Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 4000.

Article

UNSPECIFIED (2008) Interactive framework for dynamic modelling and active vibration control of flexible structures. Jurnal Mekanikal (25). pp. 24-38. ISSN 0127-3396

Abdul Wahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Mohd. Jaafar, Mohammad Nazri and Kareem, Zaid Sattar (2015) Experimental thermal field measurements of film cooling with twisted holes. International Review of Aerospace Engineering, 8 (3). pp. 86-94. ISSN 1973-7459

A., Jawaid and S., Koksal and Sharif, S. (2000) Wear behavior of PVD and CVD coated carbide tools when face milling Inconel 718. Tribology Transactions, 43 . pp. 325-331. ISSN 1547-397X (electronic) 1040-2004 (paper)

A., Jawaid and Sharif, S. and S., Koksal (2000) Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy. Journal of Materials Processing Technology, 99 . pp. 266-274. ISSN 09240136

A. Khan, Zahid and Kamaruddin, S. and Quadir, G. A. and Suhail, A. and Seetharamu, K. N. (2005) Application of artificial neural network (AAN) for prediction of sensible and latent heat losses from a cow. Jurnal Mekanikal (20). ISSN 0127-3396

A. Mohammed, Hussein (2013) The effect of various open cell aluminium foam geometrical shapes on combined convection heat transfer with nanofluid. International Journal of Emerging Technology and Advanced Engineering, 3 (9). pp. 615-629. ISSN 2250-2459

A. Mohammed, Hussein (2013) Numerical simulation of three-dimensional supersonic flow around an aerodynamic bump. Journal of Basic and Applied Scientific Research, 3 (7). pp. 656-666. ISSN 2090-4304

A. Rasid, Zainudin and Ayob, Amran and Zahari, R. and Majid, D. L. and Rafie, A. S. M. (2011) Thermal post-buckling of shape memory alloy composite plates under non-uniform temperature distribution. World Academy of Science, Engineering and Technology, 56 . pp. 1465-1470. ISSN 2010-376X

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Azadnia, Amir Hossein and Zakuan, Norhayati (2012) A comparative study on critical success factors (CSFS) of ERP systems implementation among SMEs and large firms in developing countries. International Journal of Advancements in Computing Technology, 4 (9). pp. 226-239. ISSN 2005-80399 (Print); 2233-9337 (Electronics)

Abas, Mohd. Azman and Muhamad Said, M. F. and Zainal Abidin, Shaiful Fadzil and Zahari, Izzarief (2015) Simulation of fuel economy for Malaysian urban driving. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2306-2316. ISSN 2229-8649

Abd Kader, Ab Saman (2013) Pilot study for quantification of emissions of green house gas for decision support towards International Maritime Organization (IMO) rule making. Global Journal of Science Frontier Research Environment & Earth Science, 13 (1). pp. 19-29. ISSN 0975-5896

Abd Kader , Ab Saman (2013) Study of properties of components for offshore aquaculture technology farming. Journal of Science and Engineering, 1 (2). pp. 155-161. ISSN n/a

Abd Kader , Ab Saman (2013) Towards sustainable green ship technology. African Journal of Business Management, 7 (2). pp. 96-118. ISSN 1993-8233

Abd Rahim Abu Bakar, (2011) Disc brake squeal suppression through chamfered and slotted pad. International Journal of Vehicle Structures & Systems, 3 (1). pp. 28-35. ISSN 9753060

Abd Rani, Mat Rebi and A. R., Ismail and M. H. M., Haniff and B. M., Deros and Z. K. M., Makhbul and N. K., Makhtar (2010) The optimization of environmental factors at manual assembly worstation by using taguchi method. Journal of Applied Sciences, 10 (13). 1293 - 1299. ISSN 1812-5654

Abd Saman Abd Kader, (2011) Magneto electro co. generation power for marine auxiliary. International Journal Of Engineering , 1025-2 (4).

Abd Saman Abd Kader, (2011) Modeling of gas turbine co-propulsion engine to ecotourism vessel to improved sailing speed up to 35 knots. International Journal of Engineering, 1985-2 (4).

Abd Saman Abd Kader, (2011) Numerical modeling for marine mobile floating berthing protection facilities. International Journal of Mechanical & Mechatronics Engineering, 2077-1 (1).

Abd Saman Abd Kader, (2011) Review of potential of inland waterway hybrid transportation for sustainable transportation capability building Terengganu. Canadian Journal on Environmental, Construction and Civil Engineering, 1923-1 (2). pp. 73-83.

Abd Saman Abd Kader, (2011) Review on potential for waste recycled based bioenergy for marine system. International Jurnal Environment Technology and Management, 1741-5 (14).

Abd Saman Abd Kader, (2011) Safety and environment risk and reliability model for inland waterway collision accident frequency. International Journal of Energy and Environment, 2076-2 (5). pp. 461-477.

Abd Saman Abd Kader, (2011) Techno economic study of potential using solar energy as a supporting power supply for diesel engine for landing craft. International Journal of Business and Social Science, 2219-1 (2).

Abd Saman Abd Kader, (2011) Utilization of simulation for training enhancement. International Journal of Image Processing , 1985-2 (4).

Abd. Al-Rahman, Lamyaa and Raja, Raja Ishak and Abdul Rahman, Roslan (2012) Attenuation of noise by using absorption materials and barriers: a review. International Journal of Engineering & Technology, 2 (7). pp. 1207-1217. ISSN 2049-3444

Abd. AL-Rahman, Lamyaa and Raja Hamzah, Raja Ishak and Abdul Rahman, Roslan and Ibrahim, Zawawi (2012) Acoustic properties of innovative material from date palm fibre. American Journal of Applied Sciences, 9 (9). pp. 1390-1395. ISSN 1546-9239 (Print); 1554-3641 (Electronic)

Abd. Kader, Ab. Saman and Sulaiman, O. O. and Abdul Malik, Adi Maimun and Saharuddin, A. H. (2011) Predictive and reliability based collision risk aversion model for inland waterways: the case frequency estimation for Malaysian Langat River. Jurnal Mekanikal (32). pp. 38-60. ISSN 0127-3396

Abd. Rahim, Erween and Kamdani, Kamaruddin and Sharif, Safian (2008) Performance evaluation of uncoated carbide tool in high speed drilling of Ti6Al4V. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2 (4). pp. 522-531. ISSN 1881-3054

Abd. Rahim, Erween and Sharif, Safian (2006) Investigation of tool life and surface integrity when drilling Ti-6A1-4V and Ti-5A1-4V-Mo/Fe. JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing , 49 (2). pp. 340-345. ISSN 1347-538X

Abd. Rahim Abu Bakar, (2014) Experimental investigation of low speed disc brake judder vibration. Noise, Vibration and Comfort, 471 . pp. 25-29. ISSN 1660-9336

Abd. Rahim, Erween and Sharif, Safian (2006) Investigation on Tool Life and Surface Integrity when Drilling Ti-6Al-4V and Ti-5Al-4V-Mo/Fe. JSME International Journal Series C, 49 (2). pp. 340-345. ISSN 1344-7653

Abd. Rahman, Haliza and Bahar, Arifah and Mohd. Aziz, Mohd. Khairul Bazli and Rosli, Norhayati and Salleh, Madihah and Weber, Gerhard-Wilhelm (2009) Parameter estimation of Stochastic Logistic Model : Levenberg-Marquardt Method. Matematika, 25 (1). pp. 91-106. ISSN 0127-8274

Abd. Rahman, Roslan (2000) Control of vibration power input to semi-infinite anisotropic beam. Jurnal Mekanikal, 1 . pp. 43-59. ISSN 0127-3396

Abd. Rahman, Roslan and Tamin, Mohd. Nasir and Kurdi, Ojo (2008) Stress analysis of heavy duty truck chasis as a preliminary data for its fatigue life prediction using FEM. Jurnal Mekanikal (26). pp. 76-85. ISSN 0127-3396

Abd. Rahman, Roslan and Teo, Han Fui (2007) Statics and dynamics structural analysis of a 4.5 ton truck chassis. Jurnal Mekanikal (24). pp. 56-67. ISSN 0127-3396

Abd. Rahman, Roslan and Zubair, Mazlan and Amin, Norsham (2003) Finite element modeling, correlation and model updating of stiffened plate. Jurnal Mekanikal (16). pp. 91-106. ISSN 0127-3396

Abd. Rani, Mat Rebi and A. R., Ismail and M. Y. M., Yusof and K., Sopian and Z. K. M., Makhbul and N. K., Makhtar (2010) Optimizing humidity level and illuminance to enhance worker performance in an automotive industry. Journal of Applied Sciences, 10 (14). 1389 -1396. ISSN 1812-5654

Abd. Rani, Mat Rebi and A. R., Ismail and M. Y. M., Yusof and N. K., Makhtar and B. M., Deros (2010) Optimization of temperature level to enhance worker performance in automotive industry. American Journal of Applied Sciences, 7 (3). 360 - 365. ISSN 1546-9239

Abdelrhman A.M., (2012) A review of vibration monitoring as a diagnostic tool for turbine blade faults. Applied Mechanics and Materials, 229-23 . pp. 1459-1463. ISSN 1660-9336

Abdi, (2012) Buckling behavior of clamped laminated composite cylindrical shells under external pressure using finite element method. Applied Mechanics And Materials, 121-12 . pp. 43-47. ISSN 1660-9336

Abdi, (2012) Find the opt.Imum shape design of externally pressurized torispherical dome ends based on buckling pressure by using imperialist competitive algorithm and genetic algorithm. Applied Mechanics And Materials, 110-11 . pp. 956-964. ISSN 1660-9336

Abdi, (2012) Imperialist competitive algorithm for multiobjective optimization of ellipsoidal head of pressure vessel. Applied Mechanics And Materials, 110-11 . pp. 3422-3428. ISSN 1660-9336

Abdi, (2012) Optimum size of a ground-based cylindrical liquid storage tank under stability and strength constraints using imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 3415-3421. ISSN 1660-9336

Abdi, (2012) Thermal effect on buckling of general dome ends using finite element method. Applied Mechanics And Materials, 121-12 . pp. 340-345. ISSN 1660-9336

Abdi, B. and Mozafari, H. and Ayob, Amran (2011) Buckling behavior of general dome ends under external pressure, using finite element analysis. Key Engineering Materials, 471-47 . pp. 833-838. ISSN 1662-9795

Abdi, B. and Mozafari, H. and Ayob, Amran and Kohandel, R. (2011) Imperialist competitive algorithm and its application in optimization of laminated composite structures. European Journal of Scientific Research, 55 (2). pp. 174-187. ISSN 1450-216X

Abdi B., (2012) Effect of strain-rate on flexural behavior of composite sandwich panel. Applied Mechanics and Materials, 229-23 . pp. 766-770. ISSN 1660-9336

Abdi B., (2012) Multi-objective optimization of filament wound composite pressure vessels based on weight and matrix cracking/ burst pressure using imperialist competitive algorithm. Applied Mechanics and Materials, 234 . pp. 34-38. ISSN 1660-9336

Abdolahi, Ahmad and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Synthesis of uniform polyaniline nanofibers through interfacial polymerization. Materials, 5 (8). pp. 1487-1494. ISSN 1996-1944

Abdul Awal, Ziad and Ammoo, Mohd. Shariff (2014) A case study on the air flow characteristics of the Hirobo-FALCON 505 controllable helicopter's main rotor blade. Applied Mechanics and Materials, 527 . pp. 39-42. ISSN 1660-9336

Abdul Aziz, Azhar and Lim, Chon Wei (2005) Development and performance evaluation of a prototype electric hybrid powertrain system for automotive applications. The Journal of The Institution of Engineers, Malaysia, 66 (1). pp. 73-80. ISSN 0126-513X

Abdul Aziz, Azhar and A. Latiff, Z. and M. Ali, M. F. and M. Said , M. F. (2006) Retrofitting of auxiliary components to enhance the performance of a single-cylinder, air-cooled gasoline two-stroke engine. Jurnal Mekanikal (22). pp. 53-63. ISSN 0127-3396

Abdul Ghani, Badri and El-Shayeb, Mohamed and Lie, T. T. (1996) Experimental verification of column at extreme temperature. Jurnal Mekanikal, 2 (2). pp. 35-51. ISSN 0127-3396

Abdul Ghani, Badri and El-Shayeb, Mohamed and Lie, T. T. (1996) Heat transfer and strength analysis of column at extreme temperature. Jurnal Mekanikal, 2 (2). pp. 16-34. ISSN 0127-3396

Abdul Ghani, Mohamad Pauzi and Abdul Rahim, M. N. (2008) The prediction of wake wash in the towing tank. Jurnal Mekanikal (26). pp. 129-140. ISSN 0127-3396

Abdul Ghani, Mohamad Pauzi and Julait, J. (2008) Prediction of added resistance of ship due to regular head waves. Jurnal Mekanikal (26). pp. 1-8. ISSN 0127-3396

Abdul Hamid, M. F and S., Li and Basaran, C. (2008) Thermomigration in lead-free solder joints. International Journal of Materials and Structural Integrity, 2 (1-2). pp. 11-34. ISSN 1745-0055

Abdul Hamid, Mohd. Kamiel and Stachowiak, G. W. (2009) Effect of hard particle grift size on friction coefficents and embedment of automotive braking system. Jurnal Mekanikal (29). pp. 1-18. ISSN 0127-3396

Abdul Hamid M.K., (2011) The effects of grit particle size on frictional characteristics of automotive braking system. Advanced Materials Research, 189-19 . pp. 3511-3516. ISSN 1022-6680

Abdul Hassan, Shukur and Ismail, Yob Saed and Sam, Abdulrahman and Abu Hanan, Umar and Wahit, Mat Uzir (2015) Shear property of structural epoxy adhesive exposed to tropical weathering condition. Jurnal Teknologi, 77 (8). pp. 83-90. ISSN 0127-9696

Abdul Jalil, Aishah and Triwahyono, Sugeng and Zainal Abidin, Mahani A. and Hazirah Adam, S. and Nazirah Kamarudin, N. H. (2011) Recovery of gold(III) from an aqueous solution onto a durio zibethinus husk. Biochemical Engineering Journal, 54 (2). pp. 124-131. ISSN 1369-703X

Abdul Kadir, Aini Zuhra and Xua, Xun and Hämmerle, Enrico (2010) Virtual machine tools and virtual machining-a technological review. Robotics and Computer-Integrated Manufacturing, 27 (3). pp. 494-508. ISSN 0736-5845

Abdul Kadir, Aini Zuhra and Xun, Xu (2011) Towards high-fidelity machining simulation. Journal of Manufacturing Systems, 30 (3). pp. 175-186. ISSN 0278-6125

Abdul Kadir, Mohammed Rafiq and Hansen, Ulrich N. (2007) The effect of physiological load configuration on interface micromotion in cementless femoral stems. Jurnal Mekanikal (23). pp. 50-61. ISSN 0127-3396

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Idrose, Al Hamzee (2010) Biomechanics of a lumbar section after disc arthroplasty. European Journal of Scientific Research, 39 (1). 22-28.

Abdul Kadir, Mohammed Rafiq and Ochsner, Andreas and A., Syahrom (2010) Finite element analysis of idealised unit cell cancellous structure based on morphological indices of cancellous bone. Medical & Biological Engineering & Computing, 48 (5). 497 - 505. ISSN 0140-0118

Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Suptiyano, Bambang and Said, Mazlan (2008) Viability study of ethylene (C2H4) as an alternative fuel for gasoline engine. Jurnal Mekanikal (26). pp. 151-161. ISSN 0127-3396

Abdul Malik, Adi Maimun and Mansor, Shuhaimi and Che Sidik, Nor Azwadi (2013) Design parametric study of a compound wing in ground effect. part 1: aerodynamics performance. Journal of Aerospace Engineering . ISSN 0893-1321

Abdul Rahim, Abd. Rahman and Nabi Baksh, Mohd. Shariff (2003) Case study method for new product development in engineer to order organisations. Work Study, 52 (1). pp. 25-36. ISSN 0043-8022

Abdul Rahim, Nurul Ataillah and Ahmad, Robiah (2010) Biomechanical study and analysis on human motion using piezoelectric sensor for scavenging energy. Jurnal Mekanikal (31). pp. 30-45. ISSN 0127-3396

Abdul Rahim Abu Bakar, (2014) Influence of silica sand particles on disc brake squeal noise. Noise, Vibration and Comfort, 471 . pp. 81-85. ISSN 1660-9336

Abdul Rahim Abu Bakar, (2014) Modeling of thermal contact problem of disc brake system with frictional heat generation. World Journal of Engineering, 11 (4). pp. 373-390. ISSN 0043-1648

Abdul Rahim Abu Bakar, (2014) Numerical modeling of disc brake system in frictional contact. Tribology in Industry, 36 (1). pp. 49-66. ISSN 0354-8996

Abdul Rahim Yacob, (2012) Phosphoric acid effect on prepared activated carbon from Saudi Arabia's date frond waste. Applied Mechanics And Materials, 110-11 . pp. 2124-2130. ISSN 1660-9336

Abdul Raman, Norazmein and Jamaludin, Khairur Rijal Implementing Toyota Production System (TPS) concept in a small automotive parts manufacturer. ICME 2008 . (Unpublished)

Abdul Raman, Noor Azah and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Ani, Farid Nasir (2015) A review on the application of bio-oil as an additive for asphalt. Jurnal Teknologi, 72 (5). pp. 105-110. ISSN 0127-9696

Abdul Razak, Ariffin (1991) The integration of design and manufacturing using a design-with-features approach for turned components. Jurnal Teknologi, 18 . pp. 65-73. ISSN 2180-3722

Abdul Wahid, Mazlan and Ujir, Mohd Hafis and B, Azwan (2008) Effect of inlet section on pulse combustor performance. Jurnal Teknos-2K, 8 (1). pp. 9-14. ISSN 1411-4151

Abdul Wahid, Mazlan (2013) Pulse detonation engine research development at high speed reacting flow laboratory-hiref, Universiti Teknologi Malaysia. Applied Mechanics and Materials, 388 (n/a). pp. 285-291. ISSN 1662-7482

Abdul-Kadir, Mohammed Rafiq and Hansen, Ulrich N. (2007) Incorporation of interference fit and cyclic loading in simulation algorithm for better prediction of micromotion of femoral stems. Jurnal Teknologi, 47 (A). pp. 19-34. ISSN 0127-9696

Abdul-Kadir, Mohammed Rafiq and Kamsah, Nazri (2009) Interface micromotion of cementless hip stems in simulated hip arthroplasty. American Journal of Applied Sciences . pp. 1682-1689. ISSN 1546-9239

Abdul-Kadir, Mohammed Rafiq and Ulrich, Hansen and Ralf, Klabunde and Duncan, Lucas and Andrew, Amis (2008) Finite element modelling of primary hip stem stability: The effect of interference fit. Journal of Biomechanics, 41 (Issue 3). 587-594 . ISSN 0021-9290

Abdullah, Ahmad Baharuddin and Razali, Norhamimi and Mohd. Ripin, Zaidi (2004) Kajian kepuasan pelanggan terhadap produk pengguna untuk menyokong seni bina produk modular. Jurnal Mekanikal (17). pp. 1-14. ISSN 0127-3396

Abdullah, Mohamed Ruslan and Cantwell, Wesley J. (2012) The high-velocity impact response of thermoplastic-matrix fibre-metal laminates. Journal of Strain Analysis for Engineering Design, 47 (7). pp. 432-443. ISSN 0309-3247 (Print); 2041-3130 (Electronic)

Abdullah, Mohamed Ruslan and Prawoto, Yunan and Cantwell, Wesley James (2015) Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics. Materials and Design, 66 . pp. 446-452. ISSN 0261-3069

Abdullah M.A., (2012) A review of maximum power point tracking algorithms for wind energy systems. Renewable And Sustainable Energy Reviews, 16 (5). pp. 3220-3227. ISSN 1364-0321

Abdulrahman, A. S. and Ismail, M. and Hussain, Mohammad Sakhawat (2011) Inhibition of corrosion of mild steel in hydrochloric acid by bambusa arundinacea. International Review of Mechanical Engineering, 5 (1). pp. 59-63. ISSN 1970-8734

AbdulRahman S.A., (2012) Effect of load carriage on the backpack vibration system. Applied Mechanics And Materials, 165 . pp. 295-299.

