Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | F | G | H | I | J | K | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 147.

A

Abd. Razak, Azli and Hagishima, Aya and Ikegaya, Naoki and Mohamad, Mohd. Faizal and Zaki, Sheikh Ahmad (2013) Mean wind flow field around idealized block arrays with various aspect ratios. In: Applied Mechanics And Materials.

Abdul Manaf , Nur'azah (2013) Application of reproducing kernel to analyze the survival data of HIV positive patients. In: The Fourth International Conference On Science And Engineering (2013), 2013.

Abdul Manaf Hashim, (2013) Crystallization of electrodeposited germanium thin film on silicon (100). Materials, 6 (11). pp. 5047-5057. ISSN 1996-1944

Abdul Manaf Hashim, (2013) Orientation-control of ge-stripes-on-insulator by narrowing in rapid-melting growth from si(111) seed. ECS Solid State Letters, 2 (9). P76-P78. ISSN 2162-8742

Abdul Rachman, Mahyudin (2013) Integration system of hydrogen gas production from the waste of biodiesel and biomass with fuel cell using mutant enterobacter aerogenes. In: The Fourth International Conference on Science and Engineering .

Abdul Rani, Muhamad Norhisham (2013) Model updating for a thin steel sheet welded structure. In: 20th International Congress on Sound & Vibration, 2013.

Abdullah, (2013) Robust control of adaptive single input fuzzy logic controller for unmanned underwater vehicle. Journal of Theoretical and Applied Information Technology, 57 (3). pp. 372-379. ISSN 1992-8645

Abdullah, H. and Abu, A. and Muhamad, P. and Sahekhaini, A. and Quen, L. K. (2013) On theoretical of transmission loss in exhaust muffler system. In: Advanced Materials Research.

Abdullah Saleh, Mubarak and A. Mohammed, Salam and C. Abdullah, Ezzat and A. Hashim, Laith (2013) Enhancement the dissolution rate and solubility of poorly soluble drugs: review. In: Advanced Materials Research Vol. 701 (2013).

Abu, Aminudin (2013) A prediction of noise reduction of exhaust muffler system. In: the Fourth international Conference on Science and Engineering (ICSE 2013), 2013.

Abu, Aminudin (2013) Experimental study on the effectiveness of helical strakes in suppressing vortex-induced vibration of a flexible cylinde. In: MJIIT-JUC Joint International Symposium.

Abu , Aminudin (2013) Simulation and optimization studies of front and rear upright in a suspension system under static load conditions. In: MJIIT-JUC Joint International Symposium, 2013.

Abu Bakar, Nooh (2013) Design-to-cost framework in product design using Inventive Problem Solving Technique (TRIZ). In: 10th International Conference on Innovation and Management ICIM 2013.

Ahmad Khairudin, Nurulbahiyah (2013) Docking study of ß-glucosidase B (BglB) from P. polymyxca with cellobiose and cellotetrose. In: International Conference of Medical, Environmental and Biotechnology (ICMEB 2013).

Ahmad Khairudin , Nurulbahiyah (2013) Binding mode study of ß-glucosidase B from P. polymyxca with cellobiose and laminaribiose. In: International Conference of Computational Chemistry and Biology (ICCCB 2013), 2013.

Aid, Siti Rahmah (2013) Characterization of BF2, Ga and In Dopants in Si for halo implantation. In: The 13th International Workshop on Junction Technology.

AKM Muzahidul Islam, (2013) Multiple description discrete cosine transform-based image coding using dc coefficient relocation and ac coefficient interpolation. Journal of Electronic Imaging, 22 (2). ISSN 1017-9909

Alizadeh, Mojtaba and Hassan, Wan Haslina and Behboodian, Navid and Karamizadeh, Sasan (2013) A brief review of mobile cloud computing opportunities. Research Notes in Information Science, 12 . pp. 155-160. ISSN 2093-1956

Alizadeh, Mojtaba and Hassan, Wan Haslina (2013) Challenges and opportunities of mobile cloud computing. In: 2013 9th International Wireless Communications and Mobile Computing Conference, IWCMC 2013.

