Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Civil Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 458.

A

Ahmed, Kamal and Shahid, Shamsuddin and Nawaz, Nadeem and Khan, Najeebullah (2019) Modeling climate change impacts on precipitation in arid regions of Pakistan: a non-local model output statistics downscaling approach. Theoretical and Applied Climatology, 137 (1-2). pp. 1347-1364. ISSN 0177-798X

A. Hamid, A. R. and A. Razak, A. R and Yusof, A. M. and Jaya, R. P. and Zakaria, R. and Aminudin, E. and K. Anuar, M. A. S. and Yahya, K. and Haron, Z. and Yunus, R. and Rashid, I. A. (2019) Noncompliance of the occupational safety and health legislation in the Malaysian construction industry. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

A. Salman, Saleem and Shahid, Shamsuddin and Ismail, Tarmizi and Al-Abadi, Alaa M. and Wang, Xiao-jun and Chung, Eun-Sung (2019) Selection of gridded precipitation data for Iraq using compromise programming. Measurement: Journal of the International Measurement Confederation, 132 . pp. 87-98. ISSN 0263-2241

Ab. Kadir, M. A. and Khiyon, M. I. and Mohd. Sam, A. R. and Kueh, A. B. H. and Abdul Shukor Lim, N. H. and Mohamad Ali Mastor, M. N. and Zuhan, N. and Mohamed, R. N. (2019) Performance of spent garnet as a sand replacement in high-strength concrete exposed to high temperature. Journal of Structural Fire Engineering, 10 (4). pp. 468-481. ISSN 2040-2317

Ab. Kadir, Mariyana Aida and Abdul Awal, A. S. M. and Mohamad Zukri, Siti Nurul Nureda and Abd. Rahman, Nur Aqilah Syakirah and Mohd. Kasim, Siti Julaila and Ariffin, Nur Farhayu and A., Eeydzah (2019) Behaviour of treated rubberised fiber concretes at higher temperatures. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15 October 2018 - 16 October 2018, Palembang, Indonesia.

Ab. Karim, N. F. N. and Sarbini, N. N. and Abdul Shukor Lim, N. H. and Ibrahim, I. S. and Aminuddin, E. and Abu Talib, A. S. (2019) Thermal insulation properties of organic and inorganic material in clay brick - a review. In: International Conference on Sustainable Energy and Green Technology 2018, SEGT 2018, 11-14 Dec 2018, Hotel DoubleTree by Hilton Kuala Lumpur, Malaysia.

Abang Hasbollah, D. Z. and Mohamad, E. T. and Hezmi, M. A. and Abdullah, R. A. and Mohd. Yunus, N. Z. and Mustaffar, M. and Jusoh, S. N. and Azmi, M. and Ramli, M. H. and Mohd. Taib, A. (2019) Comparison study on the strength index of tropical shale and sandstone influenced by moisture content. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Abd. Hamid, N. and Ibrahim, A. and Adnan, A. (2019) S-n curve fatigue study and the stress-strain properties on the refurbish niti sma for reinforcing bar in concrete. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, UMP Pekan, Pahang, Malaysia, 31 Oct 2018.

Abd. Jamil, A. H. and Fathi, M. S. (2019) Contractual issues for Building Information Modelling (BIM)-based construction projects: An exploratory case study. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Adya Hotel Malawi, Langkawi, Kedah, Malaysia.

Abd. Radzaz, N. H. and Nawi, N. D. and Phang, F. A. and Musa, A. N. (2019) Student self-development through cooperative problem based learning (CPBL). International Journal of Recent Technology and Engineering (IJRTE), 8 (2). ISSN 2277-3878

Abd. Rahman, Mohd. Heidi Buyong (2019) Relationship between job satisfaction and job performance of a shipbuilding company in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abd. Rahman, N. A. and Muhamad Shah, M. A. and Muhamad, N. S. and Yaccob, A. A. and Zardasti, L. (2019) Compressive strength and infiltration characteristic of pervious concrete using recycled concrete aggregate. In: Postgraduate Symposium in Civil and Environmental Engineering 2019, PSCEE 2019, 31 March 2019, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, R. and Lausman, N. and Lim, W. M. and Mashros, N. and Mohd. Masirin, M. I. and Mustapa, M. S. and Hassan, M. F. (2019) The compliance of road users with the speed limit at school zones on federal road ft50 (km0-km23). International Journal of Engineering and Advanced Technology (IJEAT), 8 (5C). ISSN 2249 - 8958

Abd. Rashid, M. F. and Alias, N. and Ahmad, K. and Ramli, M. Z. and Ibrahim, Z. (2019) Vibration impact towards deformable laterite soil with different moisture content. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Abd. Rashid, M. F. and Alias, N. and Ahmad, K. and Sa'ari, R. (2019) Deformable unsaturated laterite soil under vibration impact with dissimilar moisture content. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Abd. Samat, R. and Khairudin, M. F. and Din, M. H. and Gamal Ali, G. and Fadzil, A. B. and Abu Bakar, S. (2019) Comparative structural performance of diagrid and bracing system in mitigation of lateral displacement. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Abdul Halim, N. H. F. and Alih, S. C. and Vafaei, M. (2019) Comparison between cyclic response of rc columns transversely reinforced with frp strips and carbon steel. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Abdul Hamid, A. R. and Azhari, R. and Zakaria, R. and Aminudin, E. and Jaya, R. P. and Nagarajan, L. and Yahya, K. and Haron, Z. and Yunus, R. (2019) Causes of crane accidents at construction sites in Malaysia. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Abdul Hassan, N. and Abdulhussein, A. A. and Mahmud, M. Z. H. and Mohamed Abdullah, N. A. and Mohd Shukry, N. A. and Mashros, N. and Putra Jaya, R. and Md Yusoff, N. I. (2019) Engineering properties of crumb rubber modified dense-graded asphalt mixtures using dry process. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Abdul Hassan, N. and Yaacob, H. and Mashros, N. and Idham, M. K. and Ahmad, J. and Jaya, R. P. (2019) Permeability coefficient of porous asphalt mixture containing coconut shells and fibres. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Abdul Hassan, Norhidayah and Ruzi, Nur Azni and Mohd. Shukry, Nurul Athma and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Mohd. Kamaruddin, Nurul Hidayah and Abdullah, Mohd. Ezree (2019) Physical properties of bitumen containing diatomite and waste engine oil. Malaysian Journal of Fundamental and Applied Sciences, 15 (4). pp. 528-531. ISSN 2289-5981

Abdul Rahim, Abdul Rafie (2019) Consequences of non-value adding activities on construction project performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Ahmad Fadzli Reza (2019) Keberkesanan pusat setempat (OSC) di pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Idris (2019) Isu etika di kalangan profesional dalam industri pembinaan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Wahab, Abdul Wahab and A. Aziz, Md. Maniruzzaman and Mohd. Sam, Abdul Rahman and Kok, Yeow You and Bhatti, Abdul Qadir and Kassim, Khairul Anuar (2019) Review on microwave nondestructive testing techniques and its applications in concrete technology. Construction and Building Materials, 209 . pp. 135-146. ISSN 0950-0618

Abdulkareem, Muyideen and Bakhary, Norhisham and Vafaei, Mohammadreza and Md. Noor, Norhazilan and Abd. Samat, Roslida (2019) Experimental damage assessment of support condition for plate structures using wavelet transform. Journal of Theoretical and Applied Mechanics (Poland), 57 (2). pp. 501-518. ISSN 1429-2955

Abdulkareem, Muyideen and Bakhary, Norhisham and Vafaei, Mohammadreza and Md. Noor, Norhazilan and Mohamed, Roslli Noor (2019) Application of two-dimensional wavelet transform to detect damage in steel plate structures. Measurement: Journal of the International Measurement Confederation, 146 . pp. 912-923. ISSN 0263-2241

Abdullah, M. and Israr, H.A. and Wong, K.J. and Gan, K.W. (2019) Tensile behaviour of hybrid composites between glass and short carbon fibres. Jurnal Mekanikal, 42 . pp. 35-42. ISSN 2289-3873

Abdulrahman, S. and Hainin, M. R. and Idham, M. K. and Hassan, N. A. and Warid, M. N. M. and Yaacob, H. and Azman, M. and Puan, O. C. (2019) Physical properties of warm cup lump modified bitumen. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Abdulrahman, S. and Hainin, M. R. and Satar, M. K. I. M. and Hassan, N. A. and Usman, A. (2019) Rutting and moisture damage evaluation of warm mix asphalt incorporating POFA modified bitumen. International Journal of Engineering and Advanced Technology, 9 (1). ISSN 2249-8958

Abidin, N. I. A. and Zakaria, R. and Aminuddin, E. and Shamsuddin, S. M. and Mustafa, M. and Khan, J. S. (2019) Decision making tool for retrofitting of existing building for energy reduction in higher learning institution. In: 7th International Conference on Euro Asia Civil Engineering Forum, EACEF 2019, 30 Sep - 2 Oct 2019, Stuttgart, Germany.

Abidin, N. I. A. and Zakaria, R. and Pauzi, N. N. M. and Mustaffar, M. and Saleh, A. L. and Bandi, M. (2019) Building energy intensity measurement for potential retrofitting of zero energy building in higher learning institution. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Abu Bakar, S. and Algaifi, H. A. A. and Abd. Samat, R. (2019) Geometric nonlinear formulation of plate buckling structure. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Abu Hari, Farahazliza Hazie (2019) Kesedaran arkitek terhadap liabiliti profesional dalam pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abu Talib, Z. and Kassim, A. and Yusak, G. H. and Mohd. Yusof, M. F. and Ling, F. N. G. (2019) Influence of burrow holes in residual soil slope infiltration. International Journal of Integrated Engineering, 11 (2). pp. 280-290. ISSN 2229-838X

Adamu, Ibrahim Aliyu (2019) Microwave properties of bitumen modified with waste cooking oil (WCO). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Adeniyi, S. M. and Mohamed, S. F. and Ademola, M. S. (2019) Appropriate green materials for affordable building construction in Nigeria. Page 1 International Journal of Recent Technology and Engineering (IJRTE), 8 (4). ISSN 2277-3878

Adole, A. M. and Yatim, J. M. and Ramli, S. A. and Othman, A. and Mizal, N. A. (2019) Kenaf fibre and its bio-based composites: a conspectus. Pertanika Journal of Science and Technology, 27 (1). pp. 297-329. ISSN 0128-7680

Adzar, J. A. and Zakaria, R. and Aminudin, E. and Abd. Rashid, M. H. S. and Munikanan, V. and Shamsudin, S. M. and Sooria, S. Z. and Hassan, M. M. (2019) Sustainable operation and maintenance criteria for non-toll road green rating system. In: 7th International Conference on Euro Asia Civil Engineering Forum, EACEF 2019, 30 Sep - 2 Oct 2019, Stuttgart, Germany.

Adzar, J. A. and Zakaria, R. and Aminudin, E. and Rashid, M. H. S. A. and Munikanan, V. and Shamsudin, S. M. and Rahman, M. F. A. and Wah, C. K. (2019) Development of operation and maintenance sustainability index for penarafan hijau Jabatan Kerja Raya (pHJKR) green road rating system. In: 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ag Mumin, A. M. and Tahir, M. M. and Ngian, S. P. and Shukor, H. and Khan, M. R. and Tukirin, S. A. (2019) Flexural behaviour of interlocking brick system with grout cement mixed with various fibre. In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20-22 Aug 2019, Langkawi, Kedah, Malaysia.

Ahmad, F. and Azman, S. and Said, M. I. M. and Hamid, N. H. A. and Harun, H. and Awang, M. and Rahman, M. A. A. (2019) Interaction fugacity model for water, sediment and seagrass. International Journal of Innovative Technology and Exploring Engineering, 8 (9). pp. 406-410. ISSN 2278-3075

Ahmad, J. and Jaya, R. P. and Masri, K. A. and Nurulain, C. M. and Mohd. Warid, M. N. and Abdul Hassan, N. and Yaacob, H. (2019) Performance of nano kaolin clay as modified binder in porous asphalt mixture. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Ahmad, Kabiru Abdullahi and Abdul Hassan, Norhidayah and Abdullah, Mohd. Ezree and Bilema, Munder A. M. and Usman, Nura and Al Allam, Al Allam Musbah and Hainin, Mohd. Rosli (2019) Image processing procedure to quantify the internal structure of porous asphalt concrete. Multidiscipline Modeling in Materials and Structures, 15 (1). pp. 206-226. ISSN 1573-6105

Ahmad, N. F. A. and Harun, S. and Hamed, H. N. A. (2019) Particle swarm optimization of multi-linear regression for evapotranspiration estimation model. Test Engineering and Management, 81 (11-12). pp. 858-866. ISSN 0193-4120

Ahmad, N. F. A. and Harun, S. and Hamed, H. N. A. and Sahat, S. and Razali, S. N. M. and Kaamin, M. (2019) The application of particle swarm optimization in estimating potential evapotranspiration: a brief review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 135-143. ISSN 2289-7879

Ahmad, Rosli (2019) Development of web-based life cycle cost analysis for green building index energy efficiency evaluation. PhD thesis, Universiti Teknologi Malaysia.

Ahmad, S. W. and Qing, L. J. and Adnan, A. and Nazir, R. and Ramli, N. I. and Ali, M. I. and Adiyanto, M. I. and Muthusamy, K. (2019) Unity check of typical offshore wellhead platform in Malaysia using Aceh earthquake loading data and sap2000. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Ahmad, Y. and Hamzah, S. F. (2019) Study on specimens shapes for tensile test of Malaysia bamboo. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Ahmed, Kamal and Sachindra, Dhanapala A. and Shahid, Shamsuddin and Demire, Mehmet C. and Chung, Eun Sung (2019) Selection of multi-model ensemble of general circulation models for the simulation of precipitation and maximum and minimum temperature based on spatial assessment metrics. Hydrology and Earth System Sciences, 23 (11). pp. 4803-4824. ISSN 1027-5606

Ahmed, Kamal and Shahid, Shamsuddin and Chung, Eun Sung and Wang, Xiao Jun and Harun, Sobri (2019) Climate change uncertainties in seasonal drought severity-area-frequency curves: case of arid region of Pakistan. Journal of Hydrology, 570 . pp. 473-485. ISSN 0022-1694

Ahmed, Kamal and Shahid, Shamsuddin and Demirel, Mehmet Cüneyd and Nawaz, Nadeem and Khan, Najeebullah (2019) The changing characteristics of groundwater sustainability in Pakistan from 2002 to 2016. Hydrogeology Journal, 27 (7). pp. 2485-2496. ISSN 1431-2174

Ahmed, Kamal and Shahid, Shamsuddin and Sachindra, D. A. and Nawaz, Nadeem and Chung, Eun Sung (2019) Fidelity assessment of general circulation model simulated precipitation and temperature over Pakistan using a feature selection method. Journal of Hydrology, 573 . pp. 281-298. ISSN 0022-1694

Ahmed, Kamal and Shahid, Shamsuddin and Wang, Xiaojun and Nawaz, Nadeem and Khan, Najeebullah (2019) Evaluation of gridded precipitation datasets over arid regions of Pakistan. Water (Switzerland), 11 (2). pp. 1-22. ISSN 2073-4441

Ahmed, Kamal and Shahid, Shamsuddin and Wang, Xiaojun and Nawaz, Nadeem and Khan, Najeebullah (2019) Spatiotemporal changes in aridity of Pakistan during 1901-2016. Hydrology and Earth System Sciences, 23 (7). pp. 3081-3096. ISSN 1027-5606

Ahmed, Y. and Sipan, I. (2019) Critical success factors of public private partnership for affordable housing in Nigeria. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S9). ISSN 2277-3878

Aie, Nyemas Dewi Pramita (2019) Preliminary assessment on land surface temperature map and slope stability at Jelutong landfill. Masters thesis, Universiti Teknologi Malaysia.

Aisyah, S. and Vafaei, M. and Alih, S. C. and Aljwim, K. (2019) Seismic fragility of tall concrete wall structures in Malaysia under far-field earthquakes. Open Civil Engineering Journal, 13 (1). pp. 140-146. ISSN 1874-1495

Al-Bahr, T. M. and Puan, O. C. and Hassan, S. A. and Idham, M. K. and Ismail, C. R. (2019) Parameters affecting fluctuation in traffic stream on urban roads. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Al. Ramanathan, Karthigeyan and Abdullah, Rini Asnida (2019) Effects of quarry blasting towards the residential area at Kangkar Pulai, Johor, Malaysia. Sains Malaysiana, 48 (8). pp. 1583-1592. ISSN 0126-6039

Alamgir, M. and Ahmed, K. and Homsi, R. and Dewan, A. and Wang, J. J. and Shahid, S. (2019) Downscaling and projection of spatiotemporal changes in temperature of Bangladesh. Earth Systems and Environment, 3 (3). pp. 381-398. ISSN 2509-9426

Alamgir, Mahiuddin and Mohsenipour, Morteza and Homsi, Rajab and Wang, Xiaojun and Shahid, Shamsuddin and Shiru, Mohammed Sanusi and Alias, Nor Eliza and Yuzir, Ali (2019) Parametric assessment of seasonal drought risk to crop production in Bangladesh. Sustainability (Switzerland), 11 (5). pp. 1-17. ISSN 2071-1050

Aldulaimi, Musaab Adil Abdullah (2019) Best value procurement for contractor selection in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alenzi, E. and Puan, O. C. and Hassan, H. A. (2019) Car following behaviours on multilane highways in kuwait: as case study on 6th ring road. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur; Malaysia.

Aletba, S. R. O. and Abdul Hassan, N. and Aminuddin, E. and Jaya, R. P. and Mohd. Shukry, N. A. and Mashros, N. and Aziz, M. M. A. and Md. Nor, H. (2019) Thermal performance of waste materials as aggregate replacement in asphalt pavement. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Ali, W. and Abdullah, R. A. and Rehman, H. and Junaid, M. (2019) The effect of scanline direction and extent of rock exposure on assessment of geometrical properties of discontinuities in rock mass. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ali Jattak, Z. and Abdul Hassan, N. and Mohd. Shukry, N. A. and Mohd. Satar, M. K. I. and Mohd. Warid, M. N. and Md. Nor, H. and Mohd. Yunus, N. Z. (2019) Characterization of industrial by-products as asphalt paving material. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Alih, Sophia C. and Vafaei, Mohammadreza (2019) Performance of reinforced concrete buildings and wooden structures during the 2015 Mw 6.0 Sabah earthquake in Malaysia. Engineering Failure Analysis, 102 . pp. 351-368. ISSN 1350-6307

Alsahn, Safaa Abbas Sadej (2019) Flexural behaviour of reinforced concrete beam incorporating coal waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwaely, Ammar Mohammed Oda (2019) Strategy of minimizing delay in public construction projects through implementation of electronic procurement system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwee, Amir Akmal (2019) Issues and challenges of maintenances works for Universiti Teknikal Malaysia Melaka (UTeM) student accommodation under private finance initiative. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwjim, Kotaiba (2019) Seismic fragility curves for tall wall concrete buildings in Malaysia under near-field earthquakes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Amat Bakri, Nurul Khalida (2019) Risk management of design and build project. Masters thesis, Universiti Teknologi Malaysia.

Aminuddin, K. M. and Saggaff, A. and Tahir, M. M. (2019) Structural behaviour of slip-in gusset plate connection for double lipped channel cold formed steel using partial strength connection. International Journal of Scientific and Technology Research, 8 (9). pp. 89-95. ISSN 2277-8616

Amsyar, Faisal and Ma, Chau Khun and Omar, Wahid and Awang, Abdullah Zawawi and Shek, Poi Ngian (2019) Behaviour of lightweight foamed concrete with pre-tensioning steel straps confinement. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Arani, Khosro Shahpoori and Zandi, Yousef and Pham, Binh Thai and Mu'azu, M. A. and Katebi, Javad and Mohammadhassani, Mohammad and Khalafi, Seyedamirhesam and Mohamad, Edy Tonnizam and Wakil, Karzan and Khorami, Majid (2019) Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer. Computers and Concrete, 23 (1). pp. 61-68. ISSN 1598-8198

Arfat, M. and Yaacob, H. and Hassan, N. A. and Warid, M. N. M. and Idham, M. K. and Ismail, C. R. and Nor, H. M. and Hainin, M. R. and Mohamed, A. and Mashros, N. and Yunus, N. Z. M. and Hassan, S. A. and Jaya, R. P. and Ayob, M. F. (2019) Reversible moisture damage in asphalt mixture. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ariff, R. and Sriyolja, Z. and Wibawa, A. and Nofita, H. and Yahya, K. and Sharif, S . (2019) Developing a behavioural green index (BGI): introduce a framework and changing behaviour. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Arifin, Hanis Hazirah and Zainal, Nurfarahin and Zardasti, Libriati and Yahaya, Nordin and Lim, Kar Sing and Md Noor, Norhazilan (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi, 31 (8). pp. 169-177. ISSN 2180-3722

Armaghani, Danial Jahed and Koopialipoor, Mohammadreza and Marto, Aminaton and Yagiz, Saffet (2019) Application of several optimization techniques for estimating tbm advance rate in granitic rocks. Journal of Rock Mechanics and Geotechnical Engineering, 11 (4). pp. 779-789. ISSN 1674-7755

Arman, Nor Zaiha and Salmiati, Salmiati and Mohd. Said, Mohd. Ismid and Aris, Azmi (2019) Development of macroinvertebrate-based multimetric index and establishment of biocriteria for river health assessment in Malaysia. Ecological Indicators, 104 . pp. 449-458. ISSN 1470-160X

Arumugam, S. K. and Muhamad, R. and Yahya, K. (2019) Implementation of eco-costs per value ratio (evr) on construction waste management in shah alam, malaysia. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Attahiru, Yusuf Babangida and A. Aziz, Md. Maniruzzaman and Kassim, Khairul Anuar and Shahid, Shamsuddin and Wan Abu Bakar, Wan Azelee and N. Sashruddin, Thanwa Filza and Abdul Rahman, Farahiyah and Ahamed, Mohd. Imran (2019) A review on green economy and development of green roads and highways using carbon neutral materials. Renewable and Sustainable Energy Reviews, 101 . pp. 600-613. ISSN 1364-0321

Awang, H. and Song, K. I. and Abdullah, R. A. (2019) Effect of void ratio to the strength parameters of sedimentary rocks. Bulletin of the Geological Society of Malaysia, 68 . pp. 147-150. ISSN 0126-6187

Awang Ismail, D. S. and Kassim, A. and Mohamad, H. and A. Rashid, A. S. and Bunawan, A. R. (2019) Monitoring strain development of soil slope using distributed optical fibre sensor. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Azam, M. and Puan, O. C. and Hassan, S. A. and Mashros, N. (2019) Calibration of microsimulation model for tight urban diamond interchange under heterogeneous traffic. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Azhar, Shahrizal (2019) The causes of project delay in the ministry of defence, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Azhari, S. F. and Puan, O. C. and Hassan, S. A. and Mashros, N. and Warid, M. N. and Lopa, R. S. (2019) Estimation of critical gap at small roundabout. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Azili, Norshahida (2019) Implication of liability transfer towards architect in the issuance of certificate of completion and compliance (ccc) in building industry. Masters thesis, Universiti Teknologi Malaysia.

Azman, Nadiah (2019) Building condition assessment on a heritage building : Dato Abdullah Jaafar building. Masters thesis, Universiti Teknologi Malaysia.

Azmi, M. and Ramli, M. H. and Hezmi, M. A. and Mohd. Yusoff, S. A. N and Alel, M. N. A. (2019) Estimation of soil water characteristic curves (SWCC) of mining sand using soil suction modelling. In: IOP Conference Series: Materials Science and Engineering, Volume 527, 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Azmi, Nurshazriena (2019) The implementation of building information modeling in MACalaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

Azmi, Nurshazriena (2019) The implementation of building information modeling in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

B

Babatunde, Ogunbode Ezekiel and Mohamad Yatim, Jamaludin and Affendi, Hazim and Abdul Aziz, Azmahani and Mohd. Yunus, Ishak and Abdul Hamid, Hazlan (2019) An evaluation of the interfacial bond strength of kenaf fibrous concrete and plain concrete composite. International Journal of Built Environment and Sustainability, 6 (1). pp. 1-6. ISSN 2289-8948

Baharudin, Nur Azlin (2019) Settlement assessment of soft soil reinforced by partially penetrated by soil cement column. Masters thesis, Universiti Teknologi Malaysia.

Balaji, R. and Yaakob, O. and Koh, K. K. and Adnan, F. A. and Ismail, N. and Ahmad, B. and Ismail, M. A. (2019) A study of ballast water treatment using engine waste heat. Journal of The Institution of Engineers (India), 100 (2). pp. 255-269. ISSN 2250-0545

Balakrishnan, B. and Ismail, M. and Khalid, N. H. A. (2019) Flow and strength properties of masonry cement mortar containing high-volume fly ash. Journal of Solid Waste Technology and Management, 45 (2). pp. 131-138. ISSN 1088-1697

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Gohari, Adel (2019) Sustainable materials selection based on flood damage assessment for a building using LCA and LCC. Journal of Cleaner Production, 222 . pp. 844-855. ISSN 0959-6526

Bamaga, S. O. and Tahir, M. M. and Tan, C. S. and Shek, P. N. and Aghlara, R. (2019) Push-out tests on three innovative shear connectors for composite cold-formed steel concrete beams. Construction and Building Materials, 223 . pp. 288-298. ISSN 0950-0618

Barudin, N. M. and Yaacob, H. and Hassan, N. A. and Warid, M. N. M. and Idham, M. K. and Ismail, C. R. and M. Nor, H. and Hainin, M. R. and Mohamad, A. and Afiqah, R. N. and Ayob, M. F. and Jaya, R. P. (2019) Correlation between functional and structural properties of flexible pavement. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Basius, Mohd. Syafiq (2019) Energy dissipation and ductility of steel plate shear wall with perforation. Masters thesis, Universiti Teknologi Malaysia.

Baskara, S. N. and Yaacob, H. and Hainin, M. R. and Hassan, S. A. and Mashros, N. and M. Yunus, N. Z. and Hassan, N. A. and Warid, M. N. M. and Idham, M. K. and Ismail, C. R. and M. Nor, H. and Mohamad, A. and A. Aziz, M. M. and Afiqah, R. N. and Ahmad, M. S. A. and Jaya, R. P. (2019) Influence of pavement condition towards accident number on Malaysian highway. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Basri, Hazlami Fikri and Anuar, Aznah Nor and Ab. Halim, Mohd. Hakim (2019) Wastewater characterization and sequencing batch reactor operation for Aerobic Granular Sludge cultivation. Malaysian Journal Of Civil Engineering, 31 (1). pp. 9-16. ISSN 1823-7843

Bello, Al-Amin Danladi and Mohd. Haniffah, Mohd. Ridza and Hanapi, Muhammad Nassir (2019) Responses of stream water quality concentrations to vegetative cover variation in Muar River watershed. Geology, Ecology, and Landscapes, 3 (3). pp. 210-222. ISSN 2474-9508

Bhatawdekar, R. M. and Edy, M. T. and Danial, J. A. (2019) Building information model for drilling and blasting for tropically weathered rock. Journal of Mines, Metals and Fuels, 67 (11). pp. 494-500. ISSN 0022-2755

Bhatawdekar, R. M. and Mohamad, E. T. and Babu, S. M. (2019) Hard rock excavation without blasting for civil engineering and mining projects. Journal of Mines, Metals and Fuels, 67 (4). pp. 227-231. ISSN 0022-2755

Bhatawdekar, R. M. and Mohamad, E. T. and Singh, T. N. and Armaghani, D. J. (2019) Drilling and blasting improvement in aggregate quarry at Thailand - a case study. Journal of Mines, Metals and Fuels, 67 (7). pp. 357-362. ISSN 0022-2755

Bilal, Hazrat and Chamhuri, Siwar and Mokhtar, Mazlin and Kanniah, Kasturi Devi (2019) Recent snow cover variation in the upper Indus Basin of Gilgit Baltistan, Hindukush Karakoram Himalaya. Journal of Mountain Science, 16 (2). pp. 296-308. ISSN 1672-6316

Bsharat, M. and Ibrahim, O. B. and Bsharat, S. (2019) Proposing a new model for quality of service acceptance. International Journal of Recent Technology and Engineering, 8 (2). pp. 1995-1999. ISSN 2277-3878

Bui, Dieu Tien and Moayedi, Hossein and Kalantar, Bahareh and Osouli, Abdolreza and Pradhan, Biswajeet and Nguyen, Hoang and A. Rashid, Ahmad Safuan (2019) A novel Swarm Intelligence—Harris Hawks optimization for spatial assessment of landslide susceptibility. Sensors (Basel, Switzerland), 19 (16). pp. 1-22. ISSN 1424-8220

C

Chai, C. S. and Tan, C. S. and Ahmad Bajuri, F. A. and Loo, S. C. and Md. Yusof, A. and Lee, X. S. (2019) Building information modelling in Malaysian industrialised building system. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Chai, T. J. and Tan, C. S. (2019) Review on deployable structure. In: he 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 Aug 2018, Johor, Malaysia.

Chai, Yen Khai and Lam, How Chun and Koo, Chai Hoon and Lau, Woei Jye and Lai, Soon Onn and Ismail, Ahmad Fauzi (2019) Performance evaluation of polyamide nanofiltration membranes for phosphorus removal process and their stability against strong acid/alkali solution. Chinese Journal of Chemical Engineering, 27 (8). pp. 1789-1797. ISSN 1004-9541

Chang, Teck Leong (2019) Soil slope remediation works using soil nail. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Che Abd. Aziz, Ahmad Syarifuddin (2019) Risk assessment of mechanical workshop at Politeknik Sultan Azlan Shah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Che Wahid, C. M. F. H and Ramli, M. R. and Aminudin, E. and Noor, Z. Z. and Neardey, M. and Zakaria, R. and Hainin, M. R. and Mohamad Zin, R. and Mohd. Satar, M. K. I. and Mohd. Warid, M. N. and Abd. Majid, M. Z. and Saar, C. C. (2019) Review on the method for carbon footprint calculation of highway development. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018.

Che Wahid, C. M. F. H. and Aminudin, E. and Abd. Majid, M. Z. and Hainin, M. R. and Mohd. Satar, M. K. I. and Mohd. Warid, M. N. and Zakaria, R. and Ramli, M. R. and Zin, R. M. and Noor, Z. Z. and Mazlan, A. N. and Yousif, O. S. and Neardey, M. and Jais, A. M. and Abdullah, R. and Mohd. Yazid, Y. S. and Ahmad, N. F. (2019) Carbon footprints calculator of highway pavement rehabilitation: the quantification of carbon emissions per unit activity. In: 10th Malaysian Road Conference and Exhibition 2018, 29-31 October 2018, Sunway Pyramid Convention Centre Petaling Jaya, Selangor, Malaysia.

Chen, Chulin and Shi, Lei and Shariati, Mahdi and Toghroli, Ali and Mohamad, Edy Tonnizam and Bui, Dieu Tien and Khorami, Majid (2019) Behavior of steel storage pallet racking connection - a review. Steel and Composite Structures, 30 (5). pp. 457-469. ISSN 1229-9367

Chen, Chulin and Yousif, Salim Taib and Najem, Rabi' Muyad and Abavisani, Ali and Pham, Binh Thai and Wakil, Karzan and Mohamad, Edy Tonnizam and Khorami, Majid (2019) Optimum cost design of frames using genetic algorithms. Steel and Composite Structures, 30 (3). pp. 293-304. ISSN 1229-9367

Chin, Chee Loong and Ma, Chau Khun and Tan, Jia Yang and Ong, Chin Boon and Awang, Abdullah Zawawi and Omar, Wahid (2019) Review on development of external steel-confined concrete. Construction and Building Materials, 211 . ISSN 0950-0618

Chong, Jia Wen (2019) Construction waste management practice towards sustainable development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Chowdhury, A. F. M. Kamal and Kar, Kanak Kanti and Shahid, Shamsuddin and Chowdhury, Rezaul and Rashid, Md. Mamunur (2019) Evaluation of spatio‐temporal rainfall variability and performance of a stochastic rainfall model in Bangladesh. International Journal of Climatology, 39 (11). pp. 4256-4273. ISSN 0899-8418

Couth, Samuel and Mazlan, Ain Naadia and Moore, David R. and Munro, Kevin J. and Dawes, Piers (2019) Hearing difficulties and tinnitus in construction, agricultural, music, and finance industries: contributions of demographic, health, and lifestyle factors. Trends in Hearing, 23 . ISSN 2331-2165

D

Dahari, N. and Muda, K. and Hussein, N. and Latif, M. T. and Khan, M. F. and Mohamad Khir, M. S. (2019) Long-range transport and local emission of atmospheric pm2.5 in southern region of Peninsular Malaysia. In: 3rd International Conference on Architecture and Civil Engineering 2019, ICACE 2019, 26-27 June 2019, Kuala Lumpur, Malaysia.

Daniel, N. H. and Hassan, N. A. and Idham, M. K. and Jaya, R. P. and Hainin, M. R. and Ismail, C. R. and Puan, O. C. and Azahar, N. M. (2019) Properties of bitumen modified with latex. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Dehghanbanadaki, Ali and Khari, Mahdy and Arefnia, Ali and Ahmad, Kamarudin and Motamedi, Shervin (2019) A study on UCS of stabilized peat with natural filler: A computational estimation approach. KSCE Journal of Civil Engineering, 23 (4). pp. 1560-1572. ISSN 1226-7988

Dewedree, S. and Jusoh, S. N. (2019) Slope stability analysis under different soil nailing parameters using the slope/w software. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur Convention Centre Kuala Lumpur, Malaysia.

Dieu, Tien Bui and Moayedi, Hossein and Mohammed Abdullahi, Mu’azu and A. Rashid, Ahmad Safuan and Nguyen, Hoang (2019) Prediction of pullout behavior of belled piles through various machine learning modelling techniques. Sensors (Switzerland), 19 (17). p. 3678. ISSN 1424-8220

E

Ezechi, E. H. and Kutty, S. R. M. and Muda, Khalida and Yaqub, Asim (2019) A comparative evaluation of an integrated hybrid bioreactor treating industrial wastewater. Journal of Water Process Engineering, 31 . p. 100805. ISSN 2214-7144

Einab, Abdirahman Abshir (2019) Elements that will improve driver’s safety during poor weather conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

El-Sayed, O. M. and Jusoh, N. and Adbullah, R. A. and Abang Hasbollah, D. Z. (2019) 3-D numerical model of jack force interaction to segmental tunnel lining in soft soil. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Entika, Christie Lanjing (2019) Contextualised action learning framework in developing entrepreneurial skills for civil engineering students. PhD thesis, Universiti Teknologi Malaysia.

Euniza, J. and Md. Nor, H. and Haron, Z. and Abdul Hakim, N. and Yaacob, H. and Putra Jaya, R. and Mohamed Nazri, F. and Ahmad, J. (2019) Porosity and density characteristic of double-layer concrete paving blocks incorporating rubber granules. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Ezechi, Ezerie Henry and Muda, Khalida (2019) Optimization of methylene blue biosorption and mass transfer resistance on Gardenia carinata activated carbon. Desalination and Water Treatment, 158 . pp. 343-352. ISSN 1944-3994

F

Faiz, R. U. and Mashros, N. and Abbas, H. Z. U. and Hassan, S. A. (2019) Aberrant behaviour plausibility in road traffic violations, errros and lapses. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur; Malaysia.

Fakhruddin, Khalid Ahmed (2019) Reliability assessment and calibration of ISO-LRFD factors for minimum facility offshore platfrom in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Fathol Karib, Siti Aisyah (2019) Seismic fragility of tall concrete wall structures in Malaysia under far-field earthquakes. Masters thesis, Universiti Teknologi Malaysia.

Foo, Hui Mean and Yusof, Fadhilah and Yusop, Zulkifli and Jamaludin, Suhaila (2019) Trivariate copula in drought analysis: a case study in peninsular Malaysia. Theoretical and Applied Climatology, 138 (1-2). pp. 657-671. ISSN 0177-798X

Fulazzaky, Mohamad Ali and Nuid, Maria and Aris, Azmi and Fulazzaky, Mohammad and Sumeru, Kasni and Muda, Khalida (2019) Mass transfer kinetics of phosphorus biosorption by aerobic granules. Journal of Water Process Engineering, 31 . pp. 1-8. ISSN 2214-7144

Fung, Alex Hui Siang (2019) Seismic fragility assessment of tall concrete wall structures in Malaysia under far-field earthquakes considering mass irregularity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

G

Gan, Zhi Han (2019) Non-linear analysis of RC bridge slab on prestressed beams in transverse direction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ghaleini, Ebrahim Noroozi and Koopialipoor, Mohammadreza and Momenzadeh, Mohammadreza and Sarafraz, Mehdi Esfandi and Mohamad, Edy Tonnizam and Gordan, Behrouz (2019) A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls. Engineering with Computers, 35 (2). pp. 647-658. ISSN 0177-0667

Giwangkara, G. G. and Mohamed, A. and Khalid, N. H. A. and Nor, H. M. and Hainin, M. R. and Jaya, R. P. and Sani, W. N. H. M. and Ismail, C. R. and Aziz, M. M. A. (2019) Recycled concrete aggregate as a road base material. In: 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Gordan, Behrouz and Koopialipoor, Mohammadreza and Clementking, A. and Tootoonchi, Hossein and Mohamad, Edy Tonnizam (2019) Stimating and optimizing safety factors of retaining wall through neural network and bee colony techniques. Engineering with Computers, 35 (3). pp. 945-954. ISSN 0177-0667

Gyeyok, Ashio Gillian (2019) Implementation of green materials as supplementary cement replacement in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

H

Hooi, Chie Lee and Abd. Wahab, Ahmad Khairi (2019) Performance of different turbulence models in predicting flow kinematics around an open offshore intake. SN Applied Sciences, 1 (10). ISSN 2523-3963

Hafifi, C. M. F. and Wahid, C. and Hainin, M. R. and Hainin, E. and Neardey, M. and Majid, M. Z. A. and Ramli, M. R. (2019) Carbon footprint calculator for Malaysia green highway index. In: 8th International Conference on Informatics, Environment, Energy and Applications, IEEA 2019, 16-19 March 2019, Osaka, Japan.

Hainin, M. R. and Ibrahim, M. Y. M. and Khairul Idham, M. S. M. and Mashros, N. and Jaya, R. P. and Idris, A. M. and Ibrahim, M. H. W. and Fadzli, M. N. (2019) Porosity and permeability properties of nano black rice hush ash in porous concrete pavement. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Halim, H. and Hilmi, N. H. F.M. and Yusob, M. F. M. and Hamid, N. F. N. and Nor, N. A. M. and Sukor, N. S. A. and Rahman, N. A. and Haron, Z. and Wahab, F. (2019) Comparison of road traffic noise near high, medium and low density residential areas in Nibong Tebal and Juru, Penang. International Journal of Integrated Engineering, 11 (2). pp. 87-98. ISSN 2229-838X

Halim, Herni and Hamid, Nur Fatin Najiyah and Mahamad Yusob, Mohamad Firdaus and Mohamad Nor, Nur Atiqah and Mohd. Hilmi, Nur Hanani Farhah and Abdul Sukor, Nur Sabahiah and Abdul Rahman, Noorhazlinda and Haron, Zaiton and Wahab, Faridah (2019) Road traffic noise levels at different types of residential areas in Nibong Tebal, Penang. International Journal of Integrated Engineering, 11 (1). pp. 101-112. ISSN 2229-838X

Halim, Herni and Mohamad Nor, Nur Atiqah and Yusob, Firdaus and Mohd. Hilmi, Nur Hanani Farhah and Hamid, Nur Fatin Najiyah and Abdul Sukor, Nur Sabahiah and Abd. Rahman, Noorhazlinda and Haron, Zaiton and Wahab, Faridah (2019) Comparison of road traffic noise at residential areas in Klang Valley, Selangor and Nibong Tebal, Penang. International Journal of Integrated Engineering, 11 (1). pp. 120-130. ISSN 2229-838X

Halim, N. H. F. A. and Alih, S. C. and Vafaei, M. (2019) Analytical calculation on shear capacity of rc columns internally confined with cfrp strips. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Hamdi, Noor Faezah (2019) The effect of thermal ageing on low voltage cross-linked polyethylene insulated cable. Masters thesis, Universiti Teknologi Malaysia.

Hamid, A. R. A. and Noor Azmi, M. R. A. and Aminudin, E. and Jaya, R. P. and Zakaria, R. and Zawawi, A. M. M. and Yahya, K. and Haron, Z. and Yunus, R. and Saar, C. C. (2019) Causes of fatal construction accidents in Malaysia. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Hamid, N. A. and Adnan, A. (2019) Cyclic tensile of refurbish NiTi reinforcement bar for seismic mitigation. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 Oct 2018, UMP Pekan, Pahang, Malaysia.

Hamid, N. A. and Ibrahim, A. and Adnan, A. (2019) Smart structures with pseudoelastic and pseudoplastic shape memory alloy: a critical review of their prospective feasibility and current trends. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 Oct 2018, UMP Pekan, Pahang, Malaysia.

Hamzani, Intan Nurfauzirah Shafiqah (2019) Bus rapid transit at isolated vehicle actuated junction using recall and green extension bus priority strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harith, N. S. H. and Tongkul, F. and Adnan, A. and Shoushtari, A. V. (2019) Seismic hazard analysis for east Malaysia; based on a proposed ground motion prediction equation. In: 7th International Conference on Euro Asia Civil Engineering Forum, EACEF 2019, 30 Sep - 2 Oct 2019, Stuttgart, Germany.

Haron, Z. and Darus, N. and Yahya, K. and Halim, H. and Mazlan, A. N. and Hezmi, M. A. and Jahya, Z. (2019) Review on traffic noise problem in Malaysia. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Haron, Z. and Darus, N. and Yahya, K. and Mashros, N. and Jahya, Z. and Hezmi, M. A. and Halim, H. and Othman, M. H. (2019) The effect of vehicle weight on the sound produced by transverse rumble strips. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 5031-5047. ISSN 2289-4659

Haron, Z. and Jamaludin, J. and Darus, N. and Yahya, K. and Jahya, Z. and Mashros, N. and Hezmi, M. A. (2019) A case study of acoustic efficiency of existing noise barrier in reducing road traffic noise in school area. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Harun, Mazlan (2019) Stability analysis for slope rehabilitation works at km424.80 South bound, North South expressway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harun, Mohd. Safwan (2019) Mechanical properties and short-term performance of sulphate resistance of effective microorganisms-fly ash geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harun, Mohd. Safwan (2019) Mechanical properties and short-term performance of sulphate resistance of effective microorganisms–fly ash geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hassan, Norlizawati and Wan Hassan, Wan Hasmida and A. Rashid, Ahmad Safuan and Latifi, Nima and Mohd. Yunus, Nor Zurairahetty and Horpibulsuk, Suksun and Moayedi, Hossein (2019) Microstructural characteristics of organic soils treated with biomass silica stabilizer. Environmental Earth Sciences, 78 (12). p. 367. ISSN 1866-6280

Hendriyawan, Hendriyawan and Primananda, M. Abby and Puspita, Anisa Dwi and Guo, Chao and Hamdhan, Indra Noer and Tahir, M. M. and Pham, Binh Thai and Mu'azu, M. A. and Khorami, Majid (2019) Simplification analysis of suction pile using two dimensions finite element modeling. Geomechanics and Engineering, 17 (4). pp. 317-322. ISSN 2005-307X

Hossain, Md. Awlad (2019) Effect of effective micro-organism on temperature variation and properties of concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hossain, Mohammad S. and Hashim, Mazlan and Bujang, Japar S. and Zakaria, Muta H. and Muslim, Aidy M. (2019) Assessment of the impact of coastal reclamation activities on seagrass meadows in Sungai Pulai estuary, Malaysia, using Landsat data (1994-2017). International Journal of Remote Sensing, 40 (9). pp. 3571-3605. ISSN 0143-1161

Hossain, Mohammad Shawkat and Hashim, Mazlan (2019) Potential of earth observation (EO) technologies for seagrass ecosystem service assessments. International Journal of Applied Earth Observation and Geoinformation, 77 . pp. 15-29. ISSN 1569-8432

Huseien, Ghasan Fahim and Mohd. Sam, Abdul Rahman and Kwok Wei, Shah and Asaad, Mohammad Ali and Md. Tahir, Mahmood and Mirza, Jahangir (2019) Properties of ceramic tile waste based alkali-activated mortars incorporating gbfs and fly ash. Construction and Building Materials, 214 . pp. 355-368. ISSN 0950-0618

Huseien, Ghasan Fahim and Mohd. Sam, Abdul Rahman and Shah, Kwok Wei and Budiea, A. M. A. and Mirza, Jahangir (2019) Utilizing spend garnets as sand replacement in alkali-activated mortars containing fly ash and GBFS. Construction and Building Materials, 225 . pp. 132-145. ISSN 0950-0618

Huseien, Ghasan Fahim and Mohd. Sam, Abdul Rahman and Shah, Kwok Wei and Mirza, Jahangir and Md.Tahir, Mahmood (2019) Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing gbfs. Construction and Building Materials, 210 . pp. 78-92. ISSN 0950-0618

Huseien, Ghasan Fahim and Shah, Kwok Wei and Mohd. Sam, Abdul Rahman (2019) Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight. Journal of Building Engineering, 23 . pp. 155-171. ISSN 2352-7102

I

Iqbal, Zafar and Shahid, Shamsuddin and Ahmed, Kamal and Ismail, Termizi and Nawaz, Nadeem (2019) Spatial distribution of the trends in precipitation and precipitation extremes in the sub-Himalayan region of Pakistan. Theoretical and Applied Climatology, 137 (3-4). pp. 2755-2769. ISSN 0177-798X

Ibrahim, Izzuain (2019) Building condition assessment on Datin Seri Endon residential college. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ibrahim, N. and Yunus, M. Z. M. (2019) Bridge monitoring and management system using GIS. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Idham, M. K. and Hainin, M. R. and Yaacob, H. and Warid, M. N. M. and Puan, O. C. and Hassan, N. A. and Mohamed, A. and Mudiyono, R. (2019) Repeatability of reclaimed asphalt pavement as related to properties of bitumen. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 201, 15-16 Oct 2018, Palembang, Indonesia.

Idham, M. K. and Jeffry, S. N. A. and Hainin, M. R. and Yaacob, H. and Hassan, N. A. and Warid, M. N. M. and Mohamed, A. and Yunus, N. Z. M. (2019) Effect of different rejuvenating agents on the mechanical performance of recycled bituminous mixture. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ishak, Rozelawati (2019) Sustainability criteria for road maintenance work in Malaysia using pHJKR rating tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishanch, Qutbudin (2019) Seasonal drought pattern changes due to climate variability in Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Islam, S. and Abdullah, R. A. B. and Hirol, H. and Mallick, J. and Khan, R. A. (2019) Performance evaluation of mass transfer-based method using global performance index in semi-arid region Saudi Arabia. Applied Ecology and Environmental Research, 17 (5). pp. 11121-11141. ISSN 1785-0037

Islam, Saiful and Abdullah, Rini Asnida and Algahtani, Ali and Irshad, Kashif and Hirol, H. (2019) Performance of vapour pressure models in the computation of vapour pressure and evapotranspiration in ABHA, ASIR region, Saudi Arabia. Applied Ecology and Environmental Research, 17 (4). pp. 9691-9715. ISSN 1589-1623

Ismail, Afiqah (2019) Crack detection on retaining wall by using thermal camera and image processing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismail, Norazila (2019) Improvement to constructor quality delivery by qlassic intergration into iso 9001 work process. Masters thesis, Universiti Teknologi Malaysia.

Ismail, R. and Ibrahim, A. and Rusop, M. and Adnan, A. (2019) Dynamic mechanical properties of natural rubber vulcanizates with different carbon nanotubes-loaded. In: 9th International Conference on Nanoscience and Nanotechnology 2018, 26 Feb - 1 March 2018, Selangor, Malaysia.

Ismail, S. and Hassan, N. A. and Yaacob, H. and Warid, M. N. M. and Mashros, N. and Mohamed, A. and Hassan, S. A. and Azahar, N. M. (2019) Effect of rainfall on the compaction of dense-graded hot mix asphalt. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ismail, S. and Taib, A. M. and Rahman, N. A. (2019) Slope stability of landfill with waste degradation. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 393-398. ISSN 2278-3075

Ismail, Sharudin and Abdul Hassan, Norhidayah and Yaacob, Haryati and Hainin, Mohd. Rosli and Ismail, Che Ros and Mohamed, Azman and Mohd. Satar, Mohd. Khairul Idham (2019) Properties of dense-graded asphalt mixture compacted at different temperatures. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

J

Jwasshaka, S. K. and Mohd. Amin, N. F. (2019) Enhancing self-reliant of students in technical and vocational skills through work-based learning for 4th industrial revolution; review of Nigerian. International Journal of Recent Technology and Engineering, 8 (1C2). pp. 594-598. ISSN 2277-3878

Jamal, Muhammad Adib (2019) The management of industrialized building systems (ibs) projects using radio-frequency identification (rfid) technology. Masters thesis, Universiti Teknologi Malaysia.

Jamri, Heirlina Mawarni (2019) Estimation of debris flow sedimentation volume through numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Jasman, Nursyiqah (2019) Correlation between uniaxial compressive strength and point load strength index of granite sample. Masters thesis, Universiti Teknologi Malaysia.

Jaya, R. P. and Awang, H. and Mazme S., N. A. and M. S., M. K. I. and Yaacob, H. and Hainin, M. R. and A. H., N. and W. M., M. N. and Hamid, A. R. A. and M. H., M. R. (2019) Performance of asphalt mixture incorporating kaolin clay at different aging. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018;, 27-28 Aug 2018, Johor, Malaysia.

Jaya, R. P. and Che'Mat, N. and Hassan, N. A. and Mashros, N. and Yaacob, H. and Hainin, M. R. and Satar, M. K. I. M. and Ali, M. I. (2019) Effects of nano-kaolin clay on the rutting resistance of asphalt binder. In: 9th International Conference on Nanoscience and Nanotechnology 2018, NANO-SciTech 2018, 26 Feb - 1 March 2018, Selangor, Malaysia.

Jaya, R. P. and Idris, A. M. and Mohd. Ibrahim, M. Y. and Hainin, M. R. and Yaacob, H. and Hassan, N. A. and Mohd. Haziman, W. I. and Ekarizan, S. (2019) Flexural strength properties of porous concrete pavement incorporating nano black rice husk ash. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Jaya, R. P. and Masri, K. A. and Ali, M. I. and Wan Azahar, W. N. A. and Shaffie, E. and Hainin, M. R. and Abdul Hassan, N. and Yaacob, H. (2019) Voids characteristic of hot mix asphalt containing waste cooking oil. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Jaya, R. P. and Noor Azlan, A. and Haryati, Y. and Mohd. Rosli, H. and A.H., N. and M. S., M. K. I. and Hamid, A. R. A. and M. Azman, M. and Mashros, N. and S., E. (2019) Effects of black rice husk ash on asphalt mixture under aging condition. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Jaya, R. P. and Ramli, N. I. and Ali, M. I. and Abdullah, M. E. and A. B., S. K. and Abdul Hassan, N. and Yaacob, H. (2019) Stability and voids properties of hot mix asphalt containing black rice husk ash. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Jaya, R. P. and Yaacob, H. and Hassan, N. A. and Hainin, M.R. and Mohd. Warid, M. N. and Mohamed, A. and Abd. Hamid, A. R. and Shaffie, E. (2019) Creep and resilient modulus properties of asphaltic concrete containing black rice husk ash. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

K

Khan, Najeebullah and Shahid, Shamsuddin and Ismail, Tarmizi and Wang, Xiao Jun (2019) Spatial distribution of unidirectional trends in temperature and temperature extremes in Pakistan. Theoretical and Applied Climatology, 136 (3-4). pp. 899-913. ISSN 0177-798X

Khan, Najeebullah and Pour, Sahar Hadi and Shahid, Shamsuddin and Ismail, Tarmizi and Ahmed, Kamal and Chung, Eun Sung and Nawaz, Nadeem and Wang, Xiaojun (2019) Spatial distribution of secular trends in rainfall indices of Peninsular Malaysia in the presence of long‐term persistence. Meteorological Applications, 26 (4). pp. 655-670. ISSN 1350-4827

Kamarrudin, Alia (2019) Critical success factors and barriers of implementing lean manufacturing in precast industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Kamarudin, N. A. S. and Mohamed, A. and Nor, H. M. and Khalid, N. H. A. and Sam, A. R. M. and Hainin, M. R. and Yaacob, H. and Idham, M. K. and Hassan, S. A. (2019) Effects of u-shaped subgrade concrete panel on subgrade deformation. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Kamarudin, N. A.S. and Kamarudin, A. and Nor, H. M. and Hainin, M. R. and Khalid, N. H. A. and Mohd. Satar, M. K. I. (2019) Experimental investigation of flexural behaviour of u-shaped concrete subgrade panel. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Kar, Sing Lim and Azraai, Siti Nur Afifah and Yahaya, Nordin and Md. Noor, Norhazilan and Zardasti, Libriati and Kim, Jang Ho Jay (2019) Behaviour of steel pipelines with composite repairs analysed using experimental and numerical approaches. Thin-Walled Structures, 139 . pp. 321-333. ISSN 0263-8231

Kassim, A. and Mustaffar, M. and Rasid, A. S. A. and Osman, M. H. and Syahrizal, I. I. and Vafaei, M. and Mohd. Ariffin, M. A. and Alih, S. C. and Abdullah, R. A. and Sa'ari, R. and Hezmi, M. H. and Alel, M. N. A. and M. A, Mohd For and Tahir, S. N. and A. R., Afif and Kamisan, K. Z. and Haron, H. H. and Zulkifly, A. W. and Ismail, D. S. A. and M. A. R., Muhammad Fatih (2019) Load-deformation analysis on a slope at Gunung Pulai water treatment plant, Sultan Ibrahim reservoir. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Khairul Anuar, Mohamad Amir Syafiq (2019) Selection factor to bid or not to bid for extra low voltage system (ELV) project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Khairul Anuar, Safinaz (2019) Fibre optic sensing monitoring system for pile on slope. Masters thesis, Universiti Teknologi Malaysia.

Khan, Adil (2019) Ground improvement for ring beam tank foundation compared between vibro replacement against combination of dynamic techniques with numerical models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Khan, Jam Shahzaib and Zakaria, Rozana and Aminudin, Eeydzah and Abidin, Nur Izie Adiana and Mahyuddin, Mohd. Affifuddin and Ahmad, Rosli (2019) Embedded life cycle costing elements in green building rating tool. Civil Engineering Journal, 5 (4). pp. 750-758. ISSN 2476-3055

Khan, Jam Shahzaib and Zakaria, Rozana and Shamsudin, Siti Mazzuana and Abidin, Nur Izie Adiana and Sahamir, Shaza Rina and Abbas, Darul Nafis and Aminudin, Eeydzah (2019) Evolution to emergence of green buildings: A review. Administrative Science, 9 (1). p. 6. ISSN 2076-3387

Khan, Najeebullah and Shahid, Shamsuddin and Chung, Eun Sung and Kim, Sungkon and Ali, Rawshan (2019) Influence of surface water bodies on the land surface temperature of Bangladesh. Sustainability (Switzerland), 11 (23). p. 6754. ISSN 2071-1050

Khan, Najeebullah and Shahid, Shamsuddin and Ismail, Tarmizi and Ahmed, Kamal and Nawaz, Nadeem (2019) Trends in heat wave related indices in Pakistan. Stochastic Environmental Research and Risk Assessment, 33 (1). pp. 287-302. ISSN 1436-3240

Khan, Najeebullah and Shahid, Shamsuddin and Juneng, Liew and Ahmed, Kamal and Ismail, Tarmizi and Nawaz, Nadeem (2019) Prediction of heat waves in Pakistan using quantile regression forests. Atmospheric Research, 221 . pp. 1-11. ISSN 0169-8095

Khiyon, M. I. and Kadir, M. A. A. and Mohd. Sam, A. R. (2019) The effect of concrete cover thickness subjected to elevated temperatures. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Kiflee, A. K. R. and Ali Khan, M. N. A. and Bosi, M. K. (2019) Scientific publication analysis: financial reporting quality insight. Page 1 International Journal of Recent Technology and Engineering (IJRTE), 8 (4). ISSN 2277-3878

Koopialipoor, Mohammadreza and Fallah, Ali and Armaghani, Danial Jahed and Azizi, Aydin and Mohamad, Edy Tonnizam (2019) Three hybrid intelligent models in estimating flyrock distance resulting from blasting. Engineering with Computers, 35 (1). pp. 243-256. ISSN 0177-0667

Koopialipoor, Mohammadreza and Ghaleini, Ebrahim Noroozi and Haghighi, Mojtaba and Kanagarajan, Sujith and Maarefvand, Parviz and Mohamad, Edy Tonnizam (2019) Overbreak prediction and optimization in tunnel using neural network and bee colony techniques. Engineering with Computers, 35 (4). pp. 1191-1202. ISSN 0177-0667

Krishnan, Santhana and Md. Din, Mohd. Fadhil and Mat Taib, Shazwin and Kamaludin, Norfarah Hanim and Hanafi, Norhisyam and Ida, Tamio and Shamsuddin, Mohd. Suhaizan and Chelliapan, Shreeshivadasan (2019) Conversion of landscapewaste into bio-coke solid fuel. In: Green Engineering for Campus Sustainability. NA, NA (NA). Springer, Singapore, NA, pp. 105-118. ISBN 978-981-13-7259-9

Krishnan, Santhana and Md. Din, Mohd. Fadhil and Mat Taib, Shazwin and Nasrullah, Mohd. and Mimi Sakinah, Mimi Sakinah and A. Wahid, Zularisam and Kamyab, Hesam and Chelliapan, Shreeshivadasan and Rezania, Shahabaldin and Singh, Lakhveer (2019) Accelerated two-stage bioprocess for hydrogen and methane production from palm oil mill effluent using continuous stirred tank reactor and microbial electrolysis cell. Journal of Cleaner Production, 229 . pp. 84-93. ISSN 0959-6526

Kusni @ Sulikan, Hasliana (2019) Organizational talent management initiatives and practices in construction industry. Masters thesis, Universiti Teknologi Malaysia.

L

Lat, D. C. and Jais, I. B. M. and Ali, N. and Baharom, B. and Mohd. Yunus, N. Z. and Mat Yusof, D. A. (2019) Uplift and settlement prediction model of marine clay soil e integrated with polyurethane foam. Open Engineering, 9 (1). pp. 481-489. ISSN 2391-5439

Lau, S. E. N. and Zakaria, R. and Aminudin, E. and Chang, S. C. and Abidin, N. I. A. and Roslan, A. F. and Abd. Hamid, Z. and Mohd. Zain, M. Z. and Lou, E. (2019) Review: Identification of roadmap of fourth construction industrial revolution. In: 7th International Conference on Euro Asia Civil Engineering Forum, EACEF 2019, 30 Sep - 2 Oct 2019, Stuttgart, Germany.

Lavania Baloo, Lavania Baloo and Azman, Shamila and Mohd. Said, Mohd. Ismid and Mawi, Saberi (2019) Inorganic carbon acquisition by Gracilaria edulis and its effect on growth. Environmental Engineering and Management Journal, 18 (2). pp. 283-289. ISSN 1582-9596

Li, Diyuan and Toghroli, Ali and Shariati, Mahdi and Sajedi, Fathollah and Dieu, Tien Bui and Kianmehr, Peiman and Mohamad, Edy Tonnizam and Khorami, Majid (2019) Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete. Smart Structures and Systems, 23 (2). pp. 207-214. ISSN 1738-1584

Liew, Chia Pao (2019) A sustainable framework for assessing the engineering accreditation council’s programme outcomes. PhD thesis, Universiti Teknologi Malaysia.

Lim, A. H. A. S. and Ismail, Z. and Jamal, M. H. and Jumain, M. (2019) Depth-averaged modelling of vegetated meandering compound channel. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Lim, W. M. and Rahman, R. A. and Hassin, M. F. and Md. Diah, J. and Mashros, N. and Abdullah, M. E. and Masirin, M. I. (2019) An overview of the practice of traffic impact assessment in Malaysia. International Journal of Engineering and Advanced Technology, 8 (5). pp. 914-921. ISSN 2249-8958

Ling, P. C. H. and Tan, C. S. and Saggaff, A. (2019) Feasibility of ISO shipping container as transitional shelter a review. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Loh, Seng Yap (2019) Key factors affecting the adaptation of prefabricated prefinished volumetric construction (PPVC) in Malaysia industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Luke, Sarah H. and Slade, Eleanor M. and Gray, Claudia L. and Annammala, Kogila V. and Drewer, Julia and Williamson, Joseph and Agama, Agnes L. and Ationg, Miklin and Mitchell, Simon L. and Vairappan, Charles S. and Struebig, Matthew J. (2019) Riparian buffers in tropical agriculture: scientific support, effectiveness and directions for policy. Journal of Applied Ecology, 56 (1). pp. 85-92. ISSN 0021-8901

Luo, Zhenyan and Sinaei, Hamid and Ibrahim, Zainah and Shariati, Mahdi and Jumaat, Zamin and Wakil, Karzan and Pham, Binh Thai and Mohamad, Edy Tonnizam and Khorami, Majid (2019) Computational and experimental analysis of beam to column joints reinforced with CFRP plates. Steel and Composite Structures, 30 (3). pp. 271-280. ISSN 1229-9367

Luxman, N. N. and Hassan, N. A. and Jaya, R. P. and Warid, M. N. M. and Azahar, N. M. and Mahmud, M. Z. H. and Ismail, S. (2019) Effect of compaction temperature on porous asphalt performance. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

M

Ma, Chau-Khun and Sulaiman, Muhd. Fauzy and Apandi, Nazirah and Awang, Abdullah Zawawi and Omar, Wahid and Jaw, Siow Wei (2019) Ductility and stiffness of slender confined reinforced high-strength concrete columns under monotonic axial load. Measurement: Journal of the International Measurement Confederation, 146 . pp. 838-845. ISSN 0263-2241

M. Noor, Z. A. and Hainin, M. R. and Idham, M. K. and Warid, M. N. M. and Naqibah, S. N. (2019) Relationship between rutting, roughness and resilient modulus of flexible expressway pavement. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

M. S., Maziah Munirah and Libriati, Z. and Nordin, Y. and Norhazilan, M. N. (2019) Prioritization of the human health and safety loss factor subject to offshore pipeline accidents. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 - 28 August 2018, Johor, Malaysia.

M. Saeed, Aseel Abdulhaleem (2019) Condition assessment of reinforced concrete : bridge structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Maha, Raihana Rozan (2019) Microplastic contamination in green mussel aquaculture at straits of Johor. Masters thesis, Universiti Teknologi Malaysia.

Mahdiyar, Amir and Tabatabaee, Sanaz and Durdyev, Serdar and Ismail, Syuhaida and Abdullah, Arham and Wan Mohd. Rani, Wan Nurul Mardiah (2019) A prototype decision support system for green roof type selection: a cybernetic fuzzy anp method. Sustainable Cities and Society, 48 . ISSN 2210-6707

Mahmad Raseh, Nur Balqis Idayu (2019) Mechanical properties of concrete incorporating spent abrasive waste. Masters thesis, Universiti Teknologi Malaysia.

Mahmood @ Mohd. Zawawi, Aidil (2019) A comparative study of Malaysian expressway traffic management with selected countries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mahmud, Nazriah and Yahya, Azli and Supriyanto, Eko (2019) Flyback converter of electrical discharge machining power supply: application to surface texturing. International Journal of Mechanical Engineering, 4 . pp. 4-8. ISSN 2367-8968

Mahssin, Zakariya Y and Abdul Hassan, Norhidayah and Yaacob, Haryati and Puteh, Mohd. Hafiz and Saidina Amin, Nor Aishah and Mohammad Zainol, Muzakkir and Hainin, Mohd. Rosli (2019) Characterization of asphalt binder containing hydrothermal liquefied composition extracted from food waste. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Mairizal, Mairizal and Edrizal, Edrizal and Ismail, M. and Mohamad Zin, R. (2019) Identifying occurrences of accident at work place in terms of occupational safety on roads and bridges infrastructure in Indonesia. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Majain, N. and Rahman, A. B. A. and Mohamed, R. N. and Adnan, A. (2019) Effect of steel fibers on self-compacting concrete slump flow and compressive strength. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Mansor, S. and Mohamed, R. N. and Ahmad Shukri, N. and Mahmoor, M. S. N. and Azillah, N. and Zamri, F. (2019) Overview on the theoretical prediction of shear resistance of steel fibre in reinforced concrete beams. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Marwan, H. and Hainin, M. R. and Warid, M. N. M. and Idham, M. K. and Naqibah, S. N. (2019) Evaluation of vehicle overloading along Muar-Melaka road. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Mashros, N. and Wan Azahar, W. N. A. and Hainin, M. R. and Mohd. Warid, M. N. and Abdul Hassan, N. and Yaacob, H. and Ahmad, J. and Putra Jaya, R. (2019) Rutting resistance of untreated and treated waste cooking oil in bitumen after aging condition. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Mat Said, Khairun Nissa and A. Rashid, Ahmad Safuan and Ng, Kok Shien and Mohd. Yunus, Nor Zurairahetty (2019) Load transfer mechanism of group of floating soil-cement column in mproving soft ground. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 - 28 August 2018, Johor, Malaysia.

Mat Said, Khairun Nissa and A. Rashid, Ahmad Safuan and Osouli, Abdolreza and Latifi, Nima and Mohd. Yunus, Nor Zurairahetty and Ganiyu, Abideen Adekunle (2019) Settlement evaluation of soft soil improved by floating soil cement column. International Journal of Geomechanics, 19 (1). ISSN 1532-3641

Mawi, Saberi (2019) Bioremediation of shrimp pond effluent using outdoor seaweed recirculating culture system. PhD thesis, Universiti Teknologi Malaysia.

Mazlan, D. and Krishnan, S. and Md. Din, M. F. and Tokoro, C. and Abd. Khalid, N. H. and Ibrahim, I. S. and Takahashi, H. and Komori, D. (2019) Effect of cellulose nanocrystals extracted from oil palm empty fruit bunch as green admixture for mortar. Scientific Reports, 10 (1). ISSN 2045-2322

Md. Lani, Nor Hafizi and Syafiuddin, Achmad and Yusop, Zulkifli (2019) Comparison of cost benefits of new installation and retrofitted rainwater harvesting systems for commercial buildings. In: 11th International Conference on Urban Drainage Modelling, UDM 2018, 23 - 26 September 2018, Palermo, Italy.

Md. Lani, Nor Hafizi and Syafiuddin, Achmad and Yusop, Zulkifli (2019) Comparison of cost benefits of new installation and retrofitted rainwater harvesting systems for commercial buildings. In: New Trends in Urban Drainage Modelling. Green Energy and Technology, NA (NA). Springer, NA, pp. 169-174. ISBN 978-331999866-4

Md. Tahir, Mahmood and Mohammadhosseini, Hossein and Alyousef, Rayed and Wong, Kah Leong and Salih, Musab N. A. (2019) Performance evaluation of pre-fabricated footing using cold-formed steel of lipped C-channel section. Arabian Journal for Science and Engineering, 44 (10). pp. 8225-8238. ISSN 2193-567X

Md. Yusoff, Nur Izzi and Alhamali, Dhawo Ibrahim and Ibrahim, Ahmad Nazrul Hakimi and Rosyidi, Sri Atmaja P. and Abdul Hassan, Norhidayah (2019) Engineering characteristics of nanosilica/polymer-modified bitumen and predicting their rheological properties using multilayer perceptron neural network model. Construction and Building Materials, 204 . pp. 781-799. ISSN 0950-0618

Mhaya, A. M. and Abidin, A. R. Z. and Sarbini, N. N. and Ismail, M. (2019) Role of crumb tyre aggregates in rubberised concrete contained granulated blast-furnace slag. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Moayedi, Hossein and Kalantar, Bahareh and Abdullahi, Mu’azu Mohammed and A. Rashid, Ahmad Safuan and Nazir, Ramli and Nguyen, Hoang (2019) Determination of young elasticity modulus in bored piles through the global strain extensometer sensors and real-time monitoring data. Applied Sciences (Switzerland), 9 (15). p. 3060. ISSN 2076-3417

Moayedi, Hossein and Mehrabi, Mohammad and Mosallanezhad, Mansour and A. Rashid, Ahmad Safuan and Pradhan, Biswajeet (2019) Modification of landslide susceptibility mapping using optimized PSO-ANN technique. Engineering with Computers, 35 (3). pp. 967-984. ISSN 0177-0667

Moayedi, Hossein and Mohammad Mehrabi, Mohammad Mehrabi and Kalantar, Bahareh and Mu’azu, Mohammed Abdullahi and Foong, Loke Kok and A. Rashid, Ahmad Safuan and Nguyen, Hoang (2019) Novel hybrids of adaptive neuro-fuzzy inference system (ANFIS) with several metaheuristic algorithms for spatial susceptibility assessment of seismic-induced landslide. Geomatics, Natural Hazards and Risk, 10 (1). pp. 1879-1911. ISSN 1947-5705

Mohamad, Darwish and Azmi, Aris and Puteh, Mohd. Hafiz and Abdul Kadir, Aeslina (2019) Study on the effect of potassium on struvite precipitation in synthetic landfill leachate. Asian Journal of Water, Environment and Pollution, 16 (4). pp. 77-80. ISSN 0972-9860

Mohamad, E. T. and Koopialipoor, M. and Murlidhar, B. R. and Rashiddel, A. and Hedayat, A. and Jahed Armaghani, D. (2019) A new hybrid method for predicting ripping production in different weathering zones through in situ tests. Measurement: Journal of the International Measurement Confederation, 147 . ISSN 0263-2241

Mohamad, E. T. and Li, D. and Murlidhar, B. R. and Armaghani, D. J. and Kassim, K. A. and Komoo, I. (2019) The effects of ABC, ICA, and PSO optimization techniques on prediction of ripping production. Engineering with Computers, 36 (4). pp. 1355-1370. ISSN 0177-0667

Mohamad, H. and Tee, B. P. and Chong, M. F. and Ang, K. A. and Rashid, A. S. A. and Abdullah, R. A. (2019) Instrumented laterally loaded pile test using distributed fibre optic sensor. Geotechnical Engineering, 50 (2). pp. 36-42. ISSN 0046-5828

Mohamad, I. I. and Mohd. Yunus, M. Z. and Harith, N. S. H. (2019) Assessment of building vulnerability by integrating rapid visual screening and geographic information system: a case study of Ranau township. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Mohamad, Izni Izzati and Mohd. Yunus, Mohd. Zulkifli and Harith, Noor Sheena Herayani and Lestuzzi, Pierino (2019) Vulnerability assessment of buildings in Ranau township: Methodological design. Jurnal Kejuruteraan SI, 2 (1). pp. 1-7. ISSN 0128-0198

Mohamad Hanafi, Muhammad Arif Haikal (2019) Qualitative screening of pharmaceuticals and personal care products in water and farm green mussels at straits of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamad Noor, Athirah Afiqah (2019) Keupayaan pengurangan kebisingan konkrit berliang menggunakan cangkerang kelapa sawit sebagai gantian agregat bagi pembinaan penghalang kebisingan lebuh raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamad Talib, Siti Bazura (2019) Comparison method of segmental box girder (SBG) erection using launching gantry and trestle in MRT project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamed, R. N. and Zamri, N. F. and Elliott, K. S. and Rahman, A. B. A. and Bakhary, N. (2019) Steel fibre self-compacting concrete under biaxial loading. Construction and Building Materials, 224 . pp. 255-265. ISSN 0950-0618

Mohamed, Roslan (2019) Assessment of willingness to accept upgrading water supply system for rural indigenous settlement. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Abdeen, Abdullah Adelhttp://dms.library.utm.my:8080/vital/access/manager (2019) On-line recognition of developing control chart patterns performance of concrete pavement containing coal bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamed Ahmad, F. H. and Jamal, M. H. and Mohd. Sam, A. R. (2019) Green technology and sustainable urban drainage systems using ecocomposite porous concrete: a preliminary study. In: 12th International Civil Engineering Post Graduate Conference (SEPKA), The 3rd International Symposium on Expertise of Engineering Design (ISEED), 27-28 Aug 2018, Johor, Malaysia.

Mohamed Bazin, Maisarah and Ahmad, Norhayati and Nakamura, Yuzo (2019) Preparation of porous ceramic membranes from Sayong ball clay. Journal of Asian Ceramic Societies, 7 (4). pp. 417-425. ISSN 2187-0764

Mohamed Radzi, Ridzuan (2019) Assessment of carbon footprints in road operation and maintenance activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, Shahrin and Tan, Cher Siang and Osman, Sharifah and Jamaluddin, Nurdiana Yasmin and Mohamed Alfu, Nur Afiqah and Lee, Yeong Huei (2019) A proposed heutagogy framework for structural steel design in civil engineering curriculum. International Journal of Emerging Technologies in Learning, 14 (24). pp. 96-105. ISSN 1868-8799

Mohammad, Toaha (2019) Development of an image processing model for the measurement of vibrations in structural elements by matlab and smartphone digital camera. Masters thesis, Universiti Teknologi Malaysia.

Mohammadhosseini, Hossein and Abdul Shukor Lim, Nor Hasanah and Md. Tahir, Mahmood and Alyousef, Rayed and Alabduljabbar, Hisham and Samadi, Mostafa (2019) Enhanced performance of green mortar comprising high volume of ceramic waste in aggressive environments. Construction and Building Materials, 212 . pp. 607-617. ISSN 0950-0618

Mohammadhosseini, Hossein and Abdul Shukor Lim, Nor Hasanah and Md. Tahir, Mahmood and Alyousef, Rayed and Samadi, Mostafa (2019) Performance evaluation of green mortar comprising ceramic waste as cement and fine aggregates replacement. SN Applied Sciences, 1 (6). ISSN 2523-3963

Mohammed Hatem, Zaid (2019) Management and maintenance of the welfare facilities at construction sites in Iraq. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammed Younis, Ibrahim (2019) Cost benefit analysis of photovoltaic technology adoption at rest and service area for Malaysia Highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Apandi, Nazirah (2019) Structural performance of repaired circular reinforced concrete columns using steel strapping tensioning technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Asharuddin, Syazwani and Othman, Norzila and Mohd. Zin, Nur Shaylinda and Tajarudin, Husnul Azan and Md. Din, Mohd. Fadhil (2019) Flocculation and antibacterial performance of dual coagulant system of modified cassava peel starch and alum. Journal of Water Process Engineering, 31 . p. 100888. ISSN 2214-7144

Mohd. Azahar, Norfazira and Abdul Hassan, Norhidayah and Putra Jaya, Ramadhansyah and Md. Nor, Hasanan and Mohd. Satar, Mohd. Khairul Idham and Mashros, Nordiana and Mohamed, Azman (2019) Mechanical performance of asphalt mixture containing cup lump rubber. Jurnal Teknologi, 81 (6). pp. 179-185. ISSN 2180-3722

Mohd. Azahar, Norfazira and Abdul Hassan, Norhidayah and Putrajaya, Ramadhansyah and Hainin, Mohd. Rosli and Che Puan, Othman and Mohd. Shukry, Nurul Athma and Hezmi, Muhammad Azril (2019) Engineering properties of asphalt binder modified with cup lump rubber. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Mohd. Hasan, Mohd. Rosli and Zhanping, You and Mohd. Satar, Mohd. Khairul Idham and Mohd. Warid, Muhammad Naqiuddin and Mohd. Kamaruddin, Nurul Hidayah and Poovaneshvaran, Sharvin (2019) Rheological and mechanical performance of asphalt binders and mixtures incorporating CaCO3 and LLDPE. Organic Polymer Material Research, 1 (1). pp. 10-21. ISSN 2661-3875

Mohd. Muhtar, N. I. S. and Jusoh, S. N. and Yusufiansyah, D. and Alel, A. and Mohd. Yunus, N. Z. and Abdullah, R. A. and Mashros, N. (2019) Assessment on tunnel lining to ensure stability in soft ground. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Mohd. Najib, Abdillah Sani and Saud, Safaa and Hamzah, Esah (2019) Corrosion behavior of Cu-Al-Ni-xCo shape memory alloys coupled with low-carbon steel for civil engineering applications. Journal of Bio- and Tribo-Corrosion, 5 (47). NA. ISSN 2198-4220

Mohd. Sam, A. R. and Al-Ghaifi, H. A. A. and Ahmad Norain, A. M. and Abu Bakar, S. and Tahir, M. M. and Abd. Khalid, N. H. and Mohamed, A. and Basar, N. (2019) Effectiveness of tropical soil bacteria as self-healing agent in concrete. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Mohd. Sam, A. R. and Khanom, F. and Kamaruzzaman, M. and Md. Tahir, M. and Abdul Shukur Lim, N. H. and Awang, A. Z. and Ismail, A. (2019) Fresh and hardened properties of concrete containing effective microorganisms. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 - 28 August 2018, Johor, Malaysia.

Mohd. Shukri, Muhamad Shardiq (2019) Self-healing geopolymer mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Taib, Aizat and Taha, Mohd. Raihan and Abang Hasbollah, Dayang Zulaika (2019) Influence of initial conditions on unsaturated groundwater flow models. International Journal of Engineering & Technology, 8 (1.2). pp. 34-40. ISSN 2227-524X

Mohd. Yunus, N. Z. and Ayub, A. and Wahid, M. A. and Mohd. Satar, M. K. I. and Abudllah, R. A. and Yaacob, H. and Hassan, S. A. and Hezmi, M. A. (2019) Strength behaviour of kaolin treated by demolished concrete materials. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Mohd. Zainudin, Arif (2019) Unethical conduct and corruption among Malaysian construction professional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohsenipour, M. and Shahid, S. and Ebrahimi, K. and Ismail, T. and Wang, X. J. (2019) Simulation of nitrate transport and fate in groundwater in presence of kaolin. Journal of Soil and Water Conservation, 74 (1). pp. 67-76. ISSN 0022-4561

Momade, Mohammed Hamza and Hainin, M. R. (2019) Identifying motivational and demotivational productivity factors in Qatar construction projects. Engineering, Technology and Applied Science Research, 9 (2). pp. 3945-3948. ISSN 1792-8036

Moosazadeh, S. and Namazi, E. and Aghababaei, H. and Marto, A. and Mohamad, H. and Hassani, M. (2019) Prediction of building damage induced by tunnelling through an optimized artificial neural network. Engineering with Computers, 35 (2). pp. 579-591. ISSN 0177-0667

Moradi, Razieh and Marto, Aminaton and A. Rashid, Ahmad Safuan and Moradi, Mohammad Moeen and Ganiyu, Abideen Adekunle and Abdullah, Mohamad Hafeezi and Horpibulsuk, Suksun (2019) Enhancement of soft soil behaviour by using floating bottom ash columns. KSCE Journal of Civil Engineering, 23 (6). pp. 2453-2462. ISSN 1226-7988

Moravej, Hossein and Vafaei, Mohammadreza (2019) Seismic performance evaluation of an ATC tower through pushover analysis. Structural Engineering International, 29 (1). pp. 144-149. ISSN 1016-8664

Mst. Kaniz Fatema, Mst. Kaniz Fatema (2019) Water quality assessment and trophic state classification of Tasik Ilmu, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muhammad, Mohd. Khairul Idlan and Nashwan, Mohamed Salem and Shahid, Shamsuddin and Ismail, Tarmizi and Song, Young Hoon and Chung, Eun Sung (2019) Evaluation of empirical reference evapotranspiration models using compromise programming: A case study of Peninsular Malaysia. Sustainability (Switzerland), 11 (16). p. 4267. ISSN 2071-1050

Muhammad Arfat, Muhammad Arfat (2019) Reversible moisture damage in asphalt mixture. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Bilal, Muhammad Bilal (2019) Finite element modelling of crumb rubber concrete column subjected to earthquakes. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Noor, Muhammad Noor and Ismail, Tarmizi and Shahid, Shamsuddin and Nashwan, Mohamed Salem and Ullah, Shahid (2019) Development of multi-model ensemble for projection of extreme rainfall events in Peninsular Malaysia. Hydrology Research, 50 (6). pp. 1772-1788. ISSN 19989563

Muhammed, A. S. and Zango, M. U. and Kassim, K. A. and Ahmad, K. and Umar, M. (2019) Effects of cementation reagent on the precipitation of calcium carbonate induced by bacillus megaterium. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Murlidhar, Bhatawdekar Ramesh and Ahmed, Munir and Mavaluru, Dinesh and Siddiqi, Ahmed Faisal and Mohamad, Edy Tonnizam (2019) Prediction of rock interlocking by developing two hybrid models based on GA and fuzzy system. Engineering with Computers, 35 (4). pp. 1419-1430. ISSN 0177-0667

Musa, S. and Ibrahim, R. and Zainal, M. S. and Radin Mohamed, R. M. S. and Jamal, M. H. and Shahabudin, M. M. (2019) Brownification effects from surface water sources to intelligent rainwater harvesting system. International Journal of Integrated Engineering, 11 (8). pp. 313-319. ISSN 2229-838X

Musa, Sulaiman Ibrahim and Hashim, Mazlan and Md. Reba, Mohd. Nadzri (2019) Geospatial modelling of urban growth for sustainable development in the Niger Delta Region, Nigeria. International Journal of Remote Sensing, 40 (8). pp. 3076-3104. ISSN 0143-1161

Mustapha, Falmata Audu and Sulaiman, Arizu and Mohamed, Roslli Noor and Umara, S. A. (2019) The effect of fly ash and silica fume on self-compacting high-performance concrete. Materials Today: Proceedings, 39 . pp. 965-969. ISSN 2214-7853

N

Nashwan, Mohamed Salem and Shahid, Shamsuddin and Abd. Rahim, Norhan (2019) Unidirectional trends in annual and seasonal climate and extremes in Egypt. Theoretical and Applied Climatology, 136 (1-2). pp. 457-473. ISSN 0177-798X

Nabaei, Sina and Sharafati, Ahmad and Yaseen, Zaher Mundher and Shahid, Shamsuddin (2019) Copula based assessment of meteorological drought characteristics: Regional investigation of Iran. Agricultural and Forest Meteorology, 276-27 . p. 107611. ISSN 0168-1923

Nagarajan, Logeswaren (2019) Risk assessment practices in project scheduling to reduce potential delays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Naqibah, S. N. and Hainin, M. R. and Idham, M. K. and Warid, M. N. M. and Hassan, N. A. and Mohamed, A. and Puan, O. C. and Ismail, C. R. (2019) Performance of rutting, stripping and cracking of warm mix asphalt. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Nashwan, M. S. and Ismail, T. and Ahmed, K. (2019) Non-stationary analysis of extreme rainfall in Peninsular Malaysia. Journal of Sustainability Science and Management, 14 (3). pp. 17-34. ISSN 1823-8556

Nashwan, Mohamed Salem and Shahid, Shamsuddin (2019) Spatial distribution of unidirectional trends in climate and weather extremes in Nile river basin. Theoretical and Applied Climatology, 137 (1-2). pp. 1181-1199. ISSN 0177-798X

Nashwan, Mohamed Salem and Shahid, Shamsuddin and Chung, Eun Sung (2019) Development of high-resolution daily gridded temperature datasets for the central north region of Egypt. Scientific Data, 6 (1). p. 138. ISSN 2052-4463

Nashwan, Mohamed Salem and Shahid, Shamsuddin and Wang, Xiaojun (2019) Assessment of satellite-based precipitation measurement products over the hot desert climate of Egypt. Remote Sensing, 11 (5). pp. 1-18. ISSN 2072-4292

Nashwan, Mohamed Salem and Shahid, Shamsuddin and Wang, Xiaojun (2019) Uncertainty in estimated trends using gridded rainfall data: a case study of Bangladesh. Water (Switzerland), 11 (2). ISSN 2073-4441

Nasir, M. A. A. M. and Mashros, N. and Muslim, N. H. H. and Mohd., N. I. and Hassan, N. A. and Rohani, M. M. and Yunus, N. Z. M. and Sukor, N. S. A. (2019) Driving behaviour among civil engineering students: A case study at Universiti Teknologi Malaysia. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Nasrollahzadeh, Tahereh (2019) Guideline of lean critical success factors implementation in construction project. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Nazifa, T. H. and Uddin, A. S. M. S. and Islam, R. and Hadibarata, T. and Salmiati, Salmiati and Aris, A. (2019) Oil spill remediation by adsorption using two forms of activated carbon in marine environment. In: 1st IEEE International Conference on Computing, Electronics and Communications Engineering, iCCECE 2018, 16-17 AUg 2018, University of Essex Southend, United Kingdom.

Ng, Su Fen (2019) Distance insensitive concrete crack detection using convolutional neural network with controlled blurriness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Noor, Muhammad and Ismail, Tarmizi and Shahid, Shamsuddin and Ahmed, Kamal and Chung, Eun-Sung and Nawaz, Nadeem (2019) Selection of CMIP5 multi-model ensemble for the projection of spatial and temporal variability of rainfall in peninsular Malaysia. Theoretical and Applied Climatology, 138 (1-2). pp. 999-1012. ISSN 0177-798X

Noruzman, Ainul Haezah (2019) Performance of polymer modified concrete incorporating polyvinyl acetate waste. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

O

Okuda, Toshinori and Yamada, Toshiro and Hosaka, Tetsuro and Miyasaku, Naohiro and Hashim, Mazlan and Lau, Alivin Meng Shin and Saw, Leng Guan (2019) Canopy height recovery after selective logging in a lowland tropical rain forest. Forest Ecology and Management, 442 . pp. 117-123. ISSN 0378-1127

Omar, Ahmad Hanis and Toemen, Susilawati and Muda, Khalida and Sulaiman, Siti Fadziana (2019) Effect of static magnetic field on the efficiency of granular sludge development for pharmaceutical wastewater treatment. International Journal of Integrated Engineering, 11 (1). pp. 151-159. ISSN 2229-838X

Ong, Zhen Ling (2019) Capacity determination of intermodal container frame in resisting housing load. Masters thesis, Universiti Teknologi Malaysia.

Othman, A. and Sohaili, J. and Supian, N. S. (2019) A review: methodologies review of magnetic water treatment as green approach of water pipeline system. Pertanika Journal of Science and Technology, 27 (1). pp. 281-296. ISSN 0128-7680

Othman, Ilya K. and Jiang, Zhonglian and Baldock, Tom E. (2019) Influence of grain size on sediment transport during initial stages of horizontal dam break–type flows. Journal of Waterway, Port, Coastal and Ocean Engineering, 145 (3). 04019009-04019009. ISSN 0733-950X

Othman, Norasman (2019) Influence of seasonal hydrological variation on swash zone morphological changes. PhD thesis, Universiti Teknologi Malaysia.

P

Pabarja, Ali and Vafaei, Mohammadreza and C. Alih, Sophia and Md. Yatim, Mohd. Yazmil and Osman, Siti Aminah (2019) Experimental study on the efficiency of tuned liquid dampers for vibration mitigation of a vertically irregular structure. Mechanical Systems and Signal Processing, 114 . pp. 84-105. ISSN 0888-3270

Poltue, Theerapruet and Suddeepong, Apichat and Horpibulsuk, Suksun and Samingthong, Wisanukhorn and Arulrajah, Arul and A. Rashid, Ahmad Safuan (2019) Strength development of recycled concrete aggregate stabilized with fly ash-rice husk ash based geopolymer as pavement base material. Road Materials and Pavement Design, 21 (8). pp. 2344-2355. ISSN 1468-0629

Pour, Sahar Hadi and Abd. Wahab, Ahmad Khairi and Shahid, Shamsuddin and Wang, Xiaojun (2019) Spatial pattern of the unidirectional trends in thermal bioclimatic indicators in Iran. Sustainability (Switzerland), 11 (8). p. 2287. ISSN 2071-1050

Puan, O. C. and Hassan, Y. A. H. and Mashros, N. and Idham, M. K. and Hassan, N. A. and Warid, M. N. M. and Hainin, M. R. (2019) Transportation mode choice binary logit model: a case study for Johor Bahru city. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Puan, O. C. and Mohamed, A. and Idham, M. K. and Ismail, C. R. and Hainin, M. R. and Ahmad, M. S. A. and Mokhtar, A. (2019) Drivers behaviour on expressways: headway and speed relationships. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Pui, Yvonne (2019) Slope stability assesment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia.

Q

Qutbudin, Ishanch and Shiru, Mohammed Sanusi and Ahmad Sharafati, Ahmad Sharafati and Ahmed, Kamal and Al-Ansari, Nadhir and Yaseen, Zaher Mundher and Shahid, Shamsuddin and Wang, Xiaojun (2019) Seasonal drought pattern changes due to climate variability: Case study in Afghanistan. Water, 11 (5). p. 1096. ISSN 2073-4441

R

Rahim, N. S. A. and Zahir, M. A. and Wan Azman, W. N. and Ayyub, M. and Qureshi, M. I. (2019) Transformational leadership style towards the quality of service in forwarding activity. International Journal of Recent Technology and Engineering, 8 (1). pp. 411-414. ISSN 2277-3878

Rahmat, N. A. and Hassan, N. A. and Jaya, R. P. and Satar, M. K. I. M. and Azahar, N. M. and Ismail, S. and Hainin, M. R. (2019) Effect of compaction temperature on the performance of dense-graded asphalt mixture. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Rahmat, Normaizatulakmar (2019) A combined adsorption and ozonation process for removal of lindane in aqueous medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Raj, Dayalan Rainoo (2019) Sustainable assessment of operational non-tolled roads in Malaysia using pH JKR rating tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ramanathan, Karthigeyan (2019) Effects of quarry blasting towards the residential area at Kangkar Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ramli, I. and Hasnin, M. R. and Hassan, S. A. and Naqibah, S. N. (2019) Development of parking estimation on rest service area in Malaysia. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Ramli, M. R. and Zainon, N. Z. and Aminudin, E. and Hainin, M. R. and Zakaria, R. and Zin, R. M. and Abd. Majid, M. Z. and Yousif, O. S. and Wahid, C. M. F. H. C. and Neardey, M. (2019) Carbon footprint assessment at rest and service area of Malaysia highway. Chemical Engineering Transactions, 72 . ISSN 2283-9216

Ramli, Muhammad Rozaid (2019) Operational carbon emission and economic analysis of green technology implementation at rest and service area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rashid, S. A. and Wahab, M. H. and Rani, W. N. M. W. M. (2019) Designing safe street for women. International Journal of Recent Technology and Engineering, 8 (2). pp. 118-122. ISSN 2277-3878

Razali, R. and Hainin, M. R. and Hassan, N. A. and Idham, M. K. and Malek, M. S. C. and Warid, M. N. M. and Yaacob, H. and Mohamed, A. and Ismail, C. R. (2019) Field performance of asphalt pavement maintenance using cup lump rubber modified asphalt(CMA). In: 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Redzuan, Azah Farizah (2019) Perception of the contractors on collaborative relationship in pan Borneo project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rehman, H. and Naji, A. M. and Ali, W. and Kim, J. and Abdullah, R. A. and Yoo, H. K. (2019) Support design for the diversion tunnel of diamer basha dam, Pakistan, considering the recent developments in empirical systems. In: International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Rezania, S. and Alizadeh, H. and Cho, J. and Darajeh, N. and Park, J. and Hashemi, B. and Md. Din, M. F. and Krishnan, S. and Yadav, K. K. and Gupta, N. and Kumar, S. (2019) Changes in composition and structure of water hyacinth based on various pretreatment methods. BioResources, 14 (3). pp. 6088-6099. ISSN 1930-2126

Rezania, Shahabaldin and Alizadeh, Hossein and Park, Junboum and Md. Din, Mohd. Fadhil and Darajeh, Negisa and Ebrahimi, Shirin Shafiei and Saha, Bidyut Baran and Kamyab, Hesam (2019) Effect of various pretreatment methods on sugar and ethanol production from cellulosic water hyacinth. BioResources, 14 (1). pp. 592-606. ISSN 1930-2126

Ridwan Saeed, Intisar Ibrahim (2019) An instrument to measure students’ readiness for embedded system design course. PhD thesis, Universiti Teknologi Malaysia.

Romali, Noor Suraya and Yusop, Zulkifli and Mohd. Zaki, Nur Izyan Hani and Sulaiman, Muhammad @ S. A. Khushren and Ahmad Abdul Ghani, Nadiatul Adilah and Sulaiman, Suryati (2019) Flood damage function model for residential area in Kuantan: A preliminary study. International Journal of Integrated Engineering, 11 (2). pp. 203-213. ISSN 2229-838X

Roslan, Muhammad Khairi Azri and Ismail, Mohammad and Kueh, Ahmad Beng Hong and Mohamed Zin, Muhammad Rawi (2019) High-density concrete: exploring ferro boron effects in neutron and gamma radiation shielding. Construction and Building Materials, 215 . pp. 718-725. ISSN 0950-0618

Rosli, A. A. and Ismail, A. S. I. and Jaafar, M. Z. and Idris, A. K. and Muhamad Sidek, M. A. (2019) The importance of formation fluids and reservoir rock mineralogy characteristics chemical enhanced oil recovery (eor). Page 1 International Journal of Recent Technology and Engineering (IJRTE), 8 (1S). ISSN 2277-3878

Rosli, Mas Iliani (2019) Influence of considering Malaysia National Annex for seismic design of reinforced concrete building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rosman, N. A. and Alih, S. C. and Anuar, N. A. and Fazilan, N. N. and Halim, N. H. F. A. and Shad, H. (2019) Effect of infill panels on the seismic vulnerability of non-ductile reinforced concrete frames. International Journal of Engineering Research and Technology, 12 (8). pp. 1278-1287. ISSN 0974-3154

Roudi, Anita and Chelliapan, Shreeshivadasan and Kamyab, Hesam and Md. Dinorcid, Mohd. Fadhil and Krishnan, Santhana (2019) Removal of COD from landfill leachate by predication and evaluation of multiple linear regression (MLR) model and Fenton process. Egyptian Journal of Chemistry, 62 (7). pp. 1607-1618. ISSN 0449-2285

Rusbintardjo, Gatot and Abdul Wahab, Sitti Salmah and Khairuddin, Faridah Hanim and Ibrahim, Ahmad Nazrul Hakimi and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2019) Kesan bahan tambah RH-WMA ke atas sifat-sifat kejuruteraan bitumen PG-76. Jurnal Teknologi, 81 (4). pp. 125-132. ISSN 0127-9696

Rusbintardjo, Gatot and Chin, Meei Jiun and Ibrahim, Ahmad Nazrul Hakimi and Babashamsi, Peyman and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2019) A comparative study of monitoring methods in sustainable pavement system development. Jurnal Teknologi, 81 (5). pp. 41-51. ISSN 2180-3722

S

Sabli, Abd. Ramzi (2019) Bus rapid transit using compensation method as bus priority system at isolated three-arm junction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sachindra, D. A. and Ahmed, K. and Rashid, Md. Mamunur and Sehgal, V. and Shahid, S. and Perera, B. J. C. (2019) Pros and cons of using wavelets in conjunction with genetic programming and generalised linear models in statistical downscaling of precipitation. Theoretical and Applied Climatology, 138 (1-2). pp. 617-638. ISSN 0177-798X

Said, Aminu Saad (2019) Impact of climate change, variability and adaptation strategies on agriculture in semi-arid region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Saleh, S. and Alel, M. N. A. and Mohd. Yunus, N. Z. and Ahmad, K. and Ali, N. and Abang Hasbollah, D. Z. and Abdullah, R. A. (2019) Geochemistry characterisation of marine clay. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Saleh, Samaila and Mohd. Yunus, Nor Zurairahetty and Ahmad, Kamarudin and Ali, Nazri (2019) Improving the strength of weak soil using polyurethane grouts: a review. Construction and Building Materials, 202 . pp. 738-752. ISSN 0950-0618

Salih, M. N. A. and Md. Tahir, M. and Mohammad, S. and Ahmad, Y. and Sulaiman, A. and Shek, P. N. and Abraham, A. and Firdaus, M. and Aminuddin, K. M. and Khadavi, Khadavi (2019) Experimental study on flexural behaviour of partially encased cold-formed steel composite beams using rebar as shear connector. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Salih, Sinan Q. and Allawi, Mohammed Falah and Yousif, Ali A. and Armanuos, Asaad M. and Saggi, Mandeep Kaur and Ali, Mumtaz and Shahid, Shamsuddin and Al-Ansari, Nadhir and Yasee, Zaher Mundher and Chau, Kwok Wing (2019) Viability of the advanced adaptive neuro-fuzzy inference system model on reservoir evaporation process simulation: case study of Nasser Lake in Egypt. Engineering Applications of Computational Fluid Mechanics, 13 (1). pp. 878-891. ISSN 1994-2060

Salman, Saleem A. and Shahid, Shamsuddin and Ismail, Tarmizi and Ahmed, Kamal and Chung, Eun-Sung and Wang, Xiao-Jun (2019) Characteristics of annual and seasonal trends of rainfall and temperature in Iraq. Asia-Pacific Journal of Atmospheric Sciences, 55 (3). pp. 429-438. ISSN 1976-7633

Samsuri, Mohd. Fadzilah (2019) Pengurusan perubahan kerja bagi kontrak pembinaan projek kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sani, W. N. H. M. and Mohamed, A. and Khalid, N. H. A. and Nor, H. M. and Hainin, M. R. and Giwangkara, G. G. and Hassan, N. A. and Kamarudin, N. A. S. and Mashros, N. (2019) Improvement of CBR value in soil subgrade using garnet waste. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Sarbini, N. N. and Ibrahim, I. S. and Ismail, M. and Anuar, M. Z. T. and Mohsin, S. M. S. (2019) Experimental study on shear strength of composite slab with steel fibre reinforced concrete topping. Malaysian Construction Research Journal, 6 (1). pp. 119-131. ISSN 1985-3807

Sarijan, S. and Azman, S. and Said, M. I. M. and Lee, M. H. (2019) Ingestion of microplastics by commercial fish in Skudai river, Malaysia. EnvironmentAsia, 12 (3). pp. 75-84. ISSN 1906-1714

Sarwar, Farhan (2019) Psychological capital, contextual demands and resources, work-family linking mechanisms and satisfaction with work-family balance in academia of Pakistan. PhD thesis, Universiti Teknologi Malaysia.

Sa’adi, Zulfaqar and Shahid, Shamsuddin and Ismail, Tarmizi and Chung, Eun Sung and Wang, Xiao Jun (2019) Trends analysis of rainfall and rainfall extremes in Sarawak, Malaysia using modified Mann-Kendall test. Meteorology and Atmospheric Physics, 131 (3). pp. 263-277. ISSN 0177-7971

Sediqi, Mohammad Naser (2019) Spatio temporal pattern in the changes in availability and sustainability of water resources in Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sediqi, Mohammad Naser and Shiru, Mohammed Sanusi and Nashwan, Mohamed Salem and Ali, Rawshan and Abubaker, Shadan and Wang, Xiaojun and Ahmed, Kamal and Shahid, Shamsuddin and Md. Asaduzzaman, Md. Asaduzzaman and Manawi, Sayed Mir Agha (2019) Spatio-temporal pattern in the changes in availability and sustainability of water resources in Afghanistan. Sustainability (Switzerland), 11 (20). p. 5836. ISSN 2071-1050

Selamat, N. A. and Hainin, M. R. and Warid, M. N. M. and Idham, M. K. and Naqibah, S. N. (2019) Investigation on road damage due to vehicle overloading of high volume Ipoh state road. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Seman, Z. A. and Ahmad, R. and Haron, H. N. (2019) A designed module for support problem-solving skills among engineering technology education students. International Journal of Recent Technology and Engineering, 8 (1). pp. 92-97. ISSN 2277-3878

Septiropa, Z. and Osman, M. H. and Abd. Rahman, A. B. and Mohd. Ariffin, M. A. (2019) Effect of screw distance on combined profile cold form steel in increasing the compression member capacity. In: 1th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Shahrin, M. I. and Abdullah, R. A. and Jeon, S. and Jeon, B. and Sa'Ari, R. (2019) Numerical simulation of rock fragmentation by blasting using discrete element method and particle blast method. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Shao, Zehui and Armaghani, Danial Jahed and Bejarbaneh, Behnam Yazdani and Mu'azu, M. A. and Mohamad, Edy Tonnizam (2019) Estimating the friction angle of black shale core specimens with hybrid-ann approaches. Measurement: Journal of the International Measurement Confederation, 145 . pp. 744-755. ISSN 0263-2241

Sharafati, Ahmad and Khosravi, Khabat and Khosravinia, Payam and Ahmed, Kamal and Salman, Saleem Abdulridha and Yaseen, Zaher Mundher and Shahid, Shamsuddin (2019) The potential of novel data mining models for global solar radiation prediction. International Journal of Environmental Science and Technology, 16 (11). pp. 7147-7164. ISSN 1735-1472

Shariati, Mahdi and Heyrati, Arian and Zandi, Yousef and Laka, Hossein and Toghroli, Ali and Kianmehr, Peiman and Safa, Maryam and Salih, Musab and Shek, Poi Ngian (2019) Application of waste tire rubber aggregate in porous concrete. Smart Structures and Systems, 24 (4). pp. 553-566. ISSN 1738-1584

Shariati, Mahdi and Mafipour, Mohammad Saeed and Mehrabi, Peyman and Zandi, Yousef and Dehghani, Davoud and Bahadori, Alireza and Shariati, Ali and Nguyen, Thoi Trung and Salih, Musab N. A. and Shek, Poi Ngian (2019) Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures. Steel and Composite Structures, 33 (3). pp. 319-332. ISSN 12299367

Shariati, Mahdi and Rafiei, Shervin and Mehrabi, Peyman and Zandi, Yousef and Fooladvand, Rouhollah and Gharehaghaj, Behnam and Shariati, Ali and Nguyen, Thoi Trung and Salih, Musab N. A. and Shek, Poi Ngian (2019) Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete. Advances in Concrete Construction, 8 (3). pp. 225-237. ISSN 2287-5301

Shariff, M. and Puan, O. C. (2019) Implementation of chosen risk index during car-following behaviour under wet weather condition. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Shiraz, Hassan (2019) Hydrodynamic modelling of a sea-crossing bridge in the Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Shirazi, Mohammad Gharehzadeh and A. Rashid, Ahmad Safuan and Nazir, Ramli and Abdul Rashid, Azrin Hani and Kassim, Azman and Horpibulsuk, Suksun (2019) Investigation of tensile strength on alkaline treated and untreated kenaf geotextile under dry and wet conditions. Geotextiles and Geomembranes, 47 (4). pp. 522-529. ISSN 0266-1144

Shiru, Mohammed Sanusi and Shahid, Shamsuddin and Chung, Eun Sung and Alias, Noraliani (2019) Changing characteristics of meteorological droughts in Nigeria during 1901–2010. Atmospheric Research, 223 . pp. 60-73. ISSN 0169-8095

Shiru, Mohammed Sanusi and Shahid, Shamsuddin and Chung, Eun Sung and Alias, Noraliani and Scherer, Laura (2019) A mcdm-based framework for selection of general circulation models and projection of spatio-temporal rainfall changes: a case study of Nigeria. Atmospheric Research, 225 . pp. 1-16. ISSN 0169-8095

Shukri, N. A. and Mohamed, R. N. and Ishak, M. Y. and Mansor, S. and Mahmoor, M. S. N. and Azillah, N. and Zamri, F. (2019) Effects of elevated temperature on high performance concrete incorporating of metakaolin and garnet. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Soh, Y. L. and Veerasamy, K. and Jamal, M. H. and Ab. Razak, M. S. (2019) Preliminary modelling assessment of hydrodynamic simulation due to Terengganu Airport Runway Extension. In: Sustainable Civil and Construction Engineering Conference 2018, SCCEC 2018, 25-27 Aug 2018, University Putra Malaysia Kuala Lumpur, Malaysia.

Sohaili, Johan and Muniyandi, Shantha Kumari and Mohamad, Siti Suhaila and Ariffin, Azreen (2019) Effect of particle size and amount of nonmetallic PCB materials on the mechanical properties of rHDPE/PCB composites. Malaysian Journal of Fundamental and Applied Sciences, 15 (2). pp. 260-267. ISSN 2289-5981

Sukprasert, Sart and Hoy, Menglim and Horpibulsuk, Suksun and Arulrajah, Arul and A. Rashid, Ahmad Safuan and Nazir, Ramli (2019) Fly ash based geopolymer stabilisation of silty clay/blast furnace slag for subgrade applications. Road Materials and Pavement Design . ISSN 1468-0629

Sulaiman, A. and Salleh, N. M. and Sukardi, N. and Siang, T. C. and Saggaff, A. (2019) Experimental evaluation of composite beam-to-column joint using cold-formed steel sections. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Sulaiman, Suryati and Aris, Azmi and Abd. Razak, Abdul Syukor and Muda, Khalida and Nor Anuar, Aznah (2019) Influence of static mixer on the formation of biogranules. Jurnal Teknologi, 81 (1). pp. 23-30. ISSN 2180-3722

Suliman, Ali H. Ahmed and Mat Darus, Intan Zaurah (2019) Semi-distributed neural network models for streamflow prediction in a small catchment pinang. Environmental Engineering and Management Journal, 18 (2). pp. 535-544. ISSN 1582-9596

Syafiuddin, Achmad and Salmiati, Salmiati and Hadibarata, Tony and Salim, Mohd. Razman and Beng, Ahmad Hong Kueh and Suhartono, Suhartono (2019) Removal of silver nanoparticles from water environment: experimental, mathematical formulation, and cost analysis. Water, Air, and Soil Pollution, 230 (5). ISSN 0049-6979

Sydnaoui, Ikhlass and Noor Mohamed, Roslli and A. Kadir, Mariyana Aida (2019) The effects of seasonal thermal loads at expansion joints locations in Arabic area buildings. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11S2). pp. 406-412. ISSN 2278-3075

Sydnaoui, Ikhlass and Noor Mohamed, Roslli and A. Kadir, Mariyana Aida (2019) The thermal response of concrete frame building in Arabic area considering time-dependent properties of concrete. International Journal of Recent Technology and Engineering, 8 (3). pp. 7329-7335. ISSN 2277-3878

Sydnaoui, Ikhlass and Noor Mohamed, Roslli and Ab. Kadir, Mariyana Aida (2019) The thermal response of multi-storeies concrete frame building in the Arabic area. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 1863-1869. ISSN 2278-3075

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public- private partnering project in perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public-private partnering project in Perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

T

Tabatabaee, Sanaz (2019) Risk assessment tool for implementing building information modelling in industrialised building system project. PhD thesis, Universiti Teknologi Malaysia.

