Items where Year is 2017

Article

Yamusa, Yamusa Bello and Ahmad, Kamarudin and Abd. Rahman, Norhan (2017) Hydraulic conductivity and volumetric shrinkage properties review on gradation effect of compacted laterite soil liner. Malaysian Journal of Civil Engineering, 29 (1). pp. 153-164. ISSN 1823-7843

Mohamed Yusof, Zainab and Hamzah, Syura Fazreen and Amerudin, Shahabuddin (2017) Erosion characteristics of a medium sand breached embankment. Malaysian Journal of Civil Engineering, 29 (1). pp. 100-117. ISSN 1823-7843

Sa'adi, Z. and Shahid, S. and Chung, E. S. and Ismail, T. B. (2017) Projection of spatial and temporal changes of rainfall in Sarawak of Borneo Island using statistical downscaling of CMIP5 models. Atmospheric Research, 197 . pp. 446-460. ISSN 0169-8095

A. Halim, Hazruwani and Abdul Razak, Amall Raihan and Abdul Hamid, Abdul Rahim (2017) Supply and demand of the industrialised building system component by the CIDB registered manufacturer. The Colloquium, 11 . pp. 20-25. ISSN 2590-3969

A. Rahman, Nur Afifah and Mohd. Said, Mohd. Ismid and Azman, Shamila (2017) Carbonized green mussel shell as heavy metal removal. Malaysian Journal of Civil Engineering, 29 (1). pp. 56-86. ISSN 1823-7843

A. Rashid, A. S. and Bunawan, A. R. and Mat Said, K. N. (2017) The Deep Mixing Method: Bearing Capacity Studies. Geotechnical and Geological Engineering, 35 (4). pp. 1271-1298. ISSN 0960-3182

A. Rashid, A. S. and Bunawan, A. R. and Mat Said, K. N. (2017) The Deep Mixing Method: Bearing Capacity Studies. Geotechnical and Geological Engineering, 35 (4). pp. 1271-1298. ISSN 0960-3182

Abadi, Hooman and Omar, Balqis and Marsono, Abdul Kadir (2017) The effects of customer relationship management on customer focus in Malaysian house-building companies. International Journal of Management Research & Review, 7 (1). pp. 43-51. ISSN 2249-7196

Abd. Rahman, M. Faiz and Zakaria, Rozana (2017) Highway and life cycle costing as decision-making support system model. Indian Journal of Science and Technology, 10 (18). ISSN 0974-6846

Abd. Wahab, Muhamad Amin and Sudirman, Rubita and Omar, Camallil (2017) A review on quantitative ultrasound of fast and slow waves. Journal of Advanced Review on Scientific Research, 33 (1). pp. 13-29. ISSN 2289-7887

Abdul Hassan, Norhidayah and Ismail, Che Ros and Atan, Noor Azean and Mohd. Said, Mohd. Nihra Haruzuan (2017) The Design and Implementation of Massive Open Online Course (MOOC) For Highway Engineering Course. Pertanika Journal of Social Science and Humanities, 25 . pp. 373-382. ISSN 0128-7702

Abdul Razak, Amall Raihan and A. Halim, Hazruwani and Abdul Hamid, Abdul Rahim (2017) Construction industry prosecution cases under Malaysian occupational safety and health legislation. The Colloquium, 10 . pp. 21-27. ISSN 2590-3969

Abdul Shukor Lim, Nor Hasanah and Ariffn, Nur Farhayu and Mohd. Sam, Abdul Rahman and Shafaghat, Arezou and Keyvanfar, Ali (2017) Effect of recycled homogeneous ceramic waste aggregates on water absorption of mortar. Journal of Environmental Treatment Techniques, 5 (1). pp. 34-37. ISSN 2309-1185

Abdul Sukor, Nur Sabahiah and Mohamed Hatta, Nurulain and Hassan, Sitti Asmah (2017) Addressing the pedestrian issues in Malaysia: En route towards walking culture and sustainable city. Journal of Engineering and Applied Sciences, 12 (7). pp. 1811-1818. ISSN 1816-949X

Abidin, N. I. A. and Zakaria, R. and Pauzi, N. N. M. and Alqaifi, G. N. and Sahamir, S. R. and Shamsudin, S. M. (2017) Energy efficiency initiatives in a campus building. Chemical Engineering Transactions, 56 . pp. 1-6. ISSN 2283-9216

Abo Sabah, S. H. and Kueh, A. B. H. and Al Fasih, M. Y. (2017) Comparative low-velocity impact behavior of bio-inspired and conventional sandwich composite beams. Composites Science and Technology, 149 . pp. 64-74. ISSN 0266-3538

Abu Bakar, A. and Mohd. Ali, M. K. F. and Md. Noor, N. and Yahaya, N. and Ismail, M. and Abdullah, A. (2017) Bio-corrosion of carbon steel by sulfate reducing bacteria consortium in oil and gas pipelines. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2592-2600. ISSN 2289-4659

Abu Hasim, Ahmad Shukri and Ibrahim, Zulkifilie and Talib, Md. Hairul Nizam and Syed Mohd. Dardin, Syed Mohd. Fairuz (2017) Three-phase reference current generator employing with Kalman filter for shunt active power filter. Journal of Electrical Engineering and Technology, 12 (1). pp. 151-160. ISSN 1975-0102

Abubakar, N. and Abdullah, R. and Hong, A. K. B. and Yassin, M. S. (2017) Modified approach for transverse reinforcement design of bridge deck slab on prestressed concrete T-beam girders. International Journal of Civil Engineering and Technology, 8 (8). pp. 1239-1246. ISSN 0976-6308

Abubakar, N. and Abdullah, R. B. and Kueh, A. B. H. and Yassin, M. S. (2017) Capacity of lightly reinforced bridge deck cantilever overhang subjected to static loading. Advanced Science Letters, 23 (9). pp. 9183-9185. ISSN 1936-6612

Abubakar, N. and Abdullah, R. B. and Kueh, A. B. H. and Yassin, M. S. (2017) Transverse slab reinforcement design of concrete bridge deck: A review. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 5929-5937. ISSN 1819-6608

Aflaki, A. and Mirnezhad, M. and Ghaffarianhoseini, A. and Ghaffarianhoseini, A. and Omrany, H. and Wang, Z. H. and Akbari, H. (2017) Urban heat island mitigation strategies: a state-of-the-art review on Kuala Lumpur, Singapore and Hong Kong. Cities, 62 . pp. 131-145. ISSN 0264-2751

Ahmad, F. and Hussein, M. Z. and Husny, Z. J. and Suleiman, B. and Shima, N. and Syazwa Nabila, M. R. (2017) Delay as a challenge in prosecuting non- compliance in the halal industry. International Journal of Supply Chain Management, 6 (1). pp. 141-145. ISSN 2051-3771

Ahmad, K. A. and Abdullah, M. E. and Hassan, N. A. and Daura, H. A. and Ambak, K. (2017) A review of using porous asphalt pavement as an alternative to conventional pavement in stormwater treatment. World Journal of Engineering, 14 (5). pp. 355-362. ISSN 1708-5284

Ahmad, N. F. A. and Askari, M. and Harun, S. and Fadhil, A. B. and Demun, A. S. (2017) Sensitivity analysis of a FAO penman monteith for potential evapotranspiration to climate change. Jurnal Teknologi, 79 (7). pp. 21-30. ISSN 0127-9696

Ahmad, Nor Adilah and Zakaria, Nur Ain and Mohammad Fathilah, Nur Nabilah Farhana and Jeevaragagam, Ponselvi (2017) A review of downscaling methods for climate change impacts on water resources. Malaysian Journal of Civil Engineering, 29 (2). pp. 216-226. ISSN 1823-7843

Ahmadi, H. and Hashemifard, S. A. and Ismail, A. F. (2017) A research on CO2 removal via hollow fiber membrane contactor: The effect of heat treatment. Chemical Engineering Research and Design, 120 . pp. 218-230. ISSN 0263-8762

Ahmed, K. and Chung, E. S. and Song, J. Y. and Shahid, S. (2017) Effective design and planning specification of low impact development practices using water management analysis module (WMAM): case of Malaysia. Water (Switzerland), 9 (3). ISSN 2073-4441

Ahmed, K. and Shahid, S. and Ali, R. O. and Harun, S. B. and Wang, X. J. (2017) Evaluation of the performance of gridded precipitation products over balochistan province, pakistan. Desalination and Water Treatment, 79 . pp. 73-86. ISSN 1944-3994

Al Abadi, A. M. and Pourghasemi, H. R. and Shahid, S. and Ghalib, H. B. (2017) Spatial mapping of groundwater potential using entropy weighted linear aggregate novel approach and GIS. Arabian Journal for Science and Engineering, 42 (3). pp. 1185-1199. ISSN 1319-8025

Al Abadi, A. M. and Shahid, S. and Ghalib, H. B. and Handhal, A. M. (2017) A GIS-Based integrated fuzzy logic and analytic hierarchy process model for assessing water-harvesting zones in northeastern Maysan Governorate, Iraq. Arabian Journal for Science and Engineering, 42 (6). pp. 2487-2499. ISSN 1319-8025

Al Doboon, A. and Gutesa, M. and Valera Medina, A. and Syred, N. and Ng, J. H. and Chong, C. T. (2017) CO2-argon-steam oxy-fuel (CARSOXY) combustion for CCS inert gas atmospheres in gas turbines. Applied Thermal Engineering, 122 . pp. 350-358. ISSN 1359-4311

Al Fasih, M. Y. and Kueh, A. B. H. and Abo Sabah, S. H. and Yahya, M. Y. (2017) Influence of tows waviness and anisotropy on effective Mode I fracture toughness of triaxially woven fabric composites. Engineering Fracture Mechanics, 182 . pp. 521-536. ISSN 0013-7944

Al-Abadi, A. M. and Ghlaib, H. B. and Shahid, S. (2017) Flowing well potential zoning at Iraqi southern and western deserts using frequency ratio and geographic information system. International Journal of Environmental Science and Technology, 14 (10). pp. 2249-2268. ISSN 1735-1472

Alel, M. N. A. and Mohamad, E. T. and Abdullah, R. A. and Rahman, M. M. A. and Kadir, M. A. A. and Ramli, M. Z. (2017) Building inventory for seismic risk assessment using unmanned aerial vehicle. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

Alias, M. A. and Muda, K. and Affam, A. C. and Aris, A. and Hashim, N. (2017) The effect of divalent and trivalent cations on aggregation and surface hydrophobicity of selected microorganism. Environmental Engineering Research, 22 (1). pp. 61-74. ISSN 1226-1025

Alih, S. C. and Khelil, A. and Vafaei, M. and Halim, N. H. F. A. (2017) Analytical tension stiffening model for concrete beam reinforced with inoxydable steel. International Journal of Applied Engineering Research, 12 (15). pp. 5280-5288. ISSN 0973-4562

Alih, Sophia C. and Vafaei, Mohammadreza and Mansour, Farnoud Rahimi and Abdul Halim, Nur Hajarul Falahi (2017) A numerical study on the seismic performance of built-up battened columns. International Journal of Structural and Construction Engineering, 11 (5). pp. 609-612.

