Items where Division is "Mechanical Engineering" and Year is 1997

A

Abd. Ghani, Mohamad Pauzi and Mohd. Jaafar, Mohammad Nazri (Penterjemah) (1997) Elemen reka bentuk kapal. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0076–9

Abdul Latif, Ainullotfi (Penterjemah) (1997) Kaedah unsur terhingga : pengenalan asas untuk jurutera edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0063–7

Ahmad, Mohamad Noh (Penterjemah) and Mohd. Jaafar, Mohamad Nazri (Penterjemah) and Ramli, Yahaya (Penterjemah) and Stackpoole, Les and Morrison, Mal and Gregory, Alan (1997) Elektronik untuk mekanik motor (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0101–3

Ahmad, Mohd. Zamani (Penterjemah) (1997) Kestabilan kapal dagang. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0089–0

Al-Shayeb, Mohamed and Lie, T. T. and Abd. Ghani, Badri (1997) Sensitivity analysis of columns at extreme temperature. Jurnal Mekanikal, 1 (3). pp. 1-16. ISSN 0127-3396

B

Bahak, Mohd. Zubil (Penterjemah) (1997) Pengenalan tribologi (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0099–8

Bahak, Mohd. Zubil (Penterjemah) (1997) Teori kekenyalan edisi ketiga (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0102–1

C

Che Ismail, Che Abas (Penterjemah) and Abd. Ghani, Mohd. Pauzi (Penterjemah) and Abdullah, Mohd. Yunus (Penterjemah) (1997) Teori getaran dengan penggunaan edisi ketiga (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0092–0

Chong, Alex Wen Tong and Zainal, Haliza and Rahim, Nur Suhaila (1997) The design and testing of a wind turbine fo Malaysian wind condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H

Hamzah, Esah (Penterjemah) and Bahak, Mohd. Zubil (Penterjemah) (1997) Keluli : mikrostruktur dan sifat edisi kedua (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0108–0

Hasnan, Khalid (Penterjemah) (1997) Pengenalan kepada enjin pembakaran dalam edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0093–9

Husain, Adnan (1997) Investigation of thermal comfort in factory environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Idris, Ani (Penterjemah) and Hashim, Jasmi (Penterjemah) (1997) Pengenalan kepada bahan kejuruteraan edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0100–5

Idris, Ani (Penterjemah) and Nasir Ani, Farid (Penterjemah) and Mohd. Jaafar, Mohammad Nazri (Penterjemah) and Abu Bakar, Rosli (Penterjemah) and Abd. Latiff, Zulkarnain (Penterjemah) (1997) Pembakaran turbin gas (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0104–8

Ishak, Idris and Abu Hassan, Shukur (1997) Pembuatan panel badan kereta lumba Formula-M daripada bahan polimer komposit (GFRP). Jurnal Mekanikal, 2 (4). pp. 52-63. ISSN 0127-3396

Ishak, Idris and Abu Hassan, Shukur (1997) Pembangunan konsep reka bentuk prototaip kereta Formula-M. Jurnal Mekanikal, 1 (3). pp. 17-35. ISSN 0127-3396

J

Jantan, Muhammad Her (Penterjemah) (1997) Analisis unsur terhingga gunaan edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0084–X

Jayakumaran, Kalanithi (1997) Studies on ballising as a process for manufacturing high precision low-cost cylindrical bores. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Iberahin (1997) Stress utilisation of jacket structure under environmental loading. Jurnal Mekanikal, 1 (3). pp. 36-49. ISSN 0127-3396

K

Kadir, Kaidir (1997) Kajian prestasi pam haba dan penjimatan tenaga sistem penyaman udara domestik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. Yusuf, Md. Afendi (1997) Experimental study of paraffin wax potential as a physical modelling material for local environment. Jurnal Mekanikal, 2 (4). pp. 64-83. ISSN 0127-3396

Mainal, Mohd. Ramzan and Jaafar, Ghazali (1997) On the strength and vibration analysis of a 8000 dwt container ship propeller. Jurnal Mekanikal, 2 (4). pp. 29-51. ISSN 0127-3396

Mohamed Kamar, Haslinda (1997) Kajian ke atas ciri-ciri angin lintang di lebuhraya Malaysia : lokasi KM212 Ayer Keroh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri (1997) Development of radial aerodynamic swirlers. Jurnal Mekanikal, 2 (4). pp. 13-28. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri (1997) Emissions from gas burner, their impact on the environment and abatment techniques. Jurnal Mekanikal, 1 (3). pp. 50-70. ISSN 0127-3396

Mohd. Yusof, Alias (Penterjemah) and Mailah, Musa (Penterjemah) and Shaikh Ab. Rahman, Shaikh Nasir (Penterjemah) (1997) Litar perindustrian dan pengeluaran berautomatik. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0107–2

Muhamad, Zulkepli (1997) Squeeze casting process control and modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

N

Ngoediyo, Widjono (1997) Keberkesanan penyertaan swasta dan masyarakat dalam pengurusan pengumpulan sampah domestik : kajian kes Daerah Khusus Ibukota Jakarta, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

O

Omar, Hartini (1997) Analysis of energy consumtion in building using 'SHEAP' (Simplified Hourly Energy Analysis Package). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Fadil (1997) Penyingkiran kadmium dan plumbum dalam sampel-sampel air dan air larut lesap menggunakan tempurung kelapa sawit terubahsuai. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

Sockalingam, Mathivanan (1997) Study of structural integrity of a model steel bridge structure using ambient vibration method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

U

Ungku Mohamed Tahir, Ungku Haslina (1997) Performance analysis of LiBr - H2O double effect gas fired absorption chiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

W

Wan Abdul Rahman, Wan Aizan (1997) SMR/ENR50/PVC ternary blends : preparation, blending characteristics and compatibilization studies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Yahya, Mohd. Yazid (1997) Kelakuan plat plastik bertetulang kaca (GRP) segiempat terhadap bebanan tekanan melintang seragam dan letupan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Z

Zainuddin, Ahmad Zafri (Penterjemah) and Jantan, Muhammad Her (Penterjemah) and Ramli, Yahaya (Penterjemah) (1997) Mekanik bahan edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0072–6