Items where Year is 2018

A

Abdul Halim, Zulhelmi Alif and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah and Hamdan, Halimaton (2018) Dispersion of polymeric-coated-silica aerogel particles in unsaturated polyester composites: Effects on thermal-mechanical properties. Journal of Dispersion Science and Technology, 39 (8). pp. 1093-1101. ISSN 0193-2691

Afripin, M. A. A. and Yoon, C. K. and Tamin, Mohd. Nasir (2018) Methodology for thermal-mechanical modeling of damage and failure processes in through-silicon-vias. In: 12th International Microsystems, Packaging, Assembly and Circuits Technology Conference, IMPACT 2017, 25 October 2017 through 27 October 2017, Taipei Nangang Exhibition Center Taipei, Taiwan.

Abdul Halim, Zulhelmi Alif and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah and Halimaton, Hamdan (2018) Physiochemical and thermal properties of silica Aerogel-Poly vinyl alcohol / Core-Shell structure prepared using fluidized bed coating process for thermal insulation applications. Materials Chemistry and Physics, 215 . pp. 269-276. ISSN 0254-0584

A. Hasan, M. Danial and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lee, Min Hee (2018) Enhanced frequency domain decomposition algorithm: a review of a recent development for unbiased damping ratio estimates. Journal of Vibroengineering, 20 (5). pp. 1919-1936. ISSN 1392-8716

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2018) Comparative assessment of pid and fuzzy logic controllers with swarm optimization for semiactive suspension system. In: Intelligent Control and Automation Symposium (ICAS) 2018, 2018.

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Samin, Pakharuddin (2018) Dynamic modeling of magnetorheological damper and force tracking using particle swarm optimization. Jurnal Mekanikal, 41 (1). pp. 19-30. ISSN 2289-3873

Ab. Talib, Mat Hussin and Mohd. Samin, Pakharuddin and Mat Darus, Intan Zaurah and Khalid, Muhammad Khairul Ikhwan and Wan Rahim, Wan Abdul Malik (2018) Effect of fuzzy logic based-skyhook policy with particle swarm optimization for semi-active ride comfort. Journal of Transport System Engineering, 5 (1). pp. 1-6. ISSN 2289-9790

Ab. Wahid, Mastura and Abdul Hakim, Muhammad Syahmi and Dahalan, Md. Nizam and Mansor, Shuhaimi and Wan Ali, Wan Khairuddin and Othman, Norazila and Mat, Shabudin (2018) The effects of reynolds number on flow separation of Naca Aerofoil. In: The 1st International Symposium on Fluid Mechanics and Thermal Sciences.

Ab. Wahid, Mastura and Mat Lazim, Tholudin and Mansor, Shuhaimi and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Nusyirwan, Fahrurrazi and Mat, Shabudin and Jufri, Shafeqa Ameera (2018) Arrival time flight scheduling in Kuala Lumpur international airport. Journal of Transport System Engineering, 5 (1). pp. 31-36. ISSN 2289-9790

Ab. Wahid, Mastura and Othman, Norazila and Md. Zain, Mohd. Zarhamdy and Mohd. Nasir, Mohd. Nazri and Jamaludin, Mohd. Fadhil (2018) Design and analysis performance of fixed wing VTOL UAV. Journal of Transport System Engineering, 5 (1). pp. 17-25. ISSN 2289-9790

Abas, Mohd. Azman and Rajoo, Srithar and Zainal Abidin, Shaiful Fadzil (2018) Development of Malaysian urban drive cycle using vehicle and engine parameters. Transportation Research Part D: Transport and Environment, 63 . pp. 388-403. ISSN 1361-9209

Abbasi, Muhammad Abbas and Husain, Abdul Rashid and Alqaraghuli, Hasan (2018) Modular approach to implement model predictive control on three phase voltage source inverter. International Journal of Power Electronics and Drive Systems, 9 (2). pp. 897-904. ISSN 2088-8694

Abd. Halim, M. A. and Mohd., N. A. R. N. and Mohd. Nasir, M. N. and Dahalan, M. N. (2018) The evaluation of k-ε and k-ω turbulence models in modelling flows and performance of S-shaped diffuser. International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5161-5178. ISSN 2229-8649

Abd. Halim, Zulhelmi Alif and M. Yajid, Muhamad Azizi and Idris, M. Hasbullah and Hamdan, Halimaton (2018) Effects of rice husk derived amorphous silica on the thermal-mechanical properties of unsaturated polyester composites. Journal of Macromolecular Science, Part B: Physics, 57 (6). pp. 479-496. ISSN 0022-2348

Abd. Latif, Mohamad Zulfazli Arief and Mohd. Nasir, Rizal Effendy and Ahmad, Muhammad Aiman and Wisnoe, Wirachman and Kuntjoro, Wahyu and Ishak, Iskandar Shah and Saad, M. R. S. (2018) Comparison on the aerodynamic coefficients obtained from three different size of wind tunnel model on Baseline V set at 45 degree sweep tail angle. International Journal of Engineering and Technology(UAE), 7 (4.25). pp. 62-66. ISSN 2227-524X

Abdul Awal, Ziad and Ammoo, Mohd. Shariff and Mansor, Shuhaimi and Ishak, Iskandar Shah (2018) Rudimentary effects of emblematic gust excitations on the lift performance of coaxial helicopter rotor blades. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 24-35. ISSN 2289-7879

Abdul Hakim, Muhammad Syahmi and Ab. Wahid, Mastura and Othman, Norazila and Mat, Shabudin and Mansor, Shuhaimi and Dahalan, Md. Nizam and Wan Ali, Wan Khairuddin (2018) The effects of reynolds number on flow separation of Naca Aerofoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 56-68. ISSN 2289-7879

Abdul Hamid, Mohd. Kameil and Che Daud, Zul-Hilmi and Abu Bakar, Saiful Anuar and Abu Bakar, Abd. Rahim and Samwil, Muhammad Falqan (2018) Slurry effect on wear characteristics of brake pads. In: The 6th Asia International Conference on Tribology (ASIATRIB).

Abdul Hamid, Mohd. Kameil and Mohd. Samin, Pakharuddin and Abu Bakar, Abd. Rahim and Samion, Syahrullail and Bongfa, Binfa (2018) Friction and wear study of passenger car piston top ring sliding on cast iron material lubricated with palm fatty acid distillate (PFAD). In: The 6th Asia International Conference on Tribology (ASIATRIB).

Abdul Malik, Asmawi (2018) Structural analysis of floating offshore remote terminal for deep sea fishing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - Faculty of Engineering - School of Mechanical Engineering.

Abdul Manaf, Muhammad Zaki and Mat, Shabudin and Mansor, Shuhaimi and Nasir, Mohd. Nazri and Mat Lazim, Tholudin and Wan Ali, Wan Khairuddin and Wan Omar, Wan Zaidi and Mohd. Ali, Zurriati and Abdul-Latif, Ainullotfi and Abd. Wahid, Mastura and Dahalan, Md. Nizam and Othman, Norazila (2018) Wind tunnel experiment of UTM-LST generic light aircraft model with external store. International Review of Mechanical Engineering, 12 (3). pp. 263-271. ISSN 1970-8734

Abdul Rahim, Rabiatul Adibah (2018) Computational modelling of trabecular bone using fluid structure interaction approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Rabiatul Adibah (2018) Computational modelling of trabecular bone structure using fluid-structure interaction approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Wahid, Al Shafiq and Ahmad, Mohd. Zamani and Ahmad, Khairol Amali and Taylor, Joshua P. and Abdullah, Aisha and Al-Shafiq, Al Athirah and Ali, Arifah and Kitagawa, Keizo (2018) Demystifying ship operational availability: an innovative approach for management of in-service support contracts. Defence S and T Technical Bulletin, 11 (2). pp. 338-360. ISSN 1985-6571

Abdul Wahid, Al-Shafiq and Ahmad, Mohd. Zamani and Ahmad, Khairol Amali and Taylor, Joshua P. (2018) Availability-oriented contract management approach: A simplified view to a complex naval issue. Defence S and T Technical Bulletin, 11 (1). pp. 132-153. ISSN 1985-6571

Abdul Wahid, Al-Shafiq and Ahmad, Mohd. Zamani and Sunarsih, Sunarsih and Abdul Ghani, Mohd. Najib and Yolhamid, Yolhamid and Abu Zarim, Mohamad Abu Ubaidah Amir and Abdullah, Aisha and Ahmad Azlan, Nur Hanani (2018) Measuring severity of downtime influence factors to naval ship operational availability: a Delphi study. International Journal Of Engineering & Technology, 7 (2.29). pp. 940-946. ISSN 2227-524X

Abdullah, Hayati and Shariff, Sya Azmeela and Che Harun, Fauzan Khairi (2018) Forming interdisciplinary engineering teams using personality type differences. In: NALI Symposium 2018.

Abidin, Ummikalsom and Rusli, Muhammad Qadri (2018) Polydimethylsiloxane microchannel fabrication from 3d printed mold. Jurnal Mekanikal, 41 (2). pp. 16-22. ISSN 2289-3873

Abu Bakar, Tuty Asma and Ghandvar, Hamidreza and Moktar, Muhamad Syameel (2018) Microstructure and mechanical properties of hybrid aluminum composite with sic reinforcement. Jurnal Mekanikal, 41 (1). pp. 1-7. ISSN 2289-3873

Abu Hassan, Shukur and Mohammad Yunus, Khairunnisa and Yahya, Mohd. Yazid and Wahit, Mat Uzir and Omar, Balqis and Abdul Hanan, Umar (2018) Mechanical properties of structural epoxy after sixteen months exposure to outdoor tropical environment. In: Prosiding Seminar Nasional Cendekiawan.

Abu Husain, Nurulakmar and Mohd. Zaki, Noor Irza and Che Husin, Siti Mahirah and Abu Kassim, Khairil Anwar and Ahmad, Yahaya (2018) Updating the child restraint systems reference list for ASEAN NCAP. Journal of the Society of Automotive Engineers Malaysia, 2 (3). pp. 253-266. ISSN 2600-8092

Ahmad, A. M. and Nasir, R. E. M. and Latif, Z. A. A. and Kuntjoro, W. and Wisnoe, W. and Ishak, I. S. (2018) Aerodynamic characteristics of a cranked planform blended wing-body aircraft with 40° sweep angle. International Journal of Engineering & Technology, 7 (4.13). pp. 37-42. ISSN 2227-524X

Ahmad, Mohd. Zamani and Abdul Malik, Adi Maimun and Ismail, Nasrudin and Sunarsih, Sunarsih (2018) Four quadrant wake and thrust deduction fractions for crash stop manoeuvring. In: 11th International Conference on Marine Technology MARTEC 2018.

Ahmad, Mohd. Zamani and Md. Amin, Muhammad Firdaus and Baihaque, Muhamad Ridho and Prawira, Muhammad Zaki and Rajasekaran, Mogheshwar Gokul and Nur Zakri, Salaamin Amineen and Raffy, Mohamad Firzuan (2018) Strategic plan 2025 for port of Tanjung Pelepas in conjunction with the development of Iskandar Malaysia. In: 11th International Conference on Marine Technology MARTEC 2018.

