Items where Year is 2000

Article

Aris, Azmi and Siang, H. P. and Tan, K. K. (2000) Treatment of food processing industrial effluent using coagulation and sequential batch reactor. Jurnal Kejuruteraan Awam, 12 (1). pp. 21-29. ISSN 0128-0147

Chik, Abdul Aziz and Ismail, Che Ros and Hainin, Mohd. Rosli (2000) Midblock signalled pedestrian crossing : alternative controller algorithms. Jurnal Kejuruteraan Awam, 12 (1). pp. 43-51. ISSN 0128-0147

Daulay, Hasan and Abd. Rahman, Norhan and Mohd. Nasir, Kamarul Azlan (2000) Aquifer simulation model in Tioman Island. Jurnal Kejuruteraan Awam, 12 (2). pp. 33-46. ISSN 0128-0147

Forth, J. P. and Brooks, J. J. and Tapsir, Siti Hamisah (2000) The effect of unit water absorption on long-term movements of masonry. Cement and concrete composites , 22 (4). pp. 273-280. ISSN 0958-9465

Hainin, Mohd. Rosli (2000) Evaluation of indicator tests for identification of segregation in flexible pavements : a case study. Jurnal Kejuruteraan Awam, 12 (2). pp. 1-12. ISSN 0128-0147

Ibrahim, Zulkepli and Richard, Hazel Kiddo (2000) Noise pollution at school environment located in residential area. Jurnal Kejuruteraan Awam, 12 (2). pp. 47-62. ISSN 0128-0147

Ismail, Mohammad and Siaw, Wai San (2000) Kesan kebakaran ke atas kekuatan mampatan konkrit. Jurnal Kejuruteraan Awam, 12 (2). pp. 13-32. ISSN 0128-0147

Kassim, Khairul Anuar and Chow, Shiao Huey (2000) Consolidation characteristics of lime stabilised soil. Jurnal Kejuruteraan Awam, 12 (1). pp. 31-42. ISSN 0128-0147

Kassim, Mohd. Azraai and Hanapi, Muhammad Nassir and Abdullah, Mohd. Harun (2000) A non-instrumental method to determine hydraulic heads on low-lying coastal aquifer. Jurnal Kejuruteraan Awam, 12 (1). pp. 1-8. ISSN 0128-0147

Mohamad Diah, Abu Bakar and Hamir, Rosli and Kamarulzaman, Kamarul Badlishah and Mohd. Ridzuan, Ahmad Ruslan (2000) Kesan pengawetan stim terhadap kekuatan konkrit. Jurnal Kejuruteraan Awam, 12 (2). pp. 63-70. ISSN 0128-0147

Osman, Mohd. Hanim and Md. Tahir, Mahmood and Saad, Sarifuddin (2000) Fatigue shear strength of slender web plate girders. Jurnal Kejuruteraan Awam, 12 (1). pp. 9-19. ISSN 0128-0147

Monograph

Abd. Rahman, Norhan and Mohd. Kassim, Amir Hashim (2000) Numerical modelling of multiphase flow, heat flow and pollutant transport in deforming porous media for subsurface systems. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Book

Hussin, Mohd. Warid (Penterjemah) and Zakaria, Fadhadli (Penterjemah) and Salleh, Othaman (Penterjemah) and Mohamad, Mohd. Sazali (Penterjemah) (2000) Rencam bersimen bertetulang gentian. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0183–8

Mohamed, Ab. Hamid (2000) Asas ukur kejuruteraan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0199–4

