Universiti Teknologi Malaysia Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 532.

Abd. Khadir Jalani, Mohamad Azani (2018) Gold (I) pyrazolate complex with optical and liquid crystalline properties and fabrication on thin nanoparticle film composites as catalysts for reduction of 4-nitrophenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Nor, Muhamad Hanif (2018) Electricity generation by Pseudomonas aeruginosa ZH1 in microbial fuel cell using palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hadi, Muhamad Sukri (2018) Evolutionary swarm algorithm for modelling and control of horizontal flexible plate structures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Muhammad Noor Hazwan (2018) Hydrodynamic cavitation using orifice plate configurations and arrangements for tertiary treatment of palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Nur Athirah (2018) Phytochemicals and bioactivities of Piper Maingayi HK. F., P. Magnibaccum C.DC and P. Caninum Blume species. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khamsan, Nur Ezaan (2018) Synthesize of crumb rubber using pulsed laser ablation in liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nasrollahpour, Reza (2018) Characteristics of density current dynamics over rough channel beds. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

On, Shamsul (2018) Phytochemicals and bioactivities of Garcinia prainiana King and G. hombroniana Pierre. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zenian, Suzelawati (2018) Sequence of image enhancemant of flat electroencephalography using intuitionistic fuzzy set. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Deba, Abdulkarim Ali (2018) Biosugar production from oil palm mesocarp fiber using crude lignocellulosic degrading enzymes from rhizomucor pusillus AK2. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohamad Zuki, Ahmad Zulzhafri (2018) FPGA implementation of naive bayes classifier for network security. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jameran, Aminuddin (2018) Mechanical properties and deterioration severity of fibre reinforced concrete exposed to elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Tahrim, 'Aqilah (2018) Silicon nanowire arrays for thermoelectric power harvesting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hussin, Faisal (2018) Zinc oxide-carbon nitride and zinc oxide-reduced graphene oxide composite for photodegradation of phenol and hydrogen production from water. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kam, Chee Zhou (2018) Fluid dynamics and thermodynamics numerical modelling of self-healing fibre reinforced laminated composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusof, Khairunnisa (2018) Soil macronutrient detection based on visible and near-infrared absorption spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Leong, Choon Wei (2018) Design and analysis of a 2.5-GHz optical receiver analog front-end using geiger mode photodiode in a 0.13 μm CMOS process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ling, How Lie (2018) Exoproteome analysis of Bacillus lehensis G1 in ph regulation and starch utilization for screening of signal peptides for cyclodextrin glucanotransferase secretion in Escherichia coli. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Minjal, Marwan Nafea (2018) Frequency-controlled wireless passive microfluidic devices. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd.Taib, Mohd. Fikri Hilmi (2018) Comparative study on dielectric performance between vegetable-based and mineral-based oil under accelerated thermal ageing and loaded distribution transformer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Mustafa Khaleel (2018) Microstructures and properties of Ti-51at.%Ni, Ti-23at.%Nb and Ti-30at.%Ta shape memory alloys fabricated by microwave sintering for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roslan, Nurliana (2018) Meso-subtituted anionic metalloporphyrin catalysts immobilized on ionic liquid-functionalized mesoporous silica in oxidation of trimethylphenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Nor, Othman (2018) Penerapan seni bina Istana Lama Seri Menanti dalam reka bentuk bangunan Pejabat Daerah Seremban. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salem Bindhaiq, Salem Mohammed (2018) Spectrally efficient and low cost time and wavelength division multiplexed passive optical network systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Che Azmi, Siti Nadiah (2018) Fabrication and characterization of reduced graphene oxide/silicon back-to-back schottky diode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rashid, Siti Aishah (2018) Insights into the structure and functions of the alkaliphilic Bacillus lehensis g1 clpc protein in alkaline environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Nikmat Leong, Siti Asma' (2018) Rheological and stability properties of magnetorheological fluid with superparamagnetic maghemite nanoparticles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Siti Nurul Fasehah (2018) Characterization of a novel bacterial dehalogenase from cow dung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Isa, Siti Nurzulaiha (2018) X-band metamaterial absorber for anti-motion detector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zenian, Suzelawati (2018) Sequence of image enhancement of flat electroencephalography using intuitionistic fuzzy set. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Woon, Sheue Wen (2018) A high speed geiger mode photodiode gating circuit modelling using matlab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamaruzzaman, Zulfadli (2018) Low noise and low power ECG amplifier using cmos 0.13μm technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Nasir, Nor Fadilah (2018) Characterizations of gallium arsenide nanowires grown by buffer layer assisted magnetron sputtering technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Reyes, Charissa Delos (2018) Prediction of extinction ratio's temperature compensation table using neural network. Masters thesis, Universiti Teknologi Malaysia.

Abdul Adzis, Aiza (2018) SPD response to internal generated neutral to earth transient in low voltage system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Idris, Nurhidayah (2018) Prioritization of reputation loss factor subject to pipeline explosion from public perceptions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Hamid, Nurul Daiyana (2018) Deposition of reduced graphene oxide film using drop casting for flexible electronic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Rashid, Sabri (2018) Mechanistic and kinetics of carbon dioxide fixation in aerobic biogranules developed from palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tapsir, Zafirah (2018) Incorporation of bioactive collagen type I and biomineralised hydroxyapatite on polydopamine grafted stainless steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lim, Aik Siang (2018) Bioinformatics analysis and molecular cloning of an extracellular serine protease from acinetobacter baumannii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ali, Akhtar (2018) High performance simulation of drug release model and mass transport model by using hybrid platform. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Batumalaie, Kalaivani (2018) Isolation, overexpression and characterization of an alkaline˗stable lipase KV1 from acinetobacter haemolyticus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Halim, Farah Syuhada (2018) Carbon-containing titania on stainless steel by high voltage powder spray coating and its adhesion phenomena. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yang, Ruisheng (2018) Optimization of inkjet printing for copper indium gallium selenide solar absorber thin film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohidem, Nur Atikah (2018) Biodegradation of alkanolamines in batch and packed-bed reactors using free laccase and sol-gel laccase. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

An, Dong (2018) 28GHz multiple input multiple output planar antenna for 5G mobile communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Ying Xuan (2018) Ab initio calculation of seebeck effect of bulk and monolayer palladium dichalcogenides. Masters thesis, Universiti Teknologi Malaysia.

Sabaruddin, Muhamad Firdaus (2018) Acid red 27 biodecolourisation and biogenic electricity generation in stacked microbial fuel cell by citrobacter freundii a1 and enterococcus casseliflavus c1. Masters thesis, Universiti Teknologi Malaysia.

Zahid, Junaid (2018) Adaptive control of one-DOF portable rehabilitation robot for wrist training. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Neo, Yun Sheng (2018) Adaptive optical feedforward linearization of optical transceiver for radio over fiber communication link. PhD thesis, Universiti Teknologi Malaysia.

Mak, Tuck Kiong (2018) Adoption of Building Information Modelling (BIM) tools during pre-construction stage in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Zainal Abidin, Muhd. Nor Ridhwan (2018) Advantages and effectiveness of project implementation through nominated sub-contractor in JKR building construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Taib, Nor Huda (2018) ajian hubungan di antara personaliti Big Five dengan gaya kepimpinan di sebuah organisasi swasta. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Zakaria, Noor Hidayah (2018) Alkire-Foster oriented ensemble fuzzy inference system for urban poverty classification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohamed, Ahmed Hussein (2018) Allocation and sizing of renewable energy distributed generation units in distribution networks using advanced differential evolution algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Mohd. Nahi (2018) Amalan pengajaran tilawah Al-Quran berkesan dalam kalangan guru pendidikan islam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Sulaiman, Mala Hayati (2018) Antecendent of service innovation behavior among hoteliers in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, International Business School.

Ismail, Hassan Fahmi (2018) Anti-diabetes mechanism of action by synacinn TM in adipocytes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Makerly, Hazelynna (2018) Antibacterial activity and metabolite profile of water and methanolic extracts of bougainvillea spectabilis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kamdi, Nurul Hafifi (2018) Antioxidant activity and antioxidant proteins dynamic simulation of Malaysia upland rice genotypes. Masters thesis, Universiti Teknologi Malaysia.

Rosly, Muhammad Bukhari (2018) The application of blended surfactant ionic liquid in emulsion liquid membrane for phenol removal from aqueous waste solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Endut, Suhaila (2018) Application of electronic communication in Malaysian standard form of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammed, Bashir Faizah (2018) Architecture design studio pedagogy for translating environmental sustainable elements. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammad, Norhasmira (2018) Automated detection of aortic annulus sizing based on decision level fusion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Choong, Kai Bin (2018) Automated image based CAPTCHA solver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tugi, Astina (2018) Bathymetry estimation from satellite geodetic missions using gravity geologic method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shalb, Safwan (2018) Beam optimization for boron neutron capture theraphy at thermal column of TRIGA Mark-II research reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ravichandran, Vinitha (2018) Big data processing on educational data mining using pyspark with jupyter notebook. Masters thesis, Universiti Teknologi Malaysia.

