Browse by Type

Burhanudin, Noor Ainy (2011) Adaptation of gateway™ as JKR process review to ensure project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Hussien Ahmaidi, Hani (2011) Personnel job satisfaction and job performance in Sudanese construction firms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ghengesh, Mohamed Ghengesh (2011) Treatment of traces of oil from electroplating industry wastewater by using membrane bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Meldi, Meldi (2011) Nonlinear seismic performance of integral prestressed concrete boxgirder bridge in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Aziz@Ahmad, Azian (2011) Oral instructional language features of science teacher trainees in teaching science in English in schools. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdulridha, Ammar Ali (2011) Fatigue life of hot mix asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Majlan, Kamyar Ahmadi (2011) Synthesis and characterization of ni-cnt composite coating produced by direct electro plating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Badrun, Mohd. Zahrullail (2011) Prediction of ultimate bored pile capacity using global strain extensometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Nurhidayah (2011) The design and construction of post tensioned flat slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammed Salleh, Noor Masnira (2011) Work improvement at an animal feed mill. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salih, Asmaa Gheyath (2010) Effective shear strength parameters of remoulded residual soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zamani, Mazdak (2010) Genetic based substitution techniques for audio steganography. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ibrahim, Alia (2010) Elastohydrodynamic lubrication for bio-based lubricants in rectangular conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chinigarzadeh, Asma (2010) Isolation and cloning of human NQO1 promoter in pGL3 basic vector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Drammeh, Isatou (2010) Biodiversity of thermophiles in Sungai Klah and Ulu Slim Hot Springs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Kong, Wan Looi (2010) Mutation of cyclodextrin glycosyltransferase by domain swapping and site-directed mutagenesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Farsadi, Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes wav. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad, Nariman (2010) Visual database design for driving simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Norhayati (2010) The study on the micro-pits location on the extrusion die surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Ismariani (2010) An enhanced hough transform method in image segmentation for circle detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Safari, Habiballah (2010) Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Basravi, Amirhossein (2010) Finite element analysis of reinforced concrete column with longitudinal hole. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amaranazan, Anilarasu (2010) Hill land development challenges in Penang Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hermanto, Budi (2010) Schedule risk analysis in offshore development project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansour, Farnoud Rahimi (2010) Flexural behavior of precast concrete slab with steel fibre concrete topping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shukri, Faten Adilah (2010) Malaysia construction experience in deployment of crane services for construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Krishnan, Ganesan (2010) Performance of Nd:YVO4 laser at various doping levels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Dabo Baba, Hammad (2010) Building information modeling in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rahman, Hizamul-Din (2010) Establishing a project management office for a more effective and efficient implementation of projects in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shah Ali Charlie, Liza (2010) Assessment of water quality characteristics during base and storm flow events on Sungai Langat Basin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Low, Tian Hock (2010) Vibration based damage detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kolyaei, Maryam (2010) Optimization of biodiesel production of fatty acid esterification using ion exchange resins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Abd. Rahim, Mashkurah (2010) Preparation and characterization of nanostructured barium oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nourbakhsh, Mehdi (2010) Mobile application prototype for on-site information management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Y.Mohmed, Mohmed (2010) Study on social network tools for corporate business. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Kouhnavard, Mojgan (2010) Micro ring resonator for communication security. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasan, Muhamad Khair (2010) Improving time estimation in JKR project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naharu, Nasrah (2010) Front end customer relationship management (CRM) for UTM alumni. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Zaharudin, Noor Sabrina (2010) A comparison of modal flexibility method and modal curvature method in structural damage detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Nor Ikhwan (2010) Adhesion on different rate of binder and aggregate for chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Razak, Norliza (2010) Improvement of e-learning in term of communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ab. Kaderld, Mohd. Azamnie (2010) Conduction mechanisms in diamond-like carbon thin films prepared by PECVD method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bujang, Mohd. Abdullah (2010) Peranan perunding tanah dalam proses pengambilan tanah. Kes kajian : projek landasan berkembar keretapi elektrik Seremban-Gemas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Tajudin, Mohd. Nadzreen Haizam (2010) Space charge limited current conduction in nanocrystalline silicon nanofilms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Koo, Nyuk Kin (2010) Synthesizing decision making based on community emergency fire action : a high intensive area, Pasir Gudang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abd. Rahim, Mashkurah (2010) Preparation and characterization of nanostructured barium oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wong, Yee Leng (2010) The impact of discretization methods on Chinese handwriting identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Adel Dawood, Ali (2010) Cloning of influenza B NS1 gene in Escherichia Coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Abraham, Arimokwu (2010) Numerical simulation of standing wave in an acoustic chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior HFCVD diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boo, Nan Shing (2010) Interfacial reactions between lead- free solders and electroless nickel/ immersion gold (ENIG) surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ch’Ng Emily, Huey Ling (2010) Musculoskeletal disorders among offshore-structure fabrication yard workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yap Gabriel, Wei Phing (2010) Recognition of isolated prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ong, Lih Lih (2010) Cloning and overexpression of influenza a H1N1 NS1 protein in escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Marzoughi, Foad (2010) Making a decision model in construction companies regarding to weather risk by statistical method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Hamidi, Behzad (2010) A green cost allocation model for office and commercial buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasir, Kamarul Azlan (2010) Development soil parameters for hydrologic modelling in upper Sungai Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paringga, Lanang Ardi (2010) Construction safety in Jakarta, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asif, Mohd. Azmi (2010) Cadangan Perjanjian Aras Perkhidmatan (SLA) untuk aktiviti di antara sektor bisnes dan sektor pakar di JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Jamir, Mohd. Ridzuan (2010) Experimental investigation of minimum quantity lubricant (MQL) in cold forward extrusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mutia Suhaibah (2010) The sol-gel synthesis and characterization of strontium titanate doped with Pr and Al ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lau, Kim Soon (2010) Single-site modeling of rainfall based on the Bartlett-Lewis rectangular pulse model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Samah, Samirah (2010) Exploratory study of service quality for online shopping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ab. Rahman, Nur Alifah (2010) UV-Vis characterization of diamond-like carbon thin films deposited using (DC-PECVD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lai, Tze Wee (2010) Verification of boundary integral equation for conformal mapping of doubly connected regions onto a disk with a slit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Almaary, Wafa Obied (2010) Handwritten Arabic writer identfication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Jhonny, Jhonny (2010) Post-seismic earthquake deformation monitoring in Peninsular Malaysia using global positioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Nurashikin (2010) Particle swarm optimization for solving vehicle routing problem with time windows. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Quek, Jin Kin (2010) Planning a structured on-the-job training program in the Malaysian workplace: a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamad, Mazuina (2010) Design, fabrication and characterization of gallium nitridebased circular schottky diode for hydrogen sensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shoushtari, Abdollah Vaez (2010) Seismic behavior of tall building structures by friction damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz, Farha (2010) CO2 and surface temperature reduction on building surface using green walls. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Giwangkara, Grawira Ganjur (2010) A study on marine sand as a jointing material for concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jorat, Mohammad Ehsan (2010) Strength and compressibility charactrisitcs of kaolin mixed with bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Noor Asiah (2010) River mouth stability of Sungai Papar, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Noraziah (2010) Performance of constructed wetlands using Vetiveria zizaniodes for sewage treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zadeh, Mostafa Ghadak (2010) Risk management implementation in the iranian construction industry from contractors' perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hajihasani, Nadia (2010) Detection of spalling using vibration data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aghlara, Reza (2010) Application of 2-dimensional digital image correlation for mapping bond strain and stress distribution in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gopalan, Thanath (2010) Performance prediction of prefabricated vertical drains beneath embankment on soft ground by finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asmawi, Aziah (2010) Hybrid detection for databases using SQL injection and insider misuse detection techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdul Aziz, Azliza (2010) Development of a ducted horizontal axis marine current turbine rotor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Nawi, Ikhwan Naim (2010) Pulsed Nd :YAG laser micro welding of stainless steel material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ghasemnatajrokni, Komeil (2010) Digital elevation model generation and accuracy assessment using aster satellite image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Muyideen Oladimeji, Abdulkareem (2010) Relationship between outrigger position and external columns size in minimizing building response to wind. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zukri, Azhani (2010) Comparison between predicted and observed compressibility characteristics of treated soil using precompression and vertical drain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadnia, Behzad (2010) Apartments ownership and maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Farsangi, Ehsan Noroozinejad (2010) Seismic vulnerability analysis of various types of dams with finite element methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Golzarpoor, Hamed (2010) Application of BIM in sustainability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Mukhtar (2010) Development of quantitative quality cost matrix for Malaysian construction quality management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Zalina (2010) Design verification on bored pile within Kenny Hill formation via static load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ganjbakhsh, Hamed (2010) Building performance diagnoses using post occupancy evaluation for low energy office building practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kalkabay, Bekzat (2010) Improving corporate governance through ICT risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Kalkabay, Maksat (2010) Islamic venture capital: mitigation of agency problem in ICT joint ventures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Cheng, Yew Leong (2010) Integrating green initiatives into existing commerical buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadir, Sahba (2010) Investigation of fluid flow through cellular structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noh, Shahril (2010) Quality characteristics of thin-walled plastic injection parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rozali, Afzan (2010) Product design improvement through design for manufacture and assembly (DFMA) and theory of inventive problem solving (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fitra Lestari, Fitra Lestari (2010) Developing system information technology on planning demand and supply. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Malik, Mohd. Maarif (2010) Modeling of dynamic response of desktop computer’s motherboard due to drop impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Mohd. Ridhwan (2010) Design of new interlocking bricks making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Mohd. Rozaimi (2010) Effect of cutting parameters on the surface integrity of ground AISI 1148 steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razali, Nadlene (2010) Determination of the flow curve of necking tensile specimen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Nazri Huzaimi (2010) Elastohydrodynamics lubrication for bio-based lubricants in elliptical conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adnan, Nazrul Hamizi (2010) Design and development of a portable onion peeler machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Norfaizem (2010) Effect of tool length on plain turning performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idrus, Noriqman Hakimi (2010) Design and development of the oil expeller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff, Salahuddin (2010) Performance evaluation of carbide tool in end milling of medium density fiberboard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Abu Seman, Sharifah Zainaf (2010) Integration of design for manufacturing and assembly (DfMA) and theory of inventive problem solving (TRIZ) for design improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulong@Zakaria, Zaeime (2010) Development of computer-aided materials and manufacturing process selection software using Boothroyd-Dewhurst methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Ghafar, Alimi (2010) Optimizing crushing processing parameters of oil palm shell charcoal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Imran (2010) Design of a curry puff making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kang, Boon Siang (2010) Quality improvement through implementation of poka yoke and six sigma methodology in thermal interface material coating industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Jusoh, Mazlan (2010) Surface integrity evaluation on titanium alloy after EDM machining using different graphite electrodes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mesuan, Mohd. Ariffin (2010) Simulation of metal stamping for panel front door inner part for new automotive model development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Isa @ Hamid, Mohd. Halimudin (2010) Performance evaluation of electrical discharge machine on titanium alloy using copper impregnated graphite electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunus, Mohd. Yusri (2010) Software development of concurrent design for manufacturing process selection of plastic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Mu’Tasim, Muhammad Ammar (2010) Simulations of solid particle in a lid-driven cavity flow using Lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Halim, Shahrizal (2010) Performance evaluation of nitrogen gas-assisted laser cutting on 316L austenitic stainless steel plate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Aregia, Tarek Abdelhadi (2010) Computerized welding process selection and parameter determination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yeong, Weng Harn (2010) Layout optimization and manning ratio improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Ahmad Dzia’Uddin (2010) Effect of process parameters on surface roughness produced by turning boring operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suid, Asmar (2010) Investigation of the microscopic deformation behavior and surface quality of austenitic stainless steel plate during holes piercing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anuar, Azman (2010) Investigation of laser cutting parameters on surface quality of stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azman, Azri (2010) Performance evaluation of different process conditions when hard turning ASSAB 760. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chia, Chon Yue (2010) Performance evaluation of diamond cutting tools when ultra precision grinding spherical part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Izyan Hazwani (2010) Development of novel particle detector with multi pixel photon counter readout. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ali, Mohd. Nizam (2010) Performance evaluation of wire electrode discharge machining (WEDM) On Inconel 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahri, Norsyarizan (2010) Development of a material handling system for catheter manufacturing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Hamid, Huzaimi (2010) Design, fabrication and testing of a semi-automatic welding fixture for circumferential joining cylinders using MIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsuri, Siti Rahmah (2010) The effect of soil resistivity on corrosion behaviour of coated and uncoated low carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Nasir, Sasha (2010) The evaluation of gold nanoparticles embedded on polyvinyl alcohol matrix as oxidation catalyst and biosensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Chiew Woon (2010) Optimisation of the hydrolysis of oil palm empty fruit bunch to glucose using RSM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ahdash, Abdelsalam I. S. (2010) Design of impressed current cathodic protection for steel immersed in freshwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Lazim, Azlinda (2010) Critical success factors for contracting organization during recession. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sipun, Halizah (2010) Penempatan semula setinggan Negeri Perak kawasan kajian : Rancangan Perkampungan Tersusun Seri Murni, Seri Keramat Dan Tok Chendang, Mukim Ulu Kinta, Daerah Kinta. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Noordin, Joomizan (2010) Reservoir storage simulation and forecasting models for muda irrigation scheme, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Mohamad Sabri (2010) Hubungan pusat khidmat setempat (OSC) dengan jabatan-jabatan di dalam pihak berkuasa tempatan (kajian kes : Negeri Perak). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Yusuf, Mohd. Yassin (2010) Pentadbiran harta pusaka GSA dalam sistem pentadbiran tanah negara dan bagi tanah felda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Yahya, Nina Izurin (2010) Pelaksanaan kebenaran merancang di kawasan luar bandar kajian kes : Pihak Berkuasa Tempatan Utara Negeri Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohamed, Nurul Wahida (2010) Road maintenance management system : a case study at public work department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Siti Norazela (2010) Simulation of river embankment stability : a case study on failure and remedial method at Muar River, Panchor, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar, Siti Rahmah (2010) Plants volume as a factor affecting outdoor ambient air and thermal condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Swee Kok (2010) Cost effectiveness comparison of pre-fabrication with conventional construction method for RMAF ground defense bunker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bahari, Adli (2010) Numerical solution of elastohydrodynamic lubrication with non-newtonian fluid flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahamed, Ahmad Fauzi (2010) Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kizi Imadildayeva, Aigul Zhaidarbek (2010) Developing e-learning for Kazakh National University. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Yaseen, Ali Taha (2010) Tumor detection based on enhanced hill climbing method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abarghouei, Amir Atapour (2010) A novel solution to traveling salesman problem using fuzzy sets, gravitational search algorithm, and genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Chew, Kim Mey (2010) Comparison of ontology learning techniques for Qur’anic text. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Saeed Bamasoud, Doaa Mohammed (2010) E-commerce web design guidelines for teen shoppers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Qasem Saeed, Faisal Abdulkarem (2010) Student-university communication media using web 2.0. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Sharbini, Hamizan (2010) Crowd modelling behaviour based on modified microscopic models in panic situation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mat Sahat, Idris (2010) A numerical analysis of two dimensional lid driven cavity flow using cubic interpolated pseudo-particle method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kuang, Yunzhu (2010) Improved credit evaluation system of taobao company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Talab, Mahmood Aghajani Siroos (2010) Code generation for embedded real time system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ismail, Maizatul Akmam (2010) Component model for agent pattern-oriented design (AgentPOD) framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohammed Hamouda, Mohammed Elgasim (2010) IT supported project based learning framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Azmi, Mohd. Irwan (2010) Numerical study of convective heat transfer and fluid flow through porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafartayari, Saman (2010) Awareness of sustainable manufacturing practices in Malaysian manufacturers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Ali @ Syed Ali, Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yen, Wee Khun (2010) A study on soft computing approach in weather forecasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Muniandy, Gopinath (2010) Forensic engineering testing techniques for structural assesment : a case study on pre-stressed reinforced concrete bridge at Klang Valley. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esmaeeli, Hamed (2010) Road accident analysis factors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lew, Kin Yoon (2010) Kaedah pembangunan semula kawasan Brownfield kajian kes : Connaught Avenue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Nyomek, Lydia (2010) The integration of quality management system in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nuid, Maria (2010) Structural behaviour of a single tendon end block. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soleimani, Mohammad (2010) Numerical and experimental investigation of synthetic biogas pulse combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Adib, Mohd. Azrul Hisham (2010) Analysis of blood flow into the main artery via mitral valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Goodarzi, Mohsen Salarpour (2010) Flood mapping of Sungai Skudai using infoworks RS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Nazari, Munira (2010) Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Azizan, Nik Zainab (2010) Building performance with different bedrock response spectrum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Norasikin (2010) Occupational safety and health improvement at casting plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Norazalina Yusnita (2010) Peranan pesuruhjaya bangunan dan pihak berkuasa tempatan kajian kes : Negeri Selangor Darul Ehsan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Noor, Norazman (2010) Keselamatan dalam perumahan komuniti berpagar. Kajian kes – Apartment Prima dan Taman Kristal 2, Sepang Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Baharuddin Pallan, Nor Faizah (2010) Heavy metal in pen shells (Bivalvia-Pinnidae) at Merambong Island and Merambong Seagrass Shoal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Mohd. Rizal (2010) Building management system : a case study at Albukhary foundation head office. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ku Sulaiman, Ku Safirah (2010) Seismic behaviour of tunnels with different soil types and depths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustapa, Saidatul Muzlipah (2010) Pembangunan pangkalan data sistem maklumat geografi dalam program tanam semula tanah felda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Najafabadi, Sayed Hossein Mousavian (2010) Experimental study of reinforced concrete columns with embedded pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Siti Khalijah (2010) Sand behavior characterization for various grain size distributions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaffar, Siti Rahayu (2010) Strength behaviour of column studs in prefabricated wall panels using cold-formed steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taib, Tahrina (2010) Efficiency in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soon, Tan Kian (2010) Dispute resolution in relation to delay of construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karunanidee, Vigneshwaran (2010) Load resistance behaviour and installation assessment of driven spun pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Jusoh, Wan Hidayatul Hak (2010) Column design with semi-rigid end frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arvin, Yashar (2010) Improvement of structural stability for multi – storey building by using composite column and cable connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Zulkhairi (2010) Techniques for valuation of variation works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Neshati, Akram (2010) Extraction and characterization of purple pigment from chromobacterium violaceum grown in agricultural wastes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Bakir, Azman (2010) Characteristics of motion errors of 3–Axis CNC vertical milling machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dedi Irawan, Dedi Irawan (2010) Power transfer on multiple fiber couplers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamrus, Farah Nadzirah (2010) Exact solutions for unsteady unidirectional flows of second grade fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Bakar, Faridah (2010) Synthesis of Al-MCM-41/ZSM-5 composite for oxidation of norbornene to norbornene oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Goh, Bor Chyuan (2010) The application of dressing method on nonlinear evolution equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamzah, Hafida (2010) Simulation of neutron flux in silicon, cadmium and plumbum using Monte Carlo method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Othman, Hanimah (2010) Finite element method for two-dimensional elasticity problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Amiruddin, Mohd. Noor Asyraf (2010) Study on the skidding performance of stone mastic asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rossdy, Munirah (2010) A case study on the application of 0-1 goal programming : nurse scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Qasem, Murad Abdo Rassam (2010) Anomaly intrusion detection system using immune network with reduced network traffic features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Nor, Norehan (2010) Restoration of neutron radiography images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Nor Ezzaty (2010) Structural and luminescence properties of magnesium aluminate borate glass doped with Eu and Dy ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sinaie, Saman (2010) Solving shortest path problem using gravitational search algorithm and neural networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Senusi, Shahrullizam (2010) Solar absorption thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansur, Syahira (2010) Numerical solution for G-jitter induced free convection with constant heat flux. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Appu, Venothini (2010) Synthesis of chalcones and derivatives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yu, Zheng (2010) Recognition of interacting prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samian, Normalia (2010) Trust features-based friendship mechanism for mobile ad hoc networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Kardani, Seyed Mohsen (2010) An investigation into the importance of knowledge management in collaborative commerce. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdullah, Afnizanfaizal (2010) Graph partitioning algorithms for detecting functional module from yeast protein interaction network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ghanizadeh, Afshin (2010) A hybrid approach to edge detection using fuzzy sets and cellular learning automata. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Bakar, Khairul Bariyah (2010) Garbage enzyme as an alternative method in treatment of sullage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chia, Chee Pen (2010) The Hirota's direct method and multi-soliton solutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pesaran Behbahani, Hamid (2010) Flexural behavior of steel fiber reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Hassan Osman (2010) Research service learning : an investigation in to its viability as a strategy to achieve FSKSM’s goals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohammad Joshani, Mohammad Joshani (2010) Nonlinear finite element analysis of steel-concrete composite slabs using explicit dynamics procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yahya, Muhammad Yasir (2010) Pengenaan cukai petak di atas pembangunan hakmilik strata. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Safana, Ahmed Ibrahim (2010) Implementation of test management on OBA system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Amin Maree, Bashar (Moh'd Walid) (2010) Open source forensic tools for linux hard disk investigation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Jantan, Mohd. Faidzal (2010) Practical approach in evaluating the resistance of stream ciphers against algebraic attacks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Omar, Nurul Aswa (2010) Requirements analysis for customer feedback management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Isnin@Hamdan, Rusnita (2010) A study of trusted computing implementation in public sector information, communication and technology (ICT) domain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Chaeikar, Saman Shojae (2010) Interpretative key management framework (IKM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Md. Sharif, Syahrizal Azmir (2010) Analysis and effectiveness of signature based in detecting metamorphic virus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ahmad Baidowi, Zaid Mujaiyid Putra (2010) Detecting plaintext recovery attack in secure shell (SSH). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

A. Ahmed Al-Dulaimi, Ahmed (2010) Evaluation of polyaniline composites and nanostructures as anti-corrosive pigments for carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Jahanabadi, Hossein (2010) Intelligent active force control of a human-like arm actuated by pneumatic artificial muscles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ahir, Zon Fazlila (2010) Design, fabrication and characterization of capacitively coupled gallium arsenide-based interdigitalgated plasma devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Majid, Mohamad Zaki (2010) Beam-to-column connection using hollow steel section for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Malek, Anie Raflikha (2010) Evaluation on the effects of sea level during El Nino and La Nina events in Malaysian water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loh, Wee Loon (2010) Performance of pullout resistance of anchored earth system by field pullout test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Kah Leong (2010) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel lipped channel sections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Alhassan, Aliyu (2010) A framework for design information management system for architects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abd. Malek, Anie Raflikha (2010) Evaluation on the effects of sea level during El Nino and La Nina events in Malaysian water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Jaini, Azhar (2010) Stroke-to-stroke matching in on-line signature verification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Afrakhteh, Masoud (2010) Steganography based on utilizing more surrounding pixels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Syed Taha, Sharifah Rabeah (2010) Knowledge sharing framework for community of practice : single mothers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ramli, Mohd. Adib (2010) The shape grammar of Rudinara Residence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Niaraki, Seyed Ali Mousavi (2010) Six sigma approach to real time cast in-situ slab concreting process improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jazi, Mehdi Erfani (2010) Catalytic esterification of benzyl alcohol with acetic acid by zirconia-loaded on mesoporous material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Davari, Reza (2010) Profiling mobile business customers for mass customization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Aminu Mu’Azu, Abubakar (2010) Critical information assets disaster management audit model for UTM student information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ibrahim, Al-Fattah (2010) Customer profile management system using CRM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Loh, Mun Yee (2010) Speaker identification using distributed vector quantization and Gaussian mixture models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

A. Karim, Mohd. Nazri (2010) Log periodic fractal KOCH antenna for wireless applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azraie, Salahuddin (2010) Numerical simulation of heat transfer in blood vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muda, Mohd. Zuki (2010) Awareness and acceptance analysis of information security policy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohammad, Noor Nadhiya (2010) Product structure ontology to support semantic search in manufacturing requirements management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

A. Majid, Huda (2010) Left-handed metamaterial incorporated with microstrip antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khamis @ Subari, Nazimah (2010) The effect of composition, annealing temperature and thickness on magnetoresistance of ferromagnetic multilayer structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Choon Ching (2010) Feature selection method of web page language identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Dianat, Oldooz (2010) Length estimators for two dimensional and three dimensional images using relative direction chain code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ramli, Arnidza (2010) Free space optical front-end receiver’s bandwidth enhancement employing micro-electro mechanical systems variable feedback capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aulia, Aulia (2010) Lightning locating system using twisted pair overhead lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chin, Tian Kae (2010) Oxidative coupling of ortho-aminophenol over mesoporous silica containing copper(ii) diethylamino-substituted salen complex. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mokayed, Hamam M. Ibrahim (2010) Signature verification system based on multiple classifiers and multi fusion decision approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liew, Hwi Fen (2010) The absolute method of neutron activation analysis using triga neutron reactor, nuclear agency, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

