Items where Subject is "T Technology > TN Mining engineering. Metallurgy"

Article

Nordin, N. A. H. M. and Ismail, Ahmad Fauzi and Mustafa, A. and Murali, R. S. and Matsuura, T. (2014) The impact of ZIF-8 particle size and heat treatment on CO2/CH4 separation using asymmetric mixed matrix membrane. RSC Advances, 4 (94). p. 52541. ISSN 2046-2069

Abdul Karim, Zulhairun and Ng, B. C. and Ismail, Ahmad Fauzi and Murali, R. Surya and Abdullah, Mohd. Sohaimi (2014) Production of mixed matrix hollow fiber membrane for CO2/CH4 separation. Separation and Purification Technology, 137 . pp. 1-12. ISSN 1383-5866

Abd. Aziz, M. Azreen Firdaus and Idroas, Mariani and Zakaria, Zainal and Md. Zin, Ridhwan and Ibrahim, Muhammad Nasir (2014) The use of reflection mode ultrasonic transceiver sensor in pipeline inspection guage to monitor pipeline internal corrosion. Jurnal Teknologi, 70 (3). pp. 97-101. ISSN 0127-9696

Abdul Karim, Zulhairun and Ismail, Ahmad Fauzi (2014) The role of layered silicate loadings and their dispersion states on the gas separation performance of mixed matrix membrane. Journal of Membrane Science, 468 . pp. 20-30. ISSN 1873-3123

Abdul Majid, Zulkifli and Mohsin, Rahmat and Yaacob, Z. and Hassan, Zulkafli (2014) Erosive failure of natural gas pipes. Journal of Pipeline Systems Engineering and Practice, 5 (4). ISSN 1949-1190

Abdullah Sani, Nur Aimie and Lau, Woei Jye and Ismail, Ahmad Fauzi (2014) Performance of polyphenylsulfone-based solvent resistant nanofiltration membranes in removing dyes from methanol solution. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 29-32. ISSN 0127-9696

Ahmad, Siti Halimah and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi (2014) Carbon dioxide (CO2) separation from natural gas using single-layer and dual-layer mixed-matrix membranes (MMMs). Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 67-71. ISSN 0127-9696

Ahmed, Murtala Musa and Nasri, Noor Shawal and Mohsin, Rahmat and Hamza, Usman Dadum and Mohammed, Jibril (2014) Preparation of epoxy-novolac resin binder using phenolic rich fractions of biomass pyrolytic oil as partial substitute of phenol. Applied Mechanics and Materials, 554 . pp. 101-105. ISSN 1660-9336

Alahdad, Rezvan and Alavi, Masoumeh and Ninggal, Mohd. Tajudin and Mirzaei, Fariba (2014) Identifying major traits of personality towards life satisfaction among married students. 4th World Conference on Psychology, Counseling and Guidance (WCPCG-2013), 114 . pp. 394-398. ISSN 1877-0428

Alias, Noorhaza and Ibrahim, Norazana and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah and Ali, Roshafima Rasit and Sadikin, Aziatul Niza and Asli, Umi Aisah (2014) Thermogravimetric analysis of rice husk and coconut pulp for potential biofuel production by flash pyrolysis. Malaysian Journal of Analytical Sciences, 18 (3). pp. 705-710. ISSN 1394-2506

Alias, Nur Hashimah and Nor Kamarudin, Khairol Sozana and Ghazali, Nurul Aimi and Tengku Mohd., Tengku Amran and Sauki, Arina and Jaafar, Mohd. Redwan (2014) Carbon dioxide separation using amine modified zeolite in pressure swing adsorption system. Key Engineering Materials, 594-59 . pp. 160-167. ISSN 1013-9826

Aminudin, Nurul Nabilah and Basri, Hatijah and Yunos, Muhammad Zaini and Harun, Zawati and Goh, Pei Sean (2014) Effect of pH on bovine serum albumin (BSA) solution to polysulfone-based membrane. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 77-79. ISSN 0127-9696

AttarHamed, F. and Zoveidavianpoor, Mansoor (2014) The foaming behavior and synergistic effect in aqueous CO2 foam by in situ physisorption of alpha olefin sulfonate and Triton X-100 surfactants and their mixture. Petroleum Science and Technology, 32 (19). pp. 2376-2386. ISSN 1091-6466

Attarhamed, F. and Zoveidavianpoor, Mansoor and Jalilavi, M. (2014) The incorporation of silica nanoparticle and alpha olefin sulphonate in aqueous CO2 foam: investigation of foaming behavior and synergistic effect. Petroleum Science and Technology, 32 (21). pp. 2549-2558. ISSN 1091-6466

Azhari, Muhamad Azwar and Omar, Nooririnah and Mustaffa, Nuzaimah and Ismail, Ahmad Fauzi (2014) Carbon dioxide permeation characteristics in asymmetric polysulfone hollow fiber membrane: effect of constant heating and progressive heating. Advanced Materials Research, 896 . pp. 37-40. ISSN 1022-6680

Bakeri, Gholamreza and Ismail, Ahmad Fauzi and Rahimnejad, Mostafa and Matsuura, Takeshi (2014) Porous polyethersulfone hollow fiber membrane in gas-liquid contacting processes. Chemical Engineering Research and Design, 92 (7). pp. 1381-1390. ISSN 0263-8762

Bakhsheshi-Rad, Hamidreza Reza and Haerian, B. and Najafizadeh, Abbas and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Hamzah, Esah and Daroonparvar, Mohammadreza (2013) Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel. Canadian Metallurgical Quarterly, 52 (4). pp. 449-457. ISSN 0008-4433

Bayat, Ali Esfandyari and Junin, Radzuan and Ghadikolaei, Farshad Daraei and Piroozian, Ali (2014) Transport and aggregation of Al2O3 nanoparticles through saturated limestone under high ionic strength conditions: measurements and mechanisms. Journal of Nanoparticle Research, 16 (12). ISSN 1388-0764

Bidin, Noriah and Mohd. Noor, Faizani and Tamuri, Abd. Rahman (2011) Characteristic of femtosecond titanium sapphire oscillator. Enabling Science and Nanotechnology, 1341 . pp. 264-267. ISSN 0049-6979