Ahmad, Norhayati and Ramli, Irfan and Wan Hussin, Wan Nazdah and Redzuan, Norizah and Raja Ibrahim, Raja Kamarulzaman and Mohamad Zake, Nurul Syuhada and Agun, Linda (2018) Gas tunnel type plasma system for clay coating. Journal of Transport System Engineering, 5 (1). pp. 26-30. ISSN 2289-9790

Ahmad, Shamraiz and Kuan, Yew Wong (2018) Sustainability assessment in the manufacturing industry: a review of recent studies. Benchmarking, 25 (8). pp. 3162-3179. ISSN 1463-5771

Ahmad, Shamraiz and Wong, Kuan Yew and Tseng, M. T. and Wong, Wai Peng (2018) Sustainable product design and development: A review of tools, applications and research prospects. Resources, Conservation and Recycling, 132 . pp. 49-61. ISSN 0921-3449

Ahmad, Z. A. B. and Hui, K. H. and Lim, M. H. and Leong, M. S. (2018) Building Floor Vibration due to In-Building Speed Bump. Journal of Performance of Constructed Facilities, 32 (4). p. 4018051. ISSN 0887-3828

Ahmadipourroudposht, Mohaddeseh and Mohd. Yusof, Noordin and Kuan, Yew Wong (2018) QFD-operational research as an integrated method for developing product design process in one-of-a-kind production. Journal of Mechanical Engineering, 5 (SI4). pp. 153-173. ISSN 1823-5514

Aiman, Y. and Syahrullail, S. (2018) The effect of low temperature test on lubrication performance of palm kernel oil with addition of PPD as A lubricant (ASTM D4172). Journal of Mechanical Engineering, 5 (SI2). pp. 142-156. ISSN 1823-5514

Al Bakoosh, A. Ali and Idris, Jamaliah (2018) Impact of rare earth elements Ce and Pr addition on grain refinement of AA5083 alloy. Journal of Chemical Technology and Metallurgy, 53 (5). pp. 916-923. ISSN 1314-7471

Al-Bakoosh, Abdelaisalam Ali and Idris, Jamaliah (2018) Effect of cerium and praseodymium additions on impact toughness of AA5083 alloy at room temperature and sub-zero-temperature. Contemporary Engineering Sciences, 11 (52). pp. 2551-2562. ISSN 1313-6569

Al-Nusairat, Jihad Mohammad Dhahi and Habib, Farzana Quoquab and Osman, Fazilah and Rashid, Norsyila and Wan Shamsudin, Wan Muhammad Hamka and Rashid, Nur Azlina (2018) I'll do whatever i want who are you to prohibit me? A tattle tale of workplace deviance. Emerald Emerging Markets Case Studies, 8 (1). pp. 1-14. ISSN 2045-0621

Alawi, Omer A. and Che Sidik, Nor Azwadi and Xian, Hong Wei and Kean, Tung Hao and Kazi, S. N. (2018) Thermal conductivity and viscosity models of metallic oxides nanofluids. International Journal of Heat and Mass Transfer, 116 . pp. 1314-1325. ISSN 0017-9310

Alebrahim, Reza and Sharifishourabi, G. and Sharifi, S. and Alebrahim, Mahdi and Zhang, Haifeng and Yahya, Y. and Ayob, Amran (2018) Thermo-mechanical behaviour of smart composite beam under quasi-static loading. Composite Structures, 201 . pp. 21-28. ISSN 0263-8223

Ali, Mohammed A. H. and Mailah, Musa (2018) Laser simulator: a novel search graph-based path planning approach. International Journal of Advanced Robotic Systems, 15 (5). pp. 1-16. ISSN 1729-8806

Amiril, S. A. S. and Rahim, E. A. and Embong, Z. and Syahrullail, S. (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120 . pp. 520-534. ISSN 0301-679X

Ammoo, Mohd. Shariff and Ishak, Iskandar Shah and Mat, Shabudin and Daud, Mohd. Ehsanul Hafizi (2018) Design and structural analysis of a quadrotor. Jurnal Mekanikal, 41 (2). pp. 46-58. ISSN 2289-3873

Ani, F. N. and Said, N. H. and Said, M. F. M. (2018) Optimization of biodiesel production using a stirred packed-bed reactor. International Journal of Technology, 9 (2). pp. 219-228. ISSN 2086-9614

Anshar, Muhammad and Tahir, Dahlang and Makhrani, Makhrani and Ani, Farid Nasir (2018) Pyrolysis characteristic of rice husk with plastic bag as fuel for power generation by using a thermogravimetric analysis. In: 2nd International Tropical Renewable Energy Conference, i-TREC 2017, 3 October 2017 through 4 October 2017, Bali, Indonesia.

Anshar, Muhammad and Tahir, Dahlang and Makhrani, Makhrani and Ani, Farid Nasir and Kader, Ab. Saman (2018) New composites based on low-density polyethylene and rice husk: elemental and thermal characteristics. Environmental Engineering Research, 23 (3). pp. 250-257. ISSN 1226-1025

Aqilah, F. and Islam, M. and Juretic, F. and Guerrero, J. and Wood, D. and Ani, F. N. (2018) Study of mesh quality improvement for CFD analysis of an airfoil. IIUM Engineering Journal, 19 (2). pp. 203-212. ISSN 1511-788X

Ardani, M. I. and Patel, Y. and Siddiq, A. and Offer, G. J. and Martinez-Botas, R. F. (2018) Combined experimental and numerical evaluation of the differences between convective and conductive thermal control on the performance of a lithium ion cell. Energy, 144 . pp. 81-97. ISSN 0360-5442

Asus, Zainab and Aglzim, El-Hassane and Chrenko, Daniela and Che Daud, Zul Hilmi and Le-Moyne, Luis (2018) Fuel consumption evaluation of a hybrid electric car over aggressive cycles for thermal engine optimization. International Journal of Advanced and Applied Sciences, 5 (2). pp. 37-43. ISSN 2313-626X

Asus, Zainab and Che Daud, Zul-Hilmi and Mazali, Izhari Izmi and Ismail, Zulhusni (2018) Parallel hybrid electric vehicle simulation model using energetic macroscopic representation method. Journal of Transport System Engineering, 5 (1). pp. 7-12. ISSN 2289-9790

Awad, Omar I. and Mamat, R. and Ali, Obed M. and Sidik, N. A. C. and Yusaf, T. and Kadirgama, K. and Kettner, Maurice (2018) Alcohol and ether as alternative fuels in spark ignition engine: A review. Renewable & Sustainable Energy Reviews, 82 . pp. 2586-2605. ISSN 1364-0321

Azizan, Azisyahirah and Israr, Haris Ahmad and Tamin, Mohd. Nasir (2018) Effect of fiber misalignment on tensile response of unidirectional cfrp composite lamina. Journal of Advanced Research in Applied Sciences and Engineering Technology, 11 (1). pp. 23-30. ISSN 2462-1943

Azman, Nurul Farhanah and Samion, Syahrullail and Mat Sot, Mohamad Nor Hakim (2018) Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester. Green Materials, 6 (1). pp. 30-37. ISSN 2049-1220

B

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Abu Bakar, Tuty Asma and Yusof, Farazila and Umeda, Junko and Saud, Safaa N. and Ibrahim, Mustafa K. (2018) Microstructure and superelastic properties of free forged Ti-Ni shape-memory alloy. Transactions of Nonferrous Metals Society of China (English Edition), 28 (3). pp. 502-514. ISSN 1003-6326

Bakhsheshi-Rad, Hamid Reza and Hamzah, E. and Ismail, Ahmad Fauzi and Aziz, Madzlan and Daroonparvar, Mohammadreza and Parham, Shokoh and Hadisi, Zhina and Mat Yajid, Muhamad Azizi (2018) Titania-carbon nanotubes nanocomposite coating on Mg alloy: microstructural characterisation and mechanical properties. Materials Science and Technology, 34 (4). pp. 378-387. ISSN 0267-0836

Bahador, Abdollah and Hamzah, Esah and Kondoh, Katsuyoshi and Tsutsumi, Seiichiro and Umeda, Junko and Abu Bakar, Tuty Asma and Yusof, Farazila (2018) Heat-conduction-type and keyhole-type laser welding of TiNi shape-memory alloys processed by spark-plasma sintering. Materials Transactions, 59 (5). pp. 835-842. ISSN 1345-9678

Bakhsheshi-Rad, H. R. and Hamzah, E. and Staiger, Mark P. and Dias, George J. and M. Saheban, Z. Hadisi and Kashefian, M. (2018) Drug release, cytocompatibility, bioactivity, and antibacterial activity of doxycycline loaded Mg-Ca-TiO2 composite scaffold. Materials & Design, 139 . pp. 212-221. ISSN 0264-1275

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Aziz, M. and Daroonparvar, M. and Saebnoori, E. and Chamia, A. (2018) In vitro degradation behavior, antibacterial activity and cytotoxicity of TiO2-MAO/ZnHA composite coating on Mg alloy for orthopedic implants. Surface and Coatings Technology, 334 . pp. 450-460. ISSN 0257-8972

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Ismail, Ahmad Fauzi and Aziz, Madzlan and Karamian, E. and Iqbal, N. (2018) Bioactivity, in-vitro corrosion behavior, and antibacterial activity of silver-zeolites doped hydroxyapatite coating on magnesium alloy. Transactions of Nonferrous Metals Society of China, 28 (8). pp. 1553-1562. ISSN 1003-6326

Bakri, H. and Syahrom, A. and Prakoso, A. T. and Wicaksono, D. and Amarullah, M. I. and Ramadhoni, T. I. and Nugraha, R. D. (2018) The analysis of dimple geometry on artificial hip joint to the performance of lubrication. In: 1st Symposium of Emerging Nuclear Technology and Engineering Novelty, SENTEN 2018, 4-5 July 2018, Palembang, South Sumatra.

