Items where Year is 2014

A

Abbasi, Sayyed Alireza (2014) Analysis on parameters involved in 2-D fracture geometry design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Abd. Jalil, Aishah and Triwahyono, Sugeng and Hairom, Nur Hanis Hayati and Mohamed Razali, Nurul Aini (2014) Facile synthesis of a zinc oxide nanoparticle by electrochemical method. Malaysian Journal of Fundamental And Applied Sciences, 10 (3). pp. 165-168. ISSN 2289-5981

Abd. Majid, Fadzilah @ Adibah and A. H., Siti Noorwanie (2014) Wound healing potential of diabecine polyherbs aqueous extracts in human skin fibroblast scratch assay method. Regenerative Research, 3 (2). pp. 92-93. ISSN 2232-0822

Abd. Majid, Fadzilah @ Adibah and Hassan Fahmi, Ismail (2014) Anti-diabetic effect of curcuma xanthorrhiza on adipogenesis of 3t3-l1 preadipocyte. Regenerative Research, 3 (2). pp. 105-107. ISSN 2232-0822

Abdulhadi, Muhammad (2014) Production enhancement using multiphase pump. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ahmad, Syaza Izyanni and Hashim, Haslenda and Hassim, Mimi Haryani (2014) Safety, health, environmental and economic (SHEE) assessment of fertilizer production. Perintis E-Journal, 4 (2). pp. 1-26. ISSN 2232-0725

Akbar, Vahid and Abd. Hamid, Mohd. Kamaruddin (2014) Prediction of minimum fluidisation velocity using a CFD-PBM coupled model in an industrial gas phase polymerisation reactor. Journal of Engineering Science, 10 . pp. 95-105. ISSN 1823-3430

Al-Tamimi, Zayed Mohammed Salem (2014) Optimization of underbalanced hydraulics for an aerated mud system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical and Energy Engineering.

Alamaria, A. M. and Mohd. Nawawi, Mohd. Ghazali and Zamrud, Z. (2014) Chemical cross linking of sago/PVA blend membrane for pervaporation separation of water from ethyl acetate mixture. Journal of Advanced Research in Materials Science, 1 (1). pp. 14-21. ISSN 2289-7992

Almahdi, Mohammed Abdesalam (2014) The effect of salinity on polymer selection and oil recovery by polymer flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

B

Batri @ Badri, Mohd. Baidhowi (2014) Understanding of reservoir characterization in deepwater environment using deep directional electro-magnetic measurement tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Bistamam, Mohd. Shahril Amin and Azam, Mohd. Asyadi and Abdul Manaf, Nor Syafira and Goh, Pei Sean and Abd. Rashid, Mohd. Warikh and Ismail, Ahmad Fauzi (2014) An overview of selected catalytic chemical vapor deposition parameter for aligned carbon nanotube growth. Nanoscience & Nanotechnology-Asia, 4 (1). pp. 2-30. ISSN 2210-6820

D

Dolmat, N. and Kamarudin, K. S. N. and Paiman, S. (2014) Removal of carbon dioxide using emulsion liquid membrane containing n-methyldiethanolamine and piperazine in rotating disc contactor. Journal of Applied Sciences, 14 (13). pp. 1477-1480. ISSN 1812-5654

E

Esmail, Mohammed Jamal Alhaj (2014) The effect of nanoparticle types on carbon dioxide foam flooding in enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

H

Hamid, Hossein (2014) Pore-Scale Study of Transport and Mixing in Porous Media in the Context of Enhanced Oil Recovery. PhD thesis, Universiti Teknologi Malaysia.

Hamzah, Mohd. Hafiz (2014) The use of polypropylene beads in transporting different sizes of cuttings in water-based mud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Harison, Ammar Zarir (2014) Reservoir productivity restoration in dual-string completion well using perforation method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Hashemi Fard, Adeleh and Saffari, Seyed Ehsan and Adnan, Robiah (2014) The effective factors on the length of hospital stay for MI patients in Vasei hospital of Sabzevar in 2012 using regression models. Journal of Sabzevar University of Medical Science, 20 (4). pp. 447-456. ISSN 1606-7487

Hashim, Haslenda and Lim, Jeng Shiun (2014) Optimal design of energy model of oil palm eco-industrial town for green economic development in Iskandar Malaysia. International Journal Of Chemical And Environmental Engineering, 5 (3). pp. 168-171. ISSN 2078-0737

Hassan, Ruhana and Salim, Sa’Adiah and Ismail, Nurul Jannah and Ismail, Abdul Razak (2014) A lab scale study on the effects of waste lubricating oil to red tilapia oreochromis sp. juveniles. Borneo Journal of Resource Science and Technology, 4 (1). pp. 1-8. ISSN 2299-769

Hera, Elisabet Sabu (2014) Performance of nanoparticles as fluid loss additives in polymer-clay drilling fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

I

Idris, Ani and Othman, Norasikin and Nasruddin, Nur Alina and Jusoh, Norela (2014) Extraction of succinic from aqueous mixtures by emulsion liquid membrane process using amberlite la-2 as a carrier. Australian Journal Of Basic And Applied Sciences, 8 (24). pp. 76-81. ISSN 1991-8178

J

Jaafar, Mohd. Zaidi and Wan Sulaiman, Wan Rosli and Lebai Ismail, Abdul Razak and Anuar, S. M. M. (2014) Correlation study between streaming potential signal and waterfront progression during water alternate gas (WAG) injection. Journal Of Applied Sciences, 14 (17). pp. 1959-1965. ISSN 1812-5662

