Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 2437.

Article

Kimi, Melody and Yuliati, Leny and Shamsuddin, Mustaffa (2015) Preparation of high activity Ga and Cu doped ZnS by hydrothermal method for hydrogen production under visible light irradiation. Journal of Nanomaterials, 2015 . ISSN 1687-4110

Che Yunus, Mohd. Azizi and Zhari, Salman and Haron, Saharudin and Arsad, Nur Husnina and Idham, Zuhaili and Ruslan, Muhammad Syafiq Hazwan (2015) Extraction and identification of vitamin E from Pithecellobium Jiringan seeds using supercritical carbon dioxide. Jurnal Teknologi, 74 (7). pp. 29-33. ISSN 2180-3722

A, Zuraida and Khalid, A. A. and Ismail, A. F. (2007) Performance of hybrid filament wound composite tubes subjected to quasi static indentation. Materials and Design, 28 . pp. 71-77.

A-Jalil, S. and Hashim, Haslenda and Hassim, Mimi Haryani and Johari, Anwar (2012) Fugitive emission reduction through optimization. Computer Aided Chemical Engineering, 31 . pp. 485-489. ISSN 1570-7946

A., Bahadori and G., Zahedi and S., Zendehboudi (2012) A novel analytical method predicts plug boundaries of bingham plastic fluids for laminar flow through annulus. Canadian Journal of Chemical Engineering . ISSN 0008-4034

A., Rohana and A. M., Fadzilah Adibah and M. S., Muhammad Roji (2011) Oleate induces apoptosis in 3T3-L1 adipocytes. Proceedings of World Academy of Science, Engineering and Technology, 81 ( ). 001-004. ISSN 2010-376X

A. A. Bazmi, (2011) Progress and challenges in utilization of palm oil biomass as fuel for decentralized electricity generation. Renewable and Sustainable Energy Reviews, 15 (1). pp. 574-583. ISSN 1364-0321

A. Hamid, A. and W. Yusof, W. M. and M. Illias, R. and Nadarajah, K. (2001) Pengasingan Strain Baru Kulat Dari Tanah Di Malaysia Untuk Penghasilan Asid γ-Linolenik (GLA). Jurnal Teknologi C (34C). pp. 1-8. ISSN 0127-9696

A. Jalil, Aishah and Triwahyono, Sugeng and Adam, S. Hazirah and Rahim, N. Diana and A. Aziz, M. Arif and H. Hairom, N. Hanis and M. Razali, N. Aini and A. Z. Abidin, Mahani and A. Mohamadiah, M. Khairul (2010) Adsorption of methyl orange from aqueous solution onto calcined Lapindo volcanic mud. Journal of Hazardous Materials, 181 (1-3). pp. 755-762. ISSN 0304-3894

A. Jalil, Aishah and Triwahyono, Sugeng and M. Razali, N. Aini and H. Hairom, N. Hanis and Idris, Ani and M. Muhid, M. Nazlan and Ismail, Azlyana and M. Yahaya, N. Aisyah and L. Ahmad, N. Akma and Dzinun, Hazlini (2010) Complete electrochemical dechlorination of chlorobenzenes in the presence of various arene mediators. Journal of Hazardous Materials, 174 (1-3). pp. 581-585. ISSN 0304-3894

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Mohd Illias, Rosli and Hassan, Osman (2007) Fouling characteristics and autopsy of a PES ultrafiltration membrane in cyclodextrins separation. Desalination, 207 (1-3). pp. 227-242. ISSN 0011-9164

A. Manan, Muhammad and Ismail, Issham (1997) Pengurusan makmal berkualiti bagi makmal amali pelajar: pengalaman makmal pengujian petroleum, UTM. Seminar Kebangsaan Teknologi Makmal .

A. N. Mustapa, (2011) Extraction of ß- carotene from palm oil mesocarp using sub-critical r134a. Food Chemistry, 125 (1). pp. 262-267. ISSN 0308-8146

A. Rahman, M. and Ismail, A. F. and Mustafa, A. (2007) The effect of residence time on the physical characteristics of PAN-based fibers produced using a solvent-free coagulation process. Materials science and engineering A, 448 . pp. 275-280. ISSN 0921-5093

A. Rahman, W. A. W. and Adenan, N. and Ali, R. Rasit and Sulaiman, H. (2009) Effect of silane crosslinker on the thermal properties of rice straw/HDPE biocomposite. Journal of Applied Sciences, 9 (17). pp. 3041-3047. ISSN 18125654

A.W. Zularisam, (2011) Role of rural organic matter (NOM), colloidal particles and solution chemistry on ultrafiltration performance. Separation and Purification Technology, 78 . pp. 189-200. ISSN 1383-5866

Ab. Muis, Zarina and Hashim, Haslenda and Abd. Manan, Zainuddin and Douglas, P. L. (2011) Effect of fossil fuel price fluctuations on electricity planning comprising renewable energy. Asia-Pacific Journal of Chemical Engineering, 6 . pp. 552-562. ISSN 1932-2143

Abang Zaidel, Dayang Norulfairuz and Chin, Nyuk L. J. and Yusof, Yushaizad A. M. and Abdul Rahman, R. N. Z. A. (2009) Analysis and correlation studies on gluten quantity and quality during production. Journal of Applied Sciences , 9 (9). pp. 1686-1694. ISSN 1812-5654

Abang Zaidel, Dayang Norulfairuz and Zainudin, Nurul Nadia and Mohd. Jusoh, Yanti Maslina and Muhamad, Ida Idayu (2015) Extraction and characterisation of pectin from sweet potato (ipomoea batatas) pulp. Journal of Engineering Science and Technology, 10 (3). pp. 22-29. ISSN 1823-4690

Abba, A. H. and Rashid, M. and Hasfalina, C. M. and Noor, Zainura Zainon and Whei, T. B. (2010) Quantification of chlorine and hydrogen chloride in air using chemically treated filter. The IUP Journal of Environmental Sciences, 4 (4). pp. 65-80. ISSN 0973-9912

Abd Rahman, (2012) Profile of parkia speciosa hassk metabolites extracted with sfe using FTIR- PCA method. Journal Of The Chinese Chemical Society, 59 (4). pp. 507-514. ISSN 0009-4536

Abd. Aziz, Azila (2009) Mathematical modeling of an amperometric glucose sensor: the effect of membrane permeability and selectivity on performance. Jurnal Teknologi (Kejuruteraan) (51F). pp. 77-94. ISSN 0127-9696

Abd. Aziz, Azila (2009) Quantitative analysis of performance of a hydrogen peroxide-based glucose biosensor. Jurnal Teknologi (Kejuruteraan) (51F). pp. 96-106. ISSN 0127-9696

Abd. Aziz, Azila (2009) Systematic selection of material for an amperometric glucose biosensor. Jurnal Teknologi F (51F). pp. 107-120. ISSN 0127-9696

Abd. Aziz, Mustafa Kamal and Foo, Dominic C. Y. and Tan, Raymond R. and Lam, Hon Loong and Kleme, Jirí J. (2011) Synthesis of flexible palm oil-based regional energy supply chain. Computer Aided Chemical Engineering, 29 . pp. 2014-2018. ISSN 15707946

Abd. Aziz, Suriani and Fernandez, Christine Cheryl and Salleh, Madihah Md. and Illias, Rosli Md. and Hassan, Mohd. Ali (2008) Effect of agitation and aeration rates on chitinase production using Trichoderma virens UKM1 in 2-l stirred tank reactor. Applied Biochemistry and Biotechnology, 150 (2). pp. 1-12. ISSN 0273-2289 (Print) 1599-0291 (Online)

Abd. Halim, Noor Dayana and Bilal Ali, Mohamad and Yahaya, Noraffandy (2012) Development of chemical bond website for field dependent and field independent learners. International Journal of e-Education, e-Business, e-Management and e-Learning, 2 (1). pp. 19-21. ISSN 2010-3654

Abd. Hamid, Mohd. Kamaruddin and Gani, Rafiqul (2007) Integration of modeling, design and control for efficient operation of chemical processes. Graduate Schools Yearbook 2007 . pp. 3-6.

Abd. Kadir, Abd. Aziz and Hassan, Zulkafli (1991) Pencirian minyak mentah berlilin melalui kajian fizikal dan hubungannya dengan masalah parafin. Jurnal Teknologi, 18 . pp. 55-63. ISSN 2180-3722

Abd. Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Ujang, Zaini (2005) A new look at urban water saving. Water21 .

Abd. Rahman, Roshanida and Md. Illias, Rosli and Mohd Ghazali, Mohd Nawawi and Ismail, Ahmad Fauzi and Hassan, Osman and Kamaruddin, Kamarulzaman (2004) Optimisation of growth medium for the production of cyclodextrin glucanotransferase from Bacillus stearothermophilus HR1 using response surface methodology. Process Biochemistry, 39 . pp. 2053-2060. ISSN 0032-9592

Abd. Razak, Razif (2001) Assessment of potential oil and gas exploration investments : management perspective. Jurnal Teknologi E (34E). pp. 25-38. ISSN 0127-9696

Abd. Razak, Saiful Izwan and Ahmad Sharif, Noor Fadzliana and Mat Nayan, Nadirul Hasraf and Muhamad, Ida Idayu and Yahya, Mohd. Yazid (2015) Impregnation of poly(lactic acid) on biologically pulped pineapple leaf fiber for packaging materials. Bioresources, 10 (3). pp. 4350-4359. ISSN 1930-2126

Abdel-Fattah, Y. R. and El-Enshasy, Hesham Ali and Soliman, Nadia A. and El-Gendi, Hebah (2009) Bioprocess development for production of alkaline protease by bacillus pseudofirmus Mn6 through statistical experimental designs. Journal of Microbiology and Biotechnology, 19 (4). pp. 378-386. ISSN 10177825

Abdui Majid, Zulkifli (1991) The reasons and problems for the renewed interest in natural gas and liquefied natural gas (LNG) world wide during the late 1980s and early 1990s. Jurnal Teknologi, 18 . pp. 43-53. ISSN 2180-3722

Abdul Awal A.S.M., (2011) Effect of palm oil fuel ash in controlling heat of hydration of concrete. Procedia Engineering, 14 . pp. 2650-2657. ISSN 1877-7058

Abdul Aziz, Azila and Jusoh, Norhana and Ashari, Mohd. Azizul and Hassan, Norhasliza (2010) Immobilization of glucose oxidase in freeze - thawed PVa and PVa/TMOS membranes. Jurnal Teknologi, 52 . pp. 181-192. ISSN 0127-9696 (Print); 2180-3722 (Electronic)

Abdul Gaffar, R. and Sazali, N. E. S. and Abdul Majidi, F. A. (2008) Colour reduction and anti-microbial evaluation of pre-treated cashew leaves extract. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp ed.). pp. 1-9. ISSN 1823-5255

Abdul Jalil, Aishah and M. A., Hartini and S., Normala and A. M., Norhuda and M. H., N. Hanis and H. M., Razif and T., Sugeng (2007) Carbon dioxide fixation method for electrosynthesis of benzoic acid from chlorobenzene. Journal of Natural Gas Chemistry, 16 (3). pp. 273-277. ISSN 1003-9953

Abdul Jalil, Aishah and Triwahyono, Sungeng and Hattori, Hideshi (2007) Study of hydrogen adsorption on Pt/WO3-ZrO2 through Pt sites. Journal of Natural Gas Chemistry , 16 (3). pp. 252-257. ISSN 1003-9953

Abdul Jalil, Aishah and Nobuhito, K. and Tokuda, M. (2004) Synthesis of precursor of anti-inflammatory agents by using highly reactive zinc. Medical Journal of Malaysia , 59 . pp. 210-211. ISSN 03005283 (Submitted)

Abdul Jalil, Aishah and Triwahyono, Sugeng and Karim, Abdellah H. and Nordin, Norazzizi K. and Asli, Umi Aishah and Hassim, Mimi Haryani and Prasetyoko, Didik (2015) Grape-like mesostructured silica nanoparticle-decorated single-walled carbon nanotubes: silica growth and dye adsorptivity. RSC Advances, 5 (88). pp. 71796-71804. ISSN 2046-2069

Abdul Kadir, Abdul Aziz and Ismail, Issham (1997) Determination of crystallization of waxy crude and the influence of diluents. Proceedings of Regional Symposium on Chemical Engineering 1997 (2). pp. 316-325.

Abdul Kadir, Abdul Aziz and Ismail, Issham and Hamid, Mohd. Fauzi (1998) The formation of paraffin wax crystal in flow. Proceedings of International Conference on Mixing and Crystallization .

Abdul Kadir, Abdul Aziz and Ismail, Issham and Sengodan, Papathy (1999) Managing paraffin wax deposition in oilwell. Proceeds of World Engineering Congress .

Abdul Khalil, H. P. S. and Firoozian, P. and Jawaid, M. and Akil, H. M. and Hassan, Azman (2012) Preparation of activated carbon filled epoxy nanocomposites. Journal of Thermal Analysis and Calorimetry, 113 (2). pp. 623-631. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Abdul Latif, Fazilah and Salim, Norizah (1993) Kegunaan antikoagulan hirudin dari lintah dalam perubatan. Jurnal Teknologi, 21 . pp. 78-81. ISSN 2180-3722

Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Suptiyano, Bambang and Said, Mazlan (2008) Viability study of ethylene (C2H4) as an alternative fuel for gasoline engine. Jurnal Mekanikal (26). pp. 151-161. ISSN 0127-3396

Abdul Majid, Fadzilah Adibah and Abdul Gani, Madihah and Talib, Siti Zalita and Hasyim, Khadijah Khairillah (2008) Stability of bromelain-polyphenol complex in pineapple juice. Jurnal Teknologi F (49F). pp. 27-38. ISSN 0127-9696

Abdul Majid, Fadzilah Adibah and Taher, Muhammad and Sarmidi, Mohamad Roji (2007) The effect of cinnamtannin B1 on cell proliferation and glucose uptake of 3T3-L1 cells. Natural Product Communications, 2 (1). pp. 61-66. ISSN 1934-578X

Abdul Majid, Zulkifli and Yaacob, Zulkefli (2001) Alternative Piping Material For Malaysian Fuel Gas Distribution. Jurnal Teknologi F (35F). pp. 41-54. ISSN 0127-9696

Abdul Majid, Fadzilah Adibah and Shian, L. P. (2008) Evaluating pre-treatment methods in the isolation and purification of monoclonal IgG antibody. Journal of Chemical & Natural Resources Engineering, 2 (Sp.Ed.). pp. 1-10. ISSN 1823-5255

Abdul Majid, Z. and Mohsin, R. and Omar, F. (2008) Water jetting impact on natural gas pipeline. Journal of Chemical & Natural Resources Engineering, 2 . pp. 80-89. ISSN 1823-5255

Abdul Majid, Zulkifli and Mohsin, Rahmat (2012) Failure investigation of natural gas pipeline. Arabian Journal for Science and Engineering, 37 (4). pp. 1083-1088. ISSN 1319-8025

Abdul Majid, Fadzilah Adibah and M, Butler and M, Al-Rubeai (2006) Glycosylation of an Immunoglobulin Produced From a Murine Hybridoma Cell Line: The Effect of Culture Mode and the Anti-Apoptotic Gene, bcl-2. Glycosylation of an Immunoglobulin Produced From a Murine Hybridoma Cell Line: The Effect of Culture Mode and the Anti-Apoptotic Gene, bcl-2, Biotechnology and Bioengineering, Vol. 97, No. 1, May 1, 2007 . pp. 1-14.

Abdul Manan, Zainuddin and Tan, Raymond R. and Dominic C., Y. Foo (2007) Assessing the sensitivity of water networks to noisy mass loads using Monte Carlo simulation. Computers & Chemical Engineering, 31 (10). pp. 1355-1363. ISSN 0098-1354

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2007) Water pinch analysis evolution towards a holistic approach for water minimization. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 544-553. ISSN 1547-5905

Abdul Manan, Zainuddin and Yin, Ling Tan and Dominic Chwan, Yee Foo and Swee, Yin Tea (2007) Application of the water cascade analysis technique for water minimisation in a paper mill plant. International Journal of Environment and Polution, 29 (1-3). pp. 90-103. ISSN 0957-4352

Abdul Manan, Zainuddin and Lim, Fang Yee (2004) Maximizing utility savings through appropriate implementation of combined heat and power scheme. Jurnal Teknologi A (41A). pp. 53-62. ISSN 0127-9696

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2006) Stretching the limits on urban and indsutrial water savings. Jurutera . pp. 24-27.

Abdul Manan, Zainudin (2006) A waste minimization approach for process design to promote opportunistic recycling. Chemical Technology . pp. 5-6. ISSN 1609-3240

Abdul Manan, Zainuddin and Foo, C. Y. (2003) Assessing options for process changes via water cascade analysis. Journal of the Institute of Materials Malaysia . pp. 21-32.

Abdul Manan, Zainuddin (2006) Consider the bigger picture during energy audit to maximise energy savings. Jurutera (03). pp. 16-24. ISSN 0126-9909

Abdul Manan, Zainuddin (2004) Maximizing energy efficiency and minimizing environmental emissions in the process industry using thermal pinch analysis. ASEAN Journal of Chemical Engineering (AJChE), 4 (2). pp. 32-39. ISSN 1655-4418

Abdul Manan, Zainuddin and Foo, Sheek Hian (2000) Combining pinch and energy analysis for process improvement - a case study on an aromatics complex. Jurnal Teknologi F (33F). pp. 9-16. ISSN 0127-9696

Abdul Manan, Zainuddin and Hashim, Haslenda and Mansor, Shuhaimi (2000) Exergo-economic analysis of a batch chemical plant. Jurnal Teknologi F (32F). pp. 1-14. ISSN 0127-9696

Abdul Manan, Zainuddin and René, Bañares-Alcántara (2006) A Waste Minimization Approach for Process Design to Promote Opportunistic Recycling (Dept. of Chem Eng). Chemical Technology . pp. 5-7.

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Samingin, Mohd Hisham and Misran , Norrazi (2006) Assess your plant’s true water-savings potential. Chemical Engineering, 113 (13). pp. 42-49.

Abdul Manan, Zainuddin and Ying, Ronald Chieh Ling (2003) A system design approach for overcoming heat exchanger fouling bottlenecks - a study on a refinery preheat train. Jurnal Jurutera Kimia Malaysia, 3 . pp. 21-32. ISSN 1675-8307

Abdul Rahim Yacob, (2013) Detection of hippuric acid: a glue solvent metabolite, using a mobile test kit. Arabian Journal of Chemistry, 6 (1). pp. 115-120. ISSN 1878-5352

Abdul Rahim Yacob, (2013) One-step air pyrolysis of date palm tree waste; physical and morphological study. Journal of Biobased Materials and Bioenergy, 7 (2). pp. 223-228. ISSN 1556-6560

Abdul Razak, Rahmat and Rahman, Wahab A. and Sin, Lee Tin and Yussuf, Abdirahman A. (2009) Approaches to improve compatibility of starch filled polymer system : a review. Materials Science and Engineering C , 29 (8). pp. 2370-2377. ISSN 09284931

Abdul Razak Rahmat, (2014) Bio-based thermoset nanocomposite derived from vegetable oil: a short review. Reviews in Chemical Engineering, 30 (2). pp. 167-182. ISSN 0167-8299

Abdul Razak Rahmat, (2013) Comparison of injection molding processability of polylactic acid and high density polyethylene via computational approach. Journal of Polymer Engineering, 33 (2). pp. 121-132. ISSN 0334-6447

Abdul Razak Rahmat, (2014) Control of bacteria growth on ready-to-eat beef loaves by antimicrobial plastic packaging incorporated with garlic oil. Food Control, 39 (1). pp. 214-221. ISSN 0956-7135

Abdul Razak Rahmat, (2014) Effect of epoxidation level in silica filled epoxidized natural rubber compound on cure, rheological, mechanical and dynamic properties. Applied Mechanics and Materials, 554 . pp. 71-75. ISSN 1660-9336

Abdul Razak Rahmat, (2014) Effectiveness of trimethylopropane trimethacrylate for the electron-beam-irradiation-induced cross-linking of polylactic acid. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 319 . pp. 62-70. ISSN 0168-583X

Abdul Razak Rahmat, (2014) Effects of allium sativum essence oil as antimicrobial agent for food packaging plastic film. Innovative Food Science and Emerging Technologies, 26 . pp. 406-414. ISSN 1466-8564

Abdul Razak Rahmat, (2014) Effects of electron beam irradiation on mechanical properties and nanostructural-morphology of montmorillonite added polyvinyl alcohol composite. Composites Part B: Engineering, 63 . pp. 141-153. ISSN 1359-8368

Abdul Razak Rahmat, (2014) Effects of electron beam irradiation on the structural properties of polylactic acid/polyethylene blends. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 334 . pp. 18-27. ISSN 0168-583X

Abdul Razak Rahmat, (2014) Evaluation performance of multiple plasticizer systems on the physicomechanical, crystallinity and thermogravimetry of polyvinyl chloride. Journal of Polymer Engineering, 34 (6). pp. 521-529. ISSN 0334-6447

Abdul Razak Rahmat, (2014) Mechanical properties of vinyl ester resin/ epoxidized plam oil/ nanoclay composite. Applied Mechanics and Materials, 554 . pp. 165-169. ISSN 1660-9336

Abdul Razak Rahmat, (2014) Novel bio-based resins from blends of functionalised palm oil and unsaturated polyester resin. Materials Research Innovations, 18 . S6326-S6330. ISSN 1432-8917

Abdul-Malek Z., (2011) Influence of nanonasilica filler content in LDPE composites on partial discharge characteristics. Gaodianya Jishu/High Voltage Engineering, 37 (11). pp. 2629-2635. ISSN 1003-6520

Abdullah, Mohammad Sharir and Hasbullah, Hasrinah and Ibrahim, Norzana and Abd. Hamid, Kamaruddin (2007) Simulation and optimization of a butane autothermal reformer for fuel cell. Journal of Chemical and Natural Resources Engineering, 2 . pp. 1-13. ISSN 1823-5255

Abidin, Z.R.Z. and Ismail , A.F. and Aziz, M. and Sanip, S.M. and Buang, N. (2003) Pre-Treatment Of Natural Graphite As Starting Material For Carbon Nanotube Synthesis. Proceedings of Advances in Malaysian Fuel Cell Research and Development .

Abouzari-lotf, Ebrahim Abouzari and Nasef, Mohamed Mahmoud and Hossein, Ghassemi and Zakeri, Masoumeh and Abdollahi, Yadollah (2015) Improved methanol barrier property of Nafion hybrid membrane by incorporating nanofibrous interlayer self-immobilized with high level of phosphotungstic acid. ACS Applied Materials and Interfaces, 7 (31). pp. 17008-17015. ISSN 1944-8244

Abron K., (2011) A study on thermal and electrical properties of high density polyethylene/high density polyethylene grafted maleic anhydride/montmorillonite/polypyrrole blend. Scientific Research and Essays, 6 (30). pp. 6285-6292. ISSN 1992-2248

Abu Bakar, Aznizam and Hassan, Azman (2003) Impact properties of oil palm empty fruit bunch filled impact modified unplasticised poly (vinyl chloride) composites. Jurnal Teknologi Siri Khas A (39A). pp. 73-82. ISSN 0127-9696

Abu Bakar, Aznizam and Hassan, Azman and Fuah, Ahmad (2007) Effect of OPEFB on mechanical properties and processibility of CPE-IMPACT PVC-U composite. Journal of Industrial Technology, 16 (1). pp. 13-23. ISSN 0882-6404

Abu Bakar, Nooh and Boon, O. K. and Arumugam, V. and Safa, M. S. (2007) HRM and TQM : association with job involvement. Personnel Review, 36 (5-6). pp. 939-962. ISSN 0048-3486

Abu Bakar, Nooh and Ooi, K. B. and Arumugam, V. and Vellapan, L. and Loke, A. K. Y. (2007) Does TQM influence employees' job satisfaction? an empirical case analysis. International Journal of Quality and Reliability Management, 24 (1). pp. 62-77. ISSN 0265-671X

Abu Bakar, A. and Subre, A. (2008) Optimized conditions for grafting reaction of poly (methyl methacrylate) onto talc filler. Journal of Chemical and Natural Resources Engineering, 2 . pp. 72-79. ISSN 1823-5255

Abu Bakar, Anizam and Hassan, Azman and Mohd. Yusof, A. F. (2004) Thermal degradation of oil palm empty fruit bunch - filled PVC-U composites : effect of EFB content and acrylic impad modifer. Journal Institute of Malaysia (JIMM), 5 (2). pp. 3-19.

Abu Bakar, Anizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2007) Effect of OPEFB on mechanical properties and processibility of CPE–impact modified PVC–U composites. Journal of Industrial Technology, 16 (1). pp. 13-23. ISSN 0128-4940

Abu Bakar, Aznizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2006) The effect of oil extraction of the oil palm empty fruit bunch on the processability, impact, and flexural properties of PVC-U composites. International Journal of Polymeric Materials , 55 (9). pp. 627-641. ISSN 0091-4037

Abu Hassan, Mohd. Ariffin and Lim, Soo Hui and Noor, Zainura Zainon (2009) Removal of boron from industrial wastewater by chitosan via chemical precipitation. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 1-11. ISSN 1823-5255

Abu Hassan, Mohd. Ariffin and Tan, Pei Li and Noor, Zainura Zainon (2009) Coagulation and flocculation treatment of wastewater in textile industry using chitosan. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 43-53. ISSN 1823-5255

Abu Hassan, Shukur (1998) Kaedah-kaedah proses pembuatan menghasilkan produk berasaskan bahan rencam (komposit) plastik bertetulangkan gentian kaca (GFRP). Jurnal Mekanikal, 1 (5). pp. 31-47. ISSN 0127-3396

Abu Hassan , Mohd. Ariffin and Mantzavinos, Dionissios and Metcalfe, Ian S. (2007) Ultrasonic irradiaton of the removal of linear alkylbenzena sulphonates (LAS) from wastewater. Jurnal Teknologi , 46 (F). pp. 27-40. ISSN 0217-9696 (Print); 2180-3722 (Electronics)

Abu Samah, Rozaimi and Nik Mahmood, Nik Azmi and Goh, Kian Mau and Hassan, Osman and Md Illias, Rosli (2008) Production of thermostable pullulanase from Bacillus flavothermus KWF-1: medium development using experimental design with data transformation. Jurnal Teknologi (49F). pp. 383-396. ISSN 0127-9696

Adelnia, Hossein and Bidsorkhi, Hossein Cheraghi and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2015) Gas permeability and permselectivity properties of ethylene vinyl acetate/sepiolite mixed matrix membranes. Separation and Purification Technology, 146 . pp. 351-357. ISSN 1383-5866

Adham, (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 57-64. ISSN 0094-243X

Adrus, Nadia and Ayuba, Nur Farizah and Ulbricht, Mathias (2014) Poly (N-Isopropylacrylamide) hydrogel networks and sieving characteristics. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 7-10. ISSN 0127-9696

Adrus, Nadia and Ulbricht, Mathias (2012) Molecularly imprinted stimuli-responsive hydrogels for protein recognition. Polymer (United Kingdom), 53 (20). pp. 4359-4366. ISSN 0032-3861

Agus Arsad, (2013) Flow characteristics and dynamic behavior of polyamide 6/acrylonitile butadiene styrene (pa6/abs) blends. International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (4). pp. 209-214. ISSN 0091-4037

Agus Arsad, (2014) Influence of compatibilizer on mechanical properties of polylactic acid/natural rubber blends. Applied Mechanics and Materials, 554 . pp. 81-85. ISSN 1660-9336

Agus Arsad, (2014) Influence of different ultrasonic wave on polymerization of polyaniline nanofiber. Applied Mechanics and Materials, 618 . pp. 50-54. ISSN 1660-9336

Agus Arshad, (2014) Coagulation-flocculation in water treatment using calotropis procera leaves: a case study of river in Kaduna, Nigeria. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 5-9. ISSN 2180-3722

Agus Arshad, (2013) Effect of mmt concentrations as reinforcement on the properties of recycled PET/HDPE nanocomposites. Journal of Polymer Engineering, 33 (7). pp. 615-623. ISSN 0334-6447

Agus Arshad, (2014) Enhanced mechanical and thermal properties of CNT/HDPE nanocomposite using MMT as secondary filler. Times of Polymers (TOP) and Composites 2014, 1599 . pp. 206-209. ISSN 1551-7616

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2003) Pengaruh nombor pusar ke atas pengurangan emisi NOx dari pembakar berbahan api cecair menggunakan pemusar udara aliran paksi. Jurnal Mekanikal (16). pp. 79-90. ISSN 0127-3396

Ahmad, A. and L., W. Piang (2008) Estimation of fatty acid composition using PLS based model. Journal of Chemical & Natural Resources Engineering, 2 . pp. 59-71. ISSN 1823-5255

Ahmad, Akil M. and Mohd. Setapar, Siti Hamidah and Chuong, Chuo Sing and Khatoon, Asma and Wani, Waseem A. and Kumar, Rajeev and Rafatullah, Mohd. (2015) Recent advances in new generation dye removal technologies: novel search for approaches to reprocess wastewater. RSC Advances, 5 (39). pp. 30801-30818. ISSN 2046-2069

Ahmad, Syaza I. and Hashim, Haslenda and Hassim, Mimi H. and Srinivasan, R. (2013) Safety assessment curve (SAC) for inherent safety assessment in petrochemical industry. Chemical Engineering Transactions, 35 . pp. 1267-1272. ISSN 1974-9791

Ahmad, Wan Azlina and Zakaria, Zainul Akmar and Razali, Firdausi and Samin, Jefri (2009) Evaluation of the combined Cr(VI) removal capacity of sawdust and sawdust-immobilized acinetobacter haemolyticus supplied with brown sugar. Water, Air, and Soil Pollution, 204 (1-4). pp. 195-203. ISSN 0049-6979

Ahmad Fauzi Ismail, (2013) Antifouling and performance enhancement of polysulfone ultrafiltration membranes using CAVO3 nanoparticles. Desalination, 322 . pp. 69-75. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Beta-cyclodextrin functionalized MWCNT: a potential nano-membrane material for mixed matrix gas separation membranes development. Separation and Purification Technology, 115 . pp. 39-50. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Carbon dioxide stripping from water through porous polysulfone hollow fiber membrane contactor. Separation and Purification Technology, 108 . pp. 119-123. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Characterization of PVDF hollow fiber membrane for CO2 stripping by atomic force microscopy analysis. Separation and Purification Technology, 109 . pp. 98-106. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Effect of fiber packing density on physical CO2 absorption performance in gas-liquid membrane contactor. Separation and Purification Technology, 115 . pp. 152-157. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Effect of operating temperature on the behavior of promising SPEEK/CSMM electrolyte membrane for DMFCS. Separation and Purification Technology, 106 . pp. 72-81. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Effect of SMM concentration on morphology and performance of surface modified PVDF hollow fiber membrane contactor for CO2 absorption. Separation and Purification Technology, 116 . pp. 67-72. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Effect of stabilization condition on PEI/PVP-based carbon hollow fiber membranes properties. Separation Science and Technology, 48 (7). pp. 1030-1039. ISSN 0149-6395

Ahmad Fauzi Ismail, (2013) Enhanced hydrophilicity and salt rejection study of graphene oxide-polysulfone mixed matrix membrane. Desalination, 313 . pp. 199-207. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Mathematical modeling of nanofiltration for concentrated electrolyte solutions. Desalination, 320 . pp. 17-23. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Modification of psf/piam membrane for improved desalination applications using chitosan coagulation media. Desalination, 317 . pp. 108-115. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Performance improvement of polysulfone ultrafiltration membrane using n-succinyl chitosan as additive. Desalination, 318 . pp. 1-8. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Permeation, antifouling and desalination performance of tio2 nanotube incorporated psf/cs blend membranes. Desalination, 316 . pp. 76-84. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Polysulfone-chitosan blend ultrafiltration membranes: preparation, characterization, permeation and antifouling properties. RSC Advances, 3 (21). pp. 7855-7861. ISSN 2046-2069

Ahmad Fauzi Ismail, (2013) Preparation and characterization of electro-spun nanofiber membranes and their possible applications in water treatment. Separation and Purification Technology, 102 . pp. 118-135. ISSN 1383-5866

Ahmad Fauzi Ismail, (2013) Preparation and characterization of ppees/chitosan composite nanofiltration membrane. Desalination, 315 . pp. 135-141. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Preparation and performance evaluation of poly (amide-imide) and tio2 nanoparticles impregnated polysulfone nanofiltration membranes in the removal of humic substances. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 418 . pp. 92-104. ISSN 0927-7757

Ahmad Fauzi Ismail, (2013) Simultaneous wastewater treatment and electricity generation by microbial fuel cell: performance comparison and cost investigation of using nafion 117 and speek as separators. Desalination, 325 . pp. 1-6. ISSN 0011-9164

Ahmad Fauzi Ismail, (2013) Studies on copper coated polysulfone/modified poly isobutylene alt-maleic anhydride blend membrane and its antibiofouling property. Desalination, 308 . pp. 82-88. ISSN 0011-9164

Ahmad Khairuddin, N. B. and Wahab, H. A. and Samian, M. R. and Najimudin, N. (2008) Structure prediction on large protein using the combination of knowledge based and physics based approaches method validation on cholesterol esterase. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp ed.). pp. 141-154. ISSN 1823-5255

Ahmad Khairudin, N. B. and Wahab, H. A. and Samian, M. R. and Najimudin, N. (2008) The effects of gas phase on the protein conformation a molecular dynamics study on Eotaxin-3 Cytokine. Journal of Chemical and Natural Resources Engineering - Modeling Innovation, 2 (Sp ed.). pp. 18-28. ISSN 1823-5255

Ahmad Mutamim, Noor Sabrina and Zainon Noor, Zainura and Abu Hassan, Mohd. Ariffin and Olsson, Gustaf (2012) Application of membrane bioreactor technology in treating high strength industrial wastewater: a performance review. Desalination, 305 . pp. 1-11. ISSN 0011-9164

Ahmad U.K., (2012) Analysis of household water-based paints for forensic purposes [analiza porównawcza próbek farb stosowanych w gospodarstwach domowych]. Z Zagadnien Nauk Sadowych, 91 . pp. 185-194. ISSN 1230-7483

Ahmed, M. Murtala and Nasri, Noor Shawal and Hamza, D. Usman (2012) Biomass as a renewable source of chemicals for industrial applications. International Journal of Engineering Science and Technology (IJEST), 4 (2). pp. 721-730. ISSN 0975-5462

Ahmed, Mohammed Adham and Mohd-Ghazali, Normah and M. Saleh, Mikdam and Ahmad, Robiah (2013) Triple tube ammonia evaporator design for domestic absorption refrigerators. Heat Transfer Research, 44 (7). pp. 665-686. ISSN 1064-2285

Ahmed Iqbal, (2012) Performance of microwave synthesized dual solvent dope solution and lithium bromide adiitives on poly (ethersulfone) membranes. Journal of Chemical Technology and Biotechnology, 87 . pp. 177-188. ISSN 0268-2575

Ahmed Muherei, Mazen and Junin, Radzuan (2008) Mixing effect of anionic and nonionic surfactants on micellization, adsorption and partitioning of nonionic surfactant. Modern applied science, 2 (3).

Ahmed Muherei, Mazen and Junin, Radzuan (2009) Equilibrium adsorption isotherms of anionic, nonionic surfactants and their mixtures to shale and sandstone. Modern Applied Science, 3 (2). pp. 158-167. ISSN 1913-1844 (Print); 1913-1852 (Electronic)

AI-Amin, Abul Quasem and Alam, Gazi Mahabubul Ahabubul and Fei, Yapsu and Azam, Mohammad Nurul Urul and Karim, Yousif Osman (2015) Price and trade mechanism for palm and soybean oils: a comparative analysis of economic development between Asia and contemporary world. Asian Journal of Agricultural Research, 9 (1). pp. 1-11. ISSN 1819-1894

Aishah Abdul Jalil, (2013) Cost-effective microwave rapid synthesis of zeolite NAA for removal of methylene blue. Chemical Engineering Journal, 229 . pp. 388-398. ISSN 1385-8947

Aishah Abdul Jalil, (2014) Cumene cracking over chromium oxide zirconia: effect of chromium(VI) oxide precursors. Applied Catalysis A: General, 475 . pp. 487-496. ISSN 0926-860X

Aishah Abdul Jalil, (2013) Electrochemical strategy for grown zno nanoparticles deposited onto hy zeolite with enhanced photodecolorization of methylene blue: effect of the formation of si-o-zn bonds. Applied Catalysis A: General, 456 . pp. 144-158. ISSN 0926-860X

Aishah Abdul Jalil, (2013) Formation of acidic bronsted (moox)(-)(h-y)(+) evidenced by xrd and 2,6-lutidine FTIR spectroscopy for cumene cracking. Applied Catalysis A: General, 459 . pp. 8-16. ISSN 0926-860X

Aishah Abdul Jalil, (2014) Highly active Ni-promoted mesostructured silica nanoparticles for CO2 methanation. Applied Catalysis B: Environmental, 147 . pp. 359-368. ISSN 0926-3373

Aishah Abdul Jalil, (2014) Influence of multi-walled carbon nanotubes on textural and adsorption characteristics of in situ synthesized mesostructured silica. Journal of Colloid and Interface Science, 421 . pp. 93-102. ISSN 0021-9797

Aishah Abdul Jalil, (2013) Ir/pt-hzsm5 for n-pentane isomerization: effect of si/al ratio and reaction optimization by response surface methodology. Chemical Engineering Journal, 217 . pp. 300-309. ISSN 1385-8947

Aishah Abdul Jalil, (2013) One-pot electro-synthesis of zro2-zno/hy nanocomposite for photocatalytic decolorization of various dye-contaminants. Chemical Engineering Journal, 225 . pp. 254-265. ISSN 1385-8947

Aishah Abdul Jalil, (2013) Relating cumene hydrocracking activity to the acidic center of cro3-zro2. Journal of Molecular Catalysis A-Chemical, 377 . pp. 162-172. ISSN 1381-1169

Aishah Abdul Jalil, (2013) Sequential desilication-isomorphous substitution route to prepare mesostructured silica nanoparticles loaded with zno and their photocatalytic activity. Applied Catalysis A: General, 468 . pp. 276-287. ISSN 0926-860X

Aishah Abdul Jalil, (2013) Tailoring the current density to enhance photocatalytic activity of cuo/hy for decolorization of malachite green. Journal of Electroanalytical Chemistry, 701 . pp. 50-58. ISSN 1572-6657

Aishah Abdul Jalil, (2012) Utilization of bivalve shell-treated zea mays l. (Maize) husk leaf as a low-cost biosorbent for enhanced adsorption of malachite green. Bioresource Technology, 120 . pp. 218-224. ISSN 0960-8524

Akbari, Vahid and Borhani, Tohid Nejad Ghaffar and Aramesh, Roya and Abd. Hamid, Mohd. Kamaruddin and Shamiri, Ahmad and Hussain, Mohamed Azlan (2015) Evaluation of hydrodynamic behavior of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model. Computers and Chemical Engineering, 82 . pp. 344-361. ISSN 0098-1354

Akbari, Vahid and Borhani, Tohid Nejad Ghaffar and Shamiri, Ahmad and Mohd. Abd. Hamid, Kamaruddin (2015) A CFD-PBM coupled model of hydrodynamics and mixing/segregation in an industrial gas-phase polymerization reactor. Chemical Engineering Research and Design, 96 . pp. 103-120. ISSN 0263-8762

Akhtar, Javaid and Saidina Amin, Nor Aishah (2012) A review on operating parameters for optimum liquid oil yield in biomass pyrolysis. Renewable and Sustainable Energy Reviews, 16 (7). pp. 5101-5109. ISSN 1364-0321

Akhtar, Junaid and Teo, Chee Loong and Lai, Long Wee and Hassan, Nursia and Idris, Ani and Abd. Aziz, Ramlan (2015) Factors affecting delignification of oil palm empty fruit bunch by microwave-assisted dilute acid/alkali pretreatment. BioResources, 10 (1). pp. 588-596. ISSN 1930-2126

Al-Dulaimi, A. A. and Hashim, Shahrir (2012) Improving the anti-corrosion properties via surface modification for silicon dioxide by conductive polymer. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 113-118. ISSN 1823-0334

Ali, (2012) Characteristics of oils and nutrient contents of nigella sativa linn. and trigonella foenum-graecum seeds. Bulletin Of The Chemical Society Of Ethiopia, 26 (1). pp. 55-64. ISSN 1011-3924

Ali, (2012) Numerical prediction on the dispersion of pollutant particles. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 65-71. ISSN 0094-243X

Ali, Fattahi and Hamed, Akhondzadeh and Derahman, Mohd. Nawi and Yunan, Mat Hussin and Soheil, Namazi (2012) Impact of reservoir heterogeneity on steam assisted gravity drainage in heavy oil fractured reservoirs. Energy Exploration and Exploitation, 30 (4). pp. 553-566. ISSN 0144-5987

Ali, Roshafima Rasit and Rahman, W. A. W. A. and Kasmani, R. M. and Ibrahim, N. and Hasbullah, H. and Sadikin, A. N. (2014) Biofilm green packaging: characterization and biodegradation studies. Applied Mechanics and Materials, 606 . pp. 67-71. ISSN 1660-9336

Ali M.A., (2011) Comparative study of the characteristics of seed oil and seed nutrient content of three varieties of cucumis sativus l. Pakistan Journal of Scientific and Industrial Research, 54 (2). pp. 68-74. ISSN 0309-0885

Ali Mohsin, Muhammad E. and Arsad, Agus and Gulrez, Syed K. H. and Muhamad, Zurina and Fouad, Hassan and Alothman, Othman Y. (2015) Enhanced dispersion of carbon nanotubes in high density polyethylene matrix using secondary nanofiller and compatibilizer. Fibers and Polymers, 16 (1). pp. 129-137. ISSN 1229-9197

Alias, N. H. and Kamarudin, Khairul Sozana Nor and Bhatti, I. (2010) CO2 separation using modified MCM-41 in PSA system. International Journal of Chemical and Environmental Engineering, 1 (2). pp. 85-90. ISSN 2078-0737

Alizadeh, Abdolhamid and Khodaei, Mohammad M. and Kanjouri, Tayyebeh and Shamsuddin, Mustaffa (2015) Electro-generated ortho-quinoide intermediates: templates for feasible construction of a series of novel imidazo[2,1-b]thiazole derivatives through one-pot five-step domino hetero-annulation process. Research on Chemical Intermediates, 41 (9). pp. 6185-6197. ISSN 1568-5675

Alizadeh, Mostafa and Movahed, Zohreh and Junin, Radzuan and Mohsin, Rahmat and Alizadeh, Mehdi and Alizadeh, Mohsen (2015) Fracture modeling in oil and gas reservoirs using image logs data and petrel software. Jurnal Teknologi, 75 (11). pp. 25-32. ISSN 2180-3722

Altaee, Ali and Sharif, Adel and Zaragoza, Guillermo and Ismail, Ahmad Fauzi (2015) Evaluation of FO-RO and PRO-RO designs for power generation and seawater desalination using impaired water feeds. Desalination, 368 . pp. 27-35. ISSN 0011-9164

Amin, Nor Aishah Saidina and Istadi, Istadi (2006) Selective Conversion Of Methane To C2 Hydrocarbons Using Carbon Dioxide As An Oxidant Over Cao-Mno/Ceo2 Catalyst. Studies in Surface Science and Catalysis, 159 . pp. 213-216. ISSN 0167-2991 (Unpublished)

Amin, Norsarahaida and Tan, Eng Fong and Manan, Z. A. (2003) Selective reduction of NOx with C3H6 over Cu and Cr promoted CeO2 catalysts. Applied Catalysis B: Environmental , 43 (1). pp. 57-69. ISSN 0926-3373

Aminuddin Saat, (2013) Prediction of micro surface cooler performance for different rectangular type microchannels dimensions. International Journal of Heat and Fluid Flow, 44 . pp. 644-651. ISSN 0142-727X

Amiri, Morteza and Yunan, Mat Hussin and Zahedi, Gholamreza and Jaafar, Mohd. Zaidi (2012) Introducing new method to improve log derived saturation estimation in tight shaly sandstones-a case study from mesaverde tight gas reservoir. Journal of Petroleum Science and Engineering, 92-93 . pp. 132-142. ISSN 0920-4105

Andreas Ochsner, (2013) Experimental analysis on the thermal anisotropy of syntactic hollow sphere structures. Experimental Thermal and Fluid Science, 44 . pp. 637-641. ISSN 0894-1777

Ani, (2012) Microwave induced fast pyrolysis of scrap rubber tires. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 834-841. ISSN 0094-243X

Ani Idris, (2014) Discoloration of aqueous textile dyes solution by Phanerochaete chrysosporium immobilized in modified PVA matrix. Desalination and Water Treatment, 52 (34-36). pp. 6694-6702. ISSN 1944-3994

Ani Idris, (2013) Disruption of oil palm trunks and fronds by microwave-alkali pretreatment. Bioresources, 8 (2). pp. 2792-2804. ISSN 1930-2126

Ani Idris, (2014) Effect of different light wavelength on the growth of marine microalgae. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 97-100. ISSN 2180-3722

Ani Idris, (2014) Fabrication of polyvinylidene difluoride nano-hybrid dialysis membranes using functionalized multiwall carbon nanotube for polyethylene glycol (hydrophilic additive) retention. Journal of Industrial and Engineering Chemistry, 20 (5). pp. 3744-3753. ISSN 1226-086X

Ani Idris, (2012) Immobilized candida antartica lipase b: hydration, stripping off and application in ring opening polyester synthesis. Biotechnology Advances, 30 (3). pp. 550-563. ISSN 0734-9750

Ani Idris, (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering & Technology, 36 (10). pp. 1683-1690. ISSN 0930-7516

Ani Idris, (2014) Influence of multiwall carbon nanotube on polyethersulfone/ polyvinyl alcohol blend membranes. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 31-35. ISSN 0127-9696

Ani Idris, (2013) Intensity of blue led light: a potential stimulus for biomass and lipid content in fresh water microalgae chlorella vulgaris. Bioresource Technology, 148 . pp. 373-378. ISSN 0960-8524

Ani Idris, (2014) Microwave-alkali activation on the morphology and structure of bamboo activated carbon. Applied Mechanics and Materials, 575 . pp. 154-159. ISSN 1660-9336

Ani Idris, (2013) Morphology and thermal characteristics of polyamide/monosodium glutamate membranes. International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (6). pp. 345-350. ISSN 0091-4037

Ani Idris, (2014) Photo catalytic reduction of Pb(II) using titanium oxide PVA-Alginate beads under sunlight. Applied Mechanics and Materials, 606 . pp. 99-103. ISSN 1660-9336

Anwar Johari, (2014) Combustion characteristics of refuse derived fuel (RDF) in a fluidized bed combustor. Sains Malaysiana, 43 (1). pp. 103-109. ISSN 0126-6039

Anwar Johari, (2014) Combustion of municipal solid waste in a pilot scale fluidized bed combustor. Advanced Materials Research, 931-93 . pp. 1015-1019. ISSN 1022-6680

Anwar Johari, (2014) A decision support system (DSS) for sustainable production of biofuel. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 1103-1108. ISSN 1660-9336

Anwar Johari, (2014) Design of a bubbling fluidized bed gasifier for the thermochemical conversion of oil palm empty fruit bunch briquette. Applied Mechanics and Materials, 493 . pp. 3-8. ISSN 1660-9336

Anwar Johari, (2014) Effect of cellulose acetate phthalate (CAP) on characteristics and morphology of polysulfone/cellulose acetate phthalate (PSf/CAP) blend membranes. Applied Mechanics and Materials, 493 . pp. 640-644. ISSN 1660-9336

Anwar Johari, (2014) Life cycle assessment of palm oil biodiesel production in Malaysia. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 1080-1086. ISSN 1660-9336

Anwar Johari, (2014) Municipal solid waste management and potential revenue from recycling in Malaysia. Modern Applied Science, 8 (4). pp. 37-49. ISSN 1913-1844

Anwar Johari, (2014) A simplified model for gasification of oil palm empty fruit bunch briquettes. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 7-9. ISSN 2180-3722

Ariffin Samsuri, (2014) Does the maturity of Jatropha Curcas L. affect the quality and quantity of the yield of oil for biodiesel production? International Journal of Green Energy, 11 (2). pp. 193-205. ISSN 1543-5075

Arjmandi, Reza and Hassan, Azman and Eichhorn, Stephen J. and Mohamad Haafiz, M. K. and Zakaria, Zainoha and Tanjung, Faisal Amri (2015) Enhanced ductility and tensile properties of hybrid montmorillonite/cellulose nanowhiskers reinforced polylactic acid nanocomposites. Journal of Materials Science, 50 (8). pp. 3118-3130. ISSN 0022-2461

Arjmandi, Reza and Hassan, Azman and Majeed, Khaliq and Zakaria, Zainoha (2015) Rice husk filled polymer composites. International Journal of Polymer Science, 2015 . ISSN 1687-9422

Arshad Adam Salema, (2012) Microwave-assisted pyrolysis of oil palm shell biomass using an overhead stirrer. Journal of Analytical and Applied pyrolysis, 96 . pp. 162-172. ISSN 0165-2370

Arshad Ahmad, (2013) An optimisation approach for increasing the profit of a commercial VGO hydrocracking process. Canadian Journal of Chemical Engineering, 91 (6). pp. 1077-1091. ISSN 0008-4034

ASM Abdul Awal, (2013) Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash. Fuel, 105 . pp. 728-731. ISSN 0016-2361

Asnawi, S. and Abd. Aziz, A. and Abd. Aziz, R. and Khamis, A. K. (2008) Formulation of geranium oil loaded solid lipid nanoparticles for mosquito repellent application. Journal of Chemical & Natural Resources Engineering, 2 . pp. 90-99. ISSN 1823-5255

Asnawi, S. and Mohd. Zaki, Z. and Abdul Aziz, A. and Khamis, A. K. and Abdul Aziz, B. (2008) Evaluation of the potential of Pelargonium Radula extract in repelling Aedes Aegypti. Journal of Chemical & Natural Resources Engineering, 2 . pp. 11-19. ISSN 1823-5255

Athimulam, Arunasalam and Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2006) Modelling and optimization of Eurycoma longifolia water extract production. Food and Bioproducts Processing, 84 (2 C). pp. 139-149. ISSN 0960-3085

Awang, Mariyamni (2008) Sulfonation of phenols extracted from the pyrolysis oil of oil palm shells for enhanced oil recovery. ChemSusChem, 1 (3). pp. 210-214. ISSN 1864-5631

Awang, Mariyamni (1992) Parallel programming of a resevoir simulator. Jurnal Teknologi, 19 . pp. 1-13. ISSN 2180-3722

Awang, Noranizah and Ismail, Ahmad Fauzi and Jaafar, Juhana and Matsuura, Takeshi and Junoh, Hazlina and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. (2015) Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: a review. Reactive and Functional Polymers, 86 . pp. 248-258. ISSN 1381-5148

Azarpour, Abbas and Borhani, Tohid Nejad Ghaffar and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Behbehani, Mazyar Madooli (2015) Prediction of Pd/C catalyst deactivation rate and assessment of optimal operating conditions of industrial hydropurification process. Industrial & Engineering Chemistry Research, 54 (28). pp. 7067-7082. ISSN 0888-5885

Azarpour, Abbas and Zahedi, Gholamreza (2012) Hybrid dynamic modeling of 4-CBA hydrogenation fixed-bed catalytic reactor of PTA production plant. Computer Aided Chemical Engineering, 31 . pp. 1667-1671. ISSN 1570-7946

Azarpour, Abbas and Zahedi, Gholamreza (2012) Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation. Chemical Engineering Journal, 209 . pp. 180-193. ISSN 1385-8947

Azdarpour, Amin and Asadullah, Mohammad and Junin, Radzuan and Mohammadian, Erfan and Hamidi, Hossein and Mohamad Daud, Ahmad Rafizan and Manan, Muhammad (2015) Extraction of calcium from red gypsum for calcium carbonate production. Fuel Processing Technology, 130 . pp. 12-19. ISSN 0378-3820

Aziatul Niza Sadikin, (2014) Effect of pre-treatment of lignocellulosic fiber on mechanical properties of chitosan-filled filter media. Advanced Materials Research, 931-93 . pp. 210-214. ISSN 1022-6680

Aziatul Niza Sadikin, (2014) Optimization of water permeability of "green" non-woven filter media from lignocellulosic fibers using Taguchi method. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 45-49. ISSN 2180-3722

Aziatul Niza Sadikin, (2014) A simple and cost-Effective method for fabricating chitosan-filled filter media from lignocellulosic biomass. Applied Mechanics and Materials, 606 . pp. 61-65. ISSN 1660-9336

Azis, (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low reynolds number. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 49-56. ISSN 0094-243X

Azizul Azri Mustaffa, (2014) Development and analysis of the Original UNIFAC-CI model for prediction of vapor-liquid and solid-liquid equilibria. Fluid Phase Equilibria, 366 . pp. 24-44. ISSN 0378-3812

Azizul Azri Mustaffa, (2014) A review of flash point prediction models for flammable liquid mixtures. Industrial & Engineering Chemistry Research, 53 (32). pp. 12553-12565. ISSN 0888-5885

Azman, Hassan (2006) Impact properties of acrylate rubber-modified PVC: Influence of temperature. Journal of Materials Processing Technology, 172 (3). pp. 341-345. ISSN 0924-0136

Azman Hassan, (2014) Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites. Journal of Applied Polymer Science, 131 (15). ISSN 1097-4628

Azman Hassan, (2014) Characterization of polylactic acid/microcrystalline cellulose/montmorillonite hybrid composites | Pencirian komposit polilaktik asid/selulosa mikrohablur/ hibrid montmorilonit. Malaysian Journal of Analytical Sciences, 18 (3). pp. 642-650. ISSN 1394-2506

Azman Hassan, (2014) Dispersion and roles of montmorillonite on structural, flammability, thermal and mechanical behaviours of electron beam irradiated flame retarded nanocomposite. Composites Part B: Engineering, 61 . pp. 41-48. ISSN 1359-8368

Azman Hassan, (2014) Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of alkali treated kenaf fiber filled PLA biocomposites. Materials & Design, 54 . pp. 425-429. ISSN 0261-3069

Azman Hassan, (2014) Effect of PVA-co-MMA copolymer on the physical, mechanical, and thermal properties of tropical wood materials. Advances in Materials Science and Engineering . ISSN 1687-8434

Azman Hassan, (2014) Effect of reinforcement and chemical treatment of fiber on the properties of jute-coir fiber reinforced hybrid polypropylene composites. Fibers and Polymers, 15 (5). pp. 1023-1028. ISSN 1229-9197

Azman Hassan, (2013) The effect of tmptma addition on electron-beam irradiated ldpe, eva and blend properties. International Polymer Processing, 28 (4). pp. 386-392. ISSN 0930-777X

Azman Hassan, (2014) Effects of irradiation on the mechanical, electrical, and flammability properties of (low-density polyethylene)/(ethylene-[vinyl acetate] copolymer) blends containing alumina trihydrate. Journal of Vinyl and Additive Technology, 20 (2). pp. 91-98. ISSN 1548-0585

Azman Hassan, (2013) The effects of magnesium oxide on the thermal, morphological, and crystallinity properties of metallocene linear low-density polyethylene/rubbers composite. Journal of Polymer Engineering, 33 (3). pp. 229-238. ISSN 0334-6447

Azman Hassan, (2014) Effects of zinc borate loading on thermal stability, flammability, crystallization properties of magnesium oxide/(90/10) mLLDPE/(NR/ENR-50) blends. Iranian Polymer Journal (English Edition), 23 (4). pp. 277-287. ISSN 1735-5265

Azman Hassan, (2014) Electrical and flammability properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer composites as insulators in cable applications. Polymer Engineering and Science, 54 (3). pp. 493-498. ISSN 0032-3888

Azman Hassan, (2014) Electron beam irradiation of LDPE Filled with calcium carbonate and metal hydroxides. Polymer-Plastics Technology and Engineering, 53 (13). pp. 1362-1366. ISSN 0360-2559

Azman Hassan, (2013) Electron-beam irradiation of low density polyethylene/ethylene vinyl acetate blends. Journal of Polymer Engineering, 33 (2). pp. 149-161. ISSN 0334-6447

Azman Hassan, (2014) Epoxidized natural rubber toughened polylactic acid/talc composites: Mechanical, thermal, and morphological properties. Journal of Composite Materials, 48 (7). pp. 769-781. ISSN 1530-793X

Azman Hassan, (2014) Epoxidized natural rubber-50 toughened polyamide 6 nanocomposites: the effect of epoxidized natural rubber-50 contents on morphological characterization, mechanical and thermal properties. Journal of Elastomers and Plastics, 46 (3). pp. 269-283. ISSN 0095-2443

Azman Hassan, (2014) Epoxidized natural rubber-toughened polypropylene/organically modified montmorillonite nanocomposites. Journal of Thermoplastic Composite Materials, 27 (2). pp. 233-250. ISSN 0892-7057

Azman Hassan, (2013) Flame retardancy and kinetic behavior of ammonium polyphosphate-treated unsaturated polyester/phenolic interpenetrating polymer network. International Journal of Polymer Analysis and Characterization, 18 (2). pp. 137-145. ISSN 1023-666X

Azman Hassan, (2013) Flammability and thermal characterization of aluminum hydroxide filled with LDPE. International Polymer Processing, 28 (4). pp. 393-397. ISSN 0930-777X

Azman Hassan, (2014) Impact of succinic anhydride on the properties of jute fiber/polypropylene biocomposites. Fibers and Polymers, 15 (2). pp. 307-314. ISSN 1229-9197

Azman Hassan, (2014) Influence of exfoliated graphite nanoplatelets on the flammability and thermal properties of polyethylene terephthalate/polypropylene nanocomposites. Polymer Degradation and Stability, 110 . pp. 137-148. ISSN 0141-3910

Azman Hassan, (2014) Influence of maleic anhydride-grafted polyethylene compatibiliser on the tensile, oxygen barrier and thermal properties of rice husk and nanoclay-filled low-density polyethylene composite films. Journal of Plastic Film & Sheeting, 30 (2). pp. 120-140. ISSN 8756-0879

Azman Hassan, (2014) Interactions of montmorillonite and electron beam irradiation in enhancing the properties of alumina trihydrate-added polyethylene and ethylene vinyl acetate blends. Journal of Composite Materials, 48 (10). pp. 1155-1171. ISSN 1530-793X

Azman Hassan, (2014) Investigation of enhancing effect of nano-montmorillonite on fire-retardant added low-density polyethylene-ethylene vinyl acetate hybrid system. Journal of Thermoplastic Composite Materials, 27 (11). p. 1529. ISSN 0892-7057

Azman Hassan, (2014) Isolation and characterization of cellulose nanowhiskers from oil palm biomass microcrystalline cellulose. Carbohydrate Polymers, 103 (1). pp. 119-125. ISSN 0144-8617

Azman Hassan, (2014) Mechanical and thermal properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites. Polymer Composites, 35 (10). pp. 2029-2035. ISSN 0272-8397

Azman Hassan, (2013) Mechanical properties of mica-filled polycarbonate/poly(acrylonitrile-butadiene-styrene) composites. Polymer-Plastics Technology and Engineering, 52 (7). pp. 727-736. ISSN 0360-2559

Azman Hassan, (2014) Mechanical properties of poly(lactic acid)/ multiwalled carbon nanotubes nanocomposites. Materials Research Innovations, 18 . S614-S617. ISSN 1432-8917

Azman Hassan, (2013) Physical and mechanical properties of jute, bamboo and coir natural fiber. Fibers and Polymers, 14 (10). pp. 1762-1767. ISSN 1229-9197

Azman Hassan, (2014) PLA/Kenaf/APP biocomposites: effect of alkali treatment and Ammonium Polyphosphate (APP) on dynamic mechanical and morphological properties. Polymer - Plastics Technology and Engineering, 53 (8). pp. 760-766. ISSN 1525-6111

Azman Hassan, (2014) Polylactic acid nanocomposites reinforced with cellulose nanowhiskers isolated from oil palm empty fruit bunch. 16th European Conference on Composite Materials, ECCM 2014 .

