Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 242.


Abbaszadehfallah, I. and Esmaeeli, H. and Chepuan, O. B. and Hosseini, S. H. (2013) Merging gap acceptance at midblock u-turn facility (a case study on multilane divided highway in Malaysia). In: Applied Mechanics And Materials.

Abd Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Yahya, Mohd Yazid (2013) Novel epoxy resin composites containing polyaniline coated short kenaf bast fibers and polyaniline nanowires: mechanical and electrical properties. Journal of Polymer Engineering, 33 (6). pp. 565-577. ISSN 0334-6447

Abd Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Yahya, Mohd Yazid (2013) Para-hydroxybenzene sulfonic acid as a suitable dopant for the preparation of conductive epoxy/polyaniline nanowires nanocomposites blend: electrical vs mechanical properties. Polymer-Plastics Technology and Engineering, 52 (12). pp. 1266-1270. ISSN 0360-2559

Abdelrhman, A. M. and Leong, M. S. and Hee, L. M. and Ngui, W. K. (2013) Application of wavelet analysis in blade faults diagnosis for multi-stages rotor system. In: Applied Mechanics And Materials.

Abdul Latib, Azlan and Inti, M. M and Ahmad, A. D. (2013) Integration of new technological developments into technical college auto-mechanics course curriculum for enhancing job readiness of automotive students. International Journal of Management in Education, 3 (3). pp. 32-46. ISSN 2249-0558

Abdul Malik, Adi Maimun and Ahmad, Mohd. Zamani and Abd. Kader, A. S. and Jaswar, Jaswar and Koh, K. K. (2013) Marine technology education in Malaysia - 32 years of experience at UTM. In: Rina, Royal Institution Of Naval Architects - 2Nd International Conference On The Education And Professional Development Of Engineers In The Maritime Industry.

Abdul Rashid Husain, (2013) A new error handling algorithm for controller area network in networked control system. Computers In Industry, 64 (8). pp. 984-997. ISSN 0166-3615

Abdul Samad Ismail, (2013) Learning automata-based algorithms for finding cover sets in wireless sensor networks. Journal of Supercomputing, 66 (3). pp. 1533-1552. ISSN 0920-8542

Abdul Samad Ismail, (2013) Learning automata-based algorithms for solving the target coverage problem in directional sensor networks. Wireless Personal Communications, 73 (3). pp. 1309-1330. ISSN 0929-6212

Abdullah, Hayati and Ariffin, A. (2013) A study on the effect of exhaust gases on the indoor air quality onboard ships. In: Applied Mechanics And Materials.

AbuMansor, N. and Zulkifle, A. K. and Alias, N. and Hasan, M. K. and M. J. N., Boyce (2013) The higher accuracy fourth-order iade algorithm. Journal of Applied Mathematics . pp. 1-13. ISSN 1110-757X

Adali, Terin and Bentaleb, Ali and Elmarzugi, Nagib Ali and Hamza, Amal M. (2013) Peg-calf thymus dna interactions: conformational, morphological and spectroscopic thermal studies. International Journal of Biological Macromolecules, 61 . pp. 373-378. ISSN 0141-8130

Ahmad, S. and Latif, M. A. and Taib, H. and Ismail, A. F. (2013) Short review: ceramic foam fabrication techniques for wastewater treatment application. In: Advanced Materials Research.

Ahmad, Samsudin (2013) Mapping and modelling of animal diversity index in green campus using integrated geospatial techniques and in-situ camera trapping. In: FIG 2014 Research Initiative Seminar, 2013.

Ahmad Fauzi Ismail, (2013) Effect of pre-treatment and biofouling of proton exchange membrane on microbial fuel cell performance. International Journal of Hydrogen Energy, 38 (13). pp. 5480-5484. ISSN 0360-3199

Ahmad Fauzi Ismail, (2013) Development of a model for dimethyl ether non-adiabatic reactors to improve methanol conversion. Korean Journal of Chemical Engineering, 30 (10). pp. 1867-1875. ISSN 0256-1115

Ahmad Khairi Abdul Wahab, (2013) Euler-lagrange two-phase model for simulating live-bed scour beneath marine pipelines. Journal of Offshore Mechanics and Arctic Engineering-Transactions of The Asme, 135 (3). ISSN 0892-7219

Ahmad Rahman Songip, (2013) A working integrated model for the diffusion of construction innovation. American Journal of Applied Sciences, 10 (2). pp. 147-158. ISSN 1546-9239

Ahmed, Iqbal and Idris, Ani and Hussain, Ahmad and Khan, Muhammad Saad (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering & Technology, 36 (10). pp. 1683-1690. ISSN 0930-7516

Ahmed, Ishfaq and Wan Ismail, Wan Khairuzzaman and Mohannad Amin, Salmiah and Ramzan, Muhammad (2013) Influence of relationship of pos, lmx and organizational commitment on turnover intentions. Organization Development Journal, 31 (1). pp. 57-70. ISSN 0889-6402

Al-Rahmi, Waleed Mugahed and Othman, Mohd. Shahizan and Musa, Mahdi Alhaji (2013) A social media for collaborative learning adoption framework for higher education institutions in Malaysia. Computer Science & Engineering: an International Journal (CSEIJ) . pp. 1-10. ISSN 2231-329X

Aldaw Idrees, F. and Sakrani, S. and Othaman, Z. (2013) The atomic force microscope study of self-assembled silicon nanodots growth using magnetron sputtering system. In: Advanced Materials Research.

Ali Selamat, (2013) Route planning model of multi-agent system for a supply chain management. Expert Systems With Applications, 40 (5). pp. 1505-1518. ISSN 0957-4174

Alwaan, Ismaeel M. and Hassan, Azman (2013) The effects of magnesium oxide on the thermal, morphological, and crystallinity properties of metallocene linear low-density polyethylene/rubbers composite. Journal of Polymer Engineering, 33 (3). pp. 229-238. ISSN 0334-6447

Amir Hussin, Muhammad Rosni and Alias, Rose Alinda and Ismail, Kamariah (2013) Cost management skills among the owners of Malaysian small and medium enterprises (SMES) in the era of globalisation. International Journal of Entrepreneurship and Small Business, 20 (2). pp. 205-213. ISSN 1476-1297

Ardiyansyah Syahrom, (2013) Permeability studies of artificial and natural cancellous bone structures. Medical Engineering & Physics, 35 (6). pp. 792-799. ISSN 1350-4533

Asgari, B. and Osman, S.A. and Adnan, A. (2013) Three-dimensional finite element modelling of long-span cable-stayed bridges. IES Journal Part A: Civil and Structural Engineering, 6 (4). pp. 258-269. ISSN 1937-3260

Ausordin, S. F. and Abdul Rahim, S. K. and Seman, Norhudah and Dewan, R. (2013) A compact 3-DB coupler on a dual substrate layer with a rectangular slotted microstrip ground plane. In: 2013 IEEE BUSINESS ENGINEERING AND INDUSTRIAL APPLICATIONS COLLOQUIUM (BEIAC 2013), 7-9 April 2013, Malaysia.