W. Embong, Wan Mohd. Ariff Ehsan (2010) Enhanced lightweight medium access control protocol for wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Majid, Wan Rashidah (2010) Q-switched Nd:YAG laser induced photodisruption in an eye model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Din, Dahlia (2010) A source code query to support structured program understanding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Hosseini, Majid (2010) Received signal strength indication based distance measurement using lambert function for underwater wireless sensor network localization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohamad, Rita Noremi (2010) A change impact analysis approach using visualization method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ismail, Nurul Syazwani (2010) Kamus web multimedia interaktif berasaskan pendekatan andragogi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Balakrishnan, Harintharavimal (2010) Mechanical, thermal and morphological properties of montmorillonite filled linear low density polyethylene-toughened polylactic acid nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ismail, Norshahida (2010) Experimental set up for characterization of acousto-optic modulator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Susiwi, Susiwi (2010) Adsorption of metals from recovered base oil using zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kutty , Praveena Charter (2010) Agrobacterium tumefaciens mediated genetic transformation of nicotiana tabacum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Ariffin , Rohizat (2010) Allowable interface slip of composite slab to achive full interaction behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Woo Wei, Lim (2010) Amalan ejen harta tanah tidak berdaftar dalam industri perejenan harta tanah di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Majidi , Mojib (2010) Analyses of key management techniques for secure patient monitoring in wireless sensor network environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan Ali , Abdinasir (2010) Analysis and implementation of security algorithms for wireless communications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shooshtari , Mohammad Jorjor Zadeh (2010) Analysis of effectiveness of honeypots in tracking botnets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Yusof , Nur Iryani (2010) Analysis of glass fracture patterns on glass panes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Said Ali @ Syed Ali , Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Salleh , Zuliazura (2010) Analysis on the flow and pressure distribution for actual stenosis in trachea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dorasol, Noorfariha (2010) Analysis prestasi syarikat korporat harta tanah kes kajian : Johor Corporation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Esfroshani , Mahdi Ramezanzadeh (2010) Analytical method for noise reduction of tire using wave propagation approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Yusoff , Nor Asma Husna (2010) Antimicrobial activity and cytotoxic effect from rootsand leaves crude extract of Chromolaena odorata (L). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Mokhtar, Kamran (2010) Application of clad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior hfcvd diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Goh, Bor Chyuan (2010) The application of dressing method on nonlinear evolution equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pusppanathan, Jaysuman @ Muhammad Jaysuman (2010) Application of ultrasonic tomography in non-invasive imaging of liquid-gas flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amirshakarami, Azam (2010) Apply color invariance in multichannel estimation of optic flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wan Mahmud, Wan Musa (2010) An approach of rib resign for injection moulded characteristics of a hand phone casing part by using simulation of moldflow and design of experiments (doe). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kassim, Rahimah (2010) The assessment of E-CRM towards organization effectiveness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zahar, Zulfadli (2010) Assessment of low cost road pavements (with stone subbase) permeability and rutting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paydar, Ali (2010) Assessment of multi-timed urban road network under cluster condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khanjanzadeh, Arman (2010) Assessment of pedestrian and motorized traffic-mix in town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rizal Yahya, Mohd. Syah (2010) Assessment of the potential benefits of four-dimensional planning and scheduling software in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsuddin Sah, Samera (2010) Assessment of water quality conditions during base and strom flow events in Sungai Perak Basin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nezhad Khalil Abad, Seyed Vahid Alavi (2010) Assessment on blasting-induced rock slope instability at Bandar Seri Alam, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wulandhari, Lili Ayu (2010) Automating the mapping algorithm for vertex chain code representation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jafartayari, Saman (2010) Awareness of sustainable manufacturing practices in Malaysia manufacturer s. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tajabadi, Morteza Ghaempanah (2010) The awareness towards green office facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Achara , Bitrus Emmanuel (2010) Behavior of lightweight concrete containing palm oil shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al. Dymany , Haidar R. Hashim (2010) Behaviour of wide reinforced concrete beam in shear. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alizadeh , Mina (2010) Biomechanical evaluation of spine posterior rigid fixations : a finite element study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zeidanloo , Hossein Rouhani (2010) Botnet detection by monitoring common network behaviors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Yusop , Norwahida Azwani (2010) Calibration of soil moisture accounting (SMA) parameters in Sungai Johor river basin using hydrologic model HEC-HMS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haw , Kok Giap (2010) Catalytic oxidative desulfurization of diesel utilizing functionalized-activated carbon and supported transition metals doped molybdena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haminudin , Nor Faizah (2010) Center pressure for bio-based lubricant in elastohydrodynamic lubrication of rectangular conjuction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baldwin , Thomas Pamela (2010) Characterization and degradation of styrene using bacillus cereus isolated from petrochemical wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Wahab , Nuruhuda (2010) Characterization of calcium oxide prepared by hydration-dehydration method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Junit , Nor Faridah Hanim (2010) Characterization of electro-optic switching for fusion directional coupler by numerical method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alias , Nur Shahira (2010) Characterization of magnesium calcium tellurite phosphor doped with europium and dysprosium ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Tarmizi , Zatil Izzah (2010) Chemical structure and compatibility of chitosan-polyamide66 blend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashir , Adilah (2010) Claim issues in structural failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee , Soo Yee (2010) Cloning and biochemical characterization of recombinant xylanase from Aspergillus fumigatus RT-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Janalizadeh, Narges (2010) Cloning of flaving reductase gene of Citrobacter freundi A1 into Escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

A. Dawood, Reem (2010) Cloning of NS1 gene of influenza H1N1 into Escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Aziz , Farha (2010) Co2 and surface tempreature reduction on building surface using green walls. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siroos Talab, Mahmood Aghajani (2010) Code generation for embedded real time system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

B. Majed , Mohammed (2010) Coexistence between the mobile service and terrestrial-digital video broadcasting in the 790-862 MHz frequency band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Teh , Irene Hui Lynn (2010) Combustion and emission investigations of a diesel engine operating on palm oil derived fuels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chek, Desmond Chang Yih (2010) Compact modeling of carbon nanotube field effect transistor and its circuit performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Pakshir , Amir Hossein (2010) Comparative assessment of road network trip distribution using growth factor and gravity modeling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelgalil, Ahmed S. A. (2010) Comparative assessment of signalized and unsignalized roadway intersections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azhari , Farhana (2010) Comparative study between radial basis function and polynomial of support vector regression in predicting flood. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Oh , Yit Leng (2010) A comparative study of maximum likelihood and bayesian estimation approaches in estimating of gamma frailty mixture survival model parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Amri, Idral (2010) Comparison between axial and backflow model of ion exchange system for heavy metal removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Gelungan, Cassindra (2010) Comparison between maximum likelihood, artificial neural network and decision trees technique for land cover mapping using remotely sensed data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohammed Ahmed , Omar Babiker Elhaj (2010) Comparison of continuous dynamics probing with the standard penetration test for highly weathered limestone of eastern Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nordin, Azian (2010) Comparison of multi-temporal polarimetric airsar data for vegetation mapping : a case study in Cameron Highlands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zolkifli, Ili Amira (2010) Computerized maintenance management system (CMMS) implementation problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Amirrudin, Siti Nurulhuda (2010) Construction duration for various healthcare facility projects for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail , Nazirah (2010) Contractor's time performance in affordable housing program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thien, Yung Fatt (2010) Control of piezoelectric actuator on human-like hand model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sofi , Nursyazwani (2010) Critical competencies for effective services in private finance initiativ e (PFI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rahman , Marwa (2010) Critical state of fly ash-bottom ash mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Putra, Emansa Hasri (2010) Crosslayer design of wireless local area network for telemedicine application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Seyedi, Seyedalireza (2010) Cutting angle method for optimal control problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Beigzadeh , Shima (2010) Database management system for Taman Keramat Permai (TKP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Etminan , Payam (2010) Design and development of diamond grinding wheel for ultra precision applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fallahiarezoodar , Ali (2010) Design and kinematic analysis of high flex knee implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fallah, Iman Abbaszadeh (2010) Design consideration for motorist at urban four-arm signalize intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ahir , Zon Fazlila (2010) Design, fabrication and characterization of capacitively coupled gallium arsenide-based interdigital-gated plasma devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Parimon , Norfarariyanti (2010) Design, fabrication and characterization of gallium arsenide-based schottky diode for on-chip power detector and rectenna application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad , Mazuina (2010) Design fabrication and characterization of gallium nitride-based circular schottky diode for hydrogen sensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