Aminuddin Abu, (2013) Development of a new sound quality metric for evaluation of the interior noise in a passenger car using the logarithmic mahalanobis distance. Proceedings of The Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (10). pp. 1363-1376. ISSN 0954-4070

Aminudin Abu, (2013) Reduction of vibration and noise in air compressor system using design of experiment method. Advanced Science Letters, 19 (1). pp. 54-60. ISSN 1936-6612

Anisuzzaman, Mohammad and Muta, Shunpei and Hashim, Abdul Manaf and Sadoh, Taizoh (2013) Effects of pattern dimensions on stabilization of crystal orientation for (111) ge-on-insulator in rapid melting growth. Research Reports on Information Science and Electrical Engineering of Kyushu University, 18 (2). pp. 69-74. ISSN 1342-3819

Anisuzzaman, Mohammad and Muta, Shunpei and Hashim, Abdul Manaf and Sadoh, Taizoh (2013) Orientation stabilized rapid melting growth of thin (100) ge-on-insulator structures and their implementation in homoepitaxial growth. Research Reports on Information Science and Electrical Engineering of Kyushu University, 18 (2). pp. 63-67. ISSN 1342-3819

Anthony Edward Robert Centeno, (2013) Au nanostructures by colloidal lithography: from quenching to extensive fluorescence enhancement. Journal of Materials Chemistry B, 1 (4). pp. 536-543. ISSN 2050-7518

Anthony Edward Robert Centeno, (2013) Diffuse scattering from hemispherical nanoparticles at the air-silicon interface. Nanotechnology, 24 (41). ISSN 0957-4484

Anthony Edward Robert Centeno, (2013) Plasmonic fluorescence enhancement by metal nanostructures: shaping the future of bionanotechnology. Physical Chemistry Chemical Physics, 15 (38). pp. 15709-15726. ISSN 1463-9076

Aras, M. S. M. and Ali, F. A. and Azis, F. A. and Abdullah, Shahrum Shah and Aziz, M. A. A. and Othman, M. Nur (2013) Development of wireless data transfer system on unmanned underwater vehicles application. International Journal of Engineering Research and Technology, 2 (10). pp. 1322-1330. ISSN 2278-0181

Aras, M. S. M. and Mohd. Nor, A. S. and Abdullah, Shahrum Shah and Z. A., Rashid M. and Jamali, A. (2013) Development of Subsea Altimeter Sensor System (SASS) using portable sonar sensor fish finder alarm for unmanned underwater vehicles. International Journal on Recent Trends in Engineering & Technology, 8 (2). pp. 110-115. ISSN 2158-5563

Aung, Lwin Moe (2013) Performance evaluation of jeep suspension using quarter and half car models. In: the Fourth international Conference on Science and Engineering , 2013.

Azhim, Azran and Ono, T. and Fukui, Yasuhiro and Morimoto, Yuji and Furukawa, K. and Ushida, T. (2013) Preparation of decellularized meniscal scaffolds using sonication treatment for tissue engineering. In: 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2013, 3rd-7th July 2013, Osaka, Japan.

B

B. Jivanadham, Lalitha and A.K.M., Muzahidul Islam and Katayama, Yoshiaki and Baharun, Sabariah and Komaki, Shozo (2013) Implementation of a secured dynamic wireless sensor network in Omnet++ modular. In: MJIIT-JUC Joint International Symposium (MJJIS 2013), 6th-8th November 2013, Tokyo..

Baharun , Sabariah (2013) Neighbor discovery in dynamic cluster based wireless sensor network. In: MJIIT-JUC Joint International Symposium 2013, 2013.

Baharun , Sabariah (2013) Spectrum agile cluster-based architecture forcognitive radio ad-hoc networks. In: MJIIT-JUC Joint International Symposium 2013, 2013.

C

Che-Aron, Z. and Abdalla, A. H. and Abdullah, K. and Hassan, W. H. (2013) Performance analysis of multi-radio routing protocol in cognitive radio ad hoc networks under different path failure rate. In: 5th International Conference on Mechatronics ICOm'13, 2013.

Chin, Ayub Abdullah and Ooi, Chia Yee (2013) Study on test compaction in high-level Automatic Test Pattern Generation (ATPG) platform. Circuits and Systems, 4 (4). pp. 342-349. ISSN 2153-1293

F

Fang, Xie and Anthony, Centeno and Bin, Zou and P. Ryan, Mary and Riley, D. Jason and Alford, Neil M. (2013) Tunable synthesis of ordered zinc oxide nanoflower-like arrays. Journal of Colloid and Interface Science, 395 (1). pp. 85-90. ISSN 0021-9797

Fukuda, Kanao and Hashimoto, Masaaki and Sugimura, Joichi (2013) Influences of trace water in hydrogen and argon on the tribological properties of pure iron. In: Proceedings Of The ASME/STLE International Joint Tribology Conference, IJTC 2012.

