Items where Year is 2002

Ab. Rahman, Rosdi (2002) Mengubahsuai pam omboh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Sa'ardin (2002) Numerical study of flow in an internally ribbed channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Bulan (2002) The study of noise reduction on rolling piston type rotary compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Syukur, Syaimak and Md. Tap, Masine (2002) Data transfer between Cad system and RP system: a report. Jurnal Teknologi A (37A). pp. 37-46. ISSN 0127-9696

Ahmad, Robiah and Jamaluddin, Hishamuddin (2002) Radial basis function (RBF) for non-linear dynamic system identification. Jurnal Teknologi A (36A). pp. 39-54. ISSN 0127-9696

Ahmad, R. and Jamaluddin, H. and Hussain, M. A. (2002) Multivariable system identification for dynamic discrete-time nonlinear system using genetic algorithm. In: IEEE International Conference on Systems, Man and Cybernetics, 6-9 Oct. 2002, Yasmine Hammamet, Tunisia.

Ani, Farid Nasir and Latiff, zukarnain and ariffin, Mohd. Kamal (2002) Termodinamik gunaan. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0246-X

Anis, Samsol Faizal (2002) Fault detection by experimental vibration analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Azwan Iskandar (2002) Study on implementation of step AP224 in process planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Daud, Ruslizam (2002) Development of an optical-based approach for the measurement of surface roughness and brightness in machining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Mohd. Imran (2002) Mekanik kejuruteraan : statik teori, contoh penyelesaian dan masalah jilid 1. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0254-0

Ghazali, Mohd. Imran and Abu Hassan, Shukur (2002) Mekanik kejuruteraan statik teori, contoh penyelesaian dan masalah jilid 2. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0255-9

Hamada, S. and Hamada, H. and Suzuki, H. and Tamin, M. N. and Nozue, A. (2002) Microstructure and environment-dependent fatigue crack propagation properties of Ti-48Al intermetallics. Journal of Materials Science, 37 . pp. 1107-1113. ISSN 0022-2461

Hamzah, E. and Prayitno, D. and Ghazali, M. Z. M. (2002) Effect of mould tilt angle on the mechanical properties of as-cast aluminum alloy. Materials & Design, 23 (2). pp. 189-194. ISSN 0261-3069

Harun, Muhammad Adli and Mohd. Rohani, Jafri and Wan Hamid, Wan Harun (2002) Ketepatan Kaedah Pengekosan Berasaskan Aktiviti (Abc) Berbanding Kaedah Pengekosan Tradisional Dalam Pengekosan Produk: Pemangkin Kepada Program 6-Sigma. Jurnal Teknologi A (37A). pp. 23-36. ISSN 0127-9696

Hashim, Ayob (2002) Pengurusan asap di dalam atrium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Adnan (2002) On-line recognition of developing control chart patterns. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Mohamad Zaki (2002) A thermoeconomic analysis for home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hayash, Jun’ichi and Horikawa, Toshihide and Takeda, Isao and Muroyama, Katsuhiko and Ani, Farid Nasir (2002) Preparing activated carbon from various nutshells by chemical activation with K2CO3. Carbon, 40 . pp. 2381-2386.

Huang, Fa Jyh (2002) Damage identification of model steel offshore platform using vector arma models. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Md. Zin (2002) Analisa spektrum kejutan terhadap papan gelugur sebagai bahan pengkusyenan pembungkus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jaaffar, Md. Razin (2002) Penilaian reka bentuk untuk pemasangan (DFA) Lucas-Hull untuk peralatan elektrik : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaludin, Khairur Rijal (2002) The application of ultrasound at high temperature. Jurnal teknikal dan kajian sosial, 2 (1). pp. 120-137. ISSN 1675-2228

Kamat, Seri Rahayu (2002) Kajian prestasi penapis hidraulik tekanan rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koh, Kho King (2002) Model-ship correlation study : a case study on Malaysian purse-seiner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Konneh, M. (2002) An experimental investigation on partial-ductile mode grinding of silicon. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Lajis, Mohd. Amri (2002) Study on machining parameters optimization in EDM of tungsten carbide using the Taguchi method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Kian Hong (2002) The disassembly sequences generation using the graph of connection precedence relationship (CPR-GRAPH). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Chuan Pei and Md. Tap, Masine (2002) Improving productivity through line balancing : a case study. Jurnal Mekanikal (14). pp. 48-62. ISSN 0127-3396

M. Salleh, Jamaliah (2002) Prestasi sedutan pam empar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa and Chong, Jonathan Wun Shiung (2002) Control of a robot arm using iterative learning algorithm with a stopping criterion. Jurnal Teknologi A (37A). pp. 55-72. ISSN 0127-9696

Mailah, Musa and Wong, Min Yee and Jamaluddin, Hishamuddin (2002) Intelligent active force control of a robotic arm using genetic algorithm. Jurnal Mekanikal (13). ISSN 0127-3396

Mamat, Rizalman (2002) Ciri-ciri propelan roket pepejal berasaskan kalium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Shuhaimi (2002) Analisis kestabilan statik membujur pesawat terbang ringan. Jurnal Mekanikal (13). pp. 26-45. ISSN 0127-3396