Anting, N. and Md. Din, M. F. and Iwao, K. and Ponraj, M. and Jungan, K. and Yong, L. Y. and Siang, A. J. L. M. (2017) Experimental evaluation of thermal performance of cool pavement material using waste tiles in tropical climate. Energy and Buildings, 142 . pp. 211-219. ISSN 0378-7788

Aris, M. A. M. and Chelliapan, S. and Md. Din, M. F. and Anuar, A. N. and Shahperi, R. and Selvam, S. B. and Abdullah, N. and Yuzir, A. (2017) Effect of organic loading rate (OLR) on the performance of modified anaerobic baffled reactor (MABR) supported by slanted baffles. Desalination and Water Treatment, 79 . pp. 56-63. ISSN 1944-3994

Armaghani, D. J. and Mohamad, E. T. and Narayanasamy, M. S. and Narita, N. and Yagiz, S. (2017) Development of hybrid intelligent models for predicting TBM penetration rate in hard rock condition. Tunnelling and Underground Space Technology, 63 . pp. 29-43. ISSN 0886-7798

Ashokkumar, V. and Salim, M. R. and Salam, Z. and Sivakumar, P. and Chong, C. T. and Elumalai, S. and Suresh, V. and Ani, F. N. (2017) Production of liquid biofuels (biodiesel and bioethanol) from brown marine macroalgae Padina tetrastromatica. Energy Conversion and Management, 135 . pp. 351-361. ISSN 0196-8904

Asmel, N. K. and Yusoff, A. R. M. and Sivarama Krishna, L. and Majid, Z. A. and Salmiati, S. (2017) High concentration arsenic removal from aqueous solution using nano-iron ion enrich material (NIIEM) super adsorbent. Chemical Engineering Journal, 317 . pp. 343-355. ISSN 1385-8947

Azahar, W. N. A. W. and Jaya, R. P. and Hainin, M. R. and Bujang, M. and Ngadi, N. (2017) Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil. Construction and Building Materials, 150 . pp. 653-663. ISSN 0950-0618

Aziz, M. M. A. and Hamad, A. W. and Maleka, A. M. and Jakarni, F. M. (2017) Effect of viscoelastic behaviour of cellulose oil palm fiber (COPF) modified 60-70 asphalt binder for deterioration for roads and highways. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1). pp. 38-45. ISSN 2289-7879

Bakar, A. A. and Mohd. Ali, M. K. F. and Noor, N. M. D. and Yahaya, N. and Ismail, M. and Rashid, A. S. A. (2017) Control of microbiologically influenced corrosion using ultraviolet radiation. Sains Malaysiana, 46 (8). pp. 1323-1331. ISSN 0126-6039

Balasbaneh, A. T. and Marsono, A. K. (2017) Proposing of new building scheme and composite towards global warming mitigation for Malaysia. International Journal of Sustainable Engineering, 10 (3). pp. 176-184. ISSN 1939-7038

Balasbaneh, A. T. and Marsono, A. K. (2017) Strategies for reducing greenhouse gas emissions from residential sector by proposing new building structures in hot and humid climatic conditions. Building and Environment, 124 . pp. 357-368. ISSN 0360-1323

Behbahani, H. P. and Adnan, A. and Vafaei, M. and Shad, H. and Pheng, O. P. (2017) Vibration mitigation of structures through TLCD with embedded baffles. Experimental Techniques, 41 (2). pp. 139-151. ISSN 0732-8818

Behzadafshar, K. and Sarafraz, M. E. and Hasanipanah, M. and Mojtahedi, S. F. F. and Tahir, M. M. (2017) Proposing a new model to approximate the elasticity modulus of granite rock samples based on laboratory tests results. Bulletin of Engineering Geology and the Environment . pp. 1-10. ISSN 1435-9529 (In Press)

Bello, A. A. D. and Hashim, N. B. and Haniffah, M. R. M. (2017) Predicting impact of climate change on water temperature and dissolved oxygen in tropical rivers. Climate, 5 (3). ISSN 2225-1154

Bello, A. A. D. and Hashim, N. B. and Haniffah, R. M. (2017) Impact of urbanization on the sediment yield in tropical watershed using temporal land-use changes and a GIS-based model. Journal of Water and Land Development, 34 (1). pp. 33-45. ISSN 1429-7426

Bhatawdekar, R. M. and Mohamad, E. T. and Singh, T. N. (2017) Selection of lidar technology for limestone quarry in Thailand. Journal of Mines, Metals and Fuels, 65 (7). pp. 393-399. ISSN 0022-2755

Bujang, Z. and Puan, O. C. (2017) Simulation model of traffic operations on single carriageway roads: Model calibrationand validation. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 945-950. ISSN 1819-6608

Chai, Teck Jung and Sidek, Ahmad B. and Chow, Tio Kiong and Noor, N. M. (2017) Strength properties of 10 millimeters timber clinker aggregate concrete. Malaysian Journal of Civil Engineering, 29 (3). pp. 333-344. ISSN 1823-7843

Charehzehi, A. and Chai, C. and Md. Yusof, A. and Chong, H. Y. and Loo, S. C. (2017) Building information modeling in construction conflict management. International Journal of Engineering Business Management, 9 . ISSN 1847-9790

Chow, M. F. and Yusop, Z. (2017) Quantifying the quality and sampling time of oil and grease in urban stormwater runoff. KSCE Journal of Civil Engineering, 21 (4). pp. 1087-1095. ISSN 1226-7988

Darwish, M. and Aris, A. and Puteh, M. H. and Jusoh, M. N. H. and Abdul Kadir, A. (2017) Waste bones ash as an alternative source of P for struvite precipitation. Journal of Environmental Management, 203 . pp. 861-866. ISSN 0301-4797

Dedasht, G. and Zin, R. M. and Ferwati, M. S. and Abdullahi, M. M. and Keyvanfar, A. and McCaffer, R. (2017) DEMATEL-ANP risk assessment in oil and gas construction projects. Sustainability (Switzerland), 9 (8). ISSN 2071-1050

Dehghanbanadaki, A. and Arefnia, A. and Keshtkarbanaeemoghadam, A. and Ahmad, K. and Motamedi, S. and Hashim, R. (2017) Evaluating the compression index of fibrous peat treated with different binders. Bulletin of Engineering Geology and the Environment, 76 (2). pp. 575-586. ISSN 1435-9529

Egba, Ernest Ituma and Ismail, Mohammad and Bakhary, Norhisham (2017) Temperature Response in Hardened Concrete Subjected to Tropical Rainforest Environment. ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 7 (3). pp. 1623-1628. ISSN 1792-8036

Erabee, I. K. and Ahsan, A. and Nik Daud, N. N. and Idrus, S. and Shams, S. and Md. Din, M. F. and Rezania, S. (2017) Manufacture of low-cost activated carbon using sago palm bark and date pits by physiochemical activation. BioResources, 12 (1). pp. 1916-1923. ISSN 1930-2126

Fahim Huseien, G. and Mirza, J. and Ismail, M. and Ghoshal, S. K. and Abdulameer Hussein, A. (2017) Geopolymer mortars as sustainable repair material: A comprehensive review. Renewable and Sustainable Energy Reviews, 80 . pp. 54-74. ISSN 1364-0321

Fai, C. M. and Yusop, Z. (2017) Determination of stormwater first flush treatment strategies at tropical urban catchments. Desalination and Water Treatment, 79 . pp. 196-203. ISSN 1944-3994

Faridmehr, I. and Tahir, M. M. and Lahmer, T. and Osman, M. H. (2017) Seismic Performance of Steel Frames with Semirigid Connections. Journal of Engineering (United States), 2017 . ISSN 2314-4904

Farmanbordar, Babak and Adnan, Azlan and Md. Tahir, Mahmood and Faridmehr, Iman (2017) Seismic assessment of base-isolated nuclear power plants. Advances in Computational Design, 2 (3). pp. 211-223. ISSN 2466-0523

Farouk, A. I. B. and Hassan, N. A. and Mahmud, M. Z. H. and Mirza, J. and Jaya, R .P. and Hainin, M. R. and Yaacob, H. and Yusoff, N. I. M. (2017) Effects of mixture design variables on rubber-bitumen interaction: properties of dry mixed rubberized asphalt mixture. Materials and Structures/Materiaux et Constructions, 50 (1). ISSN 1359-5997

Farouk, A. I. B. and Hassan, N. A. and Mahmud, M. Z. H. and Mirza, J. and Jaya, R. P. and Hainin, M. R. and Yaacob, H. and Yusoff, N. I. M. (2017) Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture. Materials and Structures/Materiaux et Constructions, 50 (1). ISSN 1359-5997

Feen, O. S. and Mohamed, R. N. and Mohamed, A. and Khalid, N. H. A. (2017) Effects of coarse palm oil clinker on properties of self-compacting lightweight concrete. Jurnal Teknologi, 79 (6). pp. 111-120. ISSN 0127-9696

Foong, L. K. and Rahman, N. A. and Nazir, R. (2017) Experimental study on unsaturated Double-Porosity soil phenomena under vibration effect. Jurnal Teknologi, 79 (4). pp. 65-72. ISSN 0127-9696

Fulazzaky, M. A. and Heryansyah, A. and Solaiman, M. H. and Yusop, Z. (2017) A water balance approach for assessing the potential source of water in Dohuk Dam for agricultural, domestic and tourism purposes. Water Policy, 19 (2). pp. 322-340. ISSN 1366-7017

Fulazzaky, M. A. and Nuid, M. and Aris, A. and Muda, K. (2017) Kinetics and mass transfer studies on the biosorption of organic matter from palm oil mill effluent by aerobic granules before and after the addition of Serratia marcescens SA30 in a sequencing batch reactor. Process Safety and Environmental Protection, 107 . pp. 259-268. ISSN 0957-5820

Ghaee, A. and Ghadimi, A. and Sadatnia, B. and Ismail, A. F. and Mansourpour, Z. and Khosravi, M. (2017) Synthesis and characterization of poly(vinylidene fluoride) membrane containing hydrophobic silica nanoparticles for CO2 absorption from CO2/N2 using membrane contactor. Chemical Engineering Research and Design, 120 . pp. 47-57. ISSN 0263-8762

Ghani, Z. A. and Anuar, A. N. and Majid, Z. A. and Yoneda, M. (2017) Multimedia Environmental Fate and Transport Model of dichlorodiphenyltrichloroethane (DDT): Case Study Sayong River Watershed, Johor, Malaysia. SAINS MALAYSIANA, 46 (12). pp. 2383-2392.