Balaji, Rajoo and Lee Siang, Hing and Yaakob, Omar and King Koh, Kho and Adnan, Faizul Amri and Ismail, N. and Ahmad, Badruzzaman and Ismail, M. and Wan Nik, W. B. (2018) Laboratory tests on heat treatment of ballast water using engine waste heat. Environmental Technology (United Kingdom), 39 (9). pp. 1102-1114. ISSN 0959-3330

Bartholomew, P. and Denner, F. and Abdol Azis, M. H. and Marquis, A. and van Wachem, B. G. M. (2018) Unified formulation of the momentum-weighted interpolation for collocated variable arrangements. Journal of Computational Physics, 375 . pp. 177-208. ISSN 0021-9991

Barzegaravval, H. and Hosseini, S. E. and Wahid, M. A. and Saat, A. (2018) Effects of fuel composition on the economic performance of biogas-based power generation systems. Applied Thermal Engineering, 128 . pp. 1543-1554. ISSN 1359-4311

Bazin, Maisarah Mohamed and Nakamura, Yuzo and Ahmad, Norhayati (2018) Chemical cleaning of microfiltration ceramic membrane fouled by nom. Jurnal Teknologi, 80 (6). pp. 95-103. ISSN 0127-9696

Behrouzi, Farshad (2018) Generic performance management system guide for Klang Valley Hospitals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Belhocien, Ali and Wan Omar, Wan Zaidi (2018) CFD modeling and simulation of aeorodynamic cooling of automotive brake rotor. Journal of Multiscale Modeling, 9 (1). p. 1750008. ISSN 1756-9737

Belhocine, A. and Wan Omar, W. Z. (2018) Computational fluid dynamics (CFD) analysis and numerical aerodynamic investigations of automotive disc brake rotor. Australian Journal of Mechanical Engineering, 16 (3). pp. 188-205. ISSN 1448-4846

Belhocine, Ali and Wan Omar, Wan Ibtisam (2018) A numerical parametric study of mechanical behavior of dry contacts slipping on the disc-pads interface. International Journal of Computers and Applications, 40 (1). pp. 42-60. ISSN 1206-212X

Belhocine, Ali and Wan Omar, Wan Zaidi (2018) CFD analysis of the brake disc and the wheel house through air flow: Predictions of Surface heat transfer coefficients (STHC) during braking operation. Journal of Mechanical Science and Technology, 32 (1). pp. 481-490. ISSN 1738-494X

Belhocine, Ali and Wan Omar, Wan Zaidi (2018) CFD modeling and computation of convective heat coefficient transfer of automotive disc brake rotors. REVISTA CIENTIFICA, 2 (29). pp. 116-128. ISSN 1940-2503

Belhocine, Ali and Wan Omar, Wan Zaidi (2018) Computational fluid dynamics modeling and computation of convective heat coefficient transfer for automotive disc brake rotors. Computational Thermal Sciences, 10 (1). pp. 1-21. ISSN 1940-2503

Belhocine, Ali and Wan Omar, Wan Zaidi (2018) Exact solution of boundary value problem describing the convective heat transfer in fully-developed laminar flow through a circular conduit. Songklanakarin Journal of Science and Technology, 40 (4). pp. 840-853. ISSN 01253-395

Belhocine, Ali and Wan Omar, Wan Zaidi (2018) Predictive modeling and simulation of the structural contact problems between the brake pads and rotor in frictional sliding contact. International Journal on Interactive Design and Manufacturing, 12 (1). pp. 63-80. ISSN 1955-2513

Boo, Koon Yan (2018) Flutter analysis of a flexibly supported wing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Daud, Zul-Hilmi and Asus, Zainab and Mazali, Izhari Izmi and Alwi, Muhammad Hafiz (2018) New battery model integrating the internal resistance as a function of temperature. Journal of Transport System Engineering, 5 (1). pp. 37-41. ISSN 2289-9790

Cheng, See-Yuan and Mansor, Shuhaimi and Abdullah, Mohd. Azman and Zakaria, Mohamad Shukri (2018) Numerical study of aerodynamic performance of hatchback vehicle fitted with a strip spoiler: effect of yaw angle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 108-118. ISSN 2289-7879

Chin, Kwang Yhee and Cheng, See Yuan and Mansor, Shuhaimi (2018) Yaw angle effect on the aerodynamic performance of hatchback vehicle fitted with combo-type spoiler. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 1-11. ISSN 2289-7879

Chiong, Meng Choung and Chong, Cheng Tung and Ng, Jo Han and Lam, Su Shiung and Tran, Manh Vu and Chong, William Woei Fong and Mohd. Jaafar, Mohammad Nazri and Medina, Agustin Valera (2018) Liquid biofuels production and emissions performance in gas turbines: A review. Energy Conversion and Management, 173 . pp. 640-658. ISSN 0196-8904

Chong, W. W. F. and Ng, J. H. and Rajoo, S. and Chong, C. T. (2018) Passenger transportation sector gasoline consumption due to friction in Southeast Asian countries. Energy Conversion and Management, 158 . pp. 346-358. ISSN 0196-8904

Chong, William Woei Fong and Hamdan, Siti Hartini (2018) Simulation of lubricant Stribeck curve for SAE grade engine lubricants. In: Proceedings of Asia International Conference on Tribology 2018.

Chong, William Woei Fong and Ng, Young Ching and Hamdan, Siti Hartini (2018) Development of a mathematical tool to predict engine in-cylinder friction. Jurnal Tribologi, 17 . pp. 29-39. ISSN 2289-7232

Chong, William Woei Fong and Zhang, Hedong (2018) Molecular dynamics simulation of load carrying properties for confined nano-meter thick lubrication film. In: Proceedings of Asia International Conference on Tribology 2018.

D

Daman Huri, Muhammad Zal Aminullah and Mat, Shabudin and Said, Mazuriah and Mansor, Shuhaimi and Dahalan, Md. Nizam and Abdul-Latif, Ainullotfi (2018) Experimental investigation on blunt-edged UTM delta wing VFE-2 configurations at low reynolds number. International Review of Mechanical Engineering, 12 (3). pp. 255-262. ISSN 1970-8734

Dandan, Muhammad Arif and Wan Yahaya, Wan Mohamad Aiman and Samion, Syahrullail (2018) The effect of fluidity of palm kernel oil with pour point depressant on coefficient of friction using fourball tribotester. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 97-107. ISSN 2289-7879

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Gupta, Rajeev Kumar and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Ghandvar, Hamidreza (2018) Investigation of Corrosion Protection Performance of Multiphase PEO (Mg2SiO4, MgO, MgAl2O4) Coatings on Mg Alloy Formed in Aluminate-Silicate- based Mixture Electrolyte. Protection of Metals and Physical Chemistry of Surfaces, 54 (3). ISSN 2070-2051

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Gupta, Rajeev Kumar and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Ghandvar, Hamidreza and Ghasemi, Ehsan (2018) Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy. Transactions of Nonferrous Metals Society of China, 28 (8). pp. 1571-1581. ISSN 1003-6326

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and M. Kay, Charls and Bakhsheshi-Rad, Hamidreza and Gupta, Rajeev Kumar and Mohd. Yusof, Noordin and Ghandvar, Hamidreza and Arshad, Azrina and Mohd. Zulkifli, Intan Syaqirah (2018) Effects of Al2O3 diffusion barrier layer (including Y-containing small oxide precipitates) and nanostructured YSZ top coat on the oxidation behavior of HVOF NiCoCrAlTaY/APS YSZ coatings at 1100 °C. Corrosion Science, 144 . pp. 13-34. ISSN 0010-938X

Dewan, Mohammud Hanif and Yaakob, Omar and Suzana, Aini (2018) Barriers for adoption of energy efficiency operational measures in shipping industry. WMU Journal of Maritime Affairs, 17 (2). pp. 169-193. ISSN 1651-436X

E

Ee, Jonathan Yong Chung and Kader, Saman B. A. (2018) Prospect of emission reduction standard for sustainable port equipment electrification. International Journal of Engineering, Transactions B: Applications, 31 (8). pp. 1347-1355. ISSN 1728-144X

Elahi, H. and Tamoor, A. and Basit, A. and Israr, A. and Swati, R. F. and Ahmad, S. and Ghafoor, U. and Shaban, M. (2018) Design and performance analysis of hybrid solar powered geyser in Islamabad, Pakistan. Thermal Science, 2018 . ISSN 0354-9836

Elbatran, A. H. and Yaakob, O. B. and Ahmed, Yasser M. and Shehata, Ahmed S. (2018) Numerical and experimental investigations on efficient design and performance of hydrokinetic Banki cross flow turbine for rural areas. Ocean Engineering, 159 . pp. 437-456. ISSN 0029-8018

F

Fan, Luming and McGrath, Dante and Cheng, Tung Chong and Mohd. Jaafar, Mohammad Nazri and Zhong, Hongtao and Hochgreb, Simone (2018) Laser-induced incandescence particle image velocimetry (LII-PIV) for two-phase flow velocity measurement. Experiments in Fluids, 59 (10). pp. 1-14. ISSN 0723-4864

Farhanah, A. N. and Syahrullail, S. (2018) Tribological behavior of the refined, bleached, and deodorized palm kernel as an alternative lubricant. Scientia Iranica, 25 (3B). pp. 1169-1178. ISSN 1026-3098

G

Ghandvar, Hamidreza and Idris, Mohd. Hasbullah and Ahmad, Norhayati and Emamy, Massoud (2018) Effect of gadolinium addition on microstructural evolution and solidification characteristics of Al-15%Mg2Si in-situ composite. Materials Characterization, 135 . pp. 57-70. ISSN 1044-5803

Ghandvar, Hamidreza and Idris, Mohd. Hasbullah and Ahmad, Norhayati (2018) Effect of hot extrusion on microstructural evolution and tensile properties of Al-15%Mg2Si-xGd in-situ composites. Journal of Alloys and Compounds, 751 . pp. 370-390. ISSN 0925-8388

Gahraz, Seyed Reza Jafari and Mat Lazim, Tholudin and Darbandi, Masoud (2018) Wind tunnel study of the effect zigzag tape on aerodynamics performance of a wind turbine airfoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 41 (1). pp. 1-9. ISSN 2289-7879

Galankashi, Masoud Rahiminezhad and Fallahiarezoudar, Ehsan and Moazzami, Anoosh and Helmi, Syed Ahmad and Mohd. Rohani, Jafri and Mohd. Yusof, Noordin (2018) An efficient integrated simulation-Taguchi approach for sales rate evaluation of a petrol station. Neural Computing & Applications, 29 (4). pp. 1073-1085. ISSN 0941-0643

Galankashi, Masoud Rahiminezhad and Helmi, Syed Ahmad and Muhammad Hisjam, Muhammad Hisjam and Abdul Rahim, Abd. Rahman (2018) Leanness assessment in automotive industry: Case study approach. International Journal of Value Chain Management, 9 (1). pp. 70-88. ISSN 1741-5357

Ghandvar, Hamidreza and Farahany, Saeed and Idris, Mohd. Hasbullah (2018) Effect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding Wear Behavior of Compocasted A356/20SiCp Composites. Tribology Transactions, 61 (1). pp. 88-99. ISSN 1040-2004

Ghazali, Nur Amirah and Mani, Mohan Prasath and Jaganathan, Saravana Kumar (2018) Green-synthesized zinc oxide nanoparticles decorated nanofibrous polyurethane mesh loaded with virgin coconut oil for tissue engineering application. Current Nanoscience, 14 (4). pp. 280-289. ISSN 1573-4137

Ghazanfari, S. A. and Wahid, M. A. (2018) Heat transfer enhancement and pressure drop for fin-and-tube compact heat exchangers with delta winglet-type vortex generators. Facta Universitatis, Series: Mechanical Engineering, 16 (2). pp. 233-247. ISSN 0354-2025

