Items where Year is 2011

Article

Ahmad, Sufizar and Muhamad, Norhamidi and Muchtar, Andastuti and Sahari, Jaafar and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan and Mohamad Nor, Nor Hafiez (2011) Taguchi Method for the determition of optimised sintering parameters of titanium alloy foams. Advanced Materials Research, 264-26 . pp. 1731-1736. ISSN 1022-6680

Alkarimiah, Rosni and Mahat, Siti Baizura and Yuzir, Ali and Md. Din, Mohd. Fadhil and Chelliapan, Shreeshivadasan (2011) Performance of an innovative multi-stage aerobic reactor during start-up period. African Journal of Biotechnology, 10 (54). pp. 11294-11302. ISSN 1684-5315

Bashari Rad, B. and Masrom, M. and Ibrahim, S. and Ibrahim, S. (2011) Morphed virus family classification based on opcodes statistical feature using decision tree. Communications in Computer and Information Science, 251 (1). pp. 123-131. ISSN 1865-0929

Che Hasan, Rozaimi and Ierodiaconou, Daniel and Laurenson, Laurie (2011) Combining angular response classification and backscatter imagery segmentation for benthic biological habitat mapping. Estuarine, Coastal and Shelf Science, 97 . pp. 1-9. ISSN 0272-7714

Chelliapan, S. and Yuzir, A. and Md. Din, M. F. and Sallis, P. J. (2011) Anaerobic pre-treatment of pharmaceutical wastewater using packed bed reactor. International Journal of Chemical Engineering and Applications, 2 (1). pp. 32-37. ISSN 2010-0221

Chelliapan, Shreeshivadasan and Sallis, Paul J. (2011) Application of anaerobic biotechnology for pharmaceutical wastewater treatment. IIOAB Journal, 2 (1). pp. 13-21. ISSN 0976-3104

Chelliapan, Shreeshivadasan and Wilby, T. and Sallis, P. J. and Muhammad Yuzir, Muhamad Ali (2011) Tolerance of the antibiotic tylosin on treatment performance of an up-flow anaerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chelliapan, Shreeshivadasan and Wilby, Thomas and Muhammad Yuzir, Muhamad Ali and Sallis, Paul J. (2011) Influence of organic loading on the performance and microbial community structure of an anaerobic stage reactor treating pharmaceutical wastewater. Desalination, 271 (1-3). pp. 257-264. ISSN 0011-9164

Chelliapan, Shreeshivadasan and Wilby, Thomas and Sallis, Paul J. (2011) Effect of hydraulic retention time on up-flow anaerobic stage reactor performance at constant loading in the presence of antibiotic tylosin. Brazilian Journal of Chemical Engineering, 28 (1). pp. 51-61. ISSN 0104-6632

Chelliapan, Shreeshivadasan and Wilby, Thomas and Sallis, Paul J. and Yuzir, Ali (2011) Tolerance of the antibiotic tylosin on treatment perfomance of an up-flow aerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chelliapan, Shreeshivadasan and Wilby, Thomas and Yuzir, Ali and Sallis, Paul J. (2011) Influence of organic loading on the performance and microbial community structure of an aerobic stage reactor treating pharmaceutical wastewater. Desalination, 271 . pp. 257-264. ISSN 0011-9164

Dolah, Rozzeta and Musa, Hamidon and Amrin, Astuty (2011) Etching performance improvement on semiconductor silicon wafers with redesigned etching drum. Jurnal Teknologi, 55 . pp. 53-65. ISSN 0127-9696

Harun, M. R. and Muhamad, Norhamidi and Sulong, Abu Bakar and Nor, Nor H. M. and Jamaludin, Khairur R. (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. Advanced Materials Research, 230-23 . pp. 1199-1203. ISSN 1022-6680

Ibrahim, M. H. I. (2011) Optimization of micro metal injection molding ss 316l for the highest green strength by using Taguchi Method. Advanced Materials Research, 264-26 . pp. 135-140. ISSN 1022-6680

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding with multiple performance characteristics using grey relational grade. Chiang Mai Journal Of Science, 38 (2). pp. 231-241. ISSN 0125-2526

Jamaludin, Khairur R. and Muhamad, Norhamidi and Rahman, M. N. Ab. and Ahmad, S. and Ibrahim, Mohd. H. I. and Nor, Nor H. M. and Harun, M. R. and Daud, M. Y. M. (2011) Multiple performance optimization for the best metal injection molding green compact. Journal of Applied Sciences, 11 (9). pp. 1663-1667. ISSN 1812-5654

