Items where Division is "Civil Engineering" and Year is 2011

A

Abd. Kadir, Siti Hajar (2011) Construction safety management in Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Latif, Mukhzani (2011) Establishment of value management framework for implementation in JKR construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Majid, Muhd Zaimi (2011) Construction information system for executive management monitoring work progress. In: 2011 International Symposium On Mechanical Science And Technology.

Abd. Majid, Muhd Zaimi (2011) Optimum internal circulation layout in high-rise building for safe evacuation during fire emergency : a research proposal. In: International Construction Business & Management Symposium (ICBMS 2011).

Abd. Majid, Muhd. Zaimi (2011) Conceptual intelligent building (IB) design framework to improve the level of user comfort towards sustainable energy efficient strategies. In: International Conference On Sustainable Development.

Abd. Majid, Muhd. Zaimi (2011) Executive information site management system for monitoring project performance: system requirement study. In: International Conference On Sustainable Development.

Abd. Majid, Muhd. Zaimi (2011) Investigation on the needs of computerized information systems in construction site progress monitoring and control for Malaysia. In: International Construction Business & Management Symposium (Icbms 2011).

Abd. Majid, Muhd. Zaimi and Lamit, Hasannudin and Keyvanfar, Ali and Shafghat, Arezou (2011) Future building performance factors in regional development towards energy efficient travel plant. In: International Construction Business & Management Symposium (Icbms 2011).

Abd. Majid, Muhd. Zaimi and Lamit, Hasannudin and Keyvanfar, Ali and Shafaghat, Arezou (2011) A proposal for prototype package of green affordable home: using fast track wall system. In: International Conference On Sustainable Development.

Abdllah Sani, Zarifah Sofia (2011) Safety culture on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Awal, A. S. M. and Hussin, M. Warid (2011) Effect of palm oil fuel ash in controlling heat of hydration of concrete. Procedia Engineering, 14 . pp. 2650-2657. ISSN 1877-7058

Abdul Hamid, Abdul Rahim and Md Yusof, Aminah (2011) The employment of foreign workers at constructions sites. In: 2nd International Conference on Construction and Project Management, 16-18 September 2011, Singapore.

Abdul Mulok, Sabri (2011) Flood hazard map for urbanised area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Raha (2011) Effects of u-turn facility on traffic operational perfomance on multinale divided highway - a literature review. In: Curtin University Science & Technology International Conference (CUTSE 2011).

Abdul Rahman, Siti Fatimah and Ismail, Mohammad and Muhammad, Bala and Md. Noor, Norhazilan and Bakhtiar, Hazri (2011) Monitoring corrosion of reinforcement bar using capacitive sensor at different concrete cover depth. Malaysian Journal of Civil Engineering, 23 (2). pp. 1-11. ISSN 1823-7843

Abdullah, Arham (2011) Concrete chimney demolition methods (case study: Perai TNB power station chimney). In: 1st International Construction Business & Management Symposium 2011.

Abdullah, Nor Hafizah Hanis (2011) Empirical correlation for estimation of unsaturated soil shear strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Redzuan and Easterling, W. S. (2011) Elemental bending test and modeling of shear bond in composite slabs. In: Composite Construction in Steel and Concrete VI - Proceedings of the 2008 Composite Construction in Steel and Concrete Conference. American Society of Civil Engineers, Virginia, USA, pp. 138-150. ISBN 978-078441142-1

Abdullahi, Mu'azu Mohammed (2011) Tree-induced deformation in unsaturated soils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulrahman, A. S. and Ismail, Mohammad and Hussain, Mohammad Sakhawat (2011) Corrosion inhibitors for steel reinforcement in concrete: a review. Scientific Research and Essays, 6 (20). pp. 4152-4162. ISSN 1992-2248

Abdulridha, Ammar Ali (2011) Fatigue life of hot mix asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abolfathi, Soroush (2011) Study of the wave run up in the swash zone by use of M5' model tree algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ade, Bilau Abdulquadri (2011) The development of small and medium sized construction firms in Nigeria using absorptive capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adn, A. and Tiong, P. L. Y. and Suryat, J. and Ghazali, M. Z. M. and Malek, K. A. (2011) Seismic base isolation of steel frame structure by hollow rubber bearings. Gazi University Journal of Science, 24 (4). pp. 841-853. ISSN 1303-9709

Adnan, Azlan (2011) New seismic hazard map of Peninsular Malaysia using next generation attenuations. In: 2011 5th Annual Meeting.

Adnan, Azlan and Baharudin, Noor Hasnida and Kasa, Anuar and Chik, Zamri and Taha , Mohd. Raihan (2011) Preparation of residual soil samples by using modified method. In: Advanced Materials Research. Elsevier, Guangzhou, pp. 4470-4473. ISBN 978-087849206-0

Adnan, Azlan and Vafaei, Mohammadreza and Yadollahi, Mohammadreza (2011) Seismic damage detection using pushover analysis. In: Advanced Materials Research. Trans Tech Publications, Kunming, pp. 2496-2499. ISBN 978-303785139-5

Ahmad, Anees (2011) Influence of staffing practices on effective project management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, J. and Abdul Rahman, M. Y. and Hainin, Mohd. Rosli (2011) Rutting evaluation of dense graded hot mix asphalt mixture. International Journal of Engineering & Technology, 11 (5). pp. 56-60. ISSN 2077-1185

Ahmad, Kamarudin and Taha, Mohd. Raihan and Kassim, Khairul Anuar (2011) Electrokinetic treatment on a tropical residual soil. Proceedings of the Institution of Civil Engineers: Ground Improvement, 164 (1). pp. 3-13. ISSN 1755-0750

Ahmad, Yusof (2011) Computer simulation of timber beams strengthened using glass fiber reinforced polymer. ICASTOR Journal Of Engineering, 4 (2). pp. 201-218. ISSN 0974-407X

Ahmad, Yusof (2011) Ductility of timber beams strengthened using glass fiber reinforced polymer bars. In: The 3rd International Conference Of European Asian Civil Engineering Forum (Eacef).

Ahmad Shakri, Md Rajuna and Mohd Said, Mohd Ismid and Zakaria, Rozana and Munikanan, Vikneswaran (2011) Sustainable neighbourhood elements model (SNES model). In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Ahmad Shakri, Md. Rajuna and Zakaria, Rozana and Abd. Samad, Badrul Hisham (2011) Determining relationship between physical health care settings and mycobacterium tuberculosis. Applied Mechanics and Materials, 90-93 . pp. 2460-2465. ISSN 1660-9336

Ahmed Mukred, Jameel Abdulla and Ibrahim, Zuwairie and Ismail, Ibrahim and Mokhtar, Norrima (2011) A binary particle swarm optimization approach to optimize assembly sequence planning. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Al-Amri, Abdullah and Salim, Mohd. Razman and Aris, Azmi (2011) The effect of drastic temperature changes on the performance of MBR treating municipal wastewater. Water Science and Technology, 64 (7). pp. 1398-1405. ISSN 0273-1223

Alhassan, Hashim Mohammed and Ben Edigbe, Johnnie (2011) Effect of rainfall intensity variability on highway capacity. European Journal of Scientific Research, 49 (1). pp. 18-27. ISSN 1450-216X

Alhassan, Hashim Mohammed and Ben Edigbe, Johnnie (2011) Highway capacity prediction in adverse weather. Journal of Applied Sciences, 11 (12). pp. 2193-2199. ISSN 1812-5654

Ali, Bayan Anwer and Saad, Sariffuddin and Osman, Mohd. Hanim and Ahmad, Yusof (2011) Finite element analysis of cold formed steel connections. International Journal of Engineering (IJE), 5 (2). pp. 185-193. ISSN 1025-2495

Ali, N. B. M. and Amani, N. and Abd. Samat, Roslida (2011) Developing a framework of economic model for building component lifecycle repair. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 3893 -3897. ISBN 978-303785139-5

Ali, Nazri (2011) Effects of induced vegetative moisture uptake in an unsaturated. In: 5th Asia-Pacific Conference On Unsaturated Soils (Ap-Unsat 2011).

