Items where Year is 2013

Article

Hussain, Fitdriyah and Abdul Kadir, Mohammed Rafiq and Zulkifly, Ahmad Hafiz and Sa’at, Azlin and Abd. Aziz, Azian and Hossain, Md. Golam and Tunku Zainol Abidin, Tunku Kamarul Zaman and Syahrom, Ardiyansyah (2013) Anthropometric measurements of the human distal femur: a study of the adult Malay population. Biomed Research International . ISSN 2314-6133

A. Harris, Arief Ruhullah (2013) Heart sound feature representation using extended modified bdistribution. Transactions of Japanese Society for Medical and Biological Engineering, 51 . R-204. ISSN 1881-4379

Abdul Kadir, Mohammed Rafiq and Mahmood, Nasrul Humaimi and Iqbal, Nida and Salim, Norita and Froemming, Gabriele R. A. and Balaji, H. R. and Tunku Kamarul, Tunku Kamarul (2013) Characterization, antibacterial and in vitro compatibility of zinc-silver doped hydroxyapatite nanoparticles prepared through microwave synthesis. Ceramics International, 40 (3). 4507–4513. ISSN 0272-8842

Abdul Rahiman, Fatimah and Mahmad, Noraini and Mat Taha, Rosna and Elias, Hashimah and Huyop, Fahrul Zaman (2013) Antimicrobial properties of Lawsonia inermis syn. Lawsonia alba in vivo and in vitro. Journal of Food, Agriculture and Environment, 11 (3-4). pp. 502-504. ISSN 1459-0255

Abdul Samad, Noraini and Sudirman, Rubita and Mahmood, Nasrul Humaimi and Yoong, Yee Yan (2013) Study of situation based environment towards noise reduction during ECG acquisition. Engineering, 5 (5B). pp. 6-9. ISSN 1947-3931

Al-Hamdani, Osamah and Chekima, Ali and Dargham, Jamal and Shaikh Salleh, Sheikh Hussain and Noman, Fuad and Hussain, Hadri and Arif, A. K. and Mohd. Noor, Alias (2013) Multimodal biometrics based on identification and varification system. Journal of Biometrics & Biostatistics, 4 (2). pp. 1-8. ISSN 2155-6180

Almatar, Manaf and Rahmat, Zaidah and Mohd. Salleh, Faezah (2013) Preliminary morphological and anatomical study of orthosiphon stamineus. Indian Journal of Pharmaceutical and Biological Research, 1 (4). pp. 1-6. ISSN 2320-9267

Ayob, Zahidah and Abd. Samad, Azman and Mohd. Bohari, Siti Pauliena (2013) Cytotoxicity activities in local justicia gendarussa crude extracts against human cancer cell lines. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 45-52. ISSN 0127-9696

Ayob, Zahidah and Wagiran, Alina and Abd Samad, Azman (2013) Potential of tissue cultured medicinal plants in Malaysia. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 111-117. ISSN E-ISSN 2180-3722

Bagherbaigi, Saeedeh and Gicana, Ronnie G. and Lamis, Robert J. and Nemati, Mahdieh and Huyop, Fahrul Zaman (2013) Characterisation of Arthrobacter sp. S1 that can degrade α and β-haloalkanoic acids isolated from contaminated soil. Annals of Microbiology, 63 (4). pp. 1363-1369. ISSN 1590-4261

Bajuri, Mohd. Nazri and Abdul Kadir, Mohammed Rafiq and Murali, Malliga Raman and Tunku Zainol Abidin, Tunku Kamarul Zaman (2013) Biomechanical analysis of the wrist arthroplasty in rheumatoid arthritis: a finite element analysis. Medical and Biological Engineering and Computing, 51 (1-2). pp. 175-186. ISSN 0140-0118

Bala Krishnan, Malarvili and Tan, Wei Kiat and Packrisamy, Megalla (2013) Development of screening tool to identify potential Implantable Cardiac Defibrillator (ICD) receiver. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2 (12). pp. 6390-6396. ISSN 2320-3765

Cheah, Tead Weng and Ismail, Ismanizan and Sidek, Nik Marzuki and Wagiran, Alina and Abdullah, Ruslan (2013) Biosynthesis of very long polyunsaturated omega-3 and omega-6 fatty acids in transgenic japonica rice (oryza sativa l). Australian Journal of Crop Science, 7 (9). pp. 1227-1234. ISSN 1835-2693

