Items where Year is 2017
Number of items at this level: 182. AAbang Hasbollah, Dayang Zulaika (2017) Evaluation and classification of potential sedimentary basins in Malaysia for carbon dioxide storage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Abang Hasbollah, Dayang Zulaika and Junin, Radzuan (2017) Assessment of geological CO2 storage potential in central Luconia province. International Journal of Advanced And Applied Sciences (IJAAS), 4 (2). pp. 44-48. ISSN 2313-3724 Abbas, A. H. and Jaafar, M. Z. and Ismail, A. R. and Sulaiman, W. R. W. (2017) Adsorption of aerosol-OT on sand and shale at high sodium salt concentration. Chemical Engineering Transactions, 56 . pp. 151-156. ISSN 2283-9216 Abbaszadeh, Sahar (2017) Adsorption of lead (ii) from aqueous solution using nano-papaya peel. PhD thesis, Universiti Teknologi Malaysia. Abdul Aziz, E. and Wan Alwi, S. R. and Lim, J. S. and Abdul Manan, Z. and Klemeš, J. J. (2017) An integrated Pinch Analysis framework for low CO2 emissions industrial site planning. Journal of Cleaner Production, 146 . pp. 125-138. ISSN 0959-6526 Abdul Fatah, Nor Aiza (2017) n-Heptane isomerization over platinum and phosphorus supported on modified molybdenum oxide-mesoporous silica. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Abdul Majid, Zulkifli (2017) Integrity assessment of buried pipe in erosive environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Abdul Manan, Zainuddin and Mohd. Nawi, Wan Norlinda Roshana and Wan Alwi, Sharifah Rafidah and Klemes, Jirí Jaromír (2017) Advances in Process Integration research for CO2 emission reduction – A review. Journal of Cleaner Production, 167 . pp. 1-13. ISSN 0959-6526 Abdulhameed, Mohammed Abdulmunem (2017) Development of superhydrophobic ceramic hollow fibre membrances from Malaysian koalin for efficient carbon dioxide capture in membrance contactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Abdulhameed, Mohammed Abdulmunem (2017) Development of superhydrophobic ceramic hollow fibre membranes from Malaysian kaolin for efficient carbon dioxide capture in membrane contactor. PhD thesis, Universiti Teknologi Malaysia. Abdullah, Norhanisah (2017) Elastase and inflammation inhibitory from Labisia pumila. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering. Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2017) The Effect of PCA-g-MWCNTs loading on the performance of PES/MWCNTs hemodialysis membrane. Chemical Engineering Transactions, 56 . pp. 1609-1614. ISSN 2283-9216 Adekoya, D. O. and Tahir, M. and Amin, N. A. S. (2017) g-C3N4/(Cu/TiO2) nanocomposite for enhanced photoreduction of CO2 to CH3OH and HCOOH under UV/visible light. Journal of CO2 Utilization, 18 . pp. 261-274. ISSN 2212-9820 Aftab, A. and Ismail, A. R. and Ibupoto, Z. H. and Akeiber,, H. and Malghani, M. G. K. (2017) Nanoparticles based drilling muds a solution to drill elevated temperature wells: A review. Renewable and Sustainable Energy Reviews, 76 . pp. 1301-1313. ISSN 1364-0321 Ahmad, Syaza Izyanni (2017) Inherent safety assessment framework for process design using numerical and graphical techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Al-Fakih, Abdo Mohammed Ali (2017) Experimental and computational studies of furan derivatives in corrosion inhibition of mild steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering. Alam, M. N. H. Z. and Hossain, F. and Vale, A. and Kouzani, A. (2017) Design and fabrication of a 3D printed miniature pump for integrated microfluidic applications. International Journal of Precision Engineering and Manufacturing, 18 (9). pp. 1287-1296. ISSN 2234-7593 Ali, A. and Maimun, A. and Ahmed, Y. M. and Rahimuddin, Rahimuddin (2017) Resistance analysis of a semi-SWATH design concept in shallow water. Journal of Marine Science and Application, 16 (2). pp. 182-189. ISSN 1671-9433 Alias, Hajar and Che Ani, Muhamad Fahmi and Sa’ad, Siti Fatimah and Ngadi, Norzita (2017) Heat transfer of alumina-deionized water nanofluids in concentric tube heat exchanger. In: 3rd Advanced Materials Conference 2016, AMC 2016, 28 - 29 November 2016, Langkawi Island, Kedah. Alizadeh, Mostafa (2017) Prediction of fracture dip using artificial neural networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Amran, U. I. and Ahmad, A. and Othman, M. R. (2017) Kinetic based simulation of methane steam reforming and water gas shift for hydrogen production using aspen plus. Chemical Engineering Transactions, 56 . pp. 1681-1686. ISSN 2283-9216 Ansari, Abeera A. and Khoja, Asif Hussain and Nawar, Azra and Qayyum, Muneeb and Ali, Ehsan (2017) Wastewater treatment by local microalgae strains for CO2 sequestration and biofuel production. APPLIED WATER SCIENCE, 7 (7). pp. 4151-4158. Anuar, E. and Saufi, S. M. and Seman, M. N. A. and Yussof, H. W. and Ismailb, A. F. (2017) Thin film composite hollow fiber membrane for separation in biorefinery. Chemical Engineering Transactions, 56 . pp. 1099-1104. ISSN 2283-9216 Arjmandi, R. and Suib, N. and Hassan, A. and Muhamad, I. I. and Pa'a, N. and Zakaria, Z. (2017) Tensile and morphological properties of bacterial cellulose nanowhiskers reinforced polylactic acid nanocomposites. Chemical Engineering Transactions, 56 . pp. 1327-1332. ISSN 2283-9216 Arsad, Nur Husnina and Che Yunus, Mohd. Azizi and Idham, Zuhaili (2017) Optimization and effect of supercritical carbon dioxide extraction conditions on global oil