Items where Year is 2015

A

A. Bakar, Nor Amira (2015) Available transfer capability based on randomly generated probabilistic distribution function of wind speed using Monte Carlo simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

A. Shukor, Nurbiha and Abu, Mohd. Salleh and Ahmad, Norazlina (2015) A preliminary study on socially shared regulation during online collaborative mathematics learning. 2015 IEEE Conference on e-Learning, e-Management and e-Services (IC3e) .

Ab. Karim, Rozaliana (2015) Biochemical and morphological changes of UVB-Irradiated human skin fibroblast (HSF1184) cells on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Munap, Daing Hanum Farhana (2015) Hydrocarbon concentration measurement by using fiber optic displacement sensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abba, Mustapha (2015) Screening and characterization of cellulolytic bacteria isolated from arctic soil and sediment samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abboud, Ayad Sami (2015) Calcium alginate caged multiwalled carbon nanotubes for the pre-concentration of polycyclic aromatic hydrocarbons from environmental water samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Aziz, Nurul Hazirah (2015) System identification and control of the horizontal motion of a twin rotor multi-input multi-output system (TRMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Hakim, Nur Wahidah (2015) Mechanical, thermal and physical properties of chitosan and chitin filled compatibilized polyamide-6/polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Hamid, Hazirah (2015) Combination of low pressure steam heating and dilute acid pretreatment of palm biomass for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Hamid, Noorhayati (2015) Jabatan Kerja Raya project delivery excellence through effective project communication management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Karim, Nurul Izzati (2015) Scale fees information application for mobile user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abd. Rahim, Siti Hajar (2015) Formulation of a new filter aids material for fabric filtration system. Masters thesis, Malaysia-Japan International Institute of Technology.

Abd. Wahab, Muhammad Syimir (2015) Trend of parking demand at Machap Northbound Rest Area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Wahab, Nur Amira (2015) Radon and thoron study in areas of elevated background radiation in Palong, Segamat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdolahi, Ahmad (2015) Conductive polymer coatings towards inhibition of microbial-induced corrosion of low carbon steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdolvahab, Ehsani Rad (2015) Enhanced level set segmentation method for dental caries detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdul Aziz, Nur Azmyra (2015) Mechanical, thermal and characterization of chitosan, nano precipitated calcium carbonate single and hybrid filler/ poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Hamid, Abdul Rahim (2015) Performance of cold in place recycle method for different stabilization agents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Kadir, Sukwan (2015) Kepimpinan transformasi guru besar di daerah Bulukumba Sulawesi Selatan Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Latiff, Norliza (2015) Fractionation and characterization of polyphenols rich extract from labisia pumila leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Manap, Nurasyidah (2015) Particle bombardment-mediated transformation of Malaysian rice MR 232 callus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdul Rabu, Siti Nazleen (2015) Online instructor scaffolding in enhancing undergraduate students' critical thinking. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Rahim, Mohamad Ashrulnizam (2015) Incentivising knowledge sharing behavior among JKR profesional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Arif Farhan (2015) Simulation of space charge in electric double layer capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahman, Qotrunnada (2015) Seismic behaviour of low-ductile moment resistance frame under far field earthquake excitations considering soft-storey phenomenon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Siti Saimah (2015) Performance of bearing capacity for eco-friendly raft pile foundation system (ERP System) in soft soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Raman, Syazwani (2015) Innovation and research and development in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rashid, Fauziah (2015) Determination of precise geodetic coordinate using global navigation satellite system (GNSS) precise point positioning method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Razak, Muhammad Nizam (2015) High resolution impulse analysing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Samad, Noraini (2015) Signal interference to electroencephalogram and electrocardiogram signal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Sukur, Muhammad Ishak (2015) Hybrid dielectric resonator antenna for ultra high frequency band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdull Rani, Siti Nurhidayah Naqiah (2015) Prediction of free fatty acid in crude palm oil using near infrared spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Ahmad Ammar Luqman (2015) Cost estimation model of structural steel for superstructure of wellhead platform in oil and gas industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Arman Shah (2015) Influence of ultrasonic vibration on TiN coated biomedical TI-13Zr-13Nb alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Farizul Nizam (2015) Influences of groundwater, rainfall, and tides on beach profiles changes at Desaru beach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Haryani (2015) The study of controlled release propagating substrate (CRPS) and NPK-Organo-Zeolite on the growth of Clinacanthus Nutans. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdullah, Ilias (2015) Soil improvement for taxiway and apron due to soft ground problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Jaharatul Dini Karen Lee (2015) Optimum utilization of quarry dust as partial replacement of sand in green concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Majid Abdullateef (2015) Control of energy conversion in a hybrid wind and ultracapacitor energy system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Mohd. Shafiq (2015) Residents’ perception of community based sport tourism related activities in Sarawak. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Suhail Najm (2015) Development of microwave sensing system to measure the sweetness and ripeness of pineapple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullahi, Tijjani (2015) Adhesion of polymer coated steel wire by compression molding and extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdussalam, Mamoon (2015) Mechanical properties of HFCVD microcrystaline diamond coated on seeded WC substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abedinpourshotorban, Hosein (2015) Branch coverage test case generation using genetic algorithm and harmony search. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abidin, Zauwiah (2015) Penggunaan huruf Ya’ dalam sintaksis bahasa arab dalam kalangan pelajar Madrasah Alsagoff Al-Arabiah, Singapura. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Abu Bakar, Khairul Asraf (2015) The study of training needs analysis (TNA) practice in manufacturing companies in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abu Bakar, Noorilyana (2015) An optimization of mixing process parameters for soy sauce production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Noorsakinah (2015) Effective location of thyristor controlled series capacitor by sensitivity based method for congestion management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Bakar, Nur Najihah (2015) An improved method for university building’s energy efficiency index using cluster approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Hanifah, Noor Zati Hani (2015) Kajian radiologi alam sekitar di Iskandar Malaysia, Johor, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Hassan, Nur Rasyiqah (2015) Liveable city from the resident‘s perception of urban design quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Kasim, Syamsul Anuar (2015) Accuracy assessment of height coordinate using unmanned aerial vehicle images based on orthometric height. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Mhareb, Mohammad Hasan Salman (2015) Dosimetric properties of lithium magnesium borate glasses doped with dysprosium and phosphorus oxide for radiation dose measurement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu. Samaan, Noor Fazura (2015) Land acquisition issues for Jabatan Kerja Raya's road work project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abubakar, Alkali Ibrahim (2015) Familial caregiving architectural provision in Nigerian hospital wards. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abubakar, Musa Ahmed (2015) Antibacterial activity of persicaria minor (Huds.) leaf-extracts against bacterial pathogens. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abuhashish, Faris Amin Muflih (2015) Classification technique for human emotion in virtual reality using game-based brain computer interface. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Adiputra, Mohamad Fariz (2015) Risk control enhancement using safety climate factors for HIRARC method in steel product industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adzhar, Noraziah (2015) An enhanced simulated annealing approach for cylindrical, rectangular mesh, and semi-diagonal torus network topologies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aghabababaeyan, Reza (2015) A robust against rotation attack watermarking technique based on wavelet transform. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Ahamad, Abdul Hadi (2015) Strategies to enhance application of SIRIM eco-label products in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azniza (2015) Modeling of water tree degradation in underground polymeric power cable using time domain reflectometry method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Hasnita (2015) The new payment clauses in the PWD 203/203A (REV. 1/2010) conditions of contract in aligning to CIPAA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Ismail (2015) Modelling and simulation of PWM switched autotransformer for voltage SAG mitigation using MATLAB/SIMULINK. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Muhammad ‘Aasim Asyafi’ie (2015) The effect of reverberant sound level on the intelligibility of spoken Malay words. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Nurul Fariha (2015) Seedless and catalyst-free growth of zinc oxide nanostructures on graphene by thermal evaporation. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Ahmad, Shaharudin (2015) A first principle approach for the strength analysis of a semi-swath vessel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Siti Fairus (2015) The impact of global financial crisis on the performance of Malaysian listed property companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad Dahalan, Amira Sarayati (2015) Data sampling time scheduling based on maximum allowable loop delay for networked control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Fauzi, Muhammad Nazirul (2015) Inventory for knowledge management in construction organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Kamal, Muhammad Safwan (2015) Electrical and chemical properties of thermally aged vegetable-based oils as high voltage insulating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Kamil, Siti 'Aishah (2015) Fear of crime within non-gated residential communities in the urban context. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad Noorden, Ahmad Fakhrurrazi (2015) Optical bistability in mobius microring resonator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Salleh, Mazlina (2015) Risk management procedures for physical development projects in the Ministry of Education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shuhaimi, Fatin Amalina (2015) Chemometrics analysis of petroleum-based accelerants in fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Yasin Al-Sheyab, Saif Al-Deen (2015) Effect of antimicrobial agent toward bacteria from skin of cantaloupe fruit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Zubir, Meor Mohd. Fikri (2015) Biodegradation and metabolic pathway of cresol red dye by selected fungi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadi, Hossein (2015) Factors influencing adoption of hospital information system framework in Malaysian public hospitals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahmadi, Mohammad (2015) Evaluation of multistory buildings using performance-based seismic in life safety level. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Kadhim Zarzoor, (2015) Defect detection in pipeline using acoustic emission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Sadeq, Taha Mohammed (2015) System identification and position control of pneumatic actuator using embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Shoani, Mohamed Tahir (2015) Face-recognition based security robot incorporating omnidirectional vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Shoani, Mohamed Tahir (2015) Face-recognition based security robot incorporating omnidirectional vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahsan, Amin Mohamed (2015) New descriptor for object detection using an improved ensemble-based technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Akrom, Nuramirah (2015) Combined empirical mode decomposition and dynamic regression model for forecasting electricity load demand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Al-Hasan, Waleed S. Hasan (2015) A new steganography technique using magic square matrix and affine cipher. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al-Maimani, Maqbool Ramdhan Ibrahim (2015) Enhanced aspect level opinion mining knowledge extraction and representation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Al-Moalemi, Hafedh Ahmed Abdullah (2015) The effect of abrus precatorius methanol leaves extract in inhibiting glucose absorption in in vitro study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Al-Tamimi, Ammar Sabeeh Hmoud (2015) Block mode decision in H.265 using pixel topology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Albshir Budiea, Ahmed Mokhtar (2015) Long term prediction of pipeline corrosion under tropical seabed sediment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aldin Hosseini, Seyed Jamal (2015) Bond behavior of grouted spiral and splice connection under direct axial and flexural pullout load. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Derakhshanasl (2015) Improved covariance matrix evolution strategy algorithm for stochastic dynamic unequal area facility layouts in an open area. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Faizan (2015) A study on holistic customer experience in China’s related hotel and resorts. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Ali, Marlina and Abdul Talib, Corrienna and Ismail, Norulhuda (2015) An overview of research on experts and novice problem solvers in physics. Buletin Persatuan Pendidikan Sains dan Matematik Johor, 25 (1). pp. 70-75. ISSN 0128-4290

Ali, Surayahanim (2015) The effectiveness of continuing tourism related education (CTRE) for tourist guides in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali A., Header (2015) Experimental study of acoustic emission technique for concrete defect detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Albshayreh, Ali Otman (2015) Spam detection in email body using hybrid of artificial neural network and evolutionary algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alias, Elme (2015) Isolation and characterisation of mitochondrial protein from Orthosiphon stamenius in normal and copper stress conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alias, Muhammad Anwar (2015) Effect of cations on microbial aggregation using brevibacillus panacihumi strain ZB1, lysinibacillus fusiformis strain ZB2 and enterococcus faecalis strain ZL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Yusliza (2015) Effect of rock mass properties on skin friction of rock socket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alipour, Ameneh (2015) Improvement of power quality using UPFC in a multi bus distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Almasi, Davood (2015) Deposition of the hydroxyapatite particles on the polyether ether ketone surface for orthopaedic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alsarhan, Ali Ata Zidan (2015) Identification of commonly used medicinal plants in Kangkar Pulai and their therapeutic evaluation as anti-diabetic. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alsayyh, Moh’Dali Moustafa (2015) Improved image compression scheme using hybrid of discrete fourier, wavelets and cosine transformation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alvin, Paul (2015) In vitro antiviral activity of polygonum minus extracts against herpes simplex virus 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alzahrani, Mohammed Ali R. (2015) An e-portfolio acceptance model from lecturers perspective in Taif University. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alzubaidi, Mohammed Abdullah Omar (2015) Enhanced analysis of kippo-honeypot in cloud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Amaludin, Adriana Erica (2015) Performance of geothermal energy piles under thermo-axial loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aman Nor, Nor Farahiyah (2015) Influence of churning and thawing temperatures on yield and quality of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amechi, Uti Charles (2015) Strategic partner role as mediator in the relationship between human resource competencies and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Amin, Nor Fadila and Saud, Muhammad Sukri and Kamin, Yusri and Latib, Azlan and Mohd. Azmi, Nurul Ida (2015) International teaching practice in technical and vocational education. Advanced Science Letter . (Submitted)

Amir, Siti Norain and Johari, Siti Hawa and Jasmi, Kamarul Azmi (2015) Gugatan akidah: Bertawakal kepada selain Allah. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia.