Alia Damayanti, Alia Damayanti (2011) Hybrid membrane bioreactor for biodegradation and biofouling reduction of palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alkarimiah, Rosnani and Mahat, Siti Baizura and Muhammad Yuzir, Muhamad Ali and Md. Din, Mohd. Fadhil and Chelliapan, Shreeshivadasan (2011) Performance of an innovative multi-stage anaerobic reactor during start-up period. African Journal of Biotechnology, 10 (54). pp. 11294-11302. ISSN 1684-5315

Amin Eisazadeh Otaghsaraei (2011) Thermal characteristic of phosphoric acid treated tropical soils. In: 5th Asia-Pacific Conference On Unsaturated Soils (Ap-Unsat 2011).

Anis, S. and Md. Tahir, Mahmood and Sulaiman, Arizu and Shek, Poi Ngian and Tan, Cher Sian and Beng Hong, Ahmad Kueh (2011) Behaviour of composite beam with trapezoid web profiled steel section in sub-assemblage frame. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1271-1274. ISBN 978-303785127-2

Ansari, Meisam (2011) The most efficient contribution of shear walls in dual structural systems in medium height buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arumogam, Sunthar (2011) Effect of slope angle and soil properties on deformation and stability of cut slopes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asadi, Mohammad Sadeq (2011) Hydrodynamic and sediment transport modelling in the Padas estuary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abdul Rahim and Marto, Aminaton and Makhtar, Ahmad Mahir (2011) Geotechnical properties of tanjung bin coal ash mixtures for backfill materials in embankment construction. Electronic Journal of Geotechnical Engineering, 16 L . pp. 1515-1531. ISSN 1089-3032

Azman, Shamila (2011) Watering of landscape plants using wastewater treated with terminalia. In: 4th IWA Aspire Conference And Exhibition.

Ahmad, Yusof (2011) Ductility of timber beams strengthened using carbon fiber reinforced polymer plates. In: International Conference On Structural Engineering, Construction And Managemant (Icsecm).

B

Badrun, Mohd. Zahrullail (2011) Prediction of ultimate bored pile capacity using global strain extensometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharudin, N. H. and Kasa, A. and Chik, Z. and Adn, A. and Taha, M. R. (2011) Preparation of residual soil samples by using modified method. Advanced Materials Research, 163-16 . pp. 4470-4473. ISSN 1022-6680

Bakhary, Norhisham (2011) Application of neural network for prediction of unmeasured mode shape for damaged detection. In: 14th Asia Pacific Vibration Conference (APVC 2011).

Bakhary, Norhisham and Abdul Rahman, Azlan and Ahmad, Baderul Hisham and Ramli, Mohd. Zamri (2011) A study on uncertainties in vibration based damage detection for reinforced concrete bridge. Project Report. Fakulti Kejuruteraan Awam, Skudai, Johor. (Unpublished)

Bakti, Erman Surya and Abdul Majid, Muhd. Zaimi and Muhamad Zin, Rosli and Trigursyah, Bambang (2011) Constructability improvement in seawater intake structure. Engineering, Construction and Architectural Management, 18 (6). pp. 595-608. ISSN 0969-9988

Balakrishnan, Thayalan (2011) Corrosion problem in reinforced concrete structures exposed to marine environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Beng, Ahmad Hong Kueh and Wai, Wai Seh and Poi, Ngian Shek and Cher, Siang Tan and Md. Tahir, Mahmood (2011) Maximum local thermal effects carpet plot for symmetric lamited composite plates. Advanced Materials Research, 250-25 . pp. 3748-3751. ISSN 1022-6680

Bhutta, Muhammad Aamer Rafique (2011) Air permeability of hardener-free epoxy-modified mortars using NDT. Concrete Research Letters, 2 (2). pp. 241-248. ISSN 2180-1371

Bong, Winnie Chui Nyuk (2011) Implementing knowledge sharing in construction industry firms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Boroojeni, Mohsen Bakhtiari (2011) Energy efficiency in non-residential building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Burhanudin, Noor Ainy (2011) Adaptation of gateway™ as JKR process review to ensure project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

C

Chai, Welfred Khai Hung (2011) Motivations and barriers to the implementation of green building policy in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ku Abdullah, Che Ku Sufiah (2011) The reliability and effectiveness of department estimate in tender evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Puan, Othman (2011) Pedestrian and vehicular traffic delays at zebra crossing facilities. In: Curtin University Science & Technology International Conference (CUTSE 2011).

Chek Rani, Siti Haryani and Md. Din, Mohd. Fadhil and Mohd. Yusof, Badruddin and Chelliapan, Shreeshivadasan (2011) Overview of subsurface constructed wetlands application in tropical climates. Universal Journal of Environmental Research and Technology, 1 (2). pp. 103-114. ISSN 2249-0256

Cher, Shiang Tan and Tahir, M. Md. and Poi, Ngian Shek and Beng, Ahmad Hong Kueh (2011) Experimental investigation on slip-in connection for cold-formed steel double channel sections. Advanced Materials Research, 250-25 . pp. 1038-1041. ISSN 1022-6680

Cho, Jian Yin (2011) Modification of Kahang clay soil with palm oil fuel ash (POFA) as potential landfill liner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choi, Sang Long and Wan Ismail, Wan Khairuzzaman (2011) Usage of HR technology: a future trend for HR professionals. International Journal of Physical Sciences, 5 (8). pp. 990-994. ISSN 1991-8178

Choo, Kok Wah (2011) Decision making framework for an earthquake resistant building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chow, Ming Fai (2011) Quantification and modeling of non-point source pollution in residential, commercial and industrial catchments. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chung, Hui Hui (2011) Risk assessment on safety in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

D

Damayanti, A. and Ujang, Zaini and Salim, M. R. (2011) The influenced of PAC, zeolite, and Moringa oleifera as biofouling reducer (BFR) on hybrid membrane bioreactor of palm oil mill effluent (POME). Bioresource technology, 102 (6). pp. 4341-6. ISSN 1873-2976

Damayanti, A. and Ujang, Zaini and Salim, Mohd. Razman and Olsson, G. (2011) The effect of mixed liquor suspended solids (MLSS) on biofouling in a hybrid membrane bioreactor for the treatment of high concentration organic wastewater. Water Science and Technology, 63 (8). pp. 1701-1706. ISSN 0273-1223

Damayanti, Alia and Ujang, Zaini and Salim, Razman (2011) The influenced of pac, zeolite and moringa olifera as biofouling reducer (BFR) on hybrid membrane bioreactor of palm oil mill effluent (POME). Bioresource Technology, 102 (6). pp. 4341-4346. ISSN 0960-8524

Dan'azumi, S. and Shamsudin, Supiah (2011) Modeling the distribution of inter-event dry spell for Peninsular Malaysia. Journal of Applied Sciences Research, 7 (3). pp. 333-339. ISSN 1816-157X

Daniel, Akinmade Oluwatosin (2011) Comparative analysis of stage and phase signal control of a signalised intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

E

Eisazadeh, Amin and Kassim, Khairul Anuar and Nur, Hadi (2011) Cation exchange capacity of a quartz-rich soil in an acidic and basic environment. Advanced Materials Research, 255-26 . pp. 2766-2770. ISSN 1022-6680

Eisazadeh, Amin and Kassim, Khairul Anuar and Nur, Hadi (2011) Characterization of phosphoric acid- and lime-stabilized tropical lateritic clay. Environmental Earth Sciences, 63 (5). pp. 1057-1066. ISSN 1866-6280

Eisazadeh, Amin and Kassim, Khairul Anuar and Nur, Hadi (2011) Characterization of phosphoric acid-and lime-stabilized tropical lateritic clay. Environmental Earth Sciences, 63 (5). pp. 1057-1066. ISSN 1866-6280

Entika, Christie Lanjing (2011) Structural response spectra for different soil condition under earthquake loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Erfan, Farhang (2011) A practical approach towards sustainable renovation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esa, Aini Sakinah (2011) Consolidation of layered soil using vertical drain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

Fateh, Amir (2011) Behaviour of external column wide beam joint with different bar arrangement and shear link. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Firouzi, Morteza (2011) Hydrologic analysis for southern Malaysian using modeling and analytical probabilistic approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foo, Kian Seng (2011) Potential retrofitting of UTM existing buildings to green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fulazzaky, Mohamad Ali (2011) Removal of oil and grease fron the Ulu Pontian river water using the granular activated carbon block filter. In: 1St International Conference On Desalination And Environment : A Water Summit.

