Items where Division is "Chemical Engineering" and Year is 2013

Article

A. Shirazi, Mohammad Mahdi and Kargari, Ali and Bazgir, Saeed and A. Shirazi, Mohammad Javad and Abdullah, Mohd. Sohaimi and Tabatabaei, Meisam and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2013) Characterization of electrospun polystyrene membrane for treatment of biodiesel's water-washing effluent using atomic force microscopy. Desalination, 329 . pp. 1-8. ISSN 0011-9164

Abba, Ahmad Halilu and Zainon Noor, Zainura and Yusuf, Rafiu O. and M. D. Din, Mohd. Fadhil and Abu Hassan, Mohd. Ariffin (2013) Assessing environmental impacts of municipal solid waste of Johor by analytical hierarchy process. Resources Conservation and Recycling, 73 . pp. 188-196. ISSN 0921-3449

Abdul Rahman, Roshanida and Amira, R. Dayana and Mohd. Setapar, Siti Hamidah and Rosli, Md. Illias (2013) Biodegradation of oil palm residues into compost using filamentous fungi. Advanced Science Letters, 19 (12). pp. 3529-3533. ISSN 1936-6612

Abu Bakar Sidik, Dilaeleyana and Ngadi, Norzita and Saidina Amin, Nor Aishah (2013) Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid. Bioresource Technology, 135 . pp. 690-696. ISSN 0960-8524

Ahmad, Arshad and Yeoh, Phooi Ling and W. Ali, Mohamad and Ripin, Adnan and Haron, Saharudin (2013) Human factor in equipment safety of hard disk manufacturing. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 9-14. ISSN 0127-9696

Akos, Noel Ibrahim and Wahit, Mat Uzir and Mohamed, Rahmah and Yussuf, Abdirahman Ali (2013) Comparative studies of mechanical properties of poly(ε-caprolactone) and poly(lactic acid) blends reinforced with natural fibers. Composite Interfaces, 20 (7). pp. 459-467. ISSN 0927-6440

Aroona, Mohammad Ali and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2013) Beta-cyclodextrin functionalized MWCNT: a potential nano-membrane material for mixed matrix gas separation membranes development. Separation and Purification Technology, 115 . pp. 39-50. ISSN 1383-5866

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab (2013) Estimation of potential barium sulfate (barite) precipitation in oilfield brines using a simple predictive tool. Environmental Progress and Sustainable Energy, 32 (3). pp. 860-865. ISSN 1944-7442

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab (2013) A novel analytical method predicts plug boundaries of Bingham plastic fluids for laminar flow through annulus. Canadian Journal of Chemical Engineering, 91 (9). pp. 1590-1596. ISSN 0008-4034

Baradaran, Ali and Sieo, Chin Chin and Foo, Hooi Ling and Md. Illias, Rosli and Yusoff, Khatijah and Abdul Rahim, Raha (2013) Cloning and in silico characterization of two signal peptides from Pediococcus pentosaceus and their function for the secretion of heterologous protein in Lactococcus lactis. Biotechnology Letters, 35 (2). pp. 233-238. ISSN 0141-5492

Che Yunus, Mohd. Azizi and Arsad, Nur Husnina and Zhari, Salman and Idham, Zuhaili and Setapar, Siti Hamidah and Mustapha, Ana Najwa (2013) Effect of supercritical carbon dioxide condition on oil yield and solubility of Pithecellobium Jiringan (Jack) Prain seeds. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 45-50. ISSN 0127-9696

Che Yunus, Mohd. Azizi and Hasan, Manzurudin and Othman, Norasikin and Mohd. Setapar, Siti Hamidah and Md. Salleh, Liza and Ahmad Zaini, Muhammad Abbas and Idham, Zuhaili and Zhari, Salman (2013) Effect of particle size on the oil yield and catechin compound using accelerated solvent extraction. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 21-25. ISSN 0127-9696

Chua, Kien Hui and Lee, Ting Hun and Nagandran, Kamini and Md. Yahaya, Nor Hamdan and Lee, Chew Tin and Tan, Eddie Ti Tjih and Abdul Aziz, Ramlan (2013) Edible bird's nest extract as a chondro-protective agent for human chondrocytes isolated from osteoarthritic knee: in vitro study. BMC Complementary and Alternative Medicine, 13 . ISSN 1472-6882

Farsi, Ali and Shadravan, Vahid and Mansouri, Seyed Sohil and Zahedi, Gholamreza and Abdul Manan, Zainuddin (2013) A new reactor concept for combining oxidative coupling and steam re-forming of methane: modeling and analysis. International Journal of Energy Research, 37 (2). pp. 129-152. ISSN 0363-907X