Azman Hassan, (2013) Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties. Journal of Polymer Engineering, 33 (7). pp. 651-657. ISSN 0334-6447

Aznah Nor Anuar, (2013) Cultivation of aerobic granular sludge for rubber wastewater treatment. Bioresource Technology, 129 . pp. 620-623. ISSN 0960-8524

Aznah Nor Anuar, (2013) Livestock wastewater treatment using aerobic granular sludge. Bioresource Technology, 133 . pp. 630-634. ISSN 0960-8524

Azwadi, (2012) Computational analysis of heat flow in computer casing. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 199-208. ISSN 0094-243X

Azwadi, (2012) Numerical investigation of 2D lid driven cavity using smoothed particle hydrodynamics (SPH) method. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 789-798. ISSN 0094-243X

Azwadi, (2012) Simulation of multicomponent multiphase flow using Lattice Boltzmann Method. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab (2013) Estimation of potential barium sulfate (barite) precipitation in oilfield brines using a simple predictive tool. Environmental Progress and Sustainable Energy, 32 (3). pp. 860-865. ISSN 1944-7442

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of crude oil salt content using a simple predictive tool approach. Journal of Petroleum Science and Engineering, 96-97 . pp. 68-72. ISSN 0920-4105

Baig, Umair and Wani, Waseem A. and Hun, Lee Ting (2015) Facile synthesis of an electrically conductive polycarbazole-zirconium(IV)phosphate cation exchange nanocomposite and its room temperature ammonia sensing performance. New Journal of Chemistry, 39 (9). pp. 6882-6891. ISSN 1144-0546

Bakar, A. A. and Hassan, A. and Yusof, A. F. M. (2009) Effect of processing temperatures on mechanical properties of oil palm empty fruit bunch-filled PVC extrudates. Journal of Reinforced Plastics and Composites, 28 (20). pp. 2433-2443. ISSN 0731-6844

Bakeri, Gh. and Ismail, Ahmad Fauzi and Rahimnejad, M. and Matsuura, T. and Rana, D. (2012) The effect of bore fluid type on the structure and performance of polyetherimide hollow fiber membrane in gas-liquid contacting processes. Separation and Purification Technology, 98 . pp. 262-269. ISSN 1383-5866

Balakrishnan, Harintharavimal and Hassan, Azman and Isitman, Nihat Ali and Kaynak, Cevdet (2012) On the use of magnesium hydroxide towards halogen-free flame-retarded polyamide-6/polypropylene blends. Polymer Degradation and Stability, 97 (8). pp. 1447-1457. ISSN 0141-3910

Basri, H. and Ismail, A. F. and Aziz, M. (2009) Effect of pvp addition in the preparation of polyethersulfone (PES)–AgNO3 antibacterial membrane. Journal of Applied Membrane Science & Technology, 10 . pp. 21-33. ISSN 1823–366X

Basri, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan (2008) Effect of different solvent in the preparation of polyethersulfone(pes)-ag polymer composite. Jurnal Teknologi, 49F . pp. 133-140. ISSN 0127-9696

Bayat, Ali Esfandyari and Junin, Radzuan and Kharrat, Riyaz and Hejri, Shahab (2015) Evaluation of vapour extraction process and its prospect as an enhanced oil recovery method. International Journal of Oil, Gas and Coal Technology, 9 (4). pp. 394-421. ISSN 1753-3317

Bee, Soo-Tueen and Hassan, Azman and Ratnam, Chantara T. and Tee, Tiam-Ting and Lee, Tin Sin (2012) Effects of montmorillonite on the electron beam irradiated alumina trihydrate added polyethylene and ethylene vinyl acetate nanocomposite. Polymer Composites, 33 (11). pp. 1883-1892. ISSN 0272-8397

Bidin, Noriah and Wan Aizuddin, Wan Razali and Saidin, Mohd. Khairi (2009) Generation of femtosecond pulsed from TI:Ssapphire oscillator. Jurnal Fizik UTM, 4 . pp. 18-25. ISSN 0128-8644

Bolong, N. and Ismail, A. F. and Salim, M. R. and Rana , D. (2007) Influence of surface modifying macromolecules (SMMs) on polyethersulfone hollow fiber membranes for water separations. Journal of Applied Membrane Science & Technology, 5 . pp. 11-18. ISSN 1823–366X

Bolong, N. and Ismail, A. F. and Salim, M. R. (2007) Effect of jet stretch in the fabrication of polyethersulfone hollow fiber spinning for water separation. Journal of Applied Membrane Science & Technology, 6 . pp. 17-25. ISSN 1823–366X

Bolong, Nurmin and Ismail, Ahmad Fauzi and Salim, Mohd. Razman and Matsuura, Takeshi (2008) Miscibility characteristics of poly (ethersulfone) (pes) hollow fiber membranes with charged-surface modifying macromolecules (csmm) for water separations applications. Jurnal Teknologi, 49F . pp. 123-132. ISSN 0127-9696

Borhani, Tohid Nejad Ghaffar and Akbari, Vahid and Abd. Hamid, Mohd. Kamaruddin and Abdul Manan, Zainuddin (2015) Rate-based simulation and comparison of various promoters for CO2 capture in industrial DEA-promoted potassium carbonate absorption unit. Journal of Industrial and Engineering Chemistry, 22 . pp. 306-316. ISSN 1226-086X

Bufares, (2012) The effect of unburned gas axial velocity on the characteristics of rotational flame during flashback. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1285-1291. ISSN 0094-243X

Bufares, (2012) Flashback of laminar premixed flame in rotating burner. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1292-1299. ISSN 0094-243X

Bustanur Rosidi, (2012) Conformational transitions of proteins engaged in dna double-strand break repair, analysed by trytophan flourescence emission and fret. Biochemical Journal, 44 (3). pp. 701-709. ISSN 0264-6021

Chan, (2012) Communal microaerophilic-aerobic biodegradation of amaranth by novel NAR-2 bacterial consortium. Bioresource Technology, 105 . pp. 48-59. ISSN 0960-8524

Chan, Mieow Kee and Idris, Ani (2012) Modification of cellulose acetate membrane using monosodium glutamate additives prepared by microwave heating. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2115-2123. ISSN 1226-086X

Chang, Siu Hua and Yaacob, Zulkefli and Mohsin, Rahmat (2007) Effect of various manifold absolute pressures and air flowrate on throttle body injection mixer in compressed natural gas motorcycle. Journal of Chemical and Natural Resources Engineering, 1 . pp. 40-49. ISSN 1833-5255

Chaturvedi, Nitin Dutt and Manan, Zainuddin Abdul and Wan Alwi, Sharifah Rafidah and Bandyopadhyay, Santanu (2015) A linear mathematical model to determine the minimum utility targets for a batch process. Chemical Engineering Transactions, 45 . pp. 115-120. ISSN 2283-9216

Che Man, Siti Hajjar and Hashim, Azanam S. and Md. Akil, Hazizan (2007) Preparation and characterization of styrene-methyl methacrylate In deproteinized natural rubber latex (SMMA-DPNR). E-Polymers . ISSN 1618-7229

Che Yunus, Mohd. Azizi and Salman, Z. and Nik Norulain, N. A. and Mohd. Omar, A. K. (2008) Extraction and identification of compounds from parkia speciosa seeds by supercritical carbon dioxide. Journal of Chemical and Natural Resources Engineering, 2 . pp. 153-163. ISSN 1823-5255

Chee, Tzeming and Sin, Leetin and Bee, Sootueen and Tee, Tiamting and Kadhum, Abdul Amir Hassan and Rahmat, Abdul Razak (2015) Roles of calcium, zinc, copper and titanium compounds on the degradation of polymers. Polymer - Plastics Technology and Engineering, 54 (5). pp. 441-461. ISSN 0360-2559

Chen, Yong and Mat, Hanapi and Xu, Zhinan and Jin, Zhihua and Cen, Peilin (2004) Determination of teicoplanin A2's partition coefficient in different liquid-liquid extraction systems. Chinese Journal of Chemical Engineering, 12 (4). pp. 493-497. ISSN 1004-9541

Cheng, Shu Ian and Stuckey, David C. (2011) Protein recovery from surfactant precipitation. Biotechnology Progress, 27 (6). pp. 1614-1622. ISSN 8756-7938

Cheng Kian Kai, (2014) Global metabolic network reorganization by adaptive mutations allows fast growth of Escherichia coli on glycerol. Nature Communications, 5 . ISSN 2041-1723

Cheng Kian Kai, (2014) Metabolomic analysis of Akt1-mediated muscle hypertrophy in models of diet-induced obesity and age-related fat accumulation. Journal of Proteome Research, 14 (1). pp. 342-352. ISSN 1535-3893

Cheng Kian Kai, (2014) A novel metabolomic data scaling method based on K-L divergence. Spectroscopy and Spectral Analysis, 34 (10). p. 2872. ISSN 1000-0593

Chermahini, Siavash Hosseinpour and Abdul Majid, Fadzilah Adibah (2011) Cosmeceutical values, antimicrobial activities and antioxidant properties of cashew leaves extract. African Journal of Biotechnology, 10 (65). pp. 14573-14582. ISSN 1684-5315

Chew, Sau Yen and Hassan, Azman and Hashim, Shahrir (2003) The Effect Of Blending Acrylic Grafted Pvc And Pvc K-66 With Abs On Impact And Flexural Properties. Jurnal Teknologi Siri Khas A (39A). pp. 107-116. ISSN 0127-9696

Chew, Tin Lee and Morreale, Giacomo and Middelberg, Anton P. J. (2004) Combined In-Fermenter Extraction and Cross-Flow Microfiltration for Improved Inclusion Body Processing. Biotechnology & Bioengineering, 85 (1). pp. 103-113. ISSN 0006-3592

Chew, Yin Hoon and Chua, Lee Suan and Cheng , Kian Kai and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Lee, Chew Tin (2008) Kinetic study on the hydrolysis of palm olein using immobilized lipase. Biochemical Engineering Journal, 39 (3). pp. 516-520. ISSN 1369-703X

Chew, Yin Hoon and Lee, Chew Tin and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Razali, Firdausi (2008) External mass transfer model for the hydrolysis of palm olein using immobilized lipase. Food and Bioproducts Processing, 86 (4). pp. 276-282. ISSN 0960-3085

Chew, Kewhong and Kleme, Jiri Jaromir and Wan Alwi, Sharifah Rafidah and Manan, Zainuddin Abdul (2015) Process modifications to maximise energy savings in total site heat integration. Applied Thermal Engineering, 78 . pp. 731-739. ISSN 1359-4311

Chew, Kewhong and Klemes, Jiri Jaromir and Wan Alwi, Sharifah Rafidah and Manan, Zainuddin Abdul (2015) Process modification of Total Site Heat Integration profile for capital cost reduction. Applied Thermal Engineering, 89 . pp. 1023-1032. ISSN 1359-4311

Chong, Woon Chan and Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza (2008) Pervaporation of isopropanol-water mixture using poly(vinyl) alcohol-zsm-5 membranes. Jurnal Teknologi (49F). pp. 159-166. ISSN 0127-9696

Choong, Thomas S. Y. and Abd. Aziz, Ramlan (2002) Modelling And Simulation Of Retentate-Permeate Recycle Premeator For The Enrichment Of Methane. Jurnal Teknologi F (36F). pp. 17-30. ISSN 0127-9696

Chowdhury, Md. Najmul Kabir and Ismail, Ahmad Fauzi and Beg, Mohammad Dalour Hossen and Hegde, Gurumurthy and Gohari, Rasool Jamshidi (2015) Polyvinyl alcohol/polysaccharide hydrogel graft materials for arsenic and heavy metal removal. New Journal of Chemistry, 39 (7). pp. 5823-5832. ISSN 1144-0546

Chua Lee Suan, (2013) Antioxidant activity of three honey samples in relation with their biochemical components. Journal of Analytical Methods In Chemistry . ISSN 2090-8865

D.H.X Quay, (2011) Overexpression, purification and characterization of the aspergillus niger endoglucase, egla, in pichia pastoris. African Journal of Biotechnology, 10 (11). pp. 2101-2111. ISSN 1684-5315

Danlami, Jibrin Mohammed and Arsad, Agus and Ahmad Zaini, Muhammad Abbas and Sulaiman, Hanizam (2014) A comparative study of various oil extraction techniques from plants. Reviews in Chemical Engineering, 30 (6). pp. 605-626. ISSN 0167-8299

DashtArzhandi, M. Rezaei and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Ng, Becheer and Abdullah, Mohd. Sohaimi (2015) Fabrication and characterization of porous polyetherimide/montmorillonite hollow fiber mixed matrix membranes for CO2 absorption via membrane contactor. Chemical Engineering Journal, 269 . pp. 51-59. ISSN 1385-8947

David, L. I. B. and Ismail, A. F. (2003) Influence of the thermastabilization process and soak time during pyrolysis process on the polyacrylonitrile carbon membranes for O2/N2 separation. Journal of Membrane Science, 213 (1). pp. 285-291. ISSN 0376-7388

Dayana Amira R., (2012) Bioconversion of empty fruit bunches (EFB) and palm oil mill effluent (POME) into compost using trichoderma virens. African Journal of Biotechnology, 10 (81). pp. 18775-18780. ISSN 1684-5315

Dayang Norulfairuz Abang Zaidel, (2014) Encapsulation of anthocyanin from roselle and red cabbage for stabilization of water-in-oil emulsion. 2nd International Conference on Agricultural and Food Engineering (CAFE 2014) - New Trends Forward, 2 . pp. 82-89. ISSN 2210-7843

Dayang Norulfairuz Abang Zaidel, (2012) Enzyme catalyzed oxidative gelation of sugar beet pectin: kinetics and rheology. Food Hydrocolloids, 28 (1). pp. 130-140. ISSN 0268-005X

Dayang Norulfairuz Abang Zaidel, (2014) New ultra-wideband phase shifter design with performance improvement using a tapered line transmission line for a butler matrix UWB application. APPLIED COMPUTATIONAL ELECTROMAGNETICS SOCIETY JOURNAL, 29 (8). p. 617. ISSN 1054-4887

Denni Kurniawan, (2013) Effect of silane treatment on mechanical properties of basalt fiber/polylactic acid ecofriendly composites. Polymer-Plastics Technology and Engineering, 52 (1). pp. 97-100. ISSN 0360-2559

Ee, Ting Wong and Kian, Hwa Chan and Irfan, Muhammad and Idris, Ani and Misran, Effaliza (2015) Enhanced removal of Cu(II) by photocatalytic reduction using maghemite PVA-alginate separable beads: kinetic and equilibrium studies. Separation Science and Technology (Philadelphia), 50 (4). pp. 487-494. ISSN 0149-6395

EI Enshasy, Hesham A. and Mohy EI Din, Mohamed S. and El Sayed, Mohamed and El Sayed, Salah and Haroun, Bakry M. and Hassan, Elsayed A. (2009) Optimization and scaling up of penicillin acylase production process by escherichia coli. World Applied Sciences Journal, 6 (10). pp. 1348-1358. ISSN 1818-4952

El Seyed Nasef, Mohamed Mahmoud and Ahmed Aly, Amgad (2011) Water and charge transport models in proton exchange membranes: An overview. Desalination, 287 . pp. 238-246. ISSN 0011-9164

El-Hefian, (2012) Characterization of aqueous solutions of mixture of chitosan and agar. Journal Of The Chemical Society Of Pakistan, 34 (1). pp. 127-130. ISSN 0253-5106

Elraies, Khaled Abdalla and Yunan, Mat Hussin (2007) Determination of water breakthrough time in noncommunicating layered reservoir. e-journal of reservoir engineering, 1 (1). ISSN 1715-4677

Elraies, Khaled Abdalla and Yunan, Mat Hussin (2008) Investigation of water breakthrough time in non-communicating layered reservoir. Journal of Chemical and Natural Resources Engineering, 3 . pp. 12-18. ISSN 1823-5255

Esah Hamzah, (2013) Influence of pseudomonas aeruginosa bacteria on corrosion resistance of 304 stainless steel. Corrosion Engineering Science and Technology, 48 (2). pp. 116-120. ISSN 1478-422X

Esah Hamzah, (2013) Synthesis of polyaniline with mixed nanofibre-granular morphology. Plastics Rubber and Composites, 42 (7). pp. 299-301. ISSN 1465-8011

Ezuan Mustafa, Mohd. Shahril and Hassan, Azman (2007) Enhancing toughness of polypropylene and polystyrene –application of styrene-b-ethylene-alt-butylenes-b-styrene. Journal of Chemical and Natural Resources Engineering, 1 . pp. 15-21. ISSN 823-5255

Ezzat Chan Abdullah, (2013) Statistical optimization and kinetic studies on removal of zn2+ using functionalized carbon nanotubes and magnetic biochar. Journal of Environmental Chemical Engineering, 1 (3). pp. 486-495. ISSN 2213-3437

Fadzilah Adibah Abd. Majid, (2014) Antiproliferative activity of coumarin and cinnamon water extracts on human ovarian cancer cells. Latin American Journal of Pharmacy, 33 (6). pp. 960-965. ISSN 0326-2383

Fang, Xie and Anthony, Centeno and Bin, Zou and P. Ryan, Mary and Riley, D. Jason and Alford, Neil M. (2013) Tunable synthesis of ordered zinc oxide nanoflower-like arrays. Journal of Colloid and Interface Science, 395 (1). pp. 85-90. ISSN 0021-9797

Farid Nasir Ani, (2013) Experimental and simulation study of fluidization behavior of palm biomass in a circulating fluidized bed riser. Industrial and Engineering Chemistry Research, 52 (49). pp. 17529-17537. ISSN 0888-5885

Farid Nasir Ani, (2013) A new technique to pyrolyse biomass in a microwave system: effect of stirrer speed. Bioresource Technology, 128 . pp. 578-585. ISSN 0960-8524

Feng, C. Y. and Khulbe, K. C. and Matsuura, T. and Ismail, Ahmad Fauzi (2013) Recent progresses in polymeric hollow fiber membrane preparation, characterization and applications. Separation and Purification Technology, 111 . pp. 43-71. ISSN 1383-5866

Ferreira, Frederico and Ghazali, Nazlee Faisal and Cocchini, Ugo and Livingston, Andrew (2006) Rational approach to the selection of conditions for diastereomeric resolution of chiral amines by diacid resolving agents. Tetrahedron: Asymmetry, 17 (9). pp. 1337-1348. ISSN 0957-4166

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Selvan, Murugan and McGuire, Michael Lynn (2005) Integrate Process Simulation and Process Synthesis. Chemical Engineering Progress, CEP, 101 (10). pp. 25-29.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Tan, Yin Ling (2006) Use Cascade Analysis to Optimize Water Network (Dept. of Chem Eng). Chemical Engineering Progress, 102 (7). pp. 45-52. ISSN 0360-7275

Furuyado, Mami and Ahmad Zaini, Muhammad Abbas and Aikawa, Masami and Amano, Yoshimasa and Machida, Motoi (2010) Adsorption of Cd(II) on activated carbon fiber prepared from polyacrylonitrile (PAN). Journal of Environmental Chemistry, 20 (4). pp. 379-384. ISSN 1869-1099

Gh. Bakeri, (2012) Development of high performance surface modified polyetherimide hollow fiber membrane for gas-liquid contacting processes. Chemical Engineering Journal, 198-19 . pp. 327-337. ISSN 1385-8947

Ghalia, M. A. and Hassan, Azman and Yussuf, A. (2011) Mechanical and thermal properties of calcium carbonate-filled PP/LLDPE composite. Journal of Applied Polymer Science, 121 (4). 2413–2421. ISSN 1097-4628

Ghasemi , Mostafa and Wan Daud, Wan Ramli and Ismail, Manal and Rahimnejad, Mostafa and Ismail, Ahmad Fauzi and Jun, Xing Leong and Miskan, Madihah and Kien, Ben Liew (2013) Effect of pre-treatment and biofouling of proton exchange membrane on microbial fuel cell performance. International Journal of Hydrogen Energy, 38 (13). pp. 5480-5484. ISSN 0360-3199

Ghazali, Nazlee Faisal and Ferreira, Frederico and Livingston, Andrew (2006) Chiral separation by enantioselective inclusion complexation-organic solvent nanofiltration. Desalination , 199 (1-3). pp. 398-400. ISSN 0011-9164

Ghazali, Nazlee Faisal and Ferreira, Frederico and Livingston, Andrew (2006) Enantiomer separation by enantioselective inclusion complexation-organic solvent nanofiltration. Tetrahedron: Asymmetry, 17 (2). pp. 1846-1852. ISSN 0957-4166

Gholamreza Zahedi, (2013) Estimation of air concentration in dissolved air flotation (DAF) systems using a simple predictive tool. Chemical Engineering Research & Design, 91 (1). pp. 184-190. ISSN 0263-8762

Gholamreza Zahedi, (2013) Estimation of mixing ratio for saturated air over water. Chemical Engineering and Technology, 36 (1). pp. 109-114. ISSN 0930-7516

Gholamreza Zahedi, (2014) Estimation of the effect of biomass moisture content on the direct combustion of sugarcane bagasse in boilers. International Journal of Sustainable Energy, 33 (2). pp. 349-356. ISSN 1478-6451

Gholamreza Zahedi, (2014) A new method estimates TEG purity versus reconcentrator temperature at different levels of pressure in gas dehydration systems. International Journal of Oil Gas and Coal Technology, 7 (1). pp. 85-94. ISSN 1753-3309

Gholamreza Zahedi, (2013) A novel analytical method predicts plug boundaries of bingham plastic fluids for laminar flow through annulus. Canadian Journal of Chemical Engineering, 91 (9). pp. 1590-1596. ISSN 0008-4034

Gholamreza Zahedi, (2013) Simple yet accurate prediction of liquid molar volume via their molecular structure. Fluid Phase Equilibria, 337 . pp. 183-190. ISSN 0378-3812

Gholamreza Zaheid, (2013) Underground coal gasification: from fundamentals to applications. Progress In Energy and Combustion Science, 39 (1). pp. 189-214. ISSN 0360-1285

Goh, Kian Mau and Mahadi, Nor Muhammad and Hassan, Osman and Abdul Rahman, Raja Noor Zaliha Raja and Illias, Rosli Md (2007) The effects of reaction conditions on the production of γ-cyclodextrin from tapioca starch by using a novel recombinant engineered CGTase. Journal of Molecular Catalysis B: Enzymatic, 49 (1-4). p. 118. ISSN 1381-1177

Goh, Kin Mau and Mahadi, Nor Muhammad and Hassan, Osman and Rahman, Raja Noor Zaliha Raja Abdul and Illias, Rosli Md (2009) A predominant β-CGTase G1 engineered to elucidate the relationship between protein structure and product specificity. Journal of Molecular Catalysis B: Enzymatic, 57 (1-4). pp. 270-277. ISSN 1381-1177

Goh, P. S. and Ismail, Ahmad Fauzi (2015) Review: is interplay between nanomaterial and membrane technology the way forward for desalination? Journal of Chemical Technology and Biotechnology, 90 (6). pp. 971-980. ISSN 0268-2575

Goh, Pei Sean and Ng, B. C. and Ismail, Ahmad Fauzi and Aziz, M. and Hayashi, Y. (2012) Pre-treatment of multi-walled carbon nanotubes for polyetherimide mixed matrix hollow fiber membranes. Journal of Colloid and Interface Science, 386 (1). pp. 80-87. ISSN 0021-9797

Goh Pei Sean, (2013) Carbon nanotubes for desalination: performance evaluation and current hurdles. Desalination, 308 . pp. 2-14. ISSN 0011-9164

Goh Pei Sean, (2011) Recent advances of inorganic fillers in mixed matrix membrane for gas separation separation. Separation and Purification Technology, 81 . pp. 243-264. ISSN 1383-5866

Golshokouh, (2012) Wear resistance evaluation of palm fatty acid distillate using four-ball tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 928-935. ISSN 0094-243X

H., Mimi (2003) Assessing inherent health hazard for proposed plants. Jurnal Teknologi F (39F). pp. 53-65. ISSN 0127-9696

H. Hasbullah, (2012) Asymmetric hollow fibre membranes based on ring-substituted polyaniline and investigation towards its gas transport properties. Journal Of Membrane Science, 397 . pp. 38-50. ISSN 0376-7388

H. K., Farizul and S. Amin, Nor Aishah and D., Suhardy and S., Saiful Azhar and S., Mohd. Nazry (2007) Catalytic conversion of RBD palm oil to gasoline: the effect of silica-alumina ratio in HZSM-5. Jurnal Teknologi, 47 (F). pp. 55-67. ISSN 0127-9696 (Print); 2180-3722 (Electroniscs)

H.A., Mohammed and M. Abed, Azher and M.A., Wahid (2013) The effects of geometrical parameters of a corrugated channel with in out-of-phase arrangement. International Communications In Heat and Mass Transfer, 40 . pp. 47-57. ISSN 0735-1933

H.P.S. Abdul Khalil, (2012) New approach to oil palm trunk core lumber material properties enhancement via resin impregnation. Journal of Biobased Materials and Bioenergy, 6 . pp. 1-10. ISSN 1556-6560

Hadi Nur, (2013) Manufacturing and morphological analysis of composite material of polystyrene nanospheres/cadmium metal nanoparticles. Bulletin of Chemical Reaction Engineering and Catalysis, 7 (3). pp. 224-232. ISSN 1978-2993

Hadi Nur, (2012) Organosufonic acid functionalized zeolic zsm-5 as temperature tolerant proton conducting material. International Journal of Hydrogen Energy, 37 . pp. 12513-12521. ISSN 1879-3487

Hadibarata T., (2012) Characterization of pyrene biodegradation by white-rot fungus polyporus SP. S133. Biotechnology and Applied Biochemistry, 59 (6). pp. 465-470. ISSN 0885-4513

Hadibarata T., (2012) Microbial transformation and sorption of anthracene in liquid culture. Bioprocess and Biosystems Engineering . pp. 1-5. ISSN 1615-7591

Hadzri, (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 659-664. ISSN 0094-243X

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) Prototyping of polymer based microbioreactors: micromachining by using poly(methyl methacrylate) and poly(dimethylsiloxane) polymer materials. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 35-41. ISSN E–ISSN 2180–3722

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) A low cost stirring platform with integrated temperature control scheme for microbioreactor operation. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 1-8. ISSN E-ISSN 2180-3722

Hamdan, Halimaton and Navijanti, Vivin and Nur, Hadi and Muhid, Mohd Nazlan Mohd (2005) Fe(III)-salen encapsulated Al-MCM-41 as a catalyst in the polymerisation of bisphenol-A. Solid State Sciences, 7 (2). pp. 239-244. ISSN 1293-2558

Hamid, (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 905-913. ISSN 0094-243X

Hamid, Mohd. Fauzi (1993) Kesan bahan tambah pelambat ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 7(2) . pp. 8-11. ISSN 0128-0740

Hanafi, N. H. and Hassim, Mimi Haryani and Yusuf, M. R. M. (2015) Emission factor establishment for palm oil mill boiler. Journal of Engineering Science and Technology, 10 (4). pp. 50-60. ISSN 1823-4690

Hanapi Mat, (2013) Removal of hg(ii) from aqueous solution by adsorption using raw and chemically modified rice straw as novel adsorbents. Industrial and Engineering Chemistry Research, 52 (36). pp. 13092-13101. ISSN 0888-5885

Hanapi Mat, (2014) Adsorption Characteristics of Sulfur-Functionalized Silica Microspheres with Respect to the Removal of Hg(II) from Aqueous Solutions. Industrial & Engineering Chemistry Research, 53 (3). pp. 1225-1233. ISSN 0888-5885

Hanapi Mat, (2014) Adsorption enhancement of elemental mercury onto sulphur-functionalized silica gel adsorbents. Environmental Technology, 35 (5). pp. 629-636. ISSN 0959-3330

Hanim, H. and Zurina, R. and Ahmad Fuad, M. Y. and Mohd. Ishak, Z. A. and Hassan, Azman (2008) The effect of calcium carbonate nanofiller on the mechanical properties and crystallisation behaviour of polypropylene. Malaysian Polymer Journal, 3 (1). pp. 38-50. ISSN 1823-7789

Hansen, Sune Balle and Olsen, Stig Irving and Ujang, Zaini (2012) Greenhouse gas reductions through enhanced use of residues in the life cycle of Malaysian palm oil derived biodiesel. Bioresource Technology, 104 . pp. 358-366. ISSN 0960-8524

Harruddin, Norlisa and Othman, Norasikin and Lim, Andeline Ee Sin and Raja Sulaiman, Raja Norimie Orimie (2015) Selective removal and recovery of Black B reactive dye from simulated textile wastewater using the supported liquid membrane process. Environmental Technology (United Kingdom), 36 (3). pp. 271-280. ISSN 0959-3330

Hasan, Nor Badzilah and Tan, Wei Yie and Mohd. Zain, Nor Azimah and Suhaimi, Mohd. Suardi (2015) Immobilization of Candida rugosa lipase in PVA-Alginate-sulfate beads for waste cooking oil treatment. Jurnal Teknologi, 74 (1). pp. 215-222. ISSN 2180-3722

Hashemifard, S. A. and Ismail, A. F. and Matsuura, T. (2011) Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNT) as filler for gas separation: experimental. Journal of Colloid and Interface Science, 359 (2). pp. 359-70. ISSN 1095-7103

Hashemifard, S.A. and Ismail, A.F. and Matsuura, T. (2013) To what extent the conventional gas permeation testing method is reliable for membrane systems? Separation and Purification Technology, 114 . pp. 90-98. ISSN 1383-5866

Hashim, Shahrir and Jamaludin, Shafinaz (2011) swelling behaviors and characterization of oil Palm empty fruit bunch-graft-poly (acrylamide) superabsorbent polymer composites. Sains Malaysiana, 40 (7). pp. 781-787. ISSN 0126-6039

Hashim, Shahrir and Laftah, Waham Ashaier and Ibrahim, Akos N. (2011) Polymer hydrogels: A review. Polymer - Plastics Technology and Engineering, 50 (14). pp. 1475-1486. ISSN 0360-2559

Haslenda Hashim, (2014) Eco village concept for green economic development: Iskandar Malaysia as a case study. Proceedings of the 2014 International Conference and Utility Exhibition on Green Energy for Sustainable Development, ICUE 2014 .

Haslenda Hashim, (2014) Electric System Cascade Analysis (ESCA): solar PV system. International Journal of Electrical Power & Energy Systems, 54 . pp. 481-486. ISSN 0142-0615

Haslenda Hashim, (2014) Energy and emissions benefits of renewable energy derived from municipal solid waste: analysis of a low carbon scenario in Malaysia. Applied Energy, 136 . pp. 797-804. ISSN 0306-2619

Haslenda Hashim, (2014) A feasibility study of renewable energy and carbon emission reduction in Iskandar Malaysia. Proceedings of the 2014 International Conference and Utility Exhibition on Green Energy for Sustainable Development, ICUE 2014 .

Haslenda Hashim, (2014) Integrated biomass and solar town concept for a smart eco-village in Iskandar Malaysia (IM). Renewable Energy, 69 . pp. 190-201. ISSN 0960-1481

Haslenda Hashim, (2013) Integrated biomass and solar town concept for smart eco-village. Chemical Engineering Transactions, 35 . pp. 577-582. ISSN 1974-9791

Haslenda Hashim, (2014) Integrated biomass and solar town: Incorporation of load shifting and energy storage. Energy, 75 . pp. 31-39. ISSN 0360-5442

Haslenda Hashim, (2014) Modelling and optimization of CO2 abatement strategies. Journal of Cleaner Production, 71 . pp. 40-47. ISSN 0959-6526

Haslenda Hashim, (2014) Numerical Descriptive Inherent Safety Technique (NuDIST) for inherent safety assessment in petrochemical industry. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 92 (5). p. 389. ISSN 0957-5820

Haslenda Hashim, (2014) Optimal waste-to-energy strategy assisted by GIS for sustainable solid waste management. 8TH INTERNATIONAL SYMPOSIUM OF THE DIGITAL EARTH (ISDE8), 18 (1). ISSN 1755-1315

Hasrinah Hasbullah, (2013) Mindel s-1000 based asymmetric membranes for o2/n2 separation: effect of polymer concentration. Chemical Engineering Transactions, 32 . pp. 2035-2040. ISSN 1974-9791

Hassan, Azman and Bakar, Aznizam Abu and Yusof, Ahmad Fuad Mohd (2008) Study of processability of poly(vinyl chloride): Effects of acrylic and chlorinated polyethylene impact modifiers, oil palm empty fruit bunch fiber, and mixing temperature. Journal of Vinyl & Additive Technology, 14 (4). pp. 204-210.

Hassan, Azman and H., Hanim and Fuad, M.Y.A and R., Zarina and Ishak, Z.A.M (2008) Properties and structure of polypropylene/ Polyethylene-octene elastomer/nano CaCO 3 composites. Journal of Thermoplastic Composite Materials, 21 (2). pp. 123-140. ISSN 0892-7057

Hassan, Azman and Lim, Jian Wei and Rahmat, Abd Razak and Wahit, Mat Uzir (2006) Mechanical behaviour and fracture toughness evaluation of rubber toughened polypropylene nanocomposites. Plastics, Rubber and Composites Processing and Applications, 35 (1). pp. 37-46. ISSN 0959-8111

Hassan, Azman and Othman, Norhayani and Rahmat, Abdul Razak and Wahit, Mat Uzir (2007) Effect of compatibilizer type on properties of 70:30 polyamide 6/polypropylene/MMT nanocomposites. International Journal of Polymeric Materials, 56 (9). pp. 893-909.

Hassan, Azman and Rahnat, Abdul Razak and Wahit, Mat Uzir and Lim, Jian Wei (2008) Phase morphology and mechanical properties of rubber-toughened polypropylene nanocomposites: Effect of elastomer polarity. Polymer-Plastics Technology and Engineering, 47 (4). pp. 411-419.

Hassan, Azman and Yuan, C. S. (2007) Effect of bar sealing parameter on OPP/MCPP heat seal strength. Express Polymer Letter , 1 (11). pp. 773-779. ISSN 1788-618X

Hassan, Hashim and Mohd Nawawi, Mohd Ghazali (2008) Chitosan as a membrane material for pervaporation separation of isopropanol-water mixtures. Jurnal Teknologi (49F). pp. 207-218. ISSN 0127-9696

Hassan, Onn and Mat, Ramli A Comparative Study Of Two Different Approaches In Teaching Thermodynamics. Thermodynamics . pp. 1-3. (Unpublished)

Hassan, A. and Wee, Y. J. and Ahmad Johari, U. L. (2008) Impact strength of PVC-U - effect of calcium carbonate particles size. Journal of Chemical & Natural Resources Engineering, 2 . pp. 35-40. ISSN 1823-5255

Hassan, Azman and Jian, Wei Lim and Rahmat, Abdul Razak and Wahit, Mat Uzir (2006) Morphology, thermal and mechanical behavior of polypropylene nanocomposites toughened with poly(ethylene-co-octene). Polymer International, 55 (2). pp. 204-215. ISSN 0959-8103

Hassan, Azman and Othman, Norhayani and Wahit, Mat Uzir and Lim, Jian Wei and Rahmat, Abdul Razak and Mohd. Ishak, Zainal Arif?n (2006) Maleic anhydride polyethylene octene elastomer toughened polyamide 6/polypropylene nanocomposites : mechanical and morphological properties. Macromolecular Symposia, 239 (1). p. 191. ISSN 1022-1360

Hassan, Azman and Wahit, Mat Uzir (2009) Thermal characterization of alumina trihydrate (ATH) and flammability studies of ath filled low density polyyethylene. Journal of Industrial Technology .

Hassan, Azman and Wahit, Mat Uzir and Imran, Muhammad and Balakrishnan, Harintharavimal (2011) Recent developments in PA6/PP nanocomposites. Key Engineering Materials, 471-72 . pp. 7-19. ISSN 1013-9826

Hassan, H. and Mohd. Nawawi, M. G. (2008) Crosslinked chitosan membranes for pervaporation separation of isopropanol-water mixtures. Journal of Chemical and Natural Resources Engineering, 2 . pp. 24-34. ISSN 1823-5255

Hassan A., (2011) Polylactic acid based blends, composites and nanocomposites. Advanced Structured Materials, 18 . pp. 361-396. ISSN 1869-8433

Hassan Hadi Abdallah, (2013) Assessment of theoretical methods for the study of hydrogen abstraction kinetics of global warming gas species during their degradation and byproduct formation (IUPAC technical report). Pure and Applied Chemistry, 85 (9). pp. 1901-1918. ISSN 0033-4545

Hassan, A. R. and Abdull, Norhidayah and Ali, Nora’aini and Ismail, A. F. (2007) A theoretical approach on membrane characterization: the deduction of fine structural details of asymmetric nanofiltration membranes. Desalination, 206 . pp. 107-126. ISSN 0011-9164

Hassim, (2013) Simple graphical method for inherent occupational health assessment. Process Safety and Environmental Protection, 91 (6). pp. 438-451. ISSN 0957-5820

Hassim, Mimi Haryani and Hurme, Markku and Edwards, David W. and Aziz, Nik N. N. A. and Rahim, Fariha L. M. (2012) Simple graphical method for inherent occupational health assessment. Process Safety and Environmental Protection . ISSN 0957-5820

Hassim, Mimi Haryani and Hurme, Markku and Amyotte, Paul R. and Khan, Faisal I. (2012) Fugitive emissions in chemical processes: the assessment and prevention based on inherent and add-on approaches. Journal of Loss Prevention in the Process Industries, 25 (5). pp. 820-829. ISSN 0950-4230

Hassin, M. H. (2008) Estimating air volumetric flow rate of outdoor chemical plants for occupational health hazards assessment. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 28-39. ISSN 1823-5255

Hebbar, Raghavendra S. and Isloor, Arun M. and Ismail, Ahmad F. and Shilton, Simon J. and Obaid, Abdulrahman and Fun, Hoongkun (2015) Probing the morphology and anti-organic fouling behaviour of a polyetherimide membrane modified with hydrophilic organic acids as additives. New Journal of Chemistry, 39 (8). pp. 6141-6150. ISSN 1144-0546

Heng, Han Yann and Ali, Mohamed Wijayanuddin and Kamsah, Mohd. Zaki (2007) Fault diagnostic advisory system using moving-range chart and hazard operability study. Journal of Chemical and Natural Resources Engineering, 1 . pp. 50-70. ISSN 1833-5255

Herlina Abdul Rahim, (2013) Evaluation of common pre-processing approaches for visible (VIS) and shortwave near infrared (SWNIR) spectroscopy in soluble solids content (SSC) assessment. Biosystems Engineering, 115 (1). pp. 82-88. ISSN 1537-5110

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) The effect of nanoparticles on gastrointestinal release from modified Kappa-carrageenan nanocomposite hydrogels. Carbohydrate Polymers, 89 (1). pp. 138-145. ISSN 0144-8617

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) Effect of natural cross-linker on swelling and structural stability of kappa-carrageenan/hydroxyethyl cellulose pH-sensitive hydrogels. Korean Journal of Chemical Engineering, 29 (11). pp. 1647-1655. ISSN 0256-1115

Hezaveh, Hadi and Muhamad, Ida Idayu and Noshadi, Iman and Fen, Lim Shu and Ngadi, Norzita (2012) Swelling behaviour and controlled drug release from cross-linked kappa-carrageenan/NaCMC hydrogel by diffusion mechanism. Journal of Microencapsulation, 29 (4). pp. 368-379. ISSN 0265-2048

Ho, Wai Shin and Hashim, Haslenda and Mohammad Rozali, Nor Erniza and Ab. Muis, Zarina and Lim, Jeng Shiun (2015) Electric System Cascade Analysis (ESCA): cost and efficiency trade-off and optimization. Chemical Engineering Transactions, 45 . pp. 517-522. ISSN 1974-9791

Homayoonfal, Maryam and Mehrnia, Mohammad Reza and Niassar, Mojtaba Shariaty and AkbariNiassar, Ahmad and Sarrafzadeh, Mohammad Hossein and Ismail, Ahmad Fauzi (2015) Fabrication of magnetic nanocomposite membrane for separation of organic contaminant from water. Desalination and Water Treatment, 54 (13). pp. 3603-3609. ISSN 1944-3994

Hong, Heng See and Stratza, Simone and Hausera, Peter C. (2013) Electro-driven extraction across a polymer inclusion membrane in a flow-through cell. Journal of Chromatography A, 1300 . pp. 79-84. ISSN 0376-7388

Hossain, K. A. and Jaafar, M. N. M. and Ani, F. N. and Mustafa, A. Small-Scale Application of Urea Based Selective Non-Catalytic Reduction of Nitric Oxide in Diesel Burning Effluent. Proceedings of the Regional Symposium on Chemical Engineering 2003 . C2-1.

Hossain, K. A. and Jaafar, M. N. M. and Mustafa, A. and Ani, F. N. Application of Urea Based Selective Non-Catalytic Reduction of Nitric Oxide in the Combustion Effluent Containing Low Concentration of NOx. Proceeding of 2nd BSME-ASME International Conference on Thermal Engineering .

Hossain, Khandoker Abul and Mohd. Jaafar, Mohammad Nazrim and Mustafa, Azeman and Ani, Farid Nasir (2005) Application Of Commercial Grade Ammonia Liquor In The Selective Non-Catalytic Reduction Of Nox In Combusted Gas From A Diesel Burner. Jurnal Teknologi (42A). pp. 107-118. ISSN 0127-9696

Hosseini, (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1309-1312. ISSN 0094-243X

Hussain, A. and Ani, F.N. and Darus, A.N. and Mustafa, A. Experimental And Computational Studies Of The Hydrodynamics Of The Riser Of A Circulating Fluidized Bed. Proceeding of Brunei International Conference on Engineering and Technology 2005 (BICET 2005) . pp. 1-10.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mokhtar, Hamdan and Azam, Saiful and Mustafa, Azeman (2006) Themochemical behaviour of empty fruit bunches and oil palm shell waste in a circulating fluidized-bed combustor (CFBC). Journal of Oil Palm Research, 18 . pp. 210-218. ISSN 1511-2780

Hussain, A. and Ani, F. N. and Darus, A. N. and Nik, W. B. W. and Mustafa, A. and Salema, A. Simulation of gas-solid flow behaviour in the riser section of a circulating fluidized bed using computational fluid dynamics software. Proceeding of The Joint International Conference on "Sustainable Energy and Environment (SEE)" . pp. 1-5.

Hussain, Ahmad and Nasir Ani, Farid and Darus, Amer Nordin and Ahmad, Zainal and Mustafa, Azeman (2005) Turbulence modeling in the riser of a circulating fluidized bed using CFD sottware. The Malaysian Journal of Analytical Sciences, 9 (3). pp. 418-425. ISSN 1394-2506

Hussain, Mohd. Azlan and Abdul Manan, Zainuddin and Aziz, Norashid (2012) Recent developments on PSE education and research in Malaysia. Computer Aided Chemical Engineering, 31 . pp. 70-74. ISSN 1570-7946

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Ahmed, Zainal (2006) Thermogravimetric and thermochemical studies of Malaysian oil palm shell waste. Jurnal Teknologi A (45A). pp. 43-53. ISSN 0127-9696

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mustafa, Azeman and Salema, Arshad A. Simulation Studies of Gas-Solid in the Riser of a Circulating Fluidized Bed. Proceeding of Fluidized Bed Combustion 2005 . pp. 1-7. (Submitted)

Hussein A. Mohammed, (2013) Generality of brownian motion velocity of two phase approach in interrupted microchannel heat sink. International Communications In Heat and Mass Transfer, 49 . pp. 128-135. ISSN 0735-1933

Hussein A. Mohammed, (2013) Influence of geometrical parameters and forced convective heat transfer in transversely corrugated circular tubes. International Communications In Heat and Mass Transfer, 44 . pp. 116-126. ISSN 0735-1933

Hussein A. Mohammed, (2013) Influence of nanofluid on turbulent forced convective flow in a channel with detached rib-arrays. International Communications In Heat and Mass Transfer, 46 . pp. 97-105. ISSN 0735-1933

Hussin Md. Nor, (2014) Development of solid rocket propellant based on Isophorone Diisocyanate - Hydroxyl terminated natural rubber binder. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 53-58. ISSN 2180-3722

Huyop F., (2012) Degradation of millimolar concentration of the herbicide dalapon (2,2-dichloropropionic acid) by rhizobium sp. Isolated from soil. Biotechnology and Biotechnological Equipment, 26 (4). pp. 3106-3112. ISSN 1310-2818

I. Holzman, Michael and A. Scheff, Peter and Mohd. Yusof, Mohd. Rashid (1990) Application and evaluation of four regression techniques for a chemical mass balance receptor model. - . pp. 1-17. (Unpublished)

Ibrahim, M. H. and Kassim, N. M. and Mohammad, A. B. and Adam, I. (2009) A CWDM/DWDM arrayed waveguide grating based on photodefinable polymer. Optoelectronics And Advanced Materials-Rapid Communications, 3 (1). pp. 13-16. ISSN 1842-6573

Ibrahim, Noorddin and Yusof, Mohamed R. and Siphon, Mohamad (2009) Environmental radioactivity level from the incineration of oil-sludge. Fresenius Environmental Bulletin , 18 (6). pp. 1025-1028. ISSN 1018-4619

Ibrahim, Zuwairie and Khalid, Noor Khafifah and Sheng, Ismail and Buyamin, Salinda and Md. Yusof, Zulkifli and Muhammad, Mohd. Saufee (2011) Function minimization in DNA sequence design based on binary particle swarm optimization. Jurnal Teknologi (Sains & Kej.) Keluaran Khas, 54 . pp. 331-342. ISSN 0127–9696 (Print); 2180-3722 (Online)

Ida Idayu Muhamad, (2014) Coating of mixed commercial beta-mannanase and phytase through spraying on capra hircus pelleted feed. 2nd International Conference on Agricultural and Food Engineering (CAFE 2014) - New Trends Forward, 2 . pp. 102-106. ISSN 2210-7843

Ida Idayu Muhamad, (2013) Controlled drug release via minimization of burst release in ph-response kappa-carrageenan/polyvinyl alcohol hydrogels. Chemical Engineering Research & Design, 91 (3). pp. 508-519. ISSN 0263-8762

Ida Idayu Muhamad, (2014) Effect of different drying methods on the morphology, crystallinity, swelling ability and tensile properties of nata de coco. Sains Malaysiana, 43 (5). pp. 767-773. ISSN 0126-6039

Ida Idayu Muhamad, (2014) Importance of glucose and pseudomonas in producing degradable plastics. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 7-10. ISSN 0127-9696

Ida Idayu Muhamad, (2013) Modification and swelling kinetic study of kappa-carrageenan-based hydrogel for controlled release study. Journal of The Taiwan Institute of Chemical Engineers, 44 (2). pp. 182-191. ISSN 1876-1070

Ida Idayu Muhamad, (2014) Monitoring initial glucose concentration for optimum ph control during fermentation of microbial cellulose in rotary discs reactor. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 594-59 . pp. 319-324. ISSN 1013-9826

Ida Idayu Muhamad, (2014) Newly developed starch-based hydroxyethyl cellulose film with wide spectrum of ph-colour indicator. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 594-59 . pp. 967-971. ISSN 1013-9826

Ida Idayu Muhamad, (2014) Optimization of formulation of floating hydrogels containing gas forming agent using response surface methodology. International Journal of Pharmacy and Pharmaceutical Sciences, 6 (7). pp. 526-530. ISSN 0975-1491

Ida Idayu Muhamad, (2014) Optimization of protein extraction from fermented and non fermented perah seed by using response surface methodology. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 29-33. ISSN 2180-3722

Ida Idayu Muhamad, (2014) Polyaniline-coated halloysite nanotubes: effect of para-hydroxybenzene sulfonic acid doping. Composite Interfaces, 21 (8). pp. 715-722. ISSN 0927-6440

Ida Idayu Muhamad, (2014) Potential source and extraction of Vitamin E from palm-based oils: a review. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 43-50. ISSN 0127-9696

Ida Idayu Muhamad, (2014) Potential use of biofibers for functional immobilization of lactobacillus rhamnosus NRRL 442. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II, 594-59 . pp. 231-235. ISSN 1013-9826

Idris, A. and Ismail, A. F. and Iswandi, S. and Shilton, S. J. (2001) Effect of methanol concentration on the performance of asymmetric cellulose acetate reverse osmosis membranes using dry/ wet phase inversion technique. Jurnal Teknologi F (34F). pp. 39-50. ISSN 0127-9696

Idris, Ani and Ahmed, I. and Jye, H. W. (2007) Performance of cellulose acetate-polyethersulphone blend membrane prepared using microwave heating for palm oil mill effluent treatment. Water Science & Technology, 56 (8). pp. 169-177. ISSN 0273-122384

Idris, Ani and Ahmed, Iqbal (2008) Viscosity behavior of microwave-heated and conventionally heated poly(ether sulfone)/ dimethylformamide/lithium bromide polymer solutions. Journal of Applied Sciences, 108 (1). pp. 302-307.

Idris, Ani and Hew, Ka Yee and Chan, Mieow Kee (2009) Preparation of cellulose acetate dialysis membrane using d-glucose monohydrate as additive. Jurnal Teknologi (Kejuruteraan) (51F). pp. 67-76. ISSN 0127-9696

Idris, Ani and Ismail, A. F. and Noordin, M. Y. and Shilton, S. J. (2002) Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method. Journal of Membrane Science, 205 (1-2). pp. 223-237. ISSN 0376-7388

Idris, Ani and Ismail, A. F. and Noorhayati, M. and Shilton, S. J. (2003) Measurement of Rheologically Induced Molecular Orientation Using Attenuated Total Reflection Infrared Dichroism in Reverse Osmosis Hollow Fiber Cellulose Acetate Membranes and Influence on Separation Performance. Journal of Membrane Science, 213 (1-2). pp. 45-54. ISSN 0376-7388

Idris, Ani and Ismail, A.F. and Gordeyev, S.A. and Shilton, S.J. (2002) Effect Of Rheological Behaviour Of Cellulose Acetate Spinning Solutions On Performance Of Reverse Osmosis Hollow Fiber Membranes. Jurnal Teknologi F (37F). pp. 1-14. ISSN 0127-9696

Idris, Ani and Ismail, Ahmad Fauzi and Shilton, Simon J. and Rashid, Roslina and Musa, M. (2002) The deduction of fine structural details of reverse osmosis hollow fiber membranes using surface force-pore flow model. Separation and Purification Technology, 29 (3). pp. 217-227. ISSN 1383-5866

Idris, Ani and Kormin, Faridah and Noordin, M.Y (2006) Application of response surface methodology in describing the performance of thin film composite membrane. Separation and Purification Technology, 49 (3). pp. 271-280. ISSN 1383-5866

Idris, Ani and Lee, Kuan Yet and Noordin, M. Y. and Chan, Mieow Kee (2008) Response surface methodology approach to study the influence of PEG and water in cellulose acetate dialysis membranes. Jurnal Teknologi F (49F). pp. 39-49. ISSN 0127-9696

Idris, Ani and Mohd. Yusof, Noordin and Wahidin, Suzana (2006) Application of two level full factorial design to lactic acid production using Immobilizad Lactobacillus delbrueckii from pineapple waste. Journal Of Science and Technology in the Tropics (2). pp. 65-74.

Idris, Ani and Noordin, M. Y. and Ismail, A. F. and Shilton, S. J. (2002) Study of shear rate influence on the performance of cellulose acetate reverse osmosis hollow fiber membranes. Journal of Membrane Sciene, 202 . pp. 205-215.

Idris, Ani and Suzana, W (2006) Effect of sodium alginate concentration, bead diameter, initial pH and temperature on lactic acid production from pineapple waste using immobilized Lactobacillus delbrueckii. Process Biochemistry, 41 (5). pp. 1117-1123. ISSN 0032-9592

Idris, Ani and Yet, L.K (2006) The effect of different molecular weight PEG additives on cellulose acetate asymmetric dialysis membrane performance. Journal of Membrane Science, 280 (1-2). pp. 920-927. ISSN 0376-7388

Idris, Ani and Zain, Nor Azimah Mohd and Suhaimi, Mohd Suardi (2008) Immobilization of Baker's yeast invertase in PVA-alginate matrix using innovative immobilization technique. Process Biochemistry, 43 (4). pp. 331-338. ISSN 0032-9592

Idris, Ahmad Kamal and Manan, Muhammad A. and Rafati, Roozbeh and Hamidi, Hossein (2012) Application of sustainable foaming agents to control the mobility of carbon dioxide in enhanced oil recovery. Egyptian Journal of Petroleum (EJPE), 21 (2). pp. 155-163. ISSN 1110-0621

Idris, Ani and Ahmed, Iqbal (2007) A production of polyethersulfone asymmetric membranes using mixture of two solvents and lithium chloride as additive. Jurnal Teknologi (47F). pp. 25-34. ISSN 0127-9696 (Print); 2180-3722 ( Electronics)

Idris, Ani and Hamzah, Fazlena and Tan, Khai Shuan (2011) Preliminary study on enzymatic hydrolysis of treated oil palm (Elaeis) empty fruit bunches fibre (EFB) by using combination of cellulase and ß1-4 glucosidase. Biomass and Bioenergy, 35 (3). pp. 1055-1059. ISSN 0961-9534

Idris, Ani and Ismail, Ahmad Fauzi and Iswandi, Iswandi and Shilton, Simon J. (2001) Effect of methanol concentration on the performance of asymmetric cellulose acetate reverse osmosis membranes using dry/wet phase inversion technique. Jurnal Teknologi, 34F . pp. 39-50. ISSN 2180-3722

Idris, Ani and Majidnia, Zohreh (2015) Evaluation of the CD removal efficacy from aqueous solutions using titania PVA-alginate beads. Desalination and Water Treatment, 56 (1). pp. 266-273. ISSN 1944-3994

Idris, Ani and Misran, E. and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of Cr(VI) by PVA-alginate encapsulated γFe 2O 3 magnetic beads using different types of illumination lamp and light. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Idris, Ani and Mohd. Ismail, Nur Suriani and Hassan, Nursia and Misran, Effaliza and Ngomsik, Audrey Flore (2012) Synthesis of magnetic alginate beads based on maghemite nanoparticles for Pb(II) removal in aqueous solution. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 1582-1589. ISSN 1226-086X

Idris, Ani and Wahidin, Suzana and Noordin, M. Y. (2006) Application of two-level full factorial design to lactic acid production using immobilized Lactobacillus delbrueckii from pineapple waste. Journal of Science & Technology in the Tropics, 2 (1).

Idris, Mohd. Hasbullah and Ahmad, Norhayati (2013) Mechanical properties of stabilized zirconia nanocrystalline eb-pvd coating evaluated by micro and nano indentation. Journal of Advanced Ceramic, 2 (4). 333–340. ISSN 2226-4108

Idris, Ahmad Kamal and Mohd. Arshad, Azmi and Chong, Chee Hou (1993) Pembinaan dan penentukuran minipermeameter. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 2-5.

Idris, Ani and Ismail, A. F. and Gordeyev, S. A. and Shiltom, S. J. (2003) Rheology assessment of cellulose acetate spinning solution and its influence on reverse osmosis hollow fiber membrane performance. Polymer Testing, 22 . pp. 319-325.

Idris, Ani and Mat Zain, Norashikin (2006) Effect of heat treatment on the performance and structural details of polyethersulfone ultrafiltration membranes. Jurnal Teknologi F, 44 (F). pp. 27-40. ISSN 0127-9696

Idroas, Mariani and Mohd. Najib, Suhaila and Ibrahim, M. Nasir and Abdul Rahim, Ruzairi and Badri Mansor, Muhammad Saiful (2012) Initial study on optical tomographic instrumentation system based on CMOS area image sensors. Sensors And Transducers, 139 (4). pp. 133-140. ISSN 1726-5479

Ikhsan, Azman and Kasmungin, Sugiatmo and Idris, Ahmad Kamal (1997) The CO2 flooding: prospect and challenges on Malaysian oil field. Proceedings of Regional Symposium on Chemical Engineering, 2 . pp. 388-393.

Ilbeygi, H. and Ismail, A.F. and Mayahi, A. and Nasef, M.M. and Jaafar, J. and Jalalvandi, E. (2013) Transport properties and direct methanol fuel cell performance of sulfonated poly (ether ether ketone)/cloisite/triaminopyrimidine nanocomposite polymer electrolyte membrane at moderate temperature. Separation and Purification Technology, 118 . pp. 567-575. ISSN 1383-5866

Ilbeygi, Hamid and Ghasemi, Mostafa and Emadzadeh, Daryoush and Ismail, Ahmad Fauzi and Zaidi, S. M. Javid and Aljlil, Saad A. and Jaafar, Juhana and Martin, Darren and Keshani, Samaneh (2015) Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell. International Journal of Hydrogen Energy, 40 (1). pp. 477-487. ISSN 0360-3199

Illias, Md Rosli and Ismail, Ahmad Fauzi and A.M.M, Sakinah and Hassan, Osman (2007) Development of enzymatic member reactor (EMR) for cyclodextrins production. Journal of Applied Science, 7 (15). 2028 -2032. ISSN 1812-5654

Illias, R.M. and Deris, Safaai and Nanda, S and Zaki, N.M (2003) Assignment of protein sequence to functional family using neural network & Dempster-Shafer theory. World Wide Web Journal of Biology, 8 (1). pp. 110-122.

Illias, Rosli Md and A.M, Mimi Sakinah and Hassan, Osman and Ismail, Ahmad Fauzi and A.W, Zularisam (2008) Role of starch pre-treatment temperature on types of cyclodextrins produced from raw tapioca starch. Malaysian Journal of Science, 27 (1). pp. 101-110. ISSN 1823-8505

Illias, Rosli Md and Hassan, Osman and Ahmad, Arshad and Mahadi, Nor Muhammad and Lo, Po Kim (2007) Excretory over-expression of Bacillus sp. G1 cyclodextrin glucanotransferase (CGTase) in Escherichia coli: Optimization of the cultivation conditions by response surface methodology. Enzyme and Microbial Technology, 40 (5). pp. 1256-1263. ISSN 0141-0229

Illias, Rosli Md. and Haiyee, Zaibunnisa Abdul and Said, Mamot and Saim, Norashikin and Mustapha, Wan Aida Wan (2008) Characterization of cyclodextrin complexes with turmeric oleoresin. Food Chemistry . ISSN 0308-8146

Illias, Rosli Md. and Ong, Rui Min and Goh, Kian Mau and Mahadi, Nor Muhammad and Hassan, Osman and Rahman, Raja Noor Zaliha Raja Abdul (2008) Cloning, extracellular expression and characterization of a predominant β-CGTase from Bacillus sp. G1 in E. coli. Journal of Industrial Microbiology and Biotechnology, 35 (12). pp. 1705-1714. ISSN 1367-5435 (Print) 1476-5535 (Online)

Ing, (2012) Experimental study the effect of speeds in wear using fourball tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 226-232. ISSN 0094-243X

Ishtiaque Ahmed, (2014) Parking generation by "pharmacy" land use type in Johor Bahru, Malaysia. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 23-26. ISSN 2180-3722

Ismail, A. F. and Hafiz, W. A. (2005) Development of Gas-Separation Membrane-Assisted Lead-Acid Battery. Journal of Power Sources, 141 (1). pp. 177-187. ISSN 0378-7753

Ismail, A. F. and Hassan, A. R. (2004) The deduction of fine structural details of asymmetric nanofiltration membranes using theoretical models. Journal of Membrane Science, 231 . pp. 23-36.

Ismail, A. F. and Kusworo, T. D. and Mustafa, A. and Hasbullah, H. (2006) Advanced materials for membrane-based gas separation. Journal of Applied Membrane Science & Technology, 3 . pp. 29-64. ISSN 1823–366X

Ismail, A. F. and Lorna, W. (2002) Penetrant-induced plasticization phenomenon in glassy polymers for gas separation membrane. Separation Purification and Technology, 27 (3). pp. 173-194. ISSN 1383-5866

Ismail, A. F. and Lorna, W. (2003) Suppression of plasticization in polysulfone membranes for gas separations by heat-treatment technique. Separation and Purification Technology, 30 . pp. 37-46. ISSN 1383-5866

Ismail, A. F. and Ng, B. C. and Abdul Rahman, W. A. W. (2003) Effects of shear rate and forced convection residence time on asymmetric polysulfone membranes structure and gas separation performance. Separation and Purification Technology, 33 (3). pp. 255-272. ISSN 1383-5866

Ismail, A. F. and Shilton, S. J. (2000) The Practical Use Of Resistance Modeling To Interpret The Gas Separation Properties Of Hollow Fiber Membranes. Jurnal Teknologi F (32F). pp. 93-101. ISSN 0127-9696

Ismail, A. F. and Zubir, N and Nasef, M. M. and Dahlan, K. M. and Hassan, A. R. (2005) Physico-chemical study of sulfonated polystyrene pore-filled electrolyte membranes by electrons induced grafting. Journal of Membrane Science, 254 (1). pp. 189-196. ISSN 0376-7388

Ismail, Ahmad Fauzi and A. M., Mimi Sakinah and Md. Illias, Rosli and Hassan, Osman and A. W., Zularisam (2006) ATR/FTIR spectroscopy analysis of fouled membrane during separation of Cyclodextrins (O39). Journal of Solid State Science and Technology Letters, 13 (2). p. 79. ISSN 0128-8393

Ismail, Ahmad Fauzi and A. M., Mimi Sakinah and Md. Illias, Rosli and Hassan, Osman and A. W., Zularisam (2006) The effect of pretreatment temperature on granule starch during cyclodextrins production (p9). Journal of Solid State Science and Technology Letters, 13 (2). p. 216. ISSN 0128-8393

Ismail, Ahmad Fauzi and Hafiz, Wan Ahmad (2002) Effect of Polysulfone Concentration on the Performance of Membrane-Assisted Lead Acid Battery. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 815-821. ISSN 0125-3395

Ismail, Ahmad Fauzi and Kusworo, Tutuk Djoko and Mustafa, A. (2008) Enhanced gas permeation performance of polyethersulfone mixed matrix hollow fiber membranes using novel Dynasylan Ameo silane agent. Journal of Membrane Science, 319 (1-2). pp. 306-312. ISSN 0376-7388

Ismail, Ahmad Fauzi and Lai, Ping Yean (2003) Review on the development of defect-free and ultrathin- skinned asymmetric membranes for gas separation through manipulation of phase inversion and rheological factors. Journal of Applied Polymer Science, 88 (2). pp. 442-451. ISSN 0021-8995

Ismail, Ahmad Fauzi and Mohd. Ibrahim, Suhaina and Nasri, Nor Shawal (2002) Effects of dope extrusion rate on the morphology and gas separation performance of asymmetric polysulfone hollow fiber membranes for 024 separation. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 833-842. ISSN 0125-3395

Ismail, Ahmad Fauzi and Mohd. Sanip, Suhaila (2006) Determination of hydrogen storage capacity of carbon nanotubes via volumetric differential pressure techniqye (o104). Journal of Solid State Science and Technology Letters, 13 (2). pp. 153-154. ISSN 0128-8393

Ismail, Ahmad Fauzi and Rahim, R. A. and Rahman, W. A. W. A. (2008) Characterization of polyethersulfone/Matrimid® 5218 miscible blend mixed matrix membranes for O2/N2 gas separation. Separation and Purification Technology, 63 . pp. 200-206. ISSN 1383-5866

Ismail, Ahmad Fauzi and Ridzuan, Norida and Abdul Rahman, Sunarti (2002) Latest development on the membrane formation for gas separation. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 1025-1043. ISSN 0125-3395

Ismail, Issham and Kweh, Wei Loon (2003) Matrix acidizing with gelled acid. Jurnal Teknologi F (38F). pp. 13-24. ISSN 0127-9696

Ismail, Noor Maizura and Lim, Yen Fei and Lim, Lai Cheng and Chieng, Yu Yuen and Kamarudin, Khairol Sozana Nor and Mat, Hanapi (2005) Adsorption of Protein on H-Beta Zeolite. Proceeding of International Conference of Chemical and Bioprocess Engineering .

Ismail, A. F. and Ahmad, Anwar and Abdul Munaim, Mimi Sakinah and Zularisam, A. W. and Matsuura, T. (2011) Role of natural organic matter (NOM), colloidal particles, and solution chemistry on ultrafiltration performance. Separation and Purification Technology, 78 (2). pp. 189-200. ISSN 1383-5866

Ismail, A. F. and David, L. I. B. (2003) Future direction of R&D in carbon membranes for gas separation. Membrane Technology, April 2003 . pp. 1-5.

Ismail, A. F. and Haron, S. (2000) Development of a simulation model for a hollow fiber membrane N2-H2 separation system. Jurnal Teknologi F (32F). pp. 45-56. ISSN 0127-9696

Ismail, A. F. and Hassan, A. R. (2007) Effect of additive contents on the performances and structural Properties of Asymmetric Polyethersulfone (PES) nanofiltration membranes. Separation and Purification Technology, 55 (1). pp. 98-109. ISSN 1383-5866

Ismail, A. F. and Lai, P. Y. (2003) Effects of phase inversion and rheological factors on formation of defect-free and ultrathin-skinned asymmetric polysulfone membranes for gas separation. Separation and Purification Technology, 33 (2). pp. 127-143. ISSN 1383-5866

Ismail, A.F. and Hassan, A.R. (2006) Formation and Characterization of Asymmetric Nanofiltration Membrane: Effect of Shear Rate and Polymer Concentration. Journal of Membrane Science, 270 (1-2). pp. 57-72.

Ismail, Ahmad Fauzi and Aziz, Madzlan and Basri, H. (2011) Polyethersulfone (PES)-silver composite UF membrane: Effect of silver loading and PVP molecular weight on membrane morphology and antibacterial activity. Desalination, 273 (1). pp. 72-80. ISSN 0011-9164

Ismail, Ahmad Fauzi and Aziz, Madzlan and Sanip, S. M. and Goh, P. S. and Ng, B. C. (2011) Recent advances of inorganic fillers in mixed matrix membrane for gas separation. Separation and Purification Technology, 81 (3). pp. 243-264. ISSN 1383-5866

Ismail, Ahmad Fauzi and Bakeri, Gh. and Matsuura, T. (2011) The effect of phase inversion promoters on the structure and performance of polyetherimide hollow fiber membrane using in gas-liquid contacting process. Journal of Membrane Science, 383 (1-2). pp. 159-169. ISSN 0376-7388

Ismail, Ahmad Fauzi and Bolong, Nurmin and Salim, Mohd. Razman and Matsuura, T. A review of the effects of emerging contaminants in wastewater and options for their removal. Desalination, 238 (1-3). pp. 229-246. ISSN 00119164

Ismail, Ahmad Fauzi and Devaraj, V. and Zairossani, M. N. (2009) Characterisation offoulants in a PVDF tubular cross flow ultrafiltration membrane by ATR/FTIR spectrometry. Journal of Rubber Research , 12 (2). pp. 71-79. ISSN 1511-1768

Ismail, Ahmad Fauzi and Goh, Pei Sean (2015) Graphene-based nanomaterial: the state-of-the-art material for cutting edge desalination technology. Desalination, 356 . pp. 115-128. ISSN 0011-9164

Ismail, Ahmad Fauzi and Hashemifarda, S. A. and Matsuura, T. (2011) Facilitated transport effect of ag+ ion exchanged halloysite notubes on the performance of polyetherimide mixed matrix membrane for gas separation. Journal of Membrane Science, 379 . pp. 378-385. ISSN 0376-7388

Ismail, Ahmad Fauzi and Kusworo, T. D. and Mustafa, A. (2008) Gas permeation performance of polysulfone-zeolite 4a hollow finer mixed matrix membrane using 3-aminopropyltriethoxysilane as silane agent. Journal of Chemical and Natural Resources Engineering, 2 . pp. 108-122. ISSN 1823-5255

Ismail, Ahmad Fauzi and Lai, P. Y. (2004) Development of Defect-Free Asymmetric Polysulfone Membranes for gas separation using response surface methodology. Separation and Purification Technology, 40 (2). pp. 191-207. ISSN 1383-5866

Ismail, Ahmad Fauzi and Lau, Woei Jye (2008) The effects of structural and electrical properties of hollow fiber nanofiltration membranes on salt and dye removal under different solution properties. Jurnal Teknologi, 49F . pp. 103-113. ISSN 0127-9696

Ismail, Ahmad Fauzi and Mansourizadeh, A. (2011) Preparation and characterization of porous PVDF hollow fiber membranes for CO(2) absorption: Effect of different non-solvent additives in the polymer dope. International Journal of Greenhouse Gas Control, 5 (4). pp. 640-648. ISSN 1750-5836

Ismail, Ahmad Fauzi and Mohtar, S. S. and Matsuura, T. (2011) Preparation and characterization of SPEEK/MMT-STA composite membrane for DMFC application. Journal of Membrane Science, 371 (1-2). pp. 10-19. ISSN 0376-7388

Ismail, Ahmad Fauzi and Salleh, W. N. W. and Matsuura , T. and Abdullah, M. S. (2011) Precursor selection and process conditions in the preparation of carbon membrane for gas separation: a review. Separation and purification reviews, 40 (4). pp. 261-311. ISSN 1542-2119

Ismail, Ahmad Fauzi and Tan, Chin Yin and Chan, Fook Kiong (2001) Effects of feed pressure and retentate flow rate on the performance of locally developed polysulfone membrane oxygen enrichment system. Jurnal Teknologi F, 34F . pp. 11-20. ISSN 0127-9696

Ismail, Ahmad Fauzi and Yusof, Norhaniza (2011) Polyacrylonitrile/acrylamide-based carbon fibers prepared using a solvent-free coagulation process: Fiber properties and its structure evolution during stabilization and carbonization. Polymer Engineering and Science, 52 (2). pp. 360-366. ISSN 1224-5984

Ismail, I. and P., S. Lim (2008) The performance of locally produced xanthan gum in drilling mud. Journal of Chemical and Natural Resources Engineering, 2 . pp. 49-57. ISSN 1823-5255

Ismail, Issham and Ann Poon, Huang (2009) The application of methyl glucoside as shale inhibitor in sodium chloride mud. Jurnal Teknologi, 50 (F). pp. 53-65. ISSN 2180-3722

Ismail, Mohd. Halim Shah and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2009) Research work on steam accumulator in palm oil mill. European Journal of Scientific Research, 37 (4). pp. 628-640. ISSN 1450-216X

Ismail, Mohd. Halim Shah and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2009) Review of literature on steam accumulator sizing in palm oil mill. European Journal of Scientific Research, 37 (4). pp. 542-551. ISSN 1450-216X

Ismail, Nabawia M. and Ismail, Ahmad F. and Mustafa, Azeman and Matsuura, Takeshi and Soga, T. and Nagata, Kenji and Asaka, T. (2015) Qualitative and quantitative analysis of intercalated and exfoliated silicate layers in asymmetric polyethersulfone/cloisite15A® mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Journal, 268 . pp. 371-383. ISSN 1385-8947

Ismail , A.F. and Lai, P.Y. (2002) Effects of Shear Rate on Morphology and Gas Separatlon Performance as Asymetric Polysulfone Membranes. ASEAN Journal of Chemical Engineering (AJChE), 2 (1). pp. 67-74. ISSN 1655-4418

Ismail , Ahmad Fauzi and Hassan, Abdul Rahman and Ng, Be Cheer (2002) Effect of shear rate on the performance of nanofiltration membrane for water desalination. Songklanakarin Journal Science and Technology, 24 (Suppl). pp. 879-889. ISSN 0125-3395

Ismail M., (2011) Behavior of concrete with polymer additive at fresh and hardened states. Procedia Engineering, 14 . pp. 2230-2237. ISSN 1877-7058

Ismail, A. F. and David, L. I .B. (2001) A Review on the Latest Development of Carbon Membranes for Gas Separation. Journal of Membrane Science, 193 (1). pp. 1-18. ISSN 0376-7388

Ismail, A. F. and Dunkin, I. R. and Gallivan, S. L. and Shilton, S. J. (1999) Production of Super Selective Polysulfone Hollow Fiber Membranes for Gas Separation. Polymer, 40 (23). pp. 6499-6506. ISSN 0032-3861

Ismail, A. F. and Kumari, S. N. (2004) Potential effect of potting resin on the performance of hollow fibre membrane modules in a CO2/CH4 gas separation system. Journal of Membrane Science, 236 . pp. 183-191.