Hadibarata, T. and Khudhair, A. B. and Kristanti, R. A. and Kamyab, H. (2017) Biodegradation of pyrene by Candida sp. S1 under high salinity conditions. Bioprocess and Biosystems Engineering, 40 (9). pp. 1411-1418. ISSN 1615-7591

Haque, M. N. and Keramat, M. and Shahid, S. and Mohsenipour, M. and Wang, X. J. (2017) Groundwater dynamics and balance in the western part of greater Kushtia district of Bangladesh. KSCE Journal of Civil Engineering, 21 (5). pp. 1595-1606. ISSN 1226-7988

Haron, Z. and Othman, M. H. and Hee, L. M. and Yahya, K. and Hainin, M. R. and Darus, N. and Leong, M. S. (2017) Exterior noise due to interaction of tyre-thermoplastic transverse rumble strips. Archives of Acoustics, 42 (3). pp. 449-457. ISSN 0137-5075

Haron, Z. and Othman, M. H. and Hee, L. M. and Yahya, K. and Hainin, M. R. and Darus, N. and Leong, M. S. (2017) Exterior noise due to interaction of tyre-thermoplastic transverse rumble strips. Archives of Acoustics, 42 (3). pp. 449-457. ISSN 0137-5075

Hasanipanah, M. and Naderi, R. and Kashir, J. and Noorani, S. A. and Zeynali Aaq Qaleh, A. (2017) Prediction of blast-produced ground vibration using particle swarm optimization. Engineering with Computers, 33 (2). pp. 173-179. ISSN 0177-0667

Hassan, S. A. and Hounsell, N. and Shrestha, B. P. (2017) Investigating the applicability of upstream detection strategy at pedestrian signalised crossings. Promet - Traffic - Traffico, 29 (5). pp. 503-510. ISSN 0353-5320

Hassan, Sitti Asmah and Teoh, Hao Xuan and Mashros, Nordiana (2017) Characteristics of vehicle headway during rainfall at night in Pontian, Johor. Malaysian Journal of Civil Engineering, 29 (1). pp. 59-74. ISSN 1823-7843

Hassan, W. H. W. and Rashid, A. S. A. and Latifi, N. and Horpibulsuk, S. and Borhamdin, S. (2017) Strength and morphological characteristics of organic soil stabilized with magnesium chloride. Quarterly Journal of Engineering Geology and Hydrogeology, 50 (4). pp. 454-459. ISSN 1470-9236

Hirol, H. and Noor, M. A. M and Kasiman, E. H. and Hong, A. K. B. and Yusop, Z. and Yassin, A. Y. M. (2017) Meshless point interpolation formulation of kinematic wave equation for flood routing. Journal of Engineering and Applied Sciences, 12 (20). pp. 5286-5293. ISSN 1816-949X

Hun, L. T. and Wangrangsimakul, S. and Wani, W. A. and Yong, E. L. and Adnan, A. and Tan, E. T. T. and Ching, L. C. and Yin, O. S. and Abdul Azi, A. and El Enshasy, H. A. and Aziz, R. (2017) Thermal inactivation kinetics of peroxidase and polyphenol oxidase in long bean (Vigna sesquipedalis) and the changes in their activities during storage. Chiang Mai Journal of Science, 44 (3). pp. 881-890. ISSN 0125-2526

Hussain, W. A. M. and Hanim Osman, M. (2017) Measuring the strength of concrete using three different drilling test parameters. International Journal of Civil Engineering and Technology, 8 (11). pp. 569-578. ISSN 0976-6308

Hussein, A. A. and Jaya, R. P. and Abdul Hassan, N. and Yaacob, H. and Huseien, G. F. and Ibrahim, M. H. W. (2017) Performance of nanoceramic powder on the chemical and physical properties of bitumen. Construction and Building Materials, 156 . pp. 496-505. ISSN 0950-0618

Ibrahim, N. F. and Zardari, N. H. and Shirazi, S. M. and Haniffah, M. R. B. M. and Talib, S. M. and Yusop, Z. and Yusoff, S. M. A. B. M. (2017) Identification of vulnerable areas to floods in Kelantan River sub-basins by using flood vulnerability index. International Journal of GEOMATE, 12 (29). pp. 107-114. ISSN 2186-2982

Ibrahim, S. and Wahab, N. A. and Anuar, A. N. and Bob, M. (2017) Parameter optimisation of aerobic granular sludge at high temperature using response surface methodology. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1522-1529. ISSN 2088-8708

Islam, S. and Abdullah, R. A. B. and Mallick, J. (2017) Static and dynamic analysis of mansa devi hill landslide using flac3D. International Journal of Civil Engineering and Technology, 8 (11). pp. 631-643. ISSN 0976-6308

Ismail, Sarina and Abdullah, Redzuan and Ahmad, Zakiah (2017) Finite element modeling and analysis of sandwich dry floor slab. International Journal of Civil and Environmental Engineering (IJCEE), 17 (1). pp. 21-26. ISSN 2077-1258

Ismail, T. and Harun, S. and Zainudin, Z. M. and Shahid, S. and Fadzil, A. B. and Sheikh, U. U. (2017) Development of an optimal reservoir pumping operation for adaptation to climate change. KSCE Journal of Civil Engineering, 21 (1). pp. 467-476. ISSN 1226-7988

Jahed Armaghani, D. and Shoib, R. S. N. S. B. R. and Faizi, K. and Rashid, A. S. A. (2017) Developing a hybrid PSO–ANN model for estimating the ultimate bearing capacity of rock-socketed piles. Neural Computing and Applications, 28 (2). pp. 391-405. ISSN 0941-0643

Jajarmizadeh, Milad and Sidek, Lariyah Mohd. and Harun, Sobri and Salarpour, Mohsen (2017) Optimal Calibration and Uncertainty Analysis of SWAT for an Arid Climate. AIR SOIL AND WATER RESEARCH, 10 . ISSN 1178-6221

Jamal, Mohamad Hidayat and Abd. Wahab, Ahmad Khairi and Omar, Chik Maslinda and Ishak, Daeng Siti Maimunah (2017) Variations of riparian vegetation along the river corridors of Sg. Johor. Journal of Advanced Research Design, 28 (1). pp. 1-11. ISSN 2289-7984

Jameran, Aminuddin and Ibrahim, Izni Syahrizal (2017) Stress-strain relationship of fibre reinforced concrete exposed under elevated temperatures. Malaysian Journal of Civil Engineering, 29 (2). pp. 232-240. ISSN 1823-7843

Jumari, N. F. and Yusof, K. M. and Phang, F. A. (2017) How do first year Malaysian chemical engineering students approach learning? Chemical Engineering Transactions, 56 . pp. 1009-1014. ISSN 2283-9216

Kamyab, H. and Chelliapan, S. and Din, M. F. M. and Shahbazian-Yassar, R. and Rezania, S. and Khademi, T. and Kumar, A. and Azimi, M. (2017) Evaluation of Lemna minor and Chlamydomonas to treat palm oil mill effluent and fertilizer production. Journal of Water Process Engineering, 17 . pp. 229-236. ISSN 2214-7144

Kamyab, H. and Chelliapan, S. and Shahbazian Yassar, R. and Din, M. F. M. and Khademi, T. and Kumar, A. and Rezania, S. (2017) Evaluation of Lipid Content in Microalgae Biomass Using Palm Oil Mill Effluent (Pome). JOM, 69 (8). pp. 1361-1367. ISSN 1047-4838

Khandelwal, M. and Armaghani, D. J. and Faradonbeh, R. S. and Yellishetty, M. and Majid, M. Z. A. and Monjezi, M. (2017) Classification and regression tree technique in estimating peak particle velocity caused by blasting. Engineering with Computers, 33 (1). pp. 45-53. ISSN 0177-0667

Khandelwal, M. and Armaghani, D. J. and Faradonbeh, R. S. and Yellishetty, M. and Majid, M. Z. A. and Monjezi, M. (2017) Classification and regression tree technique in estimating peak particle velocity caused by blasting. Engineering with Computers, 33 (1). pp. 45-53. ISSN 0177-0667

Khandelwal, M. and Mahdiyar, A. and Armaghani, D. J. and Singh, T. N. and Fahimifar, A. and Faradonbeh, R. S. (2017) An expert system based on hybrid ICA-ANN technique to estimate macerals contents of Indian coals. Environmental Earth Sciences, 76 (11). ISSN 1866-6280

Khandelwal, M. and Shirani Faradonbeh, R. and Monjezi, M. and Armaghani, D. J. and Majid, M. Z. B. A. and Yagiz, S. (2017) Function development for appraising brittleness of intact rocks using genetic programming and non-linear multiple regression models. Engineering with Computers, 33 (1). pp. 13-21. ISSN 0177-0667

Khankhaje, E. and Rafieizonooz, M. and Salim, M. R. and Mirza, J. and Salmiati, Salmiati and Hussin, M. W. (2017) Comparing the effects of oil palm kernel shell and cockle shell on properties of pervious concrete pavement. International Journal of Pavement Research and Technology, 10 (5). pp. 383-392. ISSN 1996-6814

Khankhaje, E. and Salim, M. R. and Mirza, J. and Hussin, M. W. and Siong, H. C. and Rafieizonooz, M. (2017) Sustainable pervious concrete incorporating palm oil fuel ash as cement replacement. Chemical Engineering Transactions, 56 . pp. 445-450. ISSN 2283-9216

Khankhaje, E. and Salim, M. R. and Mirza, J. and Salmiati, Salmiati and Hussin, M. W. and Khan, R. and Rafieizonooz, M. (2017) Properties of quiet pervious concrete containing oil palm kernel shell and cockleshell. Applied Acoustics, 122 . pp. 113-120. ISSN 0003-682X

Khorami, M. and Khorami, M. and Motahar, H. and Alvansazyazdi, M. and Shariati, M. and Jalali, A. and Tahir, M. M. (2017) Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis. Structural Engineering and Mechanics, 63 (2). pp. 259-268. ISSN 1225-4568

Khorramian, Koosha and Maleki, Shervin and Shariati, Mahdi and Jalali, Abdolrahim and Tahir, M. M. (2017) Numerical analysis of tilted angle shear connectors in steel-concrete composite systems. Steel and Composite Structures, 23 (1). pp. 67-85. ISSN 1229-9367

Khoshnava, S. M. and Rostami, R. and Ismail, M. and Rahmat, A. R. and Ogunbode, B. E. (2017) Woven hybrid Biocomposite: Mechanical properties of woven kenaf bast fibre/oil palm empty fruit bunches hybrid reinforced poly hydroxybutyrate biocomposite as non-structural building materials. Construction and Building Materials, 154 . pp. 155-166. ISSN 0950-0618

Krishnen, R. and Aris, A. and Muda, K. and Hashim, N. and Ibrahim, Z. and Salim, M. R. (2017) Development of biogranules in a pilot-scale sequential batch reactor treating actual textile wastewater. Jurnal Teknologi, 79 (6). pp. 221-231. ISSN 0127-9696

Lai, G. S. and Yusob, M. H. M. and Lau, W. J. and Gohari, R. J. and Emadzadeh, D. and Ismail, A. F. and Goh, P. S. and Isloor, A. M. and Arzhandi, M. R. D. (2017) Novel mixed matrix membranes incorporated with dual-nanofillers for enhanced oil-water separation. Separation and Purification Technology, 178 . pp. 113-121. ISSN 1383-5866

Latif, S. A. and Rahman, M. S. A. and Sikiru, O. (2017) Sorptivity of Concrete Containing Iron Ore Tailings. Romanian Journal of Materials, 47 (3). pp. 336-344. ISSN 1583-3186

Latif, S. A. and Rahman, M. S. A. and Sikiru, O. (2017) Sorptivity of concrete containing iron ore tailings. Romanian Journal of Materials, 47 (3). pp. 336-344. ISSN 1583-3186

Latifi, N. and Horpibulsuk, S. and Meehan, C. L. and Abd. Majid, M. Z. and Tahir, M. M. and Mohamad, E. T. (2017) Improvement of problematic soils with biopolymer-an environmentally friendly soil stabilizer. Journal of Materials in Civil Engineering, 29 (2). ISSN 0899-1561

Lee, Y. H. and Shek, P. N. and Mohammad, S. (2017) Structural performance of reinforced interlocking blocks column. Construction and Building Materials, 142 . pp. 469-481. ISSN 0950-0618

Lee, Y. L. and Lim, J. H. and Lim, S. K. and Tan, C. S. (2017) Flexural behaviour of reinforced lightweight foamed mortar beams and slabs. KSCE Journal of Civil Engineering . pp. 1-10. ISSN 1226-7988 (In Press)

Lee, Y. Y. and Md. Din, M. F. and Ponraj, M. and Noor, Z. Z. and Iwao, K. and Chelliapan, S. (2017) Overview of Urban Heat Island (UHI) phenomenon towards human thermal comfort. Environmental Engineering and Management Journal, 16 (9). pp. 2097-2112. ISSN 1582-9596