yield and eugenol from piper betle leaves. Malaysian Journal of Fundamental and Applied Sciences, 13 (4). pp. 680-684. ISSN 2289-5981 Asli, U. A. and Sadikin, A. N. and Le, C. D. (2017) A study on the impact of international academic visit exchange programme among chemical engineering students. Chemical Engineering Transactions, 56 . pp. 1093-1098. ISSN 2283-9216 Awal, Md. Rabiul and Jusoh, Muzammil and A. Rahim, Hasliza and Sabapathy, Thennarasan and Osman, Mohamed Nasrun and Jais, Mohd. Ilman and Kamarudin, Muhammad Ramlee (2017) A multilayered acoustic signal generator for low power energy harvesting. In: 13th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2017, 10 - 12 March 2017, Penang, Malaysia. BBee, Soo Tueen and Lee, Tin Sin and Khor, Su Luang (2017) Enhancement of mechanical and thermal properties of (Poly[vinyl alcohol])-Dialdehyde starch composites via the incorporation of montmorillonite nanofillers. Society of Plastics Engineers, 23 (1). pp. 128-141. Bakar, S. H. A. and Abd. Hamid, Mohd. K. and Alwi, S. R. W. and Manan, Z. A. (2017) Sensitivity analysis of industrial heat exchanger network design. Chemical Engineering Transactions, 56 . pp. 1489-1494. ISSN 2283-9216 Balasundram, V. and Ibrahim, N. and Kasmani, R. M. and Hamid, M. K. A. and Isha, R. and Hasbullah, H. and Ali, R. R. (2017) Thermogravimetric catalytic pyrolysis and kinetic studies of coconut copra and rice husk for possible maximum production of pyrolysis oil. Journal of Cleaner Production, 167 . pp. 218-228. ISSN 0959-6526 Balasundram, V. and Ibrahim, N. and Samsudin, M. D. H. and Kasmani, R. Md. and Hamid, Mohd. K. A. and Isha, R. and Hasbullah, H. (2017) Thermogravimetric studies on the catalytic Pyrolysis of rice husk. Chemical Engineering Transactions, 56 . pp. 427-432. ISSN 2283-9216 Basri, Hatijah and Irfan, Masooma and Irfan, Muhammad and Lau, Woei-Jye and Kartohardjono, Sutrasno (2017) Quantitative analysis of MWCNT agglomeration in polymeric-based membranes using atomic force microscope. Surface and Interface Analysis, 49 (1). pp. 55-62. ISSN 0142-2421 Bong, C. P. C. and Goh, R. K. Y. and Lim, J. S. and Ho, W. S. and Lee, C. T. and Hashim, H. and Abu Mansor, N. N. and Ho, C. S. and Ramli, A. R. and Takeshi, F. (2017) Towards low carbon society in Iskandar Malaysia: Implementation and feasibility of community organic waste composting. Journal of Environmental Management, 203 . pp. 679-687. ISSN 0301-4797 Bong, C. P. C. and Lee, C. T. and Ho, W. S. and Hashim,, H. and Klemeš, J. J. and Ho, C. S. (2017) Mini-review on substrate & inoculum loadings for anaerobic co-digestion of food waste. Chemical Engineering Transactions, 56 . pp. 493-498. ISSN 2283-9216 Bong, C. P. C. and Lim, L. Y. and Ho, W. S. and Lim, J. S. and Klemeš, J. J. and Towprayoon, S. and Ho, C. S. and Lee, C. T. (2017) A review on the global warming potential of cleaner composting and mitigation strategies. Journal of Cleaner Production, 146 . pp. 149-157. ISSN 0959-6526 CChaturvedi, N. D. and Manan, Z. A. and Wan Alwi, S. R. (2017) A mathematical model for energy targeting of a batch process with flexible schedule. Journal of Cleaner Production, 167 . pp. 1060-1067. ISSN 0959-6526 Che Othman, F. E. and Yusof, N. and Hasbullah, H. and Jaafar, J. and Ismail, A. F. and Abdullah, N. and Md. Nordin, N. A .H. and Aziz, F. and Wan Salleh, W. N. (2017) Polyacrylonitrile/magnesium oxide-based activated carbon nanofibers with well-developed microporous structure and their adsorption performance for methane. Journal of Industrial and Engineering Chemistry, 51 . pp. 281-287. ISSN 12260-86X Chee, Lee Pheng (2017) Production decision support system for batch processes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Chee Loong, T. and Idris, A. (2017) One step transesterification of biodiesel production using simultaneous cooling and microwave heating. Journal of Cleaner Production, 146 . pp. 57-62. ISSN 0959-6526 Chien Bong, C. P. and Ho, W. S. and Hashim, H. and Lim, J. S. and Ho, C. S. and Peng Tan, W. S. and Lee, C. T. (2017) Review on the renewable energy and solid waste management policies towards biogas development in Malaysia. Renewable and Sustainable Energy Reviews, 70 . pp. 988-998. ISSN 1364-0321 Chuo, Sing Chuong (2017) Extraction of amoxicilin and arythromycin utilising sophorolipids reversed micellar system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. DDaud, N. S. M. and Zaidel, D. N. A. and Song, L. K. and Jusoh, Y. M. M. and Muhamad, I. I. and Ya'akob, H. (2017) Microwave-Assisted stabilisation and storage stability study of rice bran oil from different varieties. Chemical Engineering Transactions, 56 . pp. 1285-1290. ISSN 2283-9216 Dharmapalan, Sumen (2017) Revival of idle wells through adding perforation in matured field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering. EEsfeh, H. K. and Azarafza, A. and Hamid, M. K. A. (2017) On the computational fluid dynamics of PEM fuel cells (PEMFCs): an investigation on mesh independence analysis. RSC Advances, 7 (52). pp. 32893-32902. ISSN 2046-2069 FFoo, L. W. and Salleh, E. and Hana, S. N. (2017) Green extraction of antimicrobial bioactive compound from piper betle leaves: Probe type ultrasound-Assisted extraction Vs supercritical carbon dioxide extraction. Chemical Engineering Transactions, 56 . pp. 109-114. ISSN 2283 9216 GGan, Shu Hui and Tham, Thing Chai and Ng, Mei Xiang and Chua, Lee Suan