Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | D | F | H | I | J | L | M | O | R | S | U | W | Z
Number of items at this level: 60.

A

A. M., Adnan and M. S., Fathi (2012) A review of value creation from procurement contracts and business models for district cooling systems in Malaysia. In: 8th Asia Pacific Structural Engineering and Construction Conference (APSEC), October 2-4, 2012, Shangri-La, Surabaya, Indonesia. (Submitted)

Abdul Rahman, Roselainy and Mason, John H. and Mohammad Yusof, Yudariah (2012) Factors affecting students’ change of learning behaviour. Procedia - Social and Behavioral Sciences, 56 (8). pp. 213-222. ISSN 1877-0428

Abdul Rahman, Sharifah Alwiah and Rambely, Azmin Sham and Ahmad, Rokiah Rozita (2012) Effect of load carriage on the backpack vibration system. In: Regional Conference on Automotive Research, ReCAR 2011. Trans Tech Publications, Switzerland, pp. 295-299. ISBN 978-303785413-6

Abdul Rahman, Sharifah Alwiah and Rambely, Azmin Sham and Ahmad, Rokiah Rozita (2012) Effect of load carriage on the backpack vibration system. Applied Mechanics And Materials, 165 . pp. 295-299.

Abdullah, Nasuha Lee and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah (2012) Challenges of quality management: a case study at Malaysian electronics manufacturing services company. Jurnal Teknologi (Sciences and Engineering), 59 (SUP. 2). pp. 29-32. ISSN 0127-9696

Ahmad, Norulhusna and Syed Yusof, Sharifah Kamilah and Fisal, Norsheila and Anwar, K. and Matsumoto, T. (2012) Soft-feedback MMSE equalization for non-orthogonal frequency division multiplexing (n-OFDM) signal detection. In: 2012 16th International ITG Workshop on Smart Antennas, WSA 2012. IEEE, New York, USA, pp. 248-255. ISBN 978-145771924-0

Ahmad, Robiah and Mohd. Samsuri, Saiful Farhan and Zakaria, Mohd. Zakimi (2012) Evapotranspiration prediction using system identification and genetic algorithm. In: The 31st IASTED Asian Conference on Modelling, Identification and Control, AsiaMIC 2012, 2-4 Apr 2012, Phuket, Thailand.

Alaghbandrad, Ali and Asnaashari, Ehsan and Nigel Preece, Christopher (2012) Problems and barriers of ICT utilization on Iranian construction sites: case study on the successful use of ICT in remote construction sites. Electronic Journal of Information Technology in Construction, 17 . pp. 93-102. ISSN 1874-4753

C

Che Hasan, Rozaimi and Ierodiaconou, Daniel and Laurenson, Laurie (2012) Combining angular response classification and backscatter imagery segmentation for benthic biological habitat mapping. Estuarine Coastal And Shelf Science, 97 . pp. 1-9. ISSN 0272-7714

Chelliapan, Shreeshivadasan (2012) Comparative biochemical composition study on bait polychaetes of Port Dickson waters. In: 3rd International Conference on Environmental Research and Technology (ICERT), 2012.

Chelliapan, Shreeshivadasan and Shahperi, Rafidah and Mohd. Aris, Maizatul Asnie (2012) Antibiotics in the environment: mini review. World Journal of Environmental Biosciences, 1 (1). pp. 1-4. ISSN 2277-8047

Chong, M. Y. and Chin, J. F. and Hamzah, Halim Shah (2012) Transfer of total productive maintenance practice to supply chain. Total Quality Management and Business Excellence, 23 (3-4). pp. 467-488. ISSN 1478-3363

D

Dan'azumi, S. and Shamsudin, Supiah (2012) Optimization of active to permanent pool volumes ratio for wet ponds in tropical catchments. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 353-356. ISBN 978-146730655-3

Daud, Yusof and Lucas, Margaret and Jamaludin, Khairur Rijal (2012) Finite element modelling in ultrasonic sheet metal forming. Advanced Materials Research, 445 . pp. 1-8. ISSN 1022-6680

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Ahmad, Fauziah Sh. (2012) Marketing constraints to real estate sector and improvement measures : case study of Turkey. Energy Education Science and Technology Part B : Social and Educational Studies, 4 (4). pp. 2595-2600. ISSN 1308-772X