Azhar Abdul Aziz, (2013) Analysis and modeling of exhaust gas temperature in an ethanol fuelled HCCI engine. Journal of Mechanical Science and Technology, 27 (11). pp. 3531-3539. ISSN 1738-494X

Azlan Adnan, (2013) Performance evaluation of tuned liquid dampers on response of a sdof system under earthquake excitation and harmonic load. Research Journal of Applied Sciences, Engineering and Technology, 6 (16). pp. 3018-3021. ISSN 2040-7459

Azman Hassan, (2013) Effect of zinc borate on flammability/thermal properties of ethylene vinyl acetate filled with metal hydroxides. Journal of Reinforced Plastics and Composites, 32 (15). pp. 1122-1128. ISSN 0731-6844

Azman Hassan, (2013) Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites. Journal of Composite Materials, 47 (26). pp. 3343-3350. ISSN 0021-9983

Azman Hassan, (2013) Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites. Materials and Design, 52 . pp. 841-848. ISSN 0261-3069

Azman Hassan, (2013) Physical and thermal properties of microwave-dried wood lumber impregnated with phenol formaldehyde resin. Journal of Composite Materials, 47 (28). pp. 3565-3571. ISSN 0021-9983

Azman Hassan, (2013) Physicochemical characterization of cellulose nanowhiskers extracted from oil palm biomass microcrystalline cellulose. Materials Letters, 113 . pp. 87-89. ISSN 0167-577X

Azman Hassan, (2013) Polylactic acid based blends, composites and nanocomposites. Advanced Structured Materials, 18 . pp. 361-396. ISSN 1869-8433

Azman Hassan, (2013) Preparation of activated carbon filled epoxy nanocomposites morphological and thermal properties. Journal of Thermal Analysis and Calorimetry, 113 (2). pp. 623-631. ISSN 1388-6150

Azman Hassan, (2013) Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber. Advances In Materials Science and Engineering . ISSN 1687-8434

Atta, Madiha and Idris, Ani and Bukhari, Ataullah and Wahidin, Suzana (2013) Intensity of blue led light: a potential stimulus for biomass and lipid content in fresh water microalgae chlorella vulgaris. Bioresource Technology, 148 . pp. 373-378. ISSN 0960-8524


Baharom, Jasmin (2013) Persepsi generasi terhadap faktor-faktor peningkatan perpaduan dalam kalangan rakyat Malaysia. In: N/A, 2013.

Baharuddin Aris, (2013) A check list for evaluating persuasive features of mathematics courseware. International Education Studies, 6 (9). pp. 125-134. ISSN 1913-9020

Bakar, N. A. and Selamat, A. (2013) Runtime verification of multi-agent systems interaction quality. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Bamaga, S. O. and Tahir, M. M. (2013) Towards light-weight composite construction: innovative shear connector for composite beams. In: Applied Mechanics And Materials.

Barati, Reza and Charehzehi, Aref and Preece, Christopher Nigel (2013) Enhancing planning and scheduling program by using benefits of bim-based applications. Civil and Environmental Research, 3 (5). pp. 41-48. ISSN 2224-5790

Baumgarten, D. and Eichardt, R. and Crevecoeur, G. and Supriyanto, E. and Haueisen, J. (2013) Magnetic nanoparticle imaging by random and maximum length sequences of inhomogeneous activation fields. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Buglione, Lucia and Heng See, Hong and C. Hauser, Peter (2013) Rapid separation of fatty acids using a poly(vinyl alcohol) coated capillary in nonaqueous capillary electrophoresis with contactless conductivity detection. Electrophoresis, 34 (14). pp. 2072-2077. ISSN 0173-0835

Bamaga, S. O. and Hussin, Mohd. Warid and Ismail, Mohamed A. (2013) Palm oil fuel ash: promising supplementary cementing materials. KSCE Journal of Civil Engineering, 17 (7). pp. 1708-1713. ISSN 1226-7988

Biswas, Subhankar and Ahsan, Qumrul and Cenna, Ahmed and Hasan, Mahbub and Hassan, Azman (2013) Physical and mechanical properties of jute, bamboo and coir natural fiber. Fibers and Polymers, 14 (10). pp. 1762-1767. ISSN 1229-9197


Chakraborty, Ananya Raka and Abu Mansor, Nur Naha (2013) Adoption of human resource information system: a theoretical analysis. In: Second International Conference On Leadership, Technology And Innovation Management (2012).

CHAREHJOO, FARZIN and Ho, Chin Siong (2013) Applying quantitative techniques to evaluate the level of sustainability for physical dimension of urban form in Sanandaj City, Iran. International Journal of Sustainable Development and Planning, 8 (3). pp. 275-287. ISSN 1743-7601

Chee, Zhou Kam and Kueh, Ahmad (2013) Bending response of cross-ply laminated composite plates with diagonally perturbed localized interfacial degeneration. The Scientific World Journal, 2013 . ISSN 1537-744X

Chong, K. C. and Lai, S. O. and Lee, K. M. and Lau, W. J. and Ooi, B. S. (2013) Performance of surface modification of polyvinylidene fluoride hollow fiber membrane in membrane distillation. In: Advanced Materials Research.

Chua, Kien-Hui and Lee, Ting-Hun and Nagandran, Kamini and Md. Yahaya, Nor Hamdan and Lee, Chew-Tin and Tan, Eddie Ti Tjin and Abdul Aziz, Ramlan (2013) Edible bird’s nest extract as a chondro-protective agent for human chondrocytes isolated from osteoarthritic knee: in vitro study. BMC Complementary and Alternative Medicine, 13 (19). pp. 1-9. ISSN 1472-6882

Chua, Lee Suan and A Rahaman, Norul Liza and Adnan, Nur Ardawati and Eddie Tan, Ti Tjih (2013) Antioxidant activity of three honey samples in relation with their biochemical components. Journal of Analytical Methods In Chemistry . ISSN 2090-8865

Chua Lee Suan, (2013) Comparison of total phenolic content, scavenging activity and hplc-esi-ms/ms profiles of both young and mature leaves and stems of andrographis paniculata. Natural Product Communications, 8 (12). pp. 1725-1729. ISSN 1934-578X

Chua Lee Suan, (2013) Honey protein extraction and determination by mass spectrometry. Analytical and Bioanalytical Chemistry, 405 (10). pp. 3063-3074. ISSN 1618-2642

Chua Lee Suan, (2013) Plant proteins, minerals and trace elements of eurycoma longifolia (tongkat ali). Natural Product Research, 27 (4-5). pp. 314-318. ISSN 1478-6419

Chua Lee Suan, (2013) A review on plant-based rutin extraction methods and its pharmacological activities. Journal of Ethnopharmacology, 150 (3). pp. 805-817. ISSN 0378-8741

Chughtai, Muhammad Waseem and Selamat, Ali and Ghani, Imran (2013) Goal-based hybrid filtering for user-to-user personalized recommendation. International Journal of Electrical and Computer Engineering (IJECE), 3 (3). pp. 329-336. ISSN 2088-8708


Emadzadeh, D. and Lau, Woei Jye and Ismail, Ahmad Fauzi (2013) Synthesis of thin film nanocomposite forward osmosis membrane with enhancement in water flux without sacrificing salt rejection. Desalination, 330 . pp. 90-99. ISSN 0011-9164

