Items where Year is 2013

Article

A. Mohammed, Hussein and Khan, Waqar Ahmed and Sivasankaran, S. and Mohammed, H. A. and Adegun, I. K. (2013) Numerical simulation of three-dimensional supersonic flow around an aerodynamic bump. Journal of Basic and Applied Scientific Research, 3 (7). pp. 656-666. ISSN 2090-4304

Abdul Wahid, Mazlan and Dairobi, A. G. and Saatc, Aminuddin and Sies, Mohsin M. and Mohammed, H. A. and Darus, Amer N. and Mohd. Faizal, H. and Ibthisham, A. M. and Fairus, M. Y. (2013) Pulse detonation engine research development at high speed reacting flow laboratory-hiref, Universiti Teknologi Malaysia. Applied Mechanics and Materials, 388 (n/a). pp. 285-291. ISSN 1662-7482

Abed Mahdi, Raed and A. Mohammed, Hussein and Munisamy, K. M. (2013) Improvement of convection heat transfer by using porous media and nanofluid: review. International Journal of Science and Research, 2 (8). pp. 34-47. ISSN 2319-7064

Abuelnuor, Abuelnuor Abdeen Ali and Abdul Wahid, Mazlan and Saat, Aminuddin and Mohd. Sies, Mohsin and Elbasheer, M.K. and Hosseini, Seyed Ehsan and G., A. Dairobi and Mohammed, Hussein A. and Darus, Amer Nordin (2013) Review of numerical studies on nox emission in the flameless combustion. Applied Mechanics and Materials, 388 (n/a). pp. 235-240. ISSN 1662-7482

Ahmad, Zaini and Campbell, J. (2013) Development of two-dimensional solver code for hybrid model of energy absorbing system. International Journal of Physical Sciences, 8 (13). pp. 510-525. ISSN 1992-1950

Ahmad, Zaini and J., Campbell (2013) Development of two dimensional solver code for hybrid model of energy absorbing system. International Journal of Physical Sciences, 8 (13). pp. 510-525. ISSN 1992-1950

Ahmad, Zair Asrar and Perez, Juan Miguel Vivar and Gabbert, Ulrich (2013) Semi-analytical finite element method for modeling of lamb wave propagation. CEAS Aeronautical Journal, 4 (n/a). pp. 21-33. ISSN 1869-5590

Al Mola, Mohammed and Abdullah, Mohd. Yunus and Mailah, Musa and Muhaimin, Abdul Halim and Mohd. Samin, Pakharuddin (2013) Fuzzybased PID with iterative learning active force controller for an antilock brake system. International Journal of Simulation, Systems, Science and Technology, IJSSST, 13 (3A). pp. 35-41. ISSN 1473-8031

Al-Mola, Mohammed and Mailah, Musa and Muhaimin, Abdul Halim and Abdullah, Mohd. Yunus and Mohd. Samin, Pakharuddin (2013) Fuzzy-based PID with iterative learning active force controller for an anti-lock brake system. International Journal of Simulation, Systems, Science and Technology, IJSSST, 13 (3A). pp. 35-41. ISSN 1473-8031

Al-Turaihi, Riyadh S. and Hussein, Ahmed Kadhim and Al-Kayiem, Hussain H. and A. Mohammed, Hussein (2013) Experimental investigation of various solid particle materials on the steady state gassolid fluidized bed system. Journal of Basic and Applied Scientific Research, 3 (7). pp. 293-304. ISSN 2090-4304

Al-Turaihi, Riyadh S. and Hussein, Ahmed Kadhim and Al-Kayiem, Hussain H. and Mohammed, H. A. (2013) Experimental investigation of various solid particle materials on the steady state gas-solid fluidized bed system. Journal of Basic and Applied Scientific Research, 3 (7). pp. 293-304. ISSN 2090-4304

Alexandrov, Sergei and Yusof, Mustafa and Yahya, Mohd. Yazid (2013) An efficient approach for identifying constitutive parameters of the modified Oyane ductile fracture criterion at high temperature. Mathematical Problems In Engineering . ISSN 1024-123X

Alkali, Adam Umar and Mohd. Yusof, Noordin and Mohamed Handawi Sa’ad Elmunafi, Mohamed Handawi and Fawad, Hasan (2013) Influence of cutting conditions on chip formation when turning assab DF-3 hardened tool steel. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 76-79. ISSN 1793-8198

Alkali, Adam Umar and Mohd. Yusof, Noordin and Sa’ad Elmunafi, Mohamed Handawi and Fawad, Hasan (2013) Influence of cutting conditions on chip formation when turning ASSAB DF3 hardened tool steel. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 76-79. ISSN 1793-8198

Bahri, B. and Abdul Aziz, Azhar and Shahbakhti, M. and Muhamad Said, Mohd. Farid (2013) Ethanol fuelled HCCI engine: a review. World Academy of Science, Engineering and Technology (WASET), 7 (7). pp. 670-675. ISSN 2010-376X

Bahri, Bahram and Abdul Aziz, Azhar and Shahbakhti, Mahdi and Muhamad Said, Mohd. Farid (2013) Analysis and modeling of exhaust gas temperature in an ethanol fuelled HCCI engine. Journal of Mechanical Science and Technology, 27 (11). pp. 3531-3539. ISSN 1738-494X

Bakhsheshi-Rad, Hamidreza Reza and Haerian, B. and Najafizadeh, Abbas and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Hamzah, Esah and Daroonparvar, Mohammadreza (2013) Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel. Canadian Metallurgical Quarterly, 52 (4). pp. 449-457. ISSN 0008-4433

Che Kob, Mohd. Salman and Supriyo, Bambang and Tawi, Kamarul Baharin and Hussein, Mohamed and Zainal Abidin, Yusrina (2013) PID control of an electro-mechanical friction clutch system. International Journal of System Applications, Engineering & Development, 7 (3). pp. 122-129. ISSN 2074-1308

Che Sidik, Nor Azwadi and Zeinali, Mohammadjavad and Safdari, Arman and Kazemi, Alieh (2013) Adaptive-network-based fuzzy inference system analysis to predict the temperature and flow fields in a lid-driven cavity. Numerical Heat Transfer Part A-Applications, 63 (12). pp. 906-920. ISSN 1040-7782

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Hussain, Mohammad Sakhawat (2013) Improved thermally grown oxide scale in air plasma sprayed NiCrAlY/nano-YSZ coatings. Journal of Nanomaterials . ISSN 1687-4110

Eyu, D. G. and Hamzah, Esah and Chukwuekezie, Christian Sunday and Idris, Jamaliah and Mohammad, Ismail (2013) Effect of green inhibitor on the corrosion behaviour of reinforced carbon steel in concrete. ARPN Journal of Engineering and Applied Sciences, 8 (5). pp. 326-332. ISSN 1819-6608

Farahany, Saeed and Ourdjini, Ali and Idris, Mohd. Hasbullah and Takaloo, Ashkan Vakilipour and Thai, L. T. (2013) Combined effect of bismuth content and cooling rate on microstructure and mechanical properties of al-8.5Si-0.4Mg-0.3Fe alloy. Canadian Metallurgical Quarterly, 52 (2). pp. 208-216. ISSN 0008-4433

Faraji, Soheila and Faraji, Amir Hossein and Noori, Seyed Reza and Ani, Farid Nasir (2013) Investigation on electroless Cu-P-micro/nanoSiC composite coatings. Surface Engineering, 31 (3). pp. 179-188. ISSN 0267-0844

Foo, Jin Hoe and Aizawa, Tatsuhiko and Yukawa, Satoru (2013) Synthesis and characterization of doped and undoped nano-columnar DLC coating. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 17-24. ISSN E-ISSN 2180-3722

Hamzah, Esah and Khohr, C. L. and Abdolahi, Ahmad and Ibrahim, Z. (2013) Influence of iron bacteria on the corrosion behavior of carbon steel: SEM study. Jurnal Teknologi (Sciences and Engineering), 65 (1). pp. 9-14. ISSN 0127-9696

Harandi, Shervin Eslami and Mirshahi, Mohammad and Koleini, Shahriar and Idris, Mohd. Hasbullah and Jafari, Hassan and Abdul Kadir, Mohammed Rafiq (2013) Effect of calcium content on the microstructure, hardness and in-vitro corrosion behavior of biodegradable Mg-Ca binary alloy. Materials Research-Ibero-American Journal of Materials, 16 (1). pp. 11-18. ISSN 1516-1439

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2013) Biogas utilization: experimental investigation on biogas flameless combustion in lab-scale furnace. Energy Conversion and Management, 74 . pp. 426-432. ISSN 0196-8904

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2013) Biogas utilization: experimental investigation on biogas flameless combustion in labscale furnace. Energy Conversion and Management, 74 . pp. 426-432. ISSN 0196-8904

Ishak, Iskandar Shah and Alias, Rose Alinda and Adam, U. and Suradi, Z. (2013) ICT strategic planning in malaysia public research institute. International Journal of e-Education, e-Business, e-Management and e-Learning, 3 (5). pp. 391-396. ISSN 2010-3654

Isvandzibaei, Mohammad Reza and Jamaluddin, Hishamuddin and Raja Hamzah, Raja Ishak (2013) Effects of ring support and internal pressure on the vibration behavior of multiple layered cylindrical shells. Advances In Mechanical Engineering, 2013 . ISSN 1687-8132

Izhan, M. I. and Abdul Kadir, Mohammed Rafiq and Samion, Syahrullail (2013) Friction resistance of refined, bleached and deodorized (RBD) palm olein using modified pin-on-disk tribotester. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 27-33. ISSN 0127-9696

K., David W. Yang and A. Bakr, Yousif and Mohd. Ghazali, Normah (2013) Experimental investigations on the effects of coiling and bends on the sound energy losses through a resonator tube. Procedia Engineering, 56 . pp. 842-848. ISSN 1877-7058

