Items where Subject is "T Technology > TE Highway engineering. Roads and pavements"

Article

Afzali, A. and Samani, J. M. V. and Rashid, M. (2011) Municipal landfill site selection for Isfahan city by use of fuzzy logic and analytic hierarchy process. Iranian Journal of Environmental Health Science and Engineering, 8 (3). pp. 273-284. ISSN 1735-1979

Asadi-Shekari, Zohreh and Moeinaddini, Mehdi and Shah, Muhammad Zaly (2013) Non-motorised level of service: addressing challenges in pedestrian and bicycle level of service. Transport Reviews, 33 . pp. 1-31. ISSN 01441647

Ben-Edigbe, Johnnie and Mashros, Nordiana (2012) Extent of highway capacity loss resulting from road humps. International Journal of Engineering and Technology, 4 (2). pp. 121-125. ISSN 1793-8244

Che Puan, Othman (2004) Driver's car following headway on single carriageway roads. Jurnal Kejuruteraan Awam, 16 (2). pp. 15-27. ISSN 0128-0147

Chik, Abdul Aziz and Che Puan, Othman and Chai, Ming Jing (2004) Entry and circulating flow relationship at a roundabout. Jurnal Kejuruteraan Awam, 16 (1). pp. 48-60. ISSN 0128-0147

Chik, Abdul Aziz and Ismail, Che Ros and Hainin, Mohd. Rosli (2000) Midblock signalled pedestrian crossing : alternative controller algorithms. Jurnal Kejuruteraan Awam, 12 (1). pp. 43-51. ISSN 0128-0147

Darwish, Tasneem and Abu Bakar, Kamalrulnizam (2015) Traffic density estimation in vehicular ad hoc networks: A review. Ad Hoc Networks, 24 . pp. 337-351. ISSN 1570-8705

Hainin, Mohd. Rosli (2000) Evaluation of indicator tests for identification of segregation in flexible pavements : a case study. Jurnal Kejuruteraan Awam, 12 (2). pp. 1-12. ISSN 0128-0147

Hassan, Sitti Asmah and Amlan, Hamizah Amalina and Alias, Nor Eliza and Ab. Kadir, Mariyana Aida and Abdul Sukor, Nur Sabahiah (2022) Vulnerability of road transportation networks under natural hazards: A bibliometric analysis and review. International Journal of Disaster Risk Reduction, 83 (103393). ISSN 2212-4209

Jimi Sham, Rashidah and Syed Mahdzar, Sharifah Salwa and Qamaruz Zaman, Nurulhusna and Abd. Jalil, Nurul Amira and van Nes, Akkelies (2023) Discovering the axial lines of bunus river as a social network in Kampong Bharu using space syntax analysis. International Journal of Sustainable Construction Engineering and Technology, 14 (5). pp. 117-130. ISSN 2180-3242

Khan, Saif Ur Rehman and Khalifah, Zainab and Munir, Yasin and Islam, Talat and Nazir, Tahira and Khan, Hashim (2015) Driving behaviours, traffic risk and road safety: comparative study between Malaysia and Singapore. International Journal Of Injury Control And Safety Promotion, 22 (4). pp. 359-367. ISSN 1744-2370

Lamit, Hasannudin and Abd Majid, Muhd. Zaimi and Shafaghat, Arezou and Keyvanfar, Ali and Abbas Malik, Tassaduq (2012) Sidewalk design decision making model based on walking behaviour pattern recognition: proposal validation. International Journal of Sustainable Development, 4 (1). pp. 27-34. ISSN 1923-6654

Ling, Tung Chai and Md. Nor, Hasanan and Ming, Fai Chow (2008) Permanent deformation of concrete block pavements under highway accelerated loading. Road Engineering Association of Asia and Australia (REAAA) Journal, 15 (1). pp. 1-8.

Marto, Aminaton and Kasim, Fauziah and Mohd. Yusof, Khairul Nizar (2002) Mineralogi, mikrostruktur dan komposisi kimia tanah baki granit Semenanjung Malaysia. Jurnal Kejuruteraan Awam, 14 (1). pp. 1-17. ISSN 0128-0147

Mashros, Nordiana and Ben-Edigbe, Johnnie and Rahman, Raha (2012) Extent of highway travel time differentials resulting from rainfall intensities. British Journal of Applied Science and Technology, 2 (3). pp. 254-265. ISSN 2231-0843

Mohd. Zaid, Z. B. and Shah, M. Z. and Rahim, A. B. A. (2016) Modelling the road transport for efficiency analysis. Trends in Bioinformatics, 9 (2). pp. 65-69. ISSN 1994-7941

