Items where Year is 2023

Article

Mafroos, Mahroof Mohamed and Nur Ameelia, Nur Ameelia and Jameela, Husni Hani and Hamzah, Azura (2023) Characterizing passively Q-switched fiber laser in LIDAR application. International Journal of Integrated Engineering, 15 (3). pp. 170-176. ISSN 2229-838X

Hamzah, Muhammad Hazwan and Ibrahim, Siti Khairunnisa and Mohd. Nor, Mohd. Zuhair and Hamzah, Adila Fazliyana Aili and Shamsudin, Rosnah and Md. Ali, Abd. Halim (2023) Optimization of electrochemical pre-treatment for essential oil extraction from lemon myrtle (B. citriodora) leaves by response surface methodology. Journal of Food Measurement and Characterization, 17 (4). pp. 3732-3744. ISSN 2193-4126

Khairi, Ahmad Adzlan Fadzli and Yassin, Abdullah and Abang Kamaruddin, Abang Mohammad Nizam and Mat Ali, Mohamed Sukri and Maruai, Nurshafinaz (2023) Numerical simulation of drying process within a novel rotary drying machine for palm oil sludge. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 33-42. ISSN 2289-7895

Mohamad Rashid, Nur Nadhirah and Ahmad, Harith and Ismail, Mohammad Faizal and Zuikafly, Siti Nur Fatin and Nordin, Nur Azmah and Koga, Tsuyoshi and Yahya, Wira Jazair and Yahaya, Hafizal and Ahmad, Fauzan (2023) Passively Q-switched thulium-holmium doped fibre laser with electrochemical exfoliation graphene in chitin based passive saturable absorber. Journal of Advanced Research in Micro and Nano Engineering, 11 (1). pp. 1-14. ISSN 2756-8210

Xiao, Xiong and Kim, Dongchan and Jiao, Fuyu and Yang, Xiaoxian and Al Ghafri, Saif and Siahvashi, Arman and Tsuji, Tomoya and Yukumoto, Atsuhiro and Seiki, Yoshio and Stanwix, Paul L. and May, Eric F. (2023) Viscosity, thermal conductivity, and interfacial tension study of CO2+difluoromethane (R32). International Journal of Refrigeration, 152 (NA). pp. 331-342. ISSN 0140-7007

A. Ghafar, Nawal and Che Jusoh, Nurfatehah Wahyuny and Jamian, Nor Ruwaida (2023) Effect of gas compositions on binary CO2-N2 adsorption of pomelo peel-based activated carbon. Chemical Engineering Transactions, 106 (NA). pp. 1099-1104. ISSN 2283-9216

Abbasi, Milad and Gholizadeh, Razieh and Kasaee, Seyed Reza and Vaez, Ahmad and Chelliapan, Shreeshivadasan and Al‑Qaim, Fouad Fadhil and Deyab, Issa Farhan and Shafiee, Mostafa and Zareshahrabadi, Zahra and Amani, Ali Mohammad and Mosleh Shirazi, Sareh and Kamyab, Hesam (2023) An intriguing approach toward antibacterial activity of green synthesized Rutin-templated mesoporous silica nanoparticles decorated with nanosilver. Scientific Reports, 13 (1). pp. 1-12. ISSN 2045-2322

Abd. Ghafar, Nawal and Jamian, Norruwaida and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny (2023) Binary carbon dioxide and nitrogen adsorption on pomelo peel-derived porous sorbent. Chemical Engineering Research and Design, 199 (NA). pp. 21-32. ISSN 0263-8762

Abd. Rahman, Amirah and Kamardin, Kamilia and Yamada, Yoshihide and Takahashi, Masaharu (2023) Near-field microwave focusing evaluation of dielectric lens antenna for human body model. Indonesian Journal of Electrical Engineering and Computer Science, 29 (1). pp. 161-173. ISSN 2502-4752

Abdul Aziz, Nur’Afiqah and Zuikafly, Siti Nur Fatin and Lokman, Muhammad Quisar and Harun, Sulaiman Wadi and Ahmad, Fauzan (2023) Zinc oxide nanoparticles-poly(vinyl) alcohol thin film for generation Q-switched erbium-doped fiber laser. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 228-237. ISSN 2462-1943

Abdul Bujang, Siti Dianah and Selamat, Ali and Krejcar, Ondrej and Mohamed, Farhan and Lim, Kok Cheng and Po, Chan Chiu and Fujita, Hamido (2023) Imbalanced classification methods for student grade prediction: A systematic literature review. IEEE Access, 11 (NA). pp. 1970-1989. ISSN 2169-3536

Abdul Hamid, Mohamad Ihsan and Abd Fatah, Abdul Yasser and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Nordin, Nur Azmah (2023) Force and stiffness behavior of natural rubber based magnetorheological elastomer bushing. International Journal Of Applied Electromagnetics And Mechanics, 71 (1). pp. 1-19. ISSN 1383-5416

Abdul Hamid, Mohamad Ihsan and Mazlan, Saiful Amri and Nordin, Nur Azmah and Abd. Fatah, Abdul Yasser and Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Ismail, Izwan (2023) Design and dynamic stiffness evaluation of magnetorheological elastomer bushing using FEMM and dynamic testing machine. Journal of Mechanical Engineering, 20 (1). pp. 43-60. ISSN 1823-5514

Abdul Jabar, Muhammad Hussin and Srivastava, Rishita and Abdul Manaf, Norhuda and Thangalazhy-Gopakumar, Suchithra and Ab. Latif, Farah Ezzah and Luu, Minh Tri and Abbas, Ali (2023) The solar end game: bibliometric analysis, research and development evolution, and patent activity of hybrid photovoltaic/thermal—phase change material. Environmental Science and Pollution Research, 30 (55). pp. 116934-116951. ISSN 0944-1344

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Hydrogen fuel cell technology revolution and intervention using TRIZ S-curve analysis for automotive system innovation. Chemical Engineering and Technology, 46 (12). pp. 2590-2599. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Innovation process of hydrogen fuel cell storage technology using the theory of inventive problem solving (TRIZ). Chemical Engineering and Technology, 46 (12). pp. 2635-2643. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Patented technology innovation portfolio in producing biofuel using the theory of inventive problem solving (TRIZ) methodology. Chemical Engineering and Technology, 46 (12). pp. 2654-2660. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib and Abdul Rahim, Nor Azian and Ohshima, Naoki (2023) Sustainable industrial revolution competency framework for 5G technology applications using TRIZ. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 336-344. ISSN 2462-1943

Abdul Rahman, Hasbullah and Rahman, Md. Mujibur and Yahya, Wira Jazair and Kaonain, Tamanna E. and Abd Kadir, Hasannuddin and Mohd. Tamam, Mohamad Qayyum and Ithnin, Ahmad Muhsin and Ahmad, Fauzan and Abdullah, Mohd. Fareez Edzuan and Noge, Hirofumi and Hong, Chungpyo and Otaka, Takeshi (2023) Implementation of a non-surfactant water-in-diesel emulsion fuel in a common rail direct injection diesel vehicle. International Journal of Automotive Technology, 24 (5). pp. 1349-1358. ISSN 1229-9138

Abu Bakar, Shahirah and Md. Arifin, Norihan and Pop, Ioan (2023) Stability analysis on mixed convection nanofluid flow in a permeable porous medium with radiation and internal heat generation. Journal of Advanced Research in Micro and Nano Engineering, 13 (1). pp. 1-17. ISSN 2756-8210

Adi Wijaya, Adi Wijaya and Noor Akhmad Setiawan, Noor Akhmad Setiawan and Shapiai, Mohd. Ibrahim (2023) Mapping research themes and future directions in learning style detection research: A bibliometric and content analysis. Electronic Journal of e-Learning, 21 (4). pp. 274-285. ISSN 1479-4403

Adiputra, Dimas and Asfari, Ully and Ubaidillah, Ubaidillah and Abdul Rahman, Mohd. Azizi and Harun, Ahmad Mukifza (2023) Immediate effect evaluation of a robotic ankle–foot orthosis with customized algorithm for a foot drop patient: a quantitative and qualitative case report. International Journal of Environmental Research and Public Health, 20 (4). pp. 1-13. ISSN 1661-7827

Ahmad, Iftikhar and Lim, Meng Hee and Abdelrhman, Ahmed M. and Imam, Syed Asad and Leong, M. S. (2023) Development, characterization, and power management of electromagnetic-type hybrid vibro-acoustic energy harvester for wireless sensor nodes. Sensors and Actuators A: Physical, 351 (NA). NA. ISSN 0924-4247

Ahmad, Imran and Abdullah, Norhayati and Koji, Iwamoto and Yuzir, Ali and Ahmad, Mohd. Danish and Nova Rachmadona, Nova Rachmadona and Al-Dailami, Anas and Show, Pau Loke and Khoo, Kuan Shiong (2023) Micro and macro analysis of restaurant wastewater containing fat, oil, grease (fog): an approach based on prevention, control, and sustainable management. Chemosphere, 325 (NA). NA-NA. ISSN 0045-6535

Ahmad, Imran and Ibrahim, Natasha Nabila and Abdullah, Norhayati and Iwamoto, Koji and Mohamad, Shaza Eva and Khoo, Kuan Shiong and Cheah, Wai Yan and Ling, Tau Chuan and Show, Pau Loke (2023) Bioremediation strategies of palm oil mill effluent and landfill leachate using microalgae cultivation: An approach contributing towards environmental sustainability. Chinese Chemical Letters, 34 (5). NA-NA. ISSN 1001-8417

Ahmad, Nurul ‘Uyun and Mad Nordin, Mariam Firdhaus and Mokhtar, Norrashidah and Mohamad Abdul Wahab, Izzati and Mohamad, Mardawani and Tan, Ka Liong and Mohd. Amir, Siti Nur Khairunisa (2023) Zingiber zerumbet: pharmacological values of zerumbone and the extraction technology evolution. Jurnal Teknologi, 85 (2). pp. 21-30. ISSN 0127-9696

Ahmad Asmadi, Adilah and Tamunaidu, Pramila and Goto, Masafumi and Utsumi, Motoo (2023) Effects of rice husk and rice straw hydrochar as soil amendment. Chemical Engineering Transactions, 106 (NA). pp. 1225-1230. ISSN 2283-9216

Ahmad Khairi, Muntaz Hana and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Mohamed Khaidir, Rahayu Emilia and Nordin, Nur Azmah and Faizal Johari, Mohd. Aidy and Abdul Aziz, Siti Aishah and Tan Shilan, Salihah and Choi, Seung Bok (2023) The effect of salt water ageing on the mechanical and rheological properties of magnetorheological elastomer. Scientific Reports, 13 (1). pp. 1-8. ISSN 2045-2322

Ahmad Masudi, Ahmad Masudi and Muraza, Oki and Che Jusoh, Nurfatehah Wahyuny and Ubaidillah, Ubaidillah (2023) Improvements in the stability of biodiesel fuels: Recent progress and challenges. Environmental Science and Pollution Research, 30 (6). pp. 14104-14125. ISSN 0944-1344

Ahmad Sabri, Nurul Syazwani and Kamardan, Muhammad Imran Firdaus and Wong, Shi Xuan and Azman, Nadia Farhana and Md. Akhir, Fazrena Nadia and Othman, Nor'azizi and Awang, Norkumala and Kuroki, Yutaka and Hara, Hirofumi (2023) Future aspects of insects' ingestion in Malaysia and Indonesia for human well-being and religion regulation. Future FoodsVolume, 8 (NA). pp. 1-16. ISSN 2666-8335

Ahmad Sukri, Ikmal Alif and Fukuda, Kanao and Kamis, Shahira Liza and Mat Tahir, Noor Ayuma (2023) Tribological properties improvement of 3D-printed parts by in-process addition of graphite particles into the top layer. Jurnal Tribologi, 39 (NA). pp. 134-142. ISSN 2289-7232

Aiman Rosol, Ahmad Haziq and Hamzah, Azura and Zulkipli, Nur Farhanah and Harun, Sulaiman Wadi (2023) Ti3C2Tx saturable absorber (SA) as Q-switched initiator in passive neodymium doped fiber laser (NDFL). Optical Fiber Technology, 81 (NA). NA. ISSN 1068-5200

Akter, Ayesha and Goto, Masafumi and Megat Mohd. Noor, Megat Johari and Parvez, Ahmed and Khanam, Shamsunnahar and Siddique, Md. Abu Bakar and Hossain, Md. Faysal and Kormoker, Tapos (2023) Immobilization of heavy metals in tannery sludge by the formation of tobermorite in subcritical water treatment with rice husk silica. RSC Advances, 13 (16). pp. 10610-10620. ISSN 2046-2069

Al Rizeiqi, Nasser and Azzouz, Amirah and Liew, Peng Yen (2023) Multi-criteria evaluation of large-scale hydrogen storage technologies in oman using the analytic hierarchy process. Chemical Engineering Transactions, 106 (NA). pp. 1117-1122. ISSN 2283-9216