Elengoe, A. and Hamdan, Salehhuddin (2013) Heat sensitivity between human normal liver (WRL68) and breast cancer (MCF7) cell lines. Journal of Biotechnology Letters, 4 (1). pp. 45-50. ISSN 0976-7045

Elengoe, Asita and Hamdan, Salehhuddin (2013) Heat sensitivity between human normal liver (WRL-68) and breast cancer (MDA-MB 231) cell lines. International Journal of Chemical, Environmental & Biological Sciences, 1 (1). pp. 191-195. ISSN 2320-4087

Geok, Wei Leong and Sheau, Chen Lee and Cher, Chien Lau and Klappa, Peter and Shamsir, Mohd. Shahir (2013) Comparison of computational tools for protein-protein interaction (PPI) mapping and analysis. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 1-8. ISSN E–ISSN 2180–3722

Haidary, Sazan M. and Córcoles, Emma Paola and Ali, Nihad K. (2013) Folic acid delivery device based on porous silicon nanoparticles synthesized by electrochemical etching. International Journal of Electrochemical Science, 8 (7). pp. 9956-9966. ISSN 1452-3981

Hamdan, Salehhuddin and Elengoe, Asita (2013) Heat sensitivity between human normal liver (WRL68) and breast cancer (MDAMB 231) cell lines. International Journal of Chemical, Environmental & Biological Sciences, 1 (1). pp. 191-195. ISSN 2320-4087

Hamdan, Salehhuddin and Elengoe, Asita (2013) Heat sensitivity between human normal liver (WRL68)l(MCF7) cell lines. Journal of Biotechnology Letters, 4 (1). pp. 45-50. ISSN 0976-7045

Hamedi, Mahyar and Shaikh Salleh, Shaikh Hussain and Astaraki, Mehdi R. and Mohd. Noor, Alias (2013) Emg-based facial gesture recognition through versatile elliptic basis function neural network. Biomedical Engineering Online, 12 (1). ISSN 1475-925X

Huyop, Fahrul Zaman and Mienda, Bashir Sajo (2013) Characterization of bacillus cereus BM1 with protease activity. Research in Biotechnology, 4 (3). 07-19. ISSN 2229-791X

Illyas Ahmad, Fauziah and Johan, Nur Shafiqoh and Wagiran, Alina (2013) Effect of 2,4-d on embryogenic callus induction of Malaysian indica rice (oryza sativa l) cultivars mr123 and mr127. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 75-78. ISSN 0127-9696

Iqbal, Nida and Abdul Kadir, Mohammed Rafiq and Nik Malek, Nik Ahmad Nazim and Mahmood, Nasrul Humaimi and Murali, Malliga Raman and Tunku Zainol Abidin, Tunku Kamarul Zaman (2013) Characterization and antibacterial properties of stable silver substituted hydroxyapatite nanoparticles synthesized through surfactant assisted microwave process. Materials Research Bulletin, 48 (9). pp. 3172-3177. ISSN 0025-5408

Jaganathan, Saravana Kumar and Supriyanto, Eko and Mandal, Mahitosh (2013) Events associated with apoptotic effect of p -Coumaric acid in HCT-15 colon cancer cells. World Journal of Gastroenterology, 19 (43). pp. 7726-7734. ISSN 1007-9327

Jamalnasir, Hidayah and Wagiran, Alina and Shaharuddin, Noor Azmi and Abd. Samad, Azman (2013) Isolation of high quality RNA from plant rich in flavonoids, Melastoma decemfidum Roxb ex. Jack. Australian Journal of Crop Science, 7 (7). pp. 911-916. ISSN 1835-2693

Javed, Muhammad Arshad and Huyop, Fahrul Zaman and Ishii, Takashige and Abd. Samad, Azman and Mahmood, Tariq and Haider, Muhammad Saleem and Saleem, Muhammad (2013) Construction of microsatellite linkage map and detection of segregation distortion in indica rice (oryza sativa l.). Pakistan Journal of Botany, 45 (6). pp. 2085-2092. ISSN 0556-3321

Kahar, Ummirul Mukminin and Chan, Kok Gan and Md. Salleh, Madihah and Hii, Siew Mee and Goh, Kian Mau (2013) A high molecular-mass anoxybacillus sp sk3-4 amylopullulanase: characterization and its relationship in carbohydrate utilization. International Journal of Molecular Sciences, 14 (6). pp. 11302-11318. ISSN 1661-6596

