Items where Division is "Mechanical Engineering" and Year is 2023

Article

Lee, Mei Bao and Lee, Chiew Tin and Chong, William Woei Fong and Mohd. Sanip, Suhaila (2023) A quick and facile solution -processed method for PEDOT:PSS transparent conductive thin film. IIUM Engineering Journal, 24 (1). pp. 170-182. ISSN 1511-788X

Fong, Collin and Chin, Desmond Daniel and Ahmad, Hilton (2023) Static shear strength of single-lap joint using eggshell-toughened epoxy as adhesive agent. International Journal of Integrated Engineering, 15 (2). pp. 104-112. ISSN 2229-838X

Mat, Mohamad Nur Hidayat and Azman, Muhammad Faizal and M. Yusup,, Eliza (2023) Effect of airborne pathogen transmission released by an assailant in a mosque using CFD simulation. International Journal of Integrated Engineering, 15 (4). pp. 134-145. ISSN 2229-838X

Abubakar, Muazu and Ahmad, Norhayati (2023) Preparation and characterization of a clay-based ceramic membrane for tannery wastewater treatment. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 1-14. ISSN 2462-1943

Kim, Jeyoung and Chiong, Meng Soon and Rajoo, Srithar (2023) Effect of turbine upstream geometry on pulsating flow and turbocharged si-engine performance. International Journal Of Automotive Technology, 24 (2). pp. 527-539. ISSN 1229-9138

Syamsir, Agusril and Ean, Lee Woen and Muhammad Rizal, Muhammad Asyraf and Mohd. Supian, Abu Bakar and Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun (2023) Recent advances of GFRP composite cross arms in energy transmission tower: a short review on design improvements and mechanical properties. Materials, 16 (7). pp. 1-21. ISSN 1996-1944

Abd. Halim, Zulhelmi Alif and Mat Yajid, M. A. and Mat Yajid, xAhmed. G. and Saud, S. N. and Abu Bakar, T. A. (2023) The effect of CNTs/PEEK coating thickness on the friction and wear behavior of porous Ti-30Ta alloys for biomaterial implants. Journal of Applied Polymer Science, 140 (41). NA-NA. ISSN 0021-8995

Idris, Rubia and Chong, William Woei Fong and Mong, Guo Ren and Ali, Atikah and Adnan, Farrah Anis Fazliatul and Chong, Harry Lye Hin and Chong, Cheng Tung (2023) Microwave susceptor positional configuration for palm empty fruit bunch and waste tire co-pyrolytic oil yield and selectivity of value-added chemicals. Journal of Analytical and Applied Pyrolysis, 174 (106129). NA-NA. ISSN 0165-2370

Sadiq, Taoheed Olohunde and Sudin, Izman and Sudin, xAhmed and Idris, Jamaliah and Fadil, Nor Akmal (2023) Effect of homogenization heat treatment on the microstructure of AZ91 magnesium alloy at different temperatures and ageing times. Journal of Engineering Research (Kuwait), 11 (3). pp. 212-218. ISSN 2307-1877

Abd. Halim, Zulhelmi Alif and Ahmad, Norhayati (2023) Characterisation of thin α-Al2O3 tribo-coating deposited by low-power gas tunnel plasma spray. Materials Science and Technology, 39 (18). pp. 3345-3350. ISSN 0267-0836

Abd. Halim, Zulhelmi Alif and Mat Yajid, Muhammad Azizi and Ahmad, Norhayati (2023) Thermogravimetric behavior of mesoporous hydrated silica-alumina trihydrate hybrid powder synthesized by sol-gel/doping method. Materials Letters, 347 (NA). NA. ISSN 0167-577X

Abd. Latif, Amir and Ishak, Mohammad Ridzwan and Yidris, Noorfaizal and Mohamed Yusoff, Mohd. Zuhri and Muhammad Rizal, Muhammad Asyraf and Syed Zakaria, Sharifah Zarina (2023) Influence of woven glass-fibre prepreg orientation on the flexural properties of a sustainable composite honeycomb sandwich panel for structural applications. Materials, 16 (14). pp. 1-17. ISSN 1996-1944

Abdelmaksoud, Sherif I. and Mailah, Musa and Hing, Tang Howe (2023) System enhancement on perturbations and wind gusts for twin-rotor helicopter using intelligent active force control. International Journal of Modelling, Identification and Control, 43 (2). pp. 166-176. ISSN 1746-6172

Abdul Hanan, Umar and Abu Hassan, Shukur and Wahit, Mat Uzir and Binoj, Joseph Selvi and Mansingh, Bright Brailson and Goh, Kheng Lim (2023) Experimentation, optimization, and predictive analysis of compressive behavior of montmorillonite nano-clay/unsaturated polyester composites. Polymer Composites, 44 (1). pp. 241-251. ISSN 0272-8397

Abdul Manaf, M. Z. and K., Hudha and Samin, P. M. and Bakar, S .A. A. (2023) Modelling and verification of a 12-DOF tractor-semitrailer longitudinal model for load transfer analysis. International Journal of Heavy Vehicle Systems, 30 (5). pp. 525-559. ISSN 1744-232X

Abdulmunem, Abdulmunem R. and Hamed, Hussein M. and Mohd. Samin, Pakharuddin and Mazali, Izhari Izmi and Sopian, Kamaruzzaman (2023) Thermal management of lithium-ion batteries using palm fatty acid distillate as a sustainable bio-phase change material. Journal of Energy Storage, 73 (109187). NA-NA. ISSN 2352-152X

Abu Bakar, Mohd. Supian and Syamsir, Agusril and Alhayek, Abdulrahman and Muhammad Rizal, Muhammad Asyraf and Itam, Zarina and Shaik Ahmad Fadzil, Shaikh Muhd. Mubin and Abd. Aziz, Nurhanani and Jamal, Tarique and Mohd. Mansor, Siti Aminah (2023) The reduction factor of pultrude glass fibre-reinforced polyester composite cross-arm: a comparative study on mathematical modelling for life-span prediction. Materials, 16 (15). ISSN 1996-1944

Abu Bakar, Noor Zafirah and Padzillah, Muhamad Hasbullah (2023) Influence of blade-flow interactions on flow behaviours and blade loading of an automotive mixed-flow turbine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (1). pp. 131-153. ISSN 2289-7879

Abu Baker, Esam Abu Baker Ali and Ishak, Iskandar Shah and Mat Lazim, Tholudin and Mohamed Takeyeldein, Mohamed and Abu Haider, Abul Bashar Mohammad (2023) Aerodynamic performance investigation of a small horizontal axis wind turbine with multi-airfoil blade profiles of SD2030 and E231 using wind tunnel experiments and BEM theory method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (1). pp. 150-164. ISSN 2289-7879

Adnan, Ahmad Naufal and Ma’aram, Azanizawati and Md. Sirat, Rozlina and Mohd. Taib, Mohd. Firdaus and Ismail, Azianti and Libasin, Zalina (2023) Preliminary framework of lean healthcare sustainability performance measurement for health sector. Malaysian Journal of Medicine and Health Sciences, 19 (5). pp. 145-151. ISSN 1675-8544