Amran, Dayang Nur Fatthanah (2015) Influence of work team effectiveness on project delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amran, Nur Aireen (2015) Integrated system of automatic identification system (AIS) and radar fot port traffic management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amzee Zamri, Siti Norziahidayu (2015) A relation between tudung saji weaving patterns and group theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Anah, Syafwan (2015) Vessel traffic simulation at container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anas Basri Musthafa, (2015) Study on the performance of palm methyl ester in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Andalib, Ramin (2015) The characteristics of structural concrete using bacteria improvement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anuar, Nuhairi (2015) Design of the streaming processor architecture for microkernel controller and ALU. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ariff, Mohd. Afendi (2015) Piles performances behavior of marine structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arman Alias, (2015) Improved design solution for motion resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arputhasamy, Saravana Kumar (2015) Lightning as a new renewable energy source. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Arumugam, Gayathiri (2015) Antioxidative and antiproliferative activity of polygonum minus leaves extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Aspon, Siti Zulaiha (2015) Boundary integral equation with the generalized Neumann kernel for computing green’s function for multiply connected regions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Asral, Asral (2015) High amplitude wave liner effects on journal bearing performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

As’Sahra, Nur Fatimah (2015) Test case prioritization technique using sequence diagram and labeled transition systems in regression testing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Attaran, Seyed Ahmad (2015) Tensile, barrier, and degradation properties of low density polyethylene/epoxidized natural rubber nanocomposite films. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aujih, Ahmad Bukhari (2015) Accuracy and quickness criterion-based driving skill metric for human adaptive mechatronics system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Abd. Rahim (2015) Characteristics of coal ash mixtures as replacement materials in ground improvement works. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Noor'Aliaa (2015) Partial discharge characteristics on epox-bron noitrode nanocomposite due to ageing time under high voltage stress. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Nor Fauzana (2015) Tabu search method for solving multiobjective job shop scheduling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Awang @ Muda, Mohd. Aswarudin (2015) Framework of measurement engineer workload at Public Work Department district of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayokunle, Omoyola Tolulope (2015) The effect of balcony on thermal performance of high rise office building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ayop, Razman (2015) Sizing of energy storage based on loss of load probability of standalone photovoltaic systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azahar, Nur Syazana (2015) Electronic mucosa system for complex odour recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Aziz, Fazli (2015) Network reconfiguration and distributed generation sizing in radial distribution network using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azmi, Aizat (2015) Miniaturized planar capacitance tomography system using fan beam projection technique for stagnant samples visualization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aznam, Siti Nur Amalina (2015) Combustion visualization and measurement in a closed vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Baba, Umar Muktar (2015) Adsorption of carbon dioxide and methane on alkali metal exchanged silicoaluminophosphate zeolite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Babawuro, Shu’aibu and Muhammad, Usman and Saud, Muhammad Sukri and Kamin, Yusri (2015) Role of information and communication technology in the provision of career information in higher technical and vocational education institutions. Kasetsart Journal - Social Sciences, 36 (7). pp. 591-597. ISSN 2452-3151

Badrol Hisham, Mohd. Nazirol Syafiq (2015) Faktor persekitaran fizikal dalaman pejabat terhadap kepuasan pekerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Bagaber, Salem Salah Abdullah (2015) Preliminary study on bricks drying process using microwave technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagheri, Arash (2015) Real coded GA for tuning of semi-active railway vehicle suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagheri, Mahdi Mohammad (2015) The mediating role of supply chain integration and agility on SMEs performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Baghirov, Fakhri (2015) The adoption and performance of official facebook fan page (FFP) among global airline companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Baharim, Nor Bakhiah (2015) Spatial and temporal distributions of water physicochemical, sediment quality and sedimentation in Sembrong Reservoir. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharudin, Siti Mastura (2015) Interaksi dalam pembelajaran berasaskan masalah secara kolaboratif menerusi talian dan kesannya terhadap pemikiran kritis pelajar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baharum, Nurun Nabilah (2015) Analysis of Acalypha Indica extracts for antioxidant and antibacterial activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Baharvand, Afrouz (2015) Synthesis, characterization and application of hollow titania microspheres containing silver and gold nanoparticles in the photodegradation of pesticides. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Balash, Farhad (2015) Enhancement of junior academics professionalism through research and development activities in an Iranian Medical University. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baloch, Abdul Hameed (2015) Effect of different machining parameters on surface roughness of aluminum alloys based on Si and Mg content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bamiah, Mervat Adib (2015) Trusted cloud computing framework in critical industrial application. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Bandi, Shamsulhadi (2015) Framework development of bills of quantities accuracy in construction organisation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Banki, Mohammed Bala (2015) Empowering family owned tourism business in Obudu Mountain Resort. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Banu A., Ruksana (2015) The impact of work-life balance policies and work-life balance issues on employee’s satisfaction in Oman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Barau, Aliyu Salisu (2015) Measurement of rapid landscape fragmentation in Iskandar Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Basiron, Bushrah and Ahmad, Hasnul Nizam and Ibrahim, Izam Shahril (2015) Mahasiswa dan diet sihat. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Penampilan, Kesihatan, dan Aktiviti Sosial. Penerbit UTM Press, Skudai, Johor Bahru, pp. 21-40. ISBN 9789835210426 (Submitted)

Basiron, Bushrah and Mohd. Shubari, Mohammad Iqram (2015) Mahasiswa dan amalan kerohanian dalam kehidupan. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Asas Pembangunan Mahasiswa Jilid I. Penerbit UTM Press, Skudai, Johor Bahru, pp. 51-74. ISBN 978-983-52-1040-2 (Submitted)

Batumalai, Kavitah (2015) The relationship between survivor syndromes and job satisfaction and employees’ performance during mergers in RHB Asset Management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Beden, Mazin Abdulhussein (2015) Adsorption and stripping of ethanol from aqueous solution using sepabeads207 adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Benferdia, Youcef (2015) Integrating cooperative users to develop framework for an effective mobile physiotherapy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bohari, Nur Zu Ira (2015) Structural and luminescence properties of magnesium boro-tellurite doped europium and dysprosium ion ceramic. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Braim, Krekar Saber (2015) Settlement of strip footing on sandy soil due to eccentricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Brohi, Sarfraz Nawaz (2015) Secure cloud storage model to preserve confidentiality and integrity. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Bukar, Abba Lawan (2015) An improvement of voltage quality in low voltage distribution system using dynamic voltage restorer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Burtah, Muhamad Aswad (2015) Faktor-faktor membuat keputusan untuk penyumberan luar bagi perkhidmatan penyelenggaraan Institusi Pengajian Tinggi Awam di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

C

Chai, Hui Chung (2015) A rasch model analysis of critical thinking problem solving test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chai, Teck Jung (2015) Strength properties of 10 mm timber clinker aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Kian Hwa (2015) Fabrication of polyethersulfone membrane by polyethyleneglycol coated cobalt-doped iron oxide for copper (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan, Samuel Hsin Chlen (2015) Psychological stresses among divorced professional women. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Che Abd. Ghani, Asnida (2015) The parallelization of helmholtz equation related to breast cancer growth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Che Amat, Muhamad Firdaus (2015) Penilaian potensi perisian sumber terbuka dalam pengendalian data geospatial di pejabat tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Che Jusoh, Nurfatehah Wahyuny (2015) Electrosynthesis of zinc oxide-copper oxide supported on mesostructured silica nanoparticles for photocatalytic decolorization of methyl orange. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Mohd. Zain, Nurul Hanani (2015) Customer satisfaction measurement towards improving project delivery for Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Omar, Siti Shuwaibah (2015) The assessment of tailor-made optical fibre subjected to ionizing radiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Cheah, Hui Fuen (2015) Finfet based design of XOR and XNOR using HSPICE. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chegeni, Ali (2015) A system dynamic model for decision support system in lean construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chen, Siew Chin (2015) Optimization of formulation and process condition for downsizing of labisia pumila and ficus deltoidea loaded niosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Cheong, Chew Yee (2015) The relationship between HRD strategies, career success and employee retention. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Cheong, Lip Sing (2015) Flexural strength of fibre reinforced concrete under elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cheong, Wei Wei (2015) Implementation of unmanned aerial vehicle moving object detection algorithm on intel atom embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chew, Kew Hong (2015) Improved total site heat integration incorporating pressure drop and process modifications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chien, Cassendra Bong Phun (2015) Effective microorganisms on organic matter with carbon and nitrogen mineralisation for empty fruit bunches composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chin, Ee Mei (2015) Modeling and simulation of graphene three branch junction using verilog-A. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chin, Huei Chaeng (2015) Modeling the effects of phonon scattering in carbon nanotube and silicon nanowire field-effect transistors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chivatsi, Jonathan Nyoka (2015) Detection of structural deformation from 3D point clouds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chofreh, Abdoulmohammad Gholamzadeh (2015) A master plan for the implementation of sustainable enterprise resource planning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong, Chung Keong (2015) Enhancing SRAM performance of common gate FinFET by using controllable independent double gate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chong, Tin Fook (2015) Transaction-based industrial real estate price indices for Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua, Yong Ping (2015) Optimization of laser cutting parameter of acrylic by using DMAIC approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chum, Zhi Xian (2015) Isogeometric analysis of plane stress structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

D

D'Cruz, Ryan (2015) Mixed-income housing as an alternative to the ‘Projek Perumahan Rakyat’ in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Daddy, Zemnan Titus William (2015) Barriers to adoption of ISO 14001 environmental management system by the Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dahrawi Edrus, Sakinah (2015) Increasing the adoption of project management best practices in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dambatta, Murtala Sule (2015) Influence of heat treatment and severe plastic deformation (SPD) ON Zn-3Mg alloy properties for bio-implant application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Danlami, Jibrin Mohammed (2015) Supercritical carbon dioxide extraction of castor oil seed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dasmawati, Dasmawati (2015) Kemampuan kaunselor sekolah menengah atas negeri di Kota Makassar menghadapi perubahan organisasi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Daud, Mohd. Nor Siza (2015) Rehabilitating sewerage line system in congested urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dawi Saifuddin, Munirah (2015) Sedimentation analysis at Sarawak Kanan River. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Deba, Ahmad Aliyu (2015) Conceptual framework of service learning in technical and vocational education at the Nigerian tertiary education. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ding, James Tse Wen (2015) Interpreting contractual provision: extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dogara, Abdulrahman Mahmoud (2015) Amplification of partial rice florigen from Malaysian upland rice cultivar hitam and wai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Dong, Yao (2015) The relationship between communication practices and perception about performance within the team. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Drahman, Siti Hasyyati (2015) Composite honeycomb core sandwich plate with facesheet indentation model subjected to low-velocity impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

E

Ebadi, Hadi (2015) Physical attributes on place attachment in Malaysian urban parks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ee, Poey Guan (2015) CNFET-based design ternary logic design and arithmetic circuit simulation using HSPICE. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elengoe, Asita (2015) Enhancing human breast cancer cells destruction using combination of adenovirus expressing P53 and hyperthermia treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Elfartas, Hesham Omran (2015) Small town community social interaction in public spaces. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Elhabib, Mohamed A. Ateia (2015) The impact of board competency and ownership structure on firm performance. PhD thesis, Universiti Teknologi Malaysia,International Business School.

