Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "Q Science > QH Natural history"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | W | Y | Z
Number of items at this level: 222.

A

Abdul Kadir, Mohamed Rafiq and Iqbal,, Nida and Mahmood,, Nasrul Humaimi and Salim,, Norita and Froemming,, Gabriele R.A and Balaji,, H. R. and Kamarul,, T. (2014) Characterization, antibacterial and in vitro compatibility of zinc-silver doped hydroxyapatite nanoparticles prepared through microwave synthesis. Ceramics International, 40 (3). pp. 4507-4513. ISSN 0272-8842

A. Jalil, Mohd. Dzulkifli (2000) Kajian keberkesanan persekitaran pembelajaran multimedia interaktif dalam mata pelajaran biologi : satu Kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd Latif, M. J. and Ismail, N. R. A. and Ramlan, R. and Mahmud, J. and Kadir, M. R. A. (2013) Sensitivity study of surface curvature in characterisation of cartilage mechanical properties. In: Applied Mechanics And Materials.

Abdul Hakim Mohamed Salleh, (2014) In silico metabolites production enhancement using hybrid genetic colony optimization and flux balance analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdul Kadir, Mohamed Rafiq and Sahadun, Nur A and Haron, Habibollah (2014) A review on age identification techniques for non-human in forensic anthropology. Studies in Computational Intelligence, 555 . pp. 165-186. ISSN 1860-949X

Abdul Kadir, Mohamed Rafiq and Goh,, Yifan and Alshemary,, Ammar Z. and Akram,, Muhammad Aftab and Hussain,, Rafaqat (2014) Bioactive glass: an in-vitro comparative study of doping with nanoscale copper and silver particles. International Journal of Applied Glass Science, 5 (3). pp. 255-266. ISSN 2041-1286

Abdul Kadir, Mohamed Rafiq and Jamuna-Thevi,, Kalitheertha and Hermawan,, Hendra (2014) Chemical and thermal stability of multiple ions doped nonstoichiometric nanoapatite heat-treated in CO2 and air atmospheres. Advanced Materials Research, 925 . pp. 77-81. ISSN 1022-6680

Abdul Kadir, Mohammed Rafiq and Fallahiarezoodar, Ali and Alizadeh, Mina and Naveen, Sangeetha Vasudevaraj and Kamarul, T. (2014) Geometric variable designs of cam/post mechanisms influence the kinematics of knee implants. Knee Surgery, Sports Traumatology, Arthroscopy, 22 (12). pp. 3019-3027. ISSN 0942-2056

Abdul Kadir, Mohammed Rafiq and Goh, Yifan and Alshemary, Ammar Z. and Akram, Muhammad Aftab and Hussain, Rafaqat (2014) In-vitro characterization of antibacterial bioactive glass containing ceria. Ceramics International, 40 (1 Part). pp. 729-737. ISSN 0272-8842

Abdul Kadir, Mohammed Rafiq and Iqbal, Nida and Mahmood, Nasrul Humaimi and Mohammad Yusoff, Mohammad Faiz and Siddique, Jamal Akhter and Salim, Norita and Froemming, Gabriele R. A. and Sarian, Murni Nazira and Raghavendran, Hanumantha Rao Balaji and Kamarul, Tunku (2014) Microwave synthesis, characterization, bioactivity and in vitro biocompatibility of zeolite-hydroxyapatite (Zeo-HA) composite for bone tissue engineering applications. CERAMICS INTERNATIONAL, 40 (10). p. 16097. ISSN 0272-8842

Abdul Kadir, Mohammed Rafiq and Rosli, Ruwaida and Tunku Zainol Abidin, Tunku Kamarul Zaman (2014) Stability of cervical spine after one-level corpectomy using different numbers of screws and plate systems. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine, 228 (4). pp. 342-349. ISSN 0954-4119

Abdul Kadir, Mohammed Rafiq and Ulum, Mokhamad Fakhrul and Arafat, Andril and Noviana, Deni and Md Yusop, Abdul Hakim and Nasution, Ahmad Kafrawi and Hermawan, Hendra (2014) In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications. Materials Science and Engineering C, 36 (1). pp. 336-344. ISSN 0928-4931

Abdul Kadir, Mohammed Rafiq and Ramlee,, Muhammad Hanif Anif and Murali,, Malliga Raman and Kamarul,, T. (2014) Biomechanical evaluation of two commonly used external fixators in the treatment of open subtalar dislocation-A finite element analysis. Medical Engineering and Physics, 36 (10). pp. 1358-1366. ISSN 1350-4533

Abdul Rahim, Ruzairi and Awang, Effendi and Rahiman, Mohd. Hafiz Fazalul and Abdul Rahim, Herlina (2011) Biometrics applications. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 67-91. ISBN 978-967-354-181-2

Abdul Wahab, Mohd. Firdaus and Audu,, Jemilatu Omuwa (2014) Biohydrogen production by bacteria isolated from manures of three different bovines using synthetic starch wastewater as substrate. Malaysian Journal of Microbiology, 10 (1). pp. 38-47. ISSN 2231-7538

Abdul-Hamid M.I., (2012) Valuing Orang Asli dependency on forest: a Malaysian case. International Journal of Ecology and Development, 23 (3). pp. 1-24. ISSN 0972-9984

Abdullah, Norhayati and Muhammad Yuzir, Muhamad Ali and Abdullah, Saidahtul Atiqa Syabariah and Mansor Majdi, Najah and Shikh Md. Saud, Siti Fatin Raudhah (2014) Sequencing batch reactor for treatment of palm oil mill effluent. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (5). pp. 1242-1249. ISSN 0975-8585

Abdullah, Norhayati and Muhammad Yuzir, Muhamad Ali and Ashtari, Niloufar (2014) Reactivation of preserved aerobic granular sludge using palm oil mill effluent. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (4). pp. 519-527. ISSN 0975-8585

Abdullah, Rabi Atun Adawiah (2013) Designing primer for rapid detection of polluted river water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abu Izneid, Basem and Fadhel, M. I. and Al-Kharazi, Tareq and Ali, Malek and Miloud, Souiyah (2014) Design and develop a nondestructive infrared spectroscopy instrument for assessment of mango (Mangifera indica) quality. Journal of Food Science and Technology-Mysore, 51 (11). pp. 3244-3252. ISSN 0022-1155

Afroozeh, A. and Amiri, I. S. and Kouhvard, M. and Jalil, M. A. and Ali, J. and Yupapin, P. P. (2011) Optical dark and bright soliton generation and amplification. Enabling Science and Nanotechnology, 1341 . pp. 259-263. ISSN 0042-207X

Ahmad, Mohd. Ridzuan and Nakajima, Masahiro and Kojima, Seiji and Homma, Michio and Fukuda, Toshio (2011) Buckling nanoneedle for characterizing single cells mechanics inside environmental. IEEE Transactions on notechnology, 10 (2). pp. 226-236. ISSN 1536-125X

Ahmad, Mohd. Ridzuan and Nakajima, Masahiro and Kojima, Masaru and Kojima, Seiji and Homma, Michio and Fukuda, Toshio (2011) Fabrication and application of nanofork for measuring single cells adhesion force inside ESEM. Enabling Science and Nanotechnology, 1341 . pp. 304-308. ISSN 1743-3509

Ahmad Fauzi Ismail, (2013) Carbon dioxide stripping from diethanolamine solution through porous surface modified PVDF hollow fiber membrane contactor. Journal of Membrane Science, 427 . pp. 270-275. ISSN 0376-7388

Ahmad Fauzi Ismail, (2013) Synthesis and characterization of novel water soluble derivative of chitosan as an additive for polysulfone ultrafiltration membrane. Journal of Membrane Science, 440 . pp. 140-147. ISSN 0376-7388

Ahmad Fauzi Ismail, (2013) Synthesis, characterization and desalination study of composite nf membranes of novel poly[(4-aminophenyl)sulfonyl]butanediamide (pasb) and methyalated poly[(4-aminophenyl)sulfonyl]butanediamide (mpasb) with polysulfone (psf). Journal of Membrane Science, 428 . pp. 489-497. ISSN 0376-7388

Ali, A. A. M. and Salim, N. and Ahmed, R. E. and Binwahlan, M. S. and Suanmali, L. and Hamza, A. (2011) Pseudo genetic and probabilistic-based feature selection method for extractive single document summarization. Journal of Theoretical and Applied Information Technology, 32 (1). pp. 80-87. ISSN 1992-8645

Alireza, Lari and Sultana, Naznin and Zulkifli, Razauden Mohamed Ohamed (2014) Preparation and characterization of chitosan-hydroxyapatite nanoparticles for gene therapy. Advanced Materials Research, 1030-1 . pp. 2364-2367. ISSN 1022-6680

Andromeda, Trias and Yahya, Azli and Samion, Syahrullail and Baharom, Ameruddin and Hashim, Nor Liyana (2013) PID controller tuning by differential evolution algorithm on EDM servo control system. In: Applied Mechanics and Materials Vols. 284-287 (2013).