Mat Saman, Muhamad Zameri and Law, Cheak Ying (2002) Work Improvement At A Car Manufacturing Company. Jurnal Teknologi A (37A). pp. 73-87. ISSN 0127-9696

Md. Salleh, Salihatun (2002) Kajian getaran ke atas rasuk dan pengurangannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Sirat, Rozlina (2002) Development of a framework for implementing design for assembly (DFA) in small and medium sized industries (SMIs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Badrul Aisham (2002) Penilaian reka bentuk untuk pemasangan (DFA) Hitachi AEM untuk peralatan elektrik : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Yunus, Mohd. Radzi (2002) A study of swirled air method in the reduction of emissions from the combustion of liquid fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah (2002) Numerical Study Of Viscous Effects On Acoustic Waves. Jurnal Teknologi C (37A). pp. 47-54. ISSN 0127-9696

Mohd. Jaafar, Mohammad Nazri and Abdul Rahman, Mohd. Rosdzimin and Ishak, Mohamad Shaiful Ashrul and Appalanidu, Kiran Babu (2002) Pengaruh Penyelitan Plat Orifis Dalam Mengurangkan Emisi Dari Pembakar. Jurnal Teknologi F (37F). pp. 45-54. ISSN 0127-9696

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamad Shukri (2002) The influence of variable vane angle air swirler on reducing emissions from combustion process. Jurnal Mekanikal (14). pp. 1-9. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Ani, Farid Nasir and Mustapa, Azizi (2002) Kaedah pengurangan emisi dari pembakar lapisan tetap menggunakan udara tambahan/berperingkat. Jurnal Mekanikal (13). pp. 89-94. ISSN 0127-3396

Mohd. Lair, Noor Ajian (2002) Effectiveness of JIT implementation across a supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Taib, Jamaludin (2002) Feature research : review and future direction. Jurnal Mekanikal (13). pp. 1-10. ISSN 0127-3396

Mohd. Yusof, Sha'ri (2002) Total Quality Management (TQM) advancement and critical success factors for implementation in manufacturing Small and Medium Sized Enterprise (SMEs). Project Report. Universiti Teknologi Malaysia, Johor Bahru, Johor. (Unpublished)

Muhamad, Pauziah (2002) An exergetic analysis of a home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musa, Hamidon and Mat Saman, Muhamad Zameri and Hau, Lian Chuan (2002) Management and control of non-direct materials in an electronic company. Jurnal Mekanikal (13). pp. 95-116. ISSN 0127-3396

Musa, Md. Nor (2002) Design and development of rotating-sleeve refrigerant compressor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ngu, Ching Kui (2002) Performance of PCBN inserts and ceramic inserts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Amin Shah (2002) Environmentally conscious design for car air-conditioning compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Zamri (2002) Modelling and simulation of an active suspension system using active force control strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Nor' Azizi (2002) Kajian ciri-ciri getaran kayu golf. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pitowarno, Endra (2002) An implementation of a knowledge-based system method to an active force control robotic scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Prayitno, Dody (2002) Growth kinetics,microstructure and mechanical properties of aluminium - silicon bar produced by near net shape casting process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rafai, Noor Hakim (2002) Analysis of motion accuracy of 6-axis controlled welding robot using double ball bar method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahmad, Rohani (2002) Kajian pemantauan kegagalan mata alat menggunakan alat dinamometer daya pemotongan dan pancaran akustik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Redzuan, Norizah (2002) Micro drilling of electronic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salleh, Mohamed Najib (2002) A computer-aided garment pattern making. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sarip, Shamsul (2002) Prediction of air flow and comfort in large space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sheikh Salim, Sheikh Ahmad Zaki (2002) Determination of drag coefficient of a passenger car by computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soe, Soe Nu (2002) Theoretical analysis of design parameters of single stage absorption refrigeration system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Surjosatyo, Adi and Ani, Farid Nasir (2002) Development of a two-stage biomass combustion system for reducing the emission pollutant. Jurnal Teknologi C (36A). pp. 55-68. ISSN 0127-9696

Surjosatyo, Adi (2002) Development of a low-calorific value gas swirl burner incorporated with a two-stage biomass combustion system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thet, Thet Mon (2002) Chemical mechanical polishing of optical glass subjected to partial ductile grinding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Venkatesh, V. C. and Izman, S. and Sharif, S. and Mon, T. T. and Konneh, M. (2002) Precision micro-machining of silicon and glass. International Conference on Industrial Technology 2002, 2 . pp. 1146-1151.

Wan Ali, Wan Khairuddin (2002) Wideband microstrip antennas for cars and commercial vehicle modern communication system. Project Report. Faculty of Mechanical Engieering, Skudai, Johor. (Unpublished)

Wan Mohamed, Wan Ahmad Najmi and Ani, Farid Nasir (2002) The effect of fuel feed rate on temperature profiles of a cascading hearth with secondary swirl combustor. Jurnal Mekanikal (13). ISSN 0127-3396

Yaacob, M. S. and Jamaluddin, H. and Wong, K. C. (2002) Fuzzy logic approach for estimation of longitudinal aircraft parameters. Aeronautical Journal, 106 . pp. 585-594. ISSN 0001-9240

Yap, Yit Fatt (2002) Numerical study of a laminar flow along a curved converging rectangular duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.