Ismail, A. F. and Mustaffar, M. I. and Illias, R. M. and Abdullah, M. S. (2006) Effect of dope extrusion rate on morphology and performance of hollow fibers membrane for ultrafiltration. Separation and Purification Technology, 49 (1). pp. 10-19. ISSN 1383-5866

Ismail, A. F. and Shillton, S. J. and Dunkin, I. R. and Gallivan, S. L. (1997) Direct Measurement of Rheologically Induced Molecular Orientation in Gas Separation Hollow Fibre Membranes and Effects on Selectivity. Journal of Membrane Science, 126 (1). pp. 133-137. ISSN 0376-7388

Ismail, A. F. and Shilton, S. J. (1998) Polysulfone gas separation hollow fiber membranes with enhanced selectivity. Journal of Membrane Science, 139 (2). pp. 285-286. ISSN 0376-7388

Ismail, Abdul Razak and Khor, Siak Foo (2001) Feasibility study of palm oil esters as based fluid in drilling operation. Proceedings of regional Conference on Young Scientists 2001 . pp. 23-28.

Ismail, Issham (1993) The importance of having an accurate multiphase flow correlations program. Proceedings of International Colloquium and Exposition on Computer Applications in Coastal & Offshore Engineering . ix-11.

Ismail, Issham and A. Aziz, Ramlan (1989) Penggunaan teknik mikropenurasan aliran silang dalam pengeluaran air suntikan. Prosiding Simposium Jurutera Kimia Malaysia Ke-5 . pp. 250-264.

Ismail, Issham and Abdul Kadir, Abdul Aziz (1998) The importance of implementing proper mixing procedures in the preparation of HEC and corn starch mixtures for controlling fluid loss. Proceedings of International Conference on Mixing and Crystallization .

Ismail, Issham and Idris, Ahmad Kamal (1997) Keupayaan kanji jagung sebagai bahan tambah kawalan kehilangan bendalir dalam industri huluan petroleum. Proceedings of Science & Technology Developments in the East Coast States with Special Reference to Chemistry .

Ismail, Issham and Ismail, Abdul Razak and Yang, Juhari (1999) Managing drilling mud weight using ilmenite. Proceedings of World Engineering Congress .

Issham Ismail, (2014) Improving shale inhibitive performance using methyl glucoside (MEG) in potassium chloride mud. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 27-35. ISSN 2180-3722

Istadi, Istadi and Saidina Amin, Nor Aishah (2005) A hybrid numerical approach for multi-responses optimization of process parameters and catalyst compositions in CO2 OCM process over CaO-MnO/CeO2 catalyst. Chemical Engineering Journal, 106 . pp. 213-227. ISSN 1385-8947

Istadi I., (2011) Catalyst deactivation simulation through carbon deposition in carbon dioxide reforming over ni/cao-al 2o 3 catalyst. Bulletin of Chemical Reaction Engineering and Catalysis, 6 (2). pp. 129-136. ISSN 1978-2993

Izwyn Zulkapri, (2013) Gender, airborne chemical monitoring, and physical work environment are related to indoor air symptoms among nonindustrial workers in the Klang Valley, Malaysia. Therapeutics and Clinical Risk Management, 9 . ISSN 1176-6336

J., Xu and H., Jiang and J., Li and K., Cheng K. and J., Dong and Z., Chen (2015) 1H NMR-based metabolomics investigation of copper-laden rat: a model of Wilson's disease. PLoS ONE, 10 (4). ISSN 1932-6203

J., Norafiqah and M., Rashid and R., Firdausi (2003) Tahap kontaminasi Bioearosol : satu kajian kes. Jurnal Teknologi F (39F). pp. 1-10. ISSN 0127-9696

Jaafar, Jaafariah and Ismail, Ahmad Fauzi and Mustafa, Azeman (2007) Physicochemical study of poly(ether ether ketone) electrolyte membranes sulfonated with mixtures of fuming sulfuric acid and sulfuric acid for direct methanol fuel cell application. Materials Science and Engineering A, 460-461 . pp. 475-484. ISSN 0921-5093

Jaafar , J. and Ismail, A. F. (2007) Preparation and characterization of high methanol resistance sulfonated poly(ether ether ketone) membrane for DMFC application. Journal of Applied Membrane Science & Technology, 6 . pp. 1-8. ISSN 1823–366X

Jafari, (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 480-485. ISSN 0094-243X

Jamarosliza Jamaluddin, (2014) Effect of reaction conditions on the thermal stability of polystyrene grafted oil palm empty fruit bunch (OPEFB) fiber. Journal of Polymer Engineering, 34 (2). pp. 185-191. ISSN 0334-6447

Jamil, Siti Munira and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi and Mohamed, Mohamad Azuwa (2015) Role of lithium oxide as a sintering aid for a CGO electrolyte fabricated via a phase inversion technique. RSC Advances, 5 (72). pp. 58154-58162. ISSN 2046-2069

Jamil, Siti Munira Unira and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. and Jaafar, Juhana and Ismail, Ahmad F. and Li., Kang (2015) Recent fabrication techniques for micro-tubular solid oxide fuel cell support: a review. Journal of the European Ceramic Society, 35 (1). pp. 1-22. ISSN 0955-2219

Jaswar; Maimun, (2012) Effect of stern hull shape on turning circle of ships. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1191-1196. ISSN 0094-243X

Jaswar; Maimun, (2012) An integrated cfd simulation tool in naval architecture and offshore (NAO) engineering. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1175-1181. ISSN 0094-243X

Jaswar; Maimun, (2012) Study on zigzag maneuver characteristics of v-u very large crude oil (VLCC) tankers. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1128-1132. ISSN 0094-243X

Javadi, Ali and Abouzari-Lotf, Ebrahim and Mehdipour-Ataei, Shahram and Zakeri, Masoumeh and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Ripin, Adnan (2015) High refractive index materials: a structural property comparison of sulfide- and sulfoxide-containing polyamides. Journal of Polymer Science, Part A: Polymer Chemistry, 53 (24). pp. 2867-2877. ISSN 0887-624X

Javadi, Ali and Najjar, Zahra and Bahadori, Saedeh and Vatanpour, Vahid and Malek, Ali and Abouzari-Lotf, Ebrahim and Shockravi, Abbas (2015) High refractive index and low-birefringence polyamides containing thiazole and naphthalene units. RSC Advances, 5 (111). pp. 91670-91682. ISSN 2046-2069

Javaid Akhtar, (2011) Combined adsorption and catalytic ozotion for removal of sulfamethoxazole using fe2o3/ ceo2 loadeed activated carbon. Chemical Engineering Journal, 170 (1). pp. 136-144. ISSN 1385-8947

Jawaid, Mohammad and Abdul Khalil, H. P. S. and Hassan, Azman and Abdallah, Elgorban (2012) Bi-layer hybrid biocomposites: chemical resistant and physical properties. BioResources, 7 (2). pp. 2344-2355. ISSN 1930-2126

Johari, Anwar and Mohd. Yunus, Rosli and Noordin, Mohd. Suffian and Md. Ghazali, Mohd. Nazlee Faisal and Tuan Abdullah, Tuan Amran (2001) MmNi5 and MmNi4.85Fe0.15 as Hydrogen Storage Medium. Jurnal Teknologi F (35F). pp. 1-10. ISSN 0127-9696

Johari, Anwar and Taib, Mohamad Rozainee (2007) Effect of sand sizes on the fluidization behavior in circular and rectangular columns. Journal of Chemical and Natural Resources Engineering, 2 . pp. 14-21. ISSN 1833-5255

Johari, Khairiraihanna and Saman, Norasikin and Mat, Hanapi (2014) A comparative evaluation of mercury(II) adsorption equilibrium and kinetics onto silica gel and sulfur-functionalised silica gels adsorbents. Canadian Journal of Chemical Engineering, 92 (6). pp. 1048-1058. ISSN 0008-4034

John, Agnes Aruna Runa and Subramanian, Aruna Priyadarshini Riyadarshini and Vellayappan, Muthu Vignesh Ignesh and Balaji, Arunpandian and Jaganathan, Saravana Kumar and Paramalinggam, T. and Supriyanto, Eko and Yusof, Mustafa A. R. (2015) Review : physico-chemical modification as a versatile strategy for the biocompatibility enhancement of biomaterials. RSC Advances, 5 (49). pp. 39232-39244. ISSN 2046-2069

Jon Efendi, (2013) A new way to control the coordination of titanium (iv) in the sol-gel synthesis of broom fibers-like mesoporous alkyl silica-titania catalyst through addition of water. Chemical Engineering Journal, 222 . pp. 23-31. ISSN 1385-8947

Jon Efendi, (2013) Temperature-controlled selectivity in oxidation of 1-octene by using aqueous hydrogen peroxide in phase-boundary catalytic system. Applied Catalysis A: General, 460-46 . pp. 21-25. ISSN 0926-860X

Jong, (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 604-611. ISSN 0094-243X

Junin, Radzuan and Manan, Muhammad A. and Hamidi, Hossein and Rafati, Roozbeh (2012) A role of ultrasonic frequency and power on oil mobilization in underground petroleum reservoirs. Journal of Petroleum Exploration and Production Technology, 2 (1). pp. 29-36. ISSN 2190-0558 (Print); 2190-0566 (Electronic)

Junin R., (2011) Adsorption of nanonionic surfactants on clay minerals. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 113-122. ISSN 0127-9696

Junin, Radzuan and Mustapha, Saari (1988) Local calcium carbonate powder: its properties and application as fillers. PARTEC '88 . pp. 1-7.

Jusoh, (2012) Crude palm oil as a bioadditive in polypropylene blown films. Bioresources, 7 (1). pp. 859-867. ISSN 1930-2126

Jusoh, N. and Abdul Aziz, A. (2007) Immobilization of glucose oxidase/ferrocene carboxylic acid in composite silica solgel/cross-linked poly (vinyl alcohol)/nalion membrane. Malaysian Journal of Chemical Engineering . pp. 123-132.

Jusoh, M. and Mohd. Yunus, R. and Abu Hassan, M. A. (2008) Effect of initial concentration of solution and coolant temperature on a new progressive freeze concentration system. Journal of Chemical and Natural Resources Engineering, 2 . pp. 122-129. ISSN 1823-5255

Kamar, (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 247-254. ISSN 0094-243X

Kamar, (2012) Numerical analysis of air-flow and temperature field in a passenger car compartment. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 854-862. ISSN 0094-243X

Kamariah Ismail, (2014) Measuring supply chain using SCOR model in palm oil downstream industry: a review. Lecture Notes in Engineering and Computer Science, 2 . pp. 967-972. ISSN 2078-0958

Kamarizan Kidam, (2014) Accident contributor interconnection study as a basis for accident mechanism prediction. CISAP6: 6th International Conference on Safety & Environment in Process & Power Industry, 36 . pp. 25-30. ISSN 1974-9791

Kamarizan Kidam, (2014) Accident prevention approach throughout process design life cycle. Process Safety and Environmental Protection, 92 (5). p. 422. ISSN 0957-5820

Kamarizan Kidam, (2013) Analysis of equipment failures as contributors to chemical process accidents. Process Safety and Environmental Protection, 91 (1-2). pp. 61-78. ISSN 0957-5820

Kamarizan Kidam, (2014) An investigation into the need of process safety management (PSM) in the palm oil industry. Applied Mechanics and Materials, 625 . pp. 458-461. ISSN 1660-9336

Kamarizan Kidam, (2013) Method for identifying contributors to chemical process accidents. Process Safety and Environmental Protection, 91 (5). pp. 367-377. ISSN 0957-5820

Kamarizan Kidam, (2013) Statistical analysis of contributors to chemical process accidents. Chemical Engineering & Technology, 36 (1). pp. 167-176. ISSN 0930-7516

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. Equilibrium Model Of Gas Adsorption On Zeolite. Proceeding of Annual Fundamental Science Seminar, 2004 . pp. 1-5.

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. Gas Adsorption Characteristics of Metal Exchanged Zeolite. Proceeding of The 10th Asian Pacific Confederation of Chemical Engineers Congress .

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. Methane adsorption characteristic dependency on zeolite structures and properties. Proceeding of ‘ The 17th Symposium of Malaysian Chemical Engineers ’ Copthorne Orchid Hotel, Penang, 29 .

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. (2003) Zeolite Synthesis For Methane Adsorbent: Effect Of Experimental Conditions On Structural Framework Formation. Proceeding of ‘National Symposium of Science and Technology’ Ministry of Science, Technology, and Environmental .

Kamarudin, K. S. N. and Wah, L. M. and Yuan, C. Y. and Hamdan, H. and Mat, H. Rice Husk Based Zeolite As Methane Adsorbent. Proceeding of 18th Symposium of Malaysian Chemical Engineers�, Universiti Teknologi Petronas, . pp. 1-6.

Kamarudin, Diyana and Ali, Nora’aini and Ismail, Mahirah and Othman, Norasikin (2015) Fouling evaluation for ultrafiltration of protein-based washwater: a resistance-in-series model approach. Jurnal Teknologi, 74 (7). pp. 41-47. ISSN 2180-3722

Kamarudin, Khairul Sozana Nor (2008) Methane adsorption on structurally different zeolites. ASM Science Journal, 2 (1). pp. 35-44. ISSN 1823-6782

Kamarudin , K. S. N. and Mat, H. and Hamdan, H. Structural synthesis and modification of zeolite as methane adsorbent. Proceeding of Annual Fundamental Science Seminar, 2003 . (Unpublished)

Kamarul Asri Ibrahim, (2014) Methodology development of a flexible and operable energy integrated distillation columns. Applied Mechanics and Materials, 625 . pp. 490-493. ISSN 1660-9336

Kamis, Azmi and Ismail, Abdul Razak and Ismail, Issham and Khor, Siak Foo (2000) Ester-based drilling fluids toward improved filtration properties performance. Proceedings of 2nd International Conference on Advances in Strategic Technologies .

Kamsah, (2012) Development of vapor pressure in fr4-copper composite material during solder reflow process. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 116-123. ISSN 0094-243X

Kamyab, Hesam and Lim, Jeng Shiun and Khademi, Tayebeh and Ho, Wai Shin and Ahmad, Rahmalan and Hashim, Haslenda and Siong, Ho Chin and Keyvanfar, Ali and Lee, Chew Tin (2015) Greenhouse gas emission of organic waste composting: a case study of Universiti Teknologi Malaysia green campus flagship project. Jurnal Teknologi, 74 (4). pp. 113-117. ISSN 2180-3722

Karim, A. H. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Sidik, S. M. and Kamarudin, N. H. N. and Jusoh, R. and Jusoh, N. W. C. and Hameedc, B. H. (2012) Amino modified mesostructured silica nanoparticles for efficient adsorption of methylene blue. Journal of Colloid and Interface Science, 386 (1). pp. 307-314. ISSN 0021-9797

Kashinath, Shah Aznie Ariffin and Abdul Manan, Zainuddin and Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Design of green diesel from biofuels using computer aided technique. Computers & Chemical Engineering, 41 . 88-92  . ISSN 0098-1354

Kaviri, (2012) The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1141-1155. ISSN 0094-243X

Kelvin Tan, (2011) Online micro-controller based non-invasive blood pressure monitoring system (e-BPM). Jurnal Teknologi, 54 . pp. 403-423. ISSN 0127–9696

Khairiyah Mohd. Yusof, (2014) Determining the effect of an engineering overview assignment on first year Students. ASEE Annual Conference and Exposition, Conference Proceedings .

Khairul Sozana Nor Kamarudin, (2013) Adsorption performance of MCM-41 impregnated with amine for CO2 removal. Fuel Processing Technology, 106 . pp. 332-337. ISSN 0378-3820

Khairuldean, (2012) Evaluation of oleic acid as additive in automatic transmission fluid. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 914-919. ISSN 0094-243X

Khairuldean, (2012) Extreme pressure properties investigation of palm olein using four ball tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 920-927. ISSN 0094-243X

Khairur Rijal Jamaludin, (2011) An influence of a binder system to the rheological behaviour of the SS316L metal injection molding (MIM) feedstock. Advanced Materials Research, 264-26 . pp. 554-558. ISSN 1022-6680

Kian, Hwa Chan and Ee, Ting Wong and Irfan, Muhammad and Idris, Ani and Mohd. Yusof, Noordin (2015) Enhanced Cu(II) rejection and fouling reduction through fabrication of PEG-PES nanocomposite ultrafiltration membrane with PEG-coated cobalt doped iron oxide nanoparticle. Journal of the Taiwan Institute of Chemical Engineers, 47 . pp. 50-58. ISSN 1876-1070

Kiani, Hossein and Mahmoud Nasef, Mohamed and Javadi, Ali and Abouzari-Lotf, Ebrahim and Nemati, Firouzeh (2013) Highly refractive, transparent, and solution processable polyamides based on a noncoplanar ortho-substituted sulfonyl-bridged diacid monomer containing chlorine side groups. Journal of Polymer Research, 20 (9). ISSN 1022-9760

Kianpour, Ehsan and Che Sidik, Nor Azwadi and Mirza Bozorg, Mohsen Agha Seyyed (2013) Thermodynamic analysis of flow field at the end of combustor simulator. International Journal of Heat and Mass Transfer, 61 (1). pp. 389-396. ISSN 0017-9310

Kidam, Kamarizan and Hassin, M. H. (2008) Enhancement of inherent safety and accident prevention in chemical industry by reviewing past accidents. Journal of Chemical and Natural Resources Engineering, 2 (Special Edition). pp. 75-86. ISSN 1823-5255

Kidam, Kamarizan and Hurme, Markku (2012) Method for identifying contributors to chemical process accidents. Process Safety and Environmental Protection . ISSN 0957-5820

Kidam, Kamarizan and Hurme, Markku (2012) Origin of equipment design and operation errors. Journal of Loss Prevention in the Process Industries, 25 (6). 937–949. ISSN 0950-4230

KikuchiAkira, (2014) Activated carbon production from agricultural biomass using response surface method (RSM) for Cd (II) removal. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 59-64. ISSN 0127-9696

Kumar, Rajesha and Ismail, Ahmad Fauzi (2015) Fouling control on microfiltration/ultrafiltration membranes: effects of morphology, hydrophilicity, and charge. Journal of Applied Polymer Science, 132 (21). ISSN 0021-8995

Laftah W.A., (2012) Synthesis, optimization, characterization and agricultural field evaluation of polymer hydrogel composites based on poly acrylic acid and micro-fiber of oil palm empty fruit bunch. International Journal of Plastics Technology, 16 (2). pp. 166-181. ISSN 0972-656X

Lai Jau Choy, (2014) Mechanical, Thermal and Water Absorption Properties of Plasticised Sago Pith Waste. Fibers and Polymers, 15 (5). pp. 971-978. ISSN 1229-9197

Lam H.L., (2012) Green potential from palm biomass in Malaysia. Chemical Engineering Transactions, 29 . pp. 865-870. ISSN 1974-9791

Lau, Cher H. and Chua, Leesuan and Lee, Chewtin and Abd. Aziz, Ramlan Abdul (2015) Fractionation of rosmarinic acid from crude extract of Orthosiphon stamineus by solid phase extraction. Journal of Engineering Science and Technology, 10 . pp. 104-112. ISSN 1823-4690

Lau, W. J. and Ismail , Ahmad Fauzi (2010) Application of response surface methodology in pes/speek blend NF membrane for dyeing solution treatment. Membrane Water Treatment, 1 (1). pp. 49-60. ISSN 2005-8624

Lau, Woei-Jye and Ismail, A. F. (2009) Effect of SPEEK content on the morphological and electrical properties of PES/SPEEK blend nanofiltration membranes. Desalination, 249 (3). pp. 996-1005. ISSN 00119164

Lau Woei Jye, (2013) Adsorptive removal of PB(ii) from aqueous solution by novel PES/HMO ultrafiltration mixed matrix membrane. Separation and Purification Technology, 120 . pp. 59-68. ISSN 1383-5866

Lau Woei Jye, (2013) Car wash industry in Malaysia: treatment of car wash effluent using ultrafiltration and nanofiltration membranes. Separation and Purification Technology, 104 . pp. 26-31. ISSN 1383-5866

Lau Woei Jye, (2013) Fabrication and characterization of novel pes/fe-mn binary oxide uf mixed matrix membrane for adsorptive removal of as(iii) from contaminated water solution. Separation and Purification Technology, 118 . pp. 64-72. ISSN 1383-5866

Lau Woei Jye, (2013) Formation of thin film composite nanofiltration membrane: effect of polysulfone substrate characteristics. Desalination, 329 . pp. 9-18. ISSN 0011-9164

Lau Woei Jye, (2014) Investigation of submerged membrane photocatalytic reactor (sMPR) operating parameters during oily wastewater treatment process. Desalination, 353 . pp. 48-56. ISSN 0011-9164

Lau Woei Jye, (2014) Physicochemical study of polyvinylidene fluoride-Cloisite15A (R) composite membranes for membrane distillation application. RSC Advances, 4 (108). pp. 63367-63379. ISSN 2046-2069

Lau Woei Jye, (2013) Synthesis of thin film nanocomposite forward osmosis membrane with enhancement in water flux without sacrificing salt rejection. Desalination, 330 . pp. 90-99. ISSN 0011-9164

Lawal, Musa and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) A systematic method for cost-effective carbon emission reduction in buildings. Journal of Applied Sciences, 12 (11). pp. 1186-1190. ISSN 1812-5654

Lee, Kha Ling and Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza (2008) Pervaporation of ethanol-water mixture using PVA zeolite-clay membranes. Jurnal Teknologi (49F). pp. 167-177. ISSN 0127-9696

Lee, Suan Chua and Sarmidi, Mohamad Roji (2006) Effect of solvent and initial water content on (R, S)-1-phenylethanol resolution. Enzyme and Microbial Technology, 38 (3-4). pp. 551-556. ISSN 0141-0229

Lee, C. T. and Ismail, M. N. and Razali, F. and Muhamad, I. I. and Sarmidi, M. R. and Khamis, A. K. (2008) Application of effective microorganisms on soil and maize. Journal of Chemical & Natural Resources Engineering, 2 . pp. 1-13. ISSN 1823-5255

Lee, Lin Zhi and Ahmad Zaini, Muhammad Abbas (2015) Potassium carbonate-treated palm kernel shell adsorbent for congo red removal from water. Jurnal Teknologi, 75 (1). pp. 233-239. ISSN 0127-9696

Lee, Suan Chua and Abdul Rahaman, Norul Liza and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2012) Multi-elemental composition and physical properties of honey samples from Malaysia. Food Chemistry, 135 (3). pp. 880-887. ISSN 0308-8146

Lee Chew Tin, (2014) Effects of nitrogen source on enhancing growth conditions of green algae to produce higher lipid. Desalination and Water Treatment, 52 (19-21). pp. 3579-3584. ISSN 1944-3986

Lee Chew Tin, (2014) Optimal process network for municipal solid waste management in Iskandar Malaysia. Journal of Cleaner Production, 71 . pp. 48-58. ISSN 0959-6526

Lee, Chew Tin (2002) The influence of mixing on lysozyme renaturation during refolding in an oscillatory flow and a stirred-tank reactor. Chemical Engineering Science, Volume 57, Issue 10 (10). pp. 1679-1684.

Lee, CT and Mackley, MR and Stonestreet, P and Middelberg, APJ (2001) Protein refolding in an oscillatory flow reactor. Biotechnology Letter, 23 . pp. 1899-1901.

Leny Yuliati, (2013) Liquid-gas boundary catalysis by using gold/polystyrene-coated hollow titania. Journal of Colloid and Interface Science, 394 . pp. 490-497. ISSN 0021-9797

Liew W.H., (2012) Fuzzy optimization for screening of sustainable chemical reaction pathways. Chemical Engineering Transactions, 29 . pp. 529-534. ISSN 1974-9791

Lim, Chee Siang and Abd. Manan, Zainuddin and Sarmidi, Mohamad Roji (2003) Simulation modeling of the phase behavior of palm oil-supercritical carbon dioxide. JAOCS, Journal of the American Oil Chemists' Society, 80 (11). pp. 1147-1156. ISSN 1558-9331

Lim, J. W. and Hassan, A. and Rahmat, A. R. and Wahit, M. U. (2006) Rubber-Toughened Polypropylene Nanocomposite: Effect of Polyethylene Octene Copolymer on Mechanical Properties and Phase Morphology. Journal of Applied Polymer Science, 99 (6). pp. 3441-3450. ISSN 1097-4628

Lim, Wan Piang and Ahmad, Arshad (2002) Mathematical Modelling And Simulation Of Heat Dispersion Due To Fire And Explosion. Jurnal Teknologi F (37F). pp. 15-26. ISSN 0127-9696

Ling, Lay Pee and Leow, Heng Fatt and Sarmidi, Mohamad Roji (2002) Citric acid concentration by electrodialysis: Ion and water transport modelling. Journal of Membrane Science, 199 (1-2). pp. 59-67. ISSN 0376-7388

Lingli, Deng and Cheng, Kian Kai and Jiyang, Dong and Julian, L. Griffin and Zhong, Chen (2012) Non-negative principal component analysis for NMR-based metabolomic data analysis. Chemometrics and Intelligent Laboratory Systems, 118 . pp. 51-61. ISSN 0169-7439

Liza Md. Salleh, (2014) Antioxidant activity and total phenolic contents in methanol extracts from Swietenia mahagoni and andrographis paniculata. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 51-53. ISSN 0127-9696

Liza Md. Salleh, (2014) Determination of supercritical carbon dioxide extraction parameters for quercus infectoria galls and the effects on extraction yield and antioxidant activity. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 1-4. ISSN 0127-9696

Liza Md. Salleh, (2014) Effect of different extraction techniques on total phenolic content and antioxidant activity of quercus infectoria galls. International Food Research Journal, 21 (3). pp. 1039-1043. ISSN 2231-7546

Liza Md. Salleh, (2014) Effect of solvent extraction on antioxidant and antibacterial activities from quercus infectoria (Manjakani). International Food Research Journal, 21 (3). pp. 1031-1037. ISSN 2231-7546

Liza Md. Salleh, (2014) Effect of supercritical carbon dioxide flow rate on extraction yield, antioxidant properties and morphological changes of Quercus infectoria galls. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 35-38. ISSN 0127-9696

Liza Md. Salleh, (2014) Optimization of supercritical Co2 extraction of Swietenia mahagoni seed by response surface methodology. Jurnal Teknologi (Sciences and Engineering), 67 (1). pp. 15-20. ISSN 0127-9696

Low K.O., (2012) Optimization of a bacillus sp signal peptide for improved recombinant protein secretion and cell viability in escherichia coli is there an optimal signal peptide design? Bioengineered Bugs, 3 (6). pp. 334-338. ISSN 1949-1018

Lynd, Lee Rybeck and Abdul Aziz, Ramlan and de Brito Cruz, Carlos Henrique and Abel Chimphango, Annie Fabian and Cortez, Luis Augusto Barbosa and Faaij, Andre and Greene, Nathanael and Keller, Martin and Osseweijer, Patricia and Richard, Tom L. and Sheehan, John and Chugh, Archana and van der Wielen, Luuk and Woods, Jeremy and van Zyl, Willem Heber (2011) A global conversation about energy from biomass: the continental conventions of the global sustainable bioenergy project. Interface Focus, 1 (2). pp. 271-279. ISSN 2042-8901

M., Mahadevan and Sim, W. K. and Ling, L. P. and M. Y., Zainal Abidin and S., Mohamad Roji (2002) Penyediaan dan pencirian membran pertukaran anion bagi proses elektrodialisis. Jurnal Teknologi F (36F). pp. 43-54. ISSN 0127-9696

M., Rahbari-Sisakht and Ismail, Ahmad Fauzi and D., Rana and T., Matsuura (2012) A novel surface modified polyvinylidene fluoride hollow fiber membrane contactor for CO2 absorption. Journal of Membrane Science, 415-41 . pp. 221-228. ISSN 0376-7388

M. Jawaid, (2012) Bi-layer hybrid biocomposites : chemical resistant and physical properties. Bioresources, 7 (2). pp. 2344-2355. ISSN 1930-2126

M. N. A., Mohd Norddin and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. and Tabe-Mohammadi, A. (2008) Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule. Journal of Membrane Science, 323 . pp. 404-413. ISSN 0376-7388

M. Othman, Razib and Deris, Safaai and Md. IIlias, Rosli (2008) A genetic similarity algorithm for searching the Gene Ontology terms and annotating anonymous protein sequences. Journal of Biomedical Informatics , 41 (1). pp. 65-81. ISSN 1532-0464

Mahamad, Mohammed Nabil and Zaini, M. A. A. and Zakaria, Zainul Akmar (2015) Preparation and characterization of activated carbon from pineapple waste biomass for dye removal. International Biodeterioration and Biodegradation, 102 . pp. 274-280. ISSN 0964-8305

Mahani A.Z. Abidin, (2011) Recovery of gold (iii) from an aqueous solution onto a durio zibethinus husk. Biochemical Engineering Journal, 54 . pp. 124-131. ISSN 1369-703X

Mahat, Naji Arafat Rafat and Meor Ahmad, Zainal Abidin and Wahab, Roswanira Abdul (2015) Presence of faecal coliforms and selected heavy metals in ice cubes from food outlets in Taman Universiti, Johor Bahru, Malaysia. Tropical Biomedicine, 32 (3). pp. 471-477. ISSN 0127-5720

Mahdi, Taha H. and Ahmad, Arshad and Ripin, Adnan and Nasef, Mohamed Mahmoud (2015) Separation of azeotropic mixture using multi-stage ultrasound-assisted flash distillation. Chemical Product and Process Modeling, 10 (4). pp. 237-242. ISSN 2194-6159

Maheza Irna Mohamad Salim, (2013) Measurement of bioelectric and acoustic profile of breast tissue using hybrid magnetoacoustic method for cancer detection. Medical & Biological Engineering & Computing, 51 (4). pp. 459-466. ISSN 0140-0118

Mahmood, N. A. B. N. and Biemans-Oldehinkel, E. and Poolman, B. (2009) Engineering of ion sensing by the cystathionine beta-synthase module of the ABC transporter OpuA. Journal of Biological Chemistry, 284 (21). pp. 14368-14376. ISSN 0021-9258

Mahmoud El-Sayed Nasef, Mohamed and Yahaya, Abdul Hamid (2009) Adsorption of some heavy metal ions from aqueous solutions on Nafion 117 membrane. Desalination, 49 (2). pp. 677-681. ISSN 0011-9164

Mailin, M. and Firdausi, R. (2007) The kinetics of phenol degradation by immobilized pseudomonas sp in a repeated-batch process. Malaysian Apllied Biology, 36 (1). pp. 73-78. ISSN 0126-8643

Majid, R. A. and Syed Mahamud, S. N. (2008) Polyurethane-palm oil empty fruit bunch composites. Journal of Chemical and Natural Resources Engineering, 2 . pp. 67-76. ISSN 1823-5255

Majid, Z. A. and Mohsin, R. and Yusof, M. Z. (2011) Erosive wear of rural gas pipes due to high velocity jet impact : physical examination and experimental study. Jurnal Teknologi, 56 (1). pp. 1-25. ISSN 0127–9696

Majid, Z. A. and Mohsin, R. and Yusof, M. Z. (2011) Erosive wear of rural gas pipes due to high velocity jet impact: computer simulation study. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 27-52. ISSN 0127-9696

Majidnia, Zohreh and Idris, Ani (2015) Evaluation of cesium removal from radioactive waste water using maghemite PVA-alginate beads. Chemical Engineering Journal, 262 . pp. 372-382. ISSN 1385-8947

Majidnia, Zohreh and Idris, Ani (2015) Removal of barium from radioactive aqueous solution by PVA-alginate encapsulated titanium oxide using sunlight and other light types. RSC Advances, 5 (78). pp. 63588-63595. ISSN 2046-2069

Maketab Mohamed, (2014) Ceramic industry wastewater treatment by rhizofiltration system - Application of water hyacinth bioremediation. IIOAB Journal, 5 (1). pp. 6-14. ISSN 0976-3104

Manan, Z. A. and Tea, S. Y. and Alwi, S. R. W. (2009) A new technique for simultaneous water and energy minimisation in process plant. Chemical Engineering Research & Design, 87 (11A). pp. 1509-1519. ISSN 1509-1519

Manan, Zainuddin A. and Siang, Lim C. and Mustapa, Ana N. (2009) Development of a new process for palm oil refining based on supercritical fluid extraction technology. Industrial & Engineering Chemistry Research, 48 (11). pp. 5420-5426. ISSN 0888-5885

Manan Z.A., (2012) Holistic and versatile process integration framework for maximising resource efficiency. Chemical Engineering Transactions, 29 . pp. 55-60. ISSN 1974-9791

Mansor, Azmi Fadziyana and Mohidem, Nur Atikah and Wan Mohd. Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Endud, Salasiah and Mat, Hanapi (2015) Preparation and characterization of in situ entrapment of laccase in silica microparticles via an ambient drying procedure. Journal of Sol-Gel Science and Technology, 75 (2). pp. 323-335. ISSN 0928-0707

Mansourizadeh, A. and Ismail, A. F. (2009) Hollow fiber gas–liquid membrane contactors for acid gas capture : A review. Journal of Hazardous Materials, 171 (1-3). pp. 38-53. ISSN 03043894

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2008) Effects of fabrication parameters on the morphology of porous polysulfone hollow fiber membranes. Jurnal Teknologi, 49F . pp. 81-89. ISSN 0127-9696

Mat, Ramli and Amin, Nor Aishah Saidina and Ramli, Zainab and W. Abu Bakar, W. Azelee Reactivity Of Incoporated Copper In Boronzsm-5 Zeolite For Methane Conversion To Higher Hydrocarbons. methane . pp. 1-10. (Unpublished)

Mat, Ramli and Ali, A. (2008) Catalytic studies of Boron-HZSM-5 zeolite for methane conversion to higher hydrocarbons. Journal of Chemical and Natural Resources Engineering, 2 . pp. 146-152. ISSN 1823-5255

Mat R., (2012) Solid catalysts and their application in biodiesel production. Bulletin of Chemical Reaction Engineering and Catalysis, 7 (2). pp. 142-149. ISSN 1978-2993

Mat Uzir Wahit, (2014) Bionanocomposites of regenerated cellulose/zeolite prepared using environmentally benign ionic liquid solvent. Carbohydrate Polymers, 106 . pp. 326-334. ISSN 0144-8617

Mat Uzir Wahit, (2014) Characterization of bio regenerated cellulose/sepiolite nanocomposite films prepared via ionic liquid. Polymer Testing, 33 (1). pp. 121-130. ISSN 0142-9418

Mat Uzir Wahit, (2014) Development of regenerated cellulose/halloysites nanocomposites via ionic liquids. Carbohydrate Polymers, 99 . pp. 91-97. ISSN 0144-8617

Mat Uzir Wahit, (2014) Impact test and bioactivity properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). Applied Mechanics and Materials, 446-44 . pp. 1129-1133. ISSN 1660-9336

Mat Uzir Wahit, (2013) Maleated high density polyethylene compatibilized high density polyethylene/hydroxyapatite composites for biomedical applications: properties and characterization. Polymer-Plastics Technology and Engineering, 52 (8). pp. 774-782. ISSN 0360-2559

Mat Uzir Wahit, (2014) Mechanical and morphology properties of feather fiber composite for dental post application. Malaysian Journal of Analytical Sciences, 18 (2). pp. 368-375. ISSN 1394-2506

Mat Uzir Wahit, (2014) Mechanical and thermal properties of recycled poly(ethylene terephthalate) reinforced newspaper fiber composites. Fibers and Polymers, 15 (7). pp. 1531-1538. ISSN 1229-9197

Mat Uzir Wahit, (2014) Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites. Materials & Design, 59 . pp. 279-286. ISSN 0261-3069

Mat Uzir Wahit, (2014) Physical, mechanical and oxygen barrier properties of antimicrobial active packaging based on LDPE film incorporated with sorbic acid. Advances in Environmental Biology, 8 (8 SPEC). pp. 2748-2752. ISSN 1998-1066

Mat Uzir Wahit, (2014) Preparation and characterization of organically modified montmorillonite-filled high density polyethylene/hydroxyapatite nanocomposites for biomedical applications. Polymer - Plastics Technology and Engineering, 53 (8). pp. 790-800. ISSN 1525-6111

Mat Uzir Wahit, (2013) Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends. Journal of Polymer Engineering, 33 (7). pp. 599-614. ISSN 0334-6447

Mazatusziha Ahmad, (2011) Influence of processing aids and hydroxypatite as fillers on flow behaviour and mechanical properties of ultra high molecular weight polyethylene/high density polyethylene composites. Key Engineering Materials, 471-47 . pp. 827-832. ISSN 1013-9826

Mazlan, Nur Shima Fadhilah and Ahmad Khairudin, Nurul Bahiyah (2013) Binding mode study of β-glucosidase b from p.Polymyxca with cellobiose and laminaribiose. International Journal of Chemical Engineering and Applications, 4 (6). pp. 410-414. ISSN 2010-0221

Mazlan Abdul Wahid, (2013) Numerical simulation of entropy generation in hydrogen enriched swirl stabilized combustion. CFD Letters, 5 (1-2). pp. 1-5. ISSN 2180-1363

Mazlan Hashim, (2014) An approach for quantification of submerged seagrass biomass in shallow turbid coastal waters. International Geoscience and Remote Sensing Symposium (IGARSS) . pp. 4439-4442.

Mazura Jusoh, (2014) Effect of coolant temperature on progressive freeze concentration of refined, bleached and deodorised palm oil. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 23-27. ISSN 0127-9696

Mazura Jusoh, (2014) Effect of flowrate and circulation time on fractionation of refined bleached and deodorised palm oil using progressive freeze concentration method. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 117-122. ISSN 2180-3722

Mazura Jusoh, (2014) Enhancement of sugar content through progressive freeze concentration: effect of initial concentration. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 19-22. ISSN 0127-9696

Md Abbas Ali, (2014) Effect of palm olein addition on the quality characteristics of sunflower oil during deep fat frying. ACTA Alimentaria, 43 (2). pp. 288-296. ISSN 0139-3006

Md Din, (2012) Performance of low pressure reverse osmosis membrane treating synthetic natural organic matter (NOM) and endocrine disrupting chemical (EDC). IIOAB Journal, 3 (2). pp. 1-6. ISSN 0976-3104

Md Yusof, Aminah and Chia, C.H. and Wood, Abdul Khalik (2007) Speciation of Cr(III) and Cr(VI) in surface waters with a Chelex-100 resin column and their quantitative determination using inductively coupled plasma mass spectrometry and instrumental neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 273 (3). pp. 533-538. ISSN 0236-5731

Md Yusof, Aminah and Rahman, M.M. and Wood, Abdul Khalik (2007) Adsorption of some toxic elements from water samples on modified activated carbon, activated carbon and red soil using neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 271 (1). pp. 191-197. ISSN 0236-5731

Md Yusof, Aminah and Rahman, M.M. and Wood, Abdul Khalik (2004) Speciation of some trace elements in water samples after preconcentration on activated carbon by neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 259 (3). pp. 479-484. ISSN 0236-5731

Md Yusof, Aminah and Yanta, N.F. and Wood, Abdul Khalik (2004) The use of bivalves as bio-indicators in the assessment of marine pollution along a coastal area. Journal of Radioanalytical and Nuclear Chemistry, 259 (1). pp. 119-127. ISSN 0236-5731

Md. Abbas Ali, (2014) Development of HPLC fingerprint analysis of traditional diabetes herbal Jamu Diabetes plant materials. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 83-88. ISSN 2180-3722

Md. Abbas Ali, (2014) Effect of microwave heating on oxidative degradation of sunflower oil in the presence of palm olein. Sains Malaysiana, 43 (8). pp. 1189-1195. ISSN 0126-6039

Md. Illias, Rosli and Alias, Nadiawati and Abdul Murad, Nor Muhammad Mahadi and Abu Bakar, Farah Diba and Nik Mahmood, Nik Azmi (2007) Expression and characterization of Trichoderma virens UKM-1 endochitinas in Escherichia coli. Springer, 25 (4). pp. 561-572.

Md. Illias, Rosli and Hassan, Osman and A. Rauf, Zulfikri (2006) Properties of commercial CGTase in enzymatic production of cyclodextrin from ungelatinized sago starch. Sains Indonesia, 11 (1). pp. 14-23. ISSN 0853-1412

Md. Illias, Rosli and Ooi, Seok Wei and Idris, Ahmad Kamal and Wan Abdul Rahman, Wan Aizan (2001) Isolation and characterization of halotolerant aerobic bacteria from oil reservoir. Jurnal Teknologi C (35C). pp. 1-10. ISSN 0127-9696

Md. Illias, Rosli and Reid, Graeme A. and A. Wahab, Nadzarah (2001) Comparison Of The Amino Acid Sequence Of L-Mandelate Dehydrogenase From Rhodotorula Graminis With Other L-2-Hydroxyacid Dehydrogenase Enzyme And Its Primary Structure Prediction. Jurnal Teknologi C (34C). pp. 25-34. ISSN 0127-9696

Md. Kasmani, Rafiziana and Andrews, G. E. and Phylaktou, H. N. (2010) The influence of vessel volume and equivalence ratio in vented gas explosion. Chemical Engineering Transactions, 19 . pp. 463-468. ISSN 1974-9791

Md. Kasmani, Rafiziana and Andrews, G. E. and Phylaktou, H. N. (2013) Experimental study on vented gas explosion in a cylindrical vessel with a vent duct. Process Safety and Environmental Protection, 91 (4).  245-252. ISSN 0957-5820

Md. Noor, Norhazilan and Yahaya, Nordin and Othman, Siti Rabe'ah (2008) The effect of extreme corrosion defect on pipeline remaining life-time. Malaysian Journal of Civil Engineering, 20 (1). pp. 47-57. ISSN 1823-7843

Md. Yassin, A. A. and Ghazali, M. N. (2008) Using low sulfate seawater during water injection to avoid scaling problem. Journal of Chemical & Natural Resources Engineering, 2 . pp. 91-99. ISSN 1823-5255

Md. Zamani, Siti Haizum and Yahya, Norshafika and Zakaria, Zaki Yamani and Jusoh, Mazura (2015) Fractional freezing of ethanol and water mixture. Jurnal Teknologi, 74 (7). pp. 49-52. ISSN 2180-3722

Mel, Maizirwan and Sarmidi, Mohd. Roji and Abdul Aziz, Ramlan (2002) The growth rate of haemophilus paragallinarum profile in shake flask fermentation ; determination [substrate] critical. Jurnal Teknologi F (36F). pp. 55-60. ISSN 0127-9696

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2009) Solubility of common oil field scales of injection water and high-barium concentration and high-salinity formation water. Jurnal Teknologi, 50 (F). pp. 67-77. ISSN 2180-3722

Merdhah, Amer and Mohd. Yassin, Abu Azam (2007) Barium sulfate scale formation in oil reservoir during water injection at high-barium formation water. Journal of Applied Sciences, 7 (17). pp. 2393-2403. ISSN 1812-5654 (Print)

Merdhah, Amer and Mohd. Yassin, Abu Azam (2007) Scale formation in oil reservoir during water injection at high-salinity formation water. Journal of Applied Sciences, 7 (21). pp. 3198-3207. ISSN 1812-5654 (Print)

Mesri, Suhailysa and Ab. Wahab, Roswanira and Huyop, Fahrul (2009) Degradation of 3-chloropropionic acid (3CP) by pseudomonas sp B6P isolated from a rice paddy field. Annals of Microbiology, 59 (3). pp. 447-451. ISSN 1590-4261

Mimi Haryani Hashim, (2014) Health risk assessment of emissions from a coal-fired power plant using AERMOD modelling. Process Safety and Environmental Protection, 92 (5). p. 485. ISSN 0957-5820

Mimi Haryani Hashim, (2014) A heuristic framework for inherent occupational health assessment in chemical process design. Chemical Engineering Transactions, 39 . pp. 955-960. ISSN 1974-9791

Mimi Haryani Hassim, (2013) Artificial neural networks: applications in chemical engineering. Reviews In Chemical Engineering, 29 (4). pp. 205-239. ISSN 0167-8299

Mimi Haryani Hassim, (2014) Comparison of methods assessing environmental friendliness of petrochemical process design. Journal of Cleaner Production, 71 . pp. 110-117. ISSN 0959-6526

Mimi Haryani Hassim, (2013) Computer aided estimation of fugitive emission rates and occupational air concentration in process design. Chemical Engineering Research and Design, 91 (8). pp. 1373-1382. ISSN 0263-8762

Mimi Haryani Hassim, (2013) Correlation study of safety, health and environmental properties at inherent level: benzene synthesis routes. Chemical Engineering Transactions, 35 . pp. 811-816. ISSN 1974-9791

Mimi Haryani Hassim, (2014) Life cycle optimisation (LCO) of product systems with consideration of occupational fatalities. Process Safety and Environmental Protection, 92 (5). p. 405. ISSN 0957-5820

Mimi Haryani Hassim, (2014) Multi-objective design of industrial symbiosis in palm oil industry. Computer Aided Chemical Engineering, 34 . pp. 579-584. ISSN 1570-7946

Mimi Haryani Hassim, (2013) Screening of sustainable biodiesel production pathways during process research and development (r&d) stage using fuzzy optimization. Chemical Engineering Transactions, 35 . pp. 1075-1080. ISSN 1974-9791

Misi, Siti Eda Eliana and Wan Omar, Wan Nor Nadyaini and Saidina Amin, Nor Aishah (2010) Heterogeneous esterification of free fatty acid to biodiesel. Journal - The Institution of Engineers, Malaysia, 71 (3). pp. 35-45. ISSN 0126-513X

Misson, Mailin and Razali, Firdausi (2007) Immobilization of phenol degrader pseudomonas sp in repeated batch culture using bioceramic and sponge as support materials. Jurnal Teknologi (46F). pp. 51-59. ISSN 2180-3722

Mohamad, Nur Royhaila Oyhaila and Huyop, Fahrul Zaman and Aboul Enein, Hassan Y. and Mahata, Naji Arafat and Abdul Waha, Roswanira (2015) Response surface methodological approach for optimizing production of geranyl propionate catalysed by carbon nanotubes nanobioconjugates. Biotechnology and Biotechnological Equipment, 29 (4). pp. 732-739. ISSN 1310-2818

Mohamad, Rosfarizan and Mohamed, Mohd. Shamzi and Suhaili, Nurashikin and Mohd. Salleh , Madihah and Ariff, Arbakariya (2010) Kojic acid: applications and development of fermentation process for production. Biotechnology and Molecular Biology Reviews, 5 (2). pp. 24-37. ISSN 1538-2273

Mohamad, Z. and Ismail, H. and Thevy, R. Chantara (2008) Tensile properties and morphology of dynamic vulcanized ENR-5/EVA blends : different vulcanization system. Journal of Chemical and Natural Resources Engineering, 2 . pp. 91-98. ISSN 1823-5255

Mohamad, Zahari and Yahya, Wira Jazair (2012) Biofuels from an esterification of sludge palm oil as an alternative to residual oil. Advanced Materials Research, 512-5 . pp. 1858-1861. ISSN 1858-1861

Mohamad Ali Fulazzaky, (2013) Calculation of optimal gas retention time using a logarithmic equation applied to a bio-trickling filter reactor for formaldehyde removal from synthetic contaminated air. RSC Advances, 3 (15). pp. 5100-5107. ISSN 2046-2069

Mohamad Ali Fulazzaky, (2013) Evaluation of gas retention time effects on the bio-trickling filter reactor performance for treating air contaminated with formaldehyde. RSC Advances, 3 (38). pp. 17462-17468. ISSN 2046-2069

Mohamad Ibrahim, M. N. and Marliana, M. A. (2005) Tanin Daripada Serbuk Tandan Sawit Kosong Dan Aplikasinya Dalam Industri Petroleum. Jurnal Teknologi F, 42 (F). pp. 107-120. ISSN 0127-9696

Mohamad N., (2011) Precast lightweight foamed concrete sandwich panel (PLFP) tested under axial load: prelimiry results. Advanced Materials Research, 250-25 . pp. 1153-1162. ISSN 1022-6680

Mohamad Roji Sarmidi, (2014) Precipitation of rotenoids resin extracted from Derris elliptica roots by means of clarifying agents. Advances in Environmental Biology, 8 (2). pp. 441-444. ISSN 1998-1066

Mohamad Roji Sarmidi, (2014) A preliminary study of rotenone exhaustive extraction kinetic from Derris elliptica dried roots using normal soaking extraction (NSE) method. Advances in Environmental Biology, 8 (4). pp. 910-915. ISSN 1998-1066

Mohamad Roji Sarmidi, (2013) Protective effects of a ficus deltoidea (mas cotek) extract against uvb-induced photoageing in skin cells. Biotechnology and Bioprocess Engineering, 18 (1). pp. 185-193. ISSN 1226-8372

Mohamed Mahmoud El-Sayed Nasef, (2014) Electrospinning of nylon-6,6 solutions into nanofibers: rheology and morphology relationships. Chinese Journal of Polymer Science, 32 (6). pp. 793-804. ISSN 0256-7679

Mohamed Mahmoud El-Sayed Nasef, (2014) Modeling and optimization aspects of radiation induced grafting of 4-vinylpyridene onto partially fluorinated films. Radiation Physics and Chemistry, 94 (1). pp. 123-128. ISSN 0969-806X

Mohamed Mahmoud El-Sayed Nasef, (2014) Novel polyoxadiazoles with non-coplanar ortho-linked structures as highly CO2 permselective membranes. RSC Advances, 4 (35). pp. 17993-18002. ISSN 2046-2069

Mohamed Mahmoud El-Sayed Nasef, (2014) Parametric investigations on proton conducting membrane by radiation induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) and phosphoric acid doping. RADIOCHIMICA ACTA, 102 (4). pp. 351-362. ISSN 0033-8230

Mohamed Mahmoud, Nasef and Saidi, Hamdani and Mohd Nor, Hussin and M. Dahlan, Khairul Zaman and Kamaruddin, Hashim (1999) Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. I. preparation and characterization of the graft copolymer. Journal of Applied Polymer Science, 73 . pp. 2095-2102.

Mohamed Noor, Norhayati and Abd. Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan (2013) The effect of virgin coconut oil loaded solid lipid particles (VCO-SLPs) on skin hydration and skin elasticity. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 39-43. ISSN E-ISSN 2180-3722

Mohamed Yusof, Nor Ashikin (2013) Malaysia as biotechnology producer: characters of local biotechnology industry. Global Journal for Research Analysis, 2 (9). pp. 8-9. ISSN 2277-8160

Mohammad Azmin, Siti NuurulHuda and Yunus, Nor Alafiza and Mustaffa, Azizul Azri and Wan Alwi, Sharifah Rafidah and Chua, Leesuan (2015) A framework for solvent selection based on herbal extraction process design. Journal of Engineering Science and Technology, 10 . pp. 25-34. ISSN 1823-4690

Mohammad Fauzi, Ahmad Hafiidz and Saidina Amin, Nor Aishah (2012) An overview of ionic liquids as solvents in biodiesel synthesis. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5770-5786. ISSN 1364-0321

Mohammad Rozali, Nor Erniza and Wan Alwi, Sharifah Rafidah and Ho, Wai Shin and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2015) Expansion of a diesel plant into a hybrid power system using power pinch analysis. Chemical Engineering Transactions, 45 . pp. 343-348. ISSN 2283-9216

Mohammad Zainol, Muzakkir and Mohammed Yussuf, Mohd. Asmadi and Saidina Amin, Nor Aishah (2015) Impregnation of magnetic particles on oil palm shell activated carbon for removal of heavy metal ions from aqueous solution. Jurnal Teknologi, 72 (1). pp. 7-11. ISSN 2180-3722

Mohammed, H. A. and Hasan, Husam A. and Wahid, M. A. (2013) Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts. International Communications In Heat and Mass Transfer, 40 . pp. 36-46. ISSN 0735-1933

Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza and Tan, Gi Gi (2008) Pervaporation of ethanol-water using chitosan-clay composite membrane. Jurnal Teknologi, F (49). pp. 179-188. ISSN 0127-9696

Mohd Tabi, Amal Nafissa and Ahmad Zakil, Fathie and Mohd Fauzai, Wan Nur Fauzan and Ali, Noorhalieza and Hassan, Onn (2008) The usage of empty fruit bunch (EFB) and palm pressed fibre (PPF) as substrates for the cultivation of pleurotus ostreatus. Jurnal Teknologi, F (49). pp. 189-196. ISSN 0127-9696

Mohd Yusof, Abdul Halim and Ulbricht, Mathias (2006) Effects of photo-initiation and monomer composition onto performance of graft-copolymer based membrane adsorbers. Desalination, 200 (1-3). pp. 462-463. ISSN 0011-9164

Mohd-Ghazali, (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1320-1324. ISSN 0094-243X

Mohd-Norddin, M. N. A and Ismail, Ahmad Fauzi and Matsuura, Takeshi and D., Rana (2008) Charged surface modifying macromolecules in polymer electrolyte membrane. Jurnal Teknologi, 49F . pp. 91-102. ISSN 0127-9696

Mohd-Setapar, (2012) Kinetic study of antibiotic by reverse micelle extraction technique. Journal Of The Taiwan Institute Of Chemical Engineers, 43 (5). pp. 685-695. ISSN 1876-1070

Mohd-Setapar, S.H. and Wakeman, R.J. and Tarleton, E.S. (2009) Penicillin G solubilisation into AOT reverse micelles. Chemical Engineering Research and Design, 87 (6). pp. 833-842. ISSN 02638762

Mohd. Ariffin Abu Hassan, (2014) Application of a packed column air stripper in the removal of volatile organic compounds from wastewater. Reviews in Chemical Engineering, 30 (5). pp. 431-451. ISSN 0167-8299

Mohd. Ariffin Abu Hassan, (2014) Fenton and photo-fenton oxidation of sulfidic spent caustic: a comparative study based on statistical analysis. Environmental Engineering and Management Journal, 13 (3). pp. 531-538. ISSN 1582-9596

Mohd. Ariffin Abu Hassan, (2014) Optimization of nickel removal from electroless plating industry wastewater using response surface methodology. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 33-40. ISSN 2180-3722

Mohd. Arshad, Azmi and Othman, Ariff and Abdul Razak, Mohd. Razif and Abu Bakar, Mohamad (1993) Aliran dua fasa di bahagian mendatar telaga. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-7.

Mohd. Azizi, C. Y. and Ismail, N. A. (2008) Optimization of removing of free fatty acid content on Jatropha curcas l. seed oil using experimental design. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 36-48. ISSN 1823-5255

Mohd. Azizi Che Yunus, (2014) Efficacy of biological activity of andrographis paniculata extracted by using supercritical carbon dioxide (Sc-CO2) extraction. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 61-64. ISSN 0127-9696

Mohd. Azizi Che Yunus, (2014) Extraction of virgin coconut (Cocos nucifera) oil using supercritical fluid carbon dioxide. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 11-15. ISSN 0127-9696

Mohd. Azizi Che Yunus, (2014) Formulation of green varnish from ecological friendly material for the development of offset printing ink. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 65-68. ISSN 0127-9696

Mohd. Azraai Kassim, (2014) Conventional methods and emerging wastewater polishing technologies for palm oil mill effluent treatment: a review. Journal of Environmental Management, 149 . pp. 222-235. ISSN 0301-4797

Mohd. Azraai Kassim, (2013) Radioactive decontamination of water by membrane processes - a review. Desalination, 321 . pp. 77-92. ISSN 0011-9164

Mohd. Fauzi, Noor Akhmazillah and Sarmidi, Mohamad Roji (2010) Storage stability of a-tocopherol extracted from heated and unheated palm oil mesocarp. Journal of Science and Technology, 2 (1). pp. 111-120. ISSN 2229-8460

Mohd. Fauzi , Noor Akhmazillah and Sarmidiba, Mohamad Roji (2010) Extraction of heat treated palm oil and their stability on ß-carotene during storage. Journal of Science and Technology, 2 (1). pp. 45-54. ISSN 2229-8460

Mohd. Ghazali Mohd. Nawawi, (2014) Composite chitosan membranes for the separation of methanol/methyl tert-butyl ether mixtures. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 23-30. ISSN 0127-9696

Mohd. Hani, Mohamed Khalil (2009) A two-step biodiesel production from waste cooking oil : optimization of pre-treatment step. Journal of Applied Sciences , 9 (17). pp. 3098-3103. ISSN 18125654

Mohd. Jaafar, Mohammad Nazri and Eldrainy, Yehia A. and Asril, Muhammad Hanafi (2011) Experimental investigation of spray characteristics of refined bleached and deodorized palm oil and diesel blends using phase doppler particle alyzer. International Journal of Physical Sciences, 6 (29). pp. 6674-6680. ISSN 1992-1950

Mohd. Johari Kamaruddin, (2014) Dielectric relaxation process and microwave heating mechanism in e- Caprolactone as a function of frequency and temperature. Advanced Materials Research, 931-93 . pp. 205-209. ISSN 1022-6680

Mohd. Johari Kamarudin, (2014) Dielectric properties for the ring opening polymerisation of epsilon- caprolactone. Applied Mechanics and Materials, 493 . pp. 621-627. ISSN 1660-9336

Mohd. Jusoh, Y. M. (2008) Effects of baking temperature and time on open bread properties. Journal of Chemical & Natural Resources Engineering, 2 . pp. 21-30. ISSN 1823-5255

Mohd. Jusoh, Y. M. and Chin, N. L. and Yusof, Y. A. and Abdul Rahman, R. (2009) Bread crust thickness measurement using digital imaging and L a b colour system. Journal of Food Engineering, 94 (3-4). pp. 366-371. ISSN 02608774

Mohd. Kamaruddin Abd Hamid, (2013) Flexible and operable heat exchanger networks. Chemical Engineering Transactions, 32 . pp. 1297-1302. ISSN 1974-9791

Mohd. Kamaruddin Abdul Hamid, (2014) Model-based analysis of the impact of the distributor on the hydrodynamic performance of industrial polydisperse gas phase fluidized bed polymerization reactors. Powder Technology, 267 . pp. 398-411. ISSN 0032-5910

Mohd. Nasir, Nur Haziqah and Zaini, M. A. A. and Mohd. Setapar, Siti Hamidah and Hassan, Hashim (2015) Removal of methylene blue and copper (ii) by oil palm empty fruit bunch sorbents. Jurnal Teknologi, 74 (7). pp. 107-110. ISSN 0127-9696

Mohd. Nawawi, M. G. and Othman, N. and Sadikin, A. N. and Khalid, S. S. and Yusof, N. (2008) Development of empty fruit bunch filter with addition of chitosan for pre-treatment of palm oil mill effluent. Journal of Chemical and Natural Resources Engineering, 2 . pp. 8-16. ISSN 1823-5255

Mohd. Nawawi, Mohd. Ghazali and Hassan, Hashim (2003) Pervaporation separation of isopropanol-water mixtures using crosslinked chitosan membranes. Jurnal Teknologi Siri Khas A (39A). pp. 55-64. ISSN 0127-9696

Mohd. Nawi, Wan Norlinda Roshana and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Jirí, Jaromír Klemeš (2015) A new algebraic pinch analysis tool for optimising CO2capture, utilisation and storage. Chemical Engineering Transactions, 45 . pp. 265-270. ISSN 2283-9216

Mohd. Nawi Derahman, (2013) Computational calculation of gas and water properties: part 1. Petroleum Science and Technology, 31 (7). pp. 712-720. ISSN 1091-6466

Mohd. Nawi Derahman, (2013) Computational calculation of gas and water properties: part 2. Petroleum Science and Technology, 31 (8). pp. 783-790. ISSN 1091-6466

Mohd. Norddin, Muhammad Noorul Anam and Rana, D. and Ismail, Ahmad Fauzi and Matsuura, T. and Sudirman, R. and Jaafar, J. (2012) Study on synthesis and physical properties of charged surface modifying macromolecules with different end-capping materials for membrane applications. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2016-2023. ISSN 1226-086X

Mohd. Rozainee Taib, (2014) Enzymatic inactivation of oil palm fruits: comparison of microwave irradiation and steam bath process. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 55-60. ISSN 0012-79696

Mohd. Rozainee Taib, (2014) Measurement of PCDD/Fs emissions from a coal-fired power plant in Malaysia and establishment of emission factors. Atmospheric Pollution Research, 5 (3). pp. 388-397. ISSN 1309-1042

Mohd. Said, Farhan and Sarmidi, Mohd. Roji and Chew, Tin Lee and Hassan, Zulkafli (2010) Spray drying of lactobacillus bulgaricus: optimization of combined heat and salt pre-treatments. Journal UMP Engineering and Computer Science, 2 . pp. 23-34. ISSN 1985-5176

Mohd. Setapar, Siti Hamidah and S., W. Lau and C., Yong and P., L. Chen and Shanjingm, Y. and Mat, Hanapi (2008) Partitioning behaviour of selected antibiotics in organic solvents. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 100-112. ISSN 1823-5255

Mohd. Setapar, Siti Hamidah and Shiew, Wei Lau and Toorisaka, Eiichi and Goto, Masahiro and Furusaki, Shintaro and Mat, Hanapi (2008) Reverse micelle extraction of antibiotics. Jurnal Teknologi F (49F). pp. 69-79. ISSN 0127-9696

Mohd. Setapar, Siti Hamidah and Wakeman, R. J. and Tarleton, E. S. (2008) Penicillin G solubilisation into AOT reserve micelles. Chemical Engineering Research and Design, 87 (6). pp. 833-842. ISSN 0263-8762

Mohd. Shahir Shamsir, (2013) Sequence and structural investigation of a novel psychrophilic alpha-amylase from glaciozyma antarctica pi12 for cold-adaptation analysis. Journal of Molecular Modeling, 19 (8). pp. 3369-3383. ISSN 1610-2940

Mohd. Shahir Shamsir Omar, (2013) Molecular modelling and functional studies of the non-stereospecific ?-Haloalkanoic acid dehalogenase (dehe) from rhizobium sp. Rc1 and its association with 3-chloropropionic acid (?-Chlorinated aliphatic acid). Biotechnology and Biotechnological Equipment, 27 (2). pp. 3725-3736. ISSN 1310-2818

Mohd. Shukri, Nurasmat and Wan Abu Bakar, Wan Azelee and Jaafar, Jafariah and Abdul Majid, Zaiton (2015) Removal of naphthenic acids from high acidity Korean crude oil utilizing catalytic deacidification method. Journal of Industrial and Engineering Chemistry, 28 . pp. 110-116. ISSN 1226-086X

Mohd. Sokri, Mohd. Nazri and Onishi, Takahiro and Daiko, Yusuke and Honda, Sawao and Iwamoto, Yuji (2015) Hydrophobicity of amorphous silica-based inorganic-organic hybrid materials derived from perhydropolysilazane chemically modified with alcohols. Microporous and Mesoporous Materials, 215 . pp. 183-190. ISSN 1387-1811

Mohd. Warid Hussin, (2013) Palm oil fuel ash: promising supplementary cementing materials. KSCE Journal of Civil Engineering, 17 (7). pp. 1708-1713. ISSN 1226-7988

Mohd. Yazid Yahya, (2013) Effect on mechanical performance of uhmwpe/hdpe-blend reinforced with kenaf, basalt and hybrid kenaf/basalt fiber. Polymer-Plastics Technology and Engineering, 52 (11). pp. 1140-1146. ISSN 0360-2559

Mohd. Yazid Yahya, (2013) Mechanical characterization of basalt/hdpe composite under in-vitro condition. Polymer-Plastics Technology and Engineering, 52 (10). pp. 1007-1015. ISSN 0360-2559

Mohd. Yunus, Nor Zurairahetty (2013) Lime stabilisation of organic clay and the effects of humic acid content. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 44 (1). pp. 19-25. ISSN 0046-5828

Mohd. Yusof, Abdul Halim and Ulbricht, Mathias (2007) Polypropylene-based membrane adsorbers via photo-initiated graft copolymerization: optimizing separation performance by preparation conditions. Journal of Membrane Science, 311 (1-2). pp. 294-305. ISSN 0376-7388

Mohd. Yusof, Khairiyah and Idris, Ani (2008) Utilization of stacked neural network for pore size prediction of asymmetric membrane. Jurnal Teknologi (49F). pp. 251-260. ISSN 0127-9696

Mohd. Yusof, Khairiyah and Karray, Fakhri and Douglas, Peter L. (2003) Development of neural network models for a crude oil distillation column. Jurnal Teknologi F (38F). pp. 53-64. ISSN 0127-9696

Mohd. Yusof, A. H. and Ulbricht, Mathias (2008) Variation of weak cation-exchange polymer layers grafted on hydrophobic microfiltration membrane for protein separation. Journal of Chemical & Natural Resources Engineering, 2 . pp. 53-59. ISSN 1823-5255

Mohd. Yusof, Mohd. Rashid (1986) The application of x-ray fluorescence spectrometry for multielemental analysis of air particulate samples. Buletin Kimia, 1 (2). pp. 76-90.