Fuminori Kobayashi, (2013) Dynamic reconfiguration of analog circuits for smaller-area filter implementation. Far East Journal of Electronics and Communications, 11 (1). pp. 35-45. ISSN 0973-7006

G

Ghani, Muhamad Fadli and Abdullah, Shahrum Shah (2013) Depth level control system using peripheral interface controller for underwater vehicle. International Journal of Robotics and Automation (IJRA), 2 (2). pp. 69-72. ISSN 2089-4856

H

Hamzah, Esah and Mudang, Maureen and Ang, Khwang Jenq and Khattak, Muhammad Adil (2013) High temperature creep behavior of austenitic fe-ni-cr alloy. In: Advanced Materials Research (Volume 686).

Hasim, Norhaslinda and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Mohamed Kassim, Anuar and Abdullah, Shahrum Shah (2013) Development of fuzzy logic water bath temperature controller using MATLAB. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012, 23-25 November 2012, Penang, Malaysia.

Hassan, Wan Haslina and Keshavarz, Hassan and Shozo, Komaki and Naoki, Ohshima (2013) Big data management: project and open issues. In: Proceedings of the 7th International Conference on Project Management (ProMAC2013).

Hiroshi, Nakanishi and Othman, Rozhan and Kunio, Igusa and Shozo, Komaki (2013) Global standardization education program collaborated by Osaka Univ. and MJIIT, UTM. Journal of ICT Standardization, 1 (1). pp. 59-82. ISSN 2245-800X

Hussien, L. F. and Abdalla, A. H. and Habaebi, M. H. and Khalifa, O. O. and Hassan, W. H. (2013) Evaluation of QoS supported in NEMO environments. In: 5th International Conference on Mechatronics ICOM'13.

I

Islam, A. K. M. Muzahidul (2013) Architectures and communication protocols on dynamic wireless sensor networks. In: Bit'S 2Nd annual World Congress of Emerging Infotech-2013.

Islam, A.K.M. Muzahidul (2013) Hajjnet: a cluster-based haji services network. In: International Conference on Engineering Education 2013 (Icee2013), 24-25 December 2013, Madinah,.

Islam, A.K.M. Muzahidul (2013) A proposal of body implement able early heart attack detection system. In: Malaysia-Japan International Institute of Technology (MJIIT), Japanese University Consortium Committee (Juc) Joint International Symposium (Mjjis 2013), November 6-8, 2013, Kanagawa, Japan, 2013.

Islam, Shayla and Abdalla, Aisha H. and Habaebi, Mohamed H. and Latif, Suhaimi A. and Hassan, Wan H. and Hasan, Mohammad.K. and Ramli, H. A. M. and Khalif, Othman O. (2013) A comparative signaling cost analysis of macro mobility scheme in NEMO with mobility management protocol. In: 5th International Conference on Mechatronics ICOM'13, 2013.

Ismail, I. and Mazlan, S. A. and Aqida, S. N. and Olabi, A. G. (2013) Full factorial design to study material parameters of magnetorheological fluid. In: Key Engineering Materials.

Ismail, Noorradiyah and Abd. Ghani, Rasli (2013) Advance in renewable energy using piezoelectric power-harvesting devices. In: Applied Mechanics And Materials, 26-28 October 2012, Hebei, China.

Ismail, Nordinah (2013) Low power FPGA design using dynamic partial reconfiguration with power gating. In: MJIIT-JUC Joint International Symposium 2013, 2013.

Ismail, Nordinah and Abd. Ghani, Rasli (2013) Advance devices using piezoelectric harvesting energy. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16 -17 December 2013, Putrajaya, Malaysia, 2013.

J

Jaapar, S. Z. S. and Morad, N. A. and Iwai, Y. (2013) Prediction of solubilities for ginger bioactive compounds in hot water by the cosmo-rs method. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013).

Jusoh, Samsiah and Zakaria, Zuriati and Din, Laily (2013) Isolation of astilbin from leaves of cratoxylum arborescens. Malaysian Journal of Analytical Sciences, 17 (3). pp. 430-435. ISSN 1394-2506

K

Kanao, Fukuda (2013) The influences of a hydrogen environment on the tribological properties of pure metals. In: World Tribology Congress 2013 , 8-13, Sep 2013, Torino, Italy.