Kermani, Emad and Jahanshaloo, Leila and Che Sidik, Nor Azwadi (2013) Analysis of mixed convection of alumina-water nanofluid flow over heated cavity using lattice Boltzmann method. International Review On Modelling and Simulations, 6 (4). pp. 1350-1354. ISSN 1974-9821

Keshavarz, Meysam and Ahmad, Norhayati (2013) Characterization and modification of mesoporous silica nanoparticles prepared by sol-gel. Journal of Nanoparticles, 2013 . pp. 1-4. ISSN 2180-3722

Keshavarz, Meysam and Idris, Mohd. Hasbullah and Ahmad, Norhayati (2013) Mechanical properties of stabilized zirconia nanocrystalline eb-pvd coating evaluated by micro and nano indentation. Journal of Advanced Ceramic, 2 (4). 333–340. ISSN 2226-4108

M. Yusop, Z. and Md. Zain, M. Z. and Hussein, Mohamed and As’arry, A. and Musa, A. R. and Yaacob, Mohd. Shafiek and Ammoo, Mohd. Shariff (2013) Implementation of evolutionary optimization techniques in tuning PID parameters for tremor patient active assistive writing device. International Journal Of Systems Applications, Engineering & Development, 7 (4). pp. 183-190. ISSN 2074-1308

Mahdi, Raed Abed and A. Mohammed, Hussein and Munisamy, K. M. (2013) The effect of various open cell aluminium foam geometrical shapes on combined convection heat transfer with nanofluid. International Journal of Emerging Technology and Advanced Engineering, 3 (9). pp. 615-629. ISSN 2250-2459

Mat Yajid, Muhamad Azizi and Daroonparvar, Mohammadreza and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Hussain, Mohammad Sakhawat and Hamzah, Esah (2013) Evaluation of normal and nanolayer composite thermal barrier coatings in fused vanadate-sulfate salts at 1000 degrees °C. Advances In Materials Science and Engineering . ISSN 1687-8434

Md. Fahmi, Abd. Samad and Jamaluddin, Hishamuddin and Ahmad, Robiah and Yaacob, Mohd. Shafik and Azad, Abul K. M. (2013) Effect of penalty function parameter in objective function of system identification. International Journal of Automotive and Mechanical Engineering, 7 (1). pp. 940-954. ISSN 2229-8649

Mohamed Kamar, Haslinda and Ahmad, Robiah and Kamsah, Nazri and Mohamad Mustafa, Ahmad Faiz (2013) Artificial neural networks for automotive air-conditioning systems performance prediction. Applied Thermal Engineering, 50 (1). pp. 63-70. ISSN 1359-4311

Mohamed Kamar, Haslinda and Kamsah, Nazri and Senawi, Mohd. Yusoff (2013) Computerized simulation of automotive air conditioning system: a parametric study. International Journal of Computer Science Issues, 1 (1). pp. 787-794. ISSN 1694-0784

Mohamed Kamar, Haslinda and Kamsah, Nazri and Senawi, Mohd. Yusoff (2013) Computerized simulation of automotive air-conditioning system: a parametric study. International Journal of Computer Science Issues, 1 (1). pp. 787-794. ISSN 1694-0784

Mohammed Adham, Ahmed and Mohd. Ghazali, Normah and Ahmad, Robiah (2013) Cooling of microchannel heat sinks with gaseous coolants. Procedia Engineering, 56 (n/a). pp. 338-343. ISSN 1877-7058

Mohd. Perang, Mohd. Rozi and Nasution, Henry and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Dahlan, Afiq Aiman (2013) Experimental study on the replacement of HFC-R134A by hydrocarbons mixture in automotive air conditioner. International Journal of Technology, 4 (1). pp. 81-92. ISSN 2086-9614

Mohd. Zulkifli, Mohamad Shaiful and Priyanto, Agoes (2013) Analysis of motion on FPSO in shallow water with a non-collinear environment. Journal Ocean, Mechanical and Aerospace - Science and Engineering - (JOMAse), 1 . pp. 18-28. ISSN 2354-7065

Mokhtari, Mohammad Hossein and Adnan, Robiah and Busu, Ibrahim (2013) A new approach for developing comprehensive agricultural drought index using satellite-derived biophysical parameters and factor analysis method. Natural Hazards, 65 (3). pp. 1249-1274. ISSN 0921-030X(Print); 1573-0840(Electronics)

Muhammadu, Muhamadu Masin and Md. Sheriff, Jamaluddin and Hamzah, Esah (2013) Effect of flow pattern at pipe bends on corrosion behaviour of low carbon steek and its challenges. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 55-65. ISSN E–ISSN 2180–3722

Oluwole, Arowolo Matthew and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri (2013) Integrating road safety indicators into performance road safety index. ARPN Journal of Engineering and Applied Sciences, 8 (9). pp. 693-698. ISSN 1819-6608

Osman , Kahar (2013) Orthogonal curvilinear grid and spectral expansions for the solution of navier-stokes equation. Indo-American Journal of Mechanical Engineering, 1 (1). n/a. ISSN 2321-9416

Perez, Juan Miguel Vivar and Ahmad, Zair Asrar and Gabbert, Ulrich (2013) Membrane carrier wave function in the modeling of lamb wave propagation. CEAS Aeronautical Journal, 4 . ISSN 1869-5582

Prawoto, Yunan and Yusof, Mustafa A. (2013) Automotive power window mechanism failure initiated by overload. Engineering Failure Analysis, 31 . pp. 179-188. ISSN 1350-6307

Prayetno, E. and Koto, Jaswar (2013) Feasibility study of Win-In-Ground (WIG) for rescue operation. Journal of Ocean, Mechanical and Aerospace -Science and Engineering-, 1 . pp. 12-17. ISSN 2354-7065

Prayetno, E. and Koto, Jaswar and Abd. Kader, Ab. Saman (2013) Feasibility study of win-in-ground (WIG) for rescue operation in Kepulauan Riau. Journal of Ocean, Mechanical and Aerospace -Science and Engineering-, 1 . pp. 12-17. ISSN 2354-7065

Ridhwan, J. and Hamzah, Esah and Effendy, H. and Selamat, M. Z. and Zulfattah, Z. (2013) Effect of cooling rate on the microstructures and hardness of fe-ni-cr superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180-1053

Ridhwan, J. and Hamzah, Esah and Effendy, H. and Selamat, M. Z. and Zulfattah, Z. (2013) Effect of cooling rate on the microstructures and hardness of FeNiCr superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180-1053

Salman, B. H. and A Mohammed, Hussein and Munisamy, K. M. and Sh Kherbeet, A. (2013) Characteristics of heat transfer and fluid flow in microtube and microchannel using conventional fluids and nanofluids: a review. Renewable and Sustainable Energy Reviews, 28 . pp. 848-880. ISSN 1364-0321

Sapawe, N. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Shah, M. I. A. and Jusoh, R. and Salleh, N. F. M. and Hameed, B. H. and Karim, A. H. (2013) Cost–effective microwave rapid synthesis of zeolite NaA for removal of methylene blue. Chemical Engineering Journal, 229 . pp. 388-398. ISSN 1385-8947

Siew, Teng Ng and Chuii, Khim Chong and Yee, Wen Choon and Lian, En Chai and Deris, Safaai and Md. Illias, Rosli and Omar, Mohd. Shahir Shamsir and Mohamad, Mohd. Saberi (2013) Estimating kinetic parameters for essential amino acid production in arabidopsis thaliana by using particle swarm optimization. Jurnal Teknologi, 64 (1). pp. 73-80. ISSN 21803722

Tang, Chernfon and Mohd. Rohani, Jafri and Mat Yajid, Muhammad Azizi (2013) Characterization of green corrosion inhibitor using Taguchi dynamic approach. International Journal of Electrochemical Science, 8 (6). pp. 7991-8004. ISSN 1452-3981

Vakilipour Takaloo, Ashkan and Hussain, Mohammad Sakhawat and Atabaki, Mehdi Mazar and Vakilipour Takaloo, Shayan and Seung, Ki Joo (2013) Nanocrystalline nickel deposition on the titanium alloys using high solution flow velocity. Journal of Materials Engineering and Performance, 22 (3). pp. 706-712. ISSN 1059-9495 (Print); 1544-1024 (Electronic)

Yaakob, Omar and Abdul Ghani, Mohamad Pauzi and Adnan, Faizul Amri (2013) A review of muslim maritime tradition. Perintis E-Journal, 3 (2). pp. 1-15. ISSN 2232-0725

Zahraee, Seyed Mojib and Hatami, Milad and Mohd. Yusof, Noordin and Mohd. Rohani, Jafri and Ziaei, Farhad (2013) Combined use of design of experiment and computer simulation for resources level determination in concrete pouring process. Jurnal Teknologi (Sciences and Engineering), 64 (1). pp. 43-49. ISSN 0127-9696

Book Section

Ab Kader, A. S. and Olanrewaju, O. S. (2013) River transportation master plan study for environmental enhancement. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 178-184. ISBN 978-146664318-5

Afrinaldi, F. and Mat Saman, M. Z. and Shaharoun, A. M. (2013) A new methodology for integration of end-of-life option determination and disassemblability analysis. In: Treatise on Sustainability Science and Engineering. Springer Netherlands, pp. 31-49. ISBN 978-940076229-9

Ahmad, M. F. and Siang, A. Y. (2013) Modelling of hydrodynamics and sediment transport at Pantai Tok Jembal, Kuala Terengganu Mengabang Telipot, Terengganu, using MIKE 21. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 109-126. ISBN 978-146664318-5

Ghavamian, A. and \xD6chsner, A. (2013) Influence of atomic defects on the mechanical properties of carbon nanotubes. In: Handbook of Functional Nanomaterials. Nova Science Publishers, Inc., pp. 415-432. ISBN 978-162948172-2

Ishak, M. I. and Abdul Kadir, M. R. (2013) Anatomical considerations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-8. ISBN 9783642326028

Kim, D. W. and Suhaimi, M. A. and Kim, B. M. and Cho, M. H. and Chen, F. F. (2013) Rough cut machining for impellers with 3-axis and 5-axis NC machines. In: Lecture Notes in Mechanical Engineering. Springer Heidelberg, pp. 609-616.

