Items where Year is 2016

A. Wahid, Rohayu (2016) Policy guidelines to improve data governance in university college of Agroscience Malaysia : a case study. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Abdul Halim, Syafrina (2016) Projections of future extreme rainfall events using statistical downscaling in Malaysia. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Abdul Latiff, Liza and Abu, Aminudin and Moneer, Ali Lilo (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-473. ISSN 1992-8645

Abu, M. Y. and Jamaluddin, K. R. and Zakaria, M. A. (2016) Classification of crankshaft remanufacturing using Mahalanobis-Taguchi system. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3413-3422. ISSN 2229-8649

Abu Bakar, S. H. and Muhammad Sukki, F. and Freier, D. and Ramirez Iniguez, R. and Mallick, T. K. and Munir, A. B. and Mohd. Yasin, S. H. and Abubakar Masud, A. and Bani, N. A. (2016) Performance analysis of a solar window incorporating a novel rotationally asymmetrical concentrator. Energy, 99 . pp. 181-192. ISSN 0360-5442

Abu Husain, M. K. and Mohd Zaki, N. I. and Mallahzadeh, H. and Najafian, G. (2016) Short-term probability distribution of the extreme values of offshore structural response by an efficient time simulation technique. Ships and Offshore Structures, 11 (3). pp. 286-299. ISSN 1744-5302

Abu Husain, M. K. and Mohd. Zaki, N. I. and Johari, M. B. and Najafian, G. (2016) Extreme response prediction for fixed offshore structures by Monte Carlo time simulation technique. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2016) The effect of different methods of simulating wave induced water particle kinematics on the 100-year responses. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Examining the demand for green events to promote sustainable practices in tourism: a concept paper. Advanced Science Letters, 22 (5-6). pp. 1402-1405. ISSN 1936-6612

Ahmad, N. L. and Yunus, N. A. M. and Rashid, W. E. W. and Zamzuri, N. H. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Theorizing event attendees behavior to increase the demand for sustainable events. International Business Management, 10 (17). pp. 3853-3859. ISSN 1993-5250

Ahmad, Nor Lela and Mohd. Yunus, Noor Azlina and Wan Rashid, Wan Edura and Norol, Hamiza Zamzuri and Nik Mahmood, Nik Hasnaa and Shamsuddin, Shuhana (2016) Theorizing event attendees' behavior to increase the demand for sustainable events. International Business Management, 10 (17). pp. 3853-3859. ISSN 1993-5250

Al-Arimi, A. A. A. A. and Masrom, M. and Mahmood, N. H. N. (2016) The moderating effect of Islamic work ethics on the relationship between knowledge management capabilities and organizational performance at the private higher education institutions in Oman. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 396-407. ISSN 1992-8645

Al-Arimi, A. A. A. A. and Masrom, M. and Mahmood, N. H. N. (2016) The moderating effect of Islamic work ethics on the relationship between knowledge management capabilities and organizational performance at the private higher education institutions in Oman. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 396-407. ISSN 1992-8645

Alatas, I. M. and Kamaruddin, S. A. and Nazir, R. and Irsyam, M. (2016) Effect of weathering on disintegration and shear strength reduction of clay shale. Jurnal Teknologi, 78 (7-3). pp. 93-99. ISSN 0127-9696

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. (2016) Investigation of the influence of particle size on the migration of DNAPL in unsaturated sand. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Alaziaza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2016) Investigation of light non-aqueous phase liquid migration single and double-porosity soil using light transmission visualization method (LTV). In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Anuar, L. and Amrin, A. and Mohammad, R. and Ourdjini, A. (2016) Vehicle accelerated corrosion test procedures for automotive in Malaysia. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Azmi, N. S. and Ahmad, R. and Ibrahim, R. (2016) Fluorescent light (FL), red LED and blue LED spectrums effects on in vitro shoots multiplication. Jurnal Teknologi, 78 (6-6). pp. 93-97. ISSN 0127-9696

