Algaifi, H. A. and Mohamed, A. M. and Alsuhaibani, E. and Shahidan, S. and Alrshoudi, F. and Huseien, G. F. and Bakar, S. A. (2021) Optimisation of GBFS, fly ash, and nano-silica contents in alkali-activated mortars. Polymers, 13 (16). ISSN 2073-4360
|
PDF
1MB |
Official URL: http://dx.doi.org/10.3390/polym13162750
Abstract
Although free-cement-based alkali-activated paste, mortar, and concrete have been recog-nised as sustainable and environmental-friendly materials, a considerable amount of effort is still being channeled to ascertain the best binary or ternary binders that would satisfy the requirements of strength and durability as well as environmental aspects. In this study, the mechanical properties of alkali-activated mortar (AAM) made with binary binders, involving fly ash (FA) and granulated blast-furnace slag (GBFS) as well as bottle glass waste nano-silica powder (BGWNP), were opti-mised using both experimentally and optimisation modelling through three scenarios. In the first scenario, the addition of BGWNP varied from 5% to 20%, while FA and GBFS were kept constant (30:70). In the second and third scenarios, BGWNP (5–20%) was added as the partial replacement of FA and GBFS, separately. The results show that the combination of binary binders (FA and GBFS) and BGWNP increased AAM’s strength compared to that of the control mixture for all scenarios. In addition, the findings also demonstrated that the replacement of FA by BGWNP was the most significant, while the effect of GBFS replacement by BGWNP was less significant. In particular, the highest improvement in compressive strength was recorded when FA, GBFS, and BGWNP were 61.6%, 30%, and 8.4%, respectively. Furthermore, the results of ANOVA (p values [removed] 0.9, RAE < 0.1, RSE < 0.013, and RRSE < 0.116) confirmed that all the models were robust, reliable, and significant. Similarly, the data variation was found to be less than 5%, and the difference between the predicted R2 and adj. R2 was very small (<0.2), thus confirming that the proposed non-linear quadratic equations had the capability to predict for further observation. In conclusion, the use of BGWNP in AAM could act as a beneficial and sustainable strategy, not only to address environmental issues (e.g., landfill) but to also enhance strength properties.
Item Type: | Article |
---|---|
Uncontrolled Keywords: | alkali-activated mortars, fly ash, granulated blast-furnace slag |
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
Divisions: | Civil Engineering |
ID Code: | 95142 |
Deposited By: | Narimah Nawil |
Deposited On: | 29 Apr 2022 22:02 |
Last Modified: | 29 Apr 2022 22:02 |
Repository Staff Only: item control page