Al Rizeiqi, Nasser and Jedda, M. and Liew, Peng Yen (2023) Silica sand as thermal energy storage for renewable-based hydrogen and ammonia production plants. Chemical Engineering Transactions, 106 (NA). pp. 1111-1116. ISSN 2283-9216

Alhassan, Yusuf and Kunya, Bashir Isyaku and Che Sidik, Nor Azwadi (2023) Numerical analysis of wind turbine performance using different blade materials under wind load deflection. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 1-11. ISSN 2289-7879

Ali, N. A. and Ismail, M. and Nasef, M. M. and Jalil, A. A. (2023) Enhanced hydrogen storage properties of NaAlH4 with the addition of CoTiO3 synthesised via a solid-state method. Journal of Alloys and Compounds, 934 (167932). NA-NA. ISSN 0925-8388

Ali, N. A. and Sazelee, N. A. and Md. Din, M. F. and Nasef, M. M. and Jalil, A. A. and Liu, Haizen and Ismail, M. (2023) Ameliorating the re/dehydrogenation behaviour of MgH2 by zinc titanate addition. Journal of Magnesium and Alloys, 11 (6). pp. 2205-2215. ISSN 2213-9567

Ali Khorsand Zak, Ali Khorsand Zak and Hashim, Abdul Manaf and Esmaeilzadeh, Javad (2023) XPS studies and Kramers-Kronig analysis of the optical properties of ZnO/SnO2 nanocomposites synthesized by gelatin-based sol-gel method. Optical Materials, 142 (NA). NA. ISSN 0925-3467

Amzah, Nur Faiqah and Mohamad, Shaza Eva and Md. Akhir, Fazrena Nadia and Othman, Fatin Syahirah and Suzuki, Iwane and Maeda, Yoshiaki (2023) Effect of agitation on growth and fatty acid composition of green microalgae acutodesmus obliquus Q2-12E. Chemical Engineering Transactions, 106 (NA). pp. 1231-1236. ISSN 2283-9216

Andi Taufan, Andi Taufan and Shaikh Salim, Sheikh Ahmad Zaki and Ng, Wai Tuck and Singh, Manoj Kumar and Rijal, Hom Bahadur (2023) Energy-efficient retrofitting strategies in mosque buildings: a review. Renewable and Sustainable Energy Reviews, 183 (NA). NA. ISSN 1364-0321

Aswadi, Muhammad Aisar Harraz and Abdul Halim, Hairul Nazirah and Nasaruddin, Nur Farhana Najwa and Mahmad Rozi, Siti Khalijah and Mokhtar, Zulfakar and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny (2023) Kinetics and Effects of Process Parameters on Oil Adsorption using Activated Carbon from Rubber Seed Kernels (Hevea brasiliensis). Chemical Engineering Transactions, 106 (NA). pp. 991-996. ISSN 2283-92161

Awang Lah, Airull Azizi and Sulaiman, Abdul Hadi and Abdullah, Fairuz and Ambran, Sumiaty and Ng, Eng Khoon and Alresheedi, Mohammed Thamer and Mahdi, Mohd. Adzir and Md. Yusoff, Nelidya (2023) Stable triple-wavelength random fiber laser based on fiber Bragg gratings. Photonics, 11 (8). pp. 1-10. ISSN 2304-6732

Azhar, Aisyah Alya Nureena and Abdul Manaf, Norhuda and Yabar, Helmut F. (2023) Artificial neural network model for palm oil biomass gasification process prediction. Chemical Engineering Transactions, 106 (NA). pp. 1237-1242. ISSN 2283-9216

Baharom, Bazilah and Sugimoto, Yoshiki and Bakar, Rohani and Kunio, Sakakibara and Nobuyoshi, Kikuma and Abd. Rahman, Nurul Huda (2023) 2 × 2 Lens array antenna using square-bottom concave-convex lens in 300-GHz band. IEEE Open Journal of Antennas and Propagation, 4 . pp. 1074-1086. ISSN 2637-6431

Basarudin, Hafiz and Mohd. Yunus, Noor Hidayah and Ramli, Aizat Faiz and Mansor, Zuhanis and Sali, Aduwati and Gan, Hong Seng and Abu, Mohd. Azlan (2023) Evaluation of climate change effects on rain rate distribution in Malaysia using hydro-estimator for 5G and microwave links. Engineering, Technology and Applied Science Research, 13 (4). pp. 11064-11069. ISSN 2241-4487

Basir, Amirah and Kamis, Shahira Liza and Fukuda, Kanao and Mat Tahir, Noor Ayuma (2023) Tribological behaviour of multi-shape photochemical textured surfaces. Surface Topography: Metrology and Properties, 11 (2). NA. ISSN 2051-672X

Batool, Uzma and Shapiai, Mohd. Ibrahim and Mostafa, Salama A. and Ibrahim, Mohd. Zamri (2023) An attention-augmented convolutional neural network with focal loss for mixed-type wafer defect classification. IEEE Access, 11 . pp. 108891-108905. ISSN 2169-3536

Bulya Nazim, Nur Julia Nazim and Abdullah, Mohd. Faizol and Mat Hussin, Mohd. Rofei and Mohamad Badaruddin, Siti Aishah and Hashim, Abdul Manaf (2023) Maximizing the thermal hotspot reduction by optimizing the thickness of multilayer hBN heat spreader. Materials Science in Semiconductor Processing, 158 (NA). NA. ISSN 1369-8001

Casas, Gianmarco Goycochea and Ismail, Zool Hilmi and Limeira, Mathaus Messias Coimbra and Lopes da Silva, Antonilmar Araújo and Leite, Helio Garcia (2023) Automatic detection and counting of stacked eucalypt timber using the YOLOv8 model. Forests, 14 (12). pp. 1-13. ISSN 1999-4907

Chan, Kar Fei and Mohd. Zaid, Mohd. Hafiz and Mamat, Md. Shuhazlly and Tanemura, Masaki and Khamis, Shahira Liza and Miyazaki, Hidetoshi and Maruyama, Takahiro and Sako, Katsuya and Sharma, Kamal Prasad and Osman, Nurul Huda and Sa'at, Nor Kamilah and Mazlan, Hazeem Ikhwan and Yaakob, Yazid (2023) Experimental investigation on thermal properties of carbon nanotubes/zinc silicate composites prepared by powder processing. Diamond and Related Materials, 134 (NA). NA-NA. ISSN 0925-9635

Chang, Seong Hong and Tan, Sin Jin and Diblawe, Abdulkadir Mukhtar and Tiu, Zian Cheak and Cheng, Xiau San and Ahmad, Fauzan and Harun, Sulaiman Wadi (2023) Optical modulation in Er-doped fiber laser delivering dark pulse utilizing side polished fiber coated with Ti3AlC2 as saturable absorber. Materials Research Express, 10 (9). pp. 1-7. ISSN 2053-1591

Chit, Viesuieda and Tan, Lian See and Kiew, Peck Loo and Tsuji, Tomoya and Funazukuri, Toshitaka and Lock, Serene Sow Mun (2023) Advancing process intensification with high-frequency ultrasound: a mini-review of applications in biofuel production and beyond. Processes, 11 (4). pp. 1-17. ISSN 2227-9717

Chong, Jun Wei Roy and Khoo, Kuan Shiong and Chew, Kit Wayne and Vo, Dai-Viet N and Balakrishnan, Deepanraj and Banat, Fawzi and Heli Siti Halimatul Munawaroh, Heli Siti Halimatul Munawaroh and Koji, Iwamoto and Show, Pau Loke (2023) Microalgae identification: Future of image processing and digital algorithm. Bioresource Technology, 369 (NA). NA-NA. ISSN 0960-8524

Choo, Hau Sim and Ooi, Chia Yee and Ismail, Nordinah and Inoue, Michiko and Kok, Chee Hoo (2023) Improving hardware trojan detection coverage by utilizing features at different abstraction levels. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 73-86. ISSN 2462-1943

Cimr, Dalibor and Busovsky, Damian and Fujita, Hamido and Studnicka, Filip and Cimler, Richard and Hayashi, Toshitaka (2023) Classification of health deterioration by geometric invariants. Computer Methods and Programs in Biomedicine, 239 (NA). pp. 1-9. ISSN 0169-2607

Cimr, Dalibor and Fujita, Hamido and Tomaskova, Hana and Cimler, Richard and Selamat, Ali (2023) Automatic seizure detection by convolutional neural networks with computational complexity analysis. Computer Methods and Programs in Biomedicine, 229 (NA). NA-NA. ISSN 0169-2607

Deng, Tingquan and Yang, Ge and Huang, Yang and Yang, Ming and Fujita, Hamido (2023) Adaptive multi-granularity sparse subspace clustering. Information Sciences, 642 (119143). NA-NA. ISSN 0020-0255

Dhamanti, Inge and Suwantika, Auliya A. and Adlia, Amirah and Yamani, Laura Navika and Yakub, Fitri (2023) Adverse reactions of COVID-19 vaccines: a scoping review of observational studies. International Journal of General Medicine, 16 (NA). pp. 609-618. ISSN 1178-7074

Dhamanti, Inge and Suwantika, Auliya A. and Adlia, Amirah and Yamani, Laura Navika and Yakub, Fitri (2023) Assessment of the potential of tidal range energy in Malaysian Exclusive Economic Zone (EEZ) using multi-mission satellite altimetry data. International Journal of General Medicine, 16 (NA). pp. 609-618. ISSN 1178-7074

Dobrovolny, Michal and Benes, Jakub and Langer, Jaroslav and Krejcar, Ondrej and Selamat, Ali (2023) Study on sperm-cell detection using YOLOv5 architecture with labaled dataset. Genes, 14 (2). pp. 1-14. ISSN 2073-4425

Ee, Sun Heng and Liew, Peng Yen and Abdul Wahab, Abdul Syakir and Mohammad Rozali, Nor Erniza (2023) Spatial total site heat integration considering energy losses. Chemical Engineering Transactions, 103 (NA). pp. 913-918. ISSN 2283-9216

Eissa, Noureldin and Khairuddin, Uswah and Yusof, Rubiyah and Ahmed Madani, Ahmed Madani (2023) A metaheuristic technique for cluster-based feature selection of DNA methylation data for cancer. Computers, Materials and Continua, 74 (2). pp. 2817-2838. ISSN 1546-2218

El-Saleh, Ayman A. and Alhammadi, Abdulraqeb and Shayea, Ibraheem and Hassan, Wan Haslina and Honnurvali, Mohamed Shaik and Daradkeh, Yousef Ibrahim (2023) Measurement analysis and performance evaluation of mobile broadband cellular networks In a populated city. Alexandria Engineering Journal, 66 (NA). pp. 927-946. ISSN 1110-0168

Fang, Jin and Guo, Xin and Liu, Yujia and Chang, Xiaokun and Fujita, Hamido and Wu, Jian (2023) An attention-based deep learning model for multi-horizon time series forecasting by considering periodic characteristic. Computers and Industrial Engineering, 185 (NA). NA-NA. ISSN 0360-8352

Farahany, Saeed and Ziaie, Mehdi and Nordin, Nur Azmah (2023) Effect of triple tempering temperature on microstructure, mechanical, and wear properties of K340 cold work tool steel. Journal of Materials Engineering and Performance, 32 (20). pp. 9000-9010. ISSN 1059-9495

Fitriady, M. A. and Rahmat, N. A. and Mohammad, A. F. (2023) Vertical and spanwise wake flow structures of a single spire over smooth wall surface in a wind tunnel. Journal of Applied Fluid Mechanics, 16 (12). pp. 2459-2470. ISSN 1735-3572

Fitriady, M. A. and Rahmat, N. A. and Mohammad, A. F. and Zaki, S. A. (2023) Effect of mesh refinement on vertical and lateral velocity profiles of the wake flow behind a spire using computational fluid dynamic (CFD). Journal of Engineeringand Technology (JET), 14 (2). pp. 107-120. ISSN 2289-814X

Fitriady, M. A. and Rahmat, N. A. and Mohammad, A. F. and Zaki, S. A. (2023) Numerical simulation of the boundary layer development behind a single quarter elliptic-wedge spire. Journal Of Mechanical Engineering And Sciences, 17 (2). pp. 9421-9432. ISSN 2289-4659

Ghulam Asrofi Buntoro, Ghulam Asrofi Buntoro and Indah Puji Astuti, Indah Puji Astuti and Wahna Widhianingrum, Wahna Widhianingrum and Arifin, Rizal and Kuntang Winangun, Kuntang Winangun and Selamat, Ali (2023) Knowledge management system for handcrafted Reog Ponorogo products. Electronic Journal of Knowledge Management, 21 (2). pp. 130-139. ISSN 1479-4411

Gorment, Nor Zakiah and Selamat, Ali and Cheng, Lim Kok and Krejcar, Ondrej (2023) Machine learning algorithm for malware detection: taxonomy, current challenges, and future directions. IEEE Access, 11 . pp. 141045-141089. ISSN 2169-3536

Grace Erlinda Harimisa, Grace Erlinda Harimisa and Che Jusoh, Nurfatehah Wahyuny and Tan, L. S. and Ghafar, N. A. (2023) Influence of furnace atmospheres and potassium hydroxide activation on the properties of bamboo activated carbon and its adsorption towards 4-nitrophenol. Chemical Engineering Research and Design, 198 (NA). pp. 325-339. ISSN 0263-8762