Kanao Fukuda, (2013) Influences of trace water in a hydrogen environment on the tribological properties of pure iron. Tribology Online, 8 (1). pp. 22-27. ISSN 1881-218X

Kitajima, Tatsuo and Feng, Zhonggang (2013) Contribution of voltage-dependent ion channels to subthreshold resonance. In: 9th Asian Control Conference (ASCC), JUN 23-26, 2013, Istanbul, TURKEY.

Kitajima, Tatsuo (2013) Analysis of the contraction of fibroblast-collagen gels and the traction force of individual cells by a novel elementary structural model. In: 35th annual International Conference of the IEEE EMBS.

Kitajima, Tatsuo (2013) Contribution of nap-channels to the property of subthreshold resonance oscillation. In: The 13th International Conference on System Simulation (AsiaSim2013).

Kitajima, Tatsuo (2013) Network dynamics of the neurons with the subthreshold membrane resonatorance. In: JSST2013 International Conference on Simulation Technology , 2013.

Kobayashi, Akira (2013) Measurements of ablation phenomena on coaxial pulsed plasma thruster with separated propellant. Frontier of Applied Plasma Technology, 6 (2). pp. 51-56. ISSN 1883-5589

Kobayashi, Akira (2013) Metallic glass coatings fabricated by gas tunnel type plasma spraying. In: The 9th International Symposium of Applied Plasma Science, 23-27th September 2014, 2013, Istanbul, Turkey.

Komaki, Shozo and Amiri, Ehsan and Keshavarz, Hassan and Ohshima, Naoki (2013) Resource allocation in grid : a review. In: International Conference on Innovation, Management and Technology Research, 2013.

M

Mansoor, Nafees and A. K. M, Mazidul Islam and Baharun, Sabariah and Komaki, Shozo and Wada, Koichi (2013) CoAd: a cluster based adhoc cognitive radio networks architecture with broadcasting protocol. In: 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013, 17th-18th May 2013, Dhaka, Bangladesh.

Matsumoto, Satoru (2013) Self diffusion in si using highly pure isotope. In: BIT's 3rd annual World Congress of Nanoscience and Nanotechnology-2013, 2013.

Megat Johari Megat Mohd. Noor, (2013) Effect of the packaging and storage conditions on the coagulation activity of spray-dried salt-extracted moringa oleifera. Desalination and Water Treatment, 51 (7-9). pp. 1947-1953. ISSN 1944-3994

Megat Mohd. Noor, Megat Johari (2013) Bridging engineering and technology education. The Saudi Journal of Higher Education (9). pp. 49-70. ISSN 1658-1113

Mohamad Noor, Mardiana and Hassan, Wan Haslina (2013) Current threats of wireless networks. In: 3rd International Conference on digital Information Processing and Communications DICTAP 2013, Czech Republic.

Mohamad Noor, Mardiana and Hassan, Wan Haslina (2013) Wireless networks: developments, threats and countermeasures. International Journal of Digital Information and Wireless Communication (IJDIWC), 3 (1). pp. 119-134. ISSN 2225-658X

Mohamed Mahmoud Nasef, (2013) Composite proton conducting membrane by radiation-induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoroethylene) and phosphoric acid doping. High Performance Polymers, 25 (2). pp. 198-204. ISSN 0954-0083

Mohamed Mahmoud Nasef, (2013) Modeling, prediction, and multifactorial optimization of radiation-induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) films using statistical simulator. Journal of Applied Polymer Science, 127 (3). pp. 1659-1666. ISSN 0021-8995

Mohamed Mahmoud Nasef, (2013) Preparation and characterization of phosphoric acid composite membrane by radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetrafluoroethylene) followed by phosphoric acid doping. Journal of Applied Polymer Science, 128 (1). pp. 549-557. ISSN 0021-8995

Mohamed Sukri Mat Ali, (2013) Aeolian tones generated by a square cylinder with a detached flat plate. AIAA Journal, 51 (2). pp. 291-301. ISSN 0001-1452

Mohammed Amin, Muhamad Kamal (2013) Fuzzy controller modelling of a ph level control system. In: 32nd JSST annual Conference JSST 2013 International Conference on Simulation Technology, 11-13 Sept, 2013, Meiji Univ. Surugadai Campus, Japan.