Mohd. Yusoff, Mohd. Rashid (1987) Comparison of TSP measurements by two hi-vol samplers located side by side. Journal of Environmental Science & Technology for Balanced Development . (Submitted)

Mohd. Yusoff, Mohd. Rashid (1987) Determination of total suspended particulate with and without the use of control filters. Journal of Environmental Science & Technology for Balanced Development . pp. 1-4. (Submitted)

Mohd. Yusoff, Mohd. Rashid and I., Salmah and R. S., Ahmad (1990) Kesan suhu terhadap kandungan lembapan dan asid lemak bebas isirong kelapa sawit. Pertanika . pp. 1-12.

Mohd. Yusoff, Mohd. Rashid and Wood, Abdul Khalik and Shafii, Azman Firdaus (1987) Elemental composition of palm-oil mill boiler flyash. Journal of Environmental Science & Technology for Balanced Development . pp. 1-11. (Submitted)

Mohd. Yusoff, Mohd. Rashid and Ahamad, Rahmalan and Wood, Abdul Khalik (1997) Characterization of atmospheric fine and coarse aerosols on Kuala Lumpur. Pertanika Journal of Science & Technology, 5 (1). pp. 25-42. ISSN 0128-7680

Mohd. Yusoff, Mohd. Rashid (1987) Air pollution control legislation - Research needs. Conference on Environmental Legislation . pp. 1-7.

Mohd. Yusoff, Mohd. Rashid (1987) An investigation of PM10 concentrations at one site of Kuala Lumpur. Symposium of Malaysian Chemical Engineers . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid (1987) Komposisi aerosol halus dan kasar di chicago dengan pendafluor sinar-X. Simposium Kimia Analisis . pp. 1-12.

Mohd. Yusoff, Mohd. Rashid (1990) Rekabentuk asas di dalam program pengawalan kualiti udara. Alam Sekitar, 11 (1). pp. 9-11.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1987) Background air particulate chemistry in Kuala Lumpur. Malaysia Chemical Congress .

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1986) Elemental composition of total suspended particulate matter in Kuala Lumpur - A preliminary survey. Simposium Kedua Jurutera Kimia Malaysia . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1988) Nilai C1/Br dan Halida/pb di dalam minyak petrol tempatan. Jurnal Teknologi . pp. 1-8.

Mohd. Yusoff, Mohd. Rashid and Allen Scheff, Peter (1987) Identification of sources of aerosol in Chicago by chemical element mass balance. XVI Pacific Science Congress . pp. 1-15.

Mohd. Yusoff, Mohd. Rashid and Harun, Mohd. (1989) Morfologi abu terbang dari emisi dandang kilang kelapa sawit. Morfologi Abu Terbang . (Unpublished)

Mohd. Yusoff, Mohd. Rashid and Scheff, Peter Allan (1987) Determination of sources of aerosol in Chicago by chemical element mass balance. Chemical Element . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid and Shafil, Azman Firdaus and Wood, Abdul Khalik (1987) Unsur logam berat : emisi dari kilang kelapa sawit. Buletin Kimia .

Mohd. Yusoff, Mohd. Rashid and Wood, Abdul Khalik and Shaffi, Azman Firdaus (1987) Multielemental analysis of an industrial source emission by nuetron activation analysis : A case study of a palm-oil mill plant. A Case Study Of A Palm-Oil Mill Plant . pp. 1-10.

Mohd. Zaki Kamsah, (2014) Engaging integrated approach in designing engineering curricula. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 190-195.

Mohd–Norddin, M. N. A. and Ismail, A. F. (2007) Preparation and characterization of blending sulfonated poly(ether ether ketone) with charged surface modifying macromolecules. Journal of Applied Membrane Science & Technology, 5 . pp. 1-10. ISSN 1823–366X

Mohsin, R. and Abd. Majid, Z. (2008) Water condensation in low pressure steam turbine : a nucleation theory - Part 1. Journal of Chemical & Natural Resources Engineering, 2 . pp. 40-49. ISSN 1823-5255

Mohsin, R. and Abd. Majid, Z. (2008) Water condensation in low pressure steam turbine : a nucleation theory - Part II. Journal of Chemical & Natural Resources Engineering, 2 . pp. 50-63. ISSN 1823-5255

Mohsin, R. and Nasri, N. S. and Kefly, F. (2008) Structural analysis of NGVM pressure regulator via FEA. Journal of Chemical and Natural Resources Engineering, 2 . pp. 46-58. ISSN 1823-5255

Mohsin, R. and Yaacob, Z. and Y., Chang (2008) Review of mixture formation unit for CNG motorcycle. Journal of Chemical and Natural Resources Engineering, 2 . pp. 1-7. ISSN 1823-5255

Mohsin, Rahmat and Yaacob, Zulkifli and Abdul Majid, Zulkefli and Ashra, Shameed (2009) Bi-fuel NGVM engine emission results based on non-loaded system operation. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 22-33. ISSN 1823-5255

Mohsin, R. and Abd. Majid, Z. and Nasri, N. S. and Kiat, L. K. (2008) Pressure drop performance in gas custody transfer through domestic gas meter operations. Journal of Chemical & Natural Resources Engineering, 2 . pp. 20-27. ISSN 1823-5255

Mohsin, R. and Abd. Majid, Z. and Nasri, N. S. and Kiat, L. K. (2008) Overall performance of domestic gas meter operations. Journal of Chemical & Natural Resources Engineering, 2 . pp. 77-90. ISSN 1823-5255

Mohtar, Mohd Ajib and Kumaresan, Sivakumar and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2007) Modelling and optimisation of Eurycoma longifolia extraction utilising a recirculating flow extractor. Journal of Applied Sciences, 7 (15). pp. 2168-2173. ISSN 1812-5654

Mohtar, Samia S. and Tengku Malim Busu, T. N. Z. and Md. Noor, A. M. and Shaari, Nursyamimi Latif A. and Yusoff, Norazila A. and Bustam Khalil, M. A. and Abdul Mutalib, Mohamed Ibrahim and Mat, Hanapi (2015) Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes. Bioresource Technology, 192 . pp. 212-218. ISSN 0960-8524

Moslehyani, Ali and Ismail, Ahmad Fauzi and Othman, Mohd. Hafiz Dzarfan and Matsuura, Takeshi (2015) Hydrocarbon degradation and separation of bilge water via a novel TiO2-HNTs/PVDF-based photocatalytic membrane reactor PMR). RSC Advances, 5 (19). pp. 14147-14155. ISSN 2046-2069

Motasemi, (2012) Microwave irradiation biodiesel processing of waste cooking oil. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 842-853. ISSN 0094-243X

Mubarak, N. M. and Fo, Y. T. and Al-Salim, Hikmat Said S. and Sahu, Jaya Narayan and Abdullah, Ezzatchan and Nizamuddin, Sabzoi and Jayakumar, Natesan Subramanian and Ganesan, Poobalan (2015) Removal of methylene blue and orange-g from waste water using magnetic biochar. International Journal of Nanoscience, 14 (4). ISSN 0219-581X

Muhamad, Ida Idayu and Chaoying, Fang and Campbell, Grant M. (2008) Prediction of breakage during roller milling of mixtures of wheat kernels, based on single kernel measurements. Jurnal Teknologi (48F). pp. 75-83. ISSN 0127-9696

Muhamad, Ida Idayu and Fang, Chaoying and Campell, Grant M. (2006) Comparison of grain particle size distribution in the single kernel characterisation system and during first break roller milling. Jurnal Teknologi F (44F). pp. 41-52. ISSN 0127-9696

Muhamad, Ida Idayu and Hassan, M. F. and Mohamad, S. N. H. and L., C. Tin and Sarmidi, M. R. (2008) Production of pleurotus sajor-caju on sawdust of rubber tree and empty palm fruit bunch. Journal of Chemical and Natural Resources Engineering - Advances in Product Development, 2 . pp. 14-23. ISSN 1823-5255

Muhamad, Ida Idayu and Lee, Kar Joon and Mohd. Noor, Mohd. Azemi (2006) Comparing the degradation of Poly-B-(hydroxybutyrate), poly-B-(hydroxbutyrate-co-valerate)(PHBV) and PHBV/cellulose tricate blend. Malaysian Polymer Journal, 1 (1). pp. 39-46. ISSN 1823-7789

Muhamad, Ida Idayu and Mohd. Nor, Nurzyyati (2008) Probiotik, prebiotik dan pelindung patogen. Dewan Kosmik, 16 (3). pp. 27-28. ISSN 0128-6579

Muhamad, I. I. and Ahmad, N. U. and Mohd. Nawi, N. and Tin, L. C. and Sarmidi, M. R. (2008) Antimicrobial substances in Lawsonia Inermis and Stevia Rebaudiana for controlling spoilage micro organisms. Journal of Chemical & Natural Resources Engineering, 2 . pp. 99-107. ISSN 1823-5255

Muhamad, Mimi Suliza and Salim, Mohd. Razman and Lau, W. J. (2015) Preparation and characterization of PES/SiO2 composite ultrafiltration membrane for advanced water treatment. Korean Journal of Chemical Engineering, 32 (11). pp. 2319-2329. ISSN 0256-1115

Muhamad Ali Muhammad Yuzir, (2013) Effect of mecoprop (rs)-mcpp on the biological treatment of synthetic wastewater in an anaerobic membrane bioreactor. Bioresource Technology, 133 . pp. 158-165. ISSN 0960-8524

Muhamad Ali Muhammad Yuzir, (2013) Influence of palm oil mill effluent as inoculum on anaerobic digestion of cattle manure for biogas production. Bioresource Technology, 141 . pp. 174-176. ISSN 0960-8524

Muhamad Ali Muhd. Yuzir, (2014) Biological pre-treated oil palm mesocarp fibre with cattle manure for biogas production by anaerobic digestion during acclimatization phase. International Biodeterioration and Biodegradation, 95 (Part A). pp. 189-194. ISSN 0964-8305

Muhamad Rasyidi Husin, (2011) Effect of hydroxypatite reinforced high density polyethylene composites on mechanical and bioactivity properties. Key Engineering Materials, 471-47 . pp. 303-308. ISSN 1013-9826

Muhamad Zameri Mat Saman, (2013) Sustainability evaluation using fuzzy inference methods. International Journal of Sustainable Energy, 32 (3). pp. 169-185. ISSN 1478-6451

Muhammad, Ida Idayu and Ibrahim, Ummi Kalthum and Mohd. Salleh, Ruzitah (2011) The effect of pH on color behavior of brassica oleracea anthocyanin. Journal of Applied Sciences, 11 (13). pp. 2406-2410. ISSN 1812-5654

Muhammad Abbas Ahmad Zaini, (2013) Critical issues in microwave-assisted activated carbon preparation. Journal of Analytical and Applied Pyrolysis, 101 . pp. 238-241. ISSN 0165-2370

Muhammad Abbas Ahmad Zaini, (2014) Enhanced lead(II) binding properties of heat-treated cattle-manure-compost-activated carbons. Desalination and Water Treatment, 52 (34-36). pp. 6420-6429. ISSN 1944-3994

Muhammad Abbas Ahmad Zaini, (2014) Irradiated water-activated waste tyre powder for decolourization of reactive orange 16. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 95-100. ISSN 2180-3722

Muhammad Abbas Ahmad Zaini, (2014) Palm oil mill effluent sludge ash as adsorbent for methylene blue dye removal. Desalination and Water Treatment, 52 (19-21). pp. 3654-3662. ISSN 1944-3986

Muhammad Munir, Sadiq and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2012) Holistic carbon planning for industrial parks: a waste-to-resources process integration approach. Journal of Cleaner Production, 33 . pp. 74-85. ISSN 0959-6526

Muhd. Nazrul Hisham, Zainal Alam and Schäpper, Daniel and Szita, Nicolas and Lantz, Anna Eliasson and Gernaey, Krist V. (2009) Application of microbioreactors in fermentation process development : a review. Analytical and Bioanalytical Chemistry , 395 (3). pp. 679-695. ISSN 16182642

Muherei, Mazen Ahmed and Junin, Radzuan (2008) Mixing effect of anionic and nonionic surfactants on micellization, adsorption and partitioning of nonionic surfactant. Modern Applied Science, 2 (3). pp. 3-12. ISSN 1913-1844 (Print); 1913-1852 (Electronic)

Musa, (2012) Computational analysis of flow field around Ahmed Car Model passing underneath a flyover. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 190-198. ISSN 0094-243X

Muslim Amin, (2013) Service quality dimension and customer satisfaction: an empirical study in the Malaysian hotel industry. Services Marketing Quarterly, 34 (2). pp. 115-125. ISSN 1533-2969

Mustafa, A. and Andrews, G. E. Influence Of Fuel Injection Techniques On Combustion Performance Of Multi-Jet Shear Layer Combustion. Proceeding of International Conference On Chemical and Bioprocess Engineering, Universiti Malaysia Sabah, Sabah .

Mustafa, A. and Hossain, K. A. and Jaafar, M. N. M. and Ani, F. N. (2003) Small scale application of urea based selective non-catalytic reduction of nitric oxide in diesel burning effluent. Proceeding of Regional Symposium on Chemical Engineeering . pp. 1-6.

Mustafa, A. and Mohsin, R. and Nasri, N.S. (2000) The Effect of Hydrogen Reduction Temperature On The Palladium-Supported Catalyst In The Combustion Of Methane. Jurnal Teknologi (32F). pp. 77-92. ISSN 0127-9696

Mustafa, Azeman and Andrew, G. E. (2005) Isothermal Modeling Study Of Concentration Fluctuations In Multi-Jet Turbulent Mixing. Jurnal Teknologi (42F). pp. 75-88. ISSN 0127-9696

Mustafa, A. and Nasri, N. S. Computational studies of fuel and air mixing characteristics of a low pressure domestic gas appliance. Proceeding of ICCBE 2003 .

Mustafa Kamal Abd. Aziz, (2014) Biomass characteristics index: a numerical approach in palm bio-energy estimation. Computer Aided Chemical Engineering, 33 . pp. 1093-1098. ISSN 1570-7946

Mustaffa, Azizul Azri and Kamarudin, Khairul Sozana Nor and Mat, Hanapi (2008) Adsorption characteristics of bovine serum albumin and rifampicin on immobilized metal ion affinity mesoporous adsorbents. Jurnal Teknologi F (49F). pp. 51-68. ISSN 0127-9696

Mustapa, A. N. and Abdul Manan, Zainuddin and Mohd. Azizi, C. Y. (2008) Subcritical and supercritical fluid extraction a critical review of its analytical usefulness. Journal of Chemical and Natural Resources Engineering, 2 . pp. 164-180. ISSN 1823-5255

N. Yusof, (2012) Post spinning and pyrolysis processes of polyacrylonitrile (PAN)-based carbon fiber and activated carbon fiber: a review. Journal Of Analytical And Applied Pyrolysis, 93 . pp. 1-13. ISSN 0165-2370

Nabok, Alexei and Haron, Saharudin and Asim Ray, Asim Ray (2004) Registration of heavy metal ions and pesticides with ATR planar waveguide enzyme sensors. Applied Surface Science, 238 (Issue ). pp. 423-428.

Naim, R. and Ismail, Ahmad Fauzi and Mansourizadeh, A. (2012) Effect of non-solvent additives on the structure and performance of PVDF hollow fiber membrane contactor for CO2 stripping. Journal of Membrane Science, 423-24 . pp. 503-513. ISSN 0376-7388

Naim R., (2012) Preparation of microporous PVDF hollow fiber membrane contactors for CO2 stripping from diethanolamine solution. Journal of Membrane Science, 392-39 . pp. 29-37. ISSN 0376-7388

Nam Sun, Kheen and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2013) Heat exchanger network cost optimization considering multiple utilities and different types of heat exchangers. Computers & Chemical Engineering, 49 . pp. 194-204. ISSN 0098-1354

Naomie Salim, (2013) Consensus methods for combining multiple clusterings of chemical structures. Journal of Chemical Information and Modeling, 53 (5). pp. 1026-1034. ISSN 1549-9596

Nasef, M. M. and Zubir, N. A. and Ismail, A. F. and Khayet, M. and Dahlan, K. Z. M. and Saidi, H. and Rohani, R. and Ngah, T. S. I. and Sulaiman, N. A. (2006) PSSA pore-filled PVDF membranes by simultaneous electron beam irradiation: preparation and transport characteristics of protons and methanol. Journal of Membrane Science, 268 (1). pp. 96-108. ISSN 0376-7388

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Dahlan, Kamarul Zaman (2007) Preparation of composite polymer electrolytes by electron beam-induced grafting: Proton- and lithium ion-conducting membranes. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 265 (1). pp. 168-172. ISSN 0168-583X

Nasef, Mohamed Mahmoud and Suppiah, Raja Rajeswary and Mohd Dahlan, Khairul Zaman (2004) Preparation of polymer electrolyte membranes for lithium batteries by radiation-induced graft copolymerization. Solid State Ionics, 171 (3-4). pp. 243-249. ISSN 0167-2738

Nasef, Mohamed Mahmoud and Güven, Olgun (2012) Radiation-grafted copolymers for separation and purification purposes: status, challenges and future directions. Progress in Polymer Science, 37 (12). pp. 1597-1656. ISSN 0079-6700

Nasef, Mohamed Mahmoud and Saidi, Hamdani (2006) Single radiation-induced grafting method for the preparation of two proton- and lithium ion- conducting membranes. Macromolecular Materials and Engineering, 291 (8). pp. 972-983. ISSN 1438-7492

Nasef, Mohamed Mahmoud and Sugiarmawan, Indriani Andromeda (2010) Radiation induced emulsion grafting of glycidyl methacrylate onto high density polyethylene: a kinetic study. Journal of Fundamental Sciences, 6 (2). pp. 93-97. ISSN 1823-626X

Nasef, M. M. and Saidi, H. and Dahlan, K. Z. M. (2007) Preparation of composite polymer electrolytes by electron beam-induced grafting : proton and lithium ion-conducting membranes. Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions with Materials and Atoms, 265 (Issue 1). pp. 168-172.

Nasef, M. M. and Zubir, N. A. and Ismail, A. F. and Dahlan, K. Z. M. and Saidi, H. and Khayet, M. (2006) Preparation of radiochemically pore-filled polymer electrolyte membranes for direct methanol fuel cells. Journal of Power Sources, 156 (2). pp. 200-210. ISSN 0378-7753

Nasef, Mohamed Mahmoud (2000) Gamma radiation-induced graft copolymerization of styrene onto poly(ethyleneTerephthalate) films. Journal of Applied Polymer Science, 77 . pp. 1003-1012.

Nasef, Mohamed Mahmoud (2002) Structural investigations of poly(ethylene terephthalate)- graft-polystyrene copolymer films. Journal of Applied Polymer Science, 84 . pp. 1949-1955.

Nasef, Mohamed Mahmoud and Saidi, Hamdani (2002) Post-mortem analysis of radiation grafted fuel cell membrane using X-ray photoelecton spectroscopy. Journal of New Materials for Electrochemical Systems, 5 .

Nasef, Mohamed Mahmoud and Saidi, Hamdani (2004) Structure of polyethylene-graft-polystyrene sulfonic acid membranes prepared by radiation-induced grafting. International Journal of Polymeric Materials, 53 . pp. 1027-1043.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Dessouki, Ahmed Mokhtar and EI-Nesr, Eman Mohamed (2000) Radiation-induced grafting of styrene onto poly(tetrafluoroethylene) (PTFE) films. I. Effect of grafting conditions and properties of the grafted films. Polymer International, 49 . pp. 399-406.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin (1999) Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. III. Thermal stability of the membranes. Journal of Applied Polymer Science, 77 . pp. 1877-1885.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin (2000) Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethyleneco- hexafluoropropylene) films. I. Effect of grafting conditions. Journal of Applied Polymer Science, 76 . pp. 220-227.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin and Ooi, Mun Foo (2000) Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. II. Charactarization of sulfonated graft copolymer membranes. Journal of Applied Polymer Science, 76 . pp. 1-11.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin and Ooi, Mun Foo (2000) Proton exchange membranes prepared by simultaneous radiation grafting of styrene onto poly(tetrafluoroethylene-co-hexafluoropropylene) films. II. Properties of sulfonated membranes. Journal of Applied Polymer Science, 78 . pp. 2443-2453.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin and Ooi, Mun Foo (2000) Radiation-induced grafting of styrene onto poly(tetrafluoroethylene) films. Part II. Properties of the grafted and sulfonated membranes. Polymer International, 49 . pp. 1572-1579.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Nor, Hussin and Yarmo, Mohd Ambar (2000) XPS studies of radiation grafted PTFE-g-polystyrene sulfonic acid membranes. Journal of Applied Polymer Science, 76 . pp. 336-349.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Yormo, Mohd Ambar (2000) Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. IV. Morphological investigations using x-ray photoelectron spectroscopy. Journal of Applied Polymer Science, 77 . pp. 2455-2463.

Nasef, Mohamed and Zubir, Nor Aida and Ismail, Ahamed Fauzi and Khayet, Mohamed (2006) Sulfonated radiation grafted polystyrene pore-filled poly(vinylidene fluoride) membranes for direct methanol fuel cells : structure–property correlation. Desalination, 200 (1-3). pp. 642-644. ISSN 0011-9164

Nasri, Noor Shawal and Tade, O. G. (2008) Comparison of catalyst activity between palladium, copper and iron catalyst in catalytic combustion of methane. Journal of Chemical and Natural Resources Engineering, 2 . pp. 113-121. ISSN 1823-5255

Nasution, (2012) Experimental evaluation of automotive air-conditioning using HFC-134a and HC-134a. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 997-1002. ISSN 0094-243X

Ng, Hon-Meng and Sin, Lee Tin and Tee, Tiam-Ting and Bee, Soo-Tueen and Hui, David and Low, Chong-Yu and Rahmat, Abdul Razak (2015) Extraction of cellulose nanocrystals from plant sources for application as reinforcing agent in polymers. Composites Part B: Engineering, 75 . pp. 176-200. ISSN 1359-8368

Ng, Wendy Pei Qin and Lam, Hon Loong and Ng, Foo Yuen and Kamal, Mustafa and Lim, Joseph Heng Ee (2012) Waste-to-wealth: green potential from palm biomass in Malaysia. Journal of Cleaner Production, 34 . pp. 57-65. ISSN 0959-6526

Ng W.P.Q., (2012) Biomass corridor synthesis for Malaysia green energy supply chain. Chemical Engineering Transactions, 29 . pp. 703-708. ISSN 1974-9791

Ngadi, Norzita and Saidina Amin, Nor Aishah and Khew, Shih Tak and Lai, Siok Lian and Lau, Kok Keong (2006) Catalytic ozonation of 2-hydroxy-1,2,3-propanetricarboxylic acid. Jurnal Teknologi (44C). pp. 13-22. ISSN 0127-9696

Ngadi, Norzita and Arsad, Nurul Jannah and Roslan, Noor Azuin (2013) Treatment of textile wastewater using chitosan and chitosan grafted acrylamide by microwave synthesis. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 97-104. ISSN E-ISSN 2180-3722

Ngadiman, Nor Hasrul Akhmal and Idris, Ani and Irfan, Muhammad and Kurniawan, Denni and Mohd. Yusof, Noordin and Nasiri, Rozita (2015) y-Fe2O3 nanoparticles filled polyvinyl alcohol as potential biomaterial for tissue engineering scaffold. Journal of the Mechanical Behavior of Biomedical Materials, 49 . pp. 90-104. ISSN 1751-6161

Nik Mahmood, Nik Azmi and Thong, Lokekwong and Chyan, Jongboor and Ghazali, Nazlee Faisal (2015) Power generation from pre-treated empty fruit bunch using single chamber microbial fuel cell. Chemical Engineering Transactions, 45 . pp. 79-84. ISSN 2283-9216

Nik Norulaini, N. A. and Setianto, W. B. and Zaidul, I. S. M. and Nawi, A. H. and Azizi, C. Y. M. and Mohd. Omar, A. K. (2009) Effects of supercritical carbon dioxide extraction parameters on virgin coconut oil yield and medium-chain triglyceride content. Food Chemistry, 116 (1). pp. 193-197. ISSN 03088146

Nik Salleh, Nik Ghazali and Yhaya, Mohd. Firdaus and Hassan, Azman and Abu Bakar, Aznizam and Mokhtar, Munirah (2009) Development of scratch- and abrasion-resistant coating materials based on nanoparticles, cured by radiation. International Journal of Polymeric Materials, 58 (8). pp. 422-451. ISSN 0091-4037

Nikoo M.K., (2011) Carbon dioxide reforming of methane by catalytic-plasma reactor over cu/zn/î³-al2o3. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 75-86. ISSN 0127-9696

Nkem, Augusta N. and Hassim, Mimi Haryani and Kidam, Kamarizan (2015) Relationship between unsafe acts/condition and accidents in construction company in Nigeria. Jurnal Teknologi, 75 (6). pp. 73-77. ISSN 0127-9696

Noor, Y. M. and Samsulrizal, N. H. and Jema'on, N. A. and Low, K. O. and Ramli, A. N. M. and Alias, N. I. and Darnis, S. I. R. and Fuzi, S. F. Z. M. and Isa, M. N. M. and Murad, A. M. A. and Raih, M. F. M. and Abu Bakar, F. D. and Najimudin, N. and Mahadi, N. M. and Illias, R.M (2014) A comparative genomic analysis of the alkalitolerant soil bacterium Bacillus lehensis G1. Gene, 545 (2). pp. 253-261. ISSN 1879-0038

Noor Izawati Alias, (2011) Expression optimisation of recombinant?-l-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris and its biochemical characterisation. African Journal of Biotechnology, 10 (35). pp. 6700-6710. ISSN 1684-5315

Nor Aishah Saidina Amin, (2013) Catalytic conversion of lignocellulosic biomass to levulinic acid in ionic liquid. Bioresources, 8 (4). pp. 5761-5772. ISSN 1930-2126

Nor Aishah Saidina Amin, (2014) Catalytic conversion of oil palm fronds to levulinic acid in ionic liquid. Applied Mechanics and Materials, 625 . pp. 361-365. ISSN 1660-9336

Nor Aishah Saidina Amin, (2014) Catalytic hydrolysis of cellulose and oil palm biomass in ionic liquid to reducing sugar for levulinic acid production. Fuel Processing Technology, 128 . pp. 490-498. ISSN 0378-3820

Nor Aishah Saidina Amin, (2014) Comparison of response surface methodology and artificial neural network for optimum levulinic acid production from glucose, empty fruit bunch and kenaf. International Journal of Nano and Biomaterials, 5 (1). pp. 59-74. ISSN 1752-8941

Nor Aishah Saidina Amin, (2014) Esterification of oleic acid to biodiesel using magnetic ionic liquid: Multi-objective optimization and kinetic study. Applied Energy, 114 . pp. 809-818. ISSN 0306-2619

Nor Aishah Saidina Amin, (2014) Glycerol for renewable acrolein production by catalytic dehydration. Renewable and Sustainable Energy Reviews, 40 . pp. 28-59. ISSN 1364-0321

Nor Aishah Saidina Amin, (2014) Hydrogenation of CO2 to value-added products - a review and potential future developments. Journal of CO2 Utilization, 5 . pp. 66-81. ISSN 2212-9820

Nor Aishah Saidina Amin, (2014) Immobilized lipase-catalyzed transesterification of Jatropha curcas oil: optimization and modeling. Journal of the Taiwan Institute of Chemical Engineers, 45 (2). pp. 444-451. ISSN 1876-1070

Nor Aishah Saidina Amin, (2013) Microwave assisted biodiesel production from jatropha curcas l. Seed by two-step in situ process: optimization using response surface methodology. Bioresource Technology, 136 . pp. 565-573. ISSN 0960-8524

Nor Aishah Saidina Amin, (2013) Optimization of hydrodesulfurization activity in the hydrotreating process: canonical analysis and the combined application of factorial design and response surface methodology. Reaction Kinetics Mechanisms and Catalysis, 108 (2). pp. 371-390. ISSN 1878-5190

Nor Aishah Saidina Amin, (2014) Optimization of oil palm fronds pretreatment using ionic liquid for levulinic acid production. Jurnal Teknologi, 71 (1). pp. 33-41. ISSN 0127-9696

Nor Aishah Saidina Amin, (2014) Oxidative coupling of methane in a corona discharge plasma reactor using HY zeolite as a catalyst. REACTION KINETICS MECHANISMS AND CATALYSIS, 113 (2). pp. 557-573. ISSN 1878-5190

Nor Aishah Saidina Amin, (2014) Performance analysis of monolith photoreactor for CO2 reduction with H2. Energy Conversion and Management, 90 . pp. 272-281. ISSN 0196-8904

Nor Aishah Saidina Amin, (2013) Photocatalytic co2 reduction and kinetic study over in/tio2 nanoparticles supported microchannel monolith photoreactor. Applied Catalysis A: General, 467 . pp. 483-496. ISSN 0926-860X

Nor Aishah Saidina Amin, (2013) Photocatalytic co2 reduction with h2o vapors using montmorillonite/tio2 supported microchannel monolith photoreactor. Chemical Engineering Journal, 230 . pp. 314-327. ISSN 1385-8947

Nor Aishah Saidina Amin, (2013) Photocatalytic reduction of carbon dioxide with water vapors over montmorillonite modified tio2 nanocomposites. Applied Catalysis B: Environmental, 142-14 . pp. 512-522. ISSN 0926-3373

Nor Alafiza Yunus, (2014) A systematic methodology for design of tailor-made blended products. Computers and Chemical Engineering, 66 . pp. 201-213. ISSN 0098-1354

Nor Asiah Muhamad, (2014) Effect of moisture on breakdown voltage and structure of palm based insulation oils. IEEE Transactions on Dielectrics and Electrical Insulation, 21 (5). p. 2126. ISSN 1070-9878

Nor Azwadi Che Sidik, (2013) Analysis of mixed convection of alumina-water nanofluid flow over heated cavity using lattice boltzmann method. International Review On Modelling and Simulations, 6 (4). pp. 1350-1354. ISSN 1974-9821

Nor Haniza Sarmin, (2014) Automorphism group of nonabelian groups of order p(3). AIP Conference Proceedings, 1602 . pp. 640-643. ISSN 0094-243X

Nor Haniza Sarmin, (2014) Homological functor of a torsion free crystallographic group of dimension five with a nonabelian point group. AIP Conference Proceedings, 1602 . pp. 691-695. ISSN 0094-243X

Nor Haniza Sarmin, (2014) On the abelianization of a torsion free crystallographic group. Jurnal Teknologi (Sciences and Engineering), 70 (1). pp. 81-84. ISSN 0127-9696

Nor Haniza Sarmin, (2014) On the exterior degree of the wreath product of finite abelian groups. Bulletin of the Malaysian Mathematical Sciences Society, 37 (1). pp. 25-36. ISSN 0126-6705

Nor Kamarudin, Khairul Sozana (2008) FTIR spectroscopy of methane adsorption on zeolites. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 . pp. 31-39. ISSN 1823-5255

Nor Kamarudin, Khairul Sozana and I., Bhatti and S. N, Suahadah and U. N., Hamzah and Z. F., Mohd. Faiz (2010) Removal of carbon dioxide using water-in-oil emulsion liquid membrane containing triethanolamine. Journal of Applied Science Research, 6 (12). pp. 2251-2256. ISSN 1816-157X

Nor Kamarudin, Khairul Sozana and Mohamad, M. F. and Nik Mohamed Fathilah, N. N. F. and Mohamed, M. S. (2010) Effects of PVP concentration on the fonnation of size and shape of gold (au) nanoparticles for mercury adsorption. Journal of Applied Sciences , 10 (24). pp. 3374-3378. ISSN 1812-5654 (Print); 1812-5662 (Electronic)

Nor Kamarudin, Khairul Sozana and Shin, L. K. and Mat, H. (2008) Adsorption of C02 and CH4 on metal-cation exchange zeolite. Journal of Chemical and Natural Resources Engineering, 2 . pp. 82-90. ISSN 1823-5255

Nor Kamarudin , Khairul Sozana and Mohamad, Mawarni Fazliana (2010) Synthesis of gold (au) Nanoparticles for mercury adsorption. American Journal of Applied Sciences, 7 (6). pp. 835-839. ISSN 1546-9239 (Print); 1554-3641 (Electronic)

Norasikin Othman, (2014) Carrier assisted emulsion liquid membrane process for recovery of basic dye from wastewater using continuous extractor. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 69-74. ISSN 0127-9696

Norasikin Othman, (2014) Emulsion liquid membrane stability in the extraction of ionized nanosilver from wash water. Journal of Industrial and Engineering Chemistry, 20 (5). pp. 3243-3250. ISSN 1226-086X

Norasikin Othman, (2014) Extraction of lignosulfonate using TOA-kerosene-PVDF in supported liquid membrane process. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 59-63. ISSN 0127-9696

Norasikin Othman, (2013) Extraction of rhodamine 6g dye from liquid waste solution: study on emulsion liquid membrane stability performance and recovery. Separation Science and Technology, 48 (8). pp. 1177-1183. ISSN 0149-6395

Norasikin Othman, (2014) Liquid membrane component selection for succinic acid extraction. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 73-76. ISSN 0127-9696

Norasikin Othman, (2014) Liquid-liquid extraction of palladium from simulated liquid waste using phosphinic acid as a carrier. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 41-45. ISSN 2180-3722

Norasikin Othman, (2014) Parameter study of ionized nanosilver recovery from wash water using emulsion liquid membrane process. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 71-74. ISSN 2180-3722

Norasikin Othman, (2014) Prediction of kraft lignin extraction performance using emulsion liquid membrane carrier-diffusion model. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 17-21. ISSN 0127-9696

Norazana Ibrahim, (2013) Experimental investigation of flash pyrolysis oil droplet combustion. Chemical Engineering Transactions, 32 . pp. 667-672. ISSN 1974-9791

Norbik Bashah Idris, (2013) A unified trust model for pervasive environments - simulation and analysis. KSII Transactions On Internet and Information Systems, 7 (7). pp. 1569-1584. ISSN 1976-7277

Norhayani Othman, (2014) Entry flows of polylactides with slip. Journal of Non-Newtonian Fluid Mechanics, 210 . pp. 78-84. ISSN 0377-0257

Norhayati Abdullah, (2013) Characterization of aerobic granular sludge treating high strength agro-based wastewater at different volumetric loadings. Bioresource Technology, 127 . pp. 181-187. ISSN 0960-8524

Norhisham Bakhary, (2011) Detection of concrete spalling using changes in modal flexibility. Advanced Materials Research, 163-16 . pp. 2598-2602. ISSN 1022-6680

Norhuda, I. and Mohd. Omar, A. K. and Mohd. Azizi, C. Y. (2008) Determination of overall mass transfer coefficient of palm kernel extracted using supercritical carbon dioxide. Journal of Chemical and Natural Resources Engineering, 2 . pp. 64-72. ISSN 1823-5255

Normah, (2012) Thermal analysis of Malaysian double storey housing - low/medium cost unit. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 513-520. ISSN 0094-243X

NorUTMAIShah Saidi Amin, (2011) Catalytic ozotion of aqueous phenol over metal-loaded HZSM-5. Water Science and Technology, 63 (8). pp. 1651-1656. ISSN 0273-1223

Norzita Ngadi, (2014) Chitosan-grafted nanocellulose derived from empty fruit bunch for ethyl orange removal. Applied Mechanics and Materials, 625 . pp. 784-787. ISSN 1660-9336

Norzita Ngadi, (2014) Extraction and characterization of cellulose from empty fruit bunch (EFB) fiber. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 35-39. ISSN 2180-3722

Norzita Ngadi, (2014) Extraction and characterization of cellulose from pandan leaves (Pandanusamaryllifolius Roxb.). Research Journal of Chemistry and Environment, 18 (1). pp. 82-88. ISSN 0972-0626

Norzita Ngadi, (2014) Extraction of 2-acetyl-1-pyrroline (2AP) in Pandan leaves (Pandanus amaryllifolius Roxb.) via solvent extraction method: effect of solvent. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 51-54. ISSN 0127-9696

Norzita Ngadi, (2014) Isolation and characterization of vanillin from coconut husk lignin via alkaline nitrobenzene oxidation. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 19-23. ISSN 2180-3722

Norzita Ngadi, (2014) Isolation, characterization, and application of nanocellulose from oil palm empty fruit bunch fiber as nanocomposites. Journal of Nanomaterials . ISSN 1687-4110

Norzita Ngadi, (2013) Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid. Bioresource Technology, 135 . pp. 690-696. ISSN 0960-8524

Norzita Ngadi, (2014) Preparation and characterisation of activated carbon from palm kernel shell by physical activation with steam. JOURNAL OF OIL PALM RESEARCH, 26 (3). p. 264. ISSN 1511-2780

Noshadi, (2012) Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: optimization using response surface methodology (RSM). Fuel, 94 (1). pp. 156-164. ISSN 0016-2361

Nour, A. H. and Abu Hassan, M. A. and Yunus, R. M. (2007) Characterization and demulsification of water-in-crude oil emulsions. Journal of Applied Sciences, 7 (10). pp. 1437-1441. ISSN 1812-5654 (print); 1812-5662 (online)

Nur, Hadi (2006) Modification of titanium surface species of titania by attachment of silica nanoparticles. Materials Sciences and Engineering B: Solid-State Materials for Advanced Technology, 133 (1-3). pp. 49-54. ISSN 0921-5107

Nur, Hadi and Manan, Amir Faizal Naidu Abdul and Wei, Lim Kheng and Muhid, Mohd Nazlan Mohd and Hamdan, Halimaton (2005) Simultaneous adsorption of a mixture of paraquat and dye by NaY zeolite covered with alkylsilane. Journal of Hazardous Materials, 117 (1). pp. 35-40. ISSN 0304-3894

Nur, Hadi and Ikeda, Shigeru and Ohtani, Bunsho (2004) Amphiphilic NaY zeolite particles loaded with niobic acid: Materials with applications for catalysis in immiscible liquid-liquid system. Reaction Kinetics and Catalysis Letters, 82 (2). pp. 255-261. ISSN 0133-1736/2004

Nur, Hadi and Ikeda, Shigeru and Ohtani, Bunsho (2004) Phase-boundary catalysts for acid-catalyzed reactions: The role of bimodal amphiphilic structure and location of active sites. Journal of Brazilian Chemical Society, 15 (5). pp. 719-724. ISSN 0103 - 5053

Nur, Hadi and Ramli, Zainab and Prasetyoko, Didik and Endud, Salasiah (2004) Sulfation: A simple method to enhance the catalytic activity of TS-1 in epoxidation of 1-octene with aqueous hydrogen peroxide. Catalysis communications, 5 (12). pp. 725-728. ISSN 1566-7367

Nur , Hadi and Ng, Yun Hau and Misnon, Izan Izwan and Hamdan, Halimaton and Muhid, Mohd Nazlan Mohd (2006) Hydrophobic fluorinated TiO2-ZrO2 as catalyst in epoxidation of 1-octene with aqueous hydrogen peroxide. Materials Letters, 60 (17-18). pp. 2274-2277. ISSN 0167-577X

Nur Atikah Mohidem, (2012) The catalytic activity enhancement and biodegradation potential of free laccase and novel sol-gel laccase in non-conventional solvents. Bioresource Technology, 114 . pp. 472-477. ISSN 0960-8524

Nur Farhana Jaafar, (2012) Photodecolorization of methyl orange over α-fe2o3-supported HY catalysts: the effects of catalyst preparation and dealumination. Chemical Engineering Journal, 191 . pp. 112-122. ISSN 1385-8947

Nurulbahiyah Ahmad Khairudin, (2013) Structurally conserved binding sites of hemagglutinin as targets for influenza drug and vaccine development. Journal of Chemical Information and Modeling, 53 (9). pp. 2423-2436. ISSN 1549-9596

Nuzul Hakimi W.M.W.S., (2012) Chemical compositions and antibacterial activity of the leaf and stem oils of piper porphyrophyllum (lindl.) N.E. Br. EXCLI Journal, 11 . pp. 399-406. ISSN 1611-2156

Olla, S. H. and Yahaya, A. H. and Nasef, M. M. (2015) Preparation and characterization of poly(3-hydroxybutyric acid)/poly(vinyl acetate) blend films. Asian Journal of Chemistry, 27 (3). pp. 979-983. ISSN 0970-7077

Ooi, Zingyi and Harruddin, Norlisa and Othman, Norasikin (2015) Recovery of kraft lignin from pulping wastewater via emulsion liquid membrane process. Biotechnology Progress, 31 (5). pp. 1305-1314. ISSN 8756-7938

Osman, (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Othman, M. H. D. and Ismail, Ahmad Fauzi and Mustafa, A. (2007) Proton conducting composite membrane from sulfonated poly(ether ether ketone) and boron orthophosphate for direct methanol fuel cell application. Journal of Membrane Science, 299 (1-2). pp. 156-165. ISSN 0376-7388

Othman, N. and Ahmad, A. and Piramali, M. A. (2009) Effect of electrolyte on synergism of anionic-surfactant mixture. Journal of Applied Membrane Science & Technology, 10 . pp. 13-19. ISSN 1823–366X

Othman, Norasikin and Chan, K. H. and Chiong, Tung and Mat, Hanapi and Goto, Masahiro (2006) Emulsion liquid membrane extraction of silver from photographic waste using tetramethylthiuram disulfide (TMTDS) as a mobile carrier. Journal of Applied Membrane Science & Technology, 3 . pp. 1-14. ISSN 1823–366X

Othman, Norasikin and Sadikin, Aziatul Niza and Malini, Hemah (2008) Stability analysis of water in oil emulsion in liquid membrane process. Journal of Chemical and Natural Resources Engineering , 2 . pp. 130-138. ISSN 1823-5255

Othman, M. H. D. and Ismail, A. F. and Mustafa, A. (2007) Physico-chemical study of sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell application. Malaysian Polymer Journal, 2 (1). pp. 10-28. ISSN 1823-7789

Othman, Mahamad Rizza and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2007) Process fault detection using hierarchical artificial neural network diagnostic strategy. Jurnal Teknologi (46F). pp. 11-26. ISSN 2180-3722

Othman, Norasikin and Ahmad, Azfar and Piramali, Mohd. Azwadi and Jaafar, Noraini and Zailani, Siti Nazrah (2010) Effect of electrical field on demulsification of water in oil emulsion in emulsion liquid membrane process. Journal of Materials Science and Engineering, 4 (10). pp. 51-55. ISSN 1934-8959 (Print); 1934-8967 (Electronic)

Othman, Norasikin and Djamal, R. and Mili, N. and Zailani, S. N. (2011) Removal of red 3BS Dye from wastewater using emulsion liquid membrane process. Journal of Applied Sciences, 11 (8). pp. 1406-1410. ISSN 1812-5654

Othman, Norasikin and Harruddin, Norlisa and Mohamed, Norul Fatiha and Raja Sulaiman, Raja Norimie and Ooi, Zingyi and Jusoh, Norela W. C. and Nasruddin, Nur Alina and Rashid, Roslina and Ali, Nora'aini and Sadikin, Aziatul Niza (2015) Recovery of synthetic dye red 3BS from simulated wastewater using supported liquid membrane process containing immobilized kerosene-tridodecylamine liquid membrane. Jurnal Teknologi, 74 (7). pp. 99-105. ISSN 0127-9696

Othman, Norasikin and Heng, Lingchui and Mohamed Noah, Norul Fatiha and Yi, Ooizing and Jusoh, Norela W C and Nasruddin, Nur Alina and Ali, Nora'aini and Hamzah, Sofiah (2015) Removal of phenol from wastewater by supported liquid membrane process. Jurnal Teknologi, 74 (7). pp. 117-121. ISSN 0127-9696

Othman, Norasikin and Jusoh, Norela and Idris, Ani and Nasruddin, Alina (2014) Characterization of liquid pineapple waste as carbon source for production of succinic acid. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 11-13. ISSN 0127-9696

Othman Che Puan, (2014) Effect of vehicular traffic volume and composition on carbon emission. Jurnal Teknologi, 70 (4). pp. 17-20. ISSN 0127-9696

Othman Che Puan, (2014) Measuring driver's percent-time-spent-following using a moving video recording technique. Applied Mechanics and Materials, 567 . pp. 736-741. ISSN 1660-9336

Othman Che Puan, (2014) Minor road traffic delays at priority junctions on low speed roads in suburban areas. Jurnal Teknologi, 70 (4). pp. 97-102. ISSN 0127-9696

P., Yogeswary and Mohd. Yusof, Mohd Rashid and Saidina Amin, Nor Aishah (2007) Degradation of phenol by catalytic ozonation. Journal of Chemical and Natural Resources Engineering, 2 . pp. 34-46. ISSN 1833-5255

Padaki, Mahesh and M. Isloor, Arun and Wanichapichart, Pikul and Ismail, Ahmad Fauzi (2012) Preparation and characterization of sulfonated polysulfone and N-phthloyl chitosan blend composite cation-exchange membrane for desalination. Desalination, 298 . pp. 42-48. ISSN 0011-9164

Peng, Yen Liew and Wan Alwi, Sharifah Rafidah and Jirí, Jaromír Klemes and Petar, Sabev Varbanov and Abdul Manan, Zainuddin (2013) Total site heat integration with seasonal energy availability. Chemical Engineering Transactions, 35 . pp. 19-24. ISSN 1974-9791

Peng, Yen Liew and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical analysis for total site sensitivity. Computer Aided Chemical Engineering, 31 . pp. 560-564. ISSN 1570-7946

Pereira, Valeen Rashmi and Isloor, Arun M. and Bhat, Udaya K. and Ismail, Ahmad Fauzi and Obaid, Abdulrahman and Fun, Hoong-Kun (2015) Preparation and performance studies of polysulfone-sulfated nano-titania (S-TiO2) nanofiltration membranes for dye removal. Royal SOC Chemistry, 5 (66). pp. 53874-53885. ISSN 2046-2069

Phneah, Swee Ling and Hassim, Mimi Haryani and Ng, Denny K. S. and Goh, Wuiseng (2015) Review on sustainability assessment of integrated biorefineries based on environmental, health and safety perspectives. Chemical Engineering Transactions, 45 . pp. 1399-1404. ISSN 2283-9216

Phoon, Li Yee and Mustaffa, Azizul Azri and Hashim, Haslenda and Mat, Ramli (2015) Flash point prediction of tailor-made green diesel blends using UNIFAC-based models. Chemical Engineering Transactions, 45 . pp. 1153-1158. ISSN 2283-9216

Piroozian, Ali and Ismail, Issham and Yaacob, Zulkefli and Babakhani, Parham and Ismail, Ahmad Shamsul Izwan (2012) Impact of drilling fluid viscosity, velocity and hole inclination on cuttings transport in horizontal and highly deviated wells. Journal of Petroleum Exploration and Production Technology, 2 (3). pp. 149-156. ISSN 2190-0558

Poh S.S., (2011) Assessment of catalytic activity and stability of bromelain-polyphenol complex in pineapple juice. Acta Horticulturae, 902 . pp. 547-554. ISSN 0567-7572

Pour, Raheleh Heidar and Soheilmoghaddam, Mohammad and Hassan, Azman and Bourbigot, Serge (2015) Flammability and thermal properties of polycarbonate/acrylonitrile-butadiene-styrene nanocomposites reinforced with multilayer graphene. Polymer Degradation and Stability, 120 . pp. 88-97. ISSN 0141-3910

Pourmand, N. and Sanagi, M. M. and Wan Ibrahim, W. A. and Salisu, A. (2015) Pre-concentration and determination of Pb(II) from water samples using modified multiwalled carbon nanotubes. Jurnal Teknologi, 76 (13). pp. 15-18. ISSN 0127-9696

Prasetyoko, Didik and Endud, Salasiah and Ramli, Zainab and Nur, Hadi (2005) Enhancement of catalytic activity of titanosilicalite-1 - Sulfated zirconia combination towards epoxidation of 1-octene with aqueous hydrogen peroxide. Reaction Kinetics and Catalysis Letters, 86 (1). pp. 83-89. ISSN 0133-1736

Prasetyoko, Didik and Ramli, Zainab and Endud, Salasiah and Nur, Hadi (2005) Preparation and characterization of bifunctional oxidative and acidic catalysts Nb2O5/TS-1 for synthesis of diols. Materials Chemistry And Physics, 93 (2-3). pp. 443-449. ISSN 0254-0584

Prasetyoko D., (2012) Phase transformation of rice husk ash in the synthesis of zsm-5 without organic template. ITB Journal of Science, 44A (3). pp. 250-262. ISSN 1978-3043

Qindeel R., Rabia Qindeela, and Ali, Jalil and Hussain, M. S. and Chaudhary, K. T. (2011) Detection and investigation of carbon ions induced by ND:YAG laser using SSNTDS. AIP Conference Proceedings, 1341 . pp. 205-209. ISSN 0094-243X

Qindeel R; Bin Ali, (2011) Carbon thin films deposition by KRF pulsed laser at different temperatures. Enabling Science and Nanotechnology, 1341 . pp. 199-204. ISSN 0929-6212

R., Dayana Amira and A. Rahman, Roshanida and Md. Illias, Rosli (2012) Effects of xylanase and cellulase production during composting of EFB and POME using fungi. International Journal of Engineering and Applied Sciences, 6 . pp. 292-295. ISSN 2010-3999

R. Arsat, (2011) Conductometric H2 gas sensor with doped and dedoped electropolymerized polyaniline nanostructures. Jurnal Teknologi, 55 (1). pp. 167-175. ISSN 0127–9696

Rafiziana Md. Kasmani, (2013) Experimental study on vented gas explosion in a cylindrical vessel with a vent duct. Process Safety and Environmental Protection, 91 (4). pp. 245-252. ISSN 0957-5820

Rafiziana Md. Kasmani, (2013) Fast turbulent flames in duct -vented gas explosion. Chemical Engineering Transactions, 32 . pp. 145-150. ISSN 1974-9791

Rahaman, M. S. A. and Ismail, A. F. and Mustafa, A. and Ng, B. C. and Abdullah, M. S. and Rahman, M. A. and Hasbullah, H. Infrared Studies On Thermally Stabilized Polyacrylonitrile (PAN) Fiber. Proceedings of Development in Polymer-Based Carbon Fibre Research in Malaysia . pp. 151-168.

Rahaman, M. S. A. and Ismail, Ahmad Fauzi and Mustafa, A. (2007) A review of heat treatment on polyacrylonitrile fiber. Polymer Degradation and Stability, 92 (8). pp. 1421-1432. ISSN 0141-3910

Rahbari-Sisakht, M. and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. (2012) Effect of different additives on the physical and chemical CO 2 absorption in polyetherimide hollow fiber membrane contactor system. Separation and Purification Technology, 98 . pp. 472-480. ISSN 1383-5866

Rahbari-Sisakht, M. and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. (2012) Effect of novel surface modifying macromolecules on morphology and performance of polysulfone hollow fiber membrane contactor for CO2 absorption. Separation and Purification Technology, 99 . pp. 61-68. ISSN 1383-5866

Rahim, Fariha L. M. and Hassim, Mimi Haryani and Mokhtar, Mutahharah M. (2015) Environmental assessment of ashes generated from medical waste incineration. Chemical Engineering Transactions, 45 . pp. 1699-1704. ISSN 2283-9216

Rahimi, Ahmad Nafais and Mustafa, Mohd. Faris and Zaine, Muhammad Zakwan and Ibrahim, Norazana and Ibrahim, Kamarul Asri and Yusoff, Nooryusmiza and Al-Mutairi, Eid M. and Abd. Hamid, Mohd. Kamaruddin (2015) Energy efficiency improvement in the natural gas liquids fractionation unit. Chemical Engineering Transactions, 45 . pp. 1873-1878. ISSN 2283-9216

Rahman, M. A. and Ismail, A. F. and Mustafa, A. and Ng, B. C. and Hasbullah, H. and Rahaman, M. S. A. and Abdullah, M. S. The Effect Of Coagulation Bath Temperature On The Mechanical Properties Of PAN-Based Carbon Fiber. Proceedings of Development in Polymer-Based Carbon Fibre Research in Malaysia . pp. 169-179.

Rahmat, A. R. and Day, R. J. (2003) Curing characteristics of unsaturated polyester/aramid reinforced composite : microwave vs. thermal energy. Jurnal Teknologi Siri Khas A (39A). pp. 83-96. ISSN 0127-9696

Rahmat, A. R. and Maradzi, M. A. (2008) Mechanical properties of rotational moulded empty fruit bunch fiber reinforced polyethylene composites. Journal of Chemical & Natural Resources Engineering, 2 . pp. 41-52. ISSN 1823-5255

Ramlan Abd. Aziz, (2014) Detergency stability and particle characterization of phosphate-free spray dried detergent powders incorporated with palm C16 methyl ester sulfonate (C16MES). Journal of Oleo Science, 63 (6). pp. 585-592. ISSN 1347-3352

Ramlan Abdul Aziz, (2014) Modeling and uncertainty analysis for pilot scale monoclonal antibody production. Pharmaceutical Engineering, 34 (4). pp. 40-55. ISSN 0273-8139

Ramlan Aziz, (2014) Graphical tools for production planning in small medium industries (SMIs) based on pinch analysis. Journal of Manufacturing Systems, 33 (4). pp. 639-646. ISSN 0278-6125

Ramlan Aziz, (2013) Pinch analysis for production planning in manufacturing industries. Chemical Engineering, 120 (8). pp. 40-45. ISSN 0009-2460

Ramli, Nur Aainaa Syahirah and Amin, Nor Aishah Saidina (2015) A new functionalized ionic liquid for efficient glucose conversion to 5-hydroxymethyl furfural and levulinic acid. Journal of Molecular Catalysis A: Chemical, 406 . pp. 113-121. ISSN 1381-1169

Ramli, Nur Aainaa Syahirah and Saidina Amin, Nor Aishah (2015) Fe/HY zeolite as an effective catalyst for levulinic acid production from glucose: characterization and catalytic performance. Applied Catalysis B: Environmental, 163 . pp. 487-498. ISSN 0926-3373

Ramli Mat, (2014) Influence of hydrophilic polymer on pure water permeation, permeability coefficient, and porosity of polysulfone blend membranes. Advanced Materials Research, 931-93 . pp. 168-172. ISSN 1022-6680

Ramli Mat, (2014) Microwave assisted pyrolysis of waste biomass resources for bio-oil production. Applied Mechanics and Materials, 554 . pp. 307-311. ISSN 1660-9336

Ramli Mat, (2014) A review on microwave assisted pyrolysis of coal and biomass for fuel production. Renewable and Sustainable Energy Reviews, 39 . pp. 555-574. ISSN 1364-0321

Rashid, M. and Rahmalan, A. and Khalik, A. (1994) Nilai nisbah klorida/ bromin dan etil dalam minyak petrol tempatan. Jurnal Teknologi, 23 . pp. 1-6. ISSN 2180-3722

Rauf, Zulfikri A. and Ilias, Rosli Md. and Mahadi, Nor Muhammad and Hassan, Osman (2008) Experimental design to optimization of beta cyclodextrin production from ungelatinized sago starch. European Food Research and Technology, 226 (6). pp. 1421-1427. ISSN 1438-2385

Razak, N.A. and Arshad, K.A. and Ismail , A.F. and Aziz, M. and Sanip, S.M. (2003) Simulation Of Carbon Nanotubes For Hydrogen Storage Using Neural Network: A Preliminary Study. Proceedings of Advances in Malaysian Fuel Cell Research and Development . pp. 179-186.

Razak, N.A. and Arshad, K.A. and Rahman , A.A. and Ismail , A.F. and Sanip, S.M. Artificial Neural Network Modeling Of Hydrogen Uptake Based On Carbon Surface Area. Proceedings of Advances in Fuel Cell Research and Development in Malaysia . pp. 165-169.

Razak, M. M. A. and Mustafa, A. and Nasri, N. S. and Songip, A. R. An investigation of a catalytically-ignited autothermal reformer pre-heating system for hydrogen production in a fuel cell powered vehicle. Proceeding of Advances in Malaysian Fuel Cell Research and Development, . pp. 167-174.

Razak, M. M. A. and Mustafa, A. and Nasri, N. S. and Songip, A.R Catalytic combustion of hydrogen and methane for autothermal reformer start-up ignition system. Proceeding of Advances in Fuel Cell Research and Development in Malaysia . pp. 159-164.