Halimi, Siti Nur Atiqah and Abdul Rahman, Mohd. Azizi and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar (2023) Monocular distance estimation-based approach using deep artificial neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 107-119. ISSN 2462-1943

Halimi, Siti Nur Atiqah and Abdul Rahman, Mohd. Azizi and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar and Yahya, Wira Jazair and Abu Kassim, Khairil Anwar and Abas, Mohd. Azman and Syed Yusoff, Syed Zaini Putra (2023) Monocular distance estimation-based approach using deep artificial neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 107-119. ISSN 2462-1943

Halimi, Siti Nur Atiqah and Susijanto Tri Rasmana, Susijanto Tri Rasmana and Dimas Adiputra, Dimas Adiputra and Yahya, Wira Jazair and Abdul Rahman, Mohd. Azizi and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar and Abu Kassim, Khairil Anwar (2023) A review of safety test methods for new car assessment program in Southeast Asian countries. Open Engineering, 13 (1). pp. 1-16. ISSN 2391-5439

Haque, Fahmida and Reaz, Mamun B. I. and Chowdhury, Muhammad E. H. and Shapiai, Mohd. Ibrahim and A. Malik, Rayaz and Mohammed Alhatou, Mohammed Alhatou and Kobashi, Syoji and Iffat Ara, Iffat Ara and M. Ali, Sawal H. and A. Bakar, Ahmad A. and Bhuiyan, Mohammad Arif Sobhan (2023) A machine learning-based severity prediction tool for the Michigan neuropathy screening instrument. Diagnostics, 13 (2). pp. 1-16. ISSN 2075-4418

Harun, Aizul Nahar and Maspo, Nur Adib and Md. Issa, Nurhayati and Matsuura, Yoshiyuki and Chuprat, Suriayati and Mohd. Mahadzir, Akbariah and Haron, Nuzul Azam and Mohd. Nawi, Mohd Nasrun (2023) Automotive technology and patent assignee in Malaysia: an exploratory patent. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 417-432. ISSN 2462-1943

Harun, Mohamad Haniff and Abdullah, Shahrum Shah and Mohd. Aras, Mohd. Shahrieel and Bahar, Mohd. Bazli and Ali, Fariz (2023) 3D collision avoidance system for unmanned aerial vehicle (UAV) with decentralized approach. IIUM Engineering Journal, 24 (2). pp. 373-390. ISSN 1511-788X

Hashim, Hasnatul Azwani and Jamian, Nor Ruwaida and Yusuf, Sara Yasina and Dewika Naidu, Dewika Naidu and Mohd. Paad, Khairunnisa and Ishak, Nur Fatiha (2023) Evaluation of deposited atmospheric microplastic characteristic within Malaysia cities airshed. Chemical Engineering Transactions, 106 (NA). pp. 1105-1110. ISSN 2283-9216

Hayashi, Toshitaka and Cimr, Dalibor and Fujita, Hamido and Cimler, Richard (2023) Image entropy equalization: a novel preprocessing technique for image recognition tasks. Information Sciences, 647 (119539). NA-NA. ISSN 0020-0255

Hong, Chua Kiang and Abu, Mohd. Azlan and Shapiai, Mohd. Ibrahim and Haniff, Mohamad Fadzli and Mohamad, Radhir Sham and Abu, Aminudin (2023) Analysis of wind speed prediction using artificial neural network and multiple linear regression model using tinyml on Esp32. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107 (1). pp. 29-44. ISSN 2289-7879

Hong, Chungpyo and Katanoda, Hiroshi and Asako, Yutaka and Faghri, Mohammad (2023) Temperature recovery factor for gaseous nitrogen flow in a microtube. International Journal of Heat and Mass Transfer, 202 (123688). pp. 1-23. ISSN 0017-9310

Ilmasari, Dhaneswara and Yuniarto, Adhi and Khen, Chanlyda and Purba, Laila Dina Amalia and Lei, Zhongfang and Yuzir, Ali (2023) Microalgal-bacterial aerobic granular sludge for old leachate treatment: development, performance, and lipid production. Journal of Cleaner Production, 417 (138053). NA-NA. ISSN 0959-6526

Ilmiawan, Fakhrizal Akbar and Zaki, Sheikh Ahmad (2023) Application of flywheel energy storage on generator-set. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 78-87. ISSN 2289-7879

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni (2023) Understanding the potential of hydrogen as a game-changing energy source. Chemical Engineering and Technology, 46 (12). pp. 2577-2582. ISSN 0930-7516

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni and Ohshima, Naoki (2023) Enhancing workforce performance and applications toward industry 5.0 with the 5G conceptual framework in Malaysia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 282-289. ISSN 2462-1943

Jaafar, Afiza Nur and Ja'afar, Hajar and Yamada, Yoshihide and Sadeghikia, Fatemeh and Ibrahim, Idnin Pasya and Mahmood, Mohd. Khairil Adzhar (2023) Design of an axial mode helical antenna with buffer layer for underwater applications. International Journal of Electrical and Computer Engineering, 13 (1). pp. 473-482. ISSN 2088-8708

Jaidi, Eisya Umaira and Mad Nordin, Mariam Firdhaus and Mohd. Kassim, Angzzas Sari (2023) Wall material formulations for Zingiberaceae family Rhizome extracts (Curcuma longa, Curcuma xanthorriza and Zingerol officinale) on microencapsulation efficiency of spray drying processing. Progress in Engineering Application and Technology (PEAT), 4 (1). pp. 1-12. ISSN 2773-5303

Jawaid, Mohammad and Singh, Balbir and Kian, Lau Kia and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Radzi, A. M. (2023) Processing techniques on plastic waste materials for construction and building applications. Current Opinion in Green and Sustainable Chemistry, 40 (NA). NA-NA. ISSN 2452-2236

Johar, Farah Ain and Mohamad, Shaza Eva and Koji, Iwamoto and Suzuki, Iwane and Yoshiaki, Maeda (2023) Effect of pre-treatment for lipid extraction from Tisochrysis lutea (T-iso). Chemical Engineering Transactions, 106 (NA). pp. 1177-1182. ISSN 2283-9216

Kamarudin, Mohd. Hider and Ismail, Zool Hilmi and Saidi, Noor Baity and Hanada, Kousuke (2023) An augmented attention-based lightweight CNN model for plant water stress detection. Applied Intelligence, 53 (18). pp. 20828-20843. ISSN 0924-669X

Kamaruzaman, Ahmad Fitry and Ahmad Tarmizi, Zatil Izzah (2023) Acceptance of the low carbon initiatives in the local government project implementation in Malaysia. Chemical Engineering Transactions, 106 (NA). pp. 1243-1248. ISSN 2283-9216

Kamaruzaman, Nursyuhada' and Abdul Manaf, Norhuda and Milani, Dia and Abbas, Ali (2023) Assessing the current state of biomass gasification technology in advancing circular economies: A holistic analysis from techno-economic-policy perspective in Malaysia and beyond. Chemical Engineering Research and Design, 199 (NA). pp. 593-619. ISSN 0263-8762

Kamaruzaman, Nursyuhada’ and Abdul Manaf, Norhuda (2023) Digitalization of biomass gasification plant in capturing and translating the technical and economic uncertainties – A review. Chemical Engineering Transactions, 106 (NA). pp. 1369-1374. ISSN 2283-9216

Kamis, Shahira Liza and Mat Tahir, Noor Ayuma and Yaakob, Yazid and Md. Ghazazi, Nur Afieqah (2023) Surface refinement of aluminium oxide by carbon-based reinforcement. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 28-40. ISSN 2289-7895

Kar, Fei Chan and Mohd. Zaid, Mohd. Hafiz and Mamat, Md. Shuhazlly and Tanemura, Masaki and Miyazaki, Hidetoshi and Kamis, Shahira Liza and Maruyama, Takahiro and Sako, Katsuya and Sharma, Kamal Prasad and Osman, Nurul Huda and Mazu, Nurul Najiha and Yaakob, Yazid (2023) Simultaneously improved surface hardness and thermal diffusivity of carbon nanotube/zinc silicate composites via colloidal processing. Materials Chemistry and Physics, 309 (NA). NA. ISSN 0254-0584

Kausar, Asma and Razzak, Imran and Shapiai, Mohammad Ibrahim and Beheshti, Amin (2023) 3D shallow deep neural network for fast and precise segmentation of left atrium. Multimedia Systems, 29 (3). pp. 1739-1749. ISSN 0942-4962

Khandakar, Amith and Chowdhury, Muhammad E. H. and Ibne Reaz, Mamun and Kiranyaz, Serkan and Hasan, Anwarul and Rahman, Tawsifur and Md. Ali, Sawal Hamid and Shapiai At. Abd. Razak,, Mohd. Ibrahim and A. Bakar, Ahmad Ashrif and Podder, Kanchon Kanti and Chowdhury, Moajjem Hossain and Faisal, Md. Ahasan Atick (2023) DSPnet: a self-onn model for robust DSPN diagnosis from temperature maps. IEEE Sensors Journal, 23 (5). pp. 5370-5381. ISSN 1530-437X

Khoo, Kuan Shiong and Ahmad, Imran and Chew, Kit Wayne and Iwamoto, Koji and Bhatnagar, Amit and Show, Pau Loke (2023) Enhanced microalgal lipid production for biofuel using different strategies including genetic modification of microalgae: a review. Progress in Energy and Combustion Science, 96 (NA). pp. 1-41. ISSN 0360-1285

Khorsand Zak, Ali and Hashim, Abdul Manaf and Hashim, Abd. Manaf (2023) X-ray peak broadening analysis and dielectric studies of BCT ceramics; comparison of sol–gel and solid solution methods. Journal of Materials Science: Materials in Electronics, 34 (16). NA-NA. ISSN 0957-4522

Koesoemadinata, Vidya Cundasari and Nakamura, Shunsuke and Kamal Baharin, Nur Syahirah and Yahya, Wira Jazair and Muhamad Yuzir, Muhamad Ali and Iwamoto, Koji and Suzuki, Kengo and Ida, Tamio and Md. Akhir, Fazrena Nadia and Othman, Nor’azizi and Hara, Hirofumi (2023) Potential of microalgae bio-coke as a sustainable solid fuel alternative to coal coke. Journal of Material Cycles and Waste Management, 25 (3). pp. 1699-1709. ISSN 1438-4957

Kong, Leangkim and Anuar, Aznah N. and M.Yuzir, Ali and C. Ros, Faizah and Said, Nur F. and Asanuma, Jun (2023) Impact of earthquake on river water quality parameters. Chemical Engineering Transactions, 106 (NA). pp. 1171-1176. ISSN 2283-9216

Krishnan, S. A. Gokula and Gumpu, Manju Bhargavi and Arthanareeswaran, G. and Goh, P. S. and Aziz, F. and Ismail, A. F. (2023) Electrochemical quantification of atrazine-fulvic acid and removal through bismuth tungstate photocatalytic hybrid membranes. Chemosphere, 31 (NA). NA-NA. ISSN 10045-6535

Lee, Yan Kang and Liew, Chia Pao and Kiew, Peck Loo and Foo, Braedan Chuan Yi and Yeoh, Wei Ming and Ho, Mui Yen (2023) Orange peel-derived activated carbon as a potential electrode material for supercapacitor application. Chemical Engineering Transactions, 106 (NA). pp. 1285-1290. ISSN 2283-9216

Lee, Yit Kwan and Yeap, Swee Pin and Sum, Jing Yao and Abu Bakar, yu Haslija and Tan, Lian See and Abbas Jawad, Zeinab (2023) Immobilization of NanoFe3O4 onto fabric material through in situ co-precipitation as a flexible catalyst for humic acid degradation. Chemical Engineering Transactions, 106 (NA). pp. 1009-1014. ISSN 2283-9216

Leong, Jing Heng and Liew, Peng Yen and Woon, Kok Sin and Fan, Yee Van (2023) Simulation study for optimising the operating conditions of anaerobic co-digestion for sewage sludge. Chemical Engineering Transactions, 106 (NA). pp. 1129-1134. ISSN 2283-9216

Lita Rahmasari, Lita Rahmasari and Abdullah, Mohd. Faizol and Md. Zain, Ahmad Rifqi and Hashim, Abdul Manaf (2023) Highly sensitive optofluidic sensor of 2D Si Phc L3 cavity for detection of glucose and bovine serum albumin. Silicon, 15 (6). pp. 2641-2651. ISSN 1876-990X

Loh, Zhi Wei and Mohd. Zaid, Mohd. Hafiz and Matori, Khamirul Amin and Awang Kechik, Mohd. Mustafa and Fen, Yap Wing and Mayzan, Mohd. Zul Hilmi and Shahira Liza, Shahira Liza and Cheong, Wei Mun (2023) Phase transformation and mechanical properties of new bioactive glass-ceramics derived from Cao–P2O5–Na2O–B2O3–Sio2 glass system. Journal of the Mechanical Behavior of Biomedical Materials, 143 (NA). pp. 1-11. ISSN 1751-6161