Thesis

Abu Bakar, Esa (2000) Pengurusan pasca-kontrak di Majlis Daerah Kota Tinggi (masalah dalam tempoh tanggungan kecacatan). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azahar (2000) Model statistik dalam strategi menender. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair (2000) Excusable delays in construction (A case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alham, Hishamuddin (2000) Development and verification of mathematical models for reinforced concrete encased wide-flanged steel columns exposed to fire. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Md. Imtiaj (2000) Study on the performance of modified oil palm shell (MOPAS) and commercial activated carbon (CAC) in phenol removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Mohd. Izat (2000) Pengurusan kelewatan baik pulih Tenaga Nasional Berhad : kajian kes di Pusat Pengurusan Bekalan, TNB Distribution Sdn. Bhd. Daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ang, May Ling (2000) The development of computer-aided system for quantitative assessment of deterioration effects in concrete bridges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Atan, Hasni @ Ihsan (2000) Flexural behaviour of trapezoid web plate girder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Haryati (2000) Uniaxial deformation of unfilled and filled joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Buang, Nor Aziah (2000) Zirconia based catalysts for environmental emission control : synthesis, characterisation, and catalytic activity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Hun Beng (2000) Fire-damaged structures, rebuilt or reinstate? - factors for decision : (a case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choon, Teck Kiang (2000) A comparison of bridge deck analysis techniques : grillage analysis and finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chow, Yeong Kang (2000) Treatment of rubber effluent by using ez-enzyme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chua, Poh Poo (2000) Pra cadangan merekabentuk dan membina sebuah loji rawatan air sisa domestik yang baru bagi menggantikan loji rawatan yang sedia ada untuk Bandar Baru Uda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daud, Zawawi (2000) Model kualiti air Sungai Semberong menggunakan perisian QUAL2E. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Den, Shu Chien (2000) Dense gas dispersion modelling for a proposed chlor-alkali facility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esam, Asrul Affandi (2000) Kajian kes : penilaian terhadap kos tidak wajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fachrul, Melati Ferianita (2000) Analisis aktiviti pembangunan ke atas kualiti air, logam berat dan perubahan komuniti bentik di perairan Teluk Jakarta, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fathi, Mohamad Syazli (2000) The behaviour of interlocking loadbearing concrete block wall subject to concentric loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Chee Kiong (2000) Project monitoring and control system : a case study at Robert Bosch Power Tools Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goentoro, Fredy Andereas (2000) The success of a potensial failure prediction model of landed property firms using multi discriminant analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Handan, Rabitah (2000) Portland cement-based solidification/stabilization for the treatment of industrial waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hew, Kin Yoong (2000) Determination of factors of delays in construction project by using linked bar chart planning method : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Indra, Indra (2000) Kaedah pengawalan kos projek binaan yang diamalkan oleh kontraktor di Sumatera Barat Indonesia : kes kajian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Faridah (2000) Kajian terhadap perlaksanaan sistem "design and build" bagi projek jambatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Juki, Mohd. Irwan (2000) Prestasi sambungan keratan keluli tempatan pada paksi minor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamaruddin, Tantish (2000) Penggunaan surety bond di dalam industri binaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasim, Narimah (2000) Integrating construction sheduling and knowledge-based systems for generating material scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khatib, Anwar (2000) Keupayaan galas model asas rakit berusuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koay, Hoon Chiow (2000) Management of hazardous chemicals used in gas pipeline operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koh, Heng Boon (2000) Kerjabata galas beban sebagai kaedah rekabentuk alternatif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kuo, Eng Kiong (2000) Penggunaan penapis pasir dalam pengolahan air untuk komuniti kecil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lam, Fei Shiong (2000) A case study on the reformulation of a competitive strategy in a small technology intensive company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Chao Yang (2000) Quality assurance-route to improve the reproducibility of colour in textile industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Sooi Chuen (2000) Documentation of project quality plan for project management company in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Sooi Chuen (2000) Relationship between knowledge management and information technology infrastruktur with project performance in construction consulting companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Chai Lee (2000) On-site emergency response plan study for non major hazard installation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Jee Yat (2000) Construction of Kuala Lumpur Tower - a case study of technology transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Jit Kheng (2000) Soil classification comparison between dry and wet sieving on cohesive soils using BSCS and USCS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kee Ley (2000) Ultimisation of a bussiness organisation - : a study in the financial and management aspect of the organisation : Promet Fabrication Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lum, Kate Siew Yin (2000) Quantitative risk assessment of a petroleum tankyard facility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Ali, Kamaruddin (2000) Pre-estimate of school building using knowledge-based system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Lani, Nor Hafizi (2000) Penentuan anggaran harga berpatutan bagi turapan jalan blok konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Mohhar (2000) Sifat-sifat kejuruteraan grut terhadap struktur rasuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Isa, Mohd. Fairuz (2000) Model studies on the effect of deep excavation on pore water pressure and settlement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd., Zamri (2000) Rainfall-runoff model calibration and daily streamflow simulation for an ungauged catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shah, Zulkarnain (2000) The incorporation of maintenance requirements and planning at the design and construction stages : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Munisamy, Thavarajah (2000) Contractors' approaches to risk indentification at the tendering stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naim, Mohd. Farid (2000) A study on project management for projects with & without project manager. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Novrial, Novrial (2000) Kaedah silinder tanah-kapur untuk penstabilan cerun laterit semulajadi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nursidin, Nursidin (2000) Kelakuan kelesuan pada konkrit berkekuatan tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Haslynda (2000) Auditing of water quality parameters in environmental impact assessment using numerical index method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rebu, Jamiran (2000) Pengurusan pemulihan dari kelewatan di dalam industri pembinaan : kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saad, Sharima (2000) Kajian hubungan rekabentuk, fungsi dan kos kemudahan bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subramaniam, Saravanan (2000) Subordinates preference of leadership behavior : task oriented or people orientated. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Arizu (2000) Analysis on the buckling behaviour of thin-walled elements in bending. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syarif, Basri (2000) Ciri-ciri pengukuhan tanah liat dengan perparitan tegak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Chin Keong (2000) Reinforced concrete ring beams : preliminary non-linear finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Yee Ling @ Irene (2000) Information system for work-in-process (WIP) tracking : a case study in Altera Corp. (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Beng Hock (2000) Reviewing the project delivery systems used in Malaysia Construction Industry : focus on the conventional method and the design and build method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Yee Sin (2000) Hydraulic investigation in the design and development of artificial seagrass (SGRASS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teo, Bian Sim (2000) Minimizing deficiencies in managing projects at VDO-Malaysia Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahab, Wilton (2000) Panjang optimum lorong pecutan bagi operasi mencantum di jalan raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Keng Lian (2000) Construction risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Jit Ming (2000) Management issues in planning, design and construction of sewerage treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yeoh, Chai Lai (2000) A study on the implementation of health and safety management in an engineering company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Norhanim (2000) Penyediaan pelan kualiti projek untuk perunding penyelia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.