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) Prototyping of polymer based microbioreactors: micromachining by using poly(methyl methacrylate) and poly(dimethylsiloxane) polymer materials. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 35-41. ISSN E–ISSN 2180–3722

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) A low cost stirring platform with integrated temperature control scheme for microbioreactor operation. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 1-8. ISSN E-ISSN 2180-3722

ham, Weng Hong and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq and Wong, Tuck Whye (2013) Mechanical and thermal properties of biodegradable hydroxyapatite/poly(sorbitol sebacate malate) composites. Songklanakarin Journal of Science and Technology, 35 (1). pp. 57-61. ISSN 0125-3395

Hashim, Haslenda (2013) Numerical descriptive technique for inherent safety assessment in petrochemical industry. Process Safety and Environmental Protection, n/a (n/a). n/a. ISSN n/a

Hashim, Noor Haza Fazlin and Bharudin, Izwan and Law, Douglas Sie Nguong and Higa, Sakura and Abu Bakar, Farah Diba and Nathan, Sheila and Rabu, Amir and Kawahara, Hidehisa and Md. Illias, Rosli and Najimudin, Nazalan and Mahadi, Nor Muhammad and Abdul Murad, Abdul Munir (2013) Characterization of Afp1, an antifreeze protein from the psychrophilic yeast glaciozyma antarctica PI12. Extremophiles, 17 (1). pp. 63-73. ISSN 1431-0651

Hassim, Mimi Haryani and Hurme, Markku and Edwards, David W. and Aziz, Nik N. N. A. and Rahim, Fariha L. M. (2013) Simple graphical method for inherent occupational health assessment. Process Safety and Environmental Protection . ISSN 0957-5820

Ho, Wai Shin and Hashim, Haslenda and Lim, Jeng Shiun (2013) Combined design and load shifting for distributed energy system. Clean Technologies and Environmental Policy, 15 (3). pp. 433-444. ISSN 1618-954X

Hossain, Shakil Imam and Hasan, Mahbub M. and Hasan, Md. Nazmul and Hassan, Azman (2013) Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber. Advances In Materials Science and Engineering . ISSN 1687-8434

Ismail, Issham and Mamat, Nur Suriani and Mamat, Baihaqi and Ismail, Ahmad Shamsulizwan and Kamis, Azmi and Ikhsan, Azman (2013) Improving gas bubbles' half life in foam drilling fluid. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 103-110. ISSN 0127-9696

K.Nair, Abhinav and M. Isloor, Arun and Kumar, Rajesha and Ismail, Ahmad Fauzi (2013) Antifouling and performance enhancement of polysulfone ultrafiltration membranes using CAVO3 nanoparticles. Desalination, 322 . pp. 69-75. ISSN 0011-9164

Khatoon, Asma and Mohd. Setapar, Siti Hamidah and Ahmad, Akil and Lee, Nian Yian (2013) Analytical methodologies for determination of amitriptyline and its metabolite nortriptyline: a review. Der Pharma Chemica, 5 (3). pp. 79-85. ISSN 0975-413X

Lai, Jau Choy and Wan Abdul Rahman, Wan Aizan and Toh, Wen Yee (2013) Characterisation of sago pith waste and its composites. Industrial Crops and Products, 45 . pp. 319-326. ISSN 0926-6690

Lee, Tin Sin and Bee, Soo Tueen and Tee, Tiam Ting and Kadhum, Abdul Amir Hassan and Ma, Chi and Rahmat, Abdul Razak and Veerasamy, P. (2013) Characterization of α-tocopherol as interacting agent in polyvinyl alcohol-starch blends. Carbohydrate Polymers, 98 (2). pp. 1281-1287. ISSN 0144-8617

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin (2013) Centralised utility system planning for a total site heat integration network. Computers & Chemical Engineering, 57 . pp. 104-111. ISSN 0098-1354

Long, Wee Lai and Idris, Ani (2013) Disruption of oil palm trunks and fronds by microwave-alkali pretreatment. Bioresources, 8 (2). pp. 2792-2804. ISSN 1930-2126

Maarof, Saleha and Deraman, Karim and Wan Shamsuri, Wan Nurulhuda and Ismail, Bakar and Mat, S.Asiah (2013) Microstructure studies of strontium titanate thin films prepared by so-gel dip-coating method. Malaysian Journal of Fundamental and Applied Sciences, 9 (3). pp. 134-138. ISSN 1823-626X

Majidnia, Zohreh and Idris, Ani and Valipour, Peiman (2013) Evaluation of antibacterial properties of leather treated with silver nanoparticles. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 5-8. ISSN 0127-9696