Elnehrawy, Naema Yousri Fatthallah (2015) In vitro study of polygonum minus extract effect on skin cells healing capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Elsayed, Ashraf Osman Ibrahim (2015) Learning enhancement of three-term backpropagation network based on elitist multi-objective evolutionary algorithms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Elsherbeiny, Mohamed Mohamed Takeyeldein (2015) Analysis of low wind speed small hawt using blade element momentum theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Eltwati, Ahmed Salama (2015) Structural performance of asphalt blocks pavement as related to thickness, binder types, and joint width. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Emami, Maryam (2015) Moderating effects of social environment on the relationship between individual components of creativity and creativity. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Ernawati, Andi (2015) Pengajaran holistik guru Sekolah Menengah Negeri Bandar Makassar, Sulawesi Selatan, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

F

Fahimeh Yazdani, (2015) Blood cells sorting using cotton threads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Farag Elhagari, Usama Tharwat (2015) A model-based testing framework for trusted platform module. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Fard Jahromi, Soudabeh Sabetian (2015) Construction and analysis of protein-protein interaction network associated with human sperm-egg interaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Faridmehr, Iman (2015) Seismic and progressive collapse assessment of new proposed steel connection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Farouk, Abbas Umar (2015) Enhanced exponentially weighted moving average (EWMA) control chart performance with autocorrelation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Faruk Lawan, Umar (2015) Comparative study of fifty potential evapotranspiration models for urban area in tropical region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fatemeh Nasrollahpourniazi, (2015) An optimization model for blocks allocation to service vessels in a port container terminl. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fatimah Mohammed Kadhim, (2015) Creep characteristics of austenitic stainless steel foils under oxidative and non-oxidative environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fong, Soon Fei (2015) Object classification using deep learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

G

Gajibo, Mohammed Mustapha (2015) Frequency reconfigurable metamaterial resonant antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gan, Gilbert Siang Yang (2015) Contractor's implied duty to warn design defects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghani, Muhamad Fadli (2015) Stability analysis of a small scale remotely operated underwater glider. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ghasemi, Moslem (2015) Local community’s perception of the appropriateness and success of tourism development models in lower Kinabatangan region, Sabah, East Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghazali, Razatulshima (2015) Knowledge integration mechanism as mediator between leadership styles and enterprise systems success. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Goh, Alfred Pui Teck (2015) Evaluation on Malaysia safety and health induction course for construction worker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Goh, Lyn Dee (2015) Multistage artificial neural network in structural damage detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Shee Yin (2015) Optimizing agrobacterium-mediated transformation parameters of melastoma decemfidum ROXB EX JACK. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Govindasamy, Yuvabalan (2015) A study to enhance risk management practice in Jabatan Kerja Raya projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

H

Hajmirsadeghi, Reihaneh Sadat (2015) Design factors that influence the effective use of Meydan in Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hambali, Nur Ashikyn (2015) Electrochemically deposited zinc oxide morphologies on graphene on insulators. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Hamdan, Siti Norhazirah (2015) Aplikasi E-Biz JUPEM geoportal dalam pembelian produk kadaster daripada perspektif pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamid, Kazemi Esfeh (2015) A computational fluid dynamic framework for modeling and simulation of proton exchange membrane fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamid, Noraziah (2015) Potensi pembangunan tanah wakaf melalui sumbangan tanggungjawab sosial korporat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamidi, Najaatul Farihah (2015) Application of demand side management strategies to reduce energy consumption in university buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamidon, Nurul Hanisah (2015) Synthesis, characterization and antibacterial activity of colloidal silver nanoparticles encapsulated in low generation poly(amido)amine dendrimers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamzah, Naemah (2015) Aplikasi amalan fiqh sains rumah tangga dan kerjaya dalam kalangan akademis wanita cemerlang. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Hamzah, Naemah and Mustari, Mohd. Ismail and Basiron , Bushrah (2015) Model keseimbangan kerjaya dan rumah tangga dalam kalangan wanita cemerlang sektor awam. Sains Humanika, 4 (1). pp. 37-46. ISSN 2289-6996

Hamzah, Norhilawati (2015) Treatment of starch-processing wastewater in sequencing batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hanapi, Zaliza (2015) Kesepadanan latihan terhadap pekerjaan dalam kalangan graduan kejuruteraan elektrik di kolej komuniti. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Harirchian, Ehsan (2015) Constructability comparison between IBS and conventional construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Surhan Jamil (2015) Analysis of marine incidents in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hartati, Hartati (2015) Pengekstrakan Swietenia mahagoni menggunakan karbon dioksida lampau genting dan potensi ekstrak sebagai penyembuh luka. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasan, Hasan (2015) Teacher professionalism and professional development practices in South Sulawesi Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hasan Sarkar, Md. Shamim (2015) Construction safety and management practices in Bangladesh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasanudin, Muhammad Akmal (2015) Investigation on morphology and structural properties of 2D carbon nanostructure grown via 150 MHz PECVD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasbullah, Nurul Ai'Zzah (2015) Effect of heat treatment on the microstructures and corrosion behaviour of quaternary mg-2.2zn-3.7re-0.5ca alloys for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Khairusy Syakirin Has-Yun (2015) Development of waste minimization awareness model for university campus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hashim, Mega Suria (2015) Pattern of wayfinding and spatial cognition for effective spatial planning of theme park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hashim, Napishah (2015) Modelling of crude oil prices using hybrid arima-garch model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim, Suhaizal (2015) Kesan sistem pembelajaran pentaksiran portfolio kolaboratif terhadap proses pentaksiran dan pembinaan pengetahuan pelajar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hassan, Hafiza Aini (2015) Features of discussion skills of high English as a second language performers among pre-university students. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hassan, Ibrahim (2015) Spatial and temporal modeling of regional groundwater level in context of climate change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Mas Ayu (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Norlizawati (2015) Shear strength parameters of improved organic soil by calcium base stabilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Nur Hafizah (2015) Synthesis, characterization and catalytic activity of palladium(ii) aroylhydrazone complexes in mizoroki-heck reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hassan Khalaf, Sarah (2015) Multiband MIMO antenna for wireless devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasseim, Anith Adibah (2015) Classification techniques for handwriting difficulties among children in early stage of academic life. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hatami, Somaieh (2015) Ultimate behaviour of reinforced concrete shear walls with octagonal openings. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heng, Hui Xian (2015) Enhancement of genetic algorithm for diabetic patient diet planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Herman, Herman (2015) Service quality optimisation scheme of mobile video stream service. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hew, Li Chyi (2015) Determinants of auction success and auction price premium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Ho, Peng Han (2015) The role of customer brand engagement in Facebook fan page. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hock, Cheong Jun Quan (2015) Fitting soil-water characteristic curve by using unimodal and bimodal soil physical properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hor, Win Han (2015) Neuro-network modelling and control of flexibly mounted cylindrical riser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Ali (2015) Determinants of knowledge sharing intention in e-learning. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Hummad, Saleha (2015) The relationship of personality and knowledge sharing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Husain, Affandi (2015) Printed document forgery detection using text reordering and mixing of matrices in zero watermarking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Husain, Arastu Sajjad (2015) LNG/Dual fuel powered fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husein, Nor Ain (2015) Control of group velocity dispersion in single mode fiber based on stimulated Brillouin scattering. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hussain, Hussain K. (2015) Assessing the moderating effects of organizational innovation on the relationship between transformational leadership and job satisfaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hussain, Jawad (2015) The effect of market and learning orientations on organizational performance of manufacturing small and medium sized enterprises in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hussain, Nor Hayati (2015) Thoughts on Malaysian architecture identity and design principles of Malayan architects co-partnership. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussein, Dler Hassan (2015) Behaviour of rubberized asphalt mixture subjected to thermal loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Noorsubha (2015) Determination of failure zone of vane shear test using artificial transparent soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Nurulfarhana (2015) Structural analysis of platelet-derived growth factor receptor alpha by protein homology modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

I

Ibrahim, Abdul Fatah (2015) Membangunkan sistem perolehan data berintegrasi kos rendah untuk pemantauan struktur kejuruteraan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ibrahim, Ahmadu (2015) Control of active suspension for full car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Ismadi (2015) Load distribution mesh routing for wireless mesh network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Mohammad Izazi (2015) Evaluation of various milling strategies in supporting advanced CAD/CAM environment for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Nor Adibah (2015) Mitigating inter-carrier interference in orthogonal frequency division multiplexing system using scaled alpha pulse shaping technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Suhaini (2015) Hubungan jaringan antara perusahaan kecil dan sederhana industri pelancongan di Kampung Cherating Lama, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Syahira (2015) Amylose content calibration model for the three types of selected rice grains using visible shortwave near infrared spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Thamer Rashid (2015) Experimental study of heat transfer in asphalt solar collector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Izni Husna (2015) Switchable and tunable multiband slot dipole antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Idris, Nor Amirah (2015) Mathematical modelling of unsteady biomagnetic fluid flow and heat transfer with gravitational acceleration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Idris, Nur Aini (2015) Tindakan pihak berkuasa negeri dan pihak berkuasa tempatan terhadap kes pelanggaran syarat guna tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Idris, Zainab Ladidi (2015) Diversity of culturable psychrotrophic bacteria from arctic soil samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Imaduddin, Fitrian (2015) A novel magnetorheological valve with meandering flow path structure. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Imani, Aliakbar (2015) Metaphor analysis of Dr. Mahathir’s business speeches. PhD thesis, Universiti Teknologi Malaysia, Language Academy.

