Browse by Type

Awang, Mohd. Azrie (2019) Optimization and fractionation of quercitrin-rich extract from Melastoma malabthricum leaves and its bioactivities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Azman, Muhammad Asyiq (2019) Synthesis and utilization of β-cyclodextrin modified chitosan for the adsorption of aspirin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdul Karim, Norsuhada (2019) Extraction and microencapsulation of polyphenol-rich antioxidant from Clinacanthus nutans for controlled release formulation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kumar, Thanikasalam (2019) Parametric performance and operational characteristics of motor gasoline fuel using Lycoming o-320 aviation engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Yeng, Min Yi (2019) Surface display of endoglucanase and β-glucosidase using ice nucleation protein a from Erwinia ananas on Escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Aziz, Ameera Syaheerah (2019) Acid red 27 decolourisation and simultaneous electricity generations by mixed bacterial cultures in microbial fuel cell. Masters thesis, Universiti Teknologi Malaysia.

Al-Maqtari, Helmi Mohammed AbdulGhani (2019) Synthesis, antifungal and anti-hiv activities of new heterocyclic compounds. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yamusa, Yamusa Abdullahi (2019) Structural, luminescence properties and Judd-Ofelt analysis of rare-earth doped calcium-sulfoborophosphate and barium-sulfoborophosphate glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wong, Winny Kai Li (2019) Candida rugosa lipase supported on silica-coated magnetite nanoparticles for hydrolysis of olive oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wang, Yao (2019) 8-port 5G massive MIMO in sub-6 ghz base station for LTE bands 43/46 application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Samuel, Williams Opeyemi (2019) Accident prevention model for the building construction industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Nurudeen Mahmud (2019) An adaptive and distributed intrusion detection scheme for cloud computing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ting, Joseph Lian Hock (2019) Adaptive distance protection to prevent mal operation with STATCOM on a transmission line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Said, Karzan Wakil (2019) Adaptive model for web engineering methods to develop multi web applications in agile environment. PhD thesis, Universiti Teknologi Malaysia.

Wan Bejuri, Wan Mohd. Ya’akob (2019) Adative memory and particle based sequential implementation resampling for particle filtering. PhD thesis, Universiti Teknologi Malaysia.

Salum, Khamis (2019) An adoption model of cloud enterprise resources planning for Malaysian small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Adam, Mohd. Ridhwan (2019) Adsorptive natural zeolite ceramic membrane for ammonia removal in wastewater. PhD thesis, Universiti Teknologi Malaysia.

Muhammad Younas, Muhammad Younas (2019) Agile development in cloud computing for eliciting non-functional requirements. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Al-Jaberi, Safaa Jawad Alwan (2019) Agilizing interaction flow model language by using kanban for covering web application short lifecycle. Masters thesis, Universiti Teknologi Malaysia.

Mohammed, Sulaiman (2019) Agrobacterium-mediated transformation of rice flowering locus T1 gene in MR219 rice shoot apex. PhD thesis, Universiti Teknologi Malaysia.

Hassan, Muhd. Hasnizam (2019) Amalan terbaik dalam menguruskan kutipan caj penyenggaraan di rumah pangsa kos rendah. Masters thesis, Universiti Teknologi Malaysia.

Ab. Aziz, Siti Norshidah (2019) Anaerobic digestion of pineapple waste using a microbial consortium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mostafiz, Suraiya (2019) Analysis of embryogenic callus induction and regeneration of indica rice variety of Malaysia. PhD thesis, Universiti Teknologi Malaysia.

P. Ramli, Mohd. Hilmi (2019) Anggaran hasilan air tadahan Sungai Kelantan dengan menggunakan teknik penderiaan jauh. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Musa, Salamatu (2019) Antecedents of business intelligence usage : a case study of Universiti Teknologi Malaysia (UTM). Masters thesis, Universiti Teknologi Malaysia.

Khan, Sohrab (2019) Antecedents of trust using extended technology acceptance model for government social media services. PhD thesis, Universiti Teknologi Malaysia.

Maruthai, M. Yoshiny S. (2019) Anti-cancer activity and immunoadjuvant properties of edible bird's nest extracts on human breast cancer cell line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

S. Maruthai, M. Yoshiny (2019) Anti-cancer activity and immunoadjuvant properties of edible bird’s nest extracts on human breast cancer cell line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Rabiu, Zainab (2019) Anti-inflammatory activities of phenolic compounds in fractionated pyroligneous acid from slow pyrolysis of palm kernel shell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Kam, Kar Yern (2019) Antibiotic resistance bacteria in aquaculture sources in Johor, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zakaria, Intan Nursuraya (2019) Antioxidant, antibacterial activity and in silico study of selected medicinal plants against pathogenic bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Aja, Agi Augustine (2019) Application of natural polymers and nanoparticles in enhancing oil recovery at reservoir condition. PhD thesis, Universiti Teknologi Malaysia.

Olayinka, Gbadamosi Afeez (2019) Application of polymeric nanofluids for enhanced oil recovery in mid-permeability sandstone. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mat Nasir, Muhamad Hakim (2019) Application of polypropylene nanosilica as additives in water based mud to improve rheological properties and shale stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Haris, Somayeh Asadi (2019) Arsenic biosorption by psychrotrophic arctic bacteria. PhD thesis, Universiti Teknologi Malaysia.

Abd. Samad, Nurul Ashikin (2019) Aspect-based sentiment analysis towards technical and vocational education and training in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Mohammad Ridwan Reyaz (2019) Assessing forecasting performance on gold data using artificial neural network based models. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Radzi, Ridzuan (2019) Assessment of carbon footprints in road operation and maintenance activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Habiba Ibrahim (2019) Assessment of hybrid model for sustainable sanitary landfill siting using geospatial and geotechnical techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mustafa, Nordhalia (2019) Assessment of indigenous community social-economy sustainability using geographical information system. Masters thesis, Universiti Teknologi Malaysia.

Mat Yatim, Fazilah (2019) Assessment of key success factors in the utilization of geographic information system for distribution electrical network at Tenaga Nasional Berhad. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Maruti@Ezani, Syaza Faiqah (2019) Assessment of proposed dams in reducing flood hazard in Kelantan River basin using hydrodynamic model and geospatial techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed, Roslan (2019) Assessment of willingness to accept upgrading water supply system for rural indigenous settlement. PhD thesis, Universiti Teknologi Malaysia.

Idris, Mohd Azlan (2019) An assessment towards establishment of a policy framework for Malaysia’s space sector development. Masters thesis, Universiti Teknologi Malaysia.

Ng, Pooi Leng (2019) Auction price index model for residential properties. PhD thesis, Universiti Teknologi Malaysia.

Sandin, Easter Viviana (2019) Automated pairwise testing approach based on classification tree modeling and negative selection algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ong, Kok Haur (2019) Automatic white matter lesions detection and segmentation of brain magnetic resonance images. PhD thesis, Universiti Teknologi Malaysia.

Ahmad, Zahoor (2019) Autonomous underwater vehicle path planning data aggregation scheme for underwater linear sensor network. Masters thesis, Universiti Teknologi Malaysia.

Ibrahim, Muhamad Shah (2019) Awareness of Wasiyyah as Islamic estate planning instrument among muslim academician in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Abdullahi, Mohammed (2019) Batch fermentation system for biohydrogen production by klebsiella sp. abz11 isolated from antarctica. PhD thesis, Universiti Teknologi Malaysia.

Mohamad Esham, Mohamad Izrin (2019) Bauxite-based hollow fiber membrane for oilfield produced water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Alsaba, Yamen (2019) Beamforming and non-orthogonal multiple access for rate and secrecy enhancement of fifth generation communication system. PhD thesis, Universiti Teknologi Malaysia.

Kerk, Wen Chiann (2019) Bee-based sensor using apis mellifera for detection of Andrographis paniculata volatile compounds. PhD thesis, Universiti Teknologi Malaysia.

Palis, Prescilla (2019) Best practices for public universities building maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Aldulaimi, Musaab Adil Abdullah (2019) Best value procurement for contractor selection in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yahya, Noor Fateen Afikah (2019) Biodegradation of AR-27 dye and electricity generation by enterobacter cloacae NF2015. Masters thesis, Universiti Teknologi Malaysia.

Chiong, Meng Choung (2019) Biodiesel combustion characteristics under reacting swirl spray condition. PhD thesis, Universiti Teknologi Malaysia.

Ndejiko, Mohammed Jibrin (2019) Bioflocculant production by aspergillus flavus using chicken viscera as a substrate. PhD thesis, Universiti Teknologi Malaysia.

Mahmud, Saiful Azam (2019) Biogas dry reforming using nickel supported on regenerated spent bleaching earth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdul Muin, Nor Azira (2019) Biohydrogen purification using methyldiethanolamine and caustic in a two stage absorption system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Alsharafi, Amatalraof Abdullah Abdulwahed (2019) Biomimetics for passive air conditioned design for buildings in the hot arid regions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mawi, Saberi (2019) Bioremediation of shrimp pond effluent using outdoor seaweed recirculating culture system. PhD thesis, Universiti Teknologi Malaysia.

Raja Nordin, Nurulhuda (2019) Biosynthesis of copper (II) oxide nanoparticles using murraya koenigii leaf extract and their catalytic activity in the reduction of nitroaromatic compounds. Masters thesis, Universiti Teknologi Malaysia.

Loh, Kok Liang (2019) Blue ocean leadership for sustaining lean manufacturing in Malaysian Automotive Industry. PhD thesis, Universiti Teknologi Malaysia.

Tang, Chun Yu (2019) Boron nitride nanocomposite membrane for organic pollutant and salt removal from water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Chen, Jian (2019) Brand loyalty model for mobile social network application market in China. PhD thesis, Universiti Teknologi Malaysia.

Azman, Nadiah (2019) Building condition assessment on a heritage building : Dato Abdullah Jaafar building. Masters thesis, Universiti Teknologi Malaysia.

Ibrahim, Izzuain (2019) Building condition assessment on Datin Seri Endon residential college. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yong, Hua Song (2019) Building information modelling integration into Public-Private Partnership (PPP) risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Seghier, Taki Eddine (2019) Building information modelling-based approach for aspects of green building evaluation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamzani, Intan Nurfauzirah Shafiqah (2019) Bus rapid transit at isolated vehicle actuated junction using recall and green extension bus priority strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sabli, Abd. Ramzi (2019) Bus rapid transit using compensation method as bus priority system at isolated three-arm junction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Safian Suri, Muhammad Faizal Shah (2019) Cabaran inisiatif pengeluaran hakmilik bagi program penempatan rakyat termiskin. Masters thesis, Universiti Teknologi Malaysia.

Alias, Mohd. Azhar (2019) Cabaran pelaksanaan program pembangunan masyarakat setempat. Masters thesis, Universiti Teknologi Malaysia.

Ong, Zhen Ling (2019) Capacity determination of intermodal container frame in resisting housing load. Masters thesis, Universiti Teknologi Malaysia.

Musa @ Ab. Ghani, Mohd. Lukman (2019) Catalytic cracking of residual palm oil and regeneration of spent bleaching earth. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Muhammad Hassan, Wafiatun Najihah (2019) Cause of delay in final account settlement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azhar, Shahrizal (2019) The causes of project delay in the ministry of defence, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ezeilo, Uchenna Regina (2019) Cellulase and xylanase-producing Trichoderma Asperellum and Rhizopus Oryzae for effective saccharification of oil palm frond leaves by solid-state fermentation. PhD thesis, Universiti Teknologi Malaysia.