Kamarulafizam, I. and Salleh, Sh-Hussain and Harris, Arief A. and Yusoff, K. and Hamedi, M. and Jamil, A. A. (2013) Heart sound feature representation using extended modified b-distribution. Transactions of Japanese Society for Medical and Biological Engineering, 51 . R-204. ISSN 1881-4379

Kaya, Yilmaz and Yilmaz, Sibel and Gozukirmizi, Nermin and Huyop, Fahrul Zaman (2013) Evaluation of transgenic nicotiana tabacum with deHe gene using transposon based IRAP markers. American Journal of Plant Sciences, 4 (8A). pp. 41-44. ISSN 2158-2742

Kazemi, Mohsen and Imarah, Nur Ilham and M. B., Malarvili (2013) Assessment on methods used to detect asthmatic and non-ashmatic conditions using capnogram signal. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 77-84. ISSN E-ISSN 2180-3722

Krishnan, Malarvili Bala and Mou Yusop, Nur Ilham Imarah (2013) Design of asthmatic severity monitoring tool. International Journal of Advanced Research in Electrical Electronics and Instrumentation Engineering, 2 (12). pp. 5800-5809. ISSN 2320-3765

Mahmood, Nasrul Humaimi and Che Harun, Fauzan Khairi (2013) Automated platelet counter based on the modified hough transform. Journal of Medical Imaging and Health Informatics, 3 (4). pp. 543-546. ISSN 2156-7018

Mahmood, Nasrul Humaimi and Che Harun, Fauzan Khairi (2013) Infrared sensor rig in detecting various object shapes. International Journal of Advance research in Electrical, Electronics and Instrumentation Engineering, 2 (10). pp. 4726-4732. ISSN 2278-8875

Mahmood, Nasrul Humaimi and Lee, Chen Hsieng and Daud, Siti Asmah (2013) Development of biomedical image processing software package for new learners. Jurnal Teknologi (Sciences and Engineering), 61 (2 SUPP). pp. 71-77. ISSN 0127-9696

Maya Sarah, Maya Sarah and Taib, Mohd. Rozainee (2013) Microwave sterilization of oil palm fruits: effect of power, temperature and d-value on oil quality. Journal of Medical and Bioengineering, 2 (3). pp. 153-156. ISSN 2301-3796

Mohamad Salim, M. I. and Supriyanto, E. and Haueisen, J. and Ariffin, I. and Ahmad, A. H. and Rosidi, B. (2013) Measurement of bioelectric and acoustic profile of breast tissue using hybrid magnetoacoustic method for cancer detection. Medical and Biological Engineering and Computing, 51 (4). pp. 1-8. ISSN 0140-0118

Mohamed Yusof, Nor Ashikin (2013) Malaysia as biotechnology producer: characters of local biotechnology industry. Global Journal for Research Analysis, 2 (9). pp. 8-9. ISSN 2277-8160

Mohamed Zulkifli, Razauden and Yahya, Azli and Arif, Muhammad and Andromeda, Trias and Ahmad, Nor Azlina and Abdul Kadir, Mohammed Rafiq and Baharom, Ameruddin (2013) Development of gel electrophoresis unit to reduce DNA separation process time—a proof of concept. Journal of Bionanoscience, 7 (2). pp. 210-214. ISSN 1557-7910

Mohd. Adib, Mohd. Azrul Hisham and Nor Tuah, Norashikin and Mohd Hasni, Nur Hazreen and Osman, Kahar (2013) Prediction of blood pattern into S-Shaped model of artery during normal blood pressure. Journal of Mechanical Engineering and Sciences, 4 (n/a). pp. 496-503. ISSN 2231-8380

Mohd. Bahari, Zaratulnur and Ali Hamood Altowayti, Wahid and Ibrahim, Zaharah and Jaafar, Jafariah and Shahir, Shafinaz (2013) Biosorption of as (iii) by non-living biomass of an arsenic-hypertolerant Bacillus cereus strain SZ2 isolated from a gold mining environment: equilibrium and kinetic study. Applied Biochemistry and Biotechnology, 171 (8). pp. 2247-2261. ISSN 0273-2289

Mohd. Sobani, Siti Syazalina and Daud, Siti Asmah and Mahmood, Nasrul Humaimi (2013) Preliminary study of multiview imaging for accurate 3D reconstruction using structured light scanner. International Journal of Research in Engineering and Technology (IJRET), 2 (10). pp. 235-238. ISSN 2319-1163