A. Hamid , Huzaimi (2010) Design, fabrication and testing of a semi-automatic welding fixture for circumferential joining cylinders using MIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Paramananth , Victor Ananth (2010) Detection of organic gunshot residues for the estimation of firing distance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Teah , Yu Nuo (2010) Detection of vegetable oil residues from fire debris samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Almasinia , Mohammad (2010) Determination of flow of pipeline in water distribution network using lidar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Marzuki , Muhammad Akmal (2010) Determination of shoreline rate of changes using ikonos data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Razali , Nadlene (2010) Determination of the flow curve of necking tensile specimen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pourzargar, Fatemeh (2010) Developing e-learning system for primary school level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali Arab , Enas Hassan (2010) Developing guidelines and standards for teachers to use the e-learning system in Dar Alhuda International kindergarten. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdullah , Mohamad Firdaus (2010) Development of a computational framework for protein homology detection by incorporating realignment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Dzahir , Mohd. Azuwan (2010) Development of assistive robotic arm for stroke rehabilitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behnam , Sarah (2010) Development of biomechanical risk assessment technique in patient handling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heidari , Milad (2010) Development of elbow prosthesis for total elbow arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cherraghizanjani , Alireza (2010) Development of measurement and behavior classification in tremor patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim , Zalikha (2010) Development of QSAR models for predicting anti-inflammatory activity of chemical compounds from natural products. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lv, Ya (2010) Development of simulation software for simulating the interactive control of manipulators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammadi, Salimeh (2010) The development of transfection reagent for mammalian cell culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Hafiz Abdullah , Muhammad Daniel (2010) Devising usability and security features for graphical password scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hosseinzadeh Benvidi, Samira (2010) Dynamic pattern protocol exerciser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Taghavisangdehi, Seyedhamed (2010) Effect of adding carbon nano tube into dielectric when edming titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eslami Harandi, Shervin (2010) The effect of calcium content and forging parameters on the properties of biodegradable MG-CA alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S. Alyami , Saad Rabia (2010) The effect of coconut dust addtion on the properties of green sand and investment casting moulds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahamed , Ahmad Fauzi (2010) Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminium alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saaran , Idris (2010) Effect of different pretreatment parameters on silicon nitride substrate surface roughness prior to diamond deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaari , Mohd. Rosmani (2010) Effect of edge preparation when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramiah , Sathiapriya (2010) Effect of lattice topologies and distance measurements in kohonen for better classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Rohani , Noor Aziah (2010) Effect of packaging on the alkaloidal content of ketum leaves (mitragyna speciosa k.). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed , Ahmad Dzia'uddin (2010) Effect of process parameters on surface roughness produced by turning boring operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Juhari, Mohd. Al Jeffrie (2010) Effect of seismic loading in slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussain , Fadi Faris (2010) Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Rofii , Qonitatillah (2010) Effect of substrate and template on the development of nano tungsten and indium oxide thin films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yahya, Nur Hayati (2010) The effect of visual viewing geometry on computer monitor user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Rahim , Hairol (2010) Effective project delivery-strategies for successful implementation of projects under 10th Malaysia plan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdolahi , Hamed (2010) Effects of annealing on structure and magnetic properties of semiconductors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Joon Shyan (2010) Effects of interaction between strontium,antimony and titanium-boron on microstructure and properties of alumium alloy ai-11%(LM6). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Lip Voon (2010) Effects of land use on river and estuarine water quality at Johor straits and its subsequent effects on green mussels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alir , Kartini (2010) The effects of musculoskeletal disorder on drivability among compact car drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Othman , Wan Mohd. Said (2010) The effects of windows service packs on port scanning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ayop , Osman (2010) Electromagnetic band gap structure incorporated with ultra-wideband antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khan , Amin-ud-din H. R. (2010) An empirical investigation of structural conditions and maintenance practices of Universiti Teknologi Malaysia buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Susanti , Susanti (2010) Enantioseparation of selected triazole fungicides using cyclodextrin-modified micellar electrokinetic chromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kasraei , Mohammadreza (2010) Energy life cycle cost analyzing (ELCCA) in residential building to energy efficiency approach in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamood Alshameri, Badee Abdulqawi (2010) Engineering properties of older alluvium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainudin, Mohd. Eyzuan (2010) Enhancing information security awareness and computer ethics for non-information technology company using integrated model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Yusoff, Sabariah (2010) Ergonomic assessment in an assembly plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman , Mohamad Farijal (2010) Establishing the norm of organisational structure for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M. Yusup , Eliza (2010) Evaluation of an active force control for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sajoudi , Masoud Navazandeh (2010) Evaluation of construction equipment acquisition methods in Malayisan construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shoib , Shamsul Anuar (2010) Evaluation of pile capacity from cone penetration test data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Norshahida (2010) Experimental set up for characterization of acousto-optic modulator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tyurebekov , Yermek (2010) Experimental study of the flow forces in the hydraulic poppet valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias , Nor Eliza (2010) An experinmental study of tsunami run-up on a vegetated coastal slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ho , Nigel Ik Jung (2010) Extraction of buried pipes using ground penetrating radar images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zainol, Mohd. Azry Hazwan (2010) Extraction of polyhdroxyalkanoates (PHA) from anaerobic pond under aerobic feast-famine regime. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail , Khairiyah (2010) Extraction of tree structure and total above-ground biomass (TAGB) using LiDAR data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hairom, Nur Hanis Hayati (2010) Facile electrosynthesis of a nanosized zinc oxide for photocatalytic degradation of methyl orange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan , Huey Yann (2010) Facility management services in shopping centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Koh, Jackline Siang Joon (2010) Factors affecting shopping complex occupancy in Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Musa, Fazilah (2010) Factors associated with communication performance in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngadimin , Noor Wahyu (2010) Factors influencing to the selection of sewage treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainul Amri , Haidar Akma (2010) Failures of roof structures caused by wind uplift forces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Madlan, Munira (2010) Faktor - faktor bukan harga yang dipertimbangkan oleh bakal pembeli rumah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Khair, Nurhayati (2010) Faktor - faktor fizikal dalam penempatan baru (kajian kes : PPR Taman Kempas Permai). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Embong , Samri (2010) Faktor-faktor kritikal yang mempengaruhi tempoh penyiapan projek-projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahri, Mohd. Azuan (2010) Faktor-faktor mikro yang mempengaruhi perbezaan nilai harta tanah kediaman dua tingkat di taman perumahan kes kajian : mukim Pulai, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ruseli, Nurul Akmar (2010) Faktor - faktor penyewaan bumiputera di dalam pusat beli belah kes kajian : Plaza Angsana, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Noor Razali , Razwin (2010) Faktor-faktor perlakuan pengguna yang mempengaruhi pembeli dalam membuat keputusan pembelian harta tanah kediaman kes kajian : daerah Melaka Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Tono , Yuni Rama Yanti (2010) Faktor-faktor yang mempengaruhi keberkesanan tindakan penguatkuasaan oleh Unit Penguatkuasaan di pejabat tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lahom, Mohd. Khairil Azley (2010) Faktor-faktor yang mempengaruhi tahap keselesaan tempat kerja dari aspek pengurusan perkhidmatan bangunan pejabat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Salleh , Mohd. Zaim (2010) Fast flux service networks detection model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Halim, Nur Amalina (2010) Fenomena banjir dan kesannya ke atas nilai sewa harta tanah kediaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wong , Yi Kang (2010) Field and laboratory vibration analysis for structural degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsuddin , Nur Syahirah (2010) Finite difference solution for heat conduction in duct like structure problem using modified polar system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Othman , Hanimah (2010) Finite element method for two - dimensional elasticity problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad , Nurul Huda (2010) Finite element simulation of preforated hollow sphere composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirazi , Arash Nasrollahi (2010) Finite element simulation of three surgical treatments for distal radius in intra-articular fracture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Anis Zafirah (2010) Finite element solution of heat conduction problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ong, Shin Tze (2010) Forensic analysis of inorganic residues of improvised explosives from post-blast soil samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shapie , Haslinda (2010) Forged signature verification by using video spectral comparator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ali Zargoun , Laila Muftah (2010) Formulation of microcarrier for immobilizing chinese hamster ovary cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Alhassan, Aliyu Muhammad (2010) A framework for design information management system for architects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hashemi Dehkordi , Sayed Mahdi (2010) Friction induced vibration and its prevention using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman , Zarith Sofiah (2010) Generalized blasius problem for a viscoelastic fluid with viscous dissipation and suction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tiong, Kenny Ping Chiet (2010) Geochemistry characterization of organic soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamaruddin , Wan Hairul Anuar (2010) Growth of Nd : Yag crystals by using automatic diameter control-crystal by czochralski melt-growth method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Almaary , Wafa Obied (2010) Handwritten arabic writer identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad Zaini, Muhammad Abbas (2010) Heavy metal removal from aqueous solution using activated carbons rich in nitrogen content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Balasbaneh , Ali Tighnavard (2010) Hot climate air flow study and affect of stack ventilation in residential building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan , Noor Hafizah (2010) Hubungan antara kitaran hidup dan struktur perumahan kes kajian : (kakitangan awam Persekutuan Johor Bahru). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mentaza Khan, Puteri Ameera (2010) Hubungan sosial dalam penyumberan luar (kajian kes : Pejabat Harta Bina, UTM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Bakar, Zaleha (2010) Hutan bandar sebagai taman rekreasi di kawasan perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ali Mohammed , Redhwan Qasem (2010) Hybrid optical-wireless access network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Gader , Mohamed Faraj (2010) Identification of dehalogenase producing bacteria isolated from UTM agriculture area and seaside contaminated area of the philippine based on small subunit ribosomal RNA gene sequence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Nik Kasim , Hazlee @ Nik Hazlee (2010) IKM student intake system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chong , Tze Chiann (2010) Image restoration using inverse problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wong , Yee Leng (2010) The impact of discretization methods on chinese handwriting identificatio n. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yau , Wei Heong (2010) Impacts of ultrathin biaxial strained silicon on ultimate drive velocity,. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shahani , Pouria (2010) Implementation of composite bar and beam element into a commercial finite element code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noor Batcha , Mohamed Farid (2010) Implementation of reconfigurable viterbi decoders in hardware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah , Nazirah Mohamad (2010) Implementation plan for marine cadastre in peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Che Ani , Mohd. Norzaimi (2010) Implementations of lean production system in manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dadashi , Nasim (2010) Implementing search engine optimization technique case study : CITAP24.co m website. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ismail , Nur Awatif (2010) Implikasi kegawatan ekonomi terhadap pemilikan harta tanah yang tertakluk kepada gadaian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Muin , Zafirah (2010) Implikasi ketidakpatuhan perjanjian penswastaan projek pembangunan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Subky, Shuzwanni Qayyum (2010) Implikasi pembangunan 'homestay' di kawasan felda kajian kes: Felda Semenchu, Kota Tinggi, Johor Darul Takzim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ibrahim , Siti Nurkhadijah Aishah (2010) Improved web searching approach using hybrid genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Razak, Norliza (2010) Improvement of e-learning in term of communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wan Abdul Ghani , Wan Norhayati (2010) Improvement of project planning process to satisfy clientsÆ satisfactio n in project implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong , Ling Shuang (2010) Improvement techniques for reducing human error. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yerzhan, Abylkhanov (2010) Improving oil recovery in Kazakhstan oilfields by using polyacrylamide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Rabani , Norman (2010) Improving safety control of PWD project through the inclusion of safety requirement in the bill of quantity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim , Faizah (2010) Improving the process of capturing clients' needs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kaya, Yilmaz (2010) In vitro plant regenaration of tobacco (Nicotiana tabaccum TAPM 26). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Ganasan , Kavitah (2010) In vitro regeneration and agrobacterium tumefaciens mediated transformation of citrullus lanatus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Sardadi , Maruto Masserie (2010) Index selection engine for spatial database system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abu Bakar , Akrima (2010) Indirect tension test of hot mix asphalt as related to temperature changes and binder types. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu , Rohana (2010) Influence of fatty acids chain length on insulin receptor sensitivity and glucose transport in 3T3-L1 adipocytes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sulaiman, Anita (2010) Institutionalize partnering in project management for successful project delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kala Raman , Sashi (2010) Integrated treatment of sulfidic spent caustic wastewater using Fenton oxidation and membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aboejaila Abokhdair , Nuha Omran (2010) Integration of chaotic map and confusion technique for color medical image encryption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Fouladinejad , Nima (2010) Intelligent traffic flow simulation system on a small scale environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Patrick , Albert Vivian Thomas (2010) Interface shear stress distrubution of composite slab for partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahangiri , Amirreza (2010) Investigation on A1-Mg2Si MMC TIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kalkabay , Maksat (2010) Islamic venture capital : mitigation of agency problem in ICT joint ventures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chinigarzadeh , Asma (2010) Isolation and cloning of human NQO1 promoter in pGL3 basic vector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Mohamed, Nordiyana (2010) Kaedah penilaian laluan saluran paip gas bagi maksud kadaran di Majlis Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liang, Teng Ching (2010) Kajian ke atas kriteria bidang pengetahuan dan kemahiran insaniah yang perlu diterapkan ke dalam program pentadbiran dan pembangunan tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Teo, Zi Lin (2010) Kajian ke atas pengurus bicara yang tidak aktif dalam kerjaya perejenan harta tanah di Lembah Kelang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Suhaimin, Syuzairin (2010) Kajian kemampuan pemilikan rumah kos rendah kajian kes : Taman Redang, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Rofaii, Nursyamimi (2010) Kajian kemungkinan ke atas pembangunan tanah wakaf kes kajian : Menara Wakaf, Jalan Perak, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Idris, Madihah (2010) Kajian kesesuaian Bandar Indera Mahkota sebagai pusat pentadbiran baru kerajaan Negeri Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Noor Ismaniza (2010) Kajian kualiti air bekalan di Jitra,Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Zahidi, Mohd. Hafiz (2010) Kajian olahan air larut lesap menggunakan tumbuhan sensevieria trifasciat a di dalam sistem tanah bencah buatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Madzura (2010) Kajian perbandingan kualiti efluen domestik antara sistem rawatan hi-kleen dan sistem IMHOFF. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ooi, Hui Li (2010) Kajian terhadap kriteria-kriteria di dalam garis panduan permohonan rumah kos rendah di Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lateh, Saidin (2010) Kawasan pemajuan mengikut akta perancangan bandar dan desa, 1976(bahagian VIII) sebagai kaedah penawaran tanah di kawasan bandar kajian kes : PBT di daerah Johor Bahru dan Kulaijaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Azis, Shazmin Shareena (2010) Keadilan dan keseragaman nilai taksiran harta tanah berbantukan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohsid , Nuruljannah (2010) Keberkesanan pengurusan hartanah Johor Corporation menggunakan "Land Management System Online" (LMSO). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Arif, Nur Adlina (2010) Keberkesanan perlaksanaan kaedah jualan terus rumah awam kos rendah (RAKR) di negeri Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ngadimin, Nurul Faiezah (2010) Kecekapan pelaksanaan one stop centre (OSC) dalam proses permohonan kelulusan pembangunan tanah dari perspektif pemaju kajian kes : pusat setempat (OSC) di Majlis Bandaraya Johor Bahru (MBJB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lau, Hwee Jeen (2010) Kedudukan tuan tanah dan pembeli sebelum pendaftaran pindahmilik terhadap wang pampasan akibat daripada pengambilan balik tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Fadzil Ahmad, Nor Farhana (2010) Kegagalan pelaksanaan caj pembangunan di Majlis Bandaraya dan Majlis Perbandaran di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zaidi, Nur Syamimi (2010) Kelestarian alam sekitar : penilaian kualiti air di kampus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fakharazi , Mohammad Faazil (2010) Kelewatan proses pengambilan tanah - kesan terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Lay Ching (2010) Keperluan latihan kemahiran untuk graduan pengurusan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lee , Chow Siang (2010) Keperluan terhadap Malaysian Land Integrated Information Services (MyLIIS) bagi firma penilaian harta tanah kajian kes : Firma Penilaian di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Mokti, Mohamad Fairuz (2010) Kepuasan pengunjung terhadap perkhidmatan fasiliti di hotel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua, Clara Yian Thin (2010) Kesan pemberhentian skim penempatan semula di Sarawak kajian kes : bahagian selatan bandaraya Kuching, Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad Rodzuan, Nor Sarwani (2010) Kesan teknik peredaan lalu lintas terhadap pengurangan laju kenderaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ee , Lee Chuan (2010) Knowledge management in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Demudu , Suhashini (2010) The knowledge of real estate agents towards the kinesics behaviour of property buyers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ong, Ai Wern (2010) Konsep pembangunan berfasa sebagai strategi pemaju dalam pembangunan projek perumahan berskala kecil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rahim, Noor Syahirah (2010) Kriteria pemilihan projek perumahan terbengkalai dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamzah, Nor Ayunny (2010) Kualiti perkhidmatan fasiliti di Hospital kerajaan - Hospital Sultanah Aminah, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Ali, Noorfadzilah (2010) Kualiti perkhidmatan pembersihan dan persepsi pengurusan pembersihan secara penyumberan luar di pasar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sivaguru, Homanarayani (2010) Landscape development in Seremban Town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wong, Li Bing (2010) Landslide prevention at hilly construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yeong , Weng Harn (2010) Layout optimization and manning ratio improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dianat , Oldooz (2010) Length estimators for two dimensional and three dimensional images using relative direction chain code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Niakan , Ali Asghar (2010) Lost foam casting of LM6-A1-Si cast alloy under pressure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sari , Mehdi Mohammadzadeh (2010) Machinablity of aisih 13 tool steel when using the edm process with carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kek, Bee Wen (2010) Macroeconomic factors affecting house prices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chew , Teong Han (2010) Magnetic field simulation of golay and maxwell coils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sukarsan, Sukarsan (2010) Magnetohydrodynamic accelerator with equilibrium plasma. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong , Sir Min (2010) The maintenance and maintenance fees of gated and guarded community in Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Pang, Li Ting (2010) Marketing strategies adopted by Malaysia top property developers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Aqlima Mat Zin, Nurul Nadia (2010) Masalah pembangunan rancangan kemajuan tanah (RKT) oleh kesedar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Daud, Juniza (2010) Masalah pengurusan perumahan awam kos rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nordin , Nurul Nadia (2010) Mathematical modeling and hybrid heuristic for unequal size facility layout problem and its multiple-document interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pang , Aik Yen (2010) Mathematical modelling in car suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Attaran, Seyed Ahmad (2010) Mechanical thermal and morphological of epoxidized natural rubber toughened polyropylene nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tehrani , Mohsen Habibi (2010) Mechatronics design of sensors and control modules for a small autonomous underwater robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Osman , Rohani Emelya (2010) Mengesan kadar pemendapan di laluan navigasi menggunakan teknik model rupa bumi berdigit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Rahman, Siti Fatimah (2010) Metabelian groups of order at most 24. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Novizon , Novizon (2010) Metal oxide surge arrester degradation detection using shifted current method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husain , Mohamad Fazli (2010) Microbiology influenced corrosion of carbon steel and stainless steel by bacterium, pseudomonas aeruginosa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zubir , Farid (2010) Microstrip reflectarray antenna with minkowski shape radiating element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan , Chuan Keat (2010) Microstructure and mineralogical study of organic soils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Mokhtar , Mutahharah (2010) Microwave sterilization of mushroom growing media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nourbakhsh, Mehdi (2010) Mobile application prototype for on-site information management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Bujang , Siti Dianah (2010) A model checking agent for mobile short message service application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Suaib , Norhayati (2010) Modeling and control of an active suspension system with hydraulic actuator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Amin , Wardatun Nadrah (2010) Modeling of water quality at Pantai Lido estuary using WASP 7.3. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aiffah Ismail , Wan Nurul (2010) Modelling and performance analysis of rotating disc contactor (RDC) column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azman, Noor Fadzillah (2010) Modelling the effects of several factors contributing to unemployment in Malaysia between 2004 and 2008. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Linggang , Didi Amarildo (2010) Monitoring temporal distribution of tropospheric aerosol over land area of Malaysia using NOAA AVHRR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khansary , Kamran (2010) Multiplatform patch management based on peer to peer network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Roslan , Rosfuzah (2010) Multiple genomic features filtration to improve protein-protein interactions prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Efendi , Riswan (2010) Naive weight fuzzy time series for forecasting in a case study for stationary and non-stationary data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Teow , Bee Khuan (2010) Nano sodalite as solid base catalyst for knoevenagel condensation reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Lazin @ Md. Lazim , Md. Norazlan (2010) Natural ventilation tropical greenhouse (nvtg) modeling and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yeap , Wei Chien (2010) Navigasi hidrografi melalui satelit sistem penentududukan sejagat menggunakan perisian navypro. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Janbeglou , Maziar (2010) A network security management approach for WLAN. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lukas , Stelleen (2010) Neural based approach predicting chlorine concentration for drinking water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed Razali , Nurul Aini (2010) Novel synthesis of platinum and electrogenerated zinc loaded on HZSM-5 for isomerization of n-Pentane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Farsadi , Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes waviness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afrooz, Iman Eslami (2010) Numerical investigation of composite materials with short fibers made of carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Qazi , Hummad Habib (2010) Numerical simulation magnetohydrodynamic accelerator with nonequilibrium air plasma. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Nuri @ Md. Din , Nur Rashid (2010) Numerical simulation of aerodynamics effect on an automotive side mirror. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ong , Pei Li (2010) Numerical simulation of blood flow through a multiple stenosed porous medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sulaiman , Mohd. Hafis (2010) Numerical simulation of cold forward extrusion for aluminum A 1100. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rafati , Mahdi Zhaleh (2010) Numerical simulation of fluid flow and heat transfer in a trapezoidal microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chu, Teck Keong (2010) Numerical simulation of generalized newtonian blood flow through multiple severe stenoses with the effect body acceleration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed Ahsan , Amin (2010) Online signature verification using probabilistic modeling and neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Milani , Kaveh (2010) Operational competitivness index for Malaysian container ports. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Handani , Zainatul Bahiyah (2010) Optimal design of water networks involving multiple contaminants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zakaria , Zaifa Haniza (2010) Optimization of fenton oxidation of sulfidic caustics using the response surface methodology (RSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohebi , Ehsan (2010) An optimized thresholding kohonen neural network for cluster analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zakaria , Nur Farha (2010) Optimizing accuracy in deriving priorities in analytic hierarchy process using evolutionary computing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Salimon , Norhidayah (2010) Optimum strategy for the implementation of a decentralized distribution network for industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahwidi , Hussin G. H. (2010) Organizational memory for University Garyounis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Siajam , Shahrul Nizam (2010) The organizational structure and human resource norms for JKR district office with projects below RM10 million. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Razali, Noor Ashikin (2010) Ozone generation using pulsed streamer discharge technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Nasrudin , Farah Suraya (2010) Painleve analysis and integrability of systems of nonlinear partial differential equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Isa, Siti Salehah (2010) Pandangan orang awam terhadap tahap profesional agen harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ng , Su Ling (2010) Parallel calculation of differential quadrature method for the burgers-huxley equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mansor, Nur Hidayah (2010) Parallelization technique of two dimensional heat problem using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sari , Nadra Mutiara (2010) Pedestrian delay at zebra crossing facility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Sin, Nuruladilah (2010) Pelaksanaan pasar tani konsep moden : kajin kes : pasar tani moden Jerantut, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Dzulkifli, Nurul Asyikin (2010) Pemasaran harta tanah di pihak berkuasa tempatan (PBT) kajian kes : Dewan Bandaraya Kuala Lumpur (DBKL). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad , Mohd. Khairolfizal (2010) Pembangunan ekopelancongan di Tasik Bera dan kesannya kepada orang asli Semelai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jusoh, Naziha (2010) Pembangunan empangan Tasik Kenyir dan kesannya terhadap sosioekonomi penduduk tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sia , Nee Nee (2010) Pembangunan industri khinzir yang mampan kajian kes : pusat penyembelihan khinzir di Kampung Berjaya Alor Setar, Daerah Kota Setar, Negeri Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Samat @ Embong , Faezah (2010) Pembangunan taman tema kepada industri pelancongan negeri Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad Yusak , Yuswirda (2010) Pemetaan indeks prioriti lembangan sungai menggunakan data remote sensing dan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamdan, Anis Nafiza (2010) Pemetaan kawasan hijau dan suhu permukaan daratan menggunakan teknik remote sensing dan GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Zainudin, Azi Elliana (2010) Pemetaan kualiti air Sungai Tebrau hasil permodelan qual2k menggunakan teknologi remote sensing dan GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Othman, Khairul Nizam (2010) Pemilihan jenis perumahan bagi kakitangan kerajan di Kota Iskandar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Raja Mohamad Yusoff, Raja Mohamad Fairuz (2010) Pemilihan saluran isyarat elektroensifalografi ketika serangan sawan dengan menggunakan kaedah analisis komponen utama. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Adam , Siti Jaliah (2010) Pendapat pihak penghuni dan pengurusan pangsapuri terhadap pemilihan kaedah pengutipan caj perkhidmatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Azmi , Azimah (2010) Penentuan nilai sewa bagi ruang niaga pasar awam milik pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rosdi, Mohd. Syafiq (2010) Penentuan pampasan berdasarkan Akta Bekalan Elektrik 1990 bagi pemilik tanah yang terlibat dengan izinlalu bagi projek talian penghantaran elektrik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohsin , Aminah (2010) Penentuan tapak pelupusan sisa pepejal dengan menggunakan aplikasi GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wan Mohd. Zaki, Wan Dalini (2010) Pengaruh elemen rekabentuk bangunan terhadap penyenggaraan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Farouk, Mohamad Alhafiz (2010) Pengaruh faktor persekitaran dan kejiranan dalam keputusan pembeli rumah : (kawasan kajian : Taman Mutiara Rini, Taman Impian Emas dan Taman Sri Pulai Perdana). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Bahari, Nurul Anis (2010) Penggunaan abu terbang arang batu sebagai bahan pengisi dalam campuran panas konkrit berasfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustafa, Mohd. Yusnizam (2010) Pengurusan aset alih di bangunan pejabat : kajian kes : Menara Ansar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohari, Nur Ameerah (2010) Pengurusan penyenggaraan pelabuhan perikanan kes kajian : kompleks LKIM Kuantan, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rahman, Noor Shamsia Habeeb (2010) Pengurusan penyenggaraan perkhidmatan utiliti bangunan kediaman berstarat a : kes kajian : Flora Damansara Apartment, Petaling Jaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Manap, Roslan (2010) Pengurusan skim strata kediaman dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khoo, Mei Leng (2010) Penilaian pencapaian program pembasmian kemiskinan bandar kajian kes : Majlis Perbandaran Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Ahmad Azizi (2010) Penjadualan projek untuk pembinaan jalan di kawasan tanah berpaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yoon , Huey Jye (2010) Perbandingan di antara pengurusan tanah perkuburan Cina dengan taman perkuburan Cina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad Sabri, Mohd. Fahmi (2010) Performance of asphaltic concrete using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Niroumand , Hamed (2010) Performance of horinzontal soil hook system in sand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahul Hameed , Mohd. Anwar (2010) Performance of porous asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz , Mohd. Azizi (2010) Performance of stone mastic asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan , Lih Heng (2010) Performances comparison of principal component and linear discriminant analysis based face biometrics using artificial neural network and adaboost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Yuh Taur (2010) Perlaksanaan sistem pengeluaran sijil siap dan pematuhan dari perspektif pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Aini Zainal , Hafizatul (2010) Permasalahan dalam pengurusan buku daftar strata di Pejabat Tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Omar , Aza Elliani (2010) Permasalahan urusan pentadbiran pejabat di Pejabat Tanah Daerah Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Rashid , Nadia Farhana (2010) Permasalahan yang dihadapi dalam penubuhan tadika. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zainuddin, Khairulazhar (2010) Permodelan tiga dimensi menggunakan teknik pengimbasan laser untuk aplikasi kejuruteraan balikan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Haroon , Siti Nor Bakyah (2010) Persepsi ke atas "servicescape" stadium dalam mempengaruhi kunjungan penonton. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Isa, Norhafiza (2010) Persepsi kontraktor terhadap sistem binaan berindustri (IBS) kes kajian : kontraktor Negeri Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yew , Su Mei (2010) Persistence and recover of fingerprint marks from soot covered glass fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yusoff , Mohd. Huzaifah (2010) Personal traits and emotions in behavioral patterns for young motorcyclis t riders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baleg , Sana Mohammed (2010) PH measurement by sol-gel using clad optical fiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sim , Sui Chen (2010) Physical and non-physical factors affecting rental rate for shop unit within shopping centre : some evidence from Johor Bahru City Centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sapin , Noor Liza (2010) Physicochemical properties of nanostructures magnesium oxide prepared via hydration-dehydration assisted by ultrasonic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Norhayat , Siti Norsa`idah (2010) Phytochemicals, biotransformations and bioactivity studies of two varieties of Etlingera Littoralis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Setumin , Samsul (2010) Plate recognition for Malaysian vehicles using stroke analysis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Nasaruddin , Nas Aulia (2010) Portable screen printed carbon electrode for the determination of trace metals and neural network modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kadirin , Noraisah (2010) The potential adoption of relational contracting in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nordin , Zuhaidah (2010) Potential application of virtual references station - real time kinematic technique structural health monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sadi , Mohammadali Kazerooni (2010) Practical guide for demolishing reinforced concrete chimney. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahperi, Rafidah (2010) Prediction on water quality of point source pollution for Lunchoo River, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar , Nurul Saadah (2010) Preparation and characterizations of polyimide-silica hybrid membrane for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Pulakrishnan , Leelavathy (2010) Preparation of carboxylic acids via malonic ester synhesis and it's derivatives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zakaria , Elmi Shahizam (2010) Preparation of ketones and their derivatives via acetoacetic ester synthesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Harudin , Nolia (2010) Preventive maintenance improvement at epoxy cure operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman , Syazana (2010) Process improvement at an engine assembly production line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zamanhuri , Norashikin Ahmad (2010) Production of pineapple powder using microwave assisted spray drying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rijal , Zuraida Zaini (2010) Productivity rate of roof works for JKR school project scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad , Hamidah (2010) Profil pemilik dan keutamaan faktor yang mempengaruhi perpindahan pemilik daripada kediaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Muniandy , Yuvendran (2010) Profiling of illicit cannabis samples using high performance liquid chromatography and multivariate analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammad , Nor Hazlin (2010) Project management maturity and performance measures of project managemen t knowledge areas in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Raid, Maryanti (2010) Projek pembangunan harta tanah secara penswastaan di antara pihak berkuasa tempatan (PBT) dengan pemaju swasta. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mirshahi , Mohammad (2010) The properties of hot extruded binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koleini , Shahriar (2010) The properties of hot rolled binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tay, Hui Fung (2010) Property development and shop unit occupancy level in Kluang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Samah , Rosiah (2010) Proposal for evaluation methodology of competency based project management training. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Hamid , Atikah (2010) Proposal for the enhancement of JKR matrix organization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarzaman, Mohd. Sukri (2010) Pulangan abnormal bagi amanah pelaburan harta tanah di Malaysia (M-REIT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd Fauzi , Noor Akhmazillah (2010) The quality and lipid profiles of heat treated palm oil whole extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Razak, Ahmad Naquiddin (2010) Radiative transfer modeling and simulations of satelite images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ong, Loo Ye (2010) The real estate persuasion tactics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Roslan , Nur Zatul Iradah (2010) Real time estimation of mortierella alpina growth through sodium hydroxide consumption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Yusoff, Wan Ibrahim (2010) Reappraisal of JKR quality management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Mohamad , Wan Zulfadli (2010) Recognition of cylindrical features from 2.5D and 3D prismatic model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chin , Fook Loong (2010) Rectangular patch radiator design with inset feed using transmission line model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lau, Chung Haw (2010) The relevance of listed property firms' annual disclosure with stock market return. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Low , Kok Wai (2010) Reliability of passive hull systems on floating production system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Dzahir, Mohd. Azwarie (2010) Remote control of hand arm robotic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamirun , Muhammad Kamil (2010) Remote sensing technique for crop identification and yield forecasting : a case study of pineapple crop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Noor Basir , Farkhani (2010) Respiration rate estimation of tropical rain forest from landsat ETM+. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hashim , Ahmad Safwan (2010) Roll reduction device for small fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassani , Sara (2010) Rubric matrix for evaluating knowledge management capability by using fuzzy linguistic method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Jan , Rosnita (2010) Rumah kos rendah PBT (council homes) dalam membantu meningkatkan tahap kualiti hidup masyarakat kajian kes : perumahan rakyat MPSJ. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Suprayogi, Dedy Triawan (2010) Savonius rotor vertical axis marine current turbine for renewable energy application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Awang , Che Noorziela (2010) Screening for high naringenin and kaempferol contents from different species of Malaysian medicinal plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Md. Din , Ami Hassan (2010) Sea level rise estimation using satelite altimetry technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zulkepli , Nurkhaizan (2010) Second harmonic generation by diode-pumped solid state laser system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Narayanasamy, Jivasangeeta (2010) Security Management of gated and guarded community in Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sapri, Nurzihan (2010) Selective removal of heavy metal from electroplating industrial wastewater using ion exchange process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Menjon , Suzana (2010) Sensing of carbon monoxide based on palladium (Pd) doped tin oxide (SnO2) thin film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yusoff , Nor Shuhadah (2010) Separation of fingerprint marks from bloodstained material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mahmoud Ali , Waleed Kamaleldin (2010) Service innovation knowledge framework for ICT postgraduate students in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ishak , Nurlaili (2010) Shear behaviour of wire reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Bakar , Mohd. Basri (2010) Shear capacity steel fibre reinforced concrete composite slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansir , Dodo (2010) Sick building syndrome in a university library. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wan Rodi , Wan Norhishamuddin (2010) Sick building syndrome (SBS) in public university office buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hosseini , Nima Babazadeh (2010) Simulation of microchannel heat sink with hotspot(s). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Badri , Mohd. Najib (2010) Simulation of plastic injection moulding of family mould using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Halim , Shamsul Azwan (2010) Simulation of plastic injection moulding part using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baharanchi , Ahmadreza Abbasi (2010) Simulation of turbulent swirling multiphase flow inside a pressure -swirl atomizer using volume of fluid model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail , Azlyana (2010) Simultaneous targeting and design of minimum mass and energy network using graphical pinch analysisapproach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd Razak , Norshifah (2010) Sistem memenuhi pesanan bagi perusahaan kecil dan sederhana pemborongan (SISMUDAH). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Rahim , Nurzalisa (2010) Sistem perolehan reka dan bina bagi projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed , Yusuf Abdinasir (2010) Slenderness study of composite slabs modeled by explicit dynamic procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahidin , Mohammed Ridzuan (2010) Slope stability analysis of critical slope along North South Highway (Southern Region) using limit equilibrium method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pourmohammadi, Samaneh (2010) Slope stability analyze during rapid drawdown in earth dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar , Hamdan (2010) Slope stability using remote sensing and geographic information system along Karak Highway Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nejad , Mohsen Ghasem (2010) Social communication framework for computer assisted language learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Tan , Chun Fui (2010) Solutions of forced Korteweg-de vries burgers' equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Emran, Noor Afizah (2010) Spatial accuracy assessment of the land cover map produced from spot, quickbird and radarsat with reference to cadastral parcels for the development of GIS database system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sharkawi , Khairul Hafiz (2010) Spatial information enhancement for 3D navigation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Amir , Karamoozian (2010) A spectrum-aware region-based routing approach to cognitive radio ad-hoc network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kandasamy , Nachiappan (2010) Speech recognition performance for transcoded speech using adaptation techniques model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Selamat, Siti Norina (2010) The stability of microencapsulated palm oil vitamin e concentrate using spray drying technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Azmi , Fatin Afiqah (2010) Strategi agensi kerajaan untuk memenuhi kuota bumiputera dalam projek perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Ali Alias, Nurul Izzati (2010) Strategi pembangunan bank tanah milik kerajan negeri kelantan : (kajian kes : Jajahan Kota Bharu). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chang, Soon Poh (2010) Strategi pembangunan oleh pemaju bagi mengelakkan masalah "unsold property" di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sulaiman, Khairunnizam (2010) Strategies for managing delay in Mara's building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman , Soraya (2010) Strategies on the investment and resuscitation of abandoned projects. Case study : Selangor and Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Parniani , Sasan (2010) Strength properties of high volume slag cement concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajappan , Rajakumaran (2010) Structural assessment and conditional monitoring of light rail transit (LRT) line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soleimannejadian , Nima (2010) Study in implementing the use of computer on assessments in UTM (FSKSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ramadhena , Citra (2010) The study of the weight sign change of the standard backpropagation network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jahwie , Nurasyikin (2010) Study on car body kit design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khalid, Nazifa (2010) A study on electronic waste (e-waste) in high educational institution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Giwangkara, Grawira Ganjur (2010) A study on marine sand as a jointing material for concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karim, Nur Aqma (2010) Study on soil loss in the Iskandar development region, Johor Bahru using remote sensing and gis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mahadi , Shafaruniza (2010) A study on the application of green function in solving euler-bernoulli beam equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haa , Wai Kang (2010) Suspension bridge modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed , Khalid Ahmed (2010) Sustainable development factors for land development in UTM Johor Bahru campus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong , Ban Hwa (2010) Sustainable furniture design concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Razak , Nor Erma Shuhadah (2010) Synthesis and absorbing properties of oil palm empty fruit bunch filled poly (acrylic acid-Co-acrylamide) superabsorbent polymer composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd Aziz , Norsyariza (2010) Synthesis, characterization and application of poly(Styrene-divinylbenzene)-based monolithic column for high performance liquid chromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Arsad , Siti Rosilah (2010) Synthesis characterization and catalytic activity of Palladium (II) Imine complexes in heck reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Bakar , Faridah (2010) Synthesis of AI-MCM-41. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azahar , Muhammad Syamil (2010) Synthesis of methoxylated and hydroxylated flavonoids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim , Abd Jalil (2010) Tahap kepuasan pekerja terhadap prestasi persekitaran fizikal dalaman pejabat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

How , Lay Lim (2010) Tahap kepuasan pelajar antarabangsa terhadap kemudahan fizikal Universiti Teknologi Malaysia ke arah universiti bertaraf dunia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ranzan, Afiqah (2010) Tarikan dan pembangunan produk pelancongan di Bandar Lumut : kes kajian : Bandar Lumut, Perak Darul Ridzuan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Saleh Ali , Someraa (2010) Temperature sensitivity of a fabricated fiber bragg grating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad, Mazizah Ezdiani (2010) Tensile strength and behaviour of grouted splices integrated with flexible aluminium duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman , Mohd. Faizal (2010) The development of novel in-line drying process in the extrusion of polypropylene-rubberwood fibers composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuah, Seong Jin (2010) The perceptions of professionals on the traffic impact assessment (TIA) report. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Pratiwi , Artdhita Fajar (2010) A three-dimensional gantry crane system using proportional-derivative controller with input shaping approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Miskam , Mazidatulakmam (2010) Three-phase liquid-phase microextraction for the determination of partition coefficient and analysis of nitrophenols. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nawawi , Amir Azmi (2010) Time compression using fast track approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lai, Cing Xin (2010) Transient solution to fluid flow in cavity with stretched coordinae system using constrained interpolated profile navier stokes equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Almaktar, Mohamed A. M. (2010) Transmission pricing technique using modified Irish scheme for pool electricity market. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Arsad , Azilah (2010) Trends analysis on rainfall data over west and east Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sapar , Sakilah (2010) Unstructured grid using triangular elements for finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zakaria, Nurhafizah (2010) Urban wastewater design towards effectiveness management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shuib , Shazri (2010) User perspective on existing green building index (GBI) assessment criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaswadi, Farizana (2010) Experimental and finite element investigation of dynamic behavior of chassis-PCB assembly of electronic products. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Rashid, Siti Nafisah (2010) Simulation of dual fibre bragg gratings as a fabry-perot tunable filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lim, Meng Hee (2010) Application of wavelet transform analysis for the diagnosis of blade faults in rotating machinery. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Medugu, Idris Nasiru (2010) An assessment of afforestation programme towards combating desertifi cation in Kano and Jigawa states Negeria. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Ahmad, Yusof (2010) Bending behavior of timber beams strengthened using fiber reinforced polymer bars and plates. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Ahmad, Fauziah (2010) The branding realization of entrepreneurs in small and medium sized enterprises. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Muthuveerappan, Chitrakala (2010) Building structural quantity measuring algorithm using drawing element recognition in two-dimensional structural drawing. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Ahmadi, Mohammad Taghi (2010) Carbon nanotube and silicon nanowire nanoscale field effect transistor modeling. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Shamsan Abdo, Zaid Ahmed (2010) Coexistence of international mobile telecommunications - advanced system with fixed wireless and broadcasting services. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Amri, Idral (2010) Comparison between axial and backflow model of ion exchange system for heavy metal removal. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Arsad, Agus (2010) Compatibiliser effects on properties of polyamide-6/acrylonitrile-butadiene-styrene and polyamide-6/acrylonitrile-butadiene-styrene/short glass fibrethermoplastic composite. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Mohd. Zain, Azlan (2010) Computational integration system in estimating optimal solutions of machining parameters. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

See, Hong Heng (2010) Cone-shaped membrane microextraction methods for the analysis of pesticides. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Yeow, Yoon Foo (2010) Critical factors for the implementation of total quality management in construction project management. PhD thesis, Universiti Teknologi Malaysia, Pusat Perniagaan Teknologi Termaju.