Wan Azahar, Wan Nur Aifa (2018) Binder characterization and performance of asphaltic concrete modified with waste cooking oil. PhD thesis, Universiti Teknologi Malaysia.

Krishnen, Ranjeni (2018) Biogranulation development during treatment of real textile wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Krishnen, Ranjeni (2018) Biogranulation development during treatment of real textile wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayoub, Lily Suhana (2018) Biohydrogen generation by dark fermentation of starch using bacteria isolated from tapioca wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasmoni, Siti Halimah (2018) Biohydrogen production by a microbial consortium isolated from local hot spring. PhD thesis, Universiti Teknologi Malaysia.

Mohamad Arba’i, Nurul Afiqah (2018) Blade performance on the effect of whale wavy leading- edge by using meshfree analysis. Masters thesis, Universiti Teknologi Malaysia.

Zakaria, Nur Hana (2018) Bond stress between steel deformed bars confined with steel fiber reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Amir Hamzah, Norhailiza (2018) Breakdown properties of high density polyethylene and polypropylene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Vaicondam, Yamunah (2018) Capital structure, capital investment and profitability among malaysian listed firms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Nawi, Wan Norlinda Roshana (2018) Carbon dioxide management for product supply chain and total site utilisation and storage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Mohamad Aizat (2018) Carbon removal of mold sample by femtosecond laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yong, Wai Yan (2018) Cell miniaturization for x-band frequency selective surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hubadillah, Siti Khadijah (2018) Ceramic hollow fibre membranes derived from natural resources for treatment of arsenic-contaminated water via membrane distillation. PhD thesis, Universiti Teknologi Malaysia.

Toh, Chia Hua @ Wee Hua (2018) Challenges against arbitral awards in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salahudin, Nur Atikah (2018) Channel assignments using constrained greedy algorithm, T-coloring and simulated annealing in mesh and cellular networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Thuraisamy, Yugeswari (2018) Characteristics of positive cloud to ground flashes in Malaysia and correlation with cloud top height. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Shafiq (2018) Characterization and properties of bamboo ash replacement in fly ash based geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saad, Nurul Alia (2018) Characterization of diesel exhaust gases emission at construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azman, Zulkifli (2018) Characterization of multiwalled carbon nanotubes by DC ARC discharge in methane under magnetic field influence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad, Maslina (2018) Characterization of particulate matter at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Muhammad Afiq Nurudin (2018) Charge-based compact model of gate-all-around floating gate nanowire with variable oxide thickness for flash memory cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Arriffin, Norzafneza (2018) Chemical constituents and bioactivities of artocarpus scortechinii king. and a. hispidus f.m. jarrett. PhD thesis, Universiti Teknologi Malaysia.

Chiok, Alice Wen-Xin (2018) Chest infection classification from X-ray images using enhanced multisource transfer learning with voting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Jit Min (2018) Circular polarization folded reflectarray antenna for 5g applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhammad, Muhammad Fikri Arif (2018) Classification of terrorism based on tweet text post on twitter using term weighting schemes. Masters thesis, Universiti Teknologi Malaysia.

Suhaimi, Huda (2018) Co-digestion of fruits and vegetable waste (FVW) with palm oil mill effluent (POME) for biogas production. Masters thesis, Universiti Teknologi Malaysia.

Khalid, Nur Fadila (2018) Coastal inundation risk assessment using multi-mission satellite altimeter and digital elevation models. Masters thesis, Universiti Teknologi Malaysia.

Ya'acob, Muhammad Shahhimi (2018) Coiled Tubing Drilling for offshore wells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohd. Sobri, Muhammad Akram (2018) Compact and multiband metamaterial hairpin-line bandpass filters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sabran, Mursyidul Idzam (2018) Compact circular polarization filtenna for wireless power transfer applications. PhD thesis, Universiti Teknologi Malaysia.

Syed Narolhisa, Sharifah Syahira (2018) The comparative of environmental impacts on waste-to-energy potential of palm oil biomas wastes for electricity generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Pidrus, Fatin Nabihah (2018) Comparative study of hybrid spectral subtraction speech enhancement algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Sharafaddin, Osama (2018) Comparing driller's and engineer's methods to control kick for basement reservoirs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Mutalibi, Efa Sofea (2018) Comparison between carboxymethyl cellulose (CMC) and palm oil fuel ash (POFA) as alternatives in fluid loss agent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ibrahim, Sharal Aida (2018) Comparison between duval triangle and duval pentagon method for dissolved gas analysis of power transformer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Razali, Siti Aisyah (2018) Computational analysis on protein-ligand interaction of xylitol-phosphate dehydrogenase enzymes for xylitol production. PhD thesis, Universiti Teknologi Malaysia.

Abdul Rahim, Rabiatul Adibah (2018) Computational modelling of trabecular bone using fluid structure interaction approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Rabiatul Adibah (2018) Computational modelling of trabecular bone structure using fluid-structure interaction approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nor, Mohd. Shukri (2018) Computer-aided modelling for flavonoid solubility prediction using combined cosmo-rs and unifac. PhD thesis, Universiti Teknologi Malaysia.

Ul Hasan, Muneeb (2018) A conceptual framework of information security database audit and assessment in university based organization. Masters thesis, Universiti Teknologi Malaysia.

Amzee Zamri, Siti Norziahidayu (2018) The conjugation degree on a set of metacyclic 3-groups and 5-groups with their related graphs. PhD thesis, Universiti Teknologi Malaysia.

Al Janabi, Tamadhur H. F. (2018) Construction bid model for residential building projects in Dubai. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Muthalib, Mohd. Faisal (2018) Contract in writing requirement for statutory adjudication claim under CIPAA 2012. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Baharudin, Nur Naqibah (2018) Control of brushless DC motor using siingle-input fuzzy proportional-integral controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ayop, Razman (2018) Control of the photovoltaic emulator using fuzzy logic based resistance feedback and binary search. PhD thesis, Universiti Teknologi Malaysia.

Salleh, Nurul Anati (2018) Copper doped and strontium co-doped lithium magnesium borate glass as thermoluminescence dosimeter irradiated by co-60. Masters thesis, Universiti Teknologi Malaysia.

Mohammadi, Massoud Alam Dad (2018) Corporate governance and financial information disclosure in developing coubtry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Rosli, Nurul Wahida (2018) Cost breakdown structure for life cycle cost of water pump. PhD thesis, Universiti Teknologi Malaysia.

Ahmad, Siti Noratika (2018) Counterfeit paracetamol tablet analysis and its discrimination using fourier transform infrared spectroscopy coupled with chemometrics techniques. Masters thesis, Universiti Teknologi Malaysia.

Baba, Hazlina (2018) Creative tourism experience of tourist in Kiulu Farmstay Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Baba, Hazlina (2018) Creative tourism experience of tourist in Kiulu Farmstay, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Kanesvaran, Ghirubaagiri (2018) Critical success factor and barriers in implementation of total productive maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Wilanda, Hebby (2018) Critical success factor for Community Benefiting through Tourism (CBtT) in cultural heritage tourism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Osagie, Atamamen Fidelis (2018) Critical success factors for sustainable green cleaning services and organisational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Shaarani @ Md. Nawi, Shalyda (2018) Cross-linked enzyme aggregates of recombinant xylanase for conversion of hemicelluloses to xylooligosaccharides. PhD thesis, Universiti Teknologi Malaysia.

Muhammad Aamir, Muhammad Aamir (2018) Crude oil price forecasting based on the reconstruction of imfs of decomposition ensemble model with arima and ffnn models. PhD thesis, Universiti Teknologi Malaysia.

Mustapha, Mamunu (2018) Cuckoo search based adaptive neuro-fuzzy inference system for short-term load forecasting. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Radzak, Fazal Redza (2018) Current mode fuzzy based controller for multilevel inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Kannuchami, Vickneshwaran (2018) Delignification of pineapple peel waste by sodium hydroxide pre-treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Kannan, Suyamprakas (2018) Design and fabrication of alternative power supply for marine vessel using wind energy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Buhari, Suffian (2018) Design behaviour of cold-formed steel encased composite beam with protruded link. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Noor Baidura (2018) Design model of technical features for a social commerce website. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zhang, Bei Bei (2018) Design of a butler matrix beamforming circuit at 28 GHZ for 5G mobile communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rajabpour, Leila (2018) Design of a robust active fuzzy PDC anti-vibration controller for the gloved-hand system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Baharom, Norhana (2018) Design of stand alone solar system with consideration of wind speed factor for remote area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamdi, Syuhaidah (2018) The determinant of visitor experience in Islamic Arts Museum Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Musa, Yahaya (2018) Determination of optically stimulated luminescence dosimetric characteristics and suitability for entrance surface dose assessement in diagnostic x-ray examinations. PhD thesis, Universiti Teknologi Malaysia.