Mohammed Amin, Muhamad Kamal (2013) Indexing analysis by MATLAB on thermal imaging application. In: 12th International Conference on Applied Computer and Applied Computational Science (ACACOS '13), 2nd-4th April 2013, Kuala Lumpur, Malaysia.

Mohammed Amin, Muhamad Kamal and Mahamad, Nurhashinmah (2013) Effect of number of hidden neuron in multilayer perceptron for power prediction. In: 32nd JSST annual Conference JSST 2013 International Conference on Simulation Technology, 11-13 Sept, 2013, Meiji Univ. Surugadai Campus, Japan.

Mohammed Amin, Muhamad Kamal and Mahamad, Nurhashinmah (2013) Power prediction analysis using artificial neural network in MS excel. In: 7th International Conference on Renewable Energy Sources (RES '13), 2nd-4th April 2013, 2013, Kuala Lumpur, Malaysia.

Mohammed Amin, Muhamad Kamal and Mohamed, Aimi Zafirah (2013) Biologically inspired analysis on thermal image segmentation by MATLAB. In: 32nd JSST annual Conference JSST 2013 International Conference on Simulation Technology, 11-13 Sept, 2013, Meiji Univ. Surugadai Campus, Japan.

Mohd. Azizi Abdul Rahman, (2013) Model-based development and simulation for robotic systems with sysml, simulink and simscape profiles. International Journal of Advanced Robotic Systems, 10 . ISSN 1729-8806

Mohd. Mahdzir , Akbariah (2013) Capatilizing multiple intelligence viewpoint in cognitive development and creativity. In: International conference on school based assessment: Psychometric Assessment: Assessment for the 21st century.

Mohd. Rashid Mohd. Yusof, (2013) Evaluation of particulate emission from a palm oil mill boiler. Sains Malaysiana, 42 (9). pp. 1289-1292. ISSN 0126-6039

Mohd. Shamsuddin, Norazizi and Aminudin, B. A. and Zetty, M.I. (2013) Systematic fea study of vehicle exhaust system hanger location using Addofd Method. In: Applied Mechanics And Materials.

Mohd. Yusof, Mohd. Rashid and H., Norelyza (2013) Performance of MR-Deduster on particulate emission control for a different area of axial entry. Journal of Environmental Research Development, 7 (4). pp. 1392-1398. ISSN 2319-5983

Mohd. Yusof, Mohd. Rashid and H., Norelyza (2013) Performance of MR-Deduster: a case study of a palm oil mill plant. Advanced Materials Research, 664 (n/a). pp. 133-137. ISSN 1662-8985

Morad, Noor Azian (2013) Comparison study between CLEAR SWE prototype and Accelerated Solvent Extraction (ASE 200): effect of temperature using subcritical water as solvent. In: International Conference on Separation Technology 2013 (IcoST 2013), 2013.

Morad, Noor Azian (2013) Effect of extraction time and kinetic studies on degradation of bioactive compounds (zingiber officinale roscoe). In: International Conference on Separation Technology 2013 (IcoST 2013), 2013.

Morad, Noor Azian (2013) Effect of natural yeast fermentation from oil palm trunk sap for the production of ethanol. In: 2013 Joint of Japan/Taiwan/Korea Chemical Engineering Conference, 2013.

Mubarak, N. M. and Alicia, R. F. and Abdullah, Ezzat Chan and Sahu, J. N. and Ayu Haslija, A. B and Tan, J. (2013) Statistical optimization and kinetic studies on removal of zn2+ using functionalized carbon nanotubes and magnetic biochar. Journal of Environmental Chemical Engineering, 1 (3). pp. 486-495. ISSN 2213-3437

Muhamad, Halimah and Ramli, Mohd Izwarie and Zakaria, Zuriati and Sahid, Ismail (2013) The fate of diuron in soil in a Malaysian oil palm plantation. Journal of Oil Palm Research, 25 (1). pp. 149-158. ISSN 1511-2780

Muhamad, Pauziah (2013) Magneto rheological for motorcycle suspension using bouc-wen model. In: The 2013 International Conference on Kinematics, Mechanics of Rigid Bodies, and Materials (KINEMATICS 2013),.

Muhamad, Pauziah (2013) Modelling behavior for magneto rheological motorcycle suspension system. In: 2nd International Conference on Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013), 2013.