Mokhtar Yazid, Muhammad Syahmi Afif (2019) CFD simulation of oil-water flow in a horizontal pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wong, Lydia Lee (2019) The challenges of facility manager involvement at design stage using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Festus, Akinyoyenu Afolabi (2019) Changes of urban green space patterns in Akure, Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mior Shahidin, Shazatul Akmaliah (2019) Characterisation of electroless deposition parameter of copper on silicon wafer for through silicon via application. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hadi, Atieya (2019) Characterization and antibacterial activity of synthesized zeolite from natural kaolinite loaded with streptomycin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah, Nur Amira Sahirah (2019) Characterization and properties of epoxidized natural rubber toughened poly (lactic acid) reinforced by graphene nanofiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Salihin, Norafizah (2019) Characterization of aluminium doped zinc oxide nanostructures synthesized by thermal evaporation method. Masters thesis, Universiti Teknologi Malaysia.

Assadat Husain, Mohamad Annuar (2019) Characterization of irradiated fuel at triga puspati research reactor. PhD thesis, Universiti Teknologi Malaysia.

Yousef Almthailee, Yousef Hamdan (2019) Characterization of kaolin clay treated with ground granulated blast-furnace slag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Bahaudin, Mohd. Zulfahmi (2019) Characterization of laser surface roughening on copper using a Q-switched ND: YAG laser. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bahaudin, Mohd. Zulfahmi (2019) Characterization of laser surface roughening on copper using a Q-switched Nd:YAG laser. PhD thesis, Universiti Teknologi Malaysia.

Mohamad Yunos, Nurhazirah (2019) Characterization of the spheroids from the first order polarzation tensor. Masters thesis, Universiti Teknologi Malaysia.

Hasan, Hazwani (2019) Characterization of thermoplastic polyurethane elastomer coated pineapple leaf fiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mah, Ming Hui (2019) Characterization of xylanase from microbulbifer sp. CL37 for industrial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kamaruddin Shah, Masuri Kama (2019) Chemical constituents and bioactivity studies of artocarpus fulvicortex F. M. Jarret, artocarpus integer var. silvestris corner and artocarpus rigidus blume. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Arsad, Siti Rosilah (2019) Chiral separation of ketoconazole and itraconazole anti-fungal drugs using experimental and computational approaches. PhD thesis, Universiti Teknologi Malaysia.

Sabar, Salehudin (2019) Ciri Al-Hikmah dalam pengajaran Al-Quran sekolah rendah di bandaraya Kuching, Sarawak. PhD thesis, Universiti Teknologi Malaysia.

Mohamad, Nur Aziemah (2019) Cloud usability features to support knowledge transformation in design learning. Masters thesis, Universiti Teknologi Malaysia.

Mohamed, Mohd. Hilmi (2019) Co – extruded triple layer hollow fiber solid oxide fuel cell using methane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamed, Mohd. Hilmi (2019) Co-extruded triple layer hollow fiber solid oxide fuel cell using methane. PhD thesis, Universiti Teknologi Malaysia.

Zulkifli, Nurfarah (2019) Co-prime and relative co-prime probability for nonabelian metabelian groups of order at most 24 with their related graphs. Masters thesis, Universiti Teknologi Malaysia.

Rahmat, Normaizatulakmar (2019) A combined adsorption and ozonation process for removal of lindane in aqueous medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yahya, Nurhaziyatul Adawiyah (2019) Combining group method of data handling models using artificial bee colony algorithm for time series forecasting. Masters thesis, Universiti Teknologi Malaysia.

Yahya, Ahmad Shuib (2019) Comparative pattern of spatial visibility and stationary activity in Malay traditional and low-income houses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mahmood @ Mohd. Zawawi, Aidil (2019) A comparative study of Malaysian expressway traffic management with selected countries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sharafaddin, Osama (2019) Comparing driller’s and engineer’s methods to control kick for basement reservoirs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

AbdulKader Yousfi, AbdulKarim (2019) Comparison between batch and fed-batch cultures of Chinese hamster ovary-DG44 cell using multi-well plate. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Talib, Siti Bazura (2019) Comparison method of segmental box girder (SBG) erection using launching gantry and trestle in MRT project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Salehhon, Nasuha (2019) Computed tomography dose index free-in-air and single scan dose profile analysis of multi-slice scanners. Masters thesis, Universiti Teknologi Malaysia.

AlSolami, Somiah Merezeeq A (2019) Computing Sylvester resultant matrix in hermite polynomials. Masters thesis, Universiti Teknologi Malaysia.

Zawawi, Mohd. Asadi Abdullah (2019) Concentration of heavy metal in water, sediment and aquatic life at straits of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

M. Saeed, Aseel Abdulhaleem (2019) Condition assessment of reinforced concrete : bridge structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rahim, Abdul Rafie (2019) Consequences of non-value adding activities on construction project performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Chong, Jia Wen (2019) Construction waste management practice towards sustainable development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Damerin, Noor Haslyana (2019) The consumers' convenience dimensions in performing food online purchase and its logistics level of service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Damerin, Noor Haslyana (2019) The consumers’ convenience dimensions in performing food online purchase and its logistics level of service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Azmi, Nor Azlinda (2019) Contextual factors influencing engineering students' motivation in learning computer programming. Masters thesis, Universiti Teknologi Malaysia.

Entika, Christie Lanjing (2019) Contextualised action learning framework in developing entrepreneurial skills for civil engineering students. PhD thesis, Universiti Teknologi Malaysia.

Wanichavorapong, Nittee (2019) Continuance usage intention model of physical activity tracking technology. PhD thesis, Universiti Teknologi Malaysia.

Haghighati, Razieh (2019) Control chart patterns recognition with constrained data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Wong, Kung Ngie (2019) Control of a photovoltaic source emulator using artificial neural network. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Azmi (2019) Control of air-conditioning system for load management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Mohamed Nazri, Akmal Fazrin (2019) Cooperative beamsteering in wireless sensor network based on backtracking search algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Jasman, Siti Maryam (2019) Copper species modified carbon nitride as fluorometric detection of nitrate and nitrite ion and as catalyst for reduction of 4- nitrophenol. PhD thesis, Universiti Teknologi Malaysia.

Jasman, Nursyiqah (2019) Correlation between uniaxial compressive strength and point load strength index of granite sample. Masters thesis, Universiti Teknologi Malaysia.

Ismail, Iskandar Haszuan (2019) Correlational activity between global warming and lightning density. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Ibrahim, Nor Syaidah (2019) Corrosion inhibition studies by surfactants in the presence of 2-methyl thiophene on mild steel. PhD thesis, Universiti Teknologi Malaysia.

Hussein, Hadeel Jalil (2019) Corrosion rate prediction of oil flowing in pipe lines by using computational fluid dynamics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohammed Younis, Ibrahim (2019) Cost benefit analysis of photovoltaic technology adoption at rest and service area for Malaysia Highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismail, Afiqah (2019) Crack detection on retaining wall by using thermal camera and image processing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohsenizadeh, Saeid (2019) Crashworthiness performance of optimized auxetic foamfilled tubes under axial loadings. PhD thesis, Universiti Teknologi Malaysia.

Kamarrudin, Alia (2019) Critical success factors and barriers of implementing lean manufacturing in precast industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alsolami, Badr Mohammed A. (2019) Crowoding in Mina based on pilgrims’ perception of safety and comfort in Hajj. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Subki, Luqman (2019) Cuckoo lévy flight with otsu for image segmentation in cancer detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohammed, Idi (2019) Cybersecurity capability maturity model for critical information technology infrastructure among Nigeria financial organizations. Masters thesis, Universiti Teknologi Malaysia.

Alsaati, Leena Zeini J. (2019) Cycle generative adversarial network for unpaired sketch-to-character translation. Masters thesis, Universiti Teknologi Malaysia.

Giro, Mustapha Abubakar (2019) Data mining techniques for tourist review classification. Masters thesis, Universiti Teknologi Malaysia.

Omar, Salma Hussein (2019) Deep learning approach for student performance prediction in e-learning. Masters thesis, Universiti Teknologi Malaysia.

Ibrahim H.a, Nawi A.M.b, Ali A. (2019) The depiction of metaphorical aspects in the selected literary work by the American dramatist Eugene O'Neill. UNSPECIFIED thesis, UNSPECIFIED.

Ibrahim H.a, Nawi A.M.b, Ali A. (2019) The depiction of metaphorical aspects in the selected literary work by the American dramatist Eugene O'Neill. UNSPECIFIED thesis, UNSPECIFIED.

Mohammed, Abubakar Ali (2019) Design and fabrication of arc thermal plasma reactor for petroleum sludge treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdul Muttalib, Nor Azyati (2019) Design and performance of a milliliter range bioreactor prototype for bioprocess operation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Zhang, Ying Ju (2019) Design influence on boutique hotel guest experience : a case study of Boutique Hotel Rosa Malacca, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Srabanti, Monisha Ghosh (2019) Design of a Non-Dispersive Infra-Red (NDIR) based CO2 sensor to detect the human respiratory CO2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Rosdi, Muhammad Aliff Ashraff (2019) Design of collimator of neutron diffractometer system at low power reactor TRIGA PUSPATI. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kirish, Boodhoo (2019) Design of dual-band matching network for highly efficient power amplifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Wan Rani, Wan Suhaila (2019) Determinants of continuance intention of user on smartphone-based traveller information systems in the greater Klang Valley. PhD thesis, Universiti Teknologi Malaysia.

Ahmed, Zaheer (2019) Determinants of individual investors investment decision in Pakistan stock exchange. PhD thesis, Universiti Teknologi Malaysia.

Abdul Latheef, Mohamed Inas (2019) Determination of cocaine in spiked saliva using liquid-liquid extraction and gas chromatography- mass selective detector methods. Masters thesis, Universiti Teknologi Malaysia.

Usman, Abubakar (2019) Determination of performance specifications of gamma spectrometry systems in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Mathew, Ferns Mathew (2019) Developing a net-centric foresight model for the management of emerging risks. PhD thesis, Universiti Teknologi Malaysia.

Sahar, Noor Syazwana and Che Harun, Fauzan Khairi (2019) Development and analysis of electrocardiography circuit on flexible polymers. Masters thesis, Universiti Teknologi Malaysia.

Bior Barach, Bior Atem (2019) Development and identification of petrophysical rock typing for effective reservoir characterization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Islam, Tahmida (2019) Development of a hybrid exoskeleton to reduce muscle strain in oil palm harvesting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Ab. Razak, Muhammad Syazwan (2019) The development of a network autonomous integrity monitoring positioning system in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Selamat, Ubaidullah (2019) Development of air pollutants dispersion algorithm in urban industrial park for air pollution simulation. PhD thesis, Universiti Teknologi Malaysia.

Mohammad, Toaha (2019) Development of an image processing model for the measurement of vibrations in structural elements by matlab and smartphone digital camera. Masters thesis, Universiti Teknologi Malaysia.

Abdul Wahab, Khairul Aswad (2019) Development of immobilised cell based electrode for usage in microbial fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Sarki, Sani Abdullahi (2019) Development of payment performance assessment tools for the Nigerian construction industry. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Yusof, Siti Hajar (2019) A development of the cyberpsychology model for adolescent. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Rosli (2019) Development of web-based life cycle cost analysis for green building index energy efficiency evaluation. PhD thesis, Universiti Teknologi Malaysia.

Nordin, Nurul Huda (2019) Development patterns of necrophagous flies infesting rabbit carcasses decomposing in Mount Kapur cave and its surrounding primary forest habitats in Kuching, Sarawak. Masters thesis, Universiti Teknologi Malaysia.