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Mohamad No, Nor Hafiez (2011) Orthogol array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Abolhasani, Hooman and Murtadha, Hadi and Ab. Rahman, Mohd. Nizam (2011) An influence of a binder system to the rheological behaviour of the SS316L metal injection molding (MIM) feedstock. Advanced Materials Research, 264-26 . pp. 554-558. ISSN 1022-6680

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Abolhasani, Hooman and Murtadhahadi, Murtadhahadi and Ab. Rahman, Mohd. Nizam (2011) An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock. Advanced Materials Research, 264 . pp. 554-558. ISSN 1662-8985

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Mohd. Nor, Nor Hafiez and Daud, Yusof (2011) Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact. Scientific Research and Essays, 6 (21). pp. 4532-4538. ISSN 1992-2448

Khairuddin, Uswah and Yusof, Rubiyah and Khalid, Marzuki and Cordova, F. (2011) Optimized feature selection for improved tropical wood species recognition system. ICIC Express Letters, Part B: Applications, 2 (2). pp. 441-446. ISSN 2185-2766

Mad Kaidi, Hazilah and Ibrahim, Muhammad (2011) Hybrid ARQ type I based on convolutional code. Jurnal Teknologi 54, 54 . pp. 45-54. ISSN 0127–9696 (Print); 2180-3722 (Online)

Mazlan, Saiful Amri and Ismail, Izwan and Zamzuri, Hairi and Abdul Fatah, Abdul Yasser (2011) Compressive and tensile stresses of magnetorheological fluids in squeeze mode. International Journal Of Applied Electromagnetics And Mechanics, 36 (4). pp. 327-337. ISSN 1383-5416

Mazlan, Saiful Amri and Ismail, Izwan and Fathi, Mohamad S. and Rambat, Shuib and Anis, Samsol F. (2011) An experimental investigation of magnetorheological (MR) fluids under quasi-static loadings. Key Engineering Materials, 495 . pp. 285-288. ISSN 1662-9795

Mohamad Nor, N. H. and Muhamad, Norhamidi and Ariffin, A. K. and Ruzi, M. and Jamaludin, Khairur R. and Sufizar, A. (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan (2011) Characterization of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan (2011) Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Mohamad Nordin, Nor Asikin and Adn, Dia Farha and Alias, Aznira and Wan Isahak, Wan Norroslam and Salimon, Jumat and Yarmo, Mohd. Ambar and Kamaruddin, Rose Aini (2011) New silica supported HCLO4 as efficient catalysts for estolide synthesis from oleic acid. Advanced Materials Research, 173 . pp. 140-145. ISSN 1022-6680

Mohd. Isa, Zakiah and Tawfiq, Omar Farouq and Abdullah, Norli Anida and Mohd. Noor, Norliza and Mohd. Rijal, Omar (2011) Statistical clustering of maxillary dental arches. Scientific Research and Essays, 6 (13). pp. 2710-2719. ISSN 1992-2248

Muazu, M. A. (2011) Parametric evaluation of tree root water-uptake effect on ground movement. International Journal of Physical Sciences, 6 (14). pp. 3468-3474. ISSN 1992-1950

Razak, Khamarrul Azahari and Straatsma, Menno W. and van Westen, Cees J. and Malet, Jean Philippe and de Jong, Steven M. (2011) Airborne laser scanning of forested landslides characterization: terrain model quality and visualization. Geomorphology, 126 (1-2). pp. 186-200. ISSN 0169-555X

Salleh, Zulhisyam and Mazlan, Erita M. and Mazlan, Saiful Amri and Hassan, Norzainariah A. and Patakor, Fizatul A. (2011) A case study on the efficacy of technical laboratory safety in polytechnic. International Journal of Humanities and Social Science, 5 (5). pp. 632-636. ISSN 2010-376X

Samsuri, S. and Ismail, Z. and Ahmad, R. (2011) User-centered evaluation of privacy models for protecting personal medical information. Communications in Computer and Information Science, 251 (1). pp. 301-309. ISSN 1865-0929

Shaamala, A. and Abdullah, S. M. and Maf, A. A. (2011) The effect of DCT and DWT domains on the robustness of genetic watermarking. Communications in Computer and Information Science, 251 (1). pp. 310-318. ISSN 1865-0929