Maimun, A. and Nursyirman, I. F. and Sian, A. Y. and Samad, R. and Oladokun, S. (2013) Using AIS data for navigational risk assessment in restricted waters. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 245-254. ISBN 978-146664318-5

Md. Yunus, M. A. M. and Mukhopadhyay, S. C. and Rahman, M. S. A. and Zahidin, N. S. and Ibrahim, S. (2013) The selection of novel planar electromagnetic sensors for the application of nitrate contamination detection. In: Smart Sensors, Measurement and Instrumentation. Springer International Publishing, pp. 171-195.

Olanrewaju, O. S. and Ab. Kader, A. S. (2013) Applying the Safety and Environmental Risk and Reliability Model (SERM) for Malaysian langat river collision aversion. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 193-225. ISBN 978-146664318-5

Olanrewaju, O. S. and Ab. Kader, A. S. and Saharuddin, A. H. (2013) Utilization of simulation for training enhancement. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 277-289. ISBN 978-146664318-5

Conference or Workshop Item

Pesiridis, Apostolos and Rajoo, Srithar (2013) Variable geometry turbocharger active control strategies for enhanced energy recovery. In: 17th Asia Pacific Automotive Engineering Conference, APAC 2013, 1 April 2013 through 3 April 2013, Bangkok; Thailand.

Abd. Rahim, Shayfull Zamree and Sharif, Safian and Mohd. Zain, Azlan and Mohd. Saad, Rozaimi and Fairuz, M. A. (2013) Warpage analysis with straight drilled and conformal cooling channels on front panel housing by using Taguchi method. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov,2013, Bandung, Indonesia.

Abdi, Behzad and Azwan, S. and Abdullah, Mohamed Ruslan and Ayob, Amran (2013) Flexural and tensile behavior of kenaf fibre composite materials. In: International Conference on the Science and Engineering of Materials (ICoSEM 2013).

Abdolahi, Ahmad and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2013) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: 8th International Materials Technology Conference and Exhibition, IMTCE 2012, 9th-12th July 2012, Petaling Jaya, Malaysia.

Abdul Awal, Ziad and Ammoo, Mohd. Shariff (2013) A case study on the air flow characteristics of the hirobo-FALCON 505 controllable helicopter's main rotor blade. In: International Conference on Mechatronics and Computational Mechanics (ICMCM 2013) , 2013.

Abdul Aziz, Azhar and Andwar, Amin Mahmoudzadeh and Muhamad Said, M.F. and Abdul Latiff, Z. (2013) Controlled Auto-Ignition (CAI) combustion in a two-stroke cycle engine using hot burned gases. In: Conference, 2012.

Abdul Aziz, Roseni and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri and Adeyemi, Ademola James and Omar, N. (2013) Relationship between working postures and msd in different body regions among electronics assembly workers in Malaysia. In: 2013 IEEE international Conference on industrial Engineering & Engineering Management, 10-13 Dec, 2013, 2013, Bangkok, Thailand.

Abdul Aziz, Zainal (2013) Crashworthiness of frontal longitudinal of Rain Forest Vehicle (RFV). In: 4th International Graduate Conference on Engineering, Science and Humanities.

Abdul Ghani, M. P. and Yaakob, O. and Ismail, N. and Kader, A. S. A. and Ahmad Sabki, A. F. and Singaraveloo, P. (2013) Experimental analysis of podded propulsor on naval vessel. In: Marine Navigation And Safety Of Sea Transportation: Maritime Transport And Shipping.

Abdul Hamid, Mohd. Foad (2013) Application of probability and statistics in constructing likelihood of failure bands for RBI approach in structural integrity management. In: Conference, 2013.

Abdul Latif, Ainullotfi (2013) Flutter of composite wing by finite element analysis. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) 2-4 July 2013, Kuala Lumpur.

Abdul Malek, Adi Maimun and Nakisa, Mehdi and Tarmizi, Ahmad M. and Ahmed, Yasser Mohamed and Behrouzi, Fatemeh (2013) Numerical study on hydrodynamic resistance of new hull design for multipurpose amphibious vehicle. In: 2nd Inernational Conference on Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013), 2013.

Abdul Rahman, Abdul Halim (2013) A simple method of designing low temperature freezer using double stage refrigeration system for small capacity. In: 12th International Conference on Sustainable Energy Technologies, 2013.

Abdul Rani, Mat Rebi (2013) Association between workers perception and their level of satisfaction with their working environment. In: UNSPECIFIED, 2013.

Abdul Rani, Mat Rebi (2013) Backpain prevalence and backpack culture among Malaysian schoolchildren. In: Human Factor Ergonomic Society of Malaysia, 2013 Conference.

Abdul Rani, Mat Rebi (2013) Development of road safety model for Malaysian road. In: UNSPECIFIED, 2013.

Abdul Razak, Ariffin (2013) Cellular manufacturing system for machine part cell formation and operation sequencing. In: 1st international Materials, industrial, and Manufacturing Engineering Conference,2013, 2013, Johor Bahru, Malaysia.

Abdul Wahid, Mazlan and Dairobi, Ahmed G. and Saat, Aminuddin and Mohd. Sies, Mohsin and Mohammed, Hussein A. and Darus, Amer Nordin and Mohd. Faizal, Hasan and Mohd. Ibthisham, Ardani and Mohd. Yasin, Mohd. Fairus (2013) Pulse detonation engine research development at high speed reacting flow laboratory - hiref, Universiti Teknologi Malaysia. In: Applied Mechanics And Materials.

Abdul Wahid , Mazlan (2013) Experimental investigation of flameless combustion in a laboratory scale apparatus. In: 12th Asian International Conference On Fluid Machinery (12th AICFM, 2013), 25th-27th September 2013, 2013, Hotel Santika Premiere Yogyakarta,Indonesia.

Abdullah, M. Adlan and Ani, Farid Nasir and Hassan, Masjuki (2013) The effects of injection parameters on the performance of common rail light duty engine fueled with palm oil biodiesel. In: 4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013, 17-18 Dec, 2013, Kuala Lumpur, Malaysia.

Abdullah, Mohamed Ruslan and Pang, C. L. and Abu Husain, Nurulakmar and Abdi, Behzad (2013) Indentation fracture behaviour of fibre metal laminates based on kenaf/epoxy. In: International Conference on Mechanical Engineering Research (ICMER 2013).

Abu Bakar, Saiful Anuar (2013) Design of remotely operated vehicle for underwater research. In: Proceedings of 6th Malaysian International Seminar on antarctica (MISA6).

Abu Bakar, Tuty Asma and Tuty Asma Abu Bakar, Tuty Asma and Esah Hamzah, Tuty Asma and Safaa Najah Saud, Tuty Asma (2013) Effect of aging treatment on the microstructures and tensile properties of Cu-Al-Ni-Co shape memory alloys. In: International Symposium on Advanced Materials Science 2013 (ISAM 2013)Japan, 2013, Japan.

Abu Husain, Nurul Akmar and Loog, P. C. (2013) Experimental analysis of bending and axial crush behaviour of single hat longitudinal rail. In: Key Engineering Materials.

Abu Husain, Nurulakmar and Chi, Loog Pang and Abdullah, Mohamed Ruslan and Abu Bakar, M. A. (2013) Experimental analysis of bending and tensile behaviour of aluminium-based fibre metal laminates. In: 9th International Conference on Fracture & Strength of Solids.

Abubakar, T. and Rahman, M. and Stokes, J. (2013) Effect of annealing treatment on the wear properties of ni rich niti alloy coatings. In: 8th International Materials Technology Conference and Exhibition, JUL 09-12, 2012, Petaling Jaya, Malaysia.

Abuelnuor, A. A. A. and Wahid, M. A. and Saat, A. and Sies, M. M. and Osman Abdalla, M. and Ehsan Hosseini, S. and Darus, A. N. and Mohammed, H. A. and Dairobi, A. G. (2013) Effects of firing mode on the performance of flameless combustion: a review. In: Applied Mechanics And Materials.

Abuelnuor, Abuelnuor and Abdul Wahid, Mazlan and Saat, Aminuddin and Hamzah, Afiqah and Mohd. Sies, Mohsin (2013) Characterization of flameless combustion of natural gas in laboratory scale furnace. In: The 6th International Meeting on Advances on Thermofluids, National University of Singapore, Singapore, 22-23 November 2013..

Afshar, Jafar and Zahraee, Seyed Mojib and Bayat, Sajjad and Shahpanah, Ataollah and Syed Hassan, Syed Ahmad Helmi (2013) Improving the layout design of manufacturing company using craft and graph-based method. In: Technology, Education, and Science International Conference.

Ahdash, Abdelsalam and Hamzah, Esah and Ourdjini, Ali and Abdolahi, Ahmad (2013) Characterisation of Zeolite, Polyaniline and Zeolite/Polyaniline As antifouling Materials for Marine Applications. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013).

Ahdash, Abdelsalam and Hamzah, Esah and Ourdjini, Ali and Shamsuri, Siti Rahmah (2013) Effects of cathodic protection and coating on the corrosion rate of carbon steel in stagnant and flowing freshwater. In: Advanced Materials Research (Volume 686).

Ahmad, Norhayati (2013) Low-temperature-sintering of shirasu-balloon powders by using Spark-Plasma-Sintering (SPS) method. In: Japan society of mechanical engineer, JSME conference.

Ahmad, Norhayati and Mohd. Zaidan, N. B. and Mohd. Bazin, M. (2013) Fabrication and characterization of ceramic membrane by gel cast technique for water filtration. In: Green Technologies For Sustainable & Innovation In Materials.

Ahmad, Norhayati and Yuzo, Nakamura and Kamibayasi, Hiroki and Mohamed Bazin, Maisarah (2013) Study on fabrication of ceramic membrane from shirasu balloon for waste water filtration. In: Green Technologies For Sustainable & Innovation In Materials.

