Universiti Teknologi Malaysia Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 65.

Jasmi, Kamarul Azmi and Ahmad, Azura and Jamarluddin, Izzatul Amanda (2013) Al-Quran dan biologi. In: Penciptaan Manusia dari Perspektif al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 49-73. ISBN 978-983-52-0915-4

Jasmi, Kamarul Azmi and Selamat, 'Atiqah (2013) Al-Quran dan Fizik. In: Sains Asas, fizik, kimia dan geografi dari perspektif al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 23-38. ISBN 978-983-52-0913-0

Jasmi, Kamarul Azmi and Ahmad Zawawi, Nurliyana (2013) Al-Quran dan geografi. In: Sains asas, fizik, kimia dan geografi dari perspektif Al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 55-81. ISBN 978-983-52-0913-0

Jasmi, Kamarul Azmi and Hassan, Noordyana (2013) Al-Quran dan geologi. In: Geologi, hidrologi, oceanografi dan astronomi dari perspektif Al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 1-19. ISBN 978-983-52-0914-7

Jasmi, Kamarul Azmi and Mohd. Hanafiah, Nur Syazwani (2013) Al-Quran dan oceanografi. In: Geologi, hidrologi, oceanografi dan astronomi dari perspektif Al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 43-59. ISBN 978-983-52-0914-7

Jasmi, Kamarul Azmi and Samseh, Siti Hafshar (2013) Al-Quran dan tenaga suria. In: Botani, zoologi dan tenaga dari perspektif Al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 33-47. ISBN 978-983-52-0928-4

Jasmi, Kamarul Azmi and Mat Udin, Syarah (2013) Al-Quran dan zoologi. In: Botani, zoologi dan tenaga dari perspektif Al-Quran. Universiti Teknologi Malaysia Press, Skudai, Johor Bahru, pp. 17-31. ISBN 978-983-52-0928-4

Jasmi, Kamarul Azmi and Selamat, ‘Atiqah (2013) Al-Quran satu mukjizat yang menakjubkan. In: Penciptaan Manusia dari Perspektif Al-Quran. Universiti Teknologi Press, Skudai, Johor Bahru, pp. 1-18. ISBN 978-983-52-0915-4

Ishak, M. I. and Abdul Kadir, M. R. (2013) Anatomical considerations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-8. ISBN 9783642326028

Olanrewaju, O. S. and Ab. Kader, A. S. (2013) Applying the Safety and Environmental Risk and Reliability Model (SERM) for Malaysian langat river collision aversion. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 193-225. ISBN 978-146664318-5

Remli, M. A. and Deris, S. (2013) An approach for biological data integration and knowledge retrieval based on ontology, semantic web services composition, and AI planning. In: Bioinformatics: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 1727-1744. ISBN 978-146663605-7

Sultana, N. (2013) Biodegradable PHBV polymer-based scaffolds for bone tissue engineering. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 43-60.

Ishak, M. I. and Abdul Kadir, M. R. (2013) Biomechanical considerations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 27-36. ISBN 9783642326028

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Biomechanical properties and behaviours of the wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 13-24. ISBN 9783642319051

Ishak, M. I. and Abdul Kadir, M. R. (2013) Biomechanics in dentistry: evaluation of different surgical approaches to treat atrophic maxilla patients. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Bone and prosthetic component responses in various occlusal loading directions. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 67-86. ISBN 9783642326028

Ishak, M. I. and Abdul Kadir, M. R. (2013) Bone and prosthetic component responses in various occlusal loading locations. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 53-66. ISBN 9783642326028

Abdul-Aziz, A. and Yaakob, H. and Aziz, R. and Rahman, R. A. and Ngadiran, S. and Muhammad, M. F. and Harun, N. H. and Zamri, W. M. W. and Rosly, E. S. (2013) Case study: Statistical analysis of eurycomanone yield using a full factorial design. In: Mathematical and Statistical Methods in Food Science and Technology. wiley, pp. 43-54. ISBN 978-111843463-5

Fauzi, A. H. M. and Amin, N. A. S. (2013) Catalysis in biodiesel synthesis: challenges and future perspectives. In: Advances in Biofuels. Springer US, pp. 127-152. ISBN 978-146146249-1

Lai, K. W. and Supriyanto, E. (2013) Clinical tests and measurements. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 95-108. ISBN 978-9-81-402195-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Computational biomechanics of the wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag. ISBN 978-364231905-1

Norshidah, Mohamed and Valaei, Naser and Abdul Karim, Nor Shahriza (2013) A conceptual framework of antecedents and impacts of knowledge quality on SMEs’ competitiveness. In: Mathematics and Computers in Contemporary Science. World Scientific and Engineering Academy and Society, pp. 187-194. ISBN 978-960-474-356-8

