Items where Year is 2023

A

Abubakar, Muazu and Ahmad, Norhayati (2023) Preparation and characterization of a clay-based ceramic membrane for tannery wastewater treatment. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 1-14. ISSN 2462-1943

Abd. Halim, Zulhelmi Alif and Mat Yajid, M. A. and Mat Yajid, xAhmed. G. and Saud, S. N. and Abu Bakar, T. A. (2023) The effect of CNTs/PEEK coating thickness on the friction and wear behavior of porous Ti-30Ta alloys for biomaterial implants. Journal of Applied Polymer Science, 140 (41). NA-NA. ISSN 0021-8995

A. Maimun, A. Maimun and Amirudin, A. A. A. and Kamarumtham, K. I. and Ahmed, Y. A. and Rahimuddin, Rahimuddin (2023) Numerical analysis of the maneuverability of a large ship in restricted waters. In: 5th International Conference on Maritime Education and Training, ICMET 2021, 5 October 2021-6 October 2021, Virtual, Makassar, Indonesia.

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Samin,, Pakharuddin and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Shaharuddin, Nik Mohd Ridzuan and Mazali, Izhari Izmi and Ardani, Mohd. Ibthisham and Mohd. Yamin, Ahmad Hafizal (2023) Experimental evaluation of ride comfort performance for suspension system using PID and fuzzy logic controllers by advanced firefly algorithm. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (3). NA-NA. ISSN 1678-5878

Ab. Talib, Mat Hussin and Mohd. Rosli, Nur Hafiezul and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Ardani, Mohd. Ibthisham and Mohd. Saufi, Mohd. Syahril Ramadhan and Mohd. Yamin, Ahmad Hafizal (2023) Fuzzy logic controller by particle swarm optimization discoverer for semi-active suspension system. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022, Pekan, Pahang, Malaysia.

Abd. Halim, Zulhelmi Alif and Ahmad, Norhayati (2023) Characterisation of thin α-Al2O3 tribo-coating deposited by low-power gas tunnel plasma spray. Materials Science and Technology, 39 (18). pp. 3345-3350. ISSN 0267-0836

Abd. Halim, Zulhelmi Alif and Mat Yajid, Muhammad Azizi and Ahmad, Norhayati (2023) Thermogravimetric behavior of mesoporous hydrated silica-alumina trihydrate hybrid powder synthesized by sol-gel/doping method. Materials Letters, 347 (NA). NA. ISSN 0167-577X

Abd. Latif, Amir and Ishak, Mohammad Ridzwan and Yidris, Noorfaizal and Mohamed Yusoff, Mohd. Zuhri and Muhammad Rizal, Muhammad Asyraf and Syed Zakaria, Sharifah Zarina (2023) Influence of woven glass-fibre prepreg orientation on the flexural properties of a sustainable composite honeycomb sandwich panel for structural applications. Materials, 16 (14). pp. 1-17. ISSN 1996-1944

Abd. Rahim, Muhamad Sharifuddin and Yakub, Fitri and Omar, Mas and Abd. Ghani, Rasli and Shaikh Salim, Sheikh Ahmad Zaki and Masuda, Shiro and Dhamanti, Inge (2023) Prediction of indoor air quality using long short-term memory with adaptive gated recurrent unit. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 - 23 May 2023, Tokyo, Japan.

Abdelmaksoud, Sherif I. and Mailah, Musa and Hing, Tang Howe (2023) System enhancement on perturbations and wind gusts for twin-rotor helicopter using intelligent active force control. International Journal of Modelling, Identification and Control, 43 (2). pp. 166-176. ISSN 1746-6172

Abdul Halim, Nurul Aida Nabila and Abdul Latiff, Zulkarnain and Mohd. Perang, Mohd. Rozi (2023) Domestic ejector air-conditioning system performance using different ejector and refrigerant type. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Abdul Hamid, Mohd. Kameil and Singh, Rajwinder and Md. Zain, Mohd. Zarhamdy and Che Daud, Zul Hilmi and Mazali, Izhari Izmi and Abu Bakar, Abd Rahim (2023) Experimental study on the improvement of thermal comfort inside a car cabin. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Abdul Hanan, Umar and Abu Hassan, Shukur and Wahit, Mat Uzir and Binoj, Joseph Selvi and Mansingh, Bright Brailson and Goh, Kheng Lim (2023) Experimentation, optimization, and predictive analysis of compressive behavior of montmorillonite nano-clay/unsaturated polyester composites. Polymer Composites, 44 (1). pp. 241-251. ISSN 0272-8397

Abdul Manaf, M. Z. and K., Hudha and Samin, P. M. and Bakar, S .A. A. (2023) Modelling and verification of a 12-DOF tractor-semitrailer longitudinal model for load transfer analysis. International Journal of Heavy Vehicle Systems, 30 (5). pp. 525-559. ISSN 1744-232X

Abdullah, Mohamad Taisir (2023) Light-emitting diode lighting parametric study of internally illuminated photobioreactor for good growth of nannochloropsis species cultivation. PhD thesis, Universiti Teknologi Malaysia.

Abdulmunem, Abdulmunem R. and Hamed, Hussein M. and Mohd. Samin, Pakharuddin and Mazali, Izhari Izmi and Sopian, Kamaruzzaman (2023) Thermal management of lithium-ion batteries using palm fatty acid distillate as a sustainable bio-phase change material. Journal of Energy Storage, 73 (109187). NA-NA. ISSN 2352-152X

Abdulmunem Alsamaraie, Abdulmunem R. and Mohd. Samin, Pakharuddin and Mazali, Izhari Izmi and Jadallah, Abdullateef A. and Sultan, Khalid F. (2023) Insulation materials based on recycled feather waste: a review. Tikrit Journal of Engineering Sciences, 30 (1). pp. 104-111. ISSN 1813-162X

Abdulrahman, Mohammed Bashir and Abdul Wahid, Mazlan and Asmayou, Ali Houssein and Ismail, Najib Aminu and Rahman, Md. Mizanur and Mohd. Yasin, Mohd. Fairus (2023) A review of liquid fuel flameless combustion with various flow configurations. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Abu Bakar, Mohd. Supian and Syamsir, Agusril and Alhayek, Abdulrahman and Muhammad Rizal, Muhammad Asyraf and Itam, Zarina and Shaik Ahmad Fadzil, Shaikh Muhd. Mubin and Abd. Aziz, Nurhanani and Jamal, Tarique and Mohd. Mansor, Siti Aminah (2023) The reduction factor of pultrude glass fibre-reinforced polyester composite cross-arm: a comparative study on mathematical modelling for life-span prediction. Materials, 16 (15). ISSN 1996-1944

Abu Bakar, Noor Zafirah and Padzillah, Muhamad Hasbullah (2023) Influence of blade-flow interactions on flow behaviours and blade loading of an automotive mixed-flow turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (1). pp. 131-153. ISSN 2289-7879

Abu Bakar, Saiful Anuar and Azmi, Faiz Ikmal (2023) Mechanical modification of remote-controlled (RC) go-kart. Journal of Transport System Engineering, 9 (1). pp. 28-36. ISSN 2289–9790

Abu Baker, Esam Abu Baker Ali and Ishak, Iskandar Shah and Mat Lazim, Tholudin and Mohamed Takeyeldein, Mohamed and Abu Haider, Abul Bashar Mohammad (2023) Aerodynamic performance investigation of a small horizontal axis wind turbine with multi-airfoil blade profiles of SD2030 and E231 using wind tunnel experiments and BEM theory method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (1). pp. 150-164. ISSN 2289-7879

Abu Hasan, Muhammad Danial and Saufi, Syahril Ramadhan and Isham, M. Firdaus and Mad Saad, Shaharil and A. Saad, W. Aliff and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee and Md. Idris, M. Haffizzi (2023) Cluster analysis based on image feature extraction for automated OMA. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022, Pekan, Pahang, Malaysia.

Adnan, Ahmad Naufal and Ma’aram, Azanizawati and Md. Sirat, Rozlina and Mohd. Taib, Mohd. Firdaus and Ismail, Azianti and Libasin, Zalina (2023) Preliminary framework of lean healthcare sustainability performance measurement for health sector. Malaysian Journal of Medicine and Health Sciences, 19 (5). pp. 145-151. ISSN 1675-8544

Agustiarini, Nurlaily and Hoang, Hieu Ngoc and Oh, Jong Taek and Mohd. Ghazali, Normah (2023) Application of machine learning to the prediction of the boiling heat transfer coefficient of R32 inside a multiport mini-channel tube. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3137-3153. ISSN 1388-6150

Ahamed, Menaz and Pesyridis, Apostolos and Saray, Jabraeil Ahbabi and Andwari, Amin Mahmoudzadeh and Gharehghani, Ayat and Rajoo, Srithar (2023) Comparative assessment of sCO2 cycles, optimal ORC, and thermoelectric generators for exhaust waste heat recovery applications from heavy-duty diesel engines. Energies, 16 (11). pp. 1-21. ISSN 1996-1073

Ahmad, Shamraiz and Wong, Kuan Yew and Butt, Shahid Ikramullah (2023) Status of sustainable manufacturing practices: literature review and trends of triple bottom-line-based sustainability assessment methodologies. Environmental Science and Pollution Research, 30 (15). pp. 43068-43095. ISSN 0944-1344

Ahmed Shakil, Usaid and Abu Hassan, Shukur and Yahya, Mohd. Yazid (2023) Electrospun short nanofibers to improve damage resistance of carbon fiber composites. Polymer Composites, 44 (4). pp. 2305-2321. ISSN 0272-8397

Ahmed Sule, Ahmed Sule and Abdul Latiff, Zulkarnain and Abbas, Mohammed Azman (2023) Prospects and challenges of nanofluids as improved fuel for diesel and gasoline engines: A critical review. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Akbar Teguh Prakoso, Akbar Teguh Prakoso and Basri, Hasan and Dendy Adanta, Dendy Adanta and Irsyadi Yani, Irsyadi Yani and Ammarullah, Muhammad Imam and Akbar, Imam and Ghazali, Farah Amira and Syahrom, Ardiyansyah and Tunku Kamarul, Tunku Kamarul (2023) The effect of tortuosity on permeability of porous scaffold. Biomedicines, 11 (2). pp. 1-17. ISSN 2227-9059

Akmal, A. Z. A. and Rani, Muhammad Faiz Hilmi and Wong, Keng Yinn and Ardani, Mohd. Ibthisham and Mohamad Razlan, Zuradzman and Abu Bakar, Shahriman and Kamarudin, Kamarulzaman and A. Kadir, M. S. and Murali, Rishan and Sunan, Sukport (2023) Numerical investigation of immersion cooling performance for lithium-ion polymer (LiPo) battery: effects of dielectric fluids and flow velocity. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 - 5 September 2023, Kuala Lumpur, Malaysia.

Al Amin, M. M. R. and Asrofi, M. and Pradiza, R. R. and Setyawan, H. and Kristianta, F. X. and Junus, S. and Sakura, R. R. and Dwilaksana, D. and Ilminnafik, N. and Listiyadi, D. and Mahardika, M. and Amanda, P. and Ilyas, R. A. (2023) Edible film biocomposite based on cassava starch/soy lecithin reinforced by sugarcane bagasse fiber: mechanical, morphological and moisture properties. In: 2nd International Conference on Agriculture, Food, and Environment, ICAFE 2023, 20 July 2023, Yogyakarta, Indonesia.

Al Fawzi, Mochammad Doddy and Pratami, Devi and Wibowo, Sigit A. and Akhmal, Nor Hasrul (2023) Identification of waste in program management at the IT department of a Higher Education Institution (HEI) through lean six sigma (DMAIC). In: 8th International Conference on Informatics and Computing (ICIC), 8 December 2023-9 December 2023, Manado, Indonesia.

Al-Allaj, Ali Jaber Naeemah and Wong, Kuan Yew (2023) Sustainability metrics and a hybrid decision-making model for selecting lean manufacturing tools. Resources, Environment and Sustainability, 13 (NA). pp. 1-24. ISSN 2666-9161

Al-Quraishi, Mohammed Baqer Zaki Yahya and Sarip, Shamsul and Mad Kaidi, Hazilah and Izzat, Mohamad Fairul (2023) An investigation of hydraulic transmission system for small-scale floating vertical turbine. In: 11th International Conference on Applied Science and Technology 2022, ICAST 2022, 13 June 2022 - 14 June 2022, Hybrid, Putrajaya.

Alamin, Etaib and Kamaruzaman, Natrah and Mohamed Kamar, Haslinda (2023) Building envelopes toward energy-savings in hot and humid climates: a review. Strategic Planning for Energy and the Environment, 42 (3). pp. 431-476. ISSN 1048-5236

Alamin, Etaib and Kamaruzaman, Natrah and Mohamed Kamar, Haslinda (2023) A pragmatic retrofitting approach to enhancing the thermal, energy and economic performance of an educational building: a case study in Malaysia. Clean Energy, 7 (6). pp. 1282-1299. ISSN 2515-4230

Alavi, Seyed Karen and Ayatollahi, Majid R. and Yahya, Mohd. Yazid and Koloor, Seyed Saeid Rahimian (2023) On the asymmetric dynamic response of viscoelastic sector plate made of FG polymer foam. Thin-Walled Structures, 187 (NA). NA. ISSN 0263-8231

Alawi, Omer A. and Mohamed Kamar, Haslinda and Falah, Mayadah W. and Hussein, Omar A. and Abdelrazek, Ali H. and Ahmed, Waqar and Mahmoud Eltaweel, Mahmoud Eltaweel and Homod, Raad Z. and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2023) Thermohydraulic performance of thermal system integrated with twisted turbulator inserts using ternary hybrid nanofluids. Nanotechnology Reviews, 12 (1). pp. 1-21. ISSN 2191-9089

Alfellag, Mohanad A. and Mohamed Kamar, Haslinda and Che Sidik, Nor Azwadi and Muhsan, Ali Samer and Kazi, Salim Newaz and Alawi, Omer A. and Abidin, Ummikalsom (2023) Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 6645-6686. ISSN 1388-6150

Alhayek, Abdulrahman and Syamsir, Agusril and Supian, A. B. M. and Usman, Fathoni and Najeeb, M. I. and Asyraf, M. R. M. (2023) A mathematical model of flexural-creep behaviour for future service expectancy of a GFRP composite cross-arm with the influence of outdoor temperature. Fibers and Polymers, 24 (7). pp. 2425-2437. ISSN 1229-9197

Alhayek, Abdulrahman and Syamsir, Agusril and Supian, A. B. M. and Usman, Fathoni and Najeeb, M. I. and Asyraf, M. R. M. (2023) A mathematical model of flexural-creep behaviour for future service expectancy of a GFRP composite cross-arm with the influence of outdoor temperature. Fibers and Polymers, 24 (7). pp. 2425-2437. ISSN 1229-9197