Mosa, Ahmed Mancy and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi and Mubaraki, Muhammad Ali and Memon, Naeem Aziz and Taha, Mohd. Raihan and Hainin, Mohd. Rosli (2015) An expert system to remedy concrete imperfections and their effects on rigid pavements. Jurnal Teknologi, 76 (14). pp. 105-119. ISSN 2180–3722

Mudiyono, Rachmat and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Ling, Tung Chai (2007) Performance of concrete block pavement on sloped road section. International Journal of Pavement (IJP), 6 (1-2-3). pp. 1-10. ISSN 1676-2797

Rahim, N. S. A. and Mustaqim, M. and Saidi, M. I. and Adrutdin, K. F. and Hasan, M. A. (2016) Factors that contribute towards motorcycle lane lack of usage in Butterworth Kulim expressway (BKE). Advanced Science Letters, 22 (5-6). pp. 1244-1247. ISSN 1936-6612

Rizvi, Syed R. and Olariu, Stephan and Pinotti, Cristina M. and Md. Salleh, Shaharuddin and Rizvi, Mona E. and Zaidi, Zainab (2011) Vehicular ad hoc networks. International Journal of Vehicular Technology, 2011 . pp. 1-2. ISSN 1687-5702

Roshandeh, Arash Moradkhani and Nesheli, Mahmood Mahmoodi and Che Puan, Othman (2009) Evaluation of traffic characteristics: a case study. International Journal of Recent Trends in Engineering (Civil Engineering), 1 (6). pp. 62-68. ISSN 1797-9617

Saad, Rosli and Mohd. Noordin, Mohd. Nawawi and Mohamad, Edy Tonnizam (2008) Subsidence prediction along the karak highway by 2-d electrical imaging geophysical method. Geotechnical & Highway Engineering .

Saharuddin, N. Z. and Abidin, I. Z. and Mokhlis, H. and Hassan, M. Y (2021) Power system controlled islanding using modified discrete optimization techniques. International Journal of Advanced Computer Science and Applications(IJACSA), 12 (7). pp. 487-492. ISSN 2158-107X

Savita, K. S. and Dominic, P. D. D. and Ramayah, T. (2016) The drivers, practices and outcomes of green supply chain management: Insights from ISO14001 manufacturing firms in Malaysia. International Journal of Information Systems and Supply Chain Management, 9 (2). pp. 35-60. ISSN 1936-6612

Yaacob, Nur Fatma Fadilah and Rusli, Noradila and Bohari, Sharifah Norashikin and Mat Yazid, Muhamad Razuhanafi and Muhammad Das, Amsori (2020) Integrated GIS tool for investigating the relationship of road characteristics with road traffic accidents. Jurnal Kejuruteraan, 32 (4). pp. 683-691. ISSN 2289-7526

Monograph

Awang, Abdullah Zawawi and Rais, Ahmad Zaidon and Abd. Hamid, Hazlan and Yassin, Mohamad Salleh (2002) Feasibility study on replacement of steel signboard post with prestressed concrete post. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Che Puan, Othman and Hainin, Mohd. Rosli and Chik, Abdul Aziz and Ismail, Che Ros (2002) Driver's car following headway on single carriageway roads. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Gofar, Nurly and Kassim, Khairul Anuar (2005) Study of compressibility characteristics of peat soil using large strain consolidometer. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Gofar, Nurly and Kassim, Khairul Anuar (2006) Determination of coefficient of rate of horizontal consolidation of peat soil. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ismail, Che Ros and Hainin, Mohd. Rosli and Chik, Abdul Aziz (2005) Evaluation of fundamental properties of compacted mixes used as patching materials for low volume roads. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Kasim, Fauziah and Marto, Aminaton (2003) Performance characteristics of embankment on soft ground. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kassim, Khairul Anuar and Shamshuddin, Mustafa Kamal (1999) Lime stabilization for marginal sub-grade as capping layer for road construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Marto, Aminaton and Kasim, Fauziah (2003) Characterisation of Malaysian residual soils for geotechnical and construction engineering. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Nor, Hasanan and Ismail, Che Ros (2006) The effect of thickness and laying pattern of paver on concrete block pavement. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Mohd. For and Mustaffar, Mushairry (2001) An approach to joint roughness measurement in Rock-A comparative study. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Mohd. For and Kassim, Azman and Mohamad, Edy Tonnizam and Ong, Heng Yau (2003) Classification of filled joint based on the characteristics of its constitutive components. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mokhtar, Nor Aieni and Kassim, Azman and Gofar, Nurly (2004) Combining design methodologies for the development of a practical and effective approach to erosion control systems. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

Abdul Rahman, Raha (2011) Effects of u-turn facility on traffic operational perfomance on multinale divided highway - a literature review. In: Curtin University Science & Technology International Conference (CUTSE 2011).