Lye, An Jie and Liew, Peng Yen and Mohd. Fadzil, Hidayah and Foong, Chan Choong (2023) Effect of emotional intelligence and demographic characteristics on psychological capital among chemical engineering students. Journal of Chemical Education, 100 (2). pp. 479-488. ISSN 0021-9584

Lye, An Jie and Mohd. Fadzil, Hidayah and Foong, Chan Choong and Liew, Peng Yen (2023) Modification and validation of a questionnaire for measuring the psychological capital of engineering students. Chemical Engineering Transactions, 106 (NA). pp. 997-1002. ISSN 2283-9216

M. Aris, Alijah and Yuzir, Ali M. and Anuar, Aznah N. and Hara, Hirofumi (2023) Identification of facultative anaerobic bacteria for low-cost nutrient removal in treating domestic wastewater. Chemical Engineering Transactions, 106 (NA). pp. 1201-1206. ISSN 2283-9216

M. Dewika, M. Dewika and Markandan, Kalaimani and Ahmad Irfan, N. and Mohd. Abdah, Muhammad Amirul Aizat and Jamian, Nor Ruwaida and Y. Y., Sara and Mohammad Khalid, Mohammad Khalid (2023) Review of microplastics in the indoor environment: Distribution, human exposure and potential health impacts. Chemosphere, 324 (NA). NA-NA. ISSN 0045-6535

M. Kassim, Norazah and Anuar, Aznah N. and Sharani, Noor A. and M. Aris, Alijah and Khor, Bee C. (2023) Aerobic sludge granulation process in a 4-h sequencing batch reactor for treating low strength wastewater. Chemical Engineering Transactions, 106 (NA). pp. 1153-1158. ISSN 2283-9216

M. Rasid, Nur I. and Md. Akhir, Fazrena Nadia and Abd. Aziz, Azila and Iwane, Suzuki and Shinya, Takahashi (2023) Bioactive compound potential of brassicaceae sprouts and the effect of UV-B radiation on their antioxidant activity. Chemical Engineering Transactions, 106 (NA). pp. 1261-1266. ISSN 2283-9216

M'hamed Beriache, M'hamed Beriache and Cherki, Brahim Hicham and Mokhtar Saidia, Leila and Che Sidik, Nor Azwadi and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207

Madkour, Dina M. and Shapiai, Mohd. Ibrahim and Mohamad, Shaza Eva and Aly, Hesham Hamdy and Ismail, Zool Hilmi and Ibrahim, Mohd. Zamri (2023) A systematic review of deep learning microalgae classification and detection. IEEE Access, 11 . pp. 57529-57555. ISSN 2169-3536

Mamat, Normaisharah and Othman, Mohd. Fauzi and Abdulghafor, Rawad and Alwan, Ali A. and Gulzar, Yonis (2023) Enhancing image annotation technique of fruit classification using a deep learning approach. Sustainability (Switzerland), 15 (2). pp. 1-19. ISSN 2071-1050

Mansor, Muhammad Syahir and Aminur Rashid, Amirul and Alzahari, Ahmad Nabil and Abdul Manaf, Norhuda (2023) Synthesis and characterisation of lauric acid phase change material with graphite/carbon nanotubes for thermal energy storage application. Chemical Engineering Transactions, 106 (NA). pp. 1165-1170. ISSN 2283-9216

Mansor, Muliani and Budiman, Siti Noorleila and Mohd. Paad, Khairunnisa and Surib, Nur Atiqah and Mohd. Zainoodin, Azran (2023) Physicochemical characterization of candle soot functionalized with nitric acid. Chemical Engineering Transactions, 106 (NA). pp. 1135-1140. ISSN 2283-9216

Maresova, Petra and Krejcar, Ondrej and Maskuriy, Raihan and Abu Bakar, Nor Azlina and Selamat, Ali and Truhlarova, Zuzana and Horak, Jiri and Joukl, Miroslav and Vítkova, Lucie (2023) Challenges and opportunity in mobility among older adults - key determinant identification. BMC Geriatrics, 23 (1). pp. 1-29. ISSN 1471-2318

Marzuki, Ainaa Amirah and Nordin, Nur Azmah and Mazlan, Saiful Amri and Johari, Mohd. Aidy Faizal and Mohamed Khaidir, Rahayu Emilia and Michal Sedlacik, Michal Sedlacik and Ubaidillah, Ubaidillah (2023) Enhancement of the rheological properties of magnetorheological foam via different constraint volumes foaming approach. Polymer Testing, 128 (NA). pp. 1-10. ISSN 0142-9418

Masturina Nazurah, Masturina Nazurah and Shaffiei, Zatul Amilah and Daud, Nor Aziah and Ahmad, Nor Diana and Shaffiei, Zatul Alwani (2023) Healthyheart data visualization: predicting heart condition using machine learning. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 41-57. ISSN 2289-7895

Mat Tahir, Noor Ayuma and Kamis, Shahira Liza and Fukuda, Kanao and Akasaka, Hiroki (2023) Reducing friction of diamond-like carbon film in sliding through fluorine doping. Tribology Online, 18 (6). pp. 396-405. ISSN 1881-218X

Md. Ghazazi, Nur Afieqah and Kamis, Shahira Liza and Ishimatsu, Jun and Mat Tahir, Noor Ayuma and Zulkifli, Nur Aszreen and Yaakob, Yazid (2023) Effect of pulse current on surface properties of aluminum oxide coating containing graphite. Surface and Interface Analysis, 55 (11). pp. 831-844. ISSN 0142-2421

Md. Mansor, Mohamad Naqiuddin and Tasnim, Rahayu and Alias, Roslinda and Mohd. Norman, Abdullah Muaz and Dasiman, Razif (2023) Disabled but determined: challenges faced by entrepreneurs in Selangor, Malaysia during the COVID-19 pandemic. Malaysian Journal of Public Health Medicine, 23 (1). pp. 65-71. ISSN 1675-0306

Meraj, Aatikah and Jawaid, M. and Singh, Surendra Pratap and Nasef, Mohamed Mahmoud and Ariffin, Hidayah and Haafiz, M.K. Mohamad (2023) Effect of natural deep eutectic solvents on properties of micro crystalline cellulose isolated from kenaf fibre. Industrial Crops and Products, 203 (117129). ISSN 0926-6690

Meraj, Aatikah and Singh, Surendra Pratap and Jawaid, M. and Nasef, Mohamed Mahmoud and Alomar, Taghrid S. and AlMasoud, Najla (2023) A review on eco-friendly isolation of lignin by natural deep eutectic solvents from agricultural wastes. Journal of Polymers and the Environment, 31 (8). pp. 3283-3316. ISSN 1566-2543

Mohamad, Noor Ashikin and Nasef, Mohamed Mahmoud and Tuan Abdullah, Tuan Amran and Ahmad, Arshad and Ting, Teo Ming (2023) CO2 adsorption and CO2/CH4 separation using fibrous amine-containing adsorbents: isothermal, kinetic, and thermodynamic behaviours. Environmental Science and Pollution Research, 30 (55). pp. 116906-116920. ISSN 0944-1344

Mohamad Rashid, Nur Nadhirah and Ahmad, Harith and Ismail, Mohammad Faizal and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Yahaya, Hafizal and Nordin, Nur Azmah and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2023) Nanotubes in chitin mode locker for passive mode-locked fibre laser in 2.0 µm region. Photonics, 10 (3). pp. 1-14. ISSN 2304-6732

Mohamad Rashid, Nur Nadhirah and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Nordin, Nur Azmah and Yahaya, Hafizal and Ismail, Mohammad Faizal and Ahmad, Harith and Wan Nawawi, Wan Mohd Fazli and Ahmad, Fauzan (2023) Passively Q-switched erbium-doped fibre laser based on graphene-chitin saturable absorber. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 44-52. ISSN 2462-1943

Mohamed Mansor, Mohamed Arsyad and Mad Nordin, Mariam Firdhaus and Mohd. Kassim, Angzzas Sari (2023) Extraction of Zingiberaceae family Rhizomes (C. longa, C. xanthorrhiza and Z. officinale) using subcritical water extraction and its characterization study. Progress in Engineering Application and Technology (PEAT), 4 (1). pp. 26-38. ISSN 2773-5303

Mohamed Noor, Noraini and Abdullah, Ezzat Chan and Othman, Raihan and Nasibab, Mubarak Mujawar (2023) Removal of cadmium ions via the magnetic biochar synthesised from sugarcane bagasse: Factors affecting yield and adsorption capability. Journal of Sustainability Science and Management, 18 (1). pp. 70-85. ISSN 1823-8556

Mohamed Shoani, Mohamed Shoani and Ribuan, Mohamed Najib and Mohd. Faudzi, Ahmad Athif and Mohamaddan, Shahrol (2023) Reducing actuators in soft continuum robots and manipulators. Applied Sciences (Switzerland), 13 (1). pp. 1-13. ISSN 2076-3417

Mohammad Arafat, Mohammad Arafat and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd. Fuad (2023) Effect of Reynolds number on the wake of a next-generation high-speed train using CFD analysis. CFD Letters, 15 (1). pp. 76-87. ISSN 2180-1363

Mohammadi, Hossein and Ahmad, Zaini and Petru, Michal and Mazlan, Saiful Amri and Faizal Johari, Mohd. Aidy and Hatami, Hossein and Rahimian Koloor, Seyed Saeid (2023) An insight from nature: honeycomb pattern in advanced structural design for impact energy absorption. Journal of Materials Research and Technology, 22 (NA). pp. 2862-2887. ISSN 2238-7854

Mohammed, Abdulrahman A.B.A. and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and Elfaghi, Abdulhafid M. and Ali, Yasir Hassan and Akeel, Norie A. A. and Ilya, R. A. and Sapua, S. M. (2023) Effect of sugar palm fibers on the properties of blended wheat starch/polyvinyl alcohol (PVA) -based biocomposite films. Journal of Materials Research and Technology, 24 (NA). pp. 1043-1055. ISSN 2238-7854

Mohanadas, Hemanth Ponnambalath and Nair, Vivek and Abbas, Akbar and Mohd. Faudzi, Ahmad Athif and Tucker, Nick and Ismail, Ahmad Fauzi and Ramakrishna, Seeram and Saidin, Syafiqah and Jaganathan, Saravana Kumar (2023) A systematic analysis of additive manufacturing techniques in the bioengineering of in vitro cardiovascular models. Annals of Biomedical Engineering, 51 (11). pp. 2365-2383. ISSN 0090-6964

Mohd. Halim, Siti Nabilah and Mohamad Taib, Mohamad Fariz and Zuikafly, Siti Nur Fatin and Sapingi, Husni Hani Jameela and Mat Ali, Mohamed Sukri and Yahaya, Hafizal and Ahmad, Fauzan (2023) Ab-Initio and experimental study of the electronic and optical properties of layered 2D molybdenum disulphide. Journal of Advanced Research in Applied Mechanics, 107 (1). pp. 11-19. ISSN 2289-7895

Mohd. Hami, Siddratul Sarah and Nor Affandi, Nor Dalila and Mohd., Ahmad Faiza and Harun, Ahmad Mukifza and Abdul Rahman, Mohd. Azizi and Indrie, Liliana and Ahmad, Mohd. Rozi (2023) The effects of different concentrations of nanoclay in polyvinyl alcohol (PVA) nanofibres-polyester bilayer on morphological structure, mechanical properties, and filtration of direct red dye. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 359-367. ISSN 2462-1943

Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Ardila Rey, Jorge Alfredo and Ishak, Izuan Amin (2023) The influence of different downstream plate length towards the flow-induced vibration on a square cylinder. Scientific Reports, 13 (1). pp. 1-35. ISSN 2045-2322

Mohd. Mokhtar, Mohamad Aizad and Rasit Ali, Roshafima and Lei, Zhongfang and Che Jusoh, Nurfatehah Wahyuny and Ahmad Tarmizi, Zatil Izzah (2023) Efficiency of low-Ag-content biosynthesized ZnO/Ag on photodegradation of paracetamol. Chemical Engineering Transactions, 106 (NA). pp. 1051-1056. ISSN 2283-9216

Mohd. Noor Shah, Nurul Fathihin and Azmi, Riswadi and Ghazali, Masitah and Othman, Nur Zuraifah Syazrah (2023) Users experience perspective in exploring an ancient manuscript using augmented reality application. International Journal of Innovative Computing, Information and Control, 19 (6). pp. 1679-1695. ISSN 1349-4198

Mohd. Rawian, Nur Adilah and Akasaka, Hiroki and Khamis, Shahira Liza and Fukuda, Kanao and Zulkifli, Nur Aszreen and Mat Tahir, Noor Ayuma and Yaakob, Yazid (2023) Surface and tribological characterization of anodic aluminum oxide coating containing diamond-like carbon flakes. Diamond and Related Materials, 132 (NA). NA-NA. ISSN 0925-9635

Mohd. Razali, Nazirah and Yahaya, Hafizal and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan (2023) Simulation of trenched coreless silica fiber sensor for refractive index measurement. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 87-94. ISSN 2462-1943

