Items where Year is 2013

Article

Abdul Talib, Hayati Habibah and Mohd Ali, Khairul Anuar and Idris, Fazli (2013) Hubungan amalan pengurusan kualiti ke atas prestasi organisasi PKS industri pemprosesan makanan di Malaysia. Jurnal Teknologi (Social Sciences), 61 (1). pp. 1-10. ISSN E-ISSN 2180-3722

Chelliapan, Shreeshivadasan and Sallis, Paul J. (2013) Anaerobic biotechnology for pharmaceutical wastewater treatment. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 4 (4). pp. 1255-1261. ISSN 0975-8585

Ghoreishi, Khadijeh Beigom and Yarmo, Mohd. Ambar and Mohamad Nordin, Nor Asikin and Samsudin, Mohd. Wahid (2013) Enhanced catalyst activity of WO3 using polypyrrole as support for acidic esterification of glycerol with acetic acid. Journal of Chemistry . ISSN 2090-9063

Hashemi, Heidar and Mohamed Shaharoun, Awaludin and Izman, S. (2013) To improve machining fixture design: a case based reasoning paradigm. Journal of Basic and Applied Scientific Research, 3 (5). pp. 931-937. ISSN 2090-4304

Leong, Mohd. Salman and Lim, Meng Hee (2013) Blades rubs and looseness detection in gas turbines - operational field experience and laboratory study. Journal of Vibroengineering, 15 (3). pp. 1311-1321. ISSN 1392-8716

Lim, Meng Hee and Leong, Mohd. Salman (2013) Detection of early faults in rotating machinery based on wavelet analysis. Advances In Mechanical Engineering, 2013 . ISSN 1687-8132

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman (2013) Cyberethics and internet behaviour of Malaysian primary education students. Journal of Emerging Trends in Educational Research and Policy Studies, 4 (1). pp. 105-111. ISSN 2141-6990

Mohd. Ali, Khairul Anuar and Abdul Talib, Hayati @ Habibah (2013) Total quality management approach for Malaysian Food Industry: conceptual framework. Journal of Advanced Management Science, 1 (4). pp. 405-409. ISSN 2168-0787

Sarip, Shamsul (2013) Design development of lightweight disc brake for regenerative braking finite element analysis. International Journal of Applied Physics and Mathematics, 3 (1). pp. 52-58. ISSN 2010-362X

Sarip, Shamsul (2013) Design development of lightweight disc brake for regenerative braking - finite element analysis. International Journal of Applied Physics and Mathematics, 3 (1). pp. 52-58. ISSN 2010-362

Shamsuddin, Shuhana and Hussin, Natasha Azim (2013) Safe city concept and Crime Prevention Through Environmental Design (CPTEDD) for urban sustainability in Malaysian cities. American Transactions on Engineering and Applied Sciences, 2 (3). pp. 223-245. ISSN 2229-1660

Shamsudin, Supiah and Ab. Rahman, Azmi and Haron, Zaiton and Danazumi, Salisu and Jalil, Siti Hawa and Zakaria, Mohd. Azizi (2013) Rainwater harvesting design uncertainty using fuzzy logic. International Journal of Soft Computing and Engineering- National Science Library New Delhi, India, 2 (3). pp. 1-6. ISSN 2231-2307

Shamsudin, Supiah and Ab. Rahman, Azmi and Haron, Zaiton and Puteh Ahmad, Anieziatun Aqmal (2013) Detention pond phosphorus loadings uncertainty using fuzzy logic. International Journal of Soft Computing and Engineering, 3 (2). pp. 1-5. ISSN 22312307

Shamsudin, Supiah and Omar, Muhammad Adam and Zakaria, Mohd. Azizi and Ibrahim, Zulkiflee (2013) Sediment phosphorus loadings uncertainty using fuzzy-logic at southern malaysia detention pond. Indian Streams Research Journal, 3 (3). pp. 1-12. ISSN 0272-8397

Shamsudin, Supiah and Omar, Muhammad Adam and Zakaria, Mohd. Azizi and Ab. Rahman, Azmi and Haron, Zaiton and Ibrahim, Zulkiflee (2013) Sediment phosphorus loadings uncertainty using fuzzy-logic in detention pond at Southern Malaysia. Indian Streams Research Journal-Multidiciplinary Research Journal, 3 (3). pp. 1-9. ISSN 2230-7850

Towhidi, Farnaz and Masrom, Maslin and Abdul Manaf, Azizah (2013) An enhancement on passface graphical password authentication. Journal of Basic and Applied Scientific Research, 3 (2). pp. 135-141. ISSN 2090-4216