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of effect holes twisted angle and compound angle of holes on film cooling effectiveness. International Review of Automatic Control, 8 (3). pp. 244-250. ISSN 1974-6059

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of film cooling effectiveness enhancement by using corrugated spiral holes. International Review of Mechanical Engineering, 9 (4). pp. 360-367. ISSN 1970-8734

Abed, Azher M. and Sopian, K. and Mohammed, Hussein A. and Alghoul, Mohamad Ahmed and Ruslan, Mohd. Hafidz and Mat, Sohif and Al-Shamani, Ali Najah (2015) Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids. Case Studies in Thermal Engineering, 5 . pp. 13-23. ISSN 2214-157X

Abed Mahdi, Raed and A. Mohammed, Hussein and Munisamy, K. M. (2013) Improvement of convection heat transfer by using porous media and nanofluid: review. International Journal of Science and Research, 2 (8). pp. 34-47. ISSN 2319-7064

Abioye, A. M. and Ani, Farid Nasir (2015) Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: a review. Renewable and Sustainable Energy Reviews, 52 . pp. 1282-1293. ISSN 1364-0321

Abu, Aminudin (1996) On the theoretical vibration analysis of the exhaust system. Jurnal Mekanikal, 1 (1). pp. 61-76. ISSN 0127-3396

Abu, Aminudin and Muhamad, Pauzia and Yahaya, Nazli and Sahekhaini, Asnizah and Abdullah, Hanida (2012) A prediction of acoustics characteristics for steam generator system. Journal the Institution of Engineers, Malaysia, 73 (1). pp. 41-49. ISSN 0538-0057

Abu, Risal and Md. Tap, Masine (2007) Attribute based feature recognition for machining features. Jurnal Teknologi , 46 (A). pp. 87-103. ISSN 2180-3722

Abu Bakar, A R. and Hamid, M K A and Zakaria, K (2005) Simulasi tekanan sentuhan dinamik bagi brek cakera menggunakan kaedah unsur terhingga.". Proceedings of Computational & Experimental Mechanics . pp. 287-296.

Abu Bakar, A R. and Li, L and James, S and Ouyang, H and Siegel, J E (2006) Wear simulation and its effect on contact pressure distribution and squeal of a disc brake. Proceedings of the International Conference on Vehicle Braking Technology . pp. 233-242. ISSN 0 85316 245X

Abu Bakar, A R. and OUYANG, H and Cao, Q (2003) Interface pressure distributions through structural modifications. SAE 2003 Transactions, Journal of Passenger Cars: Mechanical Systems , Vol. 1 (No. 6). pp. 2387-2392.

Abu Bakar, A. R. and Ouyang, H. and Titeica, D. and Hamid, M. K. A. (2005) Modelling and Simulation of Disc Brake Contact Analysis and Squeal. Seminar on Advances in Malaysian Noise Vibration and Comfort (NVC 2005) .

Abu Bakar, A. R. and Ouyang, Huajiang (2008) Wear prediction of friction material and brake squeal using the finite element method. Wear, 264 (11-12). pp. 1069-1076. ISSN 0043-1648

Abu Bakar, Abd Rahim and Abdul Hamid, Mohd Kameil and Dzakaria, Afandi and Abdul Ghani, Badri and Mohamad, Maziah (2006) Stability Analysis of Disc Brake Squeal Considering Temperature Effect. Jurnal Mekanikal, 22 . pp. 26-38. ISSN 0127-3396

Abu Bakar, Abd Rahim and Huajiang, Ouyang (2005) Prediction Of Disc Brake Contact Pressure Distributions By Finite Element Analysis. Jurnal Teknologi A (35A). pp. 113-124. ISSN 0127-9696

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2008) A prediction methodology of disk brake squeal using complex eigenvalue analysis. International Journal of Vehicle Design, 46 (4). pp. 416-435. ISSN 0143-3369

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2006) Complex eugenvalue analysis and dynamic transient analysis in predicting disc brake squeal. International Journal Vehicle Noise & Vibration, 2 (2). p. 143. ISSN 1479-1471

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2005) Prediction of disc brake contact pressure distributions by finite element analysis. Jurnal Teknologi A (43A). pp. 21-36. ISSN 0127-9696

Abu Bakar, Rosli and Lee, Chang Saik and Chon, Mun Soo (1996) An experimental study on the effect of air-assist and wall-flow distribution in the spark ignition engine performance. Jurnal Mekanikal, 2 (2). pp. 69-80. ISSN 0127-3396

Abu Bakar, Rosli and Wong, Chee Yeen (2000) Membina perisian untuk aliran yang melalui jasad. Jurnal Mekanikal, 1 (9). pp. 1-22. ISSN 0127-3396

Abu Bakar, Abd. Rahim and Ouyang, Huajiang and Chiing Khaia, Lee and Abdullah, Mohd. Shahrulizam (2010) Thermal analysis of a disc brake model considering a real brake pad surface and wear. International Journal of Vehicle Structures & Systems , 2 (1). pp. 20-27. ISSN 0975-3060

Abu Bakar, Abdul Rahim and Zainudin, Muhammad Amir (2012) Preventing disc brake squeal using a thin plate shim. International Journal of Vehicle Structures and Systems, 4 (1). pp. 23-27. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Abu Bakar, Saiful Anuar and Masuda , Ryosuke and Hashimoto , Hiromu and Inaba, Takeshi and Jamaluddin, Hishamuddin and Abdul Rahman, Roslan and Mohd. Samin, Pakharuddin (2012) Active suspension system in improving ride and handling performance of electric vehicle conversion. International Journal of Electric and Hybrid Vehicles, 4 (1). pp. 24-53. ISSN 1751-4088

Abu Bakar, Saiful Anuar and Muhammad Said, Mohd. Farid and Abdul Aziz, Azhar (2015) Ride comfort performance evaluations on electric vehicle conversion via simulations. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7794-7798. ISSN 1819-6608

Abu Bakar, Tuty Asma and Rahman, M. and Dowling, D. P. and Stokes, J. and Hashmi, M. S. J. (2010) Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel. Defect and Diffusion Forum, 297 . 365 - 369. ISSN 1662-9752

Abu Bakar, A. R. and Ouyang, H. and James, S and Li, L (2008) Finite element analysis of wear and its effect on squeal generation. Proc. IMechE Part D: J. Automobile Engineering, 222 (7). pp. 1153-1165. ISSN 0954-4070

Abu Hossain, Khandoker and Mohd-Jaajar, Mohammad Nazri and Ani, Farid Nasir (2004) Promoted Selection Non-Catalytic Reduction : Prospective Technology for Nitrogen Oxide Reduction. Asean Journal of Chemical Engineering, 4 (1).

Abu Husain, Nurulakmar and Ouyang, H. (2011) Detection of damage in welded structure using experimental modal data. Journal of Physics: Conference Series, 305 (1). 001-011. ISSN 1742-6588

Abu-Bakar, Abd Rahim and Buang, Mohd Reaza and Abdul Rashid, Mohd Zam and Abdul Rahman, Roslan (2009) Suppression of drum brake squeal through structural modifications using finite element method. International Journal of Vehicle Design , 51 (1-2). 3 -20. ISSN 0143-3369

Abuelnuor, Abuelnuor Abdeen Ali and Abdul Wahid, Mazlan and Saat, Aminuddin and Mohd. Sies, Mohsin and Elbasheer, M.K. and Hosseini, Seyed Ehsan and G., A. Dairobi and Mohammed, Hussein A. and Darus, Amer Nordin (2013) Review of numerical studies on nox emission in the flameless combustion. Applied Mechanics and Materials, 388 (n/a). pp. 235-240. ISSN 1662-7482

Abul Hossain, Khandoker and Mohd Jaafar, Mohammad Nazri and Mustafa, Azeman and Appalanidu, Kiran Babu and Ani, Farid Nasir (2004) Application of selective non-catalytic reduction of NOx in small-scale combustion systems. Atmospheric Environment, 38 (39). pp. 6823-6828. ISSN 1352-2310

Abyn, Hassan and Rafiqul Islam, Mohammad and Jaswar, Koto and Mahmoudi, Amin and Siow, C. L. and Kader, A. S. A. (2015) Wave exciting forces of a free floating semi submersible in regular waves. Jurnal Teknologi, 74 (5). pp. 53-57. ISSN 0127-9696

Adeyemi, Ademola James and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Interaction of body mass index and age in muscular activities among backpack carrying male schoolchildren. Work, 52 (3). pp. 677-686. ISSN 1051-9815

Adham, A. M. and Mohd Ghazali, Normah and Ahmad, Robiah (2012) Thermal performance of ammonia-cooled micro channel heat sink. International Review of Mechanical Engineering, 6 (4). pp. 828-836. ISSN 1970-8734

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Rabiah (2012) Optimization of an ammonia-cooled rectangular microchannel heat sink using multi-objective non-dominated sorting genetic algorithm (NSGA2). Heat and Mass Transfer, 58 (10). pp. 1723-1733. ISSN 0947-7411(Print); 1432-1181(Electronic)

Adi, Surjosatyo and Ani, Farid Nasir (2001) A numerical study of air flow in a coaxial pipe. Jurnal Teknologi A (34A). pp. 1-15. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Aerodynamic behavior of a compound wing configuration in ground effect. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 21-27. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Application of fuzzy logic controller to enhance the semi-SWATH performance in following seas. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 17-25. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Arm effect on performance of vertical axis current turbine using RANS simulation. Applied Mechanics and Materials, 554 . pp. 531-535. ISSN 1660-9336

Adi Maimun Abdul Malik, (2014) Assessment of ship-bank interactions on LNG tanker in shallow water. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 141-144. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) CFD application in resistance analysis for advanced semi-SWATH vehicle. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 44-49. ISSN 1660-9336

Adi Maimun Abdul Malik, (2014) Effect of mesh number on accuracy of semi submersible motion prediction. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 67-72. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Experimental aerodynamic characteristics of a compound wing in ground effect. Journal of Fluids Engineering-Transactions of the Asme, 136 (5). ISSN 0098-2202

Adi Maimun Abdul Malik, (2014) Experimental and numerical studies of vortex induced vibration on cylinder. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 169-175. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Experimental investigation of a wing-in-ground effect craft. Scientific World Journal . ISSN 1537-744X

Adi Maimun Abdul Malik, (2014) Fuzzy FMEA model for risk evaluation of ship collisions in the Malacca Strait: based on AIS data. Journal of Simulation, 8 (1). pp. 91-104. ISSN 1747-7778

Adi Maimun Abdul Malik, (2014) Ground viscous effect on 3D flow structure of a compound wing-in-ground effect. International Journal of Automotive and Mechanical Engineering, 9 (1). pp. 1550-1563. ISSN 2229-8649

Adi Maimun Abdul Malik, (2014) Hydrodynamic interaction of floating structure in regular waves. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 91-96. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) An innovative vertical axis current turbine design for low current speed. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 177-182. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Mooring pattern optimization using a genetic algorithm. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 189-193. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Numerical analysis of hydrodynamic propeller performance of LNG carrier in open water. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 85-89. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Numerical investigation for resistance characteristics of LNG carrier. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 101-107. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Numerical prediction of thermal effect on flow field around a high-rise building model. Applied Mechanics and Materials, 554 . pp. 680-685. ISSN 1660-9336

Adi Maimun Abdul Malik, (2014) Numerical simulation on wave interference of catamaran with fin stabilizer. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 163-167. ISSN 0127-9696

Adi Maimun Abdul Malik, (2014) Numerical studies of vortex induced vibration of a circular cylinder at high reynolds number. Proceedings of the Annual Offshore Technology Conference, 4 . pp. 3244-3250. ISSN 0160-3663

Adi Maimun Abdul Malik, (2014) Numerical study of the flow-induced vibration of two equal-diameter cylinders in tandem with varying the mass ratio. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 2 .

Adnan Hassan, (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174

Adnan Hassan, (2014) A hybrid genetic algorithm for solving job shop scheduling problems. Advanced Materials Research, 845 . pp. 559-563. ISSN 1022-6680

Adnan Hassan, (2014) A review of ergonomics and simulation modeling in healthcare delivery system. Advanced Materials Research, 845 . pp. 604-608. ISSN 1022-6680

Afifah, A. N. and Syahrullail, Samion and Nor Azwadi, Che Sidik (2015) Natural convection of aluminium oxide-water nanofluid. Jurnal Teknologi, 75 (11). pp. 161-167. ISSN 2180-3722

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Shaharoun, A. M. (2008) The evaluation methods of disassemblability for automotive components - a review and agenda for future research. Jurnal Mekanikal (26). pp. 49-62. ISSN 0127-3396

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Mohamed Shaharoun, Awaluddin (2010) EDAS: software for end-of-life disassembly analysis. International Journal of Sustainable Design, 1 (3). 257 . ISSN 1743-8284 (Print); 1743-8292 (Electronic)

Agoes Priyanto, (2014) Design online artificial gain updating sliding mode algorithm: applied to internal combustion engine. Applied Mechanics and Materials, 493 . pp. 321-326. ISSN 1660-9336

Agoes Priyanto, (2014) Ground viscous effect on aerodynamics of a compound wing with different reynolds number. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 379-383. ISSN 1660-9336

Agoes Priyanto, (2014) Numerical structural analysis on a composite main wing of wig craft. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 109-113. ISSN 0127-9696

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2003) Pengaruh nombor pusar ke atas pengurangan emisi NOx dari pembakar berbahan api cecair menggunakan pemusar udara aliran paksi. Jurnal Mekanikal (16). pp. 79-90. ISSN 0127-3396

Ahmad, Norhayati and Hussin, Munirah (2004) Kesan bahan mangkin ke atas proses pengawetan resin isopoliester dalam penghasilan komposit matrik polimer. Jurnal Mekanikal (17). 15 -35. ISSN 0127-3396

Ahmad, R. and Jamaluddin, H. and Hussain, M. A. (2004) Model structure selection for a discrete-time non-linear system using a genetic algorithm. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 218 . pp. 85-98. ISSN 0959-6518

Ahmad, Roazam and Mohd. Ja'afar, Mohammad Nazri (2000) Membangunkan pemusar udara untuk kegunaan ke atas pembakar berbahan api cecair. Jurnal Mekanikal, 1 (9). pp. 23-42. ISSN 0127-3396

Ahmad, Robiah and Jamaluddin, Hishamuddin (2002) Radial basis function (RBF) for non-linear dynamic system identification. Jurnal Teknologi A (36A). pp. 39-54. ISSN 0127-9696

Ahmad, Robiah and Jamaluddin, Hishamuddin and Hussain, Mohd. Azlan (2008) Application of memetic algorithm in modelling discrete-time multivariable dynamics systems. Mechanical Systems and Signal Processing, 22 (7). pp. 1595-1609. ISSN 0888-3270

Ahmad, S. N. A. S. and Hashim, J. and Ghazali, M. I. (2007) Effect of porosity on tensile properties of cast particle reinforced MMC. Journal of Composite Materials, 41 (5). pp. 575-589. ISSN 0021-9983

Ahmad, Fauzi and Hudha, Khisbullah and Imaduddin, Fitrian and Jamaluddin, Hishammudin (2010) Modelling, validation and adaptive pid control with pitch moment rejection of active suspension system for reducing unwanted vehicle motion in longitudinal direction. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 312-345. ISSN 1745-6444

Ahmad, Fauzi and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2009) Gain scheduling PID control with pitch moment rejection for reducing vehicle dive and squat. International Journal of Vehicle Safety, 4 (1). pp. 45-83. ISSN 1479-3105

Ahmad, Fauzi and Mazlan, Saiful Amri and Zamzuri, Hairi and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2015) Study on the potential application of electronic wedge brake for vehicle brake system. International Journal of Modelling, Identification and Control, 23 (4). pp. 306-315. ISSN 1746-6172

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ishak, Mohamad Shaiful Ashrul (2013) Prestasi pembakaran menggunakan pemusar udara aliran paksi dengan nombor pusar yang berbeza. Perintis E-Journal, 3 (1). pp. 32-44. ISSN 2232-0725

Ahmad, Norhayati and H., Sueyoshi (2010) Properties of Si3N4-TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders. Ceramics International, 36 (2). 491 -496. ISSN 0272-8842

Ahmad, Norhayati and Sueyoshi, H. (2011) Microstructure and mechanical properties of silicon nitride-titanium nitride composites prepared by spark plasma sintering. Materials Research Bulletin, 46 (3). pp. 460-463. ISSN 0025-5408

Ahmad, S. and Muhamad, N. and Muchtar, A. and Sahari, J. and Jamaludin, Khairur Rijal and Ibrahim, M. H. I. and Mohamad Nor, N. H. (2010) Optimisation of sintering factors of titanium foams using Taguchi method. International Journal of Integrated Engineering (Issue on Mechanical, Materials and Manufacturing Engineering), 2 (1). pp. 1-6. ISSN 2229-838X

Ahmad, S. N. and Hashim, J. and Ghazali, Masitah I. (2005) The effects of porosity on mechanical properties of cast discontinuous reinforced metal-matrix composite. Journal of Composite Materials, 39 (5). pp. 451-466. ISSN 0021-9983

Ahmad, Z. and Thambiratnam, D. P. (2009) Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures. International Journal of Crashworthiness, 14 (4). pp. 349-363. ISSN 1358-8265

Ahmad, Zaini and Abdullah, Mohamed Ruslan Uslan and Tamin, Mohd. Nasir (2015) Experimental and numerical studies of fiber metal laminate (FML) thin-walled tubes under impact loading. Advanced Structured Materials, 70 . pp. 433-443. ISSN 1869-8433

Ahmad, Zaini and J., Campbell (2013) Development of two dimensional solver code for hybrid model of energy absorbing system. International Journal of Physical Sciences, 8 (13). pp. 510-525. ISSN 1992-1950

Ahmad, Zair Asrar (2013) Semi-analytical finite element method for modeling of lamb wave propagation. CEAS Aeronautical Journal, 4 (n/a). pp. 21-33. ISSN 1869-5590

Ahmad D., (2012) Element free galerkin formulation of composite beams with longitudinal and transverse partial interactions. Applied Mechanics And Materials, 166-16 . pp. 3237-3240.

Ahmad Kamely, Mohamad and Mohd Yusof, Noordin and Ourdjini, Ali and Vellore Chelvaraj, Venkatesh (2008) The effectiveness of coatings when turning hardened cold work tool steel AISI D2 (60 HRC). International Journal of Machining and Machinability of Materials 2008, 4 (1). pp. 63-75. ISSN 1748-5711

Ahmad Safuan A.R., (2012) Estimation of wall friction of chamber box using consolidation characteristic. Applied Mechanics And Materials, 174-17 . pp. 2137-2141.