and Aziz, Ramlan and Baba, Mohamed Redza and Abdullah, Luqman Chuah and Ong, Sze Pheng and Law, Chung Lim (2017) Study on retention of metabolites composition in misai kucing (orthosiphon stamineus) by heat pump assisted solar drying. Journal of Food Processing and Preservation, 41 (6). ISSN 0145-8892 Ghazali, N. F. and Pahlawi, Q. A. and Hanim, K. M. and Makhtar, N. A. (2017) Enzymatic hydrolysis of oil palm empty fruit bunch using membrane reactor. Chemical Engineering Transactions, 56 . pp. 1543-1548. ISSN 2283-9216 Goh, Kian Mau and Liew, Kok Jun and Chai, Kian Piaw and Md. Illias, Rosli (2017) Use of megaprimer and overlapping extension pcr (OE-PCR) to mutagenize and enhance cyclodextrin glucosyltransferase (CGTASE) function. In: In Vitro Mutagenesis. Methods in Molecular Biology, 1498 (NA). Humana Press Inc., NA, pp. 385-396. ISBN 978-1-4939-6470-3 Goh, P. S. and Matsuura, T. and Ismail, A. F. and Ng., B. C. (2017) The Water-Energy Nexus: Solutions towards Energy-Efficient Desalination. Energy Technology, 5 (8). pp. 1136-1155. ISSN 2194-4288 HHadi Tan, Nuraimi Azlan (2017) Performance of microwave assisted aqueous enzymatic technique for elateriospermum tapos seed oil extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Hafshar, S. S. and Johari, A. and Hashim, H. (2017) Analysis of CO2 Emissions Reduction in Power Sector For Sustainable environment. Journal of Fundamental and Applied Sciences, 12 (3). pp. 645-661. ISSN 1112-9867 Hamsani, M. N. and Liew, P. Y. and Walmsley, T. G. (2017) A new numerical approach for exergy targets and losses determination in sub-ambient processes. Chemical Engineering Transactions, 61 . pp. 1225-1230. ISSN 2283-9216 Hamzah, M. Y. B. and Hashim, S. and Wan Abd. Rahman, W. A. (2017) Gamma radiation-induced synthesis of nanocurcumin: Characterization and cell viability test. International Journal of Polymeric Materials and Polymeric Biomaterials, 66 (18). pp. 926-933. ISSN 0091-4037 Hamzah, Y. B. and Hashim, S. and Rahman, W. A. W. A. (2017) Synthesis of polymeric nano/microgels: a review. Journal of Polymer Research, 24 (9). ISSN 1022-9760 Hamzehalipour Almaki, J. and Nasiri, R. and Idris, A. and Nasiri, M. and Abdul Majid, F. A. and Losic, D. (2017) Trastuzumab-decorated nanoparticles for in vitro and in vivo tumor-targeting hyperthermia of HER2+breast cancer. Journal of Materials Chemistry B, 5 (35). pp. 7369-7383. ISSN 2050-7518 Hanifah, M. F. R. and Jaafar, J. and Othman, M. H. D. and Rahman, M. A. and Ismail, A. F. and Jing, C. S. and Aziz, F. and Salleh, W. N. W. and Yusof, N. and Aziz, M. and Thirmizir, M. Z. A. (2017) Morphological study of synthesized RGO/ Pt nanocomposites via facile chemical reduction method. Sains Malaysiana, 46 (4). pp. 629-635. ISSN 0126-6039 Haron, R. and Yun, H. A. H. and Mat, R. and Mohammed, M. (2017) Overview of biodiesel wastes utilization for hydrogen production. Chemical Engineering Transactions, 56 . pp. 391-396. ISSN 2283-9216 Haryati, S. and Hamzah, A. B. and Goh, P. S. and Abdullah, M. S. and Ismail, A. F. and Bustan, M. D. (2017) Process intensification of seawater reverse osmosis through enhanced train capacity and module size - Simulation on Lanzarote IV SWRO plant. Desalination, 408 . pp. 92-101. ISSN 0011-9164 Hashim, H. and Narayanasamy, M. and Yunus, N. A. and Shiun, L. J. and Muis, Z. A. and Ho, W. S. (2017) A cleaner and greener fuel: Biofuel blend formulation and emission assessment. Journal of Cleaner Production, 146 . pp. 208-217. ISSN 0959-6526 Hassan, Nursia (2017) scaling up of simultaneous saccharification and fermentation of microwave alkali pretreated emptyfruit bunch for lactic acid production. PhD thesis, Universiti Teknologi Malaysia. Herdiansyah, M. I. and Yuliwati, E. and Mahyudin, Mahyudin and Ismail, A. F. (2017) Mathematical model of optimum composition on membrane fabrication parameters for treating batik Palembang wastewater. Journal of Engineering and Applied Sciences, 12 (4). pp. 797-802. ISSN 1816-949X Hoo, P. Y. and Hashim, H. and Ho, W. S. and Tan, S. T. (2017) Successful biogas implementation - A mini-review on biogas utilization, energy policies and economic incentives. Chemical Engineering Transactions, 61 . pp. 1495-1500. ISSN 2283-9216 IIzhab, Izirwan (2017) Carbon dioxide reforming of methane over cobalt supported on activated carbon catalysts for syngas production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Irfan, Muhammad (2017) Sulfonated polyethersulfone and functionalized multiwall carbon nanotube / polyvinylprolidone nanocomposite based hemodialysis membrane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Ismail, H. F. and Majid, F. A. A. and Hashim, Z. (2017) Eugenia polyantha enhances adipogenesis via CEBP-α and adiponectin overexpression in 3T3-L1. Chemical Engineering Transactions, 56 . pp. 1117-1122. ISSN 2283-9216 Ibrahim, G. P. S. and Isloor, A. M. and Inamuddin, Inamuddin and Asiri, A. M. and Ismail, N. and Ismail, A. F. and Ashraf, G. M. (2017) Novel, one-step synthesis of zwitterionic polymer nanoparticles via distillation-precipitation polymerization and its application for dye removal membrane. Scientific Reports, 7 (1). ISSN 2045-2322 Ikhsan, S. N. W. and Abdullah, N. and Yusof, N. and Aziz, F. and Misdan, N. and Salleh, W. N. W. and Ismail, A. F. (2017) Preparation and characterisation of polyethersulfone/ hydrous ferric oxide mixed matrix membranes with improved hydrophilicity