Ari, Zainab (2013) Degradation of remazol black B by bacillus cereus strain A from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Aryanto, Didik and Othaman, Zulkafli and Ismail, Abd. Khamim (2013) The impact of ASH3 overflow time and indium composition on the formation of self-assembleINXGAa1 − xas quantum dots studied by atomic force microscopy. Journal of Theoretical and Applied Physics, 7 (27). pp. 1-6. ISSN 2251-7235

As'ari, Muhammad Amir and Usman Ullah, Sheikh and Supriyanto, Eko (2014) 3D shape descriptor for object recognition based on Kinect-like depth image. Image and Vision Computing, 32 (4). pp. 260-269. ISSN 0262-8856

Ayob, Zahidah and Mohd. Bohari, Siti Pauliena and Samad, Azman Abd and Jamil, Shajarahtunnur (2014) Cytotoxic activities against breast cancer cells of local justicia gendarussa crude extracts. Evidence-Based Complementary and Alternative Medicine . ISSN 1741-427X

Azaman, A. and Kadri, N. A. and Abu Osman, N. A. (2013) Electromagnetic flux modeling of AC field over planar microarray dot electrodes used in dielectrophoretic lab-on-chip device. In: IFMBE Proceedings.

Azaman, A. and Yamamoto, S. I. (2013) Ankle joint stiffness and damping pattern under different frequency of translation perturbation. In: Applied Mechanics And Materials.

Aziz, Ramlan and Elsayed,, Elsayed Ahmed and Othman,, Nor Zalina and Malek,, Roslinda Abd and Awad,, Hassan Mohamed and Wu,, King and Wadaan,, Mohammad Ahmed M and El-Enshasy,, Hesham Ali (2014) Bioprocess development for high cell mass and endospore production by Bacillus thuringiensis var israelensis in semi-industrial scale. Journal of Pure and Applied Microbiology, 8 (4). pp. 2773-2783. ISSN 0973-7510

Azli Yahya, (2014) Dynamic modeling of electrical discharge machining (EDM) system using matlab. Applied Mechanics and Materials, 661 . pp. 176-182. ISSN 1660-9336

Abdul Kadir, Mohammed Rafiq and Sundaram, Sornambikai and Senthil Kumar, Annamalai and Jagannathan, Madhanagopal Gopal (2014) In situ stabilization of hydroxylamine via electrochemical immobilization of 4-nitrophenol on GCE/MWCNT electrodes: NADH electrocatalysis at zero potential. Analytical Methods, 6 (22). pp. 8894-8900. ISSN 1759-9660

B

Baharuddin, Mohd Yusof Usof and Shaikh Salleh, Sheikh Hussain and Zulkifly, Ahmad Hafiz and Lee, Muhammad Hisyam and Mohd Noor, Alias Mohd and Harris, Arief Ruhullah A. and Abdul Majid, Norazman Abdul and Kader, A. S.A. (2014) Design process of cementless femoral stem using a nonlinear three dimensional finite element analysis. BMC Musculoskeletal Disorders, 15 (1). ISSN 1471-2474

Badruzzaman, Aishah (2012) Analysing heavy metals using laser induced breakdown spectroscopy technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bagherbaigi, Saeedeh and Corcoles Perpinan, Emma Paola and Wicaksono, Dedy Hermawan Bagus (2014) Cotton fabric as an immobilization matrix for low-cost and quick colorimetric enzyme-linked immunosorbent assay (ELISA). Analytical Methods, 6 (18). pp. 7175-7180. ISSN 1759-9660

Bagus Wicaksono, Dedy Hermawan and Lam, Chee Leong and Zahidin, Nor Syahiran (2014) A preliminary study on the properties of a flexible circuit for wearable electrocardiography (ECG). IEEE TENSYMP 2014 - 2014 IEEE Region 10 Symposium . pp. 462-465.

Bagus Wicaksono, Dedy Hermawan and Yuen, Aoi Chee and Mohd Rajdi, Nik Nur Zuliyana and Lam, Chee Leong and Md. Saleh, Syaidah and Ahmad Bakir, Azam (2014) Proprioceptive sensing system for therapy assessment using cotton fabric-based biomedical microelectromechanical system. IEEE Sensors Journal, 14 (8). pp. 2872-2880. ISSN 1530-437X

Basem Abu Zneid, and Mohammed G. Al-Zidi, and Tareq Al-kharazi, (2014) Non-invasive blood pressure remote monitoring instrument based microcontroller. IEEE TENSYMP 2014 - 2014 IEEE Region 10 Symposium . pp. 248-253.

Bay, Huihan and Lim, Chikim and Kee, Thuanchien and Ware, Ismail and Chan, Giekfar and Shahir, Shafinaz and Ibrahim, Zaharah (2014) Decolourisation of Acid Orange 7 recalcitrant auto-oxidation coloured by-products using an acclimatised mixed bacterial culture. Environmental Science and Pollution Research, 21 (5). pp. 3891-3906. ISSN 0944-1344

Biroudian, Maral (2014) Detection of microsatellite polymorphism in Malaysian cultivated rice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Bostan, Hamed and Salim, Naomie and Hussein, Zeti Azura and Klappa, Peter and Sahmsir, Mohd. Shahir (2012) CMD: a database to store the bonding states of cysteine motifs with secondary structures. Advances in Bioinformatics . pp. 1-5. ISSN 1687-8027

C

Chai, Lian En and Tan Ah Chik @ Mohamad, Mohd. Saberi and Deris, Safaai and Chong, Chuiikhim and Choon, Yeewen and Omatu, Sigeru (2014) Current development and review of dynamic bayesian network-based methods for inferring gene regulatory networks from gene expression data. Current Bioinformatics, 9 (5). p. 539. ISSN 1574-8936

Chan, Giek Far and Abdul Rashid, Noor Aini and Mohd. Yusoff, Abdull Rahim and Lee, Suan Chua (2012) Biosynthesis of autoinducer-2 as the possible mechanism to enhance decolourisation of azo dye by citrobacter freundii Al. Journal Of Biological Sciences, 12 (2). pp. 91-97. ISSN 1727-3048

Chan, G. F. and Bamadhaj, H. M. and Gan, H. M. and Rashid, N. A. A. (2012) Genome sequence of aureobasidium pullulans AY4, an emerging opportunistic fungal pathogen with diverse biotechnological potential. Eukaryotic Cell, 11 (11). pp. 1419-1420. ISSN 1535-9778

Che Harun, Fauzan Khairi and Abdalla Sabeel, Thowiba Mohamed and Stephan, Enyinnaya Eluwa and Abdalla Sabeel, Solima Mohamed (2013) Detection of volatile compounds in urine using an electronic nose instrument. In: Proceedings - 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013.

Che Harun, Fauzan Khairi and Kiani, Mohammad Javad and Ahmadi, Mohammad Taghi and Akbari, Elnaz and Karimi, Hediyeh (2012) Graphene nanoribbon based gas sensor. In: Advanced Computational Engineering And Experimenting II.