Moazeni, Nima and Mohamad, Zurina and Faisal, Nor Liyana Izzati and Tehrani, Mahsa A. and Dehbari, Nazila (2013) Anticorrosion epoxy coating enriched with hybrid nanozinc dust and halloysite nanotubes. Journal of Applied Polymer Science, 130 (2). pp. 955-960. ISSN 0021-8995

Mohamad, Mardawani and Ali, Mohamad Wijayanuddin and Ripin, Adnan and Ahmad, Arshad (2013) Effect of extraction process parameters on the yield of bioactive compounds from the roots of eurycoma longifolia. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 51-57. ISSN 0127-9696

Mohamad Aziz, Siti Norazimah and Mohd. Setapar, Siti Hamidah and A. Rahman, Roshanida (2013) Characteristic of binary mixtures AOT/TWEEN 85 reverse micelle for amoxicillin solubilisation. Journal of Bionanoscience, 7 (2). pp. 195-201. ISSN 1557-7910

Mohamed Noor, Norhayati and Abd. Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan (2013) The effect of virgin coconut oil loaded solid lipid particles (VCO-SLPs) on skin hydration and skin elasticity. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 39-43. ISSN 0127-9696

Mohammad, Nor Nisa Balqis and Arsad, Agus (2013) Mechanical, thermal and morphological study of kenaf fibre reinforced RPET/ABS composites. Malaysian Polymer Journal, 8 (1). pp. 8-13. ISSN 1823-7789

Mohd. Nawawi, Mohd. Ghazali and Zamrud, Zafifah and Idham, Zuhaili and Hassan, Onn and Mohd. Sakri, N. (2013) Blended chitosan and polyvinyl alcohol membrane for pervaporation separation methanol/methyl tert-butyl ether mixture. (Ii) effect of operating parameters. Jurnal Teknologi (Sciences and Engineering), 65 (1). pp. 39-43. ISSN 0127-9696

Mohd. Nazri, Noor Aina and Lau, Woei Jye and Ismail, Ahmad Fauzi and Saidin, Mohammad Abdul Razis (2013) Improved performance of PAN-based UF membrane with PAN-G-PVA amphiphilic copolymer. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 73-76. ISSN 0127-9696

Mohd. Yusof, Abdul Halim and Mohamed Amin, Mohamed Afizal and Ismail, Ahmad Fauzi and Anam, Muhammad Noorul and Nik Mahmud, Nik Azmi (2013) Fabrication and effect of sulfonated poly (Ether Ether Ketone) with Cloisite15A® nanoclays for microbial fuel cell application. International Journal of Sustainable Construction Engineering & Technology, 4 (1). pp. 63-74. ISSN 2180-3242

Naim, Rosmawati and Khulbe, Kailash Chandra and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2013) Characterization of PVDF hollow fiber membrane for CO2 stripping by atomic force microscopy analysis. Separation and Purification Technology, 109 . pp. 98-106. ISSN 1383-5866

Ngadi, Norzita and Arsad, Nurul Jannah and Roslan, Noor Azuin (2013) Treatment of textile wastewater using chitosan and chitosan grafted acrylamide by microwave synthesis. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 97-104. ISSN E-ISSN 2180-3722

Oh, Selina Siew Ling and Storms, Reginald and Yun, Zheng and Mohd. Rodzi, Mohd. Rohaizad and Mahadi, Nor Muhammad and Md. Illas, Rosli and Abdul Murad, Abdul Munir and Abu Bakar, Farah Diba (2013) Development of a PYRG mutant of aspergillus oryzae strain S1 as a host for the production of heterologous proteins. Scientific World Journal . ISSN 1537-744X

Othman, Norasikin and Ooi, Zing Yi and Harruddin, Norlisa (2013) Liquid membrane formulation for removal of kraft lignin from simulated liquid waste solution. Malaysian Journal of Fundamental and Applied Sciences, 9 (1). pp. 41-45. ISSN 1823-626X

Pirdashti, Mohsen and Curteanu, Silvia and Kamangar, Mehrdad Hashemi and Hassim, Mimi Haryani and Khatami, Mohammad Amin (2013) Artificial neural networks: applications in chemical engineering. Reviews In Chemical Engineering, 29 (4). pp. 205-239. ISSN 0167-8299

Gohari, R. Jamshidi and Lau, Woei Jye and Matsuura, Takeshi and Halakoo, Elnaz and Ismail, Ahmad Fauzi (2013) Adsorptive removal of Pb(ii) from aqueous solution by novel PES/HMO ultrafiltration mixed matrix membrane. Separation and Purification Technology, 120 . pp. 59-68. ISSN 1383-5866