for treatment of oily waste water. Chemical Engineering Transactions, 56 . pp. 175-180. ISSN 2283-9216 Isa, N. M. and Baharin, R. and Majid, R. A. and Rahman, W. A. W. A. (2017) Optical properties of conjugated polymer: review of its change mechanism for ionizing radiation sensor. Polymers for Advanced Technologies, 28 (12). pp. 1559-1571. ISSN 1042-7147 Ismail, A. and Illias, R. M. (2017) Site-saturation mutagenesis of mutant L-asparaginase II signal peptide hydrophobic region for improved excretion of cyclodextrin glucanotransferase. Journal of Industrial Microbiology and Biotechnology, 44 (12). pp. 1627-1641. ISSN 1367-5435 Ismail, Abdul Razak and Jaafar, Mohd. Zaidi and Wan Sulaiman, Wan Rosli and Ismail, Issham and Ng, Yinn Shiunne (2017) Identification of sandstone core damage using scanning electron microscopy. In: 3rd Advanced Materials Conference 2016, AMC 2016, 28 - 29 November 2016, Langkawi Island, Kedah. Izhab, I. and Amin, N. A. S. and Asmadi, M. (2017) Dry reforming of methane over oil palm shell activated carbon and ZSM-5 supported cobalt catalysts. International Journal of Green Energy, 14 (10). pp. 831-838. ISSN 1543-5075 JJais, Nur Farahhin (2017) Modified kenaf via nickel nitrate for hydrogen gas storage. Masters thesis, Universiti Teknologi Malaysia. Jamaludin, N. F and Hashim, H. and Muis, Z. A. and Ho, W. S. (2017) Sustainability framework for palm oil mill. Chemical Engineering Transactions, 56 . pp. 7-12. ISSN 2283-9216 Jamil, Siti Munira (2017) Development of dual-layer hollow fiber with modified electrolyte for micro-tubular solid oxide fuel cell. PhD thesis, Universiti Teknologi Malaysia. Jentry, E. M. and Hassim, M. H. and El Halwagi, M. and Ponce Ortega, J. M. (2017) Inherent occupational health assessment of biobutanol separation processes during the conceptual design stage. Chemical Engineering Transactions, 56 . pp. 91-96. ISSN 2283-9216 Jusoh, L. S. and Hashim, H. and Lim, J. S. and Mansor, N. N. A. (2017) Framework for greenhouse gas accounting towards green port. Chemical Engineering Transactions, 56 . pp. 685-690. ISSN 2283-9216 Jusoh, Norela (2017) Palm oil based emulsion liquid membrane formulation for succinic acid extraction performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Jusoh, Y. M. M. and Orsat, V. and Gariepy, Y. and Raghavan, V. (2017) Optimisation of radio frequency assisted extraction of apple peel extract: Total phenolic contents and antioxidant activity. Chemical Engineering Transactions, 56 . pp. 1153-1158. ISSN 2283-9216 KKhani, Mojtaba (2017) Photocatalytic reduction of carbon dioxide and methane using a plasmonic property of silver/titania nanoparticles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Khangholi, Shahpour (2017) Advanced glycation end products formation inhibition through standardized crude extract of punica granatum L. stem bark. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Kanniah, K. D. and Siong, H. C. (2017) Urban forest cover change and sustainability of Malaysian cities. Chemical Engineering Transactions, 56 . pp. 673-678. ISSN 2283-9216 Khairuddin, N. and Siddique, B. M. and Muhamad, I. I. (2017) Physicochemical properties and antibacterial effect of lysozyme incorporated in a wheat-based active packaging film. Arabian Journal for Science and Engineering, 42 (6). pp. 2229-2239. ISSN 1319-8025 Khairuddin, N. F. M. and Idris, A. and Irfan, M. and Loong, T. C. (2017) Microalgae harvesting of Nannochloropsis sp. Using polyethersulphone/lithium chloride/functionalised multiwall carbon nanotube membranes fabricated via temperature induced phase inversion and non-solvent induced phase inversion. International Journal of Nanoparticles, 9 (2). pp. 71-87. ISSN 1753-2507 Khairuddin, Nozieana (2017) Antimicrobial active and smart film with synergical effect of thymol and colour indicator. PhD thesis, Universiti Teknologi Malaysia. Khalil Siddig, Mohamed Abdel Rahim (2017) Modeling and analysis of process failures using probabilistic functional model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Koh, J. and Zakaria, Z. and Veerasamy, D. (2017) Overview of the use of hydrocarbon refrigerants in air conditioning systems. Chemical Engineering Transactions . ISSN 1849-1854 Kong, Helen (2017) Synthesis and characterization of surface modified banana trunk as absorbent for benzene removal from aqueous solution. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Kwee, L. M. and Hashim, H. and Ying, H. P. and Shin, H. W. and Yunus, N. A. and Shiun, L. J. (2017) Biogas generated from palm oil mill effluent for rural electrification and environmental sustainability. Chemical Engineering Transactions, 61 . pp. 1537-1542. ISSN 2283-9216 LLazim, N. A. M. and Muhamad, I. I. (2017) Encapsulation of Vitamin E using maltodextrin/Sodium Caseinate/Selenomethionine and its release study. Chemical Engineering Transactions, 56 . pp. 1951-1956. ISSN 2283-9216 Lee, C. T. and Hashim, H. and Ho, C. S. and Fan, Y. V. and Klemeš, J. J. (2017) Sustaining the low-carbon emission development in Asia and beyond: Sustainable energy, water, transportation and low-carbon emission technology. Journal of Cleaner Production, 146 . pp. 1-13. ISSN 0959-6526 Lee, Xiau Yeen (2017) Synthesis and characterization of biodegradable and thermoresponsive poly(1,8-Octanediol-glycerol-1,12-Dodecanedioate) and its composites for tissue engineering applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Loo, K. H. and Sin, L. T. and Bee, S. T. and Ratnam, C. T. and Tey, J. Y. and Tee, T. T. and Rahmat, A. R. (2017) Current Development of Electron Beam Irradiation of Natural Rubber-Polymer Blends. Polymer - Plastics Technology and Engineering, 56 (17). pp. 1874-1897. ISSN 0360-2559 Low, J. H. and Andenan, N. and Rahman, W. A. W. A. and Rusman, R. and Majid, R. A. (2017) Evaluation of rice straw as natural filler for injection molded high density polyethylene bio-composite materials. Chemical Engineering Transactions, 56 . pp. 1081-1086. ISSN 2283-9216 MMohamad, S. N. H. and Muhamad, I. I. and Khairuddin, N. and Jusoh, Y. M. M. (2017) Stability study of alpha-toc/beta-CD powders obtained by microwave heating and encapsulation process. Journal of Thermal Analysis and Calorimetry, 130 (3). pp. 1473-1480. ISSN 1388-6150 Maarasyid, Cici and Muhamad, Ida Idayu and Nik Mahmood, Nik Azmi and Zulfansyah, Zulfansyah (2017) Solid fuel feedstock from leaves litter of industrial forestry in Riau, Indonesia. In: International Conference on Energy Engineering and Smart Materials, ICEESM 2016, 18 - 20 June 2016, Bangkok, Thailand. Manan, Z. A. and Mohd. Nawi, W. N. R. and Wan Alwi, S. R. and Klemeš, J. J. (2017) Advances in Process Integration research for CO2 emission reduction - A review. Journal of Cleaner Production, 167 . pp. 1-13. ISSN 0959-6526 Mohamad, Z. and Saadan, M. Z. H. (2017) Biodegradability and tensile properties of compatibilised polyethylene/rice bran film. Chemical Engineering Transactions, 56 . pp. 919-924. ISSN 2283-9216 Mohamad Shukery, Mohamad Firdza (2017) Optimal synthesis of oil palm eco-industrial town. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Mohamed Noor, Norhayati (2017) Lipid-based nanoparticles for topical delivery of hair growth therapeutic molecules. PhD thesis, Universiti Teknologi Malaysia. Mohamed Rithuan, Mohamed Faisal (2017) Offshore platform decommissioning. Masters thesis, Universiti Teknologi Malaysia. Mohd., T. A. T. and Jaafar, M. Z. and Rasol,, A. A. A. and Ali, J. (2017) Review: A new prospect of streaming potential measurement in alkaline-surfactant-polymer flooding. Chemical Engineering Transactions, 56 . pp. 1183-1188. ISSN 2283-9216 Mohd. Nasir, H. and Md. Salleh, L. and Ismail, A. R. and Machmudah, S. (2017) Solubility correlation of gall (Quercus infectoria) extract in supercritical CO2 using semi-empirical equations. Asia-Pacific Journal of Chemical Engineering, 12 (5). pp. 790-797. ISSN 1932-2135 Mohd. Nasir,, Hasmida (2017) Bioactivities and fitting models of Quercus infectoria galls extracts using supercritical carbon dioxide. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Mohsin, M. E. A. and Elias, M. and Arsad, A. and Yong, K. C. and Alothman, O. and Zakaria, Z. Y. (2017) Electrical conductivity, thermal, rheological and morphological Characteristics of Grafted Blend of Polypyrole and Polypropylene. Chemical Engineering Transactions, 56 . pp. 1375-1380. ISSN 2283-9216 Mohsin, R. and Kumar, T. and Abd. Majid, Z. and Nasria, N. S. and Sharer, Z. and Kumar, I. and Wash, A. M. (2017) Assessment of biofuels in aviation industry for environmental sustainability. Chemical Engineering Transactions, 56 . pp. 1189-1194. ISSN 2283-9216 Mohtar, S. S. and Tengku Malim Busu, T. N. Z. and Md. Noor, A. M. and Shaari, N. and Mat, H. (2017) An ionic liquid treatment and fractionation of cellulose, hemicellulose and lignin from oil palm empty fruit bunch. Carbohydrate Polymers, 166 . pp. 291-299. ISSN 0144-8617 Mojaveryazdi, Farzaneh Sabbagh (2017) Modified acrylamide hydrogel nanocomposites for varginal drug delivery system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Moslan, Mohd. Shahrizan (2017) Wettability alteration of oil-wet dolomite using nanosolution in cationic surfactant for enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia. Mulewa, W. and Tahir, M. and Amin, N. A. S. (2017) MMT-supported Ni/TiO2 nanocomposite for low temperature ethanol steam reforming toward hydrogen production. Chemical Engineering Journal, 326 . pp. 956-969. ISSN 1385-8947 Mustapha, M. A. and Manan, Z. A. and Alwi, S. R. W. (2017) Sustainability assessment of a municipal sewage treatment plant using a single green performance indicator. Chemical Engineering Transactions, 56 . pp. 127-132. ISSN 2283-9216 Mustapha, M. A. and Manan, Z. A. and Alwi, S. R. W. (2017) Sustainable Green Management System (SGMS) – An integrated approach towards organisational sustainability. Journal of Cleaner Production, 146 . pp. 158-172. ISSN 0959-6526 Mustapha, M. A. and Manan, Z. A. and Wan Alwi, S. R. (2017) A new quantitative overall environmental performance indicator for a wastewater treatment plant. Journal of Cleaner Production, 167 . pp. 815-823. ISSN 0959-6526 Mustapha, N. A. H. and Hii, W. S. and Rahman, R. A. and Ngadi, N. and Mahmood, I. (2017) Optimisation of lipid extraction from primary sludge by soxhlet extraction. Chemical Engineering Transactions, 56 . pp. 1321-1326. ISSN 2283-9216 NNoah, N. N. F. M. and Othman, N. N. (2017) Emulsion stability of palladium extraction containing cyanex 302 as a mobile carrier in emulsion liquid membrane process. Chemical Engineering Transactions, 56 . pp. 1069-1074. ISSN 2283-9216 Nabgan, B. and Abdullah, T. A. T. and Tahir, M. and Nabgan, W. and Gambo, Y. and Ibrahim, M. and Saeh, I. and Moghadamian, K. (2017) Evaluation of