Lew, Shong Wai and Ismail, Mohammad (2017) Distributed fibre optic as sensor for corrosion detection of steel reinforcement. Malaysian Journal of Civil Engineering, 29 (2). pp. 132-144. ISSN 1823-7843

Liang, M. and Mohamad, E. T. and Komoo, I. and Chau Khun, M. (2017) Performance evaluation of existing surface excavation assessment methods on weathered sedimentary rock. Bulletin of Engineering Geology and the Environment, 76 (1). pp. 205-218. ISSN 1435-9529

Liang, M. and Mohamad, E. T. and Komoo, I. and Ma, C. K. (2017) An excavatability classification system for surface excavation in sedimentary rocks. Bulletin of Engineering Geology and the Environment, 76 (1). pp. 241-251. ISSN 1435-9529

Lim, K. S. and Yahaya, N. and Md. Noor, N. and Mior Mohd. Tahir, S. N. F. and Paik, J. K. and Mohd., M. (2017) Effects of soil properties on the corrosion progress of X70-carbon steel in tropical region. Ships and Offshore Structures, 12 (7). pp. 991-1003. ISSN 1744-5302

Lim, Keh and Ismail, Zaleha and Yusof, Yudariah (2017) Creativity Among Geomatical Engineering Students. International Education Studies, 10 (4). ISSN 1913-9020

Lim, S. K. and Tan, C. S. and Li, B. and Ling, T. C. and Hossain, M. U. and Poon, C. S. (2017) Utilizing high volumes quarry wastes in the production of lightweight foamed concrete. Construction and Building Materials, 151 . pp. 441-448. ISSN 0950-0618

Ling, J. H. and Abd. Rahman, A. B. and Ibrahim, I. S. and Abdul Hamid, Z. (2017) An experimental study of welded bar sleeve wall panel connection under tensile, shear, and flexural loads. International Journal of Concrete Structures and Materials, 11 (3). pp. 525-540. ISSN 2234-1315

M. Najib, M. Zuhaili and Muhd. Yunus, Salmiati and Ujang, Zaini and Salim, M. Razman and Ibrahim, Zaharah (2017) Developed microbial granules containing photosynthetic pigments for carbon dioxide reduction in palm oil mill effluent. International Biodeterioration and Biodegradation, 116 . pp. 163-170. ISSN 0964-8305

Ma, C. K. and Apandi, N. M. and Sofrie, C. S. Y. and Hau, N. J. and Haur, L. W. and Awang, A. Z. and Omar, W. (2017) Closure to Discussion on “Repair and rehabilitation of concrete structures using confinement: A review” by Chau-Khun Ma, Nazirah Mohd Apandi, Sofrie Chin Siew Yung, Ng Jen hau, Lo Wen Haur, Abdullah Zawawi Awang, Wahid Omar [Construction and Building Materials 133 (2017) 502–515]. Construction and Building Materials, 142 . p. 574. ISSN 0950-0618

Ma, C. K. and Lee, Y. H. and Awang, A. Z. and Omar, W. and Mohammad, S. and Liang, M. (2017) Artificial neural network models for FRP-repaired concrete subjected to pre-damaged effects. Neural Computing and Applications . pp. 1-7. ISSN 0941-0643 (In Press)

Mahdiyar, A. and Hasanipanah, M. and Armaghani, D. J. and Gordan, B. and Abdullah, A. and Arab, H. and Majid, M. Z. A. (2017) A Monte Carlo technique in safety assessment of slope under seismic condition. Engineering with Computers, 33 (4). pp. 807-817. ISSN 0177-0667

Mahmoor, Muhammad Sazlly Nazreen and Mohamed, Roslli Noor and A. Khalid, Nur Hafizah and Ab. Kadir, Mariyana Aida and Azillah, Nazry and Ahmad Shukri, Nazirah and Mansor, Shariwati (2017) Mechanical properties of lightweight concrete using palm oil clinker: an overview. Malaysian Journal of Civil Engineering, 29 (2). pp. 254-264. ISSN 1823-7843

Mahmud, M. Z. H. and Hassan, N. A. and Hainin, M. R. and Ismail, C. R. (2017) Microstructural investigation on air void properties of porous asphalt using virtual cut section. Construction and Building Materials, 155 . pp. 485-494. ISSN 0950-0618

Majid, T. A. and Adnan, A. and Adiyanto, M. I. and Ramli, M. Z. and Ghuan, T. C. (2017) Preliminary damage assessment due to 2015 Ranau earthquake. International Journal of Civil Engineering and Geo-Environmental21802742, S. Pub . ISSN 2180-2742

Mansour, F. R. and Bakar, S. A. and Vafaei, M. and Alih, S. C. (2017) Effect of substrate surface roughness on the flexural performance of concrete slabs strengthened with a steel-fiber-reinforced concrete layer. PCI Journal, 62 (1). pp. 78-89. ISSN 8879672

Maxwell, O. and Sunday, J. E. and Oladotun, A. O. and Akinloye, A. S. and Emenike, P. C. and Tenebei, I. T. and Ofuyatan, O. and Sociis, O. T. and Wagira, H. and Mouri, H. (2017) Assessment of dose intake of toxic elements in groundwater samples from Abuja, North Central Nigeria. WIT Transactions on Ecology and the Environment, 216 . pp. 267-275. ISSN 1746-448X

Memon, R. P. and Mohd. Sam, A. R. and Abdul Awal, A. S. M. and Achekzai, L. (2017) Mechanical and thermal properties of sawdust concrete. Jurnal Teknologi, 79 (6). pp. 23-27. ISSN 0127-9696

Moayedi, H. and Mosallanezhad, M. and Nazir, R. (2017) Evaluation of Maintained Load Test (MLT) and Pile Driving Analyzer (PDA) in measuring bearing capacity of driven reinforced concrete piles. Soil Mechanics and Foundation Engineering, 54 (3). pp. 150-154. ISSN 0038-0741

Moghadasi, M. and Marsono, A. K. and Mohammadyan Yasouj, S. E. (2017) A study on rotational behaviour of a new industrialised building system connection. Steel and Composite Structures, 25 (2). pp. 245-255. ISSN 1229-9367

Mohamad, E. T. and Armaghani, D. J. and Mahdyar, A. and Komoo, I. and Kassim, K. A. and Abdullah, A. and Majid, M. Z. A. (2017) Utilizing regression models to find functions for determining ripping production based on laboratory tests. Measurement: Journal of the International Measurement Confederation, 111 . pp. 216-225. ISSN 0263-2241

Mohamad, Mazizah Ezdiani and Ibrahim, Izni Syahrizal and Abdullah, Redzuan (2017) Finite element modeling of the interfacial behavior at surface roughness concrete without the projecting steel. International Journal of Advances in Mechanical and Civil Engineering, 4 (3). pp. 125-130. ISSN 2394-2827

Mohamad, N. and Goh, W. I. and Abdullah, R. and Samad, A. A. A. and Mendis, P. and Sofi, M. (2017) Structural performance of FCS wall subjected to axial load. Construction and Building Materials, 134 . pp. 185-198. ISSN 0950-0618

Mohamad Zukri, Siti Nurul Nureda and Ab. Kadir, Mariyana Aida and Mohd. Sam, Abdul Rahman and A. Rasid, Nur Nadhira and Khiyon, M. Iqbal and Ariffin, Nur Farhayu (2017) Mechanical properties of concrete contains waste tires exposed to high temperature. Malaysian Journal of Civil Engineering, 29 (2). pp. 223-231. ISSN 1823-7843

Mohamed, A. M. and Osman, M. H. and Smaoui, H. and Mohd. Ariffin, M. A. (2017) Permeability and tensile strength of concrete with Arabic gum biopolymer. Advances in Civil Engineering, 2017 . ISSN 1687-8086

Mohamed, A. M. and Osman, M. H. and Smaoui, H. and Mohd. Ariffin, M. A. (2017) Permeability and tensile strength of concrete with Arabic gum biopolymer. Advances in Civil Engineering, 2017 . ISSN 1687-8086

Mohammadhosseini, H. and Yatim, J. M. (2017) Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures. Journal of Cleaner Production, 144 . pp. 8-21. ISSN 0959-6526

Mohammadhosseini, Hossein and Mohamad Yatim, Jamaludin (2017) Evaluation of the effective mechanical properties of concrete composites using industrial waste carpet fiber. INAE Letters, 2 (1). ISSN 2366-326X

Mohd. Ali, M. K. F. B. and Abu Bakar, A. and Md. Noor, N. and Yahaya, N. and Ismail, M. and Rashid, A. S. (2017) Hybrid soliwave technique for mitigating sulfate-reducing bacteria in controlling biocorrosion: a case study on crude oil sample. Environmental Technology (United Kingdom), 38 (19). pp. 2427-2439. ISSN 0959-3330

Mohd. Sam, Abdul Rahman and Awang, Abdullah Zawawi and Ibrahim, Izni Syahrizal and Samadi, Mostafa and Tai, Kah Mon (2017) Effects of steel fibres on concrete properties and flexural behaviour of reinforced concrete slabs. Malaysian Journal of Civil Engineering, 29 (1). pp. 25-36. ISSN 1823-7843

Mohd. Shukry, Nurul Athma and Abdul Hassan, Norhidayah and Abdullah, Mohd. Ezree and Hainin, Mohd. Rosli and Md. Yusoff, Nur Izzi and Mohamed Abdullah, Nor Asniza and Putra Jaya, Ramadhansyah (2017) Effects of diatomite as filler on the porous asphalt mixtures properties. Malaysian Journal of Civil Engineering, 29 (2). pp. 174-186. ISSN 1823-7843

Mohd. Yunus, N. Z. and Wanatowski, D. and Marto, A. and Jusoh, S. N. (2017) Strength improvement of lime-treated clay with sodium chloride. Geotechnical Research, 4 (4). pp. 192-202. ISSN 2052-6156

Mohd. Yunus, Nor Zurairahetty and Wanatowski, Dariusz and Marto, Aminaton and Jusoh, Siti Norafida (2017) Strength improvement of lime-treated clay with sodium chloride. Geotechnical Research, 4 (4). pp. 192-202. ISSN 2052-6156

Mohd.Sam, Abdul Rahman and Mohamed, Azman and Abd. Khalid, Nur Hafizah and Abd. Kadir, Mariyana Aida and Abdul Shukor Lim, Nor Hasanah and Sulaiman, Muhd. Fauzy (2017) Effects of palm oil clinker as coarse aggregates replacement in self curing concrete. Malaysian Journal of Civil Engineering, 29 (2). pp. 241-253. ISSN 1823-7843

Moideen, S. N .F. and Din, M. F. M. and Rezania, S. and Ponraj, M. and Rahman, A. A. and Pei, L. W. and Ismail, Z. and Taib, S. M. and Li, Y. Y. and Komori, D. (2017) Dual phase role of composite adsorbents made from cockleshell and natural zeolite in treating river water. Journal of King Saud University - Science . ISSN 1018-3647 (In Press)

Mokhtar, Nor Izzah and Abu Hassan, Shukur and Mohd. Sam, Abdul Rahman and Ahmad, Yusof and Omar, Balqis (2017) Bond performances between CFRP plate and steel plate to concrete prism using structural adhesives. Malaysian Journal of Civil Engineering, 29 (1). pp. 37-55. ISSN 1823-7843

Mokhtar, Nor Izzah and Abu Hassan, Shukur and Mohd. Sam, Abdul Rahman and Ahmad, Yusof and Omar, Balqis and Abd. Kader, Ab. Saman (2017) Bond durability of steel plate to concrete prism using structural adhesives after exposure to 7 years in laboratory environment. Malaysian Journal of Civil Engineering, 29 (2). pp. 265-283. ISSN 1823-7843

