Items where Year is 2016
Number of items at this level: 384. ArticleA. Aziz, Md. Maniruzzaman and Rahman, Md. Tareq and Haininl, Mohd. Rosli and Wan Abu Bakar, Wan Azelee (2016) Alternative binders for flexible pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11868-11871. ISSN 1819-6608 A. H., Nur Hidayah and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah (2016) Effect of open-graded coarse aggregate on concrete paving blocks properties for pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11836-11839. ISSN 1819-6608 Ab Halim, M. H. and Nor Anuar, A. and Abdul Jamal, N. S. and Azmi, S. I. and Ujang, Z. and Bob, M. M. (2016) Influence of high temperature on the performance of aerobic granular sludge in biological treatment of wastewater. Journal of Environmental Management, 184 . pp. 271-280. ISSN 0301-4797 Abd. Khalid, Nur Hafizah and Hussin, Mohd. Warid and Mirza, Jahangir and Ariffin, Nur Farhayu and A. Ismail, Mohamed and Lee, Han Seung and Mohamed, Azman and Putra Jaya, Ramadhansyah (2016) Palm oil fuel ash as potential green micro-filler in polymer concrete. Construction and Building Materials, 102 . ISSN 0950-0618 Abd. Samat, Roslida and Chua, Fong Teng and Mohd. Mustakim, Nur Akmal Hayati and Anuar, Fatin Izzaidah and Sa'ad, Sariffuddin (2016) Framework for evaluating lateral resistance of diagrid with base column. Malaysian Journal of Civil Engineering, 28 (2). pp. 130-139. ISSN 18237843 Abdul Awal, A. S. M. and Mariyana, A. A. K. and Hossain, M. Z. (2016) Some aspects of physical and mechanical properties of sawdust concrete. International Journal of GEOMATE, 10 (3). pp. 1918-1923. ISSN 2186-2982 Abdul Hassan, Norhidayah and Mahmud, Mohd Zul Hanif and Ahmad, Kabiru Abdullahi and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah and Mashros, Nordiana (2016) Air voids characterisation and permeability of porous asphalt gradations used in different countries. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14043-14047. ISSN 1819-6608 Abdul Hassan, Norhidayah and Mahmud, Mohd. Zul Hanif and Adi, Nurainaa and Rahmat, Noraziela and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah (2016) Effects of air voids content on the performance of porous asphalt mixtures. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11884-11887. ISSN 1819-6608 Abdullah, M. E. and Hainin, M. R. and Yusoff, N. I. Md. and Zamhari, K. A. and Hassan, N. (2016) Laboratory evaluation on the characteristics and pollutant emissions of nanoclay and chemical warm mix asphalt modified binders. Construction and Building Materials, 113 . pp. 488-497. ISSN 0950-0618 Abdullah, M. E. and Kamaruddin, N. H. M. and Daniel, B. D. and Hassan, N. A. and Hainin, M. R. and Tajudin, S. A. A. and Madun, A. and Mapanggi, R. (2016) Stiffness modulus properties of hot mix asphalt containing waste engine oil. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14089-14091. ISSN 1819-6608 Abdullah, M. E. and Zamhari, K. A. and Hainin, M. R. and Oluwasola, E. A. and Md. Yusoff, N. I. and Hassan, N. A. (2016) High temperature characteristics of warm mix asphalt mixtures with nanoclay and chemical warm mix asphalt modified binders. Journal of Cleaner Production, 122 . pp. 326-334. ISSN 0959-6526 Abdullah, N. and Fulazzaky, M. A. and Yong, E. L. and Yuzir, A. and Sallis, P. (2016) Assessing the treatment of acetaminophen-contaminated brewery wastewater by an anaerobic packed-bed reactor. Journal of Environmental Management, 168 . pp. 273-279. Abedi, M. and Fathi, M. S. and Mirasa, A. K. and Rawai, N. M. (2016) Integrated collaborative tools for precast supply chain management. Scientia Iranica, 23 (2). pp. 429-448. ISSN 1026-3098 Affam, A. C. and Chaudhuri, M. and Kutty, S. R. M. and Muda, K. (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 1944-3994 Affam, Augustine Chioma and Chaudhuri, Malay and M. Kutty, Shamsul Rahman and Muda, Khalida (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 1944-3994 Affam, Augustine Chioma and Chaudhuri, Malay and Mohamed Kutty, Shamsul Rahman and Muda, Khalida (2016) Combination of FeGAC/H2O2 advanced oxidation process and sequencing batch reactor for treatment pesticide wastewater. Environmental Earth Sciences, 75 (4). pp. 1-9. ISSN 1866-6280 Ahmad, K. A. and Abdullah, M. E. and Hassan, N. A. and Ambak, K. B. and Musbah, A. and Usman, N. and Bakar, S. K. B. A. (2016) Extraction techniques and industrial applications of jatropha curcas. Jurnal Teknologi, 78 (7-3). pp. 53-60. ISSN 0127-9696 Ahmed, Kamal and Shahid, Shamsuddin and Harun, Sobri and Wang, Xiao Jun (2016) Characterization of seasonal droughts in Balochistan Province, Pakistan. Stochastic Environmental Research and Risk Assessment, 30 (2). pp. 747-762. ISSN 1436-3240 Ahmed Nasroulla, Nazaneen and A. Rashid, Ahmad Safuan and Kalatehjari, Roohollah and Kassim, Khairul Anuar and Md. Noor, Norhazilan and Horpibulsuk, Suksun (2016) Determination of liquid limit of a low swelling clay using different cone angles. Applied Clay Science, 132 . pp. 748-752. ISSN 0169-1317 Ahmed Shourav, Md. Sabbir and Mohsenipour, Morteza and Alamgir, Mahiuddin and Pour, Sahar Hadi and Ismail, Tarmizi (2016) Historical trends and future projection of climate at Dhaka city of Bangladesh. Jurnal Teknologi, 78 (6-12). pp. 69-75. ISSN 0127-9696 Al-Abadi, Alaa M. and Shahid, Shamsuddin and Al-Ali, Ali K. (2016) A GIS-based integration of catastrophe theory and analytical hierarchy process for mapping flood susceptibility: a case study of Teeb area, Southern Iraq. Environmental Earth Sciences, 75 (8). ISSN 1866-6280 Alahmadi, F. and Abd. Rahman, N. and Yusop, Z. (2016) Hydrological modelling of ungauged arid volcanic environments at upper Bathan catchment, Madinah, Saudi Arabia. Jurnal Teknologi, 78 (9-4). pp. 9-14. ISSN 0127-9696 Alavi Nezhad Khalil Abad, Seyed Vahid and Yilmaz, Murat and Jahed Armaghani, Danial and Tugrul, Atiye (2016) Prediction of the durability of limestone aggregates using computational techniques. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press) Albrka Ali, Shaban Imael and Ismail, Amiruddin and Md. Yusoff, Nur Izzi and Abdul Hassan, Norhidayah and Ibrahim, Ahmad Nazrul Hakimi (2016) Characterization of the performance of aluminum oxide nanoparticles modified asphalt binder. Jurnal Teknologi, 78 (4). pp. 91-96. ISSN 0127-9696 Alhamali, Dhawo Ibrahim and Wu, Jiantao and Liu, Quan and Abdul Hassan, Norhidayah and Md. Yusoff, Nur Izzi and Albrka Ali, Shaban Ismael (2016) Physical and rheological characteristics of polymer modified bitumen with nanosilica particles. Arabian Journal for Science and Engineering, 41 (4). pp. 1521-1530. ISSN 1319-8025 Alhassan, Hashim Mohammed and Mashros, Nordiana (2016) Characterisation and modelling of pedestrian flows in hospital and academic environments. Jurnal Teknologi, 78 (4). pp. 49-57. ISSN 0127-9696 Ali, M. K. F. B. M. and Noor, N. M. and Yahaya, N. and Bakar, A. A. and Abdullah, A. and Masuri, M. A. and Ismail, M. (2016) Application of ultraviolet radiation to control microbiologically influenced corrosion: a case study on soil sample from mangrove. Journal of Engineering Science and Technology, 11 (12). pp. 1695-1704. ISSN 1823-4690 Alias, Nor Eliza and Mohamad, Hazim and Chin, Wan Yoke and Yusop, Zulkifli (2016) Rainfall analysis of the Kelantan big yellow flood 2014. Jurnal Teknologi, 78 (9-4). pp. 83-90. ISSN 0127-9696 Alimohammadi, Payman and Kassim, Khairul Anuar and Nazir, Ramli (2016) Behaviour of expanded piles under upward loading due to radial preloading in soft clay. Arabian Journal of Geosciences, 9 (2). pp. 1-12. ISSN 1866-7511 Amaludin, A. and Marto, A. and Satar, M. H. M. and Amaludin, H. and Dullah, S. (2016) Thermal properties of Malaysian cohesive soils. Jurnal Teknologi, 78 (8-5). pp. 53-58. ISSN 0127-9696 Andalib, R. and Abd. Majid, M. Z. and Hussin, M. W. and Ponraj, M. and Keyvanfar, A. and Mirza, J. and Lee, H. S. (2016) Optimum concentration of Bacillus megaterium for strengthening structural concrete. Construction and Building Materials, 118 . pp. 180-193. ISSN 0950-0618 Ariffin, Aqbal Hafeez and Solah, Mohd. Syazwan and Hamzah, Azhar and Md. Isa, Mohd. Hafzi and Mohd. Jawi, Zulhaidi and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) Exploratory study on airbag suitability for low engine capacity motorcycles. Jurnal Teknologi, 78 (4). pp. 65-69. ISSN 0127-9696 Armaghani, D. J. and Mahdiyar, A. and Hasanipanah, M. and Faradonbeh, R. S. and Khandelwal, M. and Amnieh, H. B. (2016) Risk assessment and prediction of flyrock distance by combined multiple regression analysis and Monte Carlo simulation of quarry blasting. Rock Mechanics and Rock Engineering, 49 (9). pp. 3631-3641. ISSN 0723-2632 Armaghani, Danial Jahed and Faradonbeh, Roohollah Shirani and Rezaei, Hossein and A. Rashid, Ahmad Safuan and Amnieh, Hassan Bakhshandeh (2016) Settlement prediction of the rock-socketed piles through a new technique based on gene expression programming. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press) Armaghani, Danial Jahed and Hasanipanah, Mahdi and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Feasibility of ICA in approximating ground vibration resulting from mine blasting. Neural Computing and Applications . pp. 1-9. ISSN 0941-0643 (In Press) Armaghani, Danial Jahed and Mohamad, Edy Tonnizam and Hajihassani, Mohsen and Yagiz, Saffet and Motaghedi, Hossein (2016) Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances. Engineering with Computers, 32 (2). pp. 189-206. Arshad, Arshad and Abdullah, R. A. (2016) A review on selection of tunneling method and parameters effecting ground settlements. Electronic Journal of Geotechnical Engineering, 21 (14). pp. 4459-4475. ISSN 1089-3032 Assadi, M.K. and Zahraee, S.M. and Isaabadi, Mohammad Hossein Zaeimbashi and Habib, K. (2016) Evaluating different scenarios for optimizing energy consumption to achieve sustainable green building in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12112-12116. ISSN 1819-6608 Azahar, W. N. A. W. and Bujang, M. and Jaya, R. P. and Hainin, M. R. and Ngadi, N. and Abdullah, M. M. A. B. (2016) Performance of waste cooking oil in asphalt binder modification. Key Engineering Materials, 700 . pp. 216-226. ISSN 1013-9826 Azahar, W. N. A. W. and Bujang, M. and Jaya, R. P. and Hainin, M. R. and Ngadi, N. and Mohamad, M. (2016) Chemical identification of waste cooking oil as additive in Bitumen. Key Engineering Materials, 700 . pp. 207-215. ISSN 1013-9826 Azimi, M. and Bagherpourhamedani, A. and Md. Tahir, M. and Sam, A. R. B. M. and Ma, C. K. (2016) Evaluation of new spiral shear reinforcement pattern for reinforced concrete joints subjected to cyclic loading. Advances in Structural Engineering, 19 (5). pp. 730-745. ISSN 1369-4332 Azizan, N. A. and Kamaruddin, S. A. and Chelliapan, S. (2016) Simulation of dense non-aqueous phase liquid remediation through steam-enhanced extraction. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3731-3739. ISSN 1819-6608 Azizan, Nor Asni and Kamaruddin, Samira Albati and Chelliapan, Shreeshivadasan (2016) Simulation of dense non-aqueous phase liquid remediation through steam-enhanced extraction. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3731-3739. ISSN 1819-6608 Babashamsi, Peyman and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) The effect of preservation maintenance activities in asphalt concrete pavement sustainability. Jurnal Teknologi, 78 (4). pp. 117-124. ISSN 0127-9696 Baharuddin, Nur Khaida and Nazri, Fadzli Mohamed and Jaya, Ramadhansyah Putra and Abu Bakar, Badorul Hisyam (2016) Evaluation of bond strength between fire-damaged normal concrete substance and ultra-high-performance fiber-reinforced concrete as a repair material. World Journal of Engineering, 13 (5). pp. 461-466. ISSN 1708-5284 Baharudin, N. H. and Kasa, A. and Chik, Z. and Taha, M. R. and Adnan, A. (2016) Correlation between peak ground acceleration and strength parameters of residual soil. International Journal of Applied Engineering Research, 11 (9). pp. 6757-6759. ISSN 0973-4562 Balakrishnan, Balamohan and Abdul Awal, A. S. M. (2016) Mechanical properties and thermal resistance of high volume fly ash concrete for energy efficiency in building construction. Key Engineering Materials, 678 . pp. 99-108. ISSN 1013-9826 Bejarbaneh, Behnam Yazdani and Bejarbaneh, Elham Yazdani and Amin, Mohd. For Mohd. and Fahimifar, Ahmad and Jahed Armaghani, Danial and Majid, Muhd. Zaimi Abd. (2016) Intelligent modelling of sandstone deformation behaviour using fuzzy logic and neural network systems. Bulletin of Engineering Geology and the Environment . pp. 1-17. ISSN 1435-9529 (In Press) Beringer, J. and Hutley, L. B. and McHugh, I. and Arndt, S. K. and Campbell, D. and Cleugh, H. A. and Cleverly, J. and De Dios, V. R. and Eamus, D. and Evans, B. and Ewenz, C. and Grace, P. and Griebel, A. and Haverd, V. and Hinko Najera, N. and Huete, A. and Isaac, P. and Kanniah, K. and Leuning, R. and Liddell, M. J. and MacFarlane, C. and Meyer, W. and Moore, C. and Pendall, E. and Phillips, A. and Phillips, R. L. and Prober, S. M. and Restrepo Coupe, N. and Rutledge, S. and Schroder, I. and Silberstein, R. and Southall, P. and Sun Yee, M. and Tapper, N. J. and Van Gorsel, E. and Vote, C. and Walker, J. and Wardlaw, T. (2016) An introduction to the Australian and New Zealand flux tower network OzFlux. Biogeosciences, 13 (21). 5895 5916. ISSN 1726-4170 Bob, Mustafa and Rahman, Norhan and Elamin, Abdalla and Taher, Saud (2016) Rising groundwater levels problem in urban areas: a case study from the central area of Madinah City, Saudi Arabia. Arabian Journal for Science and Engineering, 41 (4). pp. 1461-1472. ISSN 1319-8025 Borghei, S. M. and Nekooie, M. A. and Sadeghian, H. and Ghazizadeh, M. R. J. and Parvaneh, A. and Yang, J. and Javaheri, A. and Kabiri-Samani, A. (2016) Discussion: triangular labyrinth side weirs with one and two cycles. Proceedings of the Institution of Civil Engineers: Water Management, 169 (3). pp. 111-114. ISSN 1741-7589 Bunawan, Aliff Ridzuan and Mahin, Mohd. Azrul Hisham and Hezmi, Muhammad Azril and Kassim, Azman and A. Rashid, Ahmad Safuan (2016) Development of slope monitoring device using accelerometer. Jurnal Teknologi, 78 (8-5). pp. 59-65. ISSN 0127-9696 Bunawan, Aliff Ridzuan and Mahin, Mohd. Azrul Hisham and Hezmi, Muhammad Azril and Kassim, Azman and A. Rashid, Ahmad Safuan (2016) Development of slope monitoring device using accelerometer. Jurnal Teknologi, 78 (8-5). pp. 59-65. ISSN 0127-9696 Danial, O. and Salim, M. R. and Salmiati, Salmiati (2016) Nutrient removal of grey water from wet market using sequencing batch reactor [Penyingkiran nutrien air basuhan dari pasar basah mengguna reaktor kelompok urutan]. Malaysian Journal Of Analytical Sciences, 20 (1). pp. 142-148. ISSN 1394-2506 Darwish, Mohamad and Aris, Azmi and Puteh, Mohd. Hafiz and Abideen, Muzaffar Zainal and Othman, Mohd. Nor (2016) Ammonium-nitrogen recovery from wastewater by struvite crystallization technology. Separation and Purification Reviews, 45 (4). pp. 261-274. Ebrahimi, Ebrahim and Monjezi, Masoud and Khalesi, Mohammad Reza and Armaghani, Danial Jahed (2016) Prediction and optimization of back-break and rock fragmentation using an artificial neural network and a bee colony algorithm. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 27-36. ISSN 1435-9529 Egba, E. I. and Bakhary, N. and Ismail, M. (2016) Influence of natural climate curing treatment on corrosion activity of reinforced concrete. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846 Faradonbeh, R. S. and Armaghani, D. J. and Monjezi, M. and Mohamad, E. T. (2016) Genetic programming and gene expression programming for flyrock assessment due to mine blasting. International Journal of Rock Mechanics and Mining Sciences, 88 . pp. 254-264. ISSN 1365-1609 Faradonbeh, R. S. and Jahed Armaghani, D. and Monjezi, M. (2016) Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique. Bulletin of Engineering Geology and the Environment, 75 (3). pp. 993-1006. ISSN 1435-9529 Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Prediction and minimization of blast-induced flyrock using gene expression programming and firefly algorithm. Neural Computing and Applications . pp. 1-13. ISSN 0941-0643 (In Press) Faridmehr, I. and Osman, M. H. and Tahir, M. M. and Azimi, M. and Gholami, M. (2016) Behaviour and design of cold-formed steel C-sections with cover plates under bending. International Journal of Steel Structures, 16 (2). pp. 587-600. ISSN 1598-2351 Faridmehr, Iman and Ahmad, Yusof and Md. Tahir, Mahmood and Osman, Mohd. Hanim (2016) Cyclic and explosive evaluation of new proposed steel joint. Advances in Civil Engineering, 2016 . pp. 1-11. ISSN 16878-086 Faridmehr, Iman and Osman, Mohd. Hanim and Tahir, Mahmood Md. and Razavykia, Abbas and Nejad, Ali Farokhi (2016) Effect of web holes and bearing stiffeners on flexural-shear interaction strength of steel cold-formed C-channel sections. Latin American Journal of Solids and Structures, 13 (6). pp. 1152-1166. ISSN 1679-7817 Fateh, Amir and Hejazi, Farzad and Jaafar, Mohd. Saleh and Abd. Karim, Izian and Adnan, Azlan (2016) Design of a variable stiffness bracing system: mathematical modeling, fabrication, and dynamic analysis. Soil Dynamics and Earthquake Engineering, 80 . pp. 87-101. ISSN 0267-7261 Firmawan, Ferry and Othman, Fadil and Yahya, Khairulzan and Haron, Zaiton (2016) The green construction site index (GCSI): a quantitative tool used to assess an ongoing project to meet the green construction concept. International Journal of Technology, 7 (4). pp. 530-543. ISSN 2086-9614 Fulazzaky, M. A. and Abdullah, S. and Salim, M. R. (2016) Supporting data for identification of biosurfactant-producing bacteria isolated from agro-food industrial effluent. Data in Brief, 7 . pp. 834-838. ISSN 2352-3409 Fulazzaky, M. A. and Talaiekhozani, A. and Abd. Majid, M. Z. (2016) Formaldehyde removal mechanisms in a biotrickling filter reactor. Ecological Engineering, 90 . pp. 77-81. ISSN 0925-8574 Ghasan, Fahim Huseien and Mirza, Jahangir and Ismail, Mohammad and Hussin, Mohd Warid (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618 Gholami, M. and Mohd Sam, A. R. and Marsono, A. K. and Tahir, M. M. and Faridmehr, I. (2016) Performance of steel beams strengthened with pultruded CFRP plate under various exposures. Steel and Composite Structures, 20 (5). pp. 999-1022. ISSN 1229-9367 Goh, Wan Inn and Mohamad, Noridah and Abdullah, Redzuan and Abdul Samad, Abdul Aziz (2016) Overview of empirical equation prediction for ultimate axial load of precast lightweight foamed concrete sandwich panel (PLFP). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2366-2371. ISSN 1819-6608 Gordan, B. and Jahed Armaghani, D. and Hajihassani, M. and Monjezi, M. (2016) Prediction of seismic slope stability through combination of particle swarm optimization and neural network. Engineering with Computers, 32 (1). pp. 85-97. ISSN 0177-0667 Hadipour, Sahar and Harun, Sobri and Arefnia, Ali and Alamgir, Mahiuddin (2016) Transfer function models for statistical downscaling of monthly precipitation. Jurnal Teknologi, 78 (9-4). pp. 55-62. ISSN 0127-9696 Hafezolghorani Esfahani, M. and Hejazi, F. and Vaghei, R. and Nikbakht, E. and Tze, D. C. J. (2016) Development of constitutive model for precast prestressed concrete segmental columns. Modelling and Simulation in Engineering, 2016 . ISSN 1687-5591 Hainin, Mohd. Rosli and Oluwasola, Ebenezer and Brown, E. Ray (2016) Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness. Construction and Building Materials, 121 . pp. 265-277. ISSN 0950-0618 Hainin, Mohd. Rosli and Oluwasola, Ebenezer Akin and A. Aziz, Md. Maniruzzaman and Yeroc, Suleiman Arafat (2016) Effect of moisture damage on gap-graded asphalt mixture incorporating electric arc furnace steel slag and copper mine tailings. Jurnal Teknologi, 78 (42554). pp. 1-9. ISSN 0127-9696 Hamzah, A. F. and Ibrahim, M. H. W. and Jamaluddin, N. and Jaya, R. P. and Arshad, M. F. and Zainal Abidin, N. E. and Manan, E. A. and Omar, N. A. (2016) Nomograph of self-compacting concrete mix design incorporating coal bottom ash as partial replacement of fine aggregates. Journal Of Engineering And Applied Sciences, 11 (7). pp. 1671-1675. ISSN 1816-949X Hasan, M. and Alrubaye, A. J. and Seng, L. K. and Ideris, M. S. and Marto, A. (2016) Undrained shear strength of soft clay mixed with different percentages of lime and silica fume. Jurnal Teknologi, 78 (8-5). pp. 23-30. ISSN 0127-9696 Hasan, M. A. F. M. R. and Keramat, M. M. and Shahid, S. and Yasmin, R. and Mohsenipour, M. and Sattar, G. S. (2016) Evaluation of subsurface lithologic units for groundwater exploration in the Barind Tract of Bangladesh. Geotechnical and Geological Engineering, 34 (5). pp. 1395-1411. ISSN 0960-3182 Hasanipanah, M. and Jahed Armaghani, D. and Khamesi, H. and Bakhshandeh Amnieh, H. and Ghoraba, S. (2016) Several non-linear models in estimating air-overpressure resulting from mine blasting. Engineering with Computers, 32 (3). pp. 441-455. ISSN 0177-0667 Hasanipanah, Mahdi and Jahed Armaghani, Danial and Bakhshandeh Amnieh, Hassan and Majid, Muhd. Zaimi Abd. and Tahir, Mahmood Md. (2016) Application of PSO to develop a powerful equation for prediction of flyrock due to blasting. Neural Computing and Applications . pp. 1-8. ISSN 0941-0643 (In Press) Hashim, Wardati and Hainin, Mohd. Rosli and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi and Abdullah, Mohd. Ezree and Abdul Hassan, Norhidayah (2016) Evaluating the cooling rate of hot mix asphalt in tropical climate. Jurnal Teknologi, 78 (4). pp. 97-104. ISSN 0127-9696 Hassan, M. A. H. M. and Muda, K. and Toemen, S. and Yusof, N. Z. and Anuar, A. N. and Elias, S. H. and Othman, M. N. and Mohd. Said, M. I. and Mohamad, M. and Affam, A. C. (2016) Rhizofiltration for the enhancement of biofuel production. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2426-2433. ISSN 1819-6608 Hassan, Sitti Asmah and Wong, Lavine and Mashros, Nordiana and Mohammed Alhassan, Hashim and Abdul Sukor, Nur Sabahiah and Rohani, Munzilah and Minhans, Anil (2016) Operating speed of vehicles during rainfall at night: case study in Pontian, Johor. Jurnal Teknologi, 78 (7-2). pp. 9-18. ISSN 0127-9696 Hosseini, Seyed Jamal Aldin and Abd. Rahman, Ahmad Baharuddin (2016) Effects of spiral confinement to the bond behavior of deformed reinforcement bars subjected to axial tension. Engineering Structures, 112 . pp. 1-13. ISSN 0141-0296 Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Gani, Paran (2016) Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique. Journal of Asian Ceramic Societies, 4 (2). pp. 164-177. ISSN 2187-0764 Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618 (In Press) Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. and Ariffin, M. A. M. (2016) Potential use coconut milk as alternative to alkali solution for geopolymer production. Jurnal Teknologi, 78 (11). pp. 133-139. ISSN 0127-9696 Huseien, Ghasan Fahim and Mirza, Jahangir and Ismail, Mohammad and Ghoshal, Sib Krishna and Ariffin, Mohd. Azreen Mohd. (2016) Effect of metakaolin replaced granulated blast furnace slag on fresh and early strength properties of geopolymer mortar. Ain Shams Engineering Journal . ISSN 2090-4479 (In Press) Ibrahim, I. S. and Elliott, K. S. and Abdullah, R. and Kueh, A. B. H. and Sarbini, N. N. (2016) Experimental study on the shear behaviour of precast concrete hollow core slabs with concrete topping. Engineering Structures, 125 . pp. 80-90. ISSN 0141-0296 Ibrahim, Muttaka Na and Che Puan, Othman and Mustaffar, Mushairry (2016) Spatial evaluation of speed-flow-geometry relationship on two-lane rural highways. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11877-11883. ISSN 1819-6608 Ishak, Mohd. Fakhrurrazi and Nazri, Ali and Kassim, Azman (2016) Tree induced suction on slope stabilization analysis. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7204-7208. ISSN 1819-6608 Ismail, M. and Yew, C. K. and Muhammad, B. (2016) Life-span prediction of abandoned reinforced concrete residential buildings. Construction and Building Materials, 112 . pp. 1059-1065. ISSN 0950-0618 Ismail, Mohammad and Noruzman, Ainul Haezah and Bhutta, Muhammad Aamer Rafique and Yusuf, Taliat Ola and Ogiri, Ibrahim Hassan (2016) Effect of vinyl acetate effluent in reducing heat of hydration of concrete. Ksce Journal of Civil Engineering, 20 (1). pp. 145-151. ISSN 1226-7988 Jahed Armaghani, D. and Hasanipanah, M. and Mahdiyar, A. and Abd. Majid, M. Z. and Bakhshandeh Amnieh, H. and Tahir, M. M. D. (2016) Airblast prediction through a hybrid genetic algorithm-ANN model. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press) Jahed Armaghani, D. and Mohd. Amin, M. F. and Yagiz, S. and Faradonbeh, R. S. and Abdullah, R. A. (2016) Prediction of the uniaxial compressive strength of sandstone using various modeling techniques. International Journal of Rock Mechanics and Mining Sciences, 85 . pp. 174-186. ISSN 1365-1609 Jajarmizadeh, M. and Sidek, L. M. and Mirzai, M. and Alaghmand, S. and Harun, S. and Majid, M. R. (2016) Prediction of surface flow by forcing of climate forecast system reanalysis data. Water Resources Management, 30 (8). pp. 2627-2640. ISSN 0920-4741 Jarial, Rini and Shard, A. and Thakur, Sveta and Sakinah, Abdul Munaim and Zularisam, Abd. Wahid and Rezania, Shahabaldin and Kanwar, Shamsher Singh and Singh, Lakhveer (2016) Characterization of flavonoids from fern Cheilanthes tenuifolia and evaluation of antioxidant, antimicrobial and anticancer activities. Journal of King Saud University - Science . ISSN 1018-3647 (In Press) Jayanti, D. S. and Mirza, J. and Jaya, R. P. and Abu Bakar, B. H. and Hassan, N. A. and Hainin, M. R. (2016) Chloride penetration of RHA concrete under marine environment. Proceedings of the Institution of Civil Engineers: Maritime Engineering, 169 (2). pp. 76-85. ISSN 1741-7597 Jeffry, S. N. A. and Jaya, R. P. and Manap, N. and Miron, N. A. and Hassan, N. A. (2016) The influence of coconut shell as coarse aggregates in asphalt mixture. Key Engineering Materials, 700 . pp. 227-237. ISSN 1013-9826 Jumain, M. and Ibrahim, Z. and Ismail, Z. and Makhtar, M. R. and Rahman, M. S. A. and Miran, N. S. and Khairi, S. S. M. (2016) Fluvial processes in compound straight channels: a laboratory investigation. Jurnal Teknologi, 78 (7). pp. 141-148. ISSN 0127-9696 Jumain, M. and Ibrahim, Z. and Ismail, Z. and Samsudin, M. F. and Anuar, M. Z. T. and Harun, S. and Makhtar, M. R. and Rahman, M. S. A. (2016) Flood flow characteristics and bed load transport in non-vegetated compound straight channels. Jurnal Teknologi, 78 (9-4). pp. 1-8. ISSN 0127-9696 Kamyab, H. and Din, M. F. M. and Hosseini, S. E. and Ghoshal, S. K. and Ashokkumar, V. and Keyvanfar, A. and Shafaghat, A. and Lee, C. T. and Bavafa, A. and Majid, M. Z. A. (2016) Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate. Clean Technologies and Environmental Policy, 18 (8). pp. 2513-2523. ISSN 1618-954X Kamyab, H. and Din, M. F. M. and Ghoshal, S. K. and Lee, C. T. and Keyvanfar, A. and Bavafa, A. A. and Rezania, S. and Lim, J. S. (2016) Chlorella pyrenoidosa mediated lipid production using Malaysian agricultural wastewater: effects of photon and carbon. Waste and Biomass Valorization, 7 (4). pp. 779-788. ISSN 1877-2641 Kassim, Khairul Anuar and A. Rashid, Ahmad Safuan and Kueh, Ahmad Beng Hong and Yah, Chong Siaw and Siang, Lam Chee (2016) Criteria of acceptance for constant rate of strain consolidation test for tropical cohesive soil. Geotechnical and Geological Engineering, 34 (4). pp. 931-947. ISSN 0960-3182 Kebria, D. Y. and Taghizadeh, M. and Camacho, J. V. and Latifi, N. (2016) Remediation of PCE contaminated clay soil by coupling electrokinetics with zero-valent iron permeable reactive barrier. Environmental Earth Sciences, 75 (8). ISSN 1866-6280 Khan, M. M. H. and Guong Wei, L. and Deepak, T. J. and Nair, S. (2016) Use of oil palm shell as replacement of coarse aggregate for investigating properties of concrete. International Journal of Applied Engineering Research, 11 (4). pp. 2379-2383. ISSN 0973-4562 Khandelwal, M. and Armaghani, D. J. (2016) Prediction of drillability of rocks with strength properties using a hybrid GA-ANN technique. Geotechnical and Geological Engineering, 34 (2). pp. 605-620. ISSN 0960-3182 Khandelwal, M. and Armaghani, D. J. and Faradonbeh, R. S. and Ranjith, P. G. and Ghoraba, S. (2016) A new model based on gene expression programming to estimate air flow in a single rock joint. Environmental Earth Sciences, 75 (9). ISSN 1866-6280 Khandelwal, Manoj and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Majid, Muhd Zaimi Abd. and Monjezi, Masoud (2016) Function finding for indirect determination of rock brittleness based on genetic programming and non-linear multiple regression models. Engineering with Computers . pp. 1-9. ISSN 0177-0667 (In Press) Khankhaje, E. and Salim, M. R. and Mirza, J. and Hussin, M. W. and Rafieizonooz, M. (2016) Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate. Construction and Building Materials, 126 . pp. 1054-1065. ISSN 0950-0618 Khankhaje, Elnaz and Hussin, Mohd. Warid and Mirza, Jahangir and Rafieizonooz, Mandi and Salim, Mohd. Razman and Siong, Ho Chin and Mohd. Warid, Muhammad Naqiuddin (2016) On blended cement and geopolymer concretes containing palm oil fuel ash. Materials & Design, 89 . pp. 385-398. ISSN 0264-1275 Khezri, N. and Mohamad, H. and Fatahi, B. (2016) Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis. Geomechanics and Engineering, 11 (4). pp. 471-492. ISSN 2005-307X Kibria, Mahmud Arman and Rahman, Saidur and Al-Sulaiman, Fahad A. and A. Aziz, Md. Maniruzzaman (2016) Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings. Solar Energy, 124 . pp. 114-123. ISSN 0038-092X Kim, S. J. and Kim, J. H. J. and Yi, S. T. and Md. Noor, N. B. and Kim, S. C. (2016) Structural performance evaluation of a precast PSC curved girder bridge constructed using multi-tasking formwork. International Journal of Concrete Structures and Materials, 10 . ISSN 2234-1315 Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, Mimi Sakinah and Thakur, Sveta and A. Wahid, Zularisam and Sohaili, Johan (2016) Effect of organic loading rate on hydrogen (H2) and methane (CH4) production in two-stage fermentation under thermophilic conditions using palm oil mill effluent (POME). Energy for Sustainable Development, 34 . pp. 130-138. ISSN 0973-0826 Kristanti, R. A. and Fikri Ahmad Zubir, M. M. and Hadibarata, T. (2016) Biotransformation studies of cresol red by Absidia spinosa M15. Journal of Environmental Management, 172 . pp. 107-111. ISSN 0301-4797 Kristanti, R. A. and Kamisan, M. K. A. and Hadibarata, T. (2016) Treatability of methylene blue solution by adsorption process using neobalanocarpus hepmii and capsicum annuum. Water, Air, and Soil Pollution, 227 (5). ISSN 0049-6979 Lamide, J. A. and Mohamed, R. N. and Abd. Rahman, A. B. (2016) Experimental results on the shear behaviour of steel fibre self-compacting concrete (SFSCC) beams. Jurnal Teknologi, 78 (11). pp. 103-111. ISSN 0127-9696 Latifi, N. and Horpibulsuk, S. and Meehan, C. L. and Majid, M. Z. A. and Rashid, A. S. A. (2016) Xanthan gum biopolymer: an eco-friendly additive for stabilization of tropical organic peat. Environmental Earth Sciences, 75 (9). ISSN 1866-6280 Latifi, N. and Marto, A. and Eisazadeh, A. (2016) Experimental investigations on behaviour of strip footing placed on chemically stabilised backfills and flexible retaining walls. Arabian Journal for Science and Engineering, 41 (10). pp. 4115-4126. ISSN 1319-8025 Latifi, N. and Meehan, C. L. and Majid, M. Z. A. and Horpibulsuk, S. (2016) Strengthening montmorillonitic and kaolinitic clays using a calcium based non traditional additive: a micro level study. Applied Clay Science, 132-32 . pp. 182-193. ISSN 0169-1317 Latifi, N. and Rashid, A. S. A. and Siddiqua, S. and Majid, M. Z. A. (2016) Strength measurement and textural characteristics of tropical residual soil stabilised with liquid polymer. Measurement: Journal of the International Measurement Confederation, 91 . pp. 46-54. ISSN 0263-2241 Latifi, Nima and A. Rashid, Ahmad Safuan and Marto, Aminaton and Md. Tahir, Mahmood (2016) Effect of magnesium chloride solution on the physico-chemical characteristics of tropical peat. Environmental Earth Sciences, 75 (3). pp. 1-9. ISSN 1866-6280 Latifi, Nima and Marto, Aminaton and Eisazadeh, Amin (2016) Physicochemical behavior of tropical laterite soil stabilized with non-traditional additive. Acta Geotechnica, 11 (2). pp. 433-443. ISSN 1861-1125 Lawan, Mustapha Muhammad and Md. Tahir, Mahmood and Mirza, Jahangir (2016) Bolted shear connectors performance in self-compacting concrete integrated with cold-formed steel section. Latin American Journal of Solids and Structures, 13 (4). pp. 731-749. ISSN 1679-7817 Lazim, Z. M. and Hadibarata, T. (2016) Ligninolytic fungus Polyporus sp. S133 mediated metabolic degradation of fluorene. Brazilian Journal of Microbiology, 47 (3). pp. 610-616. ISSN 1517-8382 Lee, H. P. and Awang, A. Z. and Omar, W. (2016) Short term durability of steel-strap confined concrete. Jurnal Teknologi, 78 (7). pp. 99-106. ISSN 0127-9696 Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2016) Short term durability of SSTT confined high strength concrete. Jurnal Teknologi, 78 (7). pp. 99-106. ISSN 0127-9696 Lee, Mei Jiun and Ong, Chi Siang and Lau, Woei Jye and Ng, Be Cheer and Ismail, Ahmad Fauzi and Lai, Soon Onn (2016) Degradation of PVDF-based composite membrane and its impacts on membrane intrinsic and separation properties. Journal of Polymer Engineering, 36 (3). pp. 261-268. ISSN 0334-6447 Liang, Maybelle and Mohamad, Edy Tonnizam and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Ghoraba, Saber (2016) Rock strength assessment based on regression tree technique. Engineering with Computers, 32 (2). pp. 343-354. ISSN 0177-0667 Liew, W. L. and Kassim, M. A. and Muda, K. and Loh, S. K. (2016) Feasibility study on palm oil processing wastes towards achieving zero discharge. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2400-2405. ISSN 1819-6608 Ling, J. H. and Abd. Rahman, A. B. and Ibrahim, I. S. and Abdul Hamid, Z. (2016) Tensile capacity of grouted splice sleeves. Engineering Structures, 111 . pp. 285-296. ISSN 0141-0296 Ling, L. and Yusop, Z. (2016) Mean, median or something else. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9706-9711. ISSN 1819-6608 Ma, C. K. and Awang, A. Z. and Garcia, R. and Omar, W. and Pilakoutas, K. (2016) Behaviour of over-reinforced high-strength concrete beams confined with post-tensioned steel straps - an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. ISSN 1464-4177 Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2016) Flexural ductility design of confined high-strength concrete columns: theoretical modelling. Measurement: Journal of the International Measurement Confederation, 78 . pp. 42-48. ISSN 0263-2241 Mahapatra, Geetimukta and Maurya, Akhilesh Kumar and Minhans, Anil (2016) Lateral movement of vehicles under weak-lane discipline heterogeneous traffic. Jurnal Teknologi, 78 (4). pp. 27-35. ISSN 0127-9696 Mahjoub, R. and Yatim, J. M. and Sam, A. M. and Zulkarnain, N. A. and Raftari, M. (2016) The Use of kenaf Fiber Reinforced Polymer to confine the concrete cylinder. Materials Today: Proceedings, 3 (2). pp. 459-463. ISSN 2214-7853 Majidnia, Z. and Fulazzaky, M. A. (2016) Photoreduction of Pb(II) ions from aqueous solution by titania polyvinylalcohol–alginate beads. Journal of the Taiwan Institute of Chemical Engineers, 66 . pp. 88-96. ISSN 1876-1070 Maniruzzaman, M. A. A. and Rahman, M. T. and Rosli Haininl, M. and Abu, W. A. W. B. (2016) Alternative binders for flexible pavement. ARPN Journal Of Engineering and Applied Sciences, 11 (20). pp. 11868-11871. Mansouri, I. and Safa, M. and Ibrahim, Z. and Kisi, O. and Tahir, M. M. and Baharom, S. and Azimi, M. (2016) Strength prediction of rotary brace damper using MLR and MARS. Structural Engineering and Mechanics, 60 (3). pp. 471-488. ISSN 1225-4568 Marsono, A. K. and Hatami, S. (2016) Analysis of reinforced concrete shear walls with single band of octagonal openings. KSCE Journal of Civil Engineering, 20 (5). pp. 1887-1894. Marto, Aminaton and Nor, Aidil Rosly and Choy, Soon Tan and Kasim, Fauziah and Mohd. Yunus, Nor Zurairahetty and Moradi, Razieh (2016) Bearing capacity of soft clay installd with singular and group of encased bottom ash columns. Jurnal Teknologi, 78 (7-3). pp. 105-110. ISSN 2180-3722 Marto, Aminaton and Tan, Choy Soon (2016) Properties of coal bottom ash from power plants in Malaysia and its suitability as geotechnical engineering material. Jurnal Teknologi, 78 (8-5). pp. 1-10. ISSN 2180-3722 Marto, Aminaton and Tan, Choy Soon and Makhtar, Ahmad Mahir and Jusoh, Siti Norafida (2016) Cyclic behaviour of Johor sand. International Journal of Geomate, 10 (3). pp. 1891-1898. ISSN 21862-982 Md Dana, Mohd. Firdaus and Mohamad, Edy Tonnizam and Komoo, Ibrahim (2016) Characteristics of boulders formed in tropical weathered granite: a review. Jurnal Teknologi, 78 (8-6). pp. 23-30. ISSN 01279696 Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Low, Wen Pei and Fulazzaky, Mohamad Ali and Iwao, Kenzo and Songip, Ahmad Rahman and Chelliapan, Shreeshivadasan and Ismail, Zulhilmi and Jamal, Mohamad Hidayat (2016) Removal rate of organic matter using natural cellulose via adsorption isotherm and kinetic studies. Water Environment Research, 88 (2). pp. 118-130. ISSN 1061-4303 Mohamad, Edy Tonnizam and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Monjezi, Masoud and Majid, Muhd. Zaimi Abd. (2016) An optimized ANN model based on genetic algorithm for predicting ripping production. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press) Mohamad, Edy Tonnizam and Latifi, Nima and Arefnia, Ali and Md. Isa, Mohamed Fauzi (2016) Effects of moisture content on the strength of tropically weathered granite from Malaysia. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 369-390. ISSN 1435-9529 Mohamad, Edy Tonnizam and Murlidhar, Bhatawdekar Ramesh and Armaghani, Danial Jahed and Saad, Rosli and Yi, Chang Shiang (2016) Effect of geological structure and blasting practice in fly rock accident at Johor, Malaysia. Jurnal Teknologi, 78 (8-6). pp. 15-21. ISSN 0127-9696 Mohamad, H. and Tee, B. P. and Ang, K. A. and Chong, M. F. (2016) Characterizing anomalies in distributed strain measurements of cast-in-situ bored piles. Jurnal Teknologi, 78 (8-5). pp. 75-82. ISSN 0127-9696 Mohamad, Izni Izzati and Mohd. Yunus, Mohd. Zulkifli and Ahmad, Fatimah Shafinaz (2016) Landfill site selection by integrating analytical hierarchy process and geographic information system. Malaysian Journal Of Civil Engineering - MJCE, 28 (SINO.3). pp. 180-191. ISSN 1823-7843 Mohamed, Azman and A.Khalid, Nur Hafizah and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Jaya, Ramadhansyah Putra and Mohd. Sam, Abdul Rahman and Ismail, Che Ros (2016) Determination of groove and mechanical properties of underside shaped concrete paver. Jurnal Teknologi, 78 (4). pp. 79-83. ISSN 0127-9696 Mohamed Abdullah, N. A. and Abdul Hassan, N. and Mohd. Shukry, N. A. and Mahmud, M. Z. H. and Putrajaya, R. and Hainin, M. R. and Md. Yusoff, N. I. (2016) Evaluating potential of diatomite as anti clogging agent for porous asphalt mixture. Jurnal Teknologi, 78 (7-2). pp. 105-111. ISSN 0127-9696 Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317. ISSN 1944-3994 Mohammadhosseini, H. and Abdul Awal, A. S. M. and Sam, A. R. M. (2016) Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sadhana - Academy Proceedings in Engineering Sciences, 41 (10). pp. 1235-1244. ISSN 0256-2499 Mohd Badroldin, Mohd Khairul Anas and Abdul Hamid, Abdul Rahim and Abdul Raman, Syazwani and Zakaria, Rozana and Saeed, Reza Mohandes (2016) Late payment practices in the malaysian construction industry. Malaysian Journal Of Civil Engineering (MJCE), 28 (3). pp. 149-162. ISSN 1823-7843 Mohd Hashim, Mohd. H. and Mohd Sam, Abdul R. and Hussin, Mohd W. (2016) Experimental investigation on the effect of natural tropical weather on interfacial bonding performance of CFRP-concrete bonding system. Journal of Engineering Science and Technology, 11 (4). pp. 584-604. ISSN 1823-4690 Mohd Noor, R. and Ahmad, S. W. and Adnan, A. and Nazir, R. (2016) Attenuation function relationship of subduction mechanism and far field earthquake. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2597-2601. Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608 Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608 Mohd. Amin, Mohd. For and Mat Yusof, Nur‘Ain and Abdullah, Rini Asnida (2016) Empirical strength envelope for shale. Jurnal Teknologi, 78 (42554). pp. 129-137. ISSN 0127-9696 Mohd. Aris, Maizatul Asnie and Chelliapan, Shreeshivadasan and Mohd., Mohd. Fadhil and Anwar, Aznah Nor and Shahperi, Rafidah and Selvam, Sivathass Bannir (2016) Effect of effluent circulation and hydraulic retention time (HRT) on the performance of a modified anaerobic baffled reactor (MABR) during start-up period. Desalination and Water Treatment, 57 (40). pp. 18597-18605. ISSN 1944-3994 Mohd. Jakarni, F. and Rosli, M. F. and Md. Yusoff, N. I. and Aziz, M. M. A. and Muniandy, R. and Hassim, S. (2016) An overview of moisture damage performance tests on asphalt mixtures. Jurnal Teknologi, 78 (7-2). pp. 91-98. ISSN 0127-9696 Mohd. Sani, Mohd. Syahrul Hisyam and Muftah, Fadhluhartini and Muda, Mohd. Fakri and Tan, Cher Siang (2016) Resistance of built-up cold-formed steel channel columns filled with concrete. Jurnal Teknologi, 78 (5-2). pp. 99-104. ISSN 0127-9696 Mohd. Sani, Mohd. Syahrul Hisyam and Muftah, Fadhluhartini and Tan, Cher Siang and Md. Tahir, Mahmood (2016) Strengthening method and structural performance of cold-formed cut-curved steel under compression. Jurnal Teknologi, 78 (5-3). pp. 91-96. ISSN 0127-9696 Mohd. Shukry, N. A. and Abdul Hassan, N. and Hainin, M. R. and Abdullah, M. E. and Mohamed Abdullah, N. A. and Mahmud, M. Z. H. and Putrajaya, R. and Mashros, N. (2016) Experimental evaluation of antistripping additives on porous asphalt mixtures. Jurnal Teknologi, 78 (7-2). pp. 113-119. ISSN 0127-9696 Mohd. Yunus, M. Z. (2016) Sharing of gis spatial data intransportation engineering. Jurnal Teknologi, 78 (7-2). pp. 49-58. ISSN 0127-9696 Mohd. Yunus, M. Z. and Ahmad, Fatimah Shafinaz (2016) GIS technology as a tools to predict landslide. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2581-2586. ISSN 1819-6608 Mohd. Yunus, Mohd. Zulkifli and Omar, C. M. and Ismail, Zulhilmi (2016) GIS-Based assessment of mangrove response to shoreline change along the Coast of Kukup Island, Johor. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3747-3754. ISSN 1819-6608 Moideen, S. N. F. and Md. Din, M. F. and Ponraj, M. and Mohd. Yusof, M. B. and Ismail, Z. and Songip, A. R. and Chelliapan, S. (2016) Wasted cockle shell (Anadara granosa) as a natural adsorbent for treating polluted river water in the fabricated column model (FCM). Desalination and Water Treatment, 57 (35). pp. 16395-16403. ISSN 1944-3994 Mokhtar, Nor Izzah and Abu Hassan, Shukur and Ahmad, Yusof and Jamalud Din, Nor Ashiqeen and Omar, Balqis (2016) Finite element modeling of arcan testing method for ductile and brittle material under different loading configuration. Journal of Built Environment, Technology and Engineering, 1 (SEPT). pp. 289-298. ISSN 0128-1003 Monjezi, M. and Baghestani, M. and Shirani Faradonbeh, R. and Pourghasemi Saghand, M. and Jahed Armaghani, D. (2016) Modification and prediction of blast-induced ground vibrations based on both empirical and computational techniques. Engineering with Computers, 32 (4). pp. 717-728. ISSN 0177-0667 Moravej, Hossein and Vafaei, Mohammadreza and Abu Bakar, Suhaimi (2016) Seismic performance of a wall-frame air traffic control tower. Earthquake and Structures, 10 (2). pp. 463-482. ISSN 2092-7614 Muda, Khalida and Liew, Wai Loan and Kassim, Mohd. Azraai and Loh, Soh Kheang (2016) Performance evaluation of POME treatment plants. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2153-2159. ISSN 1819-6608 Muftah, Fadhluhartini and Mohd. Sani, Mohd. Syahrul Hisyam and Mohammad, Shahrin and Ngian, Shek Poi and Md. Tahir, Mahmood (2016) Temperature rise of cold-formed steel built-up back-to-back column under standard fire. Jurnal Teknologi, 78 (5-4). pp. 1-6. ISSN 0127-9696 Muhamad, M. S. and Salim, M. R. and Lau, W. J. and Hadibarata, T. and Yusop, Z. (2016) Removal of bisphenol A by adsorption mechanism using PES-SiO2 composite membranes. Environmental Technology (United Kingdom), 37 (15). pp. 1959-1969. ISSN 0959-3330 Muhamad, M. S. and Salim, M. R. and Lau, W. J. and Yusop, Z. and Hadibarata, T. (2016) The removal of bisphenol a in water treatment plant using ultrafiltration membrane system. Water, Air, and Soil Pollution, 227 (7). ISSN 0049-6979 Muhamad Askari, Lloyd Ling and Yusop, Zulkifli (2016) Performance of two new empirical equations compared to polynomial, exponential, power and logarithmic function for modelling low flow and high flow discharges. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2372-2379. ISSN 1819-6608 Mukhlas, Nurul ‘Azizah and Mashros, Nordiana and Che Puan, Othman and Hassan, Sitti Asmah and Abdul Hassan, Norhidayah and Abdullah, Rini Asnida and Rahman, Raha (2016) Effect of rainfall on traffic flow characteristics during night time. Jurnal Teknologi, 78 (42553). pp. 1-7. ISSN 0127-9696 Muniandy, J. M. and Yusop, Z. and Askari, M. (2016) Evaluation of reference evapotranspiration models and determination of crop coefficient for Momordica charantia and Capsicum annuum. Agricultural Water Management, 169 . pp. 77-89. ISSN 0378-3774 Muniyandi, S. K. and Sohaili, J. and Hassan, A. (2016) Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste. Journal of Applied Polymer Science, 133 (11). ISSN 0021-8995 Muniyandi, Shantha Kumari and Sohaili, Johan and Hassan, Azman (2016) Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste. Journal of Applied Polymer Science, 133 (11). pp. 1-12. Murlidhar, B. R. and Mohamad, E. T. and Alel, M. N. A. B. and Armaghani, D. J. (2016) Geological study and mining plan importance for mitigating alkali silica reaction in aggregate quarry operation. Jurnal Teknologi, 78 (7-3). pp. 71-79. ISSN 0127-9696 Murlidhar, B. R. and Mohamad, E. T. and Armaghani, D. J. (2016) Potential alkali silica reactivity of various rock types in an aggregate granite quarry. Measurement: Journal of the International Measurement Confederation, 81 . pp. 221-231. ISSN 0263-2241 Muttashar, H. L. and Hussin, M. W. and Mirza, J. and Hasanah, N. and Huseien, G. F. (2016) Engineering properties of high volume biomass waste mortar. Jurnal Teknologi, 78 (8). pp. 101-108. ISSN 0127-9696 Nasrollahpour, R. and Jamal, M. H. and Ismail, Z. and Rusli, N. M. (2016) Experiments on the dynamics of density currents. Jurnal Teknologi, 78 (9-4). pp. 71-76. ISSN 0127-9696 Naubi, Irena and Zardari, Noorul Hassan and Shirazi, Sharif Moniruzzaman and Ibrahim, Nurul Farahen and Baloo, Lavania (2016) Effectiveness of water quality index for monitoring Malaysian river water quality. Polish Journal of Environmental Studies, 25 (1). pp. 231-239. ISSN 1230-1485 Nawaz, N. and Harun, S. and Othman, R. and Heryansyah, A. (2016) Application of radial basis function neural networks for modeling rainfall-runoff processes: a case study of Semenyih River catchment, Malaysia. Chiang Mai Journal of Science, 43 (6Speci). pp. 1358-1367. Nawaz, N. and Harun, S. and Othman, R. and Heryansyah, A. (2016) Neuro-fuzzy systems approach to infill missing rainfall data for Klang River Catchment, Malaysia. Jurnal Teknologi, 78 (42533). pp. 15-21. ISSN 0127-9696 Nawaz, Nadeem and Harun, Sobri and Othman, Rawshan and Heryansyah, Arien (2016) Rainfall runoff modeling by multilayer perceptron neural network for LUI river catchment. Jurnal Teknologi, 78 (42533). pp. 37-42. ISSN 0127-9696 Nazir, R. and Ghareh, S. and Mosallanezhad, M. and Moayedi, H. (2016) The influence of rainfall intensity on soil loss mass from cellular confined slopes. Measurement: Journal of the International Measurement Confederation, 81 . pp. 13-25. ISSN 0263-2241 Nazir, Ramli and Moayedi, Hossein and Mohd. Noor, Rozaimi and Ghareh, Soheil (2016) Development of new attenuation equation for subduction mechanisms in Malaysia water. Arabian Journal of Geosciences, 9 (20). pp. 1-6. ISSN 1866-7511 Nejat, P. and Calautit, J. K. and Abd. Majid, M. Z. and Hughes, B. R. and Zeynali, I. and Jomehzadeh, F. (2016) Wind tunnel and numerical data on the ventilation performance of windcatcher with wing wall. Data in Brief, 9 . pp. 448-452. ISSN 2352-3409 Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Anti-short-circuit device: a new solution for short-circuiting in windcatcher and improvement of natural ventilation performance. Building and Environment, 105 . pp. 24-39. ISSN 0360-1323 Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Data on the natural ventilation performance of windcatcher with anti-short-circuit device (ASCD). Data in Brief, 9 . pp. 252-256. ISSN 2352-3409 Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Zeynali, I. and Jomehzadeh, F. (2016) Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher. Energy and Buildings, 126 . pp. 287-300. ISSN 0378-7788 Nezhad Khalil Abad, Seyed Vahid Alavi and Tugrul, Atiye and Gokceoglu, Candan and Jahed Armaghani, Danial (2016) Characteristics of weathering zones of granitic rocks in Malaysia for geotechnical engineering design. Engineering Geology, 200 . pp. 94-103. ISSN 0013-7952 Ngien, S. K. and Chin, P. Q. and Hasan, M. and Ali, M. I. and Mohd Tadza, M. Y. and Abd. Rahman, N. (2016) Image analysis of non-aqueous phase liquid migration in aggregated kaolin. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6393-6398. ISSN 1819-6608 Nor, N. S. M. and Puan, O. C. and Mashros, N. and Ibrahim, M. K. B. (2016) Estimating average daily traffic using alternative method for single carriageway road in Southern Region Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14092-14096. ISSN 1819-6608 Nurulain, C. M. and Ramadhansyah, P. J. and Norhidayah, A. H. (2016) Rheological properties of nanoclay as new nanotechnology of apshalt concrete: review. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11852-11854. ISSN 1819-6608 Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Ishak, Mohd. Yunus and Abdul Hamid, Hazlan and Abdul Aziz, Azmahani and Razavi, Masoud (2016) Compressive creep of kenaf bio-fibrous concrete composite under one dimensional stressing. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 279-289. ISSN 1823-7843 Oluwasola, E. A. and Hainin, M. R. (2016) Evaluation of performance characteristics of stone mastic asphalt incorporating industrial waste. Journal of Materials in Civil Engineering, 28 (12). ISSN 0899-1561 Oluwasola, E. A. and Hainin, M. R. and Aziz, M. M. A. (2016) Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings. Journal of Cleaner Production, 122 . pp. 315-325. ISSN 0959-6526 Oluwasola, Ebenezer Akin and Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Mohd. Warid, Muhammad Naqiuddin (2016) Volumetric properties and leaching effect of asphalt mixes with electric arc furnace steel slag and copper mine tailings. Sains Malaysiana, 45 (2). pp. 279-287. ISSN 0126-6039 Preece, Christopher Nigel and Mat Isa, Che Maznah and Mohd. Saman, Hamidah and Che Ibrahim, Che Khairil (2016) Development of entry location, entry timing and entry mode decision model for construction firms in international markets. Construction Management and Economics, 34 (4-5). pp. 236-257. ISSN 0144-6193 Rafieizonooz, M. and Mirza, J. and Salim, M. R. and Hussin, M. W. and Khankhaje, E. (2016) Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. Construction and Building Materials, 116 . pp. 15-24. ISSN 0950-0618 Rahman, N. A. and Taher, S. and Alahamdi, F. and Nasir, K. A. M. (2016) Arid hydrological modeling at Wadi Alaqiq, Madinah, Saudi Arabia. Jurnal Teknologi, 78 (7). pp. 51-58. ISSN 0127-9696 Rahmat, Normaizatul Akmar and Ali, Aili Aqilah and Salmiati, Salmiati and Hussain, Nafsiah and Muhamad, Mimi Suliza and Kristanti, Risky Ayu and Hadibarata, Tony (2016) Removal of Remazol brilliant blue r from aqueous solution by adsorption using pineapple leaf powder and lime peel powder. Water, Air, and Soil Pollution, 227 (4). ISSN 0049-6979 Ramadhansyah, P. J. and Nurfatin Aqeela, M. and Siti Nur Amiera, J. and Norhafizah, M. and Norhidayah, A. H. and Dewi, S. J. (2016) Use of coconut shell from agriculture waste as fine aggregate in asphaltic concrete. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7457-7462. ISSN 1819-6608 Ramli, M. Z. and Adnan, A. (2016) Malaysian bridges and the influence of Sumatran earthquake in bridge design. Malaysian Construction Research Journal, 18 (1). pp. 123-134. ISSN 1985-3807 Rasin, N. and Kueh, A. B. H. and Mahat, M. N. H. and Yassin, A. Y. M. (2016) Stability of triaxially woven fabric composites employing geometrically nonlinear plate model with volume segmentation ABD constitution. Journal of Composite Materials, 50 (19). pp. 2719-2735. ISSN 0021-9983 Reddy, A. V. B. and Yusop, Z. and Jaafar, J. and Reddy, Y. V. M. and Aris, A. B. and Majid, Z. A. and Talib, J. and Madhavi, G. (2016) Recent progress on Fe-based nanoparticles: synthesis, properties, characterization and environmental applications. Journal of Environmental Chemical Engineering, 4 (3). pp. 3537-3553. ISSN 2213-3437 Rezania, S. and Din, M. F. M. and Taib, S. M. and Dahalan, F. A. and Songip, A. R. and Singh, L. and Kamyab, H. (2016) The efficient role of aquatic plant (water hyacinth) in treating domestic wastewater in continuous system. International Journal of Phytoremediation, 18 (7). pp. 679-685. ISSN 1522-6514 Rezania, S. and Md. Din, M. F. and Kamaruddin, S. F. and Taib, S. M. and Singh, L. and Yong, E. L. and Dahalan, F. A. (2016) Evaluation of water hyacinth (Eichhornia crassipes) as a potential raw material source for briquette production. Energy, 111 . pp. 768-773. ISSN 0360-5442 Rezania, Shahabaldin and Ponraj, Mohanadoss and Md. Din, Mohd. Fadhil and Chelliapan, Shreeshivadasan and Md. Sairan, Fadzlin (2016) Effectiveness of Eichhornia crassipes in nutrient removal from domestic wastewater based on its optimal growth rate. Desalination and Water Treatment, 57 (1). pp. 360-365. ISSN 1944-3994 Roslan, Nurul Hidayah and Ismail, Mohammad and Abdul Majid, Zaiton and Ghoreishiamiri, Seyedmojtaba and Muhammad, Bala (2016) Performance of steel slag and steel sludge in concrete. Construction and Building Materials, 104 . pp. 16-24. ISSN 0950-0618 Saadatkhah, N. and Tehrani, M. H. and Mansor, S. and Khuzaimah, Z. and Kassim, A. and Saadatkhah, R. (2016) Impact assessment of land cover changes on the runoff changes on the extreme flood events in the Kelantan River basin. Arabian Journal of Geosciences, 9 (17). ISSN 1866-7511 Sadeghifam, A. N. and Marsono, A. K. and Kiani, I. and Isikdag, U. and Bavafa, A. A. and Tabatabaee, S. (2016) Energy analysis of wall materials using building information modeling (BIM) of public buildings in the tropical climate countries. Jurnal Teknologi, 78 (10). pp. 35-41. ISSN 0127-9696 Sani, M. S. H. M. and Kamal, M. M. and Muftah, F. and Tan, C. S. (2016) Flexural performance of built-up cold-formed steel beam filled with compacted soil. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9855-9862. ISSN 1819-6608 Sanik, Mohd. Erwan and Prasetijo, Joewono and Mat Nor, Ahmad Hakimi and Hamid, Nor Baizura and Yusof, Ismail and Putra Jaya, Ramadhansyah (2016) Analysis of car following headway along multilane highway. Jurnal Teknologi, 78 (4). pp. 59-64. ISSN 0127-9696 Sarbini, N. N. and Ibrahim, I. S and Saim, A. Aziz and Ab. Kadir, Mariyana Aida and Syed Mohsin, S. M. (2016) Development of shear stress equation contributed by steel fibre in reinforced concrete. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5445-5451. ISSN 1819-6608 Sari, A. A. and Yasin, H. and Tachibana, S. and Hadibarata, T. (2016) Effects of mediators for ligninolytic enzyme production and kinetic studies on degradation of pentachlorobenzene by trametes versicolor U80. Water, Air, and Soil Pollution, 227 (9). ISSN 0049-6979 Sathishkumar, Palanivel and Vennila, Krishnan and Jayakumar, Rajarajeswaran and Mohd. Yusoff, Abdull Rahim and Hadibarata, Tony and Palvannan, Thayumanavan (2016) Phyto-synthesis of silver nanoparticles using Alternanthera tenella leaf extract: an effective inhibitor for the migration of human breast adenocarcinoma (MCF-7) cells. Bioprocess and Biosystems Engineering, 39 (4). pp. 651-659. ISSN 1615-7591 Sattar, Golam Shabbir and Keramat, Mumnunul and Shahid, Shamsuddin (2016) Deciphering transmissivity and hydraulic conductivity of the aquifer by vertical electrical sounding (VES) experiments in Northwest Bangladesh. Applied Water Science, 6 (1). pp. 35-45. ISSN 2190-5487 Shad, H. and Adnan, A. and Behbahani, H. P. and Vafaei, M. (2016) Efficiency of TLDs with bottom-mounted baffles in suppression of structural responses when subjected to harmonic excitations. Structural Engineering and Mechanics, 60 (1). pp. 131-148. ISSN 1225-4568 Shafaghat, Arezou and Keyvanfar, Ali and Manteghi, Golnoosh and Lamit, Hasanuddin (2016) Environmental-conscious factors affecting street microclimate and individuals' respiratory health in tropical coastal cities. Sustainable Cities and Society, 21 . pp. 35-50. ISSN 2210-6707 Shafaghat, Arezou and Keyvanfar, Ali and Muslim, Nurul Hidayah (2016) Drivers' adaptive travel behaviors towards green transportation development: a critical review. Archives of Transport, 38 (2). pp. 49-70. ISSN 0866-9546 Shafaghatarezou, Arezou and Manteghimgolnoosh, Golnoosh and Keyvanfaralikeyvanfar, Ali and Lamit, Hasanuddin and Saitoke, Kei and Ossen, Dilshan Remaz (2016) Street geometry factors influence urban microclimate in tropical coastal cities: a review. Environmental And Climate Technologies, 17 (1). pp. 61-75. ISSN 1691-5208 Shahid, S. and Wang, X. J. and Harun, S. B. and Shamsudin, S. B. and Ismail, T. and Minhans, A. (2016) Climate variability and changes in the major cities of Bangladesh: observations, possible impacts and adaptation. Regional Environmental Change, 16 (2). pp. 459-471. ISSN 1436-3798 Shahid, Shamsuddin and Minhans, Anil (2016) Climate change and road safety: a review to assess impacts in Malaysia. Jurnal Teknologi, 78 (4). pp. 1-8. ISSN 0127-9696 Shahperi, R. and Din, M. F. M. and Chelliapan, S. and Aris, M. A. M. and Selvam, S. B. and Abdullah, N. and Yuzir, M. A. M. (2016) Optimization of methane production process from synthetic glucose feed in a multi-stage anaerobic bioreactor. Desalination and Water Treatment, 57 (60). pp. 29168-29177. ISSN 1944-3994 Shahperi, R. and Din, M. F. M. and Chelliapan, S. and Aris, M. A. M. and Selvam, S. B. and Abdullah, N. and Yuzir, M. A. M. (2016) Optimization of methane production process from synthetic glucose feed in a multi-stage anaerobic bioreactor. Desalination and Water Treatment, 57 (60). pp. 29168-29177. ISSN 1944-3994 Shariati, M. and Ramli Sulong, N. H. and Shariati, A. and Kueh, A. B. H. (2016) Comparative performance of channel and angle shear connectors in high strength concrete composites: an experimental study. Construction and Building Materials, 120 . pp. 382-392. ISSN 0950-0618 Shariff, Mey and Che Puan, Othman and Mashros, Nordiana (2016) Review of traffic data collection methods for drivers’ car – following behaviour under various weather conditions. Jurnal Teknologi, 78 (4). pp. 37-47. ISSN 0127-9696 Sharudin, E. S. and Mohd. Yunus, N. Z. and Marto, A. and Jusoh, S. N. and Ahmad, K. and Kasim, F. and Abdullah, R. A. and Hezmi, M. A. (2016) Rock bearing resistance of bored piles socketed into rock. Jurnal Teknologi, 78 (8-6). pp. 45-51. ISSN 0127-9696 Sheikh Dawood, Shamsudin Mustafa and Salmiati, Salmiati and Arman, Nor Zaiha (2016) The impact of flood on water quality and benthic invertebrate in rivers at Gua Musang, Kelantan. Environmental Engineering, Hydraulics and Hydrology, 3 (1). pp. 67-82. ISSN 9789670194752 Shirani Faradonbeh, R. and Jahed Armaghani, D. and Abd. Majid, M. Z. and Md. Tahir, M. and Ramesh Murlidhar, B. and Monjezi, M. and Wong, H. M. (2016) Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction. International Journal of Environmental Science and Technology, 13 (6). pp. 1453-1464. ISSN 1735-1472 Shirazi, S. M. and Adham, I. and Othman, F. and Zardari, N. H. and Ismail, Z. (2016) Runoff trend and potentiality in Melaka Tengah catchment of Malaysia using SCS-CN and statistical technique. Journal of Environmental Engineering and Landscape Management, 24 (4). pp. 245-257. ISSN 1648-6897 Shoushtari, A. V. and Adnan, A. B. and Zare, M. (2016) On the selection of ground-motion attenuation relations for seismic hazard assessment of the Peninsular Malaysia region due to distant Sumatran subduction intraslab earthquakes. Soil Dynamics and Earthquake Engineering, 82 . pp. 123-137. ISSN 0267-7261 Shu Chi, L. and Marsono, A. K. and Md. Tap, M. (2016) Clamping and interlocking effects on IBS block house system in comparison with conventional house system. Jurnal Teknologi, 78 (11). pp. 93-102. ISSN 0127-9696 Sohaili, J. and Shi, H. S. and Baloo, Lavania and Zardari, N. H. and Ahmad, N. and Muniyandi, S. K. (2016) Removal of scale deposition on pipe walls by using magnetic field treatment and the effects of magnetic strength. Journal of Cleaner Production, 139 . pp. 1393-1399. ISSN 0959-6526 Suliman, A. H. A. and Katimon, A. and Darus, I. Z. M. and Shahid, S. (2016) Topmodel for streamflow simulation of a tropical catchment using different resolutions of ASTER DEM: optimization through response surface methodology. Water Resources Management, 30 (9). pp. 3159-3173. ISSN 0920-4741 Tahmasbi, Farzad and Malek, Shervin and Shariati, Mahdi and Ramli Sulong, Nor Hafizah and Md. Tahir, Mahmood (2016) Shear capacity of C-shaped and L-shaped angle shear connectors. Plos One, 11 (8). pp. 1-19. ISSN 1932-6203 Tajudin, S. A. A. and Nordin, N. S. and Marto, A. and Madun, A. and Abidin, M. H. Z. and Jefferson, I. and Azmi, M. A. M. M. (2016) The monitoring and cementation behavior of electrokinetic stabilisation technique on Batu Pahat marine clay. International Journal of GEOMATE, 11 (4). pp. 2581-2588. ISSN 2186-2982 Talib, Z. A. and Kassim, A. and Yunusa, G. H. and Rashid, A. S. A. (2016) Response of suction distribution due to variations of permeability in residual soil slope. Jurnal Teknologi, 78 (8-5). pp. 109-115. ISSN 0127-9696 Tan, Y. C. and Chow, C. M. and Koo, K. S. and Nazir, R. (2016) Challenges in design and construction of deep excavation for KVMRT in Kuala Lumpur limestone formation. Jurnal Teknologi, 78 (8-5). pp. 97-107. ISSN 0127-9696 Tarmizi, Tarmizi and Saad, R. and Mohd. Muztaza, N. and Ismail, N. A. and Saidin, M. M. and Mohamad, E. T. (2016) Integration of SPT (N-value), mackintosh probe (M-value) and resistivity values for soft soil assessment. Jurnal Teknologi, 78 (8-6). pp. 87-92. ISSN 0127-9696 Thakur, Sveta and Singh, Lakhveer and Ab. Wahid, Zularisam and Siddiqui, Muhammad Faisal and Atnaw, Samson Mekbib and Md. Din, Mohd. Fadhil (2016) Plant-driven removal of heavy metals from soil: uptake, translocation, tolerance mechanism, challenges, and future perspectives. Environmental Monitoring and Assessment, 188 (4). ISSN 0167-6369 Ting, Tay Lay and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Jayanti, Dewi Sri and Mohd. Ariffin, Mohd. Azreen (2016) A review of chemical and physical properties of coconut shell in asphalt mixture. Jurnal Teknologi, 78 (4). pp. 85-89. ISSN 0127-9696 Tsutsumi, Takashi and Kukino, Seita and Abdullah, Rini Asnida and Mohd. Amin, Mohd. For (2016) Distribution of maximum principal stress under distributed load from loading plate in specimen for Brazilian test. Jurnal Teknologi, 78 (8-6). pp. 81-86. ISSN 0127-9696 Uma, M. and Kassim, K. A. and Chiet, K. T. P. (2016) Temperature effects on the strengh properties of microbially stabilized residual soil. Jurnal Teknologi, 78 (7-3). pp. 101-104. ISSN 0127-9696 Umara Shettima, A. and Hussin, M. W. and Ahmad, Y. and Yau, M. (2016) Effect of sulphuric acid on concrete with iron ore tailings. Jurnal Teknologi, 78 (6-12). pp. 31-36. ISSN 0127-9696 Vafaei, M. and Alih, S. C. (2016) Assessment of seismic design response factors of air traffic control towers. Bulletin of Earthquake Engineering, 14 (12). pp. 3441-3461. Vafaei, M. and Alih, S. C. (2016) Assessment of seismic design response factors of air traffic control towers. Bulletin of Earthquake Engineering, 14 (12). pp. 3441-3461. ISSN 1570-761X Vafaei, M. and Alih, S. C. and Abdul Rahman, Q. (2016) Drift demands of low-ductile moment resistance frames (MRF) under far field earthquake excitations. Jurnal Teknologi, 78 (6). pp. 82-92. ISSN 0127-9696 Vafaei, Mohammadreza and Alih, Sophia C. and Abdul Rahman, Qotrunnada (2016) Drift demands of low-ductile moment resistance frames (MRF) under far field earthquake excitations. Jurnal Teknologi, 78 (6). pp. 82-92. ISSN 0127-9696 Wang, Xiao Jun and Zhang, Jian Yun and Ali, Mahtab and Shahid, Shamsuddin and He, Rui Min and Xia, Xing Hui and Jiang, Zhuo (2016) Impact of climate change on regional irrigation water demand in Baojixia irrigation district of China. Mitigation and Adaptation Strategies for Global Change, 21 (2). pp. 233-247. ISSN 1381-2386 Wang, Xiao-jun and Zhang, Jian-yun and Shahid, Shamsuddin and Guan, En-hong and Wu, Yong-xiang and Gao, Juan and He, Rui-min (2016) Adaptation to climate change impacts on water demand. Mitigation and Adaptation Strategies for Global Change, 21 (1). pp. 81-99. Wirasnita, Riry and Hadibarata, Tony (2016) Potential of the white-rot fungus pleurotus pulmonarius F043 for degradation and transformation of fluoranthene. Pedosphere, 26 (1). pp. 49-54. ISSN 1002-0160 Wong, C. L. and Liew, J. and Yusop, Z. and Ismail, T. and Venneker, R. and Uhlenbrook, S. (2016) Rainfall characteristics and regionalization in Peninsular Malaysia based on a high resolution gridded data set. Water (Switzerland), 8 (11). ISSN 2073-4441 Wrzesien, Andrzej M. and Phan, Duoc T. and Lim, James B. P. and Lau, Hieng Ho and Hajirasouliha, Iman and Tan, Cher Siang (2016) Effect of stressed-skin action on optimal design of cold-formed steel square and rectangular-shaped portal frame buildings. International Journal of Steel Structures, 16 (2). pp. 299-307. ISSN 1598-2351 Wu, H. and Wang, X. and Shahid, S. and Ye, M. (2016) Changing characteristics of the water consumption structure in Nanjing city, Southern China. Water (Switzerland), 8 (8). ISSN 2073-4441 Yaakob, Omar and Hashim, Farah Ellyza and Mohd. Omar, Kamaludin and Md. Din, Ami Hassan and Koh, Kho King (2016) Satellite-based wave data and wave energy resource assessment for South China Sea. Renewable Energy, 88 . pp. 359-371. ISSN 0960-1481 Yahaya, F. M. and Muthusamy, K. and Hussin, M. W. (2016) Long term investigation on sulphate resistance of aerated concrete containing palm oil fuel ash. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2406-2411. ISSN 1819-6608 Yahya, S. M. and Abdullah, R. A. and Mohamad Ismail, M. A. and Mohamad, H. and Hezmi, M. A. and Jusoh, S. N. (2016) 3D numerical modelling of shallow tunnel in weathered granite incorporating multi-stage excavation and pre-support. Jurnal Teknologi, 78 (8-6). pp. 39-44. ISSN 0127-9696 Yip, Chun Chieh and Marsono, Abdul Kadir (2016) Structural seismic performance of reinforced concrete block system for two storeys safe house. Jurnal Teknologi, 78 (2). pp. 83-97. ISSN 0127-9696 Yong, Ee Ling and Lin, Yi-Pin (2016) Effects of pH value and temperature on the initiation, promotion, inhibition and direct reaction rate constants of natural organic matter in ozonation. RSC Advances, 6 (22). pp. 18587-18595. ISSN 2046-2069 Yunus, N. Z. M. and Wanatowski, D. and Hassan, N. A. and Marto, A. (2016) Shear strength and compressibility behaviour of lime-treated organic clay. KSCE Journal of Civil Engineering, 20 (5). pp. 1721-1727. ISSN 1226-7988 Zahmatkesh, Farshad and Osman, Hanim and Talebi, Elnaz and Kueh, Ahmad Beng Hong and Md. Tahir, Mahmood (2016) Numerical study on the structural performance of steel beams with slant end-plate connections. Latin American Journal of Solids and Structures, 13 (7). pp. 1360-1387. ISSN 1679-7817 Zaidi, Nur Syamimi and Muda, Khalida and Sohaili, Johan and Toemen, Susilawati and Yusof, Nur Zulaikha (2016) Optimization of operating parameters for aggregation under magnetic field by response surface methodology. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2419-2425. ISSN 1819-6608 Zardari, N. H. and Shirazi, S. M. and Farahen, N. and Irena, N. (2016) Operational efficiency and up-coning problem of scavenger wells in lower Indus Basin of Pakistan. Desalination and Water Treatment, 57 (60). pp. 29178-29191. ISSN 1944-3994 Zen, I. S. and Subramaniam, D. and Sulaiman, H. and Saleh, A. L. and Omar, W. and Salim, M. R. (2016) Institutionalize waste minimization governance towards campus sustainability: a case study of Green Office initiatives in Universiti Teknologi Malaysia. Journal of Cleaner Production, 135 . pp. 1407-1422. ISSN 0959-6526 Zohreh, M. and Junin, R. and Bakhtiary, H.A. and Poor, S.T. and Mohamadian, R. and Movahed, A.A. (2016) The evaluation of borehole imaging result comparing with cores in Sarvak fractured and non-fractured reservoir. Arabian Journal of Geosciences, 9 (3). ISSN 1866-7511 Zolfagharifar, S. Y. and Deljoo, C. (2016) Earthquake risk analysis and review of the geology of the Dam Site area of Dasht Palang. IIOAB Journal, 7 . pp. 206-213. ISSN 0976-3104 Zolfegharifar, S. Y. and Bosak, M. (2016) Study of behbahan city velocity waves shear. IIOAB Journal, 7 . pp. 344-349. ISSN 0976-3104 Book SectionGhaffarianhoseini, A. and Ghaffarianhoseini, A. and Tookey, J. and Omrany, H. and Fleury, A. and Naismith, N. and Ghaffarianhoseini, M. (2016) The essence of smart homes: application of intelligent technologies towards smarter urban future. In: Artificial Intelligence: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 79-121. ISBN 978-152251760-3 Conference or Workshop ItemAlahmadi, F. and Rahman, N. A. and Yusop, Z. and Abdul Razzak, M. J. (2016) Evaluation of diversion channel capacity using flood hydrodynamic modeling. In: International Conference on Fluvial Hydraulics, RIVER FLOW 2016, 11-14 July 2016, St. Louis, United States. Aminudin, E. and Md. Din, M. F. and Hussin, M. W. and Abdullah, A. H. and Iwao, K. and Ichikawa, Y. (2016) Properties of agro-industrial aerated concrete as potential thermal insulation for building. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia. Ayodele, S. O. and Oga, O. E. and Bundot, Y. G. and Ogbari, M. E. (2016) Role of power supply towards e-learning acceptance: VBSEM-AMOS. In: 6th International Conference on Information Communication and Management, ICICM 2016, 29 October 2016 through 31 October 2016, United Kingdom. Azhar, A. T. S. and Fazlina, M. I. S. and Aziman, M. and Fairus, Y. M. and Azman, K. and Hazreek, Z. A. M. (2016) Preliminary analysis on matric suction for barren soil. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia. Chiet, K. T. P. and Kassim, K. A. and Chen, K. B. and Martula, U. and Yah, C. S. and Arefnia, A. (2016) Effect of reagents concentration on biocementation of tropical residual soil. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Malaysia. Faris, M. A. and Abdullah, M. M. A. B. and Ismail, K. N. and Muniandy, R. and Jaya, R. P. (2016) Performance of straight steel fibres reinforced alkali activated concrete. In: 2016 International Conference on Innovative Research, ICIR 2016, 19 May 2016 through 20 May 2016, Romania. Faris, M. A. and Abdullah, M. M. A. B. and Ismail, K. N. and Muniandy, R. and Mahmad Nor, A. and Putra Jaya, R. and Waried Wazien, A. Z. (2016) Properties of hooked steel fibers reinforced alkali activated material concrete. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand. Ishak, M. F. and Sulaiman, F. F. and Ali, N. and Kassim, A. (2016) Tree water uptake and suction distribution on tropical residual soil slope. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015, 26-27 Sept 2015, Jakarta, Indonesia. Ismail, R. and Ibrahim, A. and Hamid, H. A. and Mahmood, M. R. and Adnan, A. (2016) Dynamic mechanical behavior magnetorheological nanocomposites containing CNTs: a review. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia. Jamaluddin, N. and Hamzah, A. F. and Wan Ibrahim, M. H. and Jaya, R. P. and Arshad, M. F. and Abidin, N. E. Z. and Dahalan, N. H. (2016) Fresh properties and flexural strength of self-compacting concrete integrating coal bottom ash. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia. Lee, L. M. and Yasuo, T. and Wei, L. C. and Yuan, L. C. (2016) Development of data acquisition system for consolidated undrained triaxial test. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Malaysia. Lee, X. S. and Khamidi, M. F. and See, Z. S. and Lees, T. J. and Chai, C. (2016) Augmented reality for ndimensional building information modelling: contextualization, customization and curation. In: 22nd International Conference on Virtual Systems and Multimedia, VSMM 2016, 17-21 Oct 2016, Kuala Lumpur, Malaysia. Marto, A. and Jahidin, M. R. and Aziz, N. A. and Kasim, F. and Mohd Yunus, N. Z. (2016) Stabilization of marine clay using biomass silica-rubber chips mixture. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia. Marto, A. and Sohaei, H. and Hajihassani, M. and Makhtar, A. M. (2016) Effects of tunnel face distance on surface settlement. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia. Marto, A. and Tan, C. S. and Makhtar, A. M. and Pakir, F. and Chong, S. Y. (2016) Effect of fines content on critical state parameters of sand matrix soils. In: 1st International Conference on Science and Technology 2015, ICST 2015, 11 November 2015 through 13 November 2015, Indonesia. Mohamad, M. E. and Mahmood, A. A. and Min, A. Y. Y. and Khalid, N. H. A. (2016) A review of the mechanical properties of concrete containing biofillers. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia. Muftah, F. and Mohd. Sani, M. S. H. and Osman, A. R. and Razlan, M. A. and Mohammad, S. (2016) Assessment of mechanical properties of cold formed steel material at elevated temperature. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia. Muftah, F. and Sani, M. S. H. M. and Mohammad, S. and Ngian, S. P. and Tahir, M. M. (2016) Temperature development of cold formed steel column channel section under standard fire. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Penang; Malaysia. Oluwasola, E. A. and Hainin, M. R. and Aziz, Md. M. A. (2016) Durability assessment of dense-graded asphalt incorporating electric arc furnace steel slag and copper mine tailings. In: 8th International Conference on Maintenance and Rehabilitation of Pavements, MAIREPAV 2016, 27-29 July 2016, Singapore. Pour, S. H. and Shahid, S. and Chung, E. S. (2016) A hybrid model for statistical downscaling of daily rainfall. In: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016, 21-26 Aug 2016, Songdo ConvensiaIncheon, South Korea. Razaq, S. A. and Shahid, S. and Ismail, T. and Chung, E. S. and Mohsenipour, M. and Wang, X. J. (2016) Prediction of flow duration curve in ungauged catchments using genetic expression programming. In: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016, 21-26 Aug 2016, South Korea. Sani, M. S. H. M. and Muftah, F. and Tan, C. S. (2016) Investigation on mechanical performance of slender cold-formed steel channel column. In: International Conference on Design, Materials and Manufacturing, ICDMM 2016, 25-27 March 2016, Kuala Lumpur, Malaysia. Sani, M. S. H. M. and Muftah, F. and Tan, C. S. and Tahir, M. M. (2016) Study on mechanical behaviour of cold-formed steel channel pre cut-curving beam. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Malaysia. Yusof, M. F. and Setapa, A. S. and Tajudin, S. A. A. and Madun, A. and Abidin, M. H. Z. and Marto, A. (2016) The soil-water characteristic curve of unsaturated tropical residual soil. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Langkawi; Malaysia. ThesisHadipour, Sahar (2016) Robust statistical downscaling of rainfall and temperature for reduction of uncertainty in climate change impacts on river discharge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Johari, Norshazwina (2016) Enhancing stability of slope using soil nailing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohd. Ali, Muhammad Khairool Fahmy (2016) Effectiveness of hybrid soliwave technique in mitigation of microbiologically influenced corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ab. Ghani, Zairawati (2016) Multimedia environmental fate and transport model of dichlorodiphenyltrichloethane at Sayong River watershed based on fugacity approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Abas, Darul Nafis (2016) The motivation factors in the provision of green criteria in green building development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Abbas, Hajer Satih (2016) Performance of structural composite slab with partial and full interaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Abd. Suki, Sumie Sarmiza (2016) Persepsi amalan pengurusan keselamatan dan kesihatan pekerjaan dalam kalangan pekerja sektor pembinaan. Masters thesis, Universiti Teknologi Malaysia. Abd. Suki, Sumie Sarmiza (2016) Persepsi amalan pengurusan keselamatan dan kesihatan pekerjaan dalam kalangan pekerja sektor pembinaan. Masters thesis, Universiti Teknologi Malaysia. Abd. Wahab, Yusrin Faiz (2016) Spatial multi-criteria for wetland site selection : a case study in Senibong, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Abdul Shukor Lim, Nor Hasanah (2016) The durability properties of high volume oil palm biomass waste mortar. PhD thesis, Universiti Teknologi Malaysia. Abdulrazaq, Salaudeen (2016) Streamflow prediction in ungauged river basin using gene expression programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Abideen, Muzaffar Zainal (2016) Optimisation of coagulation process in water treatment plant using statistical approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Abu Bakar, Nur Fatin Syazwani (2016) Sustainable construction for mixed development projects in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia. Ahmad, Faridahanim (2016) Seagrass interaction with heavy metals at Pulai River Estuary. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ahmad Shakri, Md. Rajuna (2016) Centralised ventilation system for preventing nosocomial transmission of tuberculosis in a hospital isolation ward. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ahmad Zaini, Ashraf (2016) Evaluation of crack relief layer for airport runways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Altieb Ahmed, Zohair Ahmed (2016) Modification of asphalt binder with various percentages of crumb rubber in flexible pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ariffin, Nur Farhayu (2016) Performance of epoxy-based self-healing mortar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Arjuna, Norazah (2016) Earthquake effects on tunnel floating slab track and lining with slab bearing and base isolator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Balarabe, Abubakar Sadeeq (2016) Level of service analysis of selected walkways corridors in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Elias, Mohd. Aidil (2016) Activated carbon from empty fruit bunch of oil palm and its potential in Bisphenol-A removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Farahmandpour, Omolbanin (2016) Behaviour of industrialised building system model in fluid-solid interaction. PhD thesis, Universiti Teknologi Malaysia. Firmawan, Ferry (2016) The development of green construction site index. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Forouzani, Parham (2016) Engineering properties of rubberised concrete incorporating palm oil fuel ash. PhD thesis, Universiti Teknologi Malaysia. Harith, Noor Sheena Herayani (2016) Probabilistic seismic hazard assessment of East Malaysia using proposed empirical GMPE for shallow crustal earthquake. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Harudin, Harfizah (2016) Instrumentation for monitoring the effectiveness of retaining wall design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Hirol, Halinawati (2016) Meshfree formulations of kinematic wave for channel flow routing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ibrahim, Nurul Ain (2016) Mud flood as a suitable material for subgrade layer of low traffic volume. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ishak, Daeng Siti Maimunah (2016) Mangrove migration due to sea level rise. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Jusoh, Siti Norafida (2016) Performance of precast bolted tunnel lining through physical and numerical modelling. PhD thesis, Universiti Teknologi Malaysia. Kamal, Nurshafeena (2016) Determining emergency evacuation aid for flood disaster preparedness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Kamyab, Hesam (2016) Lipid production from palm oil mill effluent by microalgae. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Khalfalla, Firas Ahmed Ibrahim (2016) Reliability of indirect tensile strength test on homogenous material using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Lai, Woon Fatt (2016) Conceptual model of engineering consultancy practice (ECP) performance measurement factors in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Lee, Fook Ming (2016) Public opinion of hospital campus to response to low carbon city framework criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Lee, Yee Ling (2016) Structural behaviour of slab panel system with embedded cold-formed steel skeletal frame. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Lee, Yee Yong (2016) Impact of thermal behaviour on outdoor human thermal comfort in tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ling, Felix Ngee Leh (2016) Physico-chemical and microstructure of artifical soils atabilised with lime-zeolite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mad. Rosni, Nurul Najihah (2016) Effect of fineness coconut shell charcoal ash on the rheological properties of bitumen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mansor, Nur Fatiha Nadia (2016) Modelling of reinforced concrete beam by using plasticity approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mat Hassan, Mohd. Arif Hakimi (2016) Bioethanol production from batch and continuous phytoremediation systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mat Yusof, Nur 'Ain (2016) Empirical strenqth envelope for shale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Memon, Ruhal Pervez (2016) Mechanical and thermal properties of sawdust concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohamad, Mazizah Ezdiani (2016) Interface shear strength of composite concrete-to-concrete bond. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohamad Najib, Fatin Hazwani (2016) Slope analysis and remedial work on landslide at Taman Setiawangsa, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Mohammad Yahya, Sarder (2016) Forepoling pre-support application in the shallow tunneling through weathered granite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohammadi, Farahbod (2016) A decision support system for demolition safety risk assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohammed Salah, Faisal Mohammed (2016) Performance of asphaltic concrete incorporating SBR subjected to aging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohd. Noor, Rozaimi (2016) Subduction earthquake effect on lateral ground movement for offshore structure in Malaysia water. PhD thesis, Universiti Teknologi Malaysia. Mohd. Nor, Nurafifah (2016) Bioremediation of anthracene and remazol brilliant blue R by fungi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mohd. Satar, Mohd. Khairul Idham (2016) Repeatability of reclaimed asphalt pavement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Moideen, Siti Nur Fatihah (2016) Binary mixture composite adsorbents from crushed cockleshells and natural zeolites for river water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Moradi, Razieh (2016) Physical and numerical modelling of bottom ash columns installed in soft soil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Muhamad, Mimi Suliza (2016) Polyethersulfone-silicon dioxide hollow fiber ultrafiltration membrane for removal of bisphenol A. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Mustafa, Khairul Hafiz (2016) Evaluation of crack relief layer for roads and highways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Naubi, Irena (2016) Priority ranking of Skudai River sub-watersheds for potential flood damages and water quality parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Nugdalla, Mohamed Abdulla (2016) Housing development for residence in Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Ong, Peng Pheng (2016) Seismic performance on tuned liquid damper in novel wall interlocking block. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Othman, Mohd. Hanifi (2016) Performance and modelling of transverse rumble strips on noise and vibration stimuli. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Pauzan, Mohammad Arif Budiman (2016) Zeolite application for the enhancement of methane production in landfill leachate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Rad, Saeed (2016) Split pond design and the use of Nano TiO2 for stormwater quality improvement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Rezania, Shahabaldin (2016) Application of water hyacinth in wastewater treatment and cellulosic ethanol production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Rizalman, Ahmad Nurfaidhi (2016) Numerical simulation of axially loaded concrete filled hollow steel section columns at elevated temperatures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Sa'ari, Radzuan (2016) Accuracy improvement in area-based matching for structural displacement measurements. PhD thesis, Universiti Teknologi Malaysia. Sarvari, Hadi (2016) A hybrid multi-criteria decision making method for risk assessment of public-private partnership projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Shaari, Nur Syazana (2016) Controls for musculoskeletal disorders (MSDs) in constructon trades. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Shaharuddin, Nawal (2016) Sludge management options for energy recovery using intergovernmental panel on climate change guidelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Shahrin, Muhammad Irfan (2016) Development of brick from mud flood: mechanical properties and morphology changes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Sharudin, Eda Suhaili (2016) Rock resistance of bored piles socketed into rock. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering. Shoraka, Mohammad (2016) Development of simulation model for assessing the performance of weaving sections on interchanges. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Shoushtari, Abdollah Vaez (2016) Seismic hazard assessment of Peninsular Malaysia based on new ground-motion prediction equations for subduction earthquakes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Shoushtari, Abdollah Vaez (2016) Seismic hazard assessment of Peninsular Malaysia based on new ground-motion prediction equations for subduction earthquakes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Supian, Nor Sumaiyyah (2016) Computer waste management and awareness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Taib, Adaweiah (2016) Critical success factors for safety program implementation among construction companies in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Tan, Joo Ee (2016) Field assessment of old jetty in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Tholpakar, Anwar Ibrahim (2016) Causes of government building defects and failures perceived by JKR stakeholders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Tiong, Kenny Ping Chiet (2016) Microbial induced calcite precipitation treatment on tropical residual soil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Tonduba, Yvonne William (2016) The application of waste glass as partial replacement for cement in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Usmani, Mohammed Umar (2016) Physical, mechanical and durable characteristics of concrete incorporating polyethylene terepthalate fiber from bottle waste. Masters thesis, Universiti Teknologi Malaysia. Wan Ahmad, Saffuan (2016) Seismic performance of fixed offshore structures under far field earthquake. PhD thesis, Universiti Teknologi Malaysia. Yahaya, Muhammad Nabil Fikri (2016) Characterization of polyvinylidene fluoride hollow fiber membrane with titanium dioxide for water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Yusof, Mufidatul Iman (2016) Nutrients and heavy metals in the straits of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Zaidi, Nur Syamimi (2016) Application of magnetic field for reduction of sludge bulking in activated sludge system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. Zardasti, Libriati (2016) Reputation loss framework for consequence assessment of onshore pipeline damage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering. |