Mohd. Razali, Nazirah and Yahaya, Hafizal and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan (2023) Simulation of trenched coreless silica fiber sensor for refractive index measurement. Journal of Advanced Research in Applied Sciences and Engineering Technology,, 32 (1). pp. 87-94. ISSN 2462-1943

Mohd. Shadzalli, Z. F. and Kamaruzaman, N. and Abdul Manaf, N. (2023) Flexible feedstock analysis of biomass gasification process for carbon-negative energy technology via aspen plus simulation. ASM Science Journal, 18 (NA). pp. 1-6. ISSN 1823-6782

Mohd. Sobran, Nur Maisarah and Ismail, Zool Hilmi (2023) A systematic literature review of unsupervised fault detection approach for complex engineering system. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 43-60. ISSN 2289-7895

Mohd. Tamam, Mohamad Qayyum and Tasvir Omi, Md. Reashed and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Abdul Rahman, Hasbullah and Rahman, Md. Mujibur and Abd. Kadir, Hasannuddin and Noge, Hirofumi and Koga, Tsuyoshi and Hong, Chungpyo and Otaka, Takeshi and Kinoshita, Eiji (2023) Engine performance and emissions evaluation of surfactant-free B30 biodiesel-diesel/water emulsion as alternative fuel. Scientific Reports, 13 (1). pp. 1-14. ISSN 2045-2322

Mohd. Tamam, Mohamad Qayyum and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Abdullah, Nik Rosli and Abdul Kadir, Hasannuddin and Rahman, Md. Mujibur and Abdul Rahman, Hasbullah and Abu Mansor, Mohd. Radzi and Noge, Hirofumi (2023) Performance and emission studies of a common rail turbocharged diesel electric generator fueled with emulsifier free water/diesel emulsion. Energy, 268 (NA). NA-NA. ISSN 0360-5442

Mohd. Yusuf, Shahir and Mazlan, Nurainaa and Musa, Nur Hidayah and Zhao, Xiao and Chen, Ying and Yang, Shoufeng and Nordin, Nur Azmah and Mazlan, Saiful Amri and Gao, Nong (2023) Microstructures and hardening mechanisms of a 316L stainless steel/Inconel 718 interface additively manufactured by multi-material selective laser melting. Metals, 13 (2). pp. 1-21. ISSN 2075-4701

Moradi, Hamidreza and Sabbaghi, Samad and Mirbagheri, Naghmeh Sadat and Chen, Pu and Rasouli, Kamal and Kamyab, Hesam and Chelliapan, Shreeshivadasan (2023) Removal of chloride ion from drinking water using Ag NPs-Modified bentonite: Characterization and optimization of effective parameters by response surface methodology-central composite design. Environmental Research, 223 (NA). NA-NA. ISSN 0013-9351

Muhammad Nasir, Mohd. Nizar and Mohd. Nordin, Ili Najaa Aimi and Mohd. Faudzi, Ahmad Athif and Muftah, Mohamed Naji and Mhd. Yusoff, Mohd. Akmal and Mohamaddan, Shahrol (2023) Modeling and position control of fiber braided bending actuator using embedded system. Applied Sciences (Switzerland), 13 (5). pp. 1-15. ISSN 2076-3417

Muhsin, M. and Kamardin, Kamilia and Yamada, Yoshihide (2023) Focal region ray tracing of conventional and shaped lens antenna. International Journal of Integrated Engineering, 15 (3). pp. 131-139. ISSN 2229-838X

Murshida, Ghulam and Al-Khayaria, Shaima and Tan, Lian See (2023) Measurement of carbon dioxide (CO2) absorptive capacity in a secondary amine based aqueous mixture: Experimental and modelling study. Chemical Engineering Transactions, 106 (NA). pp. 979-984. ISSN 2283-9216

Musa, Zulkifli and Ibrahim, Zuwairie and Shapiai, Mohd. Ibrahim and Tsuboi, Yusei (2023) Cubature kalman optimizer: A novel metaheuristic algorithm for solving numerical optimization problems. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 333-355. ISSN 2462-1943

Musthafa, Kawther M. and Hamzah, Azura and Ooi, Wei Ling and Rosol, Ahmad Haziq Aiman and Mohamed, Norliza and Mohamed Mafroos, Mahroof and Harun, Sulaiman (2023) Synthesisation, fabrication, and incorporation techniques of max phase and mxenesaturable absorber in passively q-switched and mode-locked all-fibre laser cavities: A review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 119-141. ISSN 2462-1943

Musthafa, Kawther M. and Musthafa, Azura and Musthafa, xOoi Wei and Rosol, Ahmad Haziq Aiman and Mohamed, Norliza and Mafroos, Mahroof Mohamed and Harun, Sulaiman (2023) Synthesisation, fabrication, and incorporation techniques of max phase and mxene saturable absorber in passively q-switched and mode-locked all-fibre laser cavities: a review. Journal of Advanced Research in Applied Sciences and Engineering TechnologyOpen AccessVolume 32, Issue 2, Pages 119 - 141October 2023, 32 (2). pp. 119-141. ISSN 2462-1943

Nagahashi, Yusumi and Takeuchi, Hideki and Grace, John R. and Asako, Yutaka (2023) Circulation and separation of binary solids in connected fluidized beds. Powder Technology, 428 (NA). NA. ISSN 0032-5910

Ngui, Wai Keng and Leong, Mohd. Salman and Shapiai, Mohd. Ibrahim and Lim, Meng Hee (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680

Nguyen, Hoang Ly and Nguyen, Binh Nguyen and Huynh, Nhu Tran and Thi Thuy, Hang Hoang and Joo, Sang-Woo and Vasseghian, Yasser and Kamyab, Hesam and Chelliapan, Shreeshivadasan and Jirí, Jaromír Klemeš (2023) Metal-organic framework nanopesticide carrier for accurate pesticide delivery and decrement of groundwater pollution. Journal of Cleaner Production, 402 (136809). NA-NA. ISSN 0959-6526

Ni Njoman Juliasih, Ni Njoman Juliasih and Inge Dhamanti, Inge Dhamanti and I. Nyoman Semita, I. Nyoman Semita and Minarni Wartiningsih, Minarni Wartiningsih and Mahmudah, Mahmudah and Yakub, Fitri (2023) Patient safety culture, infection prevention, and patient safety in the operating room: health workers' perspective. Risk Management and Healthcare Policy, 16 (NA). pp. 1731-1738. ISSN 1179-1594

Nik Him, Nik Ahmad Shaiffudin and Nik Mohamad, Nik Arif and Jusoh, Azizul Fadzli and Abu, Aminudin and Sham, Radhir (2023) The role of technology advancement in improving the current practice of ambulance decontamination in Malaysia: a scoping review. Malaysian Journal of Applied Sciences (MyJAS), 8 (1). pp. 59-64. ISSN 0127-9246

Noor Akashah, Muhammad Haziq and Mohammad Rozali, Nor Erniza and Mahadzir, Shuhaimi and Liew, Peng Yen (2023) Utilization of cold energy from LNG regasification process: a review of current trends. Processes, 11 (2). pp. 1-22. ISSN 2227-9717

Nugroho, Rizki Susetyo and Bahiuddin, Irfan and Prabakara, Hafizh Arsa and Chazim, Ryandhi Rofifu and Leman, Zulkarnain Ali and Mohammed Ariff, Mohd. Hatta (2023) A dynamic modelling of forklift hydraulic actuator internal leakage using bond graph method. International Journal of Heavy Vehicle Systems, 30 (3). pp. 380-399. ISSN 1744-232X

Nurul Izzati, Nurul Izzati and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Rijal, Hom Bahadur and Ardila Rey, Jorge Alfredo and Hagishima, Aya and Nurizzatul Atikha, Nurizzatul Atikha (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students' activity rooms in a university building in Malaysia. Buildings, 13 (1). pp. 1-25. ISSN 2075-5309

Omar, Nurizan and Abdullah, Ezzat Chan and Aaron Petrus, Ashley and Mubarak, Nabisab Mujawar and Mohammad Khalid, Mohammad Khalid and Agudosi, Elochukwu Stephen and Numan, Arshid and Aid, Siti Rahmah (2023) Single-route synthesis of binary metal oxide loaded coconut shell and watermelon rind biochar: Characterizations and cyclic voltammetry analysis. Biomass Conversion and Biorefinery, 13 (3). pp. 2279-2291. ISSN 2190-6815

Othman, Intan Sharhida and Munawar, Rose Farahiyan and Jun, Liew Pay and Abd. Razak, Jeefferie and Suandi, Syahrul Azwan Sundi and Mohamad Zin, Mohd. Rody and Kamis, Shahira Liza and Ahsan, Qumrul (2023) Wear scar characteristics of thermal power plant waste reinforced nickel matrix composite coatings. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 21-31. ISSN 2289-7895

Patel, Dipal and Upadhyay, Ramesh V. and Mazlan, Saiful Amri (2023) Particle-reinforced elastomer model to analyse viscoelastic properties of flake-shaped electrolyte iron particle-based magnetorheological elastomer. Smart Materials and Structures, 32 (9). NA. ISSN 0964-1726

Phuang, Zhen Xin and Woon, Kok Sin and Mong, Guo Ren and Mohd. Hanafiah, Marlia and Liew, Peng Yen (2023) Assessing plastic waste green economy management via integrated life cycle environmental and costing framework. Chemical Engineering Transactions, 106 (NA). pp. 109-114. ISSN 2283-9216

Purba, Laila Dina Amalia and Zahra, Sasmitha Aulia and Yuzir, Ali and Iwamoto, Koji and Abdullah, Norhayati and Shimizu, Kazuya and Lei, Zhongfang and Hermana, Joni (2023) Algal-bacterial aerobic granular sludge for real municipal wastewater treatment: Performance, microbial community change and feasibility of lipid recovery. Journal of Environmental Management, 333 (117374). NA-NA. ISSN 03014797

Raja Azam Shah, Raja Nur Atikah and Mohd. Redzuan, Farah Liana and Zaki, Sheikh Ahmad and Mohammad, Ahmad Faiz and Mohammad, xFitri (2023) A review on thermoelectric generators: structural optimization and economic analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 99-114. ISSN 2289-7879

Rakhmania, Rakhmania and Kamyab, Hesam and Yuzir, Muhammad Ali and Al-Qaim, Fouad Fadhil and Purba, Laila Dina Amalia and Riyadi, Fatimah Azizah (2023) Application of Box-Behnken design to mineralization and color removal of palm oil mill effluent by electrocoagulation process. Environmental Science and Pollution Research, 30 (28). pp. 71741-71753. ISSN 0944-1344

Ramli, Nor Fazira and Haron, Nuzul Azam and Ales@Alias, Aidi Hizami and Harun, Aizul Nahar (2023) The implementation of Integrated Management Systems (IMS) in construction organizations in Malaysia. Malaysian Journal of Civil Engineering (MJCE), 35 (3). pp. 1-9. ISSN 2600-9498

Rezny, Lukas and Fadeyi, Oluwaseun and Bauer, Petr and Maresova, Petra and Selamat, Ali and Awosanya, Temitope and Krejcar, Ondrej (2023) Software solution of the model for evaluating the potential of new ICT solutions of intelligent environments for elderly. Health and Technology, 13 (3). pp. 379-390. ISSN 2190-7188

Roslan, Shairatul Akma and Yakub, Fitri and Rambat, Shuib and Munawwarah, Sharifah and Saidin, Mokhtar and Liana, Farah and Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Mohammad, Ahmad Faiz (2023) The novel method in validating the spectral wavelength optimization to determine archaeological proxies by the integration of aerial and ground platforms. Journal of Advanced Research in Applied Mechanics, 108 (1). pp. 1-15. ISSN 2289-7895

Roslan, Siti Amni Husna and Rasid, Zainudin A. and Ariffin, Ahmad Kamal (2023) Extended blade element momentum theory for the design of small-scale wind turbines. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 62-75. ISSN 2289-7895

S. M. A., Tarmizi and N. A., Nordin and S. A., Mazlan and U., Ubaidillah and S. A. A., Aziz and N., Mohamad and N. M., Hapipi (2023) Improvement of rheological and transient response of magnetorheological grease with amalgamation of cobalt ferrite. Journal of Materials Research and Technology, 23 (NA). pp. 1285-1295. ISSN 2238-7854

Sahat, Nur Shakira and Mohd. Jusoh, Yanti Maslina and Hashim, Zanariah and Muhamad, Ida Idayu and Dailin, Daniel Joe and Zainol, Noorazwani and Aman Nor, Farahiyah and Mohd. Kassim, Angzzas Sari and Abang Zaidel, Dayang Norulfairuz (2023) Physicochemical properties and crystallisation behaviour of fat blends for a margarine formulation. Chemical Engineering Transactions, 106 (NA). pp. 1039-1044. ISSN 2283-9216

Saidin, Hamidi and Abd. Razak, Azli and Mohamad, Mohd. Faizal and Ul-Saufie, Ahmad Zia and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Othman, Nor’azizi (2023) Hazard evaluation of indoor air quality in bank offices. Buildings, 13 (3). pp. 1-18. ISSN 2075-5309