Musa, Yahaya (2018) Determination of optically stimulated luminescence dosimetric characteristics and suitability for entrance surface dose assessement in diagnostic x-ray examinations. PhD thesis, Universiti Teknologi Malaysia.

Musa, Yahaya (2018) Determination of optically stimulated luminescence dosimetric characteristics and suitability for entrance surface dose assessment in diagnostic X-ray examinations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamid, Norin Nazira (2018) Determination of shallow substrate from satellite remote sensing data with bio-optic based algorithm. Masters thesis, Universiti Teknologi Malaysia.

Sohel, Mir Hossain (2018) Developing institutional framework of social entrepreneurship. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Foo, Kian Seng (2018) Development of a computer based green highway energy efficiency index assessment for Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rashidan, Muhammad Hanis (2018) Development of cartographic styling tool to support geospatial data interoperability. Masters thesis, Universiti Teknologi Malaysia.

Sazali, Norazlianie (2018) development of polymer blend-based carbon membrane for carbon dioxide separation from natural gas. PhD thesis, Universiti Teknologi Malaysia.

Yusuf, Badiru Yunusa (2018) Development of the framework for the integration of building information modeling to higher education in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azriyenni, Azriyenni (2018) Diagnosis kerosakan talian penghantaran sistem kuasa mengguakan kaedah inferens neural kabur ubah suai. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aizat, Muhamad Arif (2018) Dielectric barrier discharge non-thermal plasma stability analysis based on temperature profiles using fiber bragg grating sensor. Masters thesis, Universiti Teknologi Malaysia.

Idi, Danfulani Babangida (2018) The differentiated functions of sketch and digital modalities in architectural collaboration design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Merghani Hamzah, Aida Elrasheed (2018) Distributed multi-hop reservation scheme for wireless personal area ultra-wideband networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abubakar, Bashir Mohammed (2018) DNA barcoding and chemical analysis for evaluation of authenticity of selected herbal medicinal products in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Chong, Jing Wen (2018) Document summarization using transfer learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kong, Irene Cheh Lin (2018) A dual band hybrid mimo dielectric resonator antenna for long term evolution applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Suhaimi, Nazleen Syahira (2018) Dual-series 2 x 4 switched-beam nolen matrix for fifth generation wireless communication system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Oyetayo, Babalola Sunday (2018) Dynamic web for land registration towards the adoption of land administration domain model in Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Paris, Deborah Libu (2018) E-commerce implementation process framework for business-to-customer Malaysian small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia.

Sabeen, Ali Hussein Hasan (2018) Eco efficiency assessment of domestic wastewater treatment system in Malaysian urban areas. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Saad, Sk. Sakif (2018) Economic and social feasibility in providing vertical extension for single storey terrace houses in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Beh, Hooi Sean (2018) Economic criteria for sustainable affordable housing model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muhamad, Suraiya (2018) Effect of authentic chemistry problem solving competency in solving open-ended problems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Hamid, Noor Fatin Shuhada (2018) effect of cobalt-60 radiation on thermoluminescence properties of copper doped and terbium doped sodium magnesium borate. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Aris, Siti Amirah (2018) Effect of heat pre-treatment on biohydrogen production by starch-degrading bacteria. Masters thesis, Universiti Teknologi Malaysia.

Hamidon, Nurul Hazirah (2018) Effect of sweet potato pectin on multilayer emulsion stability. Masters thesis, Universiti Teknologi Malaysia.

Md. Kahmi, Mohd. Izwan (2018) Effect of thermal stress on partial discharge characteristics of oil impregnated pressboard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alam, Farzana (2018) The effect of various dopants on zno surface for gas sensor application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed Alhaj, Tagwa Ahmed (2018) An effective attack scenario construction model based on two-tier feature selection and coarse grain cleaning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Narayanasamy, Jivasangeeta (2018) Effective security in gated communities and guarded neighbourhood in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohammad Jalani, Sri Nor Hafidah (2018) An effective time of use tariffs scheme for residential area in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lin, Han (2018) Effectiveness of online forum as a platform to exchange thoughts among university students. Masters thesis, Universiti Teknologi Malaysia, Language Academy.

Othman, Noor Aini (2018) The effectiveness of pvd installation in bauxite residue soil by using plaxis 2d for settlements analysis. Masters thesis, Universiti Teknologi Malaysia.

Raja, Vinothkumar (2018) Effectiveness of STEM courseware based on edugame and assistive approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Renggu, Christine Rika (2018) The effects of lightweight macrocomposite on the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mat Rifin, Norfarha (2018) Effects of manganese oxide nanoparticles embedment on optic-magnetic features of magnesium borotellurite doped europium glass. PhD thesis, Universiti Teknologi Malaysia.

Khiyon, Mohammad Iqbal (2018) The effects of spent garnet in high strength concrete subjected to elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ghani, Nik Norhanani (2018) Effects of urea-silica precursor ratio in the synthesis of fibrous silica beta zeolite for toluene methylation. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Kamaruddin, Nurul Hidayah (2018) Effects of waste engine oil on warm reclaimed asphalt mixture. PhD thesis, Universiti Teknologi Malaysia.

Ramanathan, Shankar (2018) Efficiency studies of biobutanol production from pretreated lemongrass leaves using clostridium beijerinckii sr1. PhD thesis, Universiti Teknologi Malaysia.

Hashim, Zuridah (2018) Electric field modelling of polymer nanocomposites under various nanoparticles distributions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Khusnun, Nur Farahain (2018) Electro–synthesis of copper oxide supported on multi–wall carbon nanotubes catalyst for photodegradation of p–chloroaniline. PhD thesis, Universiti Teknologi Malaysia.

Paramalinggam, Thanalechumi (2018) Electrochemical behaviour of pesticides at bare and nylon 6,6-modified solid electrodes in differential pulse cathodic stripping voltammetry. PhD thesis, Universiti Teknologi Malaysia.

Mohammad Yaacob, Mohd. Ferdaus (2018) Electrochemical characterization of supercapacitors with glass wool separator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Dahlan, Aidayu Delaila (2018) Electromagnetic radiation between pacemaker and cellular phone with the human body in close proximity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kunashegaran, Hamsawahini (2018) Electromembrane extraction and electrochemical measurement system for heavy metal ions detection in aquatic environmental samples. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Selvaraj, Vetrivel (2018) Electrospun polyurethane with combination of nickel oxide nanoparticle and groundnut oil for future bone application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering and Health Sciences.

Ramly, Nurul Jannah (2018) Embroidery leaf-shaped dipole antenna for wearable communication system. Masters thesis, Universiti Teknologi Malaysia.

Birkia, Rabiha Mahmoud (2018) Energy and laplacian energy of graphs related to a family of finite groups. PhD thesis, Universiti Teknologi Malaysia.

Gharaei, Niayesh (2018) Energy-efficient mobile sink routing scheme for clustered corona-based wireless sensor networks. PhD thesis, Universiti Teknologi Malaysia.

Mohammed Joda, Usman (2018) Energy-efficient resource allocation scheme based on enhanced flower pollination algorithm for cloud computing data center. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Lateh, Nor Hazwani Munirah (2018) English language vocabulary profiles of undergraduate students at different proficiency levels. PhD thesis, Universiti Teknologi Malaysia.

Khairil Anuar, Mohammad Fahmi Arieef (2018) Enhanced dynamic flux variability analysis for improving growth and production rate in microbial strains. Masters thesis, Universiti Teknologi Malaysia.

Moussa, Ahmed Nour (2018) Enhanced forensic process model in cloud environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Al-Khasawneh, Mahmoud Ahmad Salem (2018) Enhanced image encryption scheme with new mapreduce approach for big size images. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohd. Ismail, Izwan (2018) Enhanced non-dominated sorting genetic algorithm for test case optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Al-Dulaimi, Ahmed Saad Faraj (2018) Enhanced oil recovery by smart water injection in sandstone reservoirs (Malaysian Crude Oil). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kamaruddin, Mohd Athir (2018) The enhancement of solar power system implementation in bheuu building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bhuiyan, Md. Yeahia (2018) An enhancement of toe model by investigating the influential factors of cloud adoption security objectives. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

El-Nafaty, Abbas Sa’id (2018) Environmental performance of naturally ventilated library buildings in Bauchi, Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jabas, Hatem Nabih (2018) Estimating time parameters for radar pulse descriptor words using FPGA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saramuji, Mohamad Fadli Adlizam (2018) Estimation of fault distance location using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alihan, Nur Surayatul Atikah (2018) Estimation of geophysical loadings over the malaysian region based on kinematic precise point positioning gps technique. Masters thesis, Universiti Teknologi Malaysia.