Mat Kamal, Siti Nuur-Ila (2019) Digital forensics adoption model for Malaysian Law Enforcement Agencies (MLEAs). PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Aziz, Muhammad Afiq (2019) Dimensional survey using terrestrial laser scanning for industrial construction in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Hassan, Aivea Nur Putri (2019) Disaster survivability for optical fiber networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

A. Rahman, Muhammad Farid (2019) Discrete homotopy analysis method on heat conduction with radiation problem via fredholm integral equation. Masters thesis, Universiti Teknologi Malaysia.

Foo, Keat How (2019) Discrimination of counterpest fifty Ringgit Malaysia banknotes using attenuated total reflectance-fourier transform infrared spectroscopy and chemometric methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Khalid, Fasha Farhanni (2019) Dissipation effects with natural convection flow over a non-isothemal vertical cone. Masters thesis, Universiti Teknologi Malaysia.

Ng, Su Fen (2019) Distance insensitive concrete crack detection using convolutional neural network with controlled blurriness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ooi, Zhi Sin (2019) DNA barcoding for species identification in Malaysian processed fish products. Masters thesis, Universiti Teknologi Malaysia.

Ayegbusi, Olutobi Gbenga (2019) Double skin facade overall thermal transfer value correction factor in hot humid climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Abdulrahman, Abdulrasheed (2019) DRY reforming of DRY reforming of methane over stabilized nickel-lanthanum supported on fibrous KCC-1 catalyst methane over stabilized nickel-lanthanum supported on fibrous KCC-1 catalyst. PhD thesis, Universiti Teknologi Malaysia.

Hussain, Asif (2019) Dry reforming of methane using cold plasma reactor for different dielectric materials and modified MgAl2O4 catalysts. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Md. Abdul Kafi, Md. Abdul Kafi (2019) Effect of attribute perception factors on mode choice preferences among public transport users. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Hossain, Md. Awlad (2019) Effect of effective micro-organism on temperature variation and properties of concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammed Waleed, Almudallal (2019) The effect of geopolitical environment on the influence of crisis management in strategic planning process. PhD thesis, Universiti Teknologi Malaysia.

Ahmad Ritzzney, Muhammad Isamuddin (2019) Effect of heat treatments on silicon dioxide and silicon nitride nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Amer Nordin, Jamillah (2019) Effect of mechanical milling time on preparation characteristic, magnetic behaviour and in-vivo study of hematite-hydroxyapatite nanocomposite. PhD thesis, Universiti Teknologi Malaysia.

Rehman, Zia Ur (2019) The effect of personality traits and self enhancement motives on brand outcomes in branded clothing industry. PhD thesis, Universiti Teknologi Malaysia.

Jabeen, Samrena (2019) Effect of retail service quality on switching intentions among hypermarket customers. PhD thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.

Shahverdi, Masoumeh (2019) The effect of social entrepreneurship characteristics and education on social entrepreneurship intention. PhD thesis, Universiti Teknologi Malaysia.

Hamdi, Noor Faezah (2019) The effect of thermal ageing on low voltage cross-linked polyethylene insulated cable. Masters thesis, Universiti Teknologi Malaysia.

Rezle, Nor Anita (2019) Effect of time-reversal symmetry breaking on static properties of rare-earth nuclei within Hartree-Fock-Plus-Bardeen-Cooper-Schrieffer approach. Masters thesis, Universiti Teknologi Malaysia.

Al-Amoodi, Waleed Hussein Ahmed Bawjeh (2019) Effect of transcranial magnetic stimulation on electroencephalogram activity and emotions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering and Health Sciences.

Mohd. Asrah, Norhaidah (2019) Effective vector variance in modeling Malaysia highway traffic network. PhD thesis, Universiti Teknologi Malaysia.

Cheah, Siok Teng (2019) The effectiveness of the implementation of CIPAA 2012 in alleviating the payment ills of Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Hussien, Nur Adilah (2019) Effects of carbon content on the photocatalytic activity of zinc oxide under visible light irradiation. Masters thesis, Universiti Teknologi Malaysia.

Syahrul, Laura (2019) The effects of organizational justice, perceived organizational support, gender and age on organizational citizenship behaviour. PhD thesis, Universiti Teknologi Malaysia.

Ramanathan, Karthigeyan (2019) Effects of quarry blasting towards the residential area at Kangkar Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Wong, Jing Siong (2019) Effects on loading calculation of reinforced concrete structural design subjected to fire: review on building codes and standards. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Teh, Kun Jie (2019) Efficiency of tuned liquid dampers in mitigating vibration of a plan-irregular structure. Masters thesis, Universiti Teknologi Malaysia.

Einab, Abdirahman Abshir (2019) Elements that will improve driver’s safety during poor weather conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Sofi, Muhammad Izzuddin (2019) Energy absorption capability of multi-cell thin-walled tube under lateral loading. Masters thesis, Universiti Teknologi Malaysia.

Basius, Mohd. Syafiq (2019) Energy dissipation and ductility of steel plate shear wall with perforation. Masters thesis, Universiti Teknologi Malaysia.

Mohamad, Mohamad Hamzi (2019) Energy efficiency performance model for office buildings In Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Jatu, Gabriel (2019) Energy management system in fuel cell electric vehicle using fuzzy logic controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad, Shazlimanshah (2019) Enforceability of the liquidated and ascertained damages and effect of section 75 contracts ACT 1950. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Samsi, Siti Zakiah Melatu (2019) Enhanced adoption model for collaborative knowledge sharing in Malaysia halal food industry. PhD thesis, Universiti Teknologi Malaysia.

Abdelrahman, Malik Nasereldin Ahmed (2019) Enhanced cluster based trust management framework for mobile Ad hoc networks. PhD thesis, Universiti Teknologi Malaysia.

Sadiq, Fatai Idowu (2019) Enhanced context-aware framework for individual and crowd condition prediction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Goh, Eg Su (2019) Enhanced device-based 3D object manipulation technique for handheld mobile augmented reality. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ahmad, Muhammad Anwar (2019) Enhanced facial expression animation for zapin dance using ray casting and position-based estimation. Masters thesis, Universiti Teknologi Malaysia.

Aluhwal, Omar Kalifa Hammuda (2019) Enhanced oil recovery by surfactant alternate carbonated water injection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Lim, Kah Seng (2019) Enhancement of automated black-box web application vulnerability assessment algorithms. PhD thesis, Universiti Teknologi Malaysia.

Furmuly, Abdul Mubasher (2019) Enhancement of mercury depuration from cockles (Anadara Granosa) utilizing catalytic chelation technique. Masters thesis, Universiti Teknologi Malaysia.

Gaithuru, Juliet Nyokabi (2019) Enhancement of Nth degree truncated polynomial ring for improving decryption failure. PhD thesis, Universiti Teknologi Malaysia.

Mohamad Zani, Mohamad Zharif (2019) Enhancement of the extracted maximum power of PV array during partial shading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Abdul Rahim, Mohd. Shaiful (2019) Enhancing blood ordering management of Malaysian national blood centre. Masters thesis, Universiti Teknologi Malaysia.

Chizoba, Okwara Jerry (2019) Ensemble of classifiers for detection of advanced persistent threat. Masters thesis, Universiti Teknologi Malaysia.

Hui, Kar Hoou (2019) Ensemble support vector machines and dempster-shafer evidence theory for machinery multi fault diagnosis. PhD thesis, Universiti Teknologi Malaysia.

Al-Rimy, Bander Ali Saleh (2019) An ensemble-based anomaly-behavioural crypto-ransomware pre-encryption detection model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Kasim, Iddrisu (2019) Environmental sustainability in real estate development in Ghana. Masters thesis, Universiti Teknologi Malaysia.

Zaini, A’amir Hashim (2019) Estimating acacia mangium plantations standing timber volume using an unmanned aerial vehicle. Masters thesis, Universiti Teknologi Malaysia.

Abd. Karim, Nurul Izzati (2019) Estimation and modelling of Olak Lempit peatlands based on ground penetrating radar and laboratory investigation. PhD thesis, Universiti Teknologi Malaysia.

Jamri, Heirlina Mawarni (2019) Estimation of debris flow sedimentation volume through numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Tan, Hui Ru (2019) Estimation of high-dimensional brain connectivity networks using functional magnetic resonance imaging data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Mohamed, Ihsan (2019) Estimation of stature from hand and handprint measurements in the monoethnic Maldivian population in Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alaskary, Abdulaziz Abdullah O. (2019) Evaluating human factors of information security awareness in Taibah University. Masters thesis, Universiti Teknologi Malaysia.

Subbarao, Anusuyah (2019) Evaluation model for assessing the effectiveness of coordination processes in global software development projects. PhD thesis, Universiti Teknologi Malaysia.

Daud @ Abdullah, Fareh Nunizawati (2019) Evaluation of Bacillus Licheniformis strains and their dominant type of oil recovery mechanisms under hydrocarbon-rich conditions. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zabidi, Nurul Nadrah (2019) Evaluation of Colubrina Asiatica extract using microwave-assisted extraction as saponin-based foaming agent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Jamaludin, Adilah (2019) An evaluation of planning appeal system of selected states in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Aris, Nurul Fatimah Az-Zaharah (2019) Evaluation of potential carbon dioxide sequestration and enhanced oil recovery in the Northern Malay Basin area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamad, Norhafizi (2019) Evaluation of riverbank erosion based on mangrove boundary changes identification using multi-temporal satellite imagery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public- private partnering project in perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public-private partnering project in Perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

Zulkefli, Nor Atirah Izzah (2019) Extended Runge-Kutta fourth order method with polynomial interpolation technique for fuzzy population models. PhD thesis, Universiti Teknologi Malaysia.

Putra, Nicky Rahmana (2019) Extraction and modelling of catechin from arachis hypogea skin using modified supercritical carbon dioxide. PhD thesis, Universiti Teknologi Malaysia.

Ramli, Wan Nurul Diyana (2019) Extraction of squalene from aquilaria malaccensis leaves using supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Noor Fadzilah (2019) Extraction of Swietenia macrophylla seed by using microwave assisted extraction technique and the characterisation of its phytochemical properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdullah Hamami, Nurul Faridah (2019) Fabrication, purification and characterization of multiwall carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia.

Mohammad, Noorita (2019) Factors influencing the purchase intention of organic personal care products. PhD thesis, Universiti Teknologi Malaysia.

Mohammad, Noorita (2019) Factors influencing the purchase intention of organic personal care products. PhD thesis, Universiti Teknologi Malaysia.

Mohd., Noorma Shamshiah (2019) Factors that contribute to problems in landscape management in the office building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Shaari, Norul Bahriyah (2019) Factors that influence the domain name system registration model in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Makerly, Harnetta Hashleynna (2019) Fault classification in a transmission line using discrete wavelet transform and artificial neural networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed, Norhafniza (2019) Fiber optic temperature sensor based on No-Core Fiber (NCF) for high temperature sensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Khairul Anuar, Safinaz (2019) Fibre optic sensing monitoring system for pile on slope. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Bilal, Muhammad Bilal (2019) Finite element modelling of crumb rubber concrete column subjected to earthquakes. Masters thesis, Universiti Teknologi Malaysia.

Abd. Rahman, Syazana (2019) Flashpacker and the influence of technological advances : a case study in Kota Kinabalu, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alsahn, Safaa Abbas Sadej (2019) Flexural behaviour of reinforced concrete beam incorporating coal waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Md. Khair, Nurull Qurraisya Nadiyya (2019) Forecasting crude oil prices using modified empirical wavelet transform with fuzzy C-Means clustering. Masters thesis, Universiti Teknologi Malaysia.