Rasit Ali, Roshafima and W. A. Rahman, W. A. and Kasmani, R. M. and Hasbullah, H. and Ibrahim, N. and Sadikin, A. N. and Asli, U. A. (2013) Characterization and degradation analysis of tapioca starch based biofilms. International Journal of Chemical Science and Engineering, 7 (12). pp. 561-564. ISSN 2010-376X

Sarah, Maya and Taib, Mohd. Rozainee (2013) Microwave sterilization of oil palm fruits: temperature profile during enzymatic destruction process. Procedia Chemistry . ISSN 1876-6196

Setiabudi, Herma Dina and Teh, L. P. and Abdul Jalil, Aishah (2013) Effect of iridium loading on the formation of protonic acid sites over ir/pt-hzsm5. Malaysian Journal of Fundamental and Applied Sciences, 9 (1). pp. 10-15. ISSN 1823-626X

Song, S. T. and Saman, N. and Johari, K. and Mat, H. B. (2013) Removal of mercury (II) from aqueous solution by using rice residues. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 67-73. ISSN E-ISSN 2180-3722

Sung, Suet Yen and Lee, Tin Sin and Tee, Tiam Ting and Bee, Soo Tueen and Rahmat, Abdul Razak and Wan Abdul Rahman, Wan Aizan and Tan, Ann Chen and Vikhraman, M. (2013) Antimicrobial agents for food packaging applications. Trends In Food Science & Technology, 33 (2). pp. 110-123. ISSN 0924-2244

Tahir, Muhammad and Saidina Amin, Nor Aishah (2013) Advances in visible light responsive titanium oxide-based photocatalysts for CO2 conversion to hydrocarbon fuels. Energy Conversion and Management, 76 . pp. 194-214. ISSN 0196-8904

Taib, Mohd. Rozainee (2013) Microwave sterilization of oil palm fruits: review on electromagnetic, physical, chemical and biological parameters. International Journal of Advances in Applied Sciences . ISSN 2252-8814

Taib, Mohd. Rozainee and Muhamad, Ida Idayu and Ngo, Chee Loong and Ng, Pang Soon (2013) Drying kinetics, rehydration characteristics and sensory evaluation of microwave vacuum and convective hot air dehydrated jackfruit bulbs. Jurnal Teknologi (Sciences and Engineering), 65 (1). pp. 51-57. ISSN 0127-9696

Tan, Wee Leng and Muhamad, Ida Idayu and Abang Zaidel, Dayang Norulfairuz and Khairuddin, Nozieana (2013) Evaluation of capsaicinoids extracts as bioactive substance for antimicrobial films. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 69-74. ISSN 0127-9696

Tan, Yi Jun and Muhamad, Ida Idayu and Shaharuddin, Shahrulzaman (2013) Alternative source of beta-glucan from oil palm (elaeis guineensis) trunk fiber. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 63-68. ISSN 0127-9696

Teh, Liam Chee and Abdul Gaffar, Rozilawati and Abdul Majid, Fadzilah Adibah and Sarmidi, Mohammad Roji (2013) Herbal extract decolourization device using activated carbon. Jurnal Teknologi (Sciences and Engineering), 61 (1). pp. 73-79. ISSN 0127-9696

Wan Abu Bakar, Wan Azelee and Mat Rosid, Salmiah Jamal and Ali, Rusmidah (2013) Methanation reaction over samarium oxide based catalysts. Malaysian Journal of Fundamental and Applied Sciences, 9 (1). pp. 28-34. ISSN 1823-626X

Ya'aini, Nazlina and Saidina Amin, Nor Aishah (2013) Catalytic conversion of lignocellulosic biomass to levulinic acid in ionic liquid. Bioresources, 8 (4). pp. 5761-5772. ISSN 1930-2126

Yuniarto, Adhi and Noor, Zainura Zainon and Ujang, Zaini and Olsson, Gustaf and Aris, Azmi and Hadibarata, Tony (2013) Bio-fouling reducers for improving the performance of an aerobic submerged membrane bioreactor treating palm oil mill effluent. Desalination, 316 . pp. 146-153. ISSN 0011-9164

Yunos, Muhamad Zaini and Harun, Zawati and Basri, Hatijah and Shohur, Mohd. Fikri and Jamalludin, Mohd. Riduan and Hassan, Sulaiman and Ismail, Ahmad Fauzi (2013) Influence of inorganic additives on the performance of polysulfone ultrafiltration membrane. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 111-115. ISSN 0127-9696

Book Section

Abdul-Aziz, A. and Yaakob, H. and Aziz, R. and Rahman, R. A. and Ngadiran, S. and Muhammad, M. F. and Harun, N. H. and Zamri, W. M. W. and Rosly, E. S. (2013) Case study: Statistical analysis of eurycomanone yield using a full factorial design. In: Mathematical and Statistical Methods in Food Science and Technology. wiley, pp. 43-54. ISBN 978-111843463-5