Muhamad, Pauziah (2013) Modelling behaviour and bouc-wen model for magneto rheological motorcycle suspension system. In: Aun/Seed-Net Regional Conference on Mechanical and Manufacturing Engineering (RCMME 2013), 2013.

Muhamad, Pauziah (2013) Conditioned and orthogonalised reverse path nonlinear identification methods to a mass isolator (part 1: a simulation). In: AUN/SEED Net Regional Conference on Mechanial and Manufacturing Engineering (RCMME) 2013.

Muzahidul Islam, A. K. M. (2013) Simulation for evaluation: a study on the performance evaluation of WSNs MAC protocols. In: Malaysia-Japan International Institute of Technology (MJIIT) and Japanese University Consortium Committee (JUC) Joint International Symposium (MJJIS 2013), November 6-8, 2013, 2013, Japan.

Muzahidul Islam, A. K. M. and Wada, K. and Chen, W. (2013) Dynamic cluster-based architecture and data congregation protocols for wireless sensor network. International Journal of Innovative Computing, Information and Control, 9 (10). pp. 4085-4099. ISSN 1349-4198

Muzahidul Islam, Arshad K. M. and Zeb, Asim and Wada, Koichi (2013) Communication protocols on dynamic cluster-based wireless sensor network. In: 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013, 17-18 May 2013, Dhaka, Bangladesh.

N

Nasher, Essam and Lee, Yook Heng and Zakaria, Zuriati and Surif, Salmijah (2013) Assessing the ecological risk of polycyclic aromatic hydrocarbons in sediments at Langkawi Island, Malaysia. Scientific World Journal . ISSN 1537-744X

Noor Azmi, Azran Azhim (2013) In vivo study of implanted aortic scaffolds decellularized by sonication treatment. In: MJIIT-JUC Joint International Symposium 2013.

Noriyuki, Kuwano (2013) Can "look-east policy" be made effective? Materia Japan . ISSN 1340-2625

Noriyuki Kuwano, (2013) Backscattered electron imaging at low emerging angles: a physical approach to contrast in LVSEM. Ultramicroscopy, 135 . pp. 43-49. ISSN 0304-3991

Nurulbahiyah Ahmad Khairudin, (2013) Structurally conserved binding sites of hemagglutinin as targets for influenza drug and vaccine development. Journal of Chemical Information and Modeling, 53 (9). pp. 2423-2436. ISSN 1549-9596

O

Ohshima, Naoki (2013) A study of concept structure of PMBOK based on graph theory. In: Proceedings of the 10th International Conference on Innovation & Management 2013, 2013.

Ohshima, Naoki (2013) A study of project management process path using network analysis technique. In: Proceedings of the 7th International Conference on Project Management (ProMAC2013), 2013.

Ooi, Chia Yee (2013) Dynamic reconfiguration of circuits using PSoC analog FPGAs. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 2013.

Ooi, Chia Yee (2013) Energy minimization for built-in self-test in system on-chip. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 2013.

Ooi, Chia Yee (2013) Toward a green electronic world: a low power design-for-testability architecture. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 2013.

Ooi Chia Yee, (2013) A semi-analytical approach to study the energy consumption of on-chip networks testing. Journal of Low Power Electronics, 9 (2). pp. 189-197. ISSN 1546-1998

Othman, Nor'azizi and Taegon, Kim and Akinobu, Imamura and Jin, Miyawaki and Isao, Mochida and Seong, Ho Yoon (2013) Investigation on H2S removal factors of activated carbons derived from waste palm trunk. Journal of Novel Carbon Resource Sciences, 7 . pp. 7-11. ISSN 21657025

Othman, Rozhan and Poon, June M. L. and Jo, Ann Ho (2013) Effects of personal need for structure on cognitive and affective learning: a small scale pilot experimental study. Effective Education, 4 (2). pp. 123-135. ISSN 19415540

P

Pauziah Muhamad, (2013) Damage detection in static beams via wavelet-based technique. Advanced Science Letters, 19 (2). pp. 433-438. ISSN 1936-6612

Pauziah Muhamad, (2013) Optimization of the lower arm of a vehicle suspension system for road noise reduction by sensitivity analysis. Mechanism and Machine Theory, 69 . pp. 278-302. ISSN 0094-114X

R

Rory William Padfield, (2013) The price of knowledge in the knowledge economy: should development of peatland in the UK support a research levy? Land Use Policy, 32 . pp. 50-60. ISSN 0264-8377

Rusli, Mohd. Shahrizal and Ooi, Chia Yee and Kobayashi, Fuminori and Shaikh Husin, Nasir and Marsono, Muhammad Nadzir (2013) Run-time network-on-chip thermal and power balancing. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 6-8 Nov. 2013, Hiratsuka, Japan.