Mohd. Talkah, Shakina and Zulkiflee, Iylia and Omar, Mohd. Shahir Shamsir (2013) Development and deployment of an ethnobotanical and phytochemical knowledge database of Malaysia. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 79-84. ISSN 0127-9696

Muniandy, Kavitha and Kahar, Ummirul Mukminin and Chong, Chun Shiong and Chai, Yen Yen and Goh, Poh Hong and Goh, Kian Mau (2013) Application of statistical experimental design for optimization of novel α-amylase production by anoxybacillus species. Journal of Biological Sciences, 13 (7). pp. 605-613. ISSN 1727-3048

Roozbahani, Fatemeh and Sultana, Naznin and Ismail, Ahmad Fauzi and Nouparvar, Hamed (2013) Effects of chitosan alkali pretreatment on the preparation of electrospun PCL/chitosan blend nanofibrous scaffolds for tissue engineering application. Journal of Nanomaterials . ISSN 1687-4110

Siddall, Hilary K. and Yellon, Derek M. and Ong, Sang Bing and Mukherjee, Uma A. and Burke, Niall and Hall, Andrew R. and Angelova, Plamena R. and Ludtmann, Marthe H. R. and Deas, Emma and Davidson, Sean M. and Mocanu, Mihaela M. and Hausenloy, Derek J. (2013) Loss of PINK1 increases the heart's vulnerability to ischemia-reperfusion injury. Plos One, 8 (4). ISSN 1932-6203

Sukmana, Irza (2013) Tube-like structure development and angiogenesis assessment of Human Umbilical Vein Endothelial Cells (HUVECS) in a three-dimensional system. International Journal on Biochemical, Pharmaceutical Sciences and Chemical Engineering, n/f (n/f). pp. 228-231. ISSN n/f

Sultana, Naznin and Khan, Tareef Hayat (2013) Water absorption and diffusion characteristics of Nano Hydroxyapatite (nHA) and Poly (hydroxybutyrate-co-hydroxyvale (PHBV)-Based Composite Tissue Engineering Scaffolds and Non-porous Thin Films. Journal of Nanomaterials, 2013 (n/a). pp. 1-8. ISSN 2090-4304

Sultana, Naznin and Khan, Tareef Hayat and Abdul Rahim, Ruzairi (2013) Design and construction of an underwater robot based fuzzy logic controller. International Review of Mechanical Engineering (IREME), 7 (1). pp. 147-153. ISSN 1970-8734

Syazwan, Aizat Ismail and Hafizan, Juahir and Baharudin, Mohd. Rafee and Fattah Azman, Ahmad Zaid and Izwyn, Zulkapri and Zulfadhli, Ismail and Syahidatussyakirah, Katis (2013) Gender, airborne chemical monitoring, and physical work environment are related to indoor air symptoms among nonindustrial workers in the Klang Valley, Malaysia. Therapeutics and Clinical Risk Management, 9 . ISSN 1176-6336

Z., Nur Zaida and Piakong, M. T. and Ibrahim, Zaharah (2013) Potential of P.Stratiotes and E.Crassipes in removing Pb as single or mixed metals from simulated wastewater. International Journal of Chemical and Environmental Engineering, 4 (4). p. 228. ISSN 2078-0737

Zakaria, Zulkarnay and Mansor, Muhammad Saiful Badri and Abdul Rahim, Ruzairi and Balkhis, Ibrahim and Fazalul Rahiman, Mohd. Hafiz and Abdul Rahim, Herlina and Yaacob, Sazali (2013) Magnetic induction tomography: a review on the potential application in agricultural industry of Malaysia. Journal of Agricultural Science, 5 (9). pp. 78-82. ISSN 1916-9752

Book Section

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Biomechanical properties and behaviours of the wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 13-24. ISBN 9783642319051

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Computational biomechanics of the wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag. ISBN 978-364231905-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Finite element analysis of the wrist arthroplasty in rheumatoid arthritis. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 59-69. ISBN 978-364231905-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Finite element analysis of the wrist joint affected by rheumatoid arthritis. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 41-58. ISBN 978-364231905-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) The wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-12. ISBN 978-364231905-1

Hum, Y. C. (2013) Conclusion and future works. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 127-129. ISBN 978-981445165-9

Hum, Y. C. (2013) Design and implementation. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 47-98. ISBN 978-981445165-9