Che Hasan, Rozaimi and Ierodiaconou, Daniel and Laurenson, Laurie (2012) Combining angular response classification and backscatter imagery segmentation for benthic biological habitat mapping. Estuarine Coastal And Shelf Science, 97 . pp. 1-9. ISSN 0272-7714

Che Sidik, Nor Azwadi and Nik Ibrahim, Nik Izual (2011) Numerical simulation of rural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Chong, Chun Shiong and Sabir,, Dana Khdr Hdr and Lorenz,, Astrid and Bontemps,, Cyril and Andeer,, Peter F. and Stahl,, David A. and Strand,, Stuart Edward and Rylott,, Rylott, Elizabeth L. and Bruce,, Neil C. (2014) Analysis of the xplAB-Containing Gene Cluster Involved in the Bacterial Degradation of the Explosive Hexahydro-1,3,5-Trinitro-1,3,5-Triazine. Applied and Environmental Microbiology, 80 (21). p. 6610. ISSN 0099-2240

Corcoles, E. P. and Deeb, S. and Han, G. and Boutelle, M. G. and Darzi, A. (2011) Adaptation of on-line rapid sampling microdianalysis to monitor human intestil ischaemia. Jurnal Teknologi (Sciences and Engineering), 54 . pp. 47-59. ISSN 0127-9696

Cupu, D. R. P. and Bahari, A. and Osman, K. and Md. Sheriff, J. (2013) Numerical analysis of elastohydrodynamic lubrication with non newtonian lubricant. In: Applied Mechanics And Materials.

D

Damayanti, Alia and Ujang, Zaini and Salim, Razman (2011) The influenced of pac, zeolite and moringa olifera as biofouling reducer (BFR) on hybrid membrane bioreactor of palm oil mill effluent (POME). Bioresource Technology, 102 (6). pp. 4341-4346. ISSN 0960-8524

Davoudi, Mohammad Mahd and Öchsner, Andreas (2013) On the accuracy of finite difference schemes for beam problems in the elastic range. In: Materialwissenschaft und Werkstofftechnik.

Dedy Hermawan Bagus Wicaksono, (2014) Effect of graphene oxide on the structural and electrochemical behavior of polypyrrole deposited on cotton fabric. Journal of Molecular Structure, 1075 . pp. 486-493. ISSN 0022-2860

Dedy Hermawan Bagus Wicaksono, (2014) Fiber based enzyme-linked immunosorbent assay for C-reactive protein. Sensors and Actuators, B: Chemical, 205 . pp. 50-60. ISSN 0925-4005

Dong, Jiyang and Kian, Kai Cheng and Xu, Jingjing and Chen, Zhong and Griffin, Julian L. (2011) Group aggregating normalization method for the preprocessing of NMR-based metabolomic data. Chemometrics and Intelligent Laboratory Systems, 108 (2). pp. 123-132. ISSN 0169-7439

Duha Alomar, and Azzmer Azzar Abdul Hamid, and Elham Khosrowabadi, and Ronnie, G. Gicana and Robert, J. Lamis and Fahrul Huyop, and Tengku Haziyamin Tengku Abdul Hamid, (2014) Molecular characterization of monochloroacetate-degrading arthrobacter sp strain D2 isolated from Universiti Teknologi Malaysia agricultural area. BIOREMEDIATION JOURNAL, 18 (1). pp. 12-19. ISSN 1088-9868

E

Eko Supriyanto, (2014) Enhanced blood compatibility of metallocene polyethylene subjected to hydrochloric acid treatment for cardiovascular implants. Biomed Research International . ISSN 2314-6133

Elengoe, Asita and Abu Naser, Mohammed and Hamdan, Salehhuddin (2014) Modeling and docking studies on novel mutants (K71L and T204V) of the ATPase domain of human heat shock 70 kDa protein 1. International Journal of Molecular Sciences, 15 (4). pp. 6797-6814. ISSN 1422-0067

F

Faezah Mohd. Salleh, and Nurul Shakina Mohd Talkah, and Mohd Shahir Shamsir, and Zaidah Rahmat, and Alina Wagiran, and Mohamad Roji Sarmidi, and Mohd Rafii Yusop, and Mohamed Hanafi Musa, (2014) MyRice: pangkalan data pengetahuan padi Malaysia. Jurnal Teknologi, 70 (6). pp. 93-97. ISSN 0127-9696

Fazilah Abdul Manan, and Zaharah Ibrahim, and Shafinaz Shahir, (2014) Plants in antarctica: current and future phytoremediation potential. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 59-65. ISSN 2180-3722

Fukuda, Toshio and Nakajima, Masahiro and Ahmad, Mohd. Ridzuan (2012) Nanorobotic manipulation for a single biological cell. In: Biologically Inspired Robotics. Intech, pp. 63-82. ISBN 978-953-51-0525-1

G

G. Alatiyah, Muna I. Hadi (2013) Genetic comparison of different human population groups using internal transcribed spacer sequence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Gasmelseed, A. and Yunus, Jasmy (2014) The effects of metamaterial on electromagnetic fields absorption characteristics of human eye tissues. Progress in Biophysics and Molecular Biology, 114 (1). pp. 8-12. ISSN 0079-6107

Ghazi, N. A. and Malek, N. A. N. N. and Hamdan, S. (2013) Cytostatic activity of clinoptilolite against human cervical cancer cell lines using three different media-sterilization techniques. In: Advanced Materials Research.

Goh, Kian Mau and Gan,, Han Ming and Chan,, Kokgan and Chan,, Giekfar and Shahar,, Saleha and Chong,, Chun Shiong and Kahar,, Ummirul Mukminin and Chai,, Kianpiaw (2014) Analysis of anoxybacillus genomes from the aspects of lifestyle adaptations, prophage diversity, and carbohydrate metabolism. Plos One, 9 (3). ISSN 1932-6203

Goh, Kian Mau and Shahir, Shafinaz and Velayudhan, Ranjani and Chai, Kian Piaw and Stefan, Janecek and Raja Abdul Rahman, Raja Noor Zaliha and Kok, Gan Chan (2014) Protein engineering of selected residues from conserved sequence regions of a novel Anoxybacillus α-amylase. Scientific Reports, 4 . ISSN 2045-2322

Goh, Kian Mau and Shahir, Shafinaz and Velayudhan, Ranjani and Chai, Kian Piaw and Stefan, Janecek and Raja Abdul Rahman, Raja Noor Zaliha and Kok, Gan Chan (2014) Protein engineering of selected residues from conserved sequence regions of a novel Anoxybacillus alpha-amylase. Scientific Reports, 4 . ISSN 2045-2322

Guramad Singh, Sharon Kaur (2013) Enzyme sub-functional class prediction using multi-biological knowledge feature representation and twin support vector machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

H

Hermawan, Hendra and Saarani,, Nur Najiha and Jamuna-Thevi,, Kalitheertha and Muhamad,, Ida Idayu (2014) Antibacterial properties of guided bone regeneration membrane for periodontal applications. Applied Mechanics and Materials, 606 . pp. 47-50. ISSN 1660-9336

Hadi Hezaveh, (2012) Impact of metal oxide nanoparticles on oral release properties of ph-sensistive hydrogel nanocomposites. International Journal of Biological Macromolecules, 50 . pp. 1334-1340. ISSN 0141-8130

Han, Ming Gan and Ibrahim, Zaharah and Shahir, Shafinaz and Yahya, Adibah (2011) Identification of genes involved in the 4-aminobenzenesulfote degradation pathway of hyrogenophaga sp.PBC via transposon mutagenesis. FEMS Microbiology Letters, 318 (2). pp. 108-114. ISSN 0378-1097

Harruddin, Norlisa and Othman, Norasikin and Idris, Ani and Ooi, Zing Yi and Goto, Masahiro (2014) Supported liquid membrane extraction of reactive dye using fabricated polypropylene membrane. Journal of Chemical Engineering of Japan, 47 (10). pp. 761-769. ISSN 0021-9592

Hermawan, Hendra and Mantovani, D. (2013) Susceptibility to stress corrosion cracking of fe-35mn alloy under a pseudo-physiological condition. In: Applied Mechanics And Materials.