Saidin, I. A. and Maslan, M. N. and Abdullah, L. and Yakub, F. (2023) Evaluation and comparison of the tracking performance between npid icond controller, npid controller, and pid controller. Journal of Engineering Science and Technology, 18 (1). pp. 624-635. ISSN 1823-4690

Saito, Aya and Yokoi, Daigo and Tsuji, Tomoya and Kiew, Peck Loo and Okada, Masaki and Hoshina, Taka-aki (2023) Solid-liquid equilibria for ethanol – water – antipyrine and ethanol – water - 4-aminoantipyrine, and their cosolvencies in ethanol – water mixture. Fluid Phase Equilibria, 570 (NA). NA-NA. ISSN 0378-3812

Salameh, Anas A. and Abu-AlSondos, Ibrahim A. and Abu, Noor Hidayah and Harun, Aizul Nahar (2023) Current knowledge and future possibilities of medical digital technologies based on mobile health. International Journal of Interactive Mobile Technologies, 17 (17). pp. 134-147. ISSN 1865-7923

Sarmin, Siti Noorbaini and Jawaid, Mohammad and Zaki, Sheikh Ahmad and Mohd. Radzi, Ali and Fouad, Hassan and Khiari, Ramzi and Rahayu, Sri and Mohamad Amini, Mohd. Hazim (2023) Enhancing the properties of date palm fibre reinforced bio-epoxy composites with chitosan - Synthesis, mechanical properties, and dimensional stability. Journal of King Saud University - Science, 35 (7). pp. 1-8. ISSN 1018-3647

Sasmitha Aulia Zahra, Sasmitha Aulia Zahra and Purba, Laila Dina Amalia and Abdullah, Norhayati and Yuzir, Ali and Koji, Iwamoto and Lei, Zhongfang and Joni Hermana, Joni Hermana (2023) Characteristics of algal-bacterial aerobic granular sludge treating real wastewater: effects of algal inoculation and alginate-like exopolymers recovery. Chemosphere, 329 (NA). NA-NA. ISSN 0045-6535

Selamat, Hazlina and Haniff, Mohamad Fadzli and Abu, Aminudin and Abu, Mohd. Azlan and Mohamad, Radhir Sham and Azizuddin, Muhammad Nur Azam (2023) Development of web-based IoT comfort index and electricity consumption estimation monitoring microcontroller system with wireless sensor modules for air-conditioning system. Journal of Advanced Research in Applied Mechanics, 104 (1). pp. 12-24. ISSN 2289-7895

Selamat, Hazlina and Islam, Tahmida and Haniff, Mohamad Fadzli and Alimin, Ahmad Jais (2023) Design and implementation of hybrid exoskeleton for oil palm harvester to reduce muscle strain. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 1-11. ISSN 2289-7895

Senthilkumar, K. and Chandrasekar, M. and Mohammad Jawaid, Mohammad Jawaid and Mahmoud, Mohamed H. and Fouad, Hassan and Santulli, Carlo and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki (2023) Investigating the synergistic effect of olive trunk leaves powder and pineapple leaf fibers on the physical, tensile, and thermal properties of epoxy-based composites. Polymer Composites, 44 (6). pp. 3416-3424. ISSN 0272-8397

Shaffiei, Zatul Alwani and Amir Hamzah, Amir Syafiq Syamin Syah and Rashid, Shaikh Mariyam Harunor and Oshima, Naoki (2023) Role of text mining in extracting valuable information from text data. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 263-271. ISSN 2462-1943

Shaffiei, Zatul Alwani and Syah Amir Hamzah, Amir Syafiq Syamin and Harunor Rashid, Shaikh Mariyam and Oshima, Naoki (2023) Role of text mining in extracting valuable information from text data. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 263-271. ISSN 2462-1943

Shafie, N. F. A. and Hamzah, M. Y. and Ali, R. R. (2023) Tuneable poly(N-Isopropyl acrylamide)-based thermo-responsive nanogels: a review on polymerisation method. International Journal of Nanotechnology, 11 (12). pp. 917-935. ISSN 1475-7435

Shaharuddin, Shanahs and Abdollah, Mohd. Fadzli and Amiruddin, Hilmi and Kamis, Shahira Liza and Ramli, Faiz Redza (2023) Applied normal load and printing layer thickness relationship on the tribological properties of novel 3D-printed PLA-PCU polymer blend. Jurnal Tribologi, 39 (NA). pp. 1-16. ISSN 2289-7232

Shahdan, Nadhilah Aqilah and Balasundram, Vekes and Ibrahim, Norazana and Isha, Ruzinah (2023) Thermogravimetric and kinetic studies on pyrolysis of empty fruit bunch over metal-impregnated rice husk ash catalysts. Biomass Conversion and Biorefinery, 13 (18). pp. 16441-16451. ISSN 2190-6815

Shamsudin, Nur Hazahsha and Shafie, S. and Ab. Kadir, Mohd. Zainal Abidin and Ahmad, Fauzan and Sulaiman, Yusran and Mohd. Chachuli, Siti Amaniah and Che Razali, Mashitah (2023) Flexible back-illuminated dye sensitised solar cells (DSSCs) with titanium dioxide/silver nanoparticles composite photoanode for improvement of power conversion efficiency. Optik, 272 (NA). NA. ISSN 0030-4026

Siaw, Wen Chun and Tan, Lian See and Kiew, Peck Loo and Tsuji, Tomoya and Murshid, Ghulam (2023) Synthesis of biodiesel from palm oil using a hybrid mechanical stirring and high frequency ultrasonic-assisted enzyme-catalysed process. Chemical Engineering Transactions, 106 (NA). pp. 1057-1062. ISSN 2283-9216

Sithambaranathan, Paveswari and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Abbasi, Amin and Ting, T. M. (2023) Composite proton-conducting membrane with enhanced phosphoric acid doping of basic films radiochemically grafted with binary vinyl heterocyclic monomer mixtures. Membranes, 13 (1). pp. 1-20. ISSN 2077-0375

Sofian, Alwathan and Mohd. Setapar, Siti Hamidah and Irwan, Muh. and Thahir, Ramli and Irawan, Dedi (2023) The elements characterization of conversion low-rank coal through carbonization step to activated carbon. Chemical Engineering Transactions, 106 (NA). pp. 1255-1260. ISSN 2283-9216

Surib, Nur Atiqah and M. P., Khairunnisa and I. Wuled Lenggoro, I. Wuled Lenggoro and Kamis, Shahira Liza and Wong, Yew Hoong (2023) Conductive particulate films fabricated by electrospray deposition of candle soot suspensions with acid treatment. Advanced Powder Technology, 34 (9). NA-NA. ISSN 0921-8831

Syaifuddiin, Gus Nanang and Arifin, Rizal and Desriyanti, Desriyanti and Buntoro, Ghulam Asrofi and Rosyidin, Zulkham Umar and Pratama, Ridwan Yudha and Selamat, Ali (2023) Hoax identification of Indonesian tweeters using ensemble classifier. Journal of Information Systems and Telecommunication, 11 (42). pp. 94-101. ISSN 2322-1437

T. Thirugnana, Sathiabama and Jaafar, Abu Bakar and Rajoo, Srithar and Azmi, Ahmad Aiman and Karthikeyan, Hariharan Jai and Yasunaga, Takeshi and Nakaoka, Tsutomu and Kamyab, Hesam and Chelliapan, Shreeshivadasan and Ikegami, Yasuyuki (2023) Performance analysis of a 10 MW ocean thermal energy conversion plant using Rankine cycle in Malaysia. Sustainability (Switzerland), 15 (4). pp. 1-18. ISSN 2071-1050

Tan, Chen Tung and Khairuddin, Uswah and Shapiai, Mohd. Ibrahim and Md. Nor, Norhariani and Wen, Mark Han Hiew and Mohd. Suhaimie, Nurul Aisyah (2023) Calf posture recognition using convolutional neural network. Computers, Materials and Continua, 74 (1). pp. 1493-1508. ISSN 1546-2218

Tan, Kai Wen and Liew, Peng Yen and Gan, Cheng Ling and Woon, Kok Sin and Mohammad Rozali, Nor Erniza and Ho, Wai Shin (2023) Peer-to-peer trading for multi-utility energy systems in Eco- industrial park. Chemical Engineering Transactions, 103 (NA). pp. 823-828. ISSN 2283-9216

Tanavarotai, Karn and Nor Anuar, Aznah and Yuzir, Ali and Ab. Halim, Mohd. Hakim and Mohd. Aris, Alijah and Khor, Bee Chin and Lei, Zhongfang and Yuniarto, Adhi (2023) The storage of dried aerobic granular sludges under ambient condition. Journal of Cleaner Production, 383 (135401). NA-NA. ISSN 0959-6526

Tasin, Muhammad Asyraf and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Johari, Mohd. Aidy Faizal and Nordin, Nur Azmah and Mohd. Yusuf, Shahir Yasin and Choi, Seung Bok and Irfan Bahiuddin, Irfan Bahiuddin (2023) Magnetostriction enhancement in midrange modulus magnetorheological elastomers for sensor applications. Micromachines, 14 (4). pp. 1-15. ISSN 2072-666X

Tsuji, Tomoya and Kiew, Peck Loo and Matsukawa, Hiroaki and Hoshina, Taka Aki and Otake, Katsuto (2023) Measurements and correlation of saturated vapor pressure of a new sulfur-free odorant for liquefied petroleum gas, 2-Hexyne, and bubble point pressure for three binaries, Ehtane-2-Hexyne, Propane-2-Hexyne, and Butane-2-Hexyne. Journal of the Japan Petroleum Institute, 66 (3). pp. 69-80. ISSN 1346-8804

Vinothini, R. and Niranjana, G. and Yakub, Fitri (2023) A novel classification model using optimal long short-term memory for classification of COVID-19 from CT images. Journal of Digital Imaging, 36 (6). pp. 2480-2493. ISSN 0897-1889

Wan Aina Syahirah, Wan Abdullah and Mardhiah, Wahab and Zeyu, Yang and Itoi, Kazane and Torimaru, Sumire and Abdul Manaf, Norhuda (2023) A reality check on the large scale of solar energy technology via integrated SWOT-PESTLE-AHP analysis. Chemical Engineering Transactions, 106 (NA). pp. 511-516. ISSN 2283-9216

Wan Mahdi, Wan Nur Izzati and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Abdul Rashid, Muhammad Adib and Abd. Kadir, Hasannuddin and Dhani Avianto Sugeng, Dhani Avianto Sugeng and Eiji, Kinoshita (2023) The effect of different in-line mixers producing emulsifier-free bio-diesel emulsion on the diesel engine combustion performance and exhaust emission. Fuel, 337 (NA). NA-NA. ISSN 0016-2361

Wu, Xuemei and He, Jie and Huang, Qionghao and Huang, Changqin and Zhu, Jia and Huang, Xiaodi and Fujita, Hamido (2023) FER-CHC: Facial expression recognition with cross-hierarchy contrast. Applied Soft Computing, 145 (NA). NA-NA. ISSN 1568-4946

Xin Lai, Andrea Jia and Tsuji, Tomoya and Tochigi, Katsumi and Tan, Lian See and Matsuda, Hiroyuki and Kurihara, Kiyofumi (2023) Prediction of phase equilibria and transport properties using ASOG and PRASOG group contribution methods: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 66-80. ISSN 2289-7879

Yamada, Junya and Tsuji, Tomoya and Shibuya, Takehiro and Kobayashi, Atsushi and Suzuki, Iwane (2023) Mercury solubility and its modeling in an artificial natural gas at high pressures. Fluid Phase Equilibria, 568 (NA). NA-NA. ISSN 0378-3812

Yee, Lai Kok and Mohd. Yusoff, Muhammad Syahmi and Ken, Tan Lit and Asako, Yutaka and Quen, Lee Kee and Kang, Hooi-Siang and Siang, Gan Yee and Chuan, Zun-Liang and Tey, Wah Yen and Zahari, Abdul Muhaimin and Hoo, Kok Chee (2023) Velocity analysis on moving objects detection using multi-scale histogram of oriented gradient. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 35-43. ISSN 2289-7895

Yusnita Rahayu, Yusnita Rahayu and Yoga Bayu Pradana, Yoga Bayu Pradana and Yamada, Yoshihide (2023) Dual-band frequency reconfigurable 5G microstrip antenna. Sinergi (Indonesia), 27 (1). pp. 81-88. ISSN 1410-2331

Yusuf, Yusnita and Shafie, Suhaidi and Ismail, Ismayadi and Ahmad, Fauzan and Hamidon, Mohd. Nizar and Sudhir, Pandey Shyam and Wei, Lei (2023) Highly conductive graphenated-carbon nanotubes sheet with graphene foliates for counter electrode application in dye-sensitized solar cells. Pertanika Journal of Science and Technology, 31 (3). pp. 1325-1333. ISSN 0128-7680