Basri, Abdul Hakim (2019) Formulation of general relative permeability correlation of field A. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ismail, Lukman Hakim (2019) Formulation of Malaysia-HSOPSC for nurse notification interruption in patient`s safety culture. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Zulikram, Fatin Husna (2019) Fractionation of Ficus deltoidea leaves extract using solid phase extraction on anti-ageing acitvity in vitro. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Zulikram, Fatin Husna (2019) Fractionation of ficus deltoidea leaves using solid phase extraction on anti-ageing activity in vitro. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ahmed Alshehhi, Nawaf Mohammed (2019) Framework for lean management in aluminium company in United Arab Emirates. PhD thesis, Universiti Teknologi Malaysia.

Ahmad Kailani, Nor Hafizah (2019) Free vibration of laminated composite plate and shell structures for constant and variable thickness. PhD thesis, Universiti Teknologi Malaysia.

Dandan, Muhammad Arif (2019) Friction and wear analysis of palm kernel methyl ester containing a polymeric viscosity index improver. Masters thesis, Universiti Teknologi Malaysia.

Hamza, Hentabli (2019) Fusion of molecular representations and prediction of biological activity using convolutional neural network and transfer learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Soleymani, Seyed Ahmad (2019) Fuzzy trust model for trustworthiness of information in vehicular ad hoc network. PhD thesis, Universiti Teknologi Malaysia.

Hamdan, Fakhru Ridhwan (2019) G-jitter unsteady free convection flow in a three dimensional body near a stagnation point region with heat generation. Masters thesis, Universiti Teknologi Malaysia.

Jahari, Puteri Nur Syahzanani (2019) Generating small mammals mitogenome reference dataset for Malaysian species. Masters thesis, Universiti Teknologi Malaysia.

Baharudin, Azfar Hilmi (2019) Global panel data modelling of industrial output. Masters thesis, Universiti Teknologi Malaysia.

Suradi, Siti Samahani (2019) Grafted hydrogel with switchable surface wettability based on temperature responsive poly(N-isopropylacrylamide) for oil/water separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Wong, Wui Kiet (2019) Green supply chain practices, environmental management accounting and performance of Malaysian ISO 14001 manufacturing organisations. PhD thesis, Universiti Teknologi Malaysia.

Rosli, Nennie Trianna (2019) Green trust, environmental quality awareness, green self-efficacy, environmental attitude in influencing green purchasing behavior. PhD thesis, Universiti Teknologi Malaysia.

Khan, Adil (2019) Ground improvement for ring beam tank foundation compared between vibro replacement against combination of dynamic techniques with numerical models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Deraman, Shahirah (2019) Growth and structural characterization of lanthanum-strontium-cobalt thin film synthesized by sol-gel dip coating for solid oxide fuel cell. Masters thesis, Universiti Teknologi Malaysia.

Ali Othman, Nur SyahmI Izzati (2019) Growth of Gynura procumbens and oreochromis spp. by using cocopeat media in aquaponics system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Nasrollahzadeh, Tahereh (2019) Guideline of lean critical success factors implementation in construction project. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Baba, Azizul (2019) Handover failure avoidance in wireless heterogeneous network by using matlab simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Omar, Habiba Hassan (2019) Harmonising Mudarabah practices in conventional regulatory regime in Tanzania. PhD thesis, Universiti Teknologi Malaysia.

Mohd Musa, Mohd. Syazwan (2019) Henna extract as a potential sacrificial agent in reducing surfactant adsorption onto quartz sand and kaolinite. PhD thesis, Universiti Teknologi Malaysia.

Mohammad Zamri, Aiman Syazwan (2019) Homogeneity tests and trend analysis for rainfall data in the southern region of Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Sabri, Aimi Najwa (2019) Hybrid artificial bee colony and flower pollination algorithm for grid-based optimal pathfinding. Masters thesis, Universiti Teknologi Malaysia.

Lukunti, Salisu (2019) Hybrid laplace transform solution for coupled partial differential equation of fumigant transport in stored grain. Masters thesis, Universiti Teknologi Malaysia.

Bibi, Tehmina (2019) Hybrid model of spatio-temporal assessment of landslide hazards by using airborne laser altimetry data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shiraz, Hassan (2019) Hydrodynamic modelling of a sea-crossing bridge in the Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abbas, Tariq (2019) Hydrogen production from phenol steam reforming using nickel-cobalt modified titania coupled magnesium aluminate nanocomposite catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Rozuki, Nur Fatin Aimilia (2019) Hydrogen production from sewage sludge via updraft gasification process in a bench - scale fixed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Rozuki, Nur Fatin Aimilia (2019) Hydrogen production from sewage sludge via updraft gasification process in a bench a scale fixed bed reactor. Masters thesis, Universiti Teknologi Malaysia.

Rozuki, Nur Fatin Aimilia (2019) Hydrogen production from sewage sludge via updraft gasification process in a bench – scale fixed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Khir Anuar, Muhammad Afiq (2019) Hydrolysis of chicken intestine for flavor development in cat food. Masters thesis, Universiti Teknologi Malaysia.

Syed Yaacob, Syariffah Nuratiqah (2019) Identification of lactic acid bacteria, physicochemical properties and antibacterial activities of Malaysian heterotrigona itama honey. Masters thesis, Universiti Teknologi Malaysia.

Abrahim, Araz Rajab (2019) Image splicing detection scheme using adaptive threshold mean ternary pattern descriptor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Said, Aminu Saad (2019) Impact of climate change, variability and adaptation strategies on agriculture in semi-arid region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abu Naim, Zalina (2019) Impak pembangunan ekonomi terhadap komuniti tanah bencah Setiu, Terengganu. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulibrahim, Mohamad Zulikhram (2019) Implementation challenges of greening industry in Pasir Gudang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Azmi, Nurshazriena (2019) The implementation of building information modeling in MACalaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

Azmi, Nurshazriena (2019) The implementation of building information modeling in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

Gyeyok, Ashio Gillian (2019) Implementation of green materials as supplementary cement replacement in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Eraman, Siti Nuranissa (2019) Implementation of three dimensional parcel for strata management corporation scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Azili, Norshahida (2019) Implication of liability transfer towards architect in the issuance of certificate of completion and compliance (ccc) in building industry. Masters thesis, Universiti Teknologi Malaysia.

Abd Elghariani, Kaiss Ali (2019) Implicit thinking knowledge injection framework for software requirements documentation in agile methodology. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Daud, Kauthar (2019) Improved differential search algorithms for metabolic network optimization. PhD thesis, Universiti Teknologi Malaysia.

Silvadorai, Kahuthaman (2019) Improved ensemble average approach for systolic blood pressure estimation. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Hatta, Noramalina (2019) An improved grey wolf optimiser sine cosine algorithm for minimisation of injection moulding shrinkage. Masters thesis, Universiti Teknologi Malaysia.

Akintoye, Kayode Akinlekan (2019) Improved methods for finger vein identification using composite median-wiener filter and hierarchical centroid features extraction. PhD thesis, Universiti Teknologi Malaysia.

Md. Maarof, Mohd. Zulariffin (2019) Improved mutual information method in combination model selection for forecasting tourist arrival. PhD thesis, Universiti Teknologi Malaysia.

Abu Bakar, Azureen Alya (2019) Improvement of the upstream project valuation in consideration of abandonment expenditure uncertainties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ismail, Norazila (2019) Improvement to constructor quality delivery by qlassic intergration into iso 9001 work process. Masters thesis, Universiti Teknologi Malaysia.

Mustafa, Siti Marhaida (2019) Improving functional properties of Punica Granatum Juice by probiotication using Lactobacillus species. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Nasir, Muhammad Adam Izzuddin (2019) In silico determination and analysis of Putative Haloalkanoic acid transport protein of Rhizobium Sp. Rc1. Masters thesis, Universiti Teknologi Malaysia.

Gunasekaran, Shivaranjini (2019) In silico modelling and molecular interaction of elongation factor receptor with pathogenic elongation factor tu 18. Masters thesis, Universiti Teknologi Malaysia.

Alias @ Che Rashid, Noor Izawati (2019) In silico unravelling of the Lactococcus lactis signal recognition particle and signal recognition particle receptor protein interfacial interaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamad Rosdi, Mohamad Norisham (2019) In vitro and in silico anticancer activities of Annona muricata linn leaves extracts on lung cancer cells. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Roslan, Nurul Aqilah (2019) In vivo tumour inhibitory and immunomodulatory effects of clinacanthus nutans ethanolic crude extract. Masters thesis, Universiti Teknologi Malaysia.

Ab. Rahim, Sakinah (2019) Indeks kesejahteraan spiritual Islam dalam kalangan remaja. PhD thesis, Universiti Teknologi Malaysia.

Danladi, Amos (2019) Indigenous knowledge in flood disaster risk reduction in Kaduna Town Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nawaz, Imran (2019) Individual congestion costs for private motorized vehicle users : a case study of mall road corridor and circular road corridor, Lahore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Nawaz, Imran (2019) Individual congestion costs for private motorized vehicle users : a case study of mall road corridor and vehicle users : (a case study of mall road corridor and circular road corridor, Lahore). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Firdaus, Firdaus (2019) Indoor positioning model based on people effect and ray tracing propagation. PhD thesis, Universiti Teknologi Malaysia.

Rosli, Mas Iliani (2019) Influence of considering Malaysia National Annex for seismic design of reinforced concrete building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hashim Lim, Noor Hashimah (2019) Influence of perceived neighbourhood environment and health behaviours on body mass index. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Othman, Norasman (2019) Influence of seasonal hydrological variation on swash zone morphological changes. PhD thesis, Universiti Teknologi Malaysia.

Misron, Siti Rashidah (2019) Influence of silver nanoparticles on optical properties of erbuim-samarium co-doped sodium lithium phosphate glass. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Fuza, Zatul Iffah (2019) Information communication technology adoption and business performance of tour operators in malaysia. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zain @ Zakaria, Mohd. Zuhan (2019) Information systems continuance model for employee in Waqf organisation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohd. Yunos, A. Rafidah A. (2019) Inhibition of cyclooxygenase and lipoxygenase activities of momordica charantia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Gambo, Ibrahim (2019) Innovative types of fuzzy gamma ideals in ordered gamma semigroups. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, May Ling (2019) Instructional scaffolding in online social collaborative learning environment for nurturing engineering students' knowledge construction level. Masters thesis, Universiti Teknologi Malaysia.

Ridwan Saeed, Intisar Ibrahim (2019) An instrument to measure students’ readiness for embedded system design course. PhD thesis, Universiti Teknologi Malaysia.

Nasution, Feldiansyah Bakri (2019) Integrated double loop data driven model for public policymaking. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohd. Yatim, Muhammad Hafiz (2019) Integrated framework of institutional analysis towards and development on effective marine spatial planning in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Raza Shah, Syed Ali (2019) Integrated quality and environmental management framework for small and medium food processing enterprises in Pakistan. PhD thesis, Universiti Teknologi Malaysia.

Khan, Muhammad Gohram (2019) Integrating community factors in Pakistan’s flood disaster management framework. PhD thesis, Universiti Teknologi Malaysia.