Hidayah Jamalnasir, and Alina Wagiran, and Noor Azmi Shaharuddin, and Azman Abd Samad, (2014) Molecular cloning and characterization of a cDNA encoding a polyketide synthase from Melastoma decemfidum. BIOLOGIA, 69 (11). pp. 1482-1491. ISSN 0006-3088

Hossain, Md Belayet and Lai, Khin Wee and Pingguan-Murphy, Belinda and Hum, Yan Chai and Mohamad Salim, Maheza Irna and Liew, Yihmiin (2014) Contrast enhancement of ultrasound imaging of the knee joint cartilage for early detection of knee osteoarthritis. Biomedical Signal Processing and Control, 13 (1). pp. 157-167. ISSN 1746-8108

Huyop, Fahrul Zaman and Khosrowabadi, Elham (2014) Screening and characterization of several 2,2-dicholoropropionic acid-degrading bacteria isolated from marine sediment of danga bay and east coast of Singapore Island. Bioremediation Journal, 18 (1). pp. 20-27. ISSN 1088-9868

I

Iqbal, N. and Kadir, M. R. A. and Mahmood, N. H. B. and Moses, M. and Salim, M. B. M. and Malek, N. A. N. N. (2013) Effect of silver ions on the structural and antibacterial properties of bone replacement material. In: Advanced Materials Research.

Ishak, Muhammad Farhan and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah and Abdul Rahman, Shaifuzain (2014) The effect of cannulated screw placement angle in the management of femoral neck fracture. Advanced Materials Research, 845 . pp. 216-220. ISSN 1022-6680

Ismail, Ahmad Fauzi and Aziz, Farhana (2012) Chemical cross-linking modifications of polymeric membranes for gas separation applications. In: Membrane Modification Technology and Applications. CRC Press, pp. 363-383. ISBN 978-1-4398-6635-1

Ismail, Ahmad Fauzi and Rahim, N. H. and Mustafa, A. and Matsuura, Takeshi and Ng, B. C. and Abdullah, Mohd. Sohaimi and Hashemifard, S. A. (2011) Gas separation performance of polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes. Separation and Purification Technology, 80 . pp. 20-31. ISSN 1383-5866

J

Jaafar, Juha and Ismail, Ahmad Fauzi and Matsuura, T. and Gai, K. (2011) Performance of speek based polymer-noclay inorganic membrane for DMFC. Journal of Membrane Science, 382 . pp. 202-211. ISSN 0376-7388

Jaafar, Juhana and Ismail, Ahmad Fauzi and Norddin, Mohammad Noorul Anam and Matsuura, Takeshi (2012) Modification of sulfonated poly (ether ether ketone) for DMFC application. In: Membrane Modification Technology and Applications. Penerbit UTM, Skudai, Johor, pp. 113-128. ISBN 978-967-354-187-4

Jaganathan, Saravana Kumar and Supriyanto, Eko and Vignesh, Muthu and Narasimhan, Gayathri (2014) Role of pomegranate and citrus fruit juices in colon cancer prevention. World Journal of Gastroenterology, 20 (16). pp. 4618-4625. ISSN 1007-9327

Jahromi, Soudabeh Sabetian Fard and Shamsir, Mohd. Shahir (2013) Construction and analysis of the cell surface’s protein network for human sperm-egg interaction. ISRN BIoinformatics . pp. 1-8. ISSN 2090-7346

Jamaluddin, Haryati and Teo,, Chee Loong and Zain,, Nor Azimah Mohd and Idris,, A (2014) Biodiesel production via lipase catalysed transesterification of microalgae lipids from Tetraselmis sp. Renewable Energy, 68 . pp. 1-5. ISSN 0960-1481

Jamuna-Thevi, Kalitheertha and Saarani, Nur Najiha Ajiha and Abdul Kadir, Mohammed Rafiq and Hermawan, Hendra (2014) Triple-layered PLGA/nanoapatite/lauric acid graded composite membrane for periodontal guided bone regeneration. Materials Science and Engineering C, 43 . pp. 253-263. ISSN 0928-4931

Javed, Muhammad Arshad and Mohd Din, Abd Rahman Jabir and Hanapi, Siti Zujaiha and Zainul Alam, Siti Atiqah and Lee, Chewtin and Sarmidi, Mohamad Roji (2014) Germination, seedling growth, amylase and protease activities in Malaysian upland rice seed under microbial inoculation condition. Journal of Pure and Applied Microbiology, 8 (4). pp. 2627-2635. ISSN 0973-7510

Jenol, Mohd. Azwan and Ibrahim, Mohamad Faizal and Phang, Lai Yee and Md. Salleh, Madihah and Abd-Aziz, Suraini (2014) Sago biomass as a sustainable source for biohydrogen production by clostridium butyricum A1. BioResources, 9 (1). pp. 1007-1026. ISSN 1930-2126

Jeong, Jin Soo (2013) Minimum phase whitening filter to speech beamforming technique. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Jeong Jinsoo, (2014) Normalized estimate of adaptive filter for non-minimum phase transfer function component: an illustrative case study. Neurocomputing, 133 . pp. 295-308. ISSN 0925-2312

K

Kanaraju, Devagi (2002) Kajian penyingkiran logam toksik daripada air larian oleh spesis tumbuh-tumbuhan di tasik-tasik paya indah dan sel-sel wetland Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Karananidi, Padmini (2014) Metal tolerance and organic compound utilization of Bacillus species originated from wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Kartiko, Nugroho and Yahya, Azli and Nor Liyana, Hashim Safura and Syahrullail, S. and Razak Daud, M. D. (2014) Development of computer-aided EDM for machining micropits on spherical surface of hip implant. Applied Mechanics and Materials, 554 . pp. 541-545. ISSN 1660-9336

Kikuchi, Akira and Ismail, Nor Eman and Janalizadeh, Narges and Mutah, Musa and Faiz, Muhamad (2013) Convenient multi-parameter water quality analysis by onsite filtered sample for eutrophication monitoring. International Journal of Geomate, 5 (1). pp. 605-609. ISSN 2186-2982

L

Latifehossadat, Madanian and Syed Mansor, Syed Mohamed Shafeq and Omar, Abdul Hafidz (2013) Marital satisfaction of Iranian female students in Malaysia: a qualitative study. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Lau Woei Jye, (2013) Effect of surface pattern formation on membrane fouling and its control in phase inversion process. Journal of Membrane Science, 446 . pp. 326-331. ISSN 0376-7388

Lor Huai Chong, and Mim Mim Lim, and Naznin Sultana, (2014) Polycaprolactone(PCL)/gelatin(Ge)-based electrospun nanofibers for tissue engineering and drug delivery application. Applied Mechanics and Materials, 554 . pp. 57-61. ISSN 1660-9336

M

Malon, Radha Swathe Priya and Chua, K. Y. and Bagus Wicaksono, Dedy Hermawan and Córcoles, E. P. (2014) Cotton fabric-based electrochemical device for lactate measurement in saliva. Analyst, 139 (12). pp. 3009-3016. ISSN 1364-5528

Muhammad Jabir Suleiman, and Mohamad Azmirruddin Bin Ahmad, and Rosdi Bin Ibrahim, and Mazlan Bin Mohamad, and Noorhayaty Binti Abu Kasim, and ohammed Rafiq Abdul Kadir, and Shamsul Muhamad, and Yoshinori Itoh, and Kotaro Hanada, and Toru Shimizu, (2014) Physical and mechanical properties of sintered titanium alloy produced through metal injection molding (MIM) process for craniofacial application. Advanced Materials Research, 879 . pp. 85-89. ISSN 1022-6680

Muhammadu Masin Muhammadu, and Kahar Osman, and Esah Hamzah, (2014) Numerical methodology to determine fluid flow pattern with corrosion in pipe bends using computational fluid dynamics software. ARPN Journal of Engineering and Applied Sciences, 9 (10). pp. 1978-1982. ISSN 1819-6608

Madfa, Ahmed Ali A. and Abdul Kadir, Mohammed Rafiq and Kashani, Jamal and Saidin, Syafiqah and Sulaiman, Eshamsul and Marhazlinda, Jamaludin and Rahbari, Reza G. and Abdullah, Basri Johan Jeet and Abdullah, Hadijah and Abu Kasim, Noor Hayaty (2014) Stress distributions in maxillary central incisors restored with various types of post materials and designs. Medical Engineering and Physics, 36 (7). pp. 962-967. ISSN 1873-4030

Madihah Md. Salleh, (2014) Effect of physical pretreatment on shrimp waste for the chitinase production under solid state fermentation by Trichoderma virens. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 91-94. ISSN 0127-9696

Maheza Irna Mohamad Salim, and Yan Chai Hum, and Khin Wee Lai, (2014) Multiobjectives bihistogram equalization for image contrast enhancement. COMPLEXITY, 20 (2). p. 36. ISSN 1076-2787

Mahmud, Nazriah and Yahya, Azli and Abdul Kadir, Mohammed Rafiq and Andromeda, Trias and Hashim, Nor Liyana Safura (2013) Modeling of flyback converter for micro machining biomedical component. In: Applied Mechanics and Materials 284-287.