Chong, Kokchung and Lai, S. O. and Lau, Woei Jye and Ooi, B. S. (2014) Preparation, characterisation and performance of polyvinylidene fluoride membrane for sodium chloride rejection in direct contact membrane distillation. Materials Research Innovations, 18 . S6359-S6363. ISSN 1432-8917

Dashtarzhandi, M. Rezaei and Ismail, Ahmad Fauzi and Hashemifard, Seyed Abdollatif and Bakeri, Gh. H. and Matsuura, Takeshi (2014) Experimental study on the performance and long-term stability of PVDF/montmorillonite hollow fiber mixed matrix membranes for CO2 separation process. International Journal of Greenhouse Gas Control, 26 . pp. 147-157. ISSN 1750-5836

Emadzadeh, D. and Lau, Woei Jye and Matsuura, T. and Hilal, N. and Ismail, A. F. (2014) The potential of thin film nanocomposite membrane in reducing organic fouling in forward osmosis process. Desalination, 348 . pp. 82-88. ISSN 0011-9164

Emadzadeh, D. and Lau, Woei Jye and Matsuura, T. and Ismail, A. F. and Rahbari-Sisakht, M. (2014) Synthesis and characterization of thin film nanocomposite forward osmosis membrane with hydrophilic nanocomposite support to reduce internal concentration polarization. Journal of Membrane Science, 449 . pp. 74-85. ISSN 0376-7388

Esmaeili, Chakavak and Ghasemi, Mostafa and Lee, Yook Heng and Hassan, Sedky H. A. and Abdi, Mahnaz M. and Wan Daud, Wan Ramli and Ilbeyg, Hamid and Ismail, Ahmad Fauzi (2014) Synthesis and application of polypyrrole/carrageenan nano-bio composite as a cathode catalyst in microbial fuel cells. Carbohydrate Polymers, 114 . pp. 253-259. ISSN 0144-8617

Fattahi, Ali and Derahman, Mohd. Nawi and Yunan, Mat Hussin (2014) The effect of conductive fracture on the performance of steam assisted gravity drainage (SAGD). Petroleum Science and Technology, 32 (10). pp. 1175-1183. ISSN 1091-6466

Garba, A. and Nasri, N. S. and Basri, H. and Ismail, R. and Abdul Majid, Z. and D. Hamza, U. and Mohammed, J. (2016) Adsorptive removal of phenol from aqueous solution on a modified palm shell-based carbon: fixed-bed adsorption studies. Desalination and Water Treatment, 57 (60). pp. 29488-29499. ISSN 1944-3994

Goh, Pei Sean and Tan, Y. H. and Lai, G. S. and Lau, W. J. and ISmail, Ahmad Fauzi (2014) Treatment of aerobic treated palm oil mill effluent (AT-POME) by using TiO2 Photocatalytic process. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 61-63. ISSN 0127-9696

Gohari, R. Jamshidi and Halakoo, Elnaz and Lau, W. J. and Kassim, Mohd. Azraai and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2014) Novel polyethersulfone (PES)/hydrous manganese dioxide (HMO) mixed matrix membranes with improved anti-fouling properties for oily wastewater treatment process. RSC Advances, 4 (34). pp. 17587-17596. ISSN 2046-2069

Hamidi, H. and Mohammadian, E. and Junin, Radzuan and Rafati, R. and Azdarpour, A. and Junid, M. and Savory, R. M. (2014) The effect of ultrasonic waves on oil viscosity. Petroleum Science and Technology, 32 (19). pp. 2387-2395. ISSN 1091-6466

Harun, M. R. and Muhamad, Norhamidi and Sulong, Abu Bakar and Nor, Nor H. M. and Jamaludin, Khairur R. (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. Advanced Materials Research, 230-23 . pp. 1199-1203. ISSN 1022-6680

Harun, Zawati and Tze, Ching Ong and Ismail, Ahmad Fauzi (2014) Simulation of drying for multilayer membranes. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 107-115. ISSN 0127-9696

Hashemifard, S. A. and Ismail, A. F. and Matsuura, T. (2011) Effects of montmorillonite no-clay fillers on PEI mixed matrix membrane for CO2 removal. Chemical Engineering Journal, 170 (1). pp. 316-325. ISSN 1385-8947

Hashemifard, Seyed Abdollatif and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Hilal, Nidal (2014) Predicting the structural parameters of integrally skinned porous membranes. Journal of Membrane Science, 454 . pp. 451-462. ISSN 0376-7388

Hebbar, Raghavendra S. and Isloor, Arun M. and Ismail, Ahmad Fauzi (2014) Preparation of antifouling polyetherimide/hydrolysed PIAM blend nanofiltration membranes for salt rejection applications. RSC Advances, 4 (99). pp. 55773-55780. ISSN 2046-2069

Hee, Lim Meng and Leong, M. S. (2012) Experimental study of dynamic responses of casing deflection profile for blade rubbing classification. Journal of Vibroengineering, 14 (4). pp. 1668-1680. ISSN 1392-8716

Hussain, M. S. (2012) Direct NI-CO alloy plating of titanium alloy surfaces by high speed electrodeposition. Transactions Of The Institute Of Metal Finishing, 90 (1). pp. 15-19. ISSN 0020-2967

Ibrahim, M. H. I. (2011) Optimization of micro metal injection molding ss 316l for the highest green strength by using Taguchi Method. Advanced Materials Research, 264-26 . pp. 135-140. ISSN 1022-6680

Idris, Jamaliah and Salim, Farid and Suliman, Zahrulail and Osman, Edynoor (2003) Kajian sifat kehausan dan kekerasan komposit matriks aluminium. Jurnal Teknologi A (38A). pp. 11-24. ISSN 0127-9696

Idroas, Mariani and Nordin, Nordiana and Zakaria, Zainal and Ibrahim, Muhammad Nasir (2014) Tomographic image reconstruction of monitoring flaws on gas pipeline based on reverse ultrasonic tomography. 2014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014 - Proceedings .