G

Gan, Yong Huei (2011) Capturing the sustainability issues in concurrent engineering design environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghadiri, Armin (2011) Ultimate strength of post-tension hollow IBS slabs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Lyn Dee and Bakhary, Norhisham and Abd. Rahman, Azlan and Ahmad, Baderul Hisham (2011) A comparison of artificial neural network learning algorithms for vibration-based damage detection. In: Advances in Structures. Trans Tech Publications, Switzerland, pp. 2756-2760. ISBN 978-087849206-0

Goh, Lyn Dee and Bakhary, Norhisham and Abdul Rahman, Azlan and Ahmad, Baderul Hisham (2011) A comparison of artificial neural network learning algorithms for vibration-based damage detection. Advanced Materials Research, 163-16 . pp. 2756-2760. ISSN 1022-6680

Goh, Lyn Dee and Dee, Dee and Bakhary, Norhisham and Ahmad, Baderul Hisham (2011) A comparison of artificial neural network learning algorithms for vibration-based damage detection. In: 2011 International Conference On Structures And Building Materials (ICSBM 2011).

Goh, Yee Cai (2011) Method for determining optimum rain gauge network in a tropical urban catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

H

Hadibarata, Tony and Mohd. Yusoff, Abdull Rahim and Aris, Azmi and Kristanti, Risky Ayu and Hidayat, Topik and Yuniarto, Adhi (2011) Effects of glucose on the Reactive Black 5 (RB5) decolorizarion by two white rot basidiomycetes. ITB Journal of Science, 43 (3). pp. 179-186. ISSN 0974-407X

Hafidzi, Muhammad Nor and Beng, Ahmad Hong Kueh and Rasin, Norhidayah and Mohd. Yassin, Airil Yasreen and Mohamad, Hisham (2011) Size dependant uniaxially loaded stability of traxial weave fabric composites. Applied Mechanics and Materials, 94-96 . pp. 1742-1745. ISSN 1660-9336

Hainin, Mohd. Rosli (2011) Perfomance of asphaltic concrete using slag aggregate. In: International Conference On Road And Airfield Pavement Technology (Icpt).

Hajihasani, N. and Bakhary, Norhisham (2011) Detection of concrete spalling using changes in modal flexibility. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 2598 -2602. ISBN 978-087849206-0

Halim, Shafini (2011) Red light running at fixed-time and vehicle actuated traffic signal control system in urban and sub-urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Ramlan (2011) Leveraging on lesson learnt in Jabatan Kerja Raya project management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Muzamir and Marto, Aminaton and Hyodo, Masayuki and Makhtar, Ahmad Mahir (2011) The strength of soft clay reinforced with singular and group bottom ash columns. Electronic Journal of Geotechnical Engineering, 16 N . pp. 1215-1227. ISSN 1089-3032

Hasani, Nadia and Bakhary, Norhisham (2011) Detection of concrete spalling using changes in modal flexibility. Advanced Materials Research, 163-16 . pp. 2598-2602. ISSN 1022-6680

Hashim, Hadzeri (2011) Implementing customer service improvement plan in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassani, M. and Marto, A. and Mazi, E. and Abad, S. V. A. N. K. and Shahrbabaki, M. K. (2011) Prediction of surface settlements induced by TM tunnelling based on artificial neural networks. Electronic Journal of Geotechnical Engineering, 16 S . pp. 1471-1480. ISSN 1089-3032

Hassin, Suriani (2011) Laboratory rutting performance of polymer modified asphalt mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hatta @ Antah, Fazilah (2011) Perlaksanaan pengurusan berkesan projek Sistem Binaan Berindustri (IBS) di Jabatan Kerja Raya (JKR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Helou, Adam Mahamat (2011) Students perception on social networking sites influence on academic performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heryansyah, Arien (2011) Calibration and simulation of runoff models developing watershed respond knowledge. In: First International Conference On Geotechnique, Construction Materials And Environment.

Hong, Ahmad Kueh Beng and Md Tahir, Mahmood and Mohammad, Shahrin and Ngian, Shek Poi and Siang, Tan Cher (2011) Experimental investigation on locally produced cold- formed steel sections for root truss system. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Hong, T. K. and Bakhary, N. and Mutalib, A. and Ang, R. (2011) Vibration-based damage detection using modal data: an experimental verification. Jurnal Teknologi, 56 . pp. 31-44. ISSN 0127-9696

Hosseini, P. and Mohamad, M. I. and Nekooie, M. A. and Taherkhani, R. and Booshehrian, A. (2011) Toward green revolution in concrete industry: the role of nanotechnology (a review). Australian Journal of Basic and Applied Sciences, 5 (12). pp. 2768-2782. ISSN 1991-8178

Hosseini, Seyed Hossein (2011) Comparative analysis of level of service (LOS) under varying lighting conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Mohd. Warid (2011) Mechanical properties of geopolymer concrete using blended ash agro-industrial waste. In: Concrete 2011-The Concrete Institute Of Australia 25th Biennial Conference.

Hussin, Mohd. Warid and Bhutta, Muhammad Aamer Rafique (2011) Mix design and compressive strength of geopolymer concrete containing blended ash from agro-industrial wastes. In: Advanced Manufacturing Systems. Advanced Materials Research, 339 . Trans Tech Publications, Switzerland, pp. 452-457. ISBN 978-303785249-1

I

Ibrahim, Ismail (2011) Strategic stakeholder management methodology for programme and project success in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Izni Syahrizal (2011) Enchancement of strength properties of steel fibre reinforced concrete. In: The 3rd International Conference Europian Asian Civil Engineering Conference 2011.

Ibrahim, Izni Syahrizal (2011) Mechanical properties of concrete containing recycled steel fibres. In: The 3rd International Conference Europian Asian Civil Engineering Conference 2011.