Eko Supriyanto, (2013) Events associated with apoptotic effect of p -coumaric acid in hct-15 colon cancer cells. World Journal of Gastroenterology, 19 (43). pp. 7726-7734. ISSN 1007-9327

El Enshasy, Hesham Ali Metwally and Hatti-Kaul, Rajni (2013) Mushroom immunomodulators: unique molecules with unlimited applications. Trends In Biotechnology, 31 (12). pp. 668-677. ISSN 0167-7799

El-Enshasy, Hesham Ali and Elsayed, Elsayed Ahmed and Aziz, Ramlan and A. Wadaan, Mohamad (2013) Mushrooms and truffles: historical biofactories for complementary medicine in africa and in the middle east. Evidence-Based Complementary and Alternative Medicine . ISSN 1741-427X

Elsayed, Ahmed Elsayed and Fattah Farid, Mohamed Abdel and El Enshasy, Hesham Ali (2013) Improvement in natamycin production by streptomyces natalensis with the addition of short-chain carboxylic acids. Process Biochemistry, 48 (12). pp. 1831-1838. ISSN 1359-5113

Eluwa, Stephen Enyinnaya and Ho, Chin Siong (2013) The impact of psychological and socio-economic variables on household energy conservation: a case study of Ibadan City, Nigeria. ARPN Journal of Earth Sciences, 2 (3). pp. 81-89. ISSN 2305-493X

Esmaeeli, H. and Abbaszadehfallah, I. and Chepuan, O. B. and Hosseini, S. H. (2013) Road accident analysis factors. In: Applied Mechanics And Materials.


Farahwahida Mohd. Yusof, (2013) Euthanasia: melanggar etika dan hak asasi manusia. Jurnal Teknologi (Sciences and Engineering), 64 (1). pp. 33-41. ISSN 0127-9696

Fauzan Ahmad, (2013) Demonstration of microfiber hybrid mach-zehnder and knot resonator structure. Microwave and Optical Technology Letters, 55 (1). pp. 100-102. ISSN 0895-2477

Fauzan Ahmad, (2013) A q-switched multi-wavelength brillouin erbium fiber laser with a single-walled carbon nanotube saturable absorber. Laser Physics, 23 (5). ISSN 1054-660X

Fong Wan Heng, (2013) Probabilistic semi-simple splicing system and its characteristics. Jurnal Teknologi (Sciences and Engineering), 62 (3). pp. 21-26. ISSN 0127-9696


Ghanbaripanah, Afsaneh and Mustaffa, Mohamed Sharif and Ahmad, Roslee (2013) Structural analysis of family dynamics across family life cycle in Iran. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Ghasemi, Mostafa and Wan Daud, Wan Ramli and Ismail, Ahmad Fauzi and Jafari, Yaghoob and Ismail, Manal and Mayahi, Alireza and Othman, Jamal (2013) Simultaneous wastewater treatment and electricity generation by microbial fuel cell: performance comparison and cost investigation of using nafion 117 and speek as separators. Desalination, 325 . pp. 1-6. ISSN 0011-9164

Gohari, R. Jamshidi and Lau, Woei Jye and Matsuura, T. and Halakoo, Elnaz and Ismail, Ahmad Fauzi (2013) Adsorptive removal of PB(ii) from aqueous solution by novel PES/HMO ultrafiltration mixed matrix membrane. Separation and Purification Technology, 120 . pp. 59-68. ISSN 1383-5866


Hadibarata, Tony and Teh, Zee Chuang and Rubiyatno, Rubiyatno and Ahmad Zubir, Meor Mohd Fikri and Khudhair, Ameer Badr and Mohd Yusoff, Abdull Rahim and Salim, Mohd Razman and Hidayat, Topik (2013) Identification of naphthalene metabolism by white rot fungus pleurotus eryngii. Bioprocess and Biosystems Engineering, 36 (10). pp. 1455-1461. ISSN 1615-7591

Hadibarata, Tony (2013) Effect of metals on amaranth decolorization by white-rot fungus pleurotus eryngi f019. Journal of Biological Sciences, 13 (6). pp. 550-554. ISSN 1727-3048

Hamzah, N. and Aripin, M. K. and M. Sam, Y. and Selamat, H. and Ismail, M. F. (2013) Vehicle stability enhancement based on second order sliding mode control. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Hamzah, N. and Nordin, N. M. and Isahak, W. N. R. W. and Kassim, M. B. and Yarmo, M. A. (2013) Study on effect recyclability of ru/bentonite-tio2 catalysts in glycerol hydrogenolysis reaction using x-ray photoelectron spectroscopy (XPS). In: Advanced Materials Research.

Hamzah, Norhazimi and Md Sam, Yahaya and Selamat, Hazlina and Aripin, M. Khairi (2013) GA-based sliding mode controller for yaw stability improvement. In: 2013 9th Asian Control Conference, ASCC 2013.

Harun, Z. and Jamalludin, M. R. and Yunos, M. Z. and Shohur, M. F. and Ismail, A. F. (2013) The effect of amorphous rice husk silica to the polysulfone membrane separation process. In: Advanced Materials Research.

Harun, Z. and Shohur, M. F. and Yunos, M. Z. and Jamalludin, M. R. and Ismail, A. F. (2013) The effect of crystalline rice husk silica on polysulfone membrane for wastewater treatment. In: Applied Mechanics And Materials.

Hashim, Mazlan and Nadzri, M. I. (2013) Validation of MODIS data for localized spatio-temporal evapotranspiration mapping. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Hesham Ali Metwally Ali El Enshasy, (2013) Scaling up, characterization of levan and its inhibitory role in carcinogenesis initiation stage'. Carbohydrate Polymers, 95 (1). pp. 578-587. ISSN 0144-8617

Ho, C. S. and Matsuoka, Y. and Chau, L. W. and Teh, B. T. and Simson, J. J. and Gomi, K. (2013) Blueprint for the development of low carbon society scenarios for asian regions- case study of Iskandar Malaysia. In: IOP Conference Series: Earth and Environmental Science.

Ho, Chin Siong (2013) Low carbon urban development strategy in Malaysia - the case of Iskandar Malaysia development corridor. Habitat International, 37 . pp. 43-51. ISSN 0197-3975

Hong, Heng See and Stratz, Simone and Hauser, Peter C. (2013) Electro-driven extraction across a polymer inclusion membrane in a flow-through cell. Journal of Chromatography A, 1300 . pp. 79-84. ISSN 0021-9673


Ibrahim Ngah, (2013) Facilitating earthquake-affected rural women communities toward sustainable livelihoods and agriculture. Agroecology and Sustainable Food Systems, 37 (5). pp. 592-613. ISSN 2168-3565

Ilbeygi, H. and Ismail, A.F. and Mayahi, A. and Nasef, M.M. and Jaafar, J. and Jalalvandi, E. (2013) Transport properties and direct methanol fuel cell performance of sulfonated poly (ether ether ketone)/cloisite/triaminopyrimidine nanocomposite polymer electrolyte membrane at moderate temperature. Separation and Purification Technology, 118 . pp. 567-575. ISSN 1383-5866

Irina Safitri Zen, (2013) No plastic bag campaign day in Malaysia and the policy implication. Environment, Development and Sustainability, 15 (5). pp. 1259-1269. ISSN 1387-585X

Irina Safitri Zen, (2013) Use of asbestos building materials in Malaysia: legislative measures, the management, and recommendations for a ban on use. International Journal of Occupational and Environmental Health, 19 (3). pp. 169-178. ISSN 1077-3525

Isa, Mona and Ting, Kien Hwa and Megat Abd. Rahman, Megat Mohamed Ghazali and Sipan, Ibrahim @ Atan (2013) Green office building investment in Malaysia: a review. The Malaysian Surveyor, 48 (3). pp. 6-19. ISSN 2232-1292

Ismail, Muhmad Fahezal and Peng, Kemao and Hamzah, Norhazimi and Md. Sam, Yahaya and Aripin, Muhamad Khairi (2013) A control performance of linear model and the Macpherson Model for active suspension system using composite nonlinear feedback. In: Proceedings - 2012 Ieee International Conference On Control System, Computing And Engineering, ICCSCE 2012.