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Ahmad, Fauziah Sh. (2012) Marketing constraints to real estate sector and improvement measures: case study of Turkey. Energy Education Science and Technology Part B: Social and Educational Studies, 4 (4). pp. 2595-2600. ISSN 1308-7711

Durdyev, Serdar and Ismail, Syuhaida (2012) The construction industry of Turkmenistan and its role in the economy. In: 2012 2nd International Conference on Applied Social Science (Icass 2012), Vol 1. Information Engineering Research, USA, pp. 107-112. ISBN 978-161275006-4

Durdyev, Serdar and Ismail, Syuhaida (2012) Role of the construction industry in economic development in Turkmenistan. Energy Education Science and Technology Part A : Energy Science and Research, 29 (2). pp. 883-890. ISSN 1308-772X

F

Fahami, S. M. H. and Zamzuri, Hairi and Mazlan, Saiful Amri and Zakaria, M. A. (2012) Modeling and simulation of vehicle steer by wire system. In: SHUSER 2012 - 2012 IEEE Symposium on Humanities, Science and Engineering Research. IEEE, New York, USA, pp. 765-770. ISBN 978-146731310-0

Fathi, Mohamad Syazli and Abedi, Mohammad and Mirasa, Abdul Karim (2012) Construction industry experience of industralised building system in Malaysia. In: Ninth International Congress on Civil Engineering ((ICCE), Isfahan University of Technology (IUT), May 8-10, 2012, Isfahan, Iran. (Submitted)

Fathi, Mohamad Syazli and Abedi, Mohammad and Rawai, Shakila (2012) The potential of cloud computing technology for construction collaboration. International Journal of Applied Mechanics and Materials, 174 . 1931 -1934. ISSN 1660-9336

Fathi, Mohamad Syazli and Abedi, Mohammad and Rawai, Shakila (2012) The potential of cloud computing technology for construction collaboration. In: 2nd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2012), May 25-27, 2012, YanTai, China. (Submitted)

Fathi, Mohamad Syazli and Rawai, Norshakila and Abedi, Muhammad (2012) Mobile information system for sustainable project management. International Journal of Applied Mechanics and Materials, 178 . pp. 2690-2693. ISSN 1660-9336

Firouzi, Morteza and Shamsudin, Supiah and Nekooie, Mohammad Ali and Abd. Rahis, Abdul Jamil and Taherkhani, R. and Mohamad, Mohamad Ibrahim (2012) Pervious concrete texture analysis for infiltration rate evaluation. Advanced Science Letters, 13 (1). pp. 877-878. ISSN 1936-6612

H

Habidin, Nurul Fadly (2012) Structural analysis and tool for lean six sigma, strategic control systems and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Technology.

Hansen, Sune Balle and Olsen, Stig Irving and Ujang, Zaini (2012) Greenhouse gas reductions through enhanced use of residues in the life cycle of Malaysian palm oil derived biodiesel. Bioresource Technology, 104 . pp. 358-366. ISSN 0960-8524

Haron, Habibah @ Norehan and Mohamed Shahar, Awaluddin and Puteh, Marlia and Harun, Hafizah (2012) Does motivation affect students’ understanding and performance in engineering statics? In: International Conference on Teaching and Learning in Higher Education (ICTLHE 2012).

Harun, Mohd. Ruzi and Muhamad, N. and Sulong, Abu Bakar and Mohamad Nor, N. H. and Jamaludin, K. R. (2012) Metal injection moulding of ZK60 magnesium alloy powder using palm stearin based binder system. Advanced Materials Research, 445 . pp. 374-379. ISSN 1022-6680

Hassan, Mohamad Zaki and Cantwell, W. J. (2012) Strain rate effects in the indentation behavior of foam-based sandwich structures. Journal of Composite Materials, 46 (10). pp. 1191-1199. ISSN 0021-9983

I

Ismail, Izwan and Mazlan, Saiful Amri and Zamzuri, Hairi and Olabi, Abdul G. (2012) Fluid-particle separation of magnetorheological fluid in squeeze mode. Japanese Journal of Applied Physics, 51 (6). pp. 301-305. ISSN 0021-4922