Ibrahim, Izni Syahrizal and Che Bakar, M. B. (2011) Effects on mechanical properties of industrialised steel fibres addition to normal weight concrete. Procedia Engineering, 14 . pp. 2616-2626. ISSN 1877-7058

Ibrahim, Izni Syahrizal and Che Bakar, Mohd. Basri and Sarbini, Noor Nabilah and Mohamed, Roslli Noor (2011) Shear capacity of composite slab reinforced with steel fibre concrete topping. Malaysian Journal of Civil Engineering, 23 (1). pp. 1-23. ISSN 1823-7843

Ishak, Izzuadi (2011) Qualitative risk management in Jabatan Kerja Raya (JKR) Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, M. and Muhammad, B. and M. Yatim, J. and Noruzman, A. H. and Soon, Y. W. (2011) Behavior of concrete with polymer additive at fresh and hardened states. Procedia Engineering, 14 . pp. 2230-2237. ISSN 1877-7058

Ismail, Mohammad and Abdulrahman, A. S. and Hussain, Mohammad Sakhawat (2011) Solid waste as environmental benign corrosion inhibitors in acid medium. International Journal of Engineering Science and Technology (IJEST), 2 (3). pp. 1742-1748. ISSN 0975-5462

Ismail, Mohammad and Ismail, Mohamed El Gelany and Muhammad, Bala (2011) Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash. Construction and Building Materials, 25 (5). pp. 2358-2364. ISSN 0950-0618

Ismail, Mohammad and Muhammad, Bala (2011) Electrochemical chloride extraction effect on blended cements. Advances in Cement Research, 23 (5). pp. 241-248. ISSN 0951-7197

Ismail, Mohammad and Muhammad, Bala and Yussuf, A. A. and Abd. Majid, Zaiton and Ismail, M. E. (2011) Mechanical capabilities and fire endurance of natural rubber latex modified concrete. Canadian Journal of Civil Engineering, 38 (6). pp. 661-668. ISSN 0315-1468

Ismail, Mohammad and Muhammad, Bala and Yussuf, Abdirahman Ali and Majid, Zaiton and Ismail, Mohamed ElGelany (2011) Mechanical capabilities and fire endurance of natural rubber latex-modified cement concrete. Canadian Journal of Civil Engineering, 38 (6). pp. 661-668. ISSN 1208-6029

Ismail, Mohammad and Muhammad, Bala and Yusuf, Abdirahman Ali and Majid, Zaiton and Ismail, Mohamed ElGelany (2011) Mechanical capabilities and fire endurance of rural rubber latex modified concrete. Canadian Journal of Civil Engineering, 38 (6). pp. 661-668. ISSN 0315-1468

Ismail, Mohammad and Siti Fatimah, A. R. and Muhammad, Bala and Md. Noor, Norhazilan and Bakhtiar, Hazri (2011) Embedded sensor for detecting corrosion of reinforcement in concrete. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1118-1123. ISBN 978-303785127-2

Ismail, Mohammad and Siti Fatimah, A. R. and Muhammad, Bala and Bakhtiar, Hazri (2011) Embedded sensor for detecting corrosion of reinforcement in concrete. Advanced Materials Research, 250-25 (-). pp. 1118-1123. ISSN 1022-6680

Ismail, Nurul Adzura (2011) Statistical downscaling for climate change assessment on hydrology. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, R. and Adn, A. and Ibrahim, A. (2011) Vulnerability of public buildings in Sabah subjected to earthquake by finite element modelling. Procedia Engineering, 20 . pp. 54-60. ISSN 1877-7058

J

Jahandar, Nima (2011) Extent of road lighting impact on highway capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahanmirinezhad, Hossein (2011) Prediction of bearing capacity of bored pile socketted in limestone of varying rock quality designation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jantan, Zulkaplee (2011) Critical success factors managing class F projects in Klang Valley. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jorat, Mohammad Ehsan and Marto, Aminaton and Namazi, Eshagh and Mohd. Amin, Mohd. For (2011) Engineering characteristics of kaolin mixed with various percentages of bottom ash. Electronic Journal of Geotechnical Engineering, 16 H . pp. 841-850. ISSN 1089-3032

K

Kamaruddin, Samira Albati and Sulaiman, Nurul Aida and Abd. Rahman, Norhan and Zakaria, Mohamad Pauzi and Mustaffar, Mushairry and Sa'ari, Radzuan (2011) A review of laboratory and numerical simulations of hydrocarbons migration in subsurface environments. Journal of Environmental Science and Technology, 4 (3). pp. 191-214. ISSN 1994-7887

Kasim, Fauziah (2011) Numerical analysis of bamboo-geotextile composite reinforced embankment on soft clay. In: International Conference On Advances In Geotechnical Engineering 2011.

Kassim, Azman (2011) Modelling the effect of heterogeneities on suction distribution behaviour in tropical residual soil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kassim, Khairul Anuar (2011) Uplift of horizontal strip anchor plates using finite element method in sand. In: The 21St International Offshore (Ocean) And Polar Engineering Confernece & Exhibition (Isope 2011).

Kassim, Khairul Anuar and Mohammed Ahmed, Omar Babiker Elhaj (2011) Comparison of continuous dynamic probing with the standard penetration test for highly weathered limestone of Eastern Sudan. Electronic Journal of Geotechnical Engineering, 16 B . pp. 235-249. ISSN 1089-3032

Kassim, Khairul Anuar and Nazir, Ramli and Niroumand, Hamed (2011) Uplift capacity of anchor plates in two-layered cohesive-frictional soils. Journal of Applied Sciences, 11 (3). pp. 589-591. ISSN 1812-5654

Kassim, Khairul Anuar and Niroumand, Hamed and Yah, Chong Siaw (2011) Soil improvement by reinforced stone columns based on experiments works. Electronic Journal of Environmental, Agricultural and Food Chemistry, 10 (7). pp. 2460-2478. ISSN 1579-4377

Khairul Anuar Kassim (2011) Soil/rock anchors in tunnel. In: International Conference & Exhibition On Tunneling And Trenchless Technology.

Khairul Anuar Kassim (2011) Three dimensional analyses of uplift in horizontal strip anchor plates using finite diference method. In: The 21St International Offshore (Ocean) And Polar Engineering Confernece & Exhibition (Isope 2011).

Khari, M. and Kassim, K. A. B. and Adn, A. B. (2011) The influence of effective confining pressure on site response analyses. Asian Journal of Earth Sciences, 4 (3). pp. 148-156. ISSN 1819-1886

Khasim, Muhammad Syukri (2011) Benchmarking JKR quality management system with industry best practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khoshnoud, H. R. and Marsono, Abdul Kadir (2011) Assessment of performance of buildings with high importance factor through non-linear static and dynamic procedure. International Journal on Recent Trends in Engineering and Technology, 5 (3). pp. 17-22. ISSN 2158-5563

Khosravi, Amir (2011) Managing unexpected events in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kiu, Kelvina Siu Jen (2011) Contractors' preception towards public-private partnership in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koushfar, Kiarash (2011) Development of durable fiber reinforced polymer grouted splice connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kueh, A. B. H. and Tan, C. S. and Tahir, M. M. and Shek, Poi Ngian (2011) Experimental investigation of end-plate connection with cruciform column section. In: International Conference On Civil Engineering, Architecture And Building Materials (CEABM).

Kueh, Ahmad and Tan, Cher Siang and Md Tahir, Mahmood and Shek, Poi Ngian and Mohammad, Shahrin (2011) Structural behavior of combined flange-cleat and gusset plate connection for cold -formed steel double channel sections. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Kueh, Ahmad Beng Hong (2011) Flexural performance of luminated composite plate with diagonally pesturbed localized delamination. In: The 2nd International Symposium On Mechanical Science And Technology (Icmst 2011).

Kueh, Ahmad Beng Hong (2011) Maximum local thermal effects carpet plot for symmetric laminated composite plates. In: 2011 International Conference On Civil Engineering, Architecture And Building Materials (2011 CEABM).

Kueh, Ahmad Beng Hong and Shek, Poi Ngian and Tan, Cher Siang and Md. Tahir, Mahmood (2011) Maximum local thermal effects carpet plot for symmetric laminated composite plates. In: Advanced Building Materials. Advanced Materials Research, 250-25 . Trans Tech Publications, Switzerland, pp. 3748-3751. ISBN 978-303785127-2

Kuok, King Kuok and Harun, Sobri and Chiu, Po Chan (2011) Hourly runoff forecast at different lead-time for a small watershed using artificial neural networks. International Journal of Advances in Soft Computing and Its Applications, 3 (1). pp. 68-86. ISSN 2074-8523

Kuok, King Kuok and Harun, Sobri and Po, Chan Chiu (2011) A review of integrated river basin management for Sarawak River. American Journal of Environmental Sciences, 7 (3). pp. 276-285. ISSN 1553-345X

L

Lee, Hoong Pin (2011) Behaviour of externally confined high strength concrete column under uniaxial cyclic compression. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Min Lee and Kassim, Azman and Gofar, Nurly (2011) Performances of two instrumented laboratory models for the study of rainfall infiltration into unsaturated soils. Engineering Geology, 117 . pp. 78-89. ISSN 0013-7952

Lim, S. K. and Hussin, M. W. and Ling, T. C. (2011) GGBFS as potential filler in polyester grout: compressive strength development. ACI Materials Journal, 108 (2). pp. 120-127.