Ahmad, Z. and Nagel, G. and Thambiratnam, D. (2013) Inclusion of tapered tubes in enhancing the crash performance of automotive frontal structures. In: Advanced Computational Engineering And Experimenting II.

Ahmad Bakir, A. and Ahmad, Z. A. and Mohamed, M. and Hassan, M. N. H. and Ahmad, M. I. (2013) Feed rate influence on motion error characteristics of CNC vertical milling machine. In: Applied Mechanics And Materials.

Ahmed Abdel Razak, Yasser Mohamed (2013) Fin stabilizer effect on resistance of semi-swath. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA2013).

Ahmed Abdel Razak, Yasser Mohamed (2013) Design and construction of low-cost Remotely Operated UnderWater Vehicle (ROV). In: The International Conference on Marine Safety and Environment, 12-13 November 2013, Johor Bahru, Malaysia. Pg: 250-256.

Almula, Thamir A. D. M. S. and Sharifi, S. and Sharifishourabi, Gholamali and Gohari, Soheil and Ayob, Amran and Yahya, Mohd. Yazid (2013) Static analysis of stitched sandwich beams with functionally graded foam core. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28 - 29 August 2013, Malacca; Malaysia.

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar and Muhamad Said, M. F. and Abdul Latiff, Zulkanain (2013) A converted two-stroke cycle engine for compression ignition combustion. In: 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research, ReCAR 2013, 16 - 18 December 2013, Kuala Lumpur; Malaysia.

Ani, Farid Nasir (2013) Microwave thermal conversion of biomass for biofuels and value-added products. In: 2nd international Conference on Mechanical Engineering And Renewable Energy, 2013.

Ani, Farid Nasir (2013) The effects of injection parameters on the performance and emissions of common rail light duty engine fueled with palm oil biodiesel. In: 4th International Conference on Mechanical and Manufacturing Engineering, 2013.

Ani, Farid Nasir (2013) Solid waste generation in Malaysia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Ani , Farid Nasir (2013) Bioethanol Production From Sago Pith Residue (SPR) using microwave enhanced hydrothermal hydrolysis accelerated by carbon dioxide. In: International Conference of Chemical Engineering and Industrial Biotechnology.

Ani , Farid Nasir (2013) Compatibility study of automobile fuel system in bioethanol and gasoline blends. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Ani , Farid Nasir (2013) Energy analysis on a split-type conditioner using ejector as an expansion device. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material.

Ani , Farid Nasir (2013) Fuel ethanol production from sago waste using microwave assisted thermo-chemical hydrolysis. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Anjomshoae, A. and Abdul Rani, M. R. B. (2013) Assessment of musculoskeletal discomfort and psychosocial work factors among Malaysian bus drivers. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Anshar, Muhammad and Abd. Kader, Ab. Saman and Ani, Farid Nasir (2013) The utilization potential of rice husk as an alternative energy source for power plants in Indonesia. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Anshar, Muhammad and Ani, Farid Nasir and Kader, Ab. Saman (2013) The potential energy of plastic solid waste as an alternative fuel for power plants in Indonesia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Assadian, M. and Idris, M. H. and Shahri, S. M. G. and Gholampour, B. (2013) Gold recovery from weee by chlorine system. In: Applied Mechanics And Materials.

Aung, Lwin Moe and Fakuda, Kanao and Abu, Aminudin and Radzi, Raihan (2013) An investigation of lapping characteristics for mirror like finish using a lathe with linear motor. In: The International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E), 26-28 Nov, 2013, Kuala Lumpur, Malaysia.

Azadnia, A. H. and Ghadimi, P. and Saman, M. Z. M. and Wong, K. Y. and Heavey, C. (2013) An integrated approach for sustainable supplier selection using fuzzy logic and fuzzy AHP. In: Applied Mechanics And Materials.

Bagheri, G. and Hamidi, E. and Wahid, M. A. and Saat, A. and Sies, M. M. (2013) Effects of CO2 dilution on the premixed combustion of CH4 in microcombustor. In: Applied Mechanics And Materials.

Bahari, A. and Sheriff, J. M. and Osman, K. (2013) The effect of wavy groove liner on pressure distribution of journal bearing. In: Applied Mechanics And Materials.

Barzani, M. M. and Yusof, N. M. and Farid, A. A. and Farahany, S. and Davoudinejad, A. (2013) Effects of cutting condition on surface roughness when turning untreated and sb-treated al-11%si alloys using pvd coated tools. In: Applied Mechanics And Materials.

Basha, M. and Azwadi, N. C. S. (2013) Regularized lattice boltzmann simulation of laminar natural convection in entrance region of 2D channels. In: Mechatronics And Computational Mechanics.

Belyamin, Belyamin and Mohd Noor, Alias and Hussein, Mohanad Hamzah and Said, Mazlan (2013) Characterization of diesel engine generator operating at different compression ratio fuelled with palm oil biodiesel. In: Applied Mechanics and Materials (Volume 388).

Cheng, Tung Chong and Hochgreb, Simone (2013) Spray flame study using a model gas turbine swirl burner. In: Applied Mechanics and Materials (Volumes 316-317).

Dairobi, A. G. and Wahid, M. A. and Inuwa, I. M. (2013) Feasibility study of pulse detonation engine fueled by biogas. In: Applied Mechanics And Materials.

Davoudi, Mohammad Mahdi and Öchsner, Andreas (2013) Finite difference approximations of elasto-plastic bending problems: layered approach and error estimates. In: 6th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2012, 1 July - 4 July 2012, Istanbul; Turkey.

Davoudinejad, A. and Noordin, M. Y. and Ghodsiyeh, D. and Ashrafi, S. A. and Barzani, M. M. (2013) Effect of tool wear on tool life and surface finish when machining DF-3 hardened tool steel. In: Applied Mechanics And Materials.

Dzahir, M. A. M. and Nobutomo, T. and Yamamoto, S. I. (2013) Antagonistic mono- and bi-articular pneumatic muscle actuator control for gait training system using contraction model. In: ISSNIP Biosignals and Biorobotics Conference, BRC.

Fadil, M. A. and Jalil, N. A. and Mat Darus, I. Z. (2013) Intelligent PID controller using iterative learning algorithm for active vibration controller of flexible beam. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Faramoushjan, Shahram Ghaedi and Chinaei, Farhad and Bakhsheshi-Rad, Hamid Reza and Idris, Mohd Hasbullah (2013) Effect of fluoride conversion coating on corrosion of behavior of mg-ca-zn alloy. In: Advanced Materials Research (Volumes 712-715).

Fathinia, F. and Heshmati, A. and Parsazadeh, M. and Wahid, M. A. and Sies, M. M. (2013) The influence of various inlet geometries on mixed convection flow of ethylene glycol in a backward facing step. In: Applied Mechanics And Materials.

Fatihhi, S. J. and Syahrom, Ardiyansyah and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq (2013) Mechanical properties of trabecular bone through compression and combined compression-torsion test: a comparative study. In: Applied Mechanics and Materials, Vol. 393, 2013.

Gohari, M. and Abdul Rahman, Roslan and Tahmasebi, M. (2013) Off-road seat suspension optimization by particle swarm algorithm. In: Applied Mechanics And Materials.

Golshan, Abolfazl and Ghodsiyeh, Danial and Gohari, Soheil and Ayob, Amran and Baharudin, B. T. Hang Tuah (2013) Computational inteligence in optimization of machining operation parameters of st-37 steel. In: 2012 International Conference on Mechanical Materials and Manufacturing Engineering, ICMMME 2012, 5 October 2012 through 6 October 2012, Dalian; China.

Golshan, Abolfazl and Ghodsiyeh, Danial G and Gohari, Soheil and Ayob, Amran and B. T.Hang Tuah, Baharudin (2013) Optimization of machining parameters during drilling of 7075 aluminium alloy. In: 2012 International Conference on Mechanical Materials and Manufacturing Engineering, ICMMME 2012, 5 October 2012 through 6 October 2012, Dalian; China.

Hadi, M. S. and Mat Darus, I. Z. and Yatim, H. (2013) Modeling flexible plate structure system with free-free-clamped-clamped (FFCC) edges using particle swarm optimization. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Hafsa, M. N. and Ibrahim, M. and Sharif, S. and Omar, M. F. M. and Zainol, M. A. (2013) Evaluation of different internal structure and build orientation for multijet modeling process. In: Applied Mechanics And Materials.

Hamzah, Esah and Hastuti, Kurnia and Hashim, Jasmi and Chuah, Chuan Eng and Khattak, Muhammad Adil (2013) Effect of solution annealing and low temperature ageing on the micrestructures and superelastic behaviour of ti-50.at.%ni alloy. In: Advanced Materials Research.

Hamzah, Esah and Mudang, Maureen and Khattak, Muhammad Adil (2013) Effect of variation in microstructures on high temperature creep of Fe-Ni-Cr superalloy. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13) Korea.

Hamzah, Esah and Tze, Mi Yong and Chee, Kevin Mun Fai (2013) XRD studies on residual stress of the diamond films grown using hot filament chemical vapour deposition technique on silicon nitride and tungsten carbide substrates. In: Advanced Materials Research (Volume 686).

Hanim, Yatim and Mat Darus, Intan Zaurah and Muhammad Sukri, Hadi (2013) Particle swarm optimization for identification of a flexible manipulator system. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7-9 April 2013, Langkawi, Malaysia.

Haryono, Aries Prih and Sukamto, Edi and Sumeru, Sumeru and Ani, Farid Nasir (2013) Experimenal investigation on the use of secondary refrigerant in freezer for energy savings. In: 1st International Conference on Mechanical Engineering.

Hassan, M. F. and Saman, M. Z. M. and Sharif, S. and Omar, B. (2013) Evaluation of sustainability performance of product design element concepts using analytic hierarchy process. In: Applied Mechanics And Materials.