Ilbeygi, Hamid and Ghasemi, Mostafa and Emadzadeh, Daryoush and Ismail, Ahmad Fauzi and Zaidi, S. M. Javid and Jaafar, Juhana and Martin, Darren and Keshani, Samaneh (2014) Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell. International Journal of Hydrogen Energy, 40 (1). pp. 477-487. ISSN 0360-3199

Ilbeygi, Hamid and Mayahi, Alireza and Ismail, Ahmad Fauzi and El Sayed Nasef, Mohamed Mahmoud and Jaafar, Juhana and Ghasemi, Mostafa and Matsuura, Takeshi and Zaidi, Syed Mohammad Javed (2014) Transport properties of SPEEK nanocomposite proton conducting membranes: optimization of additives content by response surface methodology. Journal of the Taiwan Institute of Chemical Engineers, 45 (5). p. 2279. ISSN 1876-1070

Ismail, A. S. I. and Ismail, I. and Peng, Buah W. A. P. and Piroozian, A. (2011) The effect of matrix acidizing on the compressive strength of sandstone formation. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 175-191. ISSN 0127-9696

Ismail, Ahmad Fauzi (2014) Synthesis and preparation of asymmetric PSf/ZIF-8 mixed matrix membrane for CO2/CH4 separation. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 73-76. ISSN 0127-9696

Ismail, Ahmad Fauzi and Goh, P. S. (2014) The role and prospect of nanomaterials in polymeric membrane for water and wastewater treatment: a state-of-the-art overview. Advanced Materials Research, 896 . pp. 3-6. ISSN 1022-6680

Ismail, Ahmad Fauzi and Isloor, Arun M. and Hebbar, Raghavendra S. (2014) Preparation and evaluation of heavy metal rejection properties of polyetherimide/porous activated bentonite clay nanocomposite membrane. RSC Advances, 4 (88). p. 47248. ISSN 2046-2069

Ismail, Ahmad Fauzi and Isloor, Arun M. and Kumar, Rajesha (2014) Preparation and evaluation of heavy metal rejection properties of polysulfone/chitosan, polysulfone/N-succinyl chitosan and polysulfone/N-propylphosphonyl chitosan blend ultrafiltration membranes. Desalination, 350 . pp. 102-108. ISSN 0011-9164

Ismail, Ahmad Fauzi and Isloor, Arun M. and Shenvi, Seema (2014) Preparation and characterization study of PPEES/chitosan composite membrane crosslinked with tripolyphosphate. Desalination, 344 . pp. 90-96. ISSN 0011-9164

Ismail, Ahmad Fauzi and Rahmati, Mohammad Mehdi Montazer and Rezakazemi, Mashallah and Amooghin, Abtin Ebadi and Takeshi, Matsuura (2014) State-of-the-art membrane based CO2 separation using mixed matrix membranes (MMMs): an overview on current status and future directions. Progress in Polymer Science, 39 (5). pp. 817-861.

Ismail, Ahmad Fauzi and Rezaei, M. and Hashemifard, S. A. and Matsuura, T. (2014) Preparation and characterization of PVDF-montmorillonite mixed matrix hollow fiber membrane for gas-liquid contacting process. Chemical Engineering Research and Design, 92 (11). pp. 2449-2460. ISSN 0263-8762

Ismail, Issham and Misnan, Shahir and Izwan Ismail, Ahmad Shamsul and Mohsin, Rahmat (2014) Pressure drop and water holdup of Malaysian crude oil and water two-phase flow in pipes. Advanced Materials Research, 931-93 . pp. 1248-1252. ISSN 1022-6680

Izman, Sudin and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Nazim, E. M. and Low, Yik Kuan and Eng, Kean Khor (2011) Effect of pickling process on adhesion strength of Ti oxide layer on titanium alloy substrate. Advanced Materials Research, 146-14 . pp. 1621-1630. ISSN 1022-6680

Jaafar, Juhana and Ismail, Ahmad F. and Matsuura, Takeshi and Othman, Mohd Hafiz Dzarfan and Rahman, Mukhlis A. and Yusof, Norhaniza and Lau, W. J. (2014) Preparation of high performance SPEEK/Cloisite 15A nanocomposite membrane via advanced membrane formulation method. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 93-96. ISSN 0127-9696

Jamaludin, Khairur R. and Muhamad, Norhamidi and Rahman, M. N. Ab. and Ahmad, S. and Ibrahim, Mohd. H. I. and Nor, Nor H. M. and Harun, M. R. and Daud, M. Y. M. (2011) Multiple performance optimization for the best metal injection molding green compact. Journal of Applied Sciences, 11 (9). pp. 1663-1667. ISSN 1812-5654

Junoh, Hazlina and Jaafar, Juhana and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis (2014) Polymer based membrane electrospun fiber in fuel cell application: a short review. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 77-81. ISSN 0127-9696

Jyothi, M. S. and Nayak, V. and Padaki, M. and Geetha Balakrishna, R. and Ismail, Ahmad Fauzi (2014) The effect of UV irradiation on PSf/TiO2 mixed matrix membrane for chromium rejection. Desalination, 354 . pp. 189-199. ISSN 0011-9164

Kasmani, R. M. and Andrews, G. E. and Phylaktou, H. N. (2011) The influence of vessel volume and equivalence ratio in vented gas explosions. Jurnal Teknologi, 56 (1). pp. 155-164. ISSN 0127–9696

Korminouri, Fatemeh and Rahbari-Sisakht, M. and Rana, D. and Matsuura, T. and Ismail, Ahmad Fauzi (2014) Study on the effect of air-gap length on properties and performance of surface modified PVDF hollow fiber membrane contactor for carbon dioxide absorption. Separation and Purification Technology, 132 . pp. 601-609. ISSN 1383-5866

Lai, Soon Onn and Chong, Kok Chung and Lee, K. M. and Lau, Woei Jye and Ooi, B. S. (2014) Characteristic and performance of polyvinylidene fluoride membranes blended with lithium chloride in direct contact membrane distillation. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 93-97. ISSN 0127-9696