Ling, Jen Hua (2011) Behaviour of grouted splice connections in precast concrete walls subjected to tensile, shear and flexural loads. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M

Mahamod Sarkoni, Sahidatul Fariza (2011) Simplified business continuity planning guideline for Universiti Teknologi Malaysia, center for information and communication technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmood Md. Tahir (2011) Structural behavior of screwed beam to column moment connections with cold-formed steel members. In: The 6Th International Symposium On Steel Structures (Isss-2011).

Mahmud, Ahmad Fahmi (2011) Safe welding parameter for inner hull repair works on LNG carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansour, F. R. and Parniani, S. and Ibrahim, Izni Syahrizal (2011) Experimental study on effects of steel fiber volume on mechanical properties of SFRC. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 144-148. ISBN 978-303785063-3

Mansour, Farnoud Rahimi and Parniani, Sasan and Ibrahim, Izni Syahrizal (2011) Experimental study on effects of steel fiber volume on mechanical properties of SFRC. Advanced Materials Research, 214 . pp. 144-148. ISSN 1022-6680

Marto, Aminaton (2011) Chase your goal to score success. In: New Straits Time.

Mat Din, Mazura and Md. Nor, Norhazilan and Ngadi, Md. Asri and Abd. Razak, Khadijah and Md. Siraj, Maheyzah (2011) Automated matching systems and correctional method for improved inspection data quality. International Journal of Computer Theory and Engineering, 3 (2). pp. 248-254. ISSN 1793-8201

Md. Din, Mohd. Fadhil (2011) Organic carbon and nitrogen utilization rate of chlorella sorokiniana from sattled raw palm oil mill effluent (POME) for lipid production. In: Toward Sustainable Water Supply And Recycling Systems.

Md. Isa, Mohamed Fauzi (2011) Effects of moisture content on the strength of weathered granite in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Noor, Norhazilan (2011) Corrosion study on x70-carbon steel material influenced by soil engineering properties. In: International Conference On Advances Design And Manufacturing Engineering.

Md. Noor, Norhazilan and Kar, Sing Lim and Nordin, Yahaya and Abdullah, Arman (2011) Corrosion study on x70-carbon steel material influenced by soil engineering properties. Advanced Materials Research, 311-31 . pp. 875-880. ISSN 1022-6680

Md. Noor, Norhazilan and Nor Ozman, Nor Apaziah and Yahaya, Nordin (2011) Deterministic prediction of corroding pipeline remaining strength in marine environment using DNV RP -F101 (Part A). Journal of Sustainability Science and Management, 6 (1). pp. 69-78. ISSN 1823-8556

Md. Noor, Norhazilan and Sing, L. K. and Yahaya, Nordin and Abdullah, A. (2011) Corrosion study on X70-carbon steel material influenced by soil engineering properties. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 875-880. ISBN 978-303785214-9

Md. Tahir, Mahmood (2011) Comparative analyses of seismic behavior of v-braced frames and suspended zipper0braced framed. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Md. Tahir, Mahmood and Shek, Poi Ngian (2011) Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections. Structural Engineering and Mechanics, 38 (6). pp. 825-847. ISSN 1225-4568

Md. Tap, Masine and Mohamed Kamar, Haslinda and Marsono, Abdul Kadir and Kamsah, Nazri and Mohd. Salimin, Khairul Amry (2011) Simulation of thermal comfort of a residential house. IJCSI International Journal of Computer Science Issues, 8 (5). pp. 200-208. ISSN 1694-0814

Md. Yusof, Aminah (2011) Allocating risk in public infrastructure project provision via PFE. In: 2011 International Conference On Social Science And Society.

Md. Yusof, Aminah (2011) An analysis of housing cycle in Malaysia. In: 2011 International Conference On Social Science And Society.

Meldi, Meldi (2011) Nonlinear seismic performance of integral prestressed concrete boxgirder bridge in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mior Shahidin, Shazatul Nadia (2011) Improving on-site construction safety. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Edy Tonnizam (2011) Analysis of social learning network for wiki in moodle e-learning. In: The 4th International Conference On Interaction Science.

Mohamad, Edy Tonnizam and Abad, Seyed Vahid Alavi Nezhad Khaili and Saad, Rosli (2011) Challenges of excavation by ripping works in weathered sedimentary zone. Electronic Journal of Geotechnical Engineering, 16 . pp. 1337-1350. ISSN 1089-3032

Mohamad, Edy Tonnizam and Alshameri, Badee Abdulqawi and Kassim, Khairul Anuar and Saad, Rosli (2011) Shear strength behaviour for older alluvium under different moisture content. Electronic Journal of Geotechnical Engineering, 16 F . pp. 605-617. ISSN 1089-3032

Mohamad, Edy Tonnizam and Gofar, Nurly and Mohd. Amin, Mohd. For and Mohd. Isa, Mohamed Fauzi (2011) Field assessment of rock strength by impact load test. Malaysian Journal of Civil Engineering, 23 (1). pp. 105-110. ISSN 1823-7843

Mohamad, Edy Tonnizam and Md. Isa, Mohamed Fauzi and Mohd. Amin, Mohd For and Komoo, I. and Gofar, Nurly and Saad, R. (2011) Effect of moisture content on the strength of various weathering grades of granite. Electronic Journal of Geotechnical Engineering, 16 H . pp. 863-886. ISSN 1089-3032

Mohamad, Edy Tonnizam and Nezhad Khalil Abad, Seyed Vahid Alavi (2011) Assessment on blasting-induced rock slope instability at Johor, Malaysia. Electronic Journal of Geotechnical Engineering, 16 D . pp. 357-374. ISSN 1089-3032

Mohamad, Edy Tonnizam and Othman, Mohamed Zahry and Gofar, Nurly and Adnan, Siti Sarah and Saad, Rosli (2011) The effectiveness of electrodes types on electro-osmosis of Malaysian soil. Electronic Journal of Geotechnical Engineering, 16 H . pp. 887-898. ISSN 1089-3032

Mohamad, Edy Tonnizam and Saad, Rosli and Nezhad Khaili Abad, Seyed Vahid Alavi (2011) Durability assessment of weak rock by using JAR slaking test. Electronic Journal of Geotechnical Engineering, 16 . pp. 1319-1335. ISSN 1089-3032

Mohamad, Hisham (2011) Application of fibre optic distributed strain sensing in tunnels. In: International Conference & Exhibition On Tunneling And Trenchless Technology.

Mohamad, Hisham (2011) Assessment of building damage induced by excavation using plate analogy. In: 7th International Symposium On Geotechnical Aspects Of Underground Construction In Soft Ground.

Mohamad, N. and Omar, W. and Abdullah, R. (2011) Precast lightweight foamed concrete sandwich panel (PLFP) tested under axial load: preliminary results. Advanced Materials Research, 250-25 . pp. 1153-1162. ISSN 1022-6680

Mohamad, Rosli (2011) Health risk assessment of household hazardous waste in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Zin, Rosli (2011) Incremental rapid visual screening method for seismic vulnerability assessment of existing buildings. In: International Conference On Earthquake Engineering And Disaster Mitigation Ii 2011.