Ali, Audu Ibrahim and Abdul Hamid, Mohd. Kameil and Abas, Mohd. Azman and Muhamad Said, Mohd. Farid and Opia, Anthony Chukwunonso and Mazali, Izhari Izmi and Che Daud, Zul Hilmi (2023) Tribological performance evaluation of vegetable lubricant incorporated Ethylene Vinyl Acetate (EVA) and Tertiary-Butyl-Hydroquinone (TBHQ) nanoparticles. Tribology Online, 18 (4). pp. 103-114. ISSN 1881-218X

Ali, Syed Mithun and Fathollahi-Fard, Amir M. and Ahnaf, Rashik and Wong, Kuan Yew (2023) A multi-objective closed-loop supply chain under uncertainty: An efficient Lagrangian relaxation reformulation using a neighborhood-based algorithm. Journal of Cleaner Production, 423 (138702). NA-NA. ISSN 0959-6526

Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2023) Comparison of thermal comfort condition of naturally ventilated courtyard, semi-outdoor and indoor air-conditioned spaces in tropical climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 45-58. ISSN 2289-7879

Allah, Mohammad Zaraa and Mohamed Kamar, Haslinda and Hariri, Azian and Wong, Keng Yinn (2023) Investigating adaptive thermal comfort in office settings: A case study in Johor Bahru, Malaysia. Case Studies in Chemical and Environmental Engineering, 8 (NA). pp. 1-12. ISSN 2666-0164

Alsebai, Fouzi and Kang, Hooi-Siang and Yaakob, Omar and Muhammad Yazid, Muhammad Noor Afiq Witri (2023) Review of resources from the perspective of wave, tidal, and ocean thermal energy conversion. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (3). pp. 127-149. ISSN 2462-1943

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Mohd. Saufi, Mohd. Syahril Ramadhan and Ma'aram, Azanizawati and Masood, Ibrahim (2023) An improved features selection approach for control chart patterns recognition. Indonesian Journal of Electrical Engineering and Computer Science, 31 (2). pp. 734-746. ISSN 2502-4752

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Saufi, Syahril Ramadhan and Mahmood, Salwa (2023) Ensemble classifier for recognition of small variation in X-Bar control chart patterns. Machines, 11 (1). pp. 1-32. ISSN 2075-1702

Ammarullah, Muhammad Imam and Afif, Ilham Yustar and Maula, Mohamad Izzur and Mohammad Tauviqirrahman, Mohammad Tauviqirrahman and Athanasius Priharyoto Bayuseno, Athanasius Priharyoto Bayuseno and Jamari, Jamari and Tri Indah Winarni, Tri Indah Winarni and Basri, Hasan and Syahrom, Ardiyansyah and Md. Saad, Amir Putra (2023) Von Mises stress analysis of CoCrMo-on-CoCrMo hip prosthesis based on body mass index: 2D FEM estimation. In: 2nd International Conference on Advanced Information Scientific Development: Innovating Scientific Learning for Deep Communication, ICAISD 2021, 5 August 2021-6 August 2021, Jakarta, Indonesia.

Ammarullah, Muhammad Imam and Afif, Ilham Yustar and Maula, Mohamad Izzur and Tri Indah Winarni, Tri Indah Winarni and Mohammad Tauviqirrahman, Mohammad Tauviqirrahman and Athanasius Priharyoto Bayuseno, Athanasius Priharyoto Bayuseno and Basri, Hasan and Syahrom, Ardiyansyah and Md. Saad, Amir Putra and Jamari, J. (2023) 2D finite element deformation investigation on CoCrMo-on-CoCrMo bearing of total hip implant under normal walking condition. In: 3rd Engineering Physics International Conference, EPIC 2021, 24 August 2021-25 August 2021, Virtual, Yogyakarta, Indonesia.

Ammarullah, Muhammad Imam and Afif, Ilham Yustar and Maula, Mohamad Izzur and Winarni, Tri Indah and Tauviqirrahman, Mohammad and Bayuseno, Athanasius Priharyoto and Basri, Hasan and Syahrom, Ardiyansyah and Md. Saad,, Amir Putra and Jamari, J. (2023) Von Mises stress evaluation of CoCrMo-on-CoCrMo bearing in total hip replacement during normal walking using 2D finite element strategy. In: Sriwijaya International Conference on Engineering and Technology 2021, SICETO 2021, 25 October 2021 - 26 October 2021, Hybrid, Palembang, Indonesia.

An, Tong Tong and Redzuan, Norizah and Jiang, Xiao Xia and Yuan, Yong Guang (2023) The strength behavior of O-core sandwich pipe. In: International Conference on Applied Mechanics, Materials Physics, and Engineering Structures, MMPES 2023, 5 January 2023 - 6 January 2023, Wuhan, China.

Aramwit, Pornanong and Chin, Desmond Daniel Vui Sheng and Moorthy, Goutam Krishna and Guna, Vijaykumar and Reddy, Narendra (2023) Rice husk and coir fibers as sustainable and green reinforcements for high performance gypsum composites. Construction and Building Materials, 393 (NA). NA-NA. ISSN 0950-0618

Arshad, Azrina and Mat Yajid, Muhamad Azizi and Daroonparvar, Mohammadreza and Idris, Mohd. Hasbullah and Mohd. Zulkifli, Intan Syaqirah and Hassan, Ahmed G. and Abdul Halim, Zulhelmi Alif (2023) Effect of laser-glazed treatment on thermal cyclic behavior of plasma-sprayed Lanthanum Zirconate/Yttria-stabilized Zirconia double ceramic layered on NiCoCrAlYTa-coated Inconel. Journal of Thermal Spray Technology, 32 (8). pp. 2603-2619. ISSN 1059-9630

Arudi, Ishiaka Shaibu and Hamzah, Esah and Mat Yajid, Muhammad Azizi and Bushroa, A. R. and Munshi, Shadi M. and Al-Ashhab, M. S. and Ibrahim, Mahmoud Z. (2023) Taguchi optimization of hardness and scratch adhesion strength of multilayer Ti/TiN coatings on Ti-51 at%Ni alloy deposited via magnetron sputtering technique. Journal of Materials Research and Technology, 27 (NA). pp. 7664-7672. ISSN 2238-7854

Ashraf, Noman and Abdul Wahid, Mazlan (2023) Natural convection over a vertical flat plate: A numerical and experimental investigation. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Asmayou, Ali Houssein and Abdul Wahid, Mazlan and Abdulrahman, Mohammed Bashir (2023) Thermal characteristics of biogas flameless combustion in asymmetric meso-scale combustor. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Asmayou, Ali Houssein and Abdul Wahid, Mazlan and Abdulrahman, Mohammed Bashir and Mohd. Sies, Mohsin (2023) Influence of equivalence ratio on emissions in meso-scale vortex combustor. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Asyraf, M. R. M. and Hazrati, K. Z. and Chin, Desmond Daniel Vui Sheng and M. Rafidah, M. Rafidah and W. Ashraf, W. Ashraf and Madenci, Emrah and Özkılıç, Yasin Onuralp and Aksoylu, Ceyhun and Nurazzi, N. M. (2023) Lignocellulosic sugar palm fibre-reinforced thermoplastic composites: Mechanical, thermal and dynamic mechanical properties. Fibers and Polymers, 24 (8). pp. 2625-2639. ISSN 1229-9197

Asyraf, M. R. M. and Nurazzi, N. M. and Norrrahim, M. N. F. and Hazrati, K. Z. and Ghani, Aizat and Sabaruddin, F. A. and Lee, S. H. and Shazleen, S. S. and Razman, M. R. (2023) Thermal properties of oil palm lignocellulosic fibre reinforced polymer composites: A comprehensive review on thermogravimetry analysis. Cellulose, 30 (5). pp. 2753-2790. ISSN 0969-0239

Asyraf, M. R. M. and Yahya, M. Y. and Hassan, S. A. and Ilyas, R. A. and D. D. C., V. Sheng and Mas'ood, N. N. and Saad, W. A. A. and M. Yusop, A. H. and Hainin, M. R. and M., Rafidah (2023) Hybrid synthetic and natural fibres in honeycomb sandwich composite structures for structural applications: A brief review. Journal of Natural Fibre Polymer Composites (JNFPC), 2 (1). pp. 1-16. ISSN 2821-3289

Audu, Ibrahim Ali and Abdul Hamid, Mohd. Kameil and Abas, Mohd. Azman and Opia, Anthony Chukwunonso (2023) Tribological behavior investigation of Ficus Carica oil blended ethylene-vinyl acetate polymer on AISI 52100 steel using four-ball tribometer. Jurnal Tribologi, 38 (NA). pp. 29-39. ISSN 2289-7232

Azeman, Muhammad Hafizuddin and A. Wahid, Mazlan and Ghazali, Ahmad Dairobi and Wahid, Muhammad Amri (2023) Early assessment of thermal analysis rotating detonation engine. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Azman, Nurul Farhanah and Samion, Syahrullail and Mohamad Nor Musa, Mohamad Nor Musa (2023) The role of oleic acid on the structural changes of graphite nanoplatelets in enhancing the tribological performance of a palm oil-based lubricant. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1353-1371. ISSN 1350-6501

Azman, Zulkifli and Nayan, Nafarizal and Othman, Nur Afiqah and Abu Bakar, Ahmad Shuhaimi and Mamat, Mohamad Hafiz and Mohd. Yusop, Mohd. Zamri and Ahmad, Muhammad Yazid (2023) Optical band gap and surface morphology of AlN thin-film sputtered by HiPIMS on glass substrate. In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021-7 September 2021, Virtual, Online, Johor Bahru, Johor, Malaysia.

Azmi, A. and Padzillah, Mohammad Hasbullah (2023) Secondary flow structure characteristics of an automotive mixed flow turbocharger turbine volute at different aspect ratios. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3089-3115. ISSN 1388-6150

Azwar, Elfina and Wan Mahari, Wan Adibah and Liew, Rock Keey and Ramlee, Muhammad Zulhilmi and Verma, Meenakshi and Chong, William Woei Fong and Peng, Wanxi and Ng, Hui Suan and Mu. Naushad, Mu. Naushad and Sonne, Christian and Lam, Su Shiung (2023) Remediation and recovery of Kariba weed as emerging contaminant in freshwater and shellfish aquaculture system via solvothermal liquefaction. Science of the Total Environment, 876 (NA). NA. ISSN 0048-9697

B

Balogun, S. A. and Abdul Jalil, M. K. and Mohd. Taib, J. (2023) An approach to logical compatibility determination for solution principles in morphological matrix-based conceptual design. International Journal Of Automotive And Mechanical Engineering, 20 (1). pp. 10211-10230. ISSN 2229-8649

Basri, Hasan and Akbar Teguh Prakoso, Akbar Teguh Prakoso and Abidin, Zainal and Syahrom, Ardiansyah and Akbar, Imam and Dendy Adanta, Dendy Adanta (2023) The effect of tortuosity on wall shear stress of porous scaffold. CFD Letters, 15 (7). pp. 61-73. ISSN 2180-1363

Busu, Nur’Amirah and Mat Isa, Norasikin and Hariri, Azian and Hussein, Mohamed (2023) The comparison of P, PI and PID strategy performance as temperature controller in active iris damper for centralized air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 143-154. ISSN 2289-7879

C

Cendra Devayana Putra, Cendra Devayana Putra and Achmad Ilham Fanany Al Isyrofie, Achmad Ilham Fanany Al Isyrofie and Suryani Dyah Astuti, Suryani Dyah Astuti and Berliana Devianti Putri, Berliana Devianti Putri and Dyah Rohmatul Ummah, Dyah Rohmatul Ummah and Miratul Khasanah, Miratul Khasanah and Perwira Annissa Dyah Permatasari, Perwira Annissa Dyah Permatasari and Syahrom, Ardiyansyah (2023) Variational autoencoder analysis gas sensor array on the preservation process of contaminated mussel shells (Mytilus Edulis). Sensing and Bio-Sensing Research, 40 (NA). pp. 1-10. ISSN 2214-1804

Chan, W. L. and Chiong, M. S. (2023) A performance study of R717 and R22 as the working fluid for OTEC plant. In: 2nd International Conference on Environmental Sustainability and Resource Security, IC-ENSURES 2022, 8 March 2022 - 9 March 2022, Johor Bahru, Johor, Malaysia - Virtual, Online.

Chen, Qian and Morita, Takehiro and Sawae, Yoshinori and Fukuda, Kanao and Sugimura, Joichi (2023) Effects of trace moisture content on tribofilm formation, friction and wear of CF-filled PTFE in hydrogen. Tribology International, 188 (NA). NA. ISSN 0301-679X

Chen, Yon Kong and Bakhary, Norhisham and Padil, Khairul Hazman and Shamsudin, Mohd. Fairuz (2023) Unsupervised deep neural network considering the uncertainties effect in pipeline condition monitoring using guided ultrasonic waves. In: The 5th International Conference on Maintenance, Condition Monitoring and Diagnostics, MCMD 2021, 16 February 2021 - 17 February 2021, Oulu, Finland.

Chiong, Meng Choung and Mong, Guo Ren and Wong, Keng Yinn and Tan, Hui Yi and Samiran, Nor Afzanizam (2023) Dual fuel soy biodiesel and natural gas swirl combustion for toxic emissions reduction. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Chong, Jia Yuik and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2023) Critical enablers and inhibitors for economic sustainability in the supply and demand of end-of-life vehicles in Malaysia: A SWOT analysis. Journal of Material Cycles and Waste Management, 25 (5). pp. 3048-3064. ISSN 1438-4957

Chong, Jia Yuik and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2023) End-of-life vehicles research development in Malaysia: A comprehensive review with the integrated conceptual model of innovative sustainable manufacturing elements. Journal of Material Cycles and Waste Management, 25 (2). pp. 698-716. ISSN 1438-4957

Chong, Jia Yuik and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal and Hamzah, Halim Shah (2023) Supply chain optimisation for recycling and remanufacturing sustainable management in end-of-life vehicles: a mini-review and classification. Waste Management and Research, 41 (3). pp. 554-565. ISSN 0734-242X

Chow, Zhen Pei and Ahmad, Zaini and Wong, King Jye (2023) Temperature effects on the low-velocity impact of FML panels: experimental and numerical analyses. International Journal of Impact Engineering, 172 (104403). NA-NA. ISSN 0734-743X

Chow, Zhen Pei and Ahmad, Zaini and Wong, King Jye (2023) Temperature effects on the low-velocity impact of FML panels: Experimental and numerical analyses. International Journal of Impact Engineering, 172 (104403). NA-NA. ISSN 0734-743X

D

Damahuri, Nur Afiqa Syaheera and Ahmad, Nurulnatisya and Othman, Nor Fadzilah and Mohd. Yusof, Ab. Aziz and Osman, Kahar and Md. Isa, Kamariah (2023) Thermogravimetric analysis on empty fruit bunch, rice husk, and rice straw for feedstock in biomass gasification. In: 2nd International Conference on Biomass Utilization and Sustainable Energy, ICoBiomasSE 2022, 20 September 2022 - 21 September 2022, Arau, Perlis, Malaysia - Virtual, Online.