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) Reducing indoor air contaminants inside a bus passenger compartment. International Journal of Mechanical and Mechatronics Engineering, 15 (3). pp. 81-87. ISSN 2227-2771

Ahmad Zaini, Muhammad Abbas and Okayama, Reiko and Machida, Motoi (2009) Adsorption of aqueous metal ions on cattle-manure-compost based activated carbons. Journal of Hazardous Materials, 170 (2-3). pp. 1119-1124. ISSN 03043894

Ahmad, Mohd Zamani and Abdul Kader, Abdul Saman and Ahmat, Ahmat Narawi and Idris, Jamaliah (2006) A fuzzy application on a development planning model for a container terminal. Jurnal Teknologi A (45A). pp. 13-29. ISSN 0127-9696

Ahmed, H. E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) An overview on heat transfer augmentation using vortex generators and nanofluids: approaches and applications. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5951-5993. ISSN 1364-0321

Ainullotfi Abdul Latif, (2014) Inclusion of strain-rate effects in low velocity impact simulation of laminated composites. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 1395-1399. ISSN 1660-9336

Akhavan Farid, A. and Sharif, Safian and Idris, Mohd. Hasbullah (2011) Chip morphology study in high speed drilling of Al-Si alloy. International Journal of Advanced Manufacturing Technology, 57 (005-00). pp. 1-10. ISSN 0268-3768

Al-khafaji, Ali A. M. and Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Evolutionary algorithm for identification of a flexible single-link manipulator system. WSEAS Transactions on Systems and Control, 10 . pp. 58-75. ISSN 1991-8763

Al-Mola, Mohammed and Abdullah, Mohd. Yunus and Mailah, Musa and Muhaimin, Abdul Halim and Mohd Samin, Pakharuddin (2013) Fuzzybased PID with iterative learning active force controller for an antilock brake system. International Journal of Simulation, Systems, Science and Technology, IJSSST, 13 (3A). pp. 35-41. ISSN 1473-8031

Al-Obaidi S.M.A., (2012) A review of acoustic emission technique for machinery condition monitoring: defects detection & diagnostic. Applied Mechanics and Materials, 229-23 . pp. 1476-1480. ISSN 1660-9336

Al-Shamani, Ali Najah and Sopian, K. and Mohammed, Hussein A. and Mat, Sohif and Ruslan, Mohd. Hafidz and Abed, Azher M. (2015) Enhancement heat transfer characteristics in the channel with Trapezoidal rib-groove using nanofluids. Case Studies in Thermal Engineering, 5 . pp. 48-58. ISSN 2214-157X

Al-Shayeb, Mohamed and Lie, T. T. and Abd. Ghani, Badri (1997) Sensitivity analysis of columns at extreme temperature. Jurnal Mekanikal, 1 (3). pp. 1-16. ISSN 0127-3396

Al-Turaihi, Riyadh S. and Hussein, Ahmed Kadhim and Al-Kayiem, Hussain H. and A. Mohammed, Hussein (2013) Experimental investigation of various solid particle materials on the steady state gassolid fluidized bed system. Journal of Basic and Applied Scientific Research, 3 (7). pp. 293-304. ISSN 2090-4304

Alawi, Omer A. and Che Sidik, Nor Azwadi and Mohammed, H. A. (2014) A comprehensive review of fundamentals, preparation and applications of nanorefrigerants. International Communications in Heat and Mass Transfer, 54 . pp. 81-95. ISSN 0735-1933

Alawi, Omer A. and Che Sidik, Nor Azwadi and Wah, Yen Tey (2015) A numerical study of heat transfer to turbulent separation nanofluid flow in an annular passage. Jurnal Teknologi, 77 (8). pp. 75-82. ISSN 2180–3722

Alexandrov, Sergei Evgenievich and Mustafa, Yusof (2015) Quasi-static axially symmetric viscoplastic flows near very rough walls. Applied Mathematical Modelling, 39 (15). pp. 4599-4606. ISSN 0307904X

Ali, M. and Hamzah, E. and Abbas, T. and Mohd Toff, M.R.H. and Qazi, I.A. (2008) Macrodroplet reduction and growth mechanisms in cathodic arc physical vapor deposition of TiN films. Surface Review and Letters , 15 (5). pp. 653-659. ISSN 0218625X

Ali, Arifah and Maimun, Adi and Ahmed, Yasser M. and Rahimuddin, Rahimuddin and A. Ghani, Mohamad Pauzi (2015) Experimental analysis on flow around fin assisted semi SWATH. Jurnal Teknologi, 74 (5). pp. 91-95. ISSN 2180-3722

Ali, Mubarak and Hamzah, Esah and Mohd. Toff, Mohd. Radzi (2006) Effect of substrate bias on friction coefficient, adhesion strength and hardness of tin-coated tool steel. Surface Review and Letters, 13 (6). pp. 763-771. ISSN 0218-625X

Ali M.A.H., (2012) Path planning of mobile robot for autonomous navigation of road roundabout intersection. International Journal of Mechanics, 6 (4). pp. 203-211. ISSN 1998-4448

Ali Ourdjini, (2014) Effect of elements cerium and lanthanum on eutectic solidification of Al-Si-Cu near eutectic cast alloy. Advanced Materials Research, 845 . pp. 118-122. ISSN 1022-6680

Ali Ourdjini, (2014) Effect of mish metal cerium addition on fluidity of aluminum eutectic silica alloys -LM6. Applied Mechanics and Materials, 465-46 . pp. 839-842. ISSN 1660-9336

Ali Ourdjini, (2014) Effect of solder volume on interfacial reaction between SAC405 solders and EN(B)EPIG surface finish. Advanced Materials Research, 845 . pp. 76-80. ISSN 1022-6680

Ali Ourdjini, (2014) Evaluation of the effect of bismuth on Mg2Si particulate reinforced in Al-20%Mg2Si in-situ composite. Advanced Materials Research, 845 . pp. 22-26. ISSN 1022-6680

Ali Ourdjini, (2014) A new approach to assess the effects of Sr and Bi interaction in ADC12 Al-Si die casting alloy. Thermochimica ACTA, 575 . pp. 179-187. ISSN 0040-6031

Ali, Mubarak and Hamzah, Esah and Toff, Mohammad Radzi (2008) Friction coefficient and surface roughness of TiN-coated HSS deposited using cathodic arc evaporation PVD technique. Industrial Lubrication and Tribology, 60 . pp. 121-130. ISSN 0036-8792

Alias, Amran and Mat Rejab, Mohd. Ruzaimi and Mohamad, Mohd. Radzai and Md. Akil, Hazizan and Ahmad Nor, Nor Azlan (2005) Behaviour of circular sandwich panel under dynamic loading. Jurnal Mekanikal (20). pp. 96-111. ISSN 0127-3396

Alias, Amran and Ahmad Nor, Nor Azlan and Said, Mohd Radzai (2007) The behaviour of square sandwich panel Part I: under static loading. Jurnal Teknologi, 47 (A). pp. 1-18. ISSN 0127-9696

Alias, Amran and Mat Rejab, Mohd. Ruzaimi and Mohamad, Mohd Radzai and Md. Akil, Hazizan and Ahmad Nor, Nor Azlan (2005) Behaviour of circular sandwich panel under static loading. Jurnal Mekanikal (20). pp. 78-95. ISSN 0127-3396

Alias, Norma and Mohamed, Mohd. Salleh Sahimi and Abdullah, Abdul Rahman (2002) Parallel algorithms on some numerical techniques using PVM platform on a cluster of workstations. Proceedings of the 7th Asian Technology Conference in Mathematics . pp. 1-10. ISSN Electronic

Alkali, Adam Umar and Mohd. Yusof, Noordin and Sa’ad Elmunafi, Mohamed Handawi and Fawad, Hasan (2013) Influence of cutting conditions on chip formation when turning ASSAB DF3 hardened tool steel. International Journal of Materials, Mechanics and Manufacturing, 1 (1). pp. 76-79. ISSN 1793-8198

Almasi, Davood and Sudin, Izman and Sadeghi, Morteza and Iqbal, Nida and Roozbahani, Fatemeh and Krishnamurithy, Genasan and Kamarul, T. and Abdul Kadir, Mohammed Rafiq (2015) In vitro evaluation of bioactivity of chemically deposited hydroxyapatite on polyether ether ketone. International Journal of Biomaterials, 2015 . ISSN 1687-8787

Amin, (2012) Ball milling of WC-CO powder as injection molding feedstock. Applied Mechanics And Materials, 110-11 . pp. 1425-1430. ISSN 1660-9336

Amin Noshadi, (2012) Performance analysis of the computed torque based active force control for a planar parallel manipulator. Applied Mechanics And Materials, 110-11 . pp. 4932-4940. ISSN 1660-9336

Aminuddin Saat, (2014) Laminar mass burning and entrainment velocities and flame instabilities of i-octane, ethanol and hydrous ethanol/air aerosols. Combustion and Flame, 161 (6). pp. 1620-1632. ISSN 0010-2180

Amran Ayob, (2014) Experimental investigation on free vibration of foam-core sandwich plate with and without circular polymer columns. Advanced Materials Research, 845 . pp. 297-301. ISSN 1022-6680

Amran Ayob, (2014) Mechanical properties of potentially-smart carbon/epoxy composites with asymmetrically embedded shape memory wires. Materials & Design, 59 . pp. 486-493. ISSN 1873-4197

Amrin, Astuty and Abu Bakar, Yusri (1996) A study of hydrogen embrittlement (HE) on tempered carbon steel. Jurnal Mekanikal, 1 (1). pp. 99-106. ISSN 0127-3396

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanai and Ghanaati, Ali (2015) Influence of hot burned gas utilization on the exhaust emission characteristics of a controlled auto-ignition two-stroke cycle engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2396-2404. ISSN 2229-8649

Andwari A.M., (2012) Homogenous charge compression ignition (HCCI) technique: a review for application in two-stroke gasoline engines. Applied Mechanics And Materials, 165 . pp. 53-57.

Ani, Farid Nasir and Darus, Amer Nordin and Hussain, Ahmad and Mokhtar, Hamdan and Azam, Saiful (2006) Thermogravimetric and kinetic studies on palm shells. Journal of Industrial Technology, 15 (1). pp. 87-99. ISSN 0128-4940

Ani, Farid Nasir and Hussain, Ahmad and Darus, Amer Nordin (2006) Gas-solid flow modelling in the riser of a circulating fluidised bed. International Journal of Modelling and Simulation . ISSN 0228-6203

Ani, Farid Nasir and Hussain, Ahmad and Darus, Amer Nordin and Jack, Ray Morhhy (2006) Hydrodynamic and fluidization behaviour in a circulating fluidized bed. International Journal of Mechanical & Materials Engineering (IJMME), 1 (1). pp. 17-22. ISSN 1544-4740

Ani, Farid Nasir and Abdullah, M Adlan and Hassan, Masjuki (2014) Performance and emission of a common rail passenger car engine fuelled with palm oil biodiesel. Applied Mechanics and Materials, 564 . pp. 66-71. ISSN 1660-9336

Ani, Farid Nasir and Lim, Xin Yi (2012) The spray combustion of palm olein and diesel fuel blends. Jurnal Mekanikal (34). pp. 47-56. ISSN 0127-3396

Ani, Farid Nasir and Mat Junoh, Muhammad and Ab. Muis, Zarina (2015) Granular-activated carbon from Mukah coal using carbon dioxide activation. Jurnal Teknologi, 75 (11). pp. 123-127. ISSN 2180-3722

Ani, Farid Nasir and Mohamad Nor, Noruzaima (2010) Energy index for palm oil processing in oil palm mills. International Journal of Quality and Innovation, 1 (2). pp. 112-123. ISSN 1756-6975 (Print); 1756-6983 (Electronic)

Ani, Farid Nasir and Salema, Arshad Adam (2012) Pyrolysis of oil palm empty fruit bunch biomass pellets using multimode microwave irradiation. Bioresource Technology, 125 . pp. 102-107. ISSN 0960-8524

Ani, Farid Nasir and Wan Ali, Wan Khairuddin and Yusof, Ahmad Anas (2005) Effect of oil palm shell carbon–polyester resin composite on microwave absorber properties. Jurnal Mekanikal (19). pp. 1-10. ISSN 0127-3396

Anis Sagaff, (2012) Experimental tests on composite beam with various slab systems. Applied Mechanics and Materials, 166-16 . pp. 33-36. ISSN 1660-9336

Anwar Johari, (2012) Economic and environmental benefits of landfill gas from municipal solid waste in Malaysia. Renewable And Sustainable Energy Reviews, 16 (5). pp. 2907-2912. ISSN 1364-0321

Anwar Johari, (2013) Feed-in-tariff (FIT) concept to promote the usage of renewable energy in Malaysia. International Journal of Energy and Power (IJEP), 2 (2). pp. 33-37. ISSN 2169-4915

Aparow, Vimal Rau and Hudha, Khisbullah and Ahmad, Fauzi and Jamaluddin, Hishamuddin (2015) Modeling and validation of electronic wedge brake mechanism for vehicle safety system. Jurnal Teknologi, 75 (1). pp. 183-191. ISSN 2180-3722

Aqeel Ahmad Bazmi, (2011) Sustainable energy systems: role of optimization modeling techniques in power generation and supply-a review. Renewable and Sustainable Energy Reviews, 15 . pp. 3480-3500. ISSN 1364-0321

Aqida, S. N. and Ghazali, M. I. and Hashim, J. (2004) Effects Of Porosity On Mechanical Properties Of Metal Matrix Composite: An Overview. Jurnal Teknologi A (40A). pp. 17-32. ISSN 0127-9696

Aqida, S. N. and Ghazali, M. I. and Hashim, J. (2003) The effects of stirring speed and reinforcement particles on porosity formation in cast MMC. Jurnal Mekanikal (16). pp. 22-30. ISSN 0127-3396

Ariyono, Sugeng and Tawi, Kamarul Baharin and Jamaluddin, Hishamuddin and Supriyo, Bambang (2006) Engine Speed Control using Online ANN for Vehicle with EMDAP-CVT. Jurnal Mekanikal, 22 . pp. 39-52. ISSN 0127-3396

Arsad, S.S and Noh, S. N. S. S. and Ayob, Amran and Ahmad, Zaini and Abdul Latif, Ainullotfi and Kamsah, Nazri and Tamin, Mohd. Nasir (2012) Deformation response of steel sheet metal under transverse impact loading. International Review of Mechanical Engineering, 6 (3). pp. 680-684. ISSN 1970-8734

Arshad Adam, Salema and Ani, Farid Nasir (2010) Microwave pyrolysis of oil palm fibres. Jurnal Mekanikal : An International Journal (30). pp. 77-86. ISSN 0127-3396

As'arry, A. and Mailah, Musa and Hussein, Mohamed and Yusop, Zulkifli and Md. Zain, M. Z. (2011) Active tremor control in 4-DOFs biodynamic hand model. International Journal of Mathematical Models and Methods in Applied Sciences, 5 (6). pp. 1068-1076. ISSN 1998-0140

Ashokkumar, Veeramuthu and Salam, Zainal and Sathishkumar, Palanivel and Hadibarata, Tony and Mohd. Yusoff, Abdull Rahim and Ani, Farid Nasir (2015) Exploration of fast growing botryococcus sudeticus for upstream and downstream process in sustainable biofuels production. Journal of Cleaner Production, 92 . pp. 162-167. ISSN 0959-6526

Ashrafi S.A., (2012) Assessment of hole quality and thrust force when drilling CFRP/AL stack using carbide tools. Applied Mechanics and Materials, 234 . pp. 28-33. ISSN 1660-9336

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri (2004) The effect of swirl number on discharge coefficient for various orifice sizes in a burner system. Jurnal Mekanikal (17). pp. 99-108. ISSN 0127-3396

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri (2005) The effect of swirl number on reducing emissions from liquid fuel burner system. Jurnal Mekanikal (19). pp. 48-56. ISSN 0127-3396

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri and Wan Omar, Wan Zaidi (2014) Experimental analysis on the formation of CO-NO-HC in swirling flow combustion chamber. Jurnal Teknologi, 72 (4). pp. 21-26. ISSN 2180-3722

Asri Ibrahim, Kamarul and Mak, Weng Yee (2009) Fault detection and diagnosis using correlation coefficients between variables. Jurnal Teknologi Siri, 50 (F). pp. 1-13. ISSN 2180-3722

Assadsangabi B., (2012) Ferrofluid-based variable inductor. Proceedings Of The IEEE International Conference On Micro Electro Mechanical Systems (Mems) . pp. 1121-1124. ISSN 1084-6999

As’arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus and Kazi, Suhail (2010) Development of experimental rig for human hand tremor in postural condition. International Journal of Human Factors Modelling and Simulation, Inderscience .

Atabaki, Mazar and Idris, Jamaliah (2011) Low-temperature partial transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite to AZ91D using Al-based interlayer. Materials & Design, 34 . 832–841. ISSN 0261-3069

Awang, Ibrahim Marzukie and Abu Bakar, Abd. Rahim and Ghani, Badri Abd. and Rahman, Rahman Abd. and Md. Zain, Mohd. Zarhamdy (2009) Complex eigenvalue analysis of windscreen wiper chatter noise and its suppression by structural modifications. International Journal of Vehicle Structures and Systems, 1 (1-3). pp. 24-29. ISSN 0975-3060 (print) ; 0975-3540 (Online)

Ayob, Amran (2006) Stress analysis of torispherical shell with radial nozzle. The Journal of the Institution of Engineers, Malaysia , 67 (3). pp. 59-64. ISSN 0126-513X

Ayob, Amran and Elbasheer, M. Kabashi (2007) Optimum autofrettage pressure in thick cylinders. Jurnal Mekanikal (24). pp. 1-14. ISSN 0127-3396

Ayob, Md. Razali (1996) Laser light diffraction technique for particle sizing. Jurnal Mekanikal, 1 (1). pp. 1-19. ISSN 0127-3396

Ayob, Amran (2003) Stress analysis of piping elbows using FEM. The Journal of the Institution of Engineers, Malaysia (IEM), 64 (3). pp. 13-19. ISSN 012-513X

Ayob, Amran and Alias, Amran and H., Mozafari (2011) 2D modeling of a thin interphase layer between two glass fibers-reinforced. European Journal of Scientific Research, 50 (3). pp. 340-344. ISSN 1450216X

Ayob, Amran (2004) The effect of D/T on the load interaction behavior of a plain pipe. Journal of Pressure Vessel Technology , 126 . pp. 518-523.

Azanizawati Ma'aram, (2014) A hybrid fuzzy MCDM approach for sustainable third-party reverse logistics provider selection. Advanced Materials Research, 845 . pp. 521-526. ISSN 1022-6680

Azhar Abdul Aziz, (2014) Empirical correlations for sizing adiabatic capillary tube using LPG as refrigerant in split-type air-conditioner. Advances in Applied Mechanics and Materials, 493 . pp. 99-104. ISSN 1660-9336

Azhar Abdul Aziz, (2014) Energy savings on automotive air conditioner using liquid-suction heat exchanger subcooler. Applied Mechanics and Materials, 554 . pp. 256-260. ISSN 1660-9336

Azhar Abdul Aziz, (2014) Experimental investigation of the influence of internal and external EGR on the combustion characteristics of a controlled auto-ignition two-stroke cycle engine. Applied Energy, 134 . pp. 1-10. ISSN 0306-2619

Azhar Abdul Aziz, (2014) An experimental study on the influence of EGR rate and fuel octane number on the combustion characteristics of a CAI two-stroke cycle engine. Applied Thermal Engineering, 71 (1). pp. 248-258. ISSN 1359-4311

Azhar Abdul Aziz, (2014) Performance analysis of hydrocarbon mixture to replace R134a in an automotive air conditioning system. Applied Mechanics and Materials, 554 . pp. 444-448. ISSN 1660-9336

Azhar Abdul Aziz, (2014) A review of supercritical fluid extraction technology and application. Jurnal Teknologi (Sciences and Engineering), 69 (6). pp. 27-31. ISSN 0127-9696

Aziz, (2012) Effect of oxidizer-fuel mixture ratio to the pressure exponent of ammonium perchlorate based composite propellant. Applied Mechanics And Materials, 110-11 . pp. 1380-1386. ISSN 1660-9336

Aziz, (2012) A study of basic aluminized propellants characteristics. Applied Mechanics And Materials, 110-11 . pp. 1321-1327. ISSN 1660-9336

Aziz, Amir and Mamat, Rizalman and Wan Ali, Wan Khairuddin and Mohd. Perang, Mohd. Rozi (2015) Review on typical ingredients for ammonium perchlorate based solid propellant. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6188-6191. ISSN 1819-6608

Azman, Muhammad Firdaus and Mohamad Halimin, Nur Asyikin and Mohd. Zain, Azlan (2011) Estimating minimum processing time of liquid crystal display monitor hinge in 2D contouring machining. Communications in Computer and Information Science, 252 (2). pp. 239-249. ISSN 1865-0929

Azmi, Azwan Iskandar and Mohd. Taib, Jamaludin and Muhammad, Zulkepli (2003) Feature extraction from step AP224 file sets. Jurnal Mekanikal (16). pp. 31-46. ISSN 0127-3396

Bahadori A., (2012) Estimation of the effect of biomass moisture content on the direct combustion of sugarcane bagasse in boilers. International Journal of Sustainable Energy . ISSN 1478-6451

Baharin, Nor Hatini and Abdul Rahman, Roslan (2009) Effect of accelerometer mass on thin plate vibration. Jurnal Mekanikal (29). pp. 100-111. ISSN 0127-3396

Bahri, B. and Abdul Aziz, Azhar and Shahbakhti, M. and Muhamad Said, Mohd. Farid (2013) Ethanol fuelled HCCI engine: a review. World Academy of Science, Engineering and Technology (WASET), 7 (7). pp. 670-675. ISSN 2010-376X

Bahri B., (2012) Misfire detection based on statistical analysis for an ethanol fueled HCCI engine. International Review of Mechanical Engineering, 6 (6). pp. 1276-1282. ISSN 1970-8734

Bakar, A. A. and Hassan, A. and Yusof, A. F. M. (2009) Effect of processing temperatures on mechanical properties of oil palm empty fruit bunch-filled PVC extrudates. Journal of Reinforced Plastics and Composites, 28 (20). pp. 2433-2443. ISSN 0731-6844

Bala, M. and Yussuf, A. A. and Mohammad, I. (2009) Making void-free cement-latex blend using morphology and thermal degradation analysis. Indian Concrete Journal, 83 (11). 32 -39. ISSN 0019-4565

Balaji, R. and Yaakob, Omar (2012) An analysis of shipboard waste heat availability for ballast water treatment. Journal of Marine Engineering And Technology, 11 (2). pp. 15-29. ISSN 1476-1548

Balajt, R. and Yaakob, Omar (2011) Emerging ballast water treatment technologies: A review. Journal of Sustainability Science and Management, 6 (1). pp. 126-138. ISSN 1823-8556

Bambang Supriyo, (2014) Experimental study of electro-mechanical dual acting pulley continuously variable transmission ratio calibration. Jurnal Teknologi, 71 (2). pp. 121-127. ISSN 0127-9696

Banitalebi, Akbar and Abd. Aziz, Mohd. Ismail and Ahmad, Rohanin (2012) A hybrid optimization method for constrained optimal control problem. IOSR Journal of Mathematics, 1 (2). pp. 38-41. ISSN 2278-5728

Barzani M.M., (2012) Effect of machining parameters on cutting force when turning untreated and sb-treated al-11%si-1.8%Cu alloys using PVD coated tools. Applied Mechanics and Materials, 234 . pp. 74-77. ISSN 1660-9336

Basaran, C. and S., Li and Abdul Hamid, M. F. (2008) Thermomigration induced degradation in solder alloys. American Institute of Physics, 103 (12). pp. 1-9. ISSN 1070-664X

Behrouzi, F. and Kuan Yew, Wong (2011) Lean performance evaluation of manufacturing systems: A dynamic and innovative approach. Procedia Computer Science, 3 . pp. 388-395. ISSN 1877-0509

Belhocine, Ali and Abu Bakar, Abd. Rahim and Abdullah, Oday Ibraheem (2014) Structural and contact analysis of disc brake assembly during single stop braking event. Transactions of the Indian Institute of Metals, 68 (3). pp. 403-410. ISSN 0972-2815

Belova, I. V. and Murch, G. E. and Muthubandara, N. and Ochsner, A. (2007) Analysis of oxygen segregation at meatl-oxide interfaces a new lattice monte carlo method. Solid State Phenomena, 129 . pp. 111-117.