Abd. Rahman, Nur Hidayah (2018) Evaluating tourist sensory experience in melaka world heritage site. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sabri, Fatin Syamimi (2018) Evaluation of multi-well based system for antibody production using Chinese hamster ovary cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Azalan, Siti Aishah (2018) Evaluation on the performance of palm oil fuel ash (POFA) as fluid loss reducing agent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Muniandy, Josilva M. (2018) Experimental approach for quantifying crop water use and pollutant loading from agricultural plot. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nor, Muhammad Izzat Amir (2018) Exploiting 2-dimensional source correlation in channel decoding with parameter estimation for unknown source. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Shareef, Usman (2018) Fabrication of silver modified titanium dioxide coated ceramic membrane for bisphenol a removal via photocatalytic membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Yeap, Han Chien (2018) Face detection hardware accelerator using C-based high-level synthesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yousefi, Rozbeh (2018) Fault detection and diagnosis method for three-phase induction motor. PhD thesis, Universiti Teknologi Malaysia.

Tan, Yi Ping (2018) Feature extraction for human action recognition based on saliency map. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tung, Hao Jiun (2018) Fiber laser tuning using non-thermal plasma as temperature regulator. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Ismail, Kamsiah (2018) Field project-based learning to enhance structural design abilities for civil engineering students. PhD thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Obadiah, Ali Nyangwarimam (2018) Filtenna design with selectivity enhancement for modern communication system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chan, Swuei Ngan (2018) Filtering antenna for Wlan application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elmobarak Elobaid, Husameldin Abdelrahman (2018) Flexible materials for ultra wideband antenna design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Boo, Koon Yan (2018) Flutter analysis of a flexibly supported wing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Noor, Fazimah (2018) Foam replicated porous 316l stainless steel based on Taguchi method for biomedical applications. PhD thesis, Universiti Teknologi Malaysia.

Rahim, Hairani Maisarah (2018) Foliage attenuation in urban tropical vegetation at millimeter wave frequency bands. PhD thesis, Universiti Teknologi Malaysia.

Atarhim, Mohd. Asyraf (2018) Foohyo: an uber networking marketing apps for modern lifestyle. Masters thesis, Universiti Teknologi Malaysia.

Ngo, Yi Lei (2018) Fractionation of rosmarinic acid rich extract from orthosiphon stamineus for enzymatic anti-diabetic activity. Masters thesis, Universiti Teknologi Malaysia.

Abu Bakar, Mohamad Noor Ropiah (2018) Framework for cost saving estimation of commercial building in energy efficiency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Raheem, Abdur (2018) Framework for multistage pre-treatment of anaerobic digestion for maximizing electrical energy production. PhD thesis, Universiti Teknologi Malaysia.

Madar, Mohamed Jama (2018) A framework of science and technology in higher education for sustainable development for Somaliland. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Abdul Kadir, Munirah (2018) Framework to reduce variation processing time in public projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Daud, Nurul Izyan (2018) Free vibration of laminated composite shell structures filled with fluid. PhD thesis, Universiti Teknologi Malaysia.

Lim, Meng Chuan (2018) Frequency-reconfigurable antenna using ellipse-shaped patch with defected ground structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed Mansour, Mohammed Ahmed (2018) Fuzzy logic based pid control of quadcopter altitude and attitude stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rawi, Noraihan Afiqah (2018) g-jitter induced mixed convection flow of newtonian and non - newtonian nanofluid past an inclined stretching sheet. PhD thesis, Universiti Teknologi Malaysia.

Ibrahim, Visa Musa (2018) Gas analysis tec hnique for gas insulated switchgear condition monitoring and diagnosis. PhD thesis, Universiti Teknologi Malaysia.

Ibrahim, Visa Musa (2018) Gas analysis technique for gas insulated switchgear condition monitoring and diagnosis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Behrouzi, Farshad (2018) Generic performance management system guide for Klang Valley Hospitals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musa, Sulaiman Ibrahim (2018) Geospatial approach using socio-economic and projected climate change information formodelling urban growth. PhD thesis, Universiti Teknologi Malaysia.

Aghili, Nasim (2018) Green building management practices model for Malaysia Green Building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Teh, Jackson Ka Sing (2018) Hadarmard transform and sum of absolute difference improvement on high efficiency video coding using intel advanced vector extension-512. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salawu, Nathaniel (2018) Hard handover for load balancing in long term evolution network. PhD thesis, Universiti Teknologi Malaysia.

Chai, Kah Hieng (2018) Hardware based accelerator for database query using M-tree. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Najmi, Muhammad Amzari (2018) Health status estimation of transceiver testing machine using adaptive neuro fuzzy inference system. Masters thesis, Universiti Teknologi Malaysia.

Ashique, Ratil Hasnat (2018) High efficiency and high gain non-isolated bidirectional dc-dc converter with soft switching capability. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Woo, Yit Weng (2018) High level dataflow network partitioning using stochastic algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gafar, Shairah (2018) Holmium concentration dependent structural and optical properties of zinc tellurite glass. Masters thesis, Universiti Teknologi Malaysia.

Awaludin, Safiah Zaleha (2018) Horizontal shear force for different arrangements of coupling bars in precast concrete slab with and without steel fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Toh, Jun Hau (2018) Human pose estimation in image sequences. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nejad, Mojtaba Raeisi (2018) Hybrid and dynamic static criteria models for test case prioritization of web application regression testing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Syed Hamed, Syed Mohd. Anwar Alhabshi (2018) Hybrid approach for spam email detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zainal, Nurezayana (2018) Hybrid artificial fish and glowworm swarm optimization algorithm for electrical discharge machining of titanium alloy. PhD thesis, Universiti Teknologi Malaysia.

Choong, Jing Yee (2018) Hybrid genetic algorithm for inventory routing problem with carbon emission consideration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Norrulashikin, Siti Mariam (2018) A hybrid multivariate time series m odel for forecasting m eteorological data in peninsular malaysia. PhD thesis, Universiti Teknologi Malaysia.

Nabgan, Bahador (2018) Hydrogen production from the steam reforming of phenol-pet solution using nickle-palladium supported catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Hafizi, Ravika (2018) ICT shared service framework for E-government among organizations. PhD thesis, Universiti Teknologi Malaysia.

Yusof, Hanita (2018) Identiti ukiran kayu bagi rumah limas Johor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeap, Yong Yew (2018) Image forensic for digital image copy move forgery detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Sabri, Nursalwanie (2018) Impact of laser energy and gate delay on self-absorption of emission lines in laser induced plasma spectroscopy. Masters thesis, Universiti Teknologi Malaysia.

Isah-Chikaji, Aliyu (2018) The impact of training on turnover intention through job satisfaction moderated by job alternatives among bank employees in Nigeria. PhD thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.

Yola, Lin (2018) Impact of urban configurations on microclimate and thermal comfort in residential area of Kuala Lumpur. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saiful Bahry, Farrah Diana (2018) Impact of website credibility factors on user engagement in Malaysian municipal websites. PhD thesis, Universiti Teknologi Malaysia.

Tini, Nuhu Honney (2018) Impacts of road network connectivity on quality of in abuja city. PhD thesis, Universiti Teknologi Malaysia.

Nasaruddin @ Ismail Shah, Zurain (2018) Implementation of requirements engineering method on handling patient data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Chin, Vun Jack (2018) An improved hybrid computational method for the two-diode model in photovoltaic simulation applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Mu’azu Jibrin (2018) Improved information flow topology for vehicle convoy control. PhD thesis, Universiti Teknologi Malaysia.

Armina, Roslan (2018) Improved k-means clustering using principal component analysis and imputation methods for breast cancer dataset. Masters thesis, Universiti Teknologi Malaysia.

Tan, Chiang Wei (2018) Improved optical character recognition with deep learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abubakar, Muhammad Zia-Ul-Rahman (2018) Improvement of cluster head selection in leach protocol of wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahamed Maideen, Bashir (2018) Improvement of construction permit process approval at local government in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ab. Majid, Nurul Kausar (2018) Improvement of electronic components arrangement on printed circuit board based on thermal distribution profile using comsol multiphysics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Noramin (2018) Improvement of voltage SAGS, harmonic distortion and low power factor at distribution system by using voltage source converter (VSC) and active filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rajinder Singh, Harvinder Kaur (2018) Improvement on label production software quality with test class standardization using XP technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Ahmad Danian, Amirah Fathin (2018) In silico molecular interactions study of pattern recognition receptor XA26 and plant pathogen-associated molecular patterns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Balasundram, Vekes (2018) In-situ catalytic pyrolysis reaction of sugarcane bagasse over nickel-cerium/hzsm-5 for enhanced hydrocarbons in pyrolysis oil. PhD thesis, Universiti Teknologi Malaysia.