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Muhammad-Sukki, F. and Abubakar MasUd, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) Artificial neural network based controller for line starting performance synchronous motor of a conveyor system using field oriented self-controlled. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) A fuzzy logic controller to line starting performance synchronous motor for a crane system using vector control. Jurnal Teknologi, 78 (6-6). pp. 81-86. ISSN 0127-9696

Doulatabadi, M. and Yusof, S. M. and Wong, K. Y. (2016) Sustained quality award status in developing country: a study on the Dubai quality award recipients. In: IEOM Detroit Conference, IEOM 2016, 23-25 Sept 2016, Lawrence Technological University Southfield, United States.

Durdyev, S. and Ismail, S. (2016) On-site construction productivity in Malaysian infrastructure projects. Structural Survey, 34 (4-5). pp. 446-462. ISSN 0263-080X

Dziyauddin, R. A. and Doufexi, A. and Kaleshi, D. and Mohd. Sam, S. and Mohamed, N. (2016) Performance Evaluation of Dynamic Burst Mapping in a WiMAX System. Wireless Personal Communications, 91 (3). pp. 1191-1212. ISSN 0929-6212

Fahami Zainal, Sheikh Muhammad Hafiz (2016) The virtual force feedback for torque estimation and control in a vechicle Steer by Wire (SBW) system. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Farrah Diana, Farrah Diana and Saiful Bahry, Saiful Bahry and Masrom, Maslin and Masrek, Mohamad Noorman (2016) Website credibility and user engagement: a theoretical integration. In: 4th International Conference on User Science and Engineering, 23-25 Aug, 2016, Melaka, Malaysia.

Fathi, Mohamad Syazli and Zakiyudin, Mohd. Zulakhmar and Rambat, Shuib and Mohd. Tobi, Siti Uzairiah and Rajab, Nor A'ini and Abdul, Karim Mirasa and Md. Daud, Mohd. Yusof (2016) Building maintenance management in Malaysian institutions of higher education, the context-specific application for information delivery system. In: 8th International Real Estate Research Symposium (IRERS 2016), 26-28 Apr, 2016, Kuala Lumpur, Malaysia.

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Abubakar MasUd, A. and Albarracín Sánchez, Ricardo and Ardila Rey, J. A. and Munir, A. B. and Mohd. Yasin, S. H. and Bani, N. A. (2016) Software simulation and experimental characterisation of a rotationally asymmetrical concentrator under direct and diffuse solar radiation. Energy Conversion and Management, 122 . pp. 223-238. ISSN 0196-8904

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Mas'ud, A. A. and Bani, N. A. (2016) Effect of diffuse radiation on the performance of a rotationally asymmetrical optical concentrator. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Ghafourian, K. and Mohamed, Z. and Ismail, S. and Malakute, R. and Abolghasemi, M. (2016) Current status of the research on construction and demolition waste management. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Ghafourian, Kambiz and Mohamed, Zainai and Ismail, Syuhaida and Malakute, Roya and Abolghasemi, Maryam (2016) The 100 most cited scientific papers in construction and demolition waste management. Research Journal of Applied Sciences, Engineering and Technology, 13 (09). pp. 741-749. ISSN 2040-7459

Gozali, L. and Masrom, M. and Zagloel, T. Y. M. and Habibah, Habibah and Haron, N. (2016) A framework of successful business incubators for indonesian public universities. International Journal of Technology, 7 (6). pp. 1086-1096. ISSN 2086-9614

Habidin, Nurul Fadly and Mohd. Yusof, Sha'ri and Mohd. Fuzi, Nursyazwani (2016) Lean six sigma, strategic control systems, and organizational performance for automotive suppliers. International Journal of Lean Six Sigma, 7 (2). pp. 110-135. ISSN 2040-4166