Muslim, N. H. and Mohamed, M. I. and Amin, Z. M. and Shafaghat, A. and Ismail, M. and Keyvanfar, A. (2017) Ground Penetrating Radar's (GPR) imaging and applications to pavement structural assessment: a case of Malaysia. Archives of Transport, 42 (2). pp. 39-51. ISSN 0866-9546

Muslim, Nurul Hidayah and Mohamed, Mohamad Ibrahim and Mat Amin, Zulkarnaini and Shafaghat, Arezou and Ismail, Mohammad and Keyvanfar, Ali (2017) Pavement structural assessment using automated tools: a comparative study. Malaysian Journal of Civil Engineering, 29 (1). pp. 129-152. ISSN 1823-7843

Naubi, I. and Zardari, N. H. and Shirazi, S. M. and Roslan, N. A. and Yusop, Z. and Haniffah, M. R. B. M. (2017) Ranking of Skudai river sub-watersheds from sustainability indices-Application of promethee method. International Journal of GEOMATE, 12 (29). pp. 124-131. ISSN 2186-2982

Naubi, Irena and Zardari, Noorul Hassan and Shirazi, Sharif Moniruzzaman and Roslan, Nur `Asikin and Yusop, Zulkifli and Mohd. Haniffah, Mohd. Ridza (2017) Ranking of Skudai river sub-watersheds from sustainability indices - application of promethee method. International Journal of GEOMATE, 12 (29). pp. 124-131. ISSN 2186-2990

Nazir, R. and Moayedi, H. and Subramaniam, P. and Ghareh, S. (2017) Ground improvement using SPVD and RPE. Arabian Journal of Geosciences, 10 (23). ISSN 1866-7511

Nazir, Ramli and Moayedi, Hossein and Subramaniam, Puspanathan and Gue, See-Sew (2017) Field performance of transition rigid piled embankment with surcharged vertical drain over soft ground. International Journal of Geomate, 13 (35). pp. 151-155. ISSN 1319-8025

Nekooie, M. A. and Mohamad, M. I. and Ismail, Z. (2017) Drag coefficient for amphibious house. Urban Water Journal, 14 (10). pp. 1045-1057. ISSN 1573-062X

Nikmatin, S. and Syafiuddin, A. and Hong Kueh, A. B. and Maddu, A. (2017) Physical, thermal, and mechanical properties of polypropylene composites filled with rattan nanoparticles. Journal of Applied Research and Technology, 15 (4). pp. 386-395. ISSN 1665-6423

Obaid, H. A. and Shahid, S. (2017) Soil erosion susceptibility of Johor River basin. Water and Environment Journal, 31 (3). pp. 367-374. ISSN 1747-6585

Oghabi, Mohsen and Khoshvatan, Mehdi and Marto, Aminaton (2017) Evaluation of the response of buried steel pipelines subjected to the strike-slip fault displacement. Civil Engineering Journal-Tehran, 3 (9). pp. 661-671. ISSN 2476-3055

Ong, P. P. and Adnan, A. and Kwok, K. C. S. and Ma, C. K. and Tiong, P. L. Y. and Pesaran Behbahani, H. (2017) Dynamic simulation of unrestrained interlocking Tuned Liquid Damper blocks. Construction and Building Materials, 144 . pp. 586-597. ISSN 0950-0618

Othman, N. and Mat, S. and Wahid, M. A. and Mansor, S. and Dahalan, M. N. (2017) Experimental study of UTM new sport complex. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1). pp. 70-78. ISSN 2289-7879

Othman, S. R. and Yahaya, N. and Noor, N. M. and Sing, L. K. and Zardasti, L. and Rashid, A. S. A. (2017) Modeling of external metal loss for corroded buried pipeline. Journal of Pressure Vessel Technology, Transactions of the ASME, 139 (3). ISSN 0094-9930

Owi, Siew Feen and Mohamed, Roslli Noor and Mohamed, Azman (2017) Fresh and hardened properties of self-compacting lightweight concrete using coarse palm oil clinker. Malaysian Journal of Civil Engineering, 29 (2). pp. 205-220. ISSN 1823-7843

Phua, M. H. and Johari, S. A. and Wong, O. C. and Ioki, K. and Mahali, M. and Nilus, R. and Coomes, D. A. and Maycock, C. R. and Hashim, M. (2017) Synergistic use of Landsat 8 OLI image and airborne LiDAR data for above-ground biomass estimation in tropical lowland rainforests. Forest Ecology and Management, 406 . pp. 163-171. ISSN 0378-1127

Rafieizonooz, M. and Salim, M. R. and Hussin, M. W. and Mirza, J. and Yunus, S. M. and Khankhaje, E. (2017) Workability, compressive strength & leachability of coal ash concrete. Chemical Engineering Transactions, 56 . pp. 439-444. ISSN 2283-9216

Rafieizonooz, M. and Salim, M. R. and Mirza, J. and Hussin, M. W. and Salmiati, Salmiati and Khan, R. and Khankhaje, E. (2017) Toxicity characteristics and durability of concrete containing coal ash as substitute for cement and river sand. Construction and Building Materials, 143 . pp. 234-246. ISSN 0950-0618

Rahman, M. T. and Hainin, M. R. and Bakar, W. A. W. A. (2017) Use of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen. Construction and Building Materials, 150 . pp. 95-104. ISSN 0950-0618

Rahman, N. A. and Yusop, Z. and ?en, Z. and Taher, S. and Kane, I. L. (2017) Mitigation of time series approach on climate change adaptation on rainfall of Wadi Al-Aqiq, Madinah, Saudi Arabia. Jurnal Teknologi, 79 (5). pp. 91-104. ISSN 0127-9696

Rahman, S. and Rahman, H. and Shahid, S. and Khan, R. U. and Jahan, N. and Ahmed, Z. U. and Khanum, R. and Ahmed, M. F. and Mohsenipour, M. (2017) The impact of cyclone Aila on the sundarban forest ecosystem. International Journal of Ecology and Development, 32 (1). pp. 88-97. ISSN 0972-9984

Raja Shoib, R. S. N. S. and Rashid, A. S. A. and Armaghani, D. J. (2017) Shaft resistance of bored piles socketed in Malaysian granite. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 170 (4). pp. 335-352. ISSN 1353-2618

Rajab, A. R. and Salim, M. R. and Sohaili, J. and Anuar, A. N. and Salmiati, Salmiati and Lakkaboyana, S. K. (2017) Performance of integrated anaerobic/aerobic sequencing batch reactor treating poultry slaughterhouse wastewater. Chemical Engineering Journal, 313 . pp. 967-974. ISSN 1385-8947

Ramli, Izzul and Hassan, Sitti Asmah and Hainin, Mohd. Rosli (2017) Parking demand analysis of rest and service area along expressway in southern region, Johor Malaysia. Malaysian Journal of Civil Engineering, 29 (1). pp. 118-128. ISSN 1823-7843

Ramli, M. Z. and Adnan, A. and Kadir, M. A. A. and Alel, M. N. A. (2017) Cost comparison for non-seismic (EC2) and seismic (EC8) design in different ductility class. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

Rashid, A. S. A. and Black, J. A. and Kueh, A .B. H. and Mohamad, H. and Noor, N. M. (2017) Bearing capacity charts of soft soil reinforced by deep mixing. Proceedings of the Institution of Civil Engineers: Ground Improvement, 170 (1). pp. 12-25. ISSN 1755-0750

Rashid, A. S. A. and Kalatehjari, R. and Hashim, N. A. and Yunus, N. M. and Noor, N. M. (2017) Determination of soil specific gravity by using partially vacuum and shaking methods. Journal of The Institution of Engineers (India): Series A, 98 (1-2). pp. 25-28. ISSN 2250-2149

Rashid, A. S. A. and Shahrin, M. I. and Horpibulsuk, S. and Hezmi, M. A. and Yunus, N. Z. M. and Borhamdin, S. (2017) Development of sustainable masonry units from flood mud soil: Strength and morphology investigations. Construction and Building Materials, 131 . pp. 682-689. ISSN 0950-0618

Rashid, A. S. A. and Shirazi, M. G. and Mohamad, H. and Sahdi, F. (2017) Bearing capacity of sandy soil treated by Kenaf fibre geotextile. Environmental Earth Sciences, 76 (12). ISSN 1866-6280

Rashid, A.S.A. and Latifi, N. and Meehan, C.L. and Manahiloh, K.N. (2017) Sustainable improvement of tropical residual soil using an environmentally friendly additive. Geotechnical and Geological Engineering, 35 (6). pp. 2613-2623. ISSN 0960-3182

Rezania, S. and Din, M. F. M. and Taib, S. M. and Mohamad, S. E. and Dahalan, F. A. and Kamyab, H. and Darajeh, N. and Ebrahimi, S. S. (2017) Ethanol production from water hyacinth (eichhornia crassipes) using various types of enhancers based on the consumable sugars. Waste and Biomass Valorization . pp. 1-8. ISSN 1877-2641 (In Press)

Rezania, Shahabaldin and Md. Din, Mohd. Fadhil and Mohamad, Shaza Eva and Sohaili, Johan and Mat Taib, Shazwin and Mohd. Yusof, Mohd. Badruddin and Kamyab, Hesam and Darajeh, Negisa and Ahsan, Amimul (2017) Review on pretreatment methods and ethanol production from cellulosic water hyacinth. BioResources, 12 (1). pp. 2108-2124. ISSN 1930-2126

Rilda, Y. and Safitri, R. and Agustien, A. and Nazir, N. and Syafiuddin, A. and Nur, H. (2017) Enhancement of Antibacterial Capability of Cotton Textiles Coated with TiO2-SiO2/Chitosan Using Hydrophobization. Journal of the Chinese Chemical Society, 64 (11). pp. 1347-1353. ISSN 0009-4536

Rilda, Y. and Safitri, R. and Agustien, A. and Nazir, N. and Syafiuddin, A. and Nur, H. (2017) Enhancement of antibacterial capability of cotton textiles coated with TiO2–SiO2/chitosan using hydrophobization. Journal of the Chinese Chemical Society, 64 (11). pp. 1347-1353. ISSN 0009-4536

Rooshdi, R. R. R. M. and Majid, M. Z. A. and Sahamir, S. R. (2017) Weightage factor for criteria of design & construction for green highway. Chemical Engineering Transactions, 56 . pp. 355-360. ISSN 2283-9216

Rostami, R. and Khoshnava, S. M. and Lamit, H. and Streimikiene, D. and Mardani, A. (2017) An overview of Afghanistan's trends toward renewable and sustainable energies. Renewable and Sustainable Energy Reviews, 76 . pp. 1440-1464. ISSN 1364-0321

Roudi, Anita Maslahati and Chelliapan, Shreeshivadasan and Armaki, Samaneh Sadat Mohseni (2017) Determination of cod and color reduction of stabilized landfill leachate by Fenton process. Journal of Asian Scientific Research, 7 (3). pp. 77-85. ISSN 223-1331

Sa'adi, Z. and Shahid, S. and Ismail, T. and Chung, E. S. and Wang, X. J. (2017) Trends analysis of rainfall and rainfall extremes in Sarawak, Malaysia using modified Mann–Kendal test. Meteorology and Atmospheric Physics . pp. 1-15. ISSN 0177-7971 (In Press)