Belova, Irina V. and Murch, Graeme E. and Fiedler, Thomas and Öchsner, Andreas (2008) The lattice Monte Carlo method for solving phenomenological mass and thermal diffusion problems. Defect and Diffusion Forum , 279 . pp. 13-22. ISSN 1012-0386

Belova, Irini V. and Murch, Graeme E. and Fiedler, Thomas and Ochsner, Andreas (2007) The lattice Monte Carlo method for solving phenomenological mass and heat transport problem. Diffusion Fundamentals, 4 . pp. 1-23. ISSN 1862-4138

Bengsoon M.E., (2012) Structural modification of disc brake judder using finite element analysis. Applied Mechanics And Materials, 165 . pp. 68-72.

Bhutto, (2012) Greener energy: issues and challenges for Pakistan-hydel power prospective. Renewable And Sustainable Energy Reviews, 16 (5). pp. 2732-2746. ISSN 1364-0321

Borhana, A. A. and Mohamad, A. T. and Abdul Latif, A. and Ahmad, Zaini and Ayob, A. and Tamin, Mohd. Nasir (2012) Ductile failure prediction of spot welded lap joint. Applied Mechanics and Materials, 165 . pp. 285-289. ISSN 1660-9336

Burhaumudin, Mohammad Safwan and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd Rahman, Roslan and Sulaiman, Syabillah (2012) Integration of magic formula tire model with vehicle handling model. International Journal of Research in Engineering and Technology, 1 (3). pp. 139-145. ISSN 2277-4378

C. S., Nor Azwadi and Tanahashi, T. (2008) Development of 2-D and 3-D double-population thermal lattice boltzmann models. Matematika, 24 (1). pp. 53-66. ISSN 0127-8274

C. Y. Leow, (2011) Joint beamforming and power management for nonregenerative MIMO two-way relaying channels. IEEE Trans. Vehicular Technology, 60 (9). pp. 4374-4383. ISSN 0018-9545

Cha Sidik, Nor Azwadi and Osman, Kahar and Khudzairi, Ahmad Zahran and Ngali, Zamani (2008) Numerical investigation of lid-driven cavity flow based ontwo different methods: lattice boltzmann and splitting method. Jurnal Mekanikal (25). pp. 1-8. ISSN 0127-3396

Chaudhary, K. T. and Qindeel, Rabia and Saktioto, Saktioto and Hussain, Mohd. Sakhawat and Ali, Jalil and Yupapin, P. P. (2011) Graphite thin film deposition using laser induced plasma. Procedia Engineering, 8 . pp. 423-427. ISSN 1877-7058

Che Kob, Mohd. Salman and Supriyo, Bambang and Tawi, Kamarul Baharin and Mazali, Izhari Izmi (2015) Engagement slip controller development based on actuator displacement for an electro-mechanical friction clutch system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2664-2674. ISSN 2229-8649

Che Mat Isa, Mohamd Azman and Mohd. Rohani, Jafri (2001) Peningkatan Kualiti Produk (Billet) Melalui Teknik Asas Kawalan Kualiti. Jurnal Teknologi A (34A). pp. 29-43. ISSN 0127-9696

Che Sidek, Nor Azwadi and Abdul Munir, Fudhail (2012) Lattice Boltzmann numerical prediction of fluid flow in various shapes of shear driven cavity. International Review of Mechanical Engineering, 6 (3). pp. 565-573. ISSN 1970-8734

Che Sidek, Nor Azwadi and Idris, M. S. (2010) Mesoscale numerical approach to predict macroscale fluid flow problems. Journal of Applied Sciences, 10 (15). 1511 - 1524. ISSN 1812-5654

Che Sidek, Nor Azwadi and Irwan, M. A. M. (2010) Macro and mesoscale simulations of free convective heat transfer in a cavity at various aspect ratios. Journal of Applied Sciences, 10 (3). 203 -208. ISSN 1812-5654

Che Sidek, Nor Azwadi and M. A. M., Irwan (2010) Simplified mesoscale lattice boltzmann numerical model for prediction of natural convection in a square enclosure filled with homogeneous porous media. WSEAS Transactions on Fluid Mechanics, 5 (3). 186 - 195. ISSN 1790-5087

Che Sidek, Nor Azwadi and M. S., Idris (2010) Finite different and lattice boltzmann modelling for simulation of natural convection in a square cavity. International Journal of Mechanical and Materials Engineering, 5 (1). 80 - 86. ISSN 1823-0334

Che Sidek, Nor Azwadi and Mohd. Yasin, Mohd. Fairus and Samion, Syahrullail (2010) Virtual study of natural convection heat transfer in an inclined square cavity. Journal of Applied Sciences, 10 (4). 331 -336. ISSN 1812-5654

Che Sidek, Nor Azwadi and Mussa, M. A. and Abdullah, S. and Muhamad, N. (2011) Simulation of natural convection heat transfer in an enclosure by the lattice-Boltzmann method. Computers & Fluids, 44 (1). pp. 162-168. ISSN 1991-8178

Che Sidek, Nor Azwadi and Nik Izual, N. I. (2010) Lattice boltzmann numerical scheme for the simulation of natural convection in an inclined square cavity. WSEAS Transactions on Mathematics, 9 (6). 417 - 426. ISSN 1109-2769

Che Sidik, Nor Azwadi and Rosdzimin, A. R. M. (2008) Simulation of natural convention heat transfer in an enclosure using lattice boltzmann method. Jurnal Mekanikal (27). pp. 42-50. ISSN 0127-3396

Che Sidik, Nor Azwadi (2009) Lattice boltzmann simulation of natural convection and fluid flow around a heated cylinder in an enclosed square. Journal of Materials Sciences and Engineering, 3 (8). pp. 44-48. ISSN 1934-8959

Che Sidik, Nor Azwadi (2009) Prediction of natural convection in a square cavity with partially heated from below and symmetrical cooling from sides by the finite difference lattice Boltzmann method. European Journal of Scientific Research, 35 (3). pp. 347-354. ISSN 1450-202X

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2012) Mesoscale numerical prediction of fluid flow in a shear driven cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 1319-8025

Che Sidik, Nor Azwadi and Abdul Wahid, Mazlan and K. M., Saqr (2010) Theoretical notes on the mathematical modelling of gaseous detonations using boltzmann equation. Journal of Applied Sciences, 10 (14). 1476 -1480. ISSN 1812-5654

Che Sidik, Nor Azwadi and Attarzadeh, S. M. R. (2011) An accurate numerical prediction of solid particle fluid flow in a lid-driven cavity. International Journal of Mechanics, 5 (3). pp. 123-128. ISSN 1998-4448

Che Sidik, Nor Azwadi and Izual, N. I. N. (2012) Numerical investigation of fluid and thermal flow in a differentially heated side enclosure walls at various inclination angles. CMES - Computer Modeling in Engineering and Sciences, 84 (6). pp. 559-574. ISSN 1526-1492 (Print); 1526-1506 (Electronic)

Che Sidik, Nor Azwadi and M. M., Yassin and Musa, Mutah N. (2015) Turbulent-forced convective heat transfer and pressure drop analysis of FE3O4 magnetic nanofluid in a circular microchannel. Jurnal Teknologi, 75 (11). pp. 11-15. ISSN 0127-9696

Che Sidik, Nor Azwadi and Masoud, Godarzi (2012) Solution to natural convection heat transfer by two different approaches: navier stokes and lattice Boltzmann. International Review of Mechanical Engineering, 6 (4). pp. 705-711. ISSN 1970-8734

Che Sidik, Nor Azwadi and Mat Sahat, Idris (2012) Finite difference and cubic interpolated profile lattice boltzmann method for prediction of two-dimensional lid-driven shallow cavity flow. Arabian Journal for Science and Engineering, 37 (4). pp. 1101-1110. ISSN 1319-8025 (Print); 2191-4281 (Electronics)

Che Sidik, Nor Azwadi and Mohd. Yazid, Muhammad Noor Afiq Witri and Mamat, Rizalman (2015) A review on the application of nanofluids in vehicle engine cooling system. International Communications in Heat and Mass Transfer, 68 . pp. 85-90. ISSN 0735-1933

Che Sidik, Nor Azwadi and Mohd. Zin, Mohd. Rody (2010) Modeling of dynamics of droplet using the lattice boltzmann method. International Journal of Mechanical and Materials Engineering, 5 (2). 276 - 281. ISSN 1823-0334

Che Sidik, Nor Azwadi and Ng, Chee Horng (2009) Lattice boltzmann modelling of microchannel flow. Journal of Materials Science and Engineering, 3 (12).

Che Sidik, Nor Azwadi and Nik Ibrahim, Nik Izual (2010) Numerical simulation of natural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Che Sidik, Nor Azwadi and Nor Hamizan, M. S. and Ammar, N. M. (2010) Assessment of lattice boltzmann simulation scheme in predicting two-phase (Solid-Fluid) flow. Jurnal Mekanikal (31). pp. 11-16. ISSN 0127-3396

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Eulerian-lagrangian numerical scheme for contaminant removal from cavity in horizontal channel. Advanced Science Engineering and Medicine, 4 (5). pp. 432-437. ISSN 2164-6627 (Print) ; 2164-6635 (Electronic)

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical prediction of mixed convection heat transfer in an enclosure. International Review on Modelling and Simulations, 5 (3). pp. 1339-1343. ISSN 1974-9821

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical simulation of flow over semicircular cavity. International Review on Modelling and Simulations, 5 (3). pp. 1335-1338. ISSN 1974-9821

Che Sidik, Nor Azwadi and Samion, Syahrullail (2009) Lattice Boltzman numerical prediction of behavior downstream of cylinder blockage at various Reynolds numbers. World Academy of Science, Engineering and Technology, 26 . pp. 7-11. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Che Sidik, Nor Azwadi and Syahrullail, S. (2009) A 3D lattice bgk scheme for simulation of thermal flow in cubic cavity. European Journal of Scientific Research, 37 (1). pp. 49-57. ISSN 1450-216X

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2008) Simplified finite difference thermal lattice Boltzmann method. International Journal of Modern Physics B, 22 (22). pp. 3865-3876. ISSN 0217-9792

Chelliapan, S. and Yuzir, A. and Md. Din, M. F. and Sallis, P. J. (2011) Anaerobic pre-treatment of pharmaceutical wastewater using packed bed reactor. International Journal of Chemical Engineering and Applications, 2 (1). pp. 32-37. ISSN 2010-0221

Chelliapan , Shreeshivadasan and Sallis, P. J. (2011) Application of anaerobic biotechnology for pharmaceutical wastewater treatment. IIOAB Journal, 2 (1). pp. 13-21. ISSN 0976-3104

Cheng, Eng Cong and Velautham, Sanjayan and Darus, Amer Nordin (2005) Solar thermal organic Rankine cycle as a renewable energy option. Jurnal Mekanikal (20). pp. 68-77. ISSN 0127-3396

Chiong Ing T., (2012) Tribological behaviour of refined bleached and deodorized palm olein in different loads using a four-ball tribotester. Scientia Iranica, 19 (6). pp. 1487-1492. ISSN 1026-3098

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Shaharoun, Awaluddin Mohamed and Ismail, Syuhaida (2015) A review on sustainability transformation roadmaps using project management methodology. Advanced Science Letters, 21 (2). pp. 133-136. ISSN 1936-6612

Chong, (2012) Construction contract clarity: conceptual process flow modeling. Applied Mechanics And Materials, 145 . pp. 344-348. ISSN 1660-9336

Chong, Cheng Tung and Hochgreb, S. (2011) Measurements of laminar flame speeds of acetone/methane/air mixtures. Combustion and Flame, 158 (3). 490–500. ISSN 0010-2180

Chong, Cheng Tung and Hochgreb, S. (2011) Measurements of laminar flame speeds of liquid fuels: Jet-A1, diesel, palm methyl esters and blends using particle imaging velocimetry (PIV). Proceedings of the Combustion Institute, 33 (1). 979–986. ISSN 1540-7489

Chong, Chengtung and Hochgreb, Simone (2015) Spray and combustion characteristics of biodiesel: non-reacting and reacting. International Biodeterioration and Biodegradation, 102 (1). pp. 353-360. ISSN 0964-8305

Chong Cheng Tung, (2014) Effect of nitrogen dilution on the lean blowout limit and emissions of premixed propane/air swirl flame. Jurnal Teknologi, 71 (2). pp. 79-84. ISSN 0127-9696

Chong Cheng Tung, (2014) Flame and emission characteristics of a premixed swirl-stabilised burner. Jurnal Teknologi, 71 (2). pp. 43-48. ISSN 0127-9696

Christoph , Veyhl and Thomas, Fiedler and Tobias, Herzig and Andreas, Öchsner and Timo, Bernthaler and Irina, V. Belova and Graeme, E. Murch (2012) Thermal conductivity computations of sintered hollow sphere structures. Metals, 2 . pp. 113-121. ISSN 2075-4701

Chuan, Chin Wong and Ani, Farid Nasir (2007) The economic evaluation of the production of oil-palm-shell-based phenol. Jurnal Teknologi, 46 (A). pp. 43-52. ISSN 2180-3722

Chuan Pei, Lim and Md. Tap, Masine (2002) Improving productivity through line balancing : a case study. Jurnal Mekanikal (14). pp. 48-62. ISSN 0127-3396

Cossa, Nelson J. and Potty, Narayanan S. and Idrus, Arazi B. and Abdul Hamid, Mohd. Foad and Nizamani, Zafarullah (2012) Reliability analysis of jacket platforms in Malaysia-environmental load factors. Research Journal of Applied Sciences, Engineering and Technology, 4 (19). pp. 3544-3551. ISSN 2040-7459

D. Prayitno, D. Prayitno and Esah, Hamzah and Mohd. Ghazali, Mohd. Zulkifli and Clegg, A. J. (2001) Theoretical Approach On The Growth Rate Of Solidified Metal Interface. Jurnal Teknologi A (35A). pp. 47-56. ISSN 0127-9696

da Silva, L. F. M. and Öchsner, Andreas (2011) Guest editorial. International Journal of Adhesion and Adhesives, 31 (5). pp. 271-272. ISSN 0143-7496

Da Silva, L. F. M. and Öchsner, Andreas (2009) Special issue on durability of adhesive joints. International Journal of Adhesion and Adhesives, 29 (6). 593 -594. ISSN 0143-7496

da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. Journal of Adhesion, 88 (4-6). pp. 277-281. ISSN 0021-8464 (Print); 1545-5823 (Electronics)

Da Silva, Lucas F. M. and Oechsner, Andreas and Adams, Robert D. (2012) Special Issue: papers from the 1st International Conference on structural adhesive bonding (AB2011), Porto, Portugal, 7-8 July 2011. Journal Of Adhesion, 88 (4-6). pp. 277-281. ISSN 0021-8464

Da Silva, Lucas F. M. and Öchsner, Andreas and Adams, Robert D. (2012) Special issue: special issue on joint design 3. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shariff (2009) Control of vibrational power input to semi-infinite anisotropic beam. Jurnal Mekanikal (28). pp. 28-43. ISSN 0127-3396

Dahalan, Md. Nizam and Mansor, Shuhaimi and Ali, Muhammad Muzakkir Faiz (2015) Study the orifice effects of a synthetic jet actuator design. Jurnal Teknologi, 77 (8). pp. 99-105. ISSN 0127-9696

Dahalan, Md. Nizam and Mansor, Shuhaimi and Shaharudin, Muhammad Haniff and Ali, Airi (2012) Evaluation of synthetic jet actuators design performance. Aircraft Engineering and Aerospace Technology, 86 (4). 390 -397. ISSN 0002-2667

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shar (2009) Development of a computer program for rocket aerodynmic coefficients estimation. Jurnal Mekanikal, 28 . pp. 28-43. ISSN 0127-3396

Dahalan M.N., (2012) Cavity effect of synthetic jet actuators based on piezoelectric diaphragm. Applied Mechanics and Materials, 225 . pp. 85-90. ISSN 1660-9336

Dambatta, M. S. and Murni, N. S. and Sudin, Izman and Kurniawan, Denni and Froemming, Gabriele R. A. and Hermawan, Hendra (2015) In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (5). pp. 335-342. ISSN 0954-4119

Dambatta, M. S. and Sudin, Izman and Kurniawan, Denni and Farahany, Saeed and Yahaya, Bashir and Hermawan, Hendra (2015) Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn-3Mg alloy as potential biodegradable implant material. Materials and Design, 85 . pp. 431-437. ISSN 0264-1275

Dan'azumi, S. and Shamsudin, Supiah (2011) Modeling the distribution of inter-event dry spell for Peninsular Malaysia. Journal of Applied Sciences Research, 7 (3). pp. 333-339. ISSN 1816-157X

Daroonparvar, Mohammadreza and Hussain, Mohammad Sakhawat and Mat Yajid, Muhammad Azizi (2012) The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air. Applied Surface Science, 261 . pp. 287-297. ISSN 0169-4332

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza (2015) Fabrication and properties of triplex NiCrAlY/nano Al2O3 center dot 13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method. Journal of Alloys and Compounds, 645 . pp. 450-456. ISSN 0925-8388

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Adabi, Mohsen and Hamzah, Esah and Kamali, Hussein Ali (2015) Improvement of corrosion resistance of binary Mg-Ca alloys using duplex aluminum-chromium coatings. Journal of Materials Engineering and Performance, 27 (7). pp. 2614-2627. ISSN 1059-9495

Darus, Amer Nordin (2000) Streamlike function formulation of entry flow. Jurnal Mekanikal, 2 (10). pp. 73-92. ISSN 0127-3396

Darus, Amer Nordin and Yap, Yip Fatt (2008) Development of secondary flow in a curved rectangular duct. Jurnal Mekanikal (27). pp. 1-22. ISSN 0127-3396

Daud, Mohd. Fadzil and Mohd. Taib, Jamaluddin and Shariffudin, Rio Sumarni (2012) Assessing mechanical engineering undergraduates’ conceptual knowledge in three dimensional computer aided design (3D CAD). Procedia - Social and Behavioral Sciences, 56 . pp. 1-11. ISSN 1877-0428

Dawood, H. K. and Mohammed, Hussein A. and Che Sidik, Nor Azwadi and Munisamy, Kannan M. and Abdul Wahid, Mazlan (2015) Forced, natural and mixed-convection heat transfer and fluid flow in annulus: a review. International Communications in Heat and Mass Transfer, 62 . pp. 45-57. ISSN 0735-1933

Deirram, Nayeleh and Rahmat, Abdul Razak and Rashidi, Saba and Ghanbari1, Taravat and Moradpour, Mona (2012) Hydrolysis degradation of polycarbonate under microwave irradiation by using design of experiment software. Scientific Research and Essays, 7 (40). pp. 3399-3405. ISSN 1992-2248

Denni Kurniawan, (2014) Analysis of fiber glass/vinyl ester composite subjected to internal pressure loading for compressed natural gas tube type IV application. Applied Mechanics and Materials, 493 . pp. 645-650. ISSN 1660-9336

Denni Kurniawan, (2014) Effect of rare earth addition on microstructure and mechanical properties of Al-Si alloys: an overview. Advanced Materials Research, 845 . pp. 27-30. ISSN 1022-6680

E. M., Nazim and S., Izman and A., Ourdjini and T., Abubakar and H., Mas-Ayu (2014) Adhesion strength of HFCVD diamond coating on WC substrate seeded with diamond and different ratios of SiC powders. Advanced Materials Research, 845 . pp. 467-471. ISSN 1022-6680