Halim, H. A. and Ahmad, N. H. and Ramayah, T. (2016) The impact of outsourcing on performance and competitive priorities among Malaysian SMEs. In: Managerial Strategies and Solutions for Business Success in Asia. IGI Global, pp. 157-175. ISBN 978-152251887-7

Hamed Ahmed, Sharaf Eldin and Mohd. Yusof, Sha'ri (2016) Ranking critical success factors for sustaining total quality management in engineering sector in Sudan. International Journal of Applied Engineering Research, 11 (21). pp. 10708-10715. ISSN 0973-4562

Hamza, M. G. and Latiff, L. A. and Alfagi, A. S. (2016) Influence of ellipsoid dust Particle Size Distribution on microwave and millimeter wave frequencies. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, Bangladesh.

Harun, A. N. and Ahmad, R. and Mohamed, N. (2016) The effects of continuous lighting (CL) method on the growth development of brassica chinensis for led plant factory in wsn application. Jurnal Teknologi, 78 (12-3). pp. 23-30. ISSN 0127-9696

Ibrahim, Nuradilah (2016) Factors influencing the acceptance of mobile application among millennials. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Imran, Mohd. Salleh and Sarip, Shamsul and Muhtazaruddin, Mohd. Nabil and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Abdul Aziz, Sa'ardin (2016) Structural health monitoring (SHM) on high stress loading of wing bracket. Journal of Advanced Research in Applied Mechanics, 27 (1). pp. 16-22. ISSN 2289-7895

Ismail, A. and Dolah, R. and Miyagi, Z. (2016) Factors identification on optimization of ball placement tool for flip-chip- ball-grid-array product. Jurnal Teknologi, 78 (1). pp. 175-179. ISSN 0127-9696

Jamil, A. H. A. and Fathi, M. S. (2016) The integration of lean construction and sustainable construction: a stakeholder perspective in analyzing sustainable lean construction strategies in Malaysia. In: Conference on ENTERprise Information Systems / International Conference on Project MANagement / Conference on Health and Social Care Information Systems and Technologies, CENTERIS / ProjMAN / HCist 2016, 5-7 Oct 2016, Portugal.

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2016) Investigation of electromagnetics radiation for stroke patients and non-stroke participants. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Krishnakutty, Premala Nair (2016) Employees' awareness towards IT security measures implemented in their organization : selected financial institution. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Roles and responsibilities of construction players in projects using building information modeling (BIM). In: 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things, PLM 2015, 19-21 Oct 2015, Doha, Qatar.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Transformation of Malaysian construction industry with Building Information Modelling (BIM). In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. and Al Mashhadany, Y. I. (2016) Wireless fault tolerances decision using artificial intelligence technique. Journal of Theoretical and Applied Information Technology, 87 (2). pp. 324-335. ISSN 1992-8645

Lilo, Moneer Ali and Latiff, L. A. and Abu, Aminudin and Al Mashhadany, Yousif I. (2016) Vibration fault detection and classifaction based on the fft and fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4633-4637. ISSN 1819-6608

Mad Kaidi, H. and Ahmad, N. and Mohd. Izhar, M. A. and Mohd. Sam, S. and Fisal, N. (2016) Irregular repetition code hybrid ARQ in wireless system. Jurnal Teknologi, 78 (6-2). pp. 1-6. ISSN 0127-9696

Mas'ud, A. A. and Albarracín, R. and Ardila-Rey, J. A. and Muhammad-Sukki, F. and Illias, H. A. and Bani, N. A. and Munir, A. B. (2016) Artificial neural network application for partial discharge recognition: survey and future directions. Energies, 9 (8). pp. 1-18.