Yousefpour, Alireza (2019) Integration of feature subset selection methods for sentiment analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Khiyon, Noor Azeyah (2019) Integration of whole life cycle costing with sustainable facilities management for privatized building projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Sa’ad, Usman Bello (2019) Inter-relationship and performance analysis between direct and indirect property investments in Nigeria. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Shah, Shazwani (2019) Interactive spatial web-based system for eco-tourism in Royal Belum state park, Perak. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Sa’at, Nurul Iman (2019) Internet of Things early flood warning system with ethology input and fuzzy logic. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Mohamad Khairuddi, Muhammad Khawarizmi (2019) Interpretation of contracts : admissibility of pre-contractual negotiations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Neo, Sau Mei (2019) Interrelationships between environmental psychological factors and environmental behaviour among Malaysians. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Basri, Siti Mariah (2019) Investigating tourist's affective attachment in Melaka World Heritage site by using photo analysis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Mohd. Basri, Siti Mariah (2019) Investigating tourist’s affective attachment in Melaka World Heritage site by using photo analysis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainal, Nurul Syameem (2019) Investigation of acetaminophen content in over-the-counter medicine sold in Johor Bahru, Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Jumat, Yusri (2019) Investigation on the earthing system installation for buildings and structures in Sarawak. Masters thesis, Universiti Teknologi Malaysia.

Peter John Remek, Cassandra Darlene Ak. (2019) An investigation study of transmission line fault location using travelling wave. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alwee, Amir Akmal (2019) Issues and challenges of maintenances works for Universiti Teknikal Malaysia Melaka (UTeM) student accommodation under private finance initiative. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Idris (2019) Isu etika di kalangan profesional dalam industri pembinaan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Ahmad Fadzli Reza (2019) Keberkesanan pusat setempat (OSC) di pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Azizan, Muhammad Uzair (2019) Kerangka kawalan guna tanah pertanian ke arah kelestarian sekuriti makanan negara di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Jaafar@Kamis, Jimisiah (2019) Kesan latihan pemerkasaan usahawan terhadap kecerdasan emosi dan budaya usahawan. PhD thesis, Universiti Teknologi Malaysia.

Abu Hari, Farahazliza Hazie (2019) Kesedaran arkitek terhadap liabiliti profesional dalam pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Hussein, Ahmad Kamil I’zzuddin (2019) Kesesuaian rekabentuk tempat letak kereta di kediaman berstrata. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Noor, Athirah Afiqah (2019) Keupayaan pengurangan kebisingan konkrit berliang menggunakan cangkerang kelapa sawit sebagai gantian agregat bagi pembinaan penghalang kebisingan lebuh raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Loh, Seng Yap (2019) Key factors affecting the adaptation of prefabricated prefinished volumetric construction (PPVC) in Malaysia industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abd. Aziz, Muhammad Fakhrul Syukri (2019) Kinetic degradation of oil palm mesocarp fibre pyrolysis and application of biochar for removal of methylene blue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Aris, Noor Aiysah (2019) Kinetic properties on supercritical carbon dioxide extraction of charantin from Momordica charantia L. with co-extractant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Fezarudin, Fatin Zulaikha (2019) Knowledge discovery for halal human capital and halal training programs in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Aliman, Mustoffa (2019) Konflik kepelbagaian guna tanah dalam pelaksanaan pelan Koridor Ekologi Central Forest Spine di Negeri Perak. Masters thesis, Universiti Teknologi Malaysia.

Roslan, Nur Zatul Iradah (2019) Labisia pumila loaded flexible liposomes for enhancement of collagen synthesis in reconstructed human skin and its penetration pathway. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Pengiran Piut, Pengiran Harizan (2019) Land governance in Brunei Darussalam. PhD thesis, Universiti Teknologi Malaysia.

Abd. Kadir, Helmi (2019) Landslide movement detection using unmanned aerial vehicle (UAV) photogrammetry. Masters thesis, Universiti Teknologi Malaysia.

Mohammadi, Ayub (2019) Landslide susceptibility mapping using remote sensing data and geographic information system-based algorithms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bidi, Nur Khalilah (2019) Least squares variance component estimation for surveying network adjustment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mahamud, Zainab (2019) Length and order of fuzzy autocatalytic set of a pressurized water reactor. Masters thesis, Universiti Teknologi Malaysia.

Thong, Jia Wen (2019) Life cycle assessment of energy and CO2 emissions from cast in-situ and industrialised building systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ashraf, Muhammad Waqar (2019) Lightpath routing for disaster survivability in optical networks. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Ibrahim, Abdikarim (2019) Lightweight IoT platform for rapid application development and deployment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Norman, Noorafiza (2019) Linked data approach in accessing geospatial big data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Hanafiah, Ahmad Iqmal Haqim (2019) Liveability of high rise affordable housing in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Khalid, Muhammad Harris (2019) Low power cmos potentiometric circuit design for label-free DNA detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Yusoff, Nurul Nabilah (2019) The macroeconomic and microeconomic factors of residential property prices in Nusajaya. Masters thesis, Universiti Teknologi Malaysia.

Borhamdin, Suhaila (2019) Magnetically recoverable biosynthesised gold nanoparticles as catalysts for oxidation of benzyl alcohol and reduction of 4-nitrophenol. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zain, Norliza (2019) Magnetohydrodynamics effects on generalised power law fluid model of blood flow in a stenosed bifurcated artery. Masters thesis, Universiti Teknologi Malaysia.

Mohammed Hatem, Zaid (2019) Management and maintenance of the welfare facilities at construction sites in Iraq. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Jamal, Muhammad Adib (2019) The management of industrialized building systems (ibs) projects using radio-frequency identification (rfid) technology. Masters thesis, Universiti Teknologi Malaysia.

Isa, Alhaji Mustapha (2019) Mapping of forest water-stressed changes based on normalized difference water index (NDWI) during 1998-2018 using multi-temporal landsat data. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Ali, Faizura Haneem (2019) Master data management adoption model in Malaysia local government. PhD thesis, Universiti Teknologi Malaysia.

Koo, Meng Lian (2019) Mathematical modelling of blood flow in a catheterized artery with time variant multiple stenoses. Masters thesis, Universiti Teknologi Malaysia.

Kamarunzaman, Noor Farris Aqmal (2019) Measuring the suitability index of transit oriented development in KL Sentral Station and Bandar Tasek Selatan Station. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Harun, Mohd. Safwan (2019) Mechanical properties and short-term performance of sulphate resistance of effective microorganisms-fly ash geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harun, Mohd. Safwan (2019) Mechanical properties and short-term performance of sulphate resistance of effective microorganisms–fly ash geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mahmad Raseh, Nur Balqis Idayu (2019) Mechanical properties of concrete incorporating spent abrasive waste. Masters thesis, Universiti Teknologi Malaysia.

Wong, Keng Yinn (2019) Medical staff's movement effects on particle counts in a surgical zone. PhD thesis, Universiti Teknologi Malaysia.

Nor Azmi, Nur Farhah Adlina (2019) Mesoporous alumina membrane incorporated CuO/CeO2 catalyst for oily wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamad, Muhammad ‘Arif (2019) Metaheuristic approach on feature extraction and classification algorithm for handwrittten character recognition. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Rezayee, Maqsood (2019) Methods for improvement of informal settlement in Kabul City, Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Zinalibdin, Mohamad Raizul (2019) Micro-solid phase extraction methods based on molecularly imprinted polymer for determination of toluene metabolites in urine samples. PhD thesis, Universiti Teknologi Malaysia.

Omar, Roslan (2019) Microalgae disintegration in raw water as pre-treatment using sonic wave. PhD thesis, Universiti Teknologi Malaysia.

Maha, Raihana Rozan (2019) Microplastic contamination in green mussel aquaculture at straits of Johor. Masters thesis, Universiti Teknologi Malaysia.

Selvaraju, Raghuraman (2019) Microstrip patch beamforming linear antenna array with complementary split ring resonator for fifth generation applications. PhD thesis, Universiti Teknologi Malaysia.

Adamu, Ibrahim Aliyu (2019) Microwave properties of bitumen modified with waste cooking oil (WCO). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Dahri, Muhammad Hashim (2019) A millimeter wave reflectarray antenna with tilted side patch elements for fifth generation communication systems. PhD thesis, Universiti Teknologi Malaysia.

Hashim, Mohd. Nizar (2019) Mobile indoor laser scanning for 3D strata registration purposes based on indoorgml. Masters thesis, Universiti Teknologi Malaysia.

Lokman, Muhamad Amir Afiq (2019) Model berstruktur kompetensi bagi pengurus projek bangunan hijau di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Tahira, Mufeeza (2019) Model for effective bus rapid transit ridership based on users' perception. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Elthrif, Asma Ali Mosa (2019) Model for technological aspect of e-learning readiness in higher education institutions. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Ali Mosa Elthrif, Asma (2019) Model for technological aspect of e-learning readiness in higher education institutions. PhD thesis, Universiti Teknologi Malaysia.

Amankwah, Oti (2019) A model for the relationship between use satisfaction of healthcare facilities management and core healtcare business. PhD thesis, Universiti Teknologi Malaysia.

Amankwah, Oti (2019) A model for the relationship between user satisfaction of healthcare facilities management and core healtcare business. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Jaafar, Hazriq Izzuan (2019) Model reference command shaping for control of a multimode double-pendulum overhead crane. PhD thesis, Universiti Teknologi Malaysia.

Shaari, Nursyamimi (2019) Model struktur amalan terbaik faktor kejayaan kritikal sistem pengurusan kualiti projek pembinaan. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Ali, Hussam Mohamed Bashir (2019) Model-based semi-automated test case generation approach using UML diagrams. Masters thesis, Universiti Teknologi Malaysia.

Zulkeflee, Ilya Farhana (2019) Modelling and forecasting flight delay at Kuala Lumpur International Airport using hybrid arima-garch model. Masters thesis, Universiti Teknologi Malaysia.

Maalim, Kauthar Yussuf (2019) Modelling and simulation of adsorption process for removal of CO2 from natural gas in an offshore platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Tay, Hui Shien (2019) Modelling hand, foot and mouth disease in Malaysia using generalized linear models. Masters thesis, Universiti Teknologi Malaysia.

Azmi, Muhamad Hanif (2019) Modelling monthly rainfall in Peninsular Malaysia using tweedie distribution. Masters thesis, Universiti Teknologi Malaysia.

Lee, Le Ming (2019) Modelling of ground penetrating radar backscatter for water pipeline leakage detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Wan Mohamad, Wan Munirah (2019) Modelling of multivariable systems using advance fuzzy arithmetic. PhD thesis, Universiti Teknologi Malaysia.

Kong, Ching Yee (2019) Modelling the dependence structure between two rainfall stations in Johor. PhD thesis, Universiti Teknologi Malaysia.

Awg Zaini, Dyg Khairunnisa (2019) Modification of carbon black using polyethylenimine (PEI) for aspirin removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Umar Sidik, Hayatu (2019) Modification of coconut shells by polyether ether ketone for high-presure adsorption of methane and natural gas. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Razak, Aisyah (2019) Modulation strategy for new asymmetrical multilevel inverter topology using nearest dc level modulation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Abd. Karim, Nur Farah Nadia (2019) The morphology and structural properties of silicon carbide quantum dots grown by very high frequency plasma enhanced chemical vapour deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Amin, Nor Hidayah (2019) Morphology, structural and electrical properties of nickel-oxide-yttria-stabilized-zirconia thin film for solid oxide fuel cell electrode application. Masters thesis, Universiti Teknologi Malaysia.

Md. Ali, Mohamad Amin (2019) Motivation of voluntourists to Juara Turtle Project, Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yong, Kelvin Hong Chien (2019) Multi area economic dispatch using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Buba, Mohammed (2019) Multi-node parallelization performance of first-principles calculations. Masters thesis, Universiti Teknologi Malaysia.