Hum, Y. C. (2013) Result and discussion. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 99-126. ISBN 978-981445165-9

Ishak, M. I. and Abdul Kadir, M. R. (2013) Biomechanical considerations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 27-36. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Biomechanics in dentistry: evaluation of different surgical approaches to treat atrophic maxilla patients. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Bone and prosthetic component responses in various occlusal loading directions. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 67-86. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Bone and prosthetic component responses in various occlusal loading locations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 53-66. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Treatment options for severely atrophic maxillae. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 9-26. ISBN 978-364232602-8

Lai, K. W. and Supriyanto, E. (2013) Clinical tests and measurements. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 95-108. ISBN 978-9-81-402195-1

Lai, K. W. and Supriyanto, E. (2013) Designs and implementation of three dimensional nuchal translucency. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 47-94. ISBN 978-981402195-1

Lai, K. W. and Supriyanto, E. (2013) Future improvements. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 109-111. ISBN 978-981402195-1

Lai, K. W. and Supriyanto, E. (2013) Medicine and engineering related researches on the utility of two dimensional nuchal translucency. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 11-45. ISBN 978-981402195-1

Sultana, N. (2013) Biodegradable PHBV polymer-based scaffolds for bone tissue engineering. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 43-60.

Sultana, N. (2013) Fabrication techniques and properties of scaffolds. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 19-42. ISBN 978-364234801-3

Sultana, N. (2013) Scaffolds for tissue engineering. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-17. ISBN 978-364234801-3

Conference or Workshop Item

Abd. Latif, Mohd. Juzaila and Ismail, Noor Rizan Adzwa and Ramlan, Roszaidi and Mahmud, Jamaluddin and Abdul Kadir, Mohammed Rafiq (2013) Sensitivity study of surface curvature in characterisation of cartilage mechanical properties. In: Applied Mechanics And Materials.

Araújo, Manuel António and Merkel, Markus and Riegel, Harald and Öchsner, Andreas (2013) On the numerical simulation of laser beam cutting of hollow sphere structures. In: Materialwissenschaft Und Werkstofftechnik.

Azaman, Aizreena and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2013) Electromagnetic flux modeling of AC field over planar microarray dot electrodes used in dielectrophoretic lab-on-chip device. In: IFMBE Proceedings.

Azaman, Aizreena and Yamamoto, Shin-Ichiroh (2013) Ankle joint stiffness and damping pattern under different frequency of translation perturbation. In: Applied Mechanics And Materials.

Che Harun, Fauzan Khairi and Abdalla Sabeel, Thowiba Mohamed and Stephan, Enyinnaya Eluwa and Abdalla Sabeel, Solima Mohamed (2013) Detection of volatile compounds in urine using an electronic nose instrument. In: Proceedings - 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013.

Cupu, D. R. P. and Bahari, A. and Osman, K. and Md. Sheriff, J. (2013) Numerical analysis of elastohydrodynamic lubrication with non newtonian lubricant. In: Applied Mechanics And Materials.

Davoudi, Mohammad Mahd and Öchsner, Andreas (2013) On the accuracy of finite difference schemes for beam problems in the elastic range. In: Materialwissenschaft und Werkstofftechnik.

Ghazi, N. A. and Malek, N. A. N. N. and Hamdan, S. (2013) Cytostatic activity of clinoptilolite against human cervical cancer cell lines using three different media-sterilization techniques. In: Advanced Materials Research.

Hermawan, Hendra and Mantovani, D. (2013) Susceptibility to stress corrosion cracking of fe-35mn alloy under a pseudo-physiological condition. In: Applied Mechanics And Materials.

Iqbal, N. and Kadir, M. R. A. and Mahmood, N. H. B. and Moses, M. and Salim, M. B. M. and Malek, N. A. N. N. (2013) Effect of silver ions on the structural and antibacterial properties of bone replacement material. In: Advanced Materials Research.

Ishak, Muhammad Farhan and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah and Abdul Rahman, Shaifuzain (2013) The effect of cannulated screw placement angle in the management of femoral neck fracture. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Jeong, Jin Soo (2013) Minimum phase whitening filter to speech beamforming technique. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Madanian, Latifehossadat and Syed Mansor, Syed Mohamed Shafeq and Omar, Abdul Hafidz (2013) Marital satisfaction of Iranian female students in Malaysia: a qualitative study. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Mahmud, Nazriah and Yahya, Azli and Abdul Kadir, Mohammed Rafiq and Andromeda, Trias and Hashim, Nor Liyana Safura (2013) Modeling of flyback converter for micro machining biomedical component. In: Applied Mechanics and Materials 284-287.

