| Login |
Items where Year is 2017
Number of items at this level: 7. Emami, S. Davazdah and Kasmani, R. M. and Naserzadeh, Z. and Che Hassan, C. R. and Hamid, M. D. (2017) Experimental study on the flame acceleration of premixed hydrocarbons-hydrogen/air mixtures in tee pipes. Journal of Loss Prevention in the Process Industries, 45 . pp. 229-241. ISSN 9504-230x Kadhim, F. S. and Samsuri, A. and Idris, A. K. and Al-Dunainawi, Y. (2017) The use of artificial neural network to predict correlation of cementation factor to petrophysical properties in Yamamma formation. International Journal of Oil, Gas and Coal Technology, 16 (4). pp. 363-376. ISSN 1753-3317 Noruddin, N. A. and Sulaiman, W. R. W. and Ismail, A. R. (2017) Effect of distance intermittent ultrasonic wave source on the surfactant-polymer flooding recovery and its displacement pattern. Chemical Engineering Transactions, 56 . pp. 1435-1440. ISSN 2283-9216 Siddiqui, Numair A. and Mathew, Manoj. J. and Menier, David and Hassaan, M. (2017) 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field. JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY, 7 (2). pp. 417-432. Wan Sulaiman, Wan Rosli and Ismail, Abdul Razak and Uche Onuoha, Mac Darlington and Piroozian, Ali and Zahir Abbda, Serajddin Mohamed and Ismail, Issham (2017) Improving drilled cuttings lifting using polypropylene beads in water- based mud at different annular mud velocities. International Journal of Engineering and Technology (IJET), 9 (4). pp. 300-303. ISSN 1793-8236 Yekeen, N. and Idris, A. K. and Manan, M. A. and Samin, A. M. (2017) Experimental study of the influence of silica nanoparticles on the bulk stability of SDS-foam in the presence of oil. Journal of Dispersion Science and Technology, 38 (4). pp. 416-424. ISSN 0193-2691 Yekeen, N. and Idris, A. K. and Manan, M. A. and Samin, A. M. and Risal, A. R. and Kun, T. X. (2017) Bulk and bubble-scale experimental studies of influence of nanoparticles on foam stability. Chinese Journal of Chemical Engineering, 25 (3). pp. 347-357. ISSN 1004-9541 |