Khan, Muhammad Murad (2019) Multiple social network integration framework for recommendation across system domain. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Idris, Ahmad Muzammil (2019) Multiple-resources targeting using water-energy nexus cascade analysis and mathematical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Boyou, Natalie Vanessa (2019) Nanosilica-enhanced water-based drilling mud for hole cleaning in inclined wells. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Rosli, Nur Ayshah (2019) Nanostructured lipid carrier loaded with zingiber officinale and Zingiber zerumbet oil for induction of lipolysis in subcutaneous skin layer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Alkhanbashi, Nabahan Hamood Ali (2019) Natural products of gum arabic and frankinences as green inhibitors for mild steel corrosion in acidic medium. Masters thesis, Universiti Teknologi Malaysia.

Mat Arifin, Fazni (2019) Negotiation approach at agenda setting stage of the proposed national halal policymaking process. PhD thesis, Universiti Teknologi Malaysia.

P. Mosar, Nur Faizah (2019) Next generation intelligent completions for multi-stacked brownfield in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Gan, Zhi Han (2019) Non-linear analysis of RC bridge slab on prestressed beams in transverse direction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Lanus, Supardi (2019) Notice of intention to claim for loss and expense. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alpandi, Amni Haslinda (2019) Numerical simulation on foam stability and electrokinetic potential during foam injection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mostakim, Marliah (2019) Numerical solution of keller-segel equation using finite difference method and method of lines. Masters thesis, Universiti Teknologi Malaysia.

Kok, Lei Bing (2019) Odor reduction and mechanical properties of natural rubber latex/sepiolite films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdulfattah, Ghassan Marwan (2019) Offline signature verification using ordinal structure fuzzy logic and integrated features based on single signature. PhD thesis, Universiti Teknologi Malaysia.

Tan, Gloria Jennis (2019) Offline text-independent Chinese writer identification method with two-tier image retrieval. PhD thesis, Universiti Teknologi Malaysia.

Wong, Kar Chun (2019) olyamide thin film nanocomposite membrane incorporated with carbon nanotubes/graphene oxide for carbon dioxide removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Zamri, Siti Aisyah Zai (2019) On The solution of blasius problem by combined adomian decomposition method-integral transforms. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Abdeen, Abdullah Adelhttp://dms.library.utm.my:8080/vital/access/manager (2019) On-line recognition of developing control chart patterns performance of concrete pavement containing coal bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammed Bello, Abubakar (2019) On-line recognition of developing control chart patterns quarter wave stack model simulation for optical edge filter design using octave. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muhammad Zaki, Muhammad Azam (2019) One step potassium hydroxide activated and calcium oxide doped carbon catalyst for transesterification of rice bran oil. Masters thesis, Universiti Teknologi Malaysia.

Lee, Lin Zhi (2019) One-step synthesis and adsorptive characteristics of composite magnetic activated carbon for rhodamine B removal. PhD thesis, Universiti Teknologi Malaysia.

Sualim, Sherolwendy (2019) Ontology based negative selection approach for mutation testing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ali, Sedig Ahmed Babikir (2019) Ontology-based conceptual model for quality assurance in higher education. PhD thesis, Universiti Teknologi Malaysia.

Ramli, Muhammad Rozaid (2019) Operational carbon emission and economic analysis of green technology implementation at rest and service area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Francis, Ziad Ayman Bashir (2019) Operationalisation of transit oriented development standards and requirements in Johor Bahru City Centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mahmood, Sajid (2019) Optimal cloud topographic model by statistical evaluation for large scale mapping using geodetic terrestrial laser scanner. PhD thesis, Universiti Teknologi Malaysia.

Liu, Wen Hui (2019) Optimal design and scheduling of an integrated centralized and decentralized energy generation system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Lukman, Muhamad Faez (2019) Optimisation of a condensate recovery system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Segar, Boshkiran (2019) The optimization of electric buses in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Rashid, Siti Nor Azlina (2019) Optimization of enzymatic hydrolysis condition for amino acid and taurine production from Thunnus tonggol viscera as fish protein hydrolysates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Kandiyil, Subeesh Kunhi (2019) Optimization of fermentation strategy for enhanced production of thermostable xylanase by recombinant Escherichia Coli. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Zakaria, Noorzetty Akhtar (2019) Optimization of microwave-assisted extraction of pectin from pineapple peel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Sasitharan, Selva Nathan (2019) Optimization of pressed palm mesocarp fiber residue oil hexane extraction plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohd. Nashiruddin, Noor Idayu (2019) Optimization of pretreatment and enzymatic hydrolysis of pineapple leaves fiber for reducing sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wong, Lee Peng (2019) Optimization of roselle seed in supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Khan, Muhammad Shehryar (2019) Optimizing exploration parameter in dueling deep Q-networks for complex gaming environment. Masters thesis, Universiti Teknologi Malaysia.

Abubakar, Idrissa (2019) Optimum adaptive coding and modulation characteristics on broadband satellite communication system in tropical Nigeria. PhD thesis, Universiti Teknologi Malaysia.

Kusni @ Sulikan, Hasliana (2019) Organizational talent management initiatives and practices in construction industry. Masters thesis, Universiti Teknologi Malaysia.

Safaei, Mahmood (2019) Outlier detection in wireless sensor network based on time series approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Md. Huzir, Nurhamieza (2019) Palm oil mill effluent treatments and biomethane production using rice husk ash and palm kernel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Azmi, Musfirah (2019) Particle depositions in multi stage liquid impinger as simplified lung model using computational fluid dynamic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohd. Ali, Siti Aishah (2019) Particle size analysis on ginger essential oil nanoemulsions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Yusof, Nur Hidayah (2019) Pattern of flooding in Kelantan due to extreme rainfall and tidal phenomenon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ahmed, Tufail (2019) Pedestrian crossing level of service (PCLOS) model for promoting safe street crossing in urban areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dahalan, Mohamed Akmal (2019) Pemakaian Seksyen 116(1)(A) Kanun Tanah Negara 1965 bagi isu tanah berimilik terbiar. Masters thesis, Universiti Teknologi Malaysia.

Morsit, Farhana Lina (2019) Pembatalan dokumen hakmilik di peringkat pendaftar dan pentadbir tanah. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Arshad, Mohd. Adib (2019) Penambahbaikan pelaksanaan cukai petak di Selangor. Masters thesis, Universiti Teknologi Malaysia.

Ngadiman, Norshafadila (2019) Pencapaian proses permohonan dan pemilikan dalam dasar perumahan mampu milik Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Abdul Khalid, Syafril Idzwan (2019) Penentuan bayaran pajakan stratum bagi pembangunan ruang bawah tanah rizab. Masters thesis, Universiti Teknologi Malaysia.

Che Kasim, Asmma' (2019) Pengaruh elemen persekitaran bandar terhadap transaksi harta tanah kediaman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Kamarulzaman, Norazila (2019) Pengaruh suku kaum jawa dan bugis dalam membentuk kepelbagaian seni bina Johor. Masters thesis, Universiti Teknologi Malaysia.

Samsuri, Mohd. Fadzilah (2019) Pengurusan perubahan kerja bagi kontrak pembinaan projek kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdullah, Muhammad Nazri (2019) Pengurusan sisa pepejal di kawasan manjoi, Ipoh bagi tempoh pelaksanaan percubaan penguatkuasaan Akta 672. Masters thesis, Universiti Teknologi Malaysia.

Mohamed Halmi, Amir Fadli (2019) Penjenamaan semula penguatkuasaan permit pemindahan bahan batuan melalui inisiatif penguatkuasaan berasaskan inovasi. Masters thesis, Universiti Teknologi Malaysia.

Che Azhar, Nurmaziatul Akmal (2019) Penyelesaian tunggakan cukai tanah hakmilik syarikat. Masters thesis, Universiti Teknologi Malaysia.

Misri, Mohd. Zaime (2019) Penyenggaraan jalan luar bandar di Daerah Petaling. Masters thesis, Universiti Teknologi Malaysia.

Ali, Mohamad Azal Fikry (2019) Peranan pusat perkhidmatan luar bandar di Zon Pelancongan Khas Negara. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Redzuan, Azah Farizah (2019) Perception of the contractors on collaborative relationship in pan Borneo project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammad Meseztor, Mohd. Aizuddeen (2019) Perception of young generation on the importance and performance of gamification in tourism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Wong, Mikkay Ei Leen (2019) Perceptions of traning on affective commitment and intention to stay. PhD thesis, Universiti Teknologi Malaysia.

Anjomshoae, Ali (2019) Performance assessment scheme for disaster relief operations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Nagayan, Buwaneswari (2019) Performance evaluation of surfactant enhanced nanomaterial as efficient water based mud additive. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdelhakim, Mesloub (2019) Performance of office building integrated photovoltaic for windows under semi-arid climate in Algeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Noruzman, Ainul Haezah (2019) Performance of polymer modified concrete incorporating polyvinyl acetate waste. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Aljabali, Rasha Najib Ahmed Abdullah (2019) Personalized gamified learning based on learning style. Masters thesis, Universiti Teknologi Malaysia.

Goh, Cheow Kat (2019) Phosphorescent trinuclear gold (I) pyrazolate complex bearing photochromic azobenzene side-chains. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tahir, Beenish (2019) Photocatalytic bireforming of methane over silver-lanthanum modified graphitic carbon nitride with titania nanocomposite in monolith photoreactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wahab, Wahyuni (2019) Physical and chemical properties of recycled bitumen incorporating rejuvenator. Masters thesis, Universiti Teknologi Malaysia.

Syed Yaacob, Syariffah Nurathirah (2019) Physical, structural and optical properties of terbium doped zinc phosphate glasses embedded with copper oxide nanoparticles. Masters thesis, Universiti Teknologi Malaysia.

Saari, Nur Syazwani (2019) Planning for integrated bus stop using space syntax analysis. Masters thesis, Universiti Teknologi Malaysia.

Imuetinyan, Happiness (2019) A plant-based natural surfactant for enhanced oil recovery application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Lee, Wah Hock (2019) Poly(3-hydroxybutyrate) by recombinant phaeodactylum tricornutum via light-emitting diode cultivation and microwave-assisted extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wong, Kar Chun (2019) Polyamide thin film nanocomposite membrane incorporated with carbon nanotubes/graphene oxide for carbon dioxide removal. PhD thesis, Universiti Teknologi Malaysia.

Zahri, Khalisah (2019) Polysulfone/graphene oxide mixed matrix hollow fiber membrance for carbon dioxide removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Xiong, Lanping (2019) Post contract risk analysis for chinese contractors in malaysia under one belt one road initiative. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmed Damoom, Mohammed Moftah (2019) Potential nuclear power plant sites selection using multicriteria decision analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Javed (2019) Power conditioning for energy systems in green buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Syed Nasir, Syed Norazizul (2019) Power loss and harmonic minimizanon at distribution system with electric vehicle by passive filter using modified lightning search algorithm. PhD thesis, Universiti Teknologi Malaysia.

Abd. Jalil, Ashrif (2019) Power quality improvement using Unified Power Quality Conditioner (UPQC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

A Gani, Afifa Safira (2019) Prediction tool for structural condition in gravitational flow sewer pipe. PhD thesis, Universiti Teknologi Malaysia.

Aie, Nyemas Dewi Pramita (2019) Preliminary assessment on land surface temperature map and slope stability at Jelutong landfill. Masters thesis, Universiti Teknologi Malaysia.

