Universiti Teknologi Malaysia Institutional Repository

Fabrication, characterisation and durability performance of kenaf fibre reinforced epoxy, vinyl and polyester-based polymer composites

Razavi, Meisam and Ogunbode, Ezekiel B. and Nyakuma, Bemgba B. and Razavi, Masoud and M. Yatim, Jamaludin and Lawal, Temitope A. (2023) Fabrication, characterisation and durability performance of kenaf fibre reinforced epoxy, vinyl and polyester-based polymer composites. Biomass Conversion and Biorefinery, 13 (10). pp. 9165-9180. ISSN 2190-6815

Full text not available from this repository.

Official URL: http://dx.doi.org/10.1007/s13399-021-01832-z

Abstract

In this study, Kenaf fibre–reinforced polymer (KFRP) composites containing 10%, 30% and 40% of fibre volume fractions were produced to examine the effects of ageing on the polymer composites. The samples were exposed to a laboratory environment (the control sample), outdoor environment, along with immersion in water and acid (5 wt.%, H2SO4) for 12- and 24-month exposure periods. The control samples were stored under normal and darkroom conditions followed by the comprehensive characterisation of the physical properties and mechanical performance attributes of the composites. The results revealed significant surface degradation, while fungal growth, surface roughness and discolouration were observed on sample surfaces exposed to outdoor conditions after 12 and 24 months. The unexposed samples displayed higher tensile and compressive properties compared to the exposed samples. The higher fibre volume fractions resulted in higher mechanical properties and weathering degradation. The tensile strength of the Kenaf/epoxy composite with a fibre volume content of 40% was 31%, which is 133% higher than the 10% and 30% fractions. Kenaf/vinyl ester composites displayed the highest mechanical properties followed by the Kenaf/polyester and Kenaf/epoxy composites after 12- and 24-month ageing. Therefore, the KFRP composites are suited for lumber-based floor finishing, wall panels, ceiling finishing, doors and windows panels.

Item Type:Article
Uncontrolled Keywords:Ageing, Kenaf, Natural fibres, Polymer composites, Reinforced polymers, Resin
Subjects:T Technology > TA Engineering (General). Civil engineering (General)
Divisions:Civil Engineering
ID Code:105505
Deposited By: Widya Wahid
Deposited On:30 Apr 2024 08:06
Last Modified:30 Jun 2024 00:38

Repository Staff Only: item control page