Isa, Ibrahim (2015) Modeling of image processing algorithms for hardware-software co-simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Isa, Nur Farah Ain (2015) Effect of graphene oxide (GO) in improving the performance of high voltage insulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Isah, Abubakar Danladi (2015) Culture integration and spatial morphology in public housing transformation in northern states of Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ishak, Amir Fuhaira (2015) Production of selenium enriched saccharomyces boulardii in pilot scale bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ishak, Mohamad Shaiful Ashrul (2015) Hasil pembakaran emisi rendah dengan menggunakan bahan api biodiesel berbantukan aliran berpusar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohd. Hafiz (2015) Voltage stability enhancement in distribution networks with distributed generations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Muhamad Safwan (2015) Fourier transform technique for analytical solution of diffusion equation of concentration spherical drops in rotating disc contactor column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ishak, Shukri (2015) The comparison on the milestone and monthly payment of project performance in public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishari, Muhammad Alham (2015) Kepuasan dan kesetiaan pelanggan kajian untuk industri hotel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Iskandar, Norlaila and Mohd Don Basari, Nur Humairah and Jasmi, Kamarul Azmi (2015) Gugatan akidah: mencela para sahabat. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Ismail, Ahmad Ramdan (2015) Solubility of swietenia mahagoni seed in supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Ahmad Zuhdi (2015) Effect of tide on flood modelling and mapping in Kota Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Azizah (2015) The celebrity exposure in different media and their effects on destination awareness and purchase decision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Azizah (2015) Kemampuan pembiayaan perumahan untuk golongan bumiputera. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Azril Khairol (2015) Kemampuan memiliki rumah oleh golongan belia bumiputera (kajian kes : Gelang Patah). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Kamarulafizam (2015) Heart murmur detection and analysis using multipoint auscultation system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ismail, Mohd. Faizu (2015) Project management skills for new engineers in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Natra (2015) PWM PIC16F877A dimming electronic ballast for HPS lamp. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Noor Maizura (2015) Polyethersulfone/cloisite 15A mixed matrx membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Nor Syahidatul Nadiah (2015) Hybrid medium access control using token approach in wireless sensor network for high traffic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Ramli (2015) Recovery of head office overheads due to prolongation of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Siti Saidatul Azween (2015) Soil moisture variation due to grass water uptake in shallow slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Isyaku, Usman Bature (2015) Correlative interferometry for angle of arrival estimation and signal source locating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ithnin, Ahmad Muhsin (2015) Real-time water-in-diesel emulsion fuel production system for diesel electric generator. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

J

Jaafar, Fatimah Amirah (2015) Resistance reduction through air layer formation beneath a vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jaafar, Suraya Hani (2015) Kajian keberkesanan kualiti pangkalan data ukur kadaster berdigit kebangsaan (NDCDB) mengikut perspektif pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Jagarajan, Rehmaashini (2015) A structured critical success factors model for the implementation of green retrofit projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jahangiri, Mohammad (2015) The relationship between facilitative language learning and oral performance among Iranian learners. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jailani, Noor Atiqah (2015) Structure characterization and surface morphology of low sintering temperature synthesized calcium titanate ceramics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jalaluddin, Nur Ayuni (2015) Feasibility study of hybrid system for resident area in Pulau Perhentian Kecil, Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jalil, Noraini (2015) A web-based teleprenatology platform for antenatal care management in remote areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Jamal, Afiqah (2015) Effect of plant growth regulators in plant regeneration of Malaysian upland rice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Jamalruhanordin, Fara Lyana (2015) Arterial hemodynamics in patent ductus arteriosus stenting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Jamaludin, Rosmahaida (2015) Chemometrics and multiblock methods for quantitative structure-activity studies of artemisinin analogues and polychlorinated diphenylethers. PhD thesis, Universiti Teknologi Malaysia, Faculty of science.

Jamar, Adeebah (2015) A study of network characteristics in diffusion-based molecular communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jasmi, Kamarul Azmi (2015) Mahasiswa dan kehidupan menurut perspektif Islam: asas pembangunan mahasiswa (jilid I). Penerbit UTM Press, Skudai, Johor Bahru. ISBN 978-983-52-1040-2

Jasmi, Kamarul Azmi (2015) Mahasiswa dan kehidupan menurut perspektif Islam: penampilan, kesihatan, dan aktiviti sosial (jilid III). Penerbit UTM Press, Skudai, Johor Bahru. ISBN 978-983-52-1042-6

Jasmi, Kamarul Azmi (2015) Mahasiswa dan kehidupan menurut perspektif Islam: pengurusan efektif untuk berjaya (jilid II). Penerbit UTM Press, Skudai, Johor Bahru. ISBN 978-983-52-1041-9

Jasmi, Kamarul Azmi (2015) Mahasiswa dan pembelajaran berkesan. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Pengurusan Efektif untuk Berjaya. Penerbit UTM Press, Skudai, Johor Bahru, pp. 1-24. ISBN 978-983-52-1041-9.

Jasmi, Kamarul Azmi (2015) Mahasiswa dan penulisan kertas kerja akademik. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Pengurusan Efektif untuk Berjaya. Penerbit UTM Press, Skudai, Johor Bahru, pp. 25-41. ISBN 978-983-52-1041-9.

Jasmi, Kamarul Azmi (2015) Perkembangan Pendidikan Islam dan arah tujunya dalam memperkasakan peradaban Melayu Johor. In: Prosiding Persidangan Tamadun Melayu Johor: Johor ke arah pusat tamadun Melayu serantau, 11-13 November 2015, Pusat Konvensyen Antarabangsa Persada Johor, Johor Bahru.

Jasmi, Kamarul Azmi and Ahamed, Azmi Maricar and Mohd. Noor, Jawwal Miqdam (2015) Mahasiswa dan matlamat hidup. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Asas Pembangunan Mahasiswa. Penerbit UTM Press, Skudai, Johor Bahru, pp. 1-24. ISBN 978-983-52-1040-2.

Jasmi, Kamarul Azmi and Ahmad Zawawi, Nurliyana and Md. Saleh @ Masrom, Siti Fauziyani (2015) Students and school learning environment motivate success of Excellent Islamic Education Teachers (EIET). Tinta Artikulasi Membina Ummah (TAMU),, 1 (2). pp. 83-92. ISSN 2289-960X

Jasmi, Kamarul Azmi and Mahamad Remli, Mohd. Imran (2015) Mahasiswa dan aktiviti kesukanan. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Penampilan, Kesihatan, dan Aktiviti Sosial. Penerbit UTM Press, Skudai, Johor Bahru, pp. 45-66. ISBN 978-983-52-1042-6

Jasmi, Kamarul Azmi and Mohd. Pisol, Mohd. Izzuddin (2015) Pemerkasaan Pendidikan Islam dalam cabaran zaman. Persatuan Intelek Muslim Malaysia, Bangi, Selangor. ISBN 978-967-10160-8-4

Jayos, Samsiah and Abd. Ghani, Faizah and Mohd. Tahir, Lokman and Jasmi, Kamarul Azmi and Abdullah Bandar, Nur Fatihah (2015) System support in counseling among Muslim convert clients in Malaysia. Cognitive Sciences And Human Development, 1 (1). pp. 74-81. ISSN 2462-1153

Jeffry, Siti Nur Amiera (2015) Properties of asphaltic concrete AC14 containing coconut shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jehad, Dhafir Giyath (2015) Numerical investigation of turbulent nanofluid flow effect on enhancing heat transfer in straight channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jeman, Mimi Sulastrie (2015) Numerical simulation in foundation due to settlement problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Johar, Siti Sarawati (2015) Kesan pengaruh kecerdasan emosi, personaliti dan estim kendiri ke atas komitmen terhadap organisasi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Johari, Khairiraihanna (2015) Synthesis, characterization and performance of adsorbents for mercury vapor removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Josiah, Kekere Temitope (2015) Ensemble methods in intrusion detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Jumari Porman, (2015) Numerical simulation of vortex combustion for various air-fule configurations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Rohayu (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

K

Kadir, Norasman (2015) Stability analysis of fill slope at Sekolah Menengah Kebangsaan Song no.2's project using SLOPE/W. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kakar, Faridullah (2015) Power quality improvement by dynamic voltage restorer and unified power quality conditioner using fuzzy logic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamaruddin, Nadiah (2015) Electrical signatures and water absorptivity of a new insulation material for high voltage applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamarudin, Rosaniza (2015) Detection of paraquat in calliphorid maggots by capillary electrophoresis for diagnosing fatal poisoning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kandar, Mohd. Za’I (2015) A social network analysis of international tourist movement patterns for green and landscape spaces in Penang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kareem, Hayder Jasim (2015) Modeling and simulation of hybrid system for electricity generation in rural area (microturbine, biodiesel, solar photovoltaic and battery/MTBDSPB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kassim, Nor Akashah (2015) Tahap keberkesanan media interpretasi personal dan grafik di Taman Negara Tanjung Piai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Katimin, Muhammad Farihin (2015) Moderating effects of perceived supports for creativity on the relationship between individual factors and creativity among Malaysian research officers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Katiran, Norshidah (2015) Resource allocation in coordinated multipoint long term evolution – advanced networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khaleghi, Mostafa (2015) Experimental and computational thermal analysis of vortex flame in meso-scale combustor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khamis, Nur Syahidah (2015) Matroid structure of dynamic graph model of evaporation process in a boiler system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khiru Nasir, Nadhira Atiqah (2015) The cytotoxic effect of typhonium flagelliforme and clinacanthus nutans on breast cancer cell line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Khor, Beng Hooi (2015) Chromobacterium violaceum R1-ferricyanide mediated biosensor for determination of biochemical oxygen demand. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Khoshtinat Nikoo, Maryam (2015) Reactant dilution effects and reaction kinetics of methane dry reforming in dielectric barrier discharge reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kiakalaieh, Amin Talebian (2015) Gas phase glycerol dehydration to acrolein over supported silicotungstic acid catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kirmani, Syeda Shabana (2015) The role of employee motivation in the relationship between personality traits and employee job performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Koo, Shi Qi (2015) Absorption energy of layered structures due to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kootiani, Reza Cheraghi (2015) Wellbore pressure prediction after pipe connection operation in underbalanced drilling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kumarasamy, Inbanathan (2015) Tugas-tugas utama pengurusan harta pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Kwok, See Ying (2015) The mediation effect of value on experience and service quality toward satisfaction in Malaysian tourism industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

L

Lagehr, Naglea A. E. (2015) Detection and amplification of putative hydrogenase 3 operon in Citrobacter sp. L17. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lagiman, Norizam (2015) Indikator kesejahteraan perancangan bandar Islam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lau, Pik Suan (2015) Wound healing in diabetic rat by 808 NM laser diode. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lazim, Zulfaqih (2015) Ultimate strength analysis of ships plate due to corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Chia Wui (2015) Finite-difference-time-domain simulation of insulated monopole in brain tumor hyperthermia treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Szue Yann (2015) The application of terrestrial laser scanning and web-based geographical information system for indoor asset management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Leong, Pau Ming (2015) Structural and luminescence properties of europium oxide and dysprosium oxide codoped strontium borophosphate ceramics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Leong, Pei Pei (2015) Production and optimization of indole-3-actic acid by rhodopseudomonas palustris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leow, Ting Qiao (2015) Structural and optical properties of pekovite and maleevite phosphor for white led applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Li, Zheyu (2015) Macroeconomic factors effect on housing price index in China. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liew, Jan Fui (2015) Perceived image of Chinese tourists on Malacca world heritage sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew, Kok Jun (2015) Characterization of extracellular proteases from Pseudomonas sp. 16D4 and Dermacoccus sp. 17D6 isolated from arctic regions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Liew, Siaw Yee (2015) Omega algebra model of clinical waste incineration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Suk Ming (2015) Synthesis of heterocyclic chalcones and their novel pyrazoline derivatives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Tian Fuh (2015) Construction stage analysis of a post-tensioned segmental crosshead. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Ai Ling (2015) The influence of e-participation as antecedent on behavioural intention to use among Sarawak e-filers. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Lim, Jee Wen (2015) Undrained shear strength of overconsolidated cohesive soil using modified rowe cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Li Yee (2015) Physicochemical and microbial profile of oil palm empty fruit bunches compost treated with effective microorgnisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Limpo, Lita (2015) Amalan nilai pancasila dan gaya membuat keputusan dalam birokrat di Sulawesi Selatan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Loo, Khee Hui (2015) Timber clinker as partial replacement of 20mm natural coarse aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loo, Ling Kim (2015) Adaptive online fault detection on network-on-chip based on packet logging mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lotepi, Nor'aini (2015) Metal oxide surge arrester trending and analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Low, Jiun Hor (2015) Isolation, characterization and preparation of spent coffee ground tannin as eco-friendly wood adhesives. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Low, Wen Pei (2015) River treatment using biofilm growth on coconut and oil palm cellulosic fibres. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lwti, Nabeel Katfan (2015) Assessment of disturbance impact of hydraulic jack in pile penetration using artificial transparent clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lye, Jimmy Wei Ping (2015) Adsorptive coagulation-flocculation removal of antibiotics in sewage treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

M

M. Nemer, Tareq H. (2015) Use of estidama rating tool to assess existing building in hot dry climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

M. Razali, Normasliza (2015) EEG-based emotion classification using wavelet based features and support vector machine classifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Magira Tom, Abubakar (2015) Data disaster recovery model for the association of bureaux de change operators of Nigeria, ABCON Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mahamad, Mohammed Nabil (2015) Activated carbon from pineapple waste biomass for the removal of methylene blue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahin, Mohd. Azrul Hisham (2015) Automatic wireless accelerometer monitoring system (AWAM) for slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmoud Farouq, Murtala (2015) Road maintenance management in Kano State: case study at Kano Metropolitan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Yuzi (2015) Social network site appropriation processes based on family types. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mak, Kam Wong (2015) Study of micro pits on billet experimental surface in extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Makhtar, Nooraini (2015) Hybrid intelligent system for demand forecasting in die-casting industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malano, Elfianingsih (2015) The expectation and perception of international student for delivery service quality in International Student Centre (ISC) in public universities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Malek, Muhammad Khairuddin (2015) Bioprocessing development for anaerobic cultivation of probiotic bacteria bifidobacterium longum for high cell mass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Malik, Muhammad Noman (2015) Human values identification and assessment tool development for TQM context. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Mallum, Isa (2015) Flexural performance of steel fiber reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mamat, Nasirah (2015) Optimal placement and sizing of distributed generation unit by loading margin approach for voltage stability enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mamat, Nor Aswani (2015) Affine-based time-scale ultra wideband wireless channel simulator for time-varying communication environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Manap, Norhafizah (2015) The effect of coconut shells on engineering properties of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maniam, Darmadevaindra (2015) Die defect classification using image processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Marjan Bakhtiarinejad, (2015) Numerical study on the influence of various nanofluids on the efficiency of flat-plate solar collectors (FPSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Marni, Nurazmallail (2015) Mahasiswa dan kewajipan diri. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Asas Pembangunan Mahasiswa Jilid I. Penerbit UTM Press, Skudai, Johor Bahru, pp. 25-49. ISBN 978-983-52-1040-2.