Lau, Woei Jye and Goh, P. S. and Ismail, Ahmad Fauzi and Lai, Soononn (2014) Ultrafiltration as a pretreatment for seawater desalination: a review. Membrane Water Treatment, 5 (1). pp. 15-29. ISSN 2005-8624

Lau, Woei Jye and Ismail, Ahmad Fauzi and Goh, Pei Sean (2014) Preparation and characterization of PVDF-Tio2 composite membranes blended with different Mw of PVP for oily wastewater treatment using submerged membrane system. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 53-56. ISSN 0127-9696

Lau, Woei Jye and Sarobo, Zulaikha and Ismail, Ahmad Fauzi and Jaafar, Jafariah (2014) Treatment of restaurant wastewater using ultrafiltration and nanofiltration membranes. Journal of Water Process Engineering, 2 . pp. 58-62. ISSN 2214-7144

Manakor, Krishnan and Jamil, Siti Munira and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi (2014) Effect of sintering aid on CGO electrolyte for the fabrication of low cost, structural-controlled solid oxide fuel cell. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 33-39. ISSN 0127-9696

Mansoor, Zoveidavianpour (2014) A comparative study of artificial neural network and adaptive neurofuzzy inference system for prediction of compressional wave velocity. Neural Computing & Applications, 25 (5). pp. 1169-1176. ISSN 0941-0643

Mansourizadeh, Amir and Aslmahdavi, Z. and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2014) Blend polyvinylidene fluoride/surface modifying macromolecule hollow fiber membrane contactors for CO2 absorption. International Journal of Greenhouse Gas Control, 26 . pp. 83-92. ISSN 1750-5836

Md. Nordin, Nik Abdul Hadi and Ismail, Ahmad Fauzi and Mustafa, Azeman and Goh, Peisean S. and Rana, D. and Matsuura, Takeshi (2014) Aqueous room temperature synthesis of zeolitic imidazole framework 8 (ZIF-8) with various concentrations of triethylamine. RSC Advances, 4 (63). pp. 33292-33300. ISSN 2046-2069

Misdan, Nurasyikin and Lau, Woei Jye and Ismail, Ahmad Fauzi and Matsuura, T. and Rana, D. (2014) Study on the thin film composite poly(piperazine-amide) nanofiltration membrane: impacts of physicochemical properties of substrate on interfacial polymerization formation. Desalination, 344 . pp. 198-205. ISSN 0011-9164

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan (2011) Characterization of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan (2011) Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Mohamed Bazin, Maisarah and Zaidan, Nurhanna and Ahmat, Muhd. Amirudin and Ismail, Ahmad Fauzi and Ahmad, Norhayati (2014) Effect of starch addition on microstructure and strength of ball clay membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 117-120. ISSN 0127-9696

Mohamed Rashid, Norhana and Li, Xuyang and Kishi, Naoki and Soga, Tetsuo (2014) Synthesis of iron oxide nanoflakes at lower temperature by air oxidation of iron foils. Japanese Journal of Applied Physics, 53 (11). ISSN 0021-4922

Mohammadain, Erfan and Shirazi, Mohammad Amin and Parak, Mahdi and Idris, Ahmad Kamal and Junin, Radzuan (2011) Improved oil recovery by application of ultrasonic stimulated waterflooding. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 123-138. ISSN 0127-9696 (Print); 2180-3722 (Online)

Mohd. Ghazali, N. and Fa, L. K. (2016) Numerical simulation of flow surrounding a thermoacoustic stack:single-stack against double-stack plate domain. Jurnal Teknologi, 78 (8-4). pp. 119-125. ISSN 0127-9696

Mohd. Kasim, Abdul Rahman and Mohammad, Aurangzaib N. F. (2012) Natural convection boundary layer flow of a viscoelastic fluid on solid sphere with newtonian heating. World Academy of Science, 64 . pp. 53-58. ISSN 2010-376X

Mohd. Kasmani, Rafiziana and Andrews, G. E. and Phylaktou, H. N. and Willacy, S. K. (2009) Vented gas explosion in a cylindrical vessel with a relief pipe. Jurnal Teknologi (Kejuruteraan) (51F). pp. 53-65. ISSN 0127-9696

Mohd. Rasidek, N. A. and Mad Nordin, M. F. and Yusof, Y. A. and Tokuyama, H. and Nagatsu, Y. (2018) Effect of temperature on rheology behaviour of banana peel pectin extracted using hot compressed water. Jurnal Teknologi, 80 (3). pp. 97-103. ISSN 0127-9696

Mohsin, Rahmat and Abdul Majid, Zulkifli and Yusoff, M. Z. (2014) Safety distance between underground natural gas and water pipeline facilities. Reliability Engineering and System Safety, 131 . pp. 53-60. ISSN 0951-8320

Mokhtar, N. M. and Lau, Woei Jye and Ismail, A. F. (2014) The potential of membrane distillation in recovering water from hot dyeing solution. Journal of Water Process Engineering, 2 . pp. 71-78. ISSN 2214-7144

Motasemi, Farough and Afzal, Muhammad Tayyub and Salema, Arshad Adam and Moghavvemi, Mahmoud and Shekarchian, Mozaffar and Zarifi, F. and Mohsin, Rahmat (2014) Energy and exergy utilization efficiencies and emission performance of Canadian transportation sector, 1990-2035. Energy, 64 . pp. 355-366. ISSN 0360-5442

Muhammad Kamran, Muhammad Kamran and Ridho Kresna Wattimena, Ridho Kresna Wattimena and Armaghani, Danial Jahed and Asteris, Panagiotis G. and Jiskani, Izhar Mithal and Mohamad, Edy Tonnizam (2023) Intelligent based decision-making strategy to predict fire intensity in subsurface engineering environments. Process Safety and Environmental Protection, 171 (NA). pp. 374-384. ISSN 0957-5820

Naim, Rosma and Ismail, Ahmad Fauzi and Cheer, Ng Be and Abdullah, Mohd. Sohaimi (2014) Polyvinylidene fluoride and polyetherimide hollow fiber membranes for CO2 stripping in membrane contactor. Chemical Engineering Research and Design, 92 (7). pp. 1391-1398. ISSN 0263-8762