Narayanan, Leela T. (2018) Incentive spirometry prescription and inspiratory capacity recovery guideline for the early period after open heart surgery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Narayanan, Leela T. (2018) Incentive spirometry prescription and inspiratorycapacity recovery guideline for early period after open heart surgery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Salah, Khalil (2018) An independent protocol supporting real-time cross-network authentication in electric vehicles' network. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Abdul Rahim, Mlysha Nurshyla (2018) Indicators for transit oriented development (TOD) readiness in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Majed, Mohammed Bahjat (2018) Indoor path loss modeling for fifth generation applications. PhD thesis, Universiti Teknologi Malaysia.

Hasbullah, Nurathirah (2018) Inflow control device in openhole horizontal well. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kreishan, Ammar Yaser Soud (2018) The influence of geological and groundwater conditions on the piles driving effects induced against nearby buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Omar, Nur Amalina (2018) Influence of microbial inoculant on the oviposition and completion of life cycle of chrysomya megacephala and chrysomya rufifacies infesting rabbit carcasses. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Iqbal, Abeda (2018) The Influence of national innovation system on university-industry research collaboration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Patak, Andi Anto (2018) The influence of online learning environment, lecturers’ assessment practice, and students’ writing skills on students’ plagiarism practices. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mahmud, Mazlan (2018) Influence of religiosity and fatalism on safety behaviors of Muslim shipyard workers in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Shehab, Abdalrahim M. A. (2018) Influences of socio-cultural values to community housing design in the Gaza Strip Palestine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ku Azizan, Nurul Azreena (2018) Insulation assessment of high voltage oil impregnated paper bushing and resin impregnated paper bushing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Ahsan Usmani, Abdul Rahman (2018) Integration of as-built building information modeling and augmented reality in construction industry : a case study of the (UTM) ECO-HOME. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Islam, Md. Rashidul (2018) Integration of building maintenance cost model into the design stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkiflli, Nur Amira (2018) Intrinsic optical fiber temperature and strain sensor for structural health monitoring of concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Asri, Syazeven Effatin Azma (2018) Isolation and characterization of chitin nanowhiskers from fermented prawn waste as fillers in polylactic acid composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yasim, Nur Hanis (2018) Isolation, identification and characterisation of lignocellulolytic bacteria from mangrove roots. Masters thesis, Universiti Teknologi Malaysia.

Taib, Nor Huda (2018) Kajian hubungan di antara personaliti big five dengan gaya kepimpinan di sebuah organisasi swasta. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Palal, Nor Hairul (2018) Keperluan pembelajaran andragogi dalam pembangunan kapasiti individu operator homestay. PhD thesis, Universiti Teknologi Malaysia.

Hassan, Zulfikri (2018) Kerelevanan karya Yusoff Zaky Yacob dari perspektif pendidikan psikologi Islam dalam melahirkan mahasiswa pengajian pendidikan Islam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Kamarudin, Lina Munirah (2018) Konsep pelancongan Muslim daripada perspektif operator pelancongan di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jumaat, Nor Fatin Hanani (2018) Land cover changes mapping in cameron highlands using high resolution satellite and unmanned aerial vehicle imageries. Masters thesis, Universiti Teknologi Malaysia.

Nazarudin, Muhammad Syazani (2018) Light-emitting diode driver for lighting application using field programmable gate array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim Abbas, Azza (2018) Lignin as per flush reducing gemini surfactant adsorption on clay minerals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ramli, Amiladziffar (2018) Low cost temporary immersion bioreactor for micropropagation of local pineapple (Ananas comosus L.). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nordin, Nurafiqah (2018) Magnetic nanoparticles supported bio-stabilised palladium catalyst for the copper-free sonogashira reaction. Masters thesis, Universiti Teknologi Malaysia.

Khamdan, Siti Syukriah (2018) Mapping equatorial ionospheric profiles over peninsular Malaysia using gps tomography. Masters thesis, Universiti Teknologi Malaysia.

Mohammad Yazid, Nornajihah (2018) Marine geoid modeling from multi-mission satellite altimetry data using least squares stokes modification approach with additive corrections. Masters thesis, Universiti Teknologi Malaysia.

Mansor, Lily Syafikah (2018) Mathematical modelling of simultaneous water and energy minimisation considering water management hierarchy options. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Shaffruddeen, Muhammad Shahir (2018) Measurement of productivity rate of drainage trench excavation using lean strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Feiz, Setareh (2018) The mediating role of customer lifetime value on customer relationship management and business performance. PhD thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.

Ghaffari, Sara (2018) The mediation role of organizational commitment in the relationship between learning organizationdimension and perceived knowledge performance improvement. PhD thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.

Hashim, Mohd. Nur Amin (2018) Metamaterial filtenna at 2.4GHz for bluetooth application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Razak, Mohd. Firdaus (2018) Method comparison for gas lift allocation aimed at multiple gas lift wells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Yousif, Qais Abid (2018) Minimization of two-phase flow frictional pressure drop in small channel with environmentally friendly refrigerant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maidin, Anis Farhah (2018) Mitigation of contributing factors to construction accident. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Ahmad Qushairi (2018) Mixed convection flow of viscous and second grade fluids due to non–coaxial rotation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mukhtar, Nurul Hazirah (2018) Mixed matrix membrane microextraction for the analysis of polycyclic aromatic hydrocarbons, non-steroidal anti- inflammatory drugs and tobramycin in solutions. PhD thesis, Universiti Teknologi Malaysia.

Mukhtar, Nurul Hazirah (2018) mMpolycyclic aromatic hydrocarbons, non-steroidal anti- inflammatory drugs and tobramycin in solutions. PhD thesis, Universiti Teknologi Malaysia.

Khairuzzaman, Nur Izyan (2018) Mobile ECG acquisition device for early diagnosis based on Pan-Tompkins algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Y. Mohan, Thivaanraj (2018) A model for mobile exergame development to promote anti-sedentary behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alharbi, Talal Nasser Saud (2018) A model on evaluating information security awareness in Majmaah University in Saudi Arabia. Masters thesis, Universiti Teknologi Malaysia.

Saud Alharbi, Talal Nasser (2018) A model on evaluating information security awareness in Majmaah University in Saudi Rabia. Masters thesis, Universiti Teknologi Malaysia.

Mohamed, Armai (2018) Model perjanjian tahap perkhidmatan dalam penyumberan luar perkhidmatan pengurusan fasiliti di universiti awam Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Azizah (2018) Model struktur tekanan dan tahap kemampuan perumahan di dalam pasaran harta tanah kediaman di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Geoinformasi dan Harta Tanah.

Abd. Razak, Muhammad A’tif (2018) Modeling and analysis of cylindrical gate-all around silicon nanowire FET including BOHM quantum potential model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Adibah (2018) Modeling pulse power generator of Electrical Discharge Machining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusuf, Zakariah (2018) Modelling and control of submerged membrane bioreactor filtration process using neural network model predictive control. PhD thesis, Universiti Teknologi Malaysia.

Jamali, Annisa (2018) Modelling and intelligent control of double-link flexible robotic manipulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Admon, Mohd. Rashid (2018) Modelling of macrophages interactions in breast cancer by partial differential equations. Masters thesis, Universiti Teknologi Malaysia.

Sahraei, Mohammad Ali (2018) Modelling of traffic control delays at priority junctions using artificial neural network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sukumaran, Niroshini (2018) Modelling of xlpe nanocomposite power cable using comsol multiphysics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Zain, Zamhariah (2018) Modelling semantics of security risk assessment for bring your own device using metamodelling technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Al-Amin, Danladi Bello (2018) Modelling the impacts of land-used and climate change in Skudai river watershed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khan, Ismail Akbar (2018) Modified particle swarm optimization algorithm based power flow controller for grid-connected microgrids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Henry, Zulkipli (2018) Modified reliability reassessment of fixed offshore structures for Malaysian water. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zailani, Siti Nazrah (2018) Moisture content influence on composting parameters and degradation kinetic models in an aerated closed system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Ke Vin (2018) Molecular docking of HSPs (heat shock proteins) from rice seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Mustafa, Siti Fatimah Zaharah (2018) Molecular dynamics simulation of guest diffusional and conformational behaviour of hexadecane-1,16-diol and hexadecane in urea inclusion compound models. PhD thesis, Universiti Teknologi Malaysia.

Mansor, Siti Aishah (2018) Monitoring pre-monsoon drought in Bangladesh using remote sensing technique. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Nor, Siti Rohani (2018) Multi-population mortality model in a state-space framework. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Noor, Ahmad Fakri (2018) Multi-stage power conversion using matrix converter for solid state transformer technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Mohd. Hanafi, Fatimah Hafifah (2018) Mushroom cultivation by using agricultural wastes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abba, Habu Tela (2018) Natural radiation and radioactivity in soil and groundwater of Jos Plateau, Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sulaiman, Surajo (2018) New methods of computing the projective polynomial resultant based on dixon, jouanolou and jacobian matrices. EngD thesis, Universiti Teknologi Malaysia.