Wan Mohd. Rani, Wan Nurul Mardiah and Shamsuddin, Shuhana (2013) Evaluating the urban form elements as determinants of neighbourhood satisfaction in Malaysian cities. World Academy of Science, Engineering and Technology, 78 . pp. 1161-1167. ISSN 2010-376X

Book Section

Norazli, O. and Noor Ezlin, A. B. and Muhd. Noor, M. Y. and Shreeshivadasan, C. and Nor’azizi, O. (2013) The integrated solid waste management system: its implementation and impacts towards the environment. In: Causes, Impacts and Solutions to Global Warming. Springer New York, pp. 657-673. ISBN 978-146147588-0

Conference or Workshop Item

Shamsuddin, Shuhana and Hussin, Natasha Azim (2013) Implementation of crime prevention through environmental design by Kuala Lumpur City Hall. In: 3rd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2013), MAY 24-26, 2013, Jinan, PEOPLES R CHINA.

Abdul Rahim, Abd. Rahman (2013) PV thermal progress: research and applications. In: Proceedings of The 3Rd International Conference of Saving Energy In Refrigeration and Air-Conditioning, 2013.

Abdul Rahman, Norazmein and Norazmein Abdul Rahman, Norazmein and Safian Sharif , Norazmein and L . H. Tan, Norazmein and P. L. Tan, Norazmein and Izman Sudin, Norazmein (2013) Development of roughness models for sanded durian wood surfaces. In: The 1st International Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), 2013.

Abdul Raman, Norazmein (2013) Modeling of cutting force and chip formation when edge-milling medium density fiberboard. In: Conference on forestry and forest products research 2013 "Forestry R, D & C: Meeting National and Global Needs", 2013.

Abdul Talib , Hayati @ Habibah (2013) Development of Malaysia food franchising: an overview. In: The First International Conference on Human Capital and Knowledge Management 2013, 3-4 December 2013.

Abdulhussean, Sanaa Abdulkarim (2013) The talent recruitment strategies for administration and economic opportunities in the knowledge society. In: The Second international Conference The Managerial and Economic Opportunities in Business Environment,, 2013.

Abdulhussean, Sanaa Abdulkarim (2013) The usage of virtual reality technologies in the provision of sophisticated industrial information technology. In: The 6th Arab International Conference on Information Technology, 2013.

Abdullah, Haslaile and Cvetkovic, Dean. (2013) Double density wavelet for EEG signal denoising. In: 2nd International Conference on Machine Learning and Computer Science, 2013.

Abdullah, Nasuha Lee and Jamaludin, Khairur Rijal and Abdul Talib, Hayati @ Habibah (2013) Assessing impact of operational complexity on quality management practices in malaysia's electrical and electronics manufacturing industry. In: 4th International Graduate Conference on Engineering,Science and Humanity 2013.

Ali, Noor Azman and Mahat, Fauziah and Md. Yunus, Mohd. Yuzairin (2013) Total quality preventive management module and system development in engineering maintenance. In: Second International Conference on Engineering Business Management 2013, 2013.

Ali, Rosmah and Salim, Kamilah Radin and Hussain, Noor Hamizah and Haron, Habibah Norehan (2013) Students' ICT conceptions and the challenges in acquiring ICT skills for engineering learning. In: Proceedings of the Research in Engineering Education Symposium 2013, 2013.

Amrin, Astuty (2013) A review on the effect of alloying elements and heat treatment on the mechanical properties of Ti-6Al-4V as structural materials. In: 3rd International Conference on Advancement of Materials and Nanotechnology, 2013.

Ariff, M. H. M. and Zamzuri, H. and Ldris, N. K. N. and Mazlan, S. A. (2013) Antilock braking system slip control modeling revisited. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic combustion of waste palm trunk derived biochar and biomass. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic steam gasification of waste palm tree trunk derived bio-char. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Low temperature catalytic steam gasification of waste palm trunk by pottasium carbonate supported on perovskite oxide. In: Advanced Materials Research.

Gode, Ameya and Razak, Khamarrul Azahari (2013) Characterization of forest canopy gaps caused by landslides using high density airborne laser scanning. In: International Symposium & Exhibition on Geoinformation (ISG 2013), 24-25 September 2013, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia.

Hassan, Zulkifly and Abu Husain, Mohd. Khairi (2013) Risk-based asset integrity management for offshore floating facilities in Malaysia. In: Proceedings of the 2nd International Conference on Engineering Business Management 2013 (ICEBM 2013), 2013.