theoretical and experimental mass transfer limitation in steam reforming of phenol-PET waste to hydrogen production over Ni/La-promoted Al2O3 catalyst. Journal of Environmental Chemical Engineering, 5 (3). pp. 2752-2760. ISSN 2213-3437 Nabgan, Walid (2017) Hydrogen production from steam reforming of phenol over supported nickel-cobalt catalyst. PhD thesis, Universiti Teknologi Malaysia. Nasiri, R. and Almaki, J. H. and Idris, A. and Nasiri, M. and Irfan, M. and Abdul Majid, F. A. and Nodeh, H. R. and Hasham, R. (2017) Targeted delivery of bromelain using dual mode nanoparticles: Synthesis, physicochemical characterization,: In vitro and in vivo evaluation. RSC Advances, 7 (64). pp. 40074-40094. ISSN 2046-2069 Nasri, N. S. and Abbas, I. M. H. I. and Martel, H. and Abdulrasheed, A. and Zain, H. M. and Sidik, U. H. and Mohsin, R. and Majid, Z. A. and Rashid, N. M. and Sharer, Z. and Garba, A. (2017) CO2 adsorption isotherms on KOH, H3PO4 and FeCl3.6H2O Impregnated palm shell kernel activated carbon. Chemical Engineering Transactions, 56 . pp. 181-186. ISSN 2283-9216 Nawar, A. and Khoja, A. H. and Akbar, N. and Ansari, A. A. and Qayyum, M. and Ali, E. (2017) Physical abrasion method using submerged spike balls to remove algal biofilm from photobioreactors. BMC Research Notes, 10 (1). ISSN 1756-0500 Ng, R. T. L. and Hassim, M. H. and Hurme, M. (2017) A hybrid approach for estimating fugitive emission rates in process development and design under incomplete knowledge. Process Safety and Environmental Protection, 109 . pp. 365-373. ISSN 0957-5820 Nurariffudin, M. and Hashim, H. and Shiun, L. J. and Siong, H. C. (2017) Economic assessment of microalgae-based CO2 utilization in power plant sector in Malaysia. Chemical Engineering Transactions, 56 . pp. 643-648. ISSN 2283-9216 OOng, Pei Ying (2017) Optimisation and kinetic modelling for the production of 5- aminolevulinic acid by Rhodopseudomonas palustris in the solid state fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Oladokun, Olagoke Abimbola (2017) Kinetic studies and mathematical modelling of Imperata cylindrica flash pyrolysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Omar, Shaziera (2017) Correlation between foam stability and electrokinetic signal in foam assisted water alternate gas process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Othman, F. E. C. and Yusof, N. and Hasbullah, H. and Jaafar, J. and Ismail, A. F. and Nasri, N. S. (2017) Physicochemical properties and methane adsorption performance of activated carbon nanofibers with different types of metal oxides. Carbon Letters, 24 (1). pp. 82-89. ISSN 1976-4251 Othman, Mohd. Amerul Asrah (2017) A review of vegetable oils technical properties as enviromental friendly mud. Masters thesis, Universiti Teknologi Malaysia. Othman, Noor Hidayu (2017) Deacidification of crude palm oil using hollow fiber membrane contactor system. Masters thesis, Universiti Teknologi Malaysia. PPhoon, Li Yee (2017) Green diesel blends design using decomposition-based optimization approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Pa'e, Norhayati (2017) Characterisation of in-situ modified bacterial cellulose using 2-acetyl-1-pyrroline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering. Palaniappan, Thenappan and Saman, Norasikin and Mat, Hanapi and Johari, Khairiraihanna (2017) Synthesis and characterization of sulfur-functionalized silica nanocapsules as mercury adsorbents. In: 3rd Advanced Materials Conference 2016, AMC 2016, 28 - 29 November 2016, Langkawi Island, Kedah. Piong, H. S. and Chin, K. Y. and Bakar, H. T. A. and Ling, C. H. and Kidam, K. and Ali, M. W. and Hassim, M. H. and Kamarden, H. (2017) The contribution of management of change to process safety accident in the chemical process industry. Chemical Engineering Transactions, 56 . pp. 1363-1368. ISSN 2283-9216 Piroozian, Ali (2017) Experimental study on waxy oil-water horizontal flow at temperatures above the wax appearance temperature. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. RRahimi, A. N. and Mustafa, M. F. and Zaine, M. Z. and Ibrahim, N. and Ibrahim, K. A. and Hamid, M. K. A. (2017) Hydrocarbon mixture fractionation direct sequence retrofitting and feed condition sensitivity analysis. Chemical Engineering Transactions, 56 . pp. 787-792. ISSN 2283-9216 Rahimi, A. N. and Mustafa, M. F. and Zaine, M. Z. and Ibrahim, N. and Ibrahim, K. A. and Hamid, M. K. A. (2017) Optimal retrofit of natural gas liquids separation direct sequence and feed condition sensitivity analysis. Chemical Engineering Transactions, 56 . pp. 1309-1314. ISSN 2283-9216 Rahman, N. R. H. A. and Yunus, N. A. and Mustaffa, A. A. (2017) Ionic liquid screening for solvent design of herbal phytochemical extraction. Chemical Engineering Transactions, 56 . pp. 1075-1080. ISSN 2283-9216 Rajindar Singh, Jasvinder Singh (2017) Near wellbore remediation for organic impaired reservoir using a thermo-chemical system. Masters thesis, Universiti Teknologi Malaysia. Ramli, A. N. M. and Aznan, T. N. T. and Illias, R. M. (2017) Bromelain: from production to commercialisation. Journal of the Science of Food and Agriculture, 97 (5). pp. 1386-1395. ISSN 225142 Ramli, N. A. and Rahman, R. A. and Illias, R. Md. (2017) Microbial growth kinetics in isobutanol production by saccharomyces cerevisiae. Chemical Engineering Transactions, 56 . pp. 793-798. ISSN 2283-9216 Razali, N. and