Sahamir, S. R. and Zakaria, R. and Alqaifi, G. and Abidin, N. I. and Rooshdi, R. R. R. M. (2017) Investigation of green assessment criteria & sub-criteria for public hospital building development in Malaysia. Chemical Engineering Transactions, 56 . pp. 307-312. ISSN 2283-9216

Said, N. and Hasbullah, H. and Ismail, A. F. and Abidin, M. N. Z. and Goh, P. S. and Othman, M. H. D. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2017) The effect of air gap on the morphological properties of PSf/PVP90 membrane for hemodialysis application. Chemical Engineering Transactions, 56 . pp. 1591-1596. ISSN 2283-9216

Salem, G. S. A. and Kazama, S. and Komori, D. and Shahid, S. and Dey, N. C. (2017) Optimum abstraction of groundwater for sustaining groundwater level and reducing irrigation cost. Water Resources Management, 31 (6). pp. 1947-1959. ISSN 0920-4741

Salem, G. S. A. and Kazama, S. and Shahid, S. and Dey, N. C. (2017) Groundwater-dependent irrigation costs and benefits for adaptation to global change. Mitigation and Adaptation Strategies for Global Change . pp. 1-27. ISSN 1381-2386 (In Press)

Salem, G. S. A. and Kazama, S. and Shahid, S. and Dey, N. C. (2017) Impact of temperature changes on groundwater levels and irrigation costs in a groundwater-dependent agricultural region in Northwest Bangladesh. Hydrological Research Letters, 11 (1). pp. 85-91. ISSN 1882-3416

Salman, S. A. and Shahid, S. and Ismail, T. and Rahman, N. B. A. and Wang, X. and Chung, E. S. (2017) Unidirectional trends in daily rainfall extremes of Iraq. Theoretical and Applied Climatology, 134 . pp. 1165-1177. ISSN 0177-798X

Salman, S. A. and Shahid, S. and Ismail, T. and Chung, E. S. and Al Abadi, A. M. (2017) Long-term trends in daily temperature extremes in Iraq. Atmospheric Research, 198 . pp. 97-107. ISSN 0169-8095

Sam, A. R. M. and Usman, J. and Sumadi, S. R. (2017) Properties of binary and ternary blended cement mortars containing palm oil fuel ash and metakaolin. Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an, 40 (2). pp. 170-178. ISSN 0253-3839

Samavati, A. and Samavati, Z. and Ismail, A. F. and Othman, M. H. D. and Rahman, M. A. and Zulhairun, A. K. and Amiri, I. S. (2017) Structural, optical and electrical evolution of Al and Ga co-doped ZnO/SiO2/glass thin film: Role of laser power density. RSC Advances, 7 (57). pp. 35858-35868. ISSN 2046-2069

Sani, M. S. H. M. and Muftah, F. and Ismail, M. I. and Tan, C. S. (2017) Mechanical behaviour of support system for cold-formed steel channel stub column. Advanced Science Letters, 23 (5). pp. 3864-3868. ISSN 1936-6612

Saranya, R. and Arthanareeswaran, G. and Ismail, A. F. and Reddy, N. L. and Shankar, M. V. and Kweon, J. (2017) Efficient rejection of organic compounds using functionalized ZSM-5 incorporated PPSU mixed matrix membrane. RSC Advances, 7 (25). pp. 15536-15552. ISSN 2046-2069

Sattar, G. S. and Mohsenipour, M. and Alam, A. and Shahid, S. (2017) Interference and inefficiency of water wells: a constrain of water conservation in Bangladesh. ISH Journal of Hydraulic Engineering, 23 (2). pp. 220-226. ISSN 0971-5010

Sa’adi, Z. and Shahid, S. and Ismail, T. and Chung, E. S. and Wang, X. J. (2017) Distributional changes in rainfall and river flow in Sarawak, Malaysia. Asia-Pacific Journal of Atmospheric Sciences, 53 (4). pp. 489-500. ISSN 1976-7633

Shahnazar, A. and Nikafshan Rad, H. and Hasanipanah, M. and Tahir, M. M. and Jahed Armaghani, D. and Ghoroqi, M. (2017) A new developed approach for the prediction of ground vibration using a hybrid PSO-optimized ANFIS-based model. Environmental Earth Sciences, 76 (15). ISSN 1866-6280

Sing, L. K. and Azraai, S. N. A. and Yahaya, N. and Zardasti, L. and Md Noor, N. (2017) Strength development of epoxy grouts for pipeline rehabilitation. Jurnal Teknologi, 79 (1). pp. 9-14. ISSN 0127-9696

Sobhanmanesh, Ali and Nazir, Ramli and Soon, Tan Choy and Syamsunur, Deprizon (2017) Numerical modeling of centrifuge test procedure for different embankment cases. International Journal of Geomate, 13 (35). pp. 144-150. ISSN 2186-2982

Sohaili, Johan and Kamsano, Nur Suraya and Md. Din, Mohd Fadhil and Supian, Nur Sumayyah (2017) A preliminary study on usage of human scalp hair (HSH) waste to control invasive activity of wild hog. The Colloquium, 9 . pp. 5-8. ISSN 2590-3969

Soufeiani, L. and Ghadyani, G. and Hong Kueh, A. B. and Nguyen, K. T. Q. (2017) The effect of laminate stacking sequence and fiber orientation on the dynamic response of FRP composite slabs. Journal of Building Engineering, 13 . pp. 41-52. ISSN 2352-7102

Sulaiman, M. F. and Ma, C. and Apandi, N. M. and Chin, S. and Awang, A. Z. and Mansur, S. A. and Omar, W. (2017) A Review on Bond and Anchorage of Confined High-strength Concrete. Structures, 11 . pp. 97-109. ISSN 2352-0124

Sulaiman, Muhd. Fauzy and Redzuan, Faisal Amsyar and Chau, Khun Ma and Awang, Abdullah Zawawi and Omar, Wahid (2017) Bond between SSTT confined concrete and ribbed steel reinforcement bar. Transactions on Science and Technology, 4 (3). pp. 194-201. ISSN 2289-8786

Syafiuddin, A. and Salmiati, S. and Salim, M. R. and Kueh, A. B. H. and Hadibarata, T. and Nur, H. (2017) A Review of Silver Nanoparticles: Research Trends, Global Consumption, Synthesis, Properties, and Future Challenges. Journal of the Chinese Chemical Society, 64 (7). pp. 732-756. ISSN 0009-4536

Syafiuddin, A. and Salmiati, Salmiati and Hadibarata, T. and Salim, M. R. and Kueh, A. B. H. and Sari, A. A. (2017) A purely green synthesis of silver nanoparticles using Carica papaya, Manihot esculenta, and Morinda citrifolia: synthesis and antibacterial evaluations. Bioprocess and Biosystems Engineering, 40 (9). pp. 1349-1361. ISSN 1615-7591

Taheri, K. and Hasanipanah, M. and Golzar, S. B. and Majid, M. Z. A. (2017) A hybrid artificial bee colony algorithm-artificial neural network for forecasting the blast-produced ground vibration. Engineering with Computers, 33 (3). pp. 689-700. ISSN 0177-0667

Talaiekhozani, A. and Nematzadeh, S. and Eskandari, Z. and Aleebrahim Dehkordi, A. and Rezania, S. (2017) Gaseous emissions of landfill and modeling of their dispersion in the atmosphere of Shahrekord, Iran. Urban Climate . ISSN 2212-0955 (In Press)

Tan, M. L. and Ibrahim, A. L. and Cracknell, A. P. and Yusop, Z. (2017) Changes in precipitation extremes over the Kelantan River Basin, Malaysia. International Journal of Climatology, 37 (10). pp. 3780-3797. ISSN 0899-8418

Tay, Lay Ting and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati (2017) Resilient modulus of double layer porous asphalt: application of alkali treated coconut shell and fiber as aggregate replacement. Malaysian Journal of Civil Engineering, 29 (1). pp. 187-194. ISSN 1823-7843

Thakur, S. and Singh, L. and Zularisam, A. W. and Sakinah, M. and Din, M. F. M. (2017) Lead induced oxidative stress and alteration in the activities of antioxidative enzymes in rice shoots. Biologia Plantarum, 61 (3). pp. 595-598. ISSN 0006-3134

Thanalechumi, P. and Mohd Yusoff, A. R. and Yusop, Z. (2017) A simple voltammetric determination of metsulfuron-methyl in water samples using differential pulse cathodic stripping voltammetry. Journal of Pesticide Science, 42 (2). pp. 39-44. ISSN 1348-589X

Tonnizam Mohamad, E. and Jahed Armaghani, D. and Ghoroqi, M. and Yazdani Bejarbaneh, B. and Ghahremanians, T. and Abd. Majid, M. Z. and Tabrizi, O. (2017) Ripping production prediction in different weathering zones according to field data. Geotechnical and Geological Engineering, 35 (5). pp. 2381-2399. ISSN 0960-3182

Tukimat, N. N. A. and Harun, S. and Shahid, S. (2017) Modeling irrigation water demand in a tropical paddy cultivated area in the context of climate change. Journal of Water Resources Planning and Management, 143 (7). ISSN 0733-9496

Usman, J. and Sam, A. M. (2017) Acid resistance of palm oil fuel ash and metakaolin ternary blend cement mortar. Sustainable Environment Research, 27 (4). pp. 181-187. ISSN 2468-2039

Vafaei, M. and Alih, S. C. (2017) Adequacy of first mode shape differences for damage identification of cantilever structures using neural networks. Neural Computing and Applications, 30 (8). pp. 2509-2518. ISSN 0941-0643

Vafaei, Mohammadreza and Moradi, Amirali and Alih, Sophia C. (2017) Seismic vulnerability of structures designed in accordance with the allowable stress design and load resistant factor design methods. International Journal of Structural and Construction Engineering, 11 (5). pp. 613-619.

Wan Ahmad, S. and Adnan, A. and Nazir, R. and Ramli, N. I. and Ali, M. I. and Ramli, M. Z. and Muthusamy, K. (2017) Determination of earthquake design ratio for fixed offshore platform due to Aceh earthquake in Malaysia. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

Wang, X. J. and Zhang, J. Y. and Shamsuddin, S. and Oyang, R. L. and Guan, T. S. and Xue, J. G. and Zhang, X. (2017) Impacts of climate variability and changes on domestic water use in the Yellow River Basin of China. Mitigation and Adaptation Strategies for Global Change, 22 (4). pp. 595-608. ISSN 1381-2386

Wong, J. Y. and Marsono, A. K. and Yip, C. C. (2017) Experimental and numerical validation of flexural behaviour of multi-scale prefabricated Industrialised Building System (IBS) sub-frame. Jurnal Teknologi, 79 (5). pp. 105-116. ISSN 0127-9696

Wong, Kevin Chester How Yee and Abdul Hamid, Abdul Rahim (2017) Strategies to enhance foreign workers skills at construction site. International Journal of Advanced Technology in Engineering and Science (IJATES), 5 (1). pp. 545-555. ISSN 2348-7550

Wong, Kevin Chester How Yee and Abdul Hamid, Abdul Rahim and Zahari, Haziq Zul Asyraf (2017) Foreign workers’ composition at construction site. Journal of Advanced Research Design, 30 (1). pp. 12-21. ISSN 2289-7984

Yaacob, H. and Jaya, R. P. and Madzaili, A. H. and Hassan, N. A. and Abdullah, M. E. and Jayanti, D. S. (2017) Stiffness modulus and creep properties of the coconut shell in an asphalt mixture. Journal of Fundamental and Applied Sciences, 9 (6S). pp. 50-58. ISSN 1112-9867