Razali, Firdausi and M., Mailin (2006) High performance phenol degrading microorganisms isolated from wastewater and oil-contaminated soil. Malaysia Journal Of Microbiology, 2 (2). pp. 32-36. ISSN 9834240708

Razali, Nur Myra Rahayu and Idris, Ani and Mohd Yusof, Khairiyah (2008) Prediction of pore size of ultrafiltration membrane by using artificial neural network (ANN). Jurnal Teknologi, F (49). pp. 229-235. ISSN 0127-9696

Razali, Firdausi and Moo-Young, Murray and Scharer, Jeno M. and Glick, Bernard R. (2007) Review : overexpression of protein under transcriptional regulation of lambda pL promoter system in Escherichia coli: consequences and bioprocess improvement approaches. Journal of Chemical and Natural Resources Engineering, 1 . pp. 22-39. ISSN 1823-5255

Razi M.M., (2011) Physical properties of cullet-clay ceramic. AIP Conference Proceedings, 1328 . pp. 299-301. ISSN 0094-243X

Reddy, A. V. Bhaskar and Jaafar, J. and Majid, Z. Abdul and Aris, A. and Umar, K. and Talib, J. and Madhavi, G. (2015) Relative efficiency comparison of carboxymethyl cellucose (CMC) stabilized Fe-0 and Fe-0/Ag nanoparticles for rapid degradation of chlorpyrifos in aqueous solutions. Digest Journal of Nanomaterials and Biostructures, 10 (2). pp. 331-340. ISSN 1842-3582

Riadh Sahnoun, (2014) An MP2 investigation on the encapsulation of H-2 and 2H(2) inside C-50 fullerene. Chemical Physics Letters, 594 . pp. 58-63. ISSN 0009-2614

Riaz, Amjad and Zahedi, Gholamreza (2012) Embedding methane steam reformer and methanol reactor into a single reactor. Computer Aided Chemical Engineering, 31 . pp. 1170-1174. ISSN 1570-7946

Ridha, Firas Noori and M. Yunus, Rosli and Rashid, Mohd. and Ismail, Ahmad Fauzi (2007) Thermal transient behavior of an ANG storage during dynamic discharge phase at room temperature. Applied Thermal Engineering, 27 (1). pp. 55-62. ISSN 1359-4311

Ridha, Firas Noori and Yunus, Rosli M. and Mohd., Rashid and Ismail, Ahmad Fauzi (2007) Dynamic delivery analysis of adsorptive natural gas storages at room temperature. Fuel Processing Technology, 88 (4). pp. 349-357. ISSN 0378-3820

Ridha, Firas Noori and Yunus, Rosli M. and Mohd., Rashid and Ismail, Ahmad Fauzi (2007) Thermal analysis of adsorptive natural gas storages during dynamic charge phase at room temperature. Experimental Thermal and Fluid Science, 32 (1). pp. 14-22. ISSN 0894-1777

Ripin, Adnan and Abdul Mudalip, Siti Kholijah and Mohd. Yunus, Rosli (2008) Effects of ultrasonic waves on enhancement of relative volatilities in methanol-water mixtures. Jurnal Teknologi (48F). pp. 61-73. ISSN 0127-9696

Ripin, Adnan and Abdul Mudalip, Siti Kholijah and Sukaimi, Zairina and Mohd. Yunus, Rosli and Abdul Manan, Zainuddin (2009) Effects of ultrasonic waves on vapor-liquid equilibrium of an azeotropic mixture. Separation Science and Technology, 44 (11). pp. 2707-2719. ISSN 0149-6395

Riyadh S. Al-Turaihi, (2013) Experimental investigation of various solid particle materials on the steady state gas-solid fluidized bed system. Journal of Basic and Applied Scientific Research, 3 (7). pp. 293-304. ISSN 2090-4304

Robiah Adnan, (2013) A new approach for developing comprehensive agricultural drought index using satellite-derived biophysical parameters and factor analysis method. Natural Hazards, 65 (3). pp. 1249-1274. ISSN 0921-030X

Rohah Abd. Majid, (2014) Development of rigid bio-based polyurethane foam reinforced with nanoclay. Composites Part B: Engineering, 67 . pp. 521-526. ISSN 1359-8368

Rohah Abd. Majid, (2014) Effects of silicone surfactant on the water absorption and surface morphology of rigid palm oil-based polyurethane foam. Applied Mechanics and Materials, 554 . pp. 185-188. ISSN 1660-9336

Rohah Abd. Majid, (2014) Effects of stone powder on water absorption and Biodegradability of low density polyethylene/palm pressed fibre composite film. Applied Mechanics and Materials, 554 . pp. 123-127. ISSN 1660-9336

Rohani, (2012) Comparison of Eddy Dissipation Model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 384-391. ISSN 0094-243X

Rohani, Rosiah and Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd Dahlan, Khairul Zaman (2007) Effect of reaction conditions on electron induced graft copolymerization of styrene onto poly(ethylene-co-tetrafluoroethylene) films: Kinetics study. Chemical Engineering Journal, 132 (1-3). pp. 27-35. ISSN 1385-8947

Rohani, Rosiah and Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd. Dahlan, Khairul Zaman (2007) Effect of reaction conditions on electron induced graft copolymerization of styrene onto poly(ethylene-co-tetrafluoroethylene) films : kinetics study. Chemical Engineering Journal, 132 (1-3). pp. 27-35. ISSN 1385-8947

Roshafima, R. A. and Wan Aizan, W. A. R. and Naterah, Z. (2006) Sago starch and sago waste biodegradable films. CRAUN Sago Research Journal, 2 . pp. 1-8. ISSN 0126-6039

Roshafima Rasit Ali, (2013) Tapioca starch biocomposite for disposable packaging ware. Chemical Engineering Transactions, 32 . pp. 1711-1716. ISSN 1974-9791

Roshanida Abd. Rahman, (2014) Assessment of sewage sludge bioremediation at different hydraulic retention times using mixed fungal inoculation by liquid-state bioconversion. Environmental Science and Pollution Research, 21 (2). pp. 1178-1187. ISSN 0944-1344

Roshanida Abdul Rahman, (2014) Isolation of pectin from Nephrolepis biserrata leaves at different extraction time. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 17-19. ISSN 0127-9696

Roshanida Abdul Rahman, (2014) Optimization of alkaline pretreatment conditions of oil palm fronds in improving the lignocelluloses contents for reducing sugar production. Romanian Biotechnological Letters, 19 (1). pp. 9006-9018. ISSN 1224-5984

Roshanida Abdul Rahman, (2014) Optimization of pectin extraction from Nephrolepis biserrata leaves using response surface methodology. Applied Mechanics and Materials, 625 . pp. 920-923. ISSN 1660-9336

Roshanida Abdul Rahman, (2014) Precipitation of cellulase and xylanase for cross-linked enzyme aggregates. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 17-20. ISSN 2180-3722

Rosli Md. Illias, (2013) Cloning and in silico characterization of two signal peptides from pediococcus pentosaceus and their function for the secretion of heterologous protein in lactococcus lactis. Biotechnology Letters, 35 (2). pp. 233-238. ISSN 0141-5492

Rosli Md. Illias, (2014) Comparison of RNA extraction methods for transcript analysis from the psychrophilic yeast, Glaciozyma antarctica. Malaysian Applied Biology, 43 (2). pp. 71-80. ISSN 0126-8643

Rosli Md. Illias, (2014) Efficient removal of lignin with the maintenance of hemicellulose from kenaf by two-stage pretreatment process. Carbohydrate Polymers, 99 . pp. 447-453. ISSN 0144-8617

Rosli Md. Illias, (2014) Growth phase-dependent proteomes of the malaysian isolated lactococcus lactis dairy strain M4 using label-free qualitative shotgun proteomics analysis. Scientific World Journal . ISSN 1537-744X

Rosli Md. Illias, (2014) Molecular cloning, expression and characterisation of Afp4, an antifreeze protein from Glaciozyma antarctica. POLAR BIOLOGY, 37 (10). pp. 1495-1505. ISSN 0722-4060

Rosli Md. Illias, (2011) A mutant l-asparagise ii signal peptide improves the secretion of recombinant cyclodextrin glucanotransferase and the viability of escherichia coli. Biotechnology Letters, 33 . pp. 999-1005. ISSN 0141-5492

Rosli Md. Illias, (2014) Novel synthetic signal peptides for the periplasmic secretion of green fluorescent protein in Escherichia coli. Annals of Microbiology, 64 (2). pp. 543-550. ISSN 1869-2044

Roslina Rashid, (2014) Enzymatic hydrolysis of used-frying oil using Candida rugosa lipase. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 101-107. ISSN 2180-3722

Roslina Rashid, (2014) Enzymatic hydrolysis of used-frying oil using Candida rugosa lipase in solvent-free system. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 75-80. ISSN 0127-9696

Rozainee, M. and S., P. Ngo and Salema, A. A. and K., G. Ta (2008) Renewable energy sources from biomass through incineration. The Ingenieur, 37 . pp. 13-23. ISSN 0128-4347

Rozainee, M. and S. , P. Ngo and Salema, A. A. and K., G. Tan (2008) Study on the quality of rice husk ash at different fluidising velocity in a fluidised bed combustor. The Journal of Solid Waste Technology and Management, 34 (1). pp. 1-10. ISSN 1088-1697

Rozainee, M. and S., P. Ngo and Salema, Arshad A. and K., G. Tan (2008) Study on freeboard temperature profile during combustion of rice husk in a fluidized bed combustor. Journal of Chemical and Natural Resources Engineering - Safer and Cleaner Technology, 2 (Sp ed.). pp. 17-27. ISSN 1823-5255

Rozali N.E.M., (2012) Design of hybrid power systems with energy losses. Chemical Engineering Transactions, 29 . pp. 121-126. ISSN 1974-9791

Rusmili S.H.A., (2012) Rapid synthesis and characterization of nanosodalite synthesized using rice husk ash. Malaysian Journal of Analytical Sciences, 16 (3). pp. 247-255. ISSN 1394-2506

S. Chelliapan, (2011) Application of aerobic biotechnology for pharmaceutical wastewater treatment. IIOAB Journal, 2 (1). pp. 13-21. ISSN 0976-3104

S. R., Yaziz (2011) A comparative study on box-jenkins and garch models in forecasting crude oil prices. Journal of Applied Sciences, 11 (7). pp. 1129-1135. ISSN 1812-5654

Saat, (2012) Characterisation of aerosol combustible mixtures generated using condensation process. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara T. (2012) Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications. Polymer Degradation and Stability, 97 (8). pp. 1432-1437. ISSN 0141-3910

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2012) Electron beam irradiation of low-density polyethylene filled with metal hydroxides for wire and cable applications. Polymer Bulletin, 69 (9). pp. 1103-1114. ISSN 0170-0839

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2015) Properties of ethylene-vinyl acetate filled with metal hydroxide. Journal of Elastomers and Plastics, 47 (1). pp. 88-100. ISSN 0095-2443

Sadeghipour, (2012) Advances in aluminum powder usage as an energetic material and applications for rocket propellant. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Sadighi, Sepehr and Shirvani, Mansoor and Ahmad, Arshad (2011) Rotary cement kiln coating estimator: Integrated modelling of kiln with shell temperature measurement. Canadian Journal of Chemical Engineering, 89 (1). pp. 116-125. ISSN 1939-019X

Sadikin, Aziatul Niza and Ab. Muis, Zarina and Saha, Basu (2007) Removal of chromium (VI) with Aliquat 336 impregnated in Amberlite XAD-16. I. batch mode sorption studies. Jurnal Teknologi , 46 (F). pp. 1-10. ISSN 2180-3722

Sadikin, Aziatul Niza and Mohd. Nawawi, Mohd. Ghazali and Othman, Norasikin and Ali, Roshafima Rasit and Asli, Umi Aisah (2015) Removal of oily wastewater using chitosan-filled filter media. Jurnal Teknologi, 74 (7). pp. 111-115. ISSN 0127-9696

Saeidi, Samrand and Nikoo, Maryam Khoshtinat and Mirvakili, Azadeh and Bahrani, Samaneh (2015) Recent advances in reactors for low-temperature Fischer-Tropsch synthesis: process intensification perspective. Reviews in Chemical Engineering, 31 (3). pp. 209-238. ISSN 0167-8299

Said, (2012) Effect of palm methyl ester - diesel blends performance and emission of a single-cylinder direct-injection diesel engine. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 562-570. ISSN 0094-243X

Said, (2012) Modelling of diesel engine fuelled with biodiesel using engine simulation software. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 307-313. ISSN 0094-243X

Saidi, Hamdani and Sutrasno, Sutrasno and Abdul Aziz, Ramlan (1993) Program simulasi pemisahan campuran gas multikomponen melalui permeator membran. Jurnal Teknologi, 21 . pp. 70-77. ISSN 2180-3722

Saidin, M. A. R. and Ismail, A. F. and Aziz, M. (2007) Optimization of home-built plasma enhanced chemical vapour deposition (PECVD) system. Journal of Solid State Science And Technology Letters, 14 (2). p. 67. ISSN 0128-8393

Saidina Amin, Nor Aishah and Ali, Asmadi (2001) Characterization Of Modified HZSM-5 With Gallium And Its Reactivitiy In Direct Conversion Of Methane To Liquid Hydrocarbons. Jurnal Teknologi F (35F). pp. 21-30. ISSN 0127-9696

Saidina Amin, Nor Aishah and Istadi, Istadi (2007) Modelling and optimization of catalytic-dielectric barrier discharge plasma reactor for methane and carbon dioxide conversion using hybrid artificial neural network - genetic algorithm technique. Chemical Engineering Sciences, 62 (23). pp. 6568-6581. ISSN 0009-2509

Saidina Amin, Nor Aishah and Soon, Ee Peng (2008) Gibbs energy minimization method for analysis of methane oxidation to higher hydrocarbons. Jurnal Teknologi (48F). pp. 33-50. ISSN 0127-9696

Saidina Amin, Nor Aishah and Tung, Chun Yaw (2007) Thermodynamic equilibrium analysis of combined carbon dioxide reforming with partial oxidation of methane to syngas. International Journal of Hydrogen Energy, 32 (12). pp. 1789-1798. ISSN 0360-3199

Saidina Amin, Nor Aishah (2004) Improved performance of W/HZSM-5 catalysts for dehydroamatization of methane. Journal of Natural Gas Chemistry, 13 (3). pp. 148-159. ISSN 1003-9953

Saidina Amin, Nor Aishah (2004) Screening of mgo-and ceo2 based catalysts for carbon dioxide oxidative coupling of methane to c2 hydrocarbons. Journal of Natural Gas Chemistry, 13 (1). pp. 23-35. ISSN 1003-9953

Saidina Amin, Nor Aishah and Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Wan Omar, Wan Nor Nadyaini and Kok, Giap Haw (2012) Bio-oils and diesel like fuel derived from alkaline treated empty fruit bunch (EFB). International Journal of Biomass and Renewables, 1 (1). pp. 6-14. ISSN 2289-1692

Saidina Amin, Nor Aishah and Ya' aini, N. and Misson, M. and Haron, R. and Mohamed, M. (2010) Enyzmed pretreated empty pabn fruit bunch for biofuel production. Journal of Applied Sciences, 10 (12). pp. 1181-1186. ISSN 1812-5654 (Print); 1812-5662 (Electronic)

Saidina Amin, Nor Aishah and Ngadi, Norzita and Prasetyoko, Didik (2003) Conversion of methane using Mo-Mfi zeolite catalyst. Jurnal Teknologi C (39C). pp. 29-41. ISSN 0127-9696

Saidina Amin, Nor Aishah and Zakaria, Zaki Yamani (2003) Optimization of oxidative coupling of methane using response surface methodology. Jurnal Teknologi F (39F). pp. 35-52. ISSN 0127-9696

Saim, Nursharina and Hassan, Hashim (2008) Preparation of pervaporation membrane using a-type zeolite filled chitosan membrane for the separation of isopropanol/water mixtures. Jurnal Teknologi, F (49). pp. 197-205. ISSN 0127-9696

Salama, Mohamed and Mahdy, Mahmoud Abd. Elghany and Mohamed, Amina and Mohamed, Aref T. and Keleb, Eseldin I. and Omar, Assad A. and Elmarzugi, Nagib Ali (2015) Formulation and evaluation of Ketoconazole polymeric films for topical application. Journal of Applied Pharmaceutical Science, 5 (5). pp. 28-32. ISSN 2231-3354

Salasiah Endud, (2013) Oxidative dimerization of o-aminophenol by heterogeneous mesoporous material modified with biomimetic salen-type copper(ii) complex. Catalysis Letters, 143 (3). pp. 282-288. ISSN 1011-372X

Salema, Arshad and Hassan, Azman and Ani, Farid Nasir and Abu Bakar, Aznizam (2010) Oil-palm fiber as natural reinforcement for polymer composites. Society of Plastics Engineers . pp. 1-3.

Salisu, Ahmed and Sanagi, Mohd. Marsin and Naim, Ahmedy Abu Bu and Abd. Karim, Khairil Juhanni (2015) Removal of methylene blue dye from aqueous solution using alginate grafted polyacrylonitrile beads. Der Pharma Chemica, 7 (2). pp. 237-242. ISSN 0975-413X

Saman, Norasikin and Johari, Khairiraihanna and Mat, Hanapi (2015) Removal of elemental mercury from gas stream using sulfur-functionalized silica microspheres (S-SMs). Clean Technologies and Environmental Policy, 17 (1). pp. 39-47. ISSN 1618-954X

Samsudin, Sani Amril and Hassan, Azman and Md. Akil, Munirah and Syed Jamaluddin, Syed Mustafa (2006) Chemical resistance evaluation of polystyrene / polypropylene blends : effect of blend compositions and SEBS comtent. Malaysian Polymer Journal, 1 (1). pp. 11-24. ISSN 1823-7789

Samsudin, Sani Amril and Hassan, Azman and Mokhtar, Munirah and Syed Jamaludin, Syed Mustafa (2003) Effect of SEBS on impact strength and flexural modulus of polystyrene/polypropylene blends. Jurnal Teknologi Siri Khas A (39A). pp. 35-44. ISSN 0127-9696

Samsuri, A. and Mohd. Sharip, M. N. M. (2008) Used cooking oil as a source for biodiesel blend. Journal of Chemical and Natural Resources Engineering, 2 . pp. 40-53. ISSN 1823-5255

Samsuri, Ariffin and Zoveidavianpoor, Mansoor and Shadizadeh, Seyed Reza (2012) A review on conventional candidate-well selection for hydraulic fracturing in oil and gas wells. International Journal of Engineering and Technology, 2 (1). pp. 51-60. ISSN 2049-3444

Samsuri, Ariffin (1992) A review of modelling as a tool in charge-gun performance and casing damage studies. Buletin FKKKSA, 6(1) (4-9). ISSN 0128-0740

Samsuri, Ariffin Ahli Jawatankuasa Peristilahan Kejuruteraan Antara Universiti.

Samsuri, Ariffin (1992) Penetration depth consideration for better perforation performance. Buletin FKKKSA, 6(2) . pp. 4-11. ISSN 0128-0740

Samsuri, Ariffin Sand particle produced by unstable perforated wellbore. Computer Methods and Advance in Geomechanics, Siriwardane & Zaman (eds), 1994 Bakelma, Rotterdam .

Samsuri, Ariffin (1991) Stress around perforation. Buletin FKKKSA, 5 (2). pp. 13-23. ISSN 0128-0740

Samsuri, Ariffin and Chuong, Pham Vu Optimize Production Through Reservoir Rock Compaction Control. Jurnal Teknologi, 31(F): 31-43 , Universiti Teknologi Malaysia .

Samsuri, Ariffin and Idris, Ahmad Kamal and Ismail, Issham (1993) Pembangunan Projek Perumahan Dalam Kawasan Bekas Lapangan Minyak. Buletin FKKKSA, 7(1) . pp. 4-9. ISSN 0128-0740

Samsuri, Ariffin and Irawan, Sonny (2005) Beneficiation of an andrassy and mansuli bentonite as a drilling mud material. Lewigas Journal (National Oil & Gas Indonesian Journal, December 2005) . (Submitted)

Samsuri, Ariffin and Irawan, Sonny Utilization of Treated Malaysian Local Bentonite For Drilling Mud Material Cost Saving. International Journal of Engineering (IJE), Iran, December 2002 .

Samsuri, Ariffin and Ismail, Issham and Abdul Latif, Irwan Potensi Kanji Sagu, Kanji Ubi Kayu, Dan Abu Kelapa Sawit Sebagai Pengawal Kehilangan Bendalir. Jurnal Teknologi, 30(F): 25-38, Universiti Teknologi Malaysia .

Sanagi, M. M. and See, H. H. (2005) High temperature liquid chromatography on a poly(styrene-divinylbenzene) stationary phase. JOURNAL OF LIQUID CHROMATOGRAPHY & RELATED TECHNOLOGIES, 28 . pp. 3065-3076. ISSN 1082-6076

Sanip, Suhaila M. and Sulaiman, Yusran and Buang, Nor Aziah and Aziz, Madzlan and Abdul Majid, Zaiton and Ismail, Ahmad Fauzi Surface Modification Of Carbon Materials For Hydrogen Storage. Proceedings of Advances in Fuel Cell Research and Development in Malaysia . pp. 180-187.

Sanip, S. M. and Ismail, A. F. and Goh, P. S. and Mohd Norddin, Muhammad Noorul Anam and Soga, T. and Tanemura, M. and Yasuhiko, H. (2012) Carbon nanotubes based mixed matrix membrane for gas separation. Advanced Materials Research, 364 . pp. 272-277. ISSN 1662-8985

Sanip , S. M. and Abidin, Z. R. Z. and Buang, N. and Aziz, M. and Ismail, Ahmad Fauzi (2004) Effects of heat treatment on synthetic graphites for carbon nanotubes synthesis. International Journal of Nanoscience , 3 (4-5). pp. 671-675. ISSN 0219-581X

Saqr, (2012) Highly-resolved large Eddy simulation of the nonreacting flow in an asymmetric vortex combustor. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 400-408. ISSN 0094-243X

Sarmidi, Mohamad Roji and Ali El-Enshasy, Hesham Ali Metwally (2012) Biotechnology for wellness industry: concepts and biofactories. International Journal of Biotechnology for Wellness Industries (IJBWI), 1 (1). pp. 3-28. ISSN 1927-3037

Sarmidi, Mohammad Roji and El Enshasy, Hesham A. and Abdul Hamid, Mariani (2009) Oil palm: the rich mine for pharma, food, feed and fuel industries. American-Eurasian Journal of Agriculture & Environmental Science, 5 (6). pp. 767-776. ISSN 1818-676

Sasan Parniani, (2011) Compressive strength of high volume slag cement concrete in high temperature curing. Advanced Materials Research, 287-29 . pp. 793-796. ISSN 1022-6680

Saufi, S. M. and Ismail, A. F. (2004) Fabrication of carbon membranes for gas separation - a review. Carbon, 42 . pp. 241-259.

Sepehr Sadighi, (2012) Dynamic simulation of a pilot scale vacuum gas oil hydrocracking unit by the space-time CE/SE method. Chemical Engineering & Technology, 35 (5). pp. 919-928. ISSN 0930-7516

Sepehr Sadighi, (2012) Effect of lump partitioning on the accuracy of a commercial vacuum ga oil hydrocracking model. International Journal of Chemical Reactor Engineering, 10 . pp. 1-23. ISSN 1542-6580

Setiabudi, H. D. and Abdul Jalil, Aishah and Triwahyono, Sugeng (2012) Ir/Pt-HZSM5 for n-pentane isomerization: effect of iridium loading on the properties and catalytic activity. Journal of Catalysis, 294 . pp. 128-135. ISSN 0021-9517

Shaharuddin Salleh, (2013) Improvement of element creation procedure for generating initial triangular unstructured mesh for radiative heat transfer modelling. International Review On Modelling and Simulations, 6 (5). pp. 1649-1656. ISSN 1974-9821

Shahrir Hashim, (2013) Core-shell polymers: a review. RSC Advances, 3 (36). pp. 15543-15565. ISSN 2046-2069

Shahrir Hashim, (2014) Effect of oil palm empty fruit bunch-grafted-poly(acrylic acid-co-acrylamide) hydrogel preparations on plant growth performance. Advanced Materials Engineering and Technology II, 594-59 . pp. 236-239. ISSN 1013-9826

Shahrir Hashim, (2013) Synthesis, characterization, and morphology study of poly(acrylamide-co-acrylic acid)-grafted-poly(styrene-co-methyl methacrylate) "raspberry"-shape like structure microgels by pre-emulsified semi-batch emulsion polymerization. Journal of Colloid and Interface Science, 391 . pp. 86-94. ISSN 0021-9797

Shakaib, M. and Ahmed, I. and Rosli, M. Yunus and Idris, Ani and Hussain, A. (2012) Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes. Journal of Applied Polymer Science, 128 (5). pp. 3346-3355. ISSN 0021-8995

Shakaib, Muhammad and Ahmed, Iqbal and M. Yunus, Rosli and Idris, Ani (2012) Effect of added monosodium glutamate on characteristics of polyamide dope solutions. Journal of Macromolecular Science Part B-Physics, 51 (10). pp. 2049-2063. ISSN 0022-2348 (Print); 1525-609X (Electronics)

Shamsuddin, Mustaffa and M Nur, Abdul Malik and M Yamin, Bohari (2005) N-[2-(diphenylphosphanyl)benzylidene]-4-methylaniline. Acta crystallographica section e-structure reports online, 61 . pp. 2263-2264. ISSN 16005368

Sharidan Shafie, (2013) Constant heat flux solution for mixed convection boundary layer viscoelastic fluid. Heat and Mass Transfer, 49 (2). pp. 163-171. ISSN 0947-7411

Sharidan Shafie, (2013) Unsteady mhd mixed convection flow of a micropolar fluid along an inclined stretching plate. Heat Transfer - Asian Research, 42 (2). pp. 89-99. ISSN 1099-2871

Sharidan Shafie, (2013) Unsteady mhd mixed convection stagnation-point flow in a micropolar fluid on a vertical surface in a porous medium with soret and dufour effects. Heat Transfer Research, 44 (7). pp. 603-620. ISSN 1064-2285

Sharifah Rafidah Wan Alwi, (2013) Centralised utility system planning for a total site heat integration network. Computers & Chemical Engineering, 57 . pp. 104-111. ISSN 0098-1354

Sharifah Rafidah Wan Alwi, (2014) Electricity load reduction in hybrid power systems using power pinch analysis. Computer Aided Chemical Engineering, 33 . pp. 1495-1500. ISSN 1570-7946

Sharifah Rafidah Wan Alwi, (2014) Kinetic and equilibrium study of Ni(II) sorption from aqueous solutions onto Peganum harmala-L. International Journal of Environmental Science and Technology, 11 (7). pp. 1835-1844. ISSN 1735-1472

Sharifah Rafidah Wan Alwi, (2014) Minimum water network design for fixed schedule and cyclic operation batch processes with minimum storage capacity and inter-connections. Journal of Cleaner Production, 77 . pp. 65-78. ISSN 0959-6526

Sharifah Rafidah Wan Alwi, (2014) Optimal sizing of hybrid power systems using power pinch analysis. Journal of Cleaner Production, 71 . pp. 158-167. ISSN 0959-6526

Sharifah Rafidah Wan Alwi, (2013) Optimisation of pumped-hydro storage system for hybrid power system using power pinch analysis. Chemical Engineering Transactions, 35 . pp. 85-90. ISSN 1974-9791

Sharifah Rafidah Wan Alwi, (2013) Septa-a new numerical tool for simultaneous targeting and design of heat exchanger networks. Computers & Chemical Engineering, 57 . pp. 30-47. ISSN 0098-1354

Sharipah Alwiah Syed Abdul Rahaman, (2014) Plant protein hydrolysates from soybean and rice grain as a supplement for medium in human skin fibroblast 1184 cell culture. Advances in Environmental Biology, 8 (3 SPEC). pp. 838-843. ISSN 1998-1066

Sharpe, I. D. and Ismail, A. F. and Shilton, S. J. (1999) A Study of Extrusion Shear and Forced Convection Residence Time in The Spinning of Polysulfone Hollow Fiber Membranes for Gas Separation. Separation and Purification Technology, 17 (2). pp. 101-109. ISSN 1383-5866

Shayganpour, (2012) Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1264-1270. ISSN 0094-243X

Shehu, (2012) Optimization of thermo-alkaline disintegration of sewage sludge for enhanced biogas yield. Bioresource Technology, 114 . pp. 69-74. ISSN 0960-8524

Shenvi, Seema S. and A. Rashid, Suraya and Ismail, Ahmad Fauzi and Kassim, Mohd. Azraai and M. Isloor, Arun (2012) Preparation and characterization of PPEES/chitosan composite nanofiltration membrane. Desalination, 315 (SI). pp. 135-141. ISSN 0011-9164

Shenvi, Seema S. and Isloor, Arun M. and Ismail, Ahmad Fauzi and Shilton, Simon J. and Al Ahmed, Amir (2015) Humic acid based biopolymeric membrane for effective removal of methylene blue and rhodamine B. Industrial and Engineering Chemistry Research, 54 (18). pp. 4965-4975. ISSN 0888-5885

Sheriff, (2012) Effect of semi-circular wavy liner on performance of journal bearing. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 571-577. ISSN 0094-243X

Shilton, S. J. and Ismail, A. F. and Gough, P. J. and Dunkin, I. R. and Gallivan, S. L. (1997) Molecular Orientation and the Performance of Synthetic Oolymeric Membranes for Gas Separation. Polymer, 38 (9). pp. 2215-2220. ISSN 0032-3861

Shreeshivadasan a/l Chelliapan, (2011) Tolerance of the antibiotic tylosin on treatment perfomance of an up-flow aerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Shu, Chin Lee and Lintang, Hendrik Oktendy and Leny Yuliati, Leny Yuliati (2012) A urea precursor to synthesize carbon nitride with mesoporosity for enhanced activity in the photocatalytic removal of phenol. Chemistry-An Asian Journal, 7 (9). pp. 2139-2144. ISSN 8756-758X

Shukri, M.I. and Songip, A.R. and Ahmad, A. and Nasri, N.S. (2004) Simulation Study Of Methane Autothermal Reforming For Hydrogen Production. Proceedings of Advances in Malaysian Fuel Cell Research and Development . pp. 149-158.

Sian, H. K. and Said, M. and Hassan, O. and Kamaruddin, K. and Ismail, A. F. and A. Rahman, R and Nik Mahmood, N. A. and Md. Illias, R (2005) Purification and characterization of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. G1. Process Biochemistry, 40 . pp. 1101-1111.

Sidik, (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 650-658. ISSN 0094-243X

Sidik D.A.B., (2012) Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid. Bioresource Technology . ISSN 0960-8524

Sidik N.A.C., (2011) Prediction of dynamics of solid particles using Lattice Boltzmann method. International Review of Mechanical Engineering (IREME), 5 (7). pp. 1235-1240. ISSN 1970-8734

Sie, Ting Tan and Wai, Shin Ho and Hashim, Haslenda and Chew, Tin Lee and Taib, Mohd. Rozainee and Chin, Siong Ho (2015) Energy, economic and environmental (3E) analysis of waste-to-energy (WTE) strategies for municipal solid waste (MSW) management in Malaysia. Energy Conversion and Management, 102 . pp. 111-120. ISSN 0196-8904

Sin, Lee Tin and Ng, Lin-Huey and Bee, Soo-Tueen and Tee, Tiam-Ting and Rahmat, Abdul Razak and He, Wei (2015) Factorial design investigation on two-way quaternary factors of thermal aging of chlorinated nitrile latex tensile properties. Journal of Elastomers and Plastics, 47 (3). pp. 232-247. ISSN 0095-2443

Sin, Lee Tin and Wan Abdul Rahman, Wan Aizan and Rahmat, Abdul Razak and Bee, Soo Tueen and Tee, Tiam Ting and Low, Chong Yu (2012) Measurement and simple equation models of the specific heats of neat and glycerol-plasticized poly(vinyl alcohol). Journal of Vinyl and Additive Technology, 18 (3). pp. 198-203. ISSN 1083-5601

Sirat, Hasnah Mohd and Jamil, Shajarahtunnur and Siew, Lee Wai (2005) The rhizome oil of Kaempferia rotunda Val. Journal of Essential Oil Research, 17 (3). pp. 306-307. ISSN 1041-2905

Siregar, Tirena Bahnur and Saidina Amin, Nor Aishah (2010) Evaporated palm oil cracking to gasoline over zeolite catalysts. Jurnal Teknologi, 52 . pp. 163-179. ISSN 0127-9696 (Print); 2180-3722 (Electronic)

Siregar, Tirena Bahnur and Saidina Amin, Nor Aishah (2006) Catalytic cracking of palm oil to gasoline over pretreated Cu-ZSM-5. Jurnal Teknologi F, 44 (F). pp. 69-82. ISSN 0127-9696

Siti Hajjar Che Man, (2014) Nano-sized graphene oxide as sole surfactant in miniemulsion polymerization for nanocomposite synthesis: effect of pH and ionic strength. POLYMER, 55 (16). pp. 3490-3497. ISSN 0032-3861

Siti Hajjar Che Man, (2013) Synthesis of polystyrene nanoparticles "armoured" with nanodimensional graphene oxide sheets by miniemulsion polymerization. Journal of Polymer Science Part A-Polymer Chemistry, 51 (1). pp. 47-58. ISSN 0887-624X

Siti Hamidah Mohd. Setapar, (2013) Extraction of rubber (hevea brasiliensis) seeds oil using supercritical carbon dioxide. Journal of Biobased Materials and Bioenergy, 7 (2). pp. 213-218. ISSN 1556-6560

Siti Hamidah Mohd. Setapar, (2014) Kinetic study of catechin extracted from Areca catechu seeds using green extraction method. Asia-Pacific Journal of Chemical Engineering, 9 (5). p. 750. ISSN 1932-2135

Siti Hamidah Mohd. Setapar, (2014) A review of mixed reverse Micelle system for antibiotic recovery. Chemical Engineering Communications, 201 (11). pp. 1664-1685. ISSN 1563-5201

Siti Hamidah Mohd. Setapar, (2013) Silage from Malaysia rice straw treated with rice bran, coconut pulp, molasses and effective microorganisms. Journal of Biobased Materials and Bioenergy, 7 (2). pp. 295-299. ISSN 1556-6560

Siti Munirah Sidik, (2012) Modified oil palm leaves adsorbent with enhanced hydrophobicity for crude oil removel. Chemical Engineering Journal, 203 . pp. 1-18. ISSN 1385-8947

Sitti Asmah Hassan, (2014) En route to a sustainable campus-an analysis of university students’ travel patterns via 7 day travel diary. Jurnal Teknologi, 70 (4). pp. 9-16. ISSN 0127-9696

Sitti Asmah Hassan, (2014) A review into traffic signal improvement at pedestrian signalised crossings. Jurnal Teknologi, 70 (4). pp. 27-31. ISSN 0127-9696

Soltani, Ali and Thévenin, Philippe and Bakhtiar, H. and Bath, Armand (2005) Humidity effects on the electrical properties of hexagonal boron nitride thin films. Thin Solid Films, 471 . 277 -286. ISSN 00406090

Song, S. T. and Saman, N. and Johari, K. and Mat, H. B. (2013) Removal of mercury (II) from aqueous solution by using rice residues. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 67-73. ISSN E-ISSN 2180-3722

Songip, A.R. and Nasri, N.S. and Jungan, J. (2004) Characterization Of Bimetallic Pt-Ni/d-A1203 Catalyst For Autothermal Reforming Of Methane. Proceedings of Advances in Malaysian Fuel Cell Research and Development . pp. 120-128.

Songip, A. R. and Nasri, N. S. and Kusworo, T. D. and Ismail, S. R. (2004) Characterization of CoNi-Sn catalyst for autothermal reforming of methane. Proceedings of Advances in Malaysian Fuel Cell Research and Development . pp. 112-119.

Songip, A. R. and Nasri, N. S. and Latiff, M. H. A. (2004) The characterization of Ni- and Co-based catalysts for autothermal reforming process. Proceedings of Advances in Malaysian Fuel Cell Research and Development . pp. 120-128.

Soo, Tueen Bee and Lee, Tin Sin and Ratnam, C. T. and Kavee-Raaz, R. R. D. and Tiam, Ting Tee and David, Hui and Rahmat, Abdul Razak (2015) Electron beam irradiation enhanced of Hibiscus cannabinus fiber strengthen polylactic acid composites. Composites Part B-Engineering, 79 . pp. 35-46. ISSN 1879-1069

Stankova K., (2012) Conformational transitions of proteins engaged in dna double-strand break repair, analysed by tryptophan fluorescence emission and fret. Biochemical Journal, 443 (3). pp. 701-709. ISSN 0264-6021

Sugeng Triwahyono, (2013) Activities of heterogeneous acid-base catalysts for fragrances synthesis: a review. Bulletin of Chemical Reaction Engineering and Catalysis, 8 (1). pp. 14-33. ISSN 1978-2993

Sugeng Triwahyono, (2013) C-5-c-7 linear alkane hydroisomerization over moo3-zro2 and pt/moo3-zro2 catalysts. Journal of Catalysis, 303 . pp. 50-59. ISSN 0021-9517

Sujak, Sehnaz and Lim, Jeng Shiun and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2015) A model for the design of optimal total water network (OTWN). Chemical Engineering Transactions, 45 . pp. 697-702. ISSN 2283-9216

Sulaiman, Yusran and Buang, Nor Aziah and Sanip, Suhaila and Ismail, Ahmad Fauzi Production Of Nano-Carbon Using Arc Discharge In Liquid Nitrogen. Proceedings of Advances in Fuel Cell Research and Development in Malaysia . pp. 195-201.

Sulaimon, Shodiya and Abdul Aziz, Azhar and Nasution, Henry and Darus, Amer Nordin (2015) Empirical correlations for sizing adiabatic capillary tubes using conventional refrigerants and their alternatives. Heat Transfer Research, 46 (5). pp. 483-501. ISSN 2162-6561

Suleiman, Abu Bakar and Muhamad, Nor Asiah (2011) A case for the establishment of Malaysian standard for biodegradable insulation oil in Malaysia transformers. International Review on Modelling and Simulations (I.Re.Mo.S), 4 (6). pp. 2756-2763. ISSN 1974-9821

Sumisha, Anappara and Arthanareeswaran, Gangasalam and Ismail, Ahmad Fauzi and Kumar, Dharani Praveen and Shankar, Muthukonda Venkatakrishnan (2015) Functionalized titanate nanotube-polyetherimide nanocomposite membrane for improved salt rejection under low pressure nanofiltration. RSC Advances, 5 (49). pp. 39464-39473. ISSN 2046-2069

Sunday Olusanya Olantunji, (2011) Predicting correletations properties of crude oil systemes using type-2 fuzzy logic systems. Expert Systems with Applications, 38 . pp. 10911-10922. ISSN 0957-4174

Surya Murali, R. and Yamuna Rani, K. and Sankarshana, Talaturu and Ismail, Ahmad F. and Sridhar, Sundergopal (2015) Separation of binary mixtures of propylene and propane by facilitated transport through silver incorporated poly(ether-block-amide) membranes. Oil and Gas Science and Technology, 70 (2). pp. 381-390. ISSN 1294-4475

Syahirah, (2012) Unsteady pressure fluctuation for internal flow in a cylinder using les model. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 782-788. ISSN 0094-243X

Syahrullail, (2012) Wear characteristic of RBD palm olein using four-ball tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 991-996. ISSN 0094-243X

Syed Annuar Faua'ad Syed Muhammad, (2014) Preliminary study on purification and identification of aromatic acid amino L-DOPA from Malaysia freshwater green mussel byssus. Malaysian Journal of Analytical Sciences, 18 (2). pp. 306-320. ISSN 1394-2506

Syed Anuar Faua'ad Syed Muhammad, (2013) The production of dry powder by the sonocrystallisation for inhalation drug delivery. Powder Technology, 246 . pp. 337-344. ISSN 0032-5910

T.H.T. Abdul Hamid, (2011) Purification and properties of a new dehalogese enzyme from pseudomos sp. b6p grow in 3-chloropropiote (3CP). African Journal of Biotechnology, 10 (4). pp. 610-614. ISSN 1684-5315

Taher, Muhammad and Abdul Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji (2006) A proanthocyanidin from cinnamomum zeylanicum stimulates phosphorylation of insulin receptor in 3t3-l1 adipocytes. Jurnal Teknologi F, 44 (F). pp. 53-68. ISSN 0127-9696

Tahir, Beenish and Tahir, Muhammad and Saidina Amin, NorAishah (2015) Gold-indium modified TiO2 nanocatalysts for photocatalytic CO2 reduction with H-2 as reductant in a monolith photoreactor. Applied Surface Science, 338 . pp. 1-14. ISSN 0169-4332

Tahir, Muhammad and Tahir, Beenish and Saidina Amin, Nor Aishah (2015) Gold-nanoparticle-modified TiO2 nanowires for plasmon-enhanced photocatalytic CO2 reduction with H-2 under visible light irradiation. Applied Surface Science, 356 . pp. 1289-1299. ISSN 0169-4332

Taib, Mohd. Rozainee and Kumoro, Andri Cahyo (2003) Effect of operating parameters on the minimum fluidisation velocity of an inclined fluidised bed. Jurnal Teknologi A (38A). pp. 25-36. ISSN 0127-9696

Taib, Mohd Rozainee and Johari, Anwar and Ngo, S. P. and Salema, A. A. and Tan, K. G. (2009) Utilisation of rice husk waste and its ash (Part 2). The Ingineur, 42 (Pt 2). pp. 37-41. ISSN 0128-4347

Takeshi Matsuura, (2013) Characterization of electrospun polystyrene membrane for treatment of biodiesel's water-washing effluent using atomic force microscopy. Desalination, 329 . pp. 1-8. ISSN 0011-9164

Tan, Jully and Foo, Dominic Chwan Yee and Kumaresan, Sivakumar and Abd. Aziz, Ramlan (2008) Evaluation of pharmaceutical production expansion plan via batch process simulation. Jurutera . ISSN 0126-9909

Tan, K.G. (2008) Combustion characteristics and the quality of rice husk ash at different feeding methods in a fluidized bed combustor. Journal of Chemical and Natural Resources Engineering, 2 (Special Edition). pp. 101-116. ISSN 1823-5255

Tan , Amy Siew Wern and Mohd. Yusof, Khairiyah and Hashim, Shahrir (2008) Kinetic modelling of free-radical vinyl chloride polymerization with a mixture of initiators. Jurnal Teknologi, F (49). pp. 237-249. ISSN 0127-9696

Tang, Jiang Ping and Lam, Hon Loong and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2015) Game theory approach in Malaysia palm biomass industry: analysis. Chemical Engineering Transactions, 45 . pp. 463-468. ISSN 2283-9216

Tasir, Zaidatun and Mohd. Yusof, Khairiyah and Mulop, Normah (2012) A review on enhancing the teaching and learning of thermodynamics. Procedia - Social and Behavioral Sciences, 56 . pp. 703-712. ISSN 1877-0428

Tee, Jia Chee and Buang, Nor Aziah and Aziz, Madzlan and Sanip, Suhaila M. and Ismail, Ahmad Fauzi (2003) Heat treatment studies on activated carbon and charcoal for carbon nanotube synthesis. Proceedings of Advances in Malaysian Fuel Cell Research and Development .

Tee, Jia Chee and Buang, Nor Aziah and Sanip, Suhaila M. and Ismail, Ahmad Fauzi Synthesis of carbon nanotubes (CNTs) using supported catalysts. Proceedings of Advances in Fuel Cell Research and Development in Malaysia .

Tee, Jia Chee and Aziz, Madzlan and Ismail, Ahmad Fauzi (2008) Effect of reaction temperature and flow rate of precursor on formation of multi-walled carbon nanotubes. Jurnal Teknologi, 49F . pp. 141-147. ISSN 0127-9696

Teow, Andrew Ket Seang and Ismail, Issham and Ismail, Abdul Razak and Abdul Rashid, Khairul (2001) The comparison of saraline, sarapar and diesel performances as base oil at high temperature and high pressure. Proceedings of Malaysian Science and Technology Congress '94 .

Thuyavan, Y. Lukka and Anantharaman, Narayanan and Arthanareeswaran, Gangasalam and Ismail, Ahmad Fauzi and Mangalaraja, Ramalinga Viswanathan (2015) Preparation and characterization of TiO2-sulfonated polymer embedded polyetherimide membranes for effective desalination application. Desalination, 365 . pp. 355-364. ISSN 0011-9164

Tiong, Chiong Ing and Azli, Yahya and Abdul Kadir, Mohammed Rafiq and Syahrullail, Samion (2012) Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads. Journal of Zhejiang University: Science A, 13 (8). pp. 633-640. ISSN 1673-565X

Toh, Show Chong and Wan Aizan, Wan Aizan and Chong, Dick Hean (2003) Oxidative resistance of Bimodal HDPE and silane crosslinked bimodal HDPE under exposure to hot chlorinated water. Jurnal Teknologi Siri Khas A (39A). pp. 117-134. ISSN 0127-9696

Tony Hadibarata, (2012) Effect of environmental factors in the decolorization of remazol brilliant blue r by polyporus sp. S133. Journal of the Chilean Chemical Society, 57 (2). ISSN 0717-9324

Tony Hadibarata, (2012) Fate and cometabolic degradation of benzo[a]pyrene by white-rot fungus armillaria sp. F022. Bioresource Technology, 107 . pp. 314-318. ISSN 0960-8524

Triwahyono, Sugeng and Abdul Jalil, Aishah and Musthofa, Malik (2010) Generation of protonic acid sites from pentane on the surfaces of Pt/SO42--ZrO2 and Zn/H-ZSM5 evidenced by IR study of adsorbed pyridine. Applied Catalysis A: General, 372 (1). pp. 90-93. ISSN 0926-860X

Triwahyono, Sugeng and Abdul Jalil, Aishah and Timmiati, Sharifah Najiha and Ruslan, Nurun Najwa and Hattori, Hideshi (2010) Kinetics study of hydrogen adsorption over Pt/MoO3. Applied Catalysis A: General, 372 (1). pp. 103-107. ISSN 0926-860X

Tuan Amran Tuan Abdullah, (2014) Evaluation of an Inconel-625 Reactor and its Wall Effects on Ethanol Reforming in Supercritical Water. Industrial & Engineering Chemistry Research, 53 (6). pp. 2121-2129. ISSN 0888-5885

Tuan Amran Tuan Abdullah, (2014) Hydrogen production from acetic acid steam reforming over bimetallic Ni-Co on La2O3 catalyst- effect of the catalyst dilution. Advances in Applied Mechanics and Materials, 493 . pp. 39-44. ISSN 1660-9336

Ubaidillah, Ubaidillah and Sutrisno, Joko and Purwanto, Agus and Mazlan, Saiful Amri (2015) Recent progress on magnetorheological solids: materials, fabrication, testing, and applications. Advanced Engineering Materials, 17 (5). pp. 563-597. ISSN 1438-1656

Ubhi B.K., (2012) Targeted metabolomics identifies perturbations in amino acid metabolism that sub-classify patients with COPD. Molecular BioSystems, 8 (12). pp. 3125-3133. ISSN 1742-206X

Vel Arjunan, Satya Nanda and Deris, Safaai and Md. Illias, Md. Illias (2001) Literature Survey Of Protein Secondary Structure Prediction. Jurnal Teknologi C (34C). pp. 63-72. ISSN 0127-9696

Venkatesh, Vasisht,C. and Fang, Fengzhou Z. and Zhang, G.X. (2002) Diamond turning of soft semiconductors to obtain nanometric mirror surfaces. International Journal of Advanced Manufacturing Technology, 19 (9). pp. 637-641. ISSN 0268-3768

VilaVandran, (2012) Study of two-dimensional laminar flow in a polar cavity by ansys fluent. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 775-781. ISSN 0094-243X

Voo, Wan Ping and Lee, Boonbeng and Idris, Ani and Islam, Aminul and Tey, Beng Ti and Eng-Seng, Chan (2015) Production of ultra-high concentration calcium alginate beads with prolonged dissolution profile. RSC Advances, 5 (46). pp. 36687-36695. ISSN 2046-2069

W. A. W., Rafizah and Ismail, Ahmad Fauzi (2008) Effect of carbon molecular sieve sizing with poly(vinyl pyrrolidone) K-15 on carbon molecular sieve–polysulfone mixed matrix membrane. Journal of Membrane Science, 307 . pp. 53-61. ISSN 0376-7388

W. J. Lau, (2013) Investigation on the thermal stability of refined palm oil produced from membrane-based refining technique. Journal of Membrane and Separation Technology, 2 (4). pp. 206-212. ISSN 1929-6037

Wahab, Yussof and Othaman, Zulkafli and Hamidinezhad, Habib (2011) Ultra-sharp pointed tip Si nanowires produced by very high frequency plasma enhanced chemical vapor deposition via VLS mechanism. Journal of Materials Science, 46 (15). pp. 5085-5089. ISSN 0022-2461

Wahab, Yussof and Othaman, Zulkafli and Ismail, Abd. Khamim and Hamidinezhad, Habib (2011) Synthesis and analysis of silicon nanowire below Si-Au eutectic temperatures using very high frequency plasma enhanced chemical vapor deposition. Applied Surface Science, 257 (21). pp. 9188-9192. ISSN 0169-4332

Wahid, (2012) Direct thrust force measurement of pulse detonation engine. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1257-1263. ISSN 0094-243X

Wahid, (2012) Reacting shock waves characteristics for biogas compared to other gaseous fuel. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 90-99. ISSN 0094-243X

Wahidin, Suzana and Idris, Ani and Muhamad Shaleh, Sitti Raehanah (2013) The influence of light intensity and photoperiod on the growth and lipid content of microalgae nannochloropsis sp. Bioresource Technology, 129 . pp. 7-11. ISSN 0960-8524

Wahit, Mat Uzir and Hassan, Azman and Rahmat, Abd Razak and Lim, Jian Wei and Ishak, Zam Zarina (2006) Effect of organoclay and ethylene-octene copolymer inclusion on the morphology and mechanical properties of polyamide/polypropylene blends. Journal of Reinforced Plastics and Composites, 25 (9). pp. 933-955.

Wahit, Mat Uzir and Hassan, Azman and Rahmat, Abd Razak and Mohd Ishak, Zarifin Ariffin (2006) Morphological and mechanical properties of rubber-toughened polyamide 6/ polypropylene nanocomposites prepared by different methods of compounding. Journal of Elastomers and Plastics, 38 (3). pp. 231-247.

Wahit, Mat Uzir and Akos, Noel Ibrahim and Laftah, Waham Ashaier (2012) Influence of natural fibers on the mechanical properties and biodegradation of poly(lactic acid) and poly(e-caprolactone) composites: a review. Polymer Composites, 33 (7). pp. 1045-1053. ISSN 0272-8397

Wahit, Mat Uzir and Hassan, Azman and Mohd. Ishak, Zainal Ariffin and Rahmat, Abdul Razak and Othman, Norhayani (2006) The effect of rubber type and rubber functionality on the morphological and mechanical properties of rubber-toughened polyamide 6/polypropylene nanocomposites. Polymer Journal, 38 (8). pp. 767-780. ISSN 0032-3896

Wai, Shin Ho and Hashim, Haslenda and Ab. Muis, Zarina (2012) Integrated biomass power plant and storage for peak load management. Computer Aided Chemical Engineering, 31 . pp. 1000-1004. ISSN 1570-7946

Wan Abdul Rahman, Wan Aizan and Rahmat, Abd Razak and Sin, Lee Tin (2008) Injection moulding simulation analysis of natural fiber composite window frame. Journal of Materials Processing Technology, 197 (1-3). pp. 22-30. ISSN 09240136

Wan Abdul Rahman, Wan Aizan and Chen, Chan Hoong and Ahmad, Fareed (2007) The physical and thermal properties of modified rotational molding grade silane cross-linked polyethylene compound. Jurnal Teknologi , 46 (A). pp. 73-86. ISSN 0127-9696

Wan Abdul Rahman, Wan Aizan and Munthoub, Dayangku Intan (2011) Tensile and water absorption properties of biodegradable composites derived from cassava skin/polyvinyl alcohol with glycerol as plasticizer. Sains Malaysiana, 40 (7). pp. 713-718. ISSN 0126-6039

Wan Abdul Rahman, Wan Aizan and Samad, A. A. and Toh, Wen Yee and Lee, Tin Sin (2011) Properties and interactions of poly(vinyl alcohol)-sago pith waste biocomposites. Journal of Composite Materials, 45 (21). pp. 2199-2209. ISSN 0021-9983

Wan Abdul Rahman, Wan Aizan and Wen Yee, Toh and Tin Sin, Lee (2011) Properties and morphology of poly(vinyl alcohol) blends with sago pith bio-filler as biodegradable composites. Journal of Vinyl and Additive Technology, 17 (3). pp. 184-189. ISSN 1083-5601

Wan Abu Bakar, Wan Azelee and Ali, Rusmidah (2013) Methanation reaction over samarium oxide based catalysts. Malaysian Journal of Fundamental and Applied Sciences, 9 (1). pp. 28-34. ISSN 1823-626X

Wan Abu Bakar, Wan Azelee and Ali, Rusmidah and Abdul Kadir, Abdul Aziz and Wan Mokhtar, Wan Nur Aini (2012) Effect of transition metal oxides catalysts on oxidative desulfurization of model diesel. Fuel Processing Technology, 101 . pp. 78-84. ISSN 0378-3820

Wan Aini Wan Ibrahim, (2013) Separation of selected imidazole enantiomers using dual cyclodextrin system in micellar electrokinetic chromatography. Chirality, 25 (6). pp. 328-335. ISSN 0899-0042

Wan Aini Wan Ibrahim, (2011) Synthesis and chracterization of polydimethylsiloxane-cyanopropyltriethoxysilane-derived hybrid coating for stir bar sorptive extraction. Journal of Sol-Gel Science and Technology, 59 (4). pp. 128-134. ISSN 0928-0707

Wan Aizan, W. A. R. and Roshafima, R. A. and Abdul Ra'uuf, M. S. (2008) Effect of citronella grass fiber addition and method of citronella oil impregnation on rice straw-high density polyethylene composite. Journal of Chemical & Natural Resources Engineering, 2 . pp. 123-133. ISSN 1823-5255

Wan Aizan Abdul Rahman, (2014) Effects of kenaf core on properties of poly( lactic acid) bio- composite. Polymer Composites, 35 (6). pp. 1220-1227. ISSN 1548-0569

Wan Aizan Wan Abdul Rahman, (2011) Comparison of rice husk-filled polyethylene composite and rural wood under weathering effects. Journal of Composite Materials, 45 (13). pp. 1403-1410. ISSN 0021-9983

Wan Aizan Wan Abdul Rahman, (2013) Enhanced interfacial interaction and electronic properties of novel conducting kenaf/polyaniline biofibers. Polymer-Plastics Technology and Engineering, 52 (1). pp. 51-57. ISSN 0360-2559

Wan Aizan Wan Abdul Rahman, (2014) Hybrid composites of short acetylated kenaf bast fiber and conducting polyaniline nanowires in epoxy resin. Journal of Composite Materials, 48 (6). pp. 667-676. ISSN 0021-9983

Wan Aizan Wan Abdul Rahman, (2013) Novel epoxy resin composites containing polyaniline coated short kenaf bast fibers and polyaniline nanowires: mechanical and electrical properties. Journal of Polymer Engineering, 33 (6). pp. 565-577. ISSN 0334-6447

Wan Aizan Wan Abdul Rahman, (2013) Para-hydroxybenzene sulfonic acid as a suitable dopant for the preparation of conductive epoxy/polyaniline nanowires nanocomposites blend: electrical vs mechanical properties. Polymer-Plastics Technology and Engineering, 52 (12). pp. 1266-1270. ISSN 0360-2559

Wan Alwi, S. R. and Manan, Z. A. and Samingin, M. H. (2008) A holistic framework for design of cost-effective minimum water utilization network. Journal of Environmental Management, 88 (2). pp. 219-252.

Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin and Ujang, Zaini (2006) Systematic design of a maximum water recovery network for an urban system based on pinch analysis. The Journal of the Institution of Engineers, Malaysia, 67 (1). pp. 57-64. ISSN 0126-513X

Wan Alwi, Sharifah Rafidah and Tamar Jaya, Muhammad Azan and Abdul Manan, Zainuddin (2009) Cost-effective retrofit of a palm oil refinery using pinch analysis. Jurnal Teknologi (Kejuruteraan) (51F). pp. 29-40. ISSN 0127-9696

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Klemeš, Ji?í Jaromír (2011) Recent advances in resource conservation and planning-a review. Asia-Pacific Journal of Chemical Engineering, 6 (5). pp. 689-695. ISSN 1932-2135

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Misman, M. (2012) A new tool for simultaneous targeting and design of heat exchanger networks. Computer Aided Chemical Engineering, 31 . pp. 1547-1551. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Sun, Kheen Nama (2012) A new method to determine the optimum heat exchanger network approach temperature. Computer Aided Chemical Engineering, 31 . pp. 190-194. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Peng, Yen Liew and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical tool for integrating renewable energy into total sites with variable supply and demand. Computer Aided Chemical Engineering, 30 . pp. 1348-1351. ISSN 1570-7946

Wan Azlina Ahmad, (2013) Spray-dried prodigiosin from serratia marcescens as a colorant. Biosciences Biotechnology Research Asia, 10 (1). pp. 69-76. ISSN 0973-1245

Wan Dagang, Wan Rosmiza Zana and Mohd Yunus, Rosli and Awang Sulong, Dayang Suhailawati and Ripin, Adnan (2004) In-situ Ultrasonic Cleaning of Crossflow Sintered Tube Microfiltration: Effect of Sonication Cycle Time. Annually Seminar NSF 2004 .

Wan Ibrahim, Mohd. Haziman and Putra Jaya, Ramadhansyah and Zainorabidin, Adnan and Abu Bakar, Badorul Hisham and Megat Johari, Megat Alwi (2013) XRD investigation of fired clay brick masonry subjected to aggressive environment. International Journal of Engineering Research and Development, 5 (11). pp. 74-77. ISSN 2278-800X (Print); 2278-067X (Online)

Wan Ibrahim, Wan Aini and Hermawan, Dadan and Sanagi, M. Marsin and Aboul-Enein, Hassan Y. (2009) Cyclodextrin-modified MEKC for enantioseparation of hexaconazole, penconazole, and myclobutanil. Journal of Separation Science, 32 (3). pp. 466-471. ISSN 16159306

Wan Jaafar, Wan Mohammad Kamal and A. Manan, Muhammad and Idris, Ahmad Kamal and Junin, Radzuan (2010) Application of lignin from oil palm empty fruit bunch (EFB) in surfactant formulation. Journal of Materials Science and Engineering, 4 (7). pp. 55-61. ISSN 1934-8959 (Print); 1934-8967 (Electronic)

Wan Md. Zain, Wan Salwanis and Illias, Rosli and Md Salleh, Madihah and Hassan, Osman and Abdul Rahman, Roshanida and Abdul Hamid, Aidil (2007) Production of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. TS1-1: Optimization of carbon and nitrogen concentration in the feed medium using central composite design. Biochemical Engineering Journal, 33 . pp. 26-33. ISSN 1369-703X

Wan Nik, Wan Sani and Ani, Farid Nasir and Hassan, Masjuki (2003) Rheological properties of palm oil and palm-mineral oil blend. Jurnal Mekanikal (16). pp. 107-116. ISSN 0127-3396

Wan Nik, W. B. and Ku Bulat, K. H. and Senin, H. B. and Ali, N. A. and Rahman, M. D. and Ani, F. N. (2007) Study of plant oil and its ageing effect on hydraulic system efficiency and rheological performance. Journal of Applied Sciences, 7 (15). pp. 2120-2125. ISSN 1812-5662

Wan Salleh, Wan Norharyati and Ismail, Ahmad Fauzi (2012) Fabrication and characterization of Pei/Pvp-based carbon hollow fiber membranes for Co2/Ch4 and Co2/N2 separation. Aiche Journal, 58 (10). pp. 3167-3175. ISSN 0001-1541

Wan Sulaiman, (2012) Pyrolysis of eucalyptus wood in a fluidized-bed reactor. Research On Chemical Intermediates . pp. 1-15. ISSN 0922-6168

Wan Sulaiman, Wan Rosli and Euy, Soo Lee (2012) Simulation of surfactant based enhanced oil recovery. Open Petroleum Engineering Journal, 5 (1). pp. 78-87. ISSN 1874-8341

Wan Sulaiman, Wan Rosli and Sang, Kwon Park and Euy, Soo Lee (2012) Potential of Polysorbate20 surfactant for enhanced oil recovery. Open Petroleum Engineering Journal, 5 (1). pp. 63-68. ISSN 1874-8341

Weigl, J. D. and Inayati, I. and Saidi, Hamdani (2011) Development of hydrogen fuel cell motorcycle in South East Asia. ECS Transactions, 30 (1). pp. 289-293. ISSN 1938-6737

Weigl, Joerg and Saidi, Hamdani (2005) Pios hydrogen fuel cell tricycle. International Journal of Hydrogen Energy Volume, 30 . pp. 1035-1036. ISSN 03603199

Wibawa P.J., (2011) Changes in physical properties and molecular structure of polystyrene nanospheres exposed with solar flux. AIP Conference Proceedings, 1341 . pp. 54-61. ISSN 0094-243X

Wong, K. C. and Goh, Pei Sean and Ismail, Ahmad Fauzi (2015) Gas separation performance of thin film nanocomposite membranes incorporated with polymethyl methacrylate grafted multi-walled carbon nanotubes. International Biodeterioration and Biodegradation, 102 . pp. 339-345. ISSN 0964-8305

Wong, Syieluing and Ngadi, Norzita and Amin, Nor Aishah Saidina and Tuan Abdullah, Tuan Amran (2016) Pyrolysis of low density polyethylene waste in subcritical water optimized by response surface methodology. Environmental Technology (United Kingdom), 37 (2). pp. 245-254. ISSN 0959-3330

Wong, Syieluing and Ngadi, Norzita and Tuan Abdullah, Tuan Amran and Inuwa, I. (2015) Recent advances of feed-in tariff in Malaysia. Renewable and Sustainable Energy Reviews, 41 . pp. 42-52. ISSN 1364-0321

Wong, T. E. and Md. Illias, Rosli and Md. Salleh, Madihah and Hassan, Osman and Rahman, R. A. and Ismail, A. F. (2005) Initial screening of fermentation variables for the production of novel Cyclomaltodextrin glucanotransferase (CGTase) from local isolated Bacillus stearothermophilus HR1. Developments in Chemical Engineering and Mineral Processing, 13 (5-6). pp. 541-547. ISSN 1932-2143 (electronic)

Wong W.-Y., (2011) Characterization of a labrys sp. strain wy1 able to utilize 2,2-dichloropropiote (2,2-DCP) as sole source of carbon. African Journal of Microbiology Research, 5 (20). pp. 3282-3288. ISSN 1996-0808

Xu, Jingjing and Cheng, Kian-Kai and Yang, Zongbao and Wang, Chao and Shen, Guiping and Wang, Yadong and Liu, Qiong and Dong, Jiyang (2015) H-1 NMR metabolic profiling of biofluids from rats with gastric mucosal lesion and electroacupuncture treatment. Evidence-based Complementary and Alternative Medicine, 2015 . ISSN 1741-427X

Xu, Jingjing and Jiang, Huaizhou and Li, Jinquan and Cheng, Kian-Kai and Dong, Jiyang and Chen, Zhong (2015) H-1 NMR-based metabolomics investigation of copper-laden rat: a model of Wilson's disease. Plos One, 10 (4). ISSN 1932-6203

Yaacob, N. (2006) Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for CO2/CH4 gas separation system. Journal of Membrane Science, 275 (1-2). pp. 151-165. ISSN 0376-7388

Yaakob, Harisun and Ahmed, Nor Rashidah and Daud, Siti Khairunnisa and Abdul Malek, Roslinda and Abdul Rahman, Roshanida (2012) Optimization of ingredient and processing levels for the production of coconut yogurt using response surface methodology. Food Science and Biotechnology, 21 (4). pp. 933-940. ISSN 1226-7708(Print); 2092-6456(Electronic)

Yahaya, Abdul Hamid and Mahmoud Nasef, Mohamed and El-Hefian, Esam A. (2011) Preparation and characterization of chitosan/poly(vinyl alcohol) blended films: Mechanical, thermal and surface investigations. E-Journal of Chemistry, 8 (1). pp. 91-96. ISSN 0973-4945

Yahaya, S. R. and Hassim, Mimi Haryani (2015) Radiation risk estimation from occupational medical imaging exposure in Malaysia. Jurnal Teknologi, 75 (6). pp. 87-94. ISSN 0127-9696

Yahya, Syaiful Nizam and Mohd. Suaib, Norhaida and Bade, Abdullah and Shamsuddin, Siti Mariyam (2006) Solid deformation modeling techniques. Asian Journal of Information Technology, 5 (3). pp. 324-338. ISSN 1682-3915

Ya’aini, Nazlina and Saidina Amin, Nor Aishah and Mohammed Yussuf, Mohd Asmadi (2012) Optimization of levulinic acid from lignocellulosic biomass using a new hybrid catalyst. Bioresource Technology, 116 . pp. 58-65. ISSN 0960-8524

Yeap, Beng Hi and Mustafa, Azeman and Yaacob, Zulkefli (2001) Computational investigation of air-fuel mixing system for natural gas powered motorcycle. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . (Unpublished)

Yeng, Lee Chiau and Wahit, Mat Uzir and Othman, Norhayani (2015) Thermal and flexural properties of regenerated cellulose(RC)/poly(3- hydroxybutyrate)(PHB)biocomposites. Jurnal Teknologi, 75 (11). pp. 107-112. ISSN 0127-9696

Yousefi, Amin Termeh and Bagheri, Samira and Shinji, Kawasaki and Mahmood, Mohamad Rusop and Ikeda, Shoichiro (2015) Highly oriented vertically aligned carbon nanotubes via chemical vapour deposition for key potential application in CNT ropes. Materials Research Innovations, 19 (3). pp. 212-216. ISSN 1432-8917

Yunan, M. H. and Yee, H. V. and Lee, H. L. and Ismail, A. F. (2008) Separation of water-oil emulsion by using membrane. Journal of Chemical & Natural Resources Engineering, 2 . pp. 139-145. ISSN 1823-5255

Yunan, Mat Hussin and Derahman, Mohd. Nawi (1992) Meningkatkan perolehan minyak dengan kaedah banjiran air berpolimer. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 207-214.