Mansourizadeh, Amir (2010) Development of hollow fiber membranes for carbon dioxide absorption in gas-liquid membrane contactors. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Mohd. Hashim, Mohd. Hisbany (2010) Durability and performance of carbon fibre reinforced polymer-concrete bonding system under tropical climates. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Samosir, Ahmad Saudi (2010) Dynamic evolution control of bidirectional converter for interfacing ultracapacitor to fuel cell. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Lee, Zhi Sam (2010) Enhanced feature selection method for illicit web content filtering. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Lo, Po Kim (2010) Excretory overexpression for recombinant cyclodextrin glucanotransferase in Eschericha coli. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Muda, Khalida (2010) Facultative anaerobic granular sludge for textile dyeing wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Khalil, Mohammed Mohammed Sayim (2010) Fingerprint verification based on statistical features of co-occurre nce matrices. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Zakaria, Zalmiyah (2010) Genetic-based approaches to predictive-reactive scheduling in flexible manufacturing system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Mohd. Hussain, Mohd. Ramzi (2010) Geographic information system implementation issues in the planning departments of Kaula Lumpur City Hall, Malaysia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Ahmed, Aboamama Atahar (2010) Grid mapping function for automatic resources discovery and selection for sequential and parallel visualization pipeline. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Shanmugam, Bharanidharan (2010) A hybrid intelligent intrusion detection system using fuzzy logic and improved packet tracing model. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Mohd. Samin, Pakharuddin (2010) Hybrid stability augmentation system-force control of semi-active suspension with magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohamad Yusoff, Izham (2010) Influence of geo-referencing in three-dimensional geographic inforamation system applying for dynamic rainfall-runoff modelling. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Daud, Zulkiflee (2010) The influence of grievance handling determinants on the selection of grievance handling styles. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Alhakimi, Wail Sultan Abdullah (2010) An investigation of market orientation in Yemen's consumer goods industry. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Ali, Raudhah (2010) Kompetensi dan personaliti guru kaunseling Sekolah Menengah di Bandar Raya Semenanjung Malaysia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Mohd. Noor, Norliza (2010) Lung diseases detection based on statistical discrimination for some respiratory disease. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Saleh, Alireza Tavakolpour (2010) Mechatronic design of intelligent active vibration control systems for flexible structures. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Raji, Fauziah (2010) Modes of privatisation for property development projects. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Siti Rochimah, Siti Rochimah (2010) Multifaceted requirement traceability approach to support software evolution. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Khan, Amjad Rehman (2010) Offline cursive handwritten character recognization using heuristics techniques. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Magaji, Nuraddeen (2010) Optimal location and control of flexible alternating current transmission system devices for oscillations damping. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ahmed, Mohammad Masroor (2010) A parameteric model for the segmentation of brain magnetic resonance images. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Nawawi, Sophan Wahyudi (2010) Partial feedback linearization control for a class of two wheeled mobile robot. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Mohd. Noor, Norzailawati (2010) Pemodelan serakan guna tanah tidak terancang menggunakan integrasi imej beresolusi tinggi dan sistem maklumat geografi berasaskan Cellular Automata. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Al Amri, Abdullah Ali (2010) The performance of membrane bioreactor in treating high temperature municipal wastewater. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Kasim, Azman (2010) Physical and optical properties of neodymium doped and neodymium/erb ium co-doped tellurite glass system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Eisazadeh, Amin (2010) Physicochemical behaviour of lime and phosphoric acid stabilized clayey soils. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Mohammed Merdhah, Amer Badr (2010) Prediction and treatment of scale formation during water injection. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Wong, Chee Sien (2010) Process development for adsorption of latex serum proteins on magnetic chitosan particles. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Ali, Mohd. Tarmizi (2010) A reconfigurable antenna array and beam switching for 5.8 GHz point - to- multipoint applications. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Abdul Majid, Roshida (2010) Rekabentuk tingkap dan pemandangan dalam pembangunan perumahan teres satu tingkat. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Said, Suzana (2010) The shape grammar of traditional Malay houses. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Arifin, Ramli (2010) Sifat fizik, mekanik, optik dan spektroskopi kaca tellurit zink oksiklorida didopkan europium. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Al Fahmey Abdul Rahim, Mohammad Yussuf (2010) Sources of quit rent arrears. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Umar, Nouruddeen Bashir (2010) Surface leakage current charaterization of ageing transmission line glass insulators. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Rismana, Eriawan (2010) Synthesis, characterization and dielectric properties of cadmium sulfide polymer nanocomposites. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Sunardi, Sunardi (2010) Target strength fish identification for scad species of the South China Sea. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Abdullah, Sahadah (2010) A technique for balancing and smoothing multi-constraint assembly lines. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Chong, Kuan Eng (2010) Technology entrepreneur development at graduate training in Malaysia institute of higher learning. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Al-Hetar, Abdul Aziz Mohammed Ali (2010) Thermo-optic polymer switches based on multimode interference couplers. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Wong, Yu Cheng (2010) A lean manufacturing implementation framework for the Malaysian electrica l and electronics industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nik Yahya, Nik Fatma Arisya (2010) A study on the level of statisfaction of lecturers towards the physical environment in their office room. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Saleh, Azrul (2010) Amalan pengurusan konflik dalam kalangan pembantu penguasa kastam gred W26 di Kastam Di Raja Malaysia Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamad, Khairul Anuar (2010) An evaluation of statistical model for downscaling precipitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Norhanisah (2010) Anti-aging serum formulation based on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hanani Zainuddin, Nurul Fatin (2010) Biodegradability and properties of polylactic acid/polycaprolactone/montmorillonite/metallocene linear low density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Nayan, Nadirul Hasraf (2010) Characterization and biodegradability of foam based on coconut flesh waste-filled high density polyethylene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ashenagar, Javid (2010) Comparative assessment of trip generation category analysis and regressio n modelling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdurahim, Mohd. Ezzad Iskandar (2010) Curing characteristics and tensile properties of natural rubber/expoxidized natural rubber-50 nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chermahini, Siavash Hosseinpour (2010) Decolorisation of cashew leaves extract with activated carbon in tea bag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Md. Khudzari, Jauharah (2010) Determination of heavy metals in hair of sanitation workers using the method of EDXRF. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim, Mohd. Hanifah (2010) Development of energy harvesting device using piezoelectric material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eltieb Ali, Nsreldeen Ibrahim (2010) Double negative metamaterial incorporated with microstrip antenna for wireless application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rosli, Noor Afizah (2010) Effect of styrene maleic anhydride on poly(vinylchloride)/polystyrene blends : mechanical and thermal properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Koay, Chee Ming (2010) Equipment failure mode and effects analysis (FMEA) in Altera Corporation (M) SDN. BHD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seng, Chin Loon (2010) Evaluation of metal nutrient from sewage sludge on growth of medicinal herbs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Siti Nor Haizum (2010) Factors affecting employee engagement : case study at SIRIM Berhad and Telekom Malaysia Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lee, Chong Zen (2010) Factors affecting industrial purchase of hygiene chemical in food processing factory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Habeeba, Fathimath (2010) Factors associate with knowledge sharing among nurses in Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Al-Agaga, Ameen Mahdi K. (2010) Factors that influence e-loyalty of internet banking users. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Kadir, Kartini (2010) Faktor kejayaan kritikal usahawan Melayu di negeri Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Isman, Sumi (2010) Faktor kepimpinan dan sistem ganjaran dalam mempengaruhi kreativiti dan inovasi pentadbiran di Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Fakharazi, Hayder (2010) Flexural behavior of wire-reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Siti Badariah (2010) Gaya pembelajaran dan pemilihan mod penyampaian latihan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Rahim Omar, Ahmad Yusran (2010) Hubungan antara gaya kepimpinan transformasi dan transaksi dengan kepuasan kerja : kajian kes di Hospital Tengku Ampuan Afzan, Kuantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Aris, Mohd. Syawal (2010) Hubungan antara iklim organisasi dengan pendekatan pembelajaran di tempat kerja : kajian di kalangan Pegawai-Pegawai Tadbir dan Diplomatik gred M41 di Jabatan Perkhidmatan Awam Malaysia, Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Liew, Lee Yin (2010) Hubungan antara iklim organisasi dengan prestasi kerja di kalangan pekerja-pekerja di Leeden Sdn. Bhd. Shah Alam, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohd. Yusoff, Idris (2010) Hubungan antara kaedah pembelajaran informal dengan tahap penglibatan di kalangan staf Pejabat Hal Ehwal Pelajar, Universiti Teknologi Malaysia, Skudai Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Norhisham, Norshiba (2010) Hubungan di antara kontrak pekerjaan dan persepsi pekerja terhadapnya dengan kepuasan kerja di Suria Group, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Sungep, Nor Asman (2010) Hubungan faktor-faktor motivasi dengan kepuasan kerja : satu kajian di kalangan pensyarah-pensyarah Kolej Islam Johor, YPJ di negeri Johor Darul Takzim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Nordin @ Bahari, Baharin (2010) Hubungan gaya kepimpinan transformasi dengan prestasi kerja dalam kalangan ketua-ketua unit di Bank Simpanan Nasional negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohd. Yusof, Musyrifah (2010) Hubungan kecerdasan emosi (EQ) dengan kepuasan kerja dalam kalangan jurutera kualiti Sime Darby Engineering, Pasir Gudang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Amat, Nurul Fauziana (2010) Impak teknostres terhadap komitmen organisasi di Perpustakaan UTM dan UTHM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Salimnezhadghareziaeddini, Aida (2010) Information system in out-patient clinic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasan Saleh, Aayed Qasem (2010) International and local students' satisfaction of healthcare services. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Yusof, Nur Zulaikha (2010) Isolation and application of violet pigment extracted from Chromobacteriu m violaceum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alias @ Che Rashid, Noor Izawati (2010) Isolation, expression and characterization of recombinant a-L-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhamad Nor, Cacok @ Muhathir (2010) Jenis personaliti dan gaya kepimpinan transformasi jurulatih : satu kajian di Pusat Latihan Polis Marin (PULAMAR) di Tampoi, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Salleh @ Abdul Kadir, Afizan (2010) Kesan Kursus Asas Perkhidmatan (KAP) terhadap prestasi pegawai Lembaga Hasil Dalam Negeri Malaysia (LHDNM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Malia, Norazima (2010) Kesan latihan kecerdasan emosi dalam kalangan pekerja awam khas Pejabat Hutan Daerah Bentong, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Zainal Abidin, Mohd. Nazrul (2010) Keutamaan pembelian rumah bagi golongan muda kes kajian : Bandar Raya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Othman, Azizah (2010) Kompetensi dan hubungannya dengan prestasi dalam kalangan pentadbir bukan akademik Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abu Yazid, Zaidatul Nadiah (2010) Komunikasi doktor-pesakit dan kemahiran pencarian maklumat : kajian kes di Hospital Tuanku Ampuan Najihah, Kuala Pilah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Harsani, Nadia Hendrawati (2010) Learning environment and its effect on training effectiveness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hassan, Nursia (2010) Magnetic separable photocatalyst beads for chromium (VI) reduction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dolah, Mohd. Shukri (2010) Masa respons terhadap aduan pelanggan dalam kerja penyenggaraan fasiliti bangunan kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nawi, Nor Hidayu (2010) Mathematical modeling of mass transfer for tear shape drop in rotating disc contractor column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jaya Abdullah, Mohd. Mukhlis (2010) Measuring performance of maintenance contractors in Royal Military Air Force base in Subang, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yahya Ali Nusair, Abdulmalek (2010) Measuring service quality in an academic library from the perspective of local and international students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Zubir, Farid (2010) Microstrip reflectarray antenna with minkowski shape radiating element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Mustafa, Esam Mohamed (2010) New motivational scheme and organizational performance enchancement : a case study of Alnil Academy in Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Nik Mat, Nik Hazlina (2010) Pengaruh elemen pesekitaran fizikal dan kelakuan ke atas produktiviti pekerja di pejabat universiti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ramly, Fariha Aiza (2010) Pengaruh gaya kepimpinan pengurusan terhadap komitmen pekerja bukan eksekutif dalam organisasi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Anshah, Siti Aminah (2010) Pengesanan pegerakan struktur menggunakan model autoregresi purata bergerak bersepadu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hashim, Ismail (2010) Pengurusan organisasi dan perkongsian pengetahuan di Jabatan Kastam Diraja Malaysia Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohd. Ali, Maslina (2010) Perbezaan pola amalan menangani konflik di kalangan Penguasa Kastam gred W41, di Jabatan Kastam Diraja Malaysia, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lek, Hsiao Yen (2010) Perceived importance of e-journals and it's association with e-satisfaction among international postgraduate students in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Soo, Pei Woon (2010) Personaliti dan komitmen terhadap organisasi antara dua buah industri pembuatan antarabangsa di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Sulaiman, Mohd. Isa (2010) Petunjuk prestasi utama kontrak pengurusan fasiliti kompleks kastam, imigresen dan kuarantin, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zakaria, Elmi Shahizam (2010) Preparation of ketones and their derivatives via acetoacetic ester synthesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tengku Azhar, Tengku Norbaya (2010) Problems on commercialization of genetically modified crops in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Hayat, Abd. Muizz (2010) Product quality, counter service and satisfaction on mobile broadband service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohammad, Nor Hazlin (2010) Project management maturity and performance measures of project management knowledge areas in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Mohd. Zahirin (2010) Proses pembangunan tanah di bawah seksyen 204D Kanun Tanah Negara 1965 di Pejabat Tanah daerah Tampin, Negeri Sembilan Darul Khusus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chung, Davis Boon Poh (2010) Relationship between employer branding and talent retention in company A (automation and engineering company). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Yunos, Muhamad Zaini (2010) Rice straw fiber reinforced thermoplastic starch : effects of fiber content and sizes, starch type and glycerol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmat Nor, Nor Irwan (2010) Sistem pengurusan kualiti sumber air kajian kes: loji air Sri Gading,SAJ Holdings SDN BHD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Nik Yahya, Nik Nurul-Hidayah (2010) Sourcing strategy for facilities management in intelligent building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jibril, Jibril D. (2010) Sustainable solid waste management in Universiti Teknologi Malaysia (UTM) toward making UTM a sustainable university. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed Ali Mohammed Sultan, (2010) Techno-economic analysis of compressed natural gas carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan @ Md. Sani, Muhammad Hafidzuddin (2010) The effect of plastics compositions and heating rates on the microwave-induced pyrolysis of mixed plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tee, Chai Huat (2010) The impacts of service quality and customer satisfaction on customer's repatronage intentions in hotel industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Wong, Chiew Bing (2010) The influence of personality traits on entrepreneurial intention among selected students of Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Terlokchand Singh, Arveen Kaur (2010) The relationship between cultural factors and knowledge sharing in Kulim microprocessor organization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Daud, Rafizah (2010) The relationship between government support and performance of herbal small and medium enterprises in Johor and Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Koammapat Sam Ruai, Malisa (2010) The relationship between informal workplace learning and job satisfaction among property executives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Al-Amdi, Sam Abdullah Hussein (2010) The relationship between leadership style and job satisfaction among academic in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chang, Shuo (2010) The relationship between self-concept and career maturity in career development a study of management student in University Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Muhammad, Eaniemarina (2010) The use of visual and verbal cues as online branding elements on tourism website. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

He, Bo (2010) What factors affect university research commercialization in China? : a case study on Northeastern University. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mat Dawi, Norazryana (2010) The relationship between organizational cultural factors and knowledge management : a case study at SAJ Holdings Sdn. Bhd. Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chong, Mun Hwa (2010) Comparison of real blood and synthetic blood for blood spatter pattern determination on various matrices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Asad, Farhatul Muminah (2010) Optical properties of dye sensitized zinc oxide thin film deposited by sol-gel method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Aziz, Mohd. Khairul Bazli (2010) Stochastic modeling of the C. Acetobutylicum and solvent productions in fermentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yunos, Nurul Hidayah (2010) Loading capacity and release property of piperine loaded silica aerogel and silica xerogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Olyazadeh, Roya (2010) Two dimensional network adjustment and deformation analysis via MATLAB. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Chew, Teong Han (2010) Magnetic field simulation of golay and maxwell coils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd Hairi, Haryana (2010) A novel idea of using soliton in fiber bragg grating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Hwi Fen (2010) The absolute method of neutron activation analysis using triga neutron reactor, nuclear agency, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed Suliman, Ali H. (2010) Using HEC-RAS and qual2e to assess Johor River water quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adenan, Nur Hamiza (2010) Mathematical modelling of earthquake induced vibrations on multistory buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Loh, Chee Kin (2010) Simulation of natural convection heat transfer in an enclosed cavity using Constrained Interpolated Profile Navier-Stokes Equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Eslami, Seyyed Mohammad Reza (2010) GIS application for assessment of low-impact development effects on stormwater runoff. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Rashid, Siti Nafisah (2010) Simulation of dual fibre Bragg gratings as a fabry-perot tunable filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jemale, Alia Sofie (2010) Mixed-mode silica monolith as an efficient separation medium for capillary electrochromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aziz, Farhana (2010) Preparation and characterization of Para-Phenylenediamine cross-linked polyimide membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Al-Husaini., Issa Suleiman Issa (2010) Heavy metals in marine sediments, water and fish of single buoy moorings (SBM3), Mina Al Fahal, Sultanate of Oman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Sidek, Mohd Saufi (2010) The removal of chromium (VI) and phenol from industrial waste waters mediated by Acinetobacter haemolyticus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mokhtar, Idris (2010) Pewartaan kawasan lapang di bawah Seksyen 62 Kanun Tanah Negara (kajian kes : Kawasan Pentadbiran Majlis Daerah Pontian). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hassan Ali, Abdinasir (2010) Analysis and implementation of security algorithms for wireless communications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdolahi, Ahmad (2010) High speed electroplating of nickel over stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruddin, Aisyah Nabilah (2010) Mixed integer programming (mip) model for production scheduling in an automotive part company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Madhloom Al-Khafaji, Ali Abdulhussain (2010) System identification of flexible plate structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shayganpour, Amirreza (2010) Evaluation of significant factors in aluminum lost foam casting using doe approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirazi, Arash Nasrollahi (2010) Finite element simulation of three surgical treatments of distal radius intra-articular fracture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustafa, Farahiyah (2010) Fabrication and characterization of planar dipole antenna and schottky diode for on-chip electronic device integration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gan, Teik Kun (2010) Decision making for capacity planning in a make-to-order company using mixed integer programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muniandy, Kavitha (2010) Optimization of recombinant amylase expression using response surface methodology (RSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Zainol Abidin, Khairunnisa (2010) Screening for high kaempferol content from different species of Malaysian medicinal plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Abdullah, Kilausuria (2010) Migration virtual trusted platform module state using TPM emulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Indera Putera, Ku Anis Shazura (2010) Antimicrobial activity and cytotoxic effects of stachytarpheta jamaicensis (L.) vahl crude plant extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering .

Yaacob, Maslina (2010) Benzocyclobutene polymer in glass multimode interference thermo-optic switch. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Noor Batcha, Mohamed Farid (2010) Implementation of reconfigurable viterbi decoders in hardware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saad Elmunafi, Mohamed Handawi (2010) Performance evaluation of wiper coated ceramic tool when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Khoei, Mohammadreza (2010) Supply chain management information system (SCMIS) a case study in vamco (Axle Manufacturing Factory). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Majed, Mohammed (2010) Coexistence between the Mobile Service and Terrestrial - Digital Video Broadcasting in the 790-862 MHz frequency band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kunashegaran, Hamsawahini (2010) Chemometric approach for the discrimination of petroleum based accelerants from fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

khalid, Noor khafifah (2010) Particle swarm optimization for solving DNA sequence design problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lani, Norziana (2010) High speed nickel plating on difficult to plate metal(Aluminium). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Mohd Salleh, Zuan Azhary (2010) Heat stress on 500-660 mm pipe workers in oil rig jackets assembly welding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Salleh, Zuliazura (2010) Analysis on the flow and pressure distribution for actual stenosis in trachea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Pouralinazar, Farzad (2010) Accelerated solvent extraction of bioactive compounds (Sinensetin) from orthosiphon stamineous and optimization of process parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasim, Azlin Shafrina (2010) Acidic mesoporous a1-containing MCM-41 for friedel-crafts alkylation of meta-cresol to 2-tert-butyl -meta-cresol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mardiyono, Mardiyono (2010) Adaptive architecture for radio frequency identification middleware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Che Kamaruddin, Naadira (2010) Adequacy of contract provision in managing construction failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sarshar, Parvaneh (2010) Adoption of business continuity planning in IT services case study : MyLinE. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Hussin, Mohd. Bakery (2010) Analisis statistik bentuk untuk pengkelasan data kraniofasial. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abd. Khalil , Muhamad Khairi (2010) Analysis of cold-formed steel connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nasir (2010) Challenges in coordination process for tall building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusoh, Faridah (2010) Chemical structure and compatibility of chitosan and nylon - 6 blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ab. Jabal, Mohamad Faizal (2010) Close spanning tree algorithm for error detection and correction in computer-aided design drawing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jusoh, Norhafizah (2010) Comparison of system performance between led and laser diode fiber optic links using eye pattern test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khanmirzaei, Mohammad Hassan (2010) Computation of detective quantum efficiency of medical x-ray radiographic screen-films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Minhat, Ade Erawan (2010) Determination of rain rate distribution and rain cell size from the Malaysian meteorological radar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Pang, Li Sim (2010) Enhanced genetic algorithm with simulated annealing in solving travelling salesman problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hasan, Shafaatunnur (2010) Enhanced self organizing map with particle swarm optimization for classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Khalilian, Ahmad Tabeh (2010) Enterprise information systems' projects management portfolio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Salahuddin, Siti Nur Hafizeanie (2010) Factors influence construction time performance for IBS in Malaysia Construction Industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Mukred, Muaadh Shaif (2010) A hybrid method for iris segmentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Yusof, Puteri Juieta Salwanni (2010) Investigation on crack problems of precast box culverts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawi, Lizi Wiriana (2010) Kefahaman penghuni dan orang awam mengenai pembangunan perumahan komuniti berpagar dan perpengawal (GACOS) di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Darafshani, Mehri Esmaeili (2010) Lie group structure for the first problem of stoke’s for rotating flow of third grade fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Dasman, Anisah (2010) Mixed convection boundary layer flow of a viscoelastic fluid past a sphere. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Erfani, Mostafa (2010) A modified PSO with fuzzy inference system for solving the planar graph coloring problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mnati, Mustafa Nasser (2010) Multiple watermarking in segmented image using wavelet transform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Aljuaid, Hanan Abdulrahman (2010) Offline arabic character recognition using genetic approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Nashan, Aimi Mohammed (2010) Penentuan harga rumah berdasarkan faktor-faktor mikro. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Anshah, Siti Aminah (2010) Pengesanan pegerakan struktur menggunakan model autoregresi purata bergerak bersepadu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Omar, Nur Shahirah (2010) Perlaksanaan Sistem Binaan Berindustri (IBS) bagi mengatasi masalah dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Surayati (2010) Sequence comparison latent semantic analysis and support vector machine to detect remote protein homology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Nur Shuhada (2010) A simple trigonometric model for estimation of the output illumination distributionsfrom a multiple light emitting diodes configuration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sulaiman, Hamzah Asyrani (2010) Spatial object median rules in bounding-volume hierarchies for complex environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Movassaghi, Mohammad (2010) A study on rock throw phenomena in boulder controlled blasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roslan, Bibi Aishah (2010) Surface roughness and infra-red study of diamond-like carbon thin films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chung, Kuet Siong (2010) Unsteady mixed convection boundary layer flow from elliptic cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Havez, Nadia Fitri (2010) A web-based database system for NOAA AVHRR data from FKSG receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Bhathal Singh, Sharanjit Kaur (2010) Web based knowledge sharing framework for community of practice-senior citizen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Adnan, Fadzilah (2010) Work improvement at an engine assembly line at car manufacturing plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chye, Mei Sian (2010) A boundary integral equation for the exterior neumann problem on multiply connected region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bostan, Hamed (2010) Neural network for prediction of cysteine disulphide bridge connectivity in proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Lorpunmanee, Siriluck (2010) Adaptive intelligent grid scheduling system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Jusoh, Mazura (2010) Development of a novel system for progressive freeze concentration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ghainani, Alireza Tavakoli (2010) Digital protection scheme for distance relaying of a six-phase power system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salleh@Sallehuddin, Roselina (2010) Hybridization of nonlinear and linear models for time series forecasting. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Teh, Yuan Ying (2010) New rational and pseudo type runge kutta methods for first order initial value problems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jambak, Muhammad Irfan (2010) A scaled-down prototype of transmission line for six-phase conversio n under transient overvoltage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Tin Sin (2010) Simulation and experimental characterizations of polyvinyl alcohol-cassava starch compound for injection moulding application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mailok, Ramlah (2010) Sistem maklum balas personal berasaskan web menggunakan pendekatan logik kabur bagi kursus bahasa pengaturcaraan C++. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loghmanian, Sayed Mohammad Reza (2010) Structure optimization of dynamic system model using multi - objective genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Okonkwo, Uche Kennedy A. (2010) Time scale domain wireless channel characterization for mobile communication systems. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Yadollahie Kakh, Hassan (2010) Application of fuzzy logic in cognitive radio networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Talebi, Amir (2010) Measuring the success of UTM e-learning system based on Delone and Mclean's information systems success model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ismail, Fairuz Diyana (2010) Modeling and simulation for the equilibrium of single mode fiber fusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chin, Fook Loong (2010) Rectangular patch radiator design with inset feed using transmission line model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Puniran, Roime (2010) Routing optimization using antella for peer-to-peer in an enterprise network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd Rahman, Mohd Khirulerwan (2010) Performance evaluation measures for adaboost algorithms in face detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kamil Kamal, Norashikin (2010) Peranan pihak berkuasa tempatan dalam menangani isu pembangunan di kawasan bukit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad, Nor Azhar (2010) An enhanced LZ77 algorithm with hash table to compress large scale DNA sequence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Sabri, Nur Ain Ayunni (2010) Solving ordinary differential equations (ODES) and delay differential equations (DDES) using Nakashima’s 2 stages 4Th order Pseudo-Runge-Kutta method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lukman, Nurlaili (2010) Pengukuran masa perjalanan dalam menentukan kesesuaian lokasi industri berdasarkan Sistem Maklumat Geografi (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Shamim Shazlin (2010) Aplikasi Sistem Maklumat Geografi (GIS) dalam pemilihan kesesuaian lokasi restoran (kes kajian: restoran KFC kawasan MBJB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Prima, Silviana (2010) Information personalization for e-government service in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kubong, Suzy (2010) Pemilihan Tanjung Manis sebagai nod pertumbuhan baru dalam Koridor Tenaga Boleh Diperbaharui Sarawak (SCORE). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Omar, Burhanuddin (2010) Kajian faktor ketidakpatuhan peraturan – peraturan elektrik 1994 dalam pengurusan bangunan kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chung, Boon Poh (Davis) (2010) Relationship between employer branding and talent retention in company A (automation and engineering company). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdullah, Zainab (2010) Thermal analysis of thermoplastic elastomer materials due to electrical tracking phenomena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Syed Samaldin, Sharifah Haslina (2010) Penyediaan fasiliti orang kelainan upaya penglihatan di sekolah-sekolah pendidikan khas (kes kajian: sekolah-sekolah pendidikan khas bermasalah penglihatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nordin, Nordiana (2009) Two-stage copper(II) and nickel(II) removal using rubber wood shavings and strontium alginate immobilized bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Musa, Nor Muniroh (2009) Electronic structure simulation of gallium arsenide clusters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yau, Sui Feng (2009) Chemical constituents and bioactivity of Malaysian and Indonesian kaempferia rotunda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Guai, Yeu Kae (2009) Turbine blade crack detection using vibration testing methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lai, Zheng Bo (2009) Classical and damage mechanics-based models for lead-free solder interconnects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nordin, Nordiana (2009) Two-stage copper(II) and nickel(II) removal using rubber wood shavings and strontium alginate immobilized bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramli, Muhamad (2009) Alternative strip method for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husin, Norafifah (2009) Application of design of experiment techniques in the two step pretreatment proses for diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soh, Wen Hann (2009) Effect of oil palm fibre addition on the mechanical properties of shell mould investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaifuddin Zamrah, Zarak (2009) Cost analysis software development for injection moulding in the concurrent engineering environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yerzhan, Abylkhanov (2009) Improving oil recovery in Kazakhstan oilfields by using polyacrylamide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Hasan, Noraini (2009) Application of EM algorithm on missing categorical data analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohmad Zakwan@Zakuan, Norhayati (2009) Structural analysis of total quality management, ISO/TS16949 and organizational performance in Malaysian and Thailand automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Latif, Amminudin (2009) Relationship between international roughness index (IRI) and present serviceability index (PSI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Al-Malsi, Abdulrahman (2009) Dual band active microstrip monopole antenna for wireless local area network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rashvand, Pooria (2009) Energy and CO2 emission evaluation of concrete waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Asmida (2009) Tracking of a person in semi-dense crowd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jumadi, Azlina (2009) An integral equation method for solving exterior Neumann problems on smooth regions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azhar, Latisya (2009) Discrimination between cat and dog hairs using numerical morphology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Farshchi, Iman (2009) Soil-root interaction and effect on slope stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koay, Boon Wooi (2009) Development of single board computer based on 32-bit 5-stage pipeline RISC processor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Nurlida (2009) SVC supplementary controller for damping oscillations in power system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