Ehsan, Fallahiarezoudar and Mohaddeseh, Ahmadipourroudposht and Idris, Ani and Yusof, Noordin Mohd (2015) A review of: application of synthetic scaffold in tissue engineering heart valves. Materials Science and Engineering C, 48 . pp. 556-565. ISSN 0928-4931

El Seyed Nasef, Mohamed Mahmoud and Ahmed Aly, Amgad (2011) Water and charge transport models in proton exchange membranes: An overview. Desalination, 287 . pp. 238-246. ISSN 0011-9164

Elbatran, A. H. and Abdel Hamed, Mohamed Walid and Yaakob, Omar and Abdel Razak, Yasser Mohamed Ahmed and Ismail, M. Arif (2015) Hydro power and turbine systems reviews. Jurnal Teknologi, 74 (5). pp. 83-90. ISSN 2180-3722

Eldrainy, Yehia A. and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin (2008) Numerical investigation of the flow inside primary zone of tubular combustor model. Jurnal Mekanikal (26). pp. 162-176. ISSN 0127-3396

Eldrainy, Yehia A. and Muhamad Ridzwan, Johann Jeffrie and Mohd. Jaafar, Mohammad Nazri (2008) Prediction of the flow inside a micro gas turbine combustor. Jurnal Mekanikal (25). pp. 50-63. ISSN 0127-3396

Eldrainy, Y. A. and Saqr, K. M. and Aly, H. S. and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri (2011) Large eddy simulation and preliminary modeling of the flow downstream a variable geometry swirler for gas turbine combustors. International Communications in Heat and Mass Transfer, 38 (8). pp. 1104-1109. ISSN 0735-1933

Eldrainy, Yehia A. and Aly, Hossam S. and Saqr, Khalid M. and Mohd. Jaafar, Mohammad Nazri (2010) A multiple inlet swirler for gas turbine combustors. International Journal of Mechanical Systems Science and Engineering, 2 (2). pp. 106-109. ISSN 1307-7473

Eldrainy, Yehia A. and Saqr, Khalid M. and Aly, Hossam S. and Mohd. Jaafar, Mohammad Nazri (2009) CFD insight of the flow dynamics in a novel swirler for gas turbine combustors? International Communications in Heat and Mass Transfer, 36 (9). pp. 936-941. ISSN 07351933

Em, Poh Ping and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2012) Hardware-in-the-loop simulation of automatic steering control for double lane change and sine steer manoeuvres. International Journal of Vehicle Autonomous Systems, 10 (1-2). pp. 67-104. ISSN 1471-0226 (Print); 1741-5306 (Electronics)

Embi, Mohamed Rashid and Said, Suzana (2008) An information model for the traditional long-roof typed malay houses. Jurnal Alam Bina, 12 (3). pp. 19-54. ISSN 1511-1369

Emhemed A.A.A., (2012) Mathematical modeling of industrial heat exchanger system. Applied Mechanics and Materials, 229-23 . pp. 2122-2124. ISSN 1660-9336

Eng Eng , Quek and Yusof , Sha'ri (2003) A survey of TQM practices in the Malaysian electrical and electronic industry. Quality Assurance & Total Quality Management, 14 (1). pp. 63-77. ISSN 0954-4127

Esah Hamzah, (2014) Application of environmentally-friendly coatings toward inhibiting the microbially influenced corrosion (MIC) of steel: a review. Polymer Reviews, 54 (4). pp. 702-745. ISSN 1558-3724

Esah Hamzah, (2014) Bi-layer nano-TiO2/FHA composite coatings on Mg-Zn-Ce alloy prepared by combined physical vapour deposition and electrochemical deposition methods. Vacuum, 110 . pp. 127-135. ISSN 0042-207X

Esah Hamzah, (2014) Characterizations of zeolite, polyaniline and zeolite/polyaniline as antifouling materials for marine applications. Advanced Materials Research, 845 . pp. 91-95. ISSN 1022-6680

Esah Hamzah, (2014) Corrosion behavior of low carbon steel welded joint in NaCl solution. Advanced Materials Research, 845 . pp. 173-177. ISSN 1022-6680

Esah Hamzah, (2014) Corrosion behaviour of carbon steel in sea water medium in presence of P-aeruginosa bacteria. Arabian Journal For Science and Engineering, 39 (10). pp. 6863-6870. ISSN 1319-8025

Esah Hamzah, (2014) Effect of ageing temperatures on the transformation behaviour of ti-50.7at.%Ni shape memory alloy. Advanced Materials Research, 845 . pp. 108-112. ISSN 1022-6680

Esah Hamzah, (2014) Effect of heat treatment on the microstructure and corrosion behaviour of Mg-Zn alloys. Materials and Corrosion-Werkstoffe Und Korrosion, 65 (10). pp. 999-1006. ISSN 0947-5117

Esah Hamzah, (2014) Effect of variation in grain size on high temperature creep test of Fe-Ni-Cr alloy. Advanced Materials Research, 845 . pp. 51-55. ISSN 1022-6680

Esah Hamzah, (2014) Effects of Mn additions on the structure, mechanical properties, and corrosion behavior of Cu-Al-Ni shape memory alloys. Journal of Materials Engineering and Performance, 23 (10). pp. 3620-3629. ISSN 1059-9495

Esah Hamzah, (2014) Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg-Zn-Mn-Ca alloy. Surface & Coatings Technology, 258 . pp. 1090-1099. ISSN 0257-8972

Esah Hamzah, (2014) In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg-Ca alloys for biomedical applications. Ceramics International, 40 (6). pp. 7971-7982. ISSN 0272-8842

Esah Hamzah, (2014) In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite. Transactions of Nonferrous Metals Society of China, 24 (8). pp. 2516-2528. ISSN 1003-6326

Esah Hamzah, (2014) Influence of addition of carbon nanotubes on structure-properties of Cu-Al-Ni shape memory alloys. Materials Science and Technology (United Kingdom), 30 (4). pp. 458-464. ISSN 0267-0836

Esah Hamzah, (2014) Influence of silver nanoparticles addition on the phase transformation, mechanical properties and corrosion behaviour of Cu-Al-Ni shape memory alloys. Journal of Alloys and Compounds, 612 . pp. 471-478. ISSN 0925-8388

Esah Hamzah, (2014) Influence of Ti additions on the martensitic phase transformation and mechanical properties of Cu-Al-Ni shape memory alloys. Journal of Thermal Analysis and Calorimetry, 118 (1). pp. 111-122. ISSN 1388-6150

Esah Hamzah, (2014) Microbially influenced corrosion of steels by Pseudomonas aeruginosa. CORROSION REVIEWS, 32 (41702). p. 141. ISSN 0334-6005

Esah Hamzah, (2014) Microstructure and bio-corrosion behavior of Mg-Zn and Mg-Zn-Ca alloys for biomedical applications. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 65 (12). pp. 1178-1187. ISSN 0947-5117

Esah Hamzah, (2014) Phase evaluation of pure Mg, Mg-1Ca and Mg-1Ca-3Zn alloys by thermal analysis used in medical applications. Applied Mechanics and Materials, 606 . pp. 93-97. ISSN 1660-9336

Esmaeili, M. and Ochsner, Andreas (2011) A one-dimensional implementation of a coupled elasto-plastic model for ductile damage. Materialwissenschaft Und Werkstofftechnik, 42 (5). pp. 444-451. ISSN 0933-5137

Fadil, Nor Akmal and Govindachetty, Saravanan and Yoshikawa, Hideki and Yamashita, Yoshiyuki and Ueda, Shigenori and Kobayashi, Keisuke and Tanabe, Toyokazu and Hara, Toru and Gubbala, Venkata Ramesh and Murakami, Hideyuki and Noda, Kazuhiko and Abe, Hideki (2012) Wet chemical synthesis of ni-al nanoparticles at ambient condition. Advanced Materials Research, 557-59 . pp. 442-447. ISSN 1022-6680

Faizul Amri Adnan, (2014) Evaluation of service performances of Liquefied Natural Gas Carriers in actual seas. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 33-43. ISSN 0127-9696

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Mohd. Yusof, Noordin and Idris, Ani (2015) Fabrication (ferrofluid/polyvinyl alcohol) magnetic nanofibers via co-axial electrospinning. Journal of Dispersion Science and Technology, 36 (1). pp. 28-31. ISSN 0193-2691

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, MohaddesehNoordin and Mohd. Yusof, Noordi and Idris, Ani (2015) Influence of process factors on diameter of core (gamma-Fe2O3)/shell (polyvinyl alcohol) structure magnetic nanofibers during co-axial electrospinning. International Journal of Polymeric Materials and Polymeric Biomaterials, 64 (1). pp. 15-24. ISSN 0091-4037

Farahany, S. and Ourdjini, Ali and Idris, Mohd. Hasbullah (2012) The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al-Si alloys. Journal of Thermal Analysis and Calorimetry, 109 (1). pp. 105-111. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Farahany, S. and Ourdjini, Ali and Idris, Mohd. Hasbullah and Thai, L. T. (2011) Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys. Transactions of Nonferrous Metals Society of China (English Edition), 21 (7). pp. 1455-1464. ISSN 1003-6326

Farahany, Saeed and Idris, Mohd. Hasbullah and Ourdjini, Ali and Faris, Fadi and Ghandvar, Hamidreza (2015) Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis. Journal of Thermal Analysis and Calorimetry, 119 (3). pp. 1593-1601. ISSN 1388-6150

Faraji, Soheila and Faraji, Amir Hossein and Noori, Seyed Reza and Ani, Farid Nasir (2013) Investigation on electroless Cu-P-micro/nanoSiC composite coatings. Surface Engineering, 31 (3). pp. 179-188. ISSN 0267-0844

Farhanah, A. N. and Samion, Syahrullail and Musa, Md. Nor and Bahak, M. Z. (2015) Modification of RBD palm kernel and RBD palm stearin oil with ZDDP additive addition. Jurnal Teknologi, 74 (10). pp. 125-126. ISSN 2180-3722

Farid Nasir Ani, (2014) Application of ANN to predict S.I. engine performance and emission characteristics fuelled bioethanol. Applied Mechanics and Materials, 554 . pp. 454-458. ISSN 1660-9336

Farid Nasir Ani, (2014) Bio-oils characteristic from oil palm biomass from different fast pyrolysis techniques. Applied Mechanics and Materials, 554 . pp. 266-270. ISSN 1660-9336

Farid Nasir Ani, (2014) Bioethanol production from sago pith waste using microwave hydrothermal hydrolysis accelerated by carbon dioxide. Applied Energy, 128 . pp. 277-283. ISSN 0306-2619

Farid Nasir Ani, (2014) Comparing characteristics of oil palm biochar using conventional and microwave heating. Jurnal Teknologi (Sciences and Engineering), 68 (3). pp. 33-37. ISSN 2180-3722

Farid Nasir Ani, (2014) Corrosion characteristics of copper in Malaysian bioethanol and gasoline blends. Applied Mechanics and Materials, 467 . pp. 122-126. ISSN 1660-9336

Farid Nasir Ani, (2014) Date palm waste gasification in downdraft gasifier and simulation using ASPEN HYSYS. Energy Conversion and Management, 88 . pp. 693-699. ISSN 0196-8904

Farid Nasir Ani, (2014) Energy savings in air conditioning system using ejector: an overview. Applied Mechanics and Materials, 493 . pp. 93-98. ISSN 1660-9336

Farid Nasir Ani, (2014) Evaluation of the prospects of using solar thermal air-conditioning systems in Saudi Arabia. Applied Mechanics and Materials, 554 . pp. 271-275. ISSN 1660-9336

Farid Nasir Ani, (2014) Heterogeneous microwave irradiation biodiesel processing of jatropha oil. Applied Mechanics and Materials, 554 . pp. 500-504. ISSN 1660-9336

Farid Nasir Ani, (2014) Lubricity of palm fatty acid distillates at various rotational speeds. Applied Mechanics and Materials, 606 . pp. 9-13. ISSN 1660-9336

Farid Nasir Ani, (2014) Microwave thermal conversion of oil palm and related biomass for biofuels and biochars. Applied Mechanics and Materials, 606 . pp. 223-226. ISSN 1660-9336

Farid Nasir Ani, (2014) Microwave-assisted synthesis of metal oxide/hydroxide composite electrodes for high power supercapacitors - A review. Journal of Power Sources, 263 . pp. 338-360. ISSN 0378-7753

Fatihhi, S. J. and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Kamarul, T. and Öchsner, Andreas and Ardiyansyah, Syahrom (2015) Uniaxial and multiaxial fatigue life prediction of the trabecular bone based on physiological loading: a comparative study. Annals of Biomedical Engineering, 43 (10). pp. 2487-2502. ISSN 0090-6964

Fiedler, T. and Ochsner, Andreas (2007) Finite element analysis of the temperature dependent conductivity of metallic hollow sphere structures. The International Journal of Multiphysics, 1 (3). pp. 283-289. ISSN 1750-9548

Fiedler, T. and Belova, I. V. and Öchsner, A. and Murc, G. E. (2009) Non-linear calculations of transient thermal conduction in composite materials. Computational Materials Science, 45 (2). 434 -438. ISSN 0927-0256

Fiedler, T. and Ochsner, A. (2007) On the thermal conductivity of adhesively bonded and sintered Hollow Sphere Structures (HSS). Materials Science Forum, 553 . pp. 39-44. ISSN 978-0-87849-438-5

Fiedler, T. and Solórzano, E. and Garcia-Moreno, F. and Öchsner, A. and Belova, I. V. and Murch, G. E. (2009) Computed tomography based finite element analysis of the thermal properties of cellular aluminium. Materialwissenschaft und Werkstofftechnik, 40 (3). pp. 139-143. ISSN 09335137

Fiedler, Thomas and Löffler, Ralf B. and Bernthaler, Timo and Winkler, R. and Belova, Irina V. and Murch, Graeme E. and Öchsner, Andreas (2009) Numerical analyses of the thermal conductivity of random hollow sphere structures. Materials Letters, 63 (13-14). 1125 -1127. ISSN 0167-577X

Fiedler, Thomas and Ochsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Calculations of the effective thermal conductivity in a model of syntactic metallic hollow sphere structures using a lattice monte carlo method. Defect and Diffusion Forum, 273 . 216 -221. ISSN 1012-0386

Fiedler, Thomas and Solórzano, Eusebio and Garcia-Moreno, Francisco and Öchsner, Andreas and Belova, Irina V. and E. Murch, Graeme (2009) Lattice Monte Carlo and experimental analyses of the thermal conductivity of random-shaped cellular aluminum. Advanced Engineering Materials, 11 (10). pp. 843-847. ISSN 1438-1656

Fiedler, Thomas and Solorzano, Eusebio and Ochsne, Andreas (2008) Numerical and experimental analysis of the thermal conductivity of metallic hollow sphere structures. Materials Letters , 62 (8-9). pp. 1204-1207. ISSN 0167-577X

Fiedler, Thomas and Öchsner, Andreas (2008) On the anisotropy of adhesively bonded metallic hollow sphere structures. Scripta Materialia , 58 (8). 695 -698. ISSN 1359-6462

Fiedler, Thomas and Öchsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Recent advances in the prediction of the thermal properties of syntactic metallic hollow sphere structures. Advanced Engineering Materials, 10 (4). 361 -365. ISSN 1438-1656

Fiedler, Thomas and Öchsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Thermal conductivity enhancement of compact heat sinks using cellular metals. Diffusion In Solids And Liquids III, 273 . 222 -226. ISSN 1012-0386

Fiedler, Thomas and Öchsner, Andreas and Grácio, José (2007) Uniaxial elasto-plastic behavior of adhesively bonded Hollow Sphere Structures (HHS) : numerical simulations and experiments. Materials Science Forum, 539 . pp. 1874-1879. ISSN 1662-9752

Fiedler, Thomas and Öchsner, Andreas and Muthubandara, Nilindu and V. Belova, Irina and E. Murch, Graeme (2007) Calculation of the effective thermal conductivity in composites using finite element and Monte Carlo Methods. Materials Science Forum, 553 . pp. 51-56.

Fiedler, T. and Ochsner, Andreas (2008) Experimental analysis of the flexural properties of sandwich panels with cellular core materials. Materials Science and Engineering Technology, 39 (2). pp. 121-124. ISSN 0933-5137

Firouzabadi F., (2012) Dynamic response of laminated composite cylindrical shell subjected to pure impact. Applied Mechanics and Materials, 229-23 . pp. 2577-2581. ISSN 1660-9336

Firouzabadi F., (2012) Mechanical response of laminated composite cylindrical shell subjected to radial patch loading. Applied Mechanics and Materials, 229-23 . pp. 292-296. ISSN 1660-9336

Fitriadhy, Ahmad and Yasukawa, H. and Abdul Malik, Adi Maimun (2015) Theoretical and experimental analysis of a slack towline motion on tug-towed ship during turning. Ocean Engineering, 99 . pp. 95-106. ISSN 2784-343

Foo, Jin Hoe and Aizawa, Tatsuhiko and Yukawa, Satoru (2013) Synthesis and characterization of doped and undoped nano-columnar DLC coating. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 17-24. ISSN E-ISSN 2180-3722

Ghadimi, Pezhman and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2011) A Graphical User Interface (GUI) for assessing the sustainability level of manufacturing products: an automotive component case study. PERINTIS e-Journal, 1 . pp. 10-16. ISSN 2232-0725

Ghanaati, Ali and Mat Darus, Intan Zaurah and Muhammad Said, Mohd. Farid and Andwari, Amin Mahmoudzadeh (2015) A mean value model for estimation of laminar and turbulent flame speed in spark-ignition engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2224-2234. ISSN 2229-8649

Ghandvar, Hamidreza and Farahany, Saeed and Idris, Jamaliah (2015) Wettability enhancement of SiCp in cast A356/SiCp composite using semisolid process. Materials and Manufacturing Processes, 30 (12). pp. 1442-1449. ISSN 1042-6914

Ghavamian, Ali and Ochsner, Andreas (2012) Numerical investigation on the influence of defects on the buckling behavior of single-and multi-walled carbon nanotubes. Physica E: Low-Dimensional Systems and Nanostructures, 46 . pp. 241-249. ISSN 1386-9477

Ghazali, Mohd. Imran and Hassan, Azman and Ismail, Ahmad Fauzi (2007) Heat sealability of laminated films with LLDPE and LDPE as the sealant materials in bar sealing application. Journal of Applied Polymer Science, 104 (6). pp. 3736-3745. ISSN 0021-8995

Ghosh, Debasish and Ghosh, Pradip and Yusop, Mohd. Zamri and Tanemura, Masaki and Hayashi, Yasuhiko and Tsuchiya, Tetsuo and Nakajima, Tomohiko (2012) Transparent and flexible field emission display device based on single-walled carbon nanotubes. Physica Status Solidi-Rapid Research Letters, 6 (7). pp. 303-305. ISSN 1862-6254

Ghosh, Pradip and Mohd. Yusop, Mohd. Zamri and Ghosh, Debasish and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masak (2011) Direct fabrication of aligned metal composite carbon nanofibers on copper substrate at room temperature and their field emission property. Chemical Communications, 47 (16). pp. 4820-4822. ISSN 1359-7345

Ghosh, Pradip and Yusop, M. Zamri and Satoh, Syunsaku and Subramanian, Munisamy and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2010) Transparent and flexible field electron emitters based on the conical nanocarbon structures. Journal of the American Chemical Society, 132 (12). pp. 4034-4035. ISSN 0002-7863

Gohari, Soheil and Sharifi, Shokrollah and Vrcelj, Zora and Yahya, Mohd. Yazid (2015) First-ply failure prediction of an unsymmetrical laminated ellipsoidal woven GFRP composite shell with incorporated surface-bounded sensors and internally pressurized. Composites Part B: Engineering, 77 . pp. 502-518. ISSN 1359-8368

Golshan, Abolfazl and Gohari, Soheil and Ayob, Amran (2012) Multi-objective optimisation of electrical discharge machining of metal matrix composite Al/SiC using non-dominated sorting genetic algorithm. International Journal of Mechatronics and Manufacturing Systems, 5 (5-6). pp. 385-398. ISSN 1753-1039

Golshan, Abolfazl and Shirdar, Mostafa Rezazadeh and Sudin, Izman (2011) A comparison of optimization methods in cutting parameters using Non-Dominated Sorting Genetic Algorithm (Nsga-Ii) and Micro Genetic Algorithm (Mga). International Journal of Experimental Algorithms (IJEA), 2 (2). pp. 62-73. ISSN 2180-1282

Gromada, M. and Mishuris, Gennady and Ochsner, A. (2007) Necking in the tensile test. Correction formulae and related error estimation. Archives of Metallurgy and Materials , 52 (2). pp. 231-238. ISSN 1733-3490

H. Sait, Hani and Hussain, Ahmad and Adam Salema, Arshad and Ani, Farid Nasir (2012) Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis. Bioresource Technology, 118 . pp. 382-389. ISSN 0960-8524