Abubakar, Isiyaku (2018) Non-intrusive load management system for residential loads using artificial neural network based arduino microcontroller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Melan, Aisyahira (2018) Non-linear finite element analysis of steel fibre self compacting reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, Seum (2018) Non-volatile flash memory characteristics implementing high-k blocking layer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Makerly, Hazelynna (2018) ntibacterial activity and metabolite profile of water and methanolic extracts of bougainvillea spectabilis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Azmi, Nur ‘Amirah (2018) Object segmentation in still images using topic modelling method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Onoja, Emmanuel (2018) Oil palm leaves ash silica-magnetite-candida rugosa lipase nanoconjugates for synthesis of butyl butyrate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abujarad, Saleh Y. I. (2018) Operational flexibility for increasing renewable energy penetration level by modified enhanced priority list method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Zain, Siti Khalijah (2018) The optical properties of erbium doped zirconium oxyfluoride tellurite glass embedded with silver nanoparticles. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Noor Nabilah (2018) The optimal coastal retracked sea levels from saral/altika satellite altimetry over the southeast asia. Masters thesis, Universiti Teknologi Malaysia.

He, Wei (2018) Optimal operation of virtual power plant model in Datong area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tahir, Nurizan (2018) Optimal spectrum sensing for cognitive radio network utilizing software defined radio platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ramli, Amalina (2018) Optimisation of biohydrogen production by locally isolated Klebsiella sp. strain PR2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zaini, Ahmad Syahmi (2018) Optimization of charantin rich powder from momordica charantia using extraction and spray drying processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Muhammad, Hamedullah (2018) Optimization of liquefied natural gas bunkering vessel design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Basharahil, Ahmed Omar (2018) Optimization of mixed refrigerant compositions for the prico natural gas liquefaction process using hysys optimizer. Masters thesis, Universiti Teknologi Malaysia.

Wahab, Nurul Eryana (2018) Optimization of n-channel silicon nanowire field effect transistor using Taguchi method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Samad, Nabilah (2018) Optimization of Plectranthus amboinicus extraction using microwave-assisted technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Buddeen, Mumtaz M. Sultan Suhai (2018) Optimization, stability and characterization of face serum formulation. Masters thesis, Universiti Teknologi Malaysia.

Patel, Sonia Dilip (2018) Palm oil extraction using enzyme mixture treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Said, Nur Nadiah (2018) Parameter optimization of evolving spiking neural network with dynamic population particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia.

Roslan, Farezdzuan (2018) Parameter optimization of evolving spiking neural networks using improved firefly algorithm for classification tasks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abas, Fatimatul Zaharah (2018) Parametric and kinetic studies of microwave-assisted pyroligneous acid from oil palm fiber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abdul Kader, Siti Arifah (2018) Pelaksanaan istibdal dalam kes pengambilan tanah wakaf. Masters thesis, Universiti Teknologi Malaysia.

Muhamad, Ahmad Dzulfahmi (2018) Pemikiran kepimpinan Ikhwan Muslimin dalam perubahan politik dan demokrasi Mesir. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Fauzi, Anisah (2018) Penentuan kriteria profil berisiko tinggi bagi urusan pendaftaran urusniaga tanah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abas, Nur Amira (2018) Pengaruh komunikasi organisasi terhadap penglibatan kerja pekerja di sebuah jabatan pengauditan kerajaan. Masters thesis, Universiti Teknologi Malaysia.

Din, Nurhafizul (2018) Penghasilan mozek berujukan foto udara legasi menggunakan kaedah padanan fitur. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Sukor, Mohammad Saipol (2018) Peranan humor dalam hubungan antara faktor stres kerja, kesetiaan organisasi dan keinginan berhenti kerja. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hanafi, Nik Nurul Hana (2018) Perception of flood victims towards housing reconstruction after 2014 flood in Kuala Krai, Kelantan. Masters thesis, Universiti Teknologi Malaysia.

Towolioe, Sherly (2018) Perception of the community on the local government failure factors on sustainable solid waste management in a developing country. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Hassan, Hasnor Syukriah (2018) The perception of tourists on the importance and performance of safe city program in Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hasan Baseri, Nur Hasnifa (2018) Performance analysis of 22NM FinFET-based 8T SRAM cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tay, Lay Ting (2018) Performance of double layer porous asphalt incorporating coconut shell and coconut fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alzuabidi, Habeeb Lateef Muttashar (2018) Performance of geopolymer self compacting concrete using spent garnet as sand replacement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azillah, Nazry (2018) Performance of lightweight concrete using palm oil clinker aggregates for precast application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maizar, Nadya Triana (2018) Petrophysical modeling of baturaja formation in zaman field using winland r35 and flow zone indicator. Masters thesis, Universiti Teknologi Malaysia.

Sithambaranathan, Paveswari (2018) Phosphoric acid doped fuel cell membranes by radiation grafting of 4-Vinylpyridine/Comonomers mixtures onto poly(ethylene-co-tetrafluoroethylene) films. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdul Hamid, Nur E’zzati Nabilah Syaqilah (2018) Physical, structural and optical properties of erbium doped tellurite glass with copper oxide nanoparticles embedment. Masters thesis, Universiti Teknologi Malaysia.

Hashim, Nur Athirah (2018) Phytochemicals and bioactivities of piper maingayi hk. f., p. magnibaccum c. dc. and p. caninum blume species. PhD thesis, Universiti Teknologi Malaysia.

Alim, Nor Shuhada (2018) Polymer modified carbon nitride composites as potential fluorescence sensors for detection of nitrite and nitrate ions. Masters thesis, Universiti Teknologi Malaysia.

Said, Noresah (2018) Polysulfone/iron oxide nanoparticles mixed matrix membranes for hemodialysis application. PhD thesis, Universiti Teknologi Malaysia.

Jatarona, Nurul Alifah (2018) Poor performance of public construction project in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharaldin, Khairun Niza (2018) Pore pressure prediction : a case study of block A, Sabah Inboard & Baram Basin, Sabah Offshore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Baharaldin, Khairun Niza (2018) Pore pressure prediction: a case study of Block A, Sabah inboard & Baram Basin, Sabah offshore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ahmad Bala, Alhassan (2018) Position and sway control of a nonlinear tower crane system using input shaping techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab. Majid, Nurul Aufa (2018) Potential demand side management of a palm oil refinery plant through pinch analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohd. Kassim, Nazirul Fariq (2018) Pre-contract cost management: a study on risk management and its effect towards costs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Kassim, Nazirul Fariq (2018) Pre-contract cost management:|ba study on risk management and its effect towards costs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismaeel Khalel, Saraa (2018) Prediction of polluted insulator based on leakage current resistance insertion performance of short and medium transmission line model. PhD thesis, Universiti Teknologi Malaysia.

Che Ithnin, Nur Hazirah (2018) Predictive modelling of biogas generation from palm oil mill effuent for the wastewayer-energy nexus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Mohamed, Nurul Najidah (2018) The preparation of averrhoa bilimbi-derived carbon-titania composite and its structure-function relationship in photocatalytic and catalytic reactions. PhD thesis, Universiti Teknologi Malaysia.

Abd. Ghapar, Nurul Faizah (2018) Preparation of chitosan-g-pmma for adsorption-desorption behavior of urea. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Kamal, Norhasyimah (2018) Preparation, characterization and mechanistic study of alumina supported calcium oxide based catalysts in transesterification of refined cooking oil. PhD thesis, Universiti Teknologi Malaysia.

Sulaiman, Nur Fatin (2018) Preparation, characterization and mechanistic study on transesterification of refined used cooking oil for biodiesel production using zinc and calcium oxides-based catalysts. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zawai, Nurain Najwa (2018) Processed meat profiling using DNA barcoding. Masters thesis, Universiti Teknologi Malaysia.

Ismail, Nor Afifa and Mohd. Yunos, Zurahati (2018) Product brand prediction in retail industry. Masters thesis, Universiti Teknologi Malaysia.

Hussin, Huszalina (2018) Production of natural vanillin from cymbopogon citratus using phanerochaete chrysosporium. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Hamzah, Mohd. Amir Asyraf (2018) Production of violacein nanoparticles via sonication technique with the aid of surfactants as stabilizer. Masters thesis, Universiti Teknologi Malaysia.

Zahari, Farrah Noor Izzati (2018) Production of xylonic acid by recombinant Escherichia coli immobilized on magnetic nanoparticles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Yong, Felicia Yan Yan (2018) Profiling of construction disputes in private projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew, Sock Tin (2018) Profiling of termination grounds in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Abolghasemi, Maryam (2018) Project performance framework for stakeholder of residential construction project. PhD thesis, Universiti Teknologi Malaysia.

Mohamed @ Mohd. Adnan, Azmi (2018) Project viability framework for privatized highway projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mustaffa, Muhammad Husnan (2018) Properties and characterization of low density polyethylene / treated cockle shells composite films. Masters thesis, Universiti Teknologi Malaysia, Creator Muhammad Husnan Mustaffa Faculty of Engineering - School of Chemical & Energy Engineering.