Alis, Adilah (2019) Preparation and characterization of halloysite nanotubes filled palm kernel oil based polyurethane foam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamad Aseri, Nur Syuhadha (2019) Preparation and characterization of polylactic acid modified polyvinylidene fluoride hollow fiber membranes with enhanced water flux and antifouling resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Rasol, Nurfadilah (2019) Preparation and characterization of polystryrene/poly(butylacrylate methacrylate acid) core-shell nanostructured films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Elias, Munirah (2019) Preparation of polypyrrole and polypropylene-grafted-polypyrrole by using ultrasonic irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Yahya, Norsyazwani (2019) Preparation, characterization and performance evaluation of lanthanum orthoferrites for humic acid removal via photocatalysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Hamzat, Bashir Aderemi (2019) Preparation, modification and characterization of adsorbents from palm fatty acid distillates (PFAD) for dye removal from aqueous solutions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Hamzat, Bashir Aderemi (2019) Preparation, modification and characterization of adsorbents from palm fatty acid distillates for dye removal from aqueous solutions. PhD thesis, Universiti Teknologi Malaysia.

Masud, Farhan (2019) Prioritization-based adaptive emergency traffic medium access control protocol for wireless body area networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Muhammad Anwar, Muhammad Anwar (2019) A priority-based energy efficient multi-hop routing protocol with congestion control for wireless body area network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Masran, Siti Aisyah (2019) Privacy factors of house frontages in Malaysian terrace houses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ahmad Zahari, Samahah Solehah (2019) Privacy preserving data mining using anonymization and K-means clustering on labor dataset. Masters thesis, Universiti Teknologi Malaysia.

Hafiz, Hazirah (2019) A process integration method of integrated solar photovoltaic water purification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Lim, Shin Yuan (2019) Product removal strategy and fouling mechanisms for cellulose hydrolysis in an enyzmatic membrane reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Irwan Shah Lee, Nor Sahslin (2019) Production and characterization of uricase from pseudomonas otitidis strain SN1 isolated from a hot spring. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lam, Chi Yong (2019) Production of aerobic granular sludge in sequencing batch reactor for the treatment of palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haron Narashid, Nur Husna (2019) Production of cysteine and methionine by selected proteolytic bacteria from chicken slurry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hanapi, Siti Zulaiha (2019) Production of efficient lignin degrading enzymes by newly isolated Cerrena species. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abba, MUstapha (2019) Production, optimization and membrane diffusion studies of nanocellulose obtained from gluconacetobacter sp. bczm 1. PhD thesis, Universiti Teknologi Malaysia.

Zainudin, Farah Liyana (2019) The profile of breaches of contract in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Peh, Ruoh Fu (2019) Profile of cases relating to CIPAA 2012 reffered to court. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Fadzil, Nur Fadhila (2019) Profiling of adulterant in tongkat ali herbal product using dna barcoding in combination with high resolution melting analysis. Masters thesis, Universiti Teknologi Malaysia.

Thangathulai, Christie (2019) Profiling of summary judgement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Sarobo, Zulaikha (2019) Profiling the diversity of morphological traits for future Malaysian breeding programme in capsicum genetic resources. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tukimat, Nur Mardhati Nabila (2019) Programming environment for teaching introductory programming for secondary school. Masters thesis, Universiti Teknologi Malaysia.

Abdul Kadir, Azah (2019) Project integrated management system framework for upstream oil and gas contractors. PhD thesis, Universiti Teknologi Malaysia.

Mustapha, Rohani (2019) Properties of montmorillonite filled epoxy /acrylated epoxidized palm oil hybrid kenaf/glass fiber composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ng, Mei Ling (2019) Protein expression profiling of Orthosiphon aristatus (Blume) Miq and molecular dynamics simulation of transketolase with antidiabetic potential. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramachandran, Heeravathy (2019) Protein profile and antioxidant activity of Moringa oleifera seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sarwar, Farhan (2019) Psychological capital, contextual demands and resources, work-family linking mechanisms and satisfaction with work-family balance in academia of Pakistan. PhD thesis, Universiti Teknologi Malaysia.

Teo, Seng Chong (2019) Purification and characterisation of recombinant xylanase from Roseithermus Sacchariphilus strain RA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Hanafi, Muhammad Arif Haikal (2019) Qualitative screening of pharmaceuticals and personal care products in water and farm green mussels at straits of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Meor Ahmad, Mismisuraya (2019) Quantitative models for predicting antioxidant capacity in herbs based on molecular structures and compositions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ruslan, Muhammad Khairul (2019) Rangka kerja pemantapan budaya keselamatan di organisasi pembinaan perumahan teres. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Mohd. Yusuf, Esty (2019) Re-evaluation of lightning protection system to government building in Sarawak using simplified risk analysis and rolling sphere method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohebbi, Mostafa (2019) Reactivity controlled compression ignition combustion in a light duty diesel engine using alternative fuels. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Abdullahu, Muhamet (2019) Readiness and intention towards knowledge sharing and successful collaboration between university and industry. PhD thesis, Universiti Teknologi Malaysia.

Mahat, Katijah (2019) Reconstruction of Nannochloropsis oculata protein-protein interaction network for growth and triacylglycerol production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed Noah, Norul Fatiha (2019) Reduction of chromium (VI) to chromium (III) using continuous emulsion liquid membrane. PhD thesis, Universiti Teknologi Malaysia.

Zharani, Erna Nuralia (2019) Reka bentuk mukaan bangunan awam ke arah pembentukan seni bina bercirikan identiti Kebangsaan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Bhatti, Mansoor Nazir (2019) Relationship between big five personality traits academic performance and academic stress among postgraduate students in Pakistan. PhD thesis, Universiti Teknologi Malaysia.

Audu, Maiyaki Sani (2019) Relationship between housing condition, soldiers social life and morale in Coral Barracks, Nigeria. Masters thesis, Universiti Teknologi Malaysia.

Abd. Rahman, Mohd. Heidi Buyong (2019) Relationship between job satisfaction and job performance of a shipbuilding company in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Fakhruddin, Khalid Ahmed (2019) Reliability assessment and calibration of ISO-LRFD factors for minimum facility offshore platfrom in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hii, Kheng Wuong (2019) Removal of aspirin and paracetamol from aqueous solution by using tea waste modified PEI adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Shamsudin, Mohamad Iskandar (2019) Removal of aspirin from aqueous solution using activated carbon from Kenaf fiber as adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdo Allozy, Hamzah Gamal (2019) Removal of copper ions from aqueous solutions using poly(vinylbenzyl chloride). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tang, Shu Hu (2019) Removal of malachite green by mixture of textile sludge and sawdust chemically produced activated carbon. PhD thesis, Universiti Teknologi Malaysia.

Muhammad Arfat, Muhammad Arfat (2019) Reversible moisture damage in asphalt mixture. Masters thesis, Universiti Teknologi Malaysia.

Mat Shaari, Nursyawalini (2019) Revisit a mature oil field's facilities to extend its economic life. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mat Shaari, Nursyawalini (2019) Revisit a mature oil field’s facilities to extend its economic life. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Che Abd. Aziz, Ahmad Syarifuddin (2019) Risk assessment of mechanical workshop at Politeknik Sultan Azlan Shah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Nagarajan, Logeswaren (2019) Risk assessment practices in project scheduling to reduce potential delays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Tabatabaee, Sanaz (2019) Risk assessment tool for implementing building information modelling in industrialised building system project. PhD thesis, Universiti Teknologi Malaysia.

Amat Bakri, Nurul Khalida (2019) Risk management of design and build project. Masters thesis, Universiti Teknologi Malaysia.

Mohammed, Olatunji Obalowu (2019) Robust approach for capacity benefit margin computation with wind energy consideration for large multi-area power systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Sanil, Hishan Shanker (2019) The role of corporate social responsibility for flood mitigation among Malaysian companies. PhD thesis, Universiti Teknologi Malaysia.

Gul, Ambreen (2019) Role of industry linkages in employability among Pakistani University students. PhD thesis, Universiti Teknologi Malaysia.

Ahmad, Shabir (2019) The role of Islamic corporate social responsibility and mediating effect of innovation capability on corporate sustainable longevity in family firms. PhD thesis, Universiti Teknologi Malaysia.

Ratin, Nurul Fatimah (2019) Safety measures in construction logistics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohmad @ Harun, Noor Hafiza (2019) Scaling up of the processes for the production of optimized eurycoma longifolia extracts using dimensional analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Qamar, Shaista (2019) Screening for salt tolerance in maize and comparative evaluation on chemical composition and mineral nutrients. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ishanch, Qutbudin (2019) Seasonal drought pattern changes due to climate variability in Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghoreishi, Seyedmohsen (2019) Secure pairing-free two-party certificateless authenticated key agreement protocol with minimal computational complexity. PhD thesis, Universiti Teknologi Malaysia.

Al-Hinai, Salim Mohammed Abdullah (2019) Securing passive optical network against signal injection attack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Fung, Alex Hui Siang (2019) Seismic fragility assessment of tall concrete wall structures in Malaysia under far-field earthquakes considering mass irregularity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwjim, Kotaiba (2019) Seismic fragility curves for tall wall concrete buildings in Malaysia under near-field earthquakes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Fathol Karib, Siti Aisyah (2019) Seismic fragility of tall concrete wall structures in Malaysia under far-field earthquakes. Masters thesis, Universiti Teknologi Malaysia.

Khairul Anuar, Mohamad Amir Syafiq (2019) Selection factor to bid or not to bid for extra low voltage system (ELV) project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Shukri, Muhamad Shardiq (2019) Self-healing geopolymer mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Umar, Mahmood (2019) Sentiment analysis of student's opinion on programming assessment using naive bayes algorithm on small data. Masters thesis, Universiti Teknologi Malaysia.

Baharudin, Nur Azlin (2019) Settlement assessment of soft soil reinforced by partially penetrated by soil cement column. Masters thesis, Universiti Teknologi Malaysia.

Abas, Farah Nadia (2019) Shariah compliant best practice tenancy management framework for commercial Waqf properties. PhD thesis, Universiti Teknologi Malaysia.

Sailan, Roslina (2019) Shariah-compliant airport framework at KL International Airport. PhD thesis, Universiti Teknologi Malaysia.

Abdul Wahid, Al-Shafiq (2019) Ship availability oriented contract management model for in-service support contracts of naval vessels. PhD thesis, Universiti Teknologi Malaysia.

Ismail, Abbas (2019) Signal peptide modification and signal peptide peptidase effect on cyclodextrin glucanotransferase excretion and cell lysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Tiong, Chai Ping (2019) The significance of property type strategy of malaysian real estate investment trust. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Lazif, Nur Fajrina (2019) Silver-montmorillonite modified titanium dioxide assisted carbon nitride nanocomposites for photocatalytic hydrogen production through water splitting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wong, Meng Siang (2019) Similitude relationship for circular concrete filled steel tube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Al-Dhaqm, Arafat Mohammed Rashad (2019) Simplified database forensic investigation using metamodeling approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Abdullah, Dhiya Shabana (2019) Simulation of polymer alternating gas (PAG) flooding in a synthetic highly permeable reservoir model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mangsor, Aneez Syuhada (2019) Single mode modified tapered structure with graphene oxide/polyvinyl alcohol composite layer for relative humidity sensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pui, Yvonne (2019) Slope stability assesment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia.

Yvonne, Pui (2019) Slope stability assessment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Saeed Fadul, Naglaa Abdel Lateef (2019) Social media and knowledge integration based emergency response performance model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Yahaya, Nor Ashikin (2019) Soft ground improvement using pile embankment. Masters thesis, Universiti Teknologi Malaysia.

Chang, Teck Leong (2019) Soil slope remediation works using soil nail. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rajendaran, Elayarasan (2019) Solar thermal implementation for an energy efficient commercial building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Al Farsi, Khalifa Ali Abdallah (2019) Solution of bacteria- surface decontamination model by using separation of variables. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yusop, Azalia (2019) Spatial pattern, transportation, and air quality nexus in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Daud, Siti Zaleha (2019) Spatial-based socio-economic model for assessing the impact of urban riverfront development. PhD thesis, Universiti Teknologi Malaysia.