Ismail, Nor Anita Fairos and Kamarudin, Sheikh Nasir and Mohd. Rahim, Mohd. Sharfy and Liu, J. G. and Mason, P. (2013) Visualization of earth deformation in 2D. International Journal of Soft Computing and Software Engineering [JSCSE], 3 (6). pp. 1-18. ISSN 2251-7545

Iyas, M. M. and Sallehuddin, M. and Sukri, M. A. M. and Shuhaimi, M. M. (2013) Wind tunnel testing of composite wing flutter speed due to control surface excitation. In: Applied Mechanics And Materials.


Jafri, Syed Khurram Ali and Ismail, Kamariah and Khurram, Wafa and Soehod, Khairiah and Sofian, Saudah (2013) Sustainable growth in women owned technoprises: a conceptual framework. In: Proceedings Of The 2013 International Conference On Information, Business And Education Technology (ICIBET 2013).

Jalil Ali, (2013) Generation of potential wells used for quantum codes transmission via a TDMA network communication system. Security and Communication Networks, 6 (11). pp. 1301-1309. ISSN 1939-0122

Jalil Ali, (2013) Nano particle trapping by ultra-short tweezer and wells using microring resonator interferometer system for spectroscopy application. Nanoscience and Nanotechnology Letters, 5 (8). pp. 850-856. ISSN 1941-4900

Jalil Ali, (2013) Optical quantum transmitter with finesse of 30 at 800-nm central wavelength using microring resonators. Optical and Quantum Electronics, 45 (10). pp. 1095-1105. ISSN 0306-8919

Jamil, Haitham A. and Zarei, Roozbeh and Fadlelssied, Nadir O. and Aliyu, M. and Nor, Sulaiman M. and Marsono, Muhammad N. (2013) Analysis of features selection for p2p traffic detection using support vector machine. In: International Conference of Information and Communication Technology (ICoICT), MAR 20-22, 2013, Bandung, Indonesia.

Johari, Anwar and Hafshar, S. Siti and Hashim, Haslenda and Mat, Ramli (2013) Feed-in-tariff (FIT) concept to promote the usage of renewable energy in Malaysia. International Journal of Energy and Power (IJEP), 2 (2). pp. 33-37. ISSN 2169-4915


K.Nair, Abhinav and M.Isloor, Arun and Kumar, Rajesha and Ismail, Ahmad Fauzi (2013) Antifouling and performance enhancement of polysulfone ultrafiltration membranes using CAVO3 nanoparticles. Desalination, 322 . pp. 69-75. ISSN 0011-9164

Kamarudin, M. N. and Husain, A. R. and Ahmad, M. N. (2013) Control of uncertain nonlinear systems using mixed nonlinear damping function and backstepping techniques. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Kiani, Hossein and Mahmoud Nasef, Mohamed and Javadi, Ali and Abouzari-Lotf, Ebrahim and Nemati, Firouzeh (2013) Highly refractive, transparent, and solution processable polyamides based on a noncoplanar ortho-substituted sulfonyl-bridged diacid monomer containing chlorine side groups. Journal of Polymer Research, 20 (9). ISSN 1022-9760

Kikuchi, Akira and Ismail, Nor Eman and Janalizadeh, Narges and Mutah, Musa and Faiz, Muhamad (2013) Convenient multi-parameter water quality analysis by onsite filtered sample for eutrophication monitoring. International Journal of Geomate, 5 (1). pp. 605-609. ISSN 2186-2982

Kumar, Rajesha and Isloor, Arun M. and Ismail, Ahmad Fauzi and Rashid, Suraya A. and Matsuura, T. (2013) Polysulfone-chitosan blend ultrafiltration membranes: preparation, characterization, permeation and antifouling properties. RSC Advances, 3 (21). pp. 7855-7861. ISSN 2046-2069


Latiff, Z. A. and Aziz, A. A. and Mohd Perang, M. R. and Abdullah, N. (2013) The effect of fuel additives on gasoline heating value and spark ignition engine performance: case study. In: Applied Mechanics And Materials.

Lau, W. J. and Ismail, A. F. and Razis, M. and Ng, B. C. and Goha, P. S. and Latip, R. A. and Othman, N. H. (2013) Investigation on the thermal stability of refined palm oil produced from membrane-based refining technique. Journal of Membrane and Separation Technology, 2 (4). pp. 206-212. ISSN 1929-6037

Lau Woei Jye, (2013) Performance of psf ultrafiltration membrane: effect of different nonsolvent on coagulation medium. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 59-63. ISSN 0127-9696

Lee Chew Tin, (2013) A non mercuric shoots bud sterilization technique for boesenbergia rotunda (l) mansf. Kulturpfl. Jurnal Teknologi (Sciences and Engineering), 64 (2). pp. 21-24. ISSN 0127-9696

Lee Siew Ling, (2013) Effect of hydrochloric acid on formation of nanocrystalline bismuth phosphate synthesized via hot injection method. Asian Journal of Chemistry, 25 (13). pp. 7205-7207. ISSN 0970-7077

Lee Siew Ling, (2013) Quality control in cocoa powder production process: a robust mspc approach. Jurnal Teknologi (Sciences and Engineering), 63 (2). pp. 41-44. ISSN 0127-9696

Loi, W. S. and Ong, Chee Tiong (2013) Optical solitons: mathematical model and simulations. In: Beiac 2013 - 2013 IEEE Business Engineering And Industrial Applications Colloquium.


Marghany, Maged Mahmoud (2013) Genetic algorithm for oil spill automatic detection from envisat satellite data. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Marghany, Maged Mahmoud (2013) Three dimensional coastline deformation from insar envisat satellite data. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Mat Uzir Wahit, (2013) Comparative studies of mechanical properties of poly(epsilon-caprolactone) and poly(lactic acid) blends reinforced with natural fibers. Composite Interfaces, 20 (7). pp. 459-467. ISSN 0927-6440

Mat Uzir Wahit, (2013) Regenerated cellulose/epoxidized natural rubber blend film. Materials Letters, 111 . pp. 221-224. ISSN 0167-577X

Mat Uzir Wahit, (2013) Regenerated cellulose/halloysite nanotube nanocomposite films prepared with an ionic liquid. Materials Chemistry and Physics, 141 (2-3). pp. 936-943. ISSN 0254-0584

Mazlan Hashim, (2013) Fusing aster, ali and hyperion data for enhanced mineral mapping. International Journal of Image and Data Fusion, 4 (2). pp. 126-145. ISSN 1947-9832

Misdan, N. and Lau, Woei Jye and Ismail, Ahmad Fauzi and Matsuura, T. (2013) Formation of thin film composite nanofiltration membrane: effect of polysulfone substrate characteristics. Desalination, 329 . pp. 9-18. ISSN 0011-9164

Mohamad, Hisham and Namazi, Eshagh (2013) Potential damage assessment in buildings undergoing tilt. Proceedings of The Institution of Civil Engineers-Geotechnical Engineering, 166 (4). pp. 365-374. ISSN 1353-2618

Mohamad, S. H. and Idris, M. I. and Abdullah, H. Z. and Ismail, A. F. (2013) Short review of ultrafiltration of polymer membrane as a self-cleaning and antifouling in the wastewater system. In: Advanced Materials Research.