K

Kootiani, Reza Cheraghi and Samsuri, Ariffin (2014) A comprehensive and numerical modeling of reactive polymer flow in porous media. IOSR Journal of Engineering (IOSRJEN), 4 (1). pp. 32-37. ISSN 2278-8719

Kootiani, Reze Cheraghi and Samsuri, Ariffin (2014) Investigating the possibility of optimizing the water injection rate during water flooding in Iranian oil reservoirs. Journal of Basic and Applied Scientific Research, 4 (1). pp. 332-339. ISSN 2090-4304

L

Lai, Tak Oon (2014) Sago waste starch as fluid loss control agent in Water Based Mud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

M

Maghsoudloojafari, Hosseinali (2014) Internet plagiarism and factors contributing to plagiarism among accounting student in Azman Hashim International Business School. Masters thesis, Universiti Teknologi Malaysia.

Mat Nayan, Nadirul Hasraf and Wan Ab. Rahman, Wan Aizan and Abdul Majid, Rohah (2014) The effect of mercerization process on the structural and morphological properties of pineapple leaf fiber (PALF) pulp. Malaysian Journal of Fundamental and Applied Sciences, 10 (1). pp. 12-16. ISSN 1823-626X

Mohd. Faudzi, Mohd. Hafis Irsyad (2014) Effects of type of salt on nanoparticles-stabilized carbon dioxide foam in enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Najib, Suhaila and Idroas, Mariani and Ibrahim, Muhammad Nasir (2014) Data acquisition for optical tomography system based on complementary metaloxide semiconductor area image sensor. Australian Journal of Basic and Applied Sciences, 8 (23). pp. 8-14. ISSN 1991-8178

Mohsin, M. E. Ali and Arsad, Agus and Alothman, Othman Y. (2014) Enhanced thermal, mechanical and morphological properties of CNT/HDPE nanocomposite using MMT as secondary filler. International Journal of Chemical and Molecular Engineering, 8 (2). pp. 24-27. ISSN 1307-6892

Mohsin, Rahmat and Abdul Majid, Zulkifli (2014) The effects of fuel types on lubricating oil properties of bi-fuel motorcycle. World Applied Sciences Journal, 32 (3). pp. 505-511. ISSN 1818-4952

Muhamad, Ida Idayu and Krishnan, Saravanan and Salehan, A. Syukur and Ya'akob, Harisun and Mohamed Zulkifli, Razauden and Mohd. Shariff, Amir Husni (2014) Pretreatment and process to control mycotoxin in sustainable feed production using extracts of neem (Azadirachta indica). International Journal on Advanced Science, Engineering and Information Technology, 4 (2). pp. 4-8. ISSN 2088-5334

O

Omar, S. and Jaafar, Mohd. Zaidi and Ismail, Abdul Razak and Wan Sulaiman, Wan Rosli (2014) Relationship between foam stability and the generated electrokinetic signals during fawag processes. Journal of Applied Sciences, 14 (11). pp. 1123-1130. ISSN 1812-5662

R

Razali, Firdausi and Asli, Umi Aisah (2014) Improve quality of ultisols (pokok sena soil series) through phototropic bacteria application. International Journal of Advances in Chemical Eng, & Biological Sciences, 1 (1). pp. 46-50. ISSN 3491-507

S

Saidi, M. A. A. and Wan Ab. Rahman, Wan Aizan and A. Majid, Rohah (2014) Effect of different solvents on the thermal, IR spectroscopy and morphological properties of solution casted PLA/starch films. Malaysian Journal of Fundamental and Applied Sciences, 10 (1). pp. 33-36. ISSN 1823-626X

Samsuri, Ariffin (2014) Viscoelastic surfactants application in hydraulic fracturing, it's set back and mitigation - an overview. ARPN Journal of Engineering & Applied Sciences, 9 (1). pp. 25-29. ISSN 1819-6608

Samsuri, Ariffin and Kootiani, Reza Cheraghi and Mirali, Sasan and Chehrehgosha, Soroush (2014) Evaluation and modeling of steam drive in diatomite under reservoir conditions. International Journal of Manufacturing & Industrial Engineering, 1 (3). pp. 1-4. ISSN 2374-1589

Suahadah, S. N. and Nor Kamarudin, K. S. (2014) 2-amino-2-methyl-1-propanol as additive to enhance carbon dioxide removal by monoethanolamine emulsion liquid membrane. Journal of Applied Sciences, 14 (12). pp. 1324-1328. ISSN 1812-5654

Suahadah, S. N. and Nor Kamarudin, Khairul Sozana (2014) 2-amino-2-methyl-proponal as additive to enhance carbon dioxide removal by monoethanolamine emulsion liquid membrane. Journal of Applied Sciences, 14 (12). pp. 1324-1328. ISSN 1812-5654

T

Tan, Chee Seong (2014) Improve performance of different types of drilling fluids using nanomaterials. Masters thesis, Universiti Teknologi Malaysia.

Tuan Abdullah, Tuan Amran (2014) Evaluation of process parameters for graft copolymerization of glycidyl methacrylate to kenaf fiber using design of experiment method. Australian Journal of Basic and Applied Sciences, 10 . pp. 107-111. ISSN 1991-8178

W

Wan Salleh, Wan Norharyati and Sazali, N. and Ismail, Ahmad Fauzi (2014) Separation of CO2/CH4 through carbon tubular membranes: effect of carbonization temperature. Journal of Membrane and Separation Technology, 3 . pp. 219-223. ISSN 1929-6037