Gholami, H. and Saman, M. Z. M. and Mardani, A. and Streimikiene, D. and Sharif, S. and Zakuan, N. (2018) Proposed analytic framework for student relationship management based on a systematic review of CRM systems literature. Sustainability (Switzerland), 10 (4). ISSN 2071-1050

Gholami, H. and Saman, M. Z. M. and Sharif, S. and Zakuan, N. and Abu, F. and Awang, S. R. (2018) Critical success factors of student relationship management. Sustainability (Switzerland), 10 (12). ISSN 2071-1050

H

Hadi, Muhamad Sukri (2018) Evolutionary swarm algorithm for modelling and control of horizontal flexible plate structures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haidar, M. Ainul and Saud, Safaa N. and Hamzah, Esah (2018) Microstructure, mechanical properties, and shape memory effect of annealed Cu-Al-Ni-xCo shape memory alloys. Metallography Microstructure and Analysis, 7 (1). pp. 57-64. ISSN 2192-9262

Hwa, Lim Chin and Uday, M. B. and Ahmad, Norhayati and Mohd. Noor, Alias and Rajoo, Srithar and Zakaria, Khidzir (2018) Integration and fabrication of the cheap ceramic membrane through 3D printing technology. Materials Today Communications, 15 . pp. 134-142. ISSN 2352-4928

Hosseini, Seyed Ehsan and Barzegaravval, Hasan and Chehroudi, Bruce and Abdul Wahid, Mazlan (2018) Hybrid solar flameless combustion system: Modeling and thermodynamic analysis. Energy Conversion and Management, 166 . pp. 146-155. ISSN 0196-8904

Hadi, M. S. and Yatim, H. M. and Darus, I. Z. M. (2018) Modelling and control of horizontal flexible plate using particle swarm optimization. International Journal of Engineering and Technology(UAE), 7 (2). pp. 13-19. ISSN 2227-524X

Haghighati, Razieh and Hassan, Adnan (2018) Recognition performance of imputed control chart patterns using exponentially weighted moving average. European Journal of Industrial Engineering, 12 (5). pp. 637-660. ISSN 1751-5254

Hakimi, Saeid and Zahraee, Seyed Mojib and Mohd. Rohani, Jafri (2018) Application of Six Sigma DMAIC methodology in plain yogurt production process. International Journal of Lean Six Sigma, 9 (4). pp. 562-578. ISSN 2040-4166

Hamdan, S. H. and Chong, W. W. F. and Ng, J. H. and Chong, C.T. and Zhang, H. (2018) Nano-tribological characterisation of palm oil-based trimethylolpropane ester for application as boundary lubricant. Tribology International, 127 . pp. 1-9. ISSN 0301-679X

Hamdan, Siti Hartini and Chong, William W. F. and Din, Muhamad H. (2018) Frictional analysis on engine lubricant dilution by coconut oil and soybean oil derived biodiesel. Jurnal Tribologi, 18 . pp. 149-158. ISSN 2289-7232

Hamdzah, Myzairah (2018) Removal efficiency for heavy metals ions with granular resin and fibrous adsorbent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamid, Mohamad Rijal and Azman, Shahirah (2018) Microstrip bandpass filter for wireless local area network(wlan) application. In: Proceedings of 2018 Electrical Engineering Symposium (EES2018), 2018.

Haque, Fatima and Abas, Mohd. Azman (2018) Review of driving behavior towards fuel consumption and road safety. Jurnal Mekanikal, 41 . pp. 59-68. ISSN 2289-3873

Harun, W. S. W. and Asri, R. I. M. and Romlay, F. R. M. and Sharif, S. and Jan, N. H. M. and Tsumori, F. (2018) Surface characterisation and corrosion behaviour of oxide layer for SLMed-316L stainless steel. Journal of Alloys and Compounds, 748 . pp. 1044-1052. ISSN 0925-8388

Harun, W. S. W. and Manam, N. S. and M. S. I. N., Kamariah and Sharif, S. and Zulkifly, A. H. and Ahmad, I. and Miura, H. (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technology, 331 . pp. 74-97. ISSN 0032-5910

Hasan, Hameedah Sahib and Hussein, Mohamed and Mad Saad, Shaharil and Mat Dzahir, Mohd. Azuwan (2018) An overview of local positioning system: technologies, techniques and applications. International Journal of Engineering & Technology, 7 (3.25). pp. 1-5. ISSN 2227-524X

Hasannuddin, A. K. and Yahya, W. J. and Sarah, S. and Ithnin, A. M. and Syahrullail, S. and Sugeng, D. A. and Razak, I. F. A. and Abd. Fatah, A. Y. and Aqma, W. S. and Rahman, A. H. A. and Ramlan, N. A. (2018) Performance, emissions and carbon deposit characteristics of diesel engine operating on emulsion fuel. Energy, 142 . pp. 496-506. ISSN 0360-5442

Hashim, Farah Ellyza and Peyre, Oscar and Yaakob, Omar (2018) Preliminary design an offshore wind system for Malaysia. In: The 11th International Conference on Marine Technology, 2018.

Hassan, Adnan and Wong, Kuan Yew and Anjomshoae, Ali (2018) Inventory control policies in the humanitarian supply chain using system dynamics modeling. In: 2nd European International Conference on Industrial Engineering and Operations Management. IEOM 2018, 26 July 2018 - 27 July 2018.

Hassan, S. A. and Santulli, C. and Yahya, M. Y. B. (2018) The Potential of Biomimetics Design in the Development of Impact Resistant Material. FME Transactions, 46 (1). pp. 108-116. ISSN 1451-2092

Hassanzadeh, Reza and Yaakob, Omar and Taheri, Mohammad Mahdi and Hosseinzadeh, Mehdi and Ahmed, Yasser M. (2018) An innovative configuration for new marine current turbine. Renewable Energy, 120 . pp. 413-422. ISSN 0960-1481

Hassanzadeh, Reza and Yaakob, Omar and Gholami, Ahmadali and Pourmahdavi, Maryam and Hoseinzadeh, Mehdi and Taheri, Mohammad Mahdi and Ahmed, Yasser M. (2018) Experimental investigation of an innovative configuration for new marine current turbine. Renewable Energy, 125 . pp. 32-38. ISSN 0960-1481

Hassen, Nasir Salim and Che Sidik, Nor Azwadi (2018) Wind tunnel measurements on the effect of sprayer speed on the droplet size spectra. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1). pp. 104-111. ISSN 2289-7879

Hatema, N. and Yusof, Y. and Kadir, A. Z. A. and Mohammed, M. A. (2018) A state-of-the-art study of cloud manufacturing. International Journal of Engineering and Technology(UAE), 7 (2). ISSN 2227-524X

Henry, Zulkipli (2018) Modified reliability reassessment of fixed offshore structures for Malaysian water. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ho, Guan Sem and Hasan, Mohd. Faizal and Ani, Farid Nasir (2018) Microwave induced pyrolysis of oil palm biomass by using layer microwave absorber in reverse flow double cylinder reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 129-138. ISSN 2289-7879

Hussain, Ahmad and Mehdi, Syed Murtuza and Akhtar, Maaz and Ani, Farid Nasir and Ahmed, Iqbal (2018) Combustion performance of diesel palm olein fuel: A combined cfd and experimental approach. Arabian Journal for Science and Engineering, 43 (3). pp. 1291-1300. ISSN 2193-567X

I

Ibrahim, Mustafa Khaleel (2018) Microstructures and properties of Ti-51at.%Ni, Ti-23at.%Nb and Ti-30at.%Ta shape memory alloys fabricated by microwave sintering for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mustafa and Hamzah, Esah and Saud, Safaa and Nazim, E. M. (2018) Powder metallurgy fabrication of porous 51(at.%)Ni-Ti shape memory alloys for biomedical applications. Shape Memory and Superelasticity, 4 (2). pp. 327-336. ISSN 2199-384X

Ibrahim, Mustafa K. and N. Saud, E. Hamzah Safaa and Nazim, E. M. and Iqbal, N. and Bahador, A. (2018) Effect of Sn additions on the microstructure, mechanical properties, corrosion and bioactivity behaviour of biomedical Ti–Ta shape memory alloys. Journal of Thermal Analysis and Calorimetry, 131 (2). pp. 1165-1175. ISSN 1388-6150

Ismail, Ainaa Maya Munira and Mohd. Nawawi, Fazila and Md. Sheriff, Jamaludin (2018) Flow pattern and particle contamination in fluid flow through mitre bend. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 128-140. ISSN 2289-7879

Ibrahim, M. K. and Hamzah, E. and Saud, S. N. and Nazim, E. M. and Bahador, A. (2018) Silver additions influence on biomedical porous Ti-Ni SMAs fabricated by microwave sintering. Jurnal Teknologi, 80 (4). pp. 97-102. ISSN 0127-9696

Ibrahim, Mustafa K. and Hamzah, E. and Saud, Safaa N. and Nazim, E. M. and Bahador, A. (2018) Parameter optimization of microwave sintering porous Ti-23%Nb shape memory alloys for biomedical applications. Transactions of Nonferrous Metals Society of China, 28 (4). pp. 700-710. ISSN 1003-6326

Ibrahim, Nasiru I. and Al-Sulaiman, Fahad A. and Ani, Farid Nasir (2018) Solar absorption systems with integrated absorption energy storage-A review. Renewable & Sustainable Energy Reviews, 82 . pp. 1602-1610. ISSN 1364-0321

Idris, Mohamad Nizam and Zaharuddin, Mohd. Faridh Ahmad and Shin, Seungmin and Rhee, Sehun (2018) Estimation of weld bead geometry of gas metal arc welding process using artificial neural network. Jurnal Mekanikal, 41 (2). pp. 23-30. ISSN 2289-3873

Ishak, Iskandar Shah and Dahalan, Md. Nizam and Othman, Nurain (2018) Numerical studies on turbulence modelling of symmetrical aerofoil. In: Proceedings of 7th International Graduate Conference of Engineering, Science and Humanities (IGCESH 2018).