Malek, N. A. N. N. and Ishak, S. A. and Kadir, M. R. A. (2013) Antibacterial activity of copper and CTAB modified clays against pseudomonas aeruginosa. In: Advanced Materials Research.

Muttakin, Imamul and Supriyanto, Eko (2013) Medical ultrasound power measurement system using PVDF sensor and FPGA technology. In: IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2013, 6th-9th May 2013, Minneapolis, MN, USA.

Nik Malek, Nik Ahmad Nizam (2013) Effects of natural zeolite (CLINOPTILOLITE) with urea on growth of amaranthus gangeticus, clinachantus nutans and capsicum annuum. In: 4th International Conference and Workshops on Basic and Applied Sciences (4th ICOWOBAS) and Regional annual Fundamental Science Symposium 2013 (11th RAFSS), Johor Bahru, Malaysia, 3-5 September 2013.

Nordin, J. A. and Nasution, A. K. and Hermawan, H. (2013) Can the current stent manufacturing process be used for making metallic biodegradable stents. In: Advanced Materials Research.

Othman, N. Z. and Wei, Chang, H. and Then, C. and Abd. Malek, R. and Sarmidi, Mohamad Roji and Aziz, Ramlan and Wan Mustapha, W. A. and Ali El-Enshasy, Hesham Ali Metwally Ali El-Enshasy (2013) Bioprocess development for high cell density cultivation of Rhizobium trifolii in semi-industrial scale stirred tank bioreactor. In: 2013 AIChE Annual Meeting, 3-8 Nov, 2013, San Francisco, CA.

Ramlee, Muhammad Hanif Anif and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah (2013) Three-dimensional modelling and finite element analysis of an ankle external fixator. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Riegel, Harald and Fruhstuck, J and Merkel, Markus and Winkler, Rolf G and Öchsner, Andreas (2013) On the laser beam cutting of metallic hollow sphere structures. In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications II; San Francisco, CA; United States, 5 - 7 February 2013, San Francisco, CA; United States.

Samdin, S. Balqis and Ting, Chee-Ming and Salleh, Sh-Hussain and Ariff, A.K. and Noor, A. B. Mohd (2013) Linear dynamic models for classification of single-trial EEG. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC), JUL 03-07, 2013, Osaka, Japan.

Sukmana, Irza and Djuansjah, J.R.P. (2013) Sandwiched polymer fibre in fibrin in matrices for the dictation of endothelial cells undergoing angiogenesis. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013), 24 January 2013 - 25 January 2013, Jakarta; Indonesia.

Suleiman Ahmad, Muhammad Jabir and Abdullah, Ahmad Nizam and Ibrahim, Rosdi and Mohamad, Mazlan and Abu Kasim, Noorhayaty and Abdul Kadir, Mohammed Rafiq and Muhamad, Shamsul and Itoh, Yoshinori and Hanada, Kotaro and Shimizu, Toru (2013) Effect of sintering conditions on mechanical properties and microstructure of titanium alloy produced by metal injection moulding (MIM). In: Advanced Materials Research.

Taib, I. and Osman, K. and Hermawan, H. and Abd. Kadir, M. R. (2013) Preliminary study on the comparable flow pattern between stented and non-stented aneurysm at hypertension condition. In: Applied Mechanics And Materials.

Ting, Chee-Ming and King, Simon and Salleh, Sh-Hussain and Ariff, A. K. (2013) Discriminative tandem features for hmm-based EEG classification. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC).

Ubaidullah, S. and Osman, K. (2013) Natural convection in a differentially heated cavity using splitting method. In: Applied Mechanics And Materials.

Yusop, A. H. and Hermawan, Hendra (2013) Synthesis and development of polymers-infiltrated porous iron for temporary medical implants: a preliminary result. In: Green Technologies For Sustainable & Innovation In Materials.