Hassan, M. F. and Saman, M. Z. M. and Sharif, S. and Omar, B. and Zhang, X. and Badurdeen, F. and Jawahir, I.S. (2013) Selection of product design configuration for improved sustainability using the product sustainability index (prodsi) scoring method. In: Applied Mechanics And Materials.

Hastuti, Kurnia and Hamzah, Esah and Hashim, Jasmi (2013) Effect of ageing treatment on the microstructures of ti-50.7at.%ni shape memory alloy. In: Advanced Materials Research (Volume 686).

Heidari, Milad and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Kashani, Jamal and Syahrom, Ardiyansyah (2013) Effect of humeral stem shape on displacement in elbow implant. In: Applied Mechanics And Materials.

Heshmati, A. and Mohammed, H. A. and Parsazadeh, M. and Fathinia, F. and Wahid, M. A. and Sies, M. M. and Saat, A. (2013) Effect of vertical baffle installation on forced convective heat transfer in channel having a backward facing step. In: Applied Mechanics And Materials.

Hosseini, S. E. and Wahid, M. A. and Abuelnuor, A. A. A. (2013) Biogas flameless combustion: a review. In: Applied Mechanics And Materials.

Hosseini, S. E. and Wahid, M. A. and Abuelnuor, A. A. A. (2013) The role of exhaust gas recirculation in flameless combustion. In: Applied Mechanics And Materials.

Hosseini, S. E. and Wahid, M. A. and Salehirad, S. (2013) Environmental protection and fuel consumption reduction by flameless combustion technology: a review. In: Applied Mechanics And Materials.

Hosseini, S. E. and Wahid, M. A. and Salehirad, S. and Seis, M. M. (2013) Evaluation of palm oil combustion characteristics by using the chemical equilibrium with application (CEA) software. In: Applied Mechanics And Materials.

Idris, Siti Rabiatull Aisha and Ourdjini, Ali and Mohamed Ariff, Azmah Hanim and Osman, Saliza Azlina (2013) Effect of reflow profile on intermetallic compound formation. In: IOP Conference Series: Materials Science and Engineering.

Ishak, M. S. A. and Arizal, M. A. A. and Jaafar, M. N. M. and Norwazan, A. R. and Azmi, I. (2013) Numerical investigation of combustion performance utilizing envo-diesel blends. In: Advanced Materials Research.

Jalil, N. A. and Mat Darus, I. Z. (2013) Non-parametric neuro-model of a flexible beam structure. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Johari, Anwar and Ahmad, Arshad (2013) Analysis of the pyrolytic fuel properties of empty fruit bunch briquettes. In: Conference, 2013.

Kamarul Asri, Asma and Hamzah, Esah (2013) Corrosion behaviour of lead-free and sn-pb solders in 3.5wt% NACL. In: Advanced Materials Research (Volume 686).

Kannan, T. Saravana and Ahmed, A. S. and Ani, Farid Nasir (2013) Energy efficient microwave irradiation of sago bark waste (SBW) for bioethanol production. In: Advanced Materials Research (Volume 701).

Kermani, E. P. and Safdari, A. and Azwadi, C. S. N. (2013) Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM. In: Applied Mechanics And Materials.

Khaleghi, M. and Wahid, M. A. and Seis, M. M. and Saat, A. (2013) Investigation of vortex reacting flows in asymmetric meso scale combustor. In: Applied Mechanics And Materials.

Khattak, Muhammad Adil and Tamin, Mohd N (2013) Effects of thermal aging and absorbed hydrogen on fatigue crack growth behavior of welded C-Mn steels. In: 2nd International Conference on Mechanical, Electronics and Mechatronics Engineering (ICMEME'2013), 17th to 18th June 2013, London, United Kingdom.

Koloor, Seyed Saeid Rahimian and Redzuan, Norizah and Tamin, Mohd. Nasir (2013) Shear-dominated interlaminar fracture process in CFRP composite laminates. In: 9th International Conference on Fracture & Strength of Solids, 9-13 Jun 2013, Jeju, South Korea.

Kuan, Yew Wong and Madadi, Najmeh (2013) A deterministic aggregate production planning model considering quality of products. In: 2013 International Conference On Manufacturing, Optimization, Industrial And Material Engineering (MOIME 2013).

Kurniawan, Denni and Jiawkok, N. and Noordin, M. Y. (2013) Machining conditions effect to machining temperature and forces in orthogonal machining of bone. In: Advanced Materials Research (Volume 658).

Leong, Mohd. Salman and Abdelrhman, Ahmed M. and Hee, Limmeng and Hui, K. H. (2013) Vibration analysis of multi stages rotor for blade faults diagnosis. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Leong, S. A. N. and Samin, P. M. and Idris, A. and Azizul, M. A. and Misran, E. (2013) Effect of pao-based g-fe2o3 and surfactant concentration on viscosity characteristic. In: Applied Mechanics And Materials.

Mantari, M. H. A. R. and Eldrainy, Y. A. and Jaafar, M. N. M. (2013) Spray characterization of palm olein/diesel blends under various injection pressures. In: Advanced Materials Research.

Masood, Ibrahim and Hassan, Adnan (2013) A framework for multivariate process monitoring and diagnosis. In: Applied Mechanics And Materials.

Masood, Ibrahim and Hassan, Adnan (2013) Multivariate process monitoring and diagnosis: a case study. In: Applied Mechanics And Materials.

Mat Hussin, Ab. Talib and Intan Zaurah, Mat Darus (2013) Self-tuning PID controller for active suspension system with hydraulic actuator. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7 April 2013 - 9 April 2013, Langkawi, Malaysia.

Mat Lazim, Mat Lazim and Ahmad Razimi, Ahmad Razimi and Abu Bakar, Abd. Rahim and Abdul Hamid, Abu Bakar and Abdul Hamid, Mohd. Kameil and Elleuch, Riadh (2013) The effect of external grit particles on brake squeal noise of commercial brake pads. In: Eurobrake 2013, 2013, Germany.

Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim and Kchaou, Mohamed (2013) The study of disc brake noise on three different types of friction Materials. In: The 2nd International Conference on Recent Advances In Automotive Engineering & Mobility Research (Recar 2013)Materials, 2013.

Mazalan, N. A. and Malek, A. A. and Wahid, M. A. and Mailah, M. and Saat, A. and Sies, M. M. (2013) Main steam temperature modeling based on levenberg-marquardt learning algorithm. In: Applied Mechanics And Materials.

Md Lazin, M. N. and Mat Darus, I. Z. and Ng, B. C. and Kamar, H. M. (2013) Genetic algorithm identification for automotive air-conditioning system. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Meng, Soon Chiong and Rajoo, Srithar and Costall, Aaron W. and Wan Salim, Wan Saiful-Islam and Romagnoli, Alessandro and Martinez-Botas, Ricardo F. (2013) Assessment of cycle averaged turbocharger maps through one dimensional and mean-line coupled codes. In: ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, June 3–7, 2013, San Antonio, Texas, USA.

Mohamad Yusof, Mohamad Yusof and Zainal, Z.A. and Ani, Farid Nasir and Miskam, M.A. (2013) An investigation of a self-pressurized alpha V-Type stirling engine converted diesel engine. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Mohamed Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatul Aisha and Osman, Saliza Azlina (2013) Effect of isothermal aging 2000 hours on intermetallics formed between ni-pd-au with sn-4ag-0.5cu solders. In: Advanced Materials Research.

Mohamed Bazin, Maisarah and Ahmat, Muhd. Amirudin and Mohd. Zaidan, Nurhanna and Ismail, Ahmad Fauzi and Ahmad, Norhayati (2013) Effect of starch addition on microstructure and strength of ball clay membrane. In: International conference on membrane science and technology, MST 2013.

Mohammed, H. A. and Golieskardi, M. and Munisamy, K. M. and Wahid, M. A. (2013) Combined convection heat transfer of nanofluids flow over forward facing step in a channel having a blockage. In: Applied Mechanics And Materials.

Mohammed, H. A. and Om, N. I. and Wahid, M. A. (2013) Effect of inclination angle on three-dimensional combined convective heat transfer of nanofluids in rectangular channels. In: Applied Mechanics And Materials.

Mohd Ibthisham, A. and Rajoo, S. and Nordin, A. and Wahid, M.A. and Sies, M. M. and Saat, Aminuddin (2013) Simulation of corrected mass flow and non-adiabatic efficiency on a turbocharger. In: 5th International Meeting on Advances of Thermofluids, NOV 12-13, 2012, Bintan Island, INDONESIA.

Mohd. Ghazali, Normah and Abd. Rahim, I. and Quenet, T. and Ab. Muin, Z. (2013) Investigation of the velocity profiles in a ninety-degree curved standing wave resonator with particle image velocimetry. In: Applied Mechanics And Materials.

Mohd. Yusof, Khairiyah and Phang, Fatin Aliah and Kamaruddin, Mohd. Johari and Hassim, Mimi Haryani and Hashim, Haslenda and Sadikin, Aziatul Niza and Jamaluddin, Jamarosliza and Othman, Norhayani and Hassan, Hashim and Syed Hassan, Syed Ahmad Helmi and Abdul Aziz, Azmahani and Ujang, Zaini (2013) Inculcating sustainable development among engineering students, part 1: designing problems and learning environments with impact. In: Engineering Education for Sustainable Development.

Nasaruddin, M. A. and Abdul Hamid, Mohd. Kameil and Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim (2013) Effects of external hard particles on brake noise of disc braking system. In: Applied Mechanics And Materials.

Nasution, Henry and Yamani, M. H. Z. and Sumeru, K. (2013) Performance study of DC compressor for automotive air conditioning system. In: Advances In Power And Electrical Engineering, Pts 1 And 2.

Nazim, E. M. and Izman, S. and Ourdjini, A. and Abubakar, T. and Mas Ayu, H. (2013) Adhesion strength of HFCVD diamond coating on WC substrate seeded with diamond and different ratios of SiC powders. In: MIMEC 2013 : 1st International Materials, Industrial, and Manufacturing Engineering Conference, 4-6 Dec 2013, Johor Bahru, Johor.