Dambatta, M. S. and Izman, S. and Auwal, S. T. and Kurniawan, D. and Ramesh, S. and Abdullahi, U. and Mas Ayu, H. and Shah, A. and Gidado, A. Y. and Ibrahim, Auwal and Ibrahim, Musa Alhaji (2023) Improving microstructural homogeneity and reducing grain size of Zn-3Mg alloy through ECAP. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021-10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Daud, Rosdi and Hassan, Mas Ayu and Redzuan, Norizah and Ahmad Kafrawi Nasution, Ahmad Kafrawi Nasution (2023) Deformation behaviour of a high carbon Co–Cr–Mo medium-entropy alloy via thermal oxidation. In: 6th Asia Pacific Conference on Manufacturing System and the 5th International Manufacturing Engineering Conference, APCOMS-IMEC 2022, 27 October 2022 - 28 October 2022, Surakarta, Indonesia.

Devi Rianti, Devi Rianti and Alqomariyah Eka Purnamasari, Alqomariyah Eka Purnamasari and Rifayinqa Ruyani Putri, Rifayinqa Ruyani Putri and Noor Zain Salsabilla, Noor Zain Salsabilla and Faradillah, Faradillah and Elly Munadziroh, Elly Munadziroh and Titien Hary Agustantina, Titien Hary Agustantina and Asti Meizarini, Asti Meizarini and Anita Yuliati, Anita Yuliati and Syahrom, Ardiyansyah (2023) The compressive strength and static biodegradation rate of chitosan-gelatin limestone-based carbonate hydroxyapatite composite scaffold. Dental Journal, 56 (3). pp. 160-165. ISSN 1978-3728

Djabir, Djabir Abdoulaye and Mat, Mohamad Nur Hidayat and Hariri, Azian (2023) CFD investigation on thermal comfort in open spaces library in tropical climate. CFD Letters, 15 (9). pp. 83-101. ISSN 2180-1363

Dzulkifli, Mohd. Haziq and A. Majid, Rohah and Yahya, Mohd. Yazid (2023) Influence of sodium-montmorillonite nanoclay on flammability, thermal stability, morphology, and mechanical properties of rigid water-blown palm oil-based polyurethane foam. Cellular Polymers, 42 (3-4). pp. 140-155. ISSN 0262-4893

Dzulkifli, Mohd. Haziq and Zainal, Siti Zaima and A. Majid, Rohah and Yahya, Mohd. Yazid (2023) Industrial rockwool fiber wastes as reinforcement in rigid polyurethane foam: Preparation and characterization. Fibers and Polymers, 24 (1). pp. 329-336. ISSN 1229-9197

E

Elfarouk, Omar and Wong, Kuan Yew and Ahmad, Shamraiz (2023) Stochastic closed-loop supply chain models: literature review, recent developments, and future research directions. International Journal of Operational Research, 47 (3). pp. 357-383. ISSN 1745-7645

Elhawary, Shehab and Saat, Aminuddin and Abdul Wahid, Mazlan and Md. Zain, Mohd. Zarhamdy (2023) Effect of nitrous oxide on laminar burning velocity, hydrodynamic, and diffusive–thermal instability of biogas combustion. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3073-3088. ISSN 1388-6150

Emelia Sari, Emelia Sari and Ma'aram, Azanizawati and Shaharoun, Awaluddin Mohamed and Satria, Ridha and Amran, Tiena Gustina (2023) Key drivers of sustainable maintenance practices for automotive industry. In: 13th International Seminar on Industrial Engineering and Management, ISIEM 2021, 28 July 2021, Bandung, Indonesia.

F

Fong, Collin and Chin, Desmond Daniel and Ahmad, Hilton (2023) Static shear strength of single-lap joint using eggshell-toughened epoxy as adhesive agent. International Journal of Integrated Engineering, 15 (2). pp. 104-112. ISSN 2229-838X

Fadara, Taiwo Gbolarumi and Wong, Kuan Yew (2023) A decision support system for sustainable textile product assessment. Textile Research Journal, 93 (9-10). pp. 1971-1989. ISSN 0040-5175

Fadara, Taiwo Gbolarumi and Wong, Kuan Yew and Mohd. Maulana, Muhd. Ikmal Isyraf (2023) Sustainability assessment of textile and apparel sector: a review of current approaches and tools. Nigerian Journal of Technological Development, 20 (3). pp. 1-20. ISSN 0189-9546

Fang, Xueliang and Chiong, Meng-Choung and Jiang, Xinyue and Yu, Lih Jiun and Chen, Xinwen and Muhieldeen, Mohammed W. and Al-Talib, Ammar Abdulaziz Majeed and Lim, Wei Hong and Wong, Keng Yinn (2023) Energy-economy-environment assessments of refrigerants R152a and R134a in a vapor compression refrigeration system using a variable displacement oil-free linear compressor. Environmental Science and Pollution Research, 30 (45). pp. 101223-101233. ISSN 0944-1344

Fang, Xueliang and Chiong, Meng-Choung and Yu, Lih Jiun and Li, Zhaohua and Chen, Xinwen and Hassan, Suhana and Wong, Keng Yinn (2023) Moving magnet linear compressor: Operating characteristics under resonance and off-resonance frequencies. Journal of King Saud University - Science, 35 (3). pp. 1-8. ISSN 1018-3647

Faridmehr, Iman and Nehdi, Moncef L. and Nejad, Ali Farokhi and Valerievich, Kiyanets Aleksandr (2023) Performance of partially grouted reinforced masonry walls with bed-joint reinforcement: parametric and optimization investigation. Archives of Civil and Mechanical Engineering, 24 (2). NA-NA. ISSN 1644-9665

Fathollahi-Fard, Amir M. and Tian, Guangdong and Ke, Hua and Fu, Yaping and Wong, Kuan Yew (2023) Efficient multi-objective metaheuristic algorithm for sustainable harvest planning problem. Computers and Operations Research, 158 (NA). NA-NA. ISSN 0305-0548

Fathollahi-Fard, Amir M. and Wong, Kuan Yew and Mohammed Aljuaid, Mohammed Aljuaid (2023) An efficient adaptive large neighborhood search algorithm based on heuristics and reformulations for the generalized quadratic assignment problem. Engineering Applications of Artificial Intelligence, 126 (NA). NA-NA. ISSN 0952-1976

Firouzi, Alireza (2023) Estimating change point in multivariate processes via simultaneous mean vector and covariance matrix. PhD thesis, Universiti Teknologi Malaysia.

Foong, Shin Ying and Chan, Yi Herng and Lock, Serene Sow Mun and Chin, Bridgid Lai Fui and Yiin, Chung Loong and Cheah, Kin Wai and Loy, Adrian Chun Minh and Yek, Peter Nai Yuh and Chong, William Woei Fong and Lam, Su Shiung (2023) Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects. Bioresource Technology, 369 (NA). NA-NA. ISSN 0960-8524

Foong, Shin Ying and Liew, Rock Keey and Yek, Peter Nai Yuh and Han, Chai Sean and Phang, Xue Yee and Chen, Xiangmeng and Chong, William Woei Fong and Verma, Meenakshi and Lam, Su Shiung (2023) Microwave heating combined with activated carbon reaction bed: an energy-saving approach to convert seawater into freshwater. Energy, 27 (NA). NA-NA. ISSN 2036-05442

G

Ganasan, Hema Vharman and Md. Zain, Mohd. Zarhamdy and Ab. Wahid, Mastura and Mohamed Hussein, Mohamed Hussein and Jamaludin, Azman (2023) Performance testing of pico hydropower turbine prototype. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Jabbar, Mostafa Abbas (2023) Microstructure examination and tensile properties of Al-20%Mg2Si-XZRO2 hybrid composites. Malaysian Journal of Microscopy, 19 (2). pp. 163-172. ISSN 1823-7010

Ghandvar, Hamidreza and Jabbar, Mostafa Abbas and Petrů, Michal and Abu Bakar, Tuty Asma and Ler, Lim Jia and Rahimian Koloor, Seyed Saeid (2023) Role of YSZ particles on microstructural, wear, and corrosion behavior of Al-15%Mg2Si hybrid composite for marine applications. Journal of Marine Science and Engineering, 11 (5). pp. 2-18. ISSN 2077-1312

Ghazali, Ahmad Dairobi and A. Wahid, Mazlan and Mazlan, Muhammad Amri and Azeman, Muhammad Hafizuddin (2023) Rotating detonation engine experiment with asymmetric vortex combustion chamber shape. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Gheidan, Abdelgader A. S. and Abdul Wahid, Mazlan and Li, Lei and Wahid, Amri M. A. and Opia, Anthony C. (2023) Numerical investigation on air-fuel configurations on the emission features in a vortex flameless combustion at various thermal intensity. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Gheidan, Abdelgader A. S. and Abdul Wahid, Mazlan and Opia, Anthony C. (2023) Flameless combustion mode as a promising trend: A review on its fundamental, role towards emissions reduction, fuel consumption and performance enhancement. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Gu, Jie and Chong, Cheng Tung and Mong, Guo Ren and Ng, Jo-Han and Chong, WilliamWoei Fong (2023) Determination of pyrolysis and kinetics characteristics of chicken manure using thermogravimetric analysis coupled with particle swarm optimization. Energies, 16 (4). pp. 1-22. ISSN 1996-1073

H

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2023) Flow characterization of low sweep MULDICON wing at low speed. Aircraft Engineering and Aerospace Technology, 95 (7). pp. 1081-1091. ISSN 1748-8842

Hamzah, N. and Mohd. Yasin, M. F. and Zainal, M. T. and Mohd. Sies, M. and Mohd. Yusop, M. Z. and Chong, C. T. and Mohd. Subha, N. A. and Rosmi, M. S. (2023) Morphology and growth region analysis of carbon nanotubes growth in water-assisted flame synthesis. Combustion Science and Technology, 195 (4). pp. 860-877. ISSN 0010-2202

Hartatiek, Hartatiek and Yudyanto, Yudyanto and Siska Amalia, Siska Amalia and Nurul Mutowiah, Nurul Mutowiah and Joko Utomo, Joko Utomo and Ahmad, Norhayati (2023) The silver ion substitution (Ag+) on nanoparticles of hydroxyapatite for contrast agent materials. In: 2nd International Conference on Condensed Matters and Advanced Materials, IC2MAM 2020, 27 October 2020, Virtual, Online, Malang, Indonesia.

Hasan, Mohd. Faizal and Mat Ail, Mohamad Zulhilmi and Muhamad Said, Mohd. Farid (2023) Combustion behaviour of palm kernel shell torrefied by mild pressurization technique. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Hasan, Nurul and Saeid, Nawaf and Rosli, Roslynna and Rahman, Md. Mizanur (2023) Turbulent flow and micro-particle collection in the bifurcation of human lungs. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021-10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Hashmi, Mudassar Hussain (2023) Fractal and probabilistic analysis on fatigue crack growth rate of metallic materials. PhD thesis, Universiti Teknologi Malaysia.

Hashmi, Mudassar Hussain and Abdul Hamid, Mohd. Fauzi and Tamin, Mohd. Nasir (2023) A robust probabilistic fatigue crack growth model based on walker's crack growth rate equation for metallic materials. Probabilistic Engineering Mechanics, 72 (NA). NA. ISSN 0266-8920

Hasnol, Muhammed Zakariya (2023) Friction stir welding with different tool profiles on structure and hardness of dissimilar aluminium alloy AA5083 and AA6061-T6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Hassan, Ahmed G. and Mat Yajid, M. A. and Saud, S. N. and Abu Bakar, T. A. and Alsakkaf, Ahmed (2023) Tribological behavior of a multi-walled carbon nanotube coated porous ti-ta shape memory alloy. Journal of Materials Engineering and Performance, 32 (1). pp. 55-67. ISSN 1059-9495

Hassan, M. H. and Jamali, A. and R., Lidyana and Suffian, M. S. Z. M. and Hadi, M. S. and Mat Darus, I. Z. (2023) Grey wolf optimization for intelligent parametric modeling of gradient flexible plate structure. Journal of Applied Science and Engineering (Taiwan), 26 (9). pp. 1207-1214. ISSN 2708-9967

Hatif, Ihab Hasan and Mohamed Kamar, Haslinda and Kamsah, Nazri and Wong, Keng Yinn (2023) Comparative evaluation of air distribution systems for controlling the airborne infection risk in indoor environments. Journal of Building Engineering, 79 (107913). NA-NA. ISSN 2352-7102

Hatif, Ihab Hasan and Mohamed Kamar, Haslinda and Kamsah, Nazri and Wong, Keng Yinn and Tan, Huiyi (2023) Influence of office furniture on exposure risk to respiratory infection under mixing and displacement air distribution systems. Building and Environment, 239 (NA). NA-NA. ISSN 0360-1323

Hendri Maja Saputra, Hendri Maja Saputra and Bany Abdussalam, Bany Abdussalam and Catur Hilman A. H. B. Baskoro, Catur Hilman A. H. B. Baskoro and Mohd. Nor, Nur Safwati and Tesya Permadi, Tesya Permadi and Muhammad Yudhi Rezaldi, Muhammad Yudhi Rezaldi (2023) Counterweight mechanism of prismatic joint at 4-DOF PRRR manipulator for robotic charging station (RoCharg-v1). In: 10th International Conference on Computer, Control, Informatics and its Applications, IC3INA 2023, 04 October 2023 - 05 October 2023, Virtual, Bandung, Indonesia.

Hendri Maja Saputra, Hendri Maja Saputra and Tesya Permadi, Tesya Permadi and Catur Hilman A. H. B. Baskoro, Catur Hilman A. H. B. Baskoro and Mohd. Nor, Nur Safwati and Bany Abdussalam, Bany Abdussalam and Muhammad Yudhi Rezaldi, Muhammad Yudhi Rezaldi (2023) Effect of IMU sensor positioning on 1-DOF angle measurement accuracy for robotic charging station (RoCharg-v1) manipulator. In: 0th International Conference on Computer, Control, Informatics and its Applications, IC3INA 2023, 04 October 2023 - 5 October 2023, Virtual, Bandung, Indonesia.