Mohamad Ali Fulazzaky, (2013) Sediment traps from synthetic construction site stormwater runoff by grassed filter strip. Journal of Hydrology, 502 . pp. 53-61. ISSN 0022-1694

Mohamed Noor, Norhayati and Abd. Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan (2013) The effect of virgin coconut oil loaded solid lipid particles (vco-slps) on skin hydration and skin elasticity. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 39-43. ISSN 0127-9696

Mohamed Salleh, Abdul Hakim and Mohamad, Mohd. Saberi and Deris, Safaai and Md. Illias, Rosli (2013) A review on pathway analysis software based on microarray data interpretation. International Journal of Bio-Science and Bio-Technology, 5 (4). pp. 149-157. ISSN 2233-7849

Mohamed Sharif Mustaffa, (2013) Some factors lead to hospitalization and relapse of bipolar disorders. Advanced Science Letters, 19 (10). pp. 3059-3062. ISSN 1936-6612

Mohammad Ismail, (2013) Performance of hydrocarbon particles on the drying shrinkage of cement mortar. Construction and Building Materials, 48 . pp. 868-873. ISSN 0950-0618

Mohammad Nazri Mohd. Jaafar, (2013) Reduction of major pollutants via air-staged commbustion on burner system. Jurnal Teknologi (Sciences and Engineering), 64 (1). pp. 67-71. ISSN 0127-9696

Mohd Kasim, Abdul Rahman and Mohammad, Nurul Farahain and Aurangzaib, Aurangzaib and Shafie, Sharidan (2013) Mixed convection flow of viscoelastic fluid over a sphere with constant heat flux. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Mohd. Farid Muhamad Said, (2013) Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering, 7 (6). pp. 1152-1158. ISSN 1970-8734

Mohd. Hamdan Ahmad, (2013) Parameters for building materials specifications in Lagos, Nigeria. SAGE Open, 3 (3). pp. 1-5. ISSN 2158-2440

Mohd. Hamdan Ahmad, (2013) Performance and resistance of paint used as exterior finish in salt laden environment. Structural Survey, 31 (3). pp. 214-224. ISSN 0263-080X

Mohd. Ismail , Kamsiah (2013) Engineering technology in Malaysia: a nomenclature dilemma. In: -.

Mohd. Ismid Md. Said, (2013) Seagrass at south western coast of Johor. Journal of Sustainability Science and Management, 8 (1). pp. 73-79. ISSN 1823-8556

Mohd. Ismid Mohd. Said, (2013) Comparison between water quality index (WQI) and biological water quality index (BWQI) for water quality assessment: case study of Melana River, Johor. Malaysian Journal of Analytical Sciences, 17 (2). pp. 224-229. ISSN 1394-2506

Mohd. Ismid Mohd. Said, (2013) Potential of aquatic plant as phytoremediator for treatment of petrochemical wastewater in Gebeng area, Kuantan. Advances In Environmental Biology, 7 (SPEC. ). pp. 3808-3814. ISSN 1995-0756

Mohd. Marsin Sanagi, (2013) Parametric evaluation of microwave-assisted extraction of phenolics from c. Domestica val. Jurnal Teknologi (Sciences and Engineering), 62 (3). pp. 95-98. ISSN 0127-9696

Mohd. Perang, Mohd. Rozi and Nasution, Henry and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Dahlan, Afiq Aiman (2013) Experimental study on the replacement of HFC-R134A by hydrocarbons mixture in automotive air conditioner. International Journal of Technology, 4 (1). pp. 81-92. ISSN 2086-9614

Mohd. Rahim , Mohd. Shafry (2013) Classify the plant species based on lobes, sinuses and margin. In: IEEE International Conference on Interactive digital Media (ICIDM 2013).

Mohd. Rahim , Mohd. Shafry (2013) Comparative study of clustering algorithms in order to Virtual Histology (VH) image's segmentation. In: IEEE International Conference on Interactive digital Media (ICIDM 2013).

Mohd. Rahim , Mohd. Shafry (2013) A novel approach to enhance robustness in digital image watermarking using multiple bit-planes of intermediate significant bits. In: A Novel approach to Enhance Robustness in digital Image Watermarking using Multiple Bit-planes of Intermediate Significant Bits, 2013.

Mohd. Rahim , Mohd. Shafry (2013) A review on fingerprint image enhancement techniques. In: IEEE International Conference on Interactive digital Media (ICIDM 2013), 2013.

Mohd. Rahim , Mohd. Shafry (2013) Hevea leaf boundary identification based on morphological transformation and edge detection. In: 11th International Conference of Pattern Recognition and Image Analysis: New Information Technologies (PRIA-11-2013), 2013.

Mohd. Saberi Mohamad, (2013) An enhancement of binary particle swarm optimization for gene selection in classifying cancer classes. Algorithms For Molecular Biology, 8 . ISSN 1748-7188

Mohd. Saberi Mohamad, (2013) A method to construct gene regulatory networks to estimate and calculate time delays. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 25-31. ISSN 0127-9696

Mohd. Saberi Mohamad, (2013) A review for detecting gene-gene interactions using machine learning methods in genetic epidemiology. Biomed Research International . ISSN 2314-6133

Mohd. Saberi Mohamad, (2013) A review of computational approaches for in silico metabolic engineering for microbial fuel production. Current Bioinformatics, 8 (2). pp. 253-258. ISSN 1574-8936

Mohd. Saberi Mohamad, (2013) Validation of hierarchical gene clusters using repeated measurements. Jurnal Teknologi (Sciences and Engineering), 61 (1). pp. 7-12. ISSN 0127-9696

Mohd. Shafry Mohd. Rahim, (2013) A comparison between four-tier framework and three-tier framework for online applications of 3D GIS visualization. Life Science Journal, 10 (3). pp. 1534-1540. ISSN 1097-8135

Mohd. Shafry Mohd. Rahim, (2013) Digital dental x-ray image segmentation and feature extraction. Telkomnika, 11 (6). pp. 3109-3114. ISSN 2302-4046

Mohd. Shafry Mohd. Rahim, (2013) An effective visualization and comparison of online terrain draped with multi-sensor satellite images. Arabian Journal of Geosciences, 6 (12). pp. 4881-4889. ISSN 1866-7511

Mohd. Yunus, Mohd. Zulkifli (2013) GIS technologies as a tools to predict landslide. In: 9th International Conference of Geotechnical & Transportation Engineering (Geotropika) and The 1st International Conference On Construction And Building Engineering (Iconbuild) - GEOCON 2013, 2013.