Mustaffa, Muhammad Husnan (2018) Properties and characterization of low density polyethylene/modified cockle shells composite films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Nordin, Nur Syahida Nafisah (2018) Properties and characterization of poly lactic acid/natural rubber/graphene nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Al Kharusi, Hamood (2018) The proposed alignment framework in enterprise architecture development for the Omani public sector. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Torabi, Mahdi (2018) Public housing self-selection through user satisfaction in the City of Qom, Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muhamad, Majidah (2018) Quality management system for knowledge management inventory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismaila, Aminu (2018) Quantitative risk assessment on fire and explosion impacts for nuclear power plants. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ogochukwu Dike, Chinyere (2018) Queueing theory based model and network analysis for predicting the transmission and control of ebola virus disease. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nallappan, Madana Leela (2018) Radiation grafted nanofibrous adsorbent containing N-methyl-D-glucamine for boron removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Kumar, Gorantla Dileep (2018) Radiation pattern reconfigurable antenna for LTE applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed Saeed, Ismael Mohammed (2018) The radiological and safety considerations for nuclear power plant siting in Iraq. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alhilali, Manhal Jaafar Jaber (2018) Rain attenuation prediction based on raindrop size distribution measurement in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Yunus, Mawarni (2018) Rain fade dynamics for Ka-band satellite communication mitigation technique in equatorial Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jaafar, Nur Farah Nizza (2018) Rain type classification for rain attenuation models in terrestrial link. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Nor Adilah (2018) Rainfall intensity duration frequency curve for Sungai Layang catchment under climate change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhtar, Muhamad Rasydan (2018) Ranking and aggregation-based multiple attributes decision making method for sustainable energy planning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tai, Chee Tung (2018) Rapid quantification of quinine by multi-stacking in a portable microchip electrophoresis system. Masters thesis, Universiti Teknologi Malaysia.

Goh, Yen Chang (2018) Real-time human expression recognition using deep learning on embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yaldi, Intan Rahmithul Husna (2018) Rectifier design for radio frequency energy harvesting system. Masters thesis, Universiti Teknologi Malaysia.

Hong, Cheong Heng (2018) Reduction of harmonic using PSO technique for grid connected photovoltaic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharin, Nur Faizzah (2018) Refractive index and temperature sensor based on large offset distance of coreless silica interferometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Goh, Dih Jiann (2018) Register transfer level design of transpose memory for the two-dimension inverse discrete cosine transform for high efficiency video coding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Heh, Whit Ney (2018) Register-transfer level design of sum of absolute transformed difference for high efficiency video coding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Arif, Muhammad Fadli (2018) Rehabilitation application program for obesity adolescent using structural equation modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ng, Xin Le (2018) The relationship between perceived servant leadership characteristics, human resource practices and turnover intention in small medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Azimian, Mohammad (2018) Relationship of service quality and hospital accreditation on patient's satisfaction and loyalty. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Soom, Ezanizam Mat (2018) A reliable procedure for load coefficient determination in structural reliability assessment of ageing offshore platforms. PhD thesis, Universiti Teknologi Malaysia.

Hamdzah, Myzairah (2018) Removal efficiency for heavy metals ions with granular resin and fibrous adsorbent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hii, Kheng Wuong (2018) Removal of aspirin and paracetamol from aqueous solution by using tea waste modified polyethylenimine adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Boushara, Reham Salah Hassan (2018) Removal of aspirin from aqueous solution using phosphoric acid - modified coffee waste adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Ghafar, Nawal (2018) Removal of Congo Red and reactive black 5 dyes from aqueous solution using polyethylenimine-modified coffee waste adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Razmi, Fatin Amirah (2018) Removal of reactive black 5 dye using modified chitosan-pandan adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Padong, Patriscia Kaching (2018) Removal of reactive black 5 dye using poly acryl amide grafted watermelon seeds in synthetic dye wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Malekinezhad, Fahimeh (2018) Restoration experience through perceived open space qualities and perceived restorativeness of students in Malaysian universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamzah, Ezdihar (2018) Risk assessment plan for Johor port contingent threats. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Tanko, Bruno Lot (2018) Roadmap for implementing value management in the Nigerian construction industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rajabi, Muhammad Javad (2018) Robust discrete cosine transform based technique for image watermarking against cropping attacks. PhD thesis, Universiti Teknologi Malaysia.

Ismail, Neza (2018) Robust engineering in maintainability of building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sham, Rohana (2018) Safe environment for female bus users in urban areas. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeong, Sook Shuen (2018) Safety communication, safety culture, and safety leadership on safety participation among manufacturing employees. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abubakar, Aliyu Ja’afar (2018) Satellite remote sensing for hydrothermal alteration minerals mapping of subtle geothermal system in unexplored aseismic environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Said, Najhan (2018) Satellite-derived bathymetry for shallow water hydrographic mapping. PhD thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Amalina Izzati (2018) Sea level rise quantification and projection using multi-mission satellite altimeter over Malaysian seas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ullah, Rafiq (2018) Seismic analysis of transmission tower under low to moderate earthquake loading. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Jeffry, Suzanna Juyanty (2018) Selection of suitable chemicals for acid matrix stimulation: a Malaysia brown field scenario. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Octaviani, Dewi (2018) Semantic model for mining e-learning usage with ontology and meaningful learning characteristics. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Mohd. Shariff, Noor Suryati (2018) Semi-dynamic geocentric datum for positional accuracy and reliability in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jumadi, Norhaslina (2018) Senior cohousing model on active ageing living from muslim perspective in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Chew, Zhen Shan (2018) Sensor-based assessment using machine learning for predictive model of badminton skills. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Saini, Mohamad Shahnizam (2018) Sentiment analysis on movie reviews by recurrent neural networks and long short-term memory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahya, Norziana (2018) Service interface mediator model for interoperability of heterogeneous operation center systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Teo, Kah Ming (2018) Shadow removal utilizing multiplicative fusion of texture and colour features for surveillance image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Aziz, Nur Azian (2018) Shoot induction of abrus precatorius. Masters thesis, Universiti Teknologi Malaysia.

Zali, Aida Amira (2018) Signal enhancement of radio frequency power measurement in 1/f noise. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Azmi, Nurul Afiqah (2018) The significance and performance of Malaysian listed property companies in international mixed asset portfolio strategies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Baharon, Mohd. Razali (2018) Simulation of aqueous humour (ah) flows and deformation of descement membrane detachment (dmd) in a three dimensional anterior chamber (ac). Masters thesis, Universiti Teknologi Malaysia.

Mohd. Yaziz, Nur Syahirah (2018) Slotted log periodic fractal koch antenna for ultra high frequency digital television application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bukeir, Mohammed Jamaladdien (2018) Social acceptance study for solar energy adoption in Yemeni household under compelling circumstances. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Khalid, Nor Aisah (2018) Soft ground improvement by prefabricated vertical drain (pvd). Masters thesis, Universiti Teknologi Malaysia.

Umali, Leandro (2018) Software optimization for input converter utility tool software using deep learning technique. Masters thesis, Universiti Teknologi Malaysia.

Shah, Jalal (2018) Software requirement change effort estimation model for software development phase. PhD thesis, Universiti Teknologi Malaysia.

Tan, Chester Laurence Barcelon (2018) Software-in-the-loop testing for product testing software in label test process. Masters thesis, Universiti Teknologi Malaysia.

Manzoor, Bilal (2018) Sound absorption capacity of garnet partial replacement in mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Iziq Eafifi (2018) Spatial evolution of Sama-Bajau houses in coastal area of Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Ibrahim, Wan Yusryzal (2018) Spatiotemporal model for landscape ecological assessment in landscape planning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmed Osmani, Mahassin Mohamed (2018) Spectrum and transmission range aware clustering for cognitive radio ad hoc networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Leon, Roy Eduardo Aguilar (2018) Speech recognition based on spectrograms by using deep learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusob, Bariah (2018) Spiking neurons in 3D growing self-organising maps. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Abd. Rashid, Husna Zahira (2018) Stability analysis PV penetration using power world. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahmud, Nazriah (2018) Stabilize machining condition of electrical discharge machining to minimize friction of hip implant. PhD thesis, Universiti Teknologi Malaysia.

Ilias, Mohd. Rijal (2018) Steady and unsteady aligned magnetohydrodynamics free convection flows of magnetic and non magnetic nanofluids along a wedge, vertical and inclined plates. PhD thesis, Universiti Teknologi Malaysia.

Granita, Granita (2018) Stochastic differential equation for two-phase growth model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Malik, Asmawi (2018) Structural analysis of floating offshore remote terminal for deep sea fishing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - Faculty of Engineering - School of Mechanical Engineering.

Azmi, Syarinie (2018) Structural and surface properties of zinc-tellurite glass doped with silicon dioxide. PhD thesis, Universiti Teknologi Malaysia.