Hosseinzadeh-Bandbafha, Homa and Tan, Yie Hua and Kansedo, Jibrail and Mubarak, N. M. and Liew, Rock Keey and Yek, Peter Nai Yuh and Aghbashlo, Mortaza and Ng, Hui Suan and Chong, William Woei Fong and Lam, Su Shiung and Verma, Meenakshi and Peng, Wanxi and Tabatabaei, Meisam (2023) Assessing biodiesel production using palm kernel shell-derived sulfonated magnetic biochar from the life cycle assessment perspective. Energy, 282 (NA). NA-NA. ISSN 0360-5442

Hu, Xinyu and Fang, Yizhou and Wu, Yanan and Wu, He and Kang, Hooi Siang (2023) An approach to assess the potential of wave energy resources based on directional energy flux. Ocean Engineering, 287 (NA). NA. ISSN 0029-8018

I

Idris, Rubia and Chong, William Woei Fong and Mong, Guo Ren and Ali, Atikah and Adnan, Farrah Anis Fazliatul and Chong, Harry Lye Hin and Chong, Cheng Tung (2023) Microwave susceptor positional configuration for palm empty fruit bunch and waste tire co-pyrolytic oil yield and selectivity of value-added chemicals. Journal of Analytical and Applied Pyrolysis, 174 (106129). NA-NA. ISSN 0165-2370

Ibrahim, Mohammad Nur Hakimin and Chiong, Meng Soon and Kim, Jeyoung and Md. Sah, Muhammad Hanafi and Mohamad, Mahadhir and Chun, Mein Soon and Srithar, Rajoo (2023) 1-D engine modeling of 4-cylinder turbocharged gasoline engine. Journal of Transport System Engineering (JTSE), 9 (1). pp. 19-27. ISSN 2289-9790

Ibrahim, Muhammad Hilmi and Hamzah, Norikhwan and Mohd. Yusop, Mohd. Zamri and Ni Luh Wulan Septiani, Ni Luh Wulan Septiani and Mohd. Yasin, Mohd. Fairus (2023) Control of morphology and crystallinity of CNTs in flame synthesis with one-dimensional reaction zone. Beilstein Journal of NanotechnologyVolume , Pages -, 14 (NA). pp. 741-750. ISSN 2190-4286

Irna Farikhah, Irna Farikhah and E. A. Elsharkawy, E. A. Elsharkawy and Harto Nuroso, Harto Nuroso and Mega Novita, Mega Novita and Dian Marlina, Dian Marlina and Kwartriani Rahmatunnisa, Kwartriani Rahmatunnisa and Abd. Rahim, Irfan and Md. Zain, Mohd. Zarhamdy and Mohd. Paad, Khairunnisa and Masruri, Ahmad Nadhif (2023) Study on the optimal stack diameter on the efficiency of thermoacoustic engine. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Isham, Muhd. Firdaus and Saufi, Mohd Syahril Ramadhan and Abu Hasan, Muhammad Danial and Abdul Saad, Wan Aliff and Leong, Muhammad Salman and Lim, Meng Hee and Ahmad, Zair Asrar (2023) Bearing fault diagnosis using extreme learning machine based on artificial gorilla troops optimizer. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022, Pekan, Pahang, Malaysia.

Islam, Md. Ashequl and Kamarrudin, Nur Saifullah and Daud, Ruslizam and Ibrahim, Ishak and Mohdamad Razlan, Zuradzman and Rani, Muhammad Faiz Hilmi (2023) Drill bit design and its effect on temperature distribution and osteonecrosis during implant site preparation: an experimental approach. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 - 5 September 2023, Kuala Lumpur, Malaysia.

Ismail, Ahmad Abdul Mun’im and Rosdin, Muhammad Rafiq Haikal and Rozhan, Alya Naili and Hadi Purwanto, Hadi Purwanto and Abdul Hamid, Abd. Malek and Md. Din, Muhamad Faiz and Mohd. Yasin, Mohd. Fairus and Ani, Mohd. Hanafi (2023) Blast furnace slag cement clinker production using limestone-hot blast furnace slag mixture. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 - 10 August 2022, Kuala Lumpur, Malaysia.

Ismail, Najib and A. Wahid, Mazlan and Sa’at, Aminuddin and Abubakar, Shitu (2023) A review on the combustion characteristics of an asymmetric swirling combustor in flameless mode. Evergreen, 10 (3). pp. 1522-1537. ISSN 2189-0420

Ismail, Najib Aminu and Abdul Wahid, Mazlan and Sa’at, Aminuddin and Shitu, Abubakar and Abdulrahman, Mohammed Bashir (2023) Effect of recirculation ratio on the combustion characteristics of an asymmetric swirling flameless combustor using biogas. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (1). pp. 52-65. ISSN 2289-7879

Ismail, Najib Aminu and Alwan, Raid Abid and Abdul Wahid, Mazlan and Sa'At, Aminuddin and Abdulrahman, Mohammed Bashir (2023) Effect of preheating on combustion characteristics of a swirling flameless combustor. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

J

Jalal, Mohd. Rajali and Abd. Kader, Ab. Saman and Abdul Hamid, Mohd. Foad and Kang, Hooi Siang (2023) A stochastic petri net-based approach for operational performance estimation of quay cranes. Quality and Reliability Engineering International, 39 (5). pp. 1660-1680. ISSN 0748-8017

Jama’a, Mohd. Jazmi Asyraff and Gurunathan, Balamurugan Annamalai and Botas, Ricardo Martinez and Khairuddin, Uswah (2023) Comparison of secondary flow characteristics in mixed-flow turbine between nozzleless and symmetric nozzle vane angles under steady-state flow at full admission. Energies, 16 (10). pp. 1-29. ISSN 1996-1073

Jasmi, Ahmad Razin and Musa, Nur Amalina and Zuber, Muhammad Ahmar and Mohd. Lazi, Mohd. Khairul Afzan and Wan Omar, Wan Zaidi (2023) Potential development of organic Rankine cycle (ORC) power generation system by utilizing heat from natural hot-spring in Malaysia. In: 1st National Symposium on Technologies for Sustainable Urban Development, TechSUD 2023, 13 May 2023 - 14 May 2023, Georgetown, Penang, Malaysia.

Jastaneyah, Zuhair and Kamar, Haslinda and Al Garalleh, Hakim (2023) A review paper on thermal comfort and ventilation systems in educational buildings: nano-mechanical and mathematical aspects. Journal of Nanofluids, 2 (1). pp. 1-17. ISSN 2169-432X

Jastaneyah, Zuhair and M. Kamar, Haslinda and Alansari, Abdulrahman and Al Garalleh, Hakim (2023) A comparative analysis of standard and nano-structured glass for enhancing heat transfer and reducing energy consumption using metal and oxide nanoparticles: a review. Sustainability (Switzerland), 15 (12). pp. 1-15. ISSN 2071-1050

Jin, Xin and Liang, Yunyi and Wang, Jin and Wang, Qin and Wu, Yingji and Chong, William W. F. and Christian Sonne, Christian Sonne and Lam, Su Shiung and Xia, Changlei (2023) Hierarchical self-assembly of polyphenolic functionalized magnetic superstructure for enhanced removal of organic dyes. Chemical Engineering Journal, 457 (NA). NA-NA. ISSN 1385-8947

Johar, M. and Chong, W. W. F. and Wong, K. J. (2023) Moisture absorption and tensile behaviour of hybrid carbon/flax composites. Fibers and Polymers, 24 (5). pp. 1799-1810. ISSN 1229-9197

Jubair, Abdullah and Che Daud, Zul Hilmi and Mazali, Izhari Izmi and Asus, Zainab and Abdul Hamid, Mohd. Kameil (2023) Design of an experimental test rig to determine the battery internal resistance beyond normal operating condition. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Pahang, Malaysia - Virtual, Online.

K

Kim, Jeyoung and Chiong, Meng Soon and Rajoo, Srithar (2023) Effect of turbine upstream geometry on pulsating flow and turbocharged si-engine performance. International Journal Of Automotive Technology, 24 (2). pp. 527-539. ISSN 1229-9138

Kamaruddin, Zatil Hafila and Jumaidin, Ridhwan and Kamaruddin, Zatil Hazrati and Muhammad Rizal, Muhammad Asyraf and Razman, Muhammad Rizal and Khan, Tabrej (2023) Effect of Cymbopogan citratus fibre on physical and impact properties of thermoplastic cassava starch/palm wax composites. Polymers, 15 (10). pp. 1-14. ISSN 2073-4360

Kamarudin, Maslinda (2023) Damage-based fretting wear model for life prediction of steel wire ropes. PhD thesis, Universiti Teknologi Malaysia.

Kek, Hong Yee and Tan, Huiyi and Chin, Desmond Daniel Vui Sheng and Lee, Yi and Ismail, Nur Dayana and Deris, Muhd. Suhaimi and Mohamed Kamar, Haslinda and Wong, Keng Yinn (2023) A CFD assessment on ventilation strategies in mitigating healthcare-associated infection in single patient ward. Progress in Energy and Environment, 24 (NA). pp. 35-45. ISSN 2600-7762

Kek, Hong Yee and Tan, Huiyi and Othman, Mohd. Hafiz Dzarfan and Nyakuma, Bemgba Bevan and Goh, Pei Sean and Wong, Syie Luing and Deng, Xiaorui and Leng, Pau Chung and Yatim, Ardiyansyah Saad and Wong, Keng Yinn (2023) Perspectives on human movement considerations in indoor airflow assessment: a comprehensive data-driven systematic review. Environmental science and pollution research international, 30 (58). pp. 121253-121268. ISSN 1614-7499

Kek, Hong Yee and Tan, Huiyi and Wong, Keng Yinn and Kuan, Garry (2023) Common sports injury in karate practitioner: a bibliometric analysis and mini-review (1992–2021). In: 9th Asian South Pacific Association of Sport Psychology International Congress, ASPASP 2022, 9 August 2022 - 11 August 2022, Kuching, Sarawak, Malaysia.

Keshavarzi, Mohsen and Mohammadi, Pouya and Rastegari, Hajar and Lam, Su Shiung and Abas, Mohd. Azman and Chong, William Woei Fong and Hajiahmad, Ali and Peng, Wanxi and Aghbashlo, Mortaza and Tabatabaei, Meisam (2023) Investigation of ketal-acetin mixture synthesized from glycerol as a renewable additive for gasoline-ethanol fuel blend: Physicochemical characterization and engine combustion, performance, and emission assessment. Fuel, 348 (NA). NA-NA. ISSN 0016-2361

Khan, Safdar Ali (2023) Interlaminar fatigue damage model of carbon fiber-reinforced polymer composite laminates. PhD thesis, Universiti Teknologi Malaysia.

Khan, Safdar Ali and Koloor, Seyed Saeid Rahimian and Wong, King Jye and Siebert, Geralt and Tamin, Mohd. Nasir (2023) A fatigue model to predict interlaminar damage of FRP composite laminates subjected to mode I load. Polymers, 15 (3). pp. 1-17. ISSN 2073-4360

Khan, Safdar Ali and Koloor, Seyed Saeid Rahimian and Wong, King Jye and Yidris, Noorfaizal and Mohd. Yusof, Ab. Aziz and Mohd. Szali Januddi, Mohd. Al Fatihhi and Tamin, Mohd. Nasir and Johar, Mahzan (2023) Strain rate effect on mode I debonding characterization of adhesively bonded aluminum joints. Processes, 11 (1). pp. 1-14. ISSN 2227-9717

Kharboot, Layla Haythoor and Fadil, Nor Akmal and Abu Bakar, Tuty Asma and Mohd. Najib, Abdillah Sani and Nordin, Norhuda Hidayah and Ghazali, Habibah (2023) A review of transition metal sulfides as counter electrodes for dye-sensitized and quantum dot-sensitized solar cells. Materials, 16 (7). pp. 1-27. ISSN 1996-1944

Khoo, Pui San and Rushdan, Ahmad Ilyas and Uda, Muhammad Nur Aiman and Abu Hassan, Shukur and Nordin, Abu Hassan and Abdul Samad, Norfarhana and Ab. Hamid, Nur Hafizah and Rani, Mohd. Saiful Asmal and Hairul Abral, Hairul Abral and Norrrahim, Mohd. Nor Faiz and Knight, Victor Feizal and Lee, Chuan Li and Shafi, Ayu Rafiqah (2023) Starch-based polymer materials as advanced adsorbents for sustainable water treatment: current status, challenges, and future perspectives. Polymers, 15 (14). pp. 1-31. ISSN 2073-4360

Khor, Wei Han and Goh, Jie Heng and Yew, Qi Ming and Kang, Hooi-Siang and Lim, Jun-Wei and Iwamoto, Koji and Tang, Collin Howe-Hing and Lee, Kee-Quen and Wu, Yun-Ta and Goh, Pei Sean (2023) Residence time distribution of an offshore floating photobioreactor under hydrodynamic sloshing effect. Chemical Engineering Research and Design, 198 (NA). pp. 340-348. ISSN 0263-8762

Khor, Wei Han and Goh, Jie Heng and Yew, Qi Ming and Kang, Hooi-Siang and Lim, Jun-Wei and Koji, Iwamoto and Tang, Collin Howe-Hing and Goh, Pei Sean (2023) Residence time distribution of an irregular octagonal tank under hydrodynamic sloshing effect. Chemical Engineering Transactions, 106 (NA). pp. 1303-1308. ISSN 2283-9216

Koh, Qi Yun and Rajoo, Srithar and Wong, Kuan Yew (2023) An overview of Organic Rankine Cycle for waste heat recovery on offshore oil and gas platform. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 - 5 November 2021, Virtual, UMP, Pahang, Malaysia.

Koh, Qi Yun and Rajoo, Srithar and Wong, Kuan Yew (2023) Prospects of energy recovery in offshore oil and gas operations. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 - 5 November 2021, Virtual, UMP, Pahang, Malaysia.