Nasri, Noor Shawal and Hamza, Usman Dadum and Ismail, Siti N and Ahmed, Murtala Musa and Mohsin, Rahmat (2014) Assessment of porous carbons derived from sustainable palm solid waste for carbon dioxide capture. Journal of Cleaner Production, 71 . pp. 148-157. ISSN 0959-6526

Nasri, Noor Shawal and Jibril, Mohammed and Ahmad Zaini, Muhammad Abbas and Mohsin, Rahmat and Dadum, Hamza Usman and Musa, Ahmed Murtala (2014) Synthesis and characterization of green porous carbons with large surface area by two step chemical activation with KOH. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 25-28. ISSN 2180-3722

Nur, Hadi and Abdul Rahman, Norizah and Endud, Salasiah and Lim, Kheng Wei (2007) Thermal stability of conductivity of composite comprising polyaniline and MCM-41. Malaysian Polymer Journal, 2 (2). pp. 12-21. ISSN 1823-7789

Pereira, Valeen Rashmi and Isloor, Arun M. and Bhat, Udaya and Ismail, Ahmad Fauzi (2014) Preparation and antifouling properties of PVDF ultrafiltration membranes with polyaniline (PANI) nanofibers and hydrolysed PSMA (H-PSMA) as additives. Desalination, 351 . pp. 220-227. ISSN 0011-9164

Rahbari-Sisakht, M. and Rana, D. and Matsuura, T. and Emadzadeh, D. and Padaki, M. and Ismail, Ahmad Fauzi (2014) Study on CO2 stripping from water through novel surface modified PVDF hollow fiber membrane contactor. Chemical Engineering Journal, 246 . pp. 306-310. ISSN 1385-8947

Rahbari-Sisakht, Masoud and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, Takeshi (2013) Carbon dioxide stripping from diethanolamine solution through porous surface modified PVDF hollow fiber membrane contactor. Journal of Membrane Science, 427 . pp. 270-275. ISSN 0376-7388

Rahbari-Sisakht, Masoud and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, Takeshi and Emadzadeh, Daryoush (2013) Carbon dioxide stripping from water through porous polysulfone hollow fiber membrane contactor. Separation and Purification Technology, 108 . pp. 119-123. ISSN 1383-5866

Rahmani, Omeid and Tyrer, Mark and Junin, Radzuan (2014) Calcite precipitation from by-product red gypsum in aqueous carbonation process. RSC Advances, 4 (85). pp. 45548-45557. ISSN 2046-2069

Roslan, Shairatul Akma and Yakub, Fitri and Rambat, Shuib and Munawwarah, Sharifah and Saidin, Mokhtar and Liana, Farah and Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Mohammad, Ahmad Faiz (2023) The novel method in validating the spectral wavelength optimization to determine archaeological proxies by the integration of aerial and ground platforms. Journal of Advanced Research in Applied Mechanics, 108 (1). pp. 1-15. ISSN 2289-7895

Rosli, Siti Erlyane and Mohd. Norddin, Muhammad Noorul Anam and Jaafar, Juhana and Sudirman, Rubita (2014) Study of the variation of catalyst loading in cathode for SPEEK/CSMM membrane in direct methanol fuel cell (DMFC). Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 57-60. ISSN 0127-9696

Samsuri, Ariffin and Omeiza, Aliu Abdulmumin (2014) Viscoelastic surfactants application in hydraulic fracturing, it's set back and mitigation - an overview. ARPN Journal of Engineering and Applied Sciences, 9 (1). pp. 25-29. ISSN 1819-6608

Samsuri, Ariffin (1992) A review of modelling as a tool in charge-gun performance and casing damage studies. Buletin FKKKSA, 6(1) (4-9). ISSN 0128-0740

Samsuri, Ariffin (1992) Penetration depth consideration for better perforation performance. Buletin FKKKSA, 6(2) . pp. 4-11. ISSN 0128-0740

Samsuri, Ariffin (1991) Stress around perforation. Buletin FKKKSA, 5 (2). pp. 13-23. ISSN 0128-0740

Samsuri, Ariffin and Chuong, Pham Vu (2004) Optimize production through reservoir rock compaction control. Jurnal Teknologi, 31(F): 31-43 , Universiti Teknologi Malaysia .

Sarip, A. R. and Musa, Md. Nor (2013) Friction analysis on vane of an existing and of a novel multi-vane rotary compressor. Applied Mechanics and Materials, 284-28 . pp. 763-767. ISSN 1662-7482

Saud, Safaa Najah and Hamzah, Esah Binti and Abubakar, Tuty Asma Abu and Bakhsheshi-Rad, Hamid Reza (2015) Thermal aging behavior in Cu-Al-Ni-xCo shape memory alloys. Journal of Thermal Analysis and Calorimetry, 119 (2). pp. 1273-1284. ISSN 1388-6150

Shawal Nasri, Noor and Jibril, Mohammed and Ahmad Zaini, Muhammad Abbas and Mohsin, Rahmat and Dadum, Hamza Usman and Musa, Ahmed Murtala (2014) Synthesis and characterization of bio-based porous carbons by two step physical activation with Co2. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 5-9. ISSN 2180-3722

Sulaiman, S. Z. and Md. Kasmani, Rafiziana and Kiah, M. H. M. and Kidam, K. and Hassim, M. H. and Ibrahim, N. and Ali, R. R. (2014) The influence of 90 degree bends in closed pipe system on the explosion properties using hydrogen-enriched methane. Chemical Engineering Transactions, 36 . pp. 271-276. ISSN 1974-9791

Supee, Aizuddin and Idris, Ahmad Kamal (2014) Effects of surfactant-polymer formulation and salinities variation towards oil recovery. Arabian Journal For Science and Engineering, 39 (5). pp. 4251-4260. ISSN 1319-8025

Supee, Aizuddin and Mohsin, Rahmat and Abdul Majid, Zulkifli and Raiz, Mohd. Izzat (2014) Effects of compressed natural gas (CNG) injector position on intake manifold towards diesel-CNG dual fuel (DDF) engine performance. Jurnal Teknologi (Sciences and Engineering), 70 (1). pp. 107-115. ISSN 0127-9696