Masrom, M. (2016) E-government, e-surveillance, and ethical issues from Malaysian perspective. In: Ethical Issues and Citizen Rights in the Era of Digital Government Surveillance. IGI Global, pp. 249-263. ISBN 978-146669906-9

Mat Sooma, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Azman, N. U. and Najafian, G. (2016) Reliability-based design and assessment for lifetime extension of ageing offshore structures. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Memon, M. and Rahim, A. and Eteng, A. (2016) Wireless power transfer in near-field communication using a current-controlled multi loops with a loaded capacitance. Microwave and Optical Technology Letters, 58 (10). pp. 2472-2476. ISSN 0895-2477

Ming, J. T. C. and Noor, N. M. and Rue, N. C. and Rijal, O. M. and Kassim, R. M. and Yunus, A. (2016) Performance evaluation system for automated lung segmentation system using HRCT thorax images. In: IEEE Student Symposium in Biomedical Engineering and Sciences, ISSBES 2015, 4 Nov 2015, Selangor, Malaysia.

Mohamed, N. and Sam, S. M. and Ngajikin, N. H. (2016) Power fading effects in millimeter-wave radio over fiber (RoF) link. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Mohd. Sharif, N. and Md. Yusoff, N. and Zaki, S. A. (2016) Q-switched Thulium-doped fiber laser using nitrogen-doped graphene in linear and ring cavity. In: 6th IEEE International Conference on Photonics, ICP 2016; Kuching, Sarawak; Malaysia, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Mukhlas, N. A. and Najafian, G. (2016) Prediction of offshore structural response extreme values by modified finite-memory nonlinear system modeling. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Derivation of Morison's force coefficients by three alternative forms of the method of moments. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Extreme structural response values from various methods of simulating wave kinematics. Ships and Offshore Structures, 11 (4). pp. 369-384. ISSN 1744-5302

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Prediction of 100-year responses of fixed offshore structures using the modified version of finite memory nonlinear system models. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Moneer, Ali Lilo and Abdul Latiff, Liza and Yousif, I. Almashhadany and Abu, Aminudin (2016) Identify and classify vibration signal for steam turbine based on neural sleep fuzzy system. Research Journal in Applied Sciences, Engineering and Technology, 12 (5). pp. 589-598. ISSN 2040-7459

Muhammad, Nur Atiqah (2016) E-mail encryption framework for Malaysian public sector. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Naje, A. S. and Chelliapan, S. and Zakaria, Z. and Abbas, S. A. (2016) Electrocoagulation using a rotated anode: a novel reactor design for textile wastewater treatment. Journal of Environmental Management, 176 . pp. 34-44. ISSN 0301-4797

Naje, Ahmed Samir (2016) Electrocoagulation using novel configurations electrodes for treatment of textile wastewater. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Naje, Ahmed Samir and Chelliapan, Shreeshivadasan and Zakaria, Zuriati and A. Ajeel, Mohammed and Sopian, Kamaruzzaman and Hasan, Husam Abdulrasool (2016) Electrocoagulation by solar energy feed for textile wastewater treatment including mechanism and hydrogen production using a novel reactor design with a rotating anode. RSC Advances, 6 (12). pp. 10192-10204. ISSN 2046-2069

Nasir, M. F. M. and Rahim, A. R. A. and Hamzah, H. S. (2016) Supply chain management framework development for new multiple life cycle product development. In: International Conference on Industrial Engineering and Engineering Management, IEEM 2016, 4 December 2016 through 7 December 2016, Bali; Indonesia.

Nasorudin, N. N. and Hassan, M. I. and Zulkifli, N. A. and Rahman, A. A. (2016) Geospatial database for strata objects based on land administration domain modeL (LADM). In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Ng, C. R. and Than, J. C. M. and Noor, N. M. and Rijal, O. M. (2016) Double segmentation method for brain region using FCM and graph cut for CT scan images. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Nifa, F. A. A. and Rahim, S. A. and Rani, W. N. M. W. M. and Ismail, M. N. (2016) Collaborative procurement for developing a sustainable campus. In: 2016 International Conference on Applied Science and Technology, ICAST 2016, 11 April 2016 through 13 April 2016, Kedah; Malaysia.