Ishak, Iskandar Shah and Mansor, Shuhaimi and Mat Lazim, Tholudin and Abd. Rahman, Muhammad Riza (2018) Numerical studies on unsteady helicopter main-rotor-hub assembly wake. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 190-200. ISSN 2289-7879

Isham, Mohd. Firdaus and Leong, Mohd. Salman and Lim, Meng Hee and Ahmad, Zair Asrar (2018) Variational mode decomposition for rotating machinery condition monitoring using vibration signals. Transactions of Nanjing University of Aeronautics and Astronautics, 35 (1). pp. 38-50. ISSN 1005-1120

Isham, Muhd. Firdaus and Leong, Muhammad Salman and Lim, Meng Hee and Ahmad, Zair Asrar (2018) Variational mode decomposition: mode determination method for rotating machinery diagnosis. Journal of Vibroengineering, 20 (7). pp. 2603-2621. ISSN 1392-8716

Israr, Haris Ahmad and Koh, Jian Cheng and King, Jye Wong and Khong, Wui Gan (2018) Experimental investigation of tensile properties of eco-composite laminates. Jurnal Mekanikal, 41 . pp. 53-58. ISSN 2289-3875

Israr Ahmad, Haris Ahmad and Rivallant, Samuel and Wong, King Jye (2018) Numerical modelling strategies for composite structures crashworthiness: a review. Journal of Advanced Research in Materials Science, 42 (1). pp. 8-23. ISSN 2289-7992

J

Jamei, Saeed and Abdul Malik, Adi Maimun and Che Sidik, Nor Azwadi (2018) Ground boundary layers effect on aerodynamic coefficients of a compound wing with respect to design parameters. Ocean Engineering, 164 . pp. 228-237. ISSN 0029-8018

Johar, M. and Kang, H. S. and Chong, W. W. F. and Wong, K. J. (2018) A further generalized thickness-dependent non-Fickian moisture absorption model using plain woven epoxy composites. Polymer Testing, 69 . pp. 522-527. ISSN 0142-9418

Johar, M. and Low, K. O. and Israr, H. A. and Wong, K. J. (2018) Mode I and mode II delamination of a chopped strand mat E-glass reinforced vinyl ester composite. Plastics, Rubber and Composites, 47 (9). pp. 391-397. ISSN 1465-8011

Jamali, A. and Mat Darus, I. Z. and Mohd. Samin, P. P. and Tokhi, M. O. (2018) Intelligent modeling of double link flexible robotic manipulator using artificial neural network. Journal of Vibroengineering, 20 (2). pp. 1021-1034. ISSN 1392-8716

Jamali, Annisa (2018) Modelling and intelligent control of double-link flexible robotic manipulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, N. A. and Abu Hassan, S. and Abdul Hanan, U. and Md. Amin, M. A. and Mohd. Adam, M. A. (2018) Compressive behaviour of filament wound steel/carbon hybrid composites tube. Journal of Mechanical Engineering, 15 (1). pp. 135-151. ISSN 1823-5514

Jambari, Sharoul and Yahya, Mohd. Yazid and Abdullah, Mohamed Ruslan and Jawaid, Mohammed (2018) Characterization of hybrid yarn/fabrics from of Kenaf-Kevlar fibers. Journal of Mechanical Engineering, 5 (SI4). pp. 256-267. ISSN 1823-5514

Ji, Dongxu and Wei, Zhongbao and Mazzoni, Stefano and Mengarelli, Marco and Rajoo, Srithar and Zhao, Jiyun and Pou, Josep and Romagnoli, Alessandro (2018) Thermoelectric generation for waste heat recovery: Application of a system level design optimization approach via Taguchi method. Energy Conversion and Management, 172 . pp. 507-516. ISSN 0196-8904

Jiménez-Arreola, Manuel and Pili, Roberto and Dal Magro, Fabio and Wieland, Christoph and Rajoo, Srithar and Romagnoli, Alessandro (2018) Thermal power fluctuations in waste heat to power systems: An overview on the challenges and current solutions. Applied Thermal Engineering, 134 . pp. 576-584. ISSN 1359-4311

Johar, Mahzan and Wong, King Jye and Tamin, Mohd. Nasir (2018) Non-fickian absorption characteristics of adhesive joints: capillary effects and residual properties. International Journal of Integrated Engineering, 10 (5). pp. 32-37. ISSN 2229-838X

K

Kamsah, Nazri and Mohamed Kamar, Haslinda and Alhamid, Muhammad Idrus and Wong, Keng Yinn (2018) Impacts of temperature on airborne particles in a hospital operating room. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 12-23. ISSN 2289-7879

Kong, Yi Xuan and Mohamed Kamar, Haslinda and Kamsah, Nazri (2018) Reducing air pollutants in a kitchen environment. Jurnal Mekanikal, 41 (2). pp. 37-45. ISSN 2289-3873

Kamis, Shahira Liza and Mohd. Sofi, Muhammad Lutfi Naim (2018) Fabrication of hard composite anodic films on aluminium alloy. In: Proceedings of Mechanical Engineering Research Day 2018.

Kanao Fukuda, Abu Bakar Mahat (2018) Statistical analysis of tribology-data obtained in a long repeated sliding system. In: International Conference on Engineering and Technology (ICET 2018), 2018.

Khairuddin, Muhammad Hariz and Muhamad Said, Mohd. Farid and Dahlan, Afiq Aiman and Abdul Kadir, Khairuldean (2018) Review on resonator and muffler configuration acoustics. Archives of Acoustics, 43 (3). pp. 369-384. ISSN 0137-5075

Khattak, M. A. and Mukhtar, Anique and Ghumman, Imran S. S. and Jan, Miraj Muhammad (2018) Root cause failure analysis of a domestic pressure cooker through metallurgical characterization and computational simulation. Journal of Failure Analysis and Prevention, 18 (2). pp. 274-279. ISSN 1547-7029

Khattak, M. A. and Omran, Abdoulhdi Amhmad Borhana and Khan, M. S. and Muhammad Ali, Hafiz and Nawaz, Sonia and Khan, Zarak (2018) Cost evaluation of proposed decommissioning plan of CANDU reactor. Journal of Engineering Science and Technology, 13 (10). pp. 3173-3189. ISSN 1823-4690

Koloor, S. S. R. and Khosravani, Mohammad Reza and Hamzah, R. and Tamin, Mohd. Nasir (2018) FE model-based construction and progressive damage processes of FRP composite laminates with different manufacturing processes. International Journal of Mechanical Sciences, 141 . pp. 223-235. ISSN 0020-7403

Koloor, S. S. R. and Tamin, M. N. (2018) Mode-II interlaminar fracture and crack-jump phenomenon in CFRP composite laminate materials. Composite Structures, 204 . pp. 594-606. ISSN 0263-8223

Kusrini, E. and Supramono, D. and Degirmenci, V. and Pranata, S. and Bawono, A. A. and Ani, F. N. (2018) Improving the quality of pyrolysis oil from co-firing highdensity polyethylene plastic waste and palm empty fruit bunches. International Journal of Technology, 9 (7). pp. 1498-1508. ISSN 2086-9614

L

Lam, Su Shiung and Liew, Rock Keey and Cheng, Chin Kui and Rasit, Nazaitulshila and Ooi, Chee Kuan and Ma, Nyuk Ling and Ng, Jo-Han and Lam, Wei Haur and Chong, Cheng Tung and Chase, Howard A. (2018) Pyrolysis production of fruit peel biochar for potential use in treatment of palm oil mill effluent. Journal of Environmental Management, 213 . pp. 400-408. ISSN 0301-4797

Liew, Rock Keey and Chong, Min Yee and Osazuwa, Osarieme Uyi and Nam, Wai Lun and Phang, Xue Yee and Su, Man Huan and Cheng, Chin Kui and Chong, Cheng and Lam, Su Shiung (2018) Production of activated carbon as catalyst support by microwave pyrolysis of palm kernel shell: a comparative study of chemical versus physical activation. Research on Chemical Intermediates, 44 (6). pp. 3849-3865. ISSN 0922-6168

Liew, Rock Keey and Nam, Wai Lun and Chong, Min Yee and Phang, Xue Yee and Su, Man Huan and Yek, Peter Nai Yuh and Ma, Nyuk Ling and Cheng, Chin Kui and Chong, Cheng Tung and Lam, Su Shiung (2018) Oil palm waste: An abundant and promising feedstock for microwave pyrolysis conversion into good quality biochar with potential multi-applications. Process Safety and Environmental Protection, 115 . pp. 57-69. ISSN 0957-5820

M

Md. Saad, Amir Putra and Syahrom, Ardiyansyah (2018) Study of dynamic degradation behaviour of porous magnesium under physiological environment of human cancellous bone. Corrosion Science, 131 . pp. 45-56. ISSN 0010-938X

Mad Saad, Shaharil and Mat Dzahir, Mohd. Azuwan and Hussein, Mohamed and Sahib Hasan, Alkhallatee Hameedah (2018) Graphical user interface (GUI) for local positioning system based on labview. In: 2018 10th International Conference on Software Technology and Engineering (ICSTE 2018).

Mansor, Adila Maisyarah and Lim, Jeng Shiun and Ani, Farid Nasir and Hashim, Haslenda and Ho, Wai Shin (2018) Ultimate and proximate analysis of Malaysia pineapple biomass from MD2 cultivar for biofuel application. Chemical Engineering Transactions, 63 . pp. 127-132. ISSN 2283-9216

Mas Ayu, H. and Izman, S. and Daud, R. and Shah, A. and Anwar, M. and Krishnamurithy, G. (2018) In-vitro biocompatibility study of hydroxyapatite coated on Co-Cr-Mo with oxide interlayer. Jurnal Teknologi, 80 (1). pp. 35-42. ISSN 0127-9696

Mat Darus, Intan Zaurah and Ab. Talib, Mat Hussin and Mohd. Yamin, Ahmad Hafizal and Mohd. Nor, Nur Safwati (2018) Semi-active suspension system using mr damper with particle swarm optimization skyhook controller. In: Intelligent Control and Automation Proceedings (ICAS 2018), 2018.

Mazali, Izhari Izmi and Asus, Zainab and Che Daud, Zul-Hilmi and Abu Husain, Nurulakmar and Che Kob, Mohd. Salman (2018) Clamping force adjustment system for a continuously variable transmission. Journal of Transport System Engineering, 5 (1). pp. 13-16. ISSN 2289-9790

Md. Isa, Nurun Nadhirah (2018) Tree community structure and carbon strock of a secondary forest in Universiti Teknologi Malaysia Campus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Khudzari, Ahmad Zahran and Osman, Kahar and Padzillah, Muhamad Hasbullah and Harun, Muhamad Noor and Abdul Kadir, Muhammad Rashidi and Abdul Aziz, Mohammad Azim and Abdul Rahim, Aizai Azan and Abdul Taib, Mohamed Ezani (2018) Numerical study of a left ventricular assist device (LVAD) with different blade heights and tip clearances. International Journal of Integrated Engineering, 10 (4). pp. 17-26. ISSN 2229-838X

Md. Sirat, Rozlina and Mohd. Rohani, Jafri and Ahmad, Norhayati and Mohamed Shaharoun, Awaluddin and Haron, Habibah (2018) Education level, working experiences and ergonomics training effect on ergonomics awareness and practices in Malaysia. International Journal of Engineering & Technology, 7 (3.24). pp. 12-17. ISSN 2227-524X

Md. Sirat, Rozlina and Mohd. Taib, Mohd. Firdaus and Ngadiman, Nor Hasrul Akhmal and Ma'Aram, Azanizawati and Abdul Kadir, Aini Zuhra and Hassim, Muhamad Hanafi (2018) Work study in a wood furniture manufacturing company. Jurnal Mekanikal, 41 . pp. 1-7. ISSN 2289-3873

Md. Tap, Masine and Kamsah, Nazri and Mohamed Kamar, Haslinda and Zainol, Zaina Norhallis (2018) Application bioheat equation for heat transfer model of fire fighters burn injury. 2ND ASIA INTERNATIONAL MULTIDISCIPLINARY CONFERENCE (AIMC 2018) .

