Study of a fiber optic humidity sensor based on agarose gel

Abstract

An optical fiber humidity sensor was fabricated using a hydrophilic gel (agarose) deposited on the tapered plastic optical fiber (POF). The sensing element, agarose, can absorb and exude moisture from/to the ambience, thereby altering its refractive index and changing its ability to modulate the intensity of light that propagates through the fiber. Thus, the operating principle of the sensor is based on the intensity modulation technique, which utilizes a tapered POF probe coated with agarose that is sensitive to humidity. The POF, which was fabricated using an etching method, has a waist diameter of 0.45 mm and tapering length of 10 mm. As the relative humidity varies from 50% to 80%, the output voltage of the sensor with agarose gel of 0.5% weight content decreases linearly from 2.24 mV to 1.55 mV. The agarose-based sensor produces a sensitivity of 0.0228 mV/%, with a slope linearity of more than 98.36%. The tapered fiber with agarose gel of 1% weight content produces a sensitivity of 0.0103 mV/% with a slope linearity of more than 94.95% and a limit of detection of 2.635%, while the tapered fiber with agarose gel of 1.5% weight content produces a sensitivity of 0.0079 mV/% with a slope linearity of more than 98.53% and a limit of detection of 6.853%. The fiber with agarose gel of 0.5% weight content shows higher sensitivity compared to that of 1% and 1.5% due to the effect of pore size, which changes with concentration. The results demonstrate that agarose-based optical fiber sensors are both sensitive and efficient for economical and flexible measurements of humidity.