Nekooei, M. J. and Jaswar, J. and Priyanto, A. (2013) Designing fuzzy backstepping adaptive based fuzzy estimator variable structure control: applied to internal combustion engine. In: Applied Mechanics And Materials.

Ng, B. C. and Darus, I. Z. M. and Kamar, H. M. and Norazlan, M. (2013) Application of multilayer perceptron and radial basis function neural network in steady state modeling of automotive air conditioning system. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Ng, B. C. and Mat Darus, I. Z. and Kamar, H. M. and Md. Lazin, M. N. and Hussein, M. (2013) Dynamic modeling of an automotive air conditioning system and an auto tuned PID controller using extremum seeking algorithm. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Niakan, A. and Idris, M. H. and Ourdjini, A. and Karimian, M. (2013) Effect of applying air pressure on gas porosity in lost foam casting of al-si alloy. In: Advanced Materials Research.

Norafifah, H. and Noordin, M. Y. and Izman, S. and Kurniawan, D. (2013) Acid pretreatment of wc-co for surface roughening and cobalt removal prior to CVD diamond coating. In: Applied Mechanics And Materials.

Oktaviandri, Muchamad and Hassan, Adnan and Mohd. Shaharoun, Awaluddin (2013) Decision support tool for job shop scheduling with job cancellation. In: International Conference on Engineering of Tarumanagara (ICET 2013).

Omar, Nor Miza Hazwani and M. Tap, Masine and Redzuan, Norizah (2013) Conceptual optimization model of inventory/distribution network with multi role nodes. In: International Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), 4-6 December 2013, Johor Bahru, Malaysia.

Onn, Irwan Herman and Ahmad, Norhayati and Tamin, Mohd. Nasir (2013) Fatigue characteristics of dual phase steel sheets. In: 9th International conference on fracture & strength of solids.

Parsazadeh, M. and Fathinia, F. and Heshmati, A. and Wahid, M. A. and Sies, M. M. (2013) Numerical study on heat transfer of turbulent flow in a channel with composite arrangement obstacles. In: Applied Mechanics And Materials.

Priyanto, Agoes and Najmi, M. and Maimun, A. and Mohamed, Y. (2013) Effect of increasing rudder deflection on rudder inflow for LNG vessel in shallow water. In: 2nd International Symposium on Materials Science and Engineering Technology, 27- 28 June 2013, Guangzhou, China.

R., Rosli and M., Mailah (2013) Active force control with iterative learning control algorithm applied to vehicle suspension system. In: 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13) April 2-4, 2013,Kuala Lumpur, 2013.

Rad, M.S. and Ahmad, Z. and Prawoto, Y. (2013) Application of auxetic foam in energy absorbing system of automotive bumper. In: 7th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2013).

Ramdan, R. D. and Djuansjah, J. R. P. and Kadir, M. R. A. and Nur, H. and Hamzah, E. (2013) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: Advanced Materials Research.

Ramdan, Raden Dadan and Djuansjah, Joy Rizki Pangestu and Suratman, Rochim and Hamzah, Esah and Sudin, Izman (2013) Effect of Cold Rolling Treatment on the Formation of Titanium Oxide Layer on Ti6Al4V Alloys by Thermal-electrochemical Anodizing Processes. In: Materials Science Forum.

Rashidi, Mohd. M. and Idris, Mohd. Hasbullah and Shayfull, Z. (2013) The effect of inoculation on properties of modified ductile Ni-resist alloy. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov, 2013, Bandung, Indonesia.

Rozaini, Ahmad Humaizi and Ishak, Mohd. Razmi and Abu Bakar, Abd. Rahim and Mohd. Zain, Mohd. Zarhamdy (2013) Performance of a fully mechanical parking brake system for passenger cars. In: Iop Conf. Series:Materials Science and Engineering 50 (2013), 2013.

Rozaini, Ahmad Humaizi and Ishak, Mohd. Razmi and Quettier, Nicolas and Abu Bakar, Abd. Rahim and Mohd. Zain, Zarhamdy (2013) Performance of an Electro-Mechanical Parking Brake (EMPB) system. In: 4Th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), 2013.

Rusdi, Nur and Noordin, M. Y. and Izman, S. and Kurniawan, Denni (2013) The effect of cutting parameters on power consumption during turning nickel based alloy. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Saadun, M. N. A. and Azwadi, C. S. N. and Hazwani, M. N. and Zakaria, M. S. and Manaf, M. Z. A. and Hanafi, M. H. (2013) Numerical analysis on the effects of cavity geometry with heat towards contaminant removal. In: Applied Mechanics And Materials.

Saat, Aminuddin and Abdul Wahid, Mazlan and Mohd Farid, Muhamad Said (2013) Early flame development in the combustion of droplet and vapour mixtures. In: Applied Mechanics And Materials.

Saiman, Mohd. Pahmi and Wahab, Mohd. Saidin and Wahit, Mat Uzir (2013) The effect of yarn linear density on mechanical properties of plain woven kenaf reinforced unsaturated polyester composite. In: 4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013, 17-18 Dec, 2013, Kuala Lumpur, Malaysia.

Saqr, K. M. and Wahid, M. A. (2013) Entropy generation in turbulent swirl-stabilized flame: effect of hydrogen enrichment. In: Applied Mechanics And Materials.

Sarip, A. R. and Musa, M. N. (2013) Friction analysis on vane of an existing and of a novel multi vane rotary compressor. In: Applied Mechanics And Materials.

Shaharuddin, N. M. R. and Mat Darus, I. Z. (2013) Fuzzy-pid control of transverse vibrating pipe due to vortex induced vibration. In: UKSIM-AMSS 15th International Conference On Computer Modelling And Simulation (UKSIM 2013).

Shaharuddin, Nik Mohd Ridzuan and Intan Zaurah, Mat Darus (2013) System identification of flexibly mounted cylindrical pipe due to vortex induced vibration. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7 April 2013 - 9 April 2013, Langkawi, Malaysia.

Sharifi, S. and Almula, T. A. D. M. S. and Gohari, S. and Sharifishourabi, G. and Saed, Y. and Yahya, M. Y. B. (2013) Impact response of laminated composite cylindrical shell: finite element simulation approach. In: Applied Mechanics And Materials.

Sheldareh, A. A. and Safdari, A. and Sidik, N. A. C. (2013) Numerical prediction of heat transfer from localized heating in enclosure using cip method. In: Applied Mechanics And Materials.

Sidik, N. A. C. and Safdari, A. (2013) Numerical investigation of 2-D free convection of nanofluid in L-shaped enclosure. In: Applied Mechanics And Materials.

Sulaimon, Shodiya and Abdul Aziz, Azhar and Nasution, Henry and Darus, Amer Nordin (2013) Investigation of various mixtures of hc290/hc600 refrigerants in adiabatic capillary tube used in split-type air-conditioner. In: Applied Mechanics and Materials (Volume 388).

Sumeru, Kasni and Nasution, Henry and Ani, Farid Nasir (2013) Thermodynamic analysis of ejector as an expansion device on split-type air conditioner using R410A as working fluid. In: International Conference on Mechanical Engineering, ICOME 2013, 19-21 Sep,2013, Mataram, Lombok, Indonesia.

Syahrullail, S. and Ani, F. N. and Golshokouh, I. (2013) Wear resistance characteristic of vegetable oil. In: 2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013), MAR 26-27, 2013, Penang, Malaysia.

Syahrullail, S. and Yahya, W. J. and Wan Nik, W. B. and Tiong, Chiong Ing (2013) The effect of sliding speed on friction and wear of RBD palm olein. In: 3rd International Conference on Mechanical and Manufacturing Engineering, ICME 2012, 20 November 2012 through 21 November 2012.

Syahrullail, S. and Yahya, W. J. and Wan Nik, W. B. and Fawwaz, W. N. (2013) Friction characteristics of RBD palm olein using four-ball tribotester. In: 3rd International Conference on Mechanical and Manufacturing Engineering, ICME 2012, 20 November 2012 through 21 November 2012.

Syed Hassan, Syed Ahmad Helmi and Mohd. Yusof, Khairiyah and Phang, Fatin Aliah and Mohammad, Shahrin and Abu, Mohd. Salleh (2013) Inculcating team-based problem solving skills, part 1: enhancing problem solving elements. In: Research In Engineering Education Symposium.

Tahmasebi, M. and Abdul Rahman, Roslan and Mailah, M. and Gohari, M. (2013) Active force control applied to spray boom structure. In: Applied Mechanics And Materials.

Teo, Aaron Edward and Pesiridis, Apostolos and Rajoo, Srithar (2013) Effects of mechanical turbo compounding on a turbocharged diesel engine. In: 17th Asia Pacific Automotive Engineering Conference, APAC 2013, 1 April 2013 through 3 April 2013, Bangkok; Thailand.

Tuan Kamaruddin, Tengku N A and Intan Zaurah, Mat Darus (2013) PID controller for idle speed control. In: Proceedings - UKSim 15th International Conference on Computer Modelling and Simulation, UKSim 2013, 10-12 April 2013, Cambridge, UK.

Wahab, H. A. and Noordin, M. Y. and Hussain, M. S. and Izman, S. (2013) Characteristics of electroplated nickel layer on tungsten carbide. In: Applied Mechanics And Materials.

Wahid, M. A. and Gholami, A. A. and Mohammed, H. A. (2013) Numerical study of fluid flow and heat transfer enhancement of nanofluids over tube bank. In: Applied Mechanics And Materials.

Wardoyo, T. T. B. and Izman, S. and Kurniawan, D. (2013) Effect of process parameters on quality of cold spinned tube head. In: Applied Mechanics And Materials.

