Items where Year is 2003

Article

Abd. Rahman, Roslan and Zubair, Mazlan and Amin, Norsham (2003) Finite element modeling, correlation and model updating of stiffened plate. Jurnal Mekanikal (16). pp. 91-106. ISSN 0127-3396

Abdul Rahim, Abd. Rahman and Nabi Baksh, Mohd. Shariff (2003) Case study method for new product development in engineer to order organisations. Work Study, 52 (1). pp. 25-36. ISSN 0043-8022

Abdul Talib, Hayati and Jamaludin, Khairur Rijal (2003) Aplikasi teknologi maklumat (IT) dalam pengurusan organisasi : sorotan kajian. Jurnal teknikal dan kajian sosial, 1 (2). pp. 89-105. ISSN 1675-2228

Abu Bakar, A R. and Ouyang, H and Cao, Q (2003) Interface pressure distributions through structural modifications. SAE 2003 Transactions, Journal of Passenger Cars: Mechanical Systems , Vol. 1 (No. 6). pp. 2387-2392.

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2003) Pengaruh nombor pusar ke atas pengurangan emisi NOx dari pembakar berbahan api cecair menggunakan pemusar udara aliran paksi. Jurnal Mekanikal (16). pp. 79-90. ISSN 0127-3396

Aqida, S. N. and Ghazali, M. I. and Hashim, J. (2003) The effects of stirring speed and reinforcement particles on porosity formation in cast MMC. Jurnal Mekanikal (16). pp. 22-30. ISSN 0127-3396

Ayob, Amran (2003) Stress analysis of piping elbows using FEM. The Journal of the Institution of Engineers, Malaysia (IEM), 64 (3). pp. 13-19. ISSN 012-513X

Azmi, Azwan Iskandar and Mohd. Taib, Jamaludin and Muhammad, Zulkepli (2003) Feature extraction from step AP224 file sets. Jurnal Mekanikal (16). pp. 31-46. ISSN 0127-3396

Hassan, Mohamad Zaki and Darus, Amer Nordin (2003) A thermoeconomic analysis for home air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 48-56. ISSN 1675-2228

Idris, Jamaliah and Salim, Farid and Suliman, Zahrulail and Osman, Edynoor (2003) Kajian sifat kehausan dan kekerasan komposit matriks aluminium. Jurnal Teknologi A (38A). pp. 11-24. ISSN 0127-9696

Mailah, Musa and Low, Hook Jong (2003) Intelligent active force control of a three-link manipulator using fuzzy logic. Jurnal Mekanikal (16). pp. 57-78. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamed Shukri (2003) Mengkaji keberkesanan aplikasi pemusar udara ram bilah rata dalam mengurangkan emisi dari pembakar berbahan api cecair. Jurnal Teknologi F (39F). pp. 11-22. ISSN 0127-9696

Mohd. Jaafar, Mohamad Nazri and Sulian, Mohd. Sharul (2003) Kajian keberkesanan kaedah pembakaran udara berperingkat ke atas pembakar berbahan api gas. Jurnal Mekanikal (15). pp. 86-96. ISSN 0127-3396

Muhamad, Pauziah and Darus, Amer Nordin (2003) An exergy analysis of an air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 34-47. ISSN 1675-2228

Omar, Zamri and Mailah, Musa (2003) A preliminary study into the application of active force control strategy to an automotive suspension system. Jurnal Mekanikal (15). pp. 42-57. ISSN 0127-3396

Quek, Eng Eng and Mohd. Yusof, Sha'ri (2003) A survey of TQM practices in the Malaysian electrical and electronic industry. Total Quality Management, 14 (1). pp. 63-77. ISSN 1478-3363

Sheikh Salim, Sheikh Ahmad Zaki and Wan Hassan, Mat Nawi (2003) Simulasi aerodinamik kenderaan dengan menggunakan fluent. Jurnal teknikal dan kajian sosial, 1 (2). pp. 9-33. ISSN 1675-2228

Tan, Jaan Soon and Ani, Farid Nasir (2003) Diffusional behavior and adsorption capacity of palm shell chars for oxygen and nitrogen—the effect of carbonization temperature. Carbon, 41 (4). pp. 840-842. ISSN 00086223

Tawi, Kamarul Baharin and Yunus, Rohaizad and Talib@Charlie, Mohamad Husni (2003) Valve train investigation for CNG engine application. Jurnal Mekanikal, 15 . pp. 32-41. ISSN 0127-3396

Venkatesh, Vasisht, C. (2003) Precision manufacture of spherical and aspheric surfaces on plastics, glass, silicon and germanium. Current Sciences, 84 (9). pp. 1211-1219.