Hum, Y. C. (2013) Conclusion and future works. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 127-129. ISBN 978-981445165-9

Hum, Y. C. (2013) Design and implementation. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 47-98. ISBN 978-981445165-9

Lai, K. W. and Supriyanto, E. (2013) Designs and implementation of three dimensional nuchal translucency. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 47-94. ISBN 978-981402195-1

Ibrahim, N. and Jensen, P. A. and Dam-Johansen, K. and Hamid, M. K. A. and Kasmani, R. M. and Ali, R. R. (2013) Experimental investigation of combustion behavior of flash pyrolysis oil. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 181-187. ISBN 978-146146208-8

Darehshori, Elnaz Farhang and Mohamed, Norshidah (2013) Exploring IT professionals’ intention to use software development risk assessment framework. In: Latest Trends in Applied Computational Science. World Scientific and Engineering Academy and Society, pp. 143-148. ISBN 978-1-61804-171-5

Puteh, M. and Habil, H. and Azli, N. A. (2013) External quality audits and quality assurance in the higher education sector: The Malaysian perspective. In: External Quality Audit: Has It Improved Quality Assurance in Universities? Elsevier Inc., pp. 99-115. ISBN 978-184334676-0

Sultana, N. (2013) Fabrication techniques and properties of scaffolds. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 19-42. ISBN 978-364234801-3

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Finite element analysis of the wrist arthroplasty in rheumatoid arthritis. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 59-69. ISBN 978-364231905-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Finite element analysis of the wrist joint affected by rheumatoid arthritis. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 41-58. ISBN 978-364231905-1

Ishak, M. I. and Abdul Kadir, M. R. (2013) Finite element modelling. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 37-52. ISBN 978-364232602-8

Bajuri, M. N. and Abdul Kadir, M. R. (2013) Finite element modelling of the healthy wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 33-40. ISBN 978-364231905-1

Lai, K. W. and Supriyanto, E. (2013) Future improvements. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 109-111. ISBN 978-981402195-1

Illias, R. M. and Ramli, A. N. M. and Low, K. O. and Muhammad Mahadi, N. and Abdul Murad, A. M. and Rabu, A. (2013) Heterologous expression of proteins from cold-adapted yeasts in suitable hosts: methods and applications. In: Cold-adapted Yeasts: Biodiversity, Adaptation Strategies and Biotechnological Significance. Springer-Verlag Berlin Heidelberg, pp. 481-496. ISBN 978-364239681-6

Ghavamian, A. and \xD6chsner, A. (2013) Influence of atomic defects on the mechanical properties of carbon nanotubes. In: Handbook of Functional Nanomaterials. Nova Science Publishers, Inc., pp. 415-432. ISBN 978-162948172-2

Mohamed, Norshidah and Mahadi, Batiah and Miskon, Suraya and Haghshenas, Hanif and Muhd. Adnan, Hafizuddin (2013) Information system integration: a review of literature and a case analysis. In: Mathematics and Computers in Contemporary Science. World Scientific and Engineering Academy and Society, pp. 68-77. ISBN 978-960-474-356-8

Norazli, O. and Noor Ezlin, A. B. and Muhd. Noor, M. Y. and Shreeshivadasan, C. and Nor’azizi, O. (2013) The integrated solid waste management system: its implementation and impacts towards the environment. In: Causes, Impacts and Solutions to Global Warming. Springer New York, pp. 657-673. ISBN 978-146147588-0

Ghazali, R. and Zakaria, N. H. (2013) Knowledge management processes in enterprise systems: a systematic literature review. In: Enterprise Resource Planning: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 160-181. ISBN 978-146664154-9

Hum, Y. C. (2013) Literature reviews. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 11-45. ISBN 978-981445165-9

Hamid, S. S. and Nasir, M. H. N. M. and Sahibuddin, S. and Nor, M. K. M. (2013) Managing software projects with team software process (TSP). In: Software Design and Development: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 1550-1583. ISBN 978-146664302-4

Lai, K. W. and Supriyanto, E. (2013) Medicine and engineering related researches on the utility of two dimensional nuchal translucency. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 11-45. ISBN 978-981402195-1

Ahmad, M. F. and Siang, A. Y. (2013) Modelling of hydrodynamics and sediment transport at Pantai Tok Jembal, Kuala Terengganu Mengabang Telipot, Terengganu, using MIKE 21. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 109-126. ISBN 978-146664318-5

Afrinaldi, F. and Mat Saman, M. Z. and Shaharoun, A. M. (2013) A new methodology for integration of end-of-life option determination and disassemblability analysis. In: Treatise on Sustainability Science and Engineering. Springer Netherlands, pp. 31-49. ISBN 978-940076229-9