Agustiarini, Nurlaily and Hoang, Hieu Ngoc and Oh, Jong Taek and Mohd. Ghazali, Normah (2023) Application of machine learning to the prediction of the boiling heat transfer coefficient of R32 inside a multiport mini-channel tube. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3137-3153. ISSN 1388-6150

Ahamed, Menaz and Pesyridis, Apostolos and Saray, Jabraeil Ahbabi and Andwari, Amin Mahmoudzadeh and Gharehghani, Ayat and Rajoo, Srithar (2023) Comparative assessment of sCO2 cycles, optimal ORC, and thermoelectric generators for exhaust waste heat recovery applications from heavy-duty diesel engines. Energies, 16 (11). pp. 1-21. ISSN 1996-1073

Ahmed Shakil, Usaid and Abu Hassan, Shukur and Yahya, Mohd. Yazid (2023) Electrospun short nanofibers to improve damage resistance of carbon fiber composites. Polymer Composites, 44 (4). pp. 2305-2321. ISSN 0272-8397

Akbar Teguh Prakoso, Akbar Teguh Prakoso and Basri, Hasan and Dendy Adanta, Dendy Adanta and Irsyadi Yani, Irsyadi Yani and Ammarullah, Muhammad Imam and Akbar, Imam and Ghazali, Farah Amira and Syahrom, Ardiyansyah and Tunku Kamarul, Tunku Kamarul (2023) The effect of tortuosity on permeability of porous scaffold. Biomedicines, 11 (2). pp. 1-17. ISSN 2227-9059

Al-Allaj, Ali Jaber Naeemah and Wong, Kuan Yew (2023) Sustainability metrics and a hybrid decision-making model for selecting lean manufacturing tools. Resources, Environment and Sustainability, 13 (NA). pp. 1-24. ISSN 2666-9161

Alamin, Etaib and Kamaruzaman, Natrah and Mohamed Kamar, Haslinda (2023) A pragmatic retrofitting approach to enhancing the thermal, energy and economic performance of an educational building: a case study in Malaysia. Clean Energy, 7 (6). pp. 1282-1299. ISSN 2515-4230

Alawi, Omer A. and Mohamed Kamar, Haslinda and Falah, Mayadah W. and Hussein, Omar A. and Abdelrazek, Ali H. and Ahmed, Waqar and Mahmoud Eltaweel, Mahmoud Eltaweel and Homod, Raad Z. and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2023) Thermohydraulic performance of thermal system integrated with twisted turbulator inserts using ternary hybrid nanofluids. Nanotechnology Reviews, 12 (1). pp. 1-21. ISSN 2191-9089

Alfellag, Mohanad A. and Mohamed Kamar, Haslinda and Che Sidik, Nor Azwadi and Muhsan, Ali Samer and Kazi, Salim Newaz and Alawi, Omer A. and Abidin, Ummikalsom (2023) Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 6645-6686. ISSN 1388-6150

Ali, Syed Mithun and Fathollahi-Fard, Amir M. and Ahnaf, Rashik and Wong, Kuan Yew (2023) A multi-objective closed-loop supply chain under uncertainty: An efficient Lagrangian relaxation reformulation using a neighborhood-based algorithm. Journal of Cleaner Production, 423 (138702). NA-NA. ISSN 0959-6526

Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2023) Comparison of thermal comfort condition of naturally ventilated courtyard, semi-outdoor and indoor air-conditioned spaces in tropical climate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 45-58. ISSN 2289-7879

Allah, Mohammad Zaraa and Mohamed Kamar, Haslinda and Hariri, Azian and Wong, Keng Yinn (2023) Investigating adaptive thermal comfort in office settings: A case study in Johor Bahru, Malaysia. Case Studies in Chemical and Environmental Engineering, 8 (NA). pp. 1-12. ISSN 2666-0164

Alsebai, Fouzi and Kang, Hooi-Siang and Yaakob, Omar and Muhammad Yazid, Muhammad Noor Afiq Witri (2023) Review of resources from the perspective of wave, tidal, and ocean thermal energy conversion. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (3). pp. 127-149. ISSN 2462-1943

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Mohd. Saufi, Mohd. Syahril Ramadhan and Ma'aram, Azanizawati and Masood, Ibrahim (2023) An improved features selection approach for control chart patterns recognition. Indonesian Journal of Electrical Engineering and Computer Science, 31 (2). pp. 734-746. ISSN 2502-4752

Alwan, Waseem and Ngadiman, Nor Hasrul Akhmal and Hassan, Adnan and Saufi, Syahril Ramadhan and Mahmood, Salwa (2023) Ensemble classifier for recognition of small variation in X-Bar control chart patterns. Machines, 11 (1). pp. 1-32. ISSN 2075-1702

Aramwit, Pornanong and Chin, Desmond Daniel Vui Sheng and Moorthy, Goutam Krishna and Guna, Vijaykumar and Reddy, Narendra (2023) Rice husk and coir fibers as sustainable and green reinforcements for high performance gypsum composites. Construction and Building Materials, 393 (NA). NA-NA. ISSN 0950-0618

Arshad, Azrina and Mat Yajid, Muhamad Azizi and Daroonparvar, Mohammadreza and Idris, Mohd. Hasbullah and Mohd. Zulkifli, Intan Syaqirah and Hassan, Ahmed G. and Abdul Halim, Zulhelmi Alif (2023) Effect of laser-glazed treatment on thermal cyclic behavior of plasma-sprayed Lanthanum Zirconate/Yttria-stabilized Zirconia double ceramic layered on NiCoCrAlYTa-coated Inconel. Journal of Thermal Spray Technology, 32 (8). pp. 2603-2619. ISSN 1059-9630

Asyraf, M. R. M. and Nurazzi, N. M. and Norrrahim, M. N. F. and Hazrati, K. Z. and Ghani, Aizat and Sabaruddin, F. A. and Lee, S. H. and Shazleen, S. S. and Razman, M. R. (2023) Thermal properties of oil palm lignocellulosic fibre reinforced polymer composites: A comprehensive review on thermogravimetry analysis. Cellulose, 30 (5). pp. 2753-2790. ISSN 0969-0239

Audu, Ibrahim Ali and Abdul Hamid, Mohd. Kameil and Abas, Mohd. Azman and Opia, Anthony Chukwunonso (2023) Tribological behavior investigation of Ficus Carica oil blended ethylene-vinyl acetate polymer on AISI 52100 steel using four-ball tribometer. Jurnal Tribologi, 38 (NA). pp. 29-39. ISSN 2289-7232

Azman, Nurul Farhanah and Samion, Syahrullail and Mohamad Nor Musa, Mohamad Nor Musa (2023) The role of oleic acid on the structural changes of graphite nanoplatelets in enhancing the tribological performance of a palm oil-based lubricant. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1353-1371. ISSN 1350-6501

Azmi, A. and Padzillah, Mohammad Hasbullah (2023) Secondary flow structure characteristics of an automotive mixed flow turbocharger turbine volute at different aspect ratios. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3089-3115. ISSN 1388-6150