S

Saiful Amri Mazlan, (2013) A phenomenological dynamic model of a magnetorheological damper using a neuro-fuzzy system. Smart Materials and Structures, 22 (12). ISSN 0964-1726

Saiful Amri  Mazlan, (2013) A design and modelling review of rotary magnetorheological damper. Materials & Design, 51 . pp. 575-591. ISSN 0261-3069

Samsuri, Norazreen and Shaikh Salim, Sheikh Ahmad Zaki and Musa, Md. Nor and Jaafar, Abu Bakar (2013) A pre-review study of ocean thermal energy conversion cycle with different working fluids. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 6-8 November 2013, Hiratsuka, Japan.

Sara, Y. Y. and Rashid, M. and Chuah, T. G. and Suhaimi, M. and Mohamed, N. N. (2013) Characteristics of airborne pm2.5 and pm2.5-10 in the urban environment of Kuala Lumpur. In: Advanced Materials Research.

Sardool Singh, Gurminder Kaur and Kuppan, Perumal and Goto, Masafumi and Sugiura, Norio and Megat Mohd. Noor, Megat Johari and Ujang, Zaini (2013) Physical water quality and algal density for remediation of algal blooms in tropical shallow eutrophic reservoir. Journal of Novel Carbon Resource Sciences, 7 (n/a). pp. 33-41. ISSN 1884-6300

Shahrum Shah Abdullah, (2013) Thruster modelling for underwater vehicle using system identification method regular paper. International Journal of Advanced Robotic Systems, 10 . ISSN 1729-8806

Shahrum Shah Abdullah, (2013) Development and modeling of unmanned underwater remotely operated vehicle using system identification for depth control. Journal of Theoretical and Applied Information Technology, 56 (1). pp. 136-145. ISSN 1992-8645

Shaikh Salim, Sheikh Ahmad Zaki and Khalid, Hirda Lailani and Hagishima, Aya (2013) Preliminary survey of household energy use behaviour in Malaysia. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 6-8 November 2013, Hiratsuka, Japan.

Songip, Ahmad Rahman (2013) Creation of value through the transformation program in Universiti Teknologi Malaysia. In: 10th International Conference on Innovation and Management - ICIM 2013 .

Songip, Ahmad Rahman (2013) A crowdsourcing learner-centered knowledge management framework integrated with social media and gamification. In: MJIIT-JUC Joint international Symposium 2013, 2013, Tokai University, Japan..

Songip, Ahmad Rahman (2013) Towards the attainment of a high income nation by 2020: the need fornew leadership styles and characteristics in the ICT industry in Malaysia. In: MJIIT-JUC Joint International Symposium 2013, 2013, Tokai University, Japan.

Songip , Ahmad Rahman (2013) Solid waste management in Malaysia: status, challenges and future strategies. In: MJIIT-JUC Joint International Symposium 2013, 2013, Tokai University, Japan.

Sugimura, Joichi and Fukuda, Kanao and Hashimoto, Masaaki and Tanaka, Hiroyoshi (2013) Hydrogen permeation in austenitic stainless steel and some metals in sliding contact. In: 2013 STLE annual Meeting, May 5-9, 2013, 2013, Detroit, Michigan.

Suzzaman, Mohammad Ani and Muta, Shunpei and Hashim, Abdul Manaf and Sadoh, Taizoh (2013) Effects of pattern dimensions on stabilization of crystal orientation for (111) geoninsulator in rapid melting growth. Research Reports on Information Science and Electrical Engineering of Kyushu University, 18 (2). pp. 69-74. ISSN 1342-3819

T

Tatsuo, Kitajima (2013) Spontaneous beat behavior of circular engineered cardiac tissue. In: JSST2013 International Conference on Simulation Technology , 2013.