Ismail, Izwan and Mazlan, Saiful Amri and Zamzuri, Hairi and Olabi, Abdul Ghani (2012) Investigation of mechanical performance of squeezed magnetorheological fluid using response surface method. Advanced Materials Research, 445 . pp. 542-547. ISSN 1022-6680

Ismail, Syuhaida and Durdyev, Serdar (2012) Pareto analysis of on-site productivity constraints and improvement techniques in construction industry. Journal of Scientific Research and Essay, 7 (4). pp. 1-10. ISSN 1992-2248

J

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ahmad, Sufizar and Irwan Ibrahim, Mohd. Halim and Mohd. Nor, Nor Hafiez and Harun, Mohd. Ruzi and Md. Daud, Mohd. Yusof (2012) Optimizing the sintering parameter of metal injection molding compact using robust engineering technique. Advanced Materials Research, 445 . pp. 357-361. ISSN 1022-6680

Jamaludin, Khairur Rijal and Adenan, Mohd. Shahriman and Md. Daud, Mohd. Yusof and Abd. Raman, Norazmein (2012) Delaminating control on drilling the medium density fiber board with robust optimization. Jurnal Teknologi, 59 . pp. 95-98. ISSN 0127–9696 (Print) ; 2180-3722 (Electronic)

L

Lim, Meng Hee and Leong, M. S. and Ngui, W. K. (2012) Detection of early changes in rotor dynamics of rotating machinery based on wavelet analysis. In: 9th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2012, 12-14 Jun 2012, United Kingdom.

M

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Fayyaza, Abdolali and Yunn, Heng Shye (2012) Ball milling of WC-CO powder as injection molding feedstock. Applied Mechanics And Materials, 110-11 . pp. 1425-1430. ISSN 1660-9336

Masrom, Maslin and Ibrahim, Suahimi (2012) Opcodes histogram for classifying metamorphic portable executables malware. In: The International Conference on E-Learning and E-Technologies in Education (ICEEE 2012), 24-26 Sept 2012, Lodz, Poland.

Masrom, Maslin and Jamal, Nadia and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Abdullah, Muhammad Madi and Hooi, Lai Wan (2012) Ethical issues in information and communication technologies : case of Malaysian primary schools. In: 2012 International Conference on Innovation, Management and Technology Research (ICIMTR2012), 21-22 May 2012, Melaka, Malaysia.

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Hooi, Lai Wan and Jamal, Nadia (2012) Ethical issues in the use of information and communication technology in Malaysian primary schools. In: International Conference On Arts, Social Sciences And Technology 2012 (ICAST 2012), 3-5 Mar 2012, Penang, Malaysia.

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Hooi, Lai Wan and Jamal, Nadia (2012) Information and communication technology issues: a case of Malaysian primary school. ARPN Journal of Science and Technology, 2 (5). pp. 504-511. ISSN 2225-7217

Md. Daud, Mohd. Yusof and Jamaludin, Khairur Rijal and Ramanra, Jeyanthi Vengatta (2012) Human factor issue in quality management. Jurnal Teknologi, 59 (n/a). pp. 35-38. ISSN 0127-9696 (Print); 2180-3722 (Electronics)

Mohamed, Norliza and Idrus, Sevia Mahdaliza and Mohammad, Abu Bakar and Yaakob, Syamsuri (2012) Development and demonstration of 12.4 Ghz sige HBT mixer for radio over fiber applications. WSEAS Transactions on Circuits and Systems, 11 (10). pp. 339-349. ISSN 1109-2734

Mohd. Aris, Siti Armiza and Taib, Mohd. Nasir and Sulaiman, Norizam (2012) Classification of frontal alpha asymmetry using k-Nearest Neighbor. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 74-78. ISBN 978-836295443-8

Mohd. Noor, Norliza and Azmi, M. H. and Rijal, O. M. and Dahlan, Z. and Kassim, R. M. and Yunus, A. (2012) Investigating solidity as a shape feature in the selection of HRCT thorax images. In: 2012 IEEE EMBS conference on Biomedical Engineering & Sciences (IECBES 2012).