Wong, Kuan Yew and Khakdaman, Masoud and Zeinahvazi, Milad and Zohoori, Bahareh and Nasiri, Fardokht (2013) Healthcare system simulation using witness. In: IC-MSQUARE 2012: International Conference On Mathematical Modelling In Physical Sciences.

Wong, Kuan Yew and Nikakhtar, Amin and Zarebidaki, Ali (2013) Document management in construction for shorter project lead time using web-based software. In: ICSDEC 2012: Developing the Frontier of Sustainable Design, Engineering, and Construction - Proceedings of the 2012 International Conference on Sustainable Design and Construction.

Yaakob, Y. and Yusop, M. Z. and Takahashi, C. and Kalita, G. and Ghosh, P. and Tanemura, M. (2013) Room-temperature fabrication of au- and ag-incorporated carbon nanofibers by ion irradiation and their field emission properties. In: Japanese Journal Of Applied Physics.

Yazid, A. W. M. and Sidik, N. A. C. (2013) Prediction of the flow around a surface-mounted cube using two- equation turbulence models. In: Applied Mechanics And Materials.

Yob, Mohdshukri and Mansor, Shuhaimi Shuhaimi and Sulaiman, Razali (2013) Finite element modelling to predict equivalent stiffness of 3D space frame structural joint using circular beam element. In: 2013 International Conference on Mechanical Engineering, Industrial Materials and Industrial Electronics, MII 2013, 1 September 2013 through 2 September 2013, Hong Kong; China.

Yong, T. M. and Hamzah, Esah (2013) Effects of various seeding methods on multi-layered diamond coatings deposited via hot filament chemical vapor deposition. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013)Johor Bahru.

Yusof, Mustafa and Afripin, Mohammad Amirul Affiz (2013) Effect of beam profile size on bus superstructure strength having rollover crash. In: 2013 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM), 2013, Kuala Lumpur.

Zakaria, M.S. and Osman, K. and Saadun, M. N. A. and Manaf, M. Z. A. and Mohd. Hanafi, M. H. (2013) Computational simulation of boil-off gas formation inside liquefied natural gas tank using evaporation model in ansys fluent. In: Applied Mechanics And Materials.

Book

Che Sidik, Nor Azwadi (2013) An introduction to the computational fluid dynamics. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0884–3

Hashim, Jasmi (2013) Sains bahan. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0852–2