Venkatesh, V. C. and Izman, S. and Sharif, S. and Mon, T. T. and Konneh, K. (2003) Ductile Streaks in Precision Grinding of Hard and Brittle Materials. Academy Proceedings in Engineering Sciences, 28 (5). pp. 915-924. ISSN none

Wan Nik, Wan Sani and Ani, Farid Nasir and Hassan, Masjuki (2003) Rheological properties of palm oil and palm-mineral oil blend. Jurnal Mekanikal (16). pp. 107-116. ISSN 0127-3396

Yeak, Su Hoe and Maimun, Adi (2003) Source distribution method and hydrodynamics coefficients of vessel. Jurnal Mekanikal, 15 . pp. 72-85. ISSN 0127-3396

Monograph

Dahalan, Md. Nizam and Mohd Jaafar, Mohd Nazri and Wan Ali, Wan Khairuddin and Mamat, Rizalman and Abd. Ghani, Mohd Shaiful Azman (2003) Determining Potassium Nitrate performance as solid rocket propellant for rocket engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Daud, Mohd. Fadzil and Hanafiah, Khairul Anwar and Wan Hussin, Wan Nazdah (2003) Mechanical design and fabrication of a prototype motorized tricycle for the disable. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ismail, Yob Saed and Mohd. Sam, Abdul Rahman and Abu Hassan, Shukur (2003) The study of bonding behavior between fiber reinforced polymer composite plate and concrete prism under tropical climate. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Md. Tap, Masine (2003) Application of design for assembly (DFA) in small and medium industries (SMI). Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Md. Tap, Masine and Mohamed Shaharoun, Awaluddin and Wan Hussin, Wan Nazdah (2003) Determination of felxible measures in advanced manufacturing system and their effect in productivity and responsiveness. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Noor, Alias and Abu Bakar, Rosli and Rajoo, Srithar and Ali Sera, Mardani (2003) Design and development of pumps for power plant and cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Nusyirwan, Istas Fahrurrazi and Dahalan, Md. Nizam (2003) Using composite materials To fabrication UAV wing. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Rajoo, Srithar and Mohd. Noor, Alias and Abdul Aziz, Azhar (2003) Performance analysis of turbocharger effect on engine in local cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Hussin, Wan Nazdah and Daud, Mohd. Fadzil and Abdul Majid, Fadzilah Adibah (2003) Design, fabricate and testing of stationary magnetic stirrer bar for uniform mixing of cell culture. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

A. Khalil, Ehab and Khalid, Marzuki and Kekre, H. B. (2003) A switch node architecture for multimedia environment. In: IEEE TENCON '03, 2003.

Abd. Kader, Ab. Saman (2003) Freshwater management in relation to inland water transport activies. In: International Freshwater Management Conference And Exhibition, 2003, Kuching, Sarawak.

Hudha, Khisbullah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan (2003) Handling analysis of a passenger car based on simulation and experimental studies. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Mat Darus, Intan Zaurah and Tokhi, M. O. (2003) Direct neuro-AVC modelling and control strategy for vibration suppression of a flexible plate structure. In: The 9th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2003), 16 - 19 September 2003, Lisbon, Portugal.

Muhamad, Sallehuddin and Hamid, Khairul Azura (2003) A four-seat light airplane design. In: 10th Australian International Aerospace Congress incorporating the 14th National Space Engineering Symposium 2003, 29 July – 1 August 2003, Brisbane, Queensland, Australia.

