Items where Year is 2012

A

Abd. Rahman, Nur Fauzana (2012) Comparative study on the composting using natural and effective microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Khalil, H. P. S. and Firoozian, P. and Jawaid, M. and Akil, H. M. and Hassan, Azman (2012) Preparation of activated carbon filled epoxy nanocomposites Morphological and thermal properties. Journal of Thermal Analysis and Calorimetry, 113 (2). pp. 623-631. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Abdullah, Isah Umar (2012) Heat exchanger network operating and capital costs trade-off considering individual stream temperature difference contribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Bakar, Nurul Huda and Deraman, Karim and Hussin, R. and W. Shamsuri, W. Nurulhuda and Mansor, Faizal and Ibrahim, Zuhairi and Ismail, Bakar (2012) Hydrophobic silica thin films by sol-gel processing and spin coating technique at low temperature. Malaysian Journal of Fundamental and Applied Sciences, 8 (1). pp. 55-59. ISSN 1823-626X

C

Chong, Woon Chan (2012) Effect of exhaust gas stream recirculation on emission from a palm oil mill boiler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

D

Dehghani, Alireza and Ardekani, Sara Madadi and Wahit, Mat Uzir and Hassan, Azman and Al-Maadeed, Mariam A. (2012) Study On mechanical properties and crystallization behavior of poly (ethylene terephthalate) reinforced date palm leaf fiber montmorrilonite nanocomposites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8).

F

Faisal Ghazali, Mohd. Nazlee (2012) CE-P24: cellulose degradation and electricity generation using microbial fuel cell (MFC) by locally isolated gram negative bacillus. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 Jul 2012, Langkawi, Kedah.

H

Hashim, Shahrir (2012) Synthesis and characterization of polymer hydrogel composites based on poly acrylic acid grafted cotton microfiber. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 Mar 2012, Vistana Hotel, Penang.

Hegde, Chitrakar and M. Isloor, Arun and Padaki, Mahesh and Ismail, Ahmad Fauzi and Lau, Woei Jye (2012) New CPS-PPEES blend membranes for CaCI2 and NaCI rejection. Membrane Water Treatment, An International Journal, 3 (1). pp. 25-34. ISSN 2092-7037

Hezaveh, Hadi (2012) Development of novel k-carrageenan based hydrogel nanocomposites to control gastrointestinal release of modeled drug. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

I

Ibrahim, Amgad Ahmed Aly (2012) Proton conducting membrance by radiation induced crafting of 1- vinylimidazole onto poly (ethylene - co - tetrafluoro etylene) film and phoshoric acid doping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Idham, Zuhaili and Muhamad, Ida Idayu and Sarmidi, Mohamad Roji (2012) Degradation kinetics and color stability of spray-dried encapsulated anthocyanins from Hibiscus Sabdariffa L. Journal of Food Process Engineering, 35 (4). pp. 522-542. ISSN 0145-8876

Idroas, Mariani (2012) Conceptual design of ultrasonic instrumentation system for Pipeline Inspection Gauge (Pig) to monitor pipeline internal corrosion. In: International Conference On Science And Technology, 2012.

Idroas, Mariani (2012) Conceptual design of ultrasonic tomographic instrumentation system for monitoring flaw in pipeline coating. In: International Conference Chemical And Bioprocess Engineering, 2012.

Ishak, Iryatie (2012) Characterization of purple anthocyanin as pH colour indicator and antioxidant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

J

Jaafar, Juhana and Ismail, Ahmad Fauzi (2012) The effect of nanoclay loading on physico-chemical properties of SPEEK electrolyte membrane. Jurnal Teknologi, 59 (n/a). pp. 53-57. ISSN 2180-3722 (Print); 0127–9696 (Electronic)

Jawaid, Mohammad and Abdul Khalil, H. P. S. and Hassan, Azman and Abdallah, Elgorban (2012) Bi-layer hybrid biocomposites: chemical resistant and physical properties. BioResources, 7 (2). pp. 2344-2355. ISSN 1930-2126

K

Kamarudin, Khairul Sozana Nor (2012) Carbon dioxide removal using N-Methyldiethanolamine promoted by piperazine in emulsion liquid membrane. In: Proceeding of 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Kamarudin, Khairul Sozana Nor (2012) Characteristics of amine – grafted on kenaf (Hibiscus Cannabinus L.) core fiber for capturing CO2 by pressure Swing Adsorption (PSA) system. In: Proceeding of 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Kazemzadeh Farizhandi, Amir Abbas (2012) Plant protein hydrolysates as a supplement for medium of human skin fibroblast 1184 cell culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

L

Lau, Woei Jye and Ismail, Ahmad Fauzi and Misdan, Nurasyikin and Kassim, Mohd. Azraai (2012) A recent progress in thin film composite membrane: a review. Desalination, 287 . pp. 190-199. ISSN 0011-9164

M

Maarasyid, Cici (2012) A graphical approach for cost targeting of heat recovery networks with mixed heat exchanger types. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Maftoun, Parisa (2012) Efficient exopolysaccharaide production by pleurotus ostreatus in submerged culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mayahi, Alireza (2012) Temperature effect on sulfonatedpoly(etheretherketone)with charged surface modifying macromolecule for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md Noor, Nur Aminatun Naenah (2012) Characterization of bio wax substrate from taro leaf as decontamination solution agent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Kasmani, Rafizian (2012) Gas explosion in closed pipe with and without 90 degree bends. In: 26th Symposium of Malaysian Chemical Engineers (SOMchE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012).

Md. Kasmani, Rafiziana and H. Hassim, Mimi and R. Ali, Roshafima (2012) Fast turbulent flames and high overpressures in duct-vented gas explosion. In: 26th Symposium of Malaysian Chemical Engineers (SOMchE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012).

Mohamad Said, Khairul Anwar (2012) Characterization of adding 2,4,6-triaminopyrimidine as additive in silver impregnated of hollow fiber and flat sheet membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

S

Samsuri, Ariffin and Herianto, Herianto and Setyowiyoto, Jarot (2012) Petrophysics study of sand stone core to the accuracy of ultrasonic pulse velocity. In: Conference.

Sarmidi, Mohamad Roji (2012) Food is our medicine. In: Professorial Inaugural Lecture "Food is Our Medicine", 26 September 2012, Senate Hall, Universiti Teknologi Malaysia, Johor Bahru.

T

Tang, Ing Hua and Sundari, Rita (2012) Fabrication and characterization of ferrites (Mg and Mn)based on FTIR, XRD, SEM and TEM. Malaysian Journal of Fundamental & Applied Sciences, 8 (3). pp. 149-154. ISSN 1823-626X

W

Wan Abd. Rahman, Wan Aizan (2012) Mechanical properties of poly lactic acid/kenaf core biocomposite. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Z

Zakaria, Zainal (2012) A study of continuous flow gas lift system using Cfd. In: Conference.

Zakaria, Zuriati and G.H.N., Farahani and Aini Kuntom, Aini Kuntom and B.S., Ismail (2012) Persistence of carbofuran in Malaysian waters. American-Eurasian Journal of Agricultural & Environmental Science, 12 (5). pp. 616-623. ISSN 1818-6769