Mohamad, Norlizaa and Mohd. Rohani, Jafri and Abdul Rahman, Ismail and Mat Zuki, Anis Amira (2018) Perception on prolonged standing work in electronic manufacturing company. International Journal of Engineering & Technology, 7 (3.24). pp. 44-47. ISSN 2227-524X

Mohamed Kamar, Haslinda and Mohd. Zawawi, Fazila and Kamsah, Nazri and Musa, Md. Nor and Tan, Huiyi and Wong, Keng Yinn (2018) Correlation between particulate matter and microbial counts in hospital operating rooms. Advances in Environmental Biology, 12 (10). pp. 1-4. ISSN 1995-0756

Mohammed, Fareeduddin and Hassan, Adnan and Selim, Shokri Zaki (2018) Robust optimization for closed-loop supply chain network design considering carbon policies under uncertainty. International Journal of Industrial Engineering : Theory Applications and Practice, 25 (4). pp. 526-558. ISSN 1072-4761

Mohammed, M. A. and Sudin, I. and Noor, A. M. and Rajoo, S. and Uday, M. B. and Obayes, N. H. and Omar, M. F. (2018) Investigation on microstructure and electrical properties of Bi doping Ca3Co4O9 nanoparticles synthesized by solgel process. International Journal of Engineering and Technology(UAE), 1 (2). pp. 31-33. ISSN 2227-524X

Mohammed, M. A. and Sudin, I. and Noor, A. M. and Rajoo, S. and Uday, M. B. and Obayes, N. H. and Omar, M. F. (2018) A review of thermoelectric ZnO nanostructured ceramics for energy recovery. International Journal of Engineering and Technology(UAE), 7 (2). pp. 27-30. ISSN 2227-524X

Mohd. Dahuri, Mohd. Khairul Anwar and Hussain, Mohd. Nasir and Mohd. Yusof, Nor Fasiha and Abdul Jalil, Mohamad Kasim (2018) The necessities of effective adaptive driving modification guidelines for the independent disabled driver vehicle. Journal of Engineering and Applied Sciences, 13 (9). pp. 2744-2749. ISSN 1816-949X

Mohd. Fuad, Muhammad Ariff Hanaffi and Ismail, Amir Rasyid and Nyakuma, Bemgba Bevan and Khalis, M. Y. M. N. and Hasan, Mohd. Faizal (2018) Torrefaction of densified mesocarp fibre and palm kernel shell. Renewable Energy, 122 . pp. 419-428. ISSN 0960-1481

Mohd. Fuad, Muhammad Ariff Hanaffi and Ismail, Amir Rasyid and Nyakuma, Bemgba Bevan and Khalis, M. Y. M. N. and Mohd. Faizal, Hasan (2018) Torrefaction of hydrotreated palm kernel shell and mesocarp fiber mixture. Jurnal Mekanikal, 41 (NA). pp. 69-77. ISSN 2289-3873

Mohd. Jaafar, M. N. and Safiullah, Safiullah (2018) Combustion characteristics of rice bran oil biodiesel in an oil burner. Jurnal Teknologi, 80 (3). pp. 185-192. ISSN 0127-9696

Mohd. Jaafar, Mohammad Nazri and A. Malik, Muhammad Syahiran and Othman, Norazila (2018) Combustion performance of biodiesel blended fuel from edible and nonedible sources in a liquid fuel burner. In: International Conference On Aeronautics Astronautics And Aviation 2018.

Mohd. Ja’afar, Mohammad Nazri and Mohd. Azli, Anis Athirah and Mohd. Azman, Muhammad Amirul Faiz and Said, Mazlan (2018) Combustion performance of firing biodiesel from waste cooking oil in an oil burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 45-55. ISSN 2289-7879

Mohd. Khairi, Mohd. Taufiq and Ibrahim, Sallehuddin and Md. Yunus, Mohd. Amri and Faramarzi, Mahdi (2018) Noninvasive techniques for detection of foreign bodies in food: A review. Journal of Food Process Engineering, 41 (6). ISSN 0145-8876

Mohd. Mokhtar, Mohd. Oryza and Mohd. Ja’afar, Mohammad Nazri and Yusoff, Mustafa and Said, Mazlan and Rahim, Muhammad Roslan and Abdul Malik, Muhammad Syahiran (2018) Combustion performance of syngas from biomass waste in gas burner system. Jurnal Teknologi, 80 (5). pp. 189-195. ISSN 0127-9696

Mohd. Ramli, Mohd. Hanif and Mat Dzahir, Mohd. Azuwan (2018) A new phenomenological-based rate-dependent hysteresis operator for hysteresis characterization. Journal of Mechanical Engineering, 5 (SI5). pp. 142-153. ISSN 1823-5514

Mohd. Samsuri, Saiful Farhan and Ahmad, Robiah and Zakaria, Mohd. Zakimi (2018) Comparison of evolutionary computation and empirical Penman-Monteith equation for daily and monthly reference evapotranspiration estimation in tropical region. International Journal of Integrated Engineering, 10 (7). pp. 117-129. ISSN 2229-838X

Mohd. Taib, Mohd. Firdaus and Myung, Hwan Yun and Md. Tap, Masine (2018) Association between psychosocial factors and the prevalence of musculoskeletal disorders among internship doctors in Malaysia. International Journal of Engineering & Technology, 7 (3.24). pp. 8-11. ISSN 2227-524X

Mohd. Yunos, Yushazaziah and Mohd. Ghazali, Normah and Mohamad, Maziah and Pamitran, Agus Sunjarianto and Oh, Jong Taek (2018) Prediction of the heat transfer coefficient in a small channel with the superposition and asymptotic correlations. International Journal of Air-Conditioning and Refrigeration, 26 (1). p. 1850001. ISSN 2010-1325

Mohd. Yusuff, Muhamad Faidzal and Abu Hassan, Shukur and Omar, Balqis and Zakaria, Khidzir and Ahmad Zaharuddin, Mohd. Faridh (2018) Particle size effect on optimal mixture ratio of tin slag polymer concrete under compression. Journal of Built Environment, Technology and Engineering, 5 . pp. 1-6. ISSN 0128-1003

Mohd. Zain, Mohd. Zimi and Md. Sirat, Rozlina and Md. Tap, Masine and Akhmal, Nor Hasrul and Ma’aram, Azanizawati and Abdul Kadir, Aini Zuhra (2018) Ergonomic improvements in an aircraft component manufacturing company. Jurnal Mekanikal, 41 . pp. 1-8. ISSN 2289-3873

Mohd. Zamberi, Mahanum and Ani, Farid Nasir and Abdollah, Mohd. Fadzli (2018) The application of calcium oxide from waste cockle for biodiesel production from used cooking oil via microwave heating system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2). pp. 92-100. ISSN 2289-7879

Mohd. Zulkifli, I. S. and Mat Yajid, M. A. and Idris, M. H. and Daroonpavar, M. (2018) The effect of atmospheric plasma spray distance of the agglomerated maerogel coated on Inconel 625 substrate. Corrosion Engineering Science and Technology, 53 (7). pp. 487-491. ISSN 1478-422X

Mohebbi, Mostafa and Reyhanian, Masoud and Hosseini, Vahid and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar (2018) The effect of diethyl ether addition on performance and emission of a reactivity controlled compression ignition engine fueled with ethanol and diesel. Energy Conversion and Management, 174 . pp. 779-792. ISSN 0196-8904

Mohebbi, Mostafa and Reyhanian, Masoud and Hosseini, Vahid and Muhamad Said, Mohd. Farid and Aziz, Azhar Abdul (2018) Performance and emissions of a reactivity controlled light-duty diesel engine fueled with n-butanol-diesel and gasoline. Applied Thermal Engineering, 134 . pp. 214-228. ISSN 1359-4311

Muhammad, Fahmi F. and Ketuly, Kamal Aziz and Yahya, Mohd. Yazid (2018) Effect of thermal annealing on a ternary organic solar cell incorporating Gaq3 organometallic as a boosting acceptor. Journal of Inorganic and Organometallic Polymers and Materials, 28 (1). pp. 102-109. ISSN 1574-1443

Muhammad, Nura Mu’az and Che Sidik, Nor Azwadi (2018) Applications of nanofluids and various minichannel configurations for heat transfer improvement: A review of numerical study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 49-61. ISSN 2289-7879

Mukri, Mohd. ‘Azizir-Rahim and Elias, Mohd. Syafiq and Aziz, Madzlan and Tanemura, Masaki and Mohd. Yusop, Mohd. Zamri (2018) Structural modification of pristine graphene network towards nanoporous graphene membrane: a review. Applied Membrane Science And Technology, 22 (1). pp. 31-41. ISSN 2600-9266

Muralitharan, Mugilan and Helmi, Syed Ahmad and Ismail, Kamarulafizam and Ma’aram, Azanizawati (2018) Design automotive driver seat ergonomically for Malaysian anthropometry measurement. Malaysian Journal of Public Health Medicine, 18 (2). pp. 60-65. ISSN 1675-0306

Musa, Mohamad Nor and Samion, Syahrullail and Abdul Hamid, Mohd. Kameil and Wan Yahya, Wan Mohamad Aiman and Paiman, Eriza (2018) Study on water hammer effect in turbulent flow through the pipe system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 122-133. ISSN 2289-7879

N

Nikmat Leong, Siti Asma' (2018) Rheological and stability properties of magnetorheological fluid with superparamagnetic maghemite nanoparticles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nanda, I. P. and Ali, Z. and Idris, M. H. and Arafat, A. and Pratoto, A. (2018) Shell mould strength of rice husk ash (RHA) and bentonite clays in investment casting. International Journal on Advanced Science, Engineering and Information Technology, 8 (1). pp. 291-297. ISSN 2088-5334

Nawawi, Sophan Wahyudi and Mazlan, Ahmad Abid (2018) Smart meter device for data collection and scada monitoring. In: Electrical Engineering Symposium, 14 May 2018 through 15 May 2018, FKE UTM.