Mohamad Zin, Rosli and M., Yadollahi (2011) Development of analytical hierarchy process (AHP) method for rehabilition project ranking before disaster. In: 2nd International Conference On Disaster Management And Human (Disaster Mangement 2011).

Mohamad Zin, Rosli and Mohammadreza, Vafaei and Mohammadreza, Yadollahi (2011) A model for seismic vulnerability score assignment of road infrastructure using linear regression technique. In: 2011 International Conference On Civil Engineering And Building Materials (CEBM 2011).

Mohamed, Abdeliazim Mustafa (2011) Project management consultant (PMC) in Sudanese construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ali, Nasly and Amani, Nima and Abd. Samad, Roslida (2011) Developing a framework of economic model for building component lifecycle repair. Advanced Materials Research, 255-26 . pp. 3893-3897. ISSN 1022-6680

Mohamed Hussien Ahmaidi, Hani (2011) Personnel job satisfaction and job performance in Sudanese construction firms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Yusof, Nurfadzlin (2011) Moisture susceptibility of Malaysian hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Azmi, Mohammad Norshazni (2011) Impacts of road safety stratagems on accident reduction in urban areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd., Mohd. Hairil (2011) Finite element formulation for semi-rigid beam-to-column connections using potential energy approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ariffin, Mohd. Azreen and Hussin, Mohd. Warid and Bhutta, M. Aamer Rafique (2011) Mix design and compressive strength of geopolymer concrete containing blended ash from agro-industrial wastes. Advanced Materials Research, 339 . pp. 452-457. ISSN 1022-6680

Mohd. Hanif, Mohd. Ikhmil Faevwasz (2011) Problems and dilemmas of class F contractors' participation in large projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasir, Mohd. Nazira (2011) The effectiveness of monitoring control on risk menagement practices in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasir, Siti Rashidah (2011) Contractor performance measurement for public school projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nor, Shadiah Husna (2011) Probabilistic-based corrosion modelling using inspection data of ballast and LPG stell tanks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Radzi, Nor Syaziana (2011) Effects of traffic volume on red-light running at fixed-time traffic signal system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sanusi, Mohd. Khairi (2011) Earned value management as a performance indicator for effective measurement to ensure PWD project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Suhaimi, Mohd. Shah Khairi (2011) The study of position of outrigger to minimise the bending moment induced by wind load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Umar, Mohd. Asmadi (2011) Project quality effectiveness in renovation works at Telekom Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zain, Resli Azha (2011) Productivity of rendering and tiling works for building projects scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhtar, Khairatunnisa (2011) Quantification and modelling of sediment loading in oil palm catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muda, Khalida and Aris, Azmi and Salim, Mohd. Razman and Ibrahim, Zaharah and van Loosdrecht, Mark C. M. and Ahmad, Azlan N.Aizat and Nawahwi, Mohd. Zaini (2011) The effect of hydraulic retention time on granular sludge biomass in treating textile wastewater. Water Research, 45 (16). pp. 4711-4721. ISSN 0043-1354

Muhammad, Bala and Ismail, Mohammad and Ali Yussuf, Abdirahman and Muhammad, A. R. B. (2011) Elastomeric influence of rural rubber latex on cement mortar at high temperatures using thermal degradation analysis. Construction and Building Materials, 25 (5). pp. 2223-2227. ISSN 0950-0618

Muhammad, Bala and Ismail, Mohammad and Bhutta, Muhammad Aamer Rafique and Abdul-Majid, Zaiton (2011) Influence of non-hydrocarbon substances on the compressive strength of rural rubber latex-modified concrete. Construction and Building Materials, 27 (1). pp. 241-246. ISSN 0950-0618

Muhammad, Bala and Ismail, Mohammad and Yussuf, Abdirahman Ali and Bhutta, Muhammad Aamer Rafique (2011) Elastomeric influence of natural rubber latex on cement mortar at high temperatures using thermal degradation analysis. Construction and Building Materials, 25 (5). pp. 2223-2227. ISSN 0950-0618

Muhammad Babangida, Nuraddeen (2011) Pedotransfer functions for various tropical soil textures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhardi, Muhardi (2011) Pulverised fuel ash as structural fill for embankment construction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhd Yunus, Salmiati (2011) Respirometry of palm oil mill effluent (POME) using cod-fractionation at different substrates as carbon sources. In: The 4th Iwa-Aspire Conference & Exhibition.

Muhd. Zaimi Abd. Majid (2011) Sidewalk design decision making model based on walking behaviour pattern recognition: proposal validation. In: International Conference On Sustainable Development.

Muhd. Zaimi Abd. Majid (2011) Sustainable road planning and design and design/traffic management in road infrastructure index. In: International Construction Business & Management Symposium (LCBMS 2011).

Munikanan, Vikneswaran (2011) Sustainable neighbourhood elements for urban neighbourhood planning and design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musa, Muzammil (2011) Resistance towards job transfer among Jabatan Kerja Raya professionals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muslim, Shukri (2011) Indeks insuran banjir ekstrim kawasan tropika separa bandar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mutalib, A. A. and Bahkhary, Norhisham (2011) Empirical formulae to predict pressure and impulsive asymptotes for p-i diagrams of rc columns strengthened with FRP. Jurnal Teknologi, 55 . pp. 27-38. ISSN 0127-9696

Muthuveerappan, Chitrakala and Muhammad, Abdul Hakim and Abd. Majid, Muhd. Zaimi and Minhans, Anil (2011) A prototype to recognise the drawing elements in construction drawings using artificial intelligence. In: 2011 International Symposium On Mechanical Science And Technology.

N

Namazi, Eshagh and Mohamad, Hisham and Jorat, Mohammad Ehsan and Hajihassani, Mohsen (2011) Investigation on the effects of twin tunnel excavations beneath a road underpass. Electronic Journal of Geotechnical Engineering, 16D . pp. 441-450. ISSN 1089-3032

Nezhad Khaili Abad, Seyed Vahid Alavi and Mohamad, Edy Tonnizam and Jahanmirinezhad, Hossein and Hajihassani, Mohsen and Namazi, Eshagh (2011) Zonation of landslide hazards based on weights of evidence modeling along Tehran-Chalos Road Path, Iran. Electronic Journal of Geotechnical Engineering, 16J . pp. 1083-1097. ISSN 1089-3032

Ng, Wai Yoke (2011) Perception of life cycle costing in Malaysia green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngien, S. K. and Abd Rahman, Norhan and Lewis, R. W. and Ahmad, K. (2011) Numerical modelling of multiphase immiscible flow in double-porosity featured groundwater systems. International Journal for Numerical and Analytical Methods in Geomechanics, 36 (10). pp. 1330-1349. ISSN 0363-9061

Niroumand, H. (2011) Uplift response of symmetrical circular anchor plate in sand. African Journal of Agricultural Research, 6 (28). pp. 6057-6063. ISSN 1991-637X

Niroumand, H. and A. Kassim, Kh. and Nazir, Ramli (2011) History of horizontal anchor plates based on experimental works in cohesion less soil. In: Fifth International Symposium On Deformation Characteristics Of Geomaterials.

Niroumand, H. and A. Kassim, Kh. and Nazir, Ramli (2011) Different theories & numerical analysis of anchor plates in sand. In: Fifth International Symposium On Deformation Characteristics Of Geomaterials.