Ali, R. R. and Rahman, W. A. W. A. and Ibrahim, N. B. and Kasmani, R. M. (2013) Starch-based biofilms for green packaging. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 347-354. ISBN 978-146146208-8

Amin, N. S. and Tahir, M. (2013) Syngas production and applications for greenhouse gas mitigation. In: Syngas: Production, Applications and Environmental Impact. Nova Science Publishers, Inc., pp. 269-295. ISBN 978-162100870-5

Fauzi, A. H. M. and Amin, N. A. S. (2013) Catalysis in biodiesel synthesis: challenges and future perspectives. In: Advances in Biofuels. Springer US, pp. 127-152. ISBN 978-146146249-1

Ibrahim, N. and Jensen, P. A. and Dam-Johansen, K. and Hamid, M. K. A. and Kasmani, R. M. and Ali, R. R. (2013) Experimental investigation of combustion behavior of flash pyrolysis oil. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 181-187. ISBN 978-146146208-8

Illias, R. M. and Ramli, A. N. M. and Low, K. O. and Muhammad Mahadi, N. and Abdul Murad, A. M. and Rabu, A. (2013) Heterologous expression of proteins from cold-adapted yeasts in suitable hosts: methods and applications. In: Cold-adapted Yeasts: Biodiversity, Adaptation Strategies and Biotechnological Significance. Springer-Verlag Berlin Heidelberg, pp. 481-496. ISBN 978-364239681-6

Ong, P. Y. and Lee, C. T. and Sarmidi, M. R. and Awad, H. M. and Chua, L. S. and Razali, F. (2013) Production of extracellular 5-aminolevulinic acid by rhodopseudomonas palustris in solid-state fermentation. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 173-179. ISBN 978-146146208-8

Wan Alwi, S. R. and Manan, Z. A. (2013) Water pinch analysis for water management and minimisation: an introduction. In: Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions. Elsevier Inc., pp. 353-382. ISBN 978-085709725-5

Conference or Workshop Item

Abba, A. H. and Noor, Z. Z. and Aliyu, A. and Medugu, N. I. (2013) Assessing sustainable municipal solid waste management factors for Johor-Bahru by analytical hierarchy process. In: Advanced Materials Research.

Abdul Ghani, Siti Waqina and Abu Bakar, Aznizam and Samsudin, Sani Amril (2013) Mechanical properties of chitosan modified montmorillonite filled tapioca starch nanocomposite films. In: Advanced Materials Research (Volume 686).

Abdul Haq, R. H. and Wahab, M. S. and Wahit, M. U. B. (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: Applied Mechanics And Materials.

Adrus, Nadia and Ulbricht, Mathias (2013) The rubber elasticity of poly(n-isopropylacrylamide) hydrogel networks. In: Advanced Materials Research.

Ardhyananta, Hosta and Abdul, Fakhreza and Widyastuti, Widyastuti and Sulistijono, Sulistijono and Hassan, Azman and Kurniawan, Denni (2013) Tensile and thermal properties of Bambusa arundinacea and Dendrocalamus asper culm fibers. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and A. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: Advanced Materials Research, 26-27 March 2013, Penang, Malaysia.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and Abd. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 November 2012, Penang, Malaysia.

Che Yunus , Mohd. Azizi (2013) Effect of surface mercerization and surfactant adsorption on banana trunk fiber to benzene adsorption. In: 4th ICOWOBAS-RAFSS 2013, Johor Bahru, Malaysia, 3-5 September 2013.

Hassan, Nor Diana and Muhamad, Ida Idayu and Sarmidi, Mohammad Roji (2013) The effect of copigmentation on the stability of butterfly pea anthocyanins. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov, 2013, Bandung, Indonesia.

Ilbeygi, H. and Ismail, Ahmad Fauzi and Nasef, Mohamed Mahmoud and Jaafar, J. and Jalalvandi, E. and Panahi, P. (2013) Electerochemical study of speek/cloisite 15a (r)/tap membrane at moderate temperature for DMFC application. In: Advances In Applied Materials And Electronics Engineering Ii.

Jamaluddin, J. and Lee, M. C. (2013) Curing properties of uv-cured pressure sensitive adhesives. In: Advanced Materials Research.

Jawaid, M and Hassan, Azman and Abdul Khalil, H.P.S (2013) Effect of coupling agent on mechanical and thermal behaviour of oil palm/jute hybrid composites. In: Green Technologies For Sustainable & Innovation In Materials.

Johari, Khairiraihanna and Saman, Norasikin and Shiow, Tien Song and Mat, Hanapi and Stuckey, David C. (2013) Utilization of coconut milk processing waste as a low-cost mercury sorbent. In: Industrial And Engineering Chemistry Research.