Mokhtar, Iqbal and Yahya, Mohd. Yazid and Abdul Kadir, Mohammed Rafiq (2013) Mechanical characterization of basalt/hdpe composite under in-vitro condition. Polymer-Plastics Technology and Engineering, 52 (10). pp. 1007-1015. ISSN 0360-2559

Moorthy, K. and Mohamad, M. S. and Deris, S. (2013) Multiple gene sets for cancer classification using gene range selection based on random forest. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Muhammad, Noor and Khan, Hidayatullah and Sarmin, Nor Haniza and Zeb, Aurang (2013) Expansion of COS N Theta and SIN N Theta in terms of cosines and sines of multiple of theta by using noor's triangle. Menemui Matematik (Discovering Mathematics), 35 (1). pp. 49-55. ISSN 22317023

Muhammad Aamer Rafique Bhutta, (2013) Properties of microfine cement grouts at 4 degrees c, 10 degrees c and 20 degrees c. Construction and Building Materials, 47 . pp. 1145-1153. ISSN 0950-0618

Muhammad Aamer Rafique Bhutta, (2013) Properties of porous concrete from waste crushed concrete (recycled aggregate). Construction and Building Materials, 47 . pp. 1243-1248. ISSN 0950-0618

Muhd. Zaimi Abdul Majid, (2013) Iran's achievements in renewable energy during fourth development program in comparison with global trend. Renewable & Sustainable Energy Reviews, 22 . pp. 561-570. ISSN 1364-0321

Muhd. Zaimi Abdul Majid, (2013) Post occupancy evaluation assessment model for low energy office buildings. Advanced Science Letters, 19 (11). pp. 3213-3215. ISSN 1936-6612

Mulop , Normah (2013) The performance of students learning thermodynamics through an online courseware. In: REES 20132013 Research In Engineering Education Symposium, 2013.

Muniyandi, Shantha Kumari and Sohaili, Johan and Hassan, Azman (2013) Mechanical, thermal, morphological and leaching properties of nonmetallic printed circuit board waste in recycled hdpe composites. Journal of Cleaner Production, 57 . pp. 327-334. ISSN 9509-6526

Mustafa Yusof, (2013) An efficient approach for identifying constitutive parameters of the modified oyane ductile fracture criterion at high temperature. Mathematical Problems In Engineering . ISSN 1024-123X

Mustafa Yusof, (2013) Singular solutions in viscoplasticity under plane strain conditions. Meccanica, 48 (9). pp. 2203-2208. ISSN 0025-6455

Mustafa Yusof, (2013) A three dimensional limit load solution for highly undermatched single edge cracked specimens in pure bending. Fatigue and Fracture of Engineering Materials and Structures, 36 (5). pp. 375-381. ISSN 8756-758X


Nagib Ali Elmarzugi, (2013) A novel swietenia macrophylla oil self-nanoemulsifying system: development and evaluation. International Journal of Pharmacy and Pharmaceutical Sciences, 5 (SUPPL ). pp. 639-644. ISSN 9751-4091

Nagib Ali Elmarzugi, (2013) Preparation and evaluation of olive oil nanoemulsion using sucrose monoester. International Journal of Pharmacy and Pharmaceutical Sciences, 5 (SUPPL ). pp. 434-440. ISSN 9751-4091

Nagib Ali Elmarzugi, (2013) A review on the phytopharmacological effect of swietenia macrophylla. International Journal of Pharmacy and Pharmaceutical Sciences, 5 (SUPPL ). pp. 47-53. ISSN 9751-4091

Nasution, Henry and Abdul Latiff, Z. and Aziz, A. A. and Mohd Perang, M. R. (2013) Retrofitting R-22 split type air conditioning with hydrocarbon (HCR-22) refrigerant. In: Applied Mechanics And Materials.

Ng, Siew Teng and Chong, Chuii Khim and Choon, Yee Wen and Chai, Lian En (2013) Estimating kinetic parameters for essential amino acid production in arabidopsis thaliana by using particle swarm optimization. Jurnal Teknologi (Sciences and Engineering), 64 (1). pp. 73-80. ISSN 0127-9696

Nizara, Tamar Jaya and Mohd Yusof, Farahwahida (2013) Pemikiran akidah imam al-syafi`i. Jurnal Teknologi (Sains Sosial), 62 (1). pp. 55-65. ISSN 2289-5434

Nor, N. A. M. and Jaafar, Juhana and Othman, M. H. D. and A. Rahman, Mukhlis. (2013) A review study of nanofibers in photocatalytic process for wastewater treatment. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 83-88. ISSN 0127-9696

Nor Asikin Mohamad Nordin, (2013) Synthesis of alkylpolyglucoside from dextrose-decanol in the presence of silicotungstic acid sol-gel catalyst. Malaysian Journal of Analytical Sciences, 17 (1). pp. 91-100. ISSN 1394-2506

Nordin, N. A. M. and Hamzah, N. and Adnan, N. F. and Isahak, W. N. R. W. and Yusof, M. Z. M. and Salimon, J. and Yarmo, M. A. (2013) Synthesis characterisation and catalytic activity of sol-gel derived silica-mineral acids. In: Advanced Materials Research.

Noriah Bidin, (2013) Fiber optic displacement sensor for honey purity detection in distilled water. Optoelectronics and Advanced Materials-Rapid Communications, 7 (7-8). pp. 565-568. ISSN 1842-6573

Noriah Bidin, (2013) Optimization of the super lateral energy in laser surface alloying of aluminum. Laser Physics Letters, 10 (10). ISSN 1612-2011

Norzieha Mustapha, (2013) Peristaltic flow of power law fluid in a non-uniform inclined tube: exact solutions. International Journal of Applied Mathematics and Statistics, 43 (13). pp. 102-109. ISSN 0973-1377


Ong Chee Tiong, (2013) Acne vulgarism treatment using ultra-short laser pulse generated by micro- and nano-ring resonator system. Artificial Cells Nanomedicine and Biotechnology, 41 (2). pp. 92-97. ISSN 2169-1401

Ong Chee Tiong, (2013) Modulation of nonlinear waves in an inviscid fluid (blood) contained in a stenosed artery. Applied Mathematical Sciences, 7 (101-10). pp. 5003-5012. ISSN 1312-885X

Othman, Nor Zalina and Kandiyil, Subeesh kunhi and Abd Malek, Roslinda and Jalal, Yahya and Aziz, Ramlan and Hatti-Kaul, Rajni and El Enshasy, Hesham (2013) Optimization of xylanase enzyme production using recombinant escherichia coli by Response Surface Methodology (RSM). In: 2013 AIChE Annual Meeting, 3rd-8th November 2013, Hilton San Francisco Union Square, San Francisco, CA.

Othman Ibrahim, (2013) A model for developing online verification among e-commerce consumers. Journal of Theoretical and Applied Information Technology, 55 (1). pp. 39-52. ISSN 1992-8645

Othman Ibrahim, (2013) Refining e-government readiness index by cloud computing. Jurnal Teknologi (Sciences and Engineering), 65 (1). pp. 23-34. ISSN 0127-9696


Perang, M. R. M. and Abdul Latiff, Z. and Aziz, A. A. and Mokhri, M. A. (2013) Design of a four-stroke homogeneous charge compression ignition engine. In: Applied Mechanics And Materials.