Kuah, Chuen Tse and Koh, Qi Yun and Rajoo, Srithar and Wong, Kuan Yew (2023) Waste heat recovery research – a systematic bibliometric analysis (1991 to 2020). Environmental Science and Pollution Research, 30 (28). pp. 72074-72100. ISSN 0944-1344

Kueh, Ahmad Beng Hong and Tan, Juin Hwee and Abu Hassan, Shukur and Wahit, Mat Uzir (2023) Repeated impact response of bio-inspired sandwich beam with arched and honeycomb bilayer core. Structural Engineering and Mechanics, 85 (6). pp. 755-764. ISSN 1225-4568

Kumar, Mithun and Isloor, Arun M. and Nayak, M. C. S. and Todeti, Somasekhara Rao and Padaki, Mahesh and Ismail, Ahmad Fauzi (2023) Hydrophilic polydopamine/polyvinylpyrrolidone blended polyphenylsulfone hollow fiber membranes for the removal of arsenic-V from water. Journal of Environmental Chemical Engineering, 11 (5). NA-NA. ISSN 2213-3437

L

Lee, Mei Bao and Lee, Chiew Tin and Chong, William Woei Fong and Mohd. Sanip, Suhaila (2023) A quick and facile solution -processed method for PEDOT:PSS transparent conductive thin film. IIUM Engineering Journal, 24 (1). pp. 170-182. ISSN 1511-788X

Latif, Kamran and Rodriguez, Efrain and Bonnard, Renan and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2023) Expert system to implement STEP-NC data interface model on CNC machine. International Journal Of Advanced Manufacturing Technology, 129 (11-12). pp. 5371-5385. ISSN 0268-3768

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2023) New method to utilize STEP-NC data interface model for 3D printing. Progress in Additive Manufacturing, 8 (6). pp. 1677-1686. ISSN 2363-9512

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra and Bonnard, Renan and Rodriguez, Efrain and Pacheco, Nazareno de Oliveira (2023) New system architecture and algorithm design for indirect STEP-NC implementation. International Journal on Interactive Design and Manufacturing, 17 (4). pp. 1895-1903. ISSN 1955-2513

Le, Huyen Thi and Punurai, Wonsiri and Wan Zawawi, Noor Amila and Yaakob, Omar and Nguyen, Nhung Thi Phuong and Le, Thanh Thanh and Van Nguyen, Kiet and Sari Amelia, Sari Amelia and Kamarudin, Nurul Anis and Kang, Hooi-Siang and Van Le, Sy (2023) A review of mercury waste management in the ASEAN oil and gas industry. Journal of Hazardous, Toxic, and Radioactive Waste, 27 (1). NA-NA. ISSN 2153-5493

Lee, Mei Bao and Lee, Chiew Tin and Chong, William Woei Fong and Wong, King Jye (2023) Post-thermal annealed monolayer graphene healing elucidated by Raman spectroscopy. Journal of Materials Science, 58 (25). pp. 10288-10302. ISSN 0022-2461

Leong, Wai Hong and Lim, Jun Wei and Rawindran, Hemamalini and Liew, Chin Seng and Lam, Man Kee and Ho, Yeek Chia and Khoo, Kuan Shiong and Katsuki, Kusakabe and Abdelghani, Heba Taha M. and Ho, Chii-Dong and Ng, Hui-Suan and Usman, Anwar and Kang, Hooi-Siang (2023) Energy balance and life cycle assessments in producing microalgae biodiesel via a continuous microalgal-bacterial photobioreactor loaded with wastewater. Chemosphere, 341 (NA). NA-NA. ISSN 0045-6535

Leow, Jing Shuo and Leow, Jing Shun and Kang, Hooi Siang and Yaakob, Omar and Punurai, Wonsiri and Sari Amelia, Sari Amelia and Le, Huyen Thi (2023) Technical preparedness in Southeast Asia region for onshore dismantling of offshore structures: gaps and opportunities. Ocean Systems Engineering, 13 (1). pp. 79-95. ISSN 2093-6702

Li, Bo Yu and Tee, Meng Yang and Nge, Kie Seng and Ng, Andrew Kay Lup and Chong, William Woei Fong and Ng, Jo-Han and Mong, Guo Ren (2023) Comparison kinetic analysis between Coats-Redfern and Criado’s master plot on pyrolysis of horse manure. Chemical Engineering Transactions, 106 (NA). pp. 1273-1278. ISSN 2283-9216

Ling, Min and Mehrez, Sadok and Vignesh, R. Vaira and Mohd. Zain, Azlan and Paidar, Moslem and Kharche, Nitin A. and Mohanavel, V. (2023) Investigation on underwater friction stir processing of AZ-61 magnesium alloy. Materials Today Communications, 36 (NA). NA. ISSN 2352-4928

Liu, Shoufa and Paidar, Moslem and Oladimeji Ojo, Olatunji and Poková, Michaela Šlapáková and Mehrez, Sadok and Mohd. Zain, Azlan and Zhao, Qiaorong and Wang, Jinpeng (2023) Friction stir processing of hybridized AZ31B magnesium alloy-based composites by adding CeO2 and ZrO2powders: mechanical, wear, and corrosion behaviors. Journal of Materials Research and Technology, 24 (NA). pp. 1949-1972. ISSN 2238-7854

Low, Chia Wei and Hamdan, Siti Hartini and Chong, William Woei Fong (2023) Thermal assessment on tribological properties of turbocharger journal bearing. Journal of Transport System Engineering, 9 (1). pp. 1-11. ISSN 2289–9790

Luo, Jing and Foong, Shin Ying and Chong, William Woei Fong and Verma, Meenakshi and Lam, Su Shiung and Sonne, Christian and Li, Qian and Ge, Shengbo (2023) Pyrolysis and characterization of poplar mixed nanometal oxide catalysts. Sustainable Chemistry and Pharmacy, 32 (NA). NA. ISSN 2352-5541

M

Mat, Mohamad Nur Hidayat and Azman, Muhammad Faizal and M. Yusup,, Eliza (2023) Effect of airborne pathogen transmission released by an assailant in a mosque using CFD simulation. International Journal of Integrated Engineering, 15 (4). pp. 134-145. ISSN 2229-838X

M. Rosnani, Amiera Aqilah and Hadi, Muhamad Sukri and Jamali, Annisa and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Ab. Talib, Mat Hussin (2023) Hub angle control of double link flexible robotic arm manipulator using PID controller tuned by bacterial foraging optimization algorithm. In: 13th International Conference on Power, Energy and Electrical Engineering, CPEEE 2023, Tokyo, Japan, 25 February 2023 - 27 February 2023.

M. Sani, G. and Abas, Mohd. Azman and Mohd. Yusoff, Nurul Syakima and Muhamad Said, Mohd. Farid (2023) Site selection for electric vehicle charging stations using GIS with MCDM AHP FAHP and TOPSIS techniques. a review. In: International Graduate Conference of Built Environment and Surveying 2023, GBES 2023, 17 September 2023 - 18 September 2023, Hybrid, Johor Bahru, Johor, Malaysia.

Ma, Gang and Jin, Conglin and Wang, Hong Wei and Li, Peng and Kang, Hooi Siang (2023) Study on dynamic tension estimation for the underwater soft yoke mooring system with LSTM-AM neural network. Ocean Engineering, 267 (NA). NA. ISSN 0029-8018

Ma, Quanjin and Rejab, M. R. M. and Abu Hassan, Shukur and Azeem, Mohammad and Saffirna, M. S. (2023) Failure behavior analysis of the spherical-roof contoured core (Srcc) under quasi-static loading: a numerical study. Journal of Failure Analysis and Prevention, 23 (2). pp. 511-519. ISSN 1547-7029

Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Muhammad Rizal, Muhammad Asyraf and Syamsir, Agusril and Mohd. Supian, Abu Bakar and Elizaveta, Bobrynina (2023) Experimental and analytical investigation of flexural behavior of carbon nanotube reinforced textile based composites. Materials, 16 (6). pp. 1-14. ISSN 1996-1944

Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Muhammad Rizal, Muhammad Asyraf and Syamsir, Agusril and Mohd. Supian, Abu Bakar and Mamaev, Nicolay (2023) Buckling analysis of CNT-reinforced polymer composite beam using experimental and analytical methods. Materials, 16 (2). pp. 1-17. ISSN 1996-1944

Manda, Muhamad Soffi and Mat Rejab, Mohd. Ruzaimi and Abu Hassan, Shukur (2023) Evaluation of tin slag polymer concrete column compressive behavior using finite element analysis. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 6 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Manda, Muhamad Soffi and Mat Rejab, Mohd. Ruzaimi and Abu Hassan, Shukur and Wahit, Mat Uzir and Didik Nurhadiyanto, Didik Nurhadiyanto (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material confinement. Polymers, 15 (4). pp. 1-19. ISSN 2073-4360

Mansingh, Bright Brailson and Binoj, Joseph Selvi and Tan, Ze Quan and Wong, Wai Leong Eugene and mornsakchai, ATaweechai and Hassan, Shukur Abu and Goh, Kheng Lim (2023) Characterization and performance of additive manufactured novel bio-waste polylactic acid eco-friendly composites. Journal of Polymers and the Environment, 31 (6). pp. 2306-2320. ISSN 1566-2543

Mansor, Azura and Ariffin, Ainnur Farhana and Yusof, Norimah and Mohd., Suhaili and Ramalingam, Saravana and Md. Saad, Amir Putra and Baharin, Ruzalina and Ng, Wuey Min (2023) Effects of processing and gamma radiation on mechanical properties and organic composition of frozen, freeze-dried and demineralised human cortical bone allograft. Cell and Tissue Banking, 24 (1). pp. 25-35. ISSN 1389-9333

Mansor, Muhammad Sideq Abu and Ghazali, Ahmad Dairobi and Ardani, Mohd. Ibthisham and Ab. Talib, Mat Hussin and Che Daud, Zul-Hilmi and Asus, Zainab and Mat Saad, Mohd. Fikri Azri and Zainol, Zaimi and Yusof, Suhaimi and Zakee, Mohd. Zulfahmi (2023) Forced air cooling for battery module on series connected batteries: temperature variation due to non-uniform flow across channel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (1). pp. 226-236. ISSN 2289-7879

Manu, Manikandan Nair and Roy, K. E. Reby and Mubarak Ali, M. and Abu Hassan, Shukur and Ligori, M. Susan (2023) Experimental investigation on the influence of silanized graphene coatings on carbon fiber composites as toughening agents at low temperatures. Materials Letters, 335 (NA). NA. ISSN 0167-577X

Mat, Mohamad Nur Hidayat and Mohd. Ghazali, Normah and Shamsuddin, Hielfarith Suffri and Estelle, Patrice (2023) Thermofluid behaviour of boron nitride nanotube nanofluid in a microchannel under optimized conditions. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3035-3044. ISSN 1388-6150

Mat, Mohamad Nur Hidayat and Muhammad Fidaa, Muhammad Zulhilmi (2023) Impact of MXene nanoparticle on thermohydraulic performance in a microchannel heat sink: effect of nanoparticle size. Microfluidics and Nanofluidics, 27 (1). NA. ISSN 1613-4982

Mazlan, Muhammad Amri and Mohd. Yasin, Mohd. Fairus and Saat, Aminuddin and Abdul Wahid, Mazlan and Ghazali, Ahmad Dairobi and Azeman, Hafizuddin (2023) Wave propagation characteristics in predetonator of rotating detonation engine. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Alkahari, Mohd. Rizal and Tan, Ken Land (2023) Accuracy evaluation of thin wall features fabricated by fused deposition modeling using reinforced composite materials. Progress in Additive Manufacturing, 8 (6). pp. 1357-1366. ISSN 2363-9512

Md. Lias, Mohd. Khairul Hafiz and Abdul Wahid, Mazlan (2023) Advance thermal configuration using computational fluid dynamic in co-firing coal and biomass. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Md. Salleh, Mohd. Fahmi and Abdul Wahid, Mazlan (2023) Indirect evaporative cooling system improvement: A brief review. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Johor, Malaysia.

Md. Salleh, Mohd. Fahmi and Abdul Wahid, Mazlan and Noordin, Noor Hafiz and Abu Kasim, Haszeme and Ariffin, Muhammad Ridzuan (2023) Vortex generator towards sustainable fin-and-tube heat exchanging process. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Md. Yusop, Abdul Hakim and Sarian, Murni Nazira and Januddi, Fatihhi Szali and Nur, Hadi (2023) Drug-device systems based on biodegradable metals for bone applications: Potential, development and challenges. Biocybernetics and Biomedical Engineering, 43 (1). pp. 42-57. ISSN 0208-5216

Mofarrahi, Maryam and Galankashi, Masoud Rahiminezhad and Syed Ahmad Helmi, Syed Ahmad Helmi and Mokhatab Rafiei, Farimah (2023) System dynamics simulation model for inventory optimisation of manufacturers: a case study in electrical industry. European Journal of International Management, 20 (2). pp. 167-193. ISSN 1751-6757

Mohaini, Muhammad Afendi and Mohd. Nor, Nur Safwati and Mohamad, Maziah and Ghazali, Nurzal Effiyana and Saputra, Hendri Maja (2023) IoT-based instrumented bicycle handlebar for children with autism spectrum disorder. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 12-27. ISSN 2289-7895

Mohammad Ghazali, Danial and Mohd. Nor, Nur Safwati and Mohaini, Muhammad Afendi and Saputra, Hendri Maja (2023) Smart IoT based monitoring system for fish breeding. Journal of Advanced Research in Applied Mechanics, 104 (1). pp. 1-11. ISSN 2289-7895

Mohammad Rafix, Nur Alyani Nazirah and Fadil, Nor Akmal and Amrin, Astuty and Bahador, Abdollah and Wan Ali, Wan Fahmin Faiz and Salleh, Suhaimi (2023) The effects of annealing on microstructure and tensile properties of cold drawn steel wire. Malaysian Journal of Microscopy, 19 (1). pp. 226-237. ISSN 1823-7010

Mohammad Zandie, Mohammad Zandie and Ng, Hoon Kiat and Gan, Suyin and Muhamad Said, Mohd. Farid and Cheng, Xinwei (2023) Multi-input multi-output machine learning predictive model for engine performance and stability, emissions, combustion and ignition characteristics of diesel-biodiesel-gasoline blends. Energy, 262 (A). NA-NA. ISSN 0360-5442

Mohammad Zandie, Mohammad Zandie and Ng, Hoon Kiat and Muhamad Said, Mohd. Farid and Cheng, Xinwei and Gan, Suyin (2023) Performance of a compression ignition engine fuelled with diesel-palm biodiesel-gasoline mixtures: CFD and multi parameter optimisation studies. Energy, 274 (NA). NA-NA. ISSN 0360-5442

Mohammadi, Hossein and Ahmad, Zaini and Mazlan, Saiful Amri and Faizal Johari, Mohd. Aidy and Siebert, Geralt and Michal Petru, Michal Petru and Koloor, Seyed Saeid Rahimian (2023) Lightweight glass fiber-reinforced polymer composite for automotive bumper applications: a review. Polymers, 15 (1). pp. 1-30. ISSN 2073-4360

Mohammed, Abdullahi Tanko and Muhamad Said, Mohd. Farid and Othman, Norazila and Opia, Anthony Chukwunonso and Veza, Ibham (2023) Feasibility study of biofuel incorporated nanoparticles as sustainable ic engine fuel: Opportunities and challenges - an overview. Automotive Experiences, 6 (1). pp. 94-121. ISSN 2615-6202

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and Elfaghi, Abdulhafid M. and Khattak, M. A. and Rushdan, Ahmad Ilyas and Salit, Mohd. Sapuan (2023) Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films. Polymers, 15 (1). pp. 1-20. ISSN 2073-4360

Mohd. Yatim, Hanim and Mat Darus, Intan Zaurah and Ab. Talib, Mat Hussin and Bundo, Hamiza and Hadi, Muhamad Sukri and Razali, Nur Afiqah (2023) Bird mating optimizer for modeling of flexible manipulator system. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023, 17 October 2023 - 18 October 2023, Kuala Lumpur, Malaysia.