Nik Aizuddin, Nik Aizuddin and Mohd. Ghazali, Normah and Mohd. Yunos, Yushazaziah (2018) Analysis of convective boiling heat transfer coefficient correlation of R290. Jurnal Mekanikal, 41 . pp. 39-44. ISSN 2289-3873

Nordin, Athirah Nadia and Mohd. Rohani, Jafri and Zainal Abidin, Noesheila and Md. Zein, Raemy and Mat Zuki, Anis Amira (2018) Knowledge, attitude and practices of musculoskeletal disorder injuries from Malaysian industries employers' perspective. International Journal of Engineering & Technology, 7 (3.24). pp. 28-31. ISSN 2227-524X

Nuswantoro, Nuzul Ficky and Gunawarman, Gunawarman and Saputra, Masagus Rifqie and Nanda, Is Prima and Idris, Mohammad Hasbullah and Arafat, Andril (2018) Microstructure analysis of hydroxyapatite coating on stainless steel 316L using investment casting technique for implant application. International Journal on Advanced Science, Engineering and Information Technology, 8 (5). pp. 2168-2174. ISSN 2088-5334

O

Osman, Khairuddin and Mohd. Faudzi, Ahmad 'Athif and Rahmat, M. F. and Chai, Chang Kai and Suzumori, Koichi (2018) Design and development of Ankle-Foot Rehabilitation Exerciser (AFRE) system using pneumatic actuator. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-8). pp. 137-143. ISSN 2180-1843

Othman, Nor Zalina and Shadan, Nur Hidayah and Solleh, Ramli and Sarmidi, Mohamad Roji (2018) Study on the effects of carbohydrate-protein-coconut oil on the viability of lactobacillus bulgaricus during spray drying, simulated gastrointestinal conditions and unrefrigerated storage by simplex-lattice mixture design. Chemical Engineering Transactions, 63 . pp. 553-558. ISSN 2283-9216

Othman, Norazila and Mansor, Shuhaimi and Ab. Wahid, Mastura and Abdul Latif, Ainullotfi and Wan Omar, Wan Zaidi and Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mohd. Nasir, Mohd. Nazri and Kanazaki, Masahiro (2018) Aircraft trajectory optimization during descent using a Kriging-model-based-genetic algorithm. Jurnal Mekanikal, 41 (2). pp. 59-63. ISSN 2289-3873

P

Pahlevanzadeh, Farhad and Bakhsheshi-Rad, Hamid Reza and Hamzah, E. (2018) In-vitro biocompatibility, bioactivity, and mechanical strength of PMMA-PCL polymer containing fluorapatite and graphene oxide bone cements. Journal of the Mechanical Behavior of Biomedical Materials, 82 . pp. 257-267. ISSN 1751-6161

Parimin, Noraziana and Hamzah, Esah and Amrin, Astuty (2018) Influence of heat treatment on the isothermal oxidation of Fe-40Ni-24Cr alloy. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (1). pp. 69-76. ISSN 2289-7879

Piroozfard, H. and Wong, K. W. and Tiwari, M. K. (2018) Reduction of carbon emission and total late work criterion in job shop scheduling by applying a multi-objective imperialist competitive algorithm. International Journal of Computational Intelligence Systems, 11 (1). pp. 805-829. ISSN 1875-6891

R

Rad, H. R. Bakhsheshi and Hamzah, E. and Abbasizadeh, N. and Najafinezhad, A. and Kashefian, M. (2018) Synthesis of novel nanostructured bredigite-amoxicillin scaffolds for bone defect treatment: cytocompatibility and antibacterial activity. Journal of Sol-Gel Science and Technology, 86 (1). pp. 83-93. ISSN 0928-0707

Rahimian Koloor, S. S. and Karimzadeh, A. and Tamin, M. N. and Abd. Shukor, M. H. (2018) Effects of sample and indenter configurations of nanoindentation experiment on the mechanical behavior and properties of ductile materials. Metals, 8 (6). ISSN 2075-4701

Rahman, M. R. A. and Saad, M. R. and Idris, A. C. and Faizal, H. M. (2018) Heat transfer of the TiO2/water nanofluid in an annulus of the finite rotating cylinders. International Journal of Heat and Technology, 36 (1). pp. 353-358. ISSN 0392-8764

Rahman, Md. Mizanur and Kamaruzaman, Natrah and Rosli, Mohd. Arif Hazim (2018) Energy efficiency in academic buildings through optimization and operational strategies. Jurnal Mekanikal, 41 (2). pp. 9-15. ISSN 2289-3873

Raja Mamat, Tengku Nur Azila and Mat Saman, Muhamad Zameri and Sharif, Safian and Simic, Vladimir and Abd. Wahab, Dzuraidah (2018) Development of a performance evaluation tool for end-of-life vehicle management system implementation using the analytic hierarchy process. Waste Management and Research, 36 (12). pp. 1210-1222. ISSN 0734-242X

Rohani, J. M. and Adeyemi, A. J. and Aziz, R. A. and Abdul Rani, M. R. (2018) The inter-rater and intra-rater reliability analysis of workplace ergonomic risk assessment. Jurnal Teknologi, 80 . pp. 53-59. ISSN 0127-9696

Roslan, Mohd. Nazrul and Yahya, Mohd. yazid and Ahmad, Zaini and Abdul Rashid, Azrin Hani (2018) Energy absorption behaviour of braided basalt composite tube. Advanced Composite Materials, 27 (5). pp. 7-11. ISSN 0924-3046

Ruslan, Ruslan Bukhari and Siow, Chee Loon and Ali, Arifah and Lee, Kee Quen and Kang, Hooi Siang (2018) Dynamic behavior of water intake riser for ocean thermal energy conversion system. Jurnal Mekanikal, 41 (1). pp. 31-38. ISSN 2289-3873

S

Sadiq, Taoheed Olohunde and Mohd. Daud, Lukmanulhakim and Idris, Jamaliah (2018) Investigation of microstructure and mechanical properties of A335 P11 main steam pipe in Stesen Janaelektrik Jambatan Connaught Power Plant, Malaysia. Transactions of the Indian Institute of Metals, 71 (10). pp. 2527-2540. ISSN 0972-2815

Sadiq, Taoheed Olohunde and Olawore, Sulaiman A. and Idris, Jamaliah (2018) Energy consideration in machining titanium alloys with a low carbon manufacturing requirements: A critical review. International Journal of Engineering Research in Africa, 35 . pp. 89-107. ISSN 1663-3571

Sadiq, Taoheed Olohunde and Siti Nursyaza, Siti Nursyaza and Idris, Jamaliah (2018) A Study of Strontium-Doped Calcium Phosphate Coated On Ti6Al4V Using Microwave Energy. Journal of Bio- and Tribo-Corrosion, 4 (3). ISSN 2198-4220

Said, N. H. and Ani, F. N. and Said, M. F. M. (2018) Emission and performance characteristics of waste cooking oil biodiesel blends in a single direct injection diesel engine. International Journal of Technology, 9 (2). pp. 238-245. ISSN 2086-9614

Salgado, M. F. and Santos, J. M. S. and Viana, G. E. D. and Porto, J. A. S. and Fontinelea, G. S. V. and Hamzah, E. and Ani, F. N. (2018) High temperature oxidation of AISI 439 ferritic stainless steel in synthetic air atmosphere. Jurnal Teknologi, 80 (5). pp. 103-111. ISSN 0127-9696

Salgado, Maria de Fatima and Abioye, Adekunle Moshood and Mat Junoh, Muhammad and Santos, João Alberto Porto and Ani, Farid Nasir (2018) Preparation of activated carbon from babassu endocarpunder microwave radiation by physical activation. In: 2nd International Tropical Renewable Energy Conference, i-TREC 2017, 3 October 2017 through 4 October 2017, Bali, Indonesia.

Salim, Yusuf and Yahya, M. Y. and Israr, H. A. and Azwan, S. and Roslan, M. N. and Abdullah, M. N. (2018) Oblique impact behavior of unidirectional natural fiber reinforced composites. International Journal of Advanced and Applied Sciences, 5 (2). pp. 161-164. ISSN 2313-626X

Salleh, I. and Md. Zain, M. Z. and Abu Bakar, A. R. (2018) Contact force and dynamic behavior of automobile wiper blade system. International Journal of Engineering & Technology, 7 (3.17). pp. 100-103. ISSN 2227-524X

Salleh, Ismasyariff and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abd. Rahim (2018) Modeling and simulation of acting force on a flexible automotive wiper. Applications Of Modelling And Simulation, 2 (2). pp. 51-58. ISSN 2600-8084

Samion, Syahrullail and A. Rahim, Erween (2018) Tribological evaluation of modified RBD palm olein-based lubricant on orthogonal cutting process. In: 2nd International Conference of Applied Sciences on Engineering, Business, Linguistic and Information Technology (Ico-Ascnitech 2018), 2018.

Samion, Syahrullail and Abdul Rahim, Erween (2018) Preparation and dispersion stability of graphite nanoparticles in palm oil. In: Proceedings of Asia International Conference on Tribology 2018, 2018.

Samion, Syahrullail and Ahmad, Mohamad Ali (2018) The performances of palm mid olein as lubricant in journal bearing application. In: Proceedings of Asia International Conference on Tribologi 2018, 2018.

Samion, Syahrullail and Fukumoto, Fukumoto and Guo, Guo and Shunpei, Kamitani and Yamabe, Yamabe (2018) Relation between coefficient of friction and surface roughness of workpiece in bulk plastic deformation. In: Proceedings of Asia International Conference on Tribology 2018, 2018.

Saputra, Hendra and Sototo, Sapto Wiratno and M., Mufti Fathonah and Istardi, Didi and Atmaja, Ardian Budi Kusuma and Mufida, Mir’atul Khusna and Koto, Jaswar (2018) Development of automatic identification system (ais) for vessels traffic monitoring in the strait of singapore and batam waterways. Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse), 51 (1). pp. 7-13. ISSN 2354-7065

Saufi, Syahril Ramadhan and Ahmad, Zair Asrar and Leong, Mohd. Salman and Meng, Hee Lim (2018) Differential evolution optimization for resilient stacked sparse autoencoder and its applications on bearing fault diagnosis. Measurement Science and Technology, 29 (12). ISSN 0957-0233

Shah, A. and Izman, S. and Ismail, S. N. F. and Mas Ayu, H. and Che Kob, C. C. and Daud, R. and Abdul Kadir, M. R. (2018) The influence of ultrasonic vibration frequency on the properties of TiN coated biomedical Ti-13Zr-13Nb. Metals, 8 (5). ISSN 2075-4701

Shah, A. and Izman, S. and Ismail, S. N. F. and Mas Ayu, H. and Daud, R. (2018) Study on adhesion strength of TiN coated biomedical Ti-13Zr-13Nb alloy. Jurnal Teknologi, 80 (2). pp. 27-35. ISSN 0127-9696

Shah, A. and Izman, S. and Ismail, Siti Nurul Fasehah and H., Mas Ayu and Daud, R. and Abdul Kadir, Mohammed Rafiq (2018) Physical Vapour Deposition on corrosion resistance: A review. ARPN Journal of Engineering and Applied Sciences, 13 (10). pp. 3515-3523.