Balogun, S. A. and Abdul Jalil, M. K. and Mohd. Taib, J. (2023) An approach to logical compatibility determination for solution principles in morphological matrix-based conceptual design. International Journal Of Automotive And Mechanical Engineering, 20 (1). pp. 10211-10230. ISSN 2229-8649

Basri, Hasan and Akbar Teguh Prakoso, Akbar Teguh Prakoso and Abidin, Zainal and Syahrom, Ardiansyah and Akbar, Imam and Dendy Adanta, Dendy Adanta (2023) The effect of tortuosity on wall shear stress of porous scaffold. CFD Letters, 15 (7). pp. 61-73. ISSN 2180-1363

Busu, Nur’Amirah and Mat Isa, Norasikin and Hariri, Azian and Hussein, Mohamed (2023) The comparison of P, PI and PID strategy performance as temperature controller in active iris damper for centralized air conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 143-154. ISSN 2289-7879

Chow, Zhen Pei and Ahmad, Zaini and Wong, King Jye (2023) Temperature effects on the low-velocity impact of FML panels: experimental and numerical analyses. International Journal of Impact Engineering, 172 (104403). NA-NA. ISSN 0734-743X

Devi Rianti, Devi Rianti and Alqomariyah Eka Purnamasari, Alqomariyah Eka Purnamasari and Rifayinqa Ruyani Putri, Rifayinqa Ruyani Putri and Noor Zain Salsabilla, Noor Zain Salsabilla and Faradillah, Faradillah and Elly Munadziroh, Elly Munadziroh and Titien Hary Agustantina, Titien Hary Agustantina and Asti Meizarini, Asti Meizarini and Anita Yuliati, Anita Yuliati and Syahrom, Ardiyansyah (2023) The compressive strength and static biodegradation rate of chitosan-gelatin limestone-based carbonate hydroxyapatite composite scaffold. Dental Journal, 56 (3). pp. 160-165. ISSN 1978-3728

Djabir, Djabir Abdoulaye and Mat, Mohamad Nur Hidayat and Hariri, Azian (2023) CFD investigation on thermal comfort in open spaces library in tropical climate. CFD Letters, 15 (9). pp. 83-101. ISSN 2180-1363

Dzulkifli, Mohd. Haziq and A. Majid, Rohah and Yahya, Mohd. Yazid (2023) Influence of sodium-montmorillonite nanoclay on flammability, thermal stability, morphology, and mechanical properties of rigid water-blown palm oil-based polyurethane foam. Cellular Polymers, 42 (3-4). pp. 140-155. ISSN 0262-4893

Elfarouk, Omar and Wong, Kuan Yew and Ahmad, Shamraiz (2023) Stochastic closed-loop supply chain models: literature review, recent developments, and future research directions. International Journal of Operational Research, 47 (3). pp. 357-383. ISSN 1745-7645

Elhawary, Shehab and Saat, Aminuddin and Abdul Wahid, Mazlan and Md. Zain, Mohd. Zarhamdy (2023) Effect of nitrous oxide on laminar burning velocity, hydrodynamic, and diffusive–thermal instability of biogas combustion. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3073-3088. ISSN 1388-6150

Fadara, Taiwo Gbolarumi and Wong, Kuan Yew and Mohd. Maulana, Muhd. Ikmal Isyraf (2023) Sustainability assessment of textile and apparel sector: a review of current approaches and tools. Nigerian Journal of Technological Development, 20 (3). pp. 1-20. ISSN 0189-9546

Faridmehr, Iman and Nehdi, Moncef L. and Nejad, Ali Farokhi and Valerievich, Kiyanets Aleksandr (2023) Performance of partially grouted reinforced masonry walls with bed-joint reinforcement: parametric and optimization investigation. Archives of Civil and Mechanical Engineering, 24 (2). NA-NA. ISSN 1644-9665

Fathollahi-Fard, Amir M. and Tian, Guangdong and Ke, Hua and Fu, Yaping and Wong, Kuan Yew (2023) Efficient multi-objective metaheuristic algorithm for sustainable harvest planning problem. Computers and Operations Research, 158 (NA). NA-NA. ISSN 0305-0548

Foong, Shin Ying and Chan, Yi Herng and Lock, Serene Sow Mun and Chin, Bridgid Lai Fui and Yiin, Chung Loong and Cheah, Kin Wai and Loy, Adrian Chun Minh and Yek, Peter Nai Yuh and Chong, William Woei Fong and Lam, Su Shiung (2023) Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects. Bioresource Technology, 369 (NA). NA-NA. ISSN 0960-8524

Gu, Jie and Chong, Cheng Tung and Mong, Guo Ren and Ng, Jo-Han and Chong, WilliamWoei Fong (2023) Determination of pyrolysis and kinetics characteristics of chicken manure using thermogravimetric analysis coupled with particle swarm optimization. Energies, 16 (4). pp. 1-22. ISSN 1996-1073

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2023) Flow characterization of low sweep MULDICON wing at low speed. Aircraft Engineering and Aerospace Technology, 95 (7). pp. 1081-1091. ISSN 1748-8842

Hamzah, N. and Mohd. Yasin, M. F. and Zainal, M. T. and Mohd. Sies, M. and Mohd. Yusop, M. Z. and Chong, C. T. and Mohd. Subha, N. A. and Rosmi, M. S. (2023) Morphology and growth region analysis of carbon nanotubes growth in water-assisted flame synthesis. Combustion Science and Technology, 195 (4). pp. 860-877. ISSN 0010-2202

Hashmi, Mudassar Hussain and Abdul Hamid, Mohd. Fauzi and Tamin, Mohd. Nasir (2023) A robust probabilistic fatigue crack growth model based on walker's crack growth rate equation for metallic materials. Probabilistic Engineering Mechanics, 72 (NA). NA. ISSN 0266-8920

Hassan, M. H. and Jamali, A. and R., Lidyana and Suffian, M. S. Z. M. and Hadi, M. S. and Mat Darus, I. Z. (2023) Grey wolf optimization for intelligent parametric modeling of gradient flexible plate structure. Journal of Applied Science and Engineering (Taiwan), 26 (9). pp. 1207-1214. ISSN 2708-9967

Hatif, Ihab Hasan and Mohamed Kamar, Haslinda and Kamsah, Nazri and Wong, Keng Yinn (2023) Comparative evaluation of air distribution systems for controlling the airborne infection risk in indoor environments. Journal of Building Engineering, 79 (107913). NA-NA. ISSN 2352-7102

Hatif, Ihab Hasan and Mohamed Kamar, Haslinda and Kamsah, Nazri and Wong, Keng Yinn and Tan, Huiyi (2023) Influence of office furniture on exposure risk to respiratory infection under mixing and displacement air distribution systems. Building and Environment, 239 (NA). NA-NA. ISSN 0360-1323

Hu, Xinyu and Fang, Yizhou and Wu, Yanan and Wu, He and Kang, Hooi Siang (2023) An approach to assess the potential of wave energy resources based on directional energy flux. Ocean Engineering, 287 (NA). NA. ISSN 0029-8018