Hossain, M. S. and Taiwo, O. A. and Ibrahim, M. and Nadzri, N. W. M. and Razak, N. and Rawi, N. F. M. and Mahadar, M. M. and Kassim, M. H. M. (2017) Influence of acid hydrolysis reaction time on the isolation of cellulose nanowhiskers from oil palm empty fruit bunch microcrystalline cellulose. BioResources, 12 (3). pp. 6773-6788. ISSN 1930-2126 Razmi, F. A. and Ngadi, N. and Rahman, R. A. and Kamaruddin, M. J. (2017) Removal of reactive dye using new modified chitosan-pandan sorbent. Chemical Engineering Transactions, 56 . pp. 121-126. ISSN 2283-9216 Rozali, N. E. M. and Zaki, S. A. A. S. M. and Ho, W. S. and Liu, W. H. and Alwi, S. R. W. and Manan, Z. A. and Klemes, J. J. (2017) Study of the effects of peak/off-peak load shifting on hybrid power system storage using Power Pinch Analysis. Chemical Engineering Transactions, 61 . pp. 1519-1524. ISSN 2283-9216 Rudin, S. N. F. M. and Muis, Z. and Hashim, H. and Ho, W. S. (2017) Overview of carbon reduction, capture, utilization and storage: Development of new framework. Chemical Engineering Transactions, 56 . pp. 649-654. ISSN 2283-9216 SSabbagh, F. and Muhamad, I. I. (2017) Physical and chemical characterisation of acrylamide-based hydrogels, Aam, Aam/NaCMC and Aam/NaCMC/MgO. Journal of Inorganic and Organometallic Polymers and Materials, 27 (5). pp. 1439-1449. ISSN 1574-1443 Safiei, Nor Zanariah and Ngadi, Norzita and Johari, Anwar and Zakaria, Zaki Yamani and Jusoh, Mazura (2017) Grape juice concentration by progressive freeze concentrator sequence system. Journal of Food Processing and Preservation, 41 (1). e12910-e12910. ISSN 0145-8892 Saimon, N. N. and Jusoh, M. and Kamarudin, M. J. and Arsad, A. and Zakaria, Z. Y. (2017) Thermodynamic analysis of hydrogen production from methanol-ethanol-glycerol mixture through dry reforming. Chemical Engineering Transactions, 56 . pp. 967-972. ISSN 2283-9216 Salahudeen, Shafaat Ahmed (2017) Design of rotor for internal batch mixer and mixing elements for twin screw extruder for polyolefin processing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Samsudin, M. D. M. and Don, M. M. and Ibrahim, N. and Kasmani, R. M. and Zakaria, Z. and Kamarudin, K. S. (2017) Batch fermentation of bioethanol from the residues of elaeis guineensis: Optimisation using response surface methodology. Chemical Engineering Transactions, 56 . pp. 1579-1584. ISSN 2283-9216 Sanadi, N. F. A. and Van Fan, Y. and Leow, C. W. and Wong, J. H. and Koay, Y. S. and Lee, C. T. and Chua, L. S. and Sarmidi, M. R. (2017) Growth of bacillus coagulans using molasses as a nutrient source. Chemical Engineering Transactions, 56 . pp. 511-516. ISSN 2283-9216 Sangaran, S. and Haron, S. (2017) Operator training simulator for ethylene plant. Chemical Engineering Transactions, 56 . pp. 1621-1626. ISSN 2283-9216 Sa’at, N. and Samsuri, A. and Hamzah, K. and Sulaiman, H. (2017) Review on the compatibility of non-metal materials in automotive components of diesel engine vehicles with blended biodiesel fuel. Advanced Science Letters, 23 (5). pp. 4728-4732. ISSN 1936-6612 Sidik, H. U. and Nasri, N. S. and Rashid, N. M. and Zaini, M. A. A. and Abdulrahman, A. and Zain, H. M. (2017) Development of hybrid coconut shell-peek adsorbent for methane adsorption: optimization using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5822-5829. ISSN 1819-6608 Sing, C. L. I. and Noor, Z. Z. and Yusuf, R. O. and Ali, M. R. M. and Taib, S. M. and Siong, H. C. (2017) Development of SIs on solid waste management through selection: A review. Chemical Engineering Transactions, 56 . pp. 535-540. ISSN 2283-9216 Sohaimi, K. S. A. and Ngadi, N. and Mat, H. and Inuwa, I. M. and Wong, S. (2017) Synthesis, characterization and application of textile sludge biochars for oil removal. Journal of Environmental Chemical Engineering, 5 (2). pp. 1415-1422. ISSN 2213-3437 Suhaimi, S. H. and Hasham, R. and Rosli, N. A. (2017) Optimisation of orthosiphon stamineus loaded onto nanostructured lipid carrier using D optimal mixture design. Chemical Engineering Transactions, 56 . pp. 1141-1146. ISSN 2283-9216 Sulaiman, R. N. R. and Othman, N. (2017) Synergistic green extraction of nickel ions from electroplating waste via mixtures of chelating and organophosphorus carrier. Journal of Hazardous Materials, 340 . pp. 77-84. ISSN 0304-3894 TTahir, M. and Tahir, B. and Amin, N. A. S. and Zakaria, Z. Y. (2017) Photo-induced reduction of CO2 to CO with hydrogen over plasmonic Ag-NPs/TiO2 NWs core/shell hetero-junction under UV and visible light. Journal of CO2 Utilization, 18 . pp. 250-260. ISSN 2212-9820 Tahir, B. and Tahir, M. and Amin, N. A. S. (2017) Photo-induced CO2 reduction by CH4/H2O to fuels over Cu-modified g-C3N4 nanorods under simulated solar energy. Applied Surface Science, 419 . pp. 875-885. ISSN 0169-4332 Talebian Kiakalaieh, A. and Amin, N. A. S. (2017) Kinetic study on catalytic conversion of glycerol to renewable acrolein. Chemical Engineering Transactions, 56 . pp. 655-660. ISSN 2283-9216 Tan, Y. H. and Goh, P. S. and Ismail, A. F. and Ng, B. C. and Lai, G. S. (2017) Decolourization of aerobically treated palm oil mill effluent (AT-POME) using polyvinylidene fluoride (PVDF) ultrafiltration membrane incorporated with coupled zinc-iron oxide nanoparticles. Chemical Engineering Journal, 308 . pp. 359-369. ISSN 1385-8947 Tang, S. H. and Zaini, M. A. A. (2017) Malachite green adsorption by potassium salts-activated carbons