As’Arry, Azizan (2009) Experimental design, analysis and simulation of human-like hand tremor behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Sabariah (2009) Effect of temperature on submerged membrane activated sludge reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sia, Ee Hou (2009) Deformation analysis of reinforced earth wall subjected to applied loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Salim, Nazaratul Ashifa (2009) Speciation and total determination of arsenic, chromium and selenium in freshwater bodies sediment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aris, Khairun Nissa (2009) Pelaksanaan lelongan awam daripada perspektif pentadbir tanah – kajian kes di Pejabat Daerah dan Tanah Kuantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Sanusi Arifin, Ab. Arif (2009) Information security curriculum framework at undergraduate level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Al-Othmani, Abdulaleem Zaid Mohammed (2009) Prototype development of VOIP steganography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Chiew, Yeong Shiong (2009) Design of a six degree of freedom motion platform for vehicle driving simulator application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Zulkifli, Mohd. Zaid Waqiyuddin (2009) Application of trusted computing in internet voting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ab. Rahman, Nurul Hidayah (2009) A prototype to evaluate information security awareness level for teacher and student in secondary school. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mirghaderi, Parisa (2009) Online database inventory for bookstore management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mariasusai, Stephen (2009) IT security requirement analysis for maritime industry – commercial shipping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Tan, Hai Hong (2009) Computer simulation and design of composite fire door under elevated temperature using MSC nastran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Muftah, Ahmed Jabr (2009) Document plagiarism detection algorithm using semantic networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Behravesh, Babak (2009) A rule modeling engine for complex event processing (a case study on passive RFID for a virtual shopping mall). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ismail, Ismahafezi (2009) Pembangunan laman web pencarian kerja dengan aplikasi second life. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ismadi, Ismairiyanti (2009) Sistem penyelenggaraan pokok ladang kelapa sawit “Geo-Plantation”. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Muda, Mohd. Hilmi (2009) Two-layer SVM classifier for remote protein homology detection and fold recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Sulaiman, Mohd. Sufyan (2009) Sistem pengautomatan pembukaan jeriji ketika kebakaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mobarhan, Rokhsareh (2009) Linking itil with outsource services case study : Center of Information Communication Technology in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdullah, Azeana (2009) Performance of modified cold dense graded asphalt mix using oil palm fruit ash (OPFAsh). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mosavat, Masoumeh (2009) Change order causes and control in the oil and gas construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muda, Mohd. Fakri (2009) The properties and flexural behaviour of self compacting concrete using rice husk ash and admixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harun, Mohd. Harzazi (2009) Highway maintenanance management : case study at Projek Lebuhraya Utara Selatan (PLUS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Satar, Mohd. Khairul Idham (2009) Development of software for rigid pavement thickness design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahab, Muhammad Hanis (2009) Emissions of gaseous and particulate pollutants of ocean-going vessels in Johor Port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahmalan, Muhammad Taufiq (2009) Electrocoagulation for suspended solid removal in domestic wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nadiah (2009) Ball and beam balancer control using microcontroller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nam, Kok Wai (2009) Thumbprint preprocessing using altera cyclone DE2 board. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Noor Ezan (2009) A digital signal processing approach to analyze gel electrophoresis image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Nor Arymaswati (2009) An application of observer for position sensorless stepper motor drives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Tarmizi, Noor Fadzillah Hanim (2009) Co-channel interference studies between high altitude platform and terrestrial system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salim, Norhafiz (2009) Load flow model for UPFC with ESS and ATC determination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Nur Izzaitie (2009) Projek agropolitan sebagai usaha dalam memajukan Tanah Rezab Melayu (TRM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Megat Yunus, Puteri Nor Ashikin (2009) A passive damping network for single phase matrix converter operating as a rectifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahya@Atan, Roshayati (2009) Service discovery protocols using JINI. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab. Rahman, Rosnita (2009) Modelling of trip generation based on school attraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al-Gailani, Samir Ahmed (2009) Lighting system for camera barcode detector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Setumin, Samsul (2009) Plate recognition for Malaysian vehicles using stroke analysis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Bakar, Shahrazie Zainal (2009) Scalp current density mapping during motor task with passive viewing of visual stimulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainal, Sheikh Muhammad Hafiz Fahami (2009) Ball and beam control system design using microcontroller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Yaseen, Yasir Amzad Ali (2009) Developing PLC based gantry robot using positioning servo drive with profibus – dp communication protocol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Wahid, Siti Aisyah (2009) Impacts of microturbine on a distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Thanakodi, Suresh (2009) Modeling and simulation of grid connected photovoltaic system using Matlab / Simulink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Chee Wei (2009) Modeling and control of an engine fuel injection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Ewe Cheong (2009) Development of march test generator using C++. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Yong Meng (2009) Development of educational graphical interfaces for radiation and propagation of rectangular patch antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tajdari, Teimour (2009) GPU implementation using CUDA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tuan Ahmad, Tuan Noorunnazifah (2009) Awareness on the implementation of life cycle assessment in light industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat @ Mohamed, Usamah (2009) Intelligent fault detection and classification for a power transmission line using power system stabilizer signals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kouhdaragh, Vahid (2009) Low noise amplifier design for radio telescope system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Mohd Nowalid, Wan Umikalthum (2009) Small signal dynamic study of a microgrid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Kam Yee (2009) Design of tunable differential transconductance-capacitance low pass filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ayub, Zatul Akmar (2009) Load flow analysis uncertainty treatment via fuzzy arithmetic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rashid, Zarina (2009) Identification of test rig for a quarter car active suspension systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Noorden, Zulkarnain (2009) Return voltage measurements to investigate the degradation of zinc oxide varistor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yasmin, Abdul Wahab (2009) Ultrasonic tomography for multiphase flow regime identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azmi, Azralmukmin (2009) The effect of multiple lightning impulse on the electrical characteristics of transient voltage suppression diode as low voltage lightning protective device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Samir, Bennane (2009) Energy efficient cluster-based protocol for wireless sensor networks (WSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sasi Mohammed, Daw Saleh (2009) Travelling wave method for transmission system fault location. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

M. Lamin Gabasa, Hagag (2009) LQR controller tuning by using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasim, Melani (2009) Effect of various types of traffic signal on red light running. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Mohd. Faizal (2009) Physical and combustion characteristics of densified palm biomass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sha’Ari, Mohd. Farhan (2009) Network-on-chip network adapter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Tumari, Mohd. Zaidi (2009) Development of a two-link flexible manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jusoh, Muhammad Noor Hazwan (2009) Utilization of optical satellite data for measuring carbon dioxide at Felda Maokil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Othman, Nor Liawati (2009) Inventory management and control at an in-flight catering company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adnan, Norliyana (2009) Effects of landuse changes to water quality and green mussels (Perna viridis) due to development along Danga-Pendas coastal area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Cheow Hong (2009) Design improvement of existing product using life cycle assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saeed Ahmed, Radwan Ahmed (2009) Performance and evaluation of graphite when machining hardened steel ASSAB 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Soon Lam (2009) Design improvement using life cycle costing methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Yun Hong (2009) Metal filling characteristics of aluminium lost foam casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farshchi, Iman (2009) Soil-root interaction and effect on slope stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Olwane, Mahmood M. (2009) Adaptive input shaping for control of a flexible manipulator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ramli, Mimi Faisyalini (2009) Microstrip antenna array for satellite communication operating at 12GHZ. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Ariff, Mohd. Aifaa (2009) The impact of fault current limiter in power system performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamarol Zaki, Mohd. Nasir (2009) Splice system in extending the precast prestressed concrete beam span. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rusli, Mohd. Shahrizal (2009) Wireless sensor network for smart power management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Rashid, Muhammad Ikram (2009) Efficiency analysis of PV inverter – adjustable speed drive system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Razak, Noorazlinda (2009) Application of geographic information system in water quality study on a road construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zambri, Nor Aira (2009) Dynamic modeling of a stand-alone pem fuel cell connected to adjustable speed drive. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Noramalina (2009) FPGA implementation on MRI brain classification using support vector machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Norhasmi (2009) Recovery and recycling processes of scheduled waste in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabri, Shaikhah (2009) Impact of water quality on seagrass meadow at Tanjung Kupang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Matlan, Siti Jahara (2009) Backanalysis of rainfall induced landslide in Sabah by Perisi Model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Balogun, Abdul-Lateef (2009) Three dimensional visualization of water pipelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Gan, Long Fatt (2009) Forex forecasting by using NGARCH model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Wahab, Jufiza (2009) Intraguild predation model with disease. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lai, Sin Yee (2009) Heritage trail planning in Melaka Historic City : its potential objectives, themes and target users. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Chee Nian (2009) Application of Arima and Garch models in forecasting crude oil prices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lim, Yee Chea (2009) Implementation of simulated annealing in unit selection for Malay text-to-speech system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed Bahram, Maher Bahram (2009) Dual band aperture coupled microstrip patch antenna using different aperture shape for wireless LAN application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Nur Liyana (2009) Enhancement of Universiti Teknologi Malaysia image map using Garmin handheld receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Zolkipli, Nurul Farhana (2009) Forecasting domestic tourism : application to Johor tourism data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainordin, Raihana (2009) Count data analysis using poisson regression and handling of overdispersion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Othman, Siti Fairus (2009) The legal status of construction work programme in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shojaei, Ali Asghar (2009) Development of generator aggregation technique for power system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Turtugulov, Amir (2009) Passengers‘ awareness and perceptions on safety and security measures and procedures in Airport Terminal Building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kiprawi, Mohamad Fairuz (2009) Defence of abatement for defective works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nor Hanafi, Nor Afiah (2009) The application of hazard function in the case study of the use of an IUD for woman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Hazir, Nursakinah (2009) Statistical examination of common characteristics for disguised handwriting amongst Malaysian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ali Bakra, Tareg Ramadan (2009) Choice and familiarity of using corridor and spill over space in urban centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Voon, Chui Khim (2009) Analytic hierarchy process in academic staff selection at Faculty of Science in University Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yerimbekkyzy, Dinara (2009) Korgalzhyn state nature reserve: management process and its problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alejaily, Ejaily Milad Ahmed (2009) Boundary integral equation for the Neumann problem in bounded multiply connected region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nassir Ibrahim Musa, Salih (2009) The best practice of electronic business for books sale in IUA, Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Zainal Abidin, Nurul Auni (2009) Phase equilibrium and partition coefficient of selected pesticides and nitrophenols in double and triple-phase liquid-phase microextraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullasim, Nazreen (2009) Implementing throwaway prototyping model in web development life cycle (WDLC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Lasimon, Norlia Mazlin (2009) Penggunaan konsep margin keuntungan secara ruang dalam menentukan kelebihan lokasi bagi kilang perusahaan roti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Alqahtani, Saeed Ibrahim S. (2009) A prototype for filesystem integrity checker in user-space mood. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Foozy, Cik Feresa (2009) Best-location technique for mammogram authentication by LSB based watermarking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Muhammad, Faiz Bashir (2009) Google web toolkit (GWT) and JAVA EE - the synergy for modern web application development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Isa, Hairul Azni (2009) The practical analysis towards developing a guideline for the Xbox 360 forensic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohamed, Harun (2009) E-vendor evaluation and selection system for Felcra Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Komarudin, Komarudin (2009) An improved ant system algorithm for unequal area facility layout problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saleh, Mohammed Abbas Alameen (2009) Network digital evidences centralization by using honeynet architecture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohamad Zain, Nurzaini (2009) Fuzzy based threat analysis in total hospital information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Chai, Jing Hui (2009) Feature reduction for neural network in determining the Bloom’s cognitive level of question items. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Khoo, Song Ching (2009) Usability testing of industrial training system (ITS-UTM) phase i for modules used by the students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Al-Ali, Mohammed H. M. (2009) Incorporating user's trust in building e-recruitment system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Isa, Mohd. Adham (2009) Enhancement of rapid object process for embedded system (ROPES) to support pattern oriented development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Othman, Noor Khairunnisa (2009) Heuristic design for e-government portal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abd. Aziz, Nursyarafina (2009) A service quality assessment instrument for the bioinformatics information sources. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ghazali, Nurulhuda (2009) Comparative study of feature selection method of microarray data for gene classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Palaniappan, P. Siva Shamala (2009) A model for validation and verification of disk imaging in computer forensic investigation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohammed Elhassan A. Elzubair, Rofaida (2009) Aiding decision making in public health domain using web GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Teh, Hui Pheng (2009) Development of information system for government chinese primary school (case study : SJK(C) Convent Datuk Keramat). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mazlan, Umi Hanim (2009) Classification of breast cancer microarray data using radial basis function network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdul Basitt, Umi Nadia (2009) Web portal for scientific computing library. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Wan Ismail, Wan Saiful ’Azzam (2009) Comparative study of image outlier detection using hexagonal lattice and rectangular lattice based on self-organizing map. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Qusay Yahya, Yahya (2009) Strategies for enhancing e-learning implementation in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Yeap, Chun Nyen (2009) Reasoning of the student’s performance based on adaptive neuro-fuzzy inference system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Zulkifli, Zalikha (2009) Plant leaf identification using moment invariants & general regression neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ahmed Khalf, Ahmed A. (2009) Development of live learning system using multi integrated approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Md. Som, Mohamad (2009) Internet media management system for university campus interactive tv (UTHM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Sanusi, Mohd. Hamim (2009) Research portfolio system for Research Management and Innovation Centre, Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Othman, Nur Hidayati (2009) Synthesis, characterization and optimization of sulfonated polyether ether ketone composite membrane for direct methanol fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Bilmas, Siti Noormaya (2009) Development of an electronic arabic dictionary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Beeran Kutty, Suhaili (2009) Comparative study between data warehouse and mediation approaches in information integration of heterogeneous biological data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Hassan Khalel, Tarik I. (2009) Data transmission using juxtapose project with wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khoo, Chun Yong (2009) Ultrasonic machining, lapping and polishing of neodymium doped yttrium aluminum garnet laser crystal rod. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainal Abidin, Nurul Auni (2009) Phase equilibrium and partition coefficient of selected pesticides and nitrophenols in double and triple-phase liquid-phase microextraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Akil, Mohd. Asmu’I (2009) Design and construction of an interrogation unit for fiber Bragg grating sensor system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pae, Norhayati (2009) Rotary discs reactor for enhanced production of microbial cellulose. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Mohamad, Asiah (2009) Application of thiazole and triazole compounds in carbon steel corrosion protection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Ariff, Noratiqah (2009) Regional frequency analysis of maximum daily rainfalls using TL-Moment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bilal Ali, Mohamad (2009) Sistem penghasilan bahan pembelajaran peribadi berasaskan kecerdasan pelbagai dalam persekitaran web. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Evy Yusriani, Evy Yusriani (2009) Configuring suitable landfill with GIS-network analyst case study municipal of Batam - Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Elita Amrina, Elita Amrina (2009) Manufacturing performance measurement tool for small and medium-sized enterprises. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musa, Ismail (2009) Static and dynamic analysis of a ladder frame truck chassis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Samsuddin, Norzilawaty (2009) Application of quality function deployment in multimedia integrated telephone kiosk design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Makmor, Nazrul Fariq (2009) Potential energy and carbon dioxide reduction in commercial sector in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Faidi, Mohd. Azahari (2009) Pengeluaran primer bersih kawasan hutan hujan tropika menggunakan data Aster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abd. Malek, Muhammad Nor Fazli (2009) Synthesis, characterization and evaluation of Pamam Dendrimer-Gold complex as an anion recognition material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sani, Nor Suriani (2009) Synthesis and characterization of alcohol-free tyrosinase encapsulated silica aerogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Yew Choo (2009) Synthesis, characterization and photocatalytic studies of CdS incorporated titanosilicate for hydrogen generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammad Ghomeshi, Mohammad Ghomeshi (2009) Family participation in house design of Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nordin, Soeb (2009) Height modernization using fitted geoid models and myrtknet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Bolong, Nurmin (2009) Charged surface modifying macromolecules hollow fiber nanofiltration membrane for the removal of bisphenol - a in domestic wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Maznah (2009) Application of a hydrodynamic water quality model in Sungai Johor estuary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musthofa, Malik (2009) N-pentane originated protonic acid sites over zinc promoted HZSM-5. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ujir, Mohd. Haffis (2009) Pulse combustion studies of propane and natural gas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Birzhanova, Idina (2009) Halal products oriented electronic commerce website prototype development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Muniandy, Thavamalar (2009) Reusing of treated waste water in concrete production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap Lawrence, Sie Kiong (2009) Breaches of contract in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Chia Kuang (2009) Suspension of works as remedy for non-payment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sodangi, Mahmoud (2009) Legal effect of breach of warranty in construction insurance in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Nasyira (2009) The application of 'pay when paid' provisions in construction sub-contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mardiyono, Mardiyono (2009) Adaptive architecture for radio frequency identification middleware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Bong Justin, Chunn Tat (2009) Factors affecting in the preparation of construction work schedule. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahromi, Bahman Esfandiar (2009) Design of a tsunami barrier to The North of Penang Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamza, Hasmida (2009) Water quality trend at the upper part of johor river in relation to rainfall and runoff pattern. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Khairil Afendy (2009) Penilaian kesesuaian kaedah fotogrametri digital jarak dekat untuk pengukuran objek tiga dimensi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Razak, Mohd. Shahrizal (2009) Beach response due to the pressure equalization modules (PEM) system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawahwi, Mohd. Zaini (2009) Degradation of reactive red 195 by selected bacteria from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mokhtar Kamal, Nurul Hana (2009) Comparison of water quality and habitat assessment between wetland and river. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Peng Pheng (2009) Seismic performance analysis of Kuala Lumpur air traffic control tower by friction damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sundara, Parameswary (2009) Correlation between uniaxial compressive strength and point-load index strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ahmad, Saffuan (2009) Non linear seismic performance of smart tunnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daneshmand, Saman (2009) Improving soil properties to prevent surficial slope failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baskara, Sudesh Nair (2009) Investigations of factors affecting pendulum test value on asphaltic concrete surfaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teo, Mei Choo (2009) Attributes of smart bridge monitoring technologies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tey, Kim Hai (2009) Factors affecting the contractor’s mark-up size decision in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Abbas, Zaid F. (2009) Structural behavior of prestressed pretensioned concrete composite section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Keyvanfar, Ali (2009) A framework for cost assessment of qms for building contractors based on biological immune system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Fadrul Hafiz (2009) Seismic performance of water tank tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Halim, Herni (2009) Water quality and fish habitat assessment of rivers in Johor (Sungai Dengar, Sungai Tui, and Sungai Mengkibol). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kong, Xi Haw (2009) Barriers in the implementation of industrialised building system in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Wei Han (2009) Management competencies for preventing and reducing stress at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alomar, Saif Laith Khalid (2009) Comparison between grillage model and finite element model for analyzing bridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Elayesh, Salem (2009) Performance of laterite aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wai, Soon Han (2009) Vendor managed inventory in contruction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omidinia, Siavash (2009) Development of ICT strategic plan for smart school in Iran (case study : Ministry of Education in Iran). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohamed Rusli, Nurfarhain (2009) Watering of landscape plants using wastewater treated with terminalia catappa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Johari, Zaharah (2009) Diffusion coefficient to mobility ratio in low-dimensional nanostructures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chew, Li Ling (2009) Process improvement using six sigma methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Wan Othman, Che Wan Mohd. Noor (2009) Manoeuvring prediction of offshore supply vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngu, Andrew Leong Chung (2009) Power quality study of a network of adjustable speed drives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharudin, Bakhtiar Ariff (2009) Further validations of the hydrodynamic force coefficients for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Hamid, Shamsul Effendy (2009) Fuzzy expert system package for the assessment of marine technology training programs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Muhammad Nasuha (2009) Initial investigation of ship resistance at river mouth area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Poh Lay (2009) Model for throughput performance measures and monitoring system in semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Asmael, Mohammed Bsher (2009) Lost foam casting of LM6-Al-Si cast alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Suffian, Muhammad Dhiauddin (2009) Defect prediction model for testing phase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Annamalai Gurunathan, Balamurugan (2009) Energy absorption of impact damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Samad, Faisal Ikram (2009) Performance of catenary mooring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafari, Arash (2009) Optimization of a circular microchannel heat sink using entropy generation minimization method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Azman (2009) Small boat identification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chee, Ailing (2009) Facility layout improvement using systematic layout planning (SLP) and arena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memary, Reza (2009) Development of a model for integration of assembly and disassembly in life cycle management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mukhtar, Zaimi Zainal (2009) A comparison of fatigue levels among Malaysian seafarers of different maritime sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Malik, Asmawi (2009) Legal framework governing the carriage of liquified natural gas (LNG) within coastal water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awang Sh'ri, Dayangku Noorfazidah (2009) Effect of surface pretreatments on the deposition of polycrystalline diamond on silicon nitride substrates using hot filament chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramanathan, Geeva Raj (2009) Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sharmugham, Thinesh Kumar (2009) Refined numerical simulation of the mechanical behaviour of hollow sphere structures. Masters thesis, Universiti Teknologi Malaysia.

Ali, Mohamed Assnousi (2009) Corrosion behaviour of ductile cast iron. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Poobalan, Prakash (2009) Equipment and process performance improvement using automated monitoring system. Masters thesis, Universiti Teknologi Malaysia.

Koloor Saeid Rahimian, Seyed (2009) Damage mechanics of composite laminates subjected to cyclic flexual load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koh, Ching Hao (2009) An architecture for client-server based control chart patterns recognition system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustaffa Kamal, Iwan Zamil (2009) Further development of ship added resistances in head waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bero, Anuar (2009) Performance prediction for high speed craft. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sahray, Kholim (2009) Quantifying depreciation in plant and machinery valuation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Rahim, Nor Hayati (2009) Persepsi pemaju terhadap penggunaan IBS (Industrialised Building System). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kassim, Mostafa M. Nagi (2009) Design of fork and slotted circular ultra wide band (UWB) antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhamed, Nor Azizan (2009) Fair and reasonable assessment in granting extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salleh, Nor Hayati (2009) Kesanggupan membayar [willingness to pay] oleh pengunjung terhadap Hutan Bandar di Daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kurniawan, Rahmat (2009) The relationship between urban shade and people’s activities in outdoor spaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jaruman, Shudermawan (2009) Effects of artificial acid rain on water tree in crosslinked polyethylene insulation material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Jui Ang (2009) Genetic algorithm application in optimizing transmission parameters on adaptive mechanism of cognitive radio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yunazar, Ferdian (2009) Modeling and performance analysis of the OFDM scheme for radio over fiber system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sinnathamby, Rengiah (2009) Prediction of best coverage area for outdoor wireless propagation at 2.4 GHZ using Walfisch-Ikegami Simulation Model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Roslee, Ahmad Azmeer (2009) Productivity measurement in Malaysia shipbuilding industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yahaya, Abubakar (2009) Public awareness and willingness to recycle spent nicklecadmium (Ni-Cd) rechargeable batteries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jasmani, Noor Zarith Iffa (2009) Allocation of security cost in a pure pool-based electricity market desgin on load contribution towards security problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

A. Rahman, Nurul Izuddin (2009) Quality improvement of shunt active power filter with dual parallel topology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zamri, Zamsalwani (2009) The effect of high tides on Sungai Damansara using Infowork RS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kitikan, Andarian (2009) Student Management System (SMS) for kolej komuniti in Mesiniaga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yee, Chan Pheng (2009) Threat analysis using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Assylkhanov, Zhandos (2009) Solar water heating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar Al-Amodi, Ahmed (2009) Authentication study and implementation using IPSEC and IEEE 802.1X technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Saw, Chun Lin (2009) Squeal suppression approaches of a disc brake assembly. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sharif, Haniza (2009) Users' perception of the information security policy at Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Rahim, Fiza (2009) Comprehensive analysis on the influences of computer ethics on information security. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abu Hassan, Nurfazlin (2009) Study of interfacial reaction during reflow soldering of Sn-Ag-Cu lead-free solders on bare coppper and immersion silver surface finishes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasim, Nurdatillah (2009) Organizational measurement of defect density. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Arbain @ Sulaiman, Norakmar (2009) Software testing process for shared banking services (SBS) system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Haratian, Mohammad Hossein (2009) An architectural design for a hybrid intrusion detection system for database. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Alghamdi, Hanan Musafer H. (2009) Requirements analysis for SBS system and study review process iteration during requirements phase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Nor, Hairul Anuar (2009) Improving antispam techniques by embracing pattern-based filtering. Masters thesis, Universiti Teknologi Malaysia.

Saleh, Basam N. (2009) Prototype development for embedding large amount of information using secure LSB and neural based steganography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed Ali, Elfadil Sabeil (2009) The encryption - decryption of the column level for a commercial DBMS with supporting user interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Bulatov, Adilbek (2009) Digitizing microfilms for document management and filing archival system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Syzdykbayeva, Dana (2009) Analytical study on adoption of green computing by Malaysian organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ozkan, Necmettin (2009) Investigation of mashups as a possible tool for managers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Abdul Mouti Molki, Omar (2009) Enhancement of AES algorithm for IAX protocol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Zaharullil, Haniz Zuraiha (2009) Enforcement and challenging of arbitration award. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Zahid, Mazlan (2009) Operating costs differentiation among the haulage companies : in the case of Southern Region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Morshidi, Mohammad (2009) Reliability of marine transportation in Miri oil and gas activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Daud, Mohd. Fadzali (2009) Midnight taxi charges abuse at LCC Terminal, Sepang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Baniani, Behdad (2009) Implementation of a MIS tool based on open XML. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sharifi, Mahdi (2009) Enabling security for service discovery in pervasive computing environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammadi, Hamed Taherdust (2009) Development of an adoption model to assess smart card technology acceptance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Namayander, Meysam (2009) Development of computer ethical framework for information security (educational context). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kalantari, Alaeddin (2009) Designing a logical security framework for enterprise service oriented architecture (ESOA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibraheem, Layth Abdulmuttaleb (2009) Pentaquote (bringing new user experience in financial solutions). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Md. Sairan, Fadzlin (2009) The development of decision support system for the selection of wastewater treatment process and plant design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar, Roslina (2009) The prediction of time-dependent deformation of normal strength concrete in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Razak, Azri Rasyidi (2009) Removal of endocrine disrupting chemicals using low pressure reverse osmosis membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raja Abdullah, Raja Nor Wafiah (2009) Penambahbaikan pengurusan penyemakan semula senarai nilaian pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Sukarsan, Sukarsan (2009) Magnetohydrodynamic accelerator with equilibrium plasma. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Mahfoudh Muherei, Mazen (2009) Adsorption of surfactants to shale and sandstone and its effect on oily drill cuttings decontamination. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Hassan, Wan Haslina (2009) An agent - based architecture for mobility management in internet protocol networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khatib, Anwar (2009) Bearing capacity of granular soil overlying soft clay reinforced with bamboo - geotextile composite at the interface. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan , Cher Siang (2009) Behaviour of pin partial strenght beam-to-column connections with double channel cold-formed steel sections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hu , Laey Nee (2009) Boundary integral equations approach for numerical conformal mapping of multiply connected regions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd Ali, Nor Muhainiah (2009) Capability and homological functors of infinite two - generator groups of nilpotency class two. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ratman, Iwan (2009) The characterization and removal of foam promoting impurities from blended methyldiethanolamine - piperazine solution using membrane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Bolong, Nurmin (2009) Charged surface modifying macromolecules hollow fiber nanofiltration membrane for the removal of bisphenol - a in domestic wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdalla, Akram Gasmelseed (2009) Computation model of humanhead for wireless radiation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Kamar, Haslinda (2009) Computerised simulation of automotive air conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad, Nor Asiah (2009) Condition monitoring of biodegradable oil-filled transformers using DGA, PD, and PDC measurement techniques Construction and characterization of a Q - Switched Nd : YAG laser system. PhD thesis, The University of New South Wales.