Ibrahim, Muhammad Hilmi and Hamzah, Norikhwan and Mohd. Yusop, Mohd. Zamri and Ni Luh Wulan Septiani, Ni Luh Wulan Septiani and Mohd. Yasin, Mohd. Fairus (2023) Control of morphology and crystallinity of CNTs in flame synthesis with one-dimensional reaction zone. Beilstein Journal of NanotechnologyVolume , Pages -, 14 (NA). pp. 741-750. ISSN 2190-4286

Ismail, Najib Aminu and Abdul Wahid, Mazlan and Sa’at, Aminuddin and Shitu, Abubakar and Abdulrahman, Mohammed Bashir (2023) Effect of recirculation ratio on the combustion characteristics of an asymmetric swirling flameless combustor using biogas. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (1). pp. 52-65. ISSN 2289-7879

Jalal, Mohd. Rajali and Abd. Kader, Ab. Saman and Abdul Hamid, Mohd. Foad and Kang, Hooi Siang (2023) A stochastic petri net-based approach for operational performance estimation of quay cranes. Quality and Reliability Engineering International, 39 (5). pp. 1660-1680. ISSN 0748-8017

Jama’a, Mohd. Jazmi Asyraff and Gurunathan, Balamurugan Annamalai and Botas, Ricardo Martinez and Khairuddin, Uswah (2023) Comparison of secondary flow characteristics in mixed-flow turbine between nozzleless and symmetric nozzle vane angles under steady-state flow at full admission. Energies, 16 (10). pp. 1-29. ISSN 1996-1073

Jin, Xin and Liang, Yunyi and Wang, Jin and Wang, Qin and Wu, Yingji and Chong, William W. F. and Christian Sonne, Christian Sonne and Lam, Su Shiung and Xia, Changlei (2023) Hierarchical self-assembly of polyphenolic functionalized magnetic superstructure for enhanced removal of organic dyes. Chemical Engineering Journal, 457 (NA). NA-NA. ISSN 1385-8947

Kamaruddin, Zatil Hafila and Jumaidin, Ridhwan and Kamaruddin, Zatil Hazrati and Muhammad Rizal, Muhammad Asyraf and Razman, Muhammad Rizal and Khan, Tabrej (2023) Effect of Cymbopogan citratus fibre on physical and impact properties of thermoplastic cassava starch/palm wax composites. Polymers, 15 (10). pp. 1-14. ISSN 2073-4360

Khan, Safdar Ali and Koloor, Seyed Saeid Rahimian and Wong, King Jye and Siebert, Geralt and Tamin, Mohd. Nasir (2023) A fatigue model to predict interlaminar damage of FRP composite laminates subjected to mode I load. Polymers, 15 (3). pp. 1-17. ISSN 2073-4360

Khan, Safdar Ali and Koloor, Seyed Saeid Rahimian and Wong, King Jye and Yidris, Noorfaizal and Mohd. Yusof, Ab. Aziz and Mohd. Szali Januddi, Mohd. Al Fatihhi and Tamin, Mohd. Nasir and Johar, Mahzan (2023) Strain rate effect on mode I debonding characterization of adhesively bonded aluminum joints. Processes, 11 (1). pp. 1-14. ISSN 2227-9717

Kharboot, Layla Haythoor and Fadil, Nor Akmal and Abu Bakar, Tuty Asma and Mohd. Najib, Abdillah Sani and Nordin, Norhuda Hidayah and Ghazali, Habibah (2023) A review of transition metal sulfides as counter electrodes for dye-sensitized and quantum dot-sensitized solar cells. Materials, 16 (7). pp. 1-27. ISSN 1996-1944

Khoo, Pui San and Rushdan, Ahmad Ilyas and Uda, Muhammad Nur Aiman and Abu Hassan, Shukur and Nordin, Abu Hassan and Abdul Samad, Norfarhana and Ab. Hamid, Nur Hafizah and Rani, Mohd. Saiful Asmal and Hairul Abral, Hairul Abral and Norrrahim, Mohd. Nor Faiz and Knight, Victor Feizal and Lee, Chuan Li and Shafi, Ayu Rafiqah (2023) Starch-based polymer materials as advanced adsorbents for sustainable water treatment: current status, challenges, and future perspectives. Polymers, 15 (14). pp. 1-31. ISSN 2073-4360

Khor, Wei Han and Goh, Jie Heng and Yew, Qi Ming and Kang, Hooi-Siang and Lim, Jun-Wei and Iwamoto, Koji and Tang, Collin Howe-Hing and Lee, Kee-Quen and Wu, Yun-Ta and Goh, Pei Sean (2023) Residence time distribution of an offshore floating photobioreactor under hydrodynamic sloshing effect. Chemical Engineering Research and Design, 198 (NA). pp. 340-348. ISSN 0263-8762

Khor, Wei Han and Goh, Jie Heng and Yew, Qi Ming and Kang, Hooi-Siang and Lim, Jun-Wei and Koji, Iwamoto and Tang, Collin Howe-Hing and Goh, Pei Sean (2023) Residence time distribution of an irregular octagonal tank under hydrodynamic sloshing effect. Chemical Engineering Transactions, 106 (NA). pp. 1303-1308. ISSN 2283-9216

Kumar, Mithun and Isloor, Arun M. and Nayak, M. C. S. and Todeti, Somasekhara Rao and Padaki, Mahesh and Ismail, Ahmad Fauzi (2023) Hydrophilic polydopamine/polyvinylpyrrolidone blended polyphenylsulfone hollow fiber membranes for the removal of arsenic-V from water. Journal of Environmental Chemical Engineering, 11 (5). NA-NA. ISSN 2213-3437

Latif, Kamran and Rodriguez, Efrain and Bonnard, Renan and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2023) Expert system to implement STEP-NC data interface model on CNC machine. International Journal Of Advanced Manufacturing Technology, 129 (11-12). pp. 5371-5385. ISSN 0268-3768

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2023) New method to utilize STEP-NC data interface model for 3D printing. Progress in Additive Manufacturing, 8 (6). pp. 1677-1686. ISSN 2363-9512

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra and Bonnard, Renan and Rodriguez, Efrain and Pacheco, Nazareno de Oliveira (2023) New system architecture and algorithm design for indirect STEP-NC implementation. International Journal on Interactive Design and Manufacturing, 17 (4). pp. 1895-1903. ISSN 1955-2513

Le, Huyen Thi and Punurai, Wonsiri and Wan Zawawi, Noor Amila and Yaakob, Omar and Nguyen, Nhung Thi Phuong and Le, Thanh Thanh and Van Nguyen, Kiet and Sari Amelia, Sari Amelia and Kamarudin, Nurul Anis and Kang, Hooi-Siang and Van Le, Sy (2023) A review of mercury waste management in the ASEAN oil and gas industry. Journal of Hazardous, Toxic, and Radioactive Waste, 27 (1). NA-NA. ISSN 2153-5493