Thesis

Hourmand, Mehdi (2013) Fabrication of CuW electrode for producing micro-hole on WC-Co using EDM process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Rahman, Mohd. Darnalis (2013) Cellular manufacturing system development for machine-part cell formation and operation sequencing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aarabi, Majid (2013) An extended framework for implementing of enterprise resource planning for small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Elhameed, Ahmed Bakheit Ahmed (2013) Production of biodiesel from jatropha oil by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Latiff, Nur Dianah (2013) Fatigue life prediction in a cancellous bone structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahim, Saiful Azril (2013) Study on defect of aluminium filled epoxy mold insert in injection molding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdollahi, Ayoub (2013) Numerical investigation of fluid flow and heat transfer in rough microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Ghaffar, Mohd. Salahuddin (2013) Performance evaluation of end milling aluminium epoxy using HSS cutting tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kadir, Khairuldean (2013) Tribological studies of metal v-belt cvt lubricants for automotive application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Muhammad Khairi (2013) Parameter analysis on wire-cut EDM process of silicon carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abg. Mohd. Mohtar, Abang Mohamad Aizuddin (2013) Dynamic analysis of an Air Handling Unit (AHU). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abrishamkar, Mehran (2013) TCP/IP-based control and monitoring of manufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Hassan, Mohd. Akmal (2013) Life cycle cost analysis of a floating production storage offloading vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adamu, Gidado Bashir (2013) Experimental investigations of cutting parameters influence on cutting forces, surface roughness and tool life when finish hard turning of Stavax ESR steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adnan, Muhammad Hafiz (2013) Electrical discharge machining of silicon carbide using graphite electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Mohd. Azizi Aqmar (2013) Performance evaluation of tungsten inert gas (TIS) welding on aluminium alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmadipourroudposht, Mohaddeseh (2013) Optimization of electrospinning process to fabricate core/shell structure of magnetic nanofibers via ''RSM''. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed, Mohd. Farid (2013) Catenary mooring with its dynamic effects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Akbary, Saeed (2013) Critical factors to assess safety requirements of manufacturing companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Ainni (2013) Product design improvement through integration of Design for Assembly (DFA) and Theory of Inventive Problem Solving (TRIZ) methodologies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Mohd. Azahar (2013) Risk model for electrical and instrumentation installation for power generation system onboard ship. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alqahtani, Abdullah Hadi Abdullah (2013) The effect of temperature on productivity among office workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alvi, Omair Ali (2013) Mathematical modeling using Matlab to evaluate fuel ferrying strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amrina, Elita (2013) Sustainable manufacturing performance evaluation tool for automotive companies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anbari, Saba (2013) Simulation modeling of a flexible multi product assembly line for electronic industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arezoudar, Ehsan Fallahi (2013) Performance evaluation of electrospinning process to fabricate core/shell structure of magnetic nanofibers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arsat, Zainal Abidin (2013) Numerical analysis of bovine trabecular bone by using physiological loads specific to normal walking loads and down stairs loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahador, Hamid (2013) The effect of substrate temperature of titanium aluminium nitride coating on titanium alloy (TI-6AL-4V) substrate using PVD method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahri, Bahram (2013) Modeling and experimental analysis of exhaust gas temperature and misfire in a converted-diesel homogeneous charge compression ignittion engine fuelled with ethanol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahrom, Norelyani (2013) Computational study on the effect of temperature in fluidized bed gasifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakhsheshi Rad, Hamid Reza (2013) Enhancement of corrosion resistance of magnesium by alloying, fluoride treatment and nano-hydroxyapatite coating for biomedical applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baniani, Ali Mohammad (2013) Development of extended mathematical models for inventory control of perishable items in uncertainty environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behrouzi, Farzad (2013) An integrated stochastic-fuzzy method for supply chain leanness evaluation in Iranian automotive small and medium enteprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Borghei, Seyed Nima (2013) Determination of the influence of interface delamination on the elastic properties of fiber reinforced composite materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boroujeni, Sahar (2013) Mechanics of L-bending process for dual phase steel sheets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chanthuru Thevendram (2013) A neural network approach for machine breakdown repair time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Mud, Muhammed Fadley (2013) Electrical discharge machining of silicon carbide using brass electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong Hooi, Lim (2013) Design of floating water wheel for power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Choo, Shyh Jing (2013) The effect of substrate temperature of (Ti,A1)N coating on AISI 304L stainless steel and high speed steel using physical vapor deposition (PVD) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Daroonparvar, Mohammadreza (2013) Evaluation of nanostructured bond coat in thermal barrier coating system with nano alumina layer during oxidation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Davoudi, Mohammad Mahdi (2013) Elastic and plastic bending of the beams by finite difference method (FDM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ebrahimi, Amirhossein (2013) Expected life cycle cost for systems with repairable components. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Enzevaee, Aria (2013) Intelligent active force control of a single link robot arm actuated by pneumatic artificial muscles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Foroutan, Amir (2013) Indentation study of honeycomb sandwich composite materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghaffari Shahri, Seyed Morteza (2013) Effect of solution treatment on corrosion characteristics of MG-6ZN alloy as a biodegradable implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghanbari, Sasan Vosough (2013) Enhancement of the mechanical properties of stainless steel 316L for bio-medical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghandvar, Hamidreza (2013) The wettability enhancement of SIC particles in cast aluminium A356 matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghandvar, Hamidreza (2013) The wettability enhancement of SiC particles in cast aluminum a356 matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghanimi, Armin (2013) Flexural behavior of sandwich composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghashami, Seyed Sajad (2013) Development of an optimization model for scheduling, assignment and sequencing of hollow fiber membrane production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Goh, Kian Heng (2013) Effects of Ni3Ti (DO24) Precipitates and composition on Ni-based superalloys using molecular dynamics method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hafifi Abdullah, Mohd. Aliff (2013) Development of nitrocellulose based binder for ammonium perchlorate/aluminium solid propellant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hameed, Mohanad J. (2013) Characteristics of diesel engine using waste cooking oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Afiqah (2013) Performance of flameless combustion using palm oil mill effluent biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Nuryusliha (2013) Invention through integration of Design for Assembly (DFA) and Theory of Inventive Problem Solving (TRIZ) methodologies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemzadeh, Mohammadhassan (2013) Analytical hierarchy process application in greenness comparison of machine tool system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haslan, Nur Hasmisha (2013) Effects of heat treatment on the microstructures and electrochemical behavior of stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasmi, Ahmad Hazlan (2013) Optimization of plastic mould conformal cooling for increasing production rate of plastic product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Kamarul Arifin (2013) Experimental study on the feasibility of detonation as the combustion mode for internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hatami, Milad (2013) Improving productivity in a bank by using computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hejazi, Saro (2013) Postgraduate research students' satisfaction in University Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heshmati, Amirhossein (2013) Mixed convection heat transfer over backward facing step having a slotted baffle by using nanofluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hooshyarfard, Hooman (2013) Failure analysis of notched composite plates with bushings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyedeh Sabereh (2013) Multi-floor facility layout improvement using systematic layout planning and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseiniezhad, Navid (2013) Worker greenness index. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hourmand, Mehdi (2013) Fabrication of CuW electrode for producing micro-hold on Wc-Co using EDM process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim Abuobeida Mohammed Ali, Abuobeida (2013) Heat transfer enhancement by using nanofluids flow and conical ring inserts in circular tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ikhwan Zaid, Muhamad Nor (2013) Simulations of catalytic ozone decomposition reaction in fluidized bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohd. Azali (2013) Steady-state CFD simulation of gas-solid flow for inlet boundary conditions in a fluidized bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Azlin (2013) Numerical simulation of fluid-solid interaction flow for two different cavity shapes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Hina Muhammad (2013) Large deforamation of thin-walled tubular structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Izadifar, Mozhgan (2013) Feasibility study on the implementation of optimized production technology in a manufacturing company by simulationmodelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamalludin, Jerrize Izah (2013) Product design improvement through Design for Assembly (DfA) and Theory of Inventive Problem Solving (TRIZ) methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, Nur Fateha (2013) A study on comparison between solar cooling system and conventional cooling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamil, Norhazrina (2013) Methodology of sustainability assessment for membrane manufacturing processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jiawkok, Nammon (2013) Machining of bone: an analysis of cutting force, surface integrity and chip morphology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kermani, Emad Pouryazdanpanah (2013) Simulation of fluid-solid flow using lattice Boltzman method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khalid, Hadi (2013) Energy conversion from suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khodaei, Seyed Hossein (2013) Solving rehability redundancy allocation problem using simulated annealing algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khorami, Komeyl (2013) Lifetime prediction of rubber rollers in mass printing machines based on artificial neural networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khoshbakht, Pezhman Ahmadi (2013) Modeling of warranty cost for a lifetime warranty policy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Boon Shing (2013) Guided wave propagation in plate having trussed structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lestari, Arfena Deah (2013) Contribution of human factors to shipping safety. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Fei Min (2013) Guided wave propagation in assymetrical corrugated plates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Loke, Keng Bin (2013) Terminal expansion model for a container port for Johor port. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Makvandi, Resam (2013) Numerical simulation of composite materials reinforced with carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Adila Maisyarah (2013) Development of absorbent materials for open sea spillage oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masoomzadeh, Reza (2013) Lattice Boltzmann simulation of nanofluid in square cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Yusop, Noraide (2013) Modelling damping element to reduce disc brake squeal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Miriha, Seyyed Masih (2013) Solving reliability redundancy allocation problem in using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Miriha, Seyyed Masih (2013) Solving reliability redundancy allocation problem using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirzapourrezaei, Seyyedali (2013) The capacitated minimax location-allocation problem with probabilistic customer locations and border crossing constraints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mofarrahi, Maryam (2013) Development of a dynamic simulation model for inventory level optimization through supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mofarrahi, Maryam (2013) Development of dynamic simulation model for inventory level optimization through supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moghadam, Ali Mokhtari (2013) Optimization of pipe spool fabrication shop scheduling using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Hafizah (2013) System identification and PID controller of flexible beam structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Faezal Omar Baki (2013) Product design improvement through Theory of Inventive Problem Solving (TRIZ) approach and Design for Manufacture and Assembly (DFMA) methodology for consumer product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Shariff, Mohamad Sharidan (2013) Evaluation of incremental feed rate in drilling austenitic 316L stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Saeed, Somia Alfatih (2013) Nonlinearity detection in hydraulic machines utilizing bispectral analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad, Parsazadeh (2013) Nanofluids turbulent flow and heat transfer in channels with detached rib-arrays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Adham, Ahmed (2013) Optimization of an ammonia-cooled rectangular microchannel heat sink using genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Eadey, Eliyana (2013) Effectiveness of six sigma implementation in hard disc manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jais, Khairul Anuar (2013) Product design improvement through Design for Assembly (DFA) methodology and Theory of Inventive Problem Solving (TRIZ) approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mukhtar, Azfarizal (2013) CFD: assessment on different bed height effect over drag model of fluidized bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muvariz, Mufti Fathonah (2013) Fluid flow characteristic around round-shaped FPSO. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Naderian, Kasra (2013) Kinematic and dynamic analysis of passive suspension using pneumatic and flexible tire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Naghani, Siamak Fereidooni (2013) A one-dimensional implementation of a coupled elasto-plastic model for ductile damage based on the Gurson approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nambaraja, Kuberaraaj (2013) Development of a 10 newton hydrogen peroxide monopropellant rocket thruster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nejad, Ali Farokhi (2013) Structural analysis of new modular and lightweight automobile body structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, See Kiat (2013) Improving the insertion loss of traffic noise barrier in urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Yen Cheong (2013) Computation analysis of nanofluids in car radiator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ngali, Mohd Zamani (2013) Three dimensional integrated software development for air-particle flow simulation through image-based upper human airways. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Odemadighi, Miwori (2013) Flexible manipulator modelling and vibration control using end-point residual velocity feedback. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Oh, Pui Kuen @ Koh Pui Kuen (2013) Natural convection of nanofluid from a heated inner square enclosure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ojaghi, Yosra (2013) Production layout optimization for small and medium scale food industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osia, Seyedel (2013) Laminar nanofluid flow over periodic two dimensional rectangular baffled channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Khairizal (2013) Comparative analysis on maintennace and repair cost of different types of shipboard fixed fire extinguishing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Tahrin (2013) Performance evaluation of drilling aluminium filled epoxy using HSS cutting tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Umi Kalsom (2013) Lean manufacturing system implementation: a case study in food processing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Patrick, Bayo-Philip (2013) Application of low cost air drying model in traditimol shipbuilding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Piroozfard, Hamed (2013) Solving a multi-objective job shop scheduling problem using a hybrid genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Prayetno, Eko (2013) Wing-in-ground for rescue operation in Kepulauan Riau. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Putra, Risandi Dwirama (2013) Modeling reccurence motion on a large volume semisubmersible. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Radhwan Hussin (2013) An optimization of the plastic injection molding parameters for sport equipment by using doe methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahimuddin, Rahimuddin (2013) Seakeeping performance of semi-SWATH in following sea using controlled fins stabilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahimuddin, Rahimuddin (2013) Seakeeping performance of semi-swath in following sea using controlled fins stabilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ranjbaran, Alireza (2013) Modeling lifetime warranty policy involving cost sharing between manufacturer and module supplier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Renani, Nafiseh Chorbani (2013) AHP model for optimum distribution network selection in food industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rizvi, Syed Mustijab Haider (2013) Finite element analysis of aircraft coreless spoiler structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rosli, Muhammad Firdaus (2013) Study of stress distribution in a cylinder using photo-elasticity method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rosli, Rosmazi (2013) Active force control with iterative learning control algorithm for a vehicle suspension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roudsari, Arousha Haghighian (2013) A bi-objective stochastic single facility location model for a supermarket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rusdi, Muhammad Aizuddin (2013) Thermal distribution in annulus with nanofluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S. K. Elghariani, Badreddin Giuma (2013) Enhanced stress prediction correlation for abdominal aortic aneurysm using fluid structure interaction technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabar, Mustafa Muneim (2013) Effect of nitrogen pressure on Ti /TiA1 coating on 304 stainless steel by PVD-DC magnetron sputtering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabar, Mustafa Muneim (2013) Effect of nitrogen pressure on Ti/TiAl coating on 304 stainless steel by PVD-DC magnetron sputtering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saeed, Akbarnatajbisheh (2013) Developing defuzzifying method of fuzzy time-variant series for forecasting product demand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samsuddin, Nurul Asyikin (2013) Anomaly detection for controlling data accruracy in service industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samsuddin, Nurul Asyikin (2013) Anomaly detection for controlling data accuracy in service industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sanusi, Sanusi (2013) Optimization of round shape floating LNG supply chain efficiency with simulation modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saputra, Hendra (2013) Estimation and distribution of exhaust ship emission from marine traffic in the Straits of Malacca and Singapore using Automatic Identification System (AIS) data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seyedi, Seyednavid (2013) Development of data modification method for optimization of forecasting performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahrul Azhar, Ilya Izyan (2013) Creep characteristics of austenitic stainless steel foil at elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shilandari, Hooman (2013) Development of a mixed binary integer programming model for nurse-patient assignment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soh, Chee Hong (2013) Supply chain performance improvement of government clinics using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soleimani, Mehran (2013) Laminar mixed convective nanofluids flow over a triple forward facing step having a circular cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Subramaniam, Baby Priyadharshini (2013) Evaluation of ABS hollow & solid pattern for the production of long stem hemi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sunarsih, Sunarsih (2013) Profiling and ranking of marine propulsion plant based on fuzzy multi criteria decision making method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syed Hassan, Syed Abdul Hamid (2013) Faktor kejayaan kritikal ke arah pembentukan model untuk melaksanakan pengurusan keselamatan menyeluruh. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syed Noh, Sharifah Nur’Ai Shikin (2013) Evaluation of rusinek-klapaczko model for high strain rate response of steel sheets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syed Walid Syed Omar, Al-Saggoff (2013) Human approach in analyzing slips and falls using siliconcoach software: a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Hwee Mean (2013) Vibration based bearing fault diagnosis identification using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tang, Chern Fon (2013) Characterization of green corrosion inhibitor using Taguchi dynamic approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thirugnanam, Theeba (2013) Experimental rig for human-vibration study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tiong, Chiong Ing (2013) Tribological behaviour for refined, bleached and deodorized of palm olein and palm stearin using fourball tribotester. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tukimin, Mohd. Zulkhaairi (2013) Application of response surface methodology in optimizing electroplating parameters of nickel interlayer on tungsten carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ullah, Aleem (2013) Development of multi-criteria decision analysis methodology to determine product end-of-life treatment options. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vanaki, Shayan Mokhtarpour (2013) Numerical study of nanofluid forced convection flow in channels using different shaped transverse ribs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yap, Weng Suon (2013) Vibration induced fatigue failure in piping system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yap, Weng Suon (2013) Vibration induced fatigue failure piping system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yengejeh, Sadegh Imani (2013) Dynamic analysis of aircraft landing gear. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yousefi, Moslem (2013) A new optimal design approach for plate-fin heat exchangers by evolutionary computation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zahraee, Seyed Mojib (2013) Productivity optimization of manufacturing system using computer simulation, design of experiment and response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Nor Azlina (2013) Document management improvement with prototype database : a case study in a distribution centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zarchi, Farzad Ramesh (2013) Simulation of roof solar chimney for vertical axis wind turbine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.