Tamuri, Abd. Rahman (2009) Construction and characterization of a Q - Switched Nd : YAG laser system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan , Tian Swee (2009) Corpus - based Malay text to speech synthesis system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Wahab, Norhaliza (2009) Data - driven identification and control design for wastewater system. PhD thesis, University Strathclyde.

Chuprat, Suriayati (2009) The deadline - based scheduling of divisible real - time workloads on multiprocessor platforms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Aboobaider, Burhanuddin (2009) Decision support model in failure - based computerized manitenance management system for small and medium industries. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ler , Chun Lee (2009) Design of complementary metal -oxide - semiconductor radio frequency modules with active inductor using standard complementary metal -oxide- semiconductor process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamzah, Rohana (2009) Development and evalution of the holistic self development modules : a study among arts design students. PhD thesis, Universiti Teknologi Mara.

Zulkifli, Nadiatulhuda (2009) Dispersion-optimised resource allocation in all-optical networks with heterogeneous optical services. PhD thesis, University of Essex.

Al Maktary, Ammar Yassin Ghalib (2009) The effects of country - of - origin on yemeni consumers' attitudes towards asian products. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Safaai, Siti Sarah (2009) Electrical characteristics of a direct current. PhD thesis, Universiti Malaya, Fakulti Fizik.

Azit, Abu Hanifah (2009) Engineering and economic flasibility of gas - fired grid - connected cogeneration systems in peninsular malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kanniah, Kasturi Devi (2009) Environmental controls on the spatial and temporal variability of savanna productivity in the northern territory, Australlia. PhD thesis, Monash University.

Abdullah Almhab, Ayoub Ahmed (2009) Estimation of regional evapotranspiration using remote sensing data in arid areas. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abd. Samad @ Mahmood, Md. Fahmi (2009) Evolutionary computation for model structure selection in system identification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Md. Said @ Mohd. Zaid (2009) Faktor luaran dan dalaman yang mempengaruhi pembangunan tanah di Pulau Duyong, Kuala Terengganu. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamad Yatim, Yahya (2009) Fire safety models for high-rise residential buildings in Malaysia. PhD thesis, Heriot-Watt University.

Ullah Sheikh, Usman (2009) A framework for three - dimensional model - based camera positioning invariant vehicle classification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Jo Lynn (2009) High frequency communication signal analysis for signal classification using time frequency analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed, Iqbal (2009) High performance ultrafiltration polyethersulfone membrane using microwave assisted technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Lau Alvin , Meng Shin (2009) High spatial resolution and hyperspctral remote sensing for mapping vegetation species in tropical rainforest. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Tuan Abdullah, Tuan Amran (2009) Hydrogen production from catalytic ethanol reforming in supercritical water. PhD thesis, University of Waterloo.

A. Mustafa, Balsam (2009) The impact of use case format on the understanding of system requirements by novice and experienced users. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abu Naim, Hamimah (2009) Impak sekitaran sekolah,motivasi dan strategi pembelajaran terhadappencapaian akademik dalam mata pelajaran sains. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd Khalid, Saifulnizam (2009) Improved real and reactive power transmission usage allocation methods for deregulated power systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Pei , Ling Leow (2009) In-column electrochemical detection for liquid chromatography. PhD thesis, Imperial College London.

Elbasheer, Mohammed Kabashi (2009) Influence of autofrettage on pressure limits and fatigue life ofpressurized thick - walled cylinders. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Priyandoko, Gigih (2009) Intelligent active force control of a vehicle suspension system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sheikh Abdullah, Siti Norul Huda (2009) Intelligent license plate recognition system based on multi feature extractor and support vector machine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ariyono, Sugeng (2009) Intellingent electromechanical continuously variable transmission ratio controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haron, Haryani (2009) An interpretive tacit knowledge exploration of Malaysian academicians. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ismail, Syuhaida (2009) Key performance indicators for private finance initiative in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sihes, Ahmad Johari (2009) Konsepsi pengajaran pensyarah dan kaitannya dengan pendekatan pembelajara n pelajar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Rameli, Alias (2009) Land use planning system and housing development process in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeow Roland, Theng Nam (2009) Learning organization elements as determinants of organizational performance of non-profit organization in Singapore. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Harun, Fauzan Khairi (2009) Mimicking the human olfactory system : a portable e-Mucosa. PhD thesis, The University of Warwick.

Husein, Abdul Chalid (2009) Model for mixed sea and inland port. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Misnan, Mohd. Saidin (2009) Model membangunkan budaya keselamatan dalam firma pembinaan di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Sipan, Ibrahim @ Atan (2009) Model penilaian massa berasaskan analisis spatial bagi tujuan keadilan dan keseragaman taksiran harta. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Zain, Nor Azimah (2009) Modification of PVA - algina teimmobilization matrix to immobilize invertase. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Darmalis, Fitri Hayati (2009) Modified manganase oxide octahedral molecular sieves for oxidation and consecutive oxidation - acid reactions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ab. Rahim, Nor Zairah (2009) Mutiple perspectives of open source software appropriation in Malaysian public sector. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad, Abdul Rahim (2009) On-line handwriting recognition using support vector machines and hidden markov models approaches. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Zain, Ahmad Rifqi (2009) One - dimensional photonic crystal/photonic wire cavities based on silicon - on - insulator (SOL). PhD thesis, University of Glasgow.

Phang Abdullah, Fatin Aliah (2009) The patterns of physics problem-solving from the perspective of metacognition. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ali Khan, Mohd. Noor Azli (2009) Pelaporan kewangan menerusi internet : indeks, tahap pelaporan dan faktor penentunya. PhD thesis, Universiti Utara Malaysia.

Talib, Rohaya (2009) Pembinaan dan pengesahan instrumen ujian literasi pentaksiran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Utaberta, Nangkula (2009) Pemikiran senibina Islam moden di nusantara pada abad ke -20. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Mahdzir, Akbariah (2009) Penerokaan ciri-ciri psikometrik instrumen pentaksiran pemikiran kraitis Malaysia (IPPKM) dan model pemikiran kritis Malaysia. PhD thesis, Universiti Kebangsaan Malaysia, Faculty of Education.

Lau, Woei Jye (2009) Preparation, characterization and performance evaluation of negatively charged nanofiltration membrane for dyeing wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Emrizal, Emrizal (2009) Phytochemicals and biological activities of selected piper species. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan , Pui Lai (2009) Prediction of time - dependent deformation of high strength concrete in tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Manap, Yazid (2009) Properties of zinc oxide thin films gas sensor for detection of carbon monoxide. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Mohd., Wan Maseri (2009) Relationship between knowledge management and information technology infrastruktur with project performance in construction consulting companies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Anif, Bahrul (2009) Sifat-sifat konkrit dengan jermang relau arka elektrik. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Hasan, Ammar Abdo (2009) Similarity - based virtual screening using bayesian inference network for searching chemical database. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Ayob, Shahrin (2009) Singler input fuzzy proportional integral controller for inverter regulation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohmad Zakwan @Zakuan, Norhayati (2009) Structural analysis of total quality management, ISO/TS16949 and organizational performance in Malaysian and Thailand automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shek , Poi Ngian (2009) Structural behaviour of built - up steel sections using partial strength connection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakar, Mohd. Bakri (2009) Synthetic studies for photo-triggered release of biioconjugate porphyrin photosensitisers in photodynamic therapy. PhD thesis, University of Dublin.

Hau, Yuan Wen (2009) Systems-based design framework for an embedded system implemented as system -on-chip. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alajmi, Naser K. A. K. (2009) A theoretical and computational two level finite - state approach for arabic derived broken noun CV - metadata morphology. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hashim, Suhairul (2009) The thermoluminescence response of doped silicon dioxide optical fibres to ionizing radiation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muhammad Douglas, Umbugala (2009) Timeless practice framework as facilities management outsourcing performance evaluation model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jamaluddin, Mohd. Haizal (2009) Traitement du signal et telecommunications. PhD thesis, Universiti de Rennes.

Dodo, Joseph Danasabe (2009) Tropospheric delay modelling in a local global positioning system network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdullah, Ilyani (2009) Two-dimensional mathematical models for micropolar blood flow through an arterial stenosis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Ismail, Wan Hashimah (2009) User's perception on the heritage value of the old shophouses the historic city of Malacca. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saad, Ismail (2009) Vertical channel structure and ballistic carrier transport of nanoscale metal oxide semiconductor field effect transistor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Zeki, Akram (2009) Watermarking techniques using intermediate significant bit. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammed Napiah, Zul Atfyi Fauzan (2009) Design and characterization of nanoscale metal -oxide- semiconductor field effect transistor incorporating dielectric pocket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bahsan, Rosnadiah (2009) Diffusive thermal instability in premixed flame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Zain, Rasif (2009) Dual modality tomography system using optical nd capacititve sensors for solid gas flow measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Hamid, Shamsul Effendy (2009) Fuzzy expert system package for the assessment of marine technology training programs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Alejaily, Ejaily Milad (2009) A boundary integral equation for the neumann problem in bounded multiply connected region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ayoob Al-Zaben, Amjed M. Ameen (2009) A new design of hybrid polymer-silica multimode interference (MMI) based wavelength demultiplexer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Basar, Mohd. Farriz (2009) A new source of renewable energy from lightning return stroke: a small scale system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan Madani, Badr Eldeen (2009) A web-based to re-establish contact between missing searated families during conflicts and natural disaster in Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed Bisher, Zakaryah Omar (2009) Accuracy assessment of areial triangulation based on a strip and a block of aerial photograph. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Sujatmoko, Agus (2009) An accurate Constrained Interpolated Profile or solving BGK Boltzmann equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Abu Bakar (2009) Achieving sustainable construction in electrified double track project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eldeen Mustafa Rateb, Ahmed Elsayed Mohy (2009) Adaptive data distribution technique for enhancing ultra wideband link performance in a detect and avoid environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Imtihan, Muhammad Rofi (2009) An adaptive maintenance process model for open source software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Forkan, Fadni (2009) Algoritma rangkaian Kohonen - Swarm bagi penjanaan permukaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Majid, Mohd. Firdaus (2009) Analysis of bullet holes in glass and vechicle metal target for shooting incidence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nasution, Aulia Muflin (2009) Analysis of heritage conservation management using geographic information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development .

Md Rahim, Siti Sarah (2009) Annual performance appraisal system based on research university criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kurniawan, Tri Basuki (2009) Ant colony optimization and its application in DNA sequence design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saealal, Muhammad Salihin (2009) Ant colony optimization for CNC route optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Maasriah (2009) Aplikasi sistem maklumat geografi (GIS) dalam analisis jenayah di akwasan Ampang Jaya : kajian kes kawasan pihak berkuasa tempatan Ampang Jaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Christiana, Eyetan (2009) Applicability of gis database to customary land development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Hashim, Zaredah (2009) Application of combined heat and power in Malaysia industrial sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Toh, Paik See (2009) Application of crime prevention through environment design (CPTED) concept in residential area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Shakir, Noor Adila Aluwi (2009) Application of design of experiment technique in the single step pretreatment process for diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Siti Haida (2009) Application of ergonomics in reducing product quality problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seyedjalali, Jayad Taghinia (2009) The application of fluent 3D to simulate flow hydrodynamics around vertical cylinders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Odli, Zaity Syazwani (2009) Application of geographic information system (GIS) in air quality monitoring of a road construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raharjo, Yanuardi (2009) Application of hollow fiber membrane liquid phase microextraction to the analysis of organophosphorus pesticides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Abd. Rahman, Wan Latif (2009) Application of lean manufacturing concept in service sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Meor Adam, Arfah Hanum (2009) Architect's continuing duty to review design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, Swee Quo (2009) Artificial neural network learning enhancement using artificial fish swarm algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Radu, Jos (2009) Assesing the level of services for containerized cargo operations at Miri Port authority. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Eslami Afrooz, Aida (2009) Assessing wayfinding of users in unfamiliar large scale urban places : case study Malacca heritage zone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

A. Abushnaf, Ahmed Mohamed (2009) Assessment of aerial triangulation using different digital photogrammetric software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Fu, Yek Pieng (2009) Assessment of buyer's preference of high-cost residential properties using conjoint analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Wan Ramli, Wan Nur Aliffa (2009) Assessment of parking demand impact on adjoining roadway network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harun, Muhammad Firdaus (2009) Automated model-driven testing of service-oriented software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ninggal, Mohd. Izuan Hafez (2009) Automatic speaker identification using auditory - vocal tract area ratio feature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Azali, Mohd. Syahril (2009) Backeye sensor : for reversing vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharudin, Muhammad Ariff (2009) A basic structure in implementing ant colony optimization on telosb motes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Manap, Norliana (2009) The behaviour of sleeve connection with spiral reinforcement and additional longitudinal bar under direct tensile load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajabi, Hanieh (2009) Behavioural approach to rapid malcode signatures generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Salih Nassir Ibrahim (2009) The best practice of electronic business for books sale in IUA, Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad, Norlaily (2009) Biosorption of chromium (VI) by chitosan immobilized. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Sakri, Norhaslina (2009) Blended chitosan and poly (vinyl alcohol) membranes for the prevaporation of methanol and methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Zahidi, Mardiyah (2009) Buildability in bridge construction : case study of Sungai Johor cable-stayed bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yu, Ling Zi (2009) Building cleaning service criteria for service level agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohammadi, Farahbod (2009) Building maintenance in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Foo Wei (2009) Cable stayed bridge construction : case study of Sungai Johor cable stayed bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Salleh, Farrahshaida (2009) Cad and document of inspection jig for an automotive part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Kin Wei (2009) A case study in the implementation of data envelopment analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abba, Ahmad Halilu (2009) Catalytic ozonation of pharmaceuticals using activated carbon-metal loaded catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Mosavat, Masoumeh (2009) Change order causes and control in the oil and gas construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salleh Hudin, Noraihan (2009) The characteristization of titanium -doped sapphire fluorescene spectrum pumped by DPSS laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Wan Azlina (2009) Claim due to discrepancies in contract documents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Shuh Jiuan (2009) Classification of human motion activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Saaid, Muhammad Faiz (2009) Clustering techniques for DNA computing readout method based on real-time polymerase chain reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Elshafie, Hashim Eltahir (2009) Co-existance between cognitive wimax and tv band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mokayef, Mastaneh (2009) Coexistence and sharing between fixed satellite service and broadband. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Ibrahim, Nor Iza Iffazun (2009) Comparative analysis of optimised static and multi-timed fixed traffic signal timings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jama, Siti Ramizah (2009) A comparative study between arima and exponential smoothing models in tourist arrival forecasting at Tanjung Puteri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainudin, Muhammad Noorazlan Shah (2009) Comparative study of classification tissue in medical imaging using radial basis function (RBF) and backpropagation (BP) network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Safri, Dayang Sabriah (2009) A comparative study of construction project delays in Johor and Sabah region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haikhal, T. Niki (2009) Comparison between marshall strength properties and rutting potential. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd Munir, Nur Hafizah (2009) Comparison of different automatic text summarization systems using standard performance evaluations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Irhoumah, Jamal Mohamed Salih (2009) Comparison of digital photogrammetric software in the production of digital orthophoto and digital map. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mukhtar, Zaimi Zainal (2009) A comparison of fatigue levels among Malaysian seafarers of different maritime sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Ashmila, Fathi (2009) Compression characteristics stabilized cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Satar, Hairil Azli (2009) Condition monitoring of power transformer performance using dissolved gas analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Tian Hwee (2009) Conditioning properties of polynomials in a generalized basis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed, Osama Mohamed Abdelsalam (2009) Configuration of street corners and its relationship with urban resident' behaviour : a case study of Melaka city. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nateghi, Fatemeh (2009) Construction site noise control : a case study for UTM's project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Eng Guan (2009) Construction waste generated in conventional method of housing construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Chiaw Guan (2009) Contractor's right to claim for extra works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad @ Mohd. Yusoff, Faisul Arif (2009) Control of an autonomous khepera mobile robot based on the ordinal structure model of fuzzy reasoning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Farag Badyah, Abdullah Ahmed (2009) Control of induction motor using vector control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Zaki, Nor Azlin (2009) Cost of security in power system transmission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mazlan, Erita Mazwin (2009) A critical investigation on the incorporation of IBS knowledge into the Polytechnic academic curriculum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noordin, Aminurrashid (2009) Cuff-less blood pressure meter system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nicholas , Jeremy Francis (2009) Customer relationship management system for Perpustakaan Sultanah Zanariah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd Alwi, Noraizian (2009) Cyanide removal by a local isolated bacterium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Lee, Siok Hwee (2009) Cyber risk insurance policy a proposed frameworkfor e-business in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Sabri, Mohd. Salman (2009) Data compression using and VLC and RLE in packet switched network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nawahwi, Mohd. Zaini (2009) Degradation of reactive RED 195 by selected bacteria from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

John Sitin, Colline (2009) Delay in issuance of certificate of fitness for occupation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Hock Chye (2009) Delays at unsignalised junction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Y. M. Ragab, Salih (2009) Design and fabrication of ball-mill machine for producing active carbon powder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaludin, Nur Zakiah Hanum (2009) Design and simulation of an online uninterruptible power supply. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Naidu, H. Sivanesswara (2009) Design fabrication and characterization of undoped AIGaN. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Ibrahim, Muhammad Faisal (2009) Design for testability for complementary metal oxide semiconductor analog circuit to detect parametric variation of gate leakage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Daud, Khairi (2009) Design of circular patch microstrip antenna array at 5.8 GHZ for point to point communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Shukor Lim, Abdul Haslim (2009) Determination of equilibrium beach profile for a nourished beach with a pressure equalization module (PEM) system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tengku Azmi, Tengku Sharifah Marliza (2009) Determination of vanadium (IV) and vanadium (V) using voltammetric and ion chromatographic techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yong, Zhi Xiang (2009) Developing acceptance model for enterprise resource planning system implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd.Noh, Zarina (2009) Development of a dependable distributed embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab. Adzis, Azri Hamim (2009) Development of a method to investigate the wash of recreational craft in inland waterways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokri, Kamarul Nasser (2009) Development of a web-based design and database for traditional fishing boats in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Cheen Kok (2009) Development of a wormhole router archicture for network on chip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed, Nurul Izma (2009) Development of air quality profile by using gaussian plume dispersion model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Movahednejad, Homa (2009) Development of an access control model for web services applying XML-based approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammadi, Hamed Taherdust (2009) Development of an adoption model to assess smart card technology acceptance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Munir, Fudhail (2009) Development of an efficient Lattice Boltzmann numerical scheme for simulation of shear driven cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Allahdadian, Javad (2009) Development of an empirical equation of leakage current level due to the variations of atmospheric conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Najib, Mohamed Zuhaili (2009) Development of biogranules and their application in treating synthetic textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Isnandar, Mohamad Isa (2009) Development of e-document management system : (case study : Human Resource Department of Batam City government). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Osman, Sharul Azmir (2009) Development of finite difference lattice boltzmann scheme for the computation of natural convection heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S. Dahish, Anwar (2009) The development of gis database of oil spill using remote sensing radarsat data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