Yusuff Marican, Mohamed Noordin and Abd. Razak, Shukor and Selamat, Ali and Othman, Siti Hajar (2023) Cyber security maturity assessment framework for technology startups: A systematic literature review. IEEE Access, 11 (NA). pp. 5442-5452. ISSN 2169-3536

Zainudin, Siti F. and Anuar, Aznah N. and M. Yuzir, Ali and Sharani, Noor A. and M. Aris, Alijah and Khor, Bee C. (2023) The granular sludge properties and performance evaluation of upflow anaerobic sludge blanket reactor as a pre-treatment for domestic wastewater. Chemical Engineering Transactions, 106 (NA). pp. 1189-1194. ISSN 2283-9216

Zak, Ali Khorsand and Hashim, Abdul Manaf (2023) Synthesis, characterization and cytotoxicity studies of Au-decorated graphene oxide nanosheets. Ceramics International, 49 (11). pp. 18577-18583. ISSN 0272-8842

Zakaria, Noor Jannah and Shapiai, Mohd. Ibrahim and Abd. Ghani, Rasli and Mohd. Yassin, Mohd. Najib and Ibrahim, Mohd. Zamri and Wahid, Nurbaiti (2023) Lane detection in autonomous vehicles: A Systematic Review. IEEE Access, 11 (NA). pp. 3729-3765. ISSN 2169-3536

Zhang, Jiahao and Huang, Bo and Fujita, Hamido and Zeng, Guohui and Liu, Jin (2023) FeQA: Fusion and enhancement of multi-source knowledge on question answering. Expert Systems with Applications, 227 (NA). NA-NA. ISSN 0957-4174

Zhang, Zhiqiang and Zhou, Funa and Karimi, Hamid Reza and Fujita, Hamido and Hu, Xiong and Wen, Chenglin and Wang, Tianzhen (2023) Attention gate guided multiscale recursive fusion strategy for deep neural network-based fault diagnosis. Engineering Applications of Artificial Intelligence, 126 (NA). NA-NA. ISSN 0952-1976

Zhou, Mi and Zhou, Ya-Jing and Liu, Xin-Bao and Wu, Jian and Fujita, Hamido and Herrera-Viedma, Enrique (2023) An adaptive two-stage consensus reaching process based on heterogeneous judgments and social relations for large-scale group decision making. Information Sciences, 644 (119280). NA-NA. ISSN 0020-0255

Zuikafly, Siti Nur Fatin and Ahmad, Harith and Ismail, Mohd. Faizal and Abdul Rahman, Mohd. Azizi and Yahya, Wira Jazair and Abu Husain, Nurulakmar and Abu Kassim, Khairil Anwar and Yahaya, Hafizal and Ahmad, Fauzan (2023) Dual regime mode-locked and Q-switched erbium-doped fiber laser by employing graphene filament-chitin film-based passive saturable absorber. Micromachines, 14 (5). pp. 1-17. ISSN 2072-666X

Zulkifli, Nur Aszreen and Shahira Liza, Shahira Liza and Hiroki, Akasaka and Kanao, Fukuda and Mohd. Rawian, Nur Adilah and Md. Ghazazi, Nur Afieqah and Mat Tahir, Noor Ayuma and Yaakob, Yazid (2023) Surface and tribology characterization of diamond-like carbon flakes reinforced oxide film by pulse anodizing. Ceramics International, 49 (21). pp. 34205-34222. ISSN 0272-8842

Conference or Workshop Item

Abd. Rahim, Muhamad Sharifuddin and Yakub, Fitri and Omar, Mas and Abd. Ghani, Rasli and Inge Dhamanti, Inge Dhamanti and Sivakumar, Soubraylu (2023) Prediction of influenza a cases in tropical climate country using deep learning model. In: 2023 IEEE 2nd National Biomedical Engineering Conference (NBEC), 5 September 2023-7 September 2023, Melaka, Malaysia.

Abdul Kadir, Khairul Anwar and Nazmi, Nurhazimah and Yamamoto, Shinichirou and Mazlan, Saiful Amri and Nordin, Nur Azmah and Mohd. Yusuf, Shahir (2023) A review on torque performance for different type of carrier fluid in magnetorheological brake. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Abdul Rahman, Nor Azian and Abdul Rahim, Zulhasni (2023) Determinants influencing supply chain technology adoption towards the performance of micro, small, and medium enterprises in Malaysia. In: 2nd International Conference on Business, Finance, Management and Economics (BIZFAME), 21 Jun 2023 - 22 Jun 2023, UiTM Kedah, Malaysia - Online.

Ahmad, Syafiq Asyraff and Zaki, Sheikh Ahmad and Azizan, Azizul and Md. Taib, Noor Syazwanee (2023) Performance of machine learning algorithms considering spatial effects assessment for indoor personal thermal comfort in air-conditioned workplace. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 - 23 May 2023, Tokyo, Japan.

Ahmad Faudzi, Masyura and Che Cob, Zaihisma and Sharudin, Sharul Azim and Omar, Ridha and Ghazali, Masitah (2023) The effects of user interface design for mobile learning application on learner's extraneous cognitive load: A conceptual framework. In: 9th Asian HCI Symposium, Asian CHI 2023, 28 April 2023, Virtual, Online, Indonesia.

Alimin, Ahmad Jais and Selamat, Hazlina and Muslim, Mohd. Taufiq and Msduki, Muhammad Mazizan and Mohd. Nordin, Adli Amir (2023) The potentials of retrofitting existing motorcycles with an aftermarket EFI system to suppress exhaust emissions at higher road speeds. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021-26 August 2021, Virtual, Online, Parit Raja, Johor, Malaysia.

Amrun, M. D. and Tuan Kamaruddin, T. N. A. and Abu Husain, N. and Aminanda, Y. and Meor Said, M. A. and Ma’aram, A. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2023) A review on the autonomous technology in ASEAN NCAP. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021-10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Ang, X. Y. and Koesoemadinata, V. C. and Md. Khudzari, J. and Abdullah, N. and Iwamoto, K. (2023) Production of biocoke From microalgae powder. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022 - 26 October 2022, Kuala Lumpur, Malaysia.

Awang Lah, Airull Azizi and David, Allen Paul and Muhamad Aliza, Hanun Enani and Md. Yusoff, Nelidya and Ambran, Sumiaty and Sulaiman, Abdul Hadi and Salleh, Mohd. Shahril (2023) Multiwavelength random fiber laser based on dual-bidirectional SOA at different comb filters. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023 - 16 August 2023, Kuala Lumpur, Malaysia.

Awang Lah, Airull Azizi and Sulaiman, Abdul Hadi and Muhamad Aliza, Hanun Enani and Md. Yusoff, Nelidya and Ambran, Sumiaty and David, Allen Paul and Salleh, Mohd. Shahril (2023) Multiwavelength random fiber laser using dual bidirectional semiconductor optical amplifiers and PMF-based Mach-Zehnder interferometer. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023 - 16 August 2023, Kuala Lumpur, Malaysia.

Azzahari, N. and Sapingi, H. H. J. and Ambran, S. and Razali, N. M. and Ling, O. W. (2023) Simulation of graphene coated D-shaped optical fiber sensor for petrochemical detection. In: 2023 IEEE International Conference on Sensors and Nanotechnology (SENNANO), 26 September 2023-27 September 2023, Putrajaya, Malaysia.

Chaabane, Raoudha and Jemni, Abdelmajid and Che Sidik, Nor Azwadi and Hong, Wei Xian (2023) Numerical study of magneto-hydrodynamic free convection heat transfer and fluid flow. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Chaabane, Raoudha and Jemni, Abdelmajid and Che Sidik, Nor Azwadi and Hong, Wei Xian (2023) Unsteady free convection with volumetric-radiation using LBM. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

David, Allen Paul and Sulaiman, Abdul Hadi and Muhamad Aliza, Hanun Enani and Awang Lah, Airull Azizi and Ibrahim, Siti Azlida and Md. Yusoff, Nelidya (2023) Multiwavelength random fiber laser based on bidirectional SOA and Lyot filter. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023 - 16 August 2023, Kuala Lumpur, Malaysia.

Ghazali, Masitah and Miftach Chairuna Sara Artha, Miftach Chairuna Sara Artha and Othman, Nur Zuraifah Syazrah (2023) A study on user interface design in learning Arabic alphabets for dyslexic children. In: 9th Asian HCI Symposium, Asian CHI 2023, Virtual, Online, Indonesia, 28 April 2023.

Gorment, Nor Zakiah and Selamat, Ali and Krejcar, Ondrej (2023) Obfuscated malware detection: Impacts on detection methods. In: 15th International scientific conferences on research and applications in the field of intelligent information and database systems, ACIIDS 2023, 24 July 2023 - 26 July 2023, Phuket, Thailand.

Guan, Low Ming and Yakub, Fitri and Mohd. Hanapiah, Ahmad Redzuan and Abd. Rahim, Muhamad Sharifuddin and Azizan, Azizul and Ab. Rashid, Mohd. Zamzuri (2023) Water quality detection system using real time vision computing with trash collector. In: 14th Control and System Graduate Research Colloquium (ICSGRC), 5 August 2023, Shah Alam, Malaysia.

Hamami, M. G. M. and Ismail, Z. H. (2023) Dragonfly algorithm strategy parameters analysis on swarm robot multi-target search efficiency. In: 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023, 3 March 2023 - 4 March 2023, Kedah, Malaysia.

Hong, Wei Chee and Fukuda, Kanao and Kamis, Shahira Liza (2023) Influences of atmospheric humidity on sliding speed characteristics of dry sliding phenomena. In: 9th International Tribology Conference, Fukuoka 2023, 25 September 2023 - 30 September 2023, Fukuoka, Japan.

Husni, Zul Hazran and Ahmad Shatiry, M. Sahir and Harun, Firdaus and Sarip, Shamsul and Abd. Rahim, Zulhasni (2023) Critical success factors (CSFs) in brownfield construction project. In: 11th International Conference on Applied Science and Technology 2022, ICAST 2022, 13 June 2022 - 14 June 2022, Putrajaya, Malaysia - Hybrid.

Iqbal, M. S. and Rahim, Z. A. and Abdul Rahman, N. A. (2023) A review of hydrogen as a transformative technology for Malaysia's industrial and research sectors. In: 6th International Conference of Chemical Engineering and Industrial Biotechnology, ICCEIB 2022, 15 August 2022 – 16 August 2022, Pahang, Malaysia.

Irfan Bahiuddin, Irfan Bahiuddin and Tegar Prasetyo, Tegar Prasetyo and Dafa Rezy Pratama, Dafa Rezy Pratama and Fitrian Imaduddin, Fitrian Imaduddin and Mazlan, Saiful Amri and Surojo, Surojo (2023) An optimum tuning of machine learning methods for predicting magnetorheological damper damping force for shock and vibration mitigation. In: 8th International Conference on Instrumentation, Control, and Automation, ICA 2023, 9 August 2023 - 11 August 2023, Jakarta, Indonesia.

Ishak, Siti Aisyah and Yunas, Jumril and Hashim, Abdul Manaf (2023) The effects of particle sizes of neodymium iron boron microstructure on the magnetic characteristics. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2023, 28 August 2023 - 30 August 2023, Langkawi, Kedah, Malaysia.

Jaapar, Abd. Rasid and Md. Aripin, Mohamad Faruq Syahmi and Komoo, Ibrahim and Ali, Che Aziz and Ramli, Zamri and Harun, Abd. Rahim and Bachat, James and Mohamad, Zakaria and Che Omar, Rohayu and Razak, Khamarrul Azahari and Lim, Choun Sian (2023) The emerging widespread debris flow disasters in tropical terrain of peninsular Malaysia: Understanding the risk and policy intervention. In: 8th International Conference on Debris Flow Hazard Mitigation, DFHM 2023, 26 June 2023 - 29 June 2023, Torino, Italy.

Kok, Y. H. and Kamarulzaman, N. and Mohd. Shadzalli, Z. F. and Abdul Manaf, N. and Ku Azman Shah, Ku Nur Afrina and Mohd. Yusop, Mohd. Zamri and Mohd. Rohani, Jafri and Budi Hartono, Budi Hartono and Tuyen, Nguyen Duc (2023) Control analysis of biomass gasification with combined heat and power system. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021-5 November 2021, Virtual, Online, Malaysia.

Liew, W. L. and Hee, Y. Y. and Mohd. Nazri, N. A. and Muda, K. and Zaidi, N. S. (2023) Preliminary study on the occurrence of microplastics in a local sewage treatment plant. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022-26 October 2022, Kuala Lumpur, Malaysia.

Mamat, N. and Othman, M. F. and Yakub, F. (2023) Analysis on seismic control strategies for structural control device: A comparative study. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022-26 October 2022, Kuala Lumpur, Malaysia.

Manan, K. E. and Yakub, F. and Rashid, M. Z. A. and Ahmad, M. A. and Minhat, M. S. (2023) Reactor protection system conceptual design for Triga Puspati reactor using labview software. In: 1st International Postgraduate Conference on Ocean Engineering Technology and Informatics 2021, IPCOETI 2021, 21 June 2021 - 22 June 2021, Kuala Terengganu, Terengganu, Malaysia - Virtual, Online.