Andenan, Nurnadia and Mohd. Yusof, Mohd. Rashid and Abd. Rahim, Siti Hajar and Ammar, M. R. (2015) Penetration of particle across a newly formulated filter aids material. In: Third International Postgraduate Conference, 23-25 Feb, 2015, Johor Bahru, Johor.

Che Puan, Othman (2011) Pedestrian and vehicular traffic delays at zebra crossing facilities. In: Curtin University Science & Technology International Conference (CUTSE 2011).

Islam, Monirul and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Mahmud, Syamsul Hendra and Mohamed, Azmi and Khiyon, Noor Azeyah (2021) A systematic approach to reduce operation and maintenance costs of private highway projects in Malaysia. In: 3rd International Conference on Separation Technology, ICoST 2020, 15 - 16 August 2020, Virtual, Online.

Ling, Tung Chai and Md. Nor, Hasanan (2006) Plant trial production process and monitoring of crumb rubber concrete paver. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan (2007) Properties of crumb rubber concrete paving blocks with and without facing layer. In: Persidangan Kebangsaan AWAM 2007, 29th - 31st May 2007, Hotel Helang, Pulau Langkawi, Kedah Darul Aman.

Ling, Tung Chai and Md. Nor, Hasanan and Ming, Fai Chow (2007) Highway accelerated loading instrument (HALI) testing on permanent deformation for concrete block pavement. In: 7th Malaysia Road Conference 2007, 17th - 19th July 2007, Kuala Lumpur, Malaysia.

Ling, Tung Chai and Hainin, Mohd. Rosli and Ming, Fai Chow (2006) Highway accelerated loading instrument (HALI) for concrete block pavement. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan (2007) Effect of curing conditions on the compressive strength of crumb rubber concrete paving blocks. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Mustaffar, Mushairry and Che Puan, Othman and Ling, Tung Chai (2004) Application of digital photogrammetry to quantification of road surface distresses. In: Malaysian Road Conference, 6th, 2004, Kuala Lumpur, Malaysia, 16-18 August 2004, Kuala Lumpur, Malaysia.

Mustaffar, Mushairry and Puan, O. C. and Ling, Tung Chai (2008) Automated pavement imaging program (APIP) for pavement cracks classification and quantification – a photogrammetric approach. In: XXIth ISPRS Congress, Society of Photogrammetry and Remote Sensing, 3th - 11th July 2008, Beijing, China.

Tung, Chai Ling and Md. Nor, Hasanan (2006) Granulated waste tyres in concrete paving block. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Valipour, Alireza and Yahaya, Nordin and Md Noor, Norhazilan and Fard S., Sabetian (2012) Fuzzy analytic network process approach to risk assessment of public-private partnership (PPP) highway projects in developing countries. In: The 1st Australasia and South East Asia Conference in Structural Structural Engineering and Construction (ASEA-SEC-1), 2012, Curtin University, Perth, Western Australia.

Wan Ibrahim, Wan Rohaizad and Salleh, Shaharuddin (2015) Weighted-minimum cost reliability ratio path problem. In: Modelling, Identification and Control 2015 (MIC2015), 1 April, 2015, Austria.

Thesis

Emmanuel, Abioye Abiodun (2021) Model predictive control strategy for precision irrigation towards water saving agriculture. PhD thesis, Universiti Teknologi Malaysia.

Abd. Rahman, Abd Talip (2012) Pedestrian utilization; enhancing from existing : a study case of pantai Chenang, Langkawi and Melaka Historical City, Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Rahman, Zanariah (2006) Evaluation on properties of tender mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abduh Dahlan, Fahmi M. (2007) Utilization of coarse crumb rubber to enhance hot mix asphalt mixture properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Waznah (2008) Tahap kefahaman dan kesesuaian pemeriksaan kesihatan projek sebagai alat pemantauan di Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdul Hassan, Norhidayah (2007) Performance of hot mix asphalt using fine crumb rubber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rani, Onn (2007) The effectiveness of pavement rehabilitation at Kuala Lumpur Karak Highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulgader Dow, Hamed (2008) Effects of air void and porosity on moisture damage of Malaysian specialty HMA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulkarim, Sunusi (2020) Road transport policy impact on economic development in federal capital territory Abuja, Nigeria. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Mohd. Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulridha, Ali Abdulhussein (2014) Effect of crumb rubber size and content on the properties of dry mixed rubberized asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Afzal, Abdullah (2021) Simulation of electrical and thermal properties performance of mineral oil based nanofluids. Masters thesis, Universiti Teknologi Malaysia.