S. Dahish, Anwar (2009) The development of gis database of oil spill using remote sensing radarsat data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Nik Ibrahim, Nik Mohd. Izual (2009) Development of isotropic free energy latice boltzmann scheme for multiphase simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amirbekov, Ardak (2009) Development of Kazakhstan electronic government portal for specific business section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Arsad, Azamuddin (2009) Development of river restoration plan for upstream tributary of Sungai Pulai based on water quality and land used activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jayapal, Vikneswary (2009) Development of security in wireless network using IPv6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Koay , Boon Wooi (2009) Development of single board computer based on 32-bit 5-stage pipeline RISC processor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd Elrahman Karar, Almansor Mubarak (2009) Development of stakeholder analysis matrix for satisfaction of e-learning implementation in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Tumari, Mohd. Zaidi (2009) Development of two -link flexible manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husaini, Mohd. Zamri (2009) The develpment of a computer-based-information system of sustainable legal requirement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Noor Hidayah (2009) Differentiation of accelerants from background interference in the analysis of floor mat fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hussain, Muhamad Hatta (2009) Digital modulation technique using wavelet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kipli, Kumalasari (2009) Discrepancies and ambiguities in contract document. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahmat, Normala (2009) Distributed 68HC11 microcontroller using SJA 1000AS controller area network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahadzir, Nazmy (2009) Distributed microcontroller system using canbus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Subramaniam, Murugan (2009) Dual band printed monopole antenna design for medical implantable communication system (MICS) band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad Rohi, Noorfaizah (2009) Dual modality tomography system using optical and electrodynamic sensors to obtain tomographic images of solid flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kurniawan, Iwan (2009) E-business license system (E-BLS) case study : the department of industry and trade of Batam City. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali Mohammed, Eftekhar Saeed (2009) E-counseling system for Sana'a Community College (SCC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ting, Ding Kiat (2009) E-site organiser for project monitoring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lusiani, Santy (2009) Economic impacts on local community "an analysis on dive tourism sectors' value chain" : a case study in Aur and Dayang Island, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Zalik, Wan Ewirda (2009) The effect of catalyst on soil stabilization by application of lime. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elfiano, Eddy (2009) The effect of chamber length and hot air temperature on pulse drying characteristic of aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Mohd. Fairuz (2009) The effect of creep on prestressed simply supported and integral bridge beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Astana, Dorina (2009) The effect of epoxy bitumen modification on hot mix asphalt properties and rut resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Kok Weng (2009) Effect of layeringon slope instability induced by rainfall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahmayanti, Dina (2009) Effect of level of difficulties on job performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Azralmukmin (2009) The effect of multiple lightning impulse on the electrical characteristics of transient voltage suppression diode as low voltage lightnining protective device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Salim, Nurul Ainain (2009) Effect of small scale discontinuities on rock strengths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Oh, Teck Yee (2009) The effect of surface roughness and curing condition on the ultimate shear capacity of composite slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Muhammad Lutfi (2009) The effect of temperature on prestressed integral bridge beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tharazi, Izdihar (2009) The effect of Ti-6AL-4V surface integrity using zinc coated wire in WEDM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razali, Zainab (2009) Effect of yeast extract on the flavonoids accumulation in tissue cultured orthosiphon stamineus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Soh, Wen Hann (2009) Effect oil palm fibre addition on the mechanical properties of shell mould investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kurnia, Rizka Dhini (2009) Effectiveness of e-learning implementation at UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sarbini, Noor Nabilah (2009) The effectiveness of independent bent-up bars with insufficient anchorage and inclined links as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zawawi, Mardhiah (2009) Effectiveness of industrialised building system (IBS) implementation for Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karis, Rafie (2009) Effects of mineral on the water treeing in the crosslinked polyethylene insulating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahya, Mohd. Hafiz (2009) The effects of monsoon weather on global positioning system accuracy in Penisular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdul Aziz, Sue Alina (2009) Effects of mortar towards the NDT reading equipment a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Abdul Halim (2009) Effects of prosthesis stem lengths and tapers on stress distribution in cemented hip arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Sapari, Norazliani (2009) Electrical and chemical properties of natural palm oil as a new insulation for transformer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Kusim, Aida Sulinda (2009) An electro-magnetic transient (EMT) analysis on a 132 kV rated Cu/XLPE/SCW/MDPE cable system and its related networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Mohd. Sarfudin (2009) Embedded antenna with reduced cross polarizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Paramasivam, Vishnu (2009) An embedded system for networking security applying cryptographic acceleration in field programmable gate array hardware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chia, Eunice Mei Ling (2009) The enforceability of liquidated and ascertained damages in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkefle, Azman (2009) Enhanced NIOS II instruction set simulator using systemc. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd Aziz, Zul Azri (2009) Enhancing the identity of historic living city through integrated social space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussian, Mohammed Awad Widatallah (2009) Enhancing threshold cryptography schemes in mobile ad-hoc networks during authentication process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Tulemissova, Madina (2009) Entrepreneurial marketing in Kazakhstan software development process : establishing effective guideline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shirazitabar, Seyed Ahmad Ali (2009) Entropy analysis of a thermoacoustic stack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Tahir, Mohd. Narowi (2009) The establishment of a selection guideline for construction of reinforced earth wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shaid, Syed Zainudeen (2009) Estimating optimal block size for a copy - move attack detection on highly textured image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Nesheli, Mahmood Mahmoodi (2009) Evaluation of effect of traffic signal coordination system on congestion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roshandeh, Arash Moradkhani (2009) Evaluation of effect of variable message signs on traffic surveillance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd Salleh, Khairul Anuar (2009) Evaluation of imaging performance of industrial digital radiography detector systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A.M.Mahroug, Elhusain (2009) Evaluation of methods to determine bitumen content of hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moh. Elatari, Duw Mabrouk Ali (2009) Evaluation of shear angle value using quick stop device and established formula. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alhauwari, Kamal Farag Khalifa (2009) Evaluation of shear angle values in fully orthogonal cutting using QSD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sarif, Abd. Sukor (2009) Evaluation of third class survey data for national digital cadastral database population. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Lim, Mei Keng (2009) Examining the relationship between locational preferences and property prices using hedonic model : case study : Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Shaharuzaman, Mohd. Adrinata (2009) An experimental study of steering wheel vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Imoudu, Enegbuma Wallace (2009) Extent of contractor's obligation to provide information and permitting access to his own records. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mokhtar Azizi, Nurul Sakina (2009) The extent of the contractors effort to mitigate delay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Akhir, Fazrena Nadia (2009) Extraction and idenfication of polyphenol compounds in Perlis grapevine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Zahroon, Ali Qusay (2009) Extraction handwritten characters from data entry form. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Karim, Jamikaliza (2009) Face recognition system using principal component analysis and fuzzy artmap. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kong, Weng Hoong (2009) Finite element analysis of beam to column end plate connections on major axis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Kamal (2009) Finite element analysis of welding deformation in aluminium T-Joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Hong Yong (2009) Finite element analysis on beam to column minor axis bolted end plate connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loo, Chang Soon (2009) Flexural performance of rice husk - high density polyethylene (HDPE) bio - composites profile deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Dalil, Rafidah Hanem (2009) Forecasting foreign exchange rates for CAD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Anang Masuri, Mohd. Rayme (2009) Formulation of key performance indicators through implementation of private finance initiatives (PFI) in student hostel privatisation at Universiti Teknikal Malaysia Teknikal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musu, Masturianeh (2009) Framework for stormwater asset management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shaari, Muhammad Hafiz (2009) Fraud dalam urusan pendaftaran hakmilik : kajian di pejabat Pendaftar hakmilik negeri Selangor, Shah Alam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Harun, Hilman (2009) Front-end optical receiver configuration for 3.4 GHz radio over fiber system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Basta, Kabagambe Mathius (2009) The global positioning system ambiguity problem resolution and validation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Madi, Nassir Bsher (2009) Groundwater study for shallow alluvium aquifer at Kota Bharu, Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal Abidin, Mastura Shafinaz (2009) A pH sensor using Gallium Nitide based semiconductor with gateless field effect transistor type structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammadpoursalut, Mohammad (2009) A hardware architecture of gaussian filter for digital image processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Seif, Aramesh (2009) A hardware architecture of prewitt edge detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainal Abidin, Nazariah (2009) Homestay web portal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Haron, Nuryazmeen Farhan (2009) Hydrodynamic and salinity transport model in an estuarine system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sapari, Noor Hidayah (2009) I - auto. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad Rifa'i, Aina Mardziah (2009) Identification and quantification of rosmarinic acid and quercetin contents in orthosiphon stamineus (lamiaceace). Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Algeelani, Nasir Ahmed Abdulkhader (2009) Identification of acoustic signals of surface discharges on glass insulator under different contamination levels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Koh, Alice Chee (2009) Identification of different frequency sound response from EEG signal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baloo, Lavania (2009) Impact of fertilizer application at UTM farm on water quality of a catchment area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fun, Yip Onn (2009) The impact of public amenities on housing selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Priyandes, Alpano (2009) Impact of reclamation activities to the environment : case study : reclamation in northern coast of Batam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Kassim, Naseem Asllah (2009) Impacts of landuse to water quality, mangrove forest and seagrass meadow at Sungai Pulai estuary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Rani, Wan Suhaila (2009) Impak pengabaian terhadap kualiti fasiliti fizikal persekitaran : kajian kes : sebuah hospitaliti perhotelan bertaraf tiga bintang di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Muhammad, Lailatul Niza (2009) Implementation of a calibration method for lightning locating system (LLS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed F.M., Mohamed (2009) Implementation of Carlson Survey 2009 software in survey engineering works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamed, Magid Hussein Musa (2009) Implementation of diffserv in mobile IPV6 networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmadpour, Sima (2009) Implementing central trouble ticketing as a communication tool between stakeholders of CTL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zaraki, Abolfazl (2009) Implementing modified particle swarm optimization method to solve economic load dispatch problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Suhana (2009) Implikasi perletakan terminal bas Klang Sentral terhadap pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamed Ghazali, Mohamed Haryzul (2009) The improvement of ride comfort performance in passenger road vehicles using active suspension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Hafizul Azizi (2009) Industrial imaging classification and its FPGA implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Nor Zalina (2009) Influence of carbohydrate protein coconut oil mixtures on the viability on ecapsulated spray dried lactobacillus bulgaricus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Chan, Diana Yian Lian (2009) The influence of culture on the street space in three cities in Tamil Nadu, India : Chennai, Pondicherry and Madurai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Salim, Noornadia Zharif (2009) Influence of unsignalized road junction spacing on traffic flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahyob, Gamilah Abdulwali (2009) Information and communication technology (ICT) strategic plan for Sana'a Community College(SCC),Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Parham, Nima (2009) Information security concerns towards best practices for IT outsourcing projects from the perspective of service provider in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Osman, Donia Mohammed Salih (2009) Input shaping control of a single-link flexible manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salim, Mohd. Azli (2009) Input shaping controller for flexible wiper system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suzano, Eki (2009) Integrated asset management information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Fazeli, Hamid Reza (2009) Integration of GIS and fuzzy logic for land fill site selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mansor, Muhammad Hatifi (2009) Intelligent active force control method applied to precise machining operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Ahmed, Waleed (2009) Intelligent client - side web caching scheme based on neuro - fuzzy system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad, Khairul Azman (2009) Intelligent control of a magnetic levitation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jebelli, Ali (2009) Intelligent exhaust fan controller system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab. Aziz, Salsabila (2009) The interpretation of full scale instrumented load testing and the prediction of settlement for single bored pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Basiri, Kouros (2009) An investigation into computer supported collaborative project based learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lau, Su Chien (2009) Iron (III) porphyrin dendrimer - mesoporous silica as biomimetic catalyst for selective oxidation of trimethylphenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kweku, Hammah Noriss (2009) Issues of delay in the land development process by obtaining a building permit in Malaysia and Ghana. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Karim, Khairul Anuar (2009) Isu penswastaan pengurusan sisi pepejal di Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Argun, Orhan (2009) IT students' perception on IT ethics using scenario method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Aman, Tirwani (2009) Iterative local gaussian clustering to extract interesting patterns on spatio-temporal database. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yerkesheva, Aigerim (2009) ITIL deployment in information technology department of the ministry of environment protection of the republic of Kazakhstan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Jalil, Nursyuhadah (2009) Kajian hubungkait harga rumah dengan faktor kemudahan awam menggunakan sistem maklumat geografi (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Manap, Noraniza (2009) Kajian ke atas pengurusan tapak pelupusan sisa pepejal yang berkesan : kajian kes : Arau, Perlis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Yunos Hussin, Md Jukni @ Mohd (2009) Kajian terhadap faedah pelaksanaan pengurusan operasi dan penyenggaraan untuk perkhidmatan hospital swasta kajian kes : Kuantan Medical Center. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Aziz @ Abdul Aziz, Saifuldin (2009) Kekangan dalam perwarisan tanah pusaka Felda di bawah akta (kawasan penempatan berkelompok ) 1960, kajian kes di Felda Soeharto, Daerah Hulu Selangor, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Azlan, Siti Sarah (2009) Kepuasan pelanggan dalaman terhadap fasiliti fizikal dan perkhidmatan di kompleks sukan UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Bakar, Norazmi (2009) Kerangka penghasilan parameter penilaian selepas dihuni di bangunan pejabat kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamad Hamin, Shukri (2009) Kerumitan pengeluaran sijil kelayakan menduduki (SKM) kajian kes : Taman Desa Gemilang, Sg. Pusu Daerah Gombak, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Wan Mahmood, Wan Amir Johari (2009) Kesedaran pekerja terhadap pencemaran bunyi tapak binaan di Nusajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Normaizura (2009) Keselamatan sebagai asek kualiti hidup di Iskandar Malaysia : kawasan kajian : Nusajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Zakaria, Samsol Azhar (2009) Kite ship: perliminary investigation on power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Najib, Nuur Shuhada (2009) Knowledge audit on research activities towards research university at Universiti Teknologi Malaysia (UTM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdullah, Ruzanna (2009) Knowledge sharing : a case study among parents of special children. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Gazem Al-Qubati, Nadhmi Abduljalil (2009) Knowledge sharing portal for international postgraduate students in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System .

Y. Mahssin, Zakariya (2009) Laboratory performance of semi - rigid mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Garang, Teng Kin Tai (2009) Land use modeling for population growth a case study of Skudai town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aon, Emad Fathi (2009) Laser nonlinearity compensation for radio over fiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Chee Horng (2009) Lattice boltzmann method on flow in microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Luhat, Marya (2009) Lean manufacturing aplication and implementation in a composite manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kuah, Chuen Tse (2009) Lean manufacturing through value stream mapping and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yow, Li Ping (2009) Letter of acceptance award as an unqualified acceptance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sabtu @ Othman, Hilyati (2009) Life cycle cost analysis for the repair of a ferry terminal jetty structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daood, Azam Asamm (2009) Line of sight propagation for land mobile satellite services. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mobarhan, Rokhsareh (2009) Linking ITIL with outsource services case study : center of information communication technology in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Fung, Wen Pui (2009) Load bearing autoclaved aerated concrete wall in industrialised building systems construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Ahmad Nizam (2009) Load-side voltage sag assessment : hands on investigation in Malaysia industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Daud, Aidaayu (2009) Localization of abnormality in xray images of lungs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang Ahmad, Zahari (2009) Low cost loosely coupled parallel processing system using standard processor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yulianti, Ian (2009) Low power polymeric thermo-optic digital optical switch. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Nurul Ain (2009) Maltodextrin and tapioca starch as wall material in ascorbic acid microencapsulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Chi Xiang (2009) Managing uncertainty in breast cancer dataset using rough set approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sulaiman, Najwa (2009) Manganese oxide doped noble metals supported catalyst for carbon dioxide methanation reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sim, Bee Moi (2009) Manufacturing lead time improvement through lean kaizen event. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sany, Mohd. Helmi (2009) Masalah kutipan cukai taksiran tertunggak kajian kes : Dewan Bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Alinaghian, Farnaz (2009) Meaning of streets perceived by users in urban centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Fahisal (2009) Measurement of particle size using electrostatic sensors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kwan, Ee Lun (2009) Measuring quality of fingerprint image using altera cyclone DE2 board. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bee, Soo Tueen (2009) Mechanical properties and processability of hybrid talc and calcium carbonate filled polyvinyl chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

M. Nor, Fethma (2009) Mechanics of solder joints and solder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Quek, Hsiao Pei (2009) Mechanisms of chromium (VI) resistance by acinetobacter haemolyticus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Mazlinda (2009) Medical imaging through histogram equalization and canny edge detection method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muhamad, Khalilah (2009) Mengesan perubahan litupan tanah dengan menggunakan sistem maklumat geografi berdasarkan data fotogrametri dan penderiaan jauh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kamarul Baharin, Kamariah Dzafrun (2009) Mewujudkan satu institusi pengurusan penyelesaian pembahagian harta pusaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Md. Zaki, Nurul Asyikin (2009) Microwave and microwave - vacuum drying of papaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Perumal, Logeswaran (2009) Miniaturized planar power divider for microwave application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Dalan, Zunaidi (2009) Mobile technology identification based on location of tourist mobile guide for tourism industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jamri, Mohd. Saifuzam (2009) Modeling and control of photovoltaic stand-alone system using state-space averaging method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Jahari @Mohd. Johari, Ahmad Nizam (2009) Modeling and control of the vertical motion of a remotely operated underwater vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Subha, Nurul Adilla (2009) Modeling and controller design for heating and ventilation control system using system identification approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khalifa, Mustafa Saad (2009) Modeling and controller design of a ball and beam balancer system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Bakar, Saiful Anuar (2009) Modelling and control of magnetorheological damper in semi-active suspension system of passenger vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Serenkov, Andrey (2009) Modelling and implementation business processes using UML state machine for web - based information systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Ramli, Mohd. Hanif (2009) Modelling and simulation of a microrobotic system with active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Amy Siew Wern (2009) Modelling, control and optimization of industrial suspension polyvinyl chloride reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Mohammadi, Narges (2009) Molecular database similarity searching using support vector machines (SVM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ab Rahim, Mohd Shahid (2009) Monitoring of generator's performance with respect to damping contribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jumadi, Norhaslina (2009) The most significant characteristics in demoraphic factors and it's relationship in determining affordable house Johor Bahru case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ibrahim, Rabiu (2009) Multimodal mobile application for blogging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Junos @ Yunus, Siti Aisah (2009) Network-on-chip mesh topology modeling and performance analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Y.H Ahmed, Falah (2009) A neural network approach for Osteo Arthrinit diagnosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Choo, Peng Wan (2009) Neural network design with systemc. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jabiry, Mustafa M. Khalifa (2009) A new design of variable optical attenuator based on multimode interference coupler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khalid, Khairul Azli (2009) Numerical solution to the incompressible navier stokes equations utilizing a spectral method in a stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Jun Bill (2009) Off-line thinning -based handwritten numerical string segmentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kazemzadeh, Mojtaba (2009) On-line marketing system for Ketab Farazeh to support Iranian library equipments supplier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mamat @Muhammad, Fadzilah (2009) Online job outsourcing system (BONCEE). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sihabudin Sahid, Dadang Syarif (2009) Online master project management for IT - management program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mustapha, Muhammad Firdaus (2009) Ontology - based problem solving method for dynamic scheduling in agile manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Alkarimiah, Rosnani (2009) Operational start up and performance of anaerobic stage reactor treating glucose synthetic wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Latrish, Omar Hisain (2009) Optical system for measursing concentration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jamil, Ansar (2009) Optimal forwarding routing protocol in IPV6-based wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Noor, Noorsidi Aizuddin (2009) Optimal life cycle costing in determinig floors materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Safizadeh, Mohammadreza (2009) Optimal placement of sensor and actuator for active vibration control of flexible structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Taher, Zarani (2009) Optimization of processing parameters for curcuma xanthorriza oleorasin yield and its antioxidant activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ashaari, Nur Suhanawati (2009) Optimization of sulfide oxidase production by locally isolated serratia sp. strain S002. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohd. Daud, Nur Firdaus (2009) Overcoming pressure deficiency in Sungai Rengit water distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fallahpour, Amir Hossein (2009) P-type silicon nanowire transistor modeling and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Etsu, Ishaya Iliya (2009) Packet buffer management in wimax network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Dahalan, Fazlida (2009) Packet-level spam fingerprinting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd Rahman, Raihayu (2009) Palm oil seeds sales forecasting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Wahed, Md. Najib (2009) Pandangan pengguna terhadap perkhidmatan fasiliti di taman rekreasi awam serta penambahbaikan perkhidmatan melalui kaedah penyumberan luar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdul Aziz, Anis Fauzi (2009) Parametric modeling of twin rotor multi input multi output system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sa'adon, Nor Azizah (2009) Pattern oriented design framework for agent based smart wheelchair using AgentPOD framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd Rafie, Farihan (2009) Payment dilemma for sub contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aris, Khairun Nissa (2009) Pelaksanaan lelongan awam daripada perspektif pentadbir tanah : kajian kes di Pejabat Daerah dan Tanah Kuatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Soleman, Noor Zulaiha (2009) Pembahagian harta sepencarian peneroka Felda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Zabidi, Za'imah (2009) Pembangunan modal insan di Iskandar Malaysia dan strategi mengurangkan masalah pengangguran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Faizal, Fazleen (2009) Pembangunan perumahan Iskandar Malaysia dan faedahnya kepada rakyat tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Hamzah, S. Hasila (2009) Pemencilan dan pencirian bakteria dari telaga minyak tempatan untuk penghasilan asid dan pelarut organik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Talib, Hisa (2009) Pencemaran air dan aktiviti kerja tanah di Putrajaya kajian kes : Tasik Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Md Napis, Ishak (2009) Pengurusan dan mekanisma pemindahan bahan batu di negeri Perak Darul Ridzuan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ishak, Natasha (2009) Penilaian kamera digital bagi pemetaan sungai menggunakan kaedah fotogrametri jarak dekat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Hashim, Khairi Afendy (2009) Penilaian kesesuaian kaedah fotogrametri digital jarak dekat untuk pengukuran objek tiga dimensi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamad Saleh, Rahim (2009) Penyimpanan database berdigit bagi pemulihan bangunan warisan melalui kaedah terrestrial laser scanning (TLS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Rahmat, Nurul Hazira (2009) Perancangan harta mengikut undang-undang Islam menggunakan konsep Hibah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Udin, Wani Sofia (2009) Perbandingan parameter kalibrasi kamera digital berlainan jenis menggunakan kaedah fotogrametri jarak dekat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Affendi, Nur Adyani (2009) Performance analysis for wimax in outdoor environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Haq, Reazul Haq (2009) Performance evaluation of different types of graphite electrodes on titanium (Ti-6AI-4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hirman, Hasnita (2009) Performance of full scale embankment of soft clay reinforced with bamboo geotextile composite at the interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hanipiah, Mohd. Zulkifli (2009) Performance of full scale embankment on soft clay reinforced with high streght geotextile at the interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad @ Munir, Samikhah (2009) Performance of hot mix asphalt gradation using bailey method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Iberahim, Zuhaida (2009) Perlaksanaan konsep 5:95 dalam sistem penyampaian perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Yahya, Mas Midyawan (2009) Permasalahan program penyatuan dan pemulihan tanah felcra berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jusoh @ Alias, Nor Zamiha (2009) Pervaporation separation of methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Saeed Baashar, Abdelsamad Abdelwahab Mohamed (2009) PID controller tuning scheme by using particlesswarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Umor, Noor Azrimi (2009) Pilot scale application of selected dye decolourizing bacteria for the treatement of textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohammed Alzahrani, Salha (2009) Plagiarism auto-detection in Arabic scripts using statement-based fingerprints matching and fuzzy-set information retrieval. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Thabet Al- Maqtari, Assem Mohammed (2009) Planning e-learning system for Sana'a Community College (SCC) in Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ga'al, Dahir Abdi (2009) Policy management issues in organizations case study : Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Halim, Nasrul Helmei (2009) Portable standard lighting impulse current generator for distribution-rated arrester testing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Uisimbekova, Anar (2009) Post - implementation strategy for the adoption of e-portfolio among UTM students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Raja Mukhtaruddin, Raja Nur Syazana (2009) Potential distribution of high voltage cable at grounded and ungrounded system using numerical method+G42. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Teck Ing (2009) The potential of objective-subjective as project procurement approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Harizah (2009) The potential of roof runoff as a solution for water scarcity problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tuah, Norhashila Shuhada (2009) Predicting the behaviour of flush end plate connections using strain gauges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahjuddin, Mohd. Mursyid (2009) Prediction of an added resistance and speed loses for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tengku Ngah, Tengku Ida Sofina (2009) Preparation and properties of proton exchange membrane based on poly(vinylidene fluoride) by radiation-induced grafting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Embong, Abd Halim (2009) Prestasi persekitaran fizikal bilik darjah sekolah rendah dibawah piawaian JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Nonso, Igboamalu Frank (2009) Printed diversity antenna for on-body communication systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaneshin, Masoumeh (2009) Printed loop antenna for medical implant communication system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Zin, Rohani (2009) Process modelling of degumming and bleaching in palm oil refining using artifical neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Goh, Meng Seng (2009) Production of surfactant from oil palm shell for enchanced oil recovery processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Rosly, Roslinda (2009) The profile of construction contract termination cases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sharif, Abdullahi Mohamud (2009) Project time management risk assessment tool for software development project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jama, Mohamud Omar (2009) Propagation measurements and prediction of bwa based on downtilting antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lam, Hong Yin (2009) Propagation studies for mobile communication via hign altitude platforms in urban areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahmoudian, Peyman (2009) Properties of acrylic polymer modified concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elshiekh Omer, Mohamed Omer (2009) Properties of mortar with palm oil empty fruit bunch fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suyub, Amino Agos (2009) Proses permohonan cadangan pemajuan melalui pusat setempat - one stop centre (osc) Kes kajian : OSC Majlis Perbandaran Port Dickson, Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Fadzill, Mohd. Farhan (2009) Prospect of flexible housing for lower income group in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Shamsudin, Mohamad Amir (2009) PSO-based optimum design of PID controller for two wheel inverted pendulum mobile robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Rahim, Nazirah (2009) Public works procurement the European experience. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammad, Hairuddin (2009) Quality and satisfaction of house owners for industrialised building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bohari, Asmah Alia (2009) Quantity surveyor's liability during pre tender stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Elengoe, Asita (2009) Rabbit polyclonal antibody induction against human Coxsackie Adenovirus Receptor (CAR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Md Yunos, Norhazwani (2009) Reactive tabu search approach for solving capacitated arc routing problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Harouni, Majid (2009) Real-time persian handwritten character recognition using back propagation with multilayer perceptron neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ong, Kuan Yuen (2009) Recoveries of differing site conditions in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mustaffa Kamal, Mohd. Firdaus (2009) Reduce, reuse, recycle and recovery technique in sustainable construction waste management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

J. Sawadi, Bahaa Alden (2009) Reflectarray antenna design for satellite broadcasting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saadan, Zuridah (2009) Rekabentuk dan pembangunan sistem pengecaman corak carta kawalan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Borhan, Noor Hazlini (2009) Reliability of coding category in students' e-learning discussion forum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Razak, Azri Rasyidi (2009) Removal of endocrine disrupting chemicals using low pressure reverse osmosis membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shah Adyll Dadameah, Sha'azim Ibhaidullah Dadameah (2009) Render application management protocol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamad Ramly, Zuhaili (2009) Rescission, variation and waiver of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chau, Kok Foo (2009) Reviewing the approval process flow of housing development in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabirin, Mohammad Ridhuan (2009) RFID in halal tracking system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chan, Sook Huei (2009) Rippability assessment of quartzite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Uchechukwuka, Afam-Okocha (2009) Risk assessment framework for enterprise systems integration : case study : manufacturing enterprise in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ismail, Asmawi (2009) Risk factors for supply chain management of fast container shipping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Al-Mola, Mohammed Hussin Ahmed (2009) Robust intelligent active force controller for a wagner brake model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abas, Nor Haslinda (2009) Safety cost in scaffolding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Altalhi, Ahmed Salem (2009) Saudi car plate recognition using invariant moment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim, Sahrul Hilmi (2009) A scalable broadband optical access network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Asmadi (2009) Schedulling simulation for high-rise building comparison on time impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shawal, Mohd. Syahar (2009) Schlieren imaging technique for high speed combustion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yassin, Mohd. Nazrin (2009) Secure hash algorithm and secure scheme for key storage in trusted platform module. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Teo, Koon Hau (2009) Seepage analysis and slope stability analysis of earthfill embankment dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khudhair, Yassir Zouher (2009) Segmentation of fingerprint image by using scanline algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Megat Jaafar, Megat Zahari (2009) Semi top down bottom up construction work in deep basement of tall building in Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Mohd Nasir (2009) Service quality evaluation of container haulage in southern region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali, Abdul Razak (2009) Settlement of road embankment on prefabricated vertical drain treated soft ground. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hafiz, Mohd. Hafizan (2009) Sewage sludge land application for the growth of edible plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Sapiee, Mohd. Razali (2009) Simulation and design of road vehicle following system with adaptive gain controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahya, Zulkifli (2009) Simulation of lighting performance of a design lightning protection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hakami, Mohammed Ali (2009) Simulation of solar panels effect on microclimate in arid areas using remote sensing technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

A. A Elkaseh, Alaa (2009) Simulation of supply chain management for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Mohammed, Basheer Abdul Wareth (2009) Simulation of tasks in bridge construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Nur Ammi (2009) Simulation of temperature profiles for coupled single mode fibers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Hassan, Walid (2009) Single board computer based hardware-input. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Suhaimi, Mohd. Hafizie (2009) Sistem pemantauan ternakan = husbandry monitoring system (HUMOS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Saad, Aminah (2009) Sistem pemilihan dan permohonan pinjaman berasaskan sistem bantuan keputusan : Dr. Loan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Sharif, Rodhiah (2009) Sistem pengurusan aset = asset management system (AMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Bodaghi, Behnam (2009) Six degrees of freedom motions of a spar platform in irregular waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shafii, Mohd. Amin (2009) Skid resistance and the effect of temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. A. M. Ali, Awfa (2009) Slant path rain attenuation profile obtained from radar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

M.Askir, Alyahseh Nagi (2009) Slide mode control for coupled-tanks system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Mohd. Dahalan, Mohd. Rohaimi (2009) Sliding mode control power system stabilizer for multi machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Siaw Chen (2009) SoC test scheduling algorithm using enhanced rectangle packing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chang, Tun Hua (2009) Software development for flexible pavement thickness design based on aastho and road note 31. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yeo, Pei Pei (2009) Software development for flexible pavement thickness design based on ATJ manual. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Siew Ling (2009) Software development of car plate recognition system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Afrinaldi, Feri (2009) Software for integration of end-of-life option determination, disassemblability evaluation and disassembly sequencing optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razmara, Pegah (2009) Software testing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Veloo, Krishna Veni (2009) Sol-gel hybrid methyltrimethoxysilane-octadecyltrimethoxysilane as solid phase extraction sorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Nor Syaidah (2009) Sol-gel hybrid solid phase extraction sorbents for organophosphorus pesticides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Matondang, Muhammad Zaini (2009) Solid model reconstruction using neural network and the mathematical representation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Ismail, Norhairani (2009) Solid state fermentation of palm kernel cake for the production of beta-mannanase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Fon, Chew Wei (2009) Solving equal size facility layout problems using bees algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheang, Soo Yee (2009) Speaker identification using artificial neural network by combination of resilent back - proagation and gradient descent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd Jar, Ayathull Dhalayla (2009) Spectroscopic and chromatographic technique for forensic discrimination of marker pen inks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Hamid, Zaid (2009) Spectrum investigative model for sharing analysis between IMT-advanced system and fixed satellite service receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Johnson, Melvin (2009) Staff time attendance based on Iris Pattern : (case study : FSKSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Dom, Faizal (2009) Statcom control for operation under unbalanced voltage conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chong, Tun Yen (2009) Static lateral bracing to tall building structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ab. Majid, Wan Noor Atimmi (2009) Statistical analysis of non-destructive test in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroughi-Sabzevar, Mohsen (2009) Status of e-business implementation in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mai, Muhammad Yahya (2009) Strategising facilities management to meet international students requirement in UTM, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Aris, Amer Faizal (2009) Strength, threat and cultural differences : a case study of Malaysian contractor in Indonesian construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mbuli, Charles (2009) Student performance reporting system at atnzania public service college. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