Laftah, W. A. and Hashim, S. (2013) Preparation and possible agricultural applications of polymer hydrogel composite as soil conditioner. In: Advanced Materials Research.

M. Zahari, M. Shahrir and Ismail, Shahrul and Ibrahim, Mohd. Zamri and Su, Shiung Lam and Mat, R. (2013) Study of enhanced reactive extraction process using ultrasonication for Jatropha curcas seed. In: Applied Mechanics and Materials, 30-31 Oct, 2013, Melaka, Malaysia.

Mad, Ramli and Samsudin, Rubyatul Adawiyah and Mohamed, Mahadhir and Johari, Anwar M. and Kamaruddin, Mohd. Johari and Ali, Asmadi H. (2013) Trans-esterification of triglycerides with methanol on sulfated zirconia prepared with different concentration of sulfuric acid. In: International Conference on Mechanical Engineering, ICOME 2013, 19-21 Sep, 2013, Mataram, Lombok, Indonesia.

Mat Desa, Mohd Shaiful Zaidi and Hassan, Azman and Arsad, Agus (2013) The effect of natural rubber toughening on mechanical properties of poly(lactic acid)/ multiwalled carbon nanotube nanocomposite. In: Advanced Materials Research (Volume 747).

Mustapha, Siti Noor Hidayah and Rahmat, Abdul Razak and Arsad, Agus and Shoot, Kian Yeong (2013) Novel bio based resins from blends of functionalized palm oil and unsaturated polyester resin. In: 1st International Conference on the science & engineering of materials. (ICoSEM 2013), 2013.

Ramli, N. A. S. and Amin, N. A. S. (2013) Ionic solid nanomaterials: synthesis, characterization and catalytic properties investigation. In: Advanced Materials Research.

Rithwan, Fahim and Zhari, Salman and Che Yunus, Mohd Azizi and Mohd H, Hafiza (2013) Efficacy of biological activity of andrographis paniculata extracted by using supercritical Carbon dioxide (SC-CO2) extraction. In: International Conference on Separation Technology 2013 (ICOST 2013).

Rosli, S. E. and Mohd-Norddin, M. N. A. and Jaafar, J. and Sudirman, R. (2013) Study on catalyst loading using speek/CSMM membrane in DMFC. In: Proceedings Of The 2013 IEEE 7th International Power Engineering And Optimization Conference (PEOCO2013).

Saiman, M. P. B. and Wahab, M. S. B. and Wahit, M. U. B. (2013) The effect of compression temperature and time on 2D woven kenaf fiber reinforced acrylonitrile-butadiene-styrene (ABS). In: Applied Mechanics And Materials.

Wan Alwi, Sharifah Rafidah and Peng, Yen Liew and Jeng, Shiun Lim and Klemes, Jiri (2013) An effective framework for total site heat recovery systems retrofit. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2013), 2013.

Yazdani, Z. and Naderipour, A. and Kamsah, M. Z. (2013) Renewable energy and carbon footprint emission at University Technology Malaysia (UTM). In: Advanced Materials Research.

Zeimaran, Ehsan and Bahraeian, Sobhan and Ghanbari, Taravat and Pourshahrestani, Sara and Mohd. Nor, Hussin (2013) Synthesis and characterization of supramolecular elastomers from polyacids composed of vegetable oils. In: Advanced Materials Research.

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2013) Hydraulic fracturing candidate-well selection by interval type-2 fuzzy set and system. In: International Petroleum Technology Conference 2013: Challenging Technology and Economic Limits to Meet the Global Energy Demand, IPTC 2013, 2013, Beijing, China.