Leong, Wai Hong and Lim, Jun Wei and Rawindran, Hemamalini and Liew, Chin Seng and Lam, Man Kee and Ho, Yeek Chia and Khoo, Kuan Shiong and Katsuki, Kusakabe and Abdelghani, Heba Taha M. and Ho, Chii-Dong and Ng, Hui-Suan and Usman, Anwar and Kang, Hooi-Siang (2023) Energy balance and life cycle assessments in producing microalgae biodiesel via a continuous microalgal-bacterial photobioreactor loaded with wastewater. Chemosphere, 341 (NA). NA-NA. ISSN 0045-6535

Leow, Jing Shuo and Leow, Jing Shun and Kang, Hooi Siang and Yaakob, Omar and Punurai, Wonsiri and Sari Amelia, Sari Amelia and Le, Huyen Thi (2023) Technical preparedness in Southeast Asia region for onshore dismantling of offshore structures: gaps and opportunities. Ocean Systems Engineering, 13 (1). pp. 79-95. ISSN 2093-6702

Li, Bo Yu and Tee, Meng Yang and Nge, Kie Seng and Ng, Andrew Kay Lup and Chong, William Woei Fong and Ng, Jo-Han and Mong, Guo Ren (2023) Comparison kinetic analysis between Coats-Redfern and Criado’s master plot on pyrolysis of horse manure. Chemical Engineering Transactions, 106 (NA). pp. 1273-1278. ISSN 2283-9216

Ling, Min and Mehrez, Sadok and Vignesh, R. Vaira and Mohd. Zain, Azlan and Paidar, Moslem and Kharche, Nitin A. and Mohanavel, V. (2023) Investigation on underwater friction stir processing of AZ-61 magnesium alloy. Materials Today Communications, 36 (NA). NA. ISSN 2352-4928

Ma, Gang and Jin, Conglin and Wang, Hong Wei and Li, Peng and Kang, Hooi Siang (2023) Study on dynamic tension estimation for the underwater soft yoke mooring system with LSTM-AM neural network. Ocean Engineering, 267 (NA). NA. ISSN 0029-8018

Ma, Quanjin and Rejab, M. R. M. and Abu Hassan, Shukur and Azeem, Mohammad and Saffirna, M. S. (2023) Failure behavior analysis of the spherical-roof contoured core (Srcc) under quasi-static loading: a numerical study. Journal of Failure Analysis and Prevention, 23 (2). pp. 511-519. ISSN 1547-7029

Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Muhammad Rizal, Muhammad Asyraf and Syamsir, Agusril and Mohd. Supian, Abu Bakar and Elizaveta, Bobrynina (2023) Experimental and analytical investigation of flexural behavior of carbon nanotube reinforced textile based composites. Materials, 16 (6). pp. 1-14. ISSN 1996-1944

Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Muhammad Rizal, Muhammad Asyraf and Syamsir, Agusril and Mohd. Supian, Abu Bakar and Mamaev, Nicolay (2023) Buckling analysis of CNT-reinforced polymer composite beam using experimental and analytical methods. Materials, 16 (2). pp. 1-17. ISSN 1996-1944

Manda, Muhamad Soffi and Mat Rejab, Mohd. Ruzaimi and Abu Hassan, Shukur and Wahit, Mat Uzir and Didik Nurhadiyanto, Didik Nurhadiyanto (2023) Experimental study on tin slag polymer concrete strengthening under compression with metallic material confinement. Polymers, 15 (4). pp. 1-19. ISSN 2073-4360

Mansor, Azura and Ariffin, Ainnur Farhana and Yusof, Norimah and Mohd., Suhaili and Ramalingam, Saravana and Md. Saad, Amir Putra and Baharin, Ruzalina and Ng, Wuey Min (2023) Effects of processing and gamma radiation on mechanical properties and organic composition of frozen, freeze-dried and demineralised human cortical bone allograft. Cell and Tissue Banking, 24 (1). pp. 25-35. ISSN 1389-9333

Mansor, Muhammad Sideq Abu and Ghazali, Ahmad Dairobi and Ardani, Mohd. Ibthisham and Ab. Talib, Mat Hussin and Che Daud, Zul-Hilmi and Asus, Zainab and Mat Saad, Mohd. Fikri Azri and Zainol, Zaimi and Yusof, Suhaimi and Zakee, Mohd. Zulfahmi (2023) Forced air cooling for battery module on series connected batteries: temperature variation due to non-uniform flow across channel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (1). pp. 226-236. ISSN 2289-7879

Manu, Manikandan Nair and Roy, K. E. Reby and Mubarak Ali, M. and Abu Hassan, Shukur and Ligori, M. Susan (2023) Experimental investigation on the influence of silanized graphene coatings on carbon fiber composites as toughening agents at low temperatures. Materials Letters, 335 (NA). NA. ISSN 0167-577X

Mat, Mohamad Nur Hidayat and Mohd. Ghazali, Normah and Shamsuddin, Hielfarith Suffri and Estelle, Patrice (2023) Thermofluid behaviour of boron nitride nanotube nanofluid in a microchannel under optimized conditions. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3035-3044. ISSN 1388-6150

Mat, Mohamad Nur Hidayat and Muhammad Fidaa, Muhammad Zulhilmi (2023) Impact of MXene nanoparticle on thermohydraulic performance in a microchannel heat sink: effect of nanoparticle size. Microfluidics and Nanofluidics, 27 (1). NA. ISSN 1613-4982

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Alkahari, Mohd. Rizal and Tan, Ken Land (2023) Accuracy evaluation of thin wall features fabricated by fused deposition modeling using reinforced composite materials. Progress in Additive Manufacturing, 8 (6). pp. 1357-1366. ISSN 2363-9512

Md. Yusop, Abdul Hakim and Sarian, Murni Nazira and Januddi, Fatihhi Szali and Nur, Hadi (2023) Drug-device systems based on biodegradable metals for bone applications: Potential, development and challenges. Biocybernetics and Biomedical Engineering, 43 (1). pp. 42-57. ISSN 0208-5216

Mohaini, Muhammad Afendi and Mohd. Nor, Nur Safwati and Mohamad, Maziah and Ghazali, Nurzal Effiyana and Saputra, Hendri Maja (2023) IoT-based instrumented bicycle handlebar for children with autism spectrum disorder. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 12-27. ISSN 2289-7895

Mohammad Ghazali, Danial and Mohd. Nor, Nur Safwati and Mohaini, Muhammad Afendi and Saputra, Hendri Maja (2023) Smart IoT based monitoring system for fish breeding. Journal of Advanced Research in Applied Mechanics, 104 (1). pp. 1-11. ISSN 2289-7895

Mohammad Rafix, Nur Alyani Nazirah and Fadil, Nor Akmal and Amrin, Astuty and Bahador, Abdollah and Wan Ali, Wan Fahmin Faiz and Salleh, Suhaimi (2023) The effects of annealing on microstructure and tensile properties of cold drawn steel wire. Malaysian Journal of Microscopy, 19 (1). pp. 226-237. ISSN 1823-7010

Mohammadi, Hossein and Ahmad, Zaini and Mazlan, Saiful Amri and Faizal Johari, Mohd. Aidy and Siebert, Geralt and Michal Petru, Michal Petru and Koloor, Seyed Saeid Rahimian (2023) Lightweight glass fiber-reinforced polymer composite for automotive bumper applications: a review. Polymers, 15 (1). pp. 1-30. ISSN 2073-4360

Mohammed, Abdullahi Tanko and Muhamad Said, Mohd. Farid and Othman, Norazila and Opia, Anthony Chukwunonso and Veza, Ibham (2023) Feasibility study of biofuel incorporated nanoparticles as sustainable ic engine fuel: Opportunities and challenges - an overview. Automotive Experiences, 6 (1). pp. 94-121. ISSN 2615-6202

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Omran, Abdoulhdi A. Borhana and Elfaghi, Abdulhafid M. and Khattak, M. A. and Rushdan, Ahmad Ilyas and Salit, Mohd. Sapuan (2023) Effect of various plasticizers in different concentrations on physical, thermal, mechanical, and structural properties of wheat starch-based films. Polymers, 15 (1). pp. 1-20. ISSN 2073-4360

Mohd. Yatim, Hanim and Mohd. Ghazali, Normah and Mohamad, Maziah and Pamitran, Agus Sunjarianto and Novianto, Sentot (2023) Two-phase heat transfer microchannel system identification with particle swarm optimization (PSO) approach. International Journal Of Air-Conditioning And Refrigeration, 31 (1). pp. 1-12. ISSN 2010-1325

Mohd. Yusof, Ab. Aziz and Isa, Kamariah and Mohd. Szali,, Mohd. Al Fatihhi and Johar, Mahzan and Mahmud, Jamaluddin and Harun, Muhamad Noor (2023) Fracture characteristics of PLA synthetic bone scaffolds with different specimen porosities. Journal of Engineering Science and Technology, 18 (5). pp. 2493-2506. ISSN 1823-4690

Muhammad Rizal, Muhammad Asyraf and Mazlan, Rafidah and Madenci, Emrah and Ozkilic, Yasin Onuralp and Aksoylu, Ceyhun and Razman, Muhammad Rizal and Ramli, Zuliskandar and Syed Zakaria, Sharifah Zarina and Khan, Tabrej (2023) Creep properties and analysis of cross arms' materials and structures in latticed transmission towers: current progress and future perspectives. Materials, 16 (4). pp. 1-31. ISSN 1996-1944

Muhammad Yuhendri, Yoga Farhans and Nik Mohd., Nik Ahmad Ridhwan and Mat, Shabudin and Mohd. Nasir, Mohd. Nazri and Othman, Norazila and Mohd. Rafie, Azmin Shakrine and Azami, Muhammad Hanafi (2023) Impact of cowl deflections on scramjet intake aerodynamics with shock-on-lip condition. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 461-468. ISSN 1990-7710

Mujiyono, Mujiyono and Didik Nurhadiyanto, Didik Nurhadiyanto and Mukhammad, Alaya Fadllu Hadi and Tri Widodo Besar Riyadi, Tri Widodo Besar Riyadi and Kristanto Wahyudi, Kristanto Wahyudi and Nur Kholis, Nur Kholis and Asri Peni Wulandari, Asri Peni Wulandari and Abu Hassan, Shukur (2023) Damage formations of ramie fiber composites multilayer armour system under high-velocity impacts. Eastern-European Journal of Enterprise Technologies, 1 (12(121). pp. 16-25. ISSN 1729-3774

Musa, Siti Musliha Aishah and Dzulkifli, Mohd. Haziq and Azmi, Asrul Izam and Ibrahim, Siti Azlida (2023) Embedded and surface-mounted fiber bragg grating as a multiparameter sensor in fiber-reinforced polymer composite materials: a review. IEEE Access, 11 . pp. 86611-86644. ISSN 2169-3536

Naeemah, Ali Jaber and Wong, Kuan Yew (2023) Selection methods of lean management tools: a review. International Journal of Productivity and Performance Management, 72 (4). pp. 1077-1110. ISSN 1741-0401

Nalcaci, Burak and Baysun, Meltem and Bahador, Abdollah and Umeda, Junko and Münstermann, Sebastian and Kaya, Ali Arslan and Erdogan, Mehmet (2023) Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel. Ironmaking and Steelmaking, 50 (9). pp. 1331-1339. ISSN 0301-9233

Ng, Lin Feng and Yahya, Mohd. Yazid and Leong, Hui Yi and Parameswaranpillai, Jyotishkumar and Muthukumar, Chandrasekar and Syed Hamzah, Syed Mohd. Saiful Azwan and Malingam, Sivakumar Dhar (2023) State-of-the-art review on developing lightweight fiber-metal laminates based on synthetic/natural fibers. Polymer Composites, 44 (10). pp. 6275-6303. ISSN 0272-8397

Ojaomo, Koleola Ebenezer and Samion, Syahrullail and Mohd. Yusop, Mohd. Zamri and Abidin, Ummikalsom and Paiman, Zulhanafi (2023) Effect of Tert-Butylhydroquinone on tribological performance of palm oil lubricant and aluminium plate using linear reciprocating tribometer. Jurnal Tribologi, 39 (NA). pp. 143-156. ISSN 2289-7232

Opia, Anthony Chukwunonso and Abdollah, Mohd. Fadzli and Johnson, Charles and Samion, Syahrullail and Mohd. Zawawi, Fazila (2023) Lubricity performance evaluation of organic polymer as additives invegetable oil understeel materials. Jordan Journal of Mechanical and Industrial Engineering, 17 (3). pp. 385-391. ISSN 1995-6665

Patel, Mohammed Shihab and Liew, Mohd. Shahir and Kang, Hooi Siang and Lee, Kee Quen and Kim, Moo Hyun and Bambole, Abhay (2023) Dynamic roll instability of liquid natural gas carrier during offloading operations and prediction of downtime cost in Malaysian waters. Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment, 27 (4). pp. 1027-1039. ISSN 1475-0902

Pujotomo, Darminto and Syed Hassan, Syed Ahmad Helmi and Ma'aram, Azanizawati and Sutopo, Wahyudi (2023) University–industry collaboration in the technology development and technology commercialization stage: a systematic literature review. Journal of Applied Research in Higher Education, 15 (5). pp. 1276-1306. ISSN 2050-7003

Rafiul Alam, Jubayer Abdullah and Abu Talib, Abd. Rahim and Mohammed Altarazi, Yazan Sofyan and Yusaf, Talal and Azami, Muhammad Hanafi and Nik Mohd., Nik Ahmad Ridhwan (2023) Experimental investigation on gas turbine engine performance using alternative fuel. Journal of Aeronautics, Astronautics and Aviation, 55 (3S). pp. 479-483. ISSN 1990-7710

Rahim, Muhammad Roslan and Trisasongko, Annisa Palupi and Ab. Wahid, Mastura and Mohd. Jaafar, Mohammad Nazri and Othman, Norazila and Said, Mazlan and Elham, Puad and Sari@Mohd Ali, Mahanim (2023) Utilization of synthesis gas generated from agricultural waste as clean sustainable fuel. ASEAN Engineering Journal, 13 (2). pp. 159-164. ISSN 2586-9159

Rahman, Mohammad Nurizat and Ujir, Mohd. Haffis and Abdul Wahid, Mazlan and Mohd. Yasin, Mohd. Fairus (2023) A single-step chemistry mechanism for biogas supersonic combustion velocity with nitrogen dilution. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3019-3033. ISSN 1388-6150

Sadiq, Taoheed Olohunde and Sudin, Izman and Alsakkaf, Ahmed and Idris, Jamaliah and Fadil, Nor Akmal (2023) Electrophoretic deposition of nanohydroxyapatite on homogenized magnesium-based alloy for biomedical applications. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 61 (NA). pp. 15-41. ISSN 2296-9837

Sadiq, Taoheed Olohunde and Sudin, Izman and Idris, Jamaliah and Fadil, Nor Akmal (2023) Synthesis techniques of bioceramic hydroxyapatite for biomedical. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 59 (NA). pp. 59-80. ISSN 2296-9837

Saif, Yazid and Yusof, Yusri and M. Rus, Anika Zafiah and Ghaleb, Atef M. and Mejjaouli, Sobhi and Al-Alimi, Sami and Didane, Djamal Hissein and Latif, Kamran and Abdul Kadir, Aini Zuhra and Alshalabi, Hamood and Sadeq, Safwan (2023) Implementing circularity measurements in industry 4.0-based manufacturing metrology using MQTT protocol and Open CV: A case study. PLoS ONE, 18 (10). pp. 1-25. ISSN 1932-6203

Sanada, Stanferd Jenta and Mat, Mohamad Nur Hidayat (2023) Effect of indoor condition with cross ventilation on deposition of airborne droplets emitted from human cough. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (1). pp. 184-202. ISSN 2289-7879

Saufi, Syahril Ramadhan and Isham, Muhammad Firdaus and Ahmad, Zair Asrar and Abu Hasan, M. Danial (2023) Machinery fault diagnosis based on a modified hybrid deep sparse autoencoder using a raw vibration time-series signal. Journal of Ambient Intelligence and Humanized Computing, 14 (4). pp. 3827-3838. ISSN 1868-5137

Selamat, Muhammad Syafiq Ridhwan and Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd Fairus and Hamzah, Norikhwan and Che Sidik, Nor Azwadi (2023) Modelling of the flame synthesis of single-walled carbon nanotubes in non-premixed flames with aerosol catalyst. Journal of Advanced Research in Numerical Heat Transfer, 13 (1). pp. 39-51. ISSN 2735-0142

Shaari, Aida Nur Syafiqah and Hadi, Muhamad Sukri and Abdul Wahab, Abdul Malek and Eek, Rickey Ting Pek and Mat Darus, Intan Zaurah (2023) Active vibration control of flexible beam system based on cuckoo search algorithm. International Journal of Electrical and Computer Engineering, 13 (2). pp. 2289-2298. ISSN 2088-8708

Shafyra, Sabri and Engku Abu Bakar, Engku Mohammad Nazim and Ngadiman, Nor Hasrul Akhmal and Sudin, Izman (2023) Comparative study on the microstructure and biodegradation behavior of commercialized pure Mg and Mg-1.0Ca-0.5Sr alloy in 27 mM HCO3−-SBF: the influence of the pH regulation treatments. Metals, 13 (1). pp. 1-21. ISSN 2075-4701

Shafyra, Sabri and Engku Mohammad Nazim, Engku Mohammad Nazim and Ngadiman, Nor Hasrul Akhmal and Sudin, Izman (2023) Comparative study on the microstructure and biodegradation behavior of commercialized pure Mg and Mg-1.0Ca-0.5Sr Alloy in 27 mM HCO3--SBF: The influence of the pH regulation treatments. Metals, 13 (1). pp. 1-21. ISSN 2075-4701

Sri Selvam, Dharsannen and Abdul Rahim, Norwazan and Saad, Mohd. Rashdan and Syawal, Syahar and Mohd. Faizal, Hasan and Abdul Rahman, Mohd. Rosdzimin (2023) Numerical simulation of a modified trapped vortex combustor. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3129-3135. ISSN 1388-6150

Sunarsih, Sunarsih and Jadmiko, Edi and Zaman, Muhammad Badrus and Abdul Malik, Adi Maimun and Ali, Arifah (2023) Enhancing a reliable ship performance evaluation in dynamic maneuvering conditions-a gap analysis. International Journal of Technology, 14 (3). pp. 561-575. ISSN 2086-9614

Suryani Dyah Astuti, Suryani Dyah Astuti and Yunus Susilo, Yunus Susilo and Ahmad Khalil Yaqubi, Ahmad Khalil Yaqubi and Tri Wahyuni, Tri Wahyuni and Miratul Khasanah, Miratul Khasanah and Syahrom, Ardiyansyah (2023) The effect of ozone exposure to extend the shelf life of carrots (Daucus Carrota L.) against vitamin C levels and hardness. Jurnal Teknologi, 85 (6). pp. 105-110. ISSN 0127-9696

Syed Hussain, Haja and Mohd. Jamir, Mohd. Ridzuan and Abdul Majid, Mohd. Shukry and Salit, Mohd. Sapuan and Ferriawan Yudhanto, Ferriawan Yudhanto and Aris Widyo Nugroho, Aris Widyo Nugroho and Rani, Muhammad Faiz Hilmi (2023) Friction and wear characteristics of Furcraea foetida fiber-reinforced epoxy composites. Polymer Composites, 44 (12). pp. 8559-8577. ISSN 0272-8397

Taharuddin, Nurul Hanan and Jumaidin, Ridhwan and Mansor, Muhd. Ridzuan and Kamaruddin, Zatil Hazrati and Jamal, Tarique and Muhammad Rizal, Muhammad Asyraf and Razman, Muhammad Rizal (2023) Unlocking the potential of lignocellulosic biomass dragon fruit (Hylocereus polyrhizus) in bioplastics, biocomposites and various commercial applications. Polymers, 15 (12). pp. 1-17. ISSN 2073-4360

Takeyeldein, Mohamed M. and Ishak, I. S. and Lazim, Tholudin M. (2023) The effect of the number of the blades on diffuser augmented wind turbine performance. Journal of Engineering Science and Technology, 18 (2). pp. 1019-1037. ISSN 1823-4690

Tan, Huiyi and Lee, Chew Tin and Othman, Mohd. Hafiz Dzarfan and Zubir, Muhammad Afiq and Nyakuma, Bemgba Bevan and Chong, Wen Tong and Fan, Yee Van and Wong, Keng Yinn (2023) Evaluation of microbial contamination for pre- and post-surgical procedures in hospital operating rooms: A systematic onsite sampling. Chemical Engineering Transactions, 106 (NA). pp. 601-606. ISSN 2283-9216

Tan, Huiyi and Wong, Keng Yinn and Lee, Chew Tin and Wong, Syie Luing and Nyakuma, Bemgba Bevan and Abdul Wahab, Roswanira and Lee, Kee Quen and Chiong, Meng Choung and Ho, Wai Shin and Othman, Mohd. Hafiz Dzarfan and Yau, Yat Huang and Kek, Hong Yee and Mohamed Kamar, Haslinda (2023) Numerical assessment of ceiling-mounted air curtain on the particle distribution in surgical zone. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3005-3018. ISSN 1388-6150