Rozainee, M. and W. Ali, W. Khairuddin and G. Tan, K. and T. Wong, C. (2003) Comparison of sludge drying performance between microwave spouted bed and microwave fixed bed dryer. In: 17th Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Tanjung Bungah. Penang.

Rozainee, M. and W. Ali, W. Khairuddin and Tan, K. G. and Wong, C. T. (2003) Microwave spoted bed dryer for sludge waste. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

S. Kang, H. and Jalil, M. K. and Mailah, M. (2003) A robot interface using virtual reality technology. In: Engineering & Technology Conference, 2003, Crowne Plaza Riverside. Kuching, Sarawak.

S. Sharif, Rival (2003) Investigation on the effect of machining parameters in EDMing of titanium alloy. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Yaakob, Omar and Daman, Daut and Bade, Abdullah (2003) Full scale measurement of wave and vessel motions. In: Marine Technology, 2003, UTM, Skudai.

Zakaria, Khidzir and Shariff, Safian and Nabi Baksh, M. Shariff (2003) Development of pilot application. In: Workshop On Advanced Product Support Technologies Design, CAD/CAM, Rapid Prototyping And Virtual Manufacturing, 2003, UTM, Kuala Lumpur.

Book

Hashim, Jasmi (2003) Glosari kejuruteraan bahan. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0304-0

Hashim, Jasmi (2003) Glosari kejuruteraan bahan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0304–0

Hashim, Jasmi (2003) Pemprosesan bahan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0306–7

Hashim, Jasmi (2003) Pengenalan komposit matriks logam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0318–0

Musa, Hamidon (Penterjemah) and Che Ismail (Penterjemah), Che Abas (Penterjemah) (2003) Pembuatan tersepadu komputer: dari konsep menjadi kenyataan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0295–8

Rahmat, Mohd. Fua´ad and Ibrahim, Sallehuddin (2003) Instrumentasi. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0305–9

Thesis

Abdullah, Zulkeflee (2003) Analysis and improvement of the product and process design using DFA house methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Balakrishnan, Santhirakumar (2003) Performance of whisker reinforced ceramic insert during hard turning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Budi, Agus Setyo (2003) A study on the mechanical, electrical and vibrational spectroscopy behaviour of neodymium copper phosphate glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Choo, Hing Kok (2003) Aplication of a six sigma methodology in an automotive manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husain, Abdul Rashid (2003) Development of dental material testing equipment. Masters thesis, University of Newcastle Upon Tyne, United Kingdom, School of Mechanical and Systems Engineering.

Lee, Lai Kin (2003) Thermal analysis of a vertically based fin array in a bounded region : a numerical experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Meng Hee (2003) A laboratory and field study of industrial gas turbine blade faults diagnosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Loh, Sheau Ping (2003) Hydrodynamic coefficients of manoeuvring for small vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ma'aram, Azanizawati (2003) Quality assessment of hollow rapid prototyping model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Saad, Rozaimi (2003) Kajian pembentukan tegasan dan anjakan pada matalat pemotong disebabkan oleh parameter pemotong menggunakan kaedah unsur tak terhingga (FEA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusof, Noordin (2003) Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Muhaimin, Abdul Halim (2003) Development of an automotive suspension system using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Chuan Huat (2003) Sistem rekabentuk corak dan acuan pinggan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Eng Peng (2003) Numerical study of flow in a diverging rectangular channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Ying Keng (2003) Numerical simulation of air conditioned space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rakiman, Khairol Anuar (2003) The application of intelligent active force control of a robot manipulator in surface finishing processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samsudin, Abdul Rahim (2003) Product development using concurrent engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tai, Siew Fong (2003) Materials interaction during soldering and isothermal ageing of Sn-Pb and Sn-Ag-Cu solders on electroless Ni/Au surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Poh Lai (2003) Analyses of tool life and surface roughness during hard turning of AISI H13 hot work tool steel using mixed ceramic tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Kim Seng (2003) Time domain simulation approach for the safe design of small vessels. Masters thesis, Universiti Teknologi Malaysia, Department of Mechanical Engineering.

Yusof, Yusri (2003) Disassemblability evaluation method (DEM) for green product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.