Mohd. Yatim, Hanim and Mohd. Ghazali, Normah and Mohamad, Maziah and Pamitran, Agus Sunjarianto and Novianto, Sentot (2023) Two-phase heat transfer microchannel system identification with particle swarm optimization (PSO) approach. International Journal Of Air-Conditioning And Refrigeration, 31 (1). pp. 1-12. ISSN 2010-1325

Mohd. Yusof, Ab. Aziz and Isa, Kamariah and Mohd. Szali,, Mohd. Al Fatihhi and Johar, Mahzan and Mahmud, Jamaluddin and Harun, Muhamad Noor (2023) Fracture characteristics of PLA synthetic bone scaffolds with different specimen porosities. Journal of Engineering Science and Technology, 18 (5). pp. 2493-2506. ISSN 1823-4690

Mohd. Yusof, Ab. Aziz and Sharudin, Hazim and Wan Fauzi, Wan Muhammad Syahmi and Harun, Muhamad Noor (2023) Kinematic of body segments, the force growth, and the speed of the rowing. In: 1st International Conference on Innovation and Technology in Sports, ICITS 2022, 14 November 2022 - 15 November 2022, Kuala Lumpur, Malaysia.

Mohd. Yusof, Nurul Hannah and Mohd. Subha, Nurul Adilla and Hamzah, Norikhwan and Ismail, Fatimah Sham and Mohd. Basri, Mohd. Ariffanan and Ahmad, Anita (2023) Controllability analysis of convergence on water distribution system architecture with fault using cellular automata sequence. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Mong, Guo Ren and Chiong, Meng-Choung and Chong, Cheng Tung and Ng, Jo-Han and Syed Mashruk, Syed Mashruk and Tran, Manh-Vu and Lee, Kiat Moon and Samiran, Nor Afzanizam and Wong, Keng Yinn and Agustin, Valera-Medina (2023) Fuel-lean ammonia/biogas combustion characteristics under the reacting swirl flow conditions. Fuel, 331 (NA). NA-NA. ISSN 0016-2361

Moradi, Mahmoud and Beygi, Reza and Mohd. Yusof, Noordin and Amiri, Ali and Da Silva, L. F. M. and Sharif, Safian (2023) 3D printing of acrylonitrile butadiene styrene by fused deposition modeling: artificial neural network and response surface method analyses. Journal of Materials Engineering and Performance, 32 (4). pp. 2016-2028. ISSN 1059-9495

Muhammad Asyraf, Muhammad Rizal and Syamsir, Agusril and Ishak, Mohamad Ridzwan and Mohd. Sapuan, Salit and Mohd. Nurazzi, Norizan and Norrrahim, Mohd. Nor Faiz and Ahmad Ilyas, Rushdan and Khan, Tabrej and Abd. Rashid, Mohamad Zakir (2023) Mechanical properties of hybrid lignocellulosic fiber-reinforced biopolymer green composites: A review. Fibers and Polymers, 24 (2). pp. 337-353. ISSN 1229-9197

Muhammad Qasim, Muhammad Qasim and Wong, Kuan Yew and Mohd. Saufi, Mohd. Syahril Ramadhan (2023) Production planning approaches: a review from green perspective. Environmental Science and Pollution Research, 30 (39). pp. 90024-90049. ISSN 0944-1344

Muhammad Rizal, Muhammad Asyraf and Ishak, Mohamad Ridzwan and Chin, Desmond Daniel Vui Sheng and M. Hasni, A. H. and Abd. Latif, Amir and Abd. Rased, Muhamad Fauzi and Mazlan, Rafidah and Norrrahim, Mohd. Nor Faiz and Razman, Muhammad Rizal and Iskandar, Z. (2023) Conceptual design of a sustainable bionanocomposite bracket for a transmission tower's cross arm using a hybrid concurrent engineering approach. Sustainability (Switzerland), 15 (14). pp. 1-25. ISSN 2071-1050

Muhammad Rizal, Muhammad Asyraf and Mazlan, Rafidah and Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Razman, Muhammad Rizal and Ramli, Zuliskandar and Syed Zakaria, Sharifah Zarina and Khan, Tabrej (2023) Creep properties and analysis of cross arms' materials and structures in latticed transmission towers: current progress and future perspectives. Materials, 16 (4). pp. 1-31. ISSN 1996-1944

Muhammad Yuhendri, Yoga Farhans and Nik Mohd., Nik Ahmad Ridhwan and Mat, Shabudin and Mohd. Nasir, Mohd. Nazri and Othman, Norazila and Mohd. Rafie, Azmin Shakrine and Azami, Muhammad Hanafi (2023) Impact of cowl deflections on scramjet intake aerodynamics with shock-on-lip condition. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 461-468. ISSN 1990-7710

Mujiyono, Mujiyono and Didik Nurhadiyanto, Didik Nurhadiyanto and Mukhammad, Alaya Fadllu Hadi and Tri Widodo Besar Riyadi, Tri Widodo Besar Riyadi and Kristanto Wahyudi, Kristanto Wahyudi and Nur Kholis, Nur Kholis and Asri Peni Wulandari, Asri Peni Wulandari and Abu Hassan, Shukur (2023) Damage formations of ramie fiber composites multilayer armour system under high-velocity impacts. Eastern-European Journal of Enterprise Technologies, 1 (12(121). pp. 16-25. ISSN 1729-3774

Murali, Rishan and Abu Bakar, Shahriman and Mohamad Razlan, Zuradzman and Rojan, Mohd. Afendi and Azizul, A. I. and Rani, Muhammad Faiz Hilmi and Mohd. Jamir, Mohd. Ridzuan and Sunan, Sukport and Ali, M. H. A. and Ramasamy, G. and Hisham, M. H. N. (2023) A study on the significance of exhaust manifold’s bending angle to the brake torque of 115cc SI engine. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 - 5 September 2023, Kuala Lumpur, Malaysia.

Musa, Siti Musliha Aishah and Dzulkifli, Mohd. Haziq and Azmi, Asrul Izam and Ibrahim, Siti Azlida (2023) Embedded and surface-mounted fiber bragg grating as a multiparameter sensor in fiber-reinforced polymer composite materials: a review. IEEE Access, 11 . pp. 86611-86644. ISSN 2169-3536

N

Naeemah, Ali Jaber and Wong, Kuan Yew (2023) Selection methods of lean management tools: a review. International Journal of Productivity and Performance Management, 72 (4). pp. 1077-1110. ISSN 1741-0401

Naeemah, Ali Jaber and Wong, Kuan Yew (2023) A weighted fuzzy approach for choosing lean manufacturing tools based on their effects on sustainability. In: 14th International Conference on Soft Computing and Pattern Recognition, SoCPaR 2022, and the 14th World Congress on Nature and Biologically Inspired Computing, NaBIC 2022, 14 December 2022 - 16 December 2022, Virtual, Seattle, Washington, United States.

Nalcaci, Burak and Baysun, Meltem and Bahador, Abdollah and Umeda, Junko and Münstermann, Sebastian and Kaya, Ali Arslan and Erdogan, Mehmet (2023) Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel. Ironmaking and Steelmaking, 50 (9). pp. 1331-1339. ISSN 0301-9233

Ng, Cheng Yee and Maldar, Nauman Riyaz and Ean, Lee Woen and Wong, Bak Shiiun and Kang, Hooi Siang (2023) A parametric study to enhance the design of Hydrokinetic turbine. In: ASME 2023 42nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2023, 11 June 2023 - 16 June 2023, Melbourne, Australia.

Ng, Lin Feng and Yahya, Mohd. Yazid and Leong, Hui Yi and Parameswaranpillai, Jyotishkumar and Muthukumar, Chandrasekar and Syed Hamzah, Syed Mohd. Saiful Azwan and Malingam, Sivakumar Dhar (2023) State-of-the-art review on developing lightweight fiber-metal laminates based on synthetic/natural fibers. Polymer Composites, 44 (10). pp. 6275-6303. ISSN 0272-8397

Ng, Lin Feng and Yahya, Mohd. Yazid and Muthukumar, Chandrasekar and Woo, Xiu Juan and Muhaimin, Abdul Halim and A. Majid, Rohah (2023) Mechanical characterization of aluminum sandwich structures with woven-ply pineapple leaf/glass fiber-reinforced hybrid composite core. Journal of Natural Fibers, 20 (1). pp. 1-17. ISSN 1544-0478

Ngadiman, Nor Hasrul Akhmal and Mat Saman, Muhamad Zameri (2023) A comprehensive review of biomaterials and its characteristic for bone tissue engineering scaffold. Journal of Medical Devices Technology, 2 (1). pp. 56-62. ISSN 2948-5436

Nur Hanani, Nur Hanani and Shaharuddin, Nik Mohd. Ridzuans and Ali, Arifah and Sunarsih, Sunarsih (2023) Approximation method of the axial forces on network of connectors for modular hexagonal floating structures. In: 7th International Conference on Marine Technology, SENTA 2022, 20 October 2022, Surabaya, Indonesia.

Nyakuma, Bemgba Bevan and Mahyon, Nur Izwanne and Chiong, Meng Soon and Rajoo, Srithar and Pesiridis, Apostolos and Wong, Syie Luing and Martinez-Botas, Ricardo (2023) Recovery and utilisation of waste heat from flue/exhaust gases: a bibliometric analysis (2010–2022). Environmental Science and Pollution Research, 30 (39). pp. 90522-90546. ISSN 0944-1344

O

Ojaomo, Koleola Ebenezer and Samion, Syahrullail and Mohd. Yusop, Mohd. Zamri and Abidin, Ummikalsom and Paiman, Zulhanafi (2023) Effect of Tert-Butylhydroquinone on tribological performance of palm oil lubricant and aluminium plate using linear reciprocating tribometer. Jurnal Tribologi, 39 (NA). pp. 143-156. ISSN 2289-7232

Ojaomo, Koleola Ebenezer and Syahrullail, Samion and Mohd. Zawawi, Fazila and Yusop, Mohd. Zamri (2023) Potential of palm oil with tert-Butylhydroquinone in place of mineral oil lubricant for reducing environmental degradation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1342-1352. ISSN 1350-6501

Olawore, Ayodeji Sulaiman and Wong, Kuan Yew and Ma'aram, Azanizawati and Sutopo, Wahyudi (2023) Prioritization of technology commercialization success factors using fuzzy best worst method. Journal of Open Innovation: Technology, Market, and Complexity, 9 (3). pp. 1-10. ISSN 2199-8531

Opia, Anthony Chukwunonso and Abdollah, Mohd. Fadzli and Abdul Hamid, Mohd. Kameil and Veza, Ibham (2023) A review on bio-lubricants as an alternative green product: tribological performance, mechanism, challenges and future opportunities. Tribology Online, 18 (2). pp. 18-33. ISSN 1881-218X

Opia, Anthony Chukwunonso and Abdollah, Mohd. Fadzli and Johnson, Charles and Samion, Syahrullail and Mohd. Zawawi, Fazila (2023) Lubricity performance evaluation of organic polymer as additives invegetable oil understeel materials. Jordan Journal of Mechanical and Industrial Engineering, 17 (3). pp. 385-391. ISSN 1995-6665

Opia, Anthony Chukwunonso and Abdollah, Mohd. Fadzli and Mamah, Stanley C. and Abdul Hamid, Mohd. Kameil and Syahrullail, Samion and Audu, Ibrahim A. and Johnson, Charles and Basiron, Juliana (2023) Lubricity effectiveness of bio-lubricant modified with multi-wall carbon nanotube and organic polymer. Wear, 528 (NA). NA. ISSN 0043-1648

Opia, Anthony Chukwunonso and Abdollah, Mohd. Fadzli and Mamah, Stanley Chinedu and Abdul Hamid, Mohd. Kameil and Audu, Ibrahim Ali and Johnson, Charles N. and Veza, Ibham and Ahmed, Sule (2023) Tribological performance evaluation of blended lubricants incorporated with organic polymer. Tribology Online, 18 (2). pp. 64-77. ISSN 1881-218X

P

Paiman, Zulhanafi and Syahrullail, Samion and Zaharudin, Nur Faizin (2023) Tribological performance of trimethylolpropane ester bio-lubricant enhanced by graphene oxide nanoparticles and oleic acid as a surfactant. Tribology International, 183 (NA). NA. ISSN 0301-679X

Parimin, Noraziana and Hamzah, Esah and Amrin, Astuty (2023) Isothermal oxidation behavior of Ni-based Fe–Ni–Cr superalloys: role and effect of Nb alloying element. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 - 15 September 2022, Langkawi, Kedah, Malaysia.

Patel, Mohammed Shihab and Liew, Mohd. Shahir and Kang, Hooi Siang and Lee, Kee Quen and Kim, Moo Hyun and Bambole, Abhay (2023) Dynamic roll instability of liquid natural gas carrier during offloading operations and prediction of downtime cost in Malaysian waters. Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, 27 (4). pp. 1027-1039. ISSN 1475-0902

Phong, Wei Loon and Wong, Kuan Yew (2023) Agility assessment in new product development for an electronics manufacturing company. In: 7th International Conference on Quantitative Sciences and its Applications, ICOQSIA 2022, 22 August 2022 - 24 August 2022, Sintok, Malaysia - Virtual, Online.

Pujotomo, Darminto and Syed Hassan, Syed Ahmad Helmi and Ma'aram, Azanizawati and Sutopo, Wahyudi (2023) University–industry collaboration in the technology development and technology commercialization stage: a systematic literature review. Journal of Applied Research in Higher Education, 15 (5). pp. 1276-1306. ISSN 2050-7003

Putra, D. P. and Romli, Romli and Prakoso, Akbar Teguh and Mahendra, N. Y. and Ammarullah, Muhammad Imam and Muhammad Yanis, Muhammad Yanis and Hendri Chandra, Hendri Chandra and Syahrom, Ardiyansyah and Jamari, Jamari and Basri, Hasan (2023) Effect of 3D printing process parameters on flexural strength of mixing PLA and PCL polymer. In: Sriwijaya International Conference on Engineering and Technology 2021, SICETO 2021, 25 October 2021 - 26 October 2021, Palembang, Indonesia - Hybrid.