Mohamed, Norshidah and Mobasheri, Sahar (2013) Perceptions of e-marketing, social media, individuals and purchase intention - what can we learn from research? In: Mathematics and Computers in Contemporary Science. World Scientific and Engineering Academy and Society, pp. 166-174. ISBN 978-960-474-356-8

Lallmahomed, M. Z. I. and Ab. Rahim, N. Z. and Ibrahim, R. and Rahman, A. A. (2013) A preliminary classification of usage measures in information system acceptance: a q-sort approach. In: Technology Diffusion and Adoption: Global Complexity, Global Innovation. IGI Global, pp. 105-129. ISBN 978-146662792-5

Ong, P. Y. and Lee, C. T. and Sarmidi, M. R. and Awad, H. M. and Chua, L. S. and Razali, F. (2013) Production of extracellular 5-aminolevulinic acid by rhodopseudomonas palustris in solid-state fermentation. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 173-179. ISBN 978-146146208-8

Solemon, B. and Sahibuddin, S. and Ghani, A. A. A. (2013) Requirements engineering process improvement and related models. In: Software Design and Development: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 203-218. ISBN 978-146664302-4

Hum, Y. C. (2013) Result and discussion. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 99-126. ISBN 978-981445165-9

Ab Kader, A. S. and Olanrewaju, O. S. (2013) River transportation master plan study for environmental enhancement. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 178-184. ISBN 978-146664318-5

Kim, D. W. and Suhaimi, M. A. and Kim, B. M. and Cho, M. H. and Chen, F. F. (2013) Rough cut machining for impellers with 3-axis and 5-axis NC machines. In: Lecture Notes in Mechanical Engineering. Springer Heidelberg, pp. 609-616.

Sultana, N. (2013) Scaffolds for tissue engineering. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-17. ISBN 978-364234801-3

Samah, N. A. (2013) Seeing with new eyes: becoming a narrative inquirer in higher education practice. In: Contextualising Narrative Inquiry: Developing Methodological Approaches for Local Contexts. Taylor and Francis, pp. 89-107. ISBN 978-020307170-0

Md. Yunus, M. A. M. and Mukhopadhyay, S. C. and Rahman, M. S. A. and Zahidin, N. S. and Ibrahim, S. (2013) The selection of novel planar electromagnetic sensors for the application of nitrate contamination detection. In: Smart Sensors, Measurement and Instrumentation. Springer International Publishing, pp. 171-195.

Shahid, S. (2013) Spatial assessment of drought hazard, vulnerability and risk in Bangladesh. In: Droughts: New Research. Nova Science Publishers, Inc., pp. 215-241. ISBN 978-162100769-2

Ali, R. R. and Rahman, W. A. W. A. and Ibrahim, N. B. and Kasmani, R. M. (2013) Starch-based biofilms for green packaging. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 347-354. ISBN 978-146146208-8

Othman, S. H. (2013) Supporting domain ontology through a metamodel: a disaster management case study. In: Crisis Management: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 1019-1037. ISBN 978-146664708-4

Amin, N. S. and Tahir, M. (2013) Syngas production and applications for greenhouse gas mitigation. In: Syngas: Production, Applications and Environmental Impact. Nova Science Publishers, Inc., pp. 269-295. ISBN 978-162100870-5

Ishak, M. I. and Abdul Kadir, M. R. (2013) Treatment options for severely atrophic maxillae. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 9-26. ISBN 978-364232602-8

Maimun, A. and Nursyirman, I. F. and Sian, A. Y. and Samad, R. and Oladokun, S. (2013) Using AIS data for navigational risk assessment in restricted waters. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 245-254. ISBN 978-146664318-5

Olanrewaju, O. S. and Ab. Kader, A. S. and Saharuddin, A. H. (2013) Utilization of simulation for training enhancement. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 277-289. ISBN 978-146664318-5

Ghafoor, K. Z. and Mohammed, M. A. and Bakar, K. A. and Sadiq, A. S. and Lloret, J. (2013) Vehicular cloud computing: trends and challenges. In: Mobile Networks and Cloud Computing Convergence for Progressive Services and Applications. IGI Global, pp. 262-274. ISBN 978-146664782-4

Wan Alwi, S. R. and Manan, Z. A. (2013) Water pinch analysis for water management and minimisation: an introduction. In: Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions. Elsevier Inc., pp. 353-382. ISBN 978-085709725-5

Bajuri, M. N. and Abdul Kadir, M. R. (2013) The wrist joint affected by rheumatoid arthritis. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 25-32. ISBN 978-364231905-1

Bajuri, M. N. and Abdul Kadir, M. R. (2013) The wrist joint. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 1-12. ISBN 978-364231905-1

This list was generated on Sat Feb 24 03:53:33 2018 +08.