Potential of hollow glass microsphere as cement replacement for lightweight foam concrete on thermal insulation performance

Abstract

Global warming can be defined as a gradual increase in the overall temperature of the earth's atmosphere. A lot of research work has been carried out to reduce the heat inside the residence such as the used of low density products which can reduce the self weight, foundation size and construction costs. Foamed concrete it possesses high flow ability, low self-weight, minimal consumption of aggregate, controlled low strength and excellent thermal insulation properties. This study investigate the characteristics of lightweight foamed concrete where Portland cement (OPC) was replaced by hollow glass microsphere (HGMs) at 0%, 3%, 6%, 9% by weight. The density of wet concrete is 1000 kg/m3 were tested with a ratio of 0.55 for all water binder mixture. Lightweight foamed concrete hollow glass microsphere (HGMs) produced were cured by air curing and water curing in tank for 7, 14 and 28 days. A total of 52 concrete cubes of size 100mm x 100mm x 100mm and 215mm x102.5mm x 65mm were produced. Furthermore, Scanning Electron Microscope (SEM) and X-ray fluorescence (XRF) were carried out to study the chemical composition and physical properties of crystalline materials in hollow glass microspheres. The experiments involved in this study are compression strength, water absorption test, density and thermal insulation test. The results show that the compressive strength of foamed concrete has reached the highest in 3% of hollow glass microsphere with less water absorption and less of thermal insulation. As a conclusion, the quantity of hollow glass microsphere plays an important role in determining the strength and water absorption and also thermal insulation in foamed concrete and 3% hollow glass microspheres as a replacement for Portland cement (OPC) showed an optimum value in this study as it presents a significant effect than other percentage.