Mohd. Rijal, Omar and Ebrahimian, Hossien and Mohd. Noor, Norliza (2012) Determining features for discriminating PTB and normal lungs using phase congruency model. In: Proceedings - IEEE-EMBS International Conference on Biomedical and Health Informatics: Global Grand Challenge of Health Informatics, BHI 2012. IEEE, New York, USA, pp. 341-344. ISBN 978-145772177-9

Munusamy, Somasundram (2012) The effect of organizational process climate on organizational citizenship behavior of employees in software development organization through organizational commitment. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Technology.

Md. Yusoff, Nelidya and Abas, Ahmad Fauzi and Hitam, Salasiah and Mahdi, Mohd. Adzir (2012) Dual-stage l-band erbium-doped fiber amplified with distributed pumping from single pump laser. Optics Communications, 28 (6). p. 1383. ISSN 0030-4018

O

Oehlers, Deric John and Muhamad, Rahimah and Mohamed Ali, M. S. (2012) Serviceability flexural ductility of FRP RC beams: a discrete rotation approach. Construction and Building Materials, 49 . pp. 974-984. ISSN 0950-0618

Omar M., Rijal and A. Abdullah, Norli and M. Isa, Zakiah and M. Noor, Norliza and Tawfiq, Omar F. (2012) A probability distribution of shape for the dental maxillary arch using digital images. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 5420-5423. ISSN 1557-170X

R

Rahimi, Nik Mohd. and Yusri, Ghazali and Wan Zakaria, Wan Normeza (2012) Listening skills profile among business management students. African Journal of Business Management, 6 (5). pp. 1945-1949. ISSN 1993-8233

S

Said, Mohd. Noor (2012) A model of human factors impacting on human error in aviation maintenance. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Technology.

Shamsuddin, Supiah and Ahmad, Aneziatun A. P. and Ab Rahman, Azmi (2012) Phosphorus loadings and eutrohication status uncertainty using fuzzy logic. In: World Congress on Water, Climate and Energy (WCE 2012).

Shamsudin (2012) Uncertainty of rainfall characteristics with minimum inter-event time definition for a raingauge station in Johor, Malaysia. Journal Of Environmental Hydrology, 20 . pp. 1-8. ISSN 1058-3912

Shamsudin, Supiah and Mohd. Darom, Abd. Rashid and Mohamad, Irma Norazurah and Ab. Rahman, Azmi (2012) Detention pond sediment accumulation prediction using Monte Carlo simulation. American Journal Of Environmental Sciences, 8 (1). pp. 25-34. ISSN 1553-345X

U

Ujang, Norsidah and Shamsuddin, Shuhana (2012) The influence of legibility on attachment towards the shopping streets of Kuala Lumpur. Pertanika Journal of Social Science and Humanities, 20 (1). pp. 81-92. ISSN 0128-7702

W

Wahi, Azizah and Muhamad, Norhamidi and Jamaludin, Khairur R. and Rajabi, Javad and Madraky, Abbas (2012) Optimization of injection molding parameters by data mining method in PIM process. Jurnal Teknologi (Sciences and Engineering), 59 (SUP. 2). pp. 193-196. ISSN 0127-9696

Wan Zakaria, Wan Normeza and Buang, Nor Aishah (2012) Analisis struktur teks dalam kemahiran membaca teks ekonomi. GEMA Online TM Journal of Language Studies, 12 (1). pp. 295-309. ISSN 1675-8021

Z

Zakaria, Zarabizan and Ismail, Syuhaida and Md. Yusof, Aminah (2012) Cause and impact of dispute and delay the closing of final account in Malaysia construction industry. Journal of Southeast Asian Research, 2012 (975385). pp. 1-12. ISSN 1947-3788

Zamzuri, Hairi and Zolotas, Argyrios and Doodall, Roger and Mazlan, Saiful Amri (2012) Advances in tilt control design of high-speed railway vehicles: a study on fuzzy control methods. International Journal of Innovative Computing Information and Control, 8 (9). pp. 6067-6080. ISSN 1349-4198

Zulkarnain, Noraishikin and Imaduddin, Fitrian and Zamzuri, Hairi and Mazlan, Saiful Amri (2012) Application of an active anti-roll bar system for enhancing vehicle ride and handling. In: 2012 IEEE Colloquium on Humanities, Science and Engineering Research (CHUSER 2012).

This list was generated on Fri Mar 29 05:01:06 2024 +08.