Yaacob, H. and Jaya, R. P. and Madzaili, A. H. and Hassan, N. A. and Hainin, M. R. and Nazri, F. M. (2017) Stability properties of asphalt mixture incorporating coconut shell. Journal of Fundamental and Applied Sciences, 9 (6S). pp. 16-24. ISSN 1112-9867

Yacob, Halim and Yong, Ee Ling and Kim, Hee-Young and Oh, Jeong-Eun and Noor, Zainura Zainon and Mohd. Din, Mohd. Fadhil and Mat Taib, Shazwin and Lee, Ting Hun (2017) Identification of pharmaceutical residues in treated sewage effluent in Johor, Malaysia. Malaysian Journal of Civil Engineering, 29 (2). pp. 265-173. ISSN 1823-7843

Yakubu, M. L. and Yusop, Z. (2017) Adaptability of rainfall simulators as a research tool on urban sealed surfaces-a review. Hydrological Sciences Journal, 62 (6). pp. 996-1012. ISSN 0262-6667

Yakubu, M. L. and Yusop, Z. (2017) Adaptability of rainfall simulators as a research tool on urban sealed surfaces–a review. Hydrological Sciences Journal, 62 (6). pp. 996-1012. ISSN 0262-6667

Yasmin, N. S. A. and Gaya, M. S. and Wahab, N. A. and Sam, Y. M. (2017) Estimation of pH and MLSS using neural network. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 912-918. ISSN 1693-6930

Yusof, A. and Rahman, A. B. (2017) Flexural strengthening of timber beams using carbon fibre reinforced polymer. International Journal of Applied Engineering Research, 12 (3). pp. 348-358. ISSN 0973-4562

Zainal Abidin, A. R. and Izzuddin, B. A. and Lancaster, F. (2017) A meshfree unit-cell method for effective planar analysis of cellular beams. Computers and Structures, 182 . pp. 368-391. ISSN 0045-7949

Zaini-Rijal, Z. and Rahman, A. B. A. (2017) A comparative bond study of deformed steel bar in different concrete grades and concrete fiber. Journal of Engineering and Applied Sciences, 12 (12). pp. 3072-3076. ISSN 1816-949X

Zakari, Ibrahim and Awal, A. S. M. Abdul and Zakaria, Rozana and Abdullah, Abdul Halid and Hossain, M. Zakaria (2017) Application of industrialized building system: a case study in Kano State, Nigeria. International Journal of Geomate, 13 (39). pp. 80-86. ISSN 2186-2982

Zardasti, L. and Yahaya, N. and Valipour, A. and Rashid, A. S. A. and Noor, N. M. (2017) Review on the identification of reputation loss indicators in an onshore pipeline explosion event. Journal of Loss Prevention in the Process Industries, 48 . pp. 71-86. ISSN 0950-4230

Conference or Workshop Item

Al-ashwal, Mohammed Taher and Abdullah, Redzuan and Zakaria, Rozana (2017) Traditional formwork system sustainability performance: Experts' opinion. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Alatas, Idrus M. and Nazir, Ramli and Masyhur, Irsyam and Simatupang, Pintor T. (2017) The effect of weathering process to determination of residual shear strength of clay shale with triaxial multi-stage system. In: 19th International Conference on Soil Mechanics and Geotechnical Engineering, ICSMGE 2017, 17 - 22 September 2017, Seoul, South Korea.

Aminuddin, K. M. and Saggaff, Anis and Md. Tahir, Mahmood (2017) Experimental behaviour of beam-column connection using cold-formed steel sections with rectangular gusset-plate. In: Smart Construction Towards Global Challenges, ICONBUILD 2017, 4 - 17 August 2017, Palembang, Indonesia.

Anuar, M. A. M. and Anting, N. and Shahidan, S. and Lee, Y. Y. and Md. Din, M. F. and W. Nazri, W. M. H. (2017) Preliminary evaluation of physical and chemical characterization of waste palm oil shell as cool material replaced in asphaltic concrete as fine aggregate. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

C. M., Nurulain and P. J., Ramadhansyah and Y., Haryati and A. H., Norhidayah and M. E., Abdullah and M. H., Wan Ibrahim (2017) Performance of macro clay on the porous asphalt mixture properties. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Chai, C. E. and Sarbini, N. N. and Ibrahim, I. S. and Ma, C. K. and Tajol Anuar, M. Z. (2017) Modelling the behaviour of steel fibre reinforced precast beam-to-column connection. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Herayan, H. N. S. and Azlan, A.. and Abdollah Vaez, S. (2017) Deaggregation of probabilistic ground motions in the Kota Kinabalu and Lahad Datu towns of Sabah, Malaysia. In: 6th International Conference of Euro Asia Civil Engineering Forum, EACEF 2017, 22 August - 25 August 2017, Seoul, South Korea.

Ismail, Mohammad and Egba, Ernest Ituma (2017) Effects of climate and corrosion on concrete behaviour. In: 3rd International Conference on Construction and Building Engineering: Smart Construction Towards Global Challenges, ICONBUILD 2017, 14 - 17 August 2017, Palembang, Indonesia.

Jhatial, Ashfaque Ahmed and Goh, Wan Inn and Mohamad, Noridah and Alengaram, U. Johnson and Kim, Hung Mo and Abdullah, Redzuan (2017) Influence of polypropylene fibres on the tensile strength and thermal properties of various densities of foamed concrete. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Khadavi, Khadavi and Tahir, M. M. (2017) Prediction on flexural strength of encased composite beam with cold-formed steel section. In: 3rd International Conference on Construction and Building Engineering: Smart Construction Towards Global Challenges, ICONBUILD 2017, 14 - 17 August 2017, Palembang, Indonesia.

Lee, Y. Y. and Halim, M. S. and Aminudin, E. and Guntor, N. A. (2017) Thermal repellent properties of surface coating using silica. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Lee, Y. Y. and Lee, Y. H. and Mohammad, S. and Shek, P. N. and Ma, C. K. (2017) Thermal characteristics of a residential house in a new township in Johor Bahru. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Lim, P. Y. and Yahya, K. and Aminudin, E. and Zakaria, R. and Haron, Z. and Mohamad Zin, R. and Redzuan, A. A. H. (2017) Carbon footprint of construction using industrialised building system. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Mering, M. M. and Aminudin, E. and Chai, C. S. and Zakaria, R. and Tan, C. S. and Lee, Y. Y. and Redzuan, A. A. (2017) Adoption of building information modelling in project planning risk management. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Mohammed Salah, Faisal and Putra Jaya, Ramadhansyah and Mohamed, Azman and Abdul Hassan, Norhidayah and Mad Rosni, Nurul Najihah and Mohamed, Abdullahi Ali and Agussabti, Agussabti (2017) Performance of asphaltic concrete incorporating styrene butadiene rubber subjected to varying aging condition. In: 3rd Advanced Materials Conference 2016, AMC 2016, 28 - 29 November 2016, Langkawi Island, Kedah.

Mohd. Apandi, Nazirah and Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2017) Compressive strength models of repaired concrete structures. In: 3rd International Conference on Construction and Building Engineering: Smart Construction Towards Global Challenges, ICONBUILD 2017, 14 - 17 August 2017, Palembang, Indonesia.

Muhammad Firdaus, Muhammad Firdaus and Saggaff, Anis and Md. Tahir, Mahmood (2017) Finite element analysis of composite beam-to-column connection with cold-formed steel section. In: 3rd International Conference on Construction and Building Engineering: Smart Construction Towards Global Challenges, ICONBUILD 2017, 14 - 17 August 2017, Palembang, Indonesia.

Osman, M. H. and Sarbini, N. N. and Ibrahim, I. S. and Ma, C. K. and Ismail, M. and Mohd., M. F. (2017) A case study on the structural assessment of fire damaged building. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor. (In Press)

Othman, Azlan and Ismail, Syuhaida and Yahya, Khairulzan (2017) An overview of knowledge management (KM) issues for implementation in consultant firms in Malaysian construction industry. In: 10th International Seminar on Industrial Engineering and Management (ISIEM), 7 - 9 Nov 2017, Esa Unggul Univ, Tanjung Pandan, Indonesia.

Padil, Khairul H. and Bakhary, Norhisham (2017) Comparison of statistical and non-statistical artificial neural network methods for damage detection using modal data. In: 24th Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2016, 6 - 9 December 2016, Perth, Australia.

Ramlan, Nazirah and Ahmad, Siti Nurhalimatul Husna and Aminuddin, Eeydzah and Abdul Hamid, Hazrul and Yaman, Siti Khalijah and Abdullah, Abd. Halid (2017) Assessment of indoor air quality in comparison using air conditioning and fan system in printing premise. In: 1st Sriwijaya International Conference on Engineering, Science and Technology, SICEST 2016, 9 - 10 November 2016, Bangka Island, Indonesia.

Redzuan, Amir A. and Aminudin, Eeydzah and Zakaria, Rozana and Mohamed Ghazali, Farid Ezanee and Baharudin, Nur Azwa Amyra and Lee, Yong Siang (2017) Succeeding criteria of community based on land transportation infrastructure for Johor innovation valley development. In: International Conference of Global Network for Innovative Technology and AWAM International Conference in Civil Engineering: Sustainable Technology and Practice for Infrastructure and Community Resilience, IGNITE-AICCE 2017, 8 - 9 August 2017, Pulau Pinang, Malaysia.

Shafiq, I. and Azreen, M. and Hussin, M. W. (2017) Sulphuric acid resistant of self compacted geopolymer concrete containing slag and ceramic waste. In: 2016 Engineering Technology International Conference, ETIC 2016, 5 - 6 August 2016, Ho Chi Minh City, Vietnam.

Shokravi, H. and Bakhary, N. H. (2017) Comparative analysis of different weight matrices in subspace system identification for structural health monitoring. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 August - 29 August 2017, Johor Bahru, Johor.

Shokravi, H. and Bakhary, N. H. (2017) Comparative analysis of different weight matrices in subspace system identification for structural health monitoring. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Wan Ibrahim, M. H. and Mangi, S. A. and Burhanudin, M. K. and Ridzuan, M. B. and Jamaluddin, N. and Shahidan, S. and Wong, Y. H. and Faisal, S. K. and Fadzil, M. A. and Ramadhansyah, P. J. (2017) Compressive and flexural strength of concrete containing palm oil biomass clinker and polypropylene fibres. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017J, 28 - 29 August 2017, Johor Bahru, Johor.

Wan Jusoh, Wan Amizah and Ibrahim, Izni Syahrizal and Mohd. Sam, Abdul Rahman (2017) Flexural behaviour of reinforced concrete beams with discrete steel - Polypropylene fibres. In: 1st Sriwijaya International Conference on Engineering, Science and Technology, SICEST 2016, 9 - 10 November 2016, Bangka Island, Indonesia.

Wan Nazri, W. M. H. and Anting, N. and Lim, A. J. M. S. and Prasetijo, J. and Shahidan, S. and Md. Din, M. F. and Mohd. Anuar, M. A. (2017) Alternative design of pipe sleeve for liquid removal mechanism in mortar slab layer. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor.

Zakaria, Siti Fairus and Mohamad Zin, Rosli and Mohamad, Ismail and Balubaid, Saeed (2017) The development of flood map in Malaysia. In: 3rd International Conference on Construction and Building Engineering: Smart Construction Towards Global Challenges, ICONBUILD 2017, 14 - 17 August 2017, Palembang, Indonesia.