Mahmud, Nazriah and Yahya, Azli and Andromeda, Trias and Hashim, Nor Liyana Safura (2014) Design and implementation of flyback converter for electrical discharge machining power generator. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 65-70. ISSN 2180-3722

Malarvili Balakrishnan, (2014) Development of spectral delayed luminescence system for whole saliva analysis: a prototype study. Jurnal Teknologi (Sciences and Engineering), 67 (1). pp. 7-14. ISSN 0127-9696

Malek, N. A. N. N. and Ishak, S. A. and Kadir, M. R. A. (2013) Antibacterial activity of copper and CTAB modified clays against pseudomonas aeruginosa. In: Advanced Materials Research.

Malon, Radha S. P. and Sadir, Sahba and Balakrishnan, Malarvili and Córcoles, Emma P. (2014) Saliva-based biosensors: noninvasive monitoring tool for clinical diagnostics. Biomed Research International . ISSN 2314-6133

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2011) Preparation and characterization of porous PVDF hollow fiber membranes for co2 absorption: effect of different non-solvent additives in the polymer dope. International Journal of Greenhouse Gas Control, 5 . pp. 640-648. ISSN 1750-5836

Margahny, Maged and Zabidi, Noradilawaty and Wan Kadir, Wan Hazli and Hashim, Mazlan (2011) Polarization synthetic aperture radar (SAR) data fpe mapping coastal zone vegetation. International Journal of Physical Sciences, 6 (29). pp. 6623-6629. ISSN 1992-1950

Marvibaigi, Mohsen and Amini, Neda and Supriyanto, Eko and Jamil, Shajarahtunnur and Abdul Majid, Fadzilah Adibah and Khangholi, Shahpour (2014) Total phenolic content, antioxidant and antibacterial properties of Scurrula ferruginea extracts. Jurnal Teknologi, 70 (5). pp. 65-72. ISSN 0127-9696

Marvibaigi, Mohsen and Supriyanto, Eko and Amini, Neda and Abdul Majid, Fadzilah Adibah and Jaganathan, Saravana Kumar (2014) Preclinical and clinical effects of mistletoe against breast cancer. BIOMED RESEARCH INTERNATIONAL . ISSN 2314-6133

Md. Salleh, Madihah and Kahar, Ummirul Mukminin and Goh, Kian Mau (2014) Medium optimization for pullulanase production from anoxybacillus species using experimental design. Indian Journal of Biotechnology, 13 (1). pp. 89-97. ISSN 0975-0967

Md. Salleh, Madihah and Shankar,, Ravi and Mohamad,, Shaza Eva and Nur Aswati,, K. O. and Suraini,, A. A. and Kamarulzaman,, K. (2014) Application of different feeding strategies in fed batch culture for pullulanase production using sago starch. Carbohydrate Polymers, 102 (1). pp. 962-969. ISSN 0144-8617

Minhat, Ade Erawan and Yahya, Azli and Khamis, Nor Hisham and Samosir, Ahmad Saudi and Abdul Rahim, Muhammad Arif and Andromeda, Trias and Nugroho, Kartiko (2014) Model of pulse power generator in electrical discharge machining (EDM) system. Applied Mechanics and Materials, 554 . pp. 613-617. ISSN 1660-9336

Minhat, Ade Erawan and Yahya, Azli and Khamis, Nor Hisham and Syahrullail, Samion and Zurkarmawan, Abu Bakar and Trias, Andromeda (2014) Power generator of Electrical Discharge Machining (EDM) system. Applied Mechanics and Materials, 554 . pp. 638-642. ISSN 1660-9336

Misman, Muhammad Faiz and Mohamad, Mohd. Saberi and Deris, Safaai and Mohd. Hashim, Siti Zaiton and Leham, Nurdyana and Ibrahim, Zuwairie (2012) A tuning parameter selector method for the gSVM-SCAD in determining significant genes and biological pathways. ICIC Express Letters, 6 (4). pp. 851-856. ISSN 1881-803x

Mohamad, Shaza Eva and Jamaluddin, Haryati and Md. Salleh, Madihah and Ibnu Rasid, Elda Nurafnie (2014) Screening factors influencing the production of astaxanthin from freshwater and marine microalgae. Applied Biochemistry and Biotechnology, 172 (4). pp. 2160-2174. ISSN 1559-0291

Mohamed Mahmoud Nasef, (2013) Optimization and kinetics of phosphoric acid doping of poly(1-vinylimidazole)-graft-poly(ethylene-co-tetrafluorethylene) proton conducting membrane precursors. Journal of Membrane Science, 446 . pp. 422-432. ISSN 0376-7388

Mohamed Rafiq Abdul Kadir, (2014) Dipcoating of poly (epsilon-caprolactone)/hydroxyapatite composite coating on Ti6Al4V for enhanced corrosion protection. Surface and Coatings Technology, 245 . pp. 102-107. ISSN 0257-8972

Mohammed Rafiq Abdul Kadir, (2014) Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of a Mg/HA/TiO2/MgO nanocomposite. Ceramics International, 40 (10). p. 16759. ISSN 0272-8842

Mohammed Rafiq Abdul Kadir, (2014) Finite element analysis of three commonly used external fixation devices for treating Type III pilon fractures. Medical Engineering and Physics, 36 (10). pp. 1322-1330. ISSN 1350-4533

Mohd. Arif, Shahkila (2013) Molecular phylogeny of selected mango cultivars based on internal transcribed spacer (ITS) region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Noor, Nurzahwani and Zakaria, Zainoha and Md. Salleh, Madihah and Abd. Manaf, Muhammad Suhaimee (2011) Production of protein liquor by microbial fermentation of prawn waste. In: Bacteria in Environmental Biotechnology: The Malaysian Case Study-Analysis, Waste Utilization and Wastewater Remediation. Nova Science Publishers, Inc., Hauppauge, New York, pp. 71-83. ISBN 978-1-61728-350-5

Mohd. Rahim, Mohd. Shafry and Tekkesinoglu, Sule and Rehman, Amjad and Mat Amin, Ismail and Saba, Tanzila (2014) Hevea leaves boundary identification based on morphological transformation and edge detection features. Research Journal of Applied Sciences, Engineering and Technology, 7 (12). pp. 2447-2451. ISSN 2040-7467

Mohd. Sanip, Suhaila and Ismail, Ahmad Fauzi and Goh, Pei Sean and Soga, T. and Tanemura, M. and Yasuhiko, H. (2011) Gas separation properties of functionalized carbon nanotubes mixed matrix membranes. Separation and Purification Technology, 78 . pp. 208-213. ISSN 1383-5866

Mohd. Yusof, Alias and Yanta, Nur Fajar and Khali, Abdul (2003) Bivalves as bio-indicators of marine pollution in the management coastal area. In: Technical Seminar On Shoreline Management, 2003, Kota Kinabalu, Sabah, Malaysia.