Hadji, Saif Eddine and Kazi, Suhail and Tang, Howe Hing and Mohamed Ali, Mohamed Sultan (2015) A review: Simultaneous localization and mapping algorithms. Jurnal Teknologi, 73 (2). pp. 25-29. ISSN 1279-696

Haghighati, Razieh and Hassan, Adnan (2014) A conceptual methodology for recognition of constrained control chart patterns. Advanced Materials Research, 845 . pp. 696-700. ISSN 1022-6680

Hamada, S. and Hamada, H. and Suzuki, H. and Tamin, M. N. and Nozue, A. (2002) Microstructure and environment-dependent fatigue crack propagation properties of Ti-48Al intermetallics. Journal of Materials Science, 37 . pp. 1107-1113. ISSN 0022-2461

Hamedon Z., (2011) Performance of nitrogen gas as a coolant in machining of titanium. Advanced Materials Research, 264-26 . pp. 962-966. ISSN 1022-6680

Hamid Reza Bakhsheshi Rad, (2012) Characterization and corrosion behavior of biodegradable MG-CA and MG-CA-ZN implant alloys. Applied Mechanics And Materials, 121-12 . pp. 568-572. ISSN 1660-9336

Hamidi, Ehsan and Fazeli, Alireza and Mat Yajid, Muhamad Azizi and Che Sidik, Nor Azwadi (2015) Materials selection for hip prosthesis by the method of weighted properties. Jurnal Teknologi, 75 (11). pp. 1-9. ISSN 2180-3722

Hamidinezhad, H. and Wahab, Yussof and Othaman, Zulkafli and Ismail, Abd Khamim (2011) Influence of growth time on morphology and structural properties of silicon nanowires grown by VHF-PECVD. Journal of Crystal Growth, 332 (1). 007-011. ISSN 0022-0248

Hamidon Musa, (2014) Parametric study of powder mixed electrical discharge machining and mathematical modeling of SiSiC using copper electrode. Advanced Materials Research, 845 . pp. 878-882. ISSN 1022-6680

Hamzah, Esah and Purniawan, Agung and Mohd. Toff, Mohd. Radzi (2006) A review on the morphology of daimond thin film coating on various types of substrate materials. Jurnal Mekanikal (21). pp. 16-26. ISSN 0127-3396

Hamzah, E. and Kanniah, M. and Harun, M. (2009) Effect of beta phase on room to high temperature mechanical properties of as-cast gamma titanium aluminide. Mechanics of Advanced Materials and Structures, 16 (5). pp. 384-389. ISSN 1537-6494

Hamzah, E. and Prayitno, D. and Ghazali, M. Z. M. (2002) Effect of mould tilt angle on the mechanical properties of as-cast aluminum alloy. Materials & Design, 23 (2). pp. 189-194. ISSN 0261-3069

Hamzah, Esah and Ali, Mubarak L. and Ali, Nouman (2009) Adhesion strength of tin coatings at various ion etching deposited on tool steels using cathodic ARC PVD technique. Surface Review and Letters , 16 (1). pp. 29-35. ISSN 0218625X

Hamzah, Esah and Hastuti, Kurnia and Hashim, Jasmi (2014) Effect of ageing temperature on the microstructures and mechanical properties of Ti-Nb shape memory alloys. Advanced Materials Research, 1024 . pp. 304-307. ISSN 1022-6680

Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Corrosion protection of steels: a brief review on conductive polymers. Malaysian Polymer Journal, 7 (1). pp. 16-21. ISSN 1823-7789

Hamzah, Esah and Idris, Jamaliah and Gaius Debi, Eyu and Bishir, Usman (2012) Corrosion and corrosion mitigation of rebar in concrete exposed to marine environment - a review. Engineering Science and Technology: An International Journal (ESTIJ), 2 (5). pp. 900-907. ISSN 2250-3498 (Electronic) ; 2277-5293 (Print)

Hamzah, Esah and Kanniah, M. and Harun, M. (2007) Creep behavior of as-cast Ti-48Al-2Cr intermetallic alloy for aerospace and automotive applications. Materials and Manufacturing Processes, 22 (7). pp. 793-797. ISSN 1532-2475

Hamzah, Esah and Kanniah, M. and Harun, M. K. (2008) Effect of chromium addition on microstructure and creep strength of as-cast Ti-48Al alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 483-48 (1-2 C). 555 -559 . ISSN 0921-5093

Hamzah, Esah and Kanniah, Maiiyeaalagan (2005) Corrosion Behavior of low carbon steel sheets for car bodies. Jurnal Mekanikal (19). pp. 57-70. ISSN 0127-3396

Hamzah, Esah and M., Ali and I. A., Qazi and M. R. M., Toff (2010) Growth defects and surface roughness in TiN-coated tool steel at various N2 gas flow rates using cathodic arc PVD technique. Materials Science Forum, 636 (637). 965 - 970. ISSN 1662-9752

Hamzah, Esah and Nadlene, R. and Norliana, S. and Mohd. Irwan, M. A. (2011) Study on the effect of volume fraction of dual phase steel to corrosion behaviour and hardness. World Academy of Science, Engineering and Technology, 74 . pp. 570-573. ISSN 2010-376X

Hamzah, Esah and Parimin, N. and Amrin, A. (2014) Effect of grain size on the isothermal oxidation of Fe-33NI-19CR alloys at 700 °C. Advanced Materials Research, 845 . pp. 56-60. ISSN 1022-6680

Hamzah, Esah and Suardi, K. and Ourdjini, Ali (2005) Effect of microstructures on the hydrogen attack to gamma titanium aluminide at low temperature. Materials Science and Engineering A, 397 . pp. 41-49. ISSN 09215093

Hamzah, Esah and Sudin, Izman and Khoo, C. Y. (2008) A review on the rotary ultrasonic machining of advanced ceramics. Jurnal Mekanikal (25). pp. 9-23. ISSN 0127-3396

Hamzah, Esah and Yong, T. M. (2014) Effects of various seeding methods on multi-layered diamond coatings deposited via hot filament chemical vapor deposition. Advanced Materials Research, 845 . pp. 36-40. ISSN 1022-6680

Hamzah, E. and Suardi, K. and Qourdjini, Ali (2005) ffect of microstructures on the hydrogen attack to gamma titanium aluminide at low temperature. Materials science & engineering. A, Structural materials : properties, microstructure and processing , 397 . pp. 41-49. ISSN 0921-5093

Hamzah, E. and Kanniah, M. and Harun, M. (2007) Effect of chromium addition on microstructure, tensile properties and creep resistance of as-cast Ti-48Al alloy. Journal of Materials Science, 42 (21). pp. 9063-9069. ISSN 0022-2461 (Print) 1573-4803 (Online)

Hamzah, Esah and Qourdjini, Ali and Ali, Mubarak and Parvez, Akhter and Mohd Toff, Mohd Radzi and Abdul Hamid, Mansor (2007) Influence of nitrogen flow rate on friction coefficient and surface roughness of tin coatings deposited on tool steel using arc method. Surface Review and Letters , 14 (5). pp. 1007-1013. ISSN 0218-625X

Haque, K. M. A. and Hussain, M. S. and Alam, S. S. and Islam, S. M. S. (2010) Synthesis of nano-nickel by a wet chemical reduction method in the presence of surfactant (SDS) and a polymer (PVP). African Journal of Pure and Applied Chemistry, 4 (5). pp. 58-63. ISSN 1996-0840

Haris Ahmad Israr, (2014) Post-impact investigation of CFRP laminated plate. Jurnal Teknologi, 71 (2). pp. 71-78. ISSN 0127-9696

Haris Ahmad Israr Ahmad, (2014) Finite element simulation of 0 degrees/90 degrees CFRP laminated plates subjected to crushing using a free-face-crushing concept. Composites Part A: Applied Science and Manufacturing, 62 . pp. 16-25. ISSN 1359-835X

Haron, (2012) Parameterization method on b-spline curve. Mathematical Problems In Engineering . ISSN 1024-123X

Harun, Mokhtar N. and Wang, F. C. and Jin, Z. M. and Fisher, J. (2009) Long-term contact-coupled wear prediction for metal-on-metal total hip joint replacement. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (7). 993 -1001. ISSN 1350-6501

Harun, W. S. W. and Sharif, S. and Idris, M. H. and Kadirgama, K. (2009) Characteristic studies of collapsibility of ABS patterns produced from FDM for investment casting. Materials Research Innovations, 13 (3). pp. 340-343. ISSN 14328917

Hasan, Mohd. Faizal and Kuwabara, Masato and Kizu, Ryo and Yokomori, Takeshi and Ueda, Toshihisa (2012) Experimental study on a compact methanol steam reformer with Pd/Ag membrane. Journal of Thermal Science and Technology, 7 (1). pp. 135-150. ISSN 1880-5566

Hashemi-Dehkordi, S. M. and Mailah, Musa and Abu Bakar, Abd. Rahim (2009) Implementation of active force control to disc brake for noise-free performance. International Review of Mechanical Engineering, 3 (4). pp. 481-488. ISSN 1970-8734 (print) ; 1970-8742 (online)

Hashemi-Dehkordi, Sayed-Mahdi and Mailah, Musa and Abu Bakar, Abd Rahim (2009) An active control method to reduce friction induced vibration caused by negative damping. Jurnal Mekanikal (29). pp. 19-34. ISSN 0127-3396

Hashim, Jasmi (2001) The Production Of Cast Metal Matrix Composite By A Modified Stir Casting Method. Jurnal Teknologi A (35A). pp. 9-20. ISSN 0127-9696

Hashim, Azlina N. and Yaakob, O. B. and Koh, Khoking and Ismail, Nasrudin and Ahmed, Yasser Mohamed (2015) Review of micro-bubble ship resistance reduction methods and the mechanisms that affect the skin friction on drag reduction from 1999 to 2015. Jurnal Teknologi, 74 (5). pp. 105-114. ISSN 0127-9696

Haslenda Hashim, (2011) Renewable energy policies and initiatives for a sustainable energy future in Malaysia. Renewable and Sustainable Energy Reviews, 15 . pp. 4780-4787. ISSN 1364-0321

Hassan, A. and Nabi Bakhs, M.Sharisff and Shaharoun, A.M and Jamaluddin, H. (2003) Improved SPC chart pattern recognition using statistical features. International Journal of Production Research, 41 (7). pp. 1587-1603. ISSN 1366-588X

Hassan, Adnan and Nabi Baksh, Mohd Shariff and M. Shaharoun, Awaluddin (2000) Issues in quality engineering research. International Journal of Quality & Reliability Management, 17 (8). pp. 858-875. ISSN 0265-671X

Hassan, Azman and Wahit, Mat Uzir and Chee, Ching Yern (2003) Mechanical and morphological properties of PP/NR/LLDPE ternary blend - Effect of HVA-2. Polymer Testing, 22 (3). 281 -290. ISSN 0959–8103/2006

Hassan, Azmi and Saleh, Chairul and Baba, Md. Deros and Muniyandi, Saravanan (2001) Penggunaan Kaedah Ukur Rujuk Dalam Pemprosesan Seramik Bagi Meningkatkan Kualiti Dan Produktiviti. Jurnal Teknologi A (35A). pp. 57-70. ISSN 0127-9696

Hassan, Mohamad Zaki and Darus, Amer Nordin (2003) A thermoeconomic analysis for home air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 48-56. ISSN 1675-2228

Hassan, Adnan (2011) An improved scheme for online recognition of control chart patterns. International Journal of Computer Aided Engineering and Technology, 3 (3-4). pp. 309-321. ISSN 1757-2657 (Print); 1757-2665 (Online)

Hassan, Adnan and Masood, Ibrahim (2012) An integrated mewma-ann scheme towards balanced monitoring and accurate diagnosis of bivariate process mean shifts. Journal of king Saud University - Computer and Information Sciences, 24 (2). pp. 93-100. ISSN 1319-1578

Hassan, Mohd. Fahrul and Mat Saman, Muhamad Zameri and Sharif, Safian and Omar, Badrul (2012) Integration of morphological analysis theory and artificial neural network approach for sustainable product design: a case study of portable vacuum cleaner. International Journal of Sustainable Manufacturing, 2 (4). pp. 293-316. ISSN 1742-7223

Hayash, Jun’ichi and Horikawa, Toshihide and Takeda, Isao and Muroyama, Katsuhiko and Ani, Farid Nasir (2002) Preparing activated carbon from various nutshells by chemical activation with K2CO3. Carbon, 40 . pp. 2381-2386.

Heidari M., (2012) Biomechanical assessment of unconstrained elbow prosthesis after total elbow replacement: a finite element analysis. Applied Mechanics and Materials, 234 . pp. 1-10. ISSN 1660-9336

Heng, Limchoong and Al-Amin, Abul Quasem and Saidur, Rahman and Ward, Thomas Arthur (2015) Renewable energy choice: cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress and Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442

Henry Nasution, (2014) Driving efficiency through hydrocarbon for green car air conditioning. Applied Mechanics and Materials, 493 . pp. 45-49. ISSN 1660-9336

Henry Nasution, (2014) Energy analysis and compressor performance of refrigerator system using programmable logic control (PLC). Applied Mechanics and Materials, 554 . pp. 469-473. ISSN 1660-9336

Henry Nasution, (2014) Experimental investigation on the thermal insulation properties of eic-cellulose. Applied Mechanics and Materials, 554 . pp. 322-326. ISSN 1660-9336

Henry Nasution, (2014) Numerical analysis of modified ejector cycle on ejector as an expansion device on residential air conditioner. Applied Mechanics and Materials, 554 . pp. 261-265. ISSN 1660-9336

Henry Nasution, (2014) Numerical and experimental study of an ejector as an expansion device in split-type air conditioner for energy savings. Energy and Buildings, 79 . pp. 98-105. ISSN 0378-7788

Henry Nasution, (2014) Performance study of electric compressor in non-electric vehicle. Applied Mechanics and Materials, 554 . pp. 464-468. ISSN 1660-9336

Henry Nasution Azhar Abdul Aziz, (2011) Performance prediction of adiabatic capilary tube in refrigeration system: design of experiment approach. Teknomekanik Jurnal Teknik Mesin, 1979-6 (3). pp. 1-10.

Hishamuddin Jamaluddin, (2014) Analysis of the vibration behavior of FGM cylindrical shells including internal pressure and ring support effects based on Love-Kirchhoff theory with various boundary conditions. Journal of Mechanical Science and Technology, 28 (7). pp. 2759-2768. ISSN 1738-494X

Hishamuddin Jamaluddin, (2014) Dynamic response of commuter rail vehicle under lateral track irregularity. Applied Mechanics and Materials, 548-54 . pp. 948-952. ISSN 1662-7482

Hishamuddin Jamaluddin, (2013) Effects of ring support and internal pressure on the vibration behavior of multiple layered cylindrical shells. Advances In Mechanical Engineering, 2013 . ISSN 1687-8132

Hishamuddin Jamaluddin, (2014) Effects of uniform interior pressure distribution on vibration of FGM cylindrical shell with rings support based on first-order theory subjected to ten boundary conditions. ACTA Mechanica, 225 (7). pp. 2085-2109. ISSN 0001-5970

Hishamuddin Jamaluddin, (2014) Frequency analysis of multiple layered cylindrical shells under lateral pressure with asymmetric boundary conditions. Chinese Journal of Mechanical Engineering, 27 (1). pp. 23-31. ISSN 1000-9345

Hishamuddin Jamaluddin, (2014) Model-in-the-Loop Simulation of gap and torque tracking control using electronic wedge brake actuator. International Journal of Vehicle Safety, 7 (41702). pp. 390-408. ISSN 1479-3105

Hishamuddin Jamaluddin, (2014) Natural frequency characteristics of thin-walled homogeneous and manifold layered cylindrical shells under pressure using energy method. JOURNAL OF CENTRAL SOUTH UNIVERSITY, 21 (2). pp. 521-532. ISSN 2095-2899

Hishamuddin Jamaluddin, (2011) Simulation and experimental evaluation on a skyhook policy-based fuzzy logic control for semi-active suspension system. International Journal Structural Engineering, 1758-7 (2). pp. 243-272.

Hishamuddin Jamaluddin Jamaluddin Mohd. Syeriff, (2011) I. energy analysis of an air conditioning system using fuzzy logic control. Jurnal TELKOMNIKA, 1693-6 .

Hossain, K. A. and Mohd. Jaafar, M. N. and Appalanide, K. B. and Mustafa, A. and Ani, F. N. (2005) Application of urea based SNCR system in the combustion effluent containing low level of baseline nitric oxide. Enviromental Technology Selper Ltd, 26 (3). pp. 251-260. ISSN 0959-3330

Hossein Hosseini, S. M. and Kharaghani, A. and Kirsch, C. and Ochsner, Andreas (2011) Numerical investigation of the thermal properties of irregular foam structures. Defect and Diffusion Forum, 312-31 . pp. 941-946. ISSN 1012-0386

Hossein Seraj, (2011) Modeling and simulation of wet gas flow in venturi flow meter. Sensors and Transducers, 132 (9). pp. 57-68. ISSN 1726-5479

Hosseini, S. M. H. and Merkel, Markus and Augustin, Christian B. and Öchsner, Andreas (2008) Numerical prediction of the effective thermal conductivity of perforated hollow sphere structures. Defect and Diffusion Forum, 283 . 6 -12. ISSN 1012-0386

Hosseini, S. M. H. and Ochsner, Andreas and Fiedler, T. (2011) Numerical investigation of the initial yield surface of perforated hollow sphere structures (phss) in a primitive cubic pattern. Finite Elements in Analysis and Design, 47 (7). 804-811. ISSN 0168-874X

Hosseini, Seyed Ehsan and A. Wahid, Mazlan (2015) Utilization of biogas released from palm oil mill effluent for power generation using self-preheated reactor. Energy Conversion and Management, 105 . pp. 957-966. ISSN 0196-8904

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2013) Biogas utilization: experimental investigation on biogas flameless combustion in labscale furnace. Energy Conversion and Management, 74 . pp. 426-432. ISSN 0196-8904

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2012) Necessity of biodiesel utilization as a source of renewable energy in Malaysia. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5732-5740. ISSN 1364-0321

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Ali Abuelnuor, Abuelnuor Abdeen (2012) High temperature air combustion: sustainable technology to low No x formation. International Review of Mechanical Engineering, 6 (5). pp. 947-953. ISSN 1970-8734

Hosseini, Seyed Ehsan and Mazlan, Abdul Wahid and Jamil, Muhammad Mahmud and Mohd. Azli, Anis Athirah and Misbah, Mohamad F. (2015) A review on biomass-based hydrogen production for renewable energy supply. International Journal of Energy Research, 39 (12). pp. 1597-1615. ISSN 0363-907X

Hosseini S.E., (2012) Pollutant reduction and energy saving in industrial sectors by applying high temperature air combustion method. International Review of Mechanical Engineering, 6 (7). pp. 1667-1672. ISSN 1970-8734

Hourmand, Mehdi and Farahany, Saeed and Sarhan, Ahmed A. D. and Noordin, Mohd. Yusof (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR-RSM approach. International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768

Hudha, K. and Jamaluddin, H. and Samin, P. M. and Rahman, R. A. (2008) Non-parametric linearised data driven modelling and force tracking control of a magnetorheological damper. International Journal of Vehicle Design 2008, 46 (2). pp. 250-269.

Hudha, Khisbullah and Jamaluddin, Hishammudin and Mohd Samin, Pakharuddin (2008) Disturbance rejection control of a light armoured vehicle using stability augmentation based active suspension system. International Journal of Heavy Vehicle Systems , 15 (2-4). 152-169 . ISSN 1744-232X

Hussain, A. and Ani, F. N. and Darus, A. N. (2008) Gas-solid flow modelling in a circulating fluidized bed. International Journal of Modelling and Simulation .

Hussain, Ahmed and Ani, Farid Nasir and Darus, Amer Nordin (2005) CFD flow modeling of riser exit geometries of a circulating fluidized bed. Mehran University Research Journal of Engineering & Technology, 24 (3). ISSN 0254-7821

Hussain, Ahmad and Nasir Ani, Farid and Darus, Amer Nordin and Ahmad, Zainal and Mustafa, Azeman (2005) Turbulence modeling in the riser of a circulating fluidized bed using CFD sottware. The Malaysian Journal of Analytical Sciences, 9 (3). pp. 418-425. ISSN 1394-2506

Hussain, M. S. and Haque, K. M. A. (2010) Synthesis of nanoaggregated nickel particles by a chemical process. Materials Technology: Advanced Performance Materials, 25 (5). pp. 289-291. ISSN 1066-7857

Hussain, Mohammad Sakhawat (2010) Electroforming a process for macro/nano-manufacturing. Int J of Nanomanufacturing, 14 (1/2/3/). 324 - 333.