Yussuf, A. A. (2007) Sealing of polymeric-microfluidic devices by using high frequency electromagnetic field and screen printing technique. Journal of Materials Processing Technology, 189 (1-3). pp. 401-408. ISSN 0924-0136

Yusuf, Rafiu Olasunkanmi and Noor, Zainura Zainon and Abu Hassan, Mohd. Ariffin (2015) Historical and projected methane emission determination in Malaysia (1980-2020). Sustainable Environment Research, 21 (1). pp. 37-45. ISSN 1022-7636

Yuzir, (2012) Impact of the herbicide (RS)-MCPP on an anaerobic membrane bioreactor performance under different COD/nitrate ratios. Bioresource Technology, 109 . pp. 31-37. ISSN 0960-8524

Z. Shukur, (2011) Upgrading of pyrolysis oil into diesel-like fuel oil: comparison between in-situ and ex-situ test rig. Jurnal Teknologi, 56 . pp. 101-113. ISSN 0127–9696

Zahedi, G. and Elkamel, A. and Lohi, A. (2010) Genetic algorithm optimization of supercritical fluid extraction of nimbin from neem seeds. Journal of Food Engineering, 97 (2). pp. 127-134. ISSN 02608774

Zahedi, Gholamreza and Bazmi, Aqeel Ahmed (2011) Sustainable energy systems: role of optimization modeling techniques in power generation and supply-A review. Renewable and Sustainable Energy Reviews, 15 (8). pp. 3480-3500. ISSN 1364-0321

Zahedi, Gholamreza and Mohd. Yusof, Khairiyah and Sabaa, S. and al-Otaibi, Musleh (2011) Troubleshooting of crude oil desalination plant using fuzzy expert system. Desalination, 266 (1-3). pp. 162-170. ISSN 0011-9164

Zaidi, S. M. Javaid and Fadhillah, Farid and Khan, Zafar and Ismail, Ahmad F. (2015) Salt and water transport in reverse osmosis thin film composite seawater desalination membranes. Desalination, 368 . pp. 202-213. ISSN 0011-9164

Zainal Alam, Muhd. Nazrul Hisham and Razali, Firdausi (2006) The significance of hydrodynamics difference between rushton turbine and marine impeller on the KLA in 16-litre bioreactor. Journal Of Industrial Technology, 15 (1). pp. 23-34. ISSN 0882-6404

Zainal Alam, Muhd. Nazrul Hisham and Amiri Moghadam, Amir Ali and Kouzani, Abbas (2015) Establishment of temperature control scheme for microbioreactor operation using integrated microheater. Microsystem Technologies, 21 (1). pp. 415-428. ISSN 0946-7076

Zainal Salam, (2014) Optimization and characterization of biodiesel production from microalgae Botryococcus grown at semi-continuous system. Energy Conversion and Management, 88 . pp. 936-946. ISSN 0196-8904

Zainal Salam, (2014) A study on large scale cultivation of Microcystis aeruginosa under open raceway pond at semi-continuous mode for biodiesel production. Bioresource Technology, 172 . pp. 186-193. ISSN 0960-8524

Zaini, (2013) Sludge-adsorbents from palm oil mill effluent for methylene blue removal. Journal of Environmental Chemical Engineering, 1 (4). pp. 1091-1098. ISSN 2213-3437

Zainol, N. A. and Voo, S. C. and M. R., Sarmidi and R. A., Aziz (2008) Profiling of Centella asiatica (L.) urban extract. The Malaysian Journal of Analytical Sciences, 12 (2). pp. 322-327. ISSN 1394-2506

Zainuddin Abd. Manan, (2014) Generic carbon cascade analysis technique for carbon emission Management. Applied Thermal Engineering, 70 (2). pp. 1141-1147. ISSN 1359-4311

Zainuddin Abd. Manan, (2014) A simple modelling approach for prediction of standard state real gas entropy of pure materials. SAR and QSAR in Environmental Research, 25 (9). pp. 695-710. ISSN 1062-936X

Zainuddin Abdul Manan, (2013) Molecular modeling of the ideal gas enthalpy of formation of hydrocarbons. Fluid Phase Equilibria, 360 . pp. 423-434. ISSN 0378-3812

Zainudin, Zaki and Mohamed, Maketab and Ramli, Mohd. Rosslim (2010) Effects of induced salinity on BOD5 reaction kinetics of river water samples. The Malaysian Journal of Analytical Sciences, 14 (1). pp. 24-31. ISSN 1394-2506

Zainul Akmar Zakaria, (2014) Current perspective on bacterial pigments: emerging sustainable compounds with coloring and biological properties for the industry - an incisive evaluation. RSC Advances, 4 (74). pp. 39523-39529. ISSN 2046-2069

Zainura Zainon Noor, (2013) Bio-fouling reducers for improving the performance of an aerobic submerged membrane bioreactor treating palm oil mill effluent. Desalination, 316 . pp. 146-153. ISSN 0011-9164

Zainura Zainon Noor, (2014) Energy production from natural gas: evaluation of potential environmental impacts using life cycle assessment approach. Advanced Materials Research, 864-86 . pp. 1132-1138. ISSN 1022-6680

Zainura Zainon Noor, (2013) Membrane bioreactor: applications and limitations in treating high strength industrial wastewater. Chemical Engineering Journal, 225 . pp. 109-119. ISSN 1385-8947

Zakaria, Zainoha and Linnekoski, J. and Saidina Amin, Nor Aishah (2012) Catalyst screening for conversion of glycerol to light olefins. Chemical Engineering Journal, 207-08 . pp. 803-813. ISSN 1385-8947

Zakaria, Zainul Akmar and Md. Salleh, Madihah (2011) The effect of partial replacement of dietary fishmeal with fermented prawn waste liquor on juvenile sea bass growth. Journal of Applied Aquaculture, 23 (1). pp. 51-57. ISSN 1045-4438

Zakaria Z., (2012) Effect of degree of deacetylation of chitosan on thermal stability and compatibility of chitosan-polyamide blend. BioResources, 7 (4). pp. 5568-5580. ISSN 1930-2126

Zakaria, Zainal and Abd. Rahman, Mohd. Norani and Abd. Kadir, Abdul Aziz (1994) Penganalisisan baki gas petroleum cecair dalam selinder mudahalih. Buletin FKKKSA, 8(2) . pp. 10-14. ISSN 0128-0740

Zaki, Nazar M. and Deris, Safaai and Illias, Rosli Md (2005) Application of string kernels in protein sequence classification. Applied Bioinformatics, 4 . pp. 45-52. ISSN 11755636

Zaki Yamani Zakaria, (2014) Optimization of catalytic glycerol steam reforming to light olefins using Cu/ZSM-5 catalyst. Energy Conversion and Management, 86 . pp. 735-744. ISSN 0196-8904

Zarina Abu Muis, (2014) Grid-connected distributed energy generation system planning and scheduling. Desalination and Water Treatment, 52 (6). pp. 1202-1213. ISSN 1944-3994

Zolfagharian A., (2011) Particle swarm optimization approach on flexible structure at wiper blade system. World Academy of Science, Engineering and Technology, 78 . pp. 97-102. ISSN 2010-376X

Zubir, Nor Aida and Ismail, Ahmad Fauzi (2002) Effect of Sintering Temperature on the Morphology and Mechanical Properties of PTFE Membranes as a Base Substrate for Proton Exchange Membrane. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 823-831. ISSN 0125-3395

Zularisam, A. W. and Ismail, A. F. and Salim, Razman (2006) Behaviours of natural organic matter in membrane filtration for surface water treatment : a review. Desalination, 194 (1-3). pp. 211-231.

Zularisam, A. W. and Ismail, Ahmad Fauzi and Salim, Mohd Razman (2007) Ultrafiltration on natural organic matter (NOM): Effect of NOM characteristics on membrane rejection mechanisms in drinking water process. Malaysian Journal of Science, 26 (1). pp. 97-107.

Zularisam, A. W. and Ismail, Ahmad Fauzi and Salim, Mohd. Razman and Sakinah, Mimi and Matsuura, T. (2009) Application of coagulation-ultrafiltration hybrid process for drinking water treatment: Optimization of operating conditions using experimental design. Separation and Purification Technology, 65 (2). pp. 193-210. ISSN 1383-5866

Zulkifli, Abdul Majid and Zulkefli, Yaacob and Mohd. Adnan, Yahya (2002) A Comparison Study On Engine Oil Properties For Bi-Fuel Motorcycle. 2nd World Engineering Congress .

Zurina Mohamad, (2014) Effect of sepiolite content on mechanical and flammability properties of ethylene vinyl acetate nanocomposite. Advanced Materials Research, 970 . pp. 259-262. ISSN 1022-6680

Zurina Mohamad, (2014) Electron beam crosslinking of EVA/ENR-50/HNTS nanocomposites in the presence of Trimethylol propane triacrylate, TMPTA. Advanced Materials Research, 970 . pp. 84-87. ISSN 1022-6680

Zurina Mohamad, (2014) Mechanical properties of polyamide 6 (pa6)/ethylene vinyl acetate (eva)/sepiolite composite. Applied Mechanics and Materials, 554 . pp. 62-65. ISSN 1660-9336

Zurina Mohamad, (2014) Mechanical, thermal and flammability properties of ethylene-vinyl acetate (EVA)/sepiolite nanocomposites. Polymer Testing, 37 (1). pp. 117-122. ISSN 0142-9418

Book Section

A. Manan, Muhammad and Othman, Ariff and Ismail, Issham and Ikhsan, Azman (1997) Petroleum fluid components that naturally formed. In: Properties of petroleum fluid. Penerbit UTM, Skudai, Johor Bahru, Malaysia. ISBN 983-52-0081-5

A. Rahaman, , M. S. and Ismail, , A. F. and Ng, B. C. and Mustafa, A. and Hasbull, H. (2008) Modification of pan homopolymer for the precursor of carbon fiber. In: Development in Polymer-based Carbon Fiber Research in Malaysia. Penerbit UTM , Johor, pp. 153-164. ISBN 978-983-52-0605-4

Abdul Majid, Fadzilah Adibah and Idrus, Ruzymah and Ting, Lee Yu (2008) Suitable culture conditions for growth of primary human skin fibroblast. In: Special topics in bioprocess engineering. Penerbit UTM, Johor, pp. 69-102. ISBN 978-983-52-0602-5

Abdul Manan, Zainuddin (2008) Process design for waste minimization. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 1-33. ISBN 978-983-52-05965-5

Abu Bakar, Aznizam and Che Ishak, Mohd. Hazuwan (2008) Mechanical and thermal properties of benzoylated oil palm empty fruit bunch short fibre reinforced acrylic-impact modified poly (vinyl chloride) composites. In: Advanced in Polymer Technology II. Penerbit UTM , Johor, pp. 1-26. ISBN 978-983-52-0604-7

Abu Bakar, Aznizam and Jamaludin, Shafinaz (2008) Mechanical and thermal properties of oil palm empty fruit bunch / montmorillonite fillers reinforced poly (vinyl chloride) hybrid composites. In: Advanced in Polymer Technology II. Penerbit UTM , Johor, pp. 86-106. ISBN 978-983-52-0604-7

Akhondzadeh, H. and Fattahi, A. and Zare, A. R. and Derahman, Mohd. Nawi and Idriss, A. K. (2012) Promising approaches to enhance SAGD performance in uneconomical tar-sands. In: Society of Petroleum Engineers - North Africa Technical Conference and Exhibition 2012, NATC 2012: Managing Hydrocarbon Resources in a Changing Environment. Society of Petroleum Engineers, Texas, pp. 1104-1111. ISBN 978-162276050-3

Aminurrashid Noordin, (2011) Review blood pressure meter system. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 219-239. ISBN 978-967-354-181-2

B.Lee, L. and Mat, Hanapi (2007) Biodegradation of oily wastes-a review on used lubricants. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 219-268. ISBN 978-983-52-05972-2

Basri, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan and Rusop, Mohamad and Soga, Tetsuo (2009) Effect of different incorporation route on the properties of polyethersulfone-silver membrane. In: AIP Conference Proceedings. American Institute of Physics., USA, pp. 93-97. ISBN 978-073540673-5

C. Y., Mohd Azizi and N. A., Nik Norulaini and B. S., Wahyu and A. K. , Mohd Omar (2007) Extraction and separation of djenkolic acid from pithecellobium jiringan seeds using supercritical carbon dioxide extraction. In: Advances in Separation Processes. Penerbit UTM , Johor, pp. 172-192. ISBN 978-983-52-05958-8

Chong, K. C. and Lai, S. O. and Lau, Woei Jye and Lee, K. M. and Ooi, B. S. (2012) A study of computational fluid dynamics on membrane module in membrane distillation. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 174-178. ISBN 978-146730655-3

Derahman, Mohd. Nawi and Leong Hooi, Tan (2007) Breaking of paradigm: gas-oil-contact (GOC) water injection. In: Improved Oil Recovery. Penerbit UTM , Johor. ISBN 978-983-52-0594-1

Fattahi, A. and Akhondzadeh, H. and Zare, A. R. and Derahman, Mohd. Nawi and Yunan, Mat Hussin (2012) Influence of lateral variation of permeability on steam assisted gravity drainage. In: Society Of Petroleum Engineers - Spe Heavy Oil Conference Canada 2012. Society of Petroleum Engineers, Canada, pp. 37-44. ISBN 978-162276111-1

Fattahi, A. and Zare, A. R. and Akhondzadeh, H. and Derahman, Mohd. Nawi and Yunan, Mat Hussin (2012) Optimization of SAGD in conductive fractured reservoir. In: Society of Petroleum Engineers - North Africa Technical Conference and Exhibition 2012, NATC 2012: Managing Hydrocarbon Resources in a Changing Environment. Society of Petroleum Engineers, Texas, pp. 1327-1335. ISBN 978-162276050-3

Hakim Ismail, Lokman and Mohammad, Norazlina and Ahmad, Nazrun and Lee, Phe Ling and Ima-Nirwana, Ima-Nirwana (2008) Effects of vitamin E supplementation on bone metabolism in nicotine treated rats. In: Clinical Engineering and Its Application. Penerbit UTM , Johor, pp. 81-97. ISBN 978-983-52-0558-3

Haron, Saharudin (2008) Enzyme sensors for water pollution monitoring. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 148-169. ISBN 978-983-52-05965-10

Hashim, Haslenda (2008) Carbon capture and sequestration. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 63-78. ISBN 978-983-52-05965-7

Head, Dept. of Petroleum Engineering (2008) Program specifications for bachelor in engineering (petroleum). In: Faculty of Chemical & Natural Resources Engineering: Guide Book (Undergraduate 2008/09). Faculty of Chemical & Natural Resources Engineering, pp. 108-123.

H’ng, Wei Cha and El-Qarni, Muhammad and Shabuddin, Yaakop and Md. Illias, Rosli and Nik Mahmood, Nik Azmi (2008) Microbial Fuel Cell (MFC): preliminary study on electricity generation using baker’s yeast. In: Special topics in bioprocess engineering. Penerbit Universiti Teknologi Malaysia, pp. 127-138. ISBN 978-983-52-0603-0

Ismail, A. F. and Mustafa, A. and Abdullah, M. S. and A. Rahaman, M. S. and Hasbullah, H. and Ng, B. C. (2008) Effects of polymer composition and coagulation bath temperature on the fabrication and characteristics of carbon fiber precursor in solvent-free coagulation process. In: Development in Polymer-based Carbon Fiber Research in Malaysia. Penerbit UTM , Johor, pp. 111-136. ISBN 978-983-52-0605-4

Ismail, Ahmad Fauzi and Dzarfan Othman, Mohd. Hafiz (2008) Modification OF SPEEK WITH Boron Orthophosphate. In: Sulfonated Poly(ether ether ketone) : Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, 53 - 70. ISBN n/a

Ismail, Ahmad Fauzi and Othman, Nurhidayati (2008) Composite SPEEK WITH Siwa, Sio2 And Alo2 : novel materials for polymer electrolyte membrane. In: Sulfonated Poly(ether ether ketone) : Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, pp. 71-86. ISBN n/a

Ismail, Ahmad Fauzi and Rahman, W. R. and Aziz, F. (2009) Development of polysulfone (PSF)-carbon molecular sieve (CMS) mixed matrix membrane (MMM) for O(2)/N(2) gas separation. In: Nanoscience and Nanotechnology. AIP Conference Proceedings, 1136 . Amer Inst Physics, New York, pp. 201-206. ISBN 978-0-7354-0673-5

Kolyaei, M. and Zahedi, Gholamreza and Nasef, M. M. Optimization of biodiesel production from waste cooking oil using ion exchange resins. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO). IEEE XPLORE, 001-005. ISBN 978-145770005-7

Lim Kian Sheng, (2011) An analysis of diversity for vector evaluated particle swarm optimization based on ZDT test problems. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 203-214. ISBN 978-967-354-183-6

Mat, Ramli and Saidina Amin, Nor Aishah (2007) Conversion of methane to useful chemical and fuels. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 18-40. ISBN 978-983-52-05972-2

Mat, Ramli and Tian Fuw, Lau (2007) Production of biodiesel using heterogeneous catalyst. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 1-17. ISBN 978-983-52-05972-2

Md. Illias, , Rosli and Goh, Kian Mau and Mahadi, Nor Muhammad and Ismail, Ahmad Fauzi and Hassan, Osman (2008) From gene to process : CGtase as a role model. In: Special Topics in Bioprocess Engineering. Penerbit UTM , Johor, pp. 35-68. ISBN 978-983-52-0602-4

Md. Yassin, Abu Azam and Md. Ali, Nasly and Merdhah, Amer Badr (2008) Solubility of scale formation in oil reservoir during water injection. In: Recent Advances: Scale Formation in Oil Reservoir During Water Injection. Penerbit UTM, Johor, pp. 24-35. ISBN 978-983-52-0594-6

Md. Yassin,, Abu Azam and Md. Ali, Nasly and Merdhah, Amer Badr (2008) Formation damage due to scale formation in porous media resulting from water injection. In: Recent Advances: Scale Formation in Oil Reservoir During Water Injection. Penerbit UTM , Johor, pp. 9-23. ISBN 978-983-52-0594-6

Mohd Arshad, Azmi and Kamaluddin, Noor Hazirah (2007) Carbon dioxide flooding in offshore Sarawak. In: Improved Oil Recovery. Penerbit UTM , Johor, pp. 61-78. ISBN 978-983-52-0594-1

Mohd. Norddin, Muhd. Noorul Anam and Ismail, Ahmad Fauzi (2008) Blending speek with charge surface modifying macromolecule : a new technique to enhance polymer electrolyte performance. In: Sulfonated Poly(ether ether ketone): Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, 87 - 104. ISBN n/a

Mohd. Norddin, Muhd. Noorul Anam and Jaafar, Juhana and Ismail, Ahmad Fauzi (2008) CSMM blended speek membrane : effect on polyols. In: Sulfonated Poly(ether ether ketone) : Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, pp. 105-122. ISBN n/a

Mohd. Yusof, Abdul Halim (2008) Porous polypropylene membranes with grafted cation-exchange polymer layers for protein separation. In: Special Topics In Bioprocess Engineering. Penerbit UTM , Johor, 163 - 180. ISBN 978-983-52-0602-9

Mohd. Yusof, Khairiyah and Idris, Ani and Morad, Noor Azian (2008) Modelling of steady state chemical engineering systems using artificial neural network time. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, 123- 147. ISBN 978-983-52-05965-10

Mohd. Yusof, Khairiyah and Tan Amy, Siew Wern (2008) Optimal control of chemical processes. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 93-122. ISBN 978-983-52-05965-9

Muhamad, Ida Idayu and Samat, Noraini and Md. Ismail, Norhairani (2008) Solid state fermentation for production of specific enzymes. In: Special Topics In Bioprocess Engineering Volume III. Penerbit UTM, Johor, 103 - 126. ISBN 978-983-52-0602-6

Nasri, Noor Shawal and Ahmed M., Murtala and Abdul K., Adilah and Hamza D., Usman (2012) Identification of functional groups of sustainable bio-oil substrate and its potential for specialty chemicals source. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1179-1185. ISBN 978-303785457-0

Nasri, Noor Shawal and Usman, Hamza D. and Adilah, Abdul K. and Murtala, Ahmed M. (2012) Featuring functional component groups of sustainable solid waste material on carbon dioxide capture. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 2065-2071. ISBN 978-303785455-6

Nik Ab. Rahman, Nik Hetty Eliya and Hashim, Shahrir (2008) Preparation of PMMA/MMT nanocomposites through in situ emulsion polymerization. In: Advanced in Polymer Technology II. Penerbit UTM , Johor, pp. 47-65. ISBN 978-983-52-0604-7

Othman, Norhayani and Jazrawi, B. and Mehrkhodavandi, P. and Hatzikiriakos, S. G. (2012) Rheology and melt fracture of poly(lactides). In: Annual Technical Conference - ANTEC, Conference Proceedings. Society of Plastics Engineers (SPE), Newtown, USA, pp. 1170-1174. ISBN 978-162276083-1

Othman, Nurhidayati and Jaafar, Juhana and Mohd. Norddin, Muhd. Noorul Anam (2008) Sulfonation of peek: a technique to enhanced polymer elctrolyte membrane perfomance. In: Sulfonated Poly(ether ether ketone): Material for Polymer Electrolyte Membrane. Penerbit UTM, Johor, 15 - 30.

Othman, Nurhidayati and Mohd. Norddin Anam, Muhd. Noorul and Fauz, Ahmad (2008) Sulfonated poly(ether ether ketone) as polymer electrolyte membrane. In: Sulfonated Poly(ether ether ketone): Material for Polymer Electrolyte Membrane. Penerbit UTM, Johor, 1 - 14.

Rahaman, M. S. A. and B. C., Ng and Hasbull, H. and Ismail, A. F. and Mustafa, A. (2008) Stabilization process and its relationship on mechanical properties of modified pan fiber. In: Development in Polymer-based Carbon Fiber Research in Malaysia. Penerbit UTM, Johor, pp. 137-152. ISBN 978-983-52-0605-4

Rahmat, Abdul Razak (2009) Rice husk reinforced thermoplastic composites. In: Research on Natural Fibre Reinforced Polymer Composite. Universiti Putra Malaysia Press, Serdang, Selangor, pp. 183-197. ISBN 978-967-344-002-3

Rahmat, Abdul Razak and Abd. Samat, Suriani and Mok, Munirah and Hassan, Azman (2008) Mechanical properties and morphology of short pineapple leaf fibre reinforced polypropylene composite. In: Advanced in Polymer Technology II. Penerbit UTM , Johor, pp. 27-46. ISBN 978-983-52-0604-7

Rahmat, Abdul Razak and Rathanak, Priya (2006) Blown film extrusion of Coconut Shell Powder (CSP) filled Low Density Polyethylene (LDPE) film. In: Advanced In Polymer Technology I. Penerbit UTM, Johor , 39 - 58. ISBN 978-983-52-0603-0

Saidina Amin, Nor Aishah and Misson, Mailin and Wan Omar, Wan Nor Nadyaini and Misi, Siti Eda Eliana and Haron, Roslindawati and Ahmad Kamaruddin, Mohd Fadhzir (2007) Biofuel from oil palm and palm oil residues. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 41-66. ISBN 978-983-52-05972-2

Samsuri, Ariffin Sifat-sifat Bendalir Reserbor. In: UNSPECIFIED UNSPECIFIED.

Samsuri, Ariffin Unsur Geologi Petroleum. In: Unsur Geologi Petroleum. Universiti Teknologi Malaysia.

Samsuri, Ariffin and Idris, Ahmad Kamal and Md. Nasir, Sanat and Sulaiman, Nik Meriam and Hj.Mohd Salleh, Ahmad Nordeen and Hj. Abdul Manan, Mahbob (1995) Glosari Industri Petroleum. In: Glosari Industri Petroleum. Dewan Bahasa dan Pustaka, Kementerian Pendidikan Malaysia, Kuala Lumpur.

Samsuri, Ariffin and Idris, Ahmad Kamal and Sulaiman, Nik Meriam and Hj. Mohd Salleh, Ahmad Nordeen and Hj. Abdul Manan, Mahbob (1999) Glosari Industri Petroleum - Edisi Kedua. In: Glosari Industri Petroleum - Edisi Kedua. Dewan Bahasa dan Pustaka, Kuala Lumpur.

Samsuri, Ariffin and Ismail, Issham Asas Petroleum. In: Asas Petroleum. Universiti Teknologi Malaysia.

Sulaiman, S. and Yunus, R. and M., N. A. Ibrahim (2008) Carbon fiber reinforced carbon for brake pad application. In: Development in Polymer-based Carbon Fiber Research in Malaysia. Penerbit UTM , Johor, pp. 45-56. ISBN 978-983-52-0605-4

Tan, Y. L. and Abdul Manan, Zainuddin and Foo, D. C. Y. (2007) Retrofit of water network with regeneration using water pinch analysis. In: Process Safety and Environmental Protection. Elsevier B.V., pp. 305-317.

Wahit, Mat Uzir and Mahmoudian, Shaya and Yussuf, A. A. and Nematzadeh , Navid (2011) Preparation and thermal properties of cellulose/layered silicate montmorillonite nanocomposites prepared via ionic liquids. In: Key Engineering Materials. Elsevier, Kuala Lumpur, pp. 786-791. ISBN 978-303785059-6

Wan Abdul Rahman, Wan Aizan and Adnan, Nurnadia and Rasit Ali, Roshafima and Sulaiman, Hanizam (2008) Characterization of injection molded high density polyethylene/rice straw biocomposite. In: Advanced in Polymer Technology II. Penerbit UTM , Johor, pp. 66-85. ISBN 978-983-52-0604-7

Wan Abdul Rahman, Wan Aizan and Rasit Ali, Roshafima and Nizam, Mohd. Shahrul (2006) Chemical modification and characterization of tapioca starch with acetic anhydride. In: Advanced In Polymer Technology I. Penerbit UTM, Johor , 87 - 104. ISBN 978-983-52-0603-0

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2008) Systematic process systems cost screening technique. In: Advances in Process Systems Engineering. Penerbit UTM, Johor, pp. 79-92. ISBN 978-983-52-05965-8

Yunan, Mat Hussin and Mohd Ali, Haneff (2007) A laboratory study of acid formulation to remove filter cake in Wells. In: Improved Oil Recovery. Penerbit UTM , Johor, pp. 79-100. ISBN 978-983-52-0594-1

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2012) Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir. In: Society of Petroleum Engineers - Spe Oil and Gas India Conference and Exhibition 2012, Ogic - Further, Deeper, Tougher: The Quest Continues... Society of Petroleum Engineers, Richardson, Texas, pp. 148-172. ISBN 978-1-61399-192-3

Zulkarnay Zakaria, (2011) Oil and gas pipe diagnosis system using magnetic flux leakage technology. In: Progress in Process Tomography & Instrumentation System: Series 3/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 155-171. ISBN 978-967-354-180-5

Monograph

Abd Hamid, Mohd Kamaruddin (2007) HYSYS: an introduction to chemical engineering simulation for UTM Degree++ program. Manual. Universiti Teknologi Malaysia. (Unpublished)

Abd. Aziz, Azila and Abd. Rahman, Badarulhisam and Idris, Ani (2006) The Development and oprimization of process for the expression of sialylated recombinant human therapeutic glycoprotein in insect cell-baculovirus system. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Abd. Aziz, Mustafa Kamal and Morad, Noor Azian and Mohd Yunus, Sabariah and Abd. Razak, Abdul Syukor (2003) The study of heat penetration in palm oil fruitlets by developing a new technique for measuring oil content in fruiltlets during sterilization process. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Abd. Rahman, Roshanida (2006) Synthesis of 2-O-a-D-glucopyranosyl L-ascorbic acid by cyclomaltodextrin glucanotransferase from bacillus sp. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Abdul Aziz, Azila and Mat Daud, M. Nazri and Kassim, M. Hafiz (2005) Development of biosensor technology for detecting specific contaminants in environment and agriculture. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Abdul Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji and Ramli, Mohd. Khairul Anuar (2005) Basic in vitro studies of human skin culture: melastoma malabathricum extract on fibroblasts growth. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abu Hassan , Mohd Ariffin (2008) Wet Air Oxidation (WAO) treament of wastewater from textile industries. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Abu Hassan , Mohd Ariffin and Mohd Yunus, Rosli and Khamis, Aidee Kamal (2006) The effect of homogeneous catalyst for the degradation of sodium dodecylbenzene sulfonate in water by means of ultrasonic irradiation. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2005) Development of real-time expert system for operability study analysis on oleochemical plant. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Ani, Farid Nasir and Tan, Jaan Soon and Mansor, Muhd. Ridzuan and Yusof, Ahmad Anas (2004) Energy Conversation In Gas Separation Application Using Carbon Absorption & Pressure Swing Adsorption (PSA) System. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Arsad, Agus and Sulaiman, Hanizam and Rahmat, Abdul Razak and Jaafar, Ahmad Tarmizi (2006) Combustion behavior of poultry and plastics waste in as bench scale combustor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Asli, Umi Aisah and Saidina Amin, Nor Aishah and Abdul Karim, Siti Kartina and Siregar, Tirena Bahnur (2005) Roles of bronsted acid sites in composite catalyst for triglyceride cracking. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Aziz, Azila and Idris, Ani and Abd. Rahman, Badarulhisam (2004) The optimization of the enzyme immobilization methods for amperometric glucose biosensors. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Aziz, Azila (2006) Production of enzymatic glucose biosensors. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Baharum, Sabariah and Mohd. Yusoff, Mohd. Rashid and Jaafar , Yunus (1990) Membina kaitan taklinear antara kepekatan zarahan terampai dengan variat-variat meteorologi. Working Paper. MARDI, Serdang.

Hashim, Shahrir and Hassan, Azman and Chew, Sau Yen and Ngoo , Kea Hing and Lim , Jian Wei (2003) Mechanical, chemical & flammability properties of ABS/PVC blends. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hashim, Shahrir and Wan Abdul Rahman, Wan Aizan and Toh, Show Chong (2003) Design and process for producing silance-crosslinked polyolefin compound. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Hassan, Azman and Abu Bakar, Aznizam and Wahit, Mat Uzir and Bee, Soo Tueen (2009) Structure-properties relationship of hybrid talc/calcium carbonate filled impact modified PVC composites. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Ibrahim, Kamarul 'Asri and Ahmad, Arshad and Ali, Mohamad Wijayanuddin and Mak, Weng Yee (2006) Development of fault detection, diagnosis and control system identification using multivariate statistical process control (MSPC). Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Lee, Kuan Yet and Ahmed, Iqbal and Idris, Ani and Mat Zain, Norashikin (2007) Production of flat and hollow fiber membranes for biodialysis application. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Mat, Hanapi and Othman, Norasikin and Ali, Noorhalieza (2006) Selective emulsion liquid membrane extraction of silver from photographic waste industries. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Mat, Hanapi and Samsuri, Ariffin and Wan Abdul Rahman, Wan Aizan and Othman, Norasikin and Chieng, Yu Yuan and Jong, Siaw Chuan and Zulkania, Ariany (2005) Study on demulsifier formulation for treating Malaysian crude oil emulsion. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Zakaria, Zainal and Yusoff, Zulkarnain (2006) Heat and mass transfer studies in liquefied petroleum gas storage operations. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Mat, Hanapi and Busairi, Abdullah Moch (1999) Production of organic acids from local raw materials. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Othman, Norasikin Liquid membrane extraction of silver from photographic waste. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Zakaria, Zainal and Mohd Norddin, Mohd.Noorul Anam and Tan, Siu Ming and George Paou, Terry (2000) The development of adsorbent based natural gas storage for vehicle application. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Yusof, Khairiyah and Hassim, Mimi Haryani and Tan, Sook Li and Ab Rashid, Siti Rafidah (2004) Formulation of model predictive control algorithm for nonlinear processes. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mokhtar, Munirah and Hassan, Azman and Rahmat, Abdul Razak and Abd Samat, Suriani (2005) Characterization and treatments of pineapple leaf fibre thermoplastic composite for construction application. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Morad, Norazian and Abd. Aziz, Mustafa Kamal (2006) High sensitivity differential scannning calorimeter (HSDSC) technique for assaying ginger oleoresin. Project Report. Centre of Lipids Engineering And Applied Research (CLEAR), Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Muda, Khalida (2007) Bioremendiation of Colour Contaminant for textile wastewater. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Muhammad, Ida Idayu and Abdul Majid, Fadzilah Adibah and Md Zaki, Nurul Asyikin (2005) Effect of various processing parameters on the quality of papaya fruit tea. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Muhammad, Ida Idayu and Razali, Firdausi and Md. Salleh, Liza (2005) Study of an active antimicrobial system using a bio-switch concept. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustafa, Azeman and Aziz, Madzlan and Ismail, Ahmad Fauzi and Hasbullah, Hasrinah and Sanip, Suhaila and Ng, Be Cheer and Hassan, Abdul Rahman (2006) Development of asymmetric carbon hollow fiber membrane for gas separation. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Noor Azlan, Morad and Abd. Aziz, Mustafa Kamal (2006) High sensitivity differential scanning calorimeter (HSDSC) technique for assaying ginger oleoresin. Project Report. Universiti Teknologi Malaysia, Skudai, Johor Bahru. (Unpublished)

Othman, Ariff and Abdul Kadir, Abdul Aziz (2000) Paraffin crystallization process under the influence of magnetic field. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Rahmat, Abdul Razak and Hassan, Azman and Wahit, Mat Uzir and Arsad, Agus (2009) Characterization of Glass fibre reinforced Polyamide/Acrylonitrile Butadiene-Styrene Composite for Automotive Application. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Rashid, Roslina Optimization And Modeling Of Lactic Acid Production From Pineapple Waste. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Saidina Amin, Nor Aishah and Kusmiyati, Kusmiyati and Soon, Ee Pheng and Ammasi, Sriraj (2007) Development of zeolite catalysts for the conversion of natural gas to ultraclean liquid fuel. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Samsudin, Sani Amril and Hassan, Azman and Abu Bakar , Aznizam (2004) Mechanical properties of oil palm empty fruit bunch impact-modified unplastices poly(vinyl chloride) composites-effect of fliter content and processing conditions. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Sanagi, Mohd Marsin and Wan Ibrahim, Wan Aini and Abu Naim, Ahmedy and Md Saleh, Noorashikin and Norfairulzukry, Norfairul Development And Application Of High Temperature High Performance Liquid Chromatography To The Analysis Of Pesticides And Persistant Organic Pollutants. Project Report. Faculty of Science , Skudai, Johor. (Unpublished)

Sarmidi, Mohd. Roji and Cheng, Kian Kai and Munusamy, Mahadevan (2005) Recovery of sodium citrate and citric acid by one step membrane electrodialysis process. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Sarmidi, Mohamad Roji (2005) Study of the antidiabetic action of cinnamon extract on cell culture of 3T3-Li adipocytes. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Syed Muhammad, Syed Annuar Fauad and Md. Illias, Rosli and Nik Mahmod, Nik Azmi (2000) Isolation and characterization of adhesive protein from green mussel (perna viridis). Project Report. Universiti Teknologi Malaysia. (Unpublished)

Taib, Mohd. Rozainee and Ngo, Saik Peng Production of amorphous silica from rice husk in fluidised bed system (penghasilan silika amorfus daripada sekam padi dengan sistem lapisan terbendalir). Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Taib, Mohamad Rozainee and Ngo, Saik Peng and Chong , Yee Hwang and Lee, Boon Pin (2002) Design and fabrication of a novel spinning fluidised bed. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Abdul Rahman , Wan Aizan and Ismail, Ahmad Fauzi (2005) Formation and characterization of mixed matrix composite materials for efficient energy gas separation. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Abdul Rahman, Wan Aizan and Chen, Chan Hoong and Cheah, Eng Chai and Mazlan, Mohd. Nazrul Hisyam and Lee, Tin Sin and Ahmad Rupaii @ Aziz, Norhaliza (2005) Design of silane crosslinkable high density polyethylene compounds for automotive fuel tank application. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yaacob, Zulkefli and Abdul Majid, Zulkifli (1998) Natural gas motorcycle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

A., Farizul and H. K., H. K. and N. A. S., Amina and D., Suhardy and S., Saiful Azhar and S., Mohd. Nazry (2006) Catalytic conversion of RBD palm oil to gasoline: the effect of silica- alumina ratio in HZSM-5. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

A., Siti Mariam and S., Eraricar and K., Norzieana and A. R., Mohd Redza and M., Ida Idayu (2007) Lauric acid as antimicrobial agent in J-carrageenan based antimicrobial milk. In: Asean Food Conference, 2007.

A. Majid, Rohah (2012) Study on synthesis of polypyrrole via chemical polymerization method. In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 November 2012, Penang, Malaysia.

A. N, Kabbashi and Z.A, MD. and Othan, Ahmadi (2006) Biocomposting process for utilization agro-industrial wastes. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

A. Rahman, Roshanida (2012) Effects on the critical micellar concentration by addition of tween 85 into reverse micelles system containing AOT-ISO-OCTANE for amoxicillin purification. In: The International Conference on Agricultural, Food and Biological Engineering, 11-13 Mei 2012, Guangzhou, China.

A. Z., Norashikin and R., Adnan and C. Y., Mohd Azizi (2009) Parameter on microwave and spray dryer for pineapple product b using response surface methodology (RSM). In: Malaysia International Conference on Trends in Bioprosess Engineering (MICOTriBE 2009), 2009, Putra World Trade Center, Kuala Lumpur .

Abd Hamid, Nur Idayu (2007) The effect of drying methods on the properties of microbial cellulose. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Abd. Aziz, Azila (2012) Initial study on the development of stable kacip fatimah-chitosan nanoparticles. In: 4th International Conference For The Wellness Industry (4Th ICBWI) Proceedings, 20-21 June, 2012, Kuala Lumpur, Malaysia.

Abd. Aziz, Azila (2012) Optimization of Tongkat Ali water extract production. In: 4th International Conference For The Wellness Industry (4Th ICBWI) Proceedings, 20-21 June, 2012, Kuala Lumpur, Malaysia.

Abd. Gapar, Muhayuddin (2007) The Effect of Impeller Configuration Configuration on Gas Hold up in Stirred and Aerated Bioreactor. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Abd. Hamid, Mohd. Kamaruddin and Gani, Rafiqul (2008) A model-based methodology for simultaneous process and control for chemical processes. In: Foundations of Computer-Aided Process Operations (FOCAPO) 2008, June 29 - July 2, 2008, Royal Sonesta Hotel, Cambridge, Massachusetts, USA.

Abd. Hamid, Mohd. Kamaruddin and Ibrahim, Norazana and Ibrahim, Kamarul Asri and Ahmad, Arshad (2006) Simulation of hydrogen production for mobile fuel cell applications via autothermal reforming of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abd. Hamid, Mohd. Kamaruddin (2012) Development of a sustainable integrated process design and control for chemical processes. In: 4th International Conference on Chemical and Bioprocess Engineering in Conjuction with the 26th Symposium of Malaysian Chemical Engineers, 21- 23 November 2012, Kota Kinabalu, Sabah, Malaysia.

Abd. Majid, Fadzilah @ Adibah (2012) Cytotoxicity and potential anti-inflammatory activity of selected edible herbs and spices on cultured human gingival fibroblasts. In: Seminar Fakulti Farmasi, UKM 2012, 2012.

Abdul Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan and Mohamed Noor, Norhayati (2012) Influence of amount of virgin cocunut oil in VCO loaded solid lipid particles sizes. In: 4th International Conference on Biotechnology for the Wellness Industry, 22 - 24 June 2012.

Abdul Aziz, Mustafa Kamal and Morad, Noor Azian and Mohd. Sulong, Mohd. Sulong (2003) Evaporation and distillation red oil from palm pressed fibres in semi-continuous structured packing pilot plant : experimental an economics factors. In: Malaysian Palm Oil Board International Palm Oil Congress (PIPOC), 2003, Putrajaya, Selangor.

Abdul Aziz, Mustafa Kamal and Morad, Noor Azian and Sulong, Mohd (2003) Pilot plant structured packing distillation in solvent extraction carotenoids from palm fibres : determination of H.E.T.P operating conditions and carotenoids compositions. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Jalil, Aishah and Abdullah, Zalizawati and Triwahyono, Sugeng (2006) The effect of sulfate ion on the synthesis of high octane fuel. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abdul Kadir, Mohammed Rafiq (2012) In vitro angiogenesis assay for the guidance of microvessel containing multi-cellular lumen formation. In: The International Conference on Agricultural, Food and Biological Engineering (ICAFBE 2012), 11-13 May 2012, Guangzhou, China.

Abdul Majid, Azri and Maarof, Mohd. Aizaini (2004) Real valued negative selection for anomaly detection in wireless ad hoc networks. In: Proceedings of the Postgraduate Annual Research Seminar 2006 (PARS 2006), 24 - 25 May 2006, Postgraduate Studies Department FSKSM, UTM Skudai.

Abdul Malek, Roslinda and Othman, Nor Zalina and Sarmidi, Mohamad Roji and Aziz, Ramlan and El Enshasy, Hesham Ali (2012) Optimization of bioreactor cultivation process for mass production of hendersonia SP: a novel strain applied for biological control of oil palm disease. In: 4th International Conference on Biotechnology for the Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21June, 2012, Kuala Lumpur, Malaysia.

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2006) Towards sustainable development using pinch analysis. In: SOMChe 2006, 19-20 December 2006, UiTM, Shah Alam.

Abdul Manan, Zainuddin and Tak Tee, Soon and Mohd. Yunus, Rosli (2003) Thermodynamic modelling of glycerine refining process. In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Manan, Zainuddin and Wan Alwi, S. R. (2007) Water pinch analysis evolution towards a holistic approach for water minimization. In: Asia-Pacific Journal of Chemical Engineering, 2007, UPM.

Abdul Rahman, Mohd. Yaccob Khan and Mohd. Yusoff, Mohd. Rashid and Mustapha, Saari and Fernandes, Alan A. (1989) Design of industrial baghouse : computer simulation technique. In: 5th. Chemical Engineering Symposium , 27-28 June 1989, Kuala Lumpur.

Abdulbari, Abdulbari and Ahmad, A. and Hameed, Bassim H. and Aziz, N. (2006) Basic dye removal from synthetic wastewater by adsorption on palm ash. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abidin, S.A.Z Development of an open source membrane steady state simulator. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Abu Bakar, N.F. and Ujang, Zaini (2004) Membrane Bioreactor For Leachate Treatment. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Abu Bakar, Aznizam (2012) Tensile properties and morphology of ethylene vinyl acetate/ epoxidized natural rubber/ halloysite nanotube (EVA/ENR-50/HNTs) nanocomposites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Abu Bakar, Aznizam and Hassan, Azman (2012) Tensile and impact properties in hybrid surface treated-oil palm empty fruit bunch (OPEFB)/ talc-filled poly(vinyl chloride) (PVC) composites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) Development of a new model-based intergrated process design and control for heat exchanger networks. In: 4th International Conference on Chemical and Bioprocess Engineering in Conjuction with the 26th Symposium of Malaysian Chemical Engineers, 21 - 23 November 2012, Kota Kinabalu, Sabah, Malaysia.

Agrawal, Pushpa and R., Hema and S., Mahesh Kumar (2006) Experimental investigation on biological hydrogen production using different biomass. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ahmad, Arshad and Abd Hamid, Mohd Kamaruddin (2002) Detection Of Multiple Sensor Faults In A Palm Oil Fractionation Plant Using Artificial Neural Network. In: Regional Symposium on Chemical Engineering in conjunction with Symposium of Malaysian Chemical Engineers, June 2002, Petaling Jaya.

Ahmad, Arshad and Abd Hamid, Mohd Kamaruddin (2002) Detection of Sensor Failure in a Palm Oil Fractionation Plant Using Artificial Neural Network. In: International Conference on Artificial Intelligence Applications in Engineering and Technology ICAIET 2002, 17-18 June 2002, Kota Kinabalu.

Ahmad, Arshad and Abd Hamid, Mohd Kamaruddin (2001) Neural Networks for Process Monitoring, Control and Fault Detection: Application to Tennessee Eastman Plant. In: Malaysian Science and Technology Congress, 2001, Melaka.

Ahmad, Arshad and Leong, Wah Heng (2001) Model-Based Fault Detection Using Hierarchical Artificial Neural Network. In: Regional Symposium on Chemical Enginering, 29-31 October 2001, Bandung.

Ahmad, Arshad and Abd Hamid, Mohd. Kamaruddin (2003) Pipeline leak detection system in a palm oil fractionation plant using artificial neural network. In: International Conference on Chemical and Bioprocess Engineering ICCBPE 2003 , August 2003, Kota Kinabalu.

Ahmad, Umi Kalthom and Singh, Jagjit (2003) Forensic analysis of shoe polish stains on several fabrics. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ahmad, A. L. and Mariadas, A. and Zulkali, M. M. D. (2004) Reduction of membrane fouling using a helical baffle for cross flow microfiltration. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia. (Unpublished)

Ahmad, A. L. and Ooi, B. S. and Zulkali, M. M. D. and Choudhury, J. P. (2004) Characteristic Of Co-Polyamide Nanofiltration Membrane : Effect Of Reaction Time. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ahmad, Arshad and Abd. Hamid, Mohd. Kamaruddin and Abdul Samad, Nor Asma Fazli (2007) Product optimization of a fed-batch fermentation process. In: European Congress of Chemical Engineering, 16-20 Sept. 2007, Copenhagen, Denmark.

Ahmad, Mazatusziha and Hassan, Azman and Rahmat, Abdul Razak (2004) Mechanical Properties of Rice Husk Filled Impact Modified PVC-U Composite. In: Malaysian Chemical Congress 2004 (MCC 2004), 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

Ajchariyapagorn, Araya and Douglas, Supaporn and Douglas, Peter L. and Pongamphai, Suwassa (2006) Simulation of safe processes using aspen plus: an economic evaluation. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Akhtar, Javaid and Soo, Kim Kuang and Saidina Amin, NorAishah (2009) Catalyzed liquefaction of empty palm fruit bunch (EPFB) in sub-critical water. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Al-Khateeb , Ismail K. and Flaih, Hanan H. and Al-Marsomi, Sabri (2006) Polarization functions of Pb-Sn-Cd alloys treated with sulfuric acid. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Alam, Md. Zahangir and Abd Karim, M. Ismail and Hamisan, Ahmad Fadhlan and Jamal, Parveen and Jalal, K.C.A. (2006) Liquid state bioconversion of palm oil mill effluent for cellulase production: statistical optimization of process conditions. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ali, Md. Imtiaj and Schneider, Philip A. (2006) Modelling of struvite chemistry. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ali , Md. Imtiaj and Schneider, Philip A. (2006) Development and commissioning of controlled struvite crystallization in pilot scale. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ali, Nora'aini and Mohammad, Abdul Wahab (2004) The Development Of Predictive Modeling Of Nanofiltration Membrane Properties : A Review. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Alias, Noor Izawati (2007) Normalization And training effects of normalization and training algorithms on multilayer perceptron algorithms on multilayer perceptron (MLP) network performances. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Alsobaai, Ahmed Mubarak and Bassim, H. Hameed and Ridzuan, Zakaria (2006) Hydrocracking of gas oil using USY-zeolite-based catalyst. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Amilia, L and Lang, D and Mohammad, A. W. (2004) Synthesis and characterization of clay filled polysulfone membran: the effect of composition and calcination of clay. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ani, Farid Nasir and Wong, Chuan Chin (2003) Pyrolysis of oil palm wastes. In: Regional Conference On Energy Technology Towards A Clean Environment, 2003, Phuket, Thailand.

Anuar, Aznah Nor and Ujang, Zaini (2009) Development of aerobic granular sludge in hot climates. In: Proceeding of 1st IWA- Development Congress Developing Countries, 2009, Sheraton Historinca, Mexico City.

Ariffin Samsuri, (2013) Hydraulic fracturing candidate-well selection by interval type-2 fuzzy set and system. In: Society of Petroleum Engineers - International Petroleum Technology Conference 2013, IPTC 2013: Challenging Technology and Economic Limits to Meet the Global Energy Demand.

Arsad, Agus and Rahmat, Abdul Razak and Hassan, Azman and Iskandar, Shaipul Nizam (2009) Flow characteristics of PA6/ABS blends. In: Malaysia Polymer International Conference, 2009, Palm Garden Hotel, IOI Resort Putrajaya.

Arsad, Agus and Rahmat, Abdul Razak and Hassan, Azman and Nasir, M. (2007) Characterization studies of polyamide-6 (PA6) with acrylonitrile-butadiene-styrene (ABS) blends. In: VIIth National Symposium on Polymeric Materials 2007 NSPM, November 27 – 28, 2007, Universiti Kuala Lumpur. Kuala Lumpur.

Arsad, Agus and Hassan, Azman and Mohd Idris, Mohd Nizam and Rahmat, Abdul Razak (2006) THE MECHANICAL PROPERTIES OF NYLON 6 (PA6)/ACRYLONITRILE-BUTADIENE-STYRENE (ABS) BLENDS. In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Awang, Mariyamni and Mat, Ramli (2004) The importance of the choice of text book in studying and teaching thermodynamics. In: Conference on Engineering Education 2004, 14-15 Dec 2004.

Awang, Mariyamni and Mat, Ramli and Hassan, Onn (2005) Bottom-up approach of teaching classical thermodynamics in the Faculty of Chemical and Natural Resources Engineering, UTM. In: Regional Conference on Engineering Education, December 12--13, 2005, Johor, Malaysia.

Azhari, Noor Aliza (2007) Adherence Of Drug In Tablet Dosage Form On Mammalian Oesophagus. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Azman, Hassan (2002) The Use Of Brabender Plasticorder To Study The Fusion Behaviour Of Calcium Carbonate Filled Impact-Modified Pvc-U. In: proceeding of the Research Seminar on materials and Construction, 29 -30 October 2002, Universiti Teknologi Malaysia.

Aznizam Abu Bakar, (2013) Mechanical properties of chitosan modified montmorillonite filled tapioca starch nanocomposite films. In: Green Technologies For Sustainable & Innovation In Materials.

Banerjee, Sujoy and Debnath, Mira (2006) Kinetic parameter studies of 6-amino penicillanic acid (6-APA) production by agarose immobilized penicillin acylase in a packed column reactor. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Bono, Awang and Prabakar, A. and Yan, Yan Farm (2006) Effect of ultrasound on adsorption of azeotropic and non-azeotropic mixture onto activated carbon. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Bujang, Kopli and Shin Ying, Ang and Awang Adeni, Dayang Salwani (2006) Effects of filtration volume using powdered activated charcoal on the recovery of L (+)-lactic acid from sago starch. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

C., S. Ho and Matsuoka, Y. and L., W. Chau and B., T. Teh and J., J. Simson and K., Gom (2013) Blueprint for the development of low carbon society scenarios for Asian regions- case study of Iskandar Malaysia. In: 4th International Conference on Energy and Environment 2013, ICEE 2013, 5 March 2013 through 6 March 2013, Putrajaya; Malaysia. (Submitted)

C. Y., Mohd Azizi and N. A., Nik Norulaini and B. Setianto, Wahyu and A. K., Mohd Omar (2006) Supercritical carbon dioxide extraction of constituents of pithecellobium jiringan seeds and their identification using time of flight gas spectrometry. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chan, Wei Gie (2007) Effect of Prebiotic(Inulin) on the Probiotic Viability in the Chocolate during Storage. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Che Man, Siti Hajjar and Hashim, Azanam and Md Akil, Hazizan (2006) Preparation and Characterization of Styrene-Methyl Methacrylate in Deproteinized Natural Rubber Latex (SMMA-DPNR). In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Chen, C.H and Wan Abdul Rahman , Wan Aizan and Kumar, Bala (2005) Chemical Effect On Rotational Molding Grade Cross-Linked High Density Polyethylene (Xlhdpe) With Varying Concentration Of Antioxidant And Uv Stabilizer. In: Simposium Polimer Kebangsaan Ke-V, 23-24 August 205, Residence Hotel, UNITEN.

Chew, Yin Hoon and Lee, Chew Tin (2006) External mass transfer model for a recirculated packed-bed batch reactor on the hydrolysis of palm olein using immobilized lipase. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chew Tin, Lee (2003) Intensification of Inclusion body Purification and Protein Refolding. In: 6th Interlaken Conference on Advances in Production of Biologicals: From Gene to Market. , 25-30th March 2003, Interlaken, Switzerland.

Chowdhury, Ahmed Jalal Khan and Alam, Md. Zahangir and Shahlizah, Sahul Hamid (2006) Isolation, purification and screening of fingal strain for effective bioconversion of palm oil mlll effluent. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chua, Lee Suan and Sarmidi, Mohamad Roji and Shamsul Annuar, Nur Arbainah (2012) Triacylglycerols in non heat treated virgin cocunut oil. In: 4th International Conference on Biotechnology for the Wellness Industry, 20-21 June, 2012, Kuala lumpur, Malaysia.

Chuan, Chin Hooi and Krishnaiah, Kamatam and Michael Wong, Clemente and Janaun, Jidon (2006) Palm kernel cake as substrate for ß-Mannanase production by Bacillus subtilis ATCC3366 under submerged and solid state fermentations. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Derek, C. J. C and Zulkali, M. M. D. and Ahmad, A. L. (2004) In-situ extracellular protein isolation of yarrowia lipolytica through membrane technology: A review. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Douglas, Peter L. and Croiset, Eric and Elkame, Ali and Alie, Colin and Shafeen, Ahmed and Hashim, Haslenda (2006) Carbon capture and storage from the boiler to the fleet - A canadian case study. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

El Enshasy, Hesham (2012) Development of an efficient expression system for therapeutic PA-1 lectin production in escherichia coli (B2-13). In: The 4th International Conference on Biotechnology for the Wellness Industry (4th. ICBWI), 20-21 June 2012, Kuala Lumpur, Malaysia.

El-Sayed Nasef, Mohamed Mahmoud and Saidi, Hamdani (2003) Radiation grafted proton exchange membrane for PEM fuel cells: current status and future development In Malaysia. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Fazli Abdul Samad, Noor Asma and Ahmad, Arshad (2006) Comparison product optimization performance of fed-batch fermentation processes for penicillin g production. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ghazali , Z. and Wan Nik, W. B. and Ku Bulat, K. H. and Ani, F. N. and Xian, L. F. (2006) The effect of light on the oxidative stability of palm olein. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Goh, Meng Seng and Awang, Mariyamni and LimXin, Yi and Ani, Farid Nasir (2006) Production of pyrolytic oil for enhanced oil recovery. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Goto, Masahiro (2006) Protein biomass as new adsorbent for precious metal ions. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Hafiz, W. A. and Ismail, A. F. and Khoo, T. C. (2004) Effect of shear rate on the performance of membrane-assited lead acid battery. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Hairon, Hariyana (2007) Purification and characterization of recombinant recombinant chitinase chitinase from trichoderma virens UKM-1 expressed in Escherichia coli. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Halim, Noor Azlina and Nasri, Noor Shawal and Songip, Ahmad Rahman (2003) Development of new catalyst for low temperature water gas shift reaction. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Hasani, Hamirosima (2007) Production Of Maltose By Using Enzymatic Starch Hydrolysis. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hashim, Haslenda and Douglas, Peter and Croiset, Eric and Elkamel, Ali (2006) CO2 mitigation for a network of power plants using mathematical programming. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Hashim, Haslenda (2012) Scheduling of integrated green electricity generation from agro-waste for eco-communities. In: International Conference on Recycling and Reuse 2012, 4-6 Jun, 2012, Istanbul, Turkey.

Hashim, Shahrir (2012) Swelling properties of oil palm empty fruit bunch-graft-poly acrylamide, polyacrylic acid, and poly(acrylic acid-co-acrylamide). In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 July, 2012, Langkawi, Malaysia.

Hashim, Shahrir and Abdul Majid, Rohah (2012) Release kinetics of urea fertilizer from oil palm empty fruit bunch grafted polyacrylic acid (OPEFB-g-PAA) hydrogels. In: National Symposium On Polymeric Materials (NSPM 2012), 3-5 October, 2012, Penang, Malaysia.

Hassan, Azman (2002) Toughness Enhancement of Polymers. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Hassan, Azman and Piah, M.A.M and Darus, Ahmad Leakage current and surface discharge phenomena: Effect on tracking and morphological properties of LLDPE-natural rubber compounds. In: Proceeding of the IEEE International Conference on Properties and Application of Dielectric Material, 1st-5th June 2003, Nagoya.

Hassan, Azman and A., Akbari and S., Talebanfard (2010) The effect of the structure of clay and clay modifier on polystyrene-clay nanocomposite morphology: a review. In: Polymer-Plastics Technology And Engineering, 2010, ISSN.

Hassan, Azman and Abu Bakar, Aznizam and Bee, Soo Tueen (2007) Mechanical properties of tale and celcium carbonate filled PVC. In: Regional Annual Fundamental Science Seminar, 2007.

Hassan, Azman and Sivaneswaran, K. (2002) The effect of rice husk ash fillers on processability of ABS impact modified PVC-U. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Hassan, Azman and Wahit, Mat Uzir (2012) The effect of organoclay contents on the mechanical and morphological properties rubber toughened polyamide 6 nanocomposites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Hassan, Azman and Wahit, Mat Uzir and Sabet, Mazylar (2007) Modified effect of LDPE/EVA blend by electron beam irradiation. In: Regional Annual Fundamental Science Seminar (RAFSS 2007), 28-29 May 2007, Johor Bahru.

Hassan, Azman and Wong, Yean Jwu (2005) Mechanical properties of high impact Abs/Pc blends - effect of blend ratio. In: Simposium Polimer Kebangsaan 2005, 23-24 August 2005, Hotel Resident, UNITEN.

Hassan, Azman (2012) Effect of coupling agent on mechanical and thermal behaviour of oil palm/jute hybrid composites. In: 8th International Materials Technology Conference And Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Hassan, Nursia (2007) Production of recombinant Chitinase from Trichoderma virens Ukm-1 in E.Coli. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Henry Nasution, (2013) Experimental study on the replacement of HFC-R134A by hydrocarbons in automotive air conditioning system. In: Applied Mechanics And Materials.

Husin , Nurdiyana (2007) PHYSICOCHEMICAL AND BIOCHEMICAL CHARACTERISATION OF PERAH PERAH SEED OR TAPOS. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hussein, Norelyza (2007) Adherence of lithocarpusspp(manjakani)and chlorpheraminein tablet dosage form on mammalian oesophagus. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hussin, Salwa and Shahir, Shafinaz and Ismail, Abd. Khamim (2009) A locally developed microbial consortium for short-term biochemical oxygen demand (BODst) sensing. In: International Congress of Malaysian Society for Microbiology (ICMSM 2009) , 2009, Hotel Parkroyal, P. Pinang.

Hussin Mohd. Nor, (2013) Synthesis and characterization of supramolecular elastomers from polyacids composed of vegetable oils. In: Advanced Materials Research.

I.M., Noor and M., Hasan and K.B., Ramachandran (2006) Effect of carbon and nitrogen sources on the production of lipase by Candida cylindracea 2031 in batch fermentation. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ibrahim, N. and Ahmad, A. L. and Bhatia, S. (2004) Removal of suspended solids and residual oil using membrane separation technology. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ibrahim, Norazana and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2012) The combustion behaviour of flash pyrolysis oil. In: 26th Symposium of Malaysian Chemical Engineers (SOMChE-2012) and 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 November, 2012, Sabah, Malaysia.

Idris, Ani and Ahmed, Iqbal (2006) An economical production of polyethersulfone asymmetric membranes using mixture of two solvents and lithium chloride as additive. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Idris, Ani (2012) Effect of photoperiod on the growth of unicellular microalgae nannochloropsis sp. In: The 2012 International Conference On Agriculturel, Food And Biological Engineering (ICAFBE 2012), 2012.

Idris, Ani and M. S., Suhaimi and N. A., Mohd. Zain (2007) Determination of effective diffusion coeficient of immobilized baker's yeast invertase in various concentration of PVA-alginate matrix. In: Proceedings of the International Conference on Biotechnology Engineering (ICBioE'07), 8-10 May 2007, Kuala Lumpur.

Idris, Ani and Mohd. Yusof, Noordin (2012) Treatment of Cr(VI) using PVA-alginate ferro photo gels under different types of lamps. In: The 2012 International Conference on Agriculturel, Food and Biological Engineering (ICAFBE 2012), 11-13 May, 2012, Guangzhou, China.

Idris, Ani and Mohd. Yusoff, Noordin (2003) Effect of bore fluid on reverse osmosis hollow fiber membranes. In: Scientific Conference of the Electron Microscopy Society Malaysia, 2003, Langkawi, Kedah.

Idroas, Mariani and Zakaria, Zainal (2012) Modelling on ultrasonic tomography instrumentation system for monitoring flaw in pipeline coating. In: 4th International Conference on Science and Technology 2012, 2012.

Ikram-ul-Haq, Ikram-ul-Haq and Mukhtar, Hamid (2006) Kinetics of invertase synthesis by Saccharomyces cerevisiae in synthetic medium. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ilbeygi, H. and Ismail, Ahmad Fauzi and Nasef, Mohamed Mahmoud and Jaafar, J. and Jalalvandi, E. and Panahi, P. (2013) Electerochemical study of speek/cloisite 15a (r)/tap membrane at moderate temperature for DMFC application. In: Advances In Applied Materials And Electronics Engineering Ii.

Iqbal, Nida and Abdul Kadir, Mohammed Rafiq and Nik Malek, Nik Ahmad Nizam and Mahmood, Nasrul Humaimi (2012) Effect of metal ions on the antibacterial properties of hydroxyapatite : synthesis and characterization. In: 3rd International Symposium on Biomedical Materials: Recent Advances and Challenges, 18-20 December 2012, Lahore, Pakistan.

Ismail, Al Emran and Wan Muhammad , Wan Nur Azrina and Abd Rahim, Amirusham (2006) Effect aging treatment on tensile properties of natural fiber reinforced polyester composites. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ismail, Ahmad Fauzi and Tee, J. C. and Aziz, Madzlan (2007) Influence of catalyst preparation on synthesis of multi-walled carbon nanotubes. In: Nanotech Malaysia 2007 & 4th Asia Nano Forum Summit 2007, 2007, PWTC, Kuala Lumpur.

Ismail, Issham (2012) Enzyme application in horizontal openhole wellbore cleaning: optimization and comparison between alpha amylase and pullulanase. In: National Doctoral Forum of Future Petroleum Engineers, 18-20 May 2012, Beijing, China.

Ismail, Mohammad (2012) Extraction of alkaline solution from cocoa pod husk for synthesis of geopolymer. In: The First Australia and South-East Asia Structural Engineering and Construction Conference, 28 Nov - 2 Dec 2012, Perth, Australia.

Ismail, A. F. and Hassan, A. R (2004) Characterization of nanofiltration membranes by the solute transport method: Some practical aspects in determining of mean pore size and pore size distributions. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ismail, Issham and Ikhsan, Azman (1997) Kajian aliran dua fasa dengan menggunakan model berskala makmal. In: Seminar Kebangsaan Teknologi Makmal ke-3, 20-21 Oktober 1997, USM, Pulau Pinang.

Ismail, Issham and Junin, Radzuan and Md. Abidin, Amat Rashidi (2000) Pemendakan kerak di dalam talian paip. In: Malaysian Science & Technology Congress 2000, November 7-9, 2000, Awana Golf & Country Resort, Genting Highland..

Ismail, Issham and Mohd. Arshad, Azmi (1995) Pengukuran keabrasifan hematit tempatan pada skala makmal. In: Seminar kebangsaan Teknologi Makmal, Oktober 1995, UTM Skudai.

Ismail, Nor Faekah (2007) Modeling of Insulin Receptor Modeling of Insulin Receptor Binding & Recycling Binding & Recycling Subsystem. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jaafar, Mohd. Zaidi (2012) Measurement of streaming potential coupling coefficient on carbonate rocks for downhole monitoring in smart wells. In: The 6th South East Asia Technical Universities Consortium (SEATUC) Symphosium, 2012.

Jaafar, Mohd. Zaidi and Manan, M. A. (2012) Measurement of electrokinetic potential on carbonate rocks for monitoring water movement in the oilfield. In: The 10th International Symposium on Electrokinetic Phenomena, 20-24 May 2012, Tsukuba, Japan.

Jafari, Hasan and Idris, Mohd. Hasbullah and Ourdjini, Ai and Ahmad, M. T. (2009) Thermomechanical treatment on AZ63 alloy. In: The 1st AUN/SEED-Net Regional Conference on Materials 2009, 2009, Universiti Sains Malaysia, Pulau Pinang.

Jalil, S. and Ismail , A.F. and Hashim, S. Preparation and characterization of polyethersulfone hollow fiber nanofiltration membranes made from PES/NMP/PEG 400/WATER. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Jalil , Abdul Rahim and Mohd Nawawi, Mohd Ghazali and Mohd Sakri, Norhaslina and Jusoh, Nor Zamiha (2006) Adsorption selective carbon membrane the for separation of O2/N2 and C1-C4 Hydrocarbon/N2. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Jalin, Lenny (2007) Physical properties and sensory attribute of coconut moisturizer with Vitamin E. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Saleh, Nurul Umi (2006) Screening for potential strain to produce bioprotein from cheaper carbon source. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Jamaluddin, Jafni (2007) Evaluation of Preservative Properties in Psidium Guajava Leafs Using Hydro-Alcoholic Extraction. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jamarosliza Jamaluddin, (2013) Curing properties of uv-cured pressure sensitive adhesives. In: Advanced Materials Research.

Jati Charlie, Agnese (2007) Expression of chitinase gene from T Trichoderma virens IN Escherichia coli. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jawaid, M and Hassan, Azman and Abdul Khalil, H.P.S (2013) Effect of coupling agent on mechanical and thermal behaviour of oil palm/jute hybrid composites. In: Green Technologies For Sustainable & Innovation In Materials.

Jian-Jiang, Zhong (2006) The state of the art in the production of bioactive metabolites from in vitro plant and mushroom cultures. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Jing, Sheng Pang and Xie, Fang and Centeno, Anthony and Peter, K. Petrov and Mary, P. Ryan and Alford, Neil (2012) Optical absorption of metal nanoparticle arrays. In: Renewable Energy and the Environment, Nov.11 - Nov14, 2012, Eindhoven, Netherlands.

Johari, Khairiraihanna and Saman, Norasikin and Shiow, Tien Song and Mat, Hanapi and Stuckey, David C. (2013) Utilization of coconut milk processing waste as a low-cost mercury sorbent. In: Industrial And Engineering Chemistry Research.

Justin, T.J.L and Rashid, M.Y.M. (2006) The sensitivity of harp model on atmospheric boundary mixing heights. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

K.Y., Pin and T.G., Chuah and A., Abdull Rashih and M.A., Rasadah and C.L., Law and T.S.Y., Choong (2006) Aqueous extraction of hydroxychavicol from Piper Betle L. leaves. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kadhum, A. A. H. and Mohamad, A. B. and Daud, W. R. W. and Harahap, N. and Sitanggang, R. (2004) Water permeability study of Nafion® 117 membrane after undergoing hot press. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Kadhum, A. A. H. and Mohamad, A. B. and Daud, W. R. W. and Sitanggang, R. (2004) Water permeability study of Membrane Electrode Assembly (MEA) fabrication using X-Y robotic sprayer machine. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Kamsah, M. Z. and Abd. Muis, Z. and Jusoh, M. and Ngadi, N. Surviving the first year engineering programmes at Universiti Teknologi Malaysia. In: RCEE 2004.