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2013) Time-frequency signal analysis in machinery fault diagnosis: review. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Khalid, C.M.L. and Mohamed, Z. and Fathi, M. S. and Zakiyudin, M. Z. and Muhamad Rawai, N. and Abedi, M. (2013) The potential of augmented reality technology for pre-construction. In: Applied Mechanics And Materials.

Lim, Meng Hee and Leong, M. S. and Keng, N. W. (2013) Vibration analysis of rub in rotating machinery. In: Applied Mechanics And Materials.

Mad Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Syed Abdul Hamid, Syed Hassan and Zakuan, Norhayati (2013) Exploratory analysis of ergonomics importance at workplace and safety culture amongst occupational safety and health practitioners. In: IAENG Transactions on Engineering Technologies.

Mahzan, M. I. and Muhamad, S. and Abdul Aziz, S. and Mat Ali, M. S. (2013) Composite wing flutter speed and frequency due to variable control surface deflection in low speed wind tunnel. In: Applied Mechanics And Materials.

Mohammad, Roslina (2013) Develop improvement maintenance management of Agusta A109 Helicopter at Army Aviation Unit to minimize out sourcing. In: International Conference On Engineering Business Management, 2013, Kuala Lumpur.

Mohammad, Roslina (2013) Logistic and maintenance management to increase readiness army combat armoured vehicle. In: International Conference on Engineering Business Management, 2013, Kuala Lumpur.

Mohd. Daud, Zalina and Abas, Norzaida (2013) A regionalized spatial temporal model for hourly rainfall process. In: International Conference on Computing, Mathematics and Statistics, 2013.

Mohd. Noor, N. and Mohd. Rijal, O. and Ming, J. T. C. and Roseli, F. A. and Ebrahimian, H. and Kassim, R. M. and Yunus, A. (2013) Segmentation of the lung anatomy for high resolution computed tomography (HRCT) thorax images. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Mohd. Yusof, Sha'ri (2013) An AHP based-model for sustainable manufacturing performance evaluation in automotive industry. In: Proceedings of the 12th International Symposium on the analytic Hierarchy Process 2013, 2013, Kuala Lumpur, Malaysia.

Nik Mohamed, Nik Abdullah and M. Idrus, Sevia and Mohammad, Abu Bakar and Yaakob, S. and Md. Yusoff, Nelidya and Ahmad, Norulhusna and Mohd. Sam, Suriani (2013) Experimental demonstration of a downlink remote optical local oscillator forradio over fiber system. In: 4th International Conference on Photonics (ICP 2013).

Omidinia, Siavash and Masrom, Maslin and Selamat, Harihodin (2013) An examination of the concept of smart school: an innovation to address sustainability. In: Proceedings Of The 2nd International Conference On Advances In Computer Science And Engineering (CSE 2013).

Rijal, O. M. and Abdullah, N. A. and Isa, Z. M. and Noor, N. M. and Tawfiq, O. F. (2013) Shape model of the maxillary dental arch using fourier descriptors with an application in the rehabilitation for edentulous patient. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Salim, Kamilah Radin and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah (2013) The achievement of laboratory work learning outcomes: students perceptions. In: Research In Engineering Education Symposium – Kuala Lumpur, 4 July through 6 July, 2013, Putrajaya, Malaysia.

Shamsuddin, Shuhana and Zaini, Khazainun (2013) The influence of the surveillance factors towards the residents' perceptions on safety at the shared outdoor spaces in gated community. In: 2nd Global Conference on Civil, Structural and Environmental Engineering, GCCSEE 2013, 28-29 Sept, 2013, Shenzhen, China.

Siew, C. B. and Abdul Rahman, Alias (2013) A schema-aware encoder for Putrajaya 3D. In: Urban And Regional Data Management, UDMS Annual 2013 - Proceedings Of The Urban Data Management Society Symposium 2013.

Zainal, Nurbaya and Zulkefle, H. and Mahmood, M. R. (2013) Dielectric and structural properties of RF magnetron sputter grown lead zirconium titanate thin film: a review. In: Advanced Materials Research.

Zakaria, Zarabizan and Ismail, Syuhaida and Md Yusof, Aminah (2013) Effectiveness of pavement management system and its effects to the closing of final account in construction project in Malaysia. In: International Conference on Science and Engineering in Mathematics, Chemistry and Physics (ScieTech), JAN 24-25, 2013, Jakarta, Indonesia.

Thesis

Weigl, Joerg Dieter (2013) Hydrogen fuel cell motorcycle with triple hybrid drive train. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Technology.