Shaharuddin, Nur Haziqah and Mat Ali, Mohamed Sukri and Mansor, Shuhaimi and Muhamad, Sallehuddin and Zaki, Sheikh Ahmad (2018) Numerical study for flow over a realistic generic model, DrivAer, using URANS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 183-195. ISSN 2289-7879

Shahriman, A.S. and Wahid, M.A. and Saad, S.M. and Md.Zain, M.Z. and Hussein, M. and Ahmad, Z. and Yaacob, M.S. and Abdullah, M.Y. and Mohamad, M. (2018) Improving design of piezoelectric braille cell for braille display devices. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-14). pp. 107-111. ISSN 2180-1843

Shahrouz Zamani, Khalajabadi and Mat Yajid, Muhammad Azizi and Haji Abu, Aminudin and Ahmad, Norhayati and Redzuan, Norizah and Ahmad Fauzi, Ismail and Somayeh, Asadi and Iman, Noshadi (2018) In vitro biocorrosion, antibacterial and mechanical properties of silicon-containing coatings on the magnesium-hydroxiapatite nanocomposite for implant applications. Materials Chemistry and Physics, 214 . pp. 449-463. ISSN 0254-0584

Sharif, Safian and Md. Shah, Zairul Nazim and Suhaimi, Mohd. Azlan and Mohd. Khushairi, Mohd. Tanwyn and Yanis, Muhammad and Jamaludin, Khairur Rijal and Mohruni, Amrifan Saladin and Yani, Irsyadi and Razak, Zakaria (2018) Development of indirect rapid tooling inserts using metal filled epoxy for injection moulding process. In: Symposium Of Emerging Nuclear Technology And Engineering Novelty (SENTEN 2018).

Sharif, Safian and Mohd. Yusof, Noordin and Sadiq, Ibrahim Ogu and Kim, Dong Won and Park, Kyung Hee and Suhaimi, Mohd. Azlan (2018) Enhancement of thermo-physical and lubricating properties of sic nanolubricants for machining operation. In: 28th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2018, 11 June 2018-14 June 2018, Hotel Westin Columbus, United States.

Sharifi, R. and Almasi, D. and Sudin, I. B. and Abdul Kadir, M. R. and Jamshidy, L. and Amiri, S. M. and Mozaffari, H. R. and Sadeghi, M. and Roozbahani, F. and Iqbal, N. (2018) Enhancement of the Mechanical Properties of Hydroxyapatite/Sulphonated Poly Ether Ether Ketone Treated Layer for Orthopaedic and Dental Implant Application. International Journal of Biomaterials, 2018 (960719). ISSN 1687-8787

Sharma, Subash and Rosmi, Mohamad Saufi and Yaakob, Yazid and Mohd. Yusop, Mohd. Zamri and Kalita, Golap and Kitazawa, Masashi and Tanemura, Masaki (2018) In situ TEM synthesis of Y-junction carbon nanotube by electromigration induced soldering. Carbon, 132 . pp. 165-171. ISSN 0008-6223

Sheikh, Usman Ullah and Mamat, Rosbi and Hasim, Saipol Hala @ Saipol Hadi and Che Alias, Fahmi (2018) Improved human detection with occlusion handling from mobile robot. In: Proceedings of Air 2018 International Conference on Artificial Intelligence and Robotics for Industrial Applications, 28 November 2018 through 29 November 2018, Putrajaya.

Shukri, M. S. and Marwah, Omar Mohd. Faizan and Ibrahim, Mustaffa Izham and Sharif, Safian and Mohamad, Elmy Johana and Hashim, Mohd. Yussni (2018) Collapsibility of PMMA based material in direct investment casting. Journal of Advanced Manufacturing Technology, 12 (1(2)). pp. 501-512. ISSN 1985-3157

Suhaimi, Mohd. Azlan and Hisam, Muhammad Juzaili and Sharif, Safian and Yang, Gi Dong and Kim, Dong Won and Park, Kyungn Hee (2018) Effect of cryogenic machining for titanium alloy based on indirect, internal and external spray system. In: 28th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2018, 11 June 2018-14 June 2018, Hotel Westin Columbus, United States.

Suhaimi, Mohd. Azlan and Mohd. Nor, Fethma and Sharif, Safian and Hisam, Muhammad Juzaili and Abd. Rahim, Shayfull Zamree and Kurniawan, Denni (2018) Effect of short implant features on peri-implant bone biomechanics. In: The 4th International Conference On Green Design And Manufacture 2018.

Suhaimi, Mohd. Azlan and Park, Kyung Hee and Yang, Gi Dong and Sharif, Safian and Kim, Dong Won (2018) Effect of cryogenic high-speed milling of compacted graphite iron using indirect spray system. International Journal of Advanced Manufacturing Technology, 99 (9-12). pp. 2149-2157. ISSN 0268-3768

Suhardi, Bambang and Laksono, Pringgo Widyo and V. E., Andhika Ayu and Mohd. Rohani, Jafri and Tan, Shy Ching (2018) Analysis of the potential Hazard Identification and Risk Assessment (HIRA) and Hazard Operability Study (HAZOP): case study. International Journal of Engineering & Technology, 7 (3.24). pp. 1-7. ISSN 2227-524X

Syahrullail Samion, Erween Abdul Rahim (2018) Evaluation of palm oil as cold forging lubricant of aluminium a110na using double cup extrusion test. In: Proceedings of Asia International Conference on Tribology 2018, 2018.

T

Tran, Manh-Vu and Scribano, Gianfranco and Chong, Cheng and Ho, Thinh X. and Huynh, Thanh Cong (2018) Experimental and numerical investigation of explosive behavior of syngas/air mixtures. International Journal of Hydrogen Energy, 43 (16). pp. 8152-8160. ISSN 0360-3199

Tahir, Muhammad Masood and Badshah, Saeed and Hussain, Ayyaz and Khattak, Muhammad Adil (2018) Extracting accurate time domain features from vibration signals for reliable classification of bearing faults. International Journal of Advanced and Applied Sciences, 5 (1). pp. 156-163. ISSN 2313-626X

Talib, Norfazillah and Sani, Amiril S. A. and Abd. Rahim, Erween and Che Ghani, Saiful Anwar and Samion, Syahrullail (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19 (NA). pp. 98-106. ISSN 2289-7232

Tan, Chee Wayne and Pangestu Djuansjah, Joy Rizki and Idris, Mohd. Hasbullah and Wan Ali, Wan Fahmin Faiz (2018) Characterisation of Al65Cu20Fe15 quasicrystal alloy synthesised via in-situ casting under standard room ambient and argon enriched atmosphere. International Journal of Current Science, Engineering & Technology, 1 (S1). pp. 280-286. ISSN 2581-4311

W

Wahid, M. A. and Ahmad, M. Y. and Md. Zain, M. Z. and Saad, S. M. and Hussein, M. and Ahmad, Z. (2018) A preliminary study on colour recogniser for visually disabled people. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-15). pp. 139-142. ISSN 2180-1843

Wan Ali, Wan Fahmin Faiz and Abdullah, Mohamad Faizie and Shafie, Md. Rozie and Ashri, Muhammad Faiz (2018) The interaction between ZN-AL bath and wire rod with various cooling temperature : CFD approach. In: International Conference on X-Rays and Related Techniques in Research And Industry.

Wan Ali, Wan Fahmin Faiz and Kamarudin, Maslinda and Sudin, Izman and Rejab, Nik Akmar and Ain, Mohd. Fadzil and Abdullah, Norazharuddin Shah and Ahmad, Zainal Arifin (2018) Structural evolution of yig during microwave and conventional sintering at 1000ºc. International Journal of Current Science, Engineering & Technology, n/a (n/a). pp. 435-440. ISSN 2581-4311

Wan Ali, Wan Fahmin Faiz and Mokhtar, Musfirah and Djuansjah, Joy Rizki Pangestu (2018) Influence of silica content on the stabilization of tetragonal Zirconia for biomedical application. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 August 2018 - 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Wan Ali, Wan Fahmin Faiz and Othman, Mohammadariff and Abdul Halim, Ahmad Amirul Ashraf and Raja Mat, Raja Azlan Amirul and Ahmad, Hisyamuddin Hanif and Zizan, Qhairul Aidil (2018) Dielectric resonator antenna (dra) made of yttrium iron garnet for 5g applications. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018.

Wan Omar, Wan Zaidi and Belhocine, Ali (2018) Similarity solution and Runge Kutta method to a thermal boundary layer model at the entrance region of a circular tube: the Leveque approximation). Revista Cientifica Semana Academica, 31 (1). pp. 6-18. ISSN 0124-2253

Wansin, Yew and Abd. Latif, Mohd. Juzaila and Idrus Alhabshi, Sharifah Majedah and Mahmud, Jamaluddin and Abdul Kadir, Mohammed Rafiq (2018) Correlation of biomechanical properties and grayscale of articular cartilage using low-field magnetic resonance imaging. International Journal of Engineering & Technology, 7 (4.26). pp. 1-5. ISSN 2227-524X

Y

Yu, Jiyoung and Mohd. Faridh, Mohd. Faridh and Park, Young Whan (2018) Adaptive resistance spot welding method that reduces the shunting effect. Journal of Manufacturing Processes, 35 . pp. 604-613. ISSN 1526-6125

Yamamoto, Takahisa and Ishimaru, Kazuhiro and Osman, Kahar and Kori, Mohamad Ikhwan and Khudzari, Ahmad Zaharan and Yamamoto, Tsuyoshi (2018) Numerical simulation of concentration over-voltage in a polymer electrolyte fuel cell under low-hydrogen conditions. International Journal of Integrated Engineering(, 10 (4). pp. 88-94. ISSN 2229-838X

Yatim, H. M. and Darus, I. Z. M. (2018) Development of an experimental single-link flexible manipulator system. International Journal of Engineering and Technology(UAE), 7 (2). pp. 7-12. ISSN 2227-524X

Yousif, Qais Abid (2018) Minimization of two-phase flow frictional pressure drop in small channel with environmentally friendly refrigerant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Mustafa and Afripin, Mohammad Amirul Affiz (2018) Finite element modeling of bus rollover. Jurnal Mekanikal, 41 (1). pp. 45-52. ISSN 2289-3873

Z

Zahraee, S. M. and Rohani, J. M. and Wong, K. Y. (2018) Application of computer simulation experiment and response surface methodology for productivity improvement in a continuous production line: case study. Journal of King Saud University - Engineering Sciences, 30 (3). pp. 207-217. ISSN 1018-3639

Zainal Abidin, Norsheila and Mohd. Rohani, Jafri and Nordin, Athirah Nadia and Md. Zein, Raemy and Ayak, Augeny Satik (2018) Financial impact and causes of chronic musculoskeletal disease cases in Malaysia based on social security organization of Malaysia claims record. International Journal of Engineering & Technology, 7 (3.24). pp. 23-27. ISSN 2227-524X

Zaman, Shahid and Khattak, Muhammad Adil and Tamin, Mohd Nasir (2018) Effects of welding on the microstructural properties of AISI 43 ferritic stainless steel. Journal of Advanced Research in Materials Science, 44 (1). pp. 25-32. ISSN 2289-7992

Zhang, Hedong and Takeuchi, Yusuke and Chong, William W. F. and Mitsuya, Yasunaga and Fukuzawa, Kenji and Itoh, Shintaro (2018) Simultaneous in situ measurements of contact behavior and friction to understand the mechanism of lubrication with nanometer-thick liquid lubricant films. Tribology International, 127 . pp. 138-146. ISSN 0301-679X