Marni, Nurazmallail and Wan Ahmad, Wan Yahaya and Md. Naser, Maziah (2015) Mahasiswa dan gaya penampilan. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Penampilan, Kesihatan, dan Aktiviti Sosial. Penerbit UTM Press, Skudai, Johor Bahru, pp. 1-20. ISBN 978-983-52-1042-6 (Submitted)

Masnan, Mohamad Nazri (2015) Best practice for offshore platform deformation survey using global navigation satellite system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Masoud Eid, Ahmad Mustafa (2015) Improvement of anti-inflammation of swietenia macrophylla self nanoemulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Masri, Mohd. Irsyam Noorfawana (2015) Flood mapping for Sungai Bunus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Masrin, Saiyidatul Mahirah and Hashim, Faezah and Mustari, Mohd. Ismail (2015) Gugatan akidah: tidak mengakui nikmat Allah SWT. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Mas’Ood, Najlaa Nazihah (2015) Model development of estimating oil discharge for sustainable green port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Kiah, Missjuliana (2015) Six sigma for scrap cost reduction in remanufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Lazim, Noor Hanis Izzuddin (2015) System identification model and predictive functional control of an electro-hydraulic actuator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Rashid, Norul Huda (2015) Hubungan antara ganjaran dan etika kerja Islam dengan komitmen dalam kalangan pekerja di Jabatan Pembangunan Persekutuan Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mat Rosid, Salmiah Jamal (2015) Design and optimization of lanthanide oxides based catalysts for carbon dioxide methanation. PhD thesis, Universiti Teknologi Malaysia, Faculty of science.

Mat Zin, Mohd. Hayyi (2015) Forest encroachment mapping in Cameron Highlands, using cadastral parcel and remote sensing datasets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Maya Sarah, Maya Sarah (2015) Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Maziar, Azimzadeh Irani (2015) Effect of knowledge sharing on organizational performance through customer satisfaction in the Malaysian banking industry. PhD thesis, Universiti Teknologi Malaysia,International Business School.

Md. Abas, Mohd. Hafizullah (2015) Haiwan dalam Al-Quran menurut tafsir ilmi kajian terhadap lebah semut dan labah-labah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Md. Noor, Mohd. Amirul Hakim (2015) Evaluation of compactive effort and time available for compaction on hot mix asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Noor, Norazlin (2015) Anti-fungal activity of persicaria minor extracts toward malassezia and aspergillus niger. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Md. Said, Mohd. Sollehudin (2015) Human head phantom material characterization for microwave imaging system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Salleh, Mohammad Annuar (2015) Maintenance management assessment in a local manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zahri, Azura (2015) Flood mapping using geographic information system (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Zaini, Siti Ernee (2015) Crowd detection from aerial images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Memon, Abdulmanan (2015) Modelling single grounding electrode using COMSOL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Memon, Mehran (2015) Wireless power transfer in near-field communication using a current-controlled multi loops with a loaded capacitance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Merapan, Kirubaharan (2015) Glycerine pitch from glycerine concentration process as alternative fuel for boiler operations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Meskaran, Fatemeh (2015) The effect of perceived trust, perceived security and attitude on online purchase intention in Malaysia public universities. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Mirabolghasemi, Marva (2015) A model for enhancing performance in using social network sites for breast cancer patients. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mirnazari, Javad (2015) Evaluation of different techniques for generating landslide susceptibility map. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Miron, Nurfatin Aqeela (2015) Utilization of coconut shell as fine aggregate in asphaltic concrete AC14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misman, Nor’Aqilah (2015) Integration of median filter and oriented field estimation for fingerprint identification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamad, Abdul Kadir and Yusoff, Kamaruzaman and Saat, Ishak (2015) Peranan dan sumbangan Haji Ismail dalam memperkukuhkan pendidikan agama Negeri Johor Darul Ta'zim 1929-1937 dan 1949-1960. In: Seminar Koleksi Johor 2015, 16 February, 2015, Johor Bahru, Johor.

Mohamad, Ahmad Fahrulrazie (2015) Identification of attack/misuse with email header forensic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamad, Ahmad Marzuki and Zahar, Ahmad Razlan and Nasir, Mohd. Kamal (2015) Mahasiswa dan pengurusan masa. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Pengurusan Efektif untuk Berjaya Jilid II. Penerbit UTM Press, Skudai, Johor Bahru, pp. 43-57. ISBN 978-983-52-1041-9 (Submitted)

Mohamad, Izni Izzati (2015) Landfill site suitability using geographic information system and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Hisham, Mohamad Aliff Zaquan (2015) Faktor dan piawaian dalam penyediaan laporan kajian kemungkinan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad Ikhwan Kori, (2015) Hemodynamic effect of Patent Ductus Asteriosus (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Noh, Izyan Nadzirah (2015) Women empowerment in organizing homestay program case study: Homestay Sinaran Baru, Senai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Nor, Alif Syarafi (2015) Planar electromagnetic sensors array for nitrate and sulphate detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Sahini, Mohd. Nawawi (2015) A study and analysis of cooking oil quality determiner based on planar electromagnetic sensor array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Sobri, Sobrina (2015) Feasibility study implementation of a micro-grid in the hotel building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed, Ashara Banu (2015) Enhanced framework for alert processing using clustering approach based on artificial immune system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamed, Gamal Maged (2015) Behavior of self-compacting concrete incorporating recycle materials at high temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Mohd. Firdaus (2015) System identification and intelligent control of automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Noah, Norul Fatiha (2015) Emulsion liquid membrane extraction of palladium from simulated electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Ramlee, Mohd. Fazril (2015) Enhancement of quality of working life among site officers at Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamedali Abdalla, Ahmed Abdalla (2015) Dataset generation and network intrusion detection based on flow-level information. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad, Ahmad Faiz (2015) Numerical simulation of wind pressure distribution in urban buildings of random staggered arrays. Masters thesis, Malaysia-Japan International Institute of Technology.

Mohammad Diab, Nateg (2015) Microstructure and mechanical properties of Al-Alloy with rare earth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Ghanbari, Mohammad Ghanbari (2015) Exploring the potential of nanofillers for advanced thin film nanocomposite forward osmosis membranes fabrication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Mohammad Sipellizan, Salina (2015) Mengenalpasti pilihan cenderamata oleh pelancong antarabangsa di Melaka Bandaraya Bersejarah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammad Yazid, Amirul Akmal (2015) Electrical discharge machining of hybrid material using copper electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Na’Aim, Mohd. Zahirudin (2015) Influence of real-time kinematic network in cadastral surveying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohammed Salih, Haval (2015) Residential housing development in Kurdistan region government of Iraqi federal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ali, Mohd. Hafiz (2015) Study on the influence of head of project team role throughout JKR project life cycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Alias, Adib Zulhilmi (2015) Pressure drop prediction for stratified oil-water flow in horizontal pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Amin, Nor Amaiza (2015) Accelerated aqueous extraction and phytochemicals screening of eurycoma longifolia (Tongkat Ali) extract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Azli, Anis Athirah (2015) Computational study of turbulent unconfined swirl flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Azol, Mas Elyza (2015) Characterisation of sharp edges Schottky contacts with nanostructure film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Badroldin, Mohd. Khairul Anas (2015) Payment culture in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Bahari, Zaili (2015) Dynamics characteristics and energy absorption of fibre-metal-laminate (FML) thin-walled tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Faizal Ali Akhbar, (2015) Enhancement of heat transfer coefficient in an automobile radiator by using nanocoolant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Fauzi, Mohd. Husaini (2015) Automatic application programming interface for multi hop wireless fidelity wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Fauzi, Nurihan (2015) Strength characterisation of shale using Mohr-Coulomb and Hoek-Brown criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ghazali, Norizzawati (2015) Gallium nitride nanowire by nitridation of electrochemically grown gallium oxide on silicon. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Mohd. Hanafi, Mohd. Zainolarifin (2015) Optimal heat sink based on heat transfer model and particle swarm optimization method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Hashim, Mohamad Hasruzairin (2015) ARM processor emulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Idris, Nurmawaddah (2015) Professional personality profiling for purpose of project success in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ismail, Nurul Izzati (2015) Anti-microbial and anti-inflammatory activities of crude and acidified fraction of selected Malaysian honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Jelani, Azliza (2015) Frequency estimator using artificial neural network for electrical power system dynamics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Mokhtar, Nadzirah (2015) Membrane distillation for textile wastewater treatment using polyvinylidene fluoride cloisite 15A hollow fiber composite membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd. Najib, Nazarin Ezzaty (2015) Forest cover change in Peninsular Malaysia using satellite remote sensing data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Naqiuddin Mohd. Salleh, (2015) Study on the performance of envo diesel in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Noor, Ahmad Firdaus and Jasmi, Kamarul Azmi and A. Shukor, Khairunnisa (2015) Elemen pengetahuan pensyarah cemerlang Unit Pendidikan Islam dan Moral di Politeknik Premier: satu kajian rintis. The Online Journal of Islamic Education, 3 (1). pp. 13-21. ISSN 2289-3016

Mohd. Noor, Hafidah (2015) A new streamer discharge chamber for nox removal from heavy vehicles: a simulation study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Nor, Nur Umisyuhada (2015) Photocatalytic oxidation of phenol, cyclohexanol and hexanol by titania dispersed on mesoporous silica MCM-41. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Pabli, Fathin Asila (2015) Modeling of electric double layer capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Pauzi, Nurul Noraziemah (2015) Measurement of building energy intensity towards potential of building retrofit for M50, Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Razak, Nurhafizatul Haswani (2015) Penglibatan sektor awam dan swasta dalam pengurusan sisa pepejal melalui pendekatan pengurangan, guna semula dan kitar semula (3R). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Ridza, Badrul Hisham (2015) Influencing factors in non-landed residential property facilities for management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Room, Mohd. Hafis (2015) Pemetaan sungai berskala besar menggunakan fotogrametri jarak dekat dan sistem pesawat udara tanpa pemandu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Saad, Norhashimah (2015) Automated brain lesion classification method for diffusion-weighted magnetic resonance images. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Said, Kamilah (2015) Occupational noise exposure amongst road construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Saini, Wardati and Mohd. Yatim, Noramizah and Mohd. Puaad, Nurin Safia and Safar, Jimain @ Ajmain (2015) Gugatan akidah: hal selain Allah dalam hukum syarak. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor,.