H. Shaban, Mohammed (2009) Students requirement analysis for the e-marketing through FSKSM-UTM online system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Bellbem, Jegathesan (2009) Study of cost functions for discretized data using ANN classifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jong, Chin Hua (2009) Study of particle swarm optimization fitness functions for multilayer perceptron network in classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed Esa, Norshasafarezan (2009) Study on performances of bridgeless power factor correction boost rectifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Badri, Mohd. Shahari (2009) Study on sound intensity pattern of small motor for active noise controller development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ardianshah, Mohammad Shahril (2009) The study to optimize the payback period for PV installation in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zarzali Shah, Aishah (2009) Surface treatment of polymethylmethacrylate by excimer laser ablation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Cheng, Chen Kong (2009) System-on-chip (SoC) testing using adhoc high-level design for-testability method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yeong, Lee Teng (2009) Tahap kepuasan penghuni terhadap fasiliti di skim kondominium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdul Rani, Rosnita (2009) Tahap risiko di peringkat rekabentuk dan pembinaan untuk projek di Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz, Baharuddin (2009) Takharuj dalam pembahagian pusaka Islam : kajian di daerah Kota Setar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Wong, Jee Foong (2009) TARC e-learning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lo, Teck Yin (2009) Temperature distribution and displacement analysis of fillet joint by using FEA software and experimental technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nordin, Noorida Haswardani (2009) Tender evaluation using "cut-off" method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajagopal , R. Selvakumar (2009) Testing and debugging mechanisms for network-on-chip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Check Hieng (2009) The awareness of call center in improving facilities management delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Alias, Nurul Ezaila (2009) The development of vertical mosfet model incorporating a dielectric pocket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Nor Diana (2009) The effect of copigmentation on the stability of butterfly pea anthocyanins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Pang, Yong Jia (2009) The effect of heat treatment on the mechanical properties of copper - management alloys for marine applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Aziz, Norazila (2009) The fabrication and characterization of 2x2 fiber-based couplers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Stella, Wong Chou Ping (2009) The influence of status and minimum facility requirement in gated and guarded landed terrace house in Nusajaya, Johore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Borazjani, Parniam Najafi (2009) Time - context based trust in semantic web. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mad Sani, Nur Diyana (2009) Tindakan pihak berwajib di dalam usaha menyediakan tempat tinggal pekerja asing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Suratman, Faridah (2009) Tissue culture and transformation of citrullus lanatus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Esa, Fahmirudin (2009) The transmission curve of a fabry perot system based on plane and spherical mirror separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramani, Anis Niza (2009) Transmission losses allocation in competitive electricity market environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad Radzi, Nur Hanis (2009) Transmission service charge methodology for pool power. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Raja Nordin, Raja Norazli (2009) Tunggakkan sewa perumahan awam kos rendah (PAKR) di Negeri Sembilan : kajian kes : PAKR Ayer Hitam, Jempol dan PAKR Pengkalan Durian II Port Dickson. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Yousif Yacoub, Ammar Hussam (2009) Tuning of PI controller for coupled-tank liquid level control system using a stochastic search technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Azam, Nur Syahid (2009) Tunning of pid controller for coupled-tank liquid levl control system using a stochastic search technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Hamzah, Amizah (2009) Two-dimensional elliptic equation for breast cancer detection using high performance matlab distributed computing server. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mustapha, Amir Hamzah (2009) Ultimate unit skin resistance evaluation using global strain extensometer for cast in situ pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

lhedyan, Mohammed Abdulmohsen (2009) Urban change detection of Al-Khafji city Saudi Arabia using remote sensing data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Sapawi, Roslina (2009) Urban heat island mitigation through green roof technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Razali, Norrazizie (2009) Usability study of UTM's school of graduate studies (SPS) website for customer satisfaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zulkarnain, Noor Azwa (2009) The use of biocomposites to retrofit concrete columns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Jessie Grace Poh Ling (2009) The use of contingent valuation method (willingness to pay) in an environmental assessment of a dredging project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shah Rusmi, Mohammad Hizam (2009) The use of FRP pultruded section for simple truss model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amiri, Iraj Sadegh (2009) The use of lidar system in determination of attenuation coefficient of transparent materials (water, glass and perspex) and range finding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ayob, Nurul Zakiah (2009) User interface for mobile reload. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammed Ahmed, Rana Attaelmula (2009) Using health informatics in HIV disease prevention and management, electronic record system (web base application). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed @ Mohd. Adnan, Azmi (2009) Variation works in privatization highways in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Nuzulha Khilwani (2009) Vehicle inspection centre appointment scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Mohd. Firdaus (2009) Vibration suppression of handheld tool using intelligent active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M. Ibrahim, Tamim (2009) Video transmission over MAC of multiband OFDM UWB network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yola, Lin (2009) Walkability improvement project in Sudirman street, Pekanbaru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Goh, Hooi Bein (2009) Wave transmission and dissipation coefficients of a modified artifical mangrove root system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Maliki (2009) Wavelet based receiver for digital modulation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Suaid, Nor Suraya (2009) Web-based application for value management during judgement phase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Nor Asma (2009) Web-based decision support system (WDSS) for supplier selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Joei, Ong Suk Mei (2009) A web-based e-learning system using semantic web framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Subbiah, Ahgalya (2009) Web based matchmaking : an application on developing a matrimonial based web service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Khairuddin, Nozieana (2009) Wheat-based antimicrobial packaging film incorporated with lysozyme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Jamal, Siti Khalijah (2009) Wire electro - discharge machining of titanium alloy (TI6AL4V) using brass and zinc coated brass wires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Noor Ezan (2009) A digital signal processing approach to analyze gel electrophoresis image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Misnan, Mohamad Fairdaus (2009) A study on readiness and implementation of e-training for UTM academic staff. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Prabhakaran, Praseetha (2009) Ability of polyethylene particles of various sizes to be engulfed by murine macrophage in vitro. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohammed, Zeaid T. (2009) Acceptance of information and communication technology in education among secondary schools teachers in Skudai, Johor, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Yee, Shuh Fieu (2009) Adoption of e-government services in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hamidon, Nurul Nadiah (2009) Aminopropyltrimethoxysilane-polidimethysiloxane as sol-gel hybrid extraction sorbent for organophosphorus pesticides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Voon, Chui Khim (2009) Analytic hierarchy process in academic staff selection at Faculty of Science in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Norlaily (2009) Biosorption of chromium (VI) by chitosan immobilized acinetobacter haemolyticus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Jamil, Julieanah (2009) Consumer acceptance towards roselle herbal drinks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Thoo, Ai Chin (2009) Critical success factors of supply chain management in Flextronics Technology (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Tan, Owee Kowang (2009) Efficiency product development management at Dyson Manufacturing Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Ali, Nurul Huda (2009) Electronic commerce adoption : an emplirical study of small and medium enterprises (SMEs) in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Jamlie, Norhasni (2009) Factors that influences EDI adoption among SMEs in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Fahmie Ramlee, Shah Iskandar (2009) Hubungan antara aktiviti pembelajaran informal dengan pekerja berpengetahuan di Universiti Malaysia Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Anoi, Sekam (2009) Hubungan antara tahap penglibatan dengan kaedah pembelajaran informal di Jabatan Siasatan Jenayah Narkotik Ibu Pejabat Polis Kontinjen, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohd. Yusop, Yusharifuddin (2009) Hubungan antara tekanan kerja dengan komitmen terhadap kerja pegawai dan anggota dalam pasukan Polis Diraja Malaysia : satu kajian di Batalion 1, Pasukan Gerakan Am, Ulu Kinta, Ipoh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Safari, Mapijan (2009) Hubungan di antara gaya kepimpinan dengan kepuasan kerja di kalangan awam : satu kajian kes di Pejabat Setiausaha Kerajaan Negeri Johor, Nusajaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Tan, Chiew Ting (2009) Hubungan di antara iklim organisasi dengan kepuasan kerja di kalangan staf sokongan Senai Airport Sdn. Bhd. Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ghafourian SharifHeravi, Mona (2009) Investigating the relationships between transformational and transactiona l leadership styles and turnover intention in Tehran IT SME's. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Khidzir, Suhaili (2009) Kajian kepuasan pelanggan terhadap kualiti perkhidmatan kaunter mengikut model servqual. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ismail, Shah Aruzaman (2009) Keberkesanan pemindahan latihan dikalangan pekerja di Suruhanjaya Pilihan Raya Malaysia, Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Samad, Mariah (2009) Keberkesanan pemindahan latihan program "smart orange" di kalangan pihak pengurusan di TM negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Rahman, Rosli (2009) Kesan aktiviti pembelajaran informal terhadap kewujudan pekerja berpengetahuan dalam kalangan guru di Sekolah Menengah Kebangsaan Dato' Ali Haji Ahmad, Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Wan Mohamad, Wan Maisara (2009) Measuring the effectiveness of Malaysia government online presence : a study on websites and emails. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Hasnan, Syamzurina (2009) Neuro-fuzzy based power system stabilizer of a multi-machine system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Yusof, Muhamad Ridha (2009) Pemindahan latihan pengurusan kualiti 5S dan hubungannya dengan kepuasan kerja : kajian di ibupejabat FELCRA Berhad Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Hussin, Nor Zuhailah (2009) Personaliti dalam pemilihan kerjaya di kalangan pelajar di Pusat Perindustrian dan Pemulihan OKU (PLPP) Bangi, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ng, Siew Ming (2009) Petroleum terminal's operation processes on vessel turnaround time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salleh, Siti Hasliah (2009) Polisi dan amalan budaya kerja selamat di kalangan staf teknikal fakulti berisiko tinggi di UTM, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Sharif, Mohd. Faez (2009) Screening of selected polyphenol compounds in palm oil mill effluent (POME). Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mat Hazir, Nursakinah (2009) Statistical examination of common characteristics for disguised handwriting amongst Malaysian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Che Yaacob, Yuzlina (2009) Tahap kesediaan pelatih dan hubungannya dengan keberkesanan program latihan penulisan efektif : satu kajian di Johor Corporation, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Rauf, Siti Hajar (2009) The decision making process in spin-offs formation : a case study at UTM and UPM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Xie, Yong Hui (2009) The impact of the relationship between the introducer and the referral on the referral's job performance : a study in mainland China. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Kadir, Mohammed Ridha (2009) The use of electronic mail as a communication tool among Johor state government officers in light of the Johor electronic government settings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Jamaludin, Khairur Rijal (2009) Kesan saiz dan bentuk partikel serbuk SS316l terhadap parameter pengacuanan suntikan logam menggunakan rekabentuk eksperimen. PhD thesis, Universiti Kebangsaan Malaysia, Fakulti Kejuruteraan dan Alam Bina.

Supaat @ Supaa, Khasanah (2009) Pencerobohan tanah kerajaan bagi tujuan pertanian (kajian kes : Daerah Batu Pahat). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Bakhary, Norhisham (2009) Structural condition monitoring and damage identification with artificial neural network. PhD thesis, University of Western Australia.

A. Saad, Ashrif Masoud (2009) Aggregate and binder application rate with different number of passes for surface dressing performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Hasrina (2009) A development of slant path rain attenuation statistic using synthetic storm technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Omran, Ahmed Mohamed (2009) FPGA implementation for fault detection on a power transmission lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kashif, Kashif (2009) Intelligent control of diving system of an underwater vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gholami, Majid (2009) Arcing fault recognition using spectral analysis method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Yah Jin (2009) Mobility enhancement of nanoscale biaxial strained silicon metal-oxide semiconductor field effect transistor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Neoh, Chai Chen (2009) High speed serial input/output (I/O) time and frequency characterization with correlation method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rufai, Ibrahim Sada (2009) Rugu National Park, Nigeria evaluation of its benefits using protected area benefit assessment tool. (PA-BAT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sulong, Akmal Wani (2009) Cost of compliance with safety and health requirements in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esmaiel, Amjad Ali (2009) Multiple classifier for on-line signature verification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Basiron, Anida Suharti@Ami Ronida (2009) Project risk factors : case study of Ministry of Education projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Irwansyah, Arif (2009) Elliptic-curve cryptographic architectures for system-on-chip based on field programmable gate arrays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Radzi, Azura (2009) Trend analysis of sea level rise for West Coast of Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd Akhir, Chairil Anwar (2009) Sistem gerbang pembayaran atas talian melalui internet. Masters thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat .

Safri, Dayang Sabriah (2009) A comparative study of construction project delays in Johor and Sabah region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd Mahir, Fatimatuzahrah (2009) Predicting the behaviour of extended end plate connections using strain gauges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shukor, Faudziah (2009) Comparison of back analysis and measured lateral displacement of cantilever diaphragm wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Ilsaeh, Ibrahem Salem (2009) Static security assessment in deregulated power system using artificial inteligence techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Lee, Han Wei (2009) Rates collection in Manjung municipal council. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Razavi, Meisam (2009) Strengthening of under-strength concrete using FRP fabric. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amil, Mohd Azril (2009) Supplier performance assessment tool in automotive industry using multivariate analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Kesah, Mohd Nazaruddin (2009) Secondary bending moment in the design of beam with trapezoid web profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Zin, Mohd Rody (2009) The simulation of droplet motion by using lattice boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mishan, Mohd Taufik (2009) Comparison between relational database and XML in querying motif sequence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd Nordin, Murni Norestri (2009) Ultrasound device tester. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mustafa Kamal, Noor Muslieah (2009) Kajian pelaksanaan schoolnet di sekolah-sekolah menengah Daerah Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Nasir, Noor Sharliana (2009) Pelaksanaan sistem modular dalam kursus amalan bengkel mesin di Sekolah Menengah Teknik Zon Selatan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jusoh, Norhana (2009) A ferrocene based glucose biosensor with an extended linear measuring range. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamad Ali, Norwati (2009) Judicial interpretations of the term ‘Lump Sum’ in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Al Hashi, Nouri Ali Al Mabrouk (2009) Text extraction from invariant complex image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Hassim, Nurul Farhanah (2009) Sistem pengesanan bagasi menggunakan teknologi RFID bagi Haji dan Umrah “BAGTRAC”. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Quek, Keng Hua (2009) Connection systems for braced and unbraced precast structure due to lateral loadings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd Noor, Rozaimi (2009) Performance of mat (or raft) foundations due to settlement problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nyat, Samsudin (2009) Sistem Pemantauan Pengurusan Projek Teknologi Maklumat ( PROMIS ) Pusat Teknologi Maklumat Dan Komunikasi. Masters thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat .

Mohd Ibrahim, Shazana (2009) Chemical precipitation of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Adnan, Siti Sarah (2009) The effectiveness of electrodes types on electroosmosis in Kahang Clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaian, Siti Suhana (2009) Generalized fuzzy topographic topological mapping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Cher Siang (2009) Behaviour of pin partial strenght beam-to-column connections with double channel cold-formed steel sections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hu, Laey Nee (2009) Boundary integral equations approach for numerical conformal mapping of multiply connected regions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Ali, Nor Muhainiah (2009) Capability and homological functors of infinite two - generator groups of nilpotency class two. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chuprat, Suriayati (2009) The deadline-based scheduling of divisible real-time workloads on multiprocessor platforms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Samad@Mahmood, Md. Fahmi (2009) Evolutionary computation for model structure selection in system identification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Priyandoko, Gigih (2009) Intelligent active force control of a vehicle suspension system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Misnan, Mohd. Saidin (2009) Model membangunkan budaya keselamatan dalam firma pembinaan di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Sipan, Ibrahim @ Atan (2009) Model penilaian massa berasaskan analisis spatial bagi tujuan keadilan dan keseragaman taksiran harta. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Talib, Rohaya (2009) Pembinaan dan pengesahan instrumen ujian literasi pentaksiran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Othman, Nooraini and Leow, Run Li (2009) Penggunaan e-learning dalam kalangan pelajar-pelajar sarjana muda teknologi serta pendidikan (kemahiran hidup). Other thesis, Faculty of Education, UTM.

Othman, Nooraini and Yek, Leh Chiong (2009) Tahap kefahaman dan amalan konsep pendidikan sepanjang hayat dalam kalangan pelajar tahun empat sph di UTM. Other thesis, Faculty of Education, UTM.

Othman, Nooraini and Mispan, Siti Hadijah (2009) Faktor-faktor yang mempengaruhi pengajaran dan pembelajaran di dalam bengkel kemahiran hidup di dua buah sekolah menengah, Muar, Johor. Other thesis, Faculty of Education, UTM.

Othman, Nooraini and Omar, Erniey Hasmieza (2009) Tahap kesediaan guru kemahiran hidup mengajar dalam bidang elektronik. Other thesis, Faculty of Education, UTM.

Othman, Nooraini and Mohd. Noor, Noor Idahwati (2009) Hubungan antara personaliti Islamik, sikap belajar dan pencapaian akademik pelajar Islam tahun akhir fakulti pendidikan, UTM Skudai. Other thesis, Faculty of Education, UTM.

Zakaria, Zainal (2009) Characteristics of liquefied petroleum gas in storage during exhaustion process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Johari, Anwar (2009) Design and operating parameters of a fulidized bed for the combustion of municipal solid waste using standpipes air distributors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Kok, Boon Ching (2009) Development of dynamic equivalents for interconnected power systems using identification approaches. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khattak, Muhammad Adil (2009) Effects of absorbed hydrogen and thermal exposure on mechanical properties, crack opening and fatigue crack propagation of welded steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Mokji, Musa (2009) Features construction for starfruit quality inspection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaari, Roziana (2009) Human resource development and knowledge sharing practices among academicians in Malaysian Public Universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Salleh, Dani (2009) Improving off - site infrastructure provision through the Planning Approval System in peninsular Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Madar, Ahmad Rizal (2009) Keberkesanan animasi grafik dalam kalangan pelajar berbeza gaya kognitif dan kebolehan visualisasi spatial di Politeknik. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Husain, Abdul Rashid (2009) Multi - objective sliding mode control of active magnetic bearing system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Masri, Rohaidah (2009) The nonabelian tensor squares of certain bieberbach groups with cyclic point group of order two. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mustapha, Norzieha (2009) Numerical modelling and simulation of blood flow through a multi-irregular stenosed artery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Hamid, Mohd. Zolkifli (2009) Pendekatan penyeliaan dalam latihan mengajar pendidikan teknikal dan kejuruteraan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mutusamy, Khairunisa (2009) Properties of palm oil fuel ash cement based aerated concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaan, Saiful (2009) Rekabentuk penstabil sistem kuasa saraf - kabur bersepadu berkomputer untuk set alternator mikro. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Basar, Norazah (2009) Synthesis of insect lipid using organobismuth remote stereocontrol of acyclic 1,3, 5 - trimethyl compounds. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Nazihah (2009) Theoretical foundation for digital space of flat electroencephalogram. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Nasrudin, Farah Suraya (2009) Painlev analysis and integrability of systems of nonlinear partial differential equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Hadi, Norha (2009) Gain coefficient and resonator losses of neodymium- doped yttrium aluminium garnet laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kouhdaragh, Vahid (2009) Low noise amplifier design for radio telescope system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Adnan, Noorazlina (2009) Flame retardancy and mechanical properties of poegmah compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Baharin, Nor Hatini (2008) Effect of accelerometer mass on thin plate vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said, Norsahida (2008) Determination of soil erosion parameters for Malaysian conditions using remote sensing and geographic information system approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Wasoh @ Mohamad Isa, Halim (2008) Analisa punca masalah kecacatan produk menggunakan alat kawalan kualiti berstatistik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ho, Fu Haw (2008) Production scheduling system for job shop enterprise using ANT colony optimization approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Nordila (2008) Characterization of convective rain in Klang Valley, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Anuar, Norzana (2008) Performance of perforated piles as a wave attenuator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lazim, Azrina (2008) An optimization of tin plating process using design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Karim, Mohd. Fauzi (2008) Corrosion behavior of deformed steel for automobile parts in various environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Ahmad Mazlan (2008) A comparison between blast debris from lightweight and normal concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Ming Jiun (2008) Effect of alumina-formers addition on the isothermal oxidation of TI-AL based intermetallics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Nor, Nurzahwani (2008) Protein from fermented prawn waste silage as an ingredient in the diet of seabass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Ming Hui (2008) Seismic effect on precast concrete structure for beam to column connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Idris, Siti Rabiatull Aisha (2008) Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ong, Wei Rex (2008) Effects of chromium addition on fatigue crack growth behavior of titanium aluminides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Wen Hong (2008) Interpolation and mapping of the total electron content over the Malaysian region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mamat, Rosmawati (2008) Evaluation of marshall properties of asphalt mixtures with aggregate gradations designed using the bailey method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Akmal Nizam (2008) Swirl flow in combustion chambers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Juliawati (2008) Biotribocorrosion performance of titanium alloy Ti-6AI-4V and stainless steel 316l under simulated body environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Najam, Ibrahim Salem (2008) The supported grid tool for measuring an applicability of medical dataset visualization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ayat, Masarat (2008) Implementing ITIL - service support in the infrastructure and service unit of CICT, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Magalingam, Pritheega (2008) Comprehensive analysis on hardware forensic for gambling machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Osman Widaa, Amro (2008) The influence of extended warranty policy in Malaysian culture perspective : a case study in automobile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Saeed Al-Amoudi, Mohammed Hussein (2008) Analysis of an intrusion detection system based on immunilogy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Basri, Mohd. Ariffanan (2008) Medical image classification and symptoms detection using neuro fuzzy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Stapa @ Mustapa, Muhamad Azhar (2008) The comparison of tardiness in scheduling techniques for task distribution using grid simulation tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

M. Albareki, Mustafa Ali (2008) Comparison between transmission control protocol schemes on wireless environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Omar, Nazrool (2008) Dynamic model for risk analysis of picture archiving communication system (PACS) at Hospital Selayang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Rashiddy Wong, Freddawati (2008) Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Attir, Hisham Mostafa (2008) An alternative route optimization handoff scheme for mobile IPV6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Balagatabi, Hossein Nematzadeh (2008) Modeling activity diagram to colored petri net for validation and verification based on non functional parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali, Md. Liakat (2008) Impact on bus superstructure due to rollover. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husin, Nor Azura (2008) Back propagation neural network and non-linear regression models for dengue outbreak prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamad, Rafidei (2008) A new search and extraction technique for motion capture data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Oshaghi, Safoura (2008) Study of interfacial reactions between lead-free solders and immersion silver finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eljetlawi, Ali Mohamed (2008) Study and develop a new graphical password system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chai, Erwin Pak Shin (2008) Capillary barrier effect on the response of residual slope to rainfall infiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Achin, Hamidi (2008) Secure framework for implementing close circuit television (CCTV) system as a crime prevention tool : case study (Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Fuad Ngo, Juliza (2008) Risk assessment using pool fire and health index analysis at bioenergy plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Shan Chin (2008) Pencirian sifat komposit polimer bergentian semula jadi untuk aplikasi struktur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Mohd. Fauzi (2008) Physical flood modelling evaluation of river meandering channel in tidal effected reach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ithnin, Noorafidah (2008) Determination of mixing and compacting temperatures for hot mix asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Romali, Noor Suraya (2008) Evaluation and performance of gross pollutant traps (GPTs) for open channel flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahi, Noraziah (2008) Minimising construction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Eldagal, Omar Elmukhtar (2008) Study on the behaviour of high strength palm oil fuel ash (POFA) concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Shakila (2008) Tertiary treatment of palm oil mill effluent (POME) using hydrogen peroxide photolysis method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh @ Aman, Shiadri (2008) Causes of poor participation of local workers in Malaysia construction industry and strategies for improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Hean Seong (2008) Behaviour of cold formed steel under axial compression force. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Trang Nhat, Tran (2008) The relationship of bitumen content, aggregate surface area, and extraction time using asphalt ignition furnace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Victor Aik Jin (2008) Lean construction : knowledge and barriers in implementing into Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Wahab, Aiza Norwani (2008) Aircraft noise level study at the Sultan Ismail International Airport. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzani, Norfatiha (2008) The eco-labeling on sustainable roof materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramlee, Norlaila (2008) Effect of pH, temperature and chloride concentrations on the corrosion behaviour of welded 316L stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bashir, Abdullahi Abdullatif (2008) Simulation safety management of IBS construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainuddin, Ahmad Sayufei (2008) Maintenance consideration in slope design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Balrwin, Rafeg Ali (2008) Highway interchange simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Zaradiah (2008) Challenges face by Malaysian contractors in international ventures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulfatman, Zulfatman (2008) Identification of test rig for a quarter car active suspension systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hammuda Aluhwal, Omar Kalifa (2008) Simulation study of improving oil recovery by polymer flooding in a Malaysian reservoir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mahat, Mohamad Mazwan (2008) The effect of stents structural parameters to flow in stented aneurysms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramali, Khairun Nadwah (2008) The impact of road construction on water quality at Kg. Sengkang, Mukim Gerisek, Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Muhamad Zuhairi (2008) Flow analysis of copd effects in human airways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdulgader Dow, Hamed (2008) Effects of air void and porosity on moisture damage of Malaysian specialty HMA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Zafri (2008) Concrete practice and defects during construction - case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad @ Mohamad, Md. Fauzi (2008) Development of quality improvement framework based on Japanese practices for electrical and electronics industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohieel El Dien Mansour Saqr, Khalid Mohammed (2008) Design and simulation of an exhaust based thermoelectric generator (TEG) for waste heat recovery in passenger vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.