Ahmad, Kabiru Abdullahi (2014) Micro-structural properties of porous asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Mustaffa Anjang (2001) Analisis algoritma laluan terpendek untuk sistem pandu navigasi kenderaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad Tarmuzi, Nadhir (2013) The effect of aggregateÆs angularity on engineering properties and performance of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Al-Ameri, Adeb Qaid (2010) Influence of interface components on the street level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alhassan, Hashim Mohammed (2013) Influence of rainfall on the capacity of single carriageway in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Dorries (2013) Student's perception about road safety education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amiruddin, Mohd. Noor Asyraf (2010) Study on the skidding performance of stone mastic asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Apriansyah, Banny (2008) Platoon dispersion factors for trafic on single-carriageway roads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Assan, Kemby (2002) Kesan agregat lembap dan berdebu terhadap jalan dandanan permukaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz Memon, Naeem (2006) Comparison between superpave gyratory and Marshall laboratory compaction methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baskara, Sudesh Nair (2009) Investigations of factors affecting pendulum test value on asphaltic concrete surfaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bibi Farouk, Abdul Warith Ibrahim (2014) Effect of rubber bitumen interaction o the properties of dry mixed rubberized asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Ming Jing (1999) Entry and circulating flows relationship in roundabout. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che' Mat, Nurulain (2013) Effect of modified sasobit on performance asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Elizabeth Eu Mee (2006) The effects of nominal maximum aggregate size on the properties of hot mix asphalt using gyratory compactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daniel, Akinmade Oluwatosin (2011) Comparative analysis of stage and phase signal control of a signalised intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elsayed, Mohamed Ahmed Abdelhadi (2013) Applicability of SIDRA for heterogeneous traffic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esarwi, Ahmed Mohamed (2008) The effect of mix design system on stripping potential of hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esmaeeli, Hamed (2010) Road accident analysis factors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faizal, Nazib (2011) Applying value engineering in slope failure on road embankment remedial work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghobakhlou, Ida (2012) Effects of gradient on speed of vehicles on an Iranian single carriageway road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Giwangkara, Grawira Ganjur (2010) A study on marine sand as a jointing material for concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harun, Mohd. Harzazi (2009) Highway maintenanance management : case study at Projek Lebuhraya Utara Selatan (PLUS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Wardati (2008) The environmental effect on the cooling rate of hot mix asphalt pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasim, Melani (2009) Effect of various types of traffic signal on red light running. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Siti Hafizan (2005) Design phase constructability concepts in highway projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hazrati, Atousa (2012) Influence of urban form on pedestrian perception of walkable environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hosseini, Seyed Hossein (2011) Comparative analysis of level of service (LOS) under varying lighting conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Husin, Khairul Anwar (2001) Kajian pengisi sambungan dan penguncian turapan blok konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ithnin, Noorafidah (2008) Determination of mixing and compacting temperatures for hot mix asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaludin, Jamal Aimi (2012) Influence of traffic and transportation characteristics over road surface temperature (RST). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jamion, Nazaruddin (2013) Performance of micro surfacing on expressway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Juri, Satiah (1997) Penilaian dan penggunaan perisian komputer terhadap pengurusan rangkaian lalu lintas setempat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jusoh, Norzaliha (2013) Driver attitude towards road safety. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Khalid, Nor Ikhwan (2010) Adhesion on different rate of binder and aggregate for chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Norazlan (2008) The geotechnical properties of pulverised fuel ash (PFA) as road embankment construction material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kumaraweh, Inthiran (2004) Privatization of road maintenance in Malaysia : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kurdi, Azmah (2001) Requirements in the provision of pedestrian crossing facilities in urban area : a study in Johor Bahru Central Businee District. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Ee Von (2011) Car plate recognition system based on chain code and local signature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liew, Yee Shian (2013) Evaluation of bond strength between hot mix asphalt surfacing layers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mamat, Rosmawati (2008) Evaluation of marshall properties of asphalt mixtures with aggregate gradations designed using the bailey method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marwan, Hazlina (2013) An investigation on vehicle overloading in Muar - Melaka road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Sah, Norkhairulnisa (2004) Penyediaan garis panduan tampalan jalan bagi jalan kampung. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Lani, Nor Hafizi (2000) Penentuan anggaran harga berpatutan bagi turapan jalan blok konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Nasir, Noor Izaidah (2013) The construction of road diversion in swampy area ta Jalan Lencongan Kurong Tengah, Perlis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Nor, Hasanan (1994) The use of palm oil products to modify and rejuvenate bitumens. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md.Yusoff, Nur Izzi (2005) Kajian kelakuan pasir penyambung turapan penguncian blok konkrit pada jarak sambungan dan kecerunan yang berbeza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misri, Mohd. Zaime (2019) Penyenggaraan jalan luar bandar di Daerah Petaling. Masters thesis, Universiti Teknologi Malaysia.

