Universiti Teknologi Malaysia Institutional Repository

Evaluation of tensile strength of Brazilian test under solid and ring disks using finite element analysis

Abdullah, Rini Asnida and Tsutsumi, Takashi (2018) Evaluation of tensile strength of Brazilian test under solid and ring disks using finite element analysis. Sains Malaysiana, 47 (4). pp. 683-689. ISSN 0126-6039

Full text not available from this repository.

Official URL: http://www.ukm.my/jsm/english_journals/vol47num4_2...

Abstract

The tensile strength of intact rock materials has been determined by indirect method more frequent than the direct method. The most commonly used indirect method is Brazilian test. Stress and deformability undergo during the test reflected by geometry shape of the samples with respect to the different diameter ratio. This study focuses on influence of geometry shape in solid and ring disk with different diameter ratio on the stress distribution and deformations within sandstone subjected to indirect tensile loading by Brazilian test. Then, the finite element method in RS2 software was utilised to simulate and gain in depth understanding the behaviour of Brazilian test. The analysis shown that the maximum tensile strength in a ring disk with diameter ratio of 0.1 is three times higher than in solid disk. Meanwhile, as the diameter ratio of ring disk increases, it produces lower tensile strength. The numerical simulation also has successfully illustrated the shear failure which observed near the loading platen of solid disk during Brazilian test. The finite element analysis utilised in this research has successfully enables the stress distribution and deformation behaviour of the rock under tension to be studied closely.

Item Type:Article
Uncontrolled Keywords:finite element method, ring test
Subjects:T Technology > TA Engineering (General). Civil engineering (General)
Divisions:Civil Engineering
ID Code:84118
Deposited By: Siti Nor Hashidah Zakaria
Deposited On:16 Dec 2019 03:20
Last Modified:16 Dec 2019 03:20

Repository Staff Only: item control page