Shamsuddin, Shuhana and Abd. Latip, Nurul Syala and Sulaiman, Ahmad Bashri and Ujang, Norsidah and Alias, Nursyahida Alfath and Chelliapan, Shreeshivadasan and Azlan, Nurul Azreen (2011) Historic waterfront and the sense of place: the case of two unesco world heritage sites of Malaysia. International Journal of Arts and Sciences, 4 (17). pp. 191-211. ISSN 1944-6934

Shamsudin, Supiah and Abdul Rahman, Azmi and Mohd. Darom, Abd. Rashid (2011) Determination of detention pond sediment loads using monte carlo simulation, Malaysia. Journal of Environmental Hydrology, 19 . pp. 1-9. ISSN 1058-3912

Shamsudin, Supiah and Dan’azumi, Salisu and Ab. Rahman, Azmi (2011) Uncertainty analysis of HEC-HMS model parameters using Monte Carlo simulation. International Journal of Modeling and Simulation, 31 (4). ISSN 0228-6203

Vanany, Iwan and Shaharoun, Awaluddin Mohamed (2011) The comprehensive framework for RFID justification in healthcare. International Business Management, 5 (2). pp. 76-84. ISSN 1993-5250

Wahab, Yussof and Othaman, Zulkafli and Ismail, Abd. Khamim and Hamidinezhad, Habib (2011) Synthesis and analysis of silicon nanowire below Si-Au eutectic temperatures using very high frequency plasma enhanced chemical vapor deposition. Applied Surface Science, 257 (21). pp. 9188-9192. ISSN 0169-4332

Yuzir, Ali and Chelliapan, Shreeshivadasan and Sallis, Paul J. (2011) Influence of step increases in hydraulic retention time on (RS)-MCPP degradation using an anaerobic membrane bioreactor. Bioresource Technology, 102 (20). pp. 9456-9461. ISSN 0960-8524

Book Section

Abdul Fatah, Abdul Yasser and Yusuff, R. M. and Aziz, F. A. and Zulkifli, N. (2011) Simulation of "time-based" versus "sensor-based" traffic light system. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. IEEE, Xi'an, pp. 789-792. ISBN 978-161284485-5

Abdul Manaf, Azizah and Mohd. Daud, Salwani and Masrom, Maslin and Lashkari, Arash Habibi (2011) Security evaluation for graphical password. In: Communications in Computer and Information Science. Springer-Verlag, Dijon, pp. 431-444. ISBN 978-364221983-2

Ayat, M. and Masrom, Maslin and Sahibuddin, Shamsul and Sharifi, M. (2011) Issues in implementing IT governance in small and medium enterprises. In: 2011 Second International Conference on Intelligent Systems, Modelling and Simulation (ISMS). IEEE, Los Alamitos, California Washington, pp. 197-201. ISBN 978-076954336-9

Haron, Habibah Norehan and Shaharoun, Awaluddin Mohamed (2011) Self-regulated learning, students' understanding and performance in engineering statics. In: 2011 IEEE Global Engineering Education Conference, EDUCON 2011. IEEE, Amman, pp. 450-459. ISBN 978-1-61284-643-9

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding SS 316L for the highest green strength by using Taguchi method. In: Advances in Materials and Processing Technologies II. Advanced Materials Research, 264-26 . Trans Tech Publications, Switzerland, pp. 135-140. ISBN 978-303785053-4

Jamaludin, Khairur Rijal and Harun, M. R. and Muhamad, N. and Sulong, A. B. and Mohamad Nor, N. H. (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. In: Advanced Materials Research. Scientific.net, pp. 1199-1203. ISBN 978-303785133-3

Radin Salim, Kamilah and Puteh, Marlia and Mohd. Daud, Salwani (2011) Levels of practical skills in basic electronic laboratory: students' perceptions. In: 2011 IEEE Global Engineering Education Conference (EDUCON). IEEE, USA, pp. 231-235. ISBN 978-161284643-9

Shamsudin, Supiah and Ab. Rahman, Azmi (2011) Fitting the distributions of wet spell duration with probability models. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, USA, 001-006. ISBN 978-145770005-7

Zamzuri, Hairi and Zainal Abidin, Mastura Shafinaz and Ramli, M. S. A. (2011) Tracking human movement in office environment using video processing. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, Kuala Lumpur, pp. 1-6. ISBN 978-145770003-3

Conference or Workshop Item

Ahmad, Nurul Huda and Muhamad, Sallehuddin (2011) Teaching aircraft design with flyable prototype. In: The 4th International Conference On Product Design & Development.