Kamsah, Nazri and Mohd. Top, Nurul Nadiah (2009) Thermally-induced strain in FCBGA microelectronics package subjected to transient temperature loading. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Kamsah, M. Z. and Jusoh, M. and Muis, Z. (2004) Students’ Entrance Requirement and Success in Engineering Programmes. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Kanao Fukuda, (2013) Influences of trace water in hydrogen and argon on the tribological properties of pure iron. In: Proceedings Of The ASME/STLE International Joint Tribology Conference, IJTC 2012.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2005) “Preliminary study of antimicrobial (AM) effects of starch-based film incorporated with nisin, lysozymes and lauric acid”. In: SKAM -18, 12-14 September 2005, Hyatt Regency Hotel, Johor Bahru..

Khoo, T. C. and Wan Hassan, W. A. H. and Ismail, A. F. Development of a maintenance free tropicalized lead acid battery enhanced by membrane technology. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Kong , Bee Hong and Ismail, Aidawati Azlin and Mohd Mahayuddin, Mohamed Ezzaham and Mohamed, Abdul Rahman and Sharif Zein, Sharif Hussein (2006) Production of high purity multi-walled carbon nanotubes produced from catalytic decomposition of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kuik, Sok Ping and Salim, Naomie (2006) Optimized subtractive clustering for cluster-based compound selection. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kumoro, A. C. and Hasan, Masitah (2006) Modelling of andrographolide extraction from andrographis paniculata leaves in a soxhlet extractor. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kusworo, Tutuk Djoko (2003) Optimization of partial oxidation of methane to hydrogen production over NiO-CoO-MgO solid solution catalyst using statistical experimental design. In: National Symposium on Science and Technology, 2003, Selangor.

Kusworo, Tutuk Djoko and Songip, Ahmad Rah (2003) Autothermal reforming of methane to hydrogen production over cobalt-nickel catalyst supported MgO solid solution. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Lau, Chin Guan and Endud, Salasiah (2003) Phase transformation of mesoporous molecular sieves: effect of hydroxide. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Law, Hoi Ling (2007) The effect of lauric acid as antimicrobial agent in chitosan-based packaging film. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Lee, Chew Tin (2012) Integrated palm oil biomas management in Iskandar Malaysia through mixed integer linear programming. In: 9th Biomass-Asia Workshop, 3-4 December, 2012, Tokyo, Japan.

Lee, Chew Tin (2012) Microbial-powered composting: from fundamental studies to low carbon scenario. In: Proceeding of International Symposium of Harnessing Microbes for Human Health and Resources Recuperation, 2012.

Lee, Chew Tin and Chua, Lee Suan and Sarmidi, Mohamad Roji and Razali, Firdausi (2012) Effect of effective microorganisme on carbon mineralization during composting. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20-21 June 2012, Kuala Lumpur, Malaysia.

Lee, Chew Tin and Hashim, Haslenda (2012) Optimal planning of waste-to-energy through mixed integer linear programming. In: 7th CUTSE Conference, School of Engineering & Science, Curtin University Sarawak Malaysia, 6-7 November, 2012, Miri, Sarawak.

Lee, Chew Tin and Sarmidi, Mohamad Roji and Chua, Lee Suan and Razali, Firdausi (2012) Effective microorganism on C mineralization during composting. In: Proceeding of the 4th IInternational Conference on Biotechnology for the Wellness Industry (ICBWI 2012), 20-21 June 2012, Kuala Lumpur, Malaysia.

Lee, CT and Middelberg, Anton (2001) Protein refolding in an oscillatory-flow-mixing reactor. In: The Proceeding of the 10th European Congress on Biotechnology, 8-11th July 2001, Madrid, Spain.

Lim , J.W. and Hassan, Azman and Abu Bakar, Aznizam (2002) Effect of Methyl Methacrylate Grafted Natural Rubber-49 on Mechanical Properties of Filled Calcium Carbonate Unplasticised PVC. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Lim , Ai Tee (2007) Modeling of Insulin Binding System Using Artificial Neural Network. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Lim, J. W. and Hassan, Azman and Wahit, Mat Uzir and Rahmat, Abdul Razak (2004) Rubber Toughened Polypropylene Nanocomposite: Effect of Compatibilizer Content on Mechanical Properties. In: Malaysian Chemical Congress 2004 (MCC 2004) , 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

M.S., Meor Yusoff and Muslim, Masliana and Choo, Tye Foo and Murshidi, Julie Andrianny (2006) High purity alumina and zeolite from local low grade kaolin. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ma’amor, Azman and Abd Hamid, Sharifah Bee (2006) Combinatorial technology in heterogenous copper-based catalysis. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Manan, Zain A four day workshop on maximising utility savings and minimising utility savings and minimising emissions in process industry using pinch analysis. In: A Four Day Workshop on Maximising Utility Savings and Minimising Utility Savings and Minimising Emissions in Process Industry using Pinch Analysis. (Unpublished)

Masngut, Al Nasratun and Takriff, Mohd Sobri and Mohammad, Abdul Wahab and Kalil, Mohd Sahaid and Hassan Kadhum, Abdul Amir (2006) Performance of oscillatory flow reactor and stir tank reactor in solvent fermentation from palm oil mill effluent. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mat, Ramli and Saidina Amin, Nor Aishah and Ramli, Zainab and W. Abu Bakar, W. Azelee (2006) Ethylene conversion to higher hydrocarbon over copper loaded BZSM-5 in the presence of oxygen. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mat Isa, Naurah and Jamaluddin, Jamarosliza and Mat Jidin, Mazni and Wan A.Rahman, Wan Aizan (2002) Oil Palm Frond (OPF) or Coir Fiber (CF): Effect of Particle Sizes on the Tensile Properties and Morphology of Natural Fiber Reinforced HDPE. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Mat Uzir Wahit, (2013) The effect of compression temperature and time on 2D woven kenaf fiber reinforced acrylonitrile-butadiene-styrene (ABS). In: Applied Mechanics And Materials.

Mat Uzir Wahit, (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: Applied Mechanics And Materials.

Mat, Hanapi and Mat, Ramli and Othman, Norashikin (1998) Selective nickel recovery from the spent catalyst. In: Simposium Kimia Analisis Kebangsaan ke Sebelas , 6-7 Oktober, 1988, Fakulti Sains, Universiti Teknologi Malaysia.

Mat, Hanapi and Tang, B.S. and Y., Yuliusman and Othman, Norashikin (1999) Selective extraction of silver from semiconductor waste. In: World Engineering Congress 1999, 19-22 July 1999, Kuala Lumpur.

Mat, Hanapi and Y., Yuliusman and Othman, Norasikin (1999) Selective nickel recovery from spent catalyst. In: World Engineering Congress 1999, 19-22 July 1999, Kuala Lumpur.

Md Isa, A. A. and Hassan, A. and Shafawi, A. (2004) Membrane application for separating amine from effluent water. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Md Piah, Md Afendi and Darus, Ahmad and Hassan, Azman (2002) Effect of ATH Fillers on the Surface Tracking and Erosion Resistance of Natural Rubber-LLDPE Blends. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Mohamed Noor, Norhayati and Abd. Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan (2012) Influence of amount of virgin coconut oil in VCO loaded solid lipid particles size. In: 4th International Conference On Biotechnology For The Wellness Industry 2012 Proceedings, 20-21 June, 2012, Kuala Lumpur, Malaysia.

Mohamed Saaid, Muhammad Faiz and Ibrahim, Zuwairie and Sudin, Shahdan and Khalid, Marzuki and Sarmin, Nor Haniza (2009) DNA computing readout approaches: a review. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM 09), 2009, Melaka.

Mohd Ali, Ozair and Chu, K.L. and Wang, C.W. (2006) Neutral lipid profile of sago worm, the larva of weevil rynchophorus ferrugineus. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd Fadzal, Mohd Fadzli (2007) Application of effective microorganisms technology on management and meat quality of japanese quail. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd Ismail, Nur Suraini (2007) Optimization Of Ethanol Production In Yeast Fermentation Process Based On Mixing Time. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd Nasir, Nashrul Fazli and Ying, Yang and Che Ahmad, Azlan and Kadri, Nahrizul Adib (2006) Application of sol gel technique for glucose oxidase immobilization in biosensor application. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd Said, Nassya (2007) Stability study of meat tenderizer powder. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd Tahir, Norhayati and Yeow, Nicholas Jee Sing (2006) Adsorption of metsulfuron-methyl on soils under oil palm plantation: a case study. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd Yusof, Abdul Halim and Ulbricht, Mathias (2006) Entrapping method surface modification for preparation of membrane adsorber. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd. Baharia, Zaratulnur and Ibrahim, Zaharah and Jaafar, Jafariah and Shahir, Shafinaz (2012) Microbial oxidation of arsenite by Bacillus Cereus and Microbacterium Foliorum bacteria isolated from a gold mining environment. In: 15th International Biotechnology Symposium and Exhibition (IBS 2012), 16-21 September 2012, Daegu, Korea.

Mohd. Norddin, (2013) Study on catalyst loading using speek/CSMM membrane in DMFC. In: Proceedings Of The 2013 IEEE 7th International Power Engineering And Optimization Conference (PEOCO2013).

Mohd. Said, Farhan and Sarmidi, Mohamad Roji and Md. Kamal, Siti Aswani (2003) Preliminary study: effect of heat stress on the survival of lactobacillus bulgaricus in Semidefined Medium (SDM). In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Mohd. Yunus, Rosli and Saoud, Amer Ali and Abd. Aziz, Ramlan (2003) Characterization of microwave-assisted extraction process. In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Mohd. Yusof, Khairiyah Artificial neural network modelling of steady state chemical engineering systems. In: Malaysia-Japan Seminar on Artificial Intelligence Applications in Industry.

Mohd. Yusof, Khairiyah (2002) Connectionist models of a crude oil distillation column for real time optimisation. In: Regional Symposium on Chemical Engineering 2002, Songkla, Thailand, 2002, Thailand.

Mohd. Yusof, Khairiyah Pore size determination of asymmetric membrane using neural network. In: International Conference on Chemical & Bioprocess Engineering, Kota Kinabalu, August 27-29 03, pp 755-760.

Mohd. Yusoff, Mohd. Rashid and Noorddin, I. and Mohamad, S. (2007) Assessment of radiation and radioactivity from the incineration of oil-sludge using the rotary KILN incineration facility. In: International Conference on Natural Resources and Environmental Management 2007 And Environmental Safety and Health 2007 [NREM & ESH 2007] , 27 - 29 November 2007, Kuching, Sarawak.

Mohd. Yusoff, Mohd. Rashid and Abdul Aziz, Ramlan and Shafil, Azman Firdaus (1987) Particle size characteristics of a palm oil mill boiler flyash. In: Seminar on : Modern Method of Particle Characterization, 19 November 1987.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Jaafar, Jaafariah and Wood, Abd. Khalik (1988) Kepekatan unsur logam berat di dalam debu jalan bandaraya Kuala Lumpur. In: Simposium Kimia Analisis Kebangsaan Ke Dua Universiti Sains Malaysia, September, 1988, Universiti Sains Malaysia.

Mohd. Yusoff, Mohd. Rashid and Harun, Mohd. (1988) Scanning electron microscope study of fine and coarse airborne particle in Kuala Lumpur. In: First Particulate Technology Conference '88 Kuala Lumpur, 7-9 September, 1988, Kuala lumpur.

Mohd. Zaki Kamsah, (2013) Renewable energy and carbon footprint emission at University Technology Malaysia (UTM). In: Advanced Materials Research.

Mohsin, Rahmat and Abdul Majid, Zulkifli (2012) Engine performance and emission characteristic of diesel dual fuel engine fueled with biodiesel- diesel fuel blends. In: International Conference on Biomass for Biofuel and Value Added, 23rd - 24th October 2012 , Kuala Lumpur, Malaysia .

Muhamad, Ida Idayu and Che Yunus, Mohd. Azizi and Sarmidi, Mohamad Roji and Idham, Zuhaili (2012) Physicochemical characteristics and temperature degradation of red natural colourant from hibiscus sabdariffa anthocyanins. In: 4th International Conference on Biotechnology for The Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21 Jun, 2012, Kuala Lumpur, Malaysia.

Muhamad, Ida Idayu and M. Z., Nururl Asyikin and M. S., Liza (2007) Physical properties of microwave dried papaya with blanching pre-treatment. In: 10th Asean Food Conference 2007, 21-23 August 2007, Sheraton Hotel and Towers, Selangor.

Muhamad, Ida Idayu and Abdul Talib, Siti Zalita and Abdullah, M. Zailani and Mahat, M. Khairizal and Ho, Kek Sian (2005) Improve production of microbial cellulose by acetobacter xylinum with addition of microparticles in synthetic and complex media under shaking culture conditions. In: ICCBPE/SomChE, UMS, Sabah, 15-17 December, 2005, UMS, Sabah.

Mukhtar, Hamid and Ikram-ul-Haq, Ikram-ul-Haq (2006) Simultaneous production of protease and alpha amylase by Bacillus subtilis in a microprocessor controlled fermentor. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Murali, V. and Ramamurthy, T.N. and Krishna, M and Kulkarni, R.S. (2006) A comparative evaluation of the performance and emission characteristics of compression ignition engine using water diesel emulsion as fuel. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Murgan, V. K. and Abdul Mutalib, M.I. (2006) Simulation study on the application of reactive distillation (RD) column for producing ethyl acetate via esterification of acetic acid with ethanol. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mustaffar, M. I. and Ismail, A. F. and Illias, R.M (2004) Study on the effect of polymer concentration on hollow fiber ultrafiltration membrane performance and morphology. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

Mustapa, Mohd Shahril Ezuan and Hassan, Azman and Rahmat, Abdul Razak (2005) Preliminary Study On The Mechanical Properties Of Polypropylene Rice Husk Composites. In: Simposium Polimer Kebangsaan Ke-V, 23-24 August 205, Residence Hotel, UNITEN.

Nadia Adrus, (2013) The rubber elasticity of poly(n-isopropylacrylamide) hydrogel networks. In: Advanced Materials Research.

Naim, R. and Ismail , A.F. and Saidi, H. Effects of sulfonation process on thermal behavior and microstructure of sulfonated polysulfone membranes as a material for Proton Exchange Membrane (PEM). In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Naim, R. and Ismail , A.F. and Saidi, H. and Saion, E. Development of sulfonated polysulfone membranes as a material for Proton Exchange Membrane (PEM). In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Ng, B. C. and Hasbullah, H. and Ismail, A. F. and Abdul Rahman, W. A. W. (2004) Formation of asymmetric polysulfone flat sheet membrane for gas separation: rheological assessment. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ngah, T.I.S and Nasef, M. M. and Saidi, H. and Dahlan, K. Z. M. Cation exchange membrane by radiation-induced grafting of styrene onto polpypropylene : Effect of grafting conditions. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Ni’am, Moh Faiqun and Othman, Fadil and Sohaili, Johan and Fauzia, Zulfa (2006) Combined magnetic field and electrocoagulation process for suspended solid removal from wastewater. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Nik Sulaiman, N.M. and Ling, C.K. (2004) Membrane Ultrafiltration Of Treated Palm Oil Mill Effluent (POME). In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Nor Aishah Saidina Amin, (2013) Ionic solid nanomaterials: synthesis, characterization and catalytic properties investigation. In: Advanced Materials Research.

Nor Asikin Mohamad Nordin, (2013) Synthesis characterisation and catalytic activity of sol-gel derived silica-mineral acids. In: Advanced Materials Research.

Nor Kamarudin, Khairul Sozana (2012) Removal of carbon dioxide using emulsion liquid membrane containing N-methyldiethanolamine and piperazine in rotating disc contactor. In: Proceedings of the 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), 21-23 November, 2012, Kota Kinabalu, Sabah, Malaysia.

Nordin, Norfaizah (2007) Mineral Content In Mineral Content In Saliva And Its Saliva And Its Relation To Relation To Ovulation Cycle. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Norida, R. and Ismail , A.F. and Rahman, W.A.W.A. (2004) Effect Of Polymer Concentration On Development Of Asymmetric Polyethersulfone Membrane For Gas Separation. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ong, Ai Lien and Chuan Fu, Kian and Harun @ Kamaruddin, Azlina and Bhatia, Subhash (2006) The effect of alcohol on the performance of lipase-immobilized enzymatic membrane reactor for esterification of (R,S)-ketoprofen. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Othman, N. and Goto, M. and Mat, H. (2004) Liquid Membrane Technology For Precious Metals Recovery From Industrial Waste. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Othman, Fadil and Sohaili, Johan and Fauzia, Zulfa and Niam, M. Faiqun (2006) An empirical model for sedimentation of suspended solids under influence of magnetic field. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Othman, N. and Rahmat, A. R. and Hassan, A. and Wahit, M. U. (2005) Effects of Poe And Poe-G-Ma on impact and tensile properties of polyamide nanocomposites. In: Simposium Polimer Kebangsaan Ke-V, 23-24 August 205, Residence Hotel, UNITEN.

Othman , Noraishah and Jaafar, Azwah and Nasrul, Nasasni and Alias, Kamisah (2006) Thermal decomposition of decomposed woods under argon atmosphere. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Othman, Norhayani and Hassan, Azman and Rahmat, Abdul Razak and Wahit, Mat Uzir (2004) Rubber-toughened polyamide 6 / polypropylene nanocomposites: The effect of maleated polyethylene-octene elastomer on the morphological and mechanical properties. In: Malaysian Chemical Congress 2004 (MCC 2004) , 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

Othman, Norhayani and Hassan, Azman and Wahit, Mat Uzir and Rahmat, Abdul Razak (2006) Preliminary studies on maleated polyethylene-octene elastomer modified polyamide 6 / polypropylene (70:30) nanocomposites. In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Ozaki, Hiroaki (2004) Rejection of micropollutants by membrane filtration. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Puwanto, Widodo Wahyu and Muharam, Yuswan (2006) Microreactor for catalytic partial oxidation of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Radzali, Suria Riza (2007) Removal of paraffin deposition using yeast. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Rahaeifard, M. and Then, C. and Wan Mustapha, W. A. and Othman, N .Z. and Sarmidi, Mohd. Roji and Aziz, R. A. and El Enshasy, Hesham (2012) Isolation and optimization of biomass production of trichoderma harzianum : a biological control agent against the palm pathogen ganoderma boninense. In: The 4th. International Conference on Biotechnology for the Wellness Industry (4th. ICBWI), 17 - 18 March , 2012, Bangkok, Thailand.

Rahman, S.A. and Ismail , A.F. and Rahman, W.A.W.A (2004) Formation of cellulose acetate membrane for gas separation from binary dope system: Effect of shear rate. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Raja Ehsan Shah, R.S.S. and Kaka Singh, P.K. (2004) Treatment Of Palm Oil Mill Effluent (POME) Using Membrane Technology. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Rasini, Azreen (2007) Simple Technology Of Starch Hydrolysis By Using Pullulanase Enzyme. In: Bioprocess Engineering PSM Presentation. (Unpublished)

Rasit Ali, Roshafima and Mohd Nor, Hussin and Mohd, Dahlan (2002) Natural Rubber/Polystyrene Segmented Copolymers By Gamma Radiataion Technique: Strutural Characteristic Studies. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Rasit Ali, Roshaflma and Wan Abdul Rahman, Wan Allan (2007) Tapioca starch based biodegradable film : a preliminary study. In: 2007 Conference on Plantation Commodities, 3-4 July 2007, Putra World Trade Centre, Kuala Lumpur, Malaysia.

Rasit Ali, Roshafima and Wan Abdul Rahman, Wan Aizan (2007) Effect of palm oil as processing in biodegradable low density polyethylene (LDPE)/ tapioca starch via blown film technique. In: 7th National Conference on Oil Tree Utilisation: Strategizing for Commercial Exploitation., 13 - 15 November 2007, Bandar Sunway, Selangor.

Rasit Ali, Roshafima and Wan Abdul Rahman , Wan Aizan (2007) Biodegradable low density polyethylene (LDPE)/starch packaging films. In: The International Conference on Advancement of Materials and Nanotechnology 2007,, 29 May-1 Jun 2007, Bayview Hotel, Langkawi. (Submitted)

Rathanak, P. and Muhammad, Ida Idayu and Rahmat, Abdul Razak (2005) Mechanical Properties And Biodegradability Study Of Coconut Shell Powder (Csp) Filled Low Density Polyethylene (Ldpe) Film. In: Simposium Polimer Kebangsaan Ke-V, 23-24 August 205, Residence Hotel, UNITEN.

Razali, Firdausi (2003) Analysis on the recovery yield of the overexpressed ennzyme from 'escherichia coli' from mechanical discruption. In: Scientific Conference of the Electron Microscopy Society Malaysia, 2003, Langkawi, Kedah.

Razali, Mohd. Hasmizam and Ismail, Zuhaimy (2003) CO2 removal in natural gas using hetergeneous catalyst. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ritthipairote, T. and Youravong, W. and Meenun, M. and Wanichapichart, P. Clarification of sugar palm sap usinga pilot scale microfiltration. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Rohah Abdul Majid, (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: Advanced Materials Research.

Rohani, R. and Nasef, Mohamed Mahmoud and Saidi, H. and Dahlan, K. M. Preparation of proton exchange membrane by radiation-induced grafting method : Grafting of styrene onto poly(ethylene tetrafluoroethylene) copolymer films. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Rosali, Mohammad Edziani (2007) Fabrication of Chitosan / Cellulose Acetate Blend Membrane with Use Microwave Technique. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Roslani, Nor Sha'adah (2007) Molecular modeling of chitinase from trichoderma virens. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Sabetian F. J., S. and Bostan, H. and Shamsir Omar, Mohd. Shahir (2012) Mapping the protein interaction between the sperm and oocyte in humans. In: 1st Malaysian Proteomics Conference - Proteomics: from Discovery to Validation, 26-27 September 2012, Penang, Malaysia.

Sahar, Md. Rahim and Noh, Mohamad Z. and Dalib, Salwa and Hussin, Rosli and Ariffin, Ramli (2003) A new cullet-mica ceramic materials. In: International Conference On Recent Advances In Materials, Mineral and Environment, 2003, Penang, Malaysia.

Saidi, Hamdani (2003) Pembangunan pengujian dan peningkatan bagi keupayaan jangka panjang membran pengkonduksi proton. In: Prosiding Seminar Pemantauan IRPA RMK8, Kategori SR/PR dan BTK, 2003, Langkawi, Kedah.

Saidi, Hamdani and Abdul Rachman, Mahyudin (2012) Current technology for synthesis of biodiesel using jatropha oil feedstocks. In: Conference Proceeding (Scopus-Index), 2012.

Saidi, Hamdani and Ismail , Ahmad Fauzi and Aziz, Ramlah Abdul and Aton, Ariffin (1992) Design of pilot plant for separation of CO2 from natural gas using permeation membrane. In: IMSTEC '92 : International Membrane Science and Technology Conference, 10-12 November 1992, University of New South Wales.

Saidina Amin, Nor Aishah and Tan, Eng Fong and Abdul Manan, Zainuddin (2003) Cu modified Cr/CeO2 and Ag/CeO2 catalyst for Nox reduction with propylene. In: Scientific Conference Of The Electron Microscopy Society Malaysia, 2003, Langkawi, Kedah.

Saidina Amin, Nor Aishah and Tung, Chun Yaw (2007) Thermodynamic equilibrium analysis of combined carbon dioxide reforming with partial oxidation of methane to syngas. In: International Journal of Hydrogen Energy, 2007, UPM.

Saiful Irwan, Zubairi and M. R., Sarmidi and R. A., Aziz (2005) Standardization of the bio-active compounds (rotenoids) from the extract of local plant species (derris elliptica) using the internal standard method of high performance liquid chromatography (HPLC). In: Proceeding of KUSTEM 4th Annual Seminar on Sustainability Science and Management, 2nd - 3rd May 2005, Primula Beach Resort, Kuala Terengganu.

Salamatinia, Babak and Zinatizadeh, Ali Akbar and Razali, Noraini and Harun@Kamaruddin, Azlina and Abdullah, Ahmad Zuhairi (2006) Chemical pre-treatments of oil palm frond for improvement in the removal of zn and cu from wastewater by sorption process. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Salleh, Mohd Nazry and Kasim, Farizul Hafiz and Ismail, Khairul Nizar and Ghazali, Che Mohd Ruzaidi and Saad, Saiful Azhar and Daud, Suhardy (2006) Characterization and application of dolomite rock in Perlis. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Samsudin, Sani Amril and Hassan, Azman and Othman, Norhayani (2004) Mechanical Properties of High Impact Polystyrene/ Styrene-Butadiene-Styrene Blends. In: Malaysian Chemical Congress 2004 (MCC 2004) , 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

Samsuri, Ariffin and Junin, R. and Osman, A. M. (2001) The utilization of Malaysian local bentonite as an extender and free water controller in oil-well cement technology. In: SPE Asia Pacific Oil & Gas Conference and Exhibition in Indonesia, Jakarta, Indonesia, 17-19 April 2001., 17 - 19 April 2001, Jakarta, Indonesia.

Samsuri, Ariffin An Integrated Simulation Model for Sand Control Evaluation. In: UNSPECIFIED.

Samsuri, Ariffin Contribution of collapse perforation to the production of loose sand in the wellbore. In: 9th Offshore South East Asia Conference , 1-4 December 1992, Singapore.

Samsuri, Ariffin Pengaruh Perkembangan Sains & Teknologi Terhadap Aktiviti Penterjemahan. In: Persidangan Penterjemahan Antarabangsa ke-6, 2-4 September 1997, Pulau Pinang, Malaysia.

Samsuri, Ariffin Perforated Wellbore Stability. In: Regional Seminar On Coastal & Offshore Engineering, 9-11 December 1991, Kuala Terengganu, Malaysia.

Samsuri, Ariffin Rice Husk Ash Application in Petroleum Industry. In: Malaysian Science & Technology Congress'99, 8-10 November 1999, Kucing, Sarawak, Malaysia.

Samsuri, Ariffin The application of palm oil fly ash in improving a petroleum well cement characteristics. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Samsuri, Ariffin and A. Rahman, M. Azmi Perkembangan Industri Petroleum Dan Sumbangannya Kepada Negara. In: Kongress Sains dan Teknologi Malaysia 1992, Sesi Johor, Seminar Peranan Sains dan Teknologi Dalam Pertumbuhan Industri Johor, Johor.

Samsuri, Ariffin and Abdullah, Habiburrohman (2002) Electrolysis treatment study of Sabah bentonite and its applications in petroleum industry. In: Malaysian Science & Technology Congress 2002, 17 - 19 October 2002, Genting Highlands, Malaysia.

Samsuri, Ariffin and Abdullah, Habiburrohman and Kien Ping, Leyong Preliminary study of local bentonite treatments for oil and gas industry. In: Malaysian Science & Technology Congress 2001, 8-10 October 2001, Melaka.

Samsuri, Ariffin and Amawoty, S.Arumugam and Abd. Shukor, Noriyati Optimum Acid System for Trengganu Offshore Gas Well Acidizing Process. In: Malaysian Science & Technology Congress' 98, 30-31 October 1998, Johor Bharu.

Samsuri, Ariffin and Balasundram, Suresh General Plant Safety in a Textile Factory. In: Malaysian Science & Technology Congress '99, 8-10 November 1999, Kucing, Sarawak, Malaysia.

Samsuri, Ariffin and Chuong, P.V. Minimize sand production by controlling wellbore geometry and flow rate. In: SPE International Oil and Gas Conference and Exhibition in China, Beijing, China, 7-10 November 2000, Beijing, China.

Samsuri, Ariffin and Herianto, Herianto Comparison Of Sandstone Mechanic Properties Using Acoustic Test And Direct Uniaxial Test. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe), 13-14 December 2004, Universiti Teknologi Petronas. (Submitted)

Samsuri, Ariffin and Herianto, Herianto and Setyowiyoto, Jarot Petrophysics Study of Sand Stone Core to the Accuracy of Ultrasonic Pulse Velocity. In: UNSPECIFIED.

Samsuri, Ariffin and Irawan, Sonny (2003) Extraction of montmorillonite mineral iron-oxides with organic acids. In: Proceeding of Indonesian Petroleum Engineering Association (IATMI), ITO, Bandung, October 2003, October 2003, ITB, Bandung, Indonesia.

Samsuri, Ariffin and Irawan, Sonny Mineralogyc and Physico-Chemical Characteristics of Bentonite Clay from Sabah Malaysia. In: UNSPECIFIED.

Samsuri, Ariffin and Johari, Ahmad Shukri Drilling Fluids Based on a Derivative of Malaysian Palm Oil. In: 1993 Asia Pacific Oil & Gas Conference & Exhibition, 22 July 1992.

Samsuri, Ariffin and Junin, Radzuan The Possible Use of Local Bentonite as an Oil Well Cement Additive. In: Malaysian Science & Technology Congress' 98, 30-31 October 1998, Johor Bharu.

Samsuri, Ariffin and Junin, Radzuan and Mohamed Osman, Adil Laboratory investigations on Malaysian local bentonite as a fluid loss agent in oil-well cement slurry. In: Simposium Jurutera Kimia ke-13, 30-31 Oktober 2000, Selangor.

Samsuri, Ariffin and K.S, Surej Rock Mechanics in Petroleum Industries and the Importance to Wellbore Stability. In: Malaysian Sciences & Technology Congress '98, 30-31 October 1998, Johor Bharu.

Samsuri, Ariffin and K.S, Surej and , Zularisam The Effects of Mud Contamination To Wellbore Stability. In: Regional Symposium on Chemical Engineering 1997, 6-8 October 1997, Johor, Malaysia.

Samsuri, Ariffin and K.S, Surej and M.A, Chandra and L.K, Yeoh and B, Suresh Cement Properties Effects To Steel Corrosion Rate. In: UNSPECIFIED.

Samsuri, Ariffin and Kien Ping, Leyong Optimum wet treatment process for upgrading Andrassy and Mansuli bentonite and their applications in petroleum industry. In: Malaysian Science & Technology Congress 2002, 17-19 October 2002, Genting Highlands, Pahang.

Samsuri, Ariffin and Man, Sarimah and Junin, Radzuan and Mohamed Osman, Adil Properties study of a local bentonite as an additive in oil and gas industry. In: AMER 2000, 4-5 October 2000, UiTM, Shah Alam, Selangor.

Samsuri, Ariffin and Mohamed, Zainai Ke Arah Mewujudkan sebuah Universiti Penyelidikan - Satu Cabaran. In: Prosiding Persidangan Kebangsaan Penyelidikan dan Pembangunan IPTA 2001, 25-26 Oktober 2001, Dewan Tun Dr. Ismail, Pusat Dagangan Dunia Putra (PWTC), Kuala Lumper.

Samsuri, Ariffin and Phuong, B. T. N (2002) Cheaper cement formulation for lost circulation control. In: Fourth Biennial Asia Pacific Drilling Technology Conference (APDT 2002), 9-11 September 2002, Jakarta, Indonesia., 9 - 11 September 2002, Jakarta, Indonesia.

Samsuri, Ariffin and S, Surej Kumar and S, Sharin and A, Tzarina and O, Norjusni Borehole Inclination Effects to the Wellbore Stability and Sand Production. In: UNSPECIFIED.

Samsuri, Ariffin and Setyowiyoto, Jarot and B. Nurhandoko, Bagus Endar and Widjanarko, Bambang and , Thurisina Influence of Porosity and Facies of Baturaja Carbonate to the Seismic Wave Velocity: Case Study of Tambun Field West Java. In: Indonesian Petroleum Association 2007.

Samsuri, Ariffin and Shahrudin, Shahrin Kajian Kemungkinan Penggunaan Bahan-bahan Simen Tempatan Di dalam Operasi Penyimenan Telaga Minyak dan Telaga Gas di Malaysia. In: Simposium Sumber Alam Kebangsaan Pertama, 23-26 Julai 1992, UKM Kampus Sabah, Kota Kinabalu.

Samsuri, Ariffin and Shahrudin, Shahrin Locally Produced Blended Cement Suits for Oilwell Cementing Job. In: Kongress Sains & Teknologi Malaysia' 94, 15-18 August 1994, Kuala Lumpur.

Samsuri, Ariffin and Shahrudin, Shahrin Locally Produced Cement as a Possible Alternative for the Oilwell Cement. In: UNSPECIFIED.

Samsuri, Ariffin and Shahrudin, Shahrin Penggunaan Bahan-bahan Tempatan sebagai Bahan Tambah Simen Di dalam Operasi Penyimenan Telaga Minyak dan Telaga Gas di Malaysia. In: Simposium Sumber Alam Kebangsaan Pertama, 23-26 Julai 1992, UKM Kampus Sabah, Kota Kinabalu.

Samsuri, Ariffin and Shahrudin, Shahrin and Suhaimi, Ahmad and Nasir, Abu Samah and Ahmad, Zainuddin The Effect of Adding Palm Oil Fly Ash to the Development of Strength on Oilwell Cement. In: UNSPECIFIED.

Samsuri, Ariffin and Shahrudin, Shahrin and Suhaimi, Ahmad and Nasir, Abu Samah and Ahmad, Zainudin Possibility studies of using local cement in oil and gas wells cementing operation in Malaysia - Part III. In: UNSPECIFIED.

Samsuri, Ariffin and Sim, S. H. and Tan, C. H. (2002) An integrated simulation model for sand production prediction and sand control. In: Malaysian Science & Technology Congress 2002, 17 - 19, October 2002, Genting Highlands, Pahang.

Samsuri, Ariffin and Sim, S.H and Tan, C.H An Integrated Sand Control Method Evaluation. In: IQPC Oil and Gas Conference and Exhibition, 19-22 August 2003, Kuala Lumpur, Malaysia.

Samsuri, Ariffin and Somerville, J.M Perforation stability - Physical and numerical modelling. In: Rock Mechanics as a Multidisciplinary Science Proceedings of the 32nd U.S. Symposium, 10-12 July 1991, The University of Oklahoma.

Samsuri, Ariffin and Soon Hin, Sim (2001) Development of sand production prediction computer model. In: Malaysia Science And Technology Congress 2001, 8-10 November 2001, 8 - 10 November 2001, Universiti Sains Malaysia, Pulau Pinang.

Samsuri, Ariffin and Subbiah, S.K The Influences of Perforation Parameters to Wellbore Instability and Sand Production. In: Proceedings of The Third International Conference on Mechanics of Jointed and Faulted Rock - MJFR - 3, 6-9 April 1998, Vienna, Austria.

Samsuri, Ariffin and Subbiah, Surej Kumar Effects of Mud Contamination To Cement Casing Bonding. In: Petroleum Science, Vietnam Petroleum Institute 1998, Hanoi.

Samsuri, Ariffin and Subbiah, Surej Kumar Effects of Wellbore Stability to Sand Production. In: The Twenty Sixth Annual Convention Indonesian Petroleum Association, 19-21 May 1998, Jakarta, Indonesia.

Samsuri, Ariffin and Subbiah, Surej Kumar Improvement of Blended Cement Characteristics as Possible Alternative for Oil Well Cement. In: Malaysian Science & Technology Congress' 97, 13-14 October 1997, Genting Highlands, Pahang.

Samsuri, Ariffin and Subbiah, Surej Kumar Perforation Parameters Consideration for Stable Petroleum Wellbore. In: Malaysian Science & Technology Congress' 97, 13-14 October 1997, Awana, Genting Highland, Malaysia.

Samsuri, Ariffin and Suhaimi, Ahmad and Sharuddin, Shahrin and , Abu Samah and Ahmad, Zainudin Kesan Penggunaan Abu Kelapa Sawit Sebagai Agen Pengawal Kehilangan Bendalir Di Dalam Operasi Penyimenan Telaga Petroleum. In: Kongress Sains & Teknologi Malaysia' 94, 15-18 August 1994, Kuala Lumpur.

Samsuri, Ariffin and Sukirman, Yahya and Ismail, Raihan Physical Changes Due To A Deforming Porous Media - A Finite Element Solution. In: UNSPECIFIED.

Samsuri, Ariffin and Sukirman, Yahya and Pham Vu, Chuong Effects of Petrographical Rock Properties to the Strength and Behavior of Rock. In: CanCNSM, 16-20 June 1999, Victoria.

Samsuri, Ariffin and Tan, C. H. (2001) Development of a performance evaluation method of mechanical sand retention techniques. In: Malaysia Science And Technology Congress 2001, 8-10 November 2001, 8 - 10 November 2001, Universiti Sains Malaysia, Pulau Pinang.

Samsuri, Ariffin and Irawan, Sonny (2004) A study of iron removal from Sabah montmorillonite by extracting with organic acid. In: Regional Conference for Yonng Chemists 2004, USM, Penang (April 2004), 13-14 April, 2004, USM, Penang, Malaysia.

Samsuri, Ariffin and Junin, Radzuan and Mohamed Osman, Adil (2000) Potential of Malaysian local bentonite applications in an oil-well cement industry. In: Regional Symposium on Chemical Engineering (RSCE 2000) Singapore, 11-13 Dec, 2000, Singapore.

Samsuri, Ariffin and Sim, S.H and Tan, C.H (2003) An Integrated Sand Control Method Evaluation. In: SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, 15-17 April 2003, 15 - 17 April, 2003, Jakarta, Indonesia.

Samsuri, Ariffin and Yeo, Bone Seng (2000) Improved palm oil fly ash as a better oilwell cement additive. In: Malaysian Science & Technology Congress 2000, 16-18 October 2000, Ipoh, Perak.

Sapawe, Norzahir and Abdul Jalil, Aishah and Triwahyono, Sugeng and Jusoh, Rohayu and Che Jusoh, Nurfatehah Wahyuny and Nazirah Kamarudin, Nur Hidayatul and Muhamad Salleh, Nur Fatien and Jaafar, Nur Farhana and Salamun, Nurulhidayah (2012) Electrosynthesis for grown Zno nanoparticles deposited onto HY zeolite with enhanced decolorization of organic dyes. In: The 5th International Conference on Postgraduate Education (ICPE-5 2012), 18-19 December 2012, Universiti Teknologi Malaysia, Johor Bahru.

Sarmidi, Mohamad Roji (2012) Growth stimulatory effect of labisia pumila extract on human skin fibroblast cells (HSF1184) cultured in serum free media. In: 4th International Conference on Biotechnology for the Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21June 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji (2012) The potential of entomopathogenic fungus, beauveria bassiana as a biological control agent against the oil palm major pest, Metisa Plana (Walker). In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Abdul Hamid, Mariani (2007) The effect of feed composition on the silubility of coconut-based non-diary creamer. In: Asean Food Conference, 2007.

Sarmidi, Mohamad Roji and Abdul Hamid, Mariani (2012) The effect of labisia pumilla extract towards UVR-induced keratinocytes. In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Aman Nor, Nor Farahiyah and Mohamed, Muna and Shamsul Annuar, Nur Arbainah and Ngadiran, Sulaiman (2012) The quality factors of non-heated virgin coconut oil (VCO) using the upgraded integrated wet process. In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 June, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Aziz, Ramlan and El Enshasy, Hesham Ali and Abdul Malek, Roslinda and Othman, Nor Zalina (2012) Industrial platform design for yeast probiotic: batch and fed batch cultivation of kluyveromyceslactis in High Density Culture (HCDC). In: 4th International Conference on Biotechnology for the Wellness Industry, 20 - 21 May 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji and Hanapi, Siti Zulaiha and Mat Sarip, Siti Hajar (2012) Determination of pathogen survival in biofertilizers. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji and Law, Jeng Yih (2003) The concentration of sodium salicylate by electrodialysis:transport behaviour. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Sarmidi, Mohamad Roji and Mohamed, Muna (2012) The study of physicochemical properties and sensory evaluation of vanilla ice cream containing virgin coconut oil (VCO). In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohd. Roji and R, Aziz and El Enshasy, Hesham (2012) Isolation and identification of new chitinase-producer strain streptomyces glauciniger wicc A03: an effective biocontrol agent against plants phytopathogen fungi (B2-3). In: The 4th. International Conference on Biotechnology for the Wellness Industry (4th. ICBWI), 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohd. Roji and Zainol, N. A. and Voo, S. C. and Aziz, R. A. (2007) Profiling of centella asiatica (L.) urban extract. In: 2th Asian Chemical Congress , 2007, Kuala Lumpur.

Sarmidi, Mohd. Roji and Zainol, N. A. and Mashudin, M. and Sabri, N. A. and Musa, H. H. and Aziz, R. A. (2007) Prebiotic from tropical fruits. In: 10th Asean food Conference 2007 , 2007, Subang, Selangor.

Sarmidi, Mohd. Roji and Mat Taher, Zarani (2007) Effects on extraction time, temperature and agitation on antioxidant activity of curcuma xanthorrizza. In: 10th Asean Food Conference, 21-23 August 2007, Subang, Selangor.

Saufi, S. M. and Ismail, A. F. and Abdullah, M. S. Polyacrylonitrile (PAN)-based carbon hollow fiber membrane for O2/N2 gas separation. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Sayid Abdullah, Sh. Husna Ajlia (2007) Optimization Of Papain-Based Wound Cleanser. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Sazali, Noor Emmiey Safieza (2007) Effect of pretreatment on decolorization of cashew leaves extracts. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Selamat, Siti Norina and Muhamad, Ida Idayu and Sarmidi, Mohamad Roji (2009) Encapsulation of tocopherol and tocotrienol in vitamin-e using spray drying technique. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Seng, T.B. and Mat, Hanapi and Othman, Norasikin (1998) Selective extraction of silver from the semiconductor wastes. In: Simposium Kimia Analisis Kebangsaan ke Sebelas, 6-7 Oktober, 1988, Fakulti Sains, Universiti Teknologi Malaysia.

Shahi, Sushil K. and Mamta, Patra Shahi (2006) Broad spectrum herbal therapy against superficial fungal infections. In: 1st International Conference on Natural Resources Engineering & Technology, 24-25th July, Putrajaya, Malaysia.

Shahir, Shafinaz and Ahmad, Wan Azlina and Ibrahim, Zaharah (1996) Bioleaching:An Emerging Technology for the Malaysian Gold Mining Industry. In: Proceedings of the 8th National Biotechnology Seminar, 25-27 November 1996, Johor Bahru.

Shahrir Hashim, (2013) Preparation and possible agricultural applications of polymer hydrogel composite as soil conditioner. In: Advanced Materials Research.

Sheikh Ali, Sheikh Imranuddin (2012) Development of bio insect-repellents using citronella, vinegar and triglycerides for commercial application. In: 4th. International Conference on Biotechnology for the Wellness Industry, 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Shou, L. and Chung, T. S. and Wensley, G. (2004) Tuning the gas transport performance of carbon molecular sieve membranes by the morphological changes of 6FDA/PMDA-TMMDA precursors. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Siang-Piao, Chai and Sharif Zein and , Sharif Hussein and Mohamed, Abdul Rahman (2006) The production of cox-free hydrogen and carbon nanofibers from direct catalytic decomposition of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Songip, Abdul Rahman (2003) Development of on-board autothermal fuel processor from natural. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Songip, Abdul Rahman and Zuber, Zeti Faralin (2003) Preparation and characterization of rolled thin Pd-Ag, Pd-Cu and stanum alloy membranes for hydrogen separation. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Sonny Irawan, Sonny Irawan and Samsuri, Ariffin (2007) Drilling mud material cost saving through utilization of treated Malaysian local bentonite. In: Proceedings of SIMPOMIN 2007 (Mineral Symposium 2007), 4-6th September 2007, Orient Star Resort, Lumut, Perak.

Sugeng Triwahyono, (2012) Electrosynthesis of ZR-ZN-FE/HY composite catalyst for carbon dioxide hydrogenation to ISO-alkanes. In: 2nd ITB Catalysis Symposium.

Suhaina, M.I. and Ismail , A.F. and Nasri, N.S. Performance evaluation of polysulfone hollow fiber membrane for oxygen enrichment system. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Suleiman, Norhidayah (2007) Dietary Fiber Source From Pineapple By-Product. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Syamsu, Khaswar and M. Fauzi, Anas and Hartoto, Liesbetini and Ani Suryani, Ani Suryani and Nur Atifah, Nur Atifah (2006) Production of Pha (poly hydroxy alkanoates) by Ralstonia eutropha on hydrolysed sago starch as main substrate using fed-batch cultivation method. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Syed Latiff, Syed Apendi and Songip, Ahmad Rahman (2003) Magnetron sputtering film deposition of porous and dense membran hydrogen recovery. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Syed Muhammad, Syed Anuar Faua'ad and Patricia, Tang and Hak-Kim , Chan and Dehghani, Fariba (2012) Potential technique for the production of micronised lactose crystals by supercritical fluid conditioning. In: ISSF 2012: 10th International Symposium on Supercritical Fluids, 13-16 May, 2012, San Francisco, USA.

Tacharatanamanee, R. and Cherdrungsi, K. and Youravong, W. (2004) Fractionation Of Proteins In Surimi Wastewater Using Membrane Filtration. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Taib, Mohamad Rozainee and Mohd. Yusoff, Mohd. Rashid and Abdullah, Abdul Hamid and Abdul Rahman, Mohd. Yaccob Khan (1990) A survey of the current industrial pollution problems : A perspective for chemical engineers. In: Symposium Of Chemical Engineers Malaysia, June 1990, UTM Kuala Lumpur.

Tajuddin, R.M. and Ismail , A.F. and Salim, M.R. (2004) A Study On The Performance And Morphology Of Multicomponents Hollow Fiber Ultrafiltration Membrane. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Tajuddin, R. M. and Ismail, A. F. and Salim, M. R. (2004) Effects of oxygen concentration on microbial growth in aerated palm oil mill effluent using oxygen enriched air membrane system. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Tan, J. and T., Mohd Rozainee and A. A., Ramlan and A. H., Mohd. Ariffin (2006) Chemical precipitation of palm oil mill effluent (POME). In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Tan, Tian Swee and Shaikh Salleh, Sheikh Hussain and Arif, Ahmad Kamarul and Cheng, Wei Lip and Lau, Chee Yong (2012) Malay speech digit recognition for speech therapy application. In: Progress In Electromagnetics Research Symposium, 27-30 March 2012, Kuala Lumpur, Malaysia.

Tin, P.S and Chung, T.S and Dai, Y. and Guiver, M.D. Novelapproaches to fabricate carbon membranes based on chemical modified and solvent treated polymides. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Tokuda, Masao (2006) Efficient fixation of carbon dioxide by electrolysis - Facile synthesis of useful carboxylic acids. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Triwahyono, S. and Sarmidi, M. R. and Aziz, R. A. and Kanno, T. and Kobayashi, M. Partial oxidation of propylene by using cesium-silver immobilized ceramic-membrane reactor. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Triwahyono, Sugeng and Abdul Jalil, Aishah and Hattori, Hideshi (2007) Influence of Wo3 on the properties Of WO3-ZrO2 solid acid catalyst. In: International Conference On Advancement Material And Nanotechnology, 2007, Langkawi.

Tuan Abdullah, Tuan Amran and Ahmad, Arshad (2012) Modeling of a biomass (Imperata Cylindrica) fast pyrolysis in a modified fixed bed reactor. In: Conference on Emerging Energy & Process Technology (CONCEPT 2012), 2012.

Tuan Abdullah, Tuan Amran and Johari, Anwar and Ahmad, Arshad (2012) Design of a bubbling fluidized bed gasifier for the gasification of palm waste. In: Conference Energy & Process Technology (CONCEPT 2012), 2012.

W. A. R., Wan Aizan and R. A., Roshafima and Rose J., Emiliana (2009) Characterization of acrylonitrile grafted onto pineapple leaf fibers using hydrogen peroxide as an initiator. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Wahab, M. F. A and Rahim, R. A. and Ismail , A.F. (2004) Latest development of mixed matrix membrane using glassy polymer as continuous phase for gas separation. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Wahit, Mat Uzir and Hassan, Azman (2012) Study on the mechanical properties of recycled poly (ethylene terephtalate) reinforced date palm fiber composite. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Wahit, Mat Uzir and Hassan, Azman and Koay, Yee Farn and Othman, Norhayani and Mokhtar, Munirah (2006) Toughening Polyamide 6 Nanocomposites With Maleic Anhydride Grafted Polyethylene Octene. In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Wan Abdul Rahman, Wan Aizan and A. Majid, Rohah (2012) Effect of different solvents on the thermal, IR spectroscopy and morphological properties of solution casted PLA/starch films. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 10 - 13 December 2012, Johor, Malaysia.

Wan Abdul Rahman, Wan Aizan and A. Majid, Rohah (2012) The effect of mercerization process on the structural and morphological properties of pineapple leaf fiber (PALF) pulp. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 10-13 December, 2012, Johor Bahru, Johor.

Wan Abdul Rahman, Wan Aizan and Andenan, Nurnadia (2007) Development of polyethylene/rice straw composite for construction application via injection molding technique. In: VIIth National Symposium On Polymeric Materials 2007, 2007, UniKL City Campus.

Wan Abdul Rahman, Wan Aizan and Yunos, Muhammad Zaini (2007) Biodegradable of tissue waste/high density polyehtylene/starch formulation for thermoforming process: effect of starch. In: VIIth National Symposium On Polymeric Materials 2007, 2007, UniKL City Campus.

Wan Abdul Rahman , Wan Aizan and Rasit Ali, Roshafima and Zakaria, Naterah (2006) Studies on biodegradability, morphology and mechanical properties of low density polyehtylene/sago based blends. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Wan Ahmad, Wan Haslinda and Abdul Karim, Norsuhada and Ahmad, Wan Azlina and Zakaria, Zainul Akmar (2012) Cr(VI) reduction by acinetobacter haemolyticus in rich and agricultural waste medium & rsquo. In: The Fifth Annual Conference On The Challenges In Environmental Science And Engineering-CESE 2012, 9 – 13 September 2012, Melbourne, Australia.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin Benchmarking Water Utilisation Using Minimum Water Network. In: SOMChe 2006, 19-20 December 2006, UiTM, Shah Alam.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2006) A systematic technique for design of minimum water network. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Ujang, Zaini Efficient water demand management for urban systems based on pinch analysis. In: SOMChe 2004, UTP, Perak.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Ujang, Zaini Systematic technique for water minimisation in urban water system using water pinch analysis. In: Asia Water 2004.

Wan Jaafar, Wan Mohammad Kamal and A. Manan, Muhammad and Idris, Ahmad Kamal and Junin, Radzuan and Ismail, Norhisyam and Nik Daud, Nik Muhammad Azhar and Arshad, Mohd. Amirrul (2009) Application of lignin from coconut fiber in surfactant formulation. In: 23rd Symposium of Malaysian Chemical Engineers & 3rd International Conference on Chemical and Bioprocess Engineering (SOMCHE-ICCBPE-2009) , 2009, Sutera Harbour Golf Resort, K.Kinabalu, Sabah.

Wan Nik, W. B. and Ani, F. N. and Masjuki, H. H. (2006) Rheology of environmental friendly hydraulic fluid: effect of aging period, temperature and shear. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Wan Nik, W. B. and Rahman, M. M. and Yusof, A. M. and Ani, F. N. and Che Adnan, C. M. (2006) Production of activated carbon from palm oil shell waste and its adsorption characteristics. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Wan Sulaiman, Wan Rosli and Md. Kasmani, Rafiziana (2012) Explosibility and physical characteristics of Philippine coal dust. In: 26th Symposium of Malaysian Chemical Engineers (Somche-2012) in Conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 November 2012, Kota Kinabalu, Sabah, Malaysia.

Wani, Eddie (2007) Effect of normalization and effect of normalization and training algorithm on radial basis training algorithm on radial basis function network performance function network performance. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Wijanarko, Anondho and Wulan, Pembangun Dyah Kencana Praswasti and Chandra, Willy and Dianursanti, Dianursanti and Song, Seung Koo and Sudibandriyo, Mahmud and Gozan, Misri (2006) Adsorption of alkyl benzene sulfonate surfactant on activated carbon for biobarrier purpose. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Wong, Chuan Chin and Ani, Farid Nasir and Mohd. Nor, Hussin (2003) Quantification of Extracted Pyrolysis Oil from Oil Palm Shells. In: Proceedings of International Conference on Chemical and Bioprocess Engineering, 2003, Kota Kinabalu, Sabah.

Wulan, Praswasti PDK and Gozan, Misri and W, Anondho and Dianursanti, Dianursanti and S, Mahmud (2006) Biodegradation of Linear Alkyl Benzene Sulfonate by bacterial consortium. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Y., Yuliusman and Mat, Hanapi and Othman, Norasikin (1998) Liquid-liquid extraction of silver from silver nitrate solution and photograhic waste - exractant selectivity and capacity. In: Simposium Kimia Analisis Kebangsaan ke Sebelas, 6-7 Oktober 1998, UTM Skudai.

Yaacob, N. and Ismail , A.F. (2004) Polysulfone hollow fiber membrane system for CO2/CH4 separation: Influence membrane module configuration on the separation performance. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Yaacob, Muhammad Akmal (2007) The Effect Of Impeller Configurations In Sparged And Agitated Bioreactor On Mixing Time. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Yaakob, Z. and Yosfiah, M. R. and Minggu, L.J. and Ibrahim, M.A. and Daud, W.R.W. (2006) Effects of Ni and Pd metals catalyst on Gamma Alumina support. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Yen, Swee Kuan and Wan Abu Bakar, Wan Azelee and Buang, Nor Aziah (2003) Catalytic activity, structural and morphological assessment of cobalt-praseodyium oxide based catalyst. In: Persidangan Sempena Pameran Penyelidikan dan Pembangunan IPTA, 2003, Kuala Lumpur.

Yeoh, Judy (2007) EFFECT OF STARCH AND PULLULANASE CONCENTRATION ON γ-CD PRODUCTION. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Yunus, Robiah and P.Y., Chang and L.H., Lee and Azhari, Azhari (2006) Preliminary study on extraction and synthesis of biodiesel from jatropha curcas seeds and soybean. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Z., Salman and C. Y., Mohd Azizi and N. A., Nik Norulaini and A. K., Mohd Omar (2006) Gas chromatography/time-of-flight mass spectrometry for identification of compounds from parkia speciosa seeds extracted by Supercritical Carbon Dioxide. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Zainal Alam, Muhd. Nazrul Hisham and Schäpper, Daniel and Gernaey, Krist V. (2012) Establishment of a gaseous pH cont rol concept in microbioreactors. In: 2012 International Conference on Environment, Energy and Biotechnology, 5th - 6th May 2012 , Kuala Lumpur, Malaysia.

Zainura Zainon Noor, (2013) Assessing sustainable municipal solid waste management factors for Johor-Bahru by analytical hierarchy process. In: Advanced Materials Research.

Zakaria, Zainal (2012) LPG off take rates: the influence of its filling weights. In: 4th Brunei International Conference in Engineering and Technology, BICET 2012, 25-26 Januari 2012, Bandar Seri Begawan, Brunei Darussalam.

Zaki, Nurul Asyikin Md and A Darim, Rosmaria and Md Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of Osmotic Dehydration Parameters on Papain Enzyme Activity of Carica papaya L. In: 4th Food Science and Technology Seminar 2005, 23rd July 2005, Universiti Sain, 23 July 2005, USM Penang.

Zeb Shah, Jehan and Salim, Naomie (2006) Neural networks and support vector machines based bio-activity classification. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Zubairi, Saiful Irwan and Sarmidi, M. R. and Aziz, R. A. and Latip, R. and Said, J. (2004) The effect of rotenone crude extract from derris elliptica on the larvicidal activity (mortality) of mosquito. In: Proceeding of Symposium Biologi Kebangsaan ke-7, 18-20 May 2004, Awana Genting Highlands, Pahang.

Zubairi, Saiful Irwan and Sarmidi, M. R. and Aziz, R. A. and Ramli, M. K. A. and Latip, R. (2004) Evaluation of kinetic for the extraction of bio-active compound (rotenone) from derris elliptica and identification of optimum variables of the exhaustive extraction process. In: Proceeding of Agriculture Congress, 4-7 October 2004, The Mines & Hotel Resort, Kuala Lumpur.

Zubairi, Saiful Irwan and Sarmidi, M. R. and Aziz, R. A. and Ramli, M. K. A. and Latip, R. and Nordin, N. I. A. (2004) Determination of suitable co-precipitator (clarifying agents) for identifying the presence of rotenone from Derris elliptica. In: Proceeding of Simposium Kimia Analisis Kebangsaan (SKAM-17), 26-28 August 2004, Swiss Garden Resort, Pahang.

Zubairi, Saiful Irwan and Sarmidi, M. R. and Aziz, R. A. and Ramli, M. K. A. and Latip, R. and Nordin, N. I. A. (2004) Normal soaking extraction (NSE) of rotenone from Derris elliptica. In: Proceeding of Simposium Kimia Analisis Kebangsaan (SKAM-17), 26-28 August 2004, Swiss Garden Resort, Pahang.

Zubairi, Saiful Irwan and Sarmidi, M. R. and Aziz, R. A. and Ramli, M. K. A. and Latip, R. and Nordin, N. I. A. (2004) Purification and identification of rotenone from derris elliptica by using the vacuum liquid chromatography-thin layer chromatography (VLC-TLC) method. In: Proceeding of Simposium Kimia Analisis Kebangsaan (SKAM-17), 26-28 August 2004, Swiss Garden Resort, Pahang.

Zubir, N. A. and Ismail, A. F. and Nasef, M. M. and Dahlan, K. Z. M. (2004) Physico-chemical study of sulfonated polystyrene pore-filled electrolyte membranes by electrons induced grafting. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Zubir, N. A. and Ismail, A. F. and Nasef, M. M. and Dahlan, K. Z. M. and Saidi, H. (2004) Sulfonated Polystyrene Pore-Filled Electrolytes Membranes By Electrons Induced Grafting Of Styrene Into PTFE Films : Thermal Stability And Structural Investigation. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Zulfikar, M. A. and Mohammad, A. W. (2004) Synthesis and characterization of poly(methylmethacrylate)/SiO2 hybrid membrane. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Zulkipeli, Nur Lina (2007) Screening For High Bromelain Content In Different Species Of Pineapple In Malaysia. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Book

Samsuri, Ariffin and Hussin, Aziz and Idris, Ahmad Kamal (1988) Kamus Istilah Kejuruteraan Petroleum : Peringkat Pengajian Tinggi. Dewan Bahasa dan Pustaka, Kuala Lumpur. ISBN 9789836205810

Thesis

Panahi, Pouye (2013) Biodiesel production from Jatropha curcas seed in batch reactor using microwave catalyzed by zeolite catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

A. Ahmed Al-Dulaimi, Ahmed (2010) Evaluation of polyaniline composites and nanostructures as anti-corrosive pigments for carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

A. Manan, Muhammad (2006) Microscopic study of emulsion flow in porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

A.Rahman, Azura Hanis and Azman, Hassan (2007) The mechanical properties ofacrylonitrile-butadiene-styrene (abs) / nylon 6 / talc composites. Other thesis, Universiti Teknologi Malaysia.

Ab. Aziz, Muhammad Arif (2011) Preparation of platinum and nanosized nickel promoted HY zeolite for isomerization of n-pentane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Karim, Rozaliana (2015) Biochemical and morphological changes of UVB-Irradiated human skin fibroblast (HSF1184) cells on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Rahim , Reehan Adne (2007) Development and characterization of polyethersulfone blends with polyimide mixed matrix membrane for oxygen and nitrogen gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abang Mahmod, Dayang Salyani (2011) Preparation and characterization of polyacrylonitrile fiber precusor using multi-hole spinneret. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abba, Ahmad Halilu (2009) Catalytic ozonation of pharmaceuticals using activated carbon-metal loaded catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abbasi, Mohammad Reza (2013) A mathematical model for water and energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Elhameed, Ahmed Bakheit Ahmed (2013) Production of biodiesel from jatropha oil by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Ghani, Amsal (2013) Lignin biodegradation by thermomyces lanuginosus EFB2 and aspergillus flavus EFB4 co-culture and pure culture in solid state fermentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abd. Hamid, Hazirah (2015) Combination of low pressure steam heating and dilute acid pretreatment of palm biomass for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Hamid, Mohd. Kamaruddin (2004) Multiple faults detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abd. Hamid, Nur Atiqah (2011) Polysulfone-titanium dioxide ultrafiltration membrane with enhanced fouling resistance for humic acid removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Jalil, Muhammad Fauzi (2014) In vitro lipid activity of eurycoma longifolia jack extracts loaded liposome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahim, Hazwan Faiz (2012) Methanation of simulated natural gas using alumina supported managanese doped ruthenium and palladium oxide catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahman, Nur Syuhada (2012) Solubility model of palm oil extraction from palm fruit using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Nurulaini (2014) Identification of protein from Eurycoma Longifolia root extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Roshanida (2001) Siklodekstrin glukanotransferase (CGTase) daripada 'Bacillus Stearothermophilus' HR1 : pencirian separa dan pengoptimuman media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Sharifah Fahsuhaizam (2012) The physical properties and direct current conductivity of titanium (IV) dioxide ceramic doped lithium (II) nickel dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahman, Sunarti (2004) Development of defect-free and hyperthin-skinned of asymmetric cellulose acetate membrane from binary dope system for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Aziz, Nur Azmyra (2015) Mechanical, thermal and characterization of chitosan, nano precipitated calcium carbonate single and hybrid filler/ poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Gani, Madihah (2011) In vitro inhibition of human ovarian and colon cancer cell lines using crude bromelain in Ananas comosus juice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Ghani, Siti Waqina (2014) Characterization of chitosan/montmorillonite hybrid filled tapioca starch nanocomposite films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Halim, Khairul Azhar (2013) Renewable resources polyol as chain extenders for waterborne polyurethane dispersion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Halim Yun, Hafizah (2013) Hydrogen production from glycerol using copper and nickel loaded zeolite based catalyst. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Hamid, Mariani (2007) The effect of feed composition on the solubility and dispersibility of coconut-based non-dairy creamer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Karim, Azila (2004) Re-refining of base oil from spent lubricant : a comparative study between laboratory and pilot scale study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Karim, Siti Kartina (2006) Effect of temperature and hydrogen on palm oil cracking over MCM-41/ZSM-5 composite catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Latiff, Norliza (2015) Fractionation and characterization of polyphenols rich extract from labisia pumila leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Mudalip, Siti Kholijah (2007) Effects of ultrasonic waves on vapor-liquid equilibrium of normal binary and azeotropic mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Rahman, Azmil (2006) Simulation and optimization of methanol autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Abdul Wahab Baqr, Rebaz (2013) Studies to investigate the effects of nitrogen sources on androgenesis and carbon sources on shoot regeneration of aroma and non-aromatic types in indica rice (Oryza Sativa L). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdullah, Alwthinani Sarhan (2011) Effect of pani/epoxy on the corrosion resistance of 304 stainless steel and BS 1387 carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mohd Shahir (2006) Simulation and Optimization of Butane Autothermal Reformer for Fuel Cell Applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Abel, Stashia Eleaness Roland (2013) The extraction of essential oil from Quercus Infectoria galls using supercritical carbon dioxide pressure swing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu Bakar, Aznizam (2006) Mechanical, thermal and processing properties of oil palm empty fruit bunch-filled impact modified unplasticised poly (vinyl chloride) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Ghalia, Mustafa A. (2011) Mechanical, rheological, and thermal properties of calcium carbonate filled polypropylene / linear low density polyethylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Hassan, Muhd. Hafiz and Wan Abdul Rahman , Wan Aizan (2007) Palm leaves reinforced calcium carbonate/adhesive/polyaluminium chloride as a potential roofing material. Other thesis, Universiti Teknologi Malaysia.