Perang, M. R. M. and Nasution, H. and Abdul Latiff, Z. and Aziz, A. A. and Dahlan, A. A. (2013) Experimental study on the replacement of HFC-R134A by hydrocarbons in automotive air conditioning system. In: Applied Mechanics And Materials.


Rahbari-Sisakht, M. and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. (2013) Effect of SMM concentration on morphology and performance of surface modified PVDF hollow fiber membrane contactor for CO2 absorption. Separation and Purification Technology, 116 . pp. 67-72. ISSN 1383-5866

Rafaqat Hussain, (2013) Copper vanadate nanowires-based mis capacitors: synthesis, characterization, and their electrical charge storage applications. Journal of Nanoparticle Research, 15 (8). ISSN 1388-0764

Rahiman, Rosdina and Mohd. Ali, Mohd. Alauddin and Ab-Rahman, Mohammad Syuhaimi (2013) Carotenoids concentration detection investigation: a review of current status and future trend. International Journal of Bioscience, Biochemistry and Bioinformatics, 3 (5). pp. 466-472. ISSN 20103638

Rambat, Shuib and Fathi, Mohamad Syazli and Elgy, John (2013) The correction of commercial IMU data for single image registration. Positioning, 4 (2). pp. 210-214. ISSN 2150-8526

Ramlan Abd. Aziz, (2013) Bioprocess for semi-industrial production of immunomodulator polysaccharide pleuran by pleurotus ostreatus in submerged culture. Journal of Scientific and Industrial Research, 72 (11). pp. 655-662. ISSN 0022-4456

Ramlan Aziz, (2013) Pinch analysis for production planning in manufacturing industries. Chemical Engineering, 120 (8). pp. 40-45. ISSN 0009-2460

Rana, D. and Matsuura, T. and Kassim, Mohd. Azraai and Ismail, Ahmad Fauzi (2013) Radioactive decontamination of water by membrane processes - a review. Desalination, 321 . pp. 77-92. ISSN 0011-9164

Rawai, N. M. and Fathi, M. S. and Abedi, M. and Rambat, S. (2013) Cloud computing for green construction management. In: 2013 Third International Conference On Intelligent System Design And Engineering Applications (ISDEA).

Rose Alinda Alias, (2013) Scientometric assessment of engineering in Malaysians universities. Scientometrics, 96 (3). pp. 865-879. ISSN 0138-9130


Sabet, Maziyar and Soleimani, Hassan and Hassan, Azman and Ratnam, Chantara Thevy (2013) Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties. Journal of Polymer Engineering, 33 (7). pp. 651-657. ISSN 0334-6447

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2013) Electron-beam irradiation of low density polyethylene/ethylene vinyl acetate blends. Journal of Polymer Engineering, 33 (2). pp. 149-161. ISSN 0334-6447

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2013) Flammability and thermal characterization of aluminum hydroxide filled with LDPE. International Polymer Processing, 28 (4). pp. 393-397. ISSN 0930-777X

Sabet, Maziyar and Savory, R. M. and Hassan, Azman and Ratnam, Chantara Thevy (2013) The effect of tmptma addition on electron-beam irradiated ldpe, eva and blend properties. International Polymer Processing, 28 (4). pp. 386-392. ISSN 0930-777X

Sadeghi, F. and Kueh, A. and Vafaei, M. (2013) Dynamic response of composite footbridges under running pedestrian load. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Safaai Deris, (2013) An artificial immune system for solving production scheduling problems: a review. Artificial Intelligence Review, 39 (2). pp. 97-108. ISSN 0269-2821

Safaai Deris, (2013) An evolutionary firefly algorithm for the estimation of nonlinear biological model parameters. Plos One, 8 (3). ISSN 1932-6203

Safaai Deris, (2013) Machine allocation optimization in semiconductor assembly industry using a hybrid of bio-inspired and musical-harmony approach. ICIC Express Letters, 7 (3 A). pp. 839-845. ISSN 1881-803X

Safaai Deris, (2013) Multi-stage filtering for improving confidence level and determining dominant clusters in clustering algorithms of gene expression data. Computers In Biology and Medicine, 43 (9). pp. 1120-1133. ISSN 1048-25

Safaai Deris, (2013) A new hybrid bee evolution algorithm for parameter estimation in biological model. ICIC Express Letters, Part B: Applications, 4 (1). pp. 1-6. ISSN 2185-2766

Saktioto, (2013) Birefringence analysis of directional fiber coupler induced by fusion and coupling parameters. Optik, 124 (17). pp. 3063-3066. ISSN 0030-4026

Salleh, A. H. M. and Mohamad, M. S. and Deris, S. and Illias, R. Md. (2013) Identifying minimal genomes and essential genes in metabolic model using flux balance analysis. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Salleh, W. N. W. and Ismail, Ahmad Fauzi (2013) Effect of stabilization condition on PEI/PVP-based carbon hollow fiber membranes properties. Separation Science and Technology, 48 (7). pp. 1030-1039. ISSN 0149-6395

Salmiati, (2013) Morphological characterization of photosynthetic microbial granule from palm oil mill effluent (pome). Malaysian Journal of Analytical Sciences, 17 (3). pp. 445-453. ISSN 1394-2506

Sarip, A. R. and Musa, Md. Nor (2013) Friction analysis on vane of an existing and of a novel multi-vane rotary compressor. Applied Mechanics and Materials, 284-28 . pp. 763-767. ISSN 1662-7482

See Hong Heng, (2013) Electric field driven extraction of inorganic anions across a polymer inclusion membrane. Electroanalysis, 25 (8). pp. 1879-1886. ISSN 1040-0397

Sh-Hussain, S. and Kamarulafizam, I. and Noor, A. M. and Harris, A. A. and Oemar, H. and Yusoff, K. (2013) Classification of heart sound based on multipoint auscultation system. In: 2013 8th International Workshop on Systems, Signal Processing and Their Applications, WoSSPA 2013.

Shaharuddin Salleh, (2013) A note on integer-valued radial model in DEA. Computers & Industrial Engineering, 66 (1). pp. 199-200. ISSN 0360-8352

Shirazi, S. M. and Imran, H. M. and Akib, S. and Yusop, Zulkifli and Harun, Z. B. (2013) Groundwater vulnerability assessment in the melaka state of malaysia using drastic and GIS techniques. Environmental Earth Sciences, 70 (5). pp. 2293-2304. ISSN 1866-6280

Siti Hamidah Mohd. Setapar, (2013) Effect of parameter on forward extraction of amoxicillin by using mixed reverse micelles. Research Journal of Biotechnology, 8 (10). pp. 10-14. ISSN 0973-6263

Siti Hamidah Mohd. Setapar, (2013) Response surface methodology optimization of process parameters for silage production by effective microorganisms using central composite design. Research Journal of Biotechnology, 8 (9). pp. 13-16. ISSN 0973-6263

Siti Hamidah Mohd. Setapar, (2013) Solubilising water involved in amoxicillin extract using mixed aot/tween 85 reverse micelles. Research Journal of Chemistry and Environment, 17 (9). pp. 10-15. ISSN 0972-0626

Siti Zulaiha Hanapi, (2013) Agriculture wastes conversion for biofertilizer production using beneficial microorganisms for sustainable agriculture applications. Malaysian Journal of Microbiology, 9 (1). pp. 60-67. ISSN 2231-7538

Soltani, Mohammad and Kamyab, Hesam and El-Enshasy, Hesham Ali (2013) Molecular weight (mw) and monosaccharide composition (mc): two major factors affecting the therapeutic action of polysaccharides extracted from cordyceps sinensis-mini review. Journal of Pure and Applied Microbiology, 7 (3). pp. 1601-1613. ISSN 0973-7510

Sulaiman, H. and Said, N. M. and Ibrahim, A. and Alias, N. (2013) High performance visualization of human tumor detection using wtmm on parallel computing system. In: Proceedings - 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, CSPA 2013.