Thesis

Tahir, Muhammad (2013) Carbon dioxide reduction to fuels using modified titanium nanocatalysts in monolith photoreactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Panahi, Pouye (2013) Biodiesel production from Jatropha curcas seed in batch reactor using microwave catalyzed by zeolite catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aalinezhad, Seyedeh Sara (2013) Transesterification of triacetin by aminated fibrous polymer catalyst in a batch process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abbasi, Mohammad Reza (2013) A mathematical model for water and energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Halim, Khairul Azhar (2013) Renewable resources polyol as chain extenders for waterborne polyurethane dispersion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Halim Yun, Hafizah (2013) Hydrogen production from glycerol using copper and nickel loaded zeolite based catalyst. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Wahab, Mohd. Khairul Hakimi (2013) Thermostability improvement of xylanase using error-prone polymerase chain reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abel, Stashia Eleaness Roland (2013) The extraction of essential oil from Quercus Infectoria galls using supercritical carbon dioxide pressure swing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu Bakar Sidik, Dilaeleyana (2013) Synthesis and characterization of renewable carbon cryogel beads from empty fruit bunch for adsorption of ethyl orange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Awang, Nuha (2013) Synthesis of metals stearate and thermal degradation study of polystyrene metals stearate blends. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Azman, Muhammad Danial (2013) High cell density cultivation on Hendersonia sp. for the application of biological control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bagheri, Ali (2013) Formulation and characterization of ginger-loaded niosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bazmi, Aqeel Ahmed (2013) Superstructure optimization and forecasting of decentralized energy generation based on palm oil biomass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bidsorkhi, Hossein Cheraghi (2013) Effect of sepiolite content on mechanical, thermal and flammability properties of ethylene vinyl acetate nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuah, Wei Sze (2013) Segregated problem table algorithm for simultaneous targeting and design of integrated energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehghani, Mohammadreza (2013) Optimal design of water recovery network with improved operability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Halakoo, Elnaz (2013) Separation of reactive dyes using PES/SPEEK blend nanofiltration membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Har, Jonathan Sean Hou (2013) Fugitive emission estimation from storage tank and wastewater treatment units. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasan, Manzurudin (2013) Extraction of catechin from areca catechu seeds using accelerated water extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hussin, Siti Hasmah (2013) Adsorption of bovine serum albumin onto immobilized cobalt microporous and mesoporous silica adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ibrahim, Akos Noel (2013) Preparation and characterization of oil palm fiber reinforced poly(e-caprolactone)/poly(lactic acid) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Busari Bolaji (2013) A graphical cost-screen technique for carbon management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Mohamad Al Hafiz (2013) Preparation and characterization of compatibilized polypropylene / poly (acrylonitrile-butadiene-styrene) blends and nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Atikah (2013) Kenaf and rice husk filled polypropylene composites containing ammonium polyphosphate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jalaludin, Noorbaizura (2013) Biodegradation of fresh palm oil mill effluent and fungal biomass protein recovery by aspergillus niger and trichoderma virens. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamal, Siti Noorashikin (2013) Skin extracted pineapple juice as pulping and bleaching agent in papermaking process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Juiani, Siti Fairuz (2013) Nickel removal from electroless nickel plating wastewater using chitosan-membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jumari, Nur Fazirah (2013) Melt flow index estimation using neural network models for propylene polymerization process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kashinath, Shah Aznie Ariffi (2013) Formulation of green diesel blends and finding potential chemicals as biofuels using computer-aided technique. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Koay, Yee Farn (2013) Rheological behavior of polyamide-6/linear low density polyethylene grafted maleic anhydride/monmorillonite nanocomposites and statistical model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laftah, Waham Ashaier (2013) Preparation and characterization of biodegradable polyacrylic acid based hydrogel for agricultural application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lawal, Sirajo (2013) Optimization of operating volume of microbioreactor using attainable region approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Jun You (2013) Extraction and identification of proteins and their antioxidant activities from Acacia, Tualang and Gelam honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Jeng Shiun (2013) Optimal design and synthesis of rice supply chain. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmud, Hafizah (2013) Enhanced secretion of cyclodextrin glucanotransferase in lactococcus lactis using heterologous signal peptide and optimization of induction condition for cultivation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mamat, Nur Suriani (2013) Improving cuttings lifting performance using styrene divinylbenzene microsphere in foam drilling fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Hasan, Noorliyana (2013) Methane emission prediction and trading from anaerobic palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mazangi, Mojtaba (2013) Gasification of empty fruit brunch in micro fixed bed reactor for hydrogen production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Arshad, Siti Hadjar (2013) Preparation of activated carbon from oil palm empty fruit bunch for adsorption of phenol and hydrogen. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Noor, Siti Fadilla (2013) Treatment of sulfidic spent caustic by integrated system of Fenton oxidation and activated carbon absorption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Moghaddam, Alireza Layegh (2013) Biodiesel production using aminated fibrous polymer catalyst in packed continuous reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, Mardawani (2013) Optimal operating conditions of Eurycoma Longifolia extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Aziz, Siti Norazimah (2013) Characterization and optimization of mix anionic-nonionic reverse micelle system for Amoxicillin extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed, Musliha (2013) Mechanical and flammability properties of hybrid recycled newspaper/sepiolite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Noor, Norhayati (2013) Solid lipid particles for improved dermal delivery of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Tap, Fatahiya (2013) Simulation of folding pathway studies of TRP-cage miniprotein, Amyloid A4 peptide and α-conotoxin RgIa peptide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Tap, Fatahiya (2013) Simulation of folding pathway studies of trp-cage miniprotein, amyloid A4 peptide, and a-conotoxin RgIA peptide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammad, Soheilmoghaddam (2013) Regenerated cellulose/halloysite nanotube nanocomposite films prepared with an ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamud, Mohamed Ali (2013) Optimization of medium using response surface methodology for erythromycin production by Saccharoplyspora Erythraea. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Noor, Nurzyyati (2013) Probiotic viability and sensory properties of ice-cream supplemented with encapsulated Lactobacillus bulgaricus. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Sani, Noor Faezah (2013) Synthesis and characterization of biodegradable poly (xylitol sebacate dodecanoate) nano-hydroxyapatiten composites for potential used in biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Sani, Noor Faezah (2013) Synthesis and characterization of biodegradable poly(xylitol sebacate dodecanoate)/ nano-hydroxyapatite composites for potential used in biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Yusoff, Noor Izyan Syazana (2013) Mechanical and thermal properties of poly(methyl methacrylate)-grafted-oil palm empty fruit bunch/talc hybrid filled poly(vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Yusoff, Noor Izyan Syazana (2013) Mechanical and thermal properties of poly(methylmethacrylate)-grafted-oil palm empty fruit bunch /talc hybrid filled poly (vinyl chloride) compsites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nabgan, Walid (2013) Hydrogen production from the acetic acid steam reforming over bimetallic nickel-cobalt supported on lathanum (III) oxide catalyst. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Naddafian, Amirhossein (2013) Preparation and charactrization of modified poly (ETHER ETHER KETONE) (PEK-WC) nanofiltration membrane for water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nor Hassan, Nor Sarizal (2013) Characterization and biodegradation of poly (vinyl alcohol)/cassava starch. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nordin, Nur Dianaty (2013) Development of microbial fuel cell using speek/cloisite 15A membrane for electricity generation from palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nouruddeen, Zahrau Bamalli (2013) Quality and stability of canola and sunflower oils blended with palm olein during frying and microwave heating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Oko, Augustine Agha (2013) An integrated energy and water footprint for office building sustainable green management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Nabihah (2013) Selection of inherently safer solvent for extraction of value added materials from palm oil using theoretical approach. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Siti Nadzirah (2013) Life cycle assessment of an integrated solid waste management system in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Purbaya, Mili (2013) Synthesis and characterization of supramolecular polymer based on linoleic acid of sunflower oil. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rafiei, Alireza (2013) Design of carbon dioxide absorption from polluted city air. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rafiei, Alireza (2013) Design of carbon dioxide absorption from polluted city air. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rahmanian, Amin (2013) Carbon dioxide capture from reforming gases using acetic acid modified chemical absorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rosland Abel, Stashia Eleaness (2013) The extraction of essential oil from Quercus infectoria (Manjakani) galls using supercritical carbon dioxide pressure swing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rosli, Dayana Amira (2013) Bioconversion optimization of oil palm residues into compost using filamentous fungi. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Satar, Mohammad Azrul Hisham (2013) Synthesis of nanosized copper oxide supported HY zeolite catalyst for photocatalytic decolorization of malachite green. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Setiabudi, Herma Dina (2013) Synthesis and characterization of iridium/platinum-hzsm5 catalyst for isomerization of n-pentane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sharifzadeh, Ghorbanali (2013) Synthesisise and characterization of polyacrylamide/ sodiumcarboxymethyl cellulose/ montmorillonite nanocomposite hydrogel vaginal ring for drug delivery systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sharifzadeh, Ghorbanali (2013) Synthesis and characterization of polyacrylamide/sodium carboxymethyl cellulose/montmorillonite nanocomposite hydrogel vaginal ring for drug delivery systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Soltani, Mohammad (2013) Electrochemical impedance spectroscopic analysis of binding interactions between haptens and poly L- Arginine and poly L-Lysine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Spalie, Nurul Syuhada (2013) Conversion of glycerol to methanol over copper and nickel supported on HZSM-5 zeolite by hydrothermal process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Xiao Ping (2013) A study of properties of low density polyethylene / palm pressed fibre biocomposite film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Tan, Xiao Ping (2013) A study of properties of low density polyethylene/ palm pressed fibre biocomposite film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tugiman, Nazuha (2013) Physical and thermal properties of polypropylene/rice straw biocomposite foam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Azaman, Wan Anis (2013) Production of ethyl levulinate from oil palm fronds using heteropoly acid as catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusuf, Rafiu Olasunkanmi (2013) Methane emission inventory and forecasting in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zabidi, Mohd. Saiful Affendi (2013) Mechanical and flammability properties of hybrid recycled newspaper/ montmorillonite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zabidi, Mohd. Saiful Affendi (2013) Mechanical and flammabillity properties of hybrid recycled newspaper/montmorillonite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.