Md. Taib, Noor Syazwanee and Zaki, Sheikh Ahmad and Rijal, Hom Bahadur and Abd. Razak, Azli and Yakub, Fitri and Mat Ali, Mohamed Sukri and Othman, Nor'Azizi (2023) Effect of office design characteristics and anthropometrics on thermal comfort in Malaysian universities air-conditioned buildings. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 - 23 May 2023, Tokyo, Japan.

Mohamad, Masilah and Tasnim, Rahayu and Ya’kob, Siti Aisyah (2023) Continued use of food delivery applications (FDAS) post COVID-19 in Malaysia: Barriers and growth. In: 2nd International Conference on Business, Finance, Management and Economics (BIZFAME), 21 Jun 2023 - 24 Jun 2023, UiTM Kedah, Malaysia - Online.

Mohamed Isa, Eleen Dayana and Shameli, Kamyar and Che Jusoh, Nurfatehah Wahyuny and Hazan, Roshasnorlyza and Che Sidik, Nor Azwadi (2023) Effect of pullulan amount on ZnO NPs via sol–gel technique. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Mohd. Hussain, Siti Hajar and Tasnim, Rahayu (2023) Enhancing undergraduates' digital competencies through a mentorship model. In: 2nd International Conference on Business, Finance, Management and Economics (BIZFAME), 21 Jun 2023 - 22 Jun 2023, UiTM Kedah, Malaysia - Online.

Mohd. Mokhtar, Mohamad Aizad and Ali, Roshafima Rasit and Che Jusoh, Nurfatehah Wahyuny and Lei, Zhongfang and Tarmizi, Zatil Izzah and Prasetyoko, Didik (2023) Progress in biosynthesized of silver nanoparticles as sustainable approach for photocatalytic wastewater treatment. In: 7th Asia Conference on Environment and Sustainable Development, ACESD 2022, 4 November 2022 - 6 November 2022, Kyoto, Japan.

Mohd. Tobi, Siti Uzairiah and Razak, Khamarrul Azahari and Siow, Y. M. and Ramlee, L. H. S. and Mohamed Aris, Nur Arzwin (2023) Empowering women for disaster risk reduction: a case study of geologically based disaster at Yan, Kedah, Malaysia. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022 - 26 October 2022, Kuala Lumpur, Malaysia.

Mohd. Yusuf, Shahir and Che Sidik, Nor Azwadi and Gao, Nong (2023) Using X-Ray computed tomography for effective porosity characterisation in additively manufactured metallic parts. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Muhamad Aliza, Hanun Enani and Sulaiman, Abdul Hadi and Md. Yusoff, Nelidya and Jamaludin, Md. Zaini and Abdullah, Fairuz and Ismail, Aiman and David, Allen Paul and Awang Lah, Airull Azizi (2023) Flatness investigation of multiwavelength SOA random fiber laser based on Sagnac loop mirror. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023 - 16 August 2023, Kuala Lumpur, Malaysia.

N., Isa and P., Tamunaidu and A. H. M., Ali and M., Goto and Yen, L. P. and V., Balasundram and N. M., Huzir and M. B., Rosly and M. H., Hussin and A. N. R., Amin (2023) Impact of pandemic COVID-19 on solid waste compositional trends in Pasar Awam Maharani Muar. In: 2nd International Conference on Environmental Sustainability and Resource Security, IC-ENSURES 2022, 8 March 2022 - 9 March 2022, Johor Bahru, Johor, Malaysia - Virtual, Online.

N., Jusoh and Rahim M.Q.F.A., Rahim M.Q.F.A. and F. S., Othman and S. E., Mohamad and N., Abdullah (2023) Isolation and characterization of biological soil crust forming algae from Malaysia. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022 - 26 October 2022, Kuala Lumpur, Malaysia.

N. M., Huzir and M. H., Hussin and M. B., Rosly and N. R., Amin A. and A. A., Asmadi and A. H., Md Ali and V., Balasundram and Yen, L. P. and M., Goto and P., Tamunaidu (2023) Rapid production of organic fertilizer using subcritical water treatment on waste biomass. In: 2nd International Conference on Environmental Sustainability and Resource Security, IC-ENSURES 2022, 8 March 2022 - 9 March 2022, Johor Bahru, Johor, Malaysia - Virtual, Online.

Nasaruddin, Nur Farhana Najwa and Abdul Halim, Hairul Nazirah and Mahmad Rozi, Siti Khalijah and Mokhtar, Zulfakar and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny (2023) Performance of alkali-treated spent coffee ground as potential adsorbent for oil adsorption. In: 1st International Conference of Chemical Science, Engineering, and Technology, ICO-CSET 2021, 6 September 2021-7 September 2021, Virtual, Online, Perlis, Malaysia.

Noge, Hirofumi and Nakano, Chiyu and Abdul Kadir, Hasannuddin and Yahya, Wira Jazair and Ueno, Yoshie (2023) Optimization of recovery and quality of second generation bio diesel fuel produced from palm acid oil by composite base metal catalysts supported on particulate silica gel. In: 31st European Biomass Conference and Exhibition, EUBCE 2023, 5 June 2023 - 8 June 2023, Bologna, Italy.

Noor Fawazi, Noor Fawazi and Azraei, Amirul and Wan Muhammad Haziq, Wan Muhammad Haziq and Muhammad Hakimi, Muhammad Hakimi (2023) The performance degradation of a dried vacuum pump utilizing statistical time domain parameters and STFT vibration signal monitoring. In: International Conference Of SNIKOM 2021, 18 September 2021, Medan, Indonesia.

Noor Fawazi, Noor Fawazi and Man, M. H. C. and Amiruddin, M. A. (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Experimental approach. In: International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan, Indonesia.

Noor Fawazi, Noor Fawazi and Mqan, M. H. C. and Amiruddin, M. A. (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Numerical approach. In: International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan, Indonesia.

Ooi, Hon Min and Munawer, Mohamad Huzair and Kiew, Peck Loo (2023) Extraction of chitosan from fish scale for food preservation and shelf-life enhancer. In: 7th International Conference on Environment 2021, ICENV 2021, 6 October 2021 - 7 October 2021, Penang, Malaysia.

Prabhakara, Hafizh Arsa and Nugroho, Rizki S. and Bahiuddin, Irfan and Imaduddin, Fitrian and Nazmi, Nurhazimah and Chazim, Ryandhi R. and Mazlan, Saiful Amri (2023) Modeling of a magnetorheological valve design based on artificial neural networks for heavy equipment cabin application. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023, 17 October 2023 - 18 October 2023, Kuala Lumpur, Malaysia.

Qatyan, Ahlam Ba and Abdul Rahim, Zulhasni (2023) A technology pillars for civil engineering industries related to the fourth industrial revolution toward organizational sustainability. In: 7th International Congress on Information and Communication Technology, ICICT 2022, 21 February 2022 - 24 February 2022, Virtual, London, England.

Quratu Aini, Quratu Aini and Muljono, Muljono and Yakub, Fitri (2023) Performance improvement of poem genre classification using a combination of SMOTE and support vector machine. In: 2023 International Seminar on Application for Technology of Information and Communication (iSemantic), 16 September 2023-17 September 2023, Semarang, Indonesia.

Rajiman, Viga and Abdul Halim, Hairul Nazirah and Tan, Lian See (2023) Nitrate adsorption using spent coffee ground: kinetics, isotherm, and thermodynamic studies. In: 2nd International Conference on Biomass Utilization and Sustainable Energy, ICoBiomasSE 2022, 20 September 2022 - 21 September 2022, Perlis, Malaysia - Virtual, Online.

Ram, Dharma Darren and Mohammad Haniff, Muhammad Aniq Shazni and Hashim, Abdul Manaf and Mohamed, Mohd. Ambri (2023) Thermal conductivity of stacked Hexagonal Boron Nitride (hBN) and Graphene-A molecular dynamics approach. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2023, 28 August 2023 - 30 August 2023, Langkawi, Kedah, Malaysia.

Saadun, Mohd. Noor Asril and Che Sidik, Nor Azwadi and Teng, Meng Xian and Mohd. Rosli, Mohd. Afzanizam (2023) Numerical studies for small-scale solar chimney power plants with various geometric configurations. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Saealal, Muhammad Salihin and Ibrahim, Mohd. Zamri and Shapiai, Mohd. Ibrahim and Fadilah, Norasyikin (2023) In-The-Wild deepfake detection using adaptable CNN models with visual class activation mapping for improved accuracy. In: 5th International Conference on Computer Communication and the Internet, ICCCI, 23 June 2023-25 June 2023, Fujisawa, Japan.

Sin Yee, Chen and Yusuf, Sara Yasina and Mohd. Noor, Syazwaana and Jamian, Nor Ruwaida and Ramli, Norazrin and Naidu, Dewika and Monica, Matei (2023) Unravelling the deposition of indoor microplastics at various heights across rooms. In: 5th International Conference on Green Environmental Engineering and Technology, IConGEET 2023, 23 August 2023 - 24 August 2023, Langkawi, Kedah, Malaysia.

Tan, Whitney Wee Nee and Lam, Man Kee and Dasan, Yaleeni Kanna and Lim, Jun Wei and Ho, Yeek Chia and Cheng, Yoke Wang and Chong, Chi Cheng and Show, Pau Loke and Tan, Inn Shi and Kiew, Peck Loo (2023) The impact of introducing liquid-type carbon towards the growth performance and lipid accumulation of microalgae. In: 2nd International Conference on Engineering and Industrial Technology, ICEIT 2021 in Conjunction with the Silpakorn International Conference on Total Art and Science, SICTAS 2021, 23 November 2021 - 25 November 2021, Nakhon Pathom, Thailand - Virtual, Online.

Tegar Prasetyo, Tegar Prasetyo and Irfan Bahiuddin, Irfan Bahiuddin and Dafa Rezy Pratama, Dafa Rezy Pratama and Surojo, Surojo and Mohammed Ariff, Mohd. Hatta (2023) Fuzzy logic based-assistance system for detecting forklift blind spot area using radar-like-ultrasonic sensors. In: IEEE International Conference on Internet of Things and Intelligence Systems, IoTaIS 2023, 28 November 2023 - 30 November 2023, Hybrid, Bali, Indonesia.

Tharumalingam, Pavithra and M. Salleh, M. Zulhaziman and Zaini, Nabilah and Alias, Nurhidayah and Zulbadli, Nazlina and Vasanthasegaran, Shabinthran and Nordin, Norsuhadat (2023) Improvement of carbon dioxide adsorption by the effect of concentration on blended amine-kenaf impregnation in IsoSORP analyzer. In: 7th International Conference on Environment 2021, ICENV 2021, 6 October 2021 - 7 October 2021, Penang, Malaysia.

Wahab, M. and Rushdan Zaim, I. N. and Ismail, H. F. and Othman, N. and Hara, H. and Md. Akhir, F. N. (2023) Evaluation of flavonoid compound in coconut waste and its antioxidant activity. In: 7th Malaysia-Japan Joint International Conference 2022, MJJIC 2022, 25 October 2022 - 26 October 2022, Kuala Lumpur, Malaysia.

Wahyu Dwi Aprian, Wahyu Dwi Aprian and Ubaidillah, Ubaidillah and Muhammad Nizam, Muhammad Nizam and Mufti Reza Aulia Putra, Mufti Reza Aulia Putra and Mazlan, Saiful Amri (2023) The number of slots and electromagnetic core effects on Eddy Current Brake performance: a computational approach. In: 5th International Conference on Mechanical Engineering, ICOME 2021, 25 August 2021 - 26 August 2021, Virtual, Institut Teknologi Sepuluh Nopember, Indonesia.

Wan Mahdi, Wan Nur Izzati and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Abdul Rashid, Muhammad Adib and Abd. Kadir, Hasannuddin (2023) The effect of different in-line mixing method of water-in-diesel emulsion fuel on the diesel engine performance. In: 2nd International Recent Trends in Technology, Engineering and Computing Conference, IRTTEC 2021, 29 September 2021 - 30 September 2021, Kelantan, Malaysia - Virtual, Online.

Wong, Pui Ching and Abdullah, Shahrum Shah and Shapiai, Mohd. Ibrahim (2023) Enhancing multi-stage classification of alzheimer's disease with attention mechanism. In: 2023 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET), 12 September 2023-14 September 2023, Kota Kinabalu, Sabah, Malaysia.

Yusefi, Mostafa and Shameli, Kamyar and Chan, Justin Zhe and Che Sidik, Nor Azwadi (2023) Preparation and characterization of cross-linked chitosan/cellulose bionanohybrids. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, UMP, Pahang, Malaysia.

Zulkarnain, Zulkarnain and Mohammed Ariff, Mohd. Hatta and Zamzuri, Hairi (2023) Adaptive model predictive controller (MPC) hybrid with braking torque distribution for trajectory tracking on autonomous vehicle: A review. In: Sriwijaya International Conference on Engineering and Technology 2021, SICETO 2021, 25 October 2021–26 October 2021, Palembang, Indonesia.