Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2001

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 45.

Abdul Rahman, Roslan and Che Ismail, Che Abas and Abdullah, Mohd Yunus (2001) Mekanik Mesin : Teori, Contoh Penyelesaian dan Masalah Edisi Ketiga. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0225-7

Abdul Shukor, Syaimak (2001) Assessment of CAD to RP translation-unigraphics to quickslice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adi, Surjosatyo and Ani, Farid Nasir (2001) A numerical study of air flow in a coaxial pipe. Jurnal Teknologi A (34A). pp. 1-15. ISSN 0127-9696

Ahmad, Robiah and Jamaluddin, Hishamuddin (2001) Orthogonal least square algorithm and its application for modelling suspension system. Jurnal Teknologi A (34A). pp. 71-84. ISSN 0127-9696

Ahmad, Shaharudin (2001) Strength of longitudinally framed vessels and their components using analytical approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Mohd. Jaafar, Mohammad Nazri and Sopian, Kamaruzzaman and Hassan, Masjuki and Mustafa, Azeman and Ismail, Ahmad Faris and Md. Lazim, Tholuddin and Abdul Rahim, Ahmad Suhaimi and Zainal Alauddin, Zainal Alimuddin (2001) Glosari teknologi pembakaran. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0224-9

Che Mat Isa, Mohamd Azman and Mohd. Rohani, Jafri (2001) Peningkatan Kualiti Produk (Billet) Melalui Teknik Asas Kawalan Kualiti. Jurnal Teknologi A (34A). pp. 29-43. ISSN 0127-9696

Cheng, See Yuan (2001) Heatsealability of multilayer flexible-packaging materials in bar sealing application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chua, Soon Chiang (2001) Kajian awal tindakbalas dinamik angin ke atas bangunan tinggi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

D. Prayitno, D. Prayitno and Esah, Hamzah and Mohd. Ghazali, Mohd. Zulkifli and Clegg, A. J. (2001) Theoretical Approach On The Growth Rate Of Solidified Metal Interface. Jurnal Teknologi A (35A). pp. 47-56. ISSN 0127-9696

Dahalan, Md. Nizam and Lee, Boon Peng (2001) Software development for aerodynamic characteristics estimation of wing-body combination of aircraft at cubsonic speeds. Jurnal Mekanikal (12). pp. 23-33. ISSN 0127-3396

Ding, Chin Kwong (2001) Processing And Mechanical Characterization Of H2sm-5 Zeolite Loaded With Transition Metals Catalysis For Single Step Conversion Of Mehthane To Gascoline. Masters thesis, UTM Skudai, Mekanikal.

Er, Chin Hai (2001) Quality function deployment (QFD) and design for assembly (DFA) using teamset. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Esah and Prayitno, Dody and Mohd. Ghazali, Mohd. Zulkifli (2001) Effect of mould tilt angles on the mechanical properties of as-cast al-si alloy. In: International Conference and Exhibition on Advances in Production and Processing of Aluminium, 2001, Bahrain.

Hashim, Jasmi (2001) The Production Of Cast Metal Matrix Composite By A Modified Stir Casting Method. Jurnal Teknologi A (35A). pp. 9-20. ISSN 0127-9696

Hassan, Azmi and Saleh, Chairul and Baba, Md. Deros and Muniyandi, Saravanan (2001) Penggunaan Kaedah Ukur Rujuk Dalam Pemprosesan Seramik Bagi Meningkatkan Kualiti Dan Produktiviti. Jurnal Teknologi A (35A). pp. 57-70. ISSN 0127-9696

Huong, Yu Saint (2001) Wing-external store aerodynamic interferences of a subsonic aircraft. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Mohd. Hasbullah (2001) Processing and evaluation of an investment cast magnesium-base alloys. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafri, Mohd. Rohani and Chan, Kok Teng (2001) Improving Quality With Basic Statistical Process Control (SPC) Tools: A Case Study. Jurnal Teknologi A (35A). pp. 21-34. ISSN 0127-9696

Jawaid, A. and Koksal, S. and Sharif, Safian (2001) Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy. Journal of materials processing technology, 116 (1). pp. 2-9.