Wan Azli, A. and Nur Zulaikha, Y. (2011) Production of pigments from bacteria grown in solid and liquid pineapple waste. Acta Horticulturae, 902 . pp. 415-422. ISSN 0567-7572

Wan Salleh, Wan Norharyati and Isa, N. A. I. M. and Sazali, Norazlianie and Ismail, Ahmad Fauzi (2014) Preparation and characterization of matrimid-based carbon membrane supported on tube for CO2 separation. Advanced Materials Research, 1025-1 . pp. 770-775. ISSN 1022-6680

Wan Salleh, Wan Norharyati and Mohamed, Mohamad Azuwa and Jaafar, Juhana and Yusof, Norhaniza (2014) Preparation and photocatalytic activity of mixed phase anatase/rutile TiO2 nanoparticles for phenol degradation. Jurnal Teknologi (Sciences and Engineering), 70 (2). pp. 65-70. ISSN 0127-9696

Yaacob, Zulkefli and Mohsin, Rahmat and Chua, Yeu Jen (2008) Stress study on natural gas piping system using computer aided engineering simulator. Jurnal Teknologi (49F). pp. 357-366. ISSN 0127-9696

Yahya, M. Yazid and Cantwell, W. J. and Langdon, G. S. and Nurick, G. N. (2008) The blast behaviour of fiber reinforced thermoplastic laminates. Journal of Composite Materials, 42 (21). pp. 2275-2297. ISSN 1530-793X

Yunos, Muhamad Zaini and Harun, Zawati and Basri, Hatijah and Ismail, Ahmad Fauzi (2014) Studies on fouling by natural organic matter (NOM) on polysulfone membranes: effect of polyethylene glycol (PEG). Desalination, 333 . pp. 36-44. ISSN 0011-9164

Zaini, Nabilah and Nor Kamarudin, Khairul Sozana (2014) Adsorption of carbon dioxide on monoethanolamine (MEA)-impregnated kenaf core fiber by pressure swing adsorption system (PSA). Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 11-16. ISSN 2180-3722

Zohreh, Movahed and Junin, Radzuan and Jeffreys, Peter (2014) Evaluate the borehole condition to reduce drilling risk and avoid potential well bore damages by using image logs. Journal of Petroleum Science and Engineering, 122 . pp. 318-330. ISSN 0920-4105

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2013) The clean up of asphaltene deposits in oil wells. Energy Sources Part A-Recovery Utilization and Environmental Effects, 35 (1). pp. 22-31. ISSN 1556-7036

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2012) Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir. Society Of Petroleum Engineers - Spe Oil And Gas India Conference And Exhibition 2012, Ogic - Further, Deeper, Tougher: The Quest Continues... . pp. 148-172.

Zulhairun, Abdul Karim and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Abdullah, Mohd. Sohaimi and Mustafa, Azeman (2014) Asymmetric mixed matrix membrane incorporating organically modified clay particle for gas separation. Chemical Engineering Journal, 241 . pp. 495-503. ISSN 1385-8947

Zulhairun, Abdul Karim and Ismail, Ahmad Fauzi and Mustafaa, A. (2014) Asymmetric polysulfone-cloisite 15A® nanocomposite membrane for gas separation. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 61-65. ISSN 0127-9696

Book Section

Karis, Mohd. Safirin and Mohomed, Mutaz and Elsawi, Elhassan and Najafzadeh, Nazila and Sulaiman, Siti Fatimah and Abdul Rahim, Ruzairi and Zakaria, Zulkarnay (2011) Detect ore bodies from the air and distinguish between different ores. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 57-80. ISBN 978-967-354-185-0

Mohd. Muji, Siti Zarina and Tajdari, Temour and Abdul Rahim, Ruzairi and Rahmat, Mohd. Fua'ad (2011) Gravity flow rig operation in control lab, FKE, UTM. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 177-182. ISBN 978-967-354-185-0

Conference or Workshop Item

Azdarpou, Amin and Rahmani, Omeid and Junin, Radzuan and Yeop, Mohammad Ashrafunnur (2013) Use of olivine for carbon dioxide mineral sequestration. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium, 7-9 April 2013, Langkawi, Malaysia.

Anuar, S. M. M. and Jaafar, M. Z. and Jaafar, M. Z. and Sulaiman, W. R. W. and Ismail, A. R. (2013) Monitoring water alternate gas (WAG) process using streaming potential measurement. In: Society of Petroleum Engineers - SPE Enhanced Oil Recovery Conference, EORC 2013: Delivering the Promise NOW!.

Aris, Azmi and Puteh, Mohd. Hafiz and Darwish, Mohamad S. (2015) Chemical phosphorus recovery from waste fish bones ash by acidic leaching. In: International Conference on Advances in Civil and Environmental Engineering 2015, 28-30 Jul, 2015, Pulau Pinang, Malaysia.

Darlis, Nofrizalidris and Shafii, Nadia Shaira and Dillon, Jeswant and Osman, Kahar and Md. Khudzari, Ahmad Zahran (2015) Novel straight type aortic cannula with spiral flow inducing design. In: Applied Mechanics and Materials, 2015.

Irawan, Sonny and Samsuri, Ariffin (2006) Utilization of treated Malaysian local bentonite for drilling mud material cost saving. In: ISME-IX (9th. International Symposium on Mineral Exploration), 19 - 21 September 2006, Institute of Technology Bandung, Indonesia.

Ismail, Ahmad Fauzi and Goh, P. S. (2013) The role and prospect of nanomaterials in polymeric membrane for water and wastewater treatment: a state-of-the-art overview. In: International Conference on Advanced Materials Science and Technology, ICAMST 2013, 17-18 Sep, 2013, Yogyakarta, Indonesia.

Jaafar, Mohd. Zaidi and Ismail, Abdul Razak and Saharuddin, Mohamad Kamil and Mohd. Anuar, Siti Mardhiah and Suradi, Siti Rahmah and Omar, Shaziera (2015) Measurement of thermoelectric potential coupling coefficient for sandstone rock sample. In: Applied Mechanics and Materials, 26-27 Nov, 2014, Kuala Lumpur, Malaysia.

