Al Ghafri, Saif ZS. and Rowland, Darren and Akhfash, Masoumeh and Arami Niya, Arash and Khamphasith, Martin and Xiong, Xiao and Tsuji, Tomoya and Tanaka, Yukio and Seiki, Yoshio and May, Eric F. and Hughes, Thomas J. (2019) Thermodynamic properties of hydrofluoroolefin (R1234yf and R1234ze(E)) refrigerant mixtures: density, vapour-liquid equilibrium, and heat capacity data and modelling. International Journal of Refrigeration, 98 . pp. 249-260. ISSN 0140-7007
Full text not available from this repository.
Official URL: http://dx.doi.org/10.1016/j.ijrefrig.2018.10.027
Abstract
Liquid-phase and vapour-phase densities are reported for the binary refrigerant mixtures (R125 + R1234ze(E)), (R134a + R1234ze(E)), (R143a + R1234ze(E)), (R1234ze(E) + R1234yf), (R125 + R1234yf), (R143a + R1234yf) and (R125 + R152a). The measurements span temperatures from (252 to 294) K and pressures from (0.8 to 4.2) MPa. Vapour-liquid equilibria (VLE) and liquid isobaric heat capacities are also reported for some mixtures. These measurements and previously published data were used to tune binary interaction parameters in existing Helmholtz energy models. Significant improvements in the predicted densities were achieved, for example the root mean squared relative deviation decreased from 0.33% to 0.021% for (R143a + R1234yf). The most significant improvement in the description of VLE occurred for (R1234yf + R1234ze(E)) where the root mean squared deviation in the predicted vapour phase compositions decreased from 0.010 to 0.00084 (a factor of 12).
Item Type: | Article |
---|---|
Uncontrolled Keywords: | density, heat capacity, hydrofluoroolefins |
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) T Technology > TP Chemical technology |
Divisions: | Malaysia-Japan International Institute of Technology |
ID Code: | 87768 |
Deposited By: | Yanti Mohd Shah |
Deposited On: | 30 Nov 2020 13:20 |
Last Modified: | 30 Nov 2020 13:20 |
Repository Staff Only: item control page