Abu Samah, Khamisah (2012) Physical and mechanical properties of clay recycle glass-paper ceramic by slip casting technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Adam, Muhamad Syafiq (2006) Simulation and optimization of ethanol autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Adam, Siti Hazirah (2011) Removal of cationic, anionic and non-ionic dyes from aqueous solutions using Durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Adnan, Noorazlina (2009) Flame retardancy and mechanical properties of poegmah compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Affandi, Iezzat Emeer (2014) Oil and grease treatment using indigenous bacterial biofilm system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Aimi Ana (2011) Treatment of palm oil mill effluent using oil palm fiber filter media enriched with chitosan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Anisa (1998) Biotransformation of 6-amninopenicillanic acid and 7-aminodesacetoxycephalosporanic acid to ampicillin and cephalexin in batch stirred tank reactor and recirculated packed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Kamarudin (2004) Improvement of a tropical residual soil by electrokinetic process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Siti Nur Sakinah (2009) Study of stepped lap repairs for composite materials applicable to sheet moulding compound water tank panels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ahmad Kamal, Qistina (2013) Production of itaconic acid from palm oil mill effluent (POME) using Aspergillus Terreus nrrl 1960 immobilized in PVA-alginate sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Pauzi, Safwan (2011) A cullet-kaolin ceramic from recycle glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed, Amal Gasim (1998) Flavour volatile constituents and the roasting of selected spices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed, Israil (1998) Innovative technique of separating commingled thermoplastics to enhance materials recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akbari, Saeed (2011) Estimating Asphaltene precipitation in the presence of co2 injection in oil reservoirs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akbarivakilabadi, Abozar (2010) Effect of epoxidized natural rubber on mechanical, thermal and morphological properties of polylactid/talc composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Al-Haddad, Ahmad Yaser (2013) Development of multiplexed microcontroller based system for microbioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al-Jumaily, Amer Ali Saoud (1999) Hydrogen absorption and desorption characteristics of ferro titanium manganese alloy as hydrogen storage media using new metal hydride test system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali @ Mahmud, Asmadi (2000) Direct conversion of methane to liquid hydrocarbons over Ga-HZSM-5 zeolite catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali Hosseinnia, (2014) Simultaneous azo dye degradation and biohydrogen production by strain L17 form gastrointestinal origin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Ali Mohsin, Mohammed Ehtesham (2014) Influence of montmorillonite as secondary filler on the properties of carbon nanotube / high density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Alias, Nadiawati (2007) Cloning and expression of endochitinase gene from trichoderma virens UKM-1 IN Escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Aly Ibrahim, Amgad Ahmed (2012) Proton conducting membrane by radiation-induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoro ethylene) film and phosphoric acid doping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aman Nor, Nor Farahiyah (2015) Influence of churning and thawing temperatures on yield and quality of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amin Elfagaih, Fawzi Mohamed (2008) Catalytic reforming of n-octane and heavy naphtha fraction over tri-metallic modified catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ammasi, Sriraj (2005) Dual bed catalytic reactor system for direct conversion of methane to liquid hydrocarbons. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Anam Norddin, Muhd. Noorul (2002) A study on the effect of coil insertion system on the evaporation of LPG from commercial storage cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Andenan, Nurnadia (2010) Injection molded silane crosslinkable rice straw/high density polyethlene biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ang, Boo Chung (2000) Synthesis and characterization of MCM-41 and use as a catalyst in friedel-crafts reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Anggoro, Didi Dwi (1998) Modification and characterization of HZSM-5 zeolite loaded with transition metal catalysts for single step conversion of methane to gasoline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Anis Farhan Kamaruzaman, (2014) A levy flight particle swarm optimizer for machining performances optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Anjura, Cosmas (2006) Simulation and optimization of hydrogen production from autothermal reforming of ethane for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Anuar, Aisyah (2011) Effect of encapsulation on physicochemical properties and retention of pineapple flavour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Arif, Khatijah (2011) Size reduction of nanoparticles using microwave method for photo degradation of dye. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Arsad, Agus (2010) Compatibiliser effects on properties of polyamide-6/acrylonitrile-butadiene-styrene and polyamide-6/acrylonitrile-butadiene-styrene/short glass fibrethermoplastic composite. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Asgharzadehahmadi, Seyed Ali (2012) Synthesis and characterization of polyacrylamide based hydrogel containing magnesium oxide nanoparticles for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Attaran, Seyed Ahmad (2015) Tensile, barrier, and degradation properties of low density polyethylene/epoxidized natural rubber nanocomposite films. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Awang, Nuha (2013) Synthesis of metals stearate and thermal degradation study of polystyrene metals stearate blends. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aziz, Farhana (2010) Preparation and characterization of Para-Phenylenediamine cross-linked polyimide membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Aziz, Farhana (2006) Simulation and Optimization of Gasoline Autothermal Reformer for Fuel Cell Applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Azman, Nur Aifaa (2006) Optimization of jet fuel autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Baharulrazi, Norfhairna (2009) Mechanical properties of benzoylated oil palm empty fruit bunch short fiber filled impact modified poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Baharulrazi, Norfhairna (2007) Mechanical properties of benzoylated oil palm empty fruit bunch short fiber reinforced poly(vinyl chloride) composites. EngD thesis, Universiti Teknologi Malaysia.

Bahram Barati, (2013) Simulating mutational effects on thermal stability of cellubiohydrolys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Balakrishnan, Harintharavimal (2010) Mechanical, thermal and morphological properties of montmorillonite filled linear low density polyethylene-toughened polylactic acid nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Bashir Ghouse, Mohammed Shariff (2014) Parallel computing for simulating nanoscale temperature behaviour on laser glass interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bazmi, Aqeel Ahmed (2013) Superstructure optimization and forecasting of decentralized energy generation based on palm oil biomass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Beden, Mazin Abdulhussein (2015) Adsorption and stripping of ethanol from aqueous solution using sepabeads207 adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bee, Soo Tueen (2009) Mechanical properties and processability of hybrid talc and calcium carbonate filled polyvinyl chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Bidsorkhi, Hossein Cheraghi (2013) Effect of sepiolite content on mechanical, thermal and flammability properties of ethylene vinyl acetate nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bufares, Ahmed M. (2011) Flashback and quenching of laminar premixed flame on rotating burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Busairi, Abdullah Moch (2002) Lactic acid fermentation of pineapple wastes by lactobacillus delbrueckii. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan, Kian Hwa (2015) Fabrication of polyethersulfone membrane by polyethyleneglycol coated cobalt-doped iron oxide for copper (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan, Mieow Kee (2011) Haemodialysis cellulose acetate-monosodium glutamate membrane obtained from dopes prepared by microwave dissolution technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chang, Hui Quin (2012) Preparation of water-in-oil-in-water emulsions by repeated premix cellulose acetate membrane emulsification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Charlie, Agnese Jati (2011) Optimization of pretreatment and enzymatic hydrolysis of empty fruit bunch for xylose production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Che Jusoh, Nurfatehah Wahyuny (2015) Electrosynthesis of zinc oxide-copper oxide supported on mesostructured silica nanoparticles for photocatalytic decolorization of methyl orange. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Mohamad, Fatimah Zaharah (2007) Performance of recycled high density polyethylene (HDPE)/ rice husk composite injection grade in thermoforming process. Other thesis, Universiti Teknologi Malaysia.

Che Pa, Nasrul Fikry (2008) Synthesis and characterization of polydimethylsiloxane blended polystyrene interpenetrating polymer network membrane for pervaporationof ethanol and water mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chee, Chit Lai (2007) Optimization of pullulanase production from Exiguobacterium sp. MAAC-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chen, Siew Chin (2015) Optimization of formulation and process condition for downsizing of labisia pumila and ficus deltoidea loaded niosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chen, Wah Sit (2005) Application of artificial neural network – genetic algorithm in inferential estimation and control of a distillation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chen, Xiao Long (2014) Extraction of squalene from palm oil mesocarp using supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, Boon Chong (2001) Concentration and purification of citric acid using electrodialysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, Kew Hong (2015) Improved total site heat integration incorporating pressure drop and process modifications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, Kok Cheong (2000) Processing, microstructure and mechanical properties of cast aluminium-based metal matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chew, Sau Yen (2004) Mechanical and flammability properties of ABS/PVC blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chew, Yin Hoon (2007) External mass transfer model for the hydrolysis of palm olein using immobilized lipase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chezghani, Mohsen (2012) A graphical method for simultaneous targeting and design of multiple utility systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chien, Cassendra Bong Phun (2015) Effective microorganisms on organic matter with carbon and nitrogen mineralisation for empty fruit bunches composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chik, Ahmad Sabri (2004) The behavior of a batch and a continuous deodoriser for the deodorisation of Malaysian cocoa butter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chin, Hon Keong (2002) Carbon dioxide reforming of methane : the effect of metal, support, temperature and reactant ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ching, Kuan Yong (2008) Nickel oxide based catalysts for the simultaneous reactions of methanation and desulfurization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ching, Yern Chee (2001) Mechanical and morphological properties of impact modified PP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chong, Chee Ming (2005) The selective catalytic reduction of nitric oxide by propylene over bimetallic CeO2-ZrO2 supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Choong, Thomas Shean Yaw (1995) Modeling and simulation of gas separation using membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chua, Lee Suan (2005) Chiral resolution of (R,S)-1-phenylethanol using immobilized lipases in batch stirred tank and recirculated packed bed reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chua, Lee Suan (1999) Synthesis of lauric acid ester using immobilized enzyme lipase in a recirculated packed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuah, Gary Yong Wei (2000) The effects of operating conditions to the extraction performance of composite solvent in the recycling of used lubricant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuah, Wei Sze (2013) Segregated problem table algorithm for simultaneous targeting and design of integrated energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dailin, Daniel Joe (2010) Optimization for the production of kefiran using lactobacillus kefiranofaceins in a bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Daneshfar, Aref (2014) The study of pH, temperature, reusability, and storage stabilty of urease immobilized on electrospun polyacrylonitrile mat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Danlami, Jibrin Mohammed (2015) Supercritical carbon dioxide extraction of castor oil seed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dastan, Mohammadreza (2014) Photocatalytic reduction of carbon dioxide and methane to light hydrocarbons over nitrogen doped titanium dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, Noorol Jannah (2012) Carbon footprint calculator for a typical campus in Malaysia using life cycle assessment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, Suhardy (2002) Penentuan ringkas kandungan minyak dalam buah kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Devanai, Kannan (2012) Modification of polyethersulfone incorporated with polyvinylpyrrolidone - iodine via phase inversion and ultraviolet photo grafting for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Din, Abdul Talib (1999) Kesan penggunaan enzim ke atas kualiti efluen loji rawatan kumbahan dan air sisa kilang kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

El-Sayed Nasef, Mohamed Mahmoud (1996) Separation of CO2 from CO2/CH4 mixtures using hollow fiber membrane permeator : characterization of permeation performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Elraies, Khaled Abdalla (2007) Evaluation of improving oil recovery in WAHA reservoir by waterflooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Eng, Wee Ean (2008) Pretreatment of instant coffee wastewater by coagulation and flocculation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ezzatzatzadegan, Leila (2011) Neuro fuzzy modeling of propylene polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Fadli, Siti Norhanum (2007) Simulation and optimization of diesel autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Fathaddin, Muhammad Taufiq (2006) The application of lattice gas automata for simulating polymer injection porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Fathi Jasni, M. Jasmin (2012) Catalytic oxidative desulfurization of diesel fuel utilizing alumina supported cobalt manganese oxides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Fauzi, Roslinda (2009) Synthesis of palm oil-based polyol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Foo, Chwan Yee (2002) Synthesis of mass exhange network for batch process system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Galadima, Ahmed Ibrahim (2013) Optimization of biobutanol production by clostridium species upm-a1 with liquid central composite design (ccd). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ghassemi, Payman (2011) Phosphoric acid membrane by radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetrafluoro ethylene) film followed by phosphorylation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Goh, Kian Mau (2008) Protein engineering and reaction manipulations of recombinant cyclodextrin glucanotransferase G1 for improvement of product specificity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Goh, Meng Seng (2009) Production of surfactant from oil palm shell for enchanced oil recovery processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hadi, Ahmad Maki (2013) Isolation and biodegradation of 3-chloropropionic acid by aspergillus aculeatinus strain M1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hadiwinoto, Dewi Dwirianti (2002) Membrane bioreactor for treatment of high-sulfate wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hafifi Abdullah, Mohd. Aliff (2013) Development of nitrocellulose based binder for ammonium perchlorate/aluminium solid propellant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Halakoo, Elnaz (2013) Separation of reactive dyes using PES/SPEEK blend nanofiltration membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Halidan, Husna Aimi (2010) Prokaryotes biodiversity of Dusun Tua Hot Spring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Halimoon, Hazwan (2014) Microbioreactor system with integrated mixing scheme, temperature control and optical density measurement for fermentation and biocatalysis experiments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamid, Kazemi Esfeh (2015) A computational fluid dynamic framework for modeling and simulation of proton exchange membrane fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamidi, Hossein (2014) The ultrasonic waves effects on oil-water emulsification, coalescence, detachment, mobilization and viscosity in porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Hamzah, Afiqah (2013) Performance of flameless combustion using palm oil mill effluent biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Arulhaizal Adam (2011) Reliability assessment for liquefied natural gas ship's distributed control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Noor Nita Natayal (2009) Preparation and characterization of ENR-50/OMMT nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hanani Zainuddin, Nurul Fatin (2010) Biodegradability and properties of polylactic acid/polycaprolactone/montmorillonite/metallocene linear low density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Handan, Rabitah (2000) Portland cement-based solidification/stabilization for the treatment of industrial waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Handayani, Tri Pratiwi (2010) Maximizing annual saving per heat load approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Haron, Roslindawati (2007) Penghasilan dan penulenan separa pullulanase yang dihasilkan oleh Pseudomonas Thermotolerans yang dipencilkan daripada air rawatan sisa kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haron, Saharudin (1999) Penyelakuan prestasi membran gentian geronggang bagi sistem pemisahan gas secara kaedah berangka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hartati, Hartati (2015) Pengekstrakan Swietenia mahagoni menggunakan karbon dioksida lampau genting dan potensi ekstrak sebagai penyembuh luka. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Harun, Noor Hafiza (2008) Kinetic study of chlorobenzene degradation by isolated microbes from wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hasham @ Hisam, Rosnani (2008) Optimization of processing parameters on the yield of oleoresin from zingiber zerumbet and its antibacterial activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hashemifard, Seyed Abdollatif (2011) Development and modelling of mixed matrix membranes incorporating large pore size clay for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Hashim, Haslenda (1999) Penggunaan analisis Exergi untuk menentukan potensi kecekapan loji karbon teraktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Yumi Zuhanis Has-Yun (2002) Effect of processing parameters on the turmeric oleoresin antioxidant activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim Hassan, (2008) Chitosan based membranes for pervaporation separation of isopropanol - water mixtures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasmi, Ahmad Hazlan (2013) Optimization of plastic mould conformal cooling for increasing production rate of plastic product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Hashim (1995) Penghasilan membran gentian geronggang menggunakan spineret buatan tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan, Nor Diana (2009) The effect of copigmentation on the stability of butterfly pea anthocyanins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hassan, Syaiful Nizam (2006) Recovery of spent bleaching clay for reuse in water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hassan Othman, Othman Mohsen (1995) Magnesium sacrificial anode behaviour at elevated temperatures in different environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan Sh Abdirahman Elmi, (2014) Treatment and generation of electricity from palm oil mill effluent using locally isolated electroactive microbes in microbial fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Heidari, Mehdi (2012) Mechanical properties of calcium carbonate and coconut shell filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Heidarpour, Raheleh (2014) Effect of graphene on mechanical properties and flame retardancy of polycarbonate/ acrylonitrile butadiene styrene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Heng, Han Yann (2005) Development of a rule-based fault diagnostic advisory system for precut fractionation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Herawan, Safarudin Gazali (2000) Preparation of carbon molecular sieve from oil palm shell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Herianto, Herianto (2008) Penggunaan ciri-ciri akustik dalam penentuan sifat-sifat batuan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Hii, King Kui (2002) A study of Co-MnO/y-A12O3 and Ca-MnO/y-A12O3 catalysts for CH4-CO2 reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hii, Siew Mee (2013) Sequence analysis of starch degrading enzymes from anoxybacillus species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hindatu Yusuf, (2014) Decolourisation of textile wastewater and bioelectricity generation in microbial fuel cell by Lysinibacillus Fusiformis ZB2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Hirzin, Radin Siti Fazlina Nazrah (2004) Semi-jaringan polimer saling menusuk (Semi-IPN) berasaskan getah asli melalui teknik sinaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ho, Kek Sian (2002) Purification and characterization of cyclodextrin glucanotransferase from bacillus sp. G1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Humaidi, Syahrul (2000) The sensitivity of ceramic gas sensor based on SnO2-Nb2O5-CuO system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Husin, Muhamad Rasyidi (2012) Hydroxyapatite and montmorillonite filled high density polyethylene hybrid composites for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Akos Noel (2013) Preparation and characterization of oil palm fiber reinforced poly(e-caprolactone)/poly(lactic acid) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Busari Bolaji (2014) A graphical cost-screen techniques for carbon management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Mohamad Al Hafiz (2013) Preparation and characterization of compatibilized polypropylene / poly (acrylonitrile-butadiene-styrene) blends and nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Muthmirah (2011) Mechanical, thermal and morphological properties of modified Sabah montmorillonite filled polypropylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Idris, Ani (2001) Fabrication and optimisation of asymmetric hollow fiber membranes for reverse osmosis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ila Najaa Ali Badaruddin, (2014) Preparation and properties of poly(acrylamide)-grafted-kenaf fiber biodegradable hydrogel with slow release urea fertilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Insiong, Henry (2006) Simulation and optimization of propane autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Irawan, Sonny (2006) Development of beneficiation technique for bentonite for applications in petroleum industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Irdlinna Idwar, (2014) Physicochemical, Biochemical and organoleptic analysis of pineapple cultivars MD2 and MORRIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Isha, Ruzinah (2005) Artificial neural networks application in combined carbon dioxide reforming and partial oxidation of methane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ishaimi, Nur Imirah (2007) Mechanical properties of pineapple leaf fibre (palf) reinforced rubber composite. EngD thesis, Universiti Teknologi Malaysia.

Ishak, Amir Fuhaira (2015) Production of selenium enriched saccharomyces boulardii in pilot scale bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ishak, Mohd. Azali (2013) Steady-state CFD simulation of gas-solid flow for inlet boundary conditions in a fluidized bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Ahmad Ramdan (2015) Solubility of swietenia mahagoni seed in supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Atikah (2013) Kenaf and rice husk filled polypropylene composites containing ammonium polyphosphate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Noor Maizura (2005) Adsorption characteristics of protein on zeolite adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ismail, Noor Maizura (2015) Polyethersulfone/cloisite 15A mixed matrx membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Istadi, Istadi (2006) Catalytic conversion of methane and carbon dioxide in conventional fixed bed and dielectric barrier discharge plasma reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ithnin, Masliana (2011) Treatability of leachate using EZ enzyme. Masters thesis, School of Graduate Studies.

Jaafar, Juhana (2011) Development of sulfonated poly (ether ether ketone) triaminopyrimidine nanocomposite membrane for direct methanol fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Jalalvandi, Esmat (2012) Polylactic acid/thermoplastic starch/montmorillonite nanocomposite : morphological, tensile properties, water absortion and degradation behavior. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Jalil, Abdul Rahim (2006) Development of adsorption selective carbon membrane using cellulose acetate for separation of O2/N2 and C1-C4 hydrocarbons/N2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jalil, Suhana (2004) Development of nanofiltration polyethersulfone hollow fiber membrane for cyclodextrin glycosyltransferase (CGTase) separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamil, Md. Kawser (1999) Thermal processing of rubber-based solid waste to liquid fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamil, Siti Munira (2011) Removal of metals from recovered base oil using chitosan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jemale, Alia Sofie (2010) Mixed-mode silica monolith as an efficient separation medium for capillary electrochromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Johari, Anwar (2009) Design and operating parameters of a fulidized bed for the combustion of municipal solid waste using standpipes air distributors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Johari, Anwar (2000) Hydrogen absorption characteristics of MmNi5 and MmNi4.85Fe0.15 as hydrogen storage medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Khairiraihanna (2010) Synthesis and charactrization of sulfur-functionalized spherical silica gels as mercury adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Khairiraihanna (2015) Synthesis, characterization and performance of adsorbents for mercury vapor removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Juiani, Siti Fairuz (2013) Nickel removal from electroless nickel plating wastewater using chitosan-membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jumari, Nur Fazirah (2013) Melt flow index estimation using neural network models for propylene polymerization process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh, Mazura (2010) Development of a novel system for progressive freeze concentration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Mohd. Ruswadi (2008) Commissioning of a pilot scale fluidised bed combustor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Norhana (2009) A ferrocene based glucose biosensor with an extended linear measuring range. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Norhani (2007) Bioremediation of phenol in a chemostat using residential wastewater microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Rohayu (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh @ Alias, Nor Zamiha (2009) Pervaporation separation of methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh @ Alias, Nor Zamiha (2009) Pervaporation separation of methyl tert-butyl ether /methanol mixtures using polyion complex chitosan membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamarrudin, Nadia (2008) Computer based safety training for semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamaruddin, Siti Nurhayati (2014) Life cycle assessment of an electroless nickel plating wastewater treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kamarudin, Khairul Sozana Nor (2006) Structural and gas adsorption characteristics of zeolite adsorbents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamarudin, Muhammad Saufi (2004) Configuration effects on current sharing in multicolumn zinc oxide surge arresters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kannan, Sivaneswaran Kamala (2002) Effect of rice husk ash fillers on properties and processability of abs impact modified unplasticised polyvinylchloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kashinath, Shah Aznie Ariffi (2013) Formulation of green diesel blends and finding potential chemicals as biofuels using computer-aided technique. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kasim, Farizul Hafiz (2001) Catalytic conversion of palm oil to gasoline over HZSM-5 modified with F ion catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kasmungin, Sugiatmo (2004) Penggunaan busa untuk mengawal mobiliti dalam banjiran CO2-busa. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Khairuddin, Nozieana (2009) Wheat-based antimicrobial packaging film incorporated with lysozyme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Khoshtinat Nikoo, Maryam (2015) Reactant dilution effects and reaction kinetics of methane dry reforming in dielectric barrier discharge reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kiakalaieh, Amin Talebian (2015) Gas phase glycerol dehydration to acrolein over supported silicotungstic acid catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kiakalaieh, Amin Talebian (2012) Optimization and kinetic model for transesterification of waste cooking oil using tungstophosphoric acid catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kismojohadi, Endang Listiorini (1995) Zeolite ZSM-5 and aluminophosphate molecular sieves as catalysts in the Fischer-Tropsch reaction : synthesis, characterization and modification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kolundavelu, Thiyagish (2007) Inventory management using lean methodlogy for a chemical industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kolyaei, Maryam (2011) Optimization of biodiesel production of fatty acid esterification using ion exchange resins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kootiani, Reza Cheraghi (2015) Wellbore pressure prediction after pipe connection operation in underbalanced drilling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kormin, Saniah (2005) The effect of heat processing on triterpene glycosides and antioxidant activity of herbal pegaga (Centella asiatica l. Urban) drink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kristanto, Dedi (2004) Lattice gas automata simulations of a single-phase and two-phase flow in heterogeneous porous media. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kuak, Yaang Mooi (2007) Mechanical and morphological properties of polypropylene (PP)/ organoclay/ natural rubber (NR) nanocomposite. Other thesis, Universiti Teknologi Malaysia.

Kunasegeran, K.Kayathre (2010) Mechanical and thermal properties of epoxidized natural rubber toughened polylactic acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kunjirama, Magendran (2012) Adsorption of mercury onto 3-ureidopropyltriethoxysilane grafted empty fruit bunches biosorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kusworo, Tutuk Djoko (2008) Fabrication and characterization of flat sheet and hollow fiber mixed matrix membrane for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kusworo, Tutuk Djoko (2003) Partial oxidation and autothermal reforming of methane for hydrogen production using NiO-CoO/MgO catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laftah, Waham Ashaier (2013) Preparation and characterization of biodegradable polyacrylic acid based hydrogel for agricultural application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laftah, Waham Ashaier (2010) Preparation and characterization of nanocomposite polymer solution based on polyacrylamide for enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lai, Long Wee (2015) Lactic acid production from microwave-alkali pretreated oil palm trunk biomass using simultaneous saccharification and fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lai, Ping Yean (2002) Development of defect-free and ultrathin-skinned asymmetric membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laliliannosrati, Hamidreza (2012) Microwave assisted two step in situ method for biodiesel production from jatropha Curcas L. Seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lam, Hon Loong (2004) Improved multivariate statistical process control for chemical process fault detection and diagnosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lani, Nurul Saadiah (2014) Isolation and characterization of nanocellulose from empty fruit bunch fiber for nanocomposite application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lau, Woei Jye (2008) Perparation, characterization and performance evaluation of negatively charged nanofiltration membrane for dyeing wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Law, Kian Meng (2002) Selective leaching of silver from selected semiconductor waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lawal, Sirajo (2013) Optimization of operating volume of microbioreactor using attainable region approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Le , Thi Ngoc Tram (2004) Pervaporation of isopropanol using chitosan-zeolite a membranes : the effects of zeolite a concentration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Chew Tin (2003) Intensification of inclusion body purification and protein refolding. PhD thesis, University of Cambridge, London, Churchill College, Department of Chemical Engineering.

Lee, Ching Yaw (2010) Effect of variables on the production of red-fleshed pitaya powder using response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Cho Hing (1999) Risk management study on gas transmission system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, David Ik Bing (2001) Development of asymmetric polyacrylonitrile carbon hollow fiber membrane for oxygen/nitrogen gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Jun You (2013) Extraction and identification of proteins and their antioxidant activities from Acacia, Tualang and Gelam honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Sze Yean (2008) Effect of bore fluid and post treatment on polyethersulfone ultrafiltration hollow fiber membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lee, Tin Sin (2010) Simulation and experimental characterizations of polyvinyl alcohol-cassava starch compound for injection moulding application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Ting Hun (1999) Conversion of sugar in pineapple waste to citric acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee , Chee Hong (2004) Parameter and strutural retrofit of palm oil fatty acid fractionation process for improved productivity and energy efficiency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leong, Pei Pei (2015) Production and optimization of indole-3-actic acid by rhodopseudomonas palustris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leong, Wah Heng (2001) Model-based fault detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leow, Chee Who (2011) Purification of fusion peptide biosurfactant using combined chemical extraction and cross-flow microfiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Liew, Chong Wai (2007) Genome sequence survey of locally isolated alkalophilic Bacillus sp.G1 : isolation of alkaline tolerant gene, sodium/proton antiporter gene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Liew, Syh Yeh (2003) ChemDEx web-based data exchange system in chemical process industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Chia Ching (2002) The performance of an adsorptive recirculated packed bed batch reactor in the enzymatic synthesis of ampicillin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Fang Yee (2002) MATRIX : a new systematic technique for retrofit of heat exchanger network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Jian Wei (2006) Development of layered silicates montmorillonite filled rubber-toughened polypropylene nanocomposites (RTPPNC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Lee Ping (2001) Extraction and membrane purification of base oil from used lubricant oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Li Yee (2015) Physicochemical and microbial profile of oil palm empty fruit bunches compost treated with effective microorgnisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Pey Ser (2011) Effect of chain extender on physical and mechanical properties of poly(butylene terephthalate)/recycled glass-filled-poly(ethylene terephthalate)blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Poh Choon (2002) Development of hollow fiber membrane gas separation network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Serena Sue Lynn (2003) A study on the extraction of lutein from selected locally grown vegetation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Sin Yang (2002) Combustion efficiency of palm wates in spouting and bubbling fluidised bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Teck Peng (2003) Computer modeling to optimize gas supply for domestic sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Wan Piang (2005) Inferential estimation and control of chemical processes using partial least squares based model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim , Chee Siang (2004) Simulation modelling and development of a new process for the production of high quality palm oil based on supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim , Leornard Lik Pueh (2004) Hydraulic performance of membrane bioreactor (MBR) for palm oil mill effluent treatment (POME) under aerobic conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Jacky Jia Yii (2013) Effect of bottom ash on the strength characteristics of fly ash and bottom ash mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Lay Pee (1999) Concentrating citric acid and sodium citrate using electrodialysis membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ling, Lay Pee (2002) A study on citric acid and sodium citrate recovery using electrodialysis process with ion exchange membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ling , Leong Yau (2004) Plantwide control of a fatty acid fractionation process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Loh, Pei Shian (2009) Production and purification of monoclonal IgG using protein G affinity chromatography from hybridoma cell culture in serum-free medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Looi, Yat Seong (2005) Comparison of fluidised bed and spouted bed for the combustion of rice husk. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Low, Jiun Hor (2015) Isolation, characterization and preparation of spent coffee ground tannin as eco-friendly wood adhesives. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lye, Jimmy Wei Ping (2015) Adsorptive coagulation-flocculation removal of antibiotics in sewage treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahamad, Mohammed Nabil (2015) Activated carbon from pineapple waste biomass for the removal of methylene blue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahani, Mahani (2010) Biosorption of gold(III), palladium(II) and silver(I) from aqueous solution onto low-cost durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahat, Mohd. Khairizal (2002) Siklodekstrin glukanotransferase daripada bakteria alkalofilik bacillus sp. TS1-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmud, H. N. M. Ekramul (1998) Catalytic cracking of palm oil to liquid fuels over various Y-Type zeolites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahmud, Hafizah (2013) Enhanced secretion of cyclodextrin glucanotransferase in lactococcus lactis using heterologous signal peptide and optimization of induction condition for cultivation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmud, Mahmud (1997) Kajian pendarflour beberapa sebatian daripada pohon kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mak, Weng Yee (2005) Fault detection and diagnosis using correlation coefficients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Malek, Muhammad Khairuddin (2015) Bioprocessing development for anaerobic cultivation of probiotic bacteria bifidobacterium longum for high cell mass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mamat, Nor Sasha Izana (2012) Silver inhibition on recombinant flavin reductase from Citrobacter freundii A1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Mamat, Nur Suriani (2013) Improving cuttings lifting performance using styrene divinylbenzene microsphere in foam drilling fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Man Singh, Harjit Kaur (2005) Zeolite-supported transition metal catalysts to enhance the ozonation of aqueous phenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mansor, Azmi Fadziyana (2011) Enzymatic hydrolysis of cellulose in citronella bagasse for glucose production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Masoud Eid, Ahmad Mustafa (2015) Improvement of anti-inflammation of swietenia macrophylla self nanoemulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat, Ramli (2006) Modification of zeolite Hzsm-5 for methane conversion to higher hydrocarbons. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Akhir, Nor Azurah (2011) The survival and growth of human ovarian carcinoma cell line post treatment with ficus deltoidea extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Isa, Anida (2004) Penghasilan dan pencirian eksopolisakarida daripada Bacillus lichenformis S20A. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Isa, Naurah (2006) Injection moulding parameters and performance of rice husk-high density polyethylene composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Nah, Muhammad Sayuti (2011) Co-digestion of palm oil mill effluent (pome) with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Nawi, Zalina (2007) Targeting minimum power requirement based on direct mechanical power transfer for a large scale chemical complex. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Nayan, Nadirul Hasraf (2010) Characterization and biodegradability of foam based on coconut flesh waste-filled high density polyethylene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Rani, Zulkafli (2014) Production of polyhydroxybutyrate during the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Taher, Zarani (2009) Optimization of processing parameters for curcuma xanthorriza oleorasin yield and its antioxidant activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mataram, Agung (2012) Synthesis, characterization and optimization of polyacrylonitrile electrospun nanofiber membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Matmin, Juan (2011) Preparation of silica-based porous materials from starch-derived low molecular weight organic gelator template. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Maya Sarah, Maya Sarah (2015) Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mazangi, Mojtaba (2013) Gasification of empty fruit brunch in micro fixed bed reactor for hydrogen production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Aripin, Nafizah (2010) Screening of factors influencing biobutanol production from pineapple waste using 2-level factorial design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Md. Arshad, Siti Hadjar (2013) Preparation of activated carbon from oil palm empty fruit bunch for adsorption of phenol and hydrogen. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Buang, Mohd. Ammarul Affiq (2014) Adsorption of arsenate by hexadecylpyridinium bromide modified natural zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Ismail, Norhairani (2009) Solid state fermentation of palm kernel cake for the production of beta-mannanase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Naimi, Fardelen (2004) Penyingkiran boron daripada airsisa menggunakan kombinasi rawatan secara osmosis balikan dan penjerapan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Nazri, Marshabila (2009) Development of an extrusion foaming process for foam biocomposites based on empty fruit bunch (EFB) filled-high density polyethylene (HDPE). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Saad, Suhaiza (2008) Pozzolanic activity of rice husk and its application in the production of lightweight mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Salleh, Liza (2001) Production of soy sauce powder : an aroma retention study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Sarip, Mohd. Sharizan (2012) Subcritical water extraction of 6-gingerol and 6-shogaol from zingiber officinale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Shahrodin, Nur Shazrynda (2014) Synthesis and characterization of cassava starch nanocrystals by hydrolysis method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Shukri, Dyia Syaleyana (2013) Solidification of floating dispersed organic droplets and ionic liquid microextraction methods for the determination of non-steroidal anti-inflammatory drugs in human urine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Yasir, Suhaimi (1996) The effects of several cocoa fermentation parameters on the formation of flavour precursors during fermentation and pyrazines during roasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Yunos, Khairul Faezah (2002) Recovery of citric acid from simulated multicomponent broth using electrodialysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Zaki, Nurul Asyikin (2009) Microwave and microwave - vacuum drying of papaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mel, Maizirwan (2001) Development of infectious coryza vaccine : optimization and scale-up studies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Meysam Davoody, (2012) Neuro fuzzy and hybrid modeling of supercritical fluid extraction of Pimpinella Anisum L. seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mezher, Osamah Abdulameer, (2014) Background radiation measurements in the contaminated area with depleted uranium at Al-Nasiriyah station of electricity distribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Misson, Mailin (2007) The kinetic performance of locally isolated immobilized phenol degrader in repeated batch culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Moghaddam, Alireza Layegh (2013) Biodiesel production using aminated fibrous polymer catalyst in packed continuous reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, Mardawani (2013) Optimal operating conditions of Eurycoma Longifolia extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, Zurina (2003) Adunan polistirena/getah stirena butadiena terisi serbuk sekam padi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Amirul Nizam Mohamed Thari, (2014) Transmission line magnetic field minimization via particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Aziz, Siti Norazimah (2013) Characterization and optimization of mix anionic-nonionic reverse micelle system for Amoxicillin extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Samuri, Sazalina (2005) Optimisation of operating parameters for the removal of ethanol from Zingiber officinale Roscoe (ginger) oleoresin using short-path distillation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed, Musliha (2013) Mechanical and flammability properties of hybrid recycled newspaper/sepiolite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed, Nurul Azlina (2005) Study on important parameters affecting the hydro-distillation for ginger oil production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed Elbashir, Nimir Osman (1998) The effect of design parameters on the solvent extraction performance for recycling of used oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Esivan, Siti Marsilawati (2012) Prediction of lactic acid concentration using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Ghengesh, Mohamed Ghengesh (2011) Treatment of traces of oil from electroplating industry wastewater by using membrane bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed Noah, Norul Fatiha (2015) Emulsion liquid membrane extraction of palladium from simulated electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Noor, Norhayati (2013) Solid lipid particles for improved dermal delivery of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Tap, Fatahiya (2013) Simulation of folding pathway studies of TRP-cage miniprotein, Amyloid A4 peptide and α-conotoxin RgIa peptide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammadian, Erfan (2010) Ultrasonic assisted water flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohammed Merdhah, Amer Badr (2008) The study of scale formation in oil reservoir during water injection at high - barium and high - salinity formation water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Mohd Dom, Zanariah (2003) Enzymatic transesterification of palm olein and lauric acid in stirred batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd Ibrahim, Shazana (2009) Chemical precipitation of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Amin, Nor Amaiza (2015) Accelerated aqueous extraction and phytochemicals screening of eurycoma longifolia (Tongkat Ali) extract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Aris, Aslizah (2008) Optimization of microbial fuel cell using locally isolated electerochemical - active bacterial strains. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Azli, Alyaa Amalina (2013) Removal of heavy metals from crude oils using complexing agents and ionic liquids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Hanafi@Hanafiah, Mohd. Mukrish (2012) The photoprotective and collagen stimulatory effects of labisia pumila var pumila extract on UVB irradiated human skin fibroblast (HSF1184) cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Hanim, Khairilanuar (2014) Recovery of carotenoids from crude palm oil using organic solvent nanofiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Ismail, Nur Suriani (2011) Synthesis of magnetic alginate beads based on maghemite nanopracticles for removal Pb(II) in aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Ismail, Nurul Izzati (2015) Anti-microbial and anti-inflammatory activities of crude and acidified fraction of selected Malaysian honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Kamil, Nurul'Ain (2009) Synthesis and characterization of cellulose acetate from kenaf fiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Mustapha, Norasyikin (2013) Synthesis of tungsten carbide from waste date palm tree carbon by mechanical alloying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Noor, Nur Diana (2011) Synthesis of polyethersulfone ultrafiltration membranes with sodium bromide as additives by microwave irradiation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Noordin, Nurjehan (2007) Comparison of tensile properties experimental data with various theoretical predictions for PVC/NPCC nanocomposites. Other thesis, Universiti Teknologi Malaysia.

Mohd. Rosnan, Rizuan (2012) Rheological, mechanical, morphological and thermal properties ofr ecycled poly (ethylene terephthalate)- polythylene filled montmorillonite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Sa'at, Jasmi (2012) Parameter setting through optimization of variable cooling channels which effect to the injection moulding product quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sakri, Norhaslina (2009) Blended chitosan and poly (vinyl alcohol) membranes for the prevaporation of methanol and methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Sakri, Norhaslina (2009) Blended chitosan and poly(vinyl alcohol) membranes for the pervaporation of methanol and methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Sani, Noor Faezah (2013) Synthesis and characterization of biodegradable poly (xylitol sebacate dodecanoate) nano-hydroxyapatiten composites for potential used in biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Setapar, Siti Hamidah (2004) Anionic reverse micelle liquid-liquid extraction of penicillin G. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Yunus, Khairul Nizam (2004) Penggunaan kaca buangan sebagai agregat halus dalam turapan asfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yunus, Mohd. Yusri (2002) Development of an advisory system using modified hazop approach on a fatty acid fractionation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Yusof, Raihana (2009) Flame retardancy and mechanical properties of maleated HDPE compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Yusoff, Noor Izyan Syazana (2013) Mechanical and thermal properties of poly(methylmethacrylate)-grafted-oil palm empty fruit bunch /talc hybrid filled poly (vinyl chloride) compsites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Rohani (2009) Process modelling of degumming and bleaching in palm oil refining using artifical neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohidin, Khairunnisa (2014) Tailor-made biofuel-diesel blends properties validation and engine performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mokhtaram, Mokhtazul Haizad (2002) Kekuatan blok konkrit ringan berudara yang mengandungi klinker kelapa sawit hancur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moslehyani, Ali (2012) Silver ion exchange fillers incoporated with mixed matrix membrane for antibacterial application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhamad, Ida Idayu (2004) Single kernel effects on breakage during wheat milling. PhD thesis, University of Manchester Institute of Science and Technology (UMIST), Department of Chemical Engineering.

Muhammad Sani, Shehu (2012) Optimization of sludge disintegration from IWK-bunus sewage treatment plant for enhanced biogas yield. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhammad Zaidi, Nor Fadzilah (2010) Expression and characterization of recombinant beta-xylosidase from Trichoderma reesei ATCC 58350 in Pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Munir, Sadiq Muhammad (2011) A holistic approach for industrial total site carbon planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Musa, Nor Syamimi (2012) Chemical oxygen demand reduction of pineapple industry wastewater by locally isolated microbes in column system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mushtaq, Faisal (2015) Microwave-assisted pyrolysis and co-pyrolysis of coal and oil palm shell with coconut shell activated carbon as microwave absorber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustaffar, Mohd. Idham (2004) Development of asymmetric polyethersulfone hollow fiber ultrafiltration membrane for cyclodextrin separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mustapa, Ana Najwa (2008) Extraction of palm oil from palm mesocarp using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mustapha, Sa'ari (1994) Clarification of crude palm oil slurry by filtration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mutia, Reiza (2015) Production and characterisation of cocoa butter equivalent from formulated hard palm oil midfraction and canola oil blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nabgan, Bahador (2014) Hydrogen production from acetic acid-phenol steam reforming over bimetallic nickel-cobalt supported on lanthanum oxide-gamma aluminum oxide catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Naddafian, Amirhossein (2013) Preparation and charactrization of modified poly (ETHER ETHER KETONE) (PEK-WC) nanofiltration membrane for water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Naghib, Syed Danial (2012) Preparation and characterization of magnetic nanoparticles immobilized in acrylamide based hydrogels for metal extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Naim, Rosmawati (2004) Development and characterization of sulfonated polysulfone membrane for proton exchange membrane fuel cell (PEMFC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Naim, Noor Aishah (2004) Keberkesanan pemindahan teknologi dalam Industri petrokimia di Malaysia: Kajian kes di MTBE Sdn. Bhd, Gebeng, Kuantan. Masters thesis, Universiti Teknologi Malaysia.

Namazkar, Shahla (2013) Spray dried prodigiosin from Serratta Marcescens as a food colorant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Narayanan, Arresh Vhina (2002) Application of slag cement based aerated lightweight concrete in non-load bearing wall panels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Narayanasamy, Menaka (2015) Computational approaches for optimal design of tailor made biofuel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nasir, Nur Atiqah (2013) Catalytic oxidative desulfurization of diesel fuel utilizing monometallic, bimetallic and trimetallic oxides doped on molybdena supported alumina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nawog, Methodius (2013) Synthesis and characterization of zeolite linde type A from rice husk ash and its application as ammonium removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Soon Lee (2000) Control of polymerization reactor using the hybridization of statistical process control and automatic process control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ng, Swee Siang (2002) Cleaning of biofouling in membrane bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Yee Ming (2008) Strategy for adaptive linear quadratic dynamic matrix control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Ng , Be Cheer (2004) Development of polysulfone asymmetric membrane using pneumatically-controlled membrane casting system and the study of the effects of shear rate and forced convection residence time on gas separation membranes performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ngo, Saik Peng (2002) Design and three-dimensional computational fluid dynamics modelling of the horizontal rotating fluidised bed combustor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngo, Saik Peng (2006) Production of amorphous silica from rice husk in fluidised bed system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ngoo, Kea Hing (2008) Effect of nano and micron - sized calcium carbonate on mechanical, thermal and flammability properties of ABS/PVC blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Nik Abd. Aziz, Nik Norashikin (2015) Inherent occupational health assessment for chemical batch processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Noh, Mohamad Zaky (1998) Effect of composition, sintering and grain size on cullet-mica ceramic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Noh, Teh Ubaidah (2014) Disposable cysteine based electrochemical impedance biosensor for skin sensitization analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nor Hassan, Nor Sarizal (2013) Characterization and biodegradation of poly (vinyl alcohol)/cassava starch. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nor Izzati Hashim, (2014) Effects of different serial fiber arrangements on microbending losses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nor Kamarudin, Khairul Sozana (1995) Combustion of municipal solid waste to produce heat, steam or electricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nordin, Husna Zahira and Jamaluddin, Jamarosliza (2007) The effect of different LDPE/starch content in thermmoformed food packaging product. EngD thesis, Universiti Teknologi Malaysia.

Nordin, Nur Dianaty (2013) Development of microbial fuel cell using speek/cloisite 15A membrane for electricity generation from palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Norharyati Saleh, (2014) Performance of cement grout incorporating ceramic waste as filler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Norouzi, Azimeh (2013) Optimization of Flavonol Synthase (FLS) gene amplification from Melastoma decemfidum via PCR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nur, Hadi (1998) Tailoring of novel metal substituted AIPO4-5 molecular sieves as potential catalysts for conversion of alcohols. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nur Fatin Sulaiman, (2013) Base heterogeneous catalytic transesterification of rice bran oil to biodiesel using calcium oxide nanostructured. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nur Syukriah Ab Rahman, (2014) Antioxidant, anti microbial and wound healing properties of quercus infectoria gall extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Nurul Asma Safiee, (2013) Numerical solution of non-isothermal compressible natural gases mixed with hydrogen in pipeline using method of lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Oko, Augustine Agha (2013) An integrated energy and water footprint for office building sustainable green management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Olya, Mohammad Emad (2013) Protein engineering of alpha-amylase from anoxbacillus sp, SK3-4 with saturation mutagenesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Omar, Noor Farhana (2009) Injection molded foamed rice straw/LDPE with sodium bicarbonate and citric acid foaming agent : effect of foaming agent composition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ong, Rui Min (2005) Molecular cloning of Cyclodextrin glucanotransferase gene from Bacillus sp. G1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ooi, Boon Lee (2005) Development of a computer software for optimal design and retrofit of heat exchanger network in a chemical process plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ooi, Shu Wooi (2014) Mechanical and flammability properties of graphene reinforced compatibilized poly(lactic acid) / poly(butylene adipate-co-terephthalate) nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ooi, Zing Yi (2015) Recovery of kraft lignin from pulping wastewater using emulsion liquid membrane process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Nor Zalina (2009) Influence of carbohydrate protein coconut oil mixtures on the viability on ecapsulated spray dried lactobacillus bulgaricus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Othman, Norasikin (1996) Penyelesaian berangka bagi gandingan aliran dan pembentukan kek di dalam proses penurasan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Norhayati (2007) Effects of pressure and feed flow rate on ultrasonic cleaning system (DUCS) for sintered stainless steel membrane in oleochemical plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Othman, Nur Hidayati (2009) Synthesis, characterization and optimization of sulfonated polyether ether ketone composite membrane for direct methanol fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Othman, Nurul Sakinah (2015) Removal of dyes by silica nanoparticles with immobilized laccase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Rafidah (2007) Thermal insulation and mechanical properties of construction materials with nitrile rubber (NBR) waste for construction industry. EngD thesis, Universiti Teknologi Malaysia.

Pae, Norhayati (2009) Rotary discs reactor for enhanced production of microbial cellulose. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Palaniappan, Yogeswary (2006) Degradation of phenol by a catalytic ozonation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Pandian, Santha (2015) Computer aided approach for occupationally healthier chemical assessment and selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Paparimoghada, Gholamhooseyn (2014) Modification of sago based membrane for pervaporation separation of cesium formate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Parak, Mahdi (2011) The effects of mixed surfactant on adsorption in different clay minerals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Phillip King Ik Piau, Martin (2001) Development of natural gas fuel system for motorcycle with exhaust emission and performance comparison to gasoline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Poh, Hong Hwee (2007) Application of computer based simulation in gas network system using graph theory algorithms and numerical methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Prasetyoko, Didik (2001) Pengoptimuman sinThesis zeolit beta daripada silika sekam padi : pencirian dan tindak balas pemangkinan friedel-crafts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rafiei, Alireza (2013) Design of carbon dioxide absorption from polluted city air. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Raheem Saeed, Mohammed Abdul (2014) Synthesis and characterization of Ni-Co on different composition support towards hydrogen production from acetic acid steam reforming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rahman, Kamalesh (2005) Molecular and enzymatic studies of cyclodextrin glucanotransferase gene from Bacillus sp. TS1-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Rahmanian, Mehdi (2014) Hydrogen recovery from the reforming gas using commercial activated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Raja Sulaiman, Raja Norimie (2014) Removal of ionized nanosilver from wash water using emulsion liquid membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ramli, Hasniza (2003) Growth optimization studies of amylomyces rouxii and the cloning and expression of glucoamylase cDNA in E. coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramli, Nur Aainaa Syahirah (2015) Renewable levulinic acid production catalyzed by iron modified by zeolite and functionalized ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ramli, Zainab (1995) Rhenium-impregnated zeolites : synthesis, characterization and modification as catalysts in the methathesis of alkenes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rani, Siti Ilyani (2004) Formulation of demulsifier for treating Malaysian crude oil emulsion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rashid, Muhammad Usman (2012) The adsorption characteristics of gold onto 3 aminopropyltriethoxysilane grafted coconut pith. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Rashidi, Saba (2012) The effects of carbon black in epoxy coating filled polyaniline/nano-zinc/carbon black on corrosion resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Razali, Firdausi (2002) Thermal induction and overexpression of a foreign protein in 'Escherichia Coli' culture. PhD thesis, University of Waterloo, Ontario, Canada, Faculty of Chemical Engineering.

Ridha, Firas Noori (2006) A study on high-pressure adsorption and desorption of methane, ethane, propane and their mixtures on porous adsorbents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ridzuan, Norida (2004) Development of high performance and defect-free asymmetric polyethersulfone membranes for O2/N2 separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Rosiah Rohani, Rohani (2007) Proton exchange membranes by radiation-induced grafting of styrene and acrylonitrile mixtures onto poly (ethylene-co tetrafluoroethylene) film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Saad, Siti Sarahanim (2013) Modelling of blood flow as extended korteweg-de vries and extended korteweg-de vries burgers equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sadeghi, Maliheh (2014) Enhancement of Poly (Vinyl Alcohol) membrane packaging material by using beta-cyclodextrin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sadighi, Sepehr (2012) Modeling of vacuum gas oil hydrocracking process using lumping approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Said, Nazirah (2013) Ortho-cresol as indicator for toluene exposure among workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Said, Nazirah (2013) Ortho-cresolas as indicator for toluene exposure among workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sairi, Masniza (2005) The deacidification of pineapple juice using electrodialysis with monopolar ion exchange membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Salam, Bodius (1996) Catalytic upgrading of palm oil to substitute petroleum derived fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salehiyan, Reza (2010) Properties of polylactic aicd/polycaprolactone/montmorillonite (PLA/PCL/MMT) nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Salehuddin, Siti Maizatul Farhain (2015) Characterization of polymethyl methacrylate / feather fiber / montmorillonite composites for dental post application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Salehudin, Mohd. Harfiz (2014) Chitosan starch based packaging film enhanced with empty fruit bunch cellulose nanofiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Salleh, Eraricar (2011) Properties of starch-based packaging film incorporated with chitosan and lauric acid as antimicrobial agents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Saman, Norasikin (2011) Synthesis and characterization of sulfur functionalized mesoporous silicas as mercury adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Samsudin, Dalina (2007) Characterization of calcium carbonate / polystyrene composite prepared by in-situ emulsion polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Samsudin, Sani Amril (2002) Mechanical properties and chemical resistance of polystyrene/polypropylene blends : effect of sebs as a compatibilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sanati, Parisa (2013) Effect of silver-based products on simulated body fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sangaran Kutty, Nalini Kumari (2001) Factors affecting the potting resin used in the hollow fiber membrane module manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sanusi, (2013) Optimization of round shape floating LNG supply chain efficiency with simulation modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saoud, Amer Ali (2004) Solvent extraction of essential oils from plants using microwave technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sayid Abdullah, Sharifah Hanis Yasmin (2012) Treatment of simulated refinery based sulfidic spent caustic using photo-fenton oxidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Selamat, Nur Zalina (2015) Isothermal crystallization study and mechanical properties of polypropylene/polystyrene/styrene-ethylenebutadiene- styrene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Seth, Nur Hikamah (2009) Synthesis of palm oil-based polyol via glycerolysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Shamsul Annuar, Nur Arbainah (2012) Lipid and phytochemicals profiles of non heat treated virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sharifzadeh, Ghorbanali (2013) Synthesisise and characterization of polyacrylamide/ sodiumcarboxymethyl cellulose/ montmorillonite nanocomposite hydrogel vaginal ring for drug delivery systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sharifzadeh, Ghorbanali (2013) Synthesis and characterization of polyacrylamide/sodium carboxymethyl cellulose/montmorillonite nanocomposite hydrogel vaginal ring for drug delivery systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shia, Yoke Lin (2002) Application of modified genetic algorithm in process optimisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shikh Zadeh, Khadija Morad (2015) Tensile, thermal and flammability properties of date palm fiber filled recycled ternary blends and composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sidik, Hayatu Umar (2012) Anaerobic co-digestion of palm oil mill effluent with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sim, Kian Hong (1999) The formation and stability of water-in-oil emulsion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Siregar, Tirena Bahnur (2005) Catalytc cracking of palm oil to gasoline using zeolite catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Siti Haslina Ahmad Rusmili, (2014) Nanosized sodalite as support for titanium and zinc oxides in photocatalytic conversion of n-hexane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

So , Lea Kun (2004) Dehydration of isopropanol-water mixture by pervaporation using Y-type zeolite-filled chitosan membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Soe, Soe Nu (2002) Theoretical analysis of design parameters of single stage absorption refrigeration system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soloi, Sabrina (2010) Low density polyethylene (LDPE)/tapioca starch (TS)/calcium carbonate (CaCO3) blown film : processability and properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Soltani, Mohammad (2013) Electrochemical impedance spectroscopic analysis of binding interactions between haptens and poly L- Arginine and poly L-Lysine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Spalie, Nurul Syuhada (2013) Conversion of glycerol to methanol over copper and nickel supported on HZSM-5 zeolite by hydrothermal process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Subuh, Salawati (2002) Pembangunan fasa pegun poli (stirena-divinilbenzena) berliang terikat kumpulan alkil sebagai bahan padatan dalam pengekstrakan fasa pepejal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sulaiman, Ahmad Ziad (2005) A study on the effectiveness of in-situ high intensity ultrasonic (HIU) in increasing the rate of filtration in palm oil refining industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Suleiman, Mohd. Salleh (2012) Determination of optimum sodium bicarbonate injection rates for acid hydrochloric scrubbing in a clinical waste incineration plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Suradi, Nur Liyana (2015) Preparation and characterisation of kenaf bast fibre reinforced recycled polypropylene/recycled polyamide 6 composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Surjosatyo, Adi (1998) Fluidised bed incineration of palm shell and oil sludge waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Surjosatyo, Adi (2002) Development of a low-calorific value gas swirl burner incorporated with a two-stage biomass combustion system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Susanti, Deny (2000) Kajian kimia dan bioaktiviti tiga spesies tumbuhan rubiaceae. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Susanti, Deny (2006) Phytochemical and bioactivity studies of Melastoma Malabathricum L. and Melastoma Imbricatum Wall. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Suzilawati Zainal Abidin, (2014) CFD modelling on effect of different gasifying agents on syngas production from coal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syafikah Ayob, (2013) Model peralihan jisim serentak bagi titisan-titisan yang pelbagai saiz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Taher, M. (2005) Isolation and in vitro antidiabetic properties of a proanthocyanidin from Cinnamomum zeylanicum. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Amy Siew Wern (2009) Modelling, control and optimization of industrial suspension polyvinyl chloride reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Chiew Woon (2010) Optimisation of the hydrolysis of oil palm empty fruit bunch to glucose using RSM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Czek Hoong (2004) Pressure drop analysis for optimum inside-casing gravel pack design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Eddie Ti Tjih (2007) Physicochemical and biochemical properties of edible bird's nest. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Eng Fong (2002) Study of nitrogen oxide reduction in the presence of propene over cerium (IV) oxide based catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Jaan Soon (2001) Preparation of microporous carbon adsorbents from oil palm shell by physical and chemical treatments for gas separations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Justin Jyuan Li (2007) Health based risk assessment of a biomedical waste incinerator plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Sie Ting (2015) Structural optimisation approach and indicators for integrated municipal solid waste management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Soon Huat (2001) Production of chitosan based pervaporation membranes from domestic shrimp shells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Xiao Ping (2013) A study of properties of low density polyethylene/ palm pressed fibre biocomposite film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Yin Ling (2005) Development of new systematic techniques for retrofit of water network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tay, Chin Chau (1999) The imported China processed foods wholesale business opportunity in southern-central of Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Tea, Swee Sin (2005) A comparative study on the jet loop reactor and continuos stirred tank reactor in the selective hydrogenation of palm olein (I.V.64). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tengku Ngah, Tengku Ida Sofina (2009) Preparation and properties of proton exchange membrane based on poly(vinylidene fluoride) by radiation-induced grafting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Teo, Chee Loong (2015) New microwave based transesterlfication techniques for biodiesel production from cultivated microalgae. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Terry, George Paou (2002) Storage capacity and delivery performance of commercial adsorbents for adsorbed methane storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Then, Charles Khoon Thiam (2012) Optimization of medium and fermentation parameters for high cell density cultivation of azotobacter vinelandii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thevarajoo, Suganthi (2013) Isolation and characterization of bacteria from the skins of guava and apple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Thi Ngoc Phuong, Bui (2000) A suitable cement system for fractured formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tien, Siew Fen (2001) Isolation of Alkalophilic Bacillus SP. G1 and the production of Cyclodextrin Glucanotransferase (CGTase). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ting, Lee Yu (2008) Effect of selective nutrients in medium on human skin fibroblasts growth and metabolism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ting, Teo Ming (2015) Preparation and characterization of radiation grafted fibrous adsorbent containing N-methyl-D-glucamine for boron removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Toh, Wen Yee (2011) Compounding, characterizations and biodegradation studies of sago pith waste-filled poly(vinyl alcohol) biocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tuan Abdullah, Tuan Amran (2000) Modifikasi kaedah perturbasi untuk tindakbalas tertib kedua tidak berbalik dalam reaktor campuran sempurna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tuan Chik, Syed Mohd. Saufi (2004) Formation and characterization of polyacrylonitrile (PAN) carbon hollow fiber membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tung, Chun Yaw (2005) Simulation study on the carbon dioxide reforming of methane using hydrogen permselective membrane reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tunku Mahmud, Tunku Hana (2014) Stability and efficiency of Kacip Fatimah-Chitosan nanoparticles as a delivery system in facial cleansing formulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Utami, Syelvia Putri (2011) Optimization of biomass conversion to 5-hydroxymethylfurfural by catalytic hot compressed water and ionic liquid processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Vojdani, Mohammad (2012) Decolorization of orange II DYE using bacteria immobilized onto multi-walled carbon nanotube cement composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wahidin, Suzana (2015) Cultivation of nannochloropsis sp. for biodiesel production via microwave irradiation direct transesterification using ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Abdullah, Wan Rafizah (2007) Development and characteriztion of polysulfone - carbon molecular sieves mixed matrix membrane for oxygen/nitrogen gas sepation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wan Hassan, Wan Ahmad Hafiz (2004) Development of asymmetric polysulfone membrane for the application in tropicalized lead acid battery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wan Md. Zain, Wan Salwanis (2005) Production of cyclodextrin glucanotransferase from alkalophilic bacillus sp. Ts1-1 using fed batch culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wan Yussof, Wan Mohd. Hafizuddin (2004) The behaviour of the adsorption process using polymeric resin amberlite XAD-7-as an adsorbent in stevioside recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Zamri, Wan Mastura (2014) Optimization of extraction and spray drying processes of Tongkat Ali extracts using response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wang, Jun Jie (2012) Optimization study on recovery hydrocarbons from pyrolysis oil using ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wardani, Kusumo (2002) Silver leaching from selected semiconductor waste using cyanex 471X in kerosene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wasli, Azaliza Safarida (2007) Prawn waste degradation using crude chitinase produced by trichoderma virens UKM-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wee, Chen Chen (2008) Chromatographic purification strategies for recombinant human transferrin from spodoptera frugiperda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wong, Chiang Sheng (1999) Development of robust neural network models for process estimation and control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, Ee Ting (2015) Copper (II) removal from aqueous solution using cobalt-doped iron oxide polyvinyl alcohol-alginate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, Fui Ling (2008) Enzyme immobilization and permselectivity analysis of an interference free peroxide based glucose biosensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wong, Hon Loong (2008) Synthesis and catalytic study of zeolite supported platinum-tungstophosphoric acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wong, Lorna (2001) Effect of CO2-induced plasticization on the performance of asymmetric polysulfone membranes for CO2/CH4 gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, Tak Hiong (2001) Modelling of a recirculated packed bed immobilized enzyme reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, Teck Siang (2003) Advanced process control of fatty acid distillation column using artificial neural networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong , Evelyn Tien Ee (2004) Optimization of fermentation variables for the production of cyclodextrin glucanotransferase (CGTase) by locally isolated Bacillus stearothermophilus HR1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ya'aini, Nazlina (2012) Levulinic acid production from lignocellulosic biomass using hy zeolite supported chromium catalyst in ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yaacob, Nurshahnawal (2005) Effect of CO2-induced platicization and membrane configuration on the performance of asymmetric polysulfone hollow fiber membrane for CO2/CH4 gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Yang, Kong Woh (2001) Convergence characteristics of steady state gas network system using numerical loop-node method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yeap, Beng Hi (2002) Computational modeling of air-fuel mixer for natural gas powered motorcycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yerzhan, Abylkhanov (2009) Improving oil recovery in Kazakhstan oilfields by using polyacrylamide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Yhaya, Mohd. Firdaus (2007) Development of scratch and abrasion resistance coating materials based on nanoparticles cured by radiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Yip, Kai Pui (2001) Development of debottlenecking option for crude distillation unit by reusing the condensate tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yuliusman, Yuliusman (2000) Selective liquid-liquid extraction of silver from pure and photographic waste solutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yuniarto, Adhi (2015) Palm oil mill effluent treatment using aerobic submerged membrane bioreactor coupled with biofouling reducers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yunos, Muhamad Zaini (2007) Preparation of coconut shell fiber grafted poly(butyl acrylate) using H2O2/FE2+ as an initiator. EngD thesis, Universiti Teknologi Malaysia.

Yunos, Muhamad Zaini (2010) Rice straw fiber reinforced thermoplastic starch : effects of fiber content and sizes, starch type and glycerol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusof, Norhaniza (2013) Characterization of polyacrylonitrile-based carbon fibers for gas adsorption process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Yusof, Nurul Bashirah (2015) The comparison study of different additives on the characteristic and performance of ficus deltoidea- loaded niosomes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zabidi, Mohd. Saiful Affendi (2013) Mechanical and flammability properties of hybrid recycled newspaper/ montmorillonite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zabidi, Mohd. Saiful Affendi (2013) Mechanical and flammabillity properties of hybrid recycled newspaper/montmorillonite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zailani, Ramlan (1995) Fluidised bed pyrolysis of organic solid waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainal Abidin, Shahrul Azman (1996) Development stages of gas network analysis program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zainal Alam, Muhd. Nazrul Hisham (2005) Scale-up strategies in stirred and aerated bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Zainuddin, Khairunnisa (2011) Production of biodiesel from algae oil by extraction-transesterification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zakaria, Siti Aminah (2015) Framework of computer-aided sustainable integrated process design and control for reactor systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zakaria, Zaki Yamani (2003) Optimization of oxidative coupling of methane using experimental design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Zamzuri, Nurul Huda (2012) Production of hydrogen by steam reforming of glycerol over nickel supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zanariah Zainudin, (2014) Modeling medical doctor rostering using hybrid genetic algorithm-particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zarei, Alireza (2012) Optimization of biodiesel production from jatropha oil using immobilized lipase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zubairi, Saiful Irwan (2006) The yield and biological activity (LC50) of rotenone extracted from Derris elliptica. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Zulkania, Ariany (2004) Formation and stability study of some Malaysian crude oil emulsions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Teaching Resource

Abd Hamid, Mohd. Kamaruddin (2006) Gas processing and petroleum refining technology. [Teaching Resource] (Unpublished)

Abd Hamid, Mohd Kamaruddin and Mohd Yusof, Khairiyah and Hassim, Mimi Haryani and Baderon, Ahmad Kamal (2005) SKC 5771 Process Control Laboratory Student's Manual. Second Edition and Revised. [Teaching Resource] (Unpublished)

Abd. Hamid, Mohd. Kamaruddin (2006) Computer aided chemical engineering (Excel/VBA). [Teaching Resource] (Unpublished)

Abdul Majid, Fadzilah Adibah (2002) Mammalian Cell Culture Technology. [Teaching Resource] (Unpublished)

Asli, Umi Aisah Teaching Portfolio. [Teaching Resource] (Unpublished)

Kidam, Kamarizan UTM Degree++ Program Area: Safety & Health At Work. [Teaching Resource] (Unpublished)

Other

Abdul Majid, Zulkifli and Yaacob, Zulkefli and Ahmad Khan, Yasmin (2006) The use of natural gas as fuel for motorcycles. Gasteg. (Submitted)

FKKKSA, Dean (2006) Faculty of Chemical and Natural Resources Engineering Annual Report 2006. Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Samsuri, Ariffin Perlantikan Penulis Ensiklopedia: Sains & Teknologi - Penyimenan Telaga, Minyak Mentah, Penyimenan Himpitan, Pemisah Minyak & Gas, Penebukan, Air Suntikan, Talian Dawai, Pengelogan Telaga, Peretakan Hidraulik, Pengelogan Pengeluaran, Kejuruteraan Penggerudian, Prestasi Cok, Pengujian Petroleum, Kejuruteraan Petroleum, Kemudahan Peralatan Permukaan Dan Loji Pemprosesan Gas. UNSPECIFIED. (Unpublished)

This list was generated on Thu Sep 29 03:15:48 2016 MYT.