Sediment transport and morphodynamics generated by a dam-break swash uprush: coupled vs uncoupled modeling

Abstract

The present work analyzes the hydro-morphodynamics characterizing the swash region during the uprush stage. A comparison is illustrated between the sediment transport measured in a series of dam-break experiments and that predicted by the numerical hydro-morphodynamic model of Postacchini et al. (2012). The primary aim is to investigate the differences arising between the weakly coupled or uncoupled model and the measurements, in terms of hydrodynamics, tip celerity and sediment transport. The hydrodynamics are well described by the model and results have been used to calibrate both friction factor and subgrid turbulent viscosity. Comparison of numerically-computed tip celerity with experimental data reveals a fairly good agreement, i.e. a mean error of about 10%, while modeled sediment transport differs by about 40% from the available data. No evident differences are found between results obtained from the coupled and uncoupled model runs (2% for the celerity and 11% for the sediment transport rate at the tip), suggesting that for the specific flow under investigation, at the leading edge of the swash front, hydro-morphological coupling is not an issue of fundamental importance. However, for the special case here of a swash forced by a dam-break, scour occurs at the dam location, and in this case the erosion of the bed is significantly larger in the uncoupled model.