Hoo, Poh Ying (2019) A spatial-economic optimisation of waste to biomethane in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Sediqi, Mohammad Naser (2019) Spatio temporal pattern in the changes in availability and sustainability of water resources in Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamad, Nurhafiza (2019) Spectroscopic properties of odd-mass rare-earth nuclei within a mean-field approach with time-reversal symmetry breaking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Harun, Mazlan (2019) Stability analysis for slope rehabilitation works at km424.80 South bound, North South expressway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Nor Azlan, Mohd. Nor Azlan (2019) Statistical evidence to support the utilization of 21 autosomal short tandem repeats loci for human identification in Malaysian populations. Masters thesis, Universiti Teknologi Malaysia.

Tan, Ru Shien (2019) Steam reforming of gasified biomass tar for hydrogen production over nickel- dolomite based catalyst. Masters thesis, Universiti Teknologi Malaysia.

Tan, Ru Shien (2019) Steam reforming of gasified biomass tar for hydrogen production over nickel-dolomite based catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Tan, Ru Shien (2019) Steam reforming of gasified biomass tar for hydrogen production over nickel–dolomite based catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Jamil, Mohd. Elmi Fauzan (2019) Strategi pemberimilikan tanah dalam konteks penyelesaian setinggan. Masters thesis, Universiti Teknologi Malaysia.

Alwaely, Ammar Mohammed Oda (2019) Strategy of minimizing delay in public construction projects through implementation of electronic procurement system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Lee, Soo Eu (2019) Street lighting using hybrid solar/wind system for Balai Cerapan UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Ishak, Abdah (2019) Stres kerja, personaliti big five, kepuasan kerja dan prestasi kerja staf sokongan. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Apandi, Nazirah (2019) Structural performance of repaired circular reinforced concrete columns using steel strapping tensioning technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammed Aliyu, Aliyu (2019) Structural, optical and Judd-Ofelt parameters study on samarium and dysprosium ions doped calcium sulfate and magnesium sulfate ultra-phosphate glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasmuni, Nur Farhana (2019) Structure and electrical conductivity of polymer based graphene-carbon nanotubes composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Msuku, Gryson Kondwani Chibwatiko (2019) The subsidy fertilizer supply chain challenges in Malawi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Rezaian, Shahab (2019) Success factors for hospital information system implementation in public university hospitals. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Dan, Nurzafirah (2019) Success factors of women entrepreneurship in tourism business in Langkawi Island, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Raja Sulaiman, Raja Norimie (2019) Supported liquid membrane process for nickel removal from electroplating wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Umar, Abdulhamid (2019) Supramolecular organogel with aggregation-induced emission and liquid crystal properties from 1,3,5-triazine 2,4,6-tricarboxamide for sensing metal ions and colour tunable materials. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yeng, Min Yi (2019) Surface display of endoglucanase and β-glucosidase using ice nucleation protein a from Erwinia ananas on Escherichia coli. Masters thesis, Universiti Teknologi Malaysia.

Ishak, Rozelawati (2019) Sustainability criteria for road maintenance work in Malaysia using pHJKR rating tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein Sabki, Mirza (2019) Sustainability evaluation framework for food waste composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Raj, Dayalan Rainoo (2019) Sustainable assessment of operational non-tolled roads in Malaysia using pH JKR rating tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Liew, Chia Pao (2019) A sustainable framework for assessing the engineering accreditation council’s programme outcomes. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zekri, Mohammad Muzzammil (2019) Switching regime of Malaysian listed property companies within pan-Asian public real estate markets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Abdul Rahman, Hilmi (2019) Synergistic formulation for reactive dyes extraction using benign based emulsion liquid membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Nordin, Abu Hassan (2019) Synthesis and characterisation of magnetic-polyethyleneimine-cellulose adsorbent for reactive black 5 dye removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mat Isa, Naurah (2019) Synthesis and characterisation of pentacosa-10,12-diynoic Acid – poly (styrene-butyl acrylate) latex for gamma Radiation indicator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Azmi, Ahmad Aiman (2019) Synthesis and characterization of amine-impregnated mesoporous ceria nanoparticles for carbon dioxide capture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Wan Mohd. Zawawi, Wan Nurul Izyani (2019) Synthesis and characterization of biocers as high-performance biosorbents for dye removal process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Hatta, Mohd. Hayrie (2019) Synthesis and characterization of carbon nitride with tunable properties for photocatalytic degradation of phenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Khalid, Nur Amanina (2019) Synthesis and characterization of elastomeric silicone urethane acrylate hydrogels via ultraviolet light-emitting diode photopolymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Norazmi, Farah Shahirah (2019) Synthesis and characterization of hydrophobic silica nano particles as anti-reflective coating for photovoltaic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tariq, Usman (2019) Synthesis and characterization of injectable bone cement prepared from biphasic calcium phosphate extracted from lamb and bovine bones. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Thahe, Asad A. (2019) Synthesis and characterization of laser annealed nanoporous silicon-zinc oxide nanoclusters for ultraviolet photodetector application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shahul Hamid, Muhamed Yusuf (2019) Synthesis and characterization of nickel catalyst supported on porous silica oxide for carbon dioxide methanation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Azman, Muhammad Asyiq (2019) Synthesis and utilization of β-cyclodextrin modified chitosan for the adsorption of aspirin. Masters thesis, Universiti Teknologi Malaysia.

Sailan, Nurul Ashikin (2019) Synthesis of methacrylate- acrylamide based copolymer via reverse addition-fragmentation chain transfer polymerization with thiol- conjugation and thermoresponsive studies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Teng, Cheng Reen (2019) Techno-economic analysis of hybrid photovoltaic- generator-battery system in Bario Sarawak. Masters thesis, Universiti Teknologi Malaysia.

Ismail, Nur Hanis Najwa (2019) Teenage perception on interior design of public libraries. Masters thesis, Universiti Teknologi Malaysia.

Tajul Ariffin, Hamizah Liyana (2019) Termination of contract due to anticipatory breach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Khatibsyarbini, Muhammad (2019) Test case prioritization technique based on string distance metrics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Burhanuddin, Nurfarahin (2019) Thermal characterization and kinetics of oil palm biodiesel blends and its effect on engine combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Roslan, Husaini (2019) Thermal modelling of spent nuclear fuel pool storage during loss of external cooling system accident. PhD thesis, Universiti Teknologi Malaysia.

Selvan, Krishna Veni (2019) Thermoelectric power generation enhancement of microfabricated metal-based planar thermopiles through geometrical and device structure optimizations. PhD thesis, Universiti Teknologi Malaysia.

Pandhiani, Siraj Muhammed (2019) Three layer wavelet based modeling for river flow. PhD thesis, Universiti Teknologi Malaysia.

Razali, Rasidah (2019) Titania-polystyrene textile as phase boundary catalysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Buba, Simon Peter Gumgaro (2019) Towards the implementation of performance information procurement system in the Nigerian construction industry. PhD thesis, Universiti Teknologi Malaysia.

Mat Kiah, Hasimawaty (2019) Toxic species and particulate emissions from synthetic polymer fires. PhD thesis, Universiti Teknologi Malaysia.

Abu Hanifah Nok Man, Azimah (2019) The trace elements of chlorpyrifos and malathion pesticides on guava fruit using laser induced breakdown spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed, Syed Imroze (2019) Traffic aware routing algorithms for energy efficient optical-wireless access networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Wakat, Spencer Embong (2019) Traveling salesman problem approach for solving drug distribution using simulated annealing and Tabu search. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yusoff, Nurshuhada Amira (2019) Treatment of acetaminophen and acetylsalicylic acid by chicken bone based adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

AbdulKarim, Bala Isah (2019) Treatment of galvanic sludge in an arc thermal plasma reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ahmad, Imran (2019) Treatment of landfill leachate using modified anaerobic baffled reactor. Masters thesis, Universiti Teknologi Malaysia.

Bahari, Noraini (2019) Tree species composition and configuration based on squirrel behaviour pattern in selected Malaysian urban parks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Abdullah, Rohayu (2019) Tree species for urban parks and roadside based on carbon storage, sequestration and maintenance in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Kerk, Lee Chang (2019) Trust-region based methods for unconstrained global optimization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hairudin, Humaira (2019) Trusted follower model that influence purchase intention in social commerce. Masters thesis, Universiti Teknologi Malaysia.

Abdul Rauf, Abdul Rauf (2019) Trusted reasoning-role-based access control for cloud computing environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ang, Jing Jing (2019) Two-stages of thermal and photo curing reactive polymer network from bio-based precursors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yusmaidi, Nuridayu (2019) Ultrasound-assisted exraction of phytochemicals using response surface methodology in commercial Moringa oleifera Lam leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainal Abidin, Nur Syahidah (2019) Understanding the usage of whatsapp among academicians of higher learning institutions in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Zainudin, Arif (2019) Unethical conduct and corruption among Malaysian construction professional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muhamad, Ida Idayu (2019) Use of Bioactivator mixture for the composting process of empty fruit bunch. PhD thesis, Universiti Teknologi Malaysia.

Tasnim, Sutapa (2019) User behaviour experiences of Dhaka's public open space and design features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Tasnim, Sutapa (2019) User behaviour experiences of Dhaka’s public open space and design features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Anka, Nura Abubakar (2019) User readiness model of social media for learning among polytechnic students in Nigeria. Masters thesis, Universiti Teknologi Malaysia.

Niknejad, Naghmeh (2019) Users behavioural intention model of using smart wellness wearables in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Mohamad Ikubar, Mohamed Roslan (2019) Utilization of oil palm frond for enzyme and renewable feedstock production using solid state fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mazahar, Norazilan (2019) Validity issues of variation order in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ng, Jia Phui (2019) Vehicle logo classification using bag of word descriptor and support vector machine classifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Koh, Jung Hung (2019) Viability of commercial liquefied petroleum gas as drop-in refrigerant in air conditioning systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdullahi, Bashir (2019) Void avoidance energy efficient pressure-based opportunistic routing for underwater wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia.

Chin, Yong Ling (2019) Waiver of employer's termination right by doctrine of election. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Chin, Yong Ling (2019) Waiver of employer’s termination right by doctrine of election. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohd. Shaid, Mohd. Shafiq Hakimi (2019) Waste tyre powder-based activated carbons by Co2 activation for methylene blue and phenol removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ahmad Nazri, Amirul Amin (2019) Waste water treatment and electricity generation using immobilized bioanode in microbial fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mst. Kaniz Fatema, Mst. Kaniz Fatema (2019) Water quality assessment and trophic state classification of Tasik Ilmu, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

David George, Vincent Daniel (2019) Water wave propagation interaction patterns in forced Korteweg-de Vries using homotopy analysis method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

AlMeshehe, Muataz Watheq Sabri (2019) Waveguide-based Butler matrix beamforming network for millimeterwave applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Chieng, Hing Seng (2019) Wind power generation effect on economic load dispatch in power system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Makhtar, Siti Nurfatin Nadhirah (2019) Zeolite-A deposited on glass/yttria stabilized zirconia forward osmosis membrane for desalination application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohammed Bafaqeer, Abdullah Salem (2019) Zinc vanadium oxide coupled carbon nitride nanocomposite for photocatalytic carbon dioxide reduction to methanol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Lee, Wei Jie (2019) Zwitterion embedded thin film composite forward osmosis membrane for oily wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.