Tan, Huiyi and Wong, Keng Yinn and Othman, Mohd. Hafiz Dzarfan and Kek, Hong Yee and Nyakuma, Bemgba Bevan and Ho, Wai Shin and Hashim, Haslenda and Abdul Wahab, Roswanira and Chin, Desmond Daniel Vui Sheng and Abdul Wahab, Nur Haliza and Yatim, Ardiyansyah Saad (2023) Why Do Ventilation Strategies Matter In Controlling Infectious Airborne particles? A comprehensive numerical analysis in isolation ward. Building and Environment, 231 (NA). NA-NA. ISSN 0360-1323

Ten, Ki Hong and Kang, Hooi Siang and Siow, Chee Loon and Goh, Pei Sean and Lee, Kee Quen and Huspi, Sharin Hazlin and Soares, Guedes (2023) Automatic identification system in accelerating decarbonization of maritime transportation: the state-of-the-art and opportunities. Ocean Engineering, 289 (NA). NA. ISSN 0029-8018

Wei, Zhongbin and Kulandaivel, Arul and Tino Hermanto, Tino Hermanto and Vignesh, R. Vaira and Mehrez, Sadok and Paidar, Moslem and Mohd. Zain, Azlan and Mohanavel, V. (2023) An investigation on mechanical and wear behavior of friction-stir-processed hybrid AZ80/CeO2 + BN surface composite. Materials Letters, 346 (NA). NA. ISSN 0167-577X

Wong, King Jye and Chong, William Woei Fong and Goh, Kheng Lim (2023) Fiber bridging mechanism in moisture-induced mode I delamination in carbon/epoxy composites: finite element analysis and experimental investigation. Polymer Composites, 44 (2). pp. 1392-1407. ISSN 0272-8397

Yahaya, Aiman and Samion, Syahrullail and Abdul Hamid, Mohd. Kameil (2023) Surface modification effect of aluminium block on the tribological performance for super olein. Industrial Lubrication and Tribology, 75 (9). pp. 993-1001. ISSN 0036-8792

Yahaya, Aiman and Samion, Syahrullail and Abidin, Ummikalsom and Abdul Hamid, Mohd. Kameil (2023) Different behaviors of friction in open and closed forging test utilizing palm oil-based lubricants. Lubricants, 11 (3). pp. 1-19. ISSN 2075-4442

Yahaya, Aiman and Samion, Syahrullail and Abidin, Ummikalsom and Nor Musa, Nor Musa and Hamid, Kameil (2023) Modelling the tribological performance of palm mid olein in cold forging test using deform-3D. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1372-1383. ISSN 1350-6501

Yasukawa, Hironori and Okuda, Ryusuke and Hasnan, Muhammed Amirul Asyraf and Nakayama, Yoshiyuki and Matsuda, Akihiko (2023) 6-DOF motion simulations of a deadship drifting in wind and waves. Ocean Engineering, 275 (NA). NA. ISSN 0029-8018

Yusof, Nur Liyana Nabihah and Shamsuddin, Hielfarith Suffri and Estelle, Patrice and Mohd. Ghazali, Normah (2023) Optimization of a boron nitride nanotubes nanofluid-cooled microchannel heat sink at different concentrations. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3117-3127. ISSN 1388-6150

Zainal, Muhammad Thalhah and Hamzah, Norikhwan and Abdul Wahid, Mazlan and Kamaruzaman, Natrah and Chong, Cheng Tung and Ani, Mohd. Hanafi and Amzin, Shokri and Das, Tarit and Mohd. Yasin, Mohd. Fairus (2023) Zero-dimensional model for the prediction of carbon nanotube (CNT) growth region in heterogeneous methane-flame environment. Carbon Letters, 33 (7). pp. 2199-2210. ISSN 1976-4251

Zainol, Ismail and Loon, Siow Chee and Zoolfakar, Md. Redzuan and Ahmad Fuad, Ahmad Faizal and Ismail, Nuraihan and Rosli, Khairunnisa (2023) Integrating ship recycling facility into existing shipyard: a study of Malaysian shipyard. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 217-227. ISSN 2462-1943

Zangina, Umar and Buyamin, Salinda and Mahmud, Mohd. Saiful Azimi and Zimit, Aminu Yahaya and Abidin, Mohamad Shukri Zainal (2023) Multi-objective pathfinding for autonomous robot in agriculture. International Journal of Industrial Engineering : Theory Applications and Practice, 30 (3). pp. 671-687. ISSN 1072-4761

Zhao, Jihua and Ma, Hongzhi and Wu, Wenyu and Bacar, Mohammed Ali and Wang, Qunhui and Gao, Ming and Wu, Chuanfu and Xia, Changlei and Qian, Dayi and Chong, William Woei Fong and Lam, Su Shiung (2023) Product spectrum analysis and microbial insights of medium-chain fatty acids production from waste biomass during liquor fermentation process: Effects of substrate concentrations and fermentation modes. Bioresource Technology, 368 (NA). NA-NA. ISSN 0960-8524

Zhao, Yixin and Cai, Baoping and Kang, Henry Hooi Siang and Liu, Yiliu (2023) Cascading failure analysis of multistate loading dependent systems with application in an overloading piping network. Reliability Engineering and System Safety, 231 (NA). pp. 1-12. ISSN 0951-8320

Zimit, Aminu Yahaya and Jibril, Mahmud M. and Azimi, M. S. and Abba, Sani Isah (2023) Hybrid predictive based control of precipitation in a water-scarce region: a focus on the application of intelligent learning for green irrigation in agriculture sector. Journal of the Saudi Society of Agricultural Sciences, 22 (8). pp. 524-534. ISSN 1658-077X

Thesis

Abdullah, Mohamad Taisir (2023) Light-emitting diode lighting parametric study of internally illuminated photobioreactor for good growth of nannochloropsis species cultivation. PhD thesis, Universiti Teknologi Malaysia.

Firouzi, Alireza (2023) Estimating change point in multivariate processes via simultaneous mean vector and covariance matrix. PhD thesis, Universiti Teknologi Malaysia.

Hashmi, Mudassar Hussain (2023) Fractal and probabilistic analysis on fatigue crack growth rate of metallic materials. PhD thesis, Universiti Teknologi Malaysia.

Hasnol, Muhammed Zakariya (2023) Friction stir welding with different tool profiles on structure and hardness of dissimilar aluminium alloy AA5083 and AA6061-T6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Kamarudin, Maslinda (2023) Damage-based fretting wear model for life prediction of steel wire ropes. PhD thesis, Universiti Teknologi Malaysia.

Khan, Safdar Ali (2023) Interlaminar fatigue damage model of carbon fiber-reinforced polymer composite laminates. PhD thesis, Universiti Teknologi Malaysia.

Setiawan, Yosua (2023) Simulation of performance and optimization for diesel engine fueled with higher biodiesel blend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.