Hussain, Mohammad Sakhawat and Anamoul Haque, Kaz Mohammad and Ghihab, Abdul Rahman (2010) Nano-sized agglomerated Ni particles synthesized by a phase transformation method. International Journal of Nanoparticles, 4 (1). 33 - 44. ISSN 1753-2507

Hussain, Mohammad Sakhawat and Haque, K. M. A. (2010) Synthesis of nano-sized nickel particles by a bottom-up approach in the presence of an anionic surfactant and a non-ionic polymer. Journal of Scientific Research, 2 (2). pp. 313-321. ISSN 2070-0237 (Print) ; 2070-0245 (Electronic)

Hussein, S. B. and Jamaluddin, H. and Mailah, M. and Zalzala, A. M. S. (2000) Hybrid intelligent active force controller for robot arms using evolutionary neural networks. Proceedings of the IEEE Conference on Evolutionary Computation, ICEC, 1 . pp. 117-124.

Hussein, Shamsul Bahri and Jamaluddin, Hishamuddin and Mailah, Musa (1999) An intelligent method to estimate the inertia matrix of a robot arm for active force control using on-line neural network training scheme. Jurnal Mekanikal (8). ISSN 0127-3396

Hussein, A. K. and Ahmed, S. E. and Saha, S. and Hasanpour, A. and Hussein, Mohammed and Kolsi, L. and Adegun, I. (2012) MHD natural convection inside an inclined trapezoidal porous enclosure with internal heat generation or absorption subjected to isoflux heating. Heat Transfer - Asian Research, 41 (6). pp. 498-515. ISSN 1099-2871

Hussein, Mohamed (2013) PID control of an electro-mechanical friction clutch. International Journal of System Applications, Engineering & Development , 7 (3). pp. 122-129. ISSN 2074-1308

Hussein A. Mohammed, (2014) Boundary layer flow and heat transfer due to permeable stretching tube in the presence of heat source/sink utilizing nanofluids. Applied Mathematics and Computation, 238 . pp. 149-162. ISSN 0096-3003

Hussein A. Mohammed, (2014) Combined convection nanofluid flow and heat transfer over microscale forward-facing step. International Journal of Nanoparticles, 7 (1). pp. 21-5. ISSN 1753-2515

Hussein A. Mohammed, (2014) Computational analysis of three-dimensional unsteady natural convection and entropy generation in a cubical enclosure filled with water-Al2O3 nanofluid. Arabian Journal For Science and Engineering, 39 (11). p. 7493. ISSN 1319-8025

Hussein A. Mohammed, (2014) Experimental and numerical study of nanofluid flow and heat transfer over microscale backward-facing step. International Journal of Heat and Mass Transfer, 79 . pp. 858-867. ISSN 0017-9310

Hussein A. Mohammed, (2014) Experimental and numerical study of nanofluid flow and heat transfer over microscale forward-facing step. International Communications in Heat and Mass Transfer, 57 . pp. 319-329. ISSN 0735-1933

Hussein A. Mohammed, (2014) Heat transfer and fluid flow characteristics in helically coiled tube heat exchanger (HCTHE) using nanofluids: a review. Journal of Computational and Theoretical Nanoscience, 11 (4). pp. 911-927. ISSN 1546-1955

Hussein A. Mohammed, (2014) Heat transfer augmentation using nanofluids in an elliptic annulus with constant heat flux boundary condition. Case Studies in Thermal Engineering, 4 . pp. 32-41. ISSN 2214-157X

Hussein A. Mohammed, (2014) Heat transfer enhancement by using different types of inserts. Advances in Mechanical Engineering . ISSN 1687-8132

Hussein A. Mohammed, (2014) Heat transfer enhancement using nanofluids in a circular tube fitted with inserts. Journal of Computational and Theoretical Nanoscience, 11 (3). pp. 655-666. ISSN 1546-1955

Hussein A. Mohammed, (2014) Influence of geometrical parameters of hexagonal, circular, and rhombus microchannel heat sinks on the thermohydraulic characteristics. International Communications in Heat and Mass Transfer, 52 . pp. 121-131. ISSN 0735-1933

Hussein A. Mohammed, (2014) Laminar nanofluid flow over periodic two dimensional rectangular baffled channels. Journal of Computational and Theoretical Nanoscience, 11 (4). pp. 1018-1030. ISSN 1546-1955

Hussein A. Mohammed, (2014) Mixed convection heat transfer of nanofluids over backward facing step having a slotted baffle. Applied Mathematics and Computation, 240 . pp. 368-386. ISSN 0096-3003

Hussein A. Mohammed, (2014) Mixed convection over a backward-facing step in a vertical duct using nanofluids-buoyancy opposing case. JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 11 (3). pp. 860-872. ISSN 1546-1955

Hussein A. Mohammed, (2014) Numerical and experimental investigation of heat transfer enhancement in a microtube using nanofluids. International Communications in Heat and Mass Transfer, 59 . pp. 88-100. ISSN 0735-1933

Hussein A. Mohammed, (2014) Numerical investigation of combined convection and nanofluids flow over backward facing step in a channel having a blockage. Journal of Computational and Theoretical Nanoscience, 11 (4). pp. 971-980. ISSN 1546-1955

Hussein A. Mohammed, (2014) Numerical study of thermal enhancement in micro channel heat sink with secondary flow. International Journal of Heat and Mass Transfer, 78 . pp. 216-223. ISSN 0017-9310

Hussin, M. H. and Abu Bakar, A. R. and Jamaluddin, M. R. and Szlapka, R. (2010) Effects of lining thickness on squeal in drum brake assembly: experimental investigations. Int. J. Vehicle Structures & Systems, 2 (2). 69 -73. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Hussin, Rosli and Husin, Muhammad Shawal and Abdul Halim, Dayang Nur Fazliana and Hamdan, Sinin (2010) Vibrational studies of crystalline phase strontium magnesium phosphates doped with Eu2O3. Solid State Science and Technology Letters, 18 (1). pp. 288-301. ISSN 0128-7389

I. Kassem, Hassan and M. Saqr, Khalid and Mohd. Sies, Mohsin and Abdul Wahid, Mazlan (2012) Integrating a simplified P-N radiation model with edmfoam1.5: model assessment and validation. International Communications in Heat and Mass Transfer, 39 (5). pp. 697-704. ISSN 0735-1933

Ian, (2012) Finite element stress analysis of optical fiber due to mechanical expansion of hydrogel coating. Applied Mechanics And Materials, 110-11 . pp. 2432-2436. ISSN 1660-9336

Ibrahim, Ahmad Azlan Shah and Mohd. Jaafar, Mohammad Nazri (2008) Power estimation for four seater helicopter. Jurnal Mekanikal (27). pp. 78-90. ISSN 0127-3396

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding with multiple performance characteristics using grey relational grade. Chiang Mai Journal Of Science, 38 (2). pp. 231-241. ISSN 0125-2526

Ibrahim, Mustafa K. and Idris, Jamaliah (2015) Influence of milling time on growth morphology and mechanical properties of aluminum-silicon-carbide composites. Jurnal Teknologi, 76 (1). pp. 201-205. ISSN 2180–3722

Ibrahim Ngah, (2013) Facilitating earthquake-affected rural women communities toward sustainable livelihoods and agriculture. Agroecology and Sustainable Food Systems, 37 (5). pp. 592-613. ISSN 2168-3565

Idris, A. and Mat Zain, N. and Nordin, M. Y. (2007) Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, 207 . pp. 324-339. ISSN 0011-9164

Idris, Jamaliah and Teoh, T. L. (1998) The use of scanning acoustic microscope for flaw detection in metallic materials. Jurnal Mekanikal, 1 (5). pp. 48-60. ISSN 0127-3396

Idris, Jamaliah (2005) The effect of Sol-Gel technique on the aluminium-SiCp composite. Jurnal Mekanikal (19). pp. 11-21. ISSN 0127-3396

Idris, Mohd. Hasbullah and Bakhsheshi Rad, Hamid Reza and Monshi, Ahmad and Abdul Kadir, Mohammed Ra?q and Jafari, Hassan (2011) Premature failure analysis of forged cold back-up roll in a continuous tandem mill. Materials and Design, 32 (8-9). pp. 4376-4384. ISSN 0261-3069

Idris, Roslinda and Prawoto, Yunan (2012) Influence of ferrite fraction within martensite matrix on fatigue crack propagation: an experimental verification with dual phase steel. Materials Science and Engineering A, 552 . pp. 547-554. ISSN 0921-5093

Idris, Ani and Mat Zain, Norashikin and M. Y., Noordin (2007) Synthesis, characterization and Performance of Asymmetric Polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, 207 . pp. 324-339. ISSN 0011-9164

Intan Zaurah Mat Darus, (2014) Active roll control strategy using fuzzy logic control active suspension. WSEAS Transactions on Systems and Control, 9 (1). pp. 566-573. ISSN 1991-8763

Intan Zaurah Mat Darus, (2014) Active vortex induced vibration controller and Neuro identification for Marine Risers. Journal of Theoretical and Applied Information Technology, 70 (1). pp. 153-162. ISSN 1992-8645

Intan Zaurah Mat Darus, (2014) Development of fuzzy logic controller by particle swarm optimization algorithm for semi-active suspension system using magneto-rheological damper. WSEAS Transactions on Systems and Control, 9 . pp. 77-85. ISSN 2224-2856

Intan Zaurah Mat Darus, (2014) Dynamic modelling of an automotive variable speed air conditioning system using nonlinear autoregressive exogenous neural networks. Applied Thermal Engineering, 73 (1). pp. 1255-1269. ISSN 1359-4311

Intan Zaurah Mat Darus, (2014) Finite element method to dynamic modelling of an underwater flexible single-link manipulator. Journal of Vibroengineering, 16 (7). pp. 3620-3636. ISSN 1392-8716

Intan Zaurah Mat Darus, (2014) Fuzzy-PID controller on ANFIS, NN-NARX and NN-NAR system identification models for cylinder vortex induced vibration. Journal of Vibroengineering, 16 (7). pp. 3184-3196. ISSN 1392-8716

Intan Zaurah Mat Darus, (2013) Harnessing energy from mechanical vibration using non-adaptive circuit and smart structure. International Review of Mechanical Engineering, 7 (5). pp. 832-840. ISSN 1970-8734

Intan Zaurah Mat Darus, (2014) Intelligent parametric identification of flexible manipulator system. International Review of Mechanical Engineering, 8 (1). pp. 11-21. ISSN 1970-8734

Intan Zaurah Mat Darus, (2014) Neuro identification for flexible cantilever beam structure. International Review on Modelling and Simulations, 7 (2). pp. 341-349. ISSN 1974-9821

Intan Zaurah Mat Darus, (2014) PID controller for NARX and ANFIS models of marine pipe cylinder undergoes vortex induced vibration. Journal of Theoretical and Applied Information Technology, 66 (1). pp. 359-367. ISSN 1992-8645

Intan Zaurah Mat Daud, (2014) Application of adaptive neural predictive control for an automotive air conditioning system. Applied Thermal Engineering, 73 (1). pp. 1244-1254. ISSN 1359-4311

Ishak, Idris and Abu Hassan, Shukur (1997) Pembangunan konsep reka bentuk prototaip kereta Formula-M. Jurnal Mekanikal, 1 (3). pp. 17-35. ISSN 0127-3396

Ishak, Idris and Abu Hassan, Shukur (1997) Pembuatan panel badan kereta lumba Formula-M daripada bahan polimer komposit (GFRP). Jurnal Mekanikal, 2 (4). pp. 52-63. ISSN 0127-3396

Ishak, Iskandar Shah and Mat, Shabudin and Mat Lazim, Tholudin and Muhammad, Mohd. Khir and Mansor, Shuhaimi and Awang, Mohd Zailani (2006) Estimation of Aerodynamic Characteristics of a Light Aircraft. Jurnal Mekanikal (22). pp. 64-74. ISSN 0127-3396

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2007) Noxious emission reduction from liquid fuel burner via air staging method. Jurnal Mekanikal (24). pp. 40-46. ISSN 0127-3396

Ishak, Mohmad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2008) The influence of orifice insertionin radial swirling flow for low emissions combustion. Jurnal Mekanikal (26). pp. 96-106. ISSN 0127-3396

Ishak, Iskandar Shah and Alias, Rose Alinda and Adam, U. and Suradi, Z. (2013) ICT strategic planning in malaysia public research institute. International Journal of e-Education, e-Business, e-Management and e-Learning, 3 (5). pp. 391-396. ISSN 2010-3654

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri and Wan Omar, Wan Zaidi (2015) Numerical analysis of effect of preheat and swirl of inlet air on temperature profile in canister burner. Jurnal Teknologi, 72 (4). pp. 27-34. ISSN 2180-3722

Ishak M.S.A., (2012) Design of palm envo-diesel gas turbine combustion test rig. International Review of Mechanical Engineering, 6 (7). pp. 1673-1680. ISSN 1970-8734

Ishak M.S.A., (2012) Feasibility study of using jatropha (jatropha curcas) oil as bio-diesel on an oil firing burner system. International Review of Mechanical Engineering, 6 (6). pp. 1302-1306. ISSN 1970-8734

Ishak M.S.A., (2012) Numerical and experimental study on droplet size of kerosene fuel. International Review of Mechanical Engineering, 6 (7). pp. 1593-1600. ISSN 1970-8734

Islam, M. Rafiqul and Ibn Awal, Zobair (2008) A study on ship capsizing due to collision. Jurnal Mekanikal (26). pp. 22-36. ISSN 0127-3396

Islam, Mohammad Nurul and R. , Zailani and Ani, Farid Nasir (1999) Pyrolytic oil from fluidised bed pyrolysis of oil palm shell and its characterisation. Renewable Energy, 17 (1). pp. 73-84. ISSN 0960 - 1481

Ismail, Yob Saed and Abu Hassan, Shukur and Abd. Kader, Abd. Saman and Chong, Chin Lee (2004) The mode II interlaminar fracture testing of glass fibre reinforces thermoset composites. Jurnal Mekanikal (17). pp. 87-98. ISSN 0127-3396

Ismail, A. R. and Rani, M. R. A. and Makhbul, Z. K. M. and Sopian, K. and Tahir, M. M. and Ghani, J. A. and Meier, C. (2009) Optimization of environmental factors: a study at Malaysian automotive industry. European Journal of Scientific Research, 27 (4). 500 -509. ISSN 1450-202X

Ismail, A. R. and Rani, M. R. A. and Makhbul, Z. K. M. and Sopian, Kamaruzzaman and Md Deros, Baba (2009) Thermal comfort assessment and optimization of environmental factors by using taguchi method. American Journal of Applied Sciences, 6 (9). 1731 -1741. ISSN 1546-9239

Ismail, Kamariah and Leow, Y. R. and Yong, C. Y. and Abdul Majid, I. and Thwala, W. D. and Ajagbe, M. A. (2012) Critical success factors of new product development in technology based firms: a case study. African Journal of Business Management, 6 (33). pp. 9442-9451. ISSN 1993-8233

Ismail, Kamariah and Wan Omar, Wan Zaidi and Abdul Majid, Izaidin (2011) The commercialisation process of patents by universities. African Journal of Business Management, 5 (17). pp. 7195-7208. ISSN 1993-8233

Ismail, Muhammad Izzal and Costall, Aaron W. and Martines-Botas, Ricardo and Rajoo, S. (2015) Turbocharger matching method for reducing residual concentration in a turbocharged gasoline engine. SAE Technical Papers, 2015 . ISSN 0148-7191

Ismail, Napsiah and Abu Bakar, Nooh and Juri, Abdul Hakim (2004) Recognition of cylindrical-based features using edge boundary technique for integrated manufacturing. Robotics and Computer-Integrated Manufacturing, 20 (5). pp. 417-422. ISSN 07365845

Ismail, Norasyikin and Ani, Farid Nasir (2015) A review on plasma treatment for the processing of solid waste. Jurnal Teknologi, 75 (2). pp. 41-49. ISSN 0127-9696

Ismail, Syuhaida and Durdyev, Serdar (2012) Pareto analysis of on-site productivity constraints and improvement techniques in construction industry. Journal of Scientific Research and Essay, 7 (4). pp. 1-10. ISSN 1992-2248

Ismail, Syuhaida and Durdyev, Serdar (2012) Role of the construction industry in economic development of Turkmenistan. Journal of Energy, Education, Science and Technology (EEST) Part A: Energy Science and Research 28 (2012), 29 (2). pp. 883-890. ISSN 1308-772X

Ismail, Issham and Teow, Andrew Ket Seang (2002) The study of formation damage by custom fabricated rig. Oil & Gas Symposium 2002 .

Ismail, N. and Abu Bakar, N. and Juri, A.H. (2005) Recognition of Cylindrical and Conical Features Using Edge Boundary Classification. International Journal of Machine Tools and Manufacture, 45 . pp. 649-655. ISSN 08906955

Izman, (2012) Doe analysis of the influence of sand size and pouring temperature on porosity in LFC. Applied Mechanics And Materials, 121-12 . pp. 2661-2665. ISSN 1660-9336

Izman, (2012) Effect of casting parameters on porosity in LFC. Applied Mechanics And Materials, 148-14 . pp. 1198-1201. ISSN 1660-9336

Izman, S. and Tamin, Mohd. Nasir and Venkatesh, V. C. and Mon, T. T. (2009) Evaluation of a material flow stress model adopted in finite element modeling of metal cutting. International Journal for Manufacturing Science and Technolog, 9 (2). pp. 67-73. ISSN 1524-1548

Izman Sudin, (2014) Anti-corrosive performances of environmental friendly materials on Al-Mg-Si alloy. Advanced Materials Research, 1025-1 . pp. 668-671. ISSN 1022-6680

Izman Sudin, (2014) Crystalline ha coating on peek via chemical deposition. Applied Surface Science, 314 . pp. 1034-1040. ISSN 0169-4332

Izman Sudin, (2014) Effect of butt joint on mechanical properties of welded low carbon steel. Advanced Materials Research, 845 . pp. 775-778. ISSN 1022-6680

Izman Sudin, (2014) Effect of heat treatment on microstructure homogeneity of Zn-3Mg alloy. Applied Mechanics and Materials, 493 . pp. 777-782. ISSN 1660-9336

Izman Sudin, (2014) Effects of friction modifier additives on HDD substrate defects and surface topography during CMP. Advanced Materials Research, 845 . pp. 894-898. ISSN 1022-6680

Izman Sudin, (2014) Estimation of charge mass for high speed forming of circular plates using energy method. Advanced Materials Research, 845 . pp. 803-808. ISSN 1022-6680

Izman Sudin, (2014) Influence of bias voltage on corrosion resistance of TiN coated on biomedical TiZrNb alloy. Advanced Materials Research, 845 . pp. 436-440. ISSN 1022-6680

Izman Sudin, (2014) Influence of carbon concentrations in reducing Co and Cr ions release in cobalt based implant: a preliminary report. Advanced Materials Research, 845 . pp. 462-466. ISSN 1022-6680

Izman Sudin, (2014) Influence of heat treatment cooling mediums on the degradation property of biodegradable Zn-3Mg alloy. Advanced Materials Research, 845 . pp. 7-11. ISSN 1022-6680

Izman Sudin, (2014) Microwave hybrid heating of materials using susceptors - A brief review. Advanced Materials Research, 845 . pp. 426-430. ISSN 1022-6680

Izman Sudin, (2014) Multi-objective process optimization of wire electrical discharge machining based on response surface methodology. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 36 (2). pp. 301-313. ISSN 1678-5878

J. R., Ayu Bidiawati and Mohd. Yusof, Sha'ri and Nabi Baksh, Mohamed Shariff (2004) Penjadualan preemption menggunakan aturan pelepasan berprioriti dalam sistem bergangguan. Jurnal Mekanikal (17). pp. 48-55. ISSN 0127-3396

Jackson, M. J. and Khangar, A. and Chen, X. and Robinson, G. M. and Venkateshd, V. C. and Dahotreb, N. B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (30). pp. 17-23.