Moghaddasi, Ali (2013) The effect of aging on asphalt mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Azman (2004) Prestasi sambungan turapan penguncian blok konkrit menggunakan pasir pengalas dengan bahan tambah simen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Nurul Wahida (2010) Road maintenance management system : a case study at public work department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Balrwin, Rafeg Ali (2008) Highway interchange simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd., Zuraidah (2002) Assessment of slope maintenance programme along the north south expressway (southern region). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasir, Ahmad Munir (2002) Kajian penandaarasan proses-proses pengurusan penyenggaraan lebuhraya : kes kajian : Kesas Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Noor, Zinatul 'Ashiqin (2013) Relationship of rutting and roughness and resilient modulus of flexible expressway pavements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Satar, Mohd. Khairul Idham (2009) Development of software for rigid pavement thickness design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sith, Nurain (2015) The effect of oversized lane width and lane shoulder on heavy vehicle parking on residential streets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yaacob, Zulkarnine (1990) Penstabilan tanah gambut menggunakan bahan tambah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohidin @ Mohyeddin, Md. Nazri (2002) Kajian statistik kos dan kerja pembaikan cerun di Wilayah Selatan Lebuh Raya Utara Selatan (PLUS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muniandy, Asogan (2008) Determination of pedestrian level of service at Pelabuhan Tanjung Pelepas M&R area and Flextronics area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muslim, Nurul Hidayah (2014) Ground penetrating radar imaging and its application to pavement structural assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustakim, Fajaruddin (2005) Treating hazardous locations at federal route 50. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Ahmad Fauzi (2021) Minimization of power losses and improve voltage profile in distribution network by considering massive solar distributed generation. Masters thesis, Universiti Teknologi Malaysia.

Othman, Alwee (2006) Kelakuan pemandu ketika masa amber dalam kawasan taman perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paydar, Mohammad (2013) Perceived complexity and perceived legibility on choice of pathway by urban pedestrians. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Putra, Hardiansyah (2012) Value engineering in road construction at expansive soil problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rita, Eva (1999) Kesan air pada pengalas dan penyambung turapan blok konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh, Ahmed Moftah (2008) Comparison between the rolling thin film oven test and the pressure aging vessel aging simulation tests. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shamshuddin, Mustafa Kamal (2004) Lime stabilization of marginal soil as capping layer for road construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shamsul Harumain, Yong Adilah (2012) Corak pergerakan pejalan kaki dan kesannya ke atas daya tarikan perniagaan di jalan Wong Ah Fook. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sinaei, Amir (2013) Comfortable high street in CBD of Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sulaiman, Kamal Hamza (2014) Effect of gradations on the performance of porous asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tiong, Hwa Nguong (2008) Short-term ageing effects on asphalt binders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Trang Nhat, Tran (2008) The relationship of bitumen content, aggregate surface area, and extraction time using asphalt ignition furnace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tuan Soh, Tuan Nor Hazwani (2013) Storm water management criteria for Malaysia green highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tumin, Saiful Asmin (2012) Modeling and analysis of road vehicle following system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Umar Baki, Nazurah Zahidah (2013) Establishment of sustainable design criteria for Malaysian green highway index. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Velian, Vrida Ingrid (2013) Evaluation of bond strength between hot mix asphalt and stone mastic asphalt surfacing layer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahab, Wilton (2000) Panjang optimum lorong pecutan bagi operasi mencantum di jalan raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ahmad, Saffuan (2009) Non linear seismic performance of smart tunnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Azahar, Wan Nur Aifa (2014) Assessment score for green pavement technology elements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wiyono, Sugeng (2006) Application of road deterioration simulation model for prediciting initiation and progression of cracks on road pavement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Wong, Tony Chee Siang (2006) Development of land based mobile mapping system using global positioning system and close range photogrammetric techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Yaacob, Noordiana (2003) Pengurusan penyenggaraan turapan di Lebuhraya Utara-Selatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yero, Arafat Suleiman (2008) The determination of the texture depth, skidding resistance and roughness index of various bituminous road surfaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal, Mohd. Zaidi (2007) Effectiveness of road maintenance management in Klang district. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainorabidin, Adnan (2001) Sifat-sifat kejuruteraan tanah gambut jenis hemik di Johor Barat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.