Mohd. Yusof, Baharuddin and Shaikh Salleh, Sheikh Hussain and Hamedi, Mahyar and Zulkifly, Ahmad Hafiz and Lee, Muhammad Hisyam and Mohd. Noor, Alias and A. Harris, Arief Ruhullah and Abdul Majid, Norazman (2014) Primary stability recognition of the newly designed cementless femoral stem using digital signal processing. Biomed Research International, 2014 . ISSN 2314-6133

Mohd. Zain, Nor Azimah and Seker, Darshini Chandera (2014) Response surface optimization of glucose production from liquid pineapple waste using immobilized invertase in PVA-alginate-sulfate beads. Separation and Purification Technology, 133 . pp. 48-54. ISSN 1383-5866

Mohd. Zulkifli, Razauden and Chiet,, Chong Hang and Hidayat,, Topik and Ya’Akob,, Harisun (2014) Bioactive compounds and antioxidant activity analysis of Malaysian pineapple cultivars. 4th International Conference on Mathematics and Natural Sciences (ICMNS 2012)L: Science For Health, Food and Sustainable Energy, 1589 . pp. 398-399. ISSN 0094-243X

Mohd. Zulkifli, Razauden and Zakaria,, Nursyahda and Md Akhir,, Fazrena Nadia and Basar,, Norazah (2014) Anti-oxidant properties and polyphenolic profile screening of Vitis vinifera stems and leaves crude extracts grown in Perlis, Malaysia. 4th International Conference on Mathematics and Natural Sciences (ICMNS 2012)L: Science For Health, Food and Sustainable Energy, 1589 . pp. 288-291. ISSN 0094-243X

Mohtar, S. S. and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2011) Preparation and characterization of speek/ mmt-sta composite membrane for DMFC application. Journal of Membrane Science, 371 . pp. 10-19. ISSN 0376-7388

Mozafari, H. and Ayob, A. and Alias, A. (2011) Transmission conditions between carbon fiber and epoxy matrix for thin interphases. Key Engineering Materials, 471-47 . pp. 857-861. ISSN 1013-9826

MS Aziz, (2012) Optical manipulation of nano-micro needle array for large volume molecular diagnosis. Artificial Cells, Bloods Substitutes and Biotechnology, 40 (4). pp. 266-270. ISSN 1073-1199

Muhamad, N. A. (2011) Test cell for polarization and depolarization current test of transformer insulation oil. Jurnal Teknologi (Special Edition-Instrumentation & Sensor Technology) (54). pp. 343-359. ISSN 0127–9696

Muhamad Asyraf Mohd. Pouzi, (2013) Three-tier detection and multi-level synergy for coastal mixed-land zone classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Muhamad Zain, Norhidayu and Hussain, Rafaqat and Abdul Kadir, Mohammed Rafiq (2014) Surface modification of yttria stabilized zirconia via polydopamine inspired coating for hydroxyapatite biomineralization. Applied Surface Science, 322 . pp. 169-176. ISSN 0169-4332

Munoz-Rojas, P. A. and Carniel, T. A. and Silva, E. C. N. and Ochsner, A. (2011) Optimization of a unit periodic cell in lattice block materials aimed at thermo-mechanical applications. Advanced Structured Materials, 2 . pp. 301-345. ISSN 1869-8433

Mustafa, (2012) Reactive power tracing in pool-based power system utilising the hybrid genetic algorithm and least squares support vector machine. IET Generation Transmission & Distribution, 6 (2). pp. 133-141. ISSN 1751-8687

Muttakin, Imamul and Supriyanto, Eko (2013) Medical ultrasound power measurement system using PVDF sensor and FPGA technology. In: IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2013, 6th-9th May 2013, Minneapolis, MN, USA.

N

Naznin Sultana, (2014) Fabrication and characterization of polycaprolactone (PCL)/gelatin electrospun fibers. Applied Mechanics and Materials, 554 . pp. 52-56. ISSN 1660-9336

Naznin Sultana, (2014) Fabrication of Nanohydroxyapatite/Poly(caprolactone) composite microfibers using electrospinning technique for tissue engineering applications. Journal of Nanomaterials . ISSN 1687-4110

Naznin Sultana, (2014) Natural-synthetic polymer blend composite scaffold for bone tissue engineering: study of in vitro degradation and protein adsorption. Applied Mechanics and Materials, 554 . pp. 42-46. ISSN 1660-9336

Nik Ahmad Nizam Nik Malek, (2014) Effect of natural zeolite (clinoptilolite) and urea on the growth of Amaranthus gangeticus, Clinachantus nutans and Capsicum annuum. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 141-145. ISSN 2180-3722

Nik Ahmad Nizam Nik Malek, and Craig D. Williams, and Sivabalan Dhanabal, and Hardave Singh Bhall, and Norahim Ibrahim, (2014) Natural clinoptilolite and chabazite as carrier for antibacterial agents of cetylpyridinium chloride (CPC) and silver. Applied Mechanics and Materials, 606 . pp. 29-33. ISSN 1660-9336

Noor Azmi, Azran Azhim and Nurul Fatin Syazwani, Nurul Fatin Syazwani and Morimoto, Yuji and Furukawa, Katsuko and Ushida, Takashi (2014) The use of sonication treatment to decellularize aortic tissues for preparation of bioscaffolds. Journal of Biomaterials Applications, 29 (1). pp. 130-141. ISSN 1530-8022

Nordin, J. A. and Nasution, A. K. and Hermawan, H. (2013) Can the current stent manufacturing process be used for making metallic biodegradable stents. In: Advanced Materials Research.

O

Omar, Mohd. Shahir Shamsir and Sudi, Ismaila Yada Ada and Abdul Hamid, Azzmer Azzar and Jamaluddin, Haryati and Abdul Wahab, Roswanira and Huyop, Fahrul Zaman (2014) Insights into the stereospecificity of the d-specific dehalogenase from Rhizobium sp. RC1 toward D-and L-2-chloropropionate. Biotechnology and Biotechnological Equipment, 28 (4). pp. 608-615. ISSN 1310-2818

Oh, Myoung-Jin and Abdul Hamid, Mariani and Ngadiran, Sulaiman and Seo, Young-Kwon and Sarmidi, Mohamad Roji and Chang, Seo Park (2011) Ficus deltoidea (mas cotek) extract exerted anti-melanogenic activity by preventing tyrosinase activity in vitro and by suppressing tyrosinase gene expression in b16f1 melanoma cells. Archives of Dermatological Research, 303 (3). pp. 161-170. ISSN 0340-3696

Omar, Abdul Hafidz (2014) Spinal cord injury rehabilitation: which way forward? NeuroRehabilitation, 35 (2). pp. 325-340. ISSN 1053-8135

Omar, Mohd. Shahir Shamsir and Mienda, Bashir Sajo (2014) In silico gene knockout metabolic interventions in Escherichia coli for enhanced ethanol production on glycerol. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (4). pp. 964-974. ISSN 0975-8585

Omar, Mohd. Shahir Shamsir and Mienda, Bashir Sajo and Shehu, Idris and Ali Deba, Abdulkarim and Galadima, Ibrahim A. (2014) In silico metabolic engineering interventions of Escherichia coli for enhanced ethanol production, based on gene knockout simulation. IIOAB Journal, 5 (2). pp. 16-23. ISSN 0976-3104

Omar, Mohd. Shahir Shamsir and Sabetian, Soudabeh and Naser, Mohammed Abu (2014) Functional features and protein network of human sperm-egg interaction. Systems Biology in Reproductive Medicine, 60 (6). p. 337. ISSN 1939-6368

Omar, Mohd. Shahir Shamsir and Sabetian, Soudabeh and Naser, Mohammed Abu and Mienda, Bashir Sajo (2014) Gene expression profiles of spermatozoa in teratozoospermia. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (6). pp. 818-823. ISSN 0975-8585

Omar, Mohd. Shahir Shamsir and Sudi, Ismaila Yada and Jamaluddin, Haryati and Abdul Wahab, Roswanira and Huyop, Fahrul (2014) Interactions of non-natural halogenated substrates with D-specific dehalogenase (DehD) mutants using in silico studies. Biotechnology and Biotechnological Equipment, 28 (5). pp. 949-957. ISSN 1310-2818

Omar, Mohd. Shahir Shamsir and Zulkifli, I. and Shaiful, M. A R and Amirah, N. A. and Shakina, N. M T and Shahfiz, M. A. (2014) Izoo mobile: mobile application for mobile assisted Malaysia fauna database Izoo. Jurnal Teknologi, 71 (5). pp. 95-97. ISSN 0127-9696

Omar M., Rijal and A. Abdullah, Norli and M. Isa, Zakiah and M. Noor, Norliza and Tawfiq, Omar F. (2012) A probability distribution of shape for the dental maxillary arch using digital images. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 5420-5423. ISSN 1557-170X

Ong, Rui Min and Md. Alias, Rosli and Kamaruddin, Kamarulzaman and Hassan, Osman and Abdul Rashid, Noor Aini and Rahman, Kamalesh and Abdul Rahman, Roshanida and Nik Mahmood, Nik Azmi (2003) Cloning and sequencing of CGTase gene from bacillus sp G1. In: National Biotechnology Seminar: DNA 50 Years and Beyond 2003, 2003, Selangor.