Jaafar, Mohd. Zaidi and Mohammed Seed Ahmed, Talha Abdelhafeez and Wan Sulaiman, Wan Rosli and Lebai Ismail, Abdul Razak (2015) Reservoir monitoring using streaming potential; is the thermoelectric correction necessary? In: SPE Reservoir Characterization and Simulation Conference and Exhibition, 14-16 Sept, 2015, Abu Dhabi, UAE.

Lias, Marina and Kuwano, Noriyuki (2015) Electron microscpy study of deformation and recrystallization behavior of pure tin for mitigation of whiskers. In: Malasia-Japan Joint International Conference, 13-15 Nov, 2015, Japan.

Man, Sarimah and Junin, Radzuan and Samsuri, Ariffin and Mohamed Osman, Adil (2000) Properties study of a local bentonite as an additive in oil and gas industry. In: AMER 2000, 4-5 October 2000, UiTM, Shah Alam, Selangor.

Md. Daud, Mohd. Yusof and Lucas, Margaret and Jamaludin, Khairur Rijal and Anis, Samsol Faizal (2010) Analysis of surface deformation under static and ultrasonic compression of aluminium. In: Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010, Pulau Pinang, Malaysia.

Nordin, Nordiana and Idroas, Mariani and Zakaria, Zainal and Ibrahim, Muhammad Nasir (2014) Tomographic image reconstruction of monitoring flaws on gas pipeline based on reverse ultrasonic tomography. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014, 3-5 June, 2014, Kuala Lumpur, Malaysia.

Omar, S. and Jaafar, M. Z. and Ismail, A. R. and Sulaiman, W. R. W. (2013) Monitoring foam stability in foam assisted water alternate gas (FAWAG) processes using electrokinetic signals. In: Society Of Petroleum Engineers - SPE Enhanced Oil Recovery Conference, Eorc 2013: Delivering The Promise Now!.

Samsuri, Ariffin (1992) Contribution of collapse perforation to the production of loose sand in the wellbore. In: 9th Offshore South East Asia Conference , 1-4 December 1992, Singapore.

Samsuri, Ariffin (1997) The application of palm oil fly ash in improving a petroleum well cement characteristics. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Samsuri, Ariffin and Abdullah, Habiburrohman and Leyong, Kien Ping (2001) Preliminary study of local bentonite treatments for oil and gas industry. In: Malaysian Science & Technology Congress 2001, 8-10 October 2001, Melaka.

Samsuri, Ariffin and Herianto, Herianto (2004) Comparison of sandstone Mechanic properties using acoustic test and direct uniaxial test. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Ipoh, Perak, Malaysia.

Samsuri, Ariffin and Herianto, Herianto (2005) The effect of grain size distributions on acoutic wave velocities in porous rocks. In: 8th. International Conference on Quality in Research (QIR), 9 - 10 April 2005, Inuversitas Indonesia, Jakarta, Indonesia.

Samsuri, Ariffin and Herianto, Herianto and Setyowiyoto, Jarot (2004) Petrophyscis study of sandstone core to the accuracy of ultrasonic pulse velocity. In: 18th. Symposium of Malaysia Chemical Engineers (SOMChe), 2004, 13 - 14 Dec. 2004, UTP, Ipoh, Perak, Malaysia.

Samsuri, Ariffin and Junin, R. and Osman, A. M. (2001) The utilization of Malaysian local bentonite as an extender and free water controller in oil-well cement technology. In: SPE Asia Pacific Oil & Gas Conference and Exhibition in Indonesia, Jakarta, Indonesia, 17-19 April 2001., 17 - 19 April 2001, Jakarta, Indonesia.

Samsuri, Ariffin and Leyong, K. P. and Abdullah, H. (2003) Potential of an andrassy and mansuli bentonite as a drilling mud material. In: SPE Asia Pacific Oil & Gas Conference & Exhibition, 15-17 April 2003, Jakarta, Indonesia.

Samsuri, Ariffin and Phuong, B. T. N. (2002) Cheaper cement formulation for lost circulation control. In: Fourth Biennial Asia Pacific Drilling Technology Conference (APDT 2002), 9-11 September 2002, Jakarta, Indonesia., 9 - 11 September 2002, Jakarta, Indonesia.

Samsuri, Ariffin and Sim, S. H. and Tan, C. H. (2003) An Integrated Sand Control Method Evaluation. In: SPE Asia Pacific Oil and Gas Conference and Exhibition, Jakarta, Indonesia, 15-17 April 2003, 15 - 17 April, 2003, Jakarta, Indonesia.

Samsuri, Ariffin and Sim, S. H. and Tan, C. H. (2002) An integrated simulation model for sand production prediction and sand control. In: Malaysian Science & Technology Congress 2002, 17 - 19, October 2002, Genting Highlands, Pahang.

Samsuri, Ariffin and Sim, Soon Hin (2001) Development of sand production prediction computer model. In: Malaysia Science And Technology Congress 2001, 8-10 November 2001, 8 - 10 November 2001, Universiti Sains Malaysia, Pulau Pinang.

Samsuri, Ariffin and Somerville, J. M. (1991) Perforation stability - physical and numerical modelling. In: Rock Mechanics as a Multidisciplinary Science Proceedings of the 32nd U.S. Symposium, 10-12 July 1991, The University of Oklahoma.

Samsuri, Ariffin and Abdullah, Habiburrohman (2002) Electrolysis treatment study of Sabah bentonite and its applications in petroleum industry. In: Malaysian Science & Technology Congress 2002, 17 - 19 October 2002, Genting Highlands, Malaysia.

Samsuri, Ariffin and Chuong, P. V. (2000) Minimize sand production by controlling wellbore geometry and flow rate. In: SPE International Oil and Gas Conference and Exhibition in China, Beijing, China, 7-10 November 2000, Beijing, China.

Samsuri, Ariffin and Irawan, Sonny (2003) Extraction of montmorillonite mineral iron-oxides with organic acids. In: Proceeding of Indonesian Petroleum Engineering Association (IATMI), October 2003, ITB, Bandung, Indonesia.