Nifa, F. A. A. and Wan Mohd. Rani, W. N. M. and Ismail, M. N. and Rahim, S. A. (2016) Towards developing a sustainable campus: best practice approach. International Journal of Supply Chain Management, 5 (4). pp. 131-138. ISSN 2051-3771

Noor, F. M. and Jamaludin, K. R. and Ahmad, S. (2016) Production of stainless steel 316L foam with different solid loading. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Noor, N. M. and Rijal, O. M. and Than, J. C. M. and Kassim, R. M. and Yunus, A. (2016) Regression as a tool to measure segmentation quality and preliminary indicator of diseased lungs. In: 7th Pacific-Rim Symposium on Image and Video Technology, PSIVT 2015, 25-27 Nov 2015, Auckland, New Zealand.

Norzaida, A. and Zalina, M. D. and Fadhilah, Y. (2016) Application of Fourier series in managing the seasonality of convective and monsoon rainfall. Hydrological Sciences Journal-Journal Des Sciences Hydrologiques, 61 (10). pp. 1967-1980.

Nurbaya, Z. and Wahid, M. H. and Rozana, M. D. and Annuar, I. and Alrokayan, S. A. H. and Khan, H. A. and Rusop, M. (2016) Fabrication of PVDF-TrFE based bilayered PbTiO3/PVDF-TrFE films capacitor. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Nurbaya, Z. and Wahid, M. H. and Rozana, M. D. and Gan, W. C. and Majid, W. H. A. and Alrokayan, S. A. H. and Khan, H. A. and Rusop, M. (2016) Preparation of PVDF-TrFE layer-based bilayer composite PbTiO3/PVDF-TrFE films for MIM capacitor. Transactions of the Institute of Metal Finishing, 94 (4). pp. 187-192. ISSN 0020-2967

Panahi, Babak and Moezzi, Elena and Preece, Christopher Nigel and Wan Zakaria, Wan Normeza (2016) Personal-organisational value conflicts and job satisfaction of internal construction stakeholders. Construction Economics And Building, 16 (1). pp. 1-17. ISSN 2204-9029

Preece, C. N. and Mat Isa, C. M. and Saman, H. M. and Che Ibrahim, C. K. (2016) Development of entry location, entry timing and entry mode decision model for construction firms in international markets. Construction Management and Economics, 34 (4-5). pp. 236-257. ISSN 0144-6193

Rahim, R. A. and Mahmood, N. H. N. and Masrom, M. (2016) The role of knowledge management in facilitating innovation for sustainable SMEs performance. In: International Conference on Technology, Informatics, Management, Engineering and Environment, TIME-E 2015, 7-9 Sept 2015, Toba Lake, Indonesia.

Rahim, R. A. and Nik Mahmood, N. H. and Masrom, M. (2016) Enhancing Malaysian’s SMEs performance: leadership and innovation. Advanced Science Letters, 22 (5-6). pp. 1530-1534. ISSN 1936-6612

Ramli, N. H. and Kamarudin, M. R. (2016) The channel measurement and modeling of implantable antenna at 6.0 GHz for wireless body area network. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Rezaei, S. and Shahijan, M. K. and Amin, M. and Ismail, W. K. W. (2016) Determinants of App stores continuance behavior: a PLS path modelling approach. Journal of Internet Commerce, 15 (4). pp. 408-440. ISSN 1533-2861

Rohani, Mohd. Faiz (2016) Development of real time carbon emissions and energy monitoring system for industrial environment using OPC architecture. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Saba, L. and Than, J. C. M. and Noor, N. M. and Rijal, O. M. and Kassim, R. M. and Yunus, A. and Ng, C. R. and Suri, J. S. (2016) Inter-observer variability analysis of automatic lung delineation in normal and disease patients. Journal of Medical Systems, 40 (6). ISSN 0148-5598