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, A. and Rahimi, H. and Ghobadian, B. (2011) EIS study of corrosion behavior of metallic materials in ethanol blended gasoline containing water as a contaminant. Fuel, 90 (3). pp. 1181-1187. ISSN 0016-2361

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Abdul Kadir, Mohammed Rafiq (2012) Characterization of AZ91D granules covered with a flux during in-situ melting. Particle & Particle Systems Characterization, 29 (4). pp. 263-272. ISSN 0934-0866

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Farahany, Saeed (2012) In-situ melting assessment of AZ91D granules by thermal analysis. Advanced Science Letters, 14 (1). pp. 295-298. ISSN 1936-6612

Jafri, Mohd. Rohani and Chan, Kok Teng (2001) Improving Quality With Basic Statistical Process Control (SPC) Tools: A Case Study. Jurnal Teknologi A (35A). pp. 21-34. ISSN 0127-9696

Jafri Mohd. Rohani, (2014) Anthropometric data reduction using confirmatory factor analysis. Work-A Journal of Prevention Assessment & Rehabilitation, 47 (2). pp. 173-181. ISSN 1051-9815

Jafri Mohd. Rohani, (2014) Back pain arising from schoolbag usage among primary schoolchildren. International Journal of Industrial Ergonomics, 44 (4). pp. 590-600. ISSN 0169-8141

Jafri Mohd. Rohani, (2014) Comparison of different scenarios using computer simulation to improve the manufacturing system productivity: case study. Advanced Materials Research, 845 . pp. 770-774. ISSN 1022-6680

Jafri Mohd. Rohani, (2014) Development of road safety sustainability model for Malaysian road. Applied Mechanics and Materials, 606 . pp. 235-239. ISSN 1660-9336

Jafri Mohd. Rohani, (2014) Evaluating the effect of main factors in manufacturing production line based on simulation experiment. Applied Mechanics and Materials, 606 . pp. 199-203. ISSN 1660-9336

Jafri Mohd. Rohani, (2014) Improving productivity in a bank system by using computer simulation. Applied Mechanics and Materials, 606 . pp. 259-263. ISSN 1660-9336

Jafri Mohd. Rohani, (2014) Lean manufacturing implementation through value stream mapping: a case study. Jurnal Teknologi (Sciences and Engineering), 68 (3). pp. 119-124. ISSN 2180-3722

Jafri Mohd. Rohani, (2014) Performance improvement of concrete pouring process based resource utilization using Taguchi method and computer simulation. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 17-24. ISSN 2180-3722

Jailani, Mohd. Anuar and Mohd. Jaafar, Mohammad Nazri (1999) Emisi ekzos dari kenderaan bermotor, kesannya ke atas atmosfera dan kaedah pengurangannya : satu kajian. Jurnal Mekanikal (8). ISSN 0127-3396

Jamaliah Idris, (2014) Hygrothermal response of plant fibre reinforced composites. ARPN Journal of Engineering and Applied Sciences, 9 (3). pp. 336-341. ISSN 1819-6608

Jamaliah Idris, (2014) Oil spills hazard and sustainable mitigation approach: a review. Advanced Materials Research, 845 . pp. 955-959. ISSN 1022-6680

Jamaliah Idris, (2014) A preliminary study of biodegradable waste as sorbent material for oil-spill cleanup. Scientific World Journal . ISSN 1537-744X

Jamaluddin, H. and Samad, M. F. A. and Ahmad, R. and Yaacob, M. S. (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 221 . pp. 975-989. ISSN 0959-6518

Jamaluddin, Hishamuddin and Em, Poh Ping and Hudha, Hudha (2010) Hardware-in-the-loop simulation of automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Vehicle Safety, 5 (1). 35 - 59. ISSN 1479-3105

Jamaluddin, Hishamuddin and F., Imaduddin and K., Hudha and I., J. (2011) Simulation and experimental investigation on adaptive multi-order proportional-integral control for pneumatically actuated active suspension system using knowledge-based fuzzy. International Journal of Modelling, Identification and Control, 14 (40545). pp. 73-92. ISSN 17466172

Jamaluddin Md. Sheriff, (2014) Application of solar energy for water supply and sanitation in arsenic affected remote areas: a case of Bataiwa, Nigeria. Jurnal Teknologi (Sciences and Engineering), 68 (3). pp. 39-43. ISSN 2180-3722

Jamaluddin Md. Sheriff, (2014) Effect of cross wind, nozzle angle and height on the performance of broadcasting spraying system. Advances in Environmental Biology, 8 (3). pp. 648-653. ISSN 1998-1066

Jamaluddin, Hishamuddin and Abd. Samad, M. F. and Ahmad, Robiah and Yaacob, M. S. (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. Journal of Systems and Control Engineering, 221 (7). pp. 975-989. ISSN 0959-6518

Jamaludin, Khairur Rijal (2002) The application of ultrasound at high temperature. Jurnal teknikal dan kajian sosial, 2 (1). pp. 120-137. ISSN 1675-2228

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ismail, Muhammad Hussain and Ibrahim, Murtadhahadi (2008) Particle size and injection temperature effect on the injection molding of SS316l powder. Journal of Mechanical Engineering , 5 (1). pp. 59-71. ISSN 1823-5514

Jamaludin, Khairur Rijal and Muhamad, N. and Abolhasani, H. and Murtadhahadi, Murtadhahadi and Ab. Rahman, M. N. (2011) An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock. Advanced Materials Research, 264 (26). pp. 554-558. ISSN 1022-6680

Jamaludin, Khairur Rijal and Muhamad, N. and Ahmad, S. and Ibrahim, M. H. I. and Mohd Nor, N. H. and Daud, Y. (2011) Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact. Scientific Research and Essays, 6 (21). pp. 4532-4538. ISSN 1992-2248

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Irwan Ibrahim, Mohd Halim and Murtadhahadi, Murtadhahadi (2009) Prestasi penyahikatan pelarut dengan menggunakan kaedah reka bentuk eksperimen. Sains Malaysiana, 38 (6). pp. 883-888. ISSN 0126-6039

Jamaludin, Madina and Mohammad, Nurul Farahain and Shafie, Sharidan and Ali, Anati (2012) Unsteady mixed convection flow over a cylinder of elliptic cross section near forward stagnation point. Matematika, 28 (2). pp. 109-125. ISSN 0127-8274

Jamaludin Mohd. Taib, (2014) Applications of cubic motion curve. Applied Mechanics and Materials, 606 . pp. 293-297. ISSN 1660-9336

Jamei, Saeed and Maimun, Adi and Mansor, Shuhaimi and Priyanto, Agoes and Nor Azwadi, Nor Azwadi and Tofa, M. Mobassher (2014) Aerodynamic behavior of a compound wing configuration in ground effect. Jurnal Teknologi, 66 (2). pp. 21-27. ISSN 2180–3722

Jamei S., (2012) Aerodynamic characteristics of rectangular-wing with reverse taper wing and anhedral angle in ground effect. International Review of Mechanical Engineering, 6 (7). pp. 1521-1528. ISSN 1970-8734

Jaswar, (2014) Computational fluid dynamic using parallel loop of multi-cores processor. Applied Mechanics and Materials, 493 . pp. 80-85. ISSN 1660-9336

Jaswar, (2014) Contribution of human factors to shipping safety. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 113-119. ISSN 0127-9696

Jaswar, (2014) Ice resistance performance analysis of double acting tanker in astern condition. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 73-78. ISSN 0127-9696

Jaswar, (2014) Local buckling in end expansion of subsea pipelines. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 79-83. ISSN 0127-9696

Jaswar, (2014) Marine education and research development in Malaysia. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 91-95. ISSN 0127-9696

Jaswar, (2014) Marine navigation collision preventing system. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 97-100. ISSN 0127-9696

Jaswar, (2014) Offshore structure response due to ship collision on jacket legs. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 29-37. ISSN 0127-9696

Jaswar, (2014) Parameters study of deep water subsea pipeline selection. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 115-119. ISSN 0127-9696

Jaswar, (2014) Prediction of CO2 emitted by marine transport in Batam-Singapore channel using AIS. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 121-126. ISSN 0127-9696

Jaswar, (2014) Prediction of semi-submersible's motion response by using diffraction potential theory and heave viscous damping correction. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 127-133. ISSN 0127-9696

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Selamat, Ali and Priyanto, Agoes and Zamani, Zamani and Pauzi, Pauzi and Djuansjah, J. R. P. (2012) Integrated ship maneuverability simulation tool for very large crude oil carrier. International Journal of Digital Content Technology and its Applications, 6 (13). pp. 542-548. ISSN 1975-9339

Javan, Saeed and Ahmadi, Pouria and Mansoubi, Hadi and Mohd. Jaafar, Mohammad Nazri (2015) Exergoeconomic based optimization of a gas fired steam power plant using genetic algorithm. Heat Transfer - Asian Research, 44 (6). pp. 533-551. ISSN 1099-2871

Jawaid, A. and Koksal, S. and Sharif, Safian (2001) Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy. Journal of materials processing technology, 116 (1). pp. 2-9.

Jaya, (2012) Application of fuzzy rule-based model to predict tialn coatings roughness. Applied Mechanics And Materials, 110-11 . ISSN 1660-9336

Jayah, Nurul Azzyaty and Yahaya, Hafizal and Mahmood, Mohamad Rusop and Terasako, Tomoaki and Yasui, Kanji and Hashim, Abdul Manaf (2015) High electron mobility and low carrier concentration of hydrothermally grown ZnO thin films on seeded alpha-plane sapphire at low temperature. Nanoscale Research Letters, 7 (2). ISSN 1556-276X

Jayaprakash, V. and Ng, Gheok Kuan (1998) Optimisation studies on inclined web wheel using finite elements. Jurnal Mekanikal, 1 (5). pp. 61-77. ISSN 0127-3396

Jeng Shiun Lim, (2012) A review on utilisation of biomass from rice industry as a source of renewable energy. Renewable And Sustainable Energy Reviews, 16 (5). pp. 3084-3094. ISSN 1364-0321

Johari, Anwar and Hashim, H. and Rozainee, M. (2009) Geometrical design of stand pipe air distributors for the combustion of municipal solid waste in a fluidised bed. Jurnal Teknologi, 50 (F). pp. 79-88. ISSN 2180-3722

Joshani M., (2012) Damage mechanics model for fracture process of steel-concrete composite slabs. Applied Mechanics And Materials, 165 . pp. 339-345.

Joy Rizki Pangestu Djuansjah, (2014) Angiogenesis in tissue engineering: from concept to the vascularization of scaffold construct. 2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2014), 58 . ISSN 1757-8981

Joy Rizki Pangestu Djuansjah, (2014) Linear elastic analysis of bovine cortical bone under compression loading. Advanced Materials Research, 845 . pp. 324-329. ISSN 1022-6680

Juang, Li Hong and Wu, Ming-Ni (2011) Psoriasis image identification using k-means clustering with morphological processing. Measurement: Journal of the International Measurement Confederation, 44 (5). pp. 895-905. ISSN 0263-2241

Jusoh, Iberahin (1999) Offshore pipeline risk and consequence assessment. Jurnal Mekanikal, 1 (7). pp. 56-71. ISSN 0127-3396

Jusoh, Iberahin (1998) Onshore pipeline risk and consequence assessment. Jurnal Mekanikal, 1 (5). pp. 1-17. ISSN 0127-3396

Jusoh, Iberahin (1997) Stress utilisation of jacket structure under environmental loading. Jurnal Mekanikal, 1 (3). pp. 36-49. ISSN 0127-3396

Jusoh, Iberahin and Wolfram, Julian (1996) Effects of marine growth and hydrodynamic loading on offshore structures. Jurnal Mekanikal, 1 (1). pp. 77-96. ISSN 0127-3396

K., David W. Yang and A. Bakr, Yousif and Mohd. Ghazali, Normah (2013) Experimental investigations on the effects of coiling and bends on the sound energy losses through a resonator tube. Procedia Engineering, 56 . pp. 842-848. ISSN 1877-7058

K. , Hudha and H. , Jamaluddin and P. M. , Samin and R. A. , Rahman (2005) Non-parametric linearised data driven modelling and force tracking control of a magnetorheological damper. International Journal of Vehicle Autonomous Systems , 3 (2, 3, 4). pp. 230-252.

K. , Hudha and Jamaluddin, H. and Samin, P. M. and Rahman, R. A. (2005) Effects of control techniques and damper constraint on the performance of a semi-active magnetorheological damper. International Journal of Vehicle Autonomous Systems, 3 (2 - 4). pp. 230-252. ISSN 1471-0226

Kamely M.A., (2011) The impact of cutting tool materials on cutting force. World Academy of Science, Engineering and Technology, 51 . pp. 903-906. ISSN 2010-376X

Kamitani, Shunpei and Nakanishi, Kenji and Matsushita, Takafumi and Samion, Syahrullail (2012) Measurement of coefficient of friction under bulk plastic deformation by using plane strain extrusion apparatus with plane plate tool and raper die. Tribology online, 7 (4). pp. 249-257. ISSN 1881-2198

Kamsah, Nazri and Abdul Kadir, Mohammed Rafiq (2009) The effect of bone properties due to skeletal diseases on stability of cementless hip stems. American Journal of Applied Sciences, 6 (12). pp. 1988-1994. ISSN 1546-9239

Kang, H. S. and Jalil, M. K. A. and Musa, M. (2004) A PC-based driving simulator using virtual reality technology. Proceedings VRCAI 2004 - ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Applications in Industry . pp. 273-277.

Kareem, Zaid Sattar and Abdullah, Shahrir and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in three-start spirally corrugated tube: experimental and numerical study. Chemical Engineering Science, 134 . pp. 746-757. ISSN 0009-2509

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in two-start spirally corrugated tube. Alexandria Engineering Journal, 54 (3). pp. 415-422. ISSN 1110-0168

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and AbdulWahid, Ammar Fakhir (2015) Heat transfer enhancement comparisons in different tube shapes. International Review on Modelling and Simulations, 8 (2). pp. 232-238. ISSN 1974-9821

Karimian, Majid and Ourdjini, Ali and Idris, Mohd. Hasbullah and Jafari, Hassan (2012) Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu Alloy casting. Transactions of Nonferrous Metals Society of China (English Edition), 22 (9). pp. 2092-2097. ISSN 1003-6326

Kassem, H. I. and Saqr, K. M. and Aly, H. S. and Mohd. Sies, Mohsin and Abd Wahid, Mazlan (2011) Implementation of the eddy dissipation model of turbulent non-premixed combustion in OpenFOAM. International Communications in Heat and Mass Transfer, 38 (3). pp. 363-367. ISSN 0735-1933

Keshavarz, Meysam and Ahmad, Norhayati (2013) Characterization and modification of mesoporous silica nanoparticles prepared by sol-gel. Journal of Nanoparticles, 2013 . pp. 1-4. ISSN 2180-3722

Khairuddin, Uswah and Yusof, Rubiyah and Khalid, Marzuki and Cordova, F. (2011) Optimized feature selection for improved tropical wood species recognition system. ICIC Express Letters, Part B: Applications, 2 (2). pp. 441-446. ISSN 2185-2766

Khalajabadi, Shahrouz Zamani and Abdul Kadir, Mohammed Rafiq and Izman, Sudin and Mohd. Yusop, Mohd. Zamri (2015) Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg/HA/TiO2/MgO bionanocomposites. Applied Surface Science, 324 . pp. 380-392. ISSN 0169-4332

Khalajmasoumi M., (2012) Explicit dynamic simulation of high density polyethylene beam under flexural loading condition. Applied Mechanics and Materials, 229-23 . pp. 2150-2154. ISSN 1660-9336

Khalajmasoumi M., (2012) Finite element analysis of curvature precast polymer panel for temporary support of tunnels. Applied Mechanics and Materials, 229-23 . pp. 771-777. ISSN 1660-9336

Khalajmasoumi M., (2012) Hyperelastic analysis of high density polyethylene under monotonic compressive load. Applied Mechanics and Materials, 229-23 . pp. 309-313. ISSN 1660-9336

Khaleghi, Mostafa and Ehsan, Seyed and Wahid, Mazlan A. (2015) Experimental and numerical investigations of biogas vortex combustion. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (6). pp. 662-676. ISSN 0957-6509

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2015) Investigations of asymmetric non-premixed meso-scale vortex combustion. Applied Thermal Engineering, 81 . pp. 140-153. ISSN 1359-4311

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Wahid, Mazlan A. (2015) Vortex combustion and heat transfer in meso-scale with thermal recuperation. International Communications in Heat and Mass Transfer, 66 . pp. 250-258. ISSN 0735-1933

Khamis Mansour, M. and Musa, M. N. and Wan Hassan, M. N. (2007) Thermal and economical optimization for a finned-tube, air-cooled condenser design of a roof-top bus air-conditioning system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (11). pp. 1363-1375. ISSN 0954-4062 (Print), 2041-2983 (Online)

Khamis Mansour, M. and Musa, Md. N. and Hassan, M. N. W. and Abdullah, H. and Saqr, K. M. (2007) Development of a novel control strategy for a multiple-circuit roof-top bus air-conditioning system in hot humid countries. International Journal of Mechanical and Materials Engineering, 2 . pp. 200-211. ISSN 1823-0334

Kherbeet, A. Sh. and Mohammed, Hussein A. and Salman, B. H. (2012) The effect of nanofluids flow on mixed convection heat transfer over microscale backward-facing step. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5870-5881. ISSN 0017-9310

Kianpour E., (2012) Thermodynamic analysis of flow field at the end of combustor. Applied Mechanics and Materials, 225 . pp. 261-266. ISSN 1660-9336

King Jye, Wong and B. F., Yousif and K. O., Low (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Koh, Kho King and Yaakob, O. B. and E., Azreen and K., Nurhaslinda (2015) The study of ducted propeller in propulsion performance of a Malaysia fishing boat. Jurnal Teknologi, 74 (5). pp. 39-43. ISSN 0127-9696

Koh, Khoking and H. M. Ibrahim, Mohamad Izhan and Kader, A. S. A. and Priyanto, Agoes and Rahimuddin, Rahimuddin and Arib, M. N. and Zan, U. I. and Lok, K. B. and Wira, Jazair Yahya and Mohd. Noor, Alias and Abdul Pauzi, Mohamad Pauzi and Abdul Malik, Adi Maimun (2015) Super yatch design study for Malaysian sea (Langkawi Island). Jurnal Teknologi, 74 (5). pp. 33-37. ISSN 0127-9696

Koh Kho King, (2014) Analysis of an asymmetrical bridle towline model to stabilise towing performance of a towed ship. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 151-156. ISSN 0127-9696

Kok, F. S. and Muhamad, Ida Idayu and Lee, Chew Tin and Razali, Firdausi and Pa’e, N. and Salleh, Shaharuddin (2012) Effects of pH and temperature on the growth and ß-glucosidase activity of lactobacillus rhamnosus NRRL 442 in anaerobic fermentation. International Review of Chemical Engineering, 4 (3). pp. 293-299. ISSN 2035-1755

Kolivand H., (2011) Real-time volume shadow using stencil buffer. Communications in Computer and Information Science, 180 (2). pp. 680-687. ISSN 1865-0929

Koloor S.S.R., (2012) Effect of strain rate upsetting process on mechanical behaviour of epoxy polymer. Applied Mechanics and Materials, 229-23 . pp. 303-308. ISSN 1660-9336

Koto Jaswar, (2014) Analysis of vortex-induced vibration of riser using Spalart-Almaras model. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 9-15. ISSN 0127-9696

Koto Jaswar, (2014) Estimation of electrical-wave power in Merang shore, Terengganu, Malaysia. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 9-14. ISSN 0127-9696

Koto Jaswar, (2014) Feasibility study of wing-in-ground for marine rescue operation. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 53-57. ISSN 0012-79696

Koto Jaswar, (2014) Fracture of scantling support structure of gas processing module on FPSO. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 53-59. ISSN 0127-9696

Koto Jaswar, (2014) Gap distance analysis of floating structures in tandem arrangement. Developments in Maritime Transportation and Exploitation of Sea Resources, Vol 1 . pp. 255-263.

Krishnan, Subramaniam and Ahn, Sang-Hee and Lee, Choong-Won (2010) Design and development of a hydrogen-peroxide rocket-engine facility. Jurnal Mekanikal : An International Journal (30). pp. 24-36. ISSN 0127-3396

Kuah, C. T. and Wong, Kuan Yew (2011) Knowledge management performance measurement: A review. African Journal of Business Management, 15 (5). pp. 6021-6027. ISSN 1993-8233

Kuan Yew, Wong and Komarudin, Komarudin (2010) Solving facility layout problems using flexible bay structure representation and Ant System algorithm. Expert Systems with Applications, 37 (7). 5523 - 5527. ISSN 0957-4174

Kueh A.B.H., (2012) Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets. International Journal of Mechanical Sciences . ISSN 0020-7403

Kumar Mandal, Nirmala and Abd. Rahman, Roslan and Leong, Mohd Salman (2004) Experimental study on loss factor for corrugated plates by bandwidth method. Ocean Engineering, 31 (10). pp. 1313-1323. ISSN 0029-8018

Kurdi, (2012) Finite element analysis of corroded truck chassis using sub modeling technique. Applied Mechanics And Materials, 110-11 . pp. 2411-2415. ISSN 1660-9336

Kurnianto R., (2011) Effect of no filler mixture on the visual aspect of treeing degradation in LDPE based composite. Gaodianya Jishu/High Voltage Engineering, 37 (11). pp. 2739-2745. ISