Items where Division is "Civil Engineering" and Year is 2018

A

Ahmed, Kamal and Shahid, Shamsuddin and Nawaz, Nadeem (2018) Impacts of climate variability and change on seasonal drought characteristics of Pakistan. Atmospheric Research, 214 . pp. 364-374. ISSN 0169-8095

Abd. Rashid, Sabri (2018) Mechanistic and kinetics of carbon dioxide fixation in aerobic biogranules developed from palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rashid, Ahmad Safuan and Kueh, Ahmad Beng Hong and Mohamad, Hisham (2018) Behaviour of soft soil improved by floating soil-cement columns. International Journal of Physical Modelling in Geotechnics, 18 (2). pp. 95-116. ISSN 1346-213X

Abas, Darul Nafis and Zakaria, Rozana and Aminuddin, Eeydzah and Abdullah, Redzuan and Khan, Jam Shahzaib and Sahamir, Shaza Rina (2018) An outlook on strategic framework development needs of roles and involvement of joint property management in high rise green buildings in Malaysia. Chemical Engineering Transactions, 63 . pp. 427-432. ISSN 2283-9216

Abd. Rahman, Norhan and Loke, Kok Foong and Nazir, Ramli and Lewis, Roland W. (2018) Vibration effect influence upon non-aqueous phase liquid migration in double-porosity soil. Geologia Croatica, 71 (3). pp. 163-171. ISSN 1330-030X

Abd. Rahman, Norhan and Loke, Kok Foong and W. Lewis, Roland and Nazir, Ramli (2018) Laboratory investigation of lnapl migration in double-porosity soil under fractured condition using digital image analysis. Transport in Porous Media, 125 (3). pp. 521-542. ISSN 0169-3913

Abdul Aziz, Azmahani and Mohd. Haniffah, Mohd. Ridza (2018) Students perception of learning fluid mechanics using NALI model. In: New academia learning innovation (NALI) Symposium 2018.

Abdul Halim, Nur Hajarul Falahi and Alih, Sophia C. and Vafaei, Mohammadreza (2018) Structural behavior of rc columns transversely reinforced with frp strips. International Journal of Civil Engineering and Technology, 9 (4). pp. 1572-1583. ISSN 0976-6308

Abdul Hassan, Norhidayah and Aminudin, Eeydzah and Hussein, Ahmed Abdulameer and Al-Etba, Salam Ridha Oleiwi and Putra Jaya, Ramadhansyah (2018) Marshall properties of asphalt mixture containing garnet waste. In: 1st International Graduate Conference on Emerging Trends in Multidisciplinary Approaches - Published in Journal of Advanced Research in Materials Science.

Abdul kareem, Muyideen and Bakhary, Norhisham and Vafaei, Mohammadreza and Md. Noor, Norhazilan and Padil, Khairul H. (2018) Non-probabilistic wavelet method to consider uncertainties in structural damage detection. Journal of Sound and Vibration, 433 . pp. 77-98. ISSN 0022-460X

Abdul Shukor Lim, Abdul Haslim and Ismail, Zulhilmi and Jamal, Mohamad Hidayat and Jumain, Mazlin (2018) Vertical profiles of streamwise velocity inside nonand vegetated meandering compound channel. ARPN Journal of Engineering and Applied Sciences, 13 (7). pp. 2374-2380. ISSN 1819-6608

Abdul Shukor Lim, Nor Hasanah and Hussin, Mohd. Warid and Samadikouchaksaraei, Mostafa and Ismail, Mohammed A. and Md. Jaafar, Mohd. Faizal and Bhutta, Muhammad Aamer Rafique and Ariffin, Nur Farhayu and Muthusamy, Khairunisa and Han, Seung Lee (2018) Heat resistance of geopolymer mortars using waste blended ash. In: 1st International Conference on Durability Of Building and Infrastructures (DURABI) 2018.

Abdul Shukor Lim, Nor Hasanah and Mohammadhosseni, Hossei and Md. Tahir, Mahmood and Samadi, Mostafa and Mohd. Sam, Abdul Rahman (2018) Microstructure and strength properties of mortar containing waste ceramic nanoparticles. Arabian Journal for Science and Engineering, 43 . pp. 5305-5313. ISSN 2193-567X

Abdullah, M. E. and Jaya, R. P. and Shahafuddin, M. N. A. and Yaacob, H. and Wan Ibrahim, M. H. and Nazri, F. M. and Ramli, N. I. and Mohammed, A. A. (2018) Performance of kaolin clay on the concrete pavement properties. IOP Conf. Series: Materials Science and Engineering, 2018 . pp. 1-5. ISSN 1757-8981

Abdullah, R. and Yusufianshah, Dedy and Alel, M. N. A. and Jusoh, Siti Nurafida and Hezmi, Mohd. Azril and Yunus, N. Z. M. and Ali, A. N. and Azizi, M. A. (2018) Slope stability analysis of quarry face at Karang Sambung district, central Java, Indonesia. International Journal of Civil Engineering and Technology, 9 (1). pp. 857-864. ISSN 0976-6308

Abdullah, Rini Asnida and Tsutsumi, Takashi (2018) Evaluation of tensile strength of Brazilian test under solid and ring disks using finite element analysis. Sains Malaysiana, 47 (4). pp. 683-689. ISSN 0126-6039

Abdullah, Rohayu and Kanniah, Kasturi Devi and Ho, Chin Siong (2018) Identification of suitable trees for urban parks and roadsides in Iskandar Malaysia. Chemical Engineering Transactions, 63 . pp. 385-390. ISSN 2283-9216

Abo Sabah, S. H. and Kueh, Ahmad Beng Hong and Al-Fasih, M. Y. (2018) Bio-inspired vs. conventional sandwich beams: A low-velocity repeated impact behavior exploration. Construction and Building Materials, 169 . pp. 193-204. ISSN 0950-0618

Abu Bakar, Mohamad Noor Ropiah (2018) Framework for cost saving estimation of commercial building in energy efficiency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abu Hassan, Shukur and Omar, Balqis and Wong, Voon How and Abdul Hanan, Umar (2018) Flexural performance of composites sandwich beam with core made of polyurethane foam filled glass fibre reinforced polyester recyclates. In: 3rd Proceeding of Civil Engineering Volume 1 - Structure and Material, 4 June 2018 through 5 June 2018, UTM Skudai.

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Najafian, Gholamhossein and M. Nor, M. Nasrul Kamal and Mat Soom, Ezanizam (2018) Lifetime extension of ageing offshore structures by global ultimate strength assessment (GUSA). Malaysian Journal Of Civil Engineering, 30 (1). pp. 152-171. ISSN 1823-7843

Afsaneh, Sheikhi and Kanniah, Kasturi Devi (2018) Impact of land cover change on urban surface temperature in Iskandar Malaysia. Chemical Engineering Transactions, 63 . pp. 25-30. ISSN 2283-9216

Aghlara, Reza and Md. Tahir, Mahmood (2018) Measurement of strain on concrete using an ordinary digital camera. Measurement: Journal of the International Measurement Confederation, 126 . pp. 398-404. ISSN 0263-2241

Aghlara, Reza and Md. Tahir, Mahmood (2018) A passive metallic damper with replaceable steel bar components for earthquake protection of structures. Engineering Structures, 159 . pp. 185-197. ISSN 0141-0296

Aghlara, Reza and Md. Tahir, Mahmood and Adnan, Azlan (2018) Experimental study of Pipe-Fuse Damper for passive energy dissipation in structures. Journal of Constructional Steel Research, 148 . pp. 351-360. ISSN 0143-974X

Ahmad, Nor Adilah (2018) Rainfall intensity duration frequency curve for Sungai Layang catchment under climate change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed, K. and Shahid, S. and Ismail, T. and Nawaz, N. and Wang, X. J. (2018) Absolute homogeneity assessment of precipitation time series in an arid region of Pakistan. Atmosfera, 31 (3). pp. 301-316. ISSN 0187-6236

Ahmed Shourav, Mohammad Sabbir and Shahid, Shamsuddin and Singh, Bachan and Mohsenipour, Morteza and Chung, Eun-Sung and Wang, Xiao-Jun (2018) Potential impact of climate change on residential energy consumption in Dhaka city. Environmental Modeling and Assessment, 23 (2). pp. 131-140. ISSN 1420-2026

Ahsan Usmani, Abdul Rahman (2018) Integration of as-built building information modeling and augmented reality in construction industry : a case study of the (UTM) ECO-HOME. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Akhoundan, Majid Reza and Khademi, Kia and Bahmanoo, Sam and Wakil, Karzan and Mohamad, Edy Tonnizam and Khorami, Majid (2018) Practical use of computational building information modeling in repairing and maintenance of hospital building - case study. Smart Structures and Systems, 22 (5). pp. 575-586. ISSN 1738-1584

Al Janabi, Tamadhur H. F. (2018) Construction bid model for residential building projects in Dubai. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al-Amin, Danladi Bello (2018) Modelling the impacts of land-used and climate change in Skudai river watershed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al-Fasih, M. Y. and Kueh, A. B. H. and Abo Sabah, S. H. and Yahya, M. Y. (2018) Tow waviness and anisotropy effects on Mode II fracture of triaxially woven composite. Steel and Composite Structures, 26 (2). pp. 241-253. ISSN 1229-9367

Algaifi, Hassan Amer and Abu Bakar, Suhaimi and Mohd. Sam, Abdul Rahman and Zainal Abidin, Ahmad Razin and Shahir, Shafinaz and AL-Towayti, Wahid Ali Hamood (2018) Numerical modeling for crack self-healing concrete by microbial calcium carbonate. Construction and Building Materials, 189 . pp. 816-824. ISSN 0950-0618

Ali, Nazri and Ismail, Siti Saidatul Azween (2018) Hysteresis of filter paper method on laterite soil. International Journal of Latest Transactions in Engineering and Science (IJLTES), 3 (3). pp. 28-34. ISSN 2321-0605

Ali Sahraei, M. and Che Puan, O. and Hosseini, S. M. P. and Almasi, M. H. (2018) Establishing a new model for estimation of the control delay at priority junctions in Malaysia. Cogent Engineering, 5 (1). ISSN 2331-1916

Alih, Sophia C. and Vafaei, Mohammadreza and Ismail, Nufail and Pabarja, Ali (2018) Experimental study on a new damping device for mitigation of structural vibrations under harmonic excitation. Earthquakes and Structures, 14 (6). pp. 567-576. ISSN 2092-7614

Aljawadi, Ahmed Sabah and Marsono, Abdul Kadir and Ismail, Che Ros (2018) Ductility of reinforced concrete sub frame for industrialized building system. Jurnal Teknologi, 8 (2). pp. 1-9. ISSN 2180-3722

Alzuabidi, Habeeb Lateef Muttashar (2018) Performance of geopolymer self compacting concrete using spent garnet as sand replacement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amiri, S. T. and Nazir, R. and Dehghanbanadaki, A. (2018) Experimental study of geotechnical characteristics of crushed glass mixed with Kaolinite soil. International Journal of GEOMATE, 14 (45). pp. 170-176. ISSN 2186-2982

Amran, A. H. and Zaidi, N. S. and Muda, K. and Loan, L. W. (2018) Effectiveness of natural coagulant in coagulation process: A review. International Journal of Engineering and Technology(UAE), 7 (3). pp. 34-37. ISSN 2227-524X

Amri Mohd., Fazly and Abdul Maulud, Khairul Nizam and A. Karim, Othman and Ibrahim, Muhammad Afiq and Benson, Yannie Anak and Abd. Wahab, Ahmad Khairi (2018) Integration of Geospatial Method and Hydrodynamic Modelling to Study the Impact of Sea Level Rise on the Coastal Area. Jurnal Kejuruteraan, 30 (1). pp. 65-75. ISSN 0128-0198

Annammala, Kogila Vani and Mohamad, Nur Athirah and Yusop, Zulkifli and Mohd. Yusoff, Abdull Rahim and Nainar, Anand and Sugumaran, Dhinesh (2018) Application and adaptation of sediment fingerprinting approach in Asian countries: a review. In: 7th International Graduate Conference on Engineering, Science and Humanities.

Apandi, N. M. and Ma, C. K. and Chin, C. L. and Awang, A. Z. and Omar, W. (2018) The effect of pre-damaged level on repair damaged columns by using steel straps tensioning technique. International Journal of Engineering and Technology(UAE), 7 (3). pp. 31-33. ISSN 2227-524X

Armaghani, D. J. and Faradonbeh, Roohollah Shirani and Momeni, E. and Fahimifar, A. and Tahir, Mahmood M. D. (2018) Performance prediction of tunnel boring machine through developing a gene expression programming equation. Engineering with Computers, 34 (1). pp. 129-141. ISSN 0177-0667

Asaad, Mohammad Ali and Ismail, Mohammad and A. Khalid, Nur Hafizah and Huseien, Ghasan Fahim and Raja, Pandian Bothi (2018) Elaeis guineensis leaves extracts as eco-friendly corrosion inhibitor for mild steel in hydrochloric acid. Jurnal Teknologi, 80 (6). pp. 53-59. ISSN 0127-9696

Asaad, Mohammad Ali and Ismail, Mohammad and Md. Tahir, Mahmood and Huseien, Ghasan Fahim and Raja, Pandian Bothi and Asmara, Yuli Panca (2018) Enhanced corrosion resistance of reinforced concrete: role of emerging eco-friendly Elaeis guineensis/silver nanoparticles inhibitor. Construction and Building Materials, 188 . pp. 555-568. ISSN 0950-0618

Asadsangabifard, M. and Ismail, Z. and Yusop, Z. and Ong, Z. C. and Mohd., Nuruol S. and Roushenas, P. and Tam, J. H. (2018) Temporal and spatial variation of grey water (sullage) properties from commercial and residential catchments. Desalination and Water Treatment, 132 . pp. 188-196. ISSN 1944-3994

Awaludin, Safiah Zaleha (2018) Horizontal shear force for different arrangements of coupling bars in precast concrete slab with and without steel fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abdullah Zawawi and Ma, Chau Khun and Beng, Ahmad Hong Kueh and Omar, Wahid (2018) Review study on the current development of confined high-strength concrete. International Journal of Structural Engineering, 9 (3). pp. 224-257. ISSN 1758-7328

Azillah, Nazry (2018) Performance of lightweight concrete using palm oil clinker aggregates for precast application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azmi, Nurul Afiqah and Chai, Chang Saar and Chin, Li Wei (2018) Building information modeling (BIM) in architecture, engineering and construction (AEC) industry: a case study in Malaysia. In: 21st International Conference on Advancement of Construction Management and Real Estate, CRIOCM 2016, 14 December 2016 through 17 December 2016, Kowloon, Hong Kong.

Azzmi, Norazura Mizal and Mohamad Yatim, Jamaludin (2018) Kenaf fibrous concrete: mechanical properties with different fiber volume fraction. International Journal on Advanced Science, Engineering and Information Technology, 8 (4). pp. 1036-1042. ISSN 2088-5334

B

Bachok, Mohd. Fairuz and Khalid, Khairi and Shamsudin, Supiah and Abidin, Roslan Zainal and Jeevaragagam, Ponselvi and Harun, Sobri (2018) Local conditions wind multiplier map as supporting tool in windstorm hazard assessment for Malaysian districts (Study Case: Kuantan, Pahang). ARPN Journal of Engineering and Applied Sciences, 13 (14). pp. 4281-4286. ISSN 1819-6608

Bachok, Mohd. Fairuz and Shamsudin, Supiah and Zainal Abidin, Roslan and Jeevaragagam, Ponselvi and Harun, Sobri (2018) Establishment of windstorm-producing thunderstorms hazard threshold in peninsular Malaysia. Journal of Engineering and Applied Sciences, 13 (17). pp. 7364-7372. ISSN 1816-949X

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Khaleghi, Seyed Jalal (2018) Sustainability choice of different hybrid timber structure for low medium cost single-story residential building: Environmental, economic and social assessment. Journal of Building Engineering, 20 . pp. 235-247. ISSN 2352-7102

Balubaid, Saeed and Mohammed Zin, Rosli and Mydin, Shaik Hussein (2018) Methodology on empirical study in determining critical energy efficiency factors for building structural components. International Journal on Advanced Science, Engineering and Information Technology, 8 (3). pp. 889-896. ISSN 2088-5334

Bavafaa, Ali and Mahdiyar, Amir and Marsono, Abdul Kadir (2018) Identifying and assessing the critical factors for effective implementation of safety programs in construction projects. Safety Science, 106 . pp. 47-56. ISSN 0925-7535

Bello, A. A. D. and Haniffah, M. R. M. and Hashim, N. B. and Anuar, K. M. (2018) Estimation of hydrological changes in a tropical watershed using multi-temporal land-use and dynamic modelling. Jurnal Teknologi, 80 (3). pp. 123-136. ISSN 0127-9696

Buhari, Suffian (2018) Design behaviour of cold-formed steel encased composite beam with protruded link. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bujang, M. and Hainin, M. R. and Abd. Majid, M. Z. and Mohd. Satar, M. K. I. and Azahar, W. N. A. W. (2018) Assessment framework for pavement material and technology elements in green highway index. Journal of Cleaner Production, 174 . pp. 1240-1246. ISSN 0959-6526

Bunawan, Aliff Ridzuan and Momeni, Ehsan and Armaghani, Danial Jahed and Mat Said, Khairun Nissa and Rashid, Ahmad Safuan A. (2018) Experimental and intelligent techniques to estimate bearing capacity of cohesive soft soils reinforced with soil-cement columns. Measurement: Journal of the International Measurement Confederation, 124 . pp. 529-538. ISSN 0263-2241

Burhanudin, Mohd. Khairy and Wan Ibrahim, Mohd. Haziman and Mohd. Sani, Mohd. Syahrul Hisyam and Juki, Mohd. Irwan and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Shahidan, Shahiron and Basirun, Nurul Fasihah and Mohd. Bosro, Mohamad Zulhairi (2018) Influence of ground coal bottom ash with different grinding time as cement replacement material on the strength of concrete. Malaysian Construction Research Journal, 4 (SI2). pp. 93-102. ISSN 1985-3807

C

Chai, Teck Jung and Tan, Cher Siang and Chow, Tio Kiong and Ling, Philip Chie Hui and Koh, Heng Boon (2018) A review on prefab industrialised building system modular construction in Malaysia: the perspective of non-structural studies. In: The Advances in Civil Engineering Materials. Lecture Notes in Civil Engineering, 19 (NA). Springer Nature Singapore Pte Ltd, Singapore, pp. 11-21. ISBN 978-981-13-2510-6

Chee, Loong Chin and Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Kueh, Ahmad Beng Hong (2018) Stress-strain evaluation of steel-strapped high-strength concrete with modified self-regulating end clips. Structural Concrete, 19 (4). pp. 1036-1048. ISSN 1464-4177

Che’mat, Nurulain and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Mashros, Nordiana and Yaacob, Haryati and Hainin, Mohd. Rosli and Mohd. Satar, Mohd. Khairul Idham and Ali, Mohamad Idris (2018) Effects of nano-kaolin clay on the rutting resistance of asphalt binder. In: 9th International Conference on Nanoscience and Nanotechnology 2018, NANO-SciTech 2018, 26 February 2018 - 1 March 2018, Selangor, Malaysia.

Chin, Sofrie Siew Yung (2018) Structural behaviour of high-strength concrete column confined with steel strapping tensioning technique subjected to constant axial and lateral cyclic loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chow, Ming Fai and Yusop, Zulkifli (2018) Contributions of dry and wet weather runoffs to annual pollutant loading in tropical urban catchments. In: Global Civil Engineering Conference 2017. Lecture Notes in Civil Engineering, 9 (NA). Springer Nature Singapore Pte Ltd, Singapore, pp. 1511-1521. ISBN 978-981-10-8015-9

Chua, Fong Teng and Abd. Samat, Roslida and Mohd. Mustakim, Nur Akmal Hayati and Saad, Sariffuddin and Abu Bakar, Suhaimi (2018) Lateral displacement and shear lag effect of combination of diagrid-frame structure (paper id-48). In: 1st International Conference on Civil and Environmental Engineering, CENVIRON 2017, 28 November 2017 - 29 November 2017, Penang, Malaysia.

D

Drahman, Siti Hasyyati and Kueh, Ahmad Beng Hong and Zainal Abidin, Ahmad Razin and Nikmatin, Siti (2018) Efficient cumulative breakage distribution and breakage rate computation with minimal experiment intervention incorporating optimal time determination for fine grinding simulation. Powder Technology, 329 . pp. 313-322. ISSN 0032-5910

E

Ehteram, M. and Othman, F. B. and Yaseen, Z. M. and Afan, H. A. and Allawi, M. F. and Malek, M. B. A. and Ahmed, A. N. and Shahid, S. and Singh, V. P. and El-Shafie, A. (2018) Improving the Muskingum flood routing method using a hybrid of particle swarm optimization and bat algorithm. Water (Switzerland), 10 (6). ISSN 2073-4441

Erabee, Iqbal Khalaf and Ahsan, Amimul and Jose, Bipin and A. Aziz, M. Manniruzzaman and Ng, A. W. M. and Idrus, Syazwani and Nik Daud, Nik Norsyahariati (2018) Adsorptive treatment of landfill leachate using activated carbon modified with three different methods. KSCE Journal of Civil Engineering, 22 (4). pp. 1083-1095. ISSN 1226-7988

F

Faridmehr, Iman and Md. Tahir, Mahmood and Osman, Mohd. Hanim and Razavykia, Abbas (2018) Structural performance of isolated steel beam-to-column connection. American Journal Of Civil Engineering And Architecture, 6 (2). pp. 68-79. ISSN 2328-398X

Fazilan, Nurul Nabila and Fazilan, Nurul Nabila and Rosman, Nurul Amiera and Anuar, Nur Amalina and Alih, Sophia C. (2018) Seismic fragility of low ductile reinforced concrete frame in malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1559-1571. ISSN 0976-6308

Firdaus, A. and Azman, S. (2018) Improvement of Sungai Sebulung water quality using Effective Microorganism. International Journal of Engineering and Technology(UAE), 7 (3). pp. 59-61. ISSN 2227-524X

Foo, Kian Seng (2018) Development of a computer based green highway energy efficiency index assessment for Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foong, L. K. and Rahman, N. A. and Nazir, R. and Lewis, R. W. (2018) Study of aqueous and non-aqueous phase liquid in fractured double-porosity soil using digital image processing. Geologia Croatica, 71 (2). pp. 55-63. ISSN 1330-030X

H

Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Yaacob, Haryati and Abdullah, Noor Azlan (2018) Performance of asphaltic concrete containing black rice husk ash at different aging. In: International Congress on Technology, Engineering & Science.

Haron, Zaiton and Jusli, Euniza and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah and Yaacob, Haryati and Yahya, Khairulzan and Mohamad, Azman and Yahya, Musli Nizam (2018) Prediction of sound absorption coefficient for double layer rubberised concrete blocks. International Journal of Engineering & Technology, 7 (2.29). pp. 704-710. ISSN 2227-524X

Hasan, M. R. M. and You, Z. and Satar, M. K. I. M. and Warid, M. N. M. and Kamaruddin, N. H. M. and Ge, D. and Zhang, R. (2018) Effects of titanate coupling agent on engineering properties of asphalt binders and mixtures incorporating LLDPE-CaCO3 pellet. Applied Sciences (Switzerland), 8 (7). ISSN 2076-3417

Hazreek, Z. A. M. and Hashim, M. M. M. and Asmawisham, A. M. N. and Zawawi, Mohd. Hafiz and Fairus, Y. M. and Kamarudin, A. F. and Ashraf, M. I. M. and Rosli, S. and Mohd. Muztaza, Nordiana (2018) Seawater intrusion mapping using electrical resistivity imaging (eri) at Malaysian coastal area. International Journal of Civil Engineering and Technology, 9 (9). pp. 1185-1193. ISSN 0976 - 6308

Hezmi, Muhammad Azril and Kasiman, Erwan Hafizi and Mustaffar, Mushairry and Hanapi, Muhammad Nassir and Abdul Aziz, Azmahani and Sa'Ari, Radzuan (2018) Framework of survey camp course in civil engineering program using project based learning. In: Proceeding of New Academia Learning Innovation NALI 2018 Exhibition and Competation.

Hezmi, Muhammad Azril and Mustaffar, Mushairry and Sa'Ari, Radzuan (2018) Innovative design of survey camp course for civil engineering program. In: Proceedings of New Academia Learning Innovation (NALI) Symposium 2018.

Hossein, Shad and Mohammadreza, Vafaei and Hamid Pesaran, Behbahani and Abdulkareem M., Oladimeji (2018) Experimental study on TLDs equipped with an upper mounted baffle. Smart Structures and Systems, 21 (1). pp. 37-51. ISSN 1738-1584

Hui Mean, Foo and Yusop, Z. and Yusof, F. (2018) Drought analysis and water resource availability using standardised precipitation evapotranspiration index. Atmospheric Research, 201 . pp. 102-115. ISSN 0169-8095

Huseien, Ghasan Fahim and Ismail, Mohammad and Md. Tahir, Mahmood and Mirza, Jahangir and A. Khalid, Nur Hafizah and Asaad, Mohammad Ali and Husein, Ahmed Abdulameer and Sarbini, Noor Nabilah (2018) Synergism between palm oil fuel ash and slag: Production of environmental-friendly alkali activated mortars with enhanced properties. Construction and Building Materials, 170 . pp. 235-244. ISSN 0950-0618

Huseien, Ghasan Fahim and Ismail, Mohammad and Tahir, Mahmood and Mirza, Jahangir and Hussein, Ahmed and Khalid, Nur Hafiza and Sarbini, Noor Nabilah (2018) Performance of sustainable alkali activated mortars containing solid waste ceramic powder. Chemical Engineering Transactions, 63 . pp. 673-678. ISSN 2283-9216

Huseien, Ghasan Fahim and Md. Tahir, Mahmood and Mirza, Jahangir and Mohammad Ismail, Mohammad Ismail and Shah, Kwok Wei and Asaad, Mohammad Ali (2018) Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars. Construction and Building Materials, 175 . pp. 174-186. ISSN 0950-0618

Huseien, Ghasan Fahim and Memon, Ruhal Pervez and Kubba, Ziyad and Mohd. Sam, Abdul Rahaman and Asaad, Mohammad Ali and Mirza, Jahangir and Memon, Uroosa (2018) Mechanical, thermal and durable performance of wastes sawdust as coarse aggregate replacement in conventional concrete. Jurnal Teknologi, 8 (1). pp. 151-161. ISSN 2180-3722

Huseien, Ghasan Fahim and Mohammad Ismail, Mohammad Ismail and Tahir, Mahmood and Mirza, Jahangir and Hussein, Ahmed and Khalid, Nur Hafiza and Sarbini, Noor Nabilah (2018) Effect of binder to fine aggregate content on performance of sustainable alkali activated mortars incorporating solid waste materials. Chemical Engineering Transactions, 63 . pp. 667-672. ISSN 2283-9216

Huseien, Ghasan Fahim and Mohd. Sam, Abdul Rahman and Mirza, Jahangir and Md. Tahir, Mahmood and Asaad, Mohammad Ali and Ismail, Mohammad and Shah, Kwok Wei (2018) Waste ceramic powder incorporated alkali activated mortars exposed to elevated Temperatures: Performance evaluation. Construction and Building Materials, 187 . pp. 307-317. ISSN 0950-0618

Hussin, Mohd. Warid and Mohd. Sam, Abdul Rahman and Mohd. Ariffin, Mohd. Azreen and Han, Seung Lee and Ariffin, Nur Farhayu and Ismail, Mohammed A. and Samadikouchaksaraei, Mostafa and Abdul Shukor Lim, Nor Hasanah (2018) Resistance of mortar using high volume oil palm biomass waste against sulphate attack. In: 1st International Conference on Durability of Building and Infrastructures (DURABI) 2018.

I

Idris, Nurhidayah (2018) Prioritization of reputation loss factor subject to pipeline explosion from public perceptions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Roslina and Ismail, Rozana (2018) Students habits and digital game preferences among young children in Malaysia: a case of designing an educational game. In: International Graduate Conference on Engineering, Sciences and Humanities.

Ibrahim, Roslina and Ismail, Rozana (2018) Teachers perception on digital game: a preliminary investigation towards educational game application for Islamic religious primary schools. In: 2018 International Conference on Information and Communication Technology for the Muslim World, ICT4M 2018, 23 July 2018 - 25 July 2018, Kuala Lumpur, Malaysia.

Ishak, Nor Aziah (2018) Volume loss assessment for twin tunneling of Klang valley mass rapid transit line 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Shafiq (2018) Characterization and properties of bamboo ash replacement in fly ash based geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, M. and Shariati, M. and Awal, A. S. M. A. and Chiong, C. E. and Chahnasir, E. S. and Porbar, A. and Heydari, A. and Khorami, M. (2018) Strengthening of bolted shear joints in industrialized ferrocement construction. Steel and Composite Structures, 28 (6). pp. 681-690. ISSN 1229-9367

Ismail, Neza (2018) Robust engineering in maintainability of building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, R. and Ibrahim, A. and Adnan, A. (2018) Damage assessment of high-rise reinforced concrete buildings in peninsular Malaysia subjected to Ranau earthquake. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Langkawi, Malaysia.

Ismail, R. and Ibrahim, A. and Adnan, A. (2018) Damage assessment of medium -rise reinforced concrete buildings in peninsular Malaysia subjected to ranau earthquake. International Journal of Civil Engineering and Technology, 9 (7). pp. 881-888. ISSN 0976-6308

Ismail, R. and Ibrahim, A. and Hamid, H. and Rusop, M. and Adnan, A. (2018) Experimental study on mechanical properties of elastomer containing carbon nanotubes. Journal of Engineering Science and Technology, 13 (3). pp. 656-664. ISSN 1823-4690

Ismail, R. and Ibrahim, A. and Rusop, M. and Adnan, A. (2018) Determination of mechanical properties natural rubber compounds using double shear test pieces. http://www.iaeme.com/IJCIET/index.asp37editor@iaeme.comInternational Journal of Civil Engineering and Technology (IJCIET), 9 (8). pp. 37-43. ISSN 0976-6308

Ismail, Tarmizi and Ahmed, Kamal and Alamgir, Mahiuddin and Kakar, Mohammad Noor and Fadzil, Abu Bakar (2018) Bivariate flood frequency analysis using gumbel copula. Malaysian Journal Of Civil Engineering, 30 (2). pp. 193-201. ISSN 1823-7843

Ismail, Tarmizi and Alamgir, Md. Mahiuddin and Noor, Muhammad (2018) Bivariate frequency analysis of flood variables using copula in Kelantan river basin. Malaysian Journal of Civil Engineering, 30 (3). pp. 395-404. ISSN 1823-7843

J

Jusoh, Muhammad Noor Hazwan (2018) Hydrodynamic cavitation using orifice plate configurations and arrangements for tertiary treatment of palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jameran, Aminuddin (2018) Mechanical properties and deterioration severity of fibre reinforced concrete exposed to elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahed Armaghani, D. and Safari, V. and Fahimifar, A. and Mohd. Amin, M. F. and Monjezi, M. and Mohammadi, M. A. (2018) Uniaxial compressive strength prediction through a new technique based on gene expression programming. Neural Computing and Applications, 30 (11). pp. 3523-3532. ISSN 0941-0643

Jatarona, Nurul Alifah (2018) Poor performance of public construction project in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jeffry, S. N. A. and Jaya, R. P. and Hassan, N. A. and Yaacob, H. and Mirza, J. and Drahman, S. H. (2018) Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen. Construction and Building Materials . ISSN 0950-0618

Jeffry, Siti Nur Amiera and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Mohd. Satar, Mohd. Khairul Idham (2018) Mechanical performance of asphalt mixture containing nano-charcoal coconut shell ash. Construction and Building Materials, 173 . pp. 40-48. ISSN 0263-8762

Jusoh, Siti Norafida and Abdullah, Rini Asnida and Mohd. Yunus, Nor Zurairahetty and Mohamad, Hisham and Yusufiansyah, Dedy (2018) Geotechnical aspects of tunnel lining with segmental joint parameters to improve soil surface settlement prediction. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 August 2018 - 28 August 2018, Johor, Malaysia.

K

Kam, Chee Zhou (2018) Fluid dynamics and thermodynamics numerical modelling of self-healing fibre reinforced laminated composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kado, Bishir and Mohammad, Shahrin and Lee, Yeong Huei and Shek, Poi Ngian and Ab. Kadir, Mariyana Aida and Muftah, Fadhluhartini (2018) Review on column fire resistance design for concrete filled steel tube. Jurnal Teknologi, 80 (6). pp. 169-179. ISSN 0127-9696

Kanniah, Kasturi Devi and Siong, Ho Chin (2018) Tree canopy cover and its potential to reduce CO2 in South of Peninsular Malaysia. Chemical Engineering Transactions, 63 . pp. 13-18. ISSN 2283-9216

Keyvanfar, Ali and Shafaghat, Arezou and Lamit, Hasanuddin (2018) A decision support tool for a walkable integrated neighbourhood design using a multicriteria decision-making method. Scientific Journal of Silesian University of Technology. Series Transport, 100 . pp. 45-68. ISSN 0209-3324

Khalid, Nor Aisah (2018) Soft ground improvement by prefabricated vertical drain (pvd). Masters thesis, Universiti Teknologi Malaysia.

Khan, N. and Shahid, S. and Ahmed, K. and Ismail, T. and Nawaz, N. and Son, M. (2018) Performance assessment of general circulation model in simulating daily precipitation and temperature using multiple gridded datasets. Water (Switzerland), 10 (12). ISSN 2073-4441

Khan, Najeebullah and Pour, Sahar Hadi and Shahid, Shamsuddin and Ismail, Tarmizi and Ahmed, Kamal and Chung, Eun Sung and Nawaz, Nadeem and Wang, Xiaojun (2018) Spatial distribution of secular trends in annual and seasonal precipitation over Pakistan. Climate Research, 74 (2). pp. 95-107. ISSN 0936-577X

Khankhaje, Elnaz and Rafieizonooz, Mahdi and Salim, Mohd. Razman and Khan, Rawid and Mirza, Jahangir and Siong, Ho Chin and Salmiati, Salmiati (2018) Sustainable clean pervious concrete pavement production incorporating palm oil fuel ash as cement replacement. Journal of Cleaner Production, 172 . pp. 1476-1485. ISSN 0959-6526

Khir, M. S. M. and Muda, K. and Hussein, N. and Khanan, M. F. A. and Othman, M. N. and Hashim, N. and Dahari, N. (2018) Spatio-temporal analysis of PM10 in Southern Peninsular Malaysia. International Journal of Engineering and Technology(UAE), 7 (3). pp. 27-30. ISSN 2227-524X

Khiyon, Mohammad Iqbal (2018) The effects of spent garnet in high strength concrete subjected to elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khoshnava, S. M. and Rostami, R. and Valipour, A. and Ismail, M. (2018) Rank of green building material criteria based on the three pillars of sustainability using the hybrid multi criteria decision making method. Journal of Cleaner Production, 173 . pp. 82-99. ISSN 0959-6526

Khoshnava, Seyed Meysam and Rostami, Raheleh and Mohammad Ismail, Mohammad Ismail and Rahmat, Abdul Razak (2018) A cradle-to-gate based life cycle impact assessment comparing the KBFw EFB hybrid reinforced poly hydroxybutyrate biocomposite and common petroleum-based composites as building materials. Environmental Impact Assessment Review, 70 . pp. 11-21. ISSN 0195-9255

King, Edric Hui Wong and Cher, Siang Tan and Chie, Philip Hui Ling (2018) Feasibility of using ISO shipping container to build low cost house in Malaysia. International Journal of Engineering & Technology, 7 (2.29). pp. 933-939. ISSN 2227-524X

Kreishan, Ammar Yaser Soud (2018) The influence of geological and groundwater conditions on the piles driving effects induced against nearby buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Krishnen, Ranjeni (2018) Biogranulation development during treatment of real textile wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Krishnen, Ranjeni (2018) Biogranulation development during treatment of real textile wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kubba, Z. and Fahim Huseien, G. and Sam, A. R. M. and Shah, K. W. and Asaad, M. A. and Ismail, M. and Tahir, M. M. and Mirza, J. (2018) Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars. Case Studies in Construction Materials, 9 . ISSN 2214-5095

L

Latif, Mohd. Talib and Othman, Murnira and Idris, Nurfathehah and Juneng, Liew and Abdullah, Ahmad Makmom and Hamzah, Wan Portia and Khan, Firoz and Nik Sulaiman, Nik Meriam and Jewaratnam, J. and Aghamohammadi, Nasrin and Sahani, Mazrura and Xiang, Chung Jing and Ahamad, Fatimah and Amil, Norhaniza and Darus, Mashitah and Varkkey, Helena and Tangang, Fredolin and Jaafar, Abu Bakar (2018) Impact of regional haze towards air quality in Malaysia: A review. Atmospheric Environment, 177 . pp. 28-44. ISSN 1352-2310

Latifi, Nima and Vahedifard, Farshid and Ghazanfari, Ehsan and A. Rashid, Ahmad Safuan (2018) Sustainable usage of calcium carbide residue for stabilization of clays. Journal of Materials in Civil Engineering, 30 (6). 04018099-04018099. ISSN 0899-1561

Lawan, M. M. and Shek, P. N. and Tahir, M. M. (2018) Comparative study between linear-interpolation and stress-block methods of composite design using Cold-Formed Steel section. International Journal of Engineering and Technology(UAE), 7 (3). pp. 38-41. ISSN 2227-524X

Lee, Hong Pyo and Awang, Abdullah Zawawi and Omar, Wahid and Tiong, P. L. Y. (2018) Derivation of complete stress-strain curve for SSTT-confined high-strength concrete in compression. Journal of Testing and Evaluation, 46 (1). pp. 168-177. ISSN 0090-3973

Lee, Yee Yong and Md. Din, Mohd. Fadhil and Noor, Zainura Zainon and Iwao, Kenzo and Mat Taib, Shazwin and Singh, Lakhveer and Abd. Khalid, Nur Hafizah and Anting, Nickholas and Aminudin, Eeydzah (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement: Journal of the International Measurement Confederation, 118 . pp. 61-72. ISSN 0263-2241

Lee, Yeong Huei and Lim, Ming Han and Lee, Yee Ling and Lee, Yee Yong and Tan, Cher Siang and Mohammad, Shahrin and Ma, Chau Khun (2018) Compressive strength of lightweight foamed concrete with charcoal as a sand replacement. Indian Journal of Engineering and Materials Sciences, 25 (1). pp. 98-108. ISSN 0971-4588

Lim, Kar Sing and Yahaya, Nordin and Valipour, Alireza and Zardasti, Libriati and Azraai, Siti Nur Afifah and Md. Noor, Norhazilan (2018) Mechanical properties characterization and finite element analysis of epoxy grouts in repairing damaged pipeline. Journal of Pressure Vessel Technology, Transactions of the ASME, 140 (6). pp. 1-11. ISSN 0094-9930

Loke, Kok Foong and Abd. Rahman, Norhan and Nazir, Ramli and Sa’ari, Radzuan and Mustaffar, Mushairry (2018) Investigation of aqueous and non-aqueous phase liquid migration in double-porosity soil using digital image analysis. Chemical Engineering Trans actions, 63 . pp. 685-690. ISSN 2283-9216

Low, Wen Pei and Mohd. Din, Mohd. Fadhil and Chang, Fung Lung and Moideen, Siti Nur Fatihah and Lee, Yee Yong (2018) Empirical models of kinetic rate for river treatment analysis of cellulosic materials. Journal of Water Process Engineering, 23 . pp. 257-264. ISSN 2214-7144

M

Mohd. Khori, Nor Khoriha Eliysa and Hadibarata, Tony and S. Elshikh, Mohamed (2018) Triclosan removal by adsorption using activated carbon derived from waste biomass: isotherms and kinetic studies. Journal of The Chinese Chemical Society, 65 (8). pp. 951-959. ISSN 0009-4536

Mohammadhosseini, Hossein and Md. Tahir, Mahmood and Alyousef, Rayed and Alabduljabbar, Hisham and Samadi, Mostafa (2018) Effects of elevated temperatures on residual properties of concrete reinforced with waste polypropylene carpet fibres. Arabian Journal for Science and Engineering, 43 (4). pp. 1673-1686. ISSN 2193-567X

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2018) Eccentricity-based design procedure of confined columns under compression and in-plane bending moment. Measurement: Journal of the International Measurement Confederation, 129 . pp. 11-19. ISSN 0263-2241

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2018) Structural and material performance of geopolymer concrete: A review. Construction and Building Materials, 186 . pp. 90-102. ISSN 0950-0618

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Sarbini, Noor Nabilah and Shahidan, Shahiron (2018) State of the art on pre-tensioning steel straps confinement: Literature review. Malaysian Construction Research Journal, 4 (SI2). pp. 210-220. ISSN 1985-3807

Ma, Chau Khun and Sulaiman, Muhd. Fauzy and Awang, Abdullah Zawawi and Garcia, Reyes and Omar, Wahid and Pilakoutas, Kypros and Lee, Yeong Huei and Mohammad, Shahrin (2018) Design of steel-strapped, high-strength concrete columns subject to unequal end moments. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 171 (4). pp. 273-282. ISSN 0965-0911

Maidin, Anis Farhah (2018) Mitigation of contributing factors to construction accident. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mak, Tuck Kiong (2018) Adoption of Building Information Modelling (BIM) tools during pre-construction stage in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Manzoor, Bilal (2018) Sound absorption capacity of garnet partial replacement in mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Huzir, Nurhamieza and A. Aziz, Md. Maniruzzaman and Ismail, S. B. and Abdullah, Bawadi and NikMahmood, Nik Azmi and Umor, N. A. and Syed Muhammad, Syed Anuar Faua’ad (2018) Agro-industrial waste to biobutanol production: eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94 . pp. 476-485. ISSN 1364-0321

Md. Lani, Nor Hafizi and Syafiuddin, Achmad and Yusop, Zulkifli and Adam, Umussaa'dah and Mat Amin, Mohd. Zaki (2018) Performance of small and large scales rainwater harvesting systems in commercial buildings under different reliability and future water tariff scenarios. Science of the Total Environment, 636 . pp. 1171-1179. ISSN 0048-9697

Md. Lani, Nor Hafizi and Yusop, Zulkifli and Syafiuddin, Achmad (2018) A review of rainwater harvesting in Malaysia: Prospects and challenges. Water (Switzerland), 10 (4). p. 506. ISSN 2073-4441

Md. Tahir, Mahmood and Mohammadhosseini, Hossein and Ngian, Shek Poi and Effendi, Mahmud Kori (2018) I-beam to square hollow column blind bolted moment connection: Experimental and numerical study. Journal of Constructional Steel Research, 148 . pp. 383-398. ISSN 0143-974X

Melan, Aisyahira (2018) Non-linear finite element analysis of steel fibre self compacting reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memon, Ruhal Pervez and Achekzai, Lemar and Mohd. Sam, Abdul Rahman and Abdul Awal, A. S. M. and Memon, Uroosa (2018) Performance of sawdust concrete at elevated temperature. Jurnal Teknologi, 80 (1). pp. 165-171. ISSN 0127-9696

Moayedi, Hossein and Nazir, Ramli (2018) Malaysian experiences of peat stabilization, state of the art. Geotechnical and Geological Engineering, 36 (1). pp. 1-11. ISSN 0960-3182

Moayedi, Hossein and Nazir, Ramli and Mosallanezhad, Mansour and Mohd. Noor, Rozaimi and Khalilpour, Mehrdad (2018) Lateral deflection of piles in a multilayer soil medium. Case study: The Terengganu seaside platform. Measurement: Journal of the International Measurement Confederation, 123 . pp. 185-192. ISSN 0263-2241

Mohamad, E. Tonnizam and Armaghani, D. Jahed and Momeni, E. and Yazdavar, A. H. and Ebrahimi, M. (2018) Rock strength estimation: a PSO-based BP approach. Neural Computing and Applications, 30 (5). pp. 1635-1646. ISSN 0941-0643

Mohamad, Edy Tonnizam and Chang, Shiang Yi and Murlidhar, Bhatawdekar Ramesh and Saad, Rosli (2018) Effect of geological structure on flyrock prediction in construction blasting. Geotechnical and Geological Engineering, 36 (4). pp. 2217-2235. ISSN 0960-3182

Mohamad, Khairul Anuar and Hashim, Noorbaharim and Othman, Ilya Khairanis and Faisal Mohd., Mohd. Syazwan (2018) Assessing the effects of land use conversion on runoff and nutrient load. Malaysian Journal Of Civil Engineering, 30 (3). pp. 442-456. ISSN 2600-9498

Mohamad, Maslina (2018) Characterization of particulate matter at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Arba’i, Nurul Afiqah (2018) Blade performance on the effect of whale wavy leading- edge by using meshfree analysis. Masters thesis, Universiti Teknologi Malaysia.

Mohamed, Roslli Noor and Abd. Khalid, Nur Hafizah and Zamri, Nor Fazlin (2018) A residual flexural tensile strength and flexural toughness of medium strength of steel fibre self-compacting concrete. In: 7th International Graduate Conference on Engineering, Science and Humanities, 13 August 2018 through 15 August 2018, Johor Bahru.

Mohammad, Shahrin and Abd. Rahman, Ahmad Baharuddin and Tan, Cher Siang and Ma, Chau Khun and Lee, Yee Yong and Lee, Yeong Huei (2018) Finite element procedures development for nonlinear steel frame analysis with quasi-static semi-rigid connection. Malaysian Construction Research Journal, 4 (SI2). pp. 221-238. ISSN 1985-3807

Mohammad, Shahrin and Lee, Yeong Huei and Kado, Bishir and Shek, Poi Ngian and Ab. Kadir, Mariyana Aida (2018) Temperature analysis of steel hollow column exposed to standard fire. Journal of Structural Technology, 3 (1). pp. 1-8. ISSN 2581-950X

Mohammad, Shahrin and Lee, Yeong Huei and Shek, Poi Ngian and Kado, Bishir and Ab. Kadir, Mariyana Aida (2018) Experimental investigation on temperature distribution of foamed concrete filled steel tube column under standard fire. In: 4th International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2017, 4 December 2017- 5 December 2017, Langkawi, Malaysia.

Mohammadhosseini, Hossein and Md. Tahir, Mahmood (2018) Durability performance of concrete incorporating waste metalized plastic fibres and palm oil fuel ash. Construction and Building Materials, 180 . pp. 92-102. ISSN 0950-0618

Mohammadhosseini, Hossein and Md. Tahir, Mahmood (2018) Production of sustainable fibre-reinforced concrete incorporating waste chopped metallic film fibres and palm oil fuel ash. Sadhana - Academy Proceedings in Engineering Sciences, 43 (10). ISSN 0256-2499

Mohammadhosseini, Hossein and Md. Tahir, Mahmood and Mohd. Sam, Abdul Rahman (2018) The feasibility of improving impact resistance and strength properties of sustainable concrete composites by adding waste metalized plastic fibres. Construction and Building Materials, 169 . pp. 223-236. ISSN 0950-0618

Mohammadhosseini, Hossein and Md. Tahir, Mahmood and Mohd. Sam, Abdul Rahman and Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa (2018) Enhanced performance for aggressive environments of green concrete composites reinforced with waste carpet fibers and palm oil fuel ash. Journal of Cleaner Production, 185 . pp. 252-265. ISSN 0959-6526

Mohammadhosseini, Hossein and Md. Tahir, Mahmood and Sayyed, M. I. (2018) Strength and transport properties of concrete composites incorporating waste carpet fibres and palm oil fuel ash. Journal of Building Engineering, 20 . pp. 156-165. ISSN 2352-7102

Mohammed Al-Bared, Mohammed Ali and Ayub, Azimah and Mohd. Yunus, Nor Zurairahetty and Harahap, Indra Sati Hamonangan and Marto, Aminaton (2018) Application of demolished concrete material (DCM) in civil engineering structures - a review. International Journal of Civil Engineering and Technology, 9 (11). pp. 2345-2352. ISSN 0976-6308

Mohd. Asharuddin, Syazwani and Othman, Norzila and Mohd. Zin, Nur Shaylinda and Tajarudin, Husnul Azan and Md. Din, Mohd. Fadhil and Kumar, Vicky (2018) Performance assessment of cassava peel starch and alum as dual coagulant for turbidity removal in dam water. International Journal of Integrated Engineering, 10 (4). pp. 185-192. ISSN 2229-838X

Mohd. Hanafi, Fatimah Hafifah (2018) Mushroom cultivation by using agricultural wastes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Hanafi, Fatimah Hafifah and Rezania, Shahabaldin and Mat Taib, Shazwin and Md. Din, Mohd. Fadhil and Yamauchi, Masahito and Sakamoto, Mariko and Hara, Hirofumi and Park, Junboum and Ebrahimi, Shirin Shafiei (2018) Environmentally sustainable applications of agro-based spent mushroom substrate (SMS): an overview. Journal of Material Cycles and Waste Management, 20 (3). pp. 1383-1396. ISSN 1438-4957

Mohd. Kamaruddin, Nurul Hidayah (2018) Effects of waste engine oil on warm reclaimed asphalt mixture. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Kassim, Nazirul Fariq (2018) Pre-contract cost management: a study on risk management and its effect towards costs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Kassim, Nazirul Fariq (2018) Pre-contract cost management:|ba study on risk management and its effect towards costs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Noor, Norzailawati and Rosni, Nur Aulia and Hashim, Mazlan and Abdullah, Alias (2018) Developing land use geospatial indices (LUGI) for sprawl measurement in alpha cities: Case study of Kuala Lumpur, Malaysia. Cities, 82 . pp. 127-140. ISSN 0264-2751

Mohd. Sani, Mohd. Syahrul Hisyam and Muftah, Fadhluhartini and Cher, Siang Tan (2018) A state-of-the-art review on cold-formed steel roof truss system. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 746-756. ISSN 0976-6308

Mohd. Shafferi, Nur Amirah and Abdul Hassan, Norhidayah and Putra Jaya, Ramadhansyah and Mohd. Satar, Mohd. Khairul Idham and Yaacob, Haryati (2018) Effect of kaolin clay on the asphalt mixture under different aging. In: Putrajaya International Built Environment, Technology and Engineering Conference.

Mohd. Yusak, Mohd. Ibrahim and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Mashros, Nordiana and Mohd. Warid, Muhammad Naqiuddin and Ali, Mohamad Idris and Wan Ibrahim, Mohd. Haziman (2018) Physical and chemical properties of cement with nano black rice husk ash. International Conference on Nanoscience and Nanotechnology, 2151 . pp. 1-6. ISSN 0094-243X

Mohsenipour, Morteza and Shahid, Shamsuddin and Chung, Eun-sung and Wang, Xiao-jun (2018) Changing pattern of droughts during cropping seasons of Bangladesh. Water Resources Management, 32 (5). pp. 1555-1568. ISSN 0920-4741

Momeni, Ehsan and Armaghani, Danial Jahed and Fatemi, Seyed Alireza and Nazir, Ramli (2018) Prediction of bearing capacity of thin-walled foundation: a simulation approach. Engineering with Computers, 34 (2). pp. 319-327. ISSN 0177-0667

Moradi, R. and Marto, A. and Rashid, A. and Moradi, M. and Ganiyu, A. and Horpibulsuk, S. (2018) Bearing capacity of soft soil model treated with end-bearing bottom ash columns. Environmental Earth Sciences, 77 (3). p. 100. ISSN 1866-6280

Muda, Khalida and Othman, Mohd. Nor and Mohamad Khir, Mohamad Saiful and Hussein, Norelyza and Abdul Khanan, Mohd. Faisal (2018) Spatial-temporal analysis of PM1NA in southern peninsular Malaysia. In: 2nd International Conference on Architecture and Civil Engineering (ICACE 2018).

Muftah, F. and Sani, M. S. H. M. and Osman, A. R. and Mohammad, S. and Ngian, S. P. (2018) Experimental investigation on box-up cold-formed steel columns in fire. International Journal of GEOMATE, 14 (44). pp. 58-64. ISSN 2186-2982

Muhamad, Majidah (2018) Quality management system for knowledge management inventory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muhamad, Mimi Suliza and Hamidon, Nuramidah and Salim, Mohd. Razman and Yusop, Zulkifli and Woei, Jye Lau and Hadibarata, Tony (2018) Response surface methodology for modeling bisphenol a removal using ultrafiltration membrane system. Water Air and Soil Pollution, 229 (7). p. 222. ISSN 0049-6979

Muhammad, Hamedullah (2018) Optimization of liquefied natural gas bunkering vessel design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muniandy, Josilva M. (2018) Experimental approach for quantifying crop water use and pollutant loading from agricultural plot. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muslim, N. H. and Keyvanfar, A. and Shafaghat, A. and Abdullahi, M. M. and Khorami, M. (2018) Green driver: Travel behaviors revisited on fuel saving and less emission. Sustainability (Switzerland), 10 (2). ISSN 2071-1050

Muslim, Nurul Hidayah and Shafaghat, Arezou and Keyvanfar, Ali and Ismail, Mohammad (2018) Green driver: Driving behaviors revisited on safety. Archives of Transport, 46 (3). pp. 49-78. ISSN 0866-9546

Muttashar, H. L. and Ali, N. B. and Mohd Ariffin, M. A. and Hussin, M. W. (2018) Microstructures and physical properties of waste garnets as a promising construction materials. Case Studies in Construction Materials, 8 . pp. 87-96. ISSN 2214-5095

Muttashar, H. L. and Ariffin, M. A. M. and Hussein, M. N. and Hussin, M. W. and Ishaq, S. B. (2018) Self-compacting geopolymer concrete with spend garnet as sand replacement. Journal of Building Engineering, 15 . pp. 85-94. ISSN 2352-7102

Muttashar, Habeeb Lateef and Mohd. Ariffin, Mohd. Azreen and Hussin, Mohd. Warid and Ishaq, Shafiq (2018) Realisation of enhanced self-compacting geopolymer concrete using spent garnet as sand replacement. Magazine of Concrete Research, 70 (11). pp. 558-569. ISSN 0024-9831

N

Nasrollahpour, Reza (2018) Characteristics of density current dynamics over rough channel beds. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noguchi, S. and Negishi, J. and Yusop, Z. and Kosugi, Y. and Shamsuddin, Siti Aisah and Tani, M. (2018) Throughfall at an abandoned skid trail in a tropical rain forest in Peninsular Malaysia. Japan Agricultural Research Quarterly, 52 (1). pp. 63-75. ISSN 0021-3551

Nainar, A. and Tanaka, N. and Bidin, K. and Annammala, K. V. and Ewers, R. M. and Reynolds, G. and Walsh, R. P. D. (2018) Hydrological dynamics of tropical streams on a gradient of land-use disturbance and recovery: A multi-catchment experiment. Journal of Hydrology, 566 . pp. 581-594. ISSN 0022-1694

Nashwan, M. S. and Shahid, S. and Chung, E. S. and Ahmed, K. and Song, Y. H. (2018) Development of climate-based index for hydrologic hazard susceptibility. Sustainability (Switzerland), 10 (7). ISSN 2071-1050

Nashwan, Mohamed Salem and Ismail, Tarmizi and Ahmed, Kamal (2018) Flood susceptibility assessment in Kelantan river basin using copula. International Journal of Engineering & Technology, 7 (2). pp. 584-590. ISSN 2227-524X

Nasrollahi, M. and Khosravi, H. and Moghaddamnia, A. and Malekian, A. and Shahid, S. (2018) Assessment of drought risk index using drought hazard and vulnerability indices. Arabian Journal of Geosciences, 11 (20). p. 606. ISSN 1866-7511

Nazifa, Tasnia Hassan and Habba, Nurmia and Salmiati, Salmiati and Aris, Azmi and Hadibarata, Tony (2018) Adsorption of procion red MX-5B and crystal violet dyes from aqueous solution onto corncob activated carbon. Journal of the Chinese Chemical Society, 65 (2). pp. 259-270. ISSN 0009-4536

Nazir, Ramli and Irsyam, Masyhur and Alatas, Idrus Muhamad and Simatumpang, Pintor T. (2018) Argillaceous rock properties changes due to the weathering process. In: Ramli Nazir, Idrus Muhamad Alatas, Masyhur Irsyam, Proceeding 20Th SEAGC- 3Th AGSSEA Conference In Conjunction With22Nd Annual Indonesian National Conference On Geotechnical Engineering, Jakarta, Indonesia.

Nazir, Ramli and Moayedi, Hossein and Subramaniam, Puspanathan and Gue, See-Sew (2018) Application and design of transition piled embankment with surcharged prefabricated vertical drain intersection over soft ground. Arabian Journal for Science and Engineering, 43 (4). pp. 1573-1582. ISSN 2193-567X

Nazir, Ramli and Ng, Kok Shien and Zukri, Azhani (2018) The settlement evaluation of improved soft clay using leca replacement technique. In: Proceeding 20Th SEAGC- 3Th AGSSEA Conference In Conjunction With22Nd Annual Indonesian National Conference On Geotechnical Engineering, Jakarta, Indonesia.

Nejat, Payam (2018) Two-sided windcatcher in low wind speed environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nejat, Payam and Jomehzadeh, Fatemeh and Hussen, Hasanen Mohammed and Calautit, John Kaiser and Abd. Majid, Muhd. Zaimi (2018) Application of wind as a renewable energy source for passive cooling through windcatchers integrated with wing walls. Energies, 11 (10). pp. 1-23. ISSN 1996-1073

Nguyen, Linh T. T. and Bay, Vo and Nguyen, Loan T. T. and Philippe, Fournier Viger and Selamat, Ali (2018) ETARM: an efficient top-k association rule mining algorithm. Applied Intelligence, 48 (5). pp. 1148-1160. ISSN 0924-669X

Nik Soh, Nik Mohd. Zaini and Akasah, Zainal Abidin and Dullah, Hayana and Abdul Aziz, Astimar and Aminudin, Eeydzah (2018) Alkaline treatments on EFB fibre: The effect on mechanical-physical properties and fibre-cement hydration rate. Malaysian Construction Research Journal, 4 (SI2). pp. 117-128. ISSN 1985-3807

Nikmatin, S. and Hermawan, B. and Irmansyah, I. and Indro, M. N. and Kueh, A. B. H. and Syafiuddin, A. (2018) Evaluation of the performance of helmet prototypes fabricated from acrylonitrile butadiene styrene composites filled with natural resource. Materials, 12 (1). ISSN 1996-1944

Noor, M. and Ismail, T. and Chung, E. S. and Shahid, S. and Sung, J. H. (2018) Uncertainty in rainfall intensity duration frequency curves of Peninsular Malaysia under changing climate scenarios. Water (Switzerland), 10 (12). ISSN 2073-4441

Noor, Muhammad and Ismail, Tarmizi (2018) Downscaling of daily average rainfall of kota bharu kelantan, Malaysia. Malaysian Journal Of Civil Engineering, 30 (1). pp. 13-22. ISSN 1823-7843

O

Omer, Joma H. M. and Kueh, Ahmad Beng Hong and Shek, Poi Ngian (2018) Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam-column with partially welded flush end-plate connection. Advances in Structural Engineering, 21 (12). pp. 1777-1791. ISSN 1369-4332

Ojoko, Edo Oga and Osman, Mohd. Hanim and Abdul Rahman, Ahmad Baharuddin and Bakhary, Norhisham (2018) Evaluating the Critical Success Factors of Industrialised Building System Implementation in Nigeria: The Stakeholders' Perception. International Journal of Built Environment and Sustainability, 5 (2). pp. 127-133. ISSN 1511-1369

Ojoko, Edo Oga and Osman, Mohd. Hanim and Abdul Rahman, Ahmad Baharuddin and Bakhary, Norhisham (2018) Evaluating the critical success factors of industrialised building system implementation in Nigeria: the stakeholders’ perception. International Journal of Built Environment and Sustainability, 5 (2). pp. 127-133. ISSN 2289-8948

Oluwasola, E. A. and Hainin, M. R. and Idham, M. K. and Abayomi, M. (2018) Workability and rheological properties of EVA-modified bitumen compared with PG 76 binder. Jurnal Teknologi, 80 (4). pp. 117-124. ISSN 0127-9696

Omar, Ahmad Hanis and Muda, Khalida and Toemen, Susilawati and Sulaiman, Siti Fadziana and Zaidi, Nur Syamimi and Affam, Augustine Chioma (2018) Study on the effect of a static magnetic field in enhancing initial state of biogranulation. Journal of Water Supply: Research and Technology - AQUA, 67 (5). pp. 484-489. ISSN 0003-7214

Othman, A. and Ismail, S. and Yahya, K. and Ahmad, M. H. (2018) Critical success factors in implementing knowledge management in consultant firms for Malaysian construction industry. Management Science Letters, 8 (5). pp. 305-316. ISSN 1923-9335

Othman, Faiz Maniza (2018) A study of best practice of scheduled outage program in increasing plant performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Othman, Noor Aini (2018) The effectiveness of pvd installation in bauxite residue soil by using plaxis 2d for settlements analysis. Masters thesis, Universiti Teknologi Malaysia.

P

Pour, Sahar Hadi and Shahid, Shamsuddin and Chung, Eun Sung and Wang, Xiao Jun (2018) Model output statistics downscaling using support vector machine for the projection of spatial and temporal changes in rainfall of Bangladesh. Atmospheric Research, 213 . pp. 149-162. ISSN 0169-8095

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd. Rosli and Mohd. Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd. Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd. Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Wan Ibrahim, Mohd. Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd. Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

R

Rahman, N. A. and Foong, L. K. and Nazir, R. and Lewis, R. W. (2018) Vibration effect influence upon non-aqueous phase liqumigration in double-porosity soil. Geologia Croatica, 71 (3). pp. 163-171. ISSN 1330-030X

Raja Muhammad Rooshdi, Raja Rafidah and Majid, M. A. and Sahamir, Shaza Rina and Ismail, Noor Akmal Adillah (2018) Relative importance index of sustainable design and construction activities criteria for green highway. Chemical Engineering Transactions, 63 . pp. 151-156. ISSN 2283-9216

Rasli, Fateen Nabilla and Kanniah, Kasturi Devi (2018) Green corridors for liveable and walkable city: A case of Kuala Lumpur. Chemical Engineering Transactions, 63 . pp. 391-396. ISSN 2283-9216

Rehman, Hafeezur and Ali, Wahid and Naji, Abdul Muntaqim and Kim, Jung Joo and Abdullah, Rini Asnida and Yoo, Han Kyu (2018) Review of rock-mass rating and tunneling quality index systems for tunnel design: development, refinement, application and limitation. Applied Sciences-Basel, 8 (8). p. 1250. ISSN 2076-3417

Rezania, Shahabaldin and Park, Junboum and Md. Din, Mohd. Fadhil and Mat Taib, Shazwin and Talaiekhozani, Amirreza and Yadav, Krishna Kumar and Kamyab, Hesam (2018) Microplastics pollution in different aquatic environments and biota: a review of recent studies. Marine Pollution Bulletin, 133 . pp. 191-208. ISSN 0025-326X

Romali, N. S. and Yusop, Z. and Ismail, A. Z. (2018) Application of HEC-RAS and Arc GIS for floodplain mapping in Segamat town, Malaysia. International Journal of GEOMATE, 15 (47). pp. 7-13. ISSN 2186-2982

Romali, N. S. and Yusop, Z. and Sulaiman, M. and Ismail, Z. (2018) Flood risk assessment: a review of flood damage estimation model for Malaysia. Jurnal Teknologi, 80 (3). pp. 145-153. ISSN 0127-9696

Roudi, A. M. and Chelliapan, S. and Mohtar, W. H. M. W. and Kamyab, H. (2018) Prediction and optimization of the Fenton process for the treatment of landfill leachate using an artificial neural network. Water (Switzerland), 10 (5). ISSN 2073-4441

S

Shariati, M. and Tahir, M. and Wee, Tee Chin and Shah, S. and Jalali, A. and Abdullahi, M. M. and Khorami, M. (2018) Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections. Engineering Failure Analysis, 85 . pp. 149-166. ISSN 1350-6307

Shoushtari, Abdollah Vaez and Adnan, Azlan and Zare, Mehdi (2018) Ground motion prediction equations for distant subduction interface earthquakes based on empirical data in the Malay Peninsula and Japan. Soil Dynamics and Earthquake Engineering, 109 . pp. 339-353. ISSN 0267-7261

Saad, Nurul Alia (2018) Characterization of diesel exhaust gases emission at construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saadon, Syaiful Akhmal and Muhd. Yunus, Salmiati and Yusoff, Abdull Rahim and Yusop, Zulkifli and Azman, Shamila and Uy, Davin and Syafiuddin, Achmad (2018) Heated laterite as a low-cost adsorbent for arsenic removal from aqueous solution. Malaysian Journal of Fundamental and Applied Sciences, 14 (1). pp. 1-8. ISSN 2289-5981

Sachindra, D. A. and Ahmed, K. and Rashid, Md. Mamunur and Shahid, S. and Perera, B. J. C. (2018) Statistical downscaling of precipitation using machine learning techniques. Atmospheric Research, 212 . pp. 240-258. ISSN 0169-8095

Sachindra, D. A. and Ahmed, K. and Shahid, S. and Perera, B. J. C. (2018) Cautionary note on the use of genetic programming in statistical downscaling. International Journal Of Climatology, 38 (8). pp. 3449-3465. ISSN 0899-8418

Sadeghipour Chahnasir, E. and Zandi, Y. and Shariati, M. and Dehghani, E. and Toghroli, A. and Tonnizam Mohamad, E. and Shariati, A. and Safa, M. and Wakil, K. and Khorami, M. (2018) Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors. Smart Structures and Systems, 22 (4). pp. 413-424. ISSN 1738-1584

Saeed Far, Soheil and Abd. Wahab, Ahmad Khairi and Harun, Sobri (2018) Determination of Significant Wave Height Offshore of the Federal Territory of Labuan (Malaysia) Using Generalized Pareto Distribution Method. Journal of Coastal Research, 34 (4). pp. 892-899. ISSN 0749-0208

Sahamir, Shaza Rina and Zakaria, Rozana and Raja Muhd. Rooshdi, Raja Rafidah and Adenan, Mohamad Asfia and Shamsuddin, Siti Mazzuana and Abidin, Nur Izieadiana and Ismail, Noor Akmal Adillah and Aminudin, Eeydzah (2018) Multi-criteria decision analysis for evaluating sustainable lifts design of public hospital buildings. Chemical Engineering Transactions, 63 . pp. 199-204. ISSN 2283-9216

Sahraei, Mohammad Ali (2018) Modelling of traffic control delays at priority junctions using artificial neural network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salem, Golam Saleh Ahmed and Kazama, So and Shahid, Shamsuddin and Dey, Nepal C. (2018) Impacts of climate change on groundwater level and irrigation cost in a groundwater dependent irrigated region. Agricultural Water Management, 208 . pp. 33-42. ISSN 0378-3774

Salman, Saleem A. and Shahid, Shamsuddin and Ismail, Tarmizi and Ahmed, Kamal and Wang, Xiaojun (2018) Selection of climate models for projection of spatiotemporal changes in temperature of Iraq with uncertainties. Atmospheric Research, 213 . pp. 509-522. ISSN 0169-8095

Septiropa, Zamzami and Osman, Mohd. Hanim and Abd. Rahman, Ahmad Baharuddin and Mohd. Ariffin, Mohd. Azreen and Huda, Miftachul and Maseleno, Andino (2018) Profile of cold-formed steel for compression member design a basic combination performance. International Journal of Engineering & Technology, 7 (2.27). pp. 284-290. ISSN 2227-524X

Shaffruddeen, Muhammad Shahir (2018) Measurement of productivity rate of drainage trench excavation using lean strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shiru, M. S. and Shahid, S. and Alias, N. and Chung, E. S. (2018) Trend analysis of droughts during crop growing seasons of Nigeria. Sustainability (Switzerland), 10 (3). ISSN 2071-1050

Shoushtari, Abdollah Vaez and Adnan, Azlan and Zare, Mehdi (2018) Incorporating the local faults effects in development of seismic ground-motion hazard mapping for the Peninsular Malaysia region. Journal of Asian Earth Sciences, 163 . pp. 194-211. ISSN 1367-9120

Siang, Jee and Lim, Meng Hee and Leong, Mohd. Salman (2018) Review of vibration-based energy harvesting technology: Mechanism and architectural approach. International Journal of Energy Research, 42 (5). pp. 1866-1893. ISSN 0363-907X

Sohaei, Houman and Namazi, Eshagh and Marto, Aminaton (2018) Control of pile movements induced by tunnelling using micropiles. International Journal of Physical Modelling in Geotechnics, 18 (4). pp. 191-207. ISSN 1346-213X

Sohaili, J. and Kar Yan, L. and Muniyandi, S. K. and Mohamad, S. S. (2018) Urban Heat Island mitigation using green roof approach. Jurnal Teknologi, 80 (3). pp. 61-68. ISSN 0127-9696

Soltanzadeh, Gholamreza and Osman, Hanim and Vafaei, Mohammadreza and Vahed, Yousef Karimi (2018) Seismic retrofit of masonry wall infilled RC frames through external post-tensioning. Bulletin of Earthquake Engineering, 16 (3). pp. 1487-1510. ISSN 1570-761X

Sung, J. H. and Chung, E. S. and Shahid, S. (2018) Reliability-Resiliency-Vulnerability approach for drought analysis in South Korea using 28 GCMs. Sustainability (Switzerland), 10 (9). ISSN 2071-1050

Syafiuddin, A. and Salmiati, S. and Hadibarata, T. and Kueh, A. B. H. and Salim, M. R. and Zaini, M. A. A. (2018) Silver nanoparticles in the water environment in Malaysia: inspection, characterization, removal, modeling, and future perspective. Scientific Reports, 8 (1). ISSN 2045-2322

Syafiuddin, A. and Salmiati, Salmiati and Hadibarata, T. and Beng Hong Kueh, A. and Razman Salim, M. (2018) Novel weed-extracted silver nanoparticles and their antibacterial appraisal against a rare bacterium from river and sewage treatment plan. Nanomaterials, 8 (1). ISSN 2079-4991

Syafiuddin, Achmad and Salmiati, Salmiati and Jonbi, Jonbi and Fulazzaky, Mohamad Ali (2018) Application of the kinetic and isotherm models for better understanding of the behaviors of silver nanoparticles adsorption onto different adsorbents. Journal of Environmental Management, 218 . pp. 59-70. ISSN 0301-4797

T

Talebi, E. and Tahir, M. M. and Zahmatkesh, F. and Kueh, A. B. H. and Said, A. M. (2018) Fire resistance of a damaged building employing buckling restrained braced system. Advanced Steel Construction, 14 (1). pp. 1-21. ISSN 1816-112X

Tan, Cher Siang and Alain, Nussbaumer (2018) Structural feasibility of iso shipping containers for core-dwelling housing. In: Engineering the Developing World IABSE2018 Kuala Lumpur.

Tan, Cher Siang and Nussbaumer, Alain and Ling, Philip Chie Hui (2018) Container shelter for post-disaster reconstruction. In: International Conference on Durability Of Building and Infrastructures (Durabi2018).

Tan, Sheng Hua and Wong, Shi Wei and Chin, Du Jia and Lee, Min Lee and Ong, Ying Hui and Chong, Siaw Yah and Kassim, Azman (2018) Soil column infiltration tests on biomediated capillary barrier systems for mitigating rainfall-induced landslides. Environmental Earth Sciences, 77 (16). p. 589. ISSN 1866-6280

Tay, Lay Ting (2018) Performance of double layer porous asphalt incorporating coconut shell and coconut fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Theam, Yiew Ooi and Ee, Ling Yong and Md. Din, Mohd. Fadhil and Rezania, Shahabaldin and Aminudin, Eeydzah and Chelliapan, Shreeshivadasan and Abdul Rahman, Azlan and Park, Junboum (2018) Optimization of aluminium recovery from water treatment sludge using Response Surface Methodology. Journal of Environmental Management, 228 . pp. 13-19. ISSN 0301-4797

U

Ullah, Rafiq (2018) Seismic analysis of transmission tower under low to moderate earthquake loading. Masters thesis, Universiti Teknologi Malaysia.

Umar, Sarehati and Bakhary, Norhisham and Z. Abidin, A. R. (2018) Response surface methodology for damage detection using frequency and mode shape. Measurement, 115 (NA). pp. 258-268. ISSN 0263-2241

V

Vafaei, M. and Alih, S. C. (2018) Seismic vulnerability of air traffic control towers. Natural Hazards, 90 (2). pp. 803-822. ISSN 0921-030X

Vafaei, M. and Alih, S. C. and Shad, H. and Falah, A. and Halim, N. H. F. A. (2018) Prediction of strain values in reinforcements and concrete of a RC frame using neural networks. International Journal of Advanced Structural Engineering, 10 (1). pp. 29-35. ISSN 2008-3556

W

Wan Azahar, Wan Nur Aifa (2018) Binder characterization and performance of asphaltic concrete modified with waste cooking oil. PhD thesis, Universiti Teknologi Malaysia.

Wang, Xiao Jun and Zhang, Jiajia and Shahid, Shamsuddin and Bi, Shou hai and Elmahdi, Amgad and Liao, Chuan and Li, You de (2018) Forecasting industrial water demand in Huaihe River Basin due to environmental changes. Mitigation and Adaptation Strategies for Global Change, 23 (4). pp. 469-483. ISSN 1381-2386

Wang, Xiao-Jun and Zhang, Jian-Yun and Shahid, Shamsuddin and Xie, Wei and Du, Chao-Yang and Shang, Xiao-Chuan and Zhang, Xu (2018) Modeling domestic water demand in Huaihe River Basin of China under climate change and population dynamics. Environment, Development and Sustainability, 20 (2). pp. 911-924. ISSN 1387-585X

Wang, Xiao-jun and Zhang, Jian-yun and Shamsuddin, Shahid and Lang, Yu and Chen, Xie and Wang, Bing-xuan and Xu, Zhang (2018) Domestic water demand forecasting in the Yellow River basin under changing environment. International Journal of Climate Change Strategies and Management, 10 (3). pp. 379-388. ISSN 1756-8692

Wei, Xing and Shariati, M. and Zandi, Y. and Pei, Shiling and Jin, Zhibin and Gharachurlu, S. and Abdullahi, M. M. and Tahir, M. M. and Khorami, M. (2018) Distribution of shear force in perforated shear connectors. Steel and Composite Structures, 27 (3). pp. 389-399. ISSN 1229-9367

Wong, Chee Loong and Yusop, Z. and Venneker, Raymond and Uhlenbrook, Stefan (2018) Effects of Topographic Heterogeneity on Coarse Resolution Grid-Based Runoff Simulation-Assessment for Three River Basins in Peninsular Malaysia. Environmental Modeling & Assessment, 23 (3). pp. 277-288. ISSN 1420-2026

X

Xiao, Wang and Jiajia, Zhang and Juan, Gao and Shamsuddin, Shahid and Xing, hui Xia and Zhi, Geng and Li, Tang (2018) The new concept of water resources management in China: ensuring water security in changing environment. Environment, Development and Sustainability, 20 (2). pp. 897-909. ISSN 1387-585X

Y

Yaowarat, Teerasak and Horpibulsuk, Suksun and Arulrajah, Arul and Mirzababaei, Mehdi and A. Rashid, Ahmad Safuan (2018) Compressive and flexural strength of polyvinyl alcohol-modified pavement concrete using recycled concrete aggregates. Journal of Materials in Civil Engineering, 30 (4). 04018046-04018046. ISSN 0899-1561

Yaacob, H. and Chang, F. L. and Jaya, R. P. and Hainin, M. R. and Rashid, A. S. A. and Hassan, N. A. (2018) Assessing the bond strength of hot mix asphalt pavement for wearing and binder courses. International Journal of Technology, 9 (5). pp. 925-935. ISSN 2086-9614

Yamusa, Yamusa Bello and Ahmad, Kamarudin and Abd. Rahman, Norhan and Sa’ari, Radzuan and Yunus, Nor Zurairahetty and Rashid, Ahmad (2018) Volumetric shrinkage of compacted soil liner for sustainable waste landfill. Chemical Engineering Transactions, 63 . pp. 613-618. ISSN 2289216

Yamusa, Yamusa Bello and Hezmi, Muhammad Azril and Ahmad, Kamarudin and Kassim, Khairul Anuar (2018) Using soil water characteristic curve in computing unsaturated hydraulic conductivity of compacted tropical soil. ARPN Journal of Engineering and Applied Sciences, 13 (17). pp. 4765-4770. ISSN 1819-6608

Yaseen, Z. M. and Ehteram, M. and Sharafati, A. and Shahid, S. and Al-Ansari, N. and El-Shafie, A. (2018) The integration of nature-inspired algorithms with Least Square Support Vector regression models: application to modeling river dissolved oxygen concentration. Water (Switzerland), 10 (9). ISSN 2073-4441

Yaseen, Zaher Mundher and Awadh, Salih Muhammad and Sharafati, Ahmad and Shahid, Shamsuddin (2018) Complementary data-intelligence model for river flow simulation. Journal of Hydrology, 567 . pp. 180-190. ISSN 0022-1694

Yip, C. C. and Marsono, A. K. and Wong, J. Y. and Lee, S. C. (2018) Seismic performance of scaled IBS block column for static nonlinear monotonic pushover experimental analysis. Jurnal Teknologi, 80 (1). pp. 89-106. ISSN 0127-9696

Yong, Ee Ling and Abdul Halim, Khairunnisa (2018) Integrating two-stage up-flow anaerobic sludge blanket with a single-stage aerobic packed-bed reactorfor raw palm oil mill effluent treatment. Malaysian Journal of Sustainable Agriculture, 1 (1). pp. 15-18. ISSN 2521-294X

Z

Zahmatkesh, F. and Osman, M. H. and Talebi, E. and Kueh, A. and Tahir, M. (2018) Experimental study on the performance of slant end-plate connections at elevated temperature. Advanced Steel Construction, 14 (1). pp. 57-72. ISSN 1816-112X

Zaidi, N. S. and Muda, K. and Hussein, N. and Sillanpaa, M. (2018) Potential inhibition of filamentous microorganisms in sludge bulking by static magnetic field. International Journal of Engineering and Technology(UAE), 7 (3). ISSN 2227-524X

Zainal, Nurfarahin and Arifin, Hanis Hazirah and Zardasti, Libriati and Yahaya, Nordin and Lim, Kar Sing and Md. Noor, Norhazilan (2018) Mechanical properties of graphene-modified epoxy grout for pipeline composite repair. International Journal of Integrated Engineering, 10 (4). pp. 176-184. ISSN 2229-838X

Zainal Abidin, Ahmad Razin and Mustafa, Shaymaa and Abdul Aziz, Zainal and Ismail, Kamarudin (2018) Mathematical model for steady state subsea cable laying problem. Matematika, 34 (2). pp. 173-186. ISSN 0127-9602

Zainal Abidin, Muhd. Nor Ridhwan (2018) Advantages and effectiveness of project implementation through nominated sub-contractor in JKR building construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Zakaria, N. M. and Hassan, M. K. and Ibrahim, A. N. H. and Rosyidi, S. A. P. and Yusoff, N. I. M. and Mohamed, A. A. and Hassan, N. (2018) The use of mixed waste recycled plastic and glass as an aggregate replacement in asphalt mixtures. Jurnal Teknologi, 80 (1). pp. 79-88. ISSN 0127-9696

Zakaria, Nur Hana (2018) Bond stress between steel deformed bars confined with steel fiber reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Zamri, Nor Fazlin and Mohamed, Roslli Noor and A. Khalid, NurHafizah and Kang, Yong Chiat (2018) The effects of inclined shear reinforcement in reinforced concrete beams. Malaysian Journal Of Civil Engineering, 30 (1). pp. 85-96. ISSN 2600-9498

Zandi, Yousef and Shariati, Mahdi and Marto, Aminaton and Xing, Wei and Karaca, Zeki and Dao, Duy Kien and Toghroli, Ali and Hashemi, Mir Heydar and Sedghi, Yadollah and Wakil, Karzan and Khorami, Majid (2018) Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake. Steel and Composite Structures, 28 (4). pp. 439-447. ISSN 1229-9367

Zardasti, Libriati and Valipour, Alireza and Md. Noor, Norhazilan and Yahaya, Nordin (2018) Prioritization of threat factors for pipeline operator's reputation sustainability from customer's perspectives. Journal of Engineering Science and Technology, 13 (3). pp. 665-681. ISSN 1823-4690