Sulaiman Mohd. Nor, (2013) Detection and mitigation framework of peer-to-peer traffic in campus networks. International Review On Computers and Software, 8 (7). pp. 1734-1743. ISSN 1828-6003

Sulaiman Mohd. Nor, (2013) Internet traffic classification algorithm based on hybrid classifiers to identify online games traffic. Jurnal Teknologi (Sciences and Engineering), 64 (3). pp. 55-60. ISSN 0127-9696

Sulaiman Mohd. Nor, (2013) Malware dection using ip flow level attributes. Journal of Theoretical and Applied Information Technology, 57 (3). pp. 530-539. ISSN 1992-8645

Sulaiman Mohd. Nor, (2013) A skype ML datasets validation and detection mechanism using snort rules and statistical approaches. Information Technology Journal, 12 (9). pp. 1746-1754. ISSN 1812-5638

Sulaiman Mohd. Nor, (2013) Sspc algorithm based on three different methods for online skype traffic classification. Journal of Theoretical and Applied Information Technology, 53 (3). pp. 422-429. ISSN 1992-8645

Sumeru, K. and Nasution, H. and Ani, F. N. (2013) Numerical study of ejector as an expansion device in split-type air conditioner. In: Applied Mechanics And Materials.


Talaiekhozan, Amirreza and Fulazzaky, Mohamad Ali and Keyvanfar, Ali and Andalib, Ramin and Abd. Majid, Muhd. Zaimi and Ponraj, Mohanadoss and Mohamad Zin, Rosli and Chew, Tin Lee and Shafaghat, Arezou and Hussin Ir, Mohd. Warid (2013) Identification of gaps to conduct a study on biological self-healing concrete. Journal of Environmental Treatment Techniques, 1 (2). pp. 62-68. ISSN 2309-1185

Tamar Jaya Nizar, (2013) Thinking faith imam al-shafi'i [pemikiran akidah imam al-syafi'i]. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 55-65. ISSN 0127-9696

Tareef Hayat Khan, (2013) Environmentally sustainable affordable design elements in housing in the context of Malaysia: focus on middle income group. Life Science Journal, 10 (3). pp. 1138-1148. ISSN 1097-8135

Tony Hadibarata, (2013) Microbial transformation and sorption of anthracene in liquid culture. Bioprocess and Biosystems Engineering, 36 (9). pp. 1229-1233. ISSN 1615-7591

Tony Hadibarata, (2013) A modified methylation method to determine fatty acid content by gas chromatography. Bulletin of The Korean Chemical Society, 34 (11). pp. 3239-3242. ISSN 0253-2964

Tony Hadibarata, (2013) Pancreatic effect of andrographolide isolated from andrographis paniculata (burm. F.) Nees. Pakistan Journal of Biological Sciences, 17 (1). pp. 22-31. ISSN 1028-8880


Usman, Sahnius (2013) Measuring arterial stiffness using photoplethysmogram. In: Advances in control Engineering - ACE 2013, 2013.

Uthman, Aveen and Sudin, Shahdan (2013) Controller gain tuning for road vehicle convoy system using model reference adaptive control method. International Journal of Research in Engineering and Science, 1 (4). pp. 1-10. ISSN 2320-9364


Viswanathan, Kodakkal Kannan and Syazwan, M.S. Farah and Mohamad, Mohd Nor and Lee, Janghyun (2013) Free vibration of symmetric angle-ply laminated annular circular plates. International Journal of Engineering and Technology, 5 (4). pp. 3554-3569. ISSN 2319-8613

Vakili, Amir Hossein and Selamat, M R and Moayedi, Hossein (2013) Effects of using pozzolan and portland cement in the treatment of dispersive clay. Scientific World Journal . ISSN 1537-744X


Wan Aizan Wan Abdul Rahman, (2013) Polyaniline-coated kenaf core and its effect on the mechanical and electrical properties of epoxy resin. Composite Interfaces, 20 (8). pp. 611-622. ISSN 0927-6440

Weigl, J. D. and Saidi, H. and Inayati, Inayati (2013) Design, testing and optimisation of a hydrogen fuel cell motorcycle for South East Asia. In: 2013 8Th International Conference And Exhibition On Ecological Vehicles And Renewable Energies, Ever 2013.


Yong Ee Ling, (2013) Kinetics of natural organic matter as the initiator, promoter, and inhibitor, and their influences on the removal of ibuprofen in ozonation. Ozone-Science & Engineering, 35 (6). pp. 472-481. ISSN 0191-9512

Yuliwati, E. and Ismail, A. F. (2013) Submerged ultrafiltration for minimizing energy process of refinery wastewater treatment. In: Advanced Materials Research.


Zainal Abdul Aziz, (2013) On accelerated mhd flows of second grade fluid in a porous medium and rotating frame. IAENG International Journal of Applied Mathematics, 43 (3). pp. 106-113. ISSN 1992-9978

Zainudin Abdul Rasid, (2013) The post-buckling behavior of the composite plates with embedded shape memory alloy subjected to combined loading using finite element method. International Review of Mechanical Engineering, 7 (6). pp. 1121-1127. ISSN 1970-8734

Zakiyudin, M. Z. and Fathi, M. S. and Rambat, S. and Mohd Tobi, S. U. and Kasim, N. and Ahmad Latiffi, A. (2013) The potential of context-aware computing for building maintenance management systems. In: Applied Mechanics And Materials.

Zen, Irina Safitri (2013) The UTM sustainable campus: institutionalise sustainability, living lab and sustainable energy management program. In: International Worksyop of UI Green Metric University World Ranking 2013, 2013.

Zulkifli Yusop, (2013) Level and transport pattern of faecal coliform bacteria from tropical urban catchments. Water Science and Technology, 67 (8). pp. 1822-1831. ISSN 0273-1223

Zulkifli Yusop, (2013) Paddy production and climate change variation in Selangor, Malaysia. Asian Social Science, 9 (14 SPL). pp. 55-62. ISSN 1911-2017

Zulkifli Yusop, (2013) Storm runoff quality and pollutant loading from commercial, residential, and industrial catchments in the tropic. Environmental Monitoring and Assessment, 185 (10). pp. 8321-8331. ISSN 0167-6369

This list was generated on Thu Sep 21 03:39:11 2017 +08.