Niroumand, Hamed and Kassim, Khairul Anuar (2011) Simulation comparison of the dispersion behaviour of dry sand subjected to explosion. International Journal of Physical Sciences, 6 (7). pp. 1583-1590. ISSN 1992-1950

Niroumand, Hamed and Kassim, Khairul Anuar (2011) Uplift response of square anchor plates in dense sand. International Journal of Physical Sciences, 6 (16). pp. 3938-3942. ISSN 1992-1950

Niroumand, Hamed and Kassim, Khairul Anuar and Chong, Siaw Yah (2011) Soil improvement by reinforced stone columns based on experimental. Electronic Journal of Geotechnical Engineering, 16 . pp. 1477-1499. ISSN 1089-3032

Niroumand, Hamed and Kassim, Khairul Anuar and Chong, Siaw Yah (2011) Soil improvement by reinforced stone columns based on experimental work. Electronic Journal of Geotechnical Engineering, 16L . pp. 1477-1499. ISSN 1089-3032

Noor, Norhazilan Md. and Nor Ozman, Nor Apaziah and Yahaya, Nordin (2011) Deterministic prediction of corroding pipeline remaining strength in marine environment using DNV RP–F101 (Part A). Journal of Sustainability Science & Management, 6 (1). pp. 69-78. ISSN 1823-8556

O

Omar, Wahid and Mohamad, Noridah and Abdullah, Redzuan (2011) Precast lightweight foamed concrete sandwich panel (PLFP) tested under axial load: preliminary results. In: Advanced Materials Research. Elsevier, Haikou, pp. 1153-1162. ISBN 978-303785127-2

Osman, Arnita Sofia (2011) Productivity of concreting work in Jabatan Kerja Raya building projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Otaghsaraei, Amin Eisazadeh (2011) Cation exchange capacity of a quartz-rich soil in an acidic and basic environment. In: 2011 International Conference On Civil Engineering And Building Material (CEBM).

Otaghsaraei, Amin Eisazadeh and Kassim, Khairul Anuar and Nur, Hadi (2011) Cation exchange capacity of a quartz-rich soil in an acidic and basic environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 2766 -2770. ISBN 978-303785139-5

Othman, Fadhil (2011) Improvement of leachate treatment using electrocoagulation method. In: Set 2011.

P

Pan, How Yen (2011) Analysis of three dimensional ground stability due to excavation using upper bound theorem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Parniani, S. and Hussin, Mohd. Warid and Mansour, F. R. (2011) Compressive strength of high volume slag cement concrete in high temperature curing. In: Advanced Materials Research. Trans Tech Publications, Switzerland, p. 3. ISBN 978-303785192-0

Parniani, Sasan and Hussin, Mohd. Warid and Mansour, Farnound Rahimi (2011) Compressive strength of high volume slag cement concrete in high temperature curing. Advanced Materials Research, 287-29 . pp. 793-796. ISSN 1022-6680

Permalu, Sri Viknesh (2011) A procedure for effective contractor evaluation method for gamuda project using evidental reasoning approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Phang, Chui Sian (2011) Output specifications in design and build projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Poi, Ngian Shek and Md. Tahir, Mahmood and Cher, Shiang Tan and Beng, Ahmad Hong Kueh (2011) Experimental investigation of end-plate connection with cruciform column section. Advanced Materials Research, 250-25 . pp. 3730-3733. ISSN 1022-6680

Poi, Ngian Shek and Tan, Cher Siang and Md. Tahir, Mahmood and Sulaiman, Arizu (2011) Experimental investigation on sub-assemblage frame with cruciform column section. In: The 6Th International Symposium On Steel Structures (Isss-2011).

Pui, Yun Fatt (2011) Potential use of palm oil fuel ash as a construction material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

R

Rafique Bhutta, Muhammad Aamer (2011) Mix design and compressive strength of fa-pofa-based geopolymer mortar. In: 9th Symposium On High Perfomance Concrete Design, Verification And Utilization.

Rafique Bhutta, Muhammad Aamer and Ohama, Yoshihiko and Tsuruta, Ken (2011) Strength properties of polymer mortar panels using methyl methacrylate solution of waste expanded polystyrene as binder. Construction and Building Materials, 25 (2). pp. 779-784. ISSN 0950-0618

Raja Murugesu, Vijay Ananda (2011) A cross functional project management model for Siemens Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rees, S. W. and Ali, Nazri (2011) Tree induced soil suction and slope stability. Geomechanics and Geoengineering: An International Journal, 7 (2). pp. 1-11. ISSN 1748-6025

Reshi, Wasid Farooq (2011) Evaluation of stone mastic asphalt using fly ash, cement and hydrated lime as mineral filler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rusbintardjo, Gatot (2011) Bitumen modification using oil palm fruit ash for stone mastic asphalt. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rusli, Nursalasawati and Kasiman, Erwan Hafizi and Kueh, Beng Hong Ahmad and Mohd. Yassin, Airil Yasreen and Amin, Norsarahaida (2011) Numerical computation of a two-dimensional Navier-Stokes equation using an improved finite difference method. Matematika, 27 . pp. 1-9. ISSN 0127-9602

Rusli, Nursalasawati and Kueh, Ahmad Beng Hong and Kasiman, Erwan Hafizi (2011) Staggered grid computation of fluid flow with an improved discretisation of finite differencing. Communications in Computer and Information Science, 253 (3). pp. 82-94. ISSN 1865-0929

S

Sidek, Nurul Haiza (2011) Adsorption of nickel ions from aqueous solution by exhausted coffee grounds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

S. M. Ameen, Emad and Muyibi, Suleyman Aremu and Abdulkarim, Mohamed Ismail (2011) Microfiltration of pretreated sanitary landfill leachate. Environmentalist, 31 (3). pp. 208-215. ISSN 0251-1088

Saad, R. and Mokhtar Saidin, M. and Muztaza, N. M. and Ismail, N. A. and Ismail, N. E. H. and Bery, A. A. and Mohamad, E. T. (2011) Subsurface study using 2-d resistivity imaging method for meteorite impact at Bukit Bunuh, Perak. Electronic Journal of Geotechnical Engineering, 16 . pp. 1507-1513. ISSN 1089-3032

Saad, R. and Muztaza, N. M. and Mohamad, E. T. (2011) The 2D electrical resistivity tomography (ERT) study for civil and geotechnical engineering purposes. Electronic Journal of Geotechnical Engineering, 16 . pp. 1537-1545. ISSN 1089-3032

Safaai, N. S. M. (2011) Projection of CO2 emissions in Malaysia. Environmental Progress and Sustainable Energy, 30 (4). pp. 658-665. ISSN 1944-7442

Saggaff, Anis and Md.Tahir, Mahmood and Sulaiman, Arizu and Poi, Ngian Shek and Cher, Siang Tan and Beng, Ahmad Hong Kueh (2011) Behaviour of composite beam with trapezoid web profiled steel section in sub-assemblage frame. Advanced Materials Research, 250-25 . pp. 1271-1274. ISSN 1022-6680

Saidu, Mohammed and Salim, Mohd. Razman and Mohamed Yuzir, Muhamad Ali (2011) Cultivation of oyster mushroom (pleurotus spp.) on palm oil mesocarp fibre. African Journal of Biotechnology, 10 (71). pp. 15973-15976. ISSN 1684-5315

Salehuddin, Shamshinar (2011) Stability of a six storey steel frame structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salleh, Shamsuni (2011) Critical factors influencing productivity in pavement rehabilitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seyed Vahid Alavi Nezhad Khaili Abad (2011) Zotion of landslide hazards based on weights of evidence modeling along Tehran-Chalos road path, Iran. Electronic Journal of Geotechnical Engineering, 16 . pp. 1083-1097. ISSN 1089-3032

Shahperi, Rafidah and Md. Din, Mohd. Fadhil and Ismail, Zulhilmi and Chelliapan, Shreeshivadasan (2011) Prediction on water quality of point-source pollution for lunchoo river, Malaysia. Environment and Natural Resources Research, 1 (1). pp. 130-138. ISSN 1927-0488

Shakri, R. B. A. and Zakaria, Rozana and Samad, B. H. B. A. (2011) Determining relationship between physical health care settings and mycobacterium tuberculosis. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, 2460 -2465. ISBN 978-303785242-2

Shamsuddin, Siti Aisah (2011) Influence of forest plantation establishment on the hydrological characteristics of small catchments in Selangor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shamsudin, Supiah (2011) Modelling the statistical distribution of wet spell duration using different types of gamma distributions. In: International Conference On Integrated Water Management (Iwm 2010).