Thesis

Rizan, Nastaran (2013) Screen a dehalogenase gene using isolated bacterium from sea-shore soil of caspian sea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Wan Mahmud, Wan Mahani Hafiza (2013) Kidney abnormality detection and classification using ultrasound vector graphic image analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abd. Ghani, Amsal (2013) Lignin biodegradation by thermomyces lanuginosus EFB2 and aspergillus flavus EFB4 co-culture and pure culture in solid state fermentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdul Wahab Baqr, Rebaz (2013) Studies to investigate the effects of nitrogen sources on androgenesis and carbon sources on shoot regeneration of aroma and non-aromatic types in indica rice (Oryza Sativa L). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdullah, Ladei Yaseen (2013) Identification of locally isolated reactive black 5 decolorizing bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdullah, Rabi Atun Adawiah (2013) Designing primer for rapid detection of polluted river water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Kamal, Qistina (2013) Production of itaconic acid from palm oil mill effluent (POME) using Aspergillus Terreus nrrl 1960 immobilized in PVA-alginate sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Nasir, Nor Atikah Husna (2013) Immobilisation of phanerochaete chrysosporium in PVA-Alginate-sulphate beads for decolourization of textile effluents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Ali Deba, Abdulkarim (2013) Production of biodiesel from waste cooking oil by immobilized lipase in pva-alginate-sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ali Zangana, Salar Kadhum (2013) Isolation and identification of A3 -chloropropionic acid (3CP) degrading Aspergillus Aculeatus strain MBS 179. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alzeini, Khaled W. K. (2013) Expression of ron tyrosin kinase receptor on breast cancer cell lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Amirmaafi, Sara (2013) Effect of continuous therapeutic ultrasound on breast cancer cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Aogbosiomwan, Omoregbee (2013) Utilization of yeast metabolites for bioattraction of cockroach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Arabshahi, Zohreh (2013) High-cycle fatigue behavior of temporomandibular joint implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ari, Zainab (2013) Degradation of remazol black B by bacillus cereus strain A from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Baba, Sayang (2013) Engineered CHO cell line with coxsackie and adenovirus gene enhance the susceptibility of adenovirus infection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Babadi, Arman Amani (2013) RNA extraction and amplification of chalcone synthase (CHS) gene from Justicia gendarussa Burm. F. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Bahram Barati (2013) Simulating mutational effects on thermal stability of cellubiohydrolys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Chandera Seker, Darshini (2013) Optimization of glucose production from liquid pineapple waste using immobilized invertase in PVA- alginate-sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Chong, Hang Chiet (2013) Nutritional characteristics evaluation of Malaysian commercial pineapple cultivars. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Eshrati, Seyedeh Maryam (2013) Extraction and purification of potential pili from acinetobacter SP: strain B4 isolated from tapai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Esmaili, Rita (2013) Bioinformatics analysis of the structural and biochemical effect of the chemical weapon mustard gas on the P53 protein and cell death. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Farghadani, Reyhaneh (2013) Polymorphism study of the mitochondrial cytochrome b gene in the Malay population. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Farimani, Ali Yektaye (2013) Characterization of sugarcane bagasse from different pretreatment methods by ftir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