Zukri, Azhani and Nazir, Ramli and Mender, Fatin Nabilah (2017) An experimental study on stabilization of Pekan clay using polyethylene and polypropylene. In: Sustainable Technology and Practice for Infrastructure and Community Resilience, IGNITE-AICCE 2017, 8 - 9 August 2017, Pulau Pinang, Malaysia.

Thesis

Mazlan, Ain Naadia (2017) Noise induced-hearing loss compensation model for construction industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Ming Han (2017) Continuous noise mapping predication techniques using the stochastic modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asmel, Nabel Kalel (2017) Super adsorbent - based remediation and on-site flow injection analysis determeniation of arsenic ions in gold mining site. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Yean Chin (2017) Performance of floating piled raft with varying lengths in soft compressible subsoil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Kadir, Siti Athirah (2017) Pengukuran prestasi bagi perkhidmatan penyelenggaraan bangunan di kampus UTM, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulkapli, Nor Syahidah (2017) Optimization of titanium recovery from drinking water treatment plant residue as potential photocatalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Halim, Hazruwani (2017) Isu dan cabaran yang dihadapi oleh pengeluar komponen Sistem Binaan Berindustri (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ab. Hamid, Abdul Hakam (2017) Flooding on hill site of Bukit Jambul development area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rashid, Rozalina (2017) Characterization of soil mixed with reclaimed asphalt pavement waste for road shoulder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abas, Jalaluddin (2017) Road safety audit at expressway: upgrading Pasir Gudang expressway (F17) Johor Baharu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Wahab, Mohd. Asnawi (2017) Garnet waste as sand replacement for sub base layer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Noorul Hudai (2017) Carbon, nitrogen and phosphorus removal from domestic wastewater by alternating aerobic-anoxic process. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, Siti Norhidayah (2017) Wet market wastewater regulatory framework in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahammed, Sumaiya Jarin (2017) Agricultural water stress and risk assessment using integration of catastrophe theory and entropy methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Noraziah (2017) Influence of composted food waste and sewage sludge on plant growth enhanced with magnetic fields. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Abdul Wahab, Nurul Shakila (2017) Tertiary treatment of palm oil mill effluent using sequential batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Bajuri, Fatin Afiqah (2017) The adoption of building information modelling in industrialised building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahwang, Amisah (2017) Dynamic behaviour of long span cantilever steel-concrete composite floor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alamgir, Md. Mahiuddin (2017) Climate change projection and drought characterization in Bangladesh. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Shettima Umara (2017) Development of sustainable concrete using iron ore tailings as sand replacement. PhD thesis, Universiti Teknologi Malaysia.

Andalibizadeh, Behrouz (2017) Value engineering for drainage and stream way in roads and highways construction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anuar, Fatin Izzaidah (2017) Effect of base columns arrangement to lateral displacement and shear lag of modified diagrid structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Anuar, Nur Amalina (2017) Seismic fragility of low ductile partially infilled reinforced concrete frame in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Arman, Nor Zaiha (2017) The potential use of local index of biological integrity for tropical river assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayub, Muhammad Razi (2017) Application of magnetic field for sewage purification using constructed wetland planted with water hyacinth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz, Mohd. Zawawiv (2017) Partial replacement of normal sand with garnet waste for bedding sand layer of concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Azizan, Nor Asni (2017) Tetrachloroethylene migration and remediation by surfactant-alcohol in two-dimensional saturated layered sand laboratory experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Babatunde, Ogunbode Ezekiel (2017) Creep and shrinkage performance of kenaf bio fibrous concrete composite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Babatunde, Ogunbode Ezekiel (2017) Creep and shrinkage performance of kenaf bio fibrous concrete composites. PhD thesis, Universiti Teknologi Malaysia.

Bavafa, Ali Asghar (2017) Developing a generic safety performance evaluation prototype for construction projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chin, Li Wei (2017) The cost benefits of building information modeling (BIM) in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chou, Ka Chun (2017) Non-linear analysis of botlted flush endplate steel beam-to-column connections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Chow, Han Seng (2017) The effect of location of post drilled web opening on the strength of reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Darwish, Mohamad S. J. (2017) Struvite precipitation for the recovery of ammonium nitrogen from landfill leachate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghoreishiamiri, Seyedmojtaba (2017) Effect of areca catechu extracts as green corrosion inhibitor on concrete properties. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gimbiya, Turu Christiana (2017) The effectiveness of welded inclined bars as shear reinforcement in rectangular beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Gonolon, Jibeh (2017) Hydro-response of grid-like floating structure subjected to a mono-directional flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron @ Hassan, Azizah (2017) Performance of lightweight concrete using palm oil clinker as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harun, Hanisah (2017) Back analyses on prefabricated vertical drain treated ground using plaxis 2D. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hashim, Haslina (2017) Air pollutants from bauxite mining activity at Bukit Goh, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hashim, Rosli (2017) Analysis on junction performance from 5 development at Jalan Ipoh Lumut (FT100), Manjung, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hong, Puan Yee (2017) Bearing capacity, comparison of results from Plaxis 2D and empirical model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Huseien, Ghasan Fahim (2017) Durability performance of ternary blend alkali activated mortars for concrete surface damage repair. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Hairu Nabilah (2017) Locational and socio-economic factors in determining willingness-to-accept for coastal development in Sungai Papan, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Israr, Muhammad Umair (2017) An approach to reuse polyehtylene terephthalate bottles as plastic coated aggregate in roads and their engineering properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kader Mahmud, Mohammad Golam (2017) Engineering properties of bituminous mixture using kaolin as a modifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karim, Norika (2017) Pollution monitoring at Sungai Semantan tributaries using georaphical information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khamar, Farah Diyana Noor (2017) Effective facilities management estimation for business continuity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Koo, Ting Choong (2017) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel of lipped channel sections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kuan, Siew Fung (2017) Compressive strength behavior of treated marine clay using ordinary portland cement and blast furnace slag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kyaw, Naing Win (2017) Shear wall of multi story wall beam system for tall buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Lam, Tian Fook (2017) Effect of kenaf fiber on the mechanical properties of reinforced concrete structures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Law, Chin Yong (2017) Performance and applications of lightweight foamed concrete with various density. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Lee, Cheng Yee (2017) Influence of cementation reagent concentration on microbial-induced calcite precipitation in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Liew, Wai Loan (2017) Enhancing biomass-coated carrier materials in aerobic upflow bioreactor system for polishing palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kar Sing (2017) Behaviour of repaired composite steel pipeline using epoxy grout as infill material. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Low, Jun Xiu (2017) Experimental investigation on lightweight composite slab system with hollow box beam for flood resistant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mahdiyar, Amir (2017) A decision support system for the selection of green roof for residential buildings. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansour, Farnoud Rahimi (2017) A new viscoelastic damper for seismic protection of steel building frame. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Amin, Khairul Nizam (2017) The effect of bauxite mining on water quality of Sungai Mabuk at Bukit Goh, Kuantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Meynagh, Mahdi Moharrami (2017) Collaborative procurement strategy in private sector housing projects using Industrialised Building Systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mior Sani, Wan Noor Hin (2017) Characterization of soil mixed with garnet waste for road shoulder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Khairul Anuar (2017) Settlement analysis of prefabricated vertical drain by finite element analysis for treated road embankment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Daud, Md. Syafiq (2017) Morphological changes at Desaru Beach, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamad Zukri, Siti Nurul Nureda (2017) Performance of waste crumb rubber steel fiber concrete under dynamic loadings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Najib, Mohamed Zuhaili (2017) Biogranules containing photosynthetic bacteria for carbon dioxide reduction in palm oil mill effluent treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadhosseini, Hossein (2017) Strength, durability and microstructural analysis of concrete incorporating waste carpet fibre and palm oil fuel ash. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamoud, Mohamed Ali (2017) Effect of mortar spacers of different grades on the performance of concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Ali @ Kam Wong, Nurhafizah (2017) Horizontal collector well as alternative for conventional raw water intake. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Mustakim, Nur Akmal Hayati (2017) Effect of base columns spacing to lateral resistant and shear lag of modified diagrid structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shukry, Nurul Athma (2017) Effect of mineral fillers on mastic and mixture for porous asphalt. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad, Akilu (2017) Creep and thermal response of long span prestressed concrete integral abutment bridge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad, Nasiru Zakari (2017) Integral mixing using nano silicon for concrete waterproofing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musa, Mohad 'Fedder (2017) Accident predictive model based on environmental factors at Federal Route, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Namathevan, Sreeramalu (2017) Consistency of atterberg limit properties for crushed limestone aggregate base course between stockpile and in place material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawaz, Nadeem (2017) Dynamic neuro-fuzzy systems for rainfall-runoff modeling. PhD thesis, Universiti Teknologi Malaysia.

Nawaz, Nadeem (2017) Dynamic neuro-fuzzy systems for rainfall-runoff modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngu, Terence Tai Loong (2017) Correlation between unconfined compressive strength and standard penetation test on ground improvement using enhanced jet grouting in alluvium soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Noordin, Noor Rashidah (2017) Riparian management and its effect on aquatic macroinvertebrate communities at oil palm waterways in Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ong, Choon Kian (2017) Soil suction model for grass evaportranspiration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Choon Kian (2017) Soil suction model for grass evapotranspiration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Norzarina (2017) Low back pain mitigation method in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pakir, Faizal (2017) Physicochemical, microstructural and engineering behaviour of non-traditional stabiliser treated marine clay. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Patowary, Mohammed Ziauddin (2017) Seismic analysis for multi-story building horizontally damped above basement level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rafieizonooz, Mahdi (2017) Durability and leachability of concrete containing coal bottom ash and fly ash. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, Mohammad Mosiour (2017) Relationships between moisture content and dielectric constant for subgrade and subbase of pavement courses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raja Nhari, Raja Nurulhaiza (2017) Road Safety Assessment Tool (RSAT) in determining level of safety for road design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Nurul As’shikin (2017) Effects of effective microorganisms on properties of blended cement concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razavi, Masoud (2017) Performance of kenaf fibre reinforced concrete under static and dynamic loadings. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rosli@Shuib, Suhaizam (2017) Building information modelling in asset management for asset tracking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rosman, Noor Hasyimah (2017) Biogranular sludge for rubber processing wastewater in a sequencing batch reactor. PhD thesis, Universiti Teknologi Malaysia.

Selamat, Nurul Ainaa (2017) Investigation on road damage due to vehicle overloading in Ipoh state road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shah, Gautam Lalit (2017) Determinants of mobile phone waste recycling and end-of-life management in Johor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Shah, Gautam Lalit (2017) Determinants of mobile phone waste recycling and end-of-life management of Johor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sohaei, Houman (2017) Controlling tunnel induced ground surface and pile movements using micropiles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suleiman, Jibrin Hassan (2017) Structural equation modeling of energy consumption in residental building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taj, Jamal Fawzi (2017) Partnering approach to support collaborative working environment in Mecca construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tom, Ibrahim Magira (2017) Effect of garnet waste on the properties of foamed concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Tuan Lah, Tengku Firdaus (2017) Performance of solid material diverter subject to impact collision with respect to angle variation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Vahed, Yousef Karimi (2017) Seismic retrofit of low-ductile columns through concrete jacketing with inoxydable reinforcement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yan, Kim Leong (2017) Conceptual framework of key performance indicator for industralised building system project in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal, Rozallienny (2017) Development of flood risk map at Kuantan using geographical information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Farizan (2017) Strength development of fly ash concrete incorporating graphene nanoplatelets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Zeb, Bilal (2017) The effect of high temperature on concrete containing fibers from recycled plastic bottles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.