Samsuri, Ariffin and Kien Ping, Leyong (2002) Optimum wet treatment process for upgrading Andrassy and Mansuli bentonite and their applications in petroleum industry. In: Malaysian Science & Technology Congress 2002, 17-19 October 2002, Genting Highlands, Pahang.

Samsuri, Ariffin and Tan, C. H. (2001) Development of a performance evaluation method of mechanical sand retention techniques. In: Malaysia Science And Technology Congress 2001, 8-10 November 2001, 8 - 10 November 2001, Universiti Sains Malaysia, Pulau Pinang.

Samsuri, Ariffin and Irawan, Sonny (2004) A study of iron removal from Sabah montmorillonite by extracting with organic acid. In: Regional Conference for Yonng Chemists 2004, USM, Penang (April 2004), 13-14 April, 2004, USM, Penang, Malaysia.

Samsuri, Ariffin and Junin, Radzuan and Mohamed Osman, Adil (2000) Potential of Malaysian local bentonite applications in an oil-well cement industry. In: Regional Symposium on Chemical Engineering (RSCE 2000) Singapore, 11-13 Dec, 2000, 11 - 13 December 2000, Singapore.

Setyowiyoto, Jarot and Samsuri, Ariffin (2006) Oil water contact analysis and hydrocarbon saturation estimation based on well logging data. In: Regional Postgraduate Conference on Engineering & Science, 26 - 27 July 2006, Johor Baru, Johor.

Sonny, Irawan and Samsuri, Ariffin (2004) Removal of iron contaminant from Sabah montmorillonite using gravitational & extraction techniques. In: 18th. Symposium of Malaysian Chemical Engineers (SOMChe) 2004, Octo. 2004, UTP, Ipoh, Perak, Malaysia.

Sulaiman, S. Z. and Md. Kasmani, Rafiziana and Kiah, M. H. M. and Kidam, K. and Hassim, M. H. and Ibrahim, N. and Ali, R. R. (2014) The influence of 90 degree bends in closed pipe system on the explosion properties using hydrogen-enriched methane. In: 6th International Conference on Safety & Environment in Process & Power Industry 2014, 13-16 April, 2014, Bologna, Italy.

Wong, S. and Ooi, C. Y. and Hau, Y. W. and Marsono, M. N. and Shaikh-Husin, N. (2013) Feasible transition path generation for EFSM-based system testing. In: Proceedings - IEEE International Symposium on Circuits and Systems.

Thesis

Abdullah, Mohammad Omar (1992) Kajian penggunaan minyak dasar alternatif-metil ester sawit di dalam bendalir penggerudian dan penentuan tahap ketoksikan sistem lumpurnya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali, Jusni (1999) Penentuan angkatap spektrum tenaga 'n' bagi struktur gelora dalam sistem aliran dua fasa kerosin/air untuk paip menegak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali, Zulfiqar (2014) Performance of steel slag as replacement of natural aggregate in wearing course of flexible pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chen, Seong Sern (2003) Finite element modelling of the non-linear behaviour of rock-structure interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamzah, S. Hasila (2009) Pemencilan dan pencirian bakteria dari telaga minyak tempatan untuk penghasilan asid dan pelarut organik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasumi, Abdul Razi (1995) Effect of a regional aquifer on the performance of a group of oil and gas reservoirs in J-20 sand, Malay Basin, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Ahmad Shamsul Izwan (2014) Two phase of waxy crude oil-water in horizontal pipes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Jaapar, Jefri (2001) Bioleaching of low grade refractory gold ore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamaludin, Abdul Rahman (2001) The impact of quarrying activities nearby residential areas : a case study in Bandar Seri Alam, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jusoh, Nawawi (1991) Application of geobotanical anomalies in detecting gold occurrence areas using remote sensing techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kasmungin, Sugiatmo (2003) Penggunaan busa untuk mengawal mobiliti dalam banjiran CO2-BUSA. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Khalib, Abdul Rahim Syah (2013) Keperluan pelaksanaan kebenaran merancang bagi aktiviti perlombongan di negeri Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khamis, Nor Hisham (2005) Path reduction factor for microwave terrestrial links derived from the Malaysian meteorological radar data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lai, Thiam Chin (2003) Finite element analysis of rock compaction with capillary effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahfooz Moherei, Mazen Ahmed (2003) Cuttings transport in horizontal and highly deviated wellbores. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Malik, Mukhtar (2004) Turning modified titanium with AL2O3 coated cemented carbide (WIDIA DCMT 11304). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Man, Sarimah (2004) Kajian mineralogi dan fiziko-kimia ke atas bentonit andrassy dan mansuli, Sabah dan menilai potensinya dalam industri petroleum dan minyak sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Aziz, Shahrul Faiz (1994) Design and analysis of steeps and steep wave flexible riser systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Naidir, Ferra (2001) Kesesuaian ester metil laurik sebagai bendalir dasar lumpur gerudi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nguyen, Manh Hung (2000) The effects of some controlling parameters on gravity segregation and viscous fingering in water alternate gas (WAG) process in a first contact miscible displacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Oladapo, Omotunde Habeeb (2014) Improving book lending service in UTM Library using apriori rule-mining technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Peirovi, Soroush (2014) Cyclic strain characteristics of steel sheets under positive load ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pham, Xuan Toan (2002) A study of fractured wellbore stability. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Pratikso, Pratikso (2001) Uplift behaviour for enlarged base pier and helical anchor in sand. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajiah, Vanisha Mary J. Daniel (2002) Performance characteristics of electric ARC furnace slag concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sim , Soon Hin (2004) Finite element modelling for predicting sand production in perforation tunnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Subbiah, Surej Kumar (1998) Wellbore instability studies by physical modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Subramaniam, Parani Kumar P. (2004) Palm shell based absorbent for low presure natural gas storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Susanti, Oknovia (2004) Microstructure and mechanical properties of as-cast and heat treated Ti-48A1 intermettallic alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teow, Ket Seang (2003) The effect of eccentric drilling on formation damage to berea sandstone formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yunan, Mat Hussin (1996) Immiscible displacement studies at uniform and non-uniform wetting conditions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.