G. Alatiyah, Muna I. Hadi (2013) Genetic comparison of different human population groups using internal transcribed spacer sequence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Galadima, Ahmed Ibrahim (2013) Optimization of biobutanol production by clostridium species upm-a1 with liquid central composite design (ccd). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ghanbarian, Maryam (2013) Isolation and characterization of hydrogen producing bacteria from palm oil mill effluent (POME). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Goonasakaran, Sathisha (2013) Preliminary antimicrobial and phytochemical analysis of clinacanthus nutans and azadirachta indica. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Hadi, Ahmad Maki (2013) Isolation and biodegradation of 3-chloropropionic acid by aspergillus aculeatinus strain M1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hamad Ameen, Hazhar Muhammad (2013) Studies to investigate the effect of plant growth regulators, carbon sources and media modification on in Vutro seed germination and callogenesis in tomato. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hamdan, Norfadilah (2013) Chloroplast DNA diversification of Malaysian Pineapple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hii, Siew Mee (2013) Sequence analysis of starch degrading enzymes from anoxybacillus species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hong, Li Lian (2013) Screening and characterization of thermophiles from Malacca hot spring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Hum, Yan Chai (2013) Novel framework for automated hand bone segmentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ilan Sollan, Kogulabalan (2013) MCM-41 as support for immobilization of NAR-1 bacterial consortium in the biodegradation of remazol black B. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Kardi, Seyedeh Nazanin (2013) Biodegradation of remazol black b by bacterial consortium nar-2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Khorami, Hajar Hossein (2013) Preliminary study on porphyrin derivatives as transfection reagents for mammalian cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lai, Yew Seng (2013) Biotransformation of artonin E by locally isolated microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Lari, Alireza (2013) A study of mt-dna hypervariable region 1 (HVI) sequence polymorphism on residents of Johor in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lee, Sheau Chen (2013) Mining and mapping of protein-protein interaction associated with dementia and related diseases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Malaih, Mona Kiminezhad (2013) Isolation of potential dehalogenase marine bacteria that can degrade 2.2-Dichloropropionate (2.2DCP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Md. Lazim, Nurul Asmak (2013) Decolorization of palm oil mill effluent using selected indigenous bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohajer, Faeze Sadat (2013) Structural analysis and modeling comparison of primates dystrophin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohamad rosdi, Mohamad Norisham (2013) Artocarpus lowii king compounds effect on anti-inflammatory enzyme pathways endothelial nitric oxide productionin respose to homocysteine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohammed, Bakhtiyar Ahmed (2013) Azo dyes decolorization by bacteria originated from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohammed Hadeed, Hatem (2013) Isolation and characterization of putative burkholderia sp. HY1 from mud that able to degrade 2, 2-dichloropropionate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohamoud Adow, Mohamed (2013) Investigation regarding the effectiveness of nitrogen sources and concentration on plant characteristics in tomato (Lycopersicon Esculentum). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Arif, Shahkila (2013) Molecular phylogeny of selected mango cultivars based on internal transcribed spacer (ITS) region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Nazir, Nurain (2013) Biodecolourisation of palm oil mill effluent (POME) by selected exogenous bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Talkah, Nurul Shakina (2013) Web-based ethnobotanical database system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Yusof, Ab. Aziz (2013) The effect of geometry on the micromechanical behaviour of campaniform sensillum biomimetic structure as strain sensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mojaveryazdi, Farzaneh Sabbagh (2013) Production of polyhydroxyalkanate (PHA) from waste cooking oil using pseudomonas oleovorans. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mustafa, Abubakar Sadik (2013) Clonning and characterization of alfa-globulin promoter into an expression vector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Najafi, Marjan (2013) The effects of medium modification on in vitro seed germination and callus induction in tomato. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nastaran Rizan (2013) Screen a dehalogenase gene using isolated bacterium from sea-shore of caspian sea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Nazanin Sheykhandalibi (2013) Simulating interaction of tuberculosis antigen 85B protein with hydrophobic surface graphene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Noor Azmy, Suzanna (2013) Automatic bat counting and identification of bat species using terrestrial laser scanning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Norouzi, Azimeh (2013) Optimization of Flavonol Synthase (FLS) gene amplification from Melastoma decemfidum via PCR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nur Asilah Abdul Razak (2013) Antimicrobial activity of locally isolate bacteria from fruit skins (Mango and Papaya). Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Olya, Mohammad Emad (2013) Protein engineering of alpha-amylase from anoxbacillus sp, SK3-4 with saturation mutagenesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Omer, Kosar Ali (2013) Survival of human prostate carcinoma cell line (DU145) in the presence of Ficus Deltoidea and Labisia Pumila aqueouus extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Omuwa, Audu Jemilatu (2013) Investigation of biohydrogen producing bacteria isolated from three different bovine manures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Pachelles, Samson (2013) Expression and biochemical characterization of maltogenic amylase from bacillus lehensis G1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Pourmehdi, Shadi (2013) Screen a dehalogenase gene using isolated bacterium from lagoon soil from North of Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Samghabadi, Asal Saf (2013) Investigating the mutations and structure of short part of collagen type I in osteogenesis imperfecta type III. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Sanati, Parisa (2013) Effect of silver-based products on simulated body fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sheykhandalibi, Nazanin (2013) Simulatting interaction of tuberculosis antigen 85B protein with hydrophobic surface graphene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Thevarajoo, Suganthi (2013) Isolation and characterization of bacteria from the skins of guava and apple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Wong, Wen Yong (2013) Isolation, identification and characterization of 2,2-dichloropropionic acid utilizing bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Yaakop, Amira Suriaty (2013) Modification of media formulation for enhancing production of extracellular polysaccharides by porphyridium cruentum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Yousefi, Pedram (2013) A study of cytochrome C oxidase subunit 1 polymorphism in Malay population. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zakaria, Nursyahda (2013) Anti inflammatory and anti oxidant properties of purified stilbene and crude extracts of Perlis vitis vinifera on cultured huvecs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.