Ong Sang Bing, (2014) DJ-1 protects against cell death following acute cardiac ischemia-reperfusion injury. Cell Death and Disease, 5 (2). ISSN 2041-4889

Othman, Mohd. Afzan and Mat Safri, Norlaili (2012) Characterization of ventricular arrhythmias using a semantic mining algorithm. Journal of Mechanics in Medicine and Biology, 12 (3). pp. 1250049-1. ISSN 0219-5194

P

Parveen, Bushra and Chew, Teong Han and Shamsir Omar, Mohd. Shahir and Ahmad, Norhayati (2014) Development of a mobile application for amphibian species recognition. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Q

Qindeel, Rabia and Bidin, Noriah and Mat Daud, Yaacob (2007) Diagnose and investigation of angular distribution of copper plasma ions. In: RSM 2007 Proceeding, 2007.

R

Rahmat, Zaidah (2014) A glance on medical applications of Orthosiphon stamineus and some of its oxidative compounds. International Journal of Pharmaceutical Sciences Review and Research, 24 (2). pp. 83-88. ISSN 0976-044X

Rahmat, Zaidah and Wagiran, Alina and Mohd. Nazir, Nurain and Mohd. Arif, Shahkila and Zulkifli, Siti Nur Ain and Abd. Samad, Azman and Shamsir, Mohd. Shahir and Mohd. Salleh, Faezah and Sarmidi, Mohamad Roji (2014) Potensi padi bukit sebagai alternatif kepada padi sawah. Jurnal Teknologi, 70 (6). pp. 89-92. ISSN 0127-9696

Ramlee, Muhammad Hanif Anif and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah (2014) Three-dimensional modelling and finite element analysis of an ankle external fixator. Advanced Materials Research, 845 . pp. 183-188. ISSN 1022-6680

Ramlee, Muhammad Hanif Anif and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah (2013) Three-dimensional modelling and finite element analysis of an ankle external fixator. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Razmara, (2012) TS-amir: a topology string alignment method for intensive rapid protein structure comparison. Algorithms For Molecular Biology, 7 (1). ISSN 1748-7188

S

Sarmidi, Mohamad Roji and Zubairi, Saiful Irwan and R. A., Aziz (2014) Bio-active constituents of rotenoids resin extracted from Derris elliptica roots: comparison between local plant extract and SAPHYR (France) cube resin. Advances in Environmental Biology, 8 (4). pp. 904-909. ISSN 1998-1066

Saeed, Faisal and Ahmed, Ali Husain and Omar, Mohd. Shahir Shamsir and Salim, Naomie (2014) Weighted voting-based consensus clustering for chemical structure databases. Journal of Computer-Aided Molecular Design, 28 (6). pp. 675-684. ISSN 0920-654X

Sahadevan Rajesh, (2012) Structure-property interplay of poly(amide-imide) and TIO2 nanoparticles impregnated poly(ether-sulfone) asymmetric nanofiltration membranes. RSC Advances, 2 (17). pp. 6854-6870. ISSN 2046-2069

Salehhuddin Hamdan, (2014) Evaluation of hyperthermia effect on cell viability using crystal violet staining, LDH and trypan blue assays. Advances in Environmental Biology, 8 (3). pp. 744-747. ISSN 1998-1066

Samdin, S. Balqis and Ting, Chee-Ming and Salleh, Sh-Hussain and Ariff, A.K. and Noor, A. B. Mohd (2013) Linear dynamic models for classification of single-trial EEG. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC), JUL 03-07, 2013, Osaka, Japan.

Sanagi, Mohd. Marsin and Raharjo, Yanuardi and Wan Ibrahim, Wan Aini and Abu Naim, Ahmedy and Salleh, Syairah and Miskam, Mazidatulakmam (2012) Surface treatment and characterization of polypropylene hollow fibers by sol-gel method for liquid phase microextraction. In: Sustainable Membrane Technology for Energy, Water and Environment. Penerbit UTM, Skudai, Johor, pp. 45-52. ISBN 978-967-354-186-7

Sarat Chandra Tripathy, (2012) Modification of the vertically generalized production model for the turbid waters of Ariake Bay, Southwestern Japan. Estuarine Coastal And Shelf Science, 97 . pp. 66-77. ISSN 0272-7714

Sarmidi, Mohamad Roji and Taher, M. and Abdul Majid, Fadzilah Adibah (2003) Effect of chalcone polymer and chromium picolinate on cell profiferation and glucose metabolism of 3T3-L1 adipocytes. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Shafii, Nadia Shaira and Darlis, Nofrizalidris and Dillon, Jeswant and Osman, Kahar and Md. Khudzari, Ahmad Zahran (2014) The effect of internal profile on cannula outflow. WSEAS Transactions on Fluid Mechanics, 9 (1). pp. 187-195. ISSN 1790-5087

Shahir, Shafinaz and Asadi, Somayeh and Ibrahim, Zaharah and Yahya, Adibah A. and Salleh, Madihah Md D. and Ibrahim, Norahim and Jamaluddin, Haryati and Abdul-Wahab, Mohd Firdaus and Abd Manan, Fazilah and Hussin, Huszalina and Chong, Chun Shiong and Wan Dagang, Wan Rosmiza Zana (2014) Isolation and characterization of metal and antibiotic resistant psychrotrophic bacteria from refrigerated spoiled food. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 131-135. ISSN 2180-3722

Shaikh Salleh, Sheikh Hussain and Hamedi,, Mahyar and Noor,, Alias Mohd Mohd and Astaraki,, Mehdi R (2014) Comparison of multilayer perceptron and radial basis function neural networks for EMG-based facial gesture recognition. 8th International Conference on Robotic, Vision, Signal Processing & Power Applications: Innovation Excellence Towards Humanistic Technology, 291 LN . pp. 285-294. ISSN 1876-1119

Shaikh Salleh, Sheikh Hussain and Ting,, Chee-Ming and Zainuddin,, Zaitul Marlizawati and Bahar,, Arifah (2014) Artifact removal from single-trial ERPs using Non-Gaussian Stochastic Volatility Models and particle filter. IEEE Signal Processing Letters, 21 (8). pp. 923-927. ISSN 1070-9908

Shamsir, Mohd S. and Al-Hadi, Muhammad and Nik Wan, Nik Ahmad Firdaus (2009) Collaborative curation in marine biodiversity informatics. In: International Conference of Marine Ecosystems (INCOME 09), 26-28 May 2009, Langkawi Island, Kedah, Malaysia.

Sheikh Hussain Shaikh Salleh, (2014) Fabrication of low-cost, cementless femoral stem 316L stainless steel using investment casting technique. Artificial Organs, 38 (7). pp. 603-608. ISSN 0160-564X

Sheikh Hussain Shaikh Salleh, and Mahyar Hamedi, and Alias Mohd Noor, and Iman Mohammad-Rezazadeh, (2014) Neural network-based three-class motor imagery classification using time-domain features for BCI applications. IEEE TENSYMP 2014 - 2014 IEEE Region 10 Symposium . pp. 204-207.

Sheikh Hussein Shaikh Salleh, (2014) Estimating dynamic cortical connectivity from motor imagery EEG using KALMAN smoother & EM algorithm. IEEE Workshop on Statistical Signal Processing Proceedings . pp. 181-184.

Sheikh Hussein Shaikh Salleh, (2014) Estimation of high-dimensional brain connectivity from FMRI data using factor modeling. IEEE Workshop on Statistical Signal Processing Proceedings . pp. 73-76.

Sheikh Hussein Shaikh Salleh, and Mohd Yusof Baharuddin, and Ahmad Hafiz Zulkifly, and Muhammad Hisyam Lee, and Alias Mohd Noor, (2014) Morphological study of the newly designed cementless femoral stem. BIOMED RESEARCH INTERNATIONAL . ISSN 2314-6133

Sukmana, Irza and Djuansjah, J.R.P. (2013) Sandwiched polymer fibre in fibrin in matrices for the dictation of endothelial cells undergoing angiogenesis. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013), 24 January 2013 - 25 January 2013, Jakarta; Indonesia.