Shek, Poi Ngian and Md. Tahir, Mahmood and Tan, Cher Siang and Kueh Ben, Ahmad (2011) Experimental investigation of end-plate connection with cruciform column section. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 3730-3733. ISBN 978-303785127-2

Shek, Poi Ngian (2011) Experimental investigation on full-scale sub-assemblace frame. In: 7th International Conference On Steel & Aluminium Structures (ICSAS 2011).

Shokravi, Hoofar (2011) Effect of circular hole on compressive strength and fracture mechanism of 2D concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sin, Zainal Abidin (2011) Scheduling software as a tool for monitoring and controlling JKR project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siong, Kang Lim and Tung, Chai Ling and Hussin, Mohd. Warid (2011) Ground-granulated blast-furnace slag as potential filler in polyester grout: compressive strength development. ACI Materials Journal, 108 (2). pp. 120-127. ISSN 0889-325X

Subry, Saromy (2011) Maintenance of school buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhatril, M. (2011) The comparison of soil-pile interaction and fixed base support for integral prestressed concrete box-girder bridge. International Journal of Physical Sciences, 6 (28). pp. 6580-6595. ISSN 1992-1950

Sulaiman, S. and Anuar, Aznah Nor and Abdul Razak, A. S. and Chelliapan, S. (2011) Control of structural pest (termites) using empty fruit bunches and mesocarp fibres of oil palm waste. International Journal of Current Research, 3 (11). pp. 215-219. ISSN 0975-833X

Suleiman, Aminu (2011) Determining roadway capacity using direct empirical methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suleiman, Noor Rahim (2011) Performance measurement system for Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

T

Tan, Cher Siang and Mahmood, Md. Tahir and Ngian, Shek Poi and Kueh, Ahmad (2011) Experimental investigation on slip-in connection for cold-formed steel double channel sections. In: International Conference On Civil Engineering, Architecture And Building Materials (CEABM).

Tan, Cher Siang and Md. Tahir, Mahmood and Kueh Beng Hong , Ahmad (2011) Experimental investigation on slip-in connection for cold-formed steel channel sections double. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1038-1041. ISBN 978-303785127-2

Tan, Cher Siang and Tahir, M. M. and Shek, P. N. (2011) Experimental investigation on angle cleat connections for cold-formed steel sections. In: 7th International Conference On Steel & Aluminium Structures (ICSAS 2011).

Tan, Jie Ru (2011) Modification of residual soil with palm oil fuel ash as potential landfill liner. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Tarhuni, Fares Saleh (2011) Improving rutting resistance of concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tiong, Patrick Liq Yee and Adnan, Azlan and Mirasa, Abdul Karim and Abdul Rahman, AhmBaharuddin (2011) Performance of IBS precast concrete beam-column connections under earthquake effects: a literature review. American Journal of Engineering and Applied Sciences, 4 (1). pp. 93-101. ISSN 1941-7020

Tjahjanto, Dwi (2011) Eco-drinage pond in non irrigated land for conservation of land and water based on community participant. In: Seminar On Modelling & Management : Case Studies Using Xpswmm 2D.

Tohid, Zainon (2011) Performance evaluation of consultants for project supervision management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tunji, Lawal Abdul Qayoom and Abdul Latiff, Ab. Aziz and Tjahjanto, Dwi and Akib, Shatirah (2011) The effectiveness of groundwater recharges well to mitigate flood. International Journal of The Physical Sciences, 6 (1). pp. 8-14. ISSN 1992-1950

U

Uka, Orji Kalu (2011) Design of a dredged navigation channel across an offshore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

V

Vafaei, M. and Adn, A. B. and Yadollahi, M. (2011) Seismic damage detection using pushover analysis. Advanced Materials Research, 255-26 . pp. 2496-2499. ISSN 1022-6680

W

Wah, C. K. and Zakaria, R. and Ramli, M. Z. (2011) Visual inspection and detail evaluation for earthquake disaster mitigation. Applied Mechanics and Materials, 90-93 . pp. 3131-3134. ISSN 1660-9336

Wan Husain, Wan Faaizah (2011) The potential of graph model as dispute resolution in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Mohamad, Wan Khairulanuar (2011) Maintenance management of federal roads in Sibu and Bintulu division. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Ming Yien (2011) The importance and allocation of risks in Malaysia construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Y

Yaacob, Dzarif (2011) Project management critical success factors in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yadollahi, Mohammadreza and Mohamad Zin, Rosli (2011) Applied multi-criteria ideal rehabilitation model for budget allocation across road infrastructure. International Journal of Innovation Science, 3 (4). pp. 193-202. ISSN 17572223

Yahaya, Nordin and Ahmed, M. A. Budiea (2011) Near shore environment and its corrosiveness towards steel pipelines. International Journal on Advanced Science, Engineering and Information Technology, 2088-5 (2). pp. 66-69. ISSN 2088-5334

Yahaya, Nordin and Lim, K. S. and Md. Noor, Norhazilan and Othman, S. R. and Abdullah, A. (2011) Effect of clay and moisture content on soil-corrosion dynamic. Malaysian Journal of Civil Engineering, 23 (1). pp. 24-32. ISSN 1823-7843

Yahaya, Nordin and Lim, K. S. and Md. Noor, Norhazilan and Othman, S. R. and Abdullah, A. (2011) Effects of moisture and clay content on soil-corrosion. Malaysian Journal of Civil Engineering, 23 (1). pp. 24-32. ISSN 2079-2557

Yahaya, Nordin and Md. Noor, Norhazilan and Othman, Siti Rabeah and Lim, Kar Sing and Mat Din, Mazura (2011) New technique for studying soil-corrosion of underground pipeline. Journal of Applied Sciences, 11 (9). pp. 1510-1518. ISSN 1812-5654

Yahya, M. A. and Mohamad, M. I. (2011) Review on lean principles for rapid construction. Jurnal Teknologi, 54 . ISSN 0127-9696

Yap, Kah Hoe (2011) Achieving sustainable campus in Malaysia University. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yero, Arafat Suleiman and Hainin, Mohd. Rosli (2011) Influence of organic wax on bitumen characteristics. American Journal of Engineering and Applied Sciences, 4 (2). pp. 265-269. ISSN 1941-7020

Yoo, Jo-Hyeong and Lee, Han-Seung and A. Ismail, Mohamed (2011) An analytical study on the water penetration and diffusion into concrete under water pressure. Construction and Building Materials, 25 . pp. 99-108. ISSN 0950-0618

Yulianti, Ian and M. Supa'at, Abu Sahmah and M. Idrus, Sevia and M. Kassim, Norazan and Al-Hetar, Abdulaziz M. (2011) Fiber bragg grating based ph sensor. AIP Conference Proceedings, 1341 . pp. 424-428. ISSN 0094-243X

Yunusa, Gambo Haruna (2011) Influence of rainfall infiltration and evaporation on suction distribution in soil mass and slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusop, Zulkifli (2011) First flush characterization of stormwater runoff from urban land uses in Malaysia. In: The 4th Iwa-Aspire Conference & Exhibition.

Z

Zakaria, Nurhidayah (2011) The design and construction of post tensioned flat slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Rozana and Ramli, Mohd. Zamri and Choo, Kok Wah (2011) Visual inspection and detail evaluation for earthquake disaster mitigation. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 3131-3134. ISBN 978-303785242-2

Zardasti, Libriati (2011) Second-order inelastic analysis of steel portal frame structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.