Bakhary, Norhisham (2011) Detection of concrete spalling using changes in modal flexibility. In: International Conference On Structures And Building Materials (Icsbm 2011).

Fathi, Mohd. Syazli (2011) Developing mitigation measures for delays in building construction projects : a case study in the city of Isfahan, Iran. In: International Construction Business & Management Symposium (Icbms 2011).

Ismail, Syuhaida (2011) Key performance indicators for public infrastructure project in Malaysia. In: The 12Th International Conference On Qir (Quality In Research) 2011.

Ismail, Syuhaida (2011) Procurement of relational contract in Malaysia: problems and challenges. In: 29th Conference Of The Asean Federation Of Engineering Organisations (CAFEO 29).

Jamaludin, Khairur Rijal (2011) Minimizing delaminating on medium density fiber board by Taguchi Method. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Jamaludin, Khairur Rijal (2011) Optimizing the sintering parameter of metal injection molding compact using robust engineering technique. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Lashkari, Arash Habibi and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) A survey on image steganography algorithms and evaluation. In: The International Conference on Digital Information Processing and Communications (ICDIPC), 7-9 July 2011, VSB-Technical University of Ostrava, Ostrava, Czech.

Lim, Meng Hee (2011) Operational deflection shape analysis of rotor casing to diagnose transient blade rubbing faults. In: 14th Asia Pacific Vibration Conference (APVC 2011).

M., Abedi and M. S., Fathi and M. F. , Mohammad (2011) Major causes of construction delays under client category and contractor category. In: The First Iranian Students Scientific Conference in Malaysia, Apr 9 & 10, 2011, UPM, Malaysia. (Submitted)

M., Abedi and M. S. , Fathi and M. F., Mohammad (2011) Effects of construction delays on construction project objectives. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia. (Submitted)

Masrom, Maslin (2011) Enablers and barriers for e-commerce success in Malaysian small and medium enterprises. In: International Conference On Business And Information (BAI 2011).

Masrom, Maslin (2011) IT governance and small medium enterprise. In: 2011 International Conference On Computer And Business Management (ICCBM 2011).

Masrom, Maslin (2011) Metamorphic virus detection in portable executables using opcodes statistical feature. In: The 2nd International Scientific Conference (Icaseit).

Masrom, Maslin (2011) Morphing engines classification by code histogram. In: Symposium On Information And Computer Science (Ics) 2011.

Mazlan, Saiful Amri and Ismail, Izwan and Fathi, Mohamad S. and Rambat, Shuib and Anis, Samsol F. (2011) An experimental investigation of magnetorheological (MR) fluids under quasi-static loadings. In: International Conference For Materials And Applications For Sensors And Tranducers (ICMAST 2011).

Mazlan, Saiful Amri (2011) Experimental characterization of magnetorheological fluid in squeeze mode. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Md. Daud, Mohd. Yusof (2011) Finite element modelling in ultrasonic sheet metal forming. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Mohamed, Azman (2011) Interaction of underside shaped concrete blocks and beding sand. In: Seminar Penyelidikan Kejuruteraan Awam (Sepka 2011).

Mohd. Aris, Siti Armiza and Taib, Mohd. Nasir and Lias, Sahrim and Sulaiman, Norizam (2011) Feature extraction of EEG signals and classification using FCM. In: UKSim 13th International Conference on Modelling and Simulation, UKSim 2011, 30 March 2011 - 1 April 2011, Cambridge, UK.

Sulaiman, Ahmad Bashri (2011) The health of our city universal design : a case of accessibility of public building in Malaysia. In: International Journal Of Arts & Sciences (Ijas) Conference.

Zamzuri, Hairi (2011) Verification of intelligent fuzzy mechanism control strategy using 9 dof complex tilting railway vehicle model. In: 2011 IEEE International Conference On Intelligent Computing And Intelligent Systems (ICIS 2011).

Thesis

Abd. Hamid, Zahidy (2011) The effects of ISO 9000 quality management systems on project management performance in construction industry. PhD thesis, Sekolah Razak UTM Dalam Kejuruteraan dan Teknologi Termaju.

Md. Zain, Md. Zaki (2011) Identification of Royal Malaysian Air Force technology needs as acredible air power. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.