Sukmana, Irza and Vadival, G. N. (2014) Effect of mechanical and biophysical properties of fibrin gel on microvascual development in a three-dimensonal angiogenesis assay. International Journal of Automotive and Mechanical Engineering, 9 (1). pp. 1662-1668. ISSN 2229-8649

Suleiman Ahmad, M. J. and Ahmad, M. A. and Ibrahim, R. and Mohamad, M. and Abu Kasim, N. B. and Abdul Kadir, M. R. and Muhamad, S. and Itoh, Y. and Hanada, K. and Shimizu, T. (2013) Effect of sintering conditions on mechanical properties and microstructure of titanium alloy produced by metal injection moulding (MIM). In: Advanced Materials Research.

Sultana, Naznin and Hassan,, Mohd Izzat and Hamdan,, Salehhuddin (2014) Bioactivity assessment of poly(epsilon-caprolactone)/hydroxyapatite electrospun fibers for bone tissue engineering application. Journal of Nanomaterials . ISSN 1687-4110

Supriyanto, Eko and Jaganathan,, Saravana Kumar and Murugesan,, Selvakumar and Balaji,, Arunpandian and Asokan,, Manjeesh Kumar Umar (2014) Biomaterials in cardiovascular research: applications and clinical implications. Biomed Research International . ISSN 2314-6133

T

Tahir B.A., (2012) Long-period grating as strain sensor. Journal of Ovonic Research, 8 (5). pp. 113-120. ISSN 1842-2403

Taib, I. and Osman, K. and Hermawan, H. and Abd. Kadir, M. R. (2013) Preliminary study on the comparable flow pattern between stented and non-stented aneurysm at hypertension condition. In: Applied Mechanics And Materials.

Tan, Tian Swee and Gan, Hong Seng and Abdul Kadir, Mohammed Rafiq and Abdul Karim, Ahmad Helmy and Sayuti, Khairil Amir and Wong, Liang Xuan and Tham, Weng Kit (2014) Medical image contrast enhancement using spline concept: data from the osteoarthritis initiative. Journal of Medical Imaging and Health Informatics, 4 (4). pp. 511-520. ISSN 2156-7018

Tan, Tian Swee and Gan, Hong Seng and Abdul Karim, Ahmad Helmy and Sayuti, Khairil Amir and Abdul Kadir, Mohammed Rafiq and Tham, Weng Kit and Wong, Liang Xuan and Chaudhary, Kashif Tufail and Ali, Jalil and Yupapin, Preecha P.P. (2014) Medical image visual appearance improvement using bihistogram bezier curve contrast enhancement: data from the osteoarthritis initiative. Scientific World Journal . ISSN 1537-744X

Tan, Tian Swee and Gan, Hongseng and Wong, Liangxuan and Tham, Wengkit and Sayuti, Khairil Amir and Abdul Karim, Ahmad Helmy and Abdul Kadir, Mohammed Rafiq (2014) Interactive knee cartilage extraction using efficient segmentation software: data from the osteoarthritis initiative. Bio-Medical Materials and Engineering, 24 (6). pp. 3145-3157. ISSN 0959-2989

Tan, Tian Swee and Mazenan, Mohd Nizam (2014) Malay wordlist modeling for articulation disorder patient by using computerized speech diagnosis system. Research Journal of Applied Sciences, Engineering and Technology, 7 (21). pp. 4535-4540. ISSN 2040-7459

Tan, Tian Swee and Yong, L. C. (2014) Statistical parametric speech synthesis of Malay language using found training data. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5143-5147. ISSN 2040-7459

Tan, Tian Swee and Yong, Lau Chee and Mazenan, Mohd Nizam (2014) Investigation of effects of different synthesis unit to the quality of Malay synthetic speech. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3803-3808. ISSN 2040-7467

Tan, Tian Swee and Yong, Lauchee (2014) Low footprint high intelligibility malay speech synthesizer based on statistical data. Journal of Computer Science, 10 (2). pp. 316-324. ISSN 1549-3636

Tan, Tian Swee and Mazenan, Mohd Nizam and Yong, Lauchee (2014) Computerized method for diagnosing and analyzing speech articulation disorder for Malay language speakers. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5278-5282. ISSN 2040-7459

Ting, Chee Ming and Samdin, Siti Balqis and Shaikh Salleh, Sheikh Hussain and Omar, Mohd. Hafizi and Ismail, Kamarulafizam (2012) An expectation-maximization algorithm based Kalman smoother approach for single-trial estimation of event-related potentials. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 6534-6538. ISSN 1557-170X

Ting, Chee-Ming and King, Simon and Salleh, Sh-Hussain and Ariff, A. K. (2013) Discriminative tandem features for hmm-based EEG classification. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC).

U

Ubaidullah, S. and Osman, K. (2013) Natural convection in a differentially heated cavity using splitting method. In: Applied Mechanics And Materials.

W

Wan Alwi, Sharifah Rafidah and Abdul Man, Zainuddin and Klemes, Jiri Jaromir (2011) Recent advances in resource conservation and planning - a review. Asia-Pacific Journal of Chemical Engineering, 6 (5). pp. 689-695. ISSN 1932-2143

Y

Yahya, Adibah and Lam,, Chiyong and Neoh,, Chin Hong (2014) Decolorization of palm oil mill effluent using growing cultures of Curvularia clavata. Environmental Science and Pollution Research, 21 (6). pp. 4397-4408. ISSN 0944-1344

Yahya, Adibah and Mienda,, Bashir Sajo (2014) An overview of microbial proteases for industrial applications. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (1). pp. 388-396. ISSN 0975-8585

Yahya, Azli and Andromeda, Trias and Khamis, Nor Hisham (2014) Gap response of linear and non-linear discharge model in Electrical Discharge Machining System. Applied Mechanics and Materials, 554 . pp. 648-652. ISSN 1660-9336

Yahya, Azli and Kartiko, Nugroho and Hashim, Nor Liyana Safura and Daud, Md Razak and Khamis, Nor Hisham and Khalil, Kamal and Abdul Rahim, Muhammad Arif and Baharom, Ameruddin (2014) Investigation of workpiece positioning methods for machining oil-pocket on hip-implant spherical surface. Advanced Materials Engineering and Technology II, 594-59 . pp. 535-539. ISSN 1013-9826

Yee, T. W. (2011) Properties and interaction of poly(vinyl alcohol)-sago pith waste biocomposite. Journal of Composite Materials, 45 (21). pp. 2199-2209. ISSN 0021-9983

Yee, T. W. and Choy, L. J. and Abdul Rahman, W. A. W. (2011) Mechanical and water absorption properties of poly(vinyl alcohol)/sago with waste biocomposites. Journal of Composite Materials, 45 (11). pp. 1201-1207. ISSN 0021-9983

Yunus, Jasmy and Satria, Muhammad Haikal and Supriyanto, Eko (2014) Emergency prenatal telemonitoring system in wireless mesh network. Telkomnika (Telecommunication Computing Electronics and Control), 12 (1). pp. 123-134. ISSN 1693-6930

Yunus, Jasmy and Thangavelu, Sasikala Devi and Ifeachor, Emmanuel C. and Edworthy, Judy D. and Chinna, Karuthan (2014) Challenges and recommendation of clinical alarm system in Intensive Care Units from user perspective. IEEE TENSYMP 2014 - 2014 IEEE Region 10 Symposium . pp. 366-369.

Yusop, A. H. and Hermawan, Hendra (2013) Synthesis and development of polymers-infiltrated porous iron for temporary medical implants: a preliminary result. In: Green Technologies For Sustainable & Innovation In Materials.

Z

Zulkepli, N. and Rajdi, N. N. Z. M. and Wicaksono, Dedy Hermawan Bagus (2014) The effect of processing parameters on the performance of cotton-fabric-based MEMS fabricated using stamped silver nanoparticles. In: 2014 IEEE Region 10 Symposium, 14-16 April, 2014, Kuala Lumpur, Malaysia.

Zainal Alam, Muhd. Nazrul Hisham and Pinelo, Manuel and Arnous, Anis and Jonsson, Gunnar and S. Meyer, Anne and Gernaey, Krist V. (2011) A miniature membrane reactor for evaluation of process design options on the enzymatic degradation of pectin. Industrial and Engineering Chemistry Research, 50 (19). pp. 11252-11258. ISSN 0888-5885

This list was generated on Wed Sep 20 03:43:59 2017 +08.