Sulaiman, Muhd. Fauzy and Redzuan, Faisal Amsyar and Chau, Khun Ma and Awang, Abdullah Zawawi and Omar, Wahid (2017) Bond between SSTT confined concrete and ribbed steel reinforcement bar. Transactions on Science and Technology, 4 (3). pp. 194-201. ISSN 2289-8786
Full text not available from this repository.
Official URL: http://tost.unise.org/pdfs/vol4/no3/4x3x194x201.pd...
Abstract
A study about bond strength of normal strength concrete (NSC) and Steel Strap Confining Technique (SSTT) confined NSC was presented. A series of 8 specimens pull-out test were carried out to investigate the bond strength of short embedment (5Db) in SSTT confined NSC. The concrete compressive strength was about 45 MPa meanwhile the 12mm diameter reinforcement tensile strength was about 500 MPa were used in the pull-out specimens. In order to determine the effects of lateral confinement pressure of steel strapping, three groups of different steel strap gap distance pull-out test were conducted and compared with control specimens and previous theoretical bond stress equation. It was found that SS-B pull-out specimen exhibited highest bond strength and about 40 percent higher compared with Cont-B specimen as lowest bond strength pull-out specimen in this study.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Bond strength, Lateral confinement pressure, Steel strap, Confinement method, Active confinement |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) |
| Divisions: | Civil Engineering |
| ID Code: | 84694 |
| Deposited By: | Fazli Masari |
| Deposited On: | 29 Feb 2020 12:29 |
| Last Modified: | 29 Feb 2020 12:29 |
Repository Staff Only: item control page