Selvan, Pugneswary Panner (2016) Information security awareness among system administrators and end-user perspectives. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Shabanzadeh, P. and Yusof, R. and Shameli, K. and Khanehzaei, H. (2016) Simulation and modeling of synthesis Cu nanoparticles in sodium alginate media by means of expert systems. Research on Chemical Intermediates, 42 (4). pp. 2831-2843. ISSN 0922-6168

Shahijan, M.K. and Rezaei, S. and Amin, M. (2016) International students’ course satisfaction and continuance behavioral intention in higher education setting: an empirical assessment in Malaysia. Asia Pacific Education Review, 17 (1). pp. 41-62. ISSN 1598-1037

Shahijan, Milad Kalantari and Rezaei, Sajad and Preece, Christopher Nigel (2016) Developing a framework of internationalization for higher education institutions in Malaysia: a SWOT analysis. International Journal of Management in Education, 10 (2). pp. 145-173. ISSN 1750-385X

Shamsudin, Mohd. Z. and Daud, Mohd. Y. and Mustafa, Mohd. J. A. and Arshad, Mohd. A. and Jathin, Romizan and Mahad, Mohd. S. D. (2016) Development and validation of work movement task analysis: part 2. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6574-6583. ISSN 1819-6608

Sharif, N. M. and Yusoff, N. M. and Mohd. Izhar, M. A. and Ahmad, F. and Harun, S. W. and Ahmad, H. (2016) Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers. Jurnal Teknologi, 78 (5-9). pp. 97-103. ISSN 0127-9696

Shukri, A. A. and Hosen, M. A. and Muhamad, R. and Jumaat, M. Z. (2016) Behaviour of precracked RC beams strengthened using the side-NSM technique. Construction and Building Materials, 123 . pp. 617-626. ISSN 0950-0618

Sofian, H. and Ming, J. T. C. and Noor, N. M. (2016) Detection of the lumen boundary in the coronary artery disease. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015, 19-20 Dec 2015, Dhaka, Bangladesh.

Sofian, H. and Muhammad, S. and Ming, J. T. C. and Noor, N. M. (2016) Lumen coronary artery border detection using texture and Chi-square classification. In: 2015 International Conference on Image and Vision Computing New Zealand, IVCNZ 2015, 23 November 2015 through 24 November 2015, New Zealand.

Sudiro, S. and Yusof, S. M. (2016) Measuring production floor performance using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Sudiro, S. and Yusof, S. M. and Revino, Revino (2016) Design simulation and information dashboard for manufacturing control using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kedah, Malaysia.

Tuyen, N. D. and Fujita, G. and Muhtazaruddin, M. N. B. (2016) Notch adaptive filter solution under unbalanced and/or distorted PCC voltage for 3-phase 3-wire shunt active power filter. Electrical Engineering, 98 (3). pp. 321-332. ISSN 0948-7921

Yasari, Abidulkarim K. I. and Latiff, Liza Abdul and Dziyaudin, Rudzidatul Akmam and Lilo, Moneer Ali and Aljeroudi, Yazan and Atee, Hayfaa A. (2016) Flexible online multi-objective optimization framework for ISA100.11a standard in beacon-enabled CSMA/CA mode. Computers and Electrical Engineering . ISSN 0045-7906 (In Press)

Yusof, S. M. and Aoki, K. (2016) Proposed lean sustained factors. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 - 10 Mac 2016, Kuala Lumpur, Malaysia.

Yusoff, H. H. M. and Razak, K. A. and Yuen, F. and Harun, A. and Talib, J. and Mohamad, Z. and Ramli, Z. and Razab, R. A. (2016) Mapping of post-event earthquake induced landslides in Sg. Mesilou using LiDAR. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Zainal, Nur Arifah (2016) Vendor system integration testing on mobile point-of-sales system. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Zaki, N. I. M. and Husain, M. K. A. and Shuhaimy, N. A. and Najafian, G. (2016) The effect of different methods of simulating water particle kinematics on the 100-year responses. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19 - 24 June 2016, Busan, South Korea.