Mohd. Salleh, ‘Ali Syari’Ati (2015) Simulation of the ankle foot orthoses with prevention design for pronation and supination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Shafie, Bani Hidayat and Fatmi Talib, Nor Hayati (2015) Pengimarahan surau dalam pengajaran dan pembelajaran Pendidikan Islam. In: Pemerkasaan Pendidikan Islam dalam Cabaran Zaman. Persatuan Intelek Muslim Malaysia, Kuala Lumpur, pp. 55-70. ISBN 978-967-10160-55-70

Mohd. Shamsulizan Mustapa, (2015) Design and development of a flow forming machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sharifuddin, Roqiyah Nur (2015) Mutual termination agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Sharip, Mohd. Ridhuan (2015) Electric field distribution in nanocomposites containing one-dimensional nanofiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Sith, Nurain (2015) The effect of oversized lane width and lane shoulder on heavy vehicle parking on residential streets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Tahir, Mohd. Rafizal (2015) Evaluating the control of vehicles confiscation and forfeiture by Royal Malaysian Customs, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Taib, Nur Athirah (2015) Q-switching of neodymium yttrium aluminium garnet laser via active and passive techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yamin, Ahmad Hafizal (2015) Semiactive suspension system using sky hook controller with particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunos, Mohammad Harith (2015) The prevailing practice in deciding the practical completion of construction work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yunos, Mohd. Amerul Akmal and Noor Azean, Atan and Norazrena, Abu Samah and Mohd. Nihra Haruzuan, Mohd. Said and Hasnah, Mohamed (2015) Scientific performance profile based on preschool’s apps-aided basic scientific process skills proficiency patterns. In: 5th International Conference on e-Learning 2015 (Stellar-ICeL 2015), 26th-28th May 2015, Hyatt Regency Kinabalu, Sabah.

Mohd. Yunus, Azrul Azim (2015) Sequences and cubes of finite vertices of fuzzy topograpffic topological mapping. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Zaki, Wan Ahmad Faiz (2015) The influence of success factors toward software development project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohsenizadeh, Saeid (2015) Impact characteristic and energy absorption of auxetic foam-filled square tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moqbel Ali, Fahmi Fadhl (2015) The mediating effect of corporate social responsibility and spirituality on balanced scorecard in Yemen’s private universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Morni, Azy Yanti (2015) Walkability as key strategy in improving weld quay legibility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Morsin, Mardiah (2015) Development of a relay using USRP platform for indoor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mortaza, Ahmad (2015) CFD modeling of flow induced vibration mechanism in sea water piping on a regasification terminal platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mousa, Layth Fouad (2015) Partial discharge characteristics on palm-based for transformer oil application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Movahed, Zohreh (2015) A new analytical method for characterization of fractured reservoirs. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mt. Radzi, Rosmariati (2015) Tourists’ preferences and satisfaction towards Mersing as a gateway to Johor islands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muda, Nor Wajihan (2015) One step activation using potassium hydroxide on prepared activated carbon for base transesterification reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muda, Nur Hanismahiza (2015) Determination of nutrients and metals content in liquid generated from composted food waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mughal, Moazzam Ali (2015) Rheological properties of styrene-butadiene-rubber modified bitumen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhamad, Nor Izzati (2015) The effect of flow experience and organizational perspective among academicians in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Muhammad, Abubakar (2015) Photocatalytic degradation of methyl orange using TiO2 impregnated activated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muhammad, Bashir Bala (2015) Modeling and vibration control of piezoelectric actuator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhammad Salim, Muhammad Arfin (2015) Discourses of tourism in the official tourism websites in Southeast Asia. PhD thesis, Universiti Teknologi Malaysia, Language Academy.

Muhammd, Faiz (2015) Optimal design of passive power filters using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhd. Radzi, Muhd. Abu Bakar (2015) Development of electrical discharge machining power generator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhd. Yusof, Muhd. Firdaus (2015) Moving ship detection for unmanned aerial vehicle using atom processor for camera vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mukhtar, Norazimah (2015) Peranan ciri-ciri destinasi dan kepuasan pelancong kepada lawatan ulangan ke Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muneer, Saqib (2015) An interaction between financial practices and firm performance with moderating effect of agency cost in Pakistani corporate sector. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Munir, Yasin (2015) Predictors and outcome of organizational cynicism and themoderated mediating effect of perceived organizational support among nurses in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Muniyandi, Shantha Kumari (2015) Composite material production of nonmetallic printed circuit board waste with recycled high density polyethylene. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Murugiah, Khovarthen (2015) Chronic kidney failure data management system with automatic classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Musa, Mohammed Salisu (2015) Synthesis and application of microporous carbon spheres for solid phase membrane tip extraction of nitrosamines from water samples. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Musa, Mohd. Roszaimy (2015) Awareness and understanding of government total asset management implementation strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mushtaq, Faisal (2015) Microwave-assisted pyrolysis and co-pyrolysis of coal and oil palm shell with coconut shell activated carbon as microwave absorber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustafa, Abu Bakr Mohamed Ali (2015) Millimeter-wave grid array antenna for 5G mobile communication networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mustafar, Izni (2015) Modeling, simulation and design of an improved high power factor bridgeless sepic converter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mustari, Mohd. Ismail and Balakrishnan, Prabakar and Sundar, Sri Theran (2015) Mahasiswa dan kegiatan sosial. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Penampilan, Kesihatan, dan Aktiviti Sosial. Penerbit UTM Press, Skudai, Johor Bahru, pp. 67-80. ISBN 9789835210426 (Submitted)

Muthoovaloo, Navitra (2015) Characterization and antibacterial activity of hexadecyltrimethylammonium modified silver kaolinite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mutia, Reiza (2015) Production and characterisation of cocoa butter equivalent from formulated hard palm oil midfraction and canola oil blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

N

Nabeel Najm Bahlol, (2015) Effect post treatment parameters on corrosion resistance of Ti-13Nb- 13Zr coated with hydroxyapatite via electrophoretic deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nading, Nadiana (2015) Domestic tourist’s perception on Sarawak ethnic native’s food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nadzif, Nor Farina (2015) Simulation of LNAPL migration and remedition at a petroleum refinery site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naghshbandi, Reza (2015) Mitigation methods of progressive collapse for a 10-story reinforced concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Narayanasamy, Menaka (2015) Computational approaches for optimal design of tailor made biofuel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nasir, Shah (2015) A comparitive study on immobilised mycelium and spores of p. chyrisosporium in pva-alginate-sulfate beads for textile dyes effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nasseri, Mahsa (2015) Human epithelial type 2 cell classification based on concatenated features and machine learning algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nelson, Okello (2015) Modeling of landslide occurrence in the hilly areas of Bududa District, Eastern Uganda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Geak Kun (2015) Modelling and active vibration control of flexible manipulator structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Kent Hoo (2015) Investigation of excitation coils configuration and particle swarm optimization of coil’s diameter in magnetic nanoparticles imaging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ng, Sin Yi (2015) Application of similarity solution on gaseous pollutant problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Tze Jia (2015) Classification of abnormal crowd behavior using image processing and state machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ngo, Wai Loon (2015) Stream processor architecture – streaming memory system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ngu, Kek Siang (2015) Carbon nanotube field-effect transistor for a low noise amplifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nik Abd. Aziz, Nik Norashikin (2015) Inherent occupational health assessment for chemical batch processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nik Abdullah, Nik Abdul Hafiz (2015) Application of good faith as necessary limits in exercising the termination for convenience clause. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nizam, Yoosuf (2015) Development of a portable Muslim prayer time table clock. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nizar, Nurfarahin (2015) Structural and luminescence properties of barium orthosilicate doped with europium and samarium ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Noor, Shaista (2015) Commercialisation of academic research in higher education institutions of Pakistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Nooradzhar, Fathin Shahiera (2015) Faktor kejayaan kritikal (CSF) bagi pelaksanaan sistem pengurusan kualiti (QMS) di organisasi pengurusan fasiliti (FM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Nor Hassan, Abdul Hafiz (2015) Development and analysis of pulse detonation engine (PDE) with fuel-air premixed intake system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nunoo, Solomon (2015) Adaptive channel estimation for sparse ultra wideband systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

O

Oh, Eng Wei (2015) Speed enhancement on a matrix inversion hardware architecture based on Gauss-Jordan Elimination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Okpa, Obaji Nkem (2015) The impact of government policy on the relationship between critical success factors and incubation contributions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Olyaiy, Mahmood (2015) Development of process-based entropy measurement framework for organizations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Omar, Ahmad Sahar (2015) Development of colour-mark sensor-based calibration system for timing devices with seven-segment liquid-crystal-display. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Omar, Mohd. Saifulizan (2015) Feasibility study of hybrid PV/diesel energy system at Institut Kemahiran Mara Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Omar, Nur Afifah (2015) Detection of cross-country fault on distance protection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Omar Khalaf, Omar Tahseen (2015) Enhancement of voltage stability and power losses for distribution system with distributed generation using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ong, Chi Siang (2015) Submerged membrane photocatalytic reactor using polyvinylidene fluoride-polyvinylpyrrolidonetitanium dioxide for oily wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ong, Chin Tong (2015) Block-based neural network mapping on graphics processor unit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ong, Leng Hui (2015) Production, partial purification and characterization of amylase from sphingomonas sp. isolated from artic soil Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ong, Wen Jian (2015) A graphics processing unit based network intrusion detection system with bloom filter pattern matching algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ooi, Zing Yi (2015) Recovery of kraft lignin from pulping wastewater using emulsion liquid membrane process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Mohammad Faizi (2015) Fault modeling of chirality variation for carbon nanotube field effect transistor and its effect on circuits performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Mohd. Hakimi (2015) Two dimensional direct current resistivity mapping for subsurface investigation using computational intlligence techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Nazirah (2015) Specific absorption rate in the presence of conductive metallic objects with close proximity radiating source. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Nur Fatehah (2015) Spectrum sensing prototype using software using software defined radio USRP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Nurul Izzaida (2015) The impact of value management on project success in felda projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nurul Sakinah (2015) Removal of dyes by silica nanoparticles with immobilized laccase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Siti Rabe’Ah (2015) Modelling of external corrosion growth of steel pipeline in soil for tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

P

P. Rajadran, Nisha (2015) Callus induction and development of suspension cell culture of Malaysian upland rice cultivar Panderas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Pandian, Santha (2015) Computer aided approach for occupationally healthier chemical assessment and selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Pang, Tuck Seng (2015) Development of a modular photovoltaic maximum power point tracking converter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Pang, Xie Guan (2015) Structural and luminescence properties of antimony, lead, bismuth zinc borophosphate glasses doped iron and titanium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Panot, Hiasan and Mohd. Rahman, Ahmad Farhan and Zainal Abidin, Muhammad Zainal Fitri and Mohamed, Ahmad Kilani (2015) Gugatan akidah: benci al-Quran. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Parnon, Afif Aimaduddin (2015) Productivity improvements using lean practices at Japanese electrical and electronics manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Parvizpour, Sepideh (2015) Cold adaptations study of glycosyl hydrolase enzymes via computational methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

