Items where Division is "Petroleum and Renewable Energy Engineering" and Year is 2011

A

Abang Mahmod, Dayang Salyani (2011) Preparation and characterization of polyacrylonitrile fiber precusor using multi-hole spinneret. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abd. Rahim, Nurul Hanan (2011) Fabrication and characterization of polyethersulfone multi-walled carbon nanotubes mixed matrix membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Akhondzadeh, Hamed (2011) Eor by expanding solvent steam assisted gravity drainage in athabasca oil reservoir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

B

Bakeri, G. and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. and Shariaty, M. (2011) Investigation on the effects of fabrication parameters on the structure and properties of surface-modified membranes using response surface methodology. Journal of Applied Polymer Science, 123 (5). pp. 2812-2827. ISSN 0021-8995

Bruun, E. W. and Hauggaard-Nielsen, H. and Ibrahim, Norazana and Egsgaard, H. and Ambus, P. and Jensen, P. A. and Dam-Johansen, K. (2011) Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil. Biomass and Bioenergy, 35 (3). pp. 1182-1189. ISSN 0961-9534

H

Hamid, N. A. A. and Ismail, Ahmad Fauzi and Matsuura, T. and Zularisam, A. W. and Lau, W. J. and Yuliwati, E. and Abdullah, M. S. (2011) Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO(2)) ultrafiltration membranes for humic acid removal. Desalination, 273 (1). 85–92. ISSN 0011-9164

Hashemifard, Seyed Abdollatif (2011) Development and modelling of mixed matrix membranes incorporating large pore size clay for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

I

Idroas, Mariani and Abd Rahim, Ruzairi and Rahiman, M. H. Fazalul and Green, R. and Ibrahim, Muhammad Nasir (2011) Modeling of a charge coupled device based optical tomographic instrumentation system for particle sizing. Powder Technology, 212 (1). pp. 25-37. ISSN 0032-5910

Idroas, Mariani and Abdul Rahim, R. and Fazalul Rahiman, M. H. and Ibrahim, M. N. (2011) Optical tomography system based on charge-coupled device linear image sensors: particle size measurement. Sensors and Actuators, B: Chemical, 156 (2). pp. 572-577. ISSN 0925-4005

Ismail, Ahmad Fauzi and Aziz, Madzlan and Basri, H. (2011) Polyethersulfone (PES)-silver composite UF membrane: Effect of silver loading and PVP molecular weight on membrane morphology and antibacterial activity. Desalination, 273 (1). pp. 72-80. ISSN 0011-9164

Ismail, Ahmad Fauzi and Aziz, Madzlan and Sanip, S. M. and Goh, P. S. and Ng, B. C. (2011) Recent advances of inorganic fillers in mixed matrix membrane for gas separation. Separation and Purification Technology, 81 (3). pp. 243-264. ISSN 1383-5866

Ismail, Ahmad Fauzi and Hashemifard, S. A. and Matsuura, T. (2011) Facilitated transport effect of Ag(+) ion exchanged halloysite nanotubes on the performance of polyetherimide mixed matrix membrane for gas separation. Journal Of Membrane Science, 379 (001-00). pp. 378-385. ISSN 0376-7388

Ismail, Ahmad Fauzi and Rahim, N. H. and Mustafa, Azeman and Matsuura, T. and Ng, B. C. and Abdullah, S. and Hashemifard, S. A. (2011) Gas separation performance of polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes. Separation and Purification Technology, 80 (1). pp. 20-31. ISSN 1383-5866

Ismail, Ahmad Fauzi and Salleh, W. N. W. and Matsuura , T. and Abdullah, M. S. (2011) Precursor selection and process conditions in the preparation of carbon membrane for gas separation: a review. Separation and purification reviews, 40 (4). pp. 261-311. ISSN 1542-2119

Ismail, Ahmad Fauzi and Yusof, Norhaniza (2011) Polyacrylonitrile/acrylamide-based carbon fibers prepared using a solvent-free coagulation process: Fiber properties and its structure evolution during stabilization and carbonization. Polymer Engineering and Science, 52 (2). pp. 360-366. ISSN 1224-5984

J

Jaafar, Juhana (2011) Development of sulfonated poly (ether ether ketone) triaminopyrimidine nanocomposite membrane for direct methanol fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Jaafar, Juhana and Ismail, Ahmad Fauzi and Matsuura, T. and Nagai, K. (2011) Performance of SPEEK based polymer-nanoclay inorganic membrane for DMFC. Journal of Membrane Science, 382 (40545). pp. 202-211. ISSN 0376-7388

Jackson, M. D. and Vinogradov, J. and Saunders, J. H. and Jaafar, Mohd. Zaidi (2011) Laboratory measurements and numerical modeling of streaming potential for downhole monitoring in intelligent wells. SPE Journal, 16 (3). pp. 625-636. ISSN 1086-055X

M

Mohd. Norddin, Muhammad Noorul Anam (2011) Synthesis and characterization of sulfonated poly (etheretherketone) with charge surface modifying macromolecules for direct methanol fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohtar, Safia Syazana (2011) Proton conducting composite membrane based on sulfonated poly (ether ether ketone) silicotungstic acid-montmorillonite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

O

Othman, Mohd. Hafiz Dzarfan and Droushiotis, N. and Wu, Z. and Kelsall, G. and Li, K. (2011) Novel fabrication technique of hollow fibre support for micro-tubular solid oxide fuel cells. Journal of Power Sources, 196 (11). 5035-5044. ISSN 0378-7753

P

Pourbasirat, Ali (2011) Measurement of streaming potential coupling coefficent of carbonate core for downhole monitoring in smart wells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

S

Sanip, S. M. and Ismail, Ahmad Fauzi and Goh, P. S. and Soga, T. and Tanemura, M. and Yasuhiko, H. (2011) Gas separation properties of functionalized carbon nanotubes mixed matrix membranes. Separation and Purification Technology, 78 (2). pp. 208-213. ISSN 1383-5866