Chin, Sofrie Siew Yung (2018) Structural behaviour of high-strength concrete column confined with steel strapping tensioning technique subjected to constant axial and lateral cyclic loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirzaei, Hamed (2018) A structural equation model for happy streets in urban residential neighborhoods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Othman, Faiz Maniza (2018) A study of best practice of scheduled outage program in increasing plant performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Kadir, Kasnilawazaidi (2018) A study of residential and commercial building for hybrid photovoltaic and battery system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasim, Harzawardi (2018) A study of thermal stability of different ZnO/p-Si diode structure toward application of radiation detectors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mhd. Hashim, Noreen (2018) Success factors for ICT shared services in higher education institutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Tan, Kean Lai (2018) Super-resolution of car plate images using generative adversarial networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Nor Hidayah (2018) Surface entrapment of chitosan on 3d printed polylactic acid scaffold. Masters thesis, Universiti Teknologi Malaysia.

Lee, Cindy Ik Sing (2018) Sustainability performance assessment of municipal solid waste management utilising aggregated indicators approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Alhaji Saba, Liman (2018) Sustainable construction materials and assemblies for Nigerian low cost housing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Subramaniam, Puspanathan (2018) Sustainable design at transition rigid piled embankment with surcharged vertical drain over soft ground. PhD thesis, Universiti Teknologi Malaysia.

Lukuman, Musibau (2018) Sustainable livable housing assessment model for traditional urban areas in Nigeria. PhD thesis, Universiti Teknologi Malaysia.

Salleh, Abrari (2018) Sustainable service quality of water and sewerage companies. PhD thesis, Universiti Teknologi Malaysia.

Shahadan, Nur Hidayu (2018) Switchable dielectric resonator antenna array for fifth generation applications. PhD thesis, Universiti Teknologi Malaysia.

Abbas Al-Naimi, Taha Mahmoud (2018) Synchronization of receiver for decoding automatic dependent surveillance broadcast signals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jaberolansar, Sara (2018) Syntactical relation between spatial configuration and sense of safety in neighbourhood commercial streets. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Noor, Mohamed Hizam (2018) Synthesis and application of polyacrylamide grafted magnetic cellulose flocculant for wastewater treatment. Masters thesis, Universiti Teknologi Malaysia.

Soloi, Sabrina (2018) Synthesis and characterization of amide based palm oil polyol via ring opening reaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Mubin, Mohamad Helmi (2018) Synthesis and characterization of bismuth ferrite nanoparticles with sillenite phase via sol gel auto combustion route. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mad Salim, Mashitah (2018) Synthesis and characterization of cethyltrimethyl ammonium bromide and silver supported Nay zeolites for antibacterial applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ayob, Mohamad Haqzim (2018) Synthesis and characterization of cobalt–based catalysts for selective oxidation of styrene and photodegradation of methylene blue. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zolkifli, Afifah Syafiqah (2018) Synthesis and characterization of fibrous HFZSM-5 for alkylation of benzene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Jamian, Siti Fatimah (2018) Synthesis and characterization of fibrous silica zsm-5 for methanol to olefin reaction. Masters thesis, Universiti Teknologi Malaysia.

Anggraini, Dahlia (2018) Synthesis and characterization of hydroxyl terminated natural rubber-grafted graphene oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Chong, Chun Yew (2018) Synthesis and characterization of thin film nanocomposite reverse osmosis membrane for salt and boron removal. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Tajul Arifin, Nur Fatihah (2018) Synthesis and physicochemical properties of reduced graphene oxide membrane for humic acid rejection. Masters thesis, Universiti Teknologi Malaysia.

Fauzi, Anees Ameera (2018) Synthesis of fibrous silica titania catalysts for photodegradation of ibuprofen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Latefi, Nur Asma Sasabila (2018) Tannin from local Rhizophora Mucronata barks as deflocculant in drilling fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Kingsley, Dike Obinna (2018) Target cell coverage aware handover algorithm for ultradense heterogeneous networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ma’ruf, Amar (2018) Teachers’ conception of assessment knowledge and their preferred assessment system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Angie, Steffi Mit (2018) Techno – economic study of 33 kV distribution lines using aerial bundle cable and spacer cable. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahman, Nur Syafiqah Zahirah and Abang Jawawi, Dayang Norhayati (2018) Test case generation technique for concurrency in activity diagram. Masters thesis, Universiti Teknologi Malaysia.

Roslan, Nor Faradilla (2018) Theoretical study on chiral recognition of vinpocetine, ketoconazole, bromuconazole and propiconazole stereoisomers by teicoplanin aglycone chiral selector. Masters thesis, Universiti Teknologi Malaysia.

Yasir Salam Kadhim, Al-Tameemi (2018) Thermal and daylight performance of tilted glass as shading alternative in hot arid climate of Baghdad. Masters thesis, Universiti Teknologi Malaysia.

Johari, Abdul Rahman (2018) Thermal electric cooling system based on Arduino module for diode pumped solid state laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hassan, Hasliza (2018) Thermal-safe system-on-chip test scheduling using dynamic voltage and frequency scaling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Basri, Nor Afifah (2018) Tinjauan dan pemilihan calon tapak loji janakuasa nuklear di Semenanjung Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mansor, Nor Liyana (2018) Tourism integrated zoning near salt lick areas for wildlife ecology management of royal belum state park, Perak. Masters thesis, Universiti Teknologi Malaysia.

Ali, Haider (2018) Traffic classification and management based flow statistics netfpga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Shamsudin, Nurshamshida (2018) Training design, development and evaluation for occupational safety and health hazard identification using virtual reality. PhD thesis, Universiti Teknologi Malaysia.

Goo, Jia Jun (2018) Transient hydraulics and multiphase kick tolerance study to improve design of narrow margin well. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Isa, Nurun Nadhirah (2018) Tree community structure and carbon stock of a secondary forest in Universiti Teknologi Malaysia campus. PhD thesis, Universiti Teknologi Malaysia.

Md. Isa, Nurun Nadhirah (2018) Tree community structure and carbon strock of a secondary forest in Universiti Teknologi Malaysia Campus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Me, Salasiah (2018) Tungsten-phosphate supported on titania-silica as oxidative-acidic bifunctional catalyst for diol synthesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahman Sabri, Harris (2018) Turbomachinery project management framework in oil and gas industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Nejat, Payam (2018) Two-sided windcatcher in low wind speed environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Yi Wei (2018) Unattended baggage detection using deep neural networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainal, Noor Ainnie Safina (2018) Unequally spaced microstrip linear antenna arrays for fifth-generation base station. PhD thesis, Universiti Teknologi Malaysia.

Alhaji, Dodo Mustapha (2018) Unit commitment scheduling using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.

Saidin, Norshaza Atika (2018) Unsteady free convection nanofluid flow near stagnation point of a three-dimensional body. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Zin, Nor Athirah (2018) Unsteady MHD free convection flow of Jeffrey fluid and Jeffrey nanofluid along a vertical plate with radiation effect. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sim, Lee Sen (2018) Upper extremity assessment and rehabilitation system for stroke patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Fatihah, Nor Fatin (2018) The use of durian rind as lost circulation material. Masters thesis, Universiti Teknologi Malaysia.

Ishak, Nurliyana Izzati (2018) Vegetation anomaly index from remote sensing for landslide activities mapping. Masters thesis, Universiti Teknologi Malaysia.

Wan Abd. Kadir, Wan Zahiruddin (2018) Video annotation using convolution neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Yan Yin (2018) Video surveillance using raspberry PI GPU. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nadiha, Nor Azrini (2018) Virgin coconut oil based nanostructured lipid carrier loaded with ficus deltoidea extract for skin barrier improvement. Masters thesis, Universiti Teknologi Malaysia.

Tan, Teck Ying (2018) Voltage fluctuation and harmonic emission related to light emitting diode lamps. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Nor Aziah (2018) Volume loss assessment for twin tunneling of Klang valley mass rapid transit line 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rosw Zaidi, Rose Neezar (2018) Water quality monitoring system with IOT. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Chi Wee (2018) Watermarking scheme using slantlet transform and enhanced knight tour algorithm for medical images. PhD thesis, Universiti Teknologi Malaysia.

Mohammed, Habeb Sufyan (2018) Way of thinking of Imam Mohammad bin Al- Mutahhar Al- Hasani in Al-Nasikh and Mansukh in holy Qur'an. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Abu Bakar, Nur Izzati (2018) Well-aligned one-dimensional-like titania-liquid crystals composite photocatalyst synthesized under magnetic field. PhD thesis, Universiti Teknologi Malaysia.

Ooi, Chu Hui (2018) Work breakdown structure for water distribution pipeline networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khan, Imran Ullah (2018) Zeolitic imidazolate frameworks blended polysulfone hollow fiber membranes for natural gas purification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

This list was generated on Tue Oct 15 18:30:56 2024 +08.