derived from textile sludge: Equilibrium, kinetics and thermodynamics studies. Asia-Pacific Journal of Chemical Engineering, 12 (1). pp. 159-172. ISSN 1932-2135 Tarmizi, M. S. and Muis, Z. A. and Hashim, H. and Lim, J. S. and Ho, W. S. (2017) Centralised sewage treatment plant assisted by geographic information system for electricity generation. Chemical Engineering Transactions, 56 . pp. 1165-1170. ISSN 2283-9216 Theo, W. L. and Lim, J. S. and Ho, W. S. and Hashim, H and Lee, C. T. (2017) Review of distributed generation (DG) system planning and optimisation techniques: Comparison of numerical and mathematical modelling methods. Renewable & Sustainable Energy Reviews, 67 . pp. 531-573. ISSN 1364-0321 UUllah Khan, I. and Hafiz Dzarfan Othman, M. and Hashim, H. and Matsuura, T. and Ismail, A. F. and Rezaei-DashtArzhandi, M. and Wan Azelee, I. (2017) Biogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage. Energy Conversion and Management, 150 . pp. 277-294. ISSN 0196-8904 Uthman, Habibu (2017) ETFE grafted membranes using 1-vinylimidazole, 1-vinyl-2-pyrrolidone, triallyl-cyanurate doped with phosphoric acid for high temperature applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. VVan Fan, Y. and Lee, C. T. and Klemeš, J. J. (2017) The update of anaerobic digestion and the environment impact assessments research. Chemical Engineering Transactions, 57 . pp. 7-12. ISSN 2283-9216 Vijayan, Sharniyah (2017) Hydraulic fracturing application in shale gas reservoir. Masters thesis, Universiti Teknologi Malaysia. WW. I., Syarifah Nazirah and Y., Norhaniza and A., Farhana and M., Nurasyikin (2017) A review of oilfield wastewater treatment using membrane filtration over conventional technology. Malaysian Journal of Analytical Sciences, 21 (3). pp. 643-658. ISSN 1394-2506 Wong, K. C. and Goh, P. S. and Ismail, A. F. (2017) Highly permeable and selective graphene oxide-enabled thin film nanocomposite for carbon dioxide separation. International Journal of Greenhouse Gas Control, 64 . pp. 257-266. ISSN 1750-5836 YYusoff, N. A. and Ngadi, N. and Alias, H. and Jusoh, M. (2017) Chemically treated chicken bone waste as an efficient adsorbent for removal of acetaminophen. Chemical Engineering Transactions, 56 . pp. 925-930. ISSN 2283-9216 Yahya, N. and Ismail, N. and Zakaria, Z. Y. and Ngadi, N. and Rahman, R. A. and Jusoh, M. (2017) The effect of coolant temperature and stirrer speed for concentration of sugarcane via progressive freeze concentration process. Chemical Engineering Transactions, 56 . pp. 1147-1152. ISSN 2283-9216 Yahya, N. and Jie, L. W. and Zakaria, Z. Y. and Ngadi, N. and Mohamad, Z. and Rahman, R. A. and Jusoh, M. (2017) Water purification of lake water using progressive freeze concentration method. Chemical Engineering Transactions, 56 . pp. 43-48. ISSN 2283-9216 Yahya, Noor Yahida (2017) Synthesis of mesoporous calcium titanate catalyst for transesterification of used cooking oil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. Yekeen, N. and Manan, M. A. and Idris, A. K. and Samin, A. M. and Risal, A. R. (2017) Influence of silicon oxide and aluminum oxide nanoparticles on air and CO2 foams stability in presence and absence of oil. Chemical Engineering Transactions, 56 . pp. 1243-1248. ISSN 2283-9216 Yekeen, Nurudeen (2017) Nanoparticles-surfactant foam and crude oil interaction in porous media. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering. ZZahari, M. A. M. and Salleh, L. (2017) Application of genetic algorithm on model-based optimisation of supercritical carbon dioxide extraction: An overview. Chemical Engineering Transactions, 56 . pp. 67-72. ISSN 2283-9216 (In Press) Zailani, S. N. and Razali, F. and Lee, C. T. and Leow, C. W. and Khamis, A. K. (2017) Assessment of compost stability using single and mixed culture in a static semi-closed fed-batch reactor. Chemical Engineering Transactions, 56 . pp. 613-618. ISSN 2283-9216 Zainol, M. M. and Amin, N. A. S. and Asmadi, M. (2017) Preparation and characterization of impregnated magnetic particles on oil palm frond activated carbon for metal ions removal. Sains Malaysiana, 46 (5). pp. 773-782. ISSN 0126-6039 Zainol, Muzakkir Mohammad (2017) Carbon cryogel production from lignin, ionic liquid and liquefied oil palm frond as catalyst for esterification of levulinic acid. PhD thesis, Universiti Teknologi Malaysia. Zainol, S. N. and Mohd. Said, S. and Abidin, Z. Z. and Azizan, N. and Majid, F. A. A. and Jantan, I. (2017) Synergistic benefit of eugenia caryophyllata L. and cinnamomum zeylanicum blume essential oils against oral pathogenic bacteria. Chemical Engineering Transactions, 56 . pp. 1429-1434. ISSN 2283-9216 Zainol, Siti Nurazwa (2017) Interaction of combined essential oils from syzygium aromaticum and cinnamomum verum on oral pathogenic bacteria. Masters thesis, Universiti Teknologi Malaysia. Zhang,, C. and Romagnoli, A. and Kim, J. Y. and Azli, A. A. M. and Rajoo, S. and Lindsay, A. (2017) Implementation of industrial waste heat to power in Southeast Asia: an outlook from the perspective of market potentials, opportunities and success catalysts. Energy Policy, 106 . pp. 525-535. ISSN 0301-4215 Zulkepli, N. E. and Muis, Z. A. and Mahmood, N. A. N. and Hashim, H. and Ho, W. S. (2017) Cost benefit analysis of composting and anaerobic digestion in a community: A review. Chemical Engineering Transactions, 56 . pp. 1777-1782. ISSN 2283-9216 |