KEVIN NEWHOUSE, KEVIN NEWHOUSE (2001) A PERFORMANCE-BASED BUILDING CODE IN USE. Jurnal Teknologi B, 35 (B). pp. 1-12. ISSN 0127-9696

M. Yusof, Sha'ri and Aspinwall, Elaine (2001) Case Studies on The Implementation of TQM in The UK Automotive SMEs. International Journal of Quality & Reliability Management, 18 (7). pp. 722-744. ISSN 0265-671X

Mailah, Musa and Ong, Miaw Yong (2001) Intelligent adaptive active force control of a robotic arm with embedded iterative learning algorithms. Jurnal Teknologi A (35A). pp. 85-98. ISSN 0127-9696

Mamat, Rizalman and Mohd. Ja'afar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2001) Pengaruh kaedah penyediaan fabrikasi/propelan ke atas kadar pembakaran. In: Proceding of National Seminar on Advance Material Development in Malayia, 2001.

Mat Alit, Mohamad Isnizam and Mohd. Jaafar, Mohammad Nazri (2001) Pembangunan Pembakar Bahan Api Cecair Beremisi Rendah Di UTM. Jurnal Teknologi A (35A). pp. 71-84. ISSN 0127-9696

Md. Yasin, Anuar Syamsi (2001) Damage evolution of ball bearings under fatigue loading conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri (2001) Penyelesaian Masalah Dalam Dinamik Gas. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0221-4

Mohd. Rohani, Jafri and Tamat, Suhaimi (2001) Peningkatan Kualiti Reka Bentuk Kerusi Sekolah Rendah Dengan Mengintegrasikan Kaedah Qfd Dan Kejuruteraan Nilai. Jurnal Teknologi A (35A). pp. 35-46. ISSN 0127-9696

Muhamad, Fairuz (2001) Ultrasonic machining (USM) of alumina using classical design of experiment (DOE) approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad Zameri, M. S. and Wai, P. C. (2001) Application of total productive maintenance (TPM) concept in palm oil mill factory. Jurnal Mekanikal (12). ISSN 0127-3396

Muhammad Shuhaimi, Shamsuddin and Jafri, Mohd. Rohani (2001) Kajian Kemungkinan Aplikasi Konsep Mesin Fmea (Failure Mode And Effect Analysis): Kajian Kes Di Seksyen Mills Di Kilang Keluli. Jurnal Teknologi A (34A). pp. 17-28. ISSN 0127–9696

Murrad, Muhamad (2001) External ballistic of artillery projectile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustapa, Mohammad Sukri (2001) Kesan Parameter Bebanan Ke Atas Kadar Perambatan Retak-Lesu Di Dalam Kelakuan Keluli Tahan Karat 316. Masters thesis, UTM Skudai, Mekanikal.

Ourdjini, A. and Chew, K. C. and Khoo, B. T. (2001) Settling of silicon carbide particles in cast metal matrix composites. Journal of Materials Processing Technology, 116 . pp. 72-76. ISSN 0924-0136

Rajoo, Srithar (2001) Simulation an experimental study of coolant temperature effect on gasoline engine performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Yahaya (Translator) (2001) Termodinamik kejuruteraan asas edisi keempat. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0211-7

Senawi, M. Y. (2001) Development of a building energy analysis package (BEAP) and its application to the analysis of cool thermal energy storage systems. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Tan, Jaan Soon (2001) Preparation of microporous carbon adsorbents from oil palm shell by physical and chemical treatments for gas separations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teshnizi, Shokrollah Sharifi (2001) Mechanical behaviour of GFRP cylinder subjected to radial patch loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mohamed, Wan Ahmad Najmi (2001) Development and performance of a cascading hearth with secondary swirl combustor for solid waste (palm oil shells). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Hong Mun (2001) Characteristic improvement of a carburettor for a petrol internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Woon, Siew Fang (2001) Variational approach to the solution of the torsion problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yaacob, Mohd. Shafiek and Jamaluddin, Hishamuddin (2001) Effects of user selected conditions on modeling of dynamic systems using adaptive fuzzy model. Jurnal Teknologi A (34A). pp. 45-60. ISSN 0127-9696

Yahya, Nizamil Fairuz (2001) Optimisation of plating parameters and performance analysis of black chromium coating for solar thermal energy applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yiow, Chong Iyat (2001) Vibro-Acoustic Analysis Of Car Body Structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

This list was generated on Sat Dec 20 04:30:21 2014 MYT.