R

Rafiul Alam, Jubayer Abdullah and Abu Talib, Abd. Rahim and Mohammed Altarazi, Yazan Sofyan and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd., Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 479-483. ISSN 1990-7710

Rahim, Muhammad Roslan and Trisasongko, Annisa Palupi and Ab. Wahid, Mastura and Mohd. Jaafar, Mohammad Nazri and Othman, Norazila and Said, Mazlan and Elham, Puad and Sari@Mohd Ali, Mahanim (2023) Utilization of synthesis gas generated from agricultural waste as clean sustainable fuel. ASEAN Engineering Journal, 13 (2). pp. 159-164. ISSN 2586-9159

Rahman, Mohammad Nurizat and Ujir, Mohd. Haffis and Abdul Wahid, Mazlan and Mohd. Yasin, Mohd. Fairus (2023) A single-step chemistry mechanism for biogas supersonic combustion velocity with nitrogen dilution. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3019-3033. ISSN 1388-6150

Rasep, Zuraidah and Witri Muhammad Yazid, Muhammad Noor Afiq and Samion, Syahrullail and Che Sidik, Nor Azwadi (2023) Investigation on the effect of surface texture depth into the performance of journal bearing using CFD. In: 12th International Meeting on Advances in Thermofluids, IMAT 2021, 1 November 2021, Johor Bahru, Malaysia.

Risky Utama Putra, Risky Utama Putra and Basri, Hasan and Akbar Teguh Prakoso, Akbar Teguh Prakoso and Hendri Chandra, Hendri Chandra and Muhammad Imam Ammarullah, Muhammad Imam Ammarullah and Imam Akbar, Imam Akbar and Syahrom, Ardiyansyah and Tunku Kamarul, Tunku Kamarul (2023) Level of activity changes increases the fatigue life of the porous magnesium scaffold, as observed in dynamic immersion tests, over time. Sustainability (Switzerland), 15 (1). pp. 1-13. ISSN 2071-1050

Roslan, Muhammad Faizullizam and Veza, Ibham and Muhamad Said, Mohd. Farid (2023) Effects of injection parameters and intake air temperature on acetone-butanol-ethanol (ABE) blend HCCI-DI engine. Fuel, 345 (NA). NA-NA. ISSN 0016-2361

S

Syamsir, Agusril and Ean, Lee Woen and Muhammad Rizal, Muhammad Asyraf and Mohd. Supian, Abu Bakar and Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun (2023) Recent advances of GFRP composite cross arms in energy transmission tower: a short review on design improvements and mechanical properties. Materials, 16 (7). pp. 1-21. ISSN 1996-1944

Sadiq, Taoheed Olohunde and Sudin, Izman and Sudin, xAhmed and Idris, Jamaliah and Fadil, Nor Akmal (2023) Effect of homogenization heat treatment on the microstructure of AZ91 magnesium alloy at different temperatures and ageing times. Journal of Engineering Research (Kuwait), 11 (3). pp. 212-218. ISSN 2307-1877

Sadeghian, Hadi and Ayatollahi, Majid R. and Yahya, Mohd. Yazid (2023) Effects of copper additives on load carrying capacity and micro mechanisms of fracture in 3D-printed PLA specimens. Theoretical and Applied Fracture Mechanics, 127 (NA). NA. ISSN 0167-8442

Sadiq, Taoheed Olohunde and Sudin, Izman and Alsakkaf, Ahmed and Idris, Jamaliah and Fadil, Nor Akmal (2023) Electrophoretic deposition of nanohydroxyapatite on homogenized magnesium-based alloy for biomedical applications. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 61 (NA). pp. 15-41. ISSN 2296-9837

Sadiq, Taoheed Olohunde and Sudin, Izman and Idris, Jamaliah and Fadil, Nor Akmal (2023) Synthesis techniques of bioceramic hydroxyapatite for biomedical. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 59 (NA). pp. 59-80. ISSN 2296-9837

Sahhouk, Masoud A. and J. A., Aziz and Ardani, M. I. (2023) State of charge estimation of second life batteries using first order Thevenin model. In: 2023 IEEE Conference on Energy Conversion (CENCON), 23 October 2023-24 October 2023, Kuching, Malaysia.

Saif, Yazid and Yusof, Yusri and M. Rus, Anika Zafiah and Ghaleb, Atef M. and Mejjaouli, Sobhi and Al-Alimi, Sami and Didane, Djamal Hissein and Latif, Kamran and Abdul Kadir, Aini Zuhra and Alshalabi, Hamood and Sadeq, Safwan (2023) Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study. PLoS ONE, 18 (10). pp. 1-25. ISSN 1932-6203

Sanada, Stanferd Jenta and Mat, Mohamad Nur Hidayat (2023) Effect of indoor condition with cross ventilation on deposition of airborne droplets emitted from human cough. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (1). pp. 184-202. ISSN 2289-7879

Sanada, Stanferd Jenta and Mat, Mohamad Nur Hidayat and Wong, Ken Yinn and Rosminahar, Siti Najiah (2023) Minimizing pathogen transmission through indoor environment optimization using central composite design of experiment. Energy and Buildings, 298 (NA). NA-NA. ISSN 0378-7788

Sarmin, Siti Noorbaini and Jawaid, Mohammad and Zaki, Sheikh Ahmad and Ali, Mohd. Radzi and Fouad, Hassan and Khiari, Ramzi and Sri Rahayu, Sri Rahayu and Salim, Nurjannah (2023) The effect of eggshell fillers on the physical, mechanical, and morphological properties of date palm fibre reinforced bio-epoxy composites. Journal of Polymers and the Environment, 31 (11). pp. 5015-5027. ISSN 1566-2543

Saufi, Syahril Ramadhan and Isham, Muhammad Firdaus and Ahmad, Zair Asrar and Abu Hasan, M. Danial (2023) Machinery fault diagnosis based on a modified hybrid deep sparse autoencoder using a raw vibration time-series signal. Journal of Ambient Intelligence and Humanized Computing, 14 (4). pp. 3827-3838. ISSN 1868-5137

Sekar, Vignesh and Palaniyappan, Sabarinathan and Eh Noum, Se Yong and Putra, Azma and Sivanesan, Sivakumar and Chin, Desmond Daniel Vui Sheng (2023) Acoustic absorbers made of wood fiber composites developed by compression molding and additive manufacturing. Wood Research, 68 (1). pp. 68-82. ISSN 1336-4561

Selamat, Muhammad Syafiq Ridhwan and Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd Fairus and Hamzah, Norikhwan and Che Sidik, Nor Azwadi (2023) Modelling of the flame synthesis of single-walled carbon nanotubes in non-premixed flames with aerosol catalyst. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 39-51. ISSN 2735-0142

Setiawan, Yosua (2023) Simulation of performance and optimization for diesel engine fueled with higher biodiesel blend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Shaari, Aida Nur Syafiqah and Hadi, Muhamad Sukri and Abdul Wahab, Abdul Malek and Eek, Rickey Ting Pek and Mat Darus, Intan Zaurah (2023) Active vibration control of flexible beam system based on cuckoo search algorithm. International Journal of Electrical and Computer Engineering, 13 (2). pp. 2289-2298. ISSN 2088-8708

Shafyra, Sabri and Engku Abu Bakar, Engku Mohammad Nazim and Ngadiman, Nor Hasrul Akhmal and Sudin, Izman (2023) Comparative study on the microstructure and biodegradation behavior of commercialized pure Mg and Mg-1.0Ca-0.5Sr alloy in 27 mM HCO3−-SBF: the influence of the pH regulation treatments. Metals, 13 (1). pp. 1-21. ISSN 2075-4701

Shafyra, Sabri and Engku Mohammad Nazim, Engku Mohammad Nazim and Ngadiman, Nor Hasrul Akhmal and Sudin, Izman (2023) Comparative study on the microstructure and biodegradation behavior of commercialized pure Mg and Mg-1.0Ca-0.5Sr Alloy in 27 mM HCO3--SBF: The influence of the pH regulation treatments. Metals, 13 (1). pp. 1-21. ISSN 2075-4701

Shahrin, Muhammad Shahrul Nizam and Othman, Norazila and Nik Mohd., Nik Ahmad Ridhwan and Wahid, Mastura A. (2023) Effect of porosity and permeability characteristics on the silver catalyst of the hydrogen peroxide monopropellant thruster performances. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Pekan, Pahang, Malaysia - Virtual, Online.

Shakil, Usaid Ahmed and Mat Rejab, Mohd. Ruzaimi and Sazali, Norazlianie and Abu Hassa, Shukur and Yahya, Mohd. Yazid and Ma, Quanjin (2023) Damage characterisation of amine-functionalized MWCNT reinforced carbon/epoxy composites under indentation loading. Journal of Materials Research and Technology, 24 (NA). pp. 6713-6729. ISSN 2238-7854

Shi, Yang and Jiang, Jinxuan and Ye, Haoran and Sheng, Yequan and Zhou, Yihui and Foong, Shin Ying and Sonne, Christian and Chong, William Woei Fong and Lam, Su Shiung and Xie, Yanfei and Li, Jianzhang and Ge, Shengbo (2023) Transforming municipal cotton waste into a multilayer fibre biocomposite with high strength. Environmental Research, 218 (NA). NA-NA. ISSN 0013-9351

Siek, H. C. and Abd. Kader, Ab. Saman and Siow, Chee Loon (2023) Grid independence study of low speed catamaran operate in shallow water. In: 1st International Postgraduate Conference on Ocean Engineering Technology and Informatics 2021, IPCOETI 2021, 21 June 2021 - 22 June 2021, Virtual, Kuala Terengganu, Terengganu, Malaysia.

Sri Selvam, Dharsannen and Abdul Rahim, Norwazan and Saad, Mohd. Rashdan and Syawal, Syahar and Mohd. Faizal, Hasan and Abdul Rahman, Mohd. Rosdzimin (2023) Numerical simulation of a modified trapped vortex combustor. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3129-3135. ISSN 1388-6150

Suhariningsih, Suhariningsih and Suryani Dyah Astuti, Suryani Dyah Astuti and Herdiani Nur Kusumawati, Herdiani Nur Kusumawati and Mahmud, Amalia Fitriana and Maya Septriana, Maya Septriana and Lale Rozykulyyeva, Lale Rozykulyyeva and Yunus Susilo, Yunus Susilo and Syahrom, Ardiansyah (2023) Effect of 650 nm laser photobiomodulation therapy on the HT-7 (shenmen) acupoint in the Mus musculus model of Parkinson's disease. Heliyon, 9 (4). pp. 1-8. ISSN 2405-8440

Sule, Ahmed and Abdul Latiff, Zulkarnain and Abas, Mohd. Azman and Veza, Ibham and Soudagar, Manzoore Elahi M. and Irianto Harny, Irianto Harny and Epin, Vorathin (2023) Dual effects of N-butanol and magnetite nanoparticle to biodiesel-diesel fuel blends as additives on emission pattern and performance of a diesel engine with ANN validation. Sustainability (Switzerland), 15 (2). pp. 1-22. ISSN 2071-1050

Sule, Ahmed and Abdul Latiff, Zulkarnain and Abbas, Mohammed Azman and Veza, Ibham (2023) Particulate matter and nitrogen oxide emissions prediction using artificial neural network for diesel engine running on biodiesel-diesel fuel with nano-additive. In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021-21 December 2021, Surakarta, Indonesia.

Sunarsih, Sunarsih and Jadmiko, Edi and Zaman, Muhammad Badrus and Abdul Malik, Adi Maimun and Ali, Arifah (2023) Enhancing a reliable ship performance evaluation in dynamic maneuvering conditions-a gap analysis. International Journal of Technology, 14 (3). pp. 561-575. ISSN 2086-9614

Suruji, Muhammad Aiman Wafi and Nik Mohd., Nik Ahmad Ridhwan and Nasir, Nazri and Wahinuddin, Muhammad Ajwad and Othman, Norazila and Mat, Shabudin (2023) Thermodynamics analysis of solar-ejector pump OTEC (SEP-OTEC) rankine cycle using ammonia as refrigerant. Jurnal Mekanikal, 46 (NA). pp. 1-13. ISSN 2289-3873

Suryani Dyah Astuti, Suryani Dyah Astuti and Amalia Rizky Febriastri, Amalia Rizky Febriastri and Akhmad Taufiq Mukti, Akhmad Taufiq Mukti and Yaqubi, Ahmad Khalil and Yunus Susilo, Yunus Susilo and Syahrom, Ardiansyah (2023) Photobiomodulation effect of infra-red laser on the level of gonad maturity in the Simese Catfish (Pangasianodon hypophthalmus). Heliyon, 9 (12). pp. 1-11. ISSN 2405-8440

Suryani Dyah Astuti, Suryani Dyah Astuti and Wahyu Intan Pertiwi, Wahyu Intan Pertiwi and Sri Puji Astuti Wahyuningsih, Sri Puji Astuti Wahyuningsih and Perwira Annissa Dyah Permatasari, Perwira Annissa Dyah Permatasari and Dezy Zahrotul Istiqomah Nurdin, Dezy Zahrotul Istiqomah Nurdin and Syahrom, Ardiansyah (2023) Effectiveness of ozone-laser photodynamic combination therapy for healing wounds infected with methicillin-resistant Staphylococcus aureus in mice. Veterinary World, 16 (5). pp. 1176-1184. ISSN 0972-8988

Suryani Dyah Astuti, Suryani Dyah Astuti and Yunus Susilo, Yunus Susilo and Ahmad Khalil Yaqubi, Ahmad Khalil Yaqubi and Tri Wahyuni, Tri Wahyuni and Miratul Khasanah, Miratul Khasanah and Syahrom, Ardiyansyah (2023) The effect of ozone exposure to extend the shelf life of carrots (Daucus Carrota L.) against vitamin C levels and hardness. Jurnal Teknologi, 85 (6). pp. 105-110. ISSN 0127-9696

Syed Hussain, Haja and Mohd. Jamir, Mohd. Ridzuan and Abdul Majid, Mohd. Shukry and Salit, Mohd. Sapuan and Ferriawan Yudhanto, Ferriawan Yudhanto and Aris Widyo Nugroho, Aris Widyo Nugroho and Rani, Muhammad Faiz Hilmi (2023) Friction and wear characteristics of Furcraea foetida fiber-reinforced epoxy composites. Polymer Composites, 44 (12). pp. 8559-8577. ISSN 0272-8397

T

Taharuddin, Nurul Hanan and Jumaidin, Ridhwan and Mansor, Muhd. Ridzuan and Kamaruddin, Zatil Hazrati and Jamal, Tarique and Muhammad Rizal, Muhammad Asyraf and Razman, Muhammad Rizal (2023) Unlocking the potential of lignocellulosic biomass dragon fruit (Hylocereus polyrhizus) in bioplastics, biocomposites and various commercial applications. Polymers, 15 (12). pp. 1-17. ISSN 2073-4360

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2023) Proposed methodology for sustainability assessment using MCDA-AHP: Future study and recommendation in 3D printing technology. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021-26 August 2021, Virtual, Online, Parit Raja, Johor, Malaysia.