R

R. Anthony, Santhanamary (2015) Evaluating the development of leadership self-efficacy among the aspiring school leaders. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Rad, Mozafar Shokri (2015) Auxetic structures for energy absorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahibulsadri, Rasheila (2015) On the establishment of the lowest astronomical tide for marine parcel commencement in peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rahim, Falah Jabar (2015) Object tracking from unmanned aerial vehicle using Kanade-Lucas-Tomasi tracker and speeded up robust features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahimin, Nornikman (2015) Earhthing performance of HV/MV substation and its effect on nearby structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahman, Md. Habibur (2015) Vibrating nanoneedle and lab-on-chip microfluidics system for single cell mechanics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahman, Mohammad Mahbur (2015) Deformation behaviour of self-compacting concrete containing high volume palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, Mohammad Obaidur (2015) Failure of Ohm’s law and circuit design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rai, Nor Akmal (2015) Analysis and modelling of ultracapacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Raja Mohd. Yazit, Raja Nur Syaheeza (2015) 'Third place' environment in residential school design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Raja Shoib, Raja Shahrom Nizam Shah (2015) Rock shaft resistance of bored piles socketed into decomposed Malaysia granite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rakidin, Faridah (2015) Safety improvement on arm forces construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Liyana (2015) Optimal composite nonlinear feedback control with multi objective algorithms for active front steering system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ramli, Nur Aainaa Syahirah (2015) Renewable levulinic acid production catalyzed by iron modified by zeolite and functionalized ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ramli, Raiha Azene (2015) Assessing loss and expenses claim by prolongation cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rashid, Wirya Najm (2015) Perceived leadership styles, entrepreneuiral orientation and commercialization of university research. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Rashid Mesbah, (2015) Software dynamic pricing by an optimization deterministic model with presence of piracy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rasid, Zawani Amirah (2015) Application of scheduling techniques on a split air conditioner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rasli, Fateen Nabilla (2015) Site suitability analysis of parks in Iskandar Malaysia using GIS and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rawi, Nor Hayati (2015) Flood flow reduction via optimization of outlet control structure at Setapak Jaya pond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razak, Arrauzah (2015) Pattern reconfigurable antenna for radar applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Razak, Nor Farhah (2015) Design and characterization of narrow linewidth fiber laser for wireless communication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Razali, Ili Rabihah (2015) Development of a continuous microwave reactor for the production of zinc oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Razmara, Pegah (2015) Multi-round divisible real-time scheduling algorithm on multiprocessor platforms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Rezaei, Ghasem (2015) Relationship between culture of excellence and organizational performance with knowledge sharing as mediating role. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rezaei, Seyedeh Vahideh (2015) Ranking multiple intelligence of people with epilepsy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ripin, Erlina (2015) Smart power saver using PID control based on PLC application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rohaizad, Nor Aizal Akmal (2015) Keberkesanan modul pengajaran dan pembelajaran dalam perkembangan kecerdasan emosi murid-murid prasekolah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Rohmad (Rahmad), Siti Haniah (2015) Garis panduan dan etika e-Dagang bagi produk fizikal menurut perspektif syariah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Romli, Hajaratul Azila (2015) Delay in settlement of final account. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Roozbahani, Fatemeh (2015) Design and development of an electrospun nanofiber using electrospinning technique for tissue engineering application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Roslan, Siti Fairuz (2015) Multiple input multiple output dielectric resonator antenna for long term evolution applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rosli, Rashidah (2015) Optimal heat transfer of heat sink design based on electronic package thermal distribution using COMSOL package software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rosli, Ruzaini (2015) Parameter identification for fault detection of power transformer using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Roustasekehravani, Alireza (2015) Trust, commitment and satisfaction in the relationship between brand loyalty and satisfaction in the mobile phone industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Rozbeh, Rokhsareh (2015) Analysis of aquatic worms in flocculated digested sludge and extraction of extracellular polymeric substances in wastewater treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ruslan, Nur Fathin (2015) Evaluation of Acalypha indica extracts for antioxidant and antibacterial activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Rzooki, Mustafa Ghanim (2015) Design and development of MIMO antenna for point-to-point application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

S

Sabir, Mohammed Nawzad (2015) The relationship between entrepreneurship characteristics and attitude towards knowledge commercialization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Sabirin, Muhammad Rushidi (2015) Development of cooperative relay using universal software radio peripheral. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sabran, Nurul Husna (2015) Synthesis and luminescent properties of bimetallic gold(I) and silver(I) pyrazolate complexes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sabri, Muataz Watheq Sabri (2015) Wideband coupler for butler matrix antenna beamforming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sabri, Shaikhah (2015) Conch strombus as indicator of metal contaminations in Southern and Eastern Johor waters. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadegh, Omidreza (2015) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeli, Salina (2015) The conceptual model of life cycle costing automation on green building energy efficient criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadi, Mohammadali Kazerooni (2015) A hybrid model for assessing the quality performance of demolition contractors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadiq, Misbah (2015) The effects of influential behavioural factors on investors’ decision making in stock market of Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Saeed, Khurram (2015) Evaluating the renewable energy sources in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safar, Ajmain @ Jimaain and Wan Mazelan, Wan Mohd. Hafeez and Anuar, Mohamad Fitry (2015) Mahasiswa dan pencarian pasangan hidup. In: Mahasiswa dan Kehidupan Menurut Perspektif Islam: Asas Pembangunan Mahasiswa Jilid I. Penerbit UTM Press, Skudai, Johor Bahru, pp. 75-87. ISBN 978-983-52-1040-2 (Submitted)

Saganuwan, Mohammed Umar (2015) Integrating technostress creators and inhibitors in using accounting information system to improve job satisfaction and task performance. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Saharin, Nurul Syazlin (2015) Dosimetric properties of AL2O3:C, Mg exposed to external cobalt-60 gamma irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sahib, Thaeer Mueen (2015) Application of advanced microprocessor in modern agriculture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Said Dawaud, Raghda Saifeddin (2015) Optical and thermoluminescence properties of samarium or dysprosium doped lithium borate glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Saidin, Aminuddin (2015) Claims for additional preliminaries costs due to project prolongation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sainee, Norazean (2015) Issues associates with communicating the architect notice by means of e-mail under PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sajjadi, Seyed Mahdi (2015) Multivariate optimization of highway alignment using multi-criteria evaluation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salau, Rasaq Bolakale (2015) Profiling of mineral contents of typical Malaysian muslim foods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Salehuddin, Siti Maizatul Farhain (2015) Characterization of polymethyl methacrylate / feather fiber / montmorillonite composites for dental post application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Salim, Kalbin (2015) Pengajaran matematik berasaskan animasi untuk meningkatkan kefahaman pelajar pada topik dimensi 3 di sekolah menengah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Saliman, Fadzleen Norsyahira (2015) Pelaksanaan sistem pengurusan kualiti di dalam projek pembinaan (PQMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Salimi, Behnam (2015) Time difference of arrival-based three-station lightning locating system in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salleh, Mohd. Shahril (2015) All optical packet routing time wavelength division multiplexing passive optical network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Samidi, Zuryatie (2015) Organizational justice perception as predictor of job satisfaction and organization commitment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Samsubaha, Muhammad Fauzi (2015) Study on the performance of biodiesel blend Jathropa oil in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samsudin, Mohd. Ali and Haniza, Noor Hasyimah and Abdul Talib, Corrienna and Mhd. Ibrahim, Hayani Marlia (2015) The relationship between multiple intelligences with preferred science teaching and science process skills. Journal of Education and Learning, 9 (1). pp. 53-60.

Samsudin, Suhana (2015) Kesan persekitaran fizikal pejabat terhadap stres di tempat kerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Samsudin, Suraya (2015) Rooftop mapping and information system for rainwater harvesting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sanusi, Intan Safina (2015) Termination procedures of projects by the public works department (PWD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sapiaa Md. Nordin, Nik Abdul Hadi (2015) Development of asymmetric polysulfone and zeolitic imidazole framework 8 mixed matrix membrane for carbon dioxide and methane separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Saputri, Reny (2015) Evaluation of rain cell models using Indonesian meteorological radar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sarbalaei, Raheleh Hosseinian (2015) Detection of hydrocarbon level in distilled water using laser induced acoustic techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sarvarzadeh, Seyed Koorosh (2015) Public perspective as a framework to manage urban heritage in the city of Shiraz, Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sea, Lillian Shun Yi (2015) In silico analysis and truncation studies of the c terminal alpha amylase from anoxybacillus species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Selamat, Nur Zalina (2015) Isothermal crystallization study and mechanical properties of polypropylene/polystyrene/styrene-ethylenebutadiene- styrene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shaaban Binsilm, Salma Abdullah (2015) Integrated nanoneedle-microfluidic system for single cell intracellular temperature measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaf'i, Herul Azrul (2015) Assessment of onshore wind energy potential in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shafei, Dianay Shafina (2015) Characterization of fiber optic sensor for liquid refractive index monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Shaffie, Siti Munirah (2015) High resolution digital elevation model generation by semi global matching approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Shah Yahya, Muhamad Idzmir and Basiron, Bushrah (2015) Gugatan akidah: mentaati selain Allah. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor,.

Shahami, Nurhidayu (2015) Discrimination of different type of meats using laser induced breakdown spectroscopy and chemometric techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shaharin, Mohd. Shafiq (2015) Alloying of aluminium surface with Q-switched Nd:YAG laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Shahid, Pezhman (2015) Estimating the environmental impacts of carbon emissions from fuel consumption during construction activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahraki, Shahrokh (2015) Workforce fatigue model and its relationship with workforce productivity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shahroom, Hamizah (2015) Improvement on system and components of a rotating electric field mill for atmospheric electric field measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shanmugam, Rames Kumar (2015) Reliability of safety performance indicator: compliance and effectiveness of safety programs in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shanshool, Basil Jabir (2015) Antenna array (design at 28 GHz for 5G mobile network). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shapiai, Mohd. Faiz (2015) Minimizing conflicts during construction stage by using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shariff, Siti Suraya (2015) Keperluan latihan berasaskan kompetensi kakitangan barisan hadapan hotel bajet, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Sharifi, Mahdi (2015) Collaborative-based decision making for web service composition using service level agreement negotiation and crowdsourcing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Shehu, Idris (2015) Bioprospecting for culturable psychrotrophic bacteria with extracellular hydrolytic enzymes activity from arctic lake sediments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Shika, Suleiman Aliyu (2015) Post occupancy evaluation for sustainability assessment framework of retrofitting commercial office building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Shikh Zadeh, Khadija Morad (2015) Tensile, thermal and flammability properties of date palm fiber filled recycled ternary blends and composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shittu, Umar (2015) Statistical analysis of human tuberculosis microarray gene expression data in the bioconductor R package. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Shukur, Osamah Basheer (2015) Artificial neural network and kalman filter approaches based on arima for daily wind speed forecasting. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shumran, Alshammari Fahad (2015) Fuzzy sliding mode controller for cascaded multilevel inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Siddiqui, Zeeshan (2015) Cloud computing three-factor user authentication framework and protocols for telecare medical information system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sidek, Nor Khairunnisa (2015) Efficiency optimization of an induction machine using constant optimal flux control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sim, Wan Jie (2015) The theoretical development of opacity entrepreneurship in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Siow, Gyen Win (2015) Purpose and satisfaction of foreign participants in Malaysia my second home programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Siow, Gyen Win (2015) Purpose and satisfaction of foreign participants in Malaysia my second home programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Sirkunan, Jeevan (2015) Configurable version management hardware transactional memory for embedded multiprocessor field-programmable gate array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sivaraj, Pushpalatha (2015) Total phenolic content, antioxidant and cytotoxic activities of citrus hystrix leaf extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sobhanmanesh, Ali (2015) Geometrical effect on the behaviour of embankment on soft ground. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sow, Ling Ling (2015) Social sustainability of urban high-rise community. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Soysa, Ranga Dayan (2015) Local community perspective of tourism in world heritage sites, case study of Galle Fort, Sri Lanka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Subri, Siti Sunaidah Sukma (2015) A frequency controller using fuzzy in isolated microgrid system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sudar, Noorazliza (2015) Forensic investigation using ground penetrating radar (GPR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Suhaimi, Aminuddin (2015) Inclined link as shear reinforcement in reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhiri, Farahdatul Sahuda (2015) Thermodynamic cycle analysis of Pulse Detonation Engine (PDE) by biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Muhammad Irfan and Nasaruddin, Muhammad Aminuddin and Mohamed, Ahmad Marzuki (2015) Gugatan akidah: menghalalkan yang haram. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Sulaiman, Nabila (2015) CFD study on aortic cannula (flow characteristics). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Nur Nadira (2015) Adsorption and photocatalytic removal of dimethylarsenic acid using titania and zinc oxide thiol functionalized ZSM-5 zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sulaiman, Nur Sabrina (2015) Three-dimensional model database for space utilization and planning using terrestrial laser scanner data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sulaiman, Nurul Hidayah and Kamaruddin, Nor Kamilah and Jasmi, Kamarul Azmi (2015) Gugatan akidah: mengingkari dan mencela Rasulullah. In: Seminar Pemantapan Akidah 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Sulaiman, Siti Zubaidah (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Suleiman, Abubakar Abdullkareem (2015) Performance of dielectric properties due to the presence of moisture in vegetable insulation oils and kraft paper immersed in the oils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Suliman, Muhammad Qutaibah and Muhammad Shah, Muhammad Inamul Hassan and Mohd. Nor, Sulaiman Shakib (2015) Gugatan akidah: reda dengan kekafiran. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Suliman T., Alatawi Salem (2015) A conformance measurement model for quality assurance standard in e-learning: a case study in University Of Tabuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sultan, Ahmad Rizal (2015) Skim kegagalan bumi unit penjana-pengubah menggunakan komponen simetri dan jelmaan wavelet-rangkaian neural buatan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sun, Zhendong (2015) Critical requirements of integrated quality management system for project manager in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Suradi, Nur Liyana (2015) Preparation and characterisation of kenaf bast fibre reinforced recycled polypropylene/recycled polyamide 6 composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Surendran Pillay, S. Sadish Kumar (2015) Biogas generation from palm oleochemical effluent for steam production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syed Salim, Syed Najib (2015) Control of a pneumatic actuator system using enhanced nonlinear proportional integral derivative controller algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Syed Yusoff, Sharifah Izyani (2015) Deformation studies on slope area using a digital close range photogrammetry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