Toshio Wakabayashi, (2013) Unidirectional antenna using two-probe excited circular ring above square reflector for polarization diversity with high isolation. Progress In Electromagnetics Research, 133 . pp. 159-176. ISSN 1070-4698

W

Wakabayashi, Toshio (2013) Band notch characteristics of a UWB planar antenna with an elliptical element comprising single slots. In: Progress In Electromagnetics Research Symposium (PIERS 2013 Taipei).

Wakabayashi, Toshio (2013) Dual band notched characteristics of an elliptical UWB planar antenna. In: 2nd Asia Pacific Conference on Antennas and Propagation ( APCAP 2013 ), 2013.

Wan Haslina Hassan, (2013) Implementation and evaluation of lightweight encryption algorithms suitable for RFID. Journal of Next Generation Information Technology, 4 (1). pp. 65-77. ISSN 2092-8637

Wong, S. and Ooi, C. Y. and Hau, Y. W. and Marsono, M. N. and Shaikh-Husin, N. (2013) Feasible transition path generation for EFSM-based system testing. In: Proceedings - IEEE International Symposium on Circuits and Systems.

Y

Yahya, Hafizal (2013) Influence of growth time and current density on the morphological and compositional of zinc oxide nanostructures deposited on graphene by electrochemical. In: MJIIT-JUC Joint international Symposium 2013 (MJJIS2013), 2013.

Yahya, Wira Jazair and Ani, Farid Nasir and Samion, Syahrullail and Golshokouh, Iman (2013) Palm fatty acid distillate as an alternative source for hydraulic oil. In: Applied Mechanics And Materials.

Yahya, Wira Jazair and M.I, Izhan and Abdul Kadir, Mohammed Rafiq and Samion, Syahrullail (2013) Experimental study on the effect of different speeds applied with palm olein using pin-on-disk teste. In: Applied Mechanics And Materials.

Yahya, Wira Jazair and Paramasivam, Kishokanna and Rajoo, Srithar (2013) Study on noise generation in a high speed centrifugal fan. In: Advanced Materials Research.

Yahya, Wira Jazair (2013) A review on micro-explosion phenomena in water-in-diesel emulsion fuel. In: MJIIT-JUC Joint International Symposium 2013 (MJJIS2013), 6-8 November, 2013, Tokai University, Japan .

Yazid, I. M. and Mazlan, S. A. and Zamzuri, H. and Mughni, M. J. and Chuprat, S. (2013) Parameters consideration in designing a magnetorheological damper. In: Materials And Applications For Sensors And Transducers II.

Yugeswaran, Subramaniam and Akira, Kobayashi (2013) Formation of metal coatings on PET substrates by gas tunnel type plasma spraying process. Frontier of Applied Plasma Technology, 6 (1). pp. 21-24.

Z

Zainal Ariffin, Nur Hamizah and Mahmood, Mohamad Rusop and Hashim, Abdul Manaf and Yahaya, Hafizal (2013) Backside drill of Si/SiO2 supporting structure using PCB prototyping engraver for graphene nanopore devices application. In: MJIIT-JUC Joint international Symposium 2013 (MJJIS2013), 2013.

Zuriati Zakaria, (2013) Chemical components and bioactivity of the marine-derived fungus paecilomyces sp collected from Tinggi Island, Malaysia. Chemistry of Natural Compounds, 49 (4). pp. 621-625. ISSN 0009-3130

Zuriati Zakaria, (2013) Concentrations and sources of polycyclic aromatic hydrocarbons in the seawater around Langkawi Island, Malaysia. Journal of Chemistry . ISSN 2090-9063

Zuriati Zakaria, (2013) Isolation of astilbin from leaves of cratoxylum arborescens. Malaysian Journal of Analytical Sciences, 17 (3). pp. 430-435. ISSN 1394-2506

Zuriati Zakaria, (2013) Limit of detection and limit of quantification development procedures for organochlorine pesticides analysis in water and sediment matrices. Chemistry Central Journal, 7 . ISSN 1752-153X

Zuriati Zakaria, (2013) One-pot synthesis of 2-substituted 4h-3,1-benzoxazin-4-one derivatives under mild conditions using iminium cation from cyanuric chloride/dimethylformamide as a cyclizing agent. Chemistry Central Journal, 7 (1). ISSN 1752-153X

Zuriati Zakaria, (2013) A qualitative analysis of litsea fulva essential oils using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry. Sains Malaysiana, 42 (7). pp. 943-948. ISSN 0126-6039

This list was generated on Thu Sep 21 03:38:45 2017 +08.