Takeyeldein, Mohamed M. and Ishak, I. S. and Lazim, Tholudin M. (2023) The effect of the number of the blades on diffuser augmented wind turbine performance. Journal of Engineering Science and Technology, 18 (2). pp. 1019-1037. ISSN 1823-4690

Tan, Huiyi and Lee, Chew Tin and Othman, Mohd. Hafiz Dzarfan and Zubir, Muhammad Afiq and Nyakuma, Bemgba Bevan and Chong, Wen Tong and Fan, Yee Van and Wong, Keng Yinn (2023) Evaluation of microbial contamination for pre- and post-surgical procedures in hospital operating rooms: A systematic onsite sampling. Chemical Engineering Transactions, 106 (NA). pp. 601-606. ISSN 2283-9216

Tan, Huiyi and Wong, Keng Yinn and Lee, Chew Tin and Wong, Syie Luing and Nyakuma, Bemgba Bevan and Abdul Wahab, Roswanira and Lee, Kee Quen and Chiong, Meng Choung and Ho, Wai Shin and Othman, Mohd. Hafiz Dzarfan and Yau, Yat Huang and Kek, Hong Yee and Mohamed Kamar, Haslinda (2023) Numerical assessment of ceiling-mounted air curtain on the particle distribution in surgical zone. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3005-3018. ISSN 1388-6150

Tan, Huiyi and Wong, Keng Yinn and Othman, Mohd. Hafiz Dzarfan and Kek, Hong Yee and Nyakuma, Bemgba Bevan and Ho, Wai Shin and Hashim, Haslenda and Abdul Wahab, Roswanira and Chin, Desmond Daniel Vui Sheng and Abdul Wahab, Nur Haliza and Yatim, Ardiyansyah Saad (2023) Why Do Ventilation Strategies Matter In Controlling Infectious Airborne particles? A comprehensive numerical analysis in isolation ward. Building and Environment, 231 (NA). NA-NA. ISSN 0360-1323

Tan, Huiyi and Wong, Keng Yinn and Othman, Mohd. Hafiz Dzarfan and Nyakuma, Bemgba Bevan and Vui Sheng, Desmond Daniel Chin and Kek, Hong Yee and Ho, Wai Shin and Hashim, Haslenda and Chiong, Meng Choung and Zubir, Muhammad Afiq and Abdul Wahab, Nur Haliza and Wong, Syie Luing and Abdul Wahab, Roswanira and Hatif, Ihab Hasan (2023) Does human movement-induced airflow elevate infection risk in burn patient's isolation ward? A validated dynamics numerical simulation approach. Energy and Buildings, 283 (NA). NA-NA. ISSN 0378-7788

Tan, Shimeng and Zhou, Guoying and Yang, Quan and Ge, Shengbo and Liu, Junang and Cheng, Yoke Wang and Yek, Peter Nai Yuh and Wan Mahari, Wan Adibah and Kong, Sieng Huat and Chang, Jo Shu and Sonne, Christian and Chong, William Woei Fong and Lam, Su Shiung (2023) Utilization of current pyrolysis technology to convert biomass and manure waste into biochar for soil remediation: a review. Science of the Total Environment, 864 (NA). NA. ISSN 0048-9697

Tao, Hai and Aldlemy, Mohammed Suleman and Alawi, Omer A. and Mohamed Kamar, Haslinda and Homod, Raad Z. and Mohammed, Hussein A. and Mohammed, Mustafa K. A. and Mallah, Abdul Rahman and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2023) Energy and cost management of different mixing ratios and morphologies on mono and hybrid nanofluids in collector technologies. Engineering Applications of Computational Fluid Mechanics, 17 (1). pp. 1-19. ISSN 1994-2060

Ten, Ki Hong and Kang, Hooi Siang and Siow, Chee Loon and Goh, Pei Sean and Lee, Kee Quen and Huspi, Sharin Hazlin and Soares, Guedes (2023) Automatic identification system in accelerating decarbonization of maritime transportation: the state-of-the-art and opportunities. Ocean Engineering, 289 (NA). NA. ISSN 0029-8018

Teo, Jue Hao and Yong, J. C. E. and Muhieldeen, Mohammed W. and Chan, J. Y. and Olasunkanmi, A. G. and Siow, C. L. (2023) Simulated performance of an improved district cooling system (DCS) in Tronoh, Perak, Malaysia. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

V

Velusamy, Venod Reddy and Foong, Faruq Muhammad and Nik Mohd., Nik Ahmad Ridhwan and Thein, Chung Ket (2023) Parametric optimisation of a dual cantilever flutter for electromagnetic wind energy harvesting. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7 June 2023 - 8 June 2023, Hybrid, Penang, Malaysia.

Veza, Ibham and Ling, Chee Huat and Abas, Mohd. Azman and Muhammad Idris, Muhammad Idris and Spraggon, Martin and Safarudin G. Herawan, Safarudin G. Herawan (2023) Effects of pre-turbocharger turbine water injection on the sustainable performance of spark ignition engine. Sustainability (Switzerland), 15 (5). pp. 1-36. ISSN 2071-1050

Veza, Ibham and Tuan Hoang Anh Irianto, Tuan Hoang Anh Irianto and A. Yusuf, Abdulfatah and Herawan, Safarudin G. and Soudagar, M. E. M. and Samuel, Olusegun D. and Said, M. F. M. and Silitonga, Arridina S. (2023) Effects of Acetone-Butanol-Ethanol (ABE) addition on HCCI-DI engine performance, combustion and emission. Fuel, 333 (NA). NA-NA. ISSN 0016-2361

W

Wahinuddin, Muhammad Ajwad and Mohd. Nasir, Mohd. Nazri and Nik Mohd., Nik Ahmad Ridhwan and Othman, Norazila and Mat, Shabudin and Thirugana, Sathiabama T. (2023) OTEC performance evaluation using different working fluids and variations in operating ORC conditions. Jurnal Mekanikal, 46 (NA). pp. 14-26. ISSN 2289-3873

Wan Zainus, Wan Mohd. Fakhri and Kamaruzaman, Natrah (2023) Boiler efficiency analysis using direct and indirect method. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Wang, Xiaohui and Xu, Li and Ge, Shengbo and Foong, Shin Ying and Liew, Rock Keey and Chong, William Woei Fong and Verma, Meenakshi and Naushad, Mu and Park, Young-Kwon and Lam, Su Shiung and Li, Qian and Huang, Runzhou (2023) Biomass-based carbon quantum dots for polycrystalline silicon solar cells with enhanced photovoltaic performance. Energy, 274 (NA). NA-NA. ISSN 0360-5442

Wei, Zhongbin and Kulandaivel, Arul and Tino Hermanto, Tino Hermanto and Vignesh, R. Vaira and Mehrez, Sadok and Paidar, Moslem and Mohd. Zain, Azlan and Mohanavel, V. (2023) An investigation on mechanical and wear behavior of friction-stir-processed hybrid AZ80/CeO2 + BN surface composite. Materials Letters, 346 (NA). NA. ISSN 0167-577X

Wong, King Jye and Chong, William Woei Fong and Goh, Kheng Lim (2023) Fiber bridging mechanism in moisture-induced mode I delamination in carbon/epoxy composites: finite element analysis and experimental investigation. Polymer Composites, 44 (2). pp. 1392-1407. ISSN 0272-8397

Wong, Sien Jie and Abu Bakar, Saiful Anuar (2023) Dynamic loading effect on car suspension components during road driving. Journal of Transport System Engineering, 10 (2). pp. 27-36. ISSN 2289–9790

Y

Yahaya, Aiman and Samion, Syahrullail and Abdul Hamid, Mohd. Kameil (2023) Surface modification effect of aluminium block on the tribological performance for super olein. Industrial Lubrication and Tribology, 75 (9). pp. 993-1001. ISSN 0036-8792

Yahaya, Aiman and Samion, Syahrullail and Abidin, Ummikalsom and Abdul Hamid, Mohd. Kameil (2023) Different behaviors of friction in open and closed forging test utilizing palm oil-based lubricants. Lubricants, 11 (3). pp. 1-19. ISSN 2075-4442

Yahaya, Aiman and Samion, Syahrullail and Abidin, Ummikalsom and Nor Musa, Nor Musa and Hamid, Kameil (2023) Modelling the tribological performance of palm mid olein in cold forging test using deform-3D. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1372-1383. ISSN 1350-6501

Yang, Yang and Zhang, Zhongfeng and Zhang, Lei and Song, Feifei and Ren, Yi and Zhang, Xu and Zhang, Jijuan and Liew, Rock Keey and Foong, Shin Ying and Chong, William Woei Fong and Lam, Su Shiung and Verma, Meenakshi and Ng, Hui Suan and Sonne, Christian and Ge, Shengbo (2023) Recent advances in the control of volatile organic compounds emissions from indoor wood-based panels: a comprehensive review. Science of the Total Environment, 884 (NA). NA. ISSN 0048-9697

Yanis, M. and Budiman, A. Y. and Mohruni, A. S. and Sharif, S. and Suhaimi, M. A. and Dwipayana, H. (2023) Levenberg-Marquardt, Bayesian-regularization, and scaled conjugate gradient algorithms for predicting surface roughness accuracy on side milling AISI 1045. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14 July 202115 July 2021, Virtual, Online, Perlis, Malaysia.

Yap, Suk Wy and Johari, Norhasnidawani and Mazlan, Saiful Amri and Syed Ahmad, Syarifah Nur Aqida and Arifin, Rizal and Hassan, Noor Azlina and Johari, Mohd. Aidy Faizal (2023) Superhydrophobic zinc oxide/epoxy coating prepared by a one-step approach for corrosion protection of carbon steel. Journal of Materials Research and Technology, 25 (NA). pp. 5751-5766. ISSN 2238-7854

Yasukawa, Hironori and Okuda, Ryusuke and Hasnan, Muhammed Amirul Asyraf and Nakayama, Yoshiyuki and Matsuda, Akihiko (2023) 6-DOF motion simulations of a deadship drifting in wind and waves. Ocean Engineering, 275 (NA). NA. ISSN 0029-8018

Yosua Setiawan, Yosua Setiawan and Muhamad Said, M. F. (2023) Simulation study on the effect of injection pressure on single cylinder diesel engine fuelled with biodiesel blend. In: 2022 International Conference on Sustainable Engineering and Advanced Technology, ICSEAT 2022, 16 June 2022-17 June 2022, Kota Damansara, Selangor, Malaysia.

Yuan, Chan Jin and Ee, Jonathan Yong Chung and Hong, Wan Siu and Loon, Siow Chee (2023) Development of anti-siphoning model by automatic identification system for marine security. In: 2nd International Conference on Materials, Design and Manufacturing for Sustainable Environment, ICMDMSE 2022, 11 March 2022 - 12 March 2022, Coimbatore, India.

Yudyanto, Yudyanto and Utomo, J. and Rahmawati, A. and Ariyanto, L. P. and Rahim, L. F. and Ahmad, Norhayati and Hartatiek, Hartatiek (2023) Properties of hydroxyapatite/PEG nanocomposites synthesized by precipitation time variations. In: 2nd International Conference on Condensed Matters and Advanced Materials, IC2MAM 2020, 27 October 2020, Virtual, Online, Malang, Indonesia.

Yunus, Azrul Aminur Rahman and Abd. Malik, Adi Maimun and Jamal, Mohammad Hidayat and Muhamat Yain, Nursahliza (2023) Hybrid current turbine and solar cell renewable energy device. In: 5th International Conference on Water Resources, ICWR 2021, 23 November 2021 - 25 November 2021, Virtual, UTM Johor Bahru, Johor, Malaysia.

Yusof, Nur Liyana Nabihah and Shamsuddin, Hielfarith Suffri and Estelle, Patrice and Mohd. Ghazali, Normah (2023) Optimization of a boron nitride nanotubes nanofluid-cooled microchannel heat sink at different concentrations. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3117-3127. ISSN 1388-6150

Z

Zainal, Muhammad Thalhah and Hamzah, Norikhwan and Abdul Wahid, Mazlan and Kamaruzaman, Natrah and Chong, Cheng Tung and Ani, Mohd. Hanafi and Amzin, Shokri and Das, Tarit and Mohd. Yasin, Mohd. Fairus (2023) Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment. Carbon Letters, 33 (7). pp. 2199-2210. ISSN 1976-4251

Zainol, Ismail and Loon, Siow Chee and Zoolfakar, Md. Redzuan and Ahmad Fuad, Ahmad Faizal and Ismail, Nuraihan and Rosli, Khairunnisa (2023) Integrating ship recycling facility into existing shipyard: a study of Malaysian shipyard. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 217-227. ISSN 2462-1943

Zangina, Umar and Buyamin, Salinda and Mahmud, Mohd. Saiful Azimi and Zimit, Aminu Yahaya and Abidin, Mohamad Shukri Zainal (2023) Multi-objective pathfinding for autonomous robot in agriculture. International Journal of Industrial Engineering : Theory Applications and Practice, 30 (3). pp. 671-687. ISSN 1072-4761

Zhang, Lele and Zhang, Cheng and Tian, Guangdong and Chen, Zhaofang and Fathollahi-Fard, Amir M. and Zhao, Xian-Gang and Wong, Kuan Yew (2023) A multi-criteria group-based decision-making method considering linguistic neutrosophic clouds. Expert Systems with Applications, 226 (NA). NA-NA. ISSN 0957-4174

Zhao, Jihua and Ma, Hongzhi and Wu, Wenyu and Bacar, Mohammed Ali and Wang, Qunhui and Gao, Ming and Wu, Chuanfu and Xia, Changlei and Qian, Dayi and Chong, William Woei Fong and Lam, Su Shiung (2023) Product spectrum analysis and microbial insights of medium-chain fatty acids production from waste biomass during liquor fermentation process: Effects of substrate concentrations and fermentation modes. Bioresource Technology, 368 (NA). NA-NA. ISSN 0960-8524

Zhao, Yixin and Cai, Baoping and Kang, Henry Hooi Siang and Liu, Yiliu (2023) Cascading failure analysis of multistate loading dependent systems with application in an overloading piping network. Reliability Engineering and System Safety, 231 (NA). pp. 1-12. ISSN 0951-8320

Zimit, Aminu Yahaya and Jibril, Mahmud M. and Azimi, M. S. and Abba, Sani Isah (2023) Hybrid predictive based control of precipitation in a water-scarce region: a focus on the application of intelligent learning for green irrigation in agriculture sector. Journal of the Saudi Society of Agricultural Sciences, 22 (8). pp. 524-534. ISSN 1658-077X