T

Taher, Taher Yaseen (2015) Economic aspects of weight saving in the design of braced steel frames using BS5950 and EC3. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Chee Wei (2015) Network-on-chip floorplanning and application mapping using cross-entropy method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Choy Soon (2015) Effect of fines content and plasticity on liquefaction susceptibility of sand matrix soils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Kwon Chong (2015) Porosity architecture in ecological design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, Lay Yen (2015) A study of generation Y travel behaviour in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, Sie Ting (2015) Structural optimisation approach and indicators for integrated municipal solid waste management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Tze Ho (2015) Remote dynamically reconfigurable network processing middlebox. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Wei Seong (2015) Assessment of office building energy efficiency using green building index and leadership in energy and environmental design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tang, Hing Kwong (2015) High strength green concrete by using biomass aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tarmizi, Nurul Izzati (2015) Pelarasan garis panduan dalam prosedur penyerahan lombong kuari. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Teh, Bor Tsong (2015) The application of industrial symbiosis transforming Pasir Gudang towards green industrial park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teh, Khean Siang (2015) Simulation of brick masonry wall behaviour under cyclic lateral loading using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teh, Zhi Huan (2015) Performance prediction of prefabricated vertical drain in soft soil using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teing, Chai Yoon (2015) Comparison of soil index properties value for different pre-drying conditions on clayey soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tenku Izham, Tenku Nur Shahrul Izami (2015) Factors influencing the project success from the contractors' perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teo, Chee Loong (2015) New microwave based transesterlfication techniques for biodiesel production from cultivated microalgae. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Teo, Hong Yap (2015) Hardware/software system-on-chip co-verification platform based on logic-based environment for application programming interfacing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Thian Lim, Gary Soh (2015) Transformer performance model under power quality environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tie, Siang Fui (2015) Energy management of multiple sources for electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ting, Teo Ming (2015) Preparation and characterization of radiation grafted fibrous adsorbent containing N-methyl-D-glucamine for boron removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

U

Ugochukwu, Ijeomah Geoffrey (2015) High field transport in carbon nanotube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ul Haq, Mohammad Asif (2015) Improving energy saving evaluation in lighting using daylight utilization with area segregation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ullah Khan, Hidayat (2015) Generalised interval-valued fuzzy ideals and filters in ordered semigroups. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Umar, Ismail Abubakar (2015) Controllers design of an active suspension system based on half car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Usman, Jamilu (2015) Performance of ternary blended cement mortar containing palm oil fuel ash and metakaolin. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

V

Vahedi, Abdolhamid (2015) Thermal and mechanical properties of prepacked concrete containing palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Valipour, Alireza (2015) Quantitative risk allocation approach in public-private partnership projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Vatumalai, Sivaprakash (2015) Employee’s attitude and managerial support on lean benefits. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Victor Samson, Shalinee Samson (2015) The effect of biological, chemical, and physical pre-treatment on solid pineapple waste for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

W

W. Zulkiffle, Wan Zuliyana (2015) Life cycle assessment of global warming potential in precast building component. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahab, Ahmad Mubin (2015) Effective aerosol optical thickness retrieval algorithm using modis 500 metre data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wahidin, Suzana (2015) Cultivation of nannochloropsis sp. for biodiesel production via microwave irradiation direct transesterification using ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wai, Yin Ling (2015) Resistive humidity sensor made from palm-oil-derived graphene film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Abdul Aziz, Wan Aminullah (2015) Wave height and wave energy mapping in Malaysian seas using satellite altimetry data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wan Harun, Mohammad Amir (2015) Pembinaan model pelan pemakanan berdasarkan prinsip Halalan Tayyiban. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Wan Hassan, Wan Hasmida (2015) Peat soil stabilization using Magnesium Chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan, Wan Zakaria (2015) Optimal proportional integral derivative controller for automatic voltage regulator system using particle swarm optimization algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Ismail, Wan Nor Zuriatina (2015) Non profit oriented entrepreneurs: sase study of non governmental organisation and social entrepreneurship in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Wan Mahmood, Wan Nurul Aiman (2015) Single station localised lightning locating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Mamat, Wan Syahira (2015) Amalan dalam membuat keputusan pelaburan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Wan Mohd. Zawawi, Wan Akmal ‘Izzati (2015) Partial discharge behaviour of cross-linked polyethylene - natural rubber blends nanocomposites as electrical insulating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Widodo, (2015) Evaluation of hole quality on micro drilling AISI 304 austenitic stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wirasnita, Riry (2015) Removal of bisphenol a from aqueous solution by adsorbing onto an activated carbon of the agricultural waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Ee Ting (2015) Copper (II) removal from aqueous solution using cobalt-doped iron oxide polyvinyl alcohol-alginate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, How Hwan (2015) Integrated circuit design based on charge-modulated field effect transistor for deoxyribonucleic acid biosensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Siao Yen (2015) Improving social responsiveness of children with autism spectrum disorder through neuro-physical exercise. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Wong, Siew Chiao (2015) Heavy metal tolerance of lysinibacillus fusiformis ZB2 isolated from textile effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Wong, Xue Yuan (2015) Hardware acceleration of 2D convolution using systolic array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Y

Yaacob, Mardhiah (2015) The influence of emotional intelligence and occupational stress towards job satisfaction among teachers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yaacob, Mohamad Syahrul Syazwan (2015) Inhibition of sulphate reducing bacteria to enhance methane yield in anaerobic digester. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yadegaridehkordi, Elaheh (2015) An adoption model for cloud-based collaborative learning applications from top Malaysian universities’ experience. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yahyazadeh, Sayyed Ali (2015) Service marketing mix and customer satisfaction of hotel in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yakub, Nasir Abubakar (2015) Doppler method for angle of arrival estimation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yakubu, Mahadi Lawan (2015) Modelling of road surface pollution buildup and washoff using rainfall simulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yan, Yen Qun (2015) Aquaponic system for self-sustain living. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yap, Yoon Loy (2015) Intelligent neural network for modelling and control of an automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yasak, Mohd. Fuad (2015) Sustainable assessment in manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ya’Acob, Nurulfara (2015) Influence of suction induced by grass root. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yeoh, Wei Cherng (2015) Robust electronic brake force distribution in hybrid electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yiak, Siw Chien (2015) Performance of piecewise gamma baseline hazard function in Bayesian survival analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yong, Pei Chei (2015) Stray cats management in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yong, Tze Mi (2015) Nanocrystalline diamond deposited on tungsten carbidecobalt substrates using hot filament chemical vapour deposition technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yunianta, Arda (2015) Ontology-based semantic heterogeneous data integration framework for learning environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yuniarto, Adhi (2015) Palm oil mill effluent treatment using aerobic submerged membrane bioreactor coupled with biofouling reducers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yunusa, Gambo Haruna (2015) Effect of transport layer system on suction distribution for tropical residual soil slopes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Nur Zulaikha (2015) Arsenic (III) removal from water using natural sedimentary rocks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Nurul Bashirah (2015) The comparison study of different additives on the characteristic and performance of ficus deltoidea- loaded niosomes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusof, Siti Sarah (2015) Determination of mass attenuation coefficients for several natural minerals in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yusof, Zulkifli (2015) Field programmable gate array architecture of proportional-integral-derivative controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusoff, Ahmad Razali (2015) Camera calibration for unmanned aerial vehicle mapping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yusuf, Abdullahi Moallim (2015) Comparative study of regtangular microstrip patch antenna array design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusuf, Taliat Ola (2015) Effects of palm oil fuel ash and metakaolin blend on properties of geopolymer mortar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusup, Amalina (2015) Detection of fluid leakage using ground penetrating radar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Z

Zainal Abidin, Nor Aliaa (2015) The effects of risk management practices, risk behaviour on research and development project performance in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Zainal Abidin, Nurashikin (2015) Dam break flood inundation modelling for Klang gate dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal Abidin Sham, Nurul Wahidah (2015) The structural and optical properties of neodymium doped lithium niobate and yttrium aluminum garnet single crystals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainir, Rubiatul Addawiyah (2015) Development of polarization and depolarization current measurement and analysis system using labview. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainol, Zanariah (2015) The impact of PV location on voltage profile and line losses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainol, Zuraida (2015) Testing of metal oxide surge arrester monitoring (MOSAM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainor Rahim, Aliff Ezwan (2015) The effectiveness of river water treatment plant in improving water quality in Sungai Kemensah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainuddin, Azmirawahida (2015) Gold nanoparticles assisted structural and optical modifications of samarium doped sodium-lithium tellurite glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainuddin, Mohamad Aiman (2015) Forecasting revenue passenger enplanements using wavelet-support vector machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zakaria, Ahmad Syazni (2015) Design and development of low-cost friction stir welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Izzah Hazirah (2015) Effect of filler on self-healing properties of silicone rubber in electrical tree phenomena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Khiruddin (2015) Can bus application in smart building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Nooraini (2015) Total phenolic content of polygonum minus, centella asiatica, cosmos caudatus and allium sativum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zakaria, Siti Aminah (2015) Framework of computer-aided sustainable integrated process design and control for reactor systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zakaria, Zulailah (2015) Design and control of electric vehicle charger. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakwoi, Iliya Solomon (2015) Optimization of a linearly polarized radial line slot array antenna design for direct broadcast satellite services. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zaudi, Nur Qamarina (2015) Modeling and control of ventilation and heating system using neuro-fuzzy inference system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zeinali, Mohammadjavad (2015) Design and optimization of innovative magnetorheological damper with low temperature. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Zergani, Sara (2015) Mathematical modeling for tsunami waves using lattice boltzmann method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zhang, Ye (2015) Gender preferences and Instagram hashtag usage on #Malaysianfood. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Zhou, Kaiqing (2015) Modelling and reasoning of large scale fuzzy petri net using inference path and bidirectional methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zolfeghari Far, Sayyed Yaghoub (2015) Performance of unpaved laterite road treated with chemical additives and waste tire. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulkurnain, Ahmad Uways (2015) Graphics processing unit based parallel copy move image forgery detection scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.