Tabatabaee, Sanaz and Mahdiyar, Amir and Durdyev, Serdar and Mohandes, Saeed Reza and Ismail, Syuhaida (2019) An assessment model of benefits, opportunities, costs, and risks of green roof installation: A multi criteria decision making approach. Journal of Cleaner Production, 238 . p. 117956. ISSN 0959-6526

Taghizadeh Valdi, Mohammad Hossein and Atrechian, Mohammad Reza and Shalkoohy, Ata Jafary and Balasbaneh, Ali Tighnavard (2019) Numerical study of seismic response of trapezoidal alluvial valleys against vertically propagating incident waves. Journal of Engineering Research (Kuwait), 7 (4). pp. 37-57. ISSN 2307-1885

Taherkhani, Roohollah and Saleh, A. L. (2019) Awareness and prevalence of industrialized building system (IBS) in Iran. Jurnal Teknologi, 81 (6). pp. 13-23. ISSN 2180-3722

Tahir, M. M. and Ngian, S. P. and Mohamad, S. and Sulaiman, A. and Aghlara, R. (2019) Structural behaviour of cold-formed steel of double c-lipped channel sections integrated with concrete slabs as composite beams. Latin American Journal of Solids and Structures, 16 (5). e195-e195. ISSN 1679-7817

Taiwo, E. M. and Yahya, K. (2019) Utilisation of building information modelling for indoor environmental quality assessment -a review. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27-28 Aug 2018, Johor, Malaysia.

Tajol Anuar, M. Z. and Sarbini, N. N. and Ibrahim, I. S. (2019) A comparative of building condition assessment method used in asia countries: a review. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Tan, Jia Yang and Ma, Chau Khun and Mohd. Apandi, Nazirah and Awang, Abdullah Zawawi and Omar, Wahid (2019) A review on repair of damaged concrete column under cyclic loading by using confinement. In: The Advances in Civil Engineering Materials. Lecture Notes in Civil Engineering, 19 . Springer Nature Singapore Pte Ltd, Singapore, pp. 22-29. ISBN 978-981-13-2510-6

Tan, May Ling (2019) Instructional scaffolding in online social collaborative learning environment for nurturing engineering students' knowledge construction level. Masters thesis, Universiti Teknologi Malaysia.

Tao, Hai and Bobaker, Aiman M. and Ramal, Majeed Mattar and Yaseen, Zaher Mundher and Hossain, Md. Shabbir and Shahid, Shamsuddin (2019) Determination of biochemical oxygen demand and dissolved oxygen for semi-arid river environment: application of soft computing models. Environmental Science and Pollution Research, 26 (1). pp. 923-937. ISSN 0944-1344

Teh, Kun Jie (2019) Efficiency of tuned liquid dampers in mitigating vibration of a plan-irregular structure. Masters thesis, Universiti Teknologi Malaysia.

Tukimat, Nurul Nadrah Aqilah and Harun, Sobri (2019) Comparative study on the reservoir operation planning with the climate change adaptation. SN Applied Sciences, 1 (11). p. 1449. ISSN 2523-3971

U

Ullah, A. and Kassim, A. and Alam, I. and Junaid, M. and Ahmad, I. S. (2019) Efficiency analysis of seepage of baz ali small dam, kurram agency using clay blanket and cut-off wall with sand filter. Bulletin of the Geological Society of Malaysia, 67 . pp. 125-130. ISSN 0126-6187

Umar, M. and Kassim, K. A. and Zango, M. U. and Muhammed, A. S. (2019) Performance evaluation of lime and microbial cementation in residual soil improvement. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Umar, S. and Vafaei, M. and Alih, S. C. (2019) Output-only damage detection using neural network and sensor clustering under ambient vibration. International Journal of Engineering Research and Technology, 12 (11). pp. 2023-2030. ISSN 0974-3154

Upom, M. R. and Asmawisham Alel, M. N. and Ab. Kadir, M. A. and Yuzir, A. (2019) Prediction of shear wave velocity in underground layers using particle swarm optimization. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Usman, K. R and Hainin, M. R. and Idham, M. K. and Warid, M. N. M. and Yaacob, H. and Hassan, N. A. and Azman, M. and Puan, O. C. (2019) Performance evaluation of asphalt micro surfacing - A review. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Usmani, Abdul Rahman Ahsan and Elshafey, Abdalrahman and Gheisari, Masoud and Chai, Changsaar and Aminudin, Eeydzah and Tan, Cher Siang (2019) A scan to as-built building information modeling workflow: a case study in 2 Malaysia. Journal of Engineering, Design and Technology, 18 (4). pp. 923-940. ISSN 1726-0531

V

Vafaei, Mohammadreza and Baniahmadi, Mahmoud and Alih, Sophia C. (2019) The relative importance of strong column-weak beam design concept in the single-story RC frames. Engineering Structures, 185 . pp. 159-170. ISSN 0141-0296

Vafaei, Mohammadreza and Omar Sheikh, Abdirahman Mursal and Alih, Sophia C. (2019) Experimental study on the efficiency of tapered strip dampers for the seismic retrofitting of damaged non-ductile RC frames. Engineering Structures, 199 . p. 109601. ISSN 0141-0296

Valipour, Alireza and Yahaya, Nordin and Md. Noor, Norhazilan and Valipour, Iman and Tamosaitiene, Jolanta (2019) A SWARA-COPRAS approach to the allocation of risk in water and sewerage public-private partnership projects in Malaysia. International Journal of Strategic Property Management, 23 (4). pp. 269-283. ISSN 1648-715X

Vijith, H. and Prasannakumar, V. and Reba, M. N. M. (2019) Differential effect of neotectonic process on stream characteristics: a geomorphologic evaluation of the Meenachil River Basin, Kerala, India. Physical Geography, 40 (1). pp. 91-109. ISSN 0272-3646

W

Wahab, Wahyuni (2019) Physical and chemical properties of recycled bitumen incorporating rejuvenator. Masters thesis, Universiti Teknologi Malaysia.

Wakil, Karzan and A.Jawawi, Dayang N. (2019) Intelligent web applications as future generation of web applications. Scientific Journal of Informatics, 6 (2). pp. 212-221. ISSN 2407-7658

Wang, Jing and Yaseen, Zaher Mundher and Shahid, Shamsuddin and Saggi, Mandeep Kaur and Tao, Hai and Kisi, Ozgur and Salih, Sinan Q. and Al-Ansari, Nadhir and Chau, Kwok Wing (2019) Implementation of evolutionary computing models for reference evapotranspiration modeling: short review, assessment and possible future research directions. Engineering Applications of Computational Fluid Mechanics, 13 (1). pp. 811-823. ISSN 1994-2060

Wang, Xiao Jun and Elmahdi, Amgad and Zhang, Jian Yun and Shahid, Shamsuddin and Liao, Chuan Hua and Zhang, Xu and Liu, Yong Gang (2019) Water use and demand forecasting model for coal-fired power generation plant in China. Environment, Development and Sustainability, 21 (4). pp. 1675-1693. ISSN 1387-585X

Wong, Jing Siong (2019) Effects on loading calculation of reinforced concrete structural design subjected to fire: review on building codes and standards. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Wong, Lydia Lee (2019) The challenges of facility manager involvement at design stage using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Wong, Meng Siang (2019) Similitude relationship for circular concrete filled steel tube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

X

Xie, Qiang and Sinaei, Hamid and Shariati, Mahdi and Khorami, Majid and Mohamad, Edy Tonnizam and Bui, Dieu Tien (2019) An experimental study on the effect of cfrp on behavior of reinforce concrete beam column connections. Steel and Composite Structures, 30 (5). pp. 433-441. ISSN 1229-9367

Xu, Hai and Zhou, Jian and Asteris, Panagiotis G. and Armaghani, Danial Jahed and Md. Tahir, Mahmood (2019) Supervised machine learning techniques to the prediction of tunnel boring machine penetration rate. Applied Sciences (Switzerland), 9 (18). p. 3715. ISSN 2076-3417

Y

Yaacob, H. and Abdul Hassan, N. and Mashros, N. and Ahmad, J. and Abdul Hamid, N. and Jaya, R. P. and Masri, K. A. and Awang, H. (2019) Stability and rutting resistance of porous asphalt mixture incorporating coconut shells and fibres. In: 2nd National Colloquium on Wind and Earthquake Engineering, NCWE 2018, 17-18 Aug 2018, Swiss Garden Kuantan, Malaysia.

Yahaya, Nor Ashikin (2019) Soft ground improvement using pile embankment. Masters thesis, Universiti Teknologi Malaysia.

Yamusa, B. Y. and Hezmi, M. A. and Ahmad, K. and Kassim, K. A. and Sa'ari, R. and Alias, N. and Mustaffar, M. and Kassim, A. (2019) Soil water characteristic curves for laterite soil at different water contents and methods as lining system. In: 11th International Conference on Geotechnical Engineering in Tropical Regions (GEOTROPIKA) and 1st International Conference on Highway and Transportation Engineering (ICHITRA) 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Yamusa, Y. B. and Alias, N. and Ahmad, K. and Sa'ari, R. and Mohd. Yunus, N. Z. (2019) Numerical modelling of leachate migration in compacted tropical laterite soil. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Yamusa, Y. B. and Sa’ari, R. and Ahmad, K. and Alias, N. and Mustaffar, M. and Foong, L. K. (2019) Monitoring leachate migration in compacted soil using digital image technique. Engineering, Technology & Applied Science Resaerch, 9 (1). pp. 3685-3691. ISSN 1792-8036

Yang, Haiqing and Koopialipoor, Mohammadreza and Armaghani, Danial Jahed and Gordan, Behrouz and Khorami, Majid and Tahir, M. M. (2019) Intelligent design of retaining wall structures under dynamic conditions. Steel and Composite Structures, 31 (6). pp. 629-640. ISSN 1229-9367

Yaseen, Zaher Mundher and Ebtehaj, Isa and Kim, Sungwon and Sanikhani, Hadi and Asadi, H. and Ghareb, Mazen Ismaeel and Bonakdari, Hossein and Wan Mohtar, Wan Hanna Melini and Al-Ansari, Nadhir and Shahid, Shamsuddin (2019) Novel hybrid data-intelligence model for forecasting monthly rainfall with uncertainty analysis. Water (Switzerland), 11 (3). pp. 1-23. ISSN 2073-4441

Yaseen, Zaher Mundher and Wan Mohtar, Wan Hanna Melini and Ameen, Ameen Mohammed Salih and Ebtehaj, Isa and Mohd. Razali, Siti Fatin and Bonakdari, Hossein and Salih, Sinan Q. and Al-Ansari, Nadhir and Shahid, Shamsuddin (2019) Implementation of univariate paradigm for streamflow simulation using hybrid data-driven model: case study in tropical region. IEEE Access, 7 . pp. 74471-74481. ISSN 2169-3536

Yong, Hua Song (2019) Building information modelling integration into Public-Private Partnership (PPP) risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yousef Almthailee, Yousef Hamdan (2019) Characterization of kaolin clay treated with ground granulated blast-furnace slag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yousif, Ali A. and Sulaiman, Sadeq Oleiwi and Diop, Lamine and Ehteram, Mohammad and Shahid, Shamsuddin and Al-Ansari, Nadhir and Yaseen, Zaher Mundher (2019) Open channel sluice gate scouring parameters prediction: different scenarios of dimensional and non-dimensional input parameters. Water (Switzerland), 11 (2). pp. 1-14. ISSN 2073-4441

Yunus, Riduan and Abdul Hamid, Abdul Rahim and Mohd. Noor, Siti Rahimah (2019) An integrated approach for sustainability in the application of industrialised building system (IBS). International Journal of GEOMATE, 17 (61). pp. 115-121. ISSN 2186-2982

Yusop, F. A. and Mohamed, A. and Nor, H. M. and Sam, A. R. M. and Khalid, N. H. A. and Ibrahim, W. Y. W. and Ismail, A. (2019) Influence of marine kaolin mortar mixed with effective microorganism on external heat transfer. In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20-22 Aug 2019, Langkawi, Kedah, Malaysia.

Yvonne, Pui (2019) Slope stability assessment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Z

Zahmatkesh, Farshad and Osman, Mohd H. and Talebi, Elnaz and Kueh, Ahmad B. H. and Tahir, Mahmood (2019) Structural performance of steel beams and frames with slant end-plate connections at elevated temperature. Engineering Structures, 187 . pp. 396-413. ISSN 0141-0296

Zaid, N. B. M. and Hainin, M. R. and Idham, M. K. and Warid, M. N. M. and Naqibah, S. N. (2019) Evaluation of skid resistance performance using british pendulum and grip tester. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 through 28 August 2018, Johor, Malaysia.

Zaidi, N. S. and Muda, K. and Abdul Rahman, M. A. and Sgawi, M. S. and Amran, A. H. (2019) Effectiveness of local waste materials as organic-based coagulant in treating water. In: 3rd International Conference on Architecture and Civil Engineering 2019, ICACE 2019, 26-27 June 2019, Seri Pacific Hotel, Kuala Lumpur, Malaysia.

Zaidi, N. S. and Sohaili, J. and Muda, K. and Saidi, M. S. (2019) Optimisation of static magnetic field (SMF) on physical properties of biomass using central composite design experiment. In: The 2nd Joint International Conference on Emerging Computing Technology and Sports (JICETS) 2019, 25-27 Nov 2019, Bandung, Indonesia.

Zaidi, Nur Syamimi and Muda, Khalida and Sillanpaa, M. (2019) Effects of extra-cellular polymeric substances towards physical properties of biomass under magnetic field exposure. International Journal of Environmental Science and Technology, 16 (7). pp. 3801-3808. ISSN 1735-1472

Zaidi, Nur Syamimi and Muda, Khalida and Sohaili, Johan and Hussein, Norelyza and Liew, Wai Loan and Sillanpää, Mika (2019) Potential of a static magnetic field to inhibit filamentous sludge bulking in activated sludge process. Journal of Environmental Engineering (United States), 145 (3). 04019001-04019001. ISSN 0733-9372

Zainal Abidin, Nur Syahidah (2019) Understanding the usage of whatsapp among academicians of higher learning institutions in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Zainorabidin, A. and Abdurahman, M. N. and Kassim, A. and Azlan, M. F. D. and Razali, S. N. and Ab. Rahman, E. S. E. (2019) Settlement behaviour of Parit Nipah peat under static embankment. International Journal of GEOMATE, 17 (60). pp. 151-155. ISSN 2186-2982

Zainuddin, Nurul and Mohd. Yunus, Nor Zurairahetty and Mohammed Al-Bared, Mohammed Ali and Marto, Aminaton and Harahap, Indra Sati Hamonangan and A. Rashid, Ahmad Safuan (2019) Measuring the engineering properties of marine clay treated with disposed granite waste. Measurement: Journal of the International Measurement Confederation, 131 . pp. 50-60. ISSN 0263-2241

Zawawi, Mohd. Asadi Abdullah (2019) Concentration of heavy metal in water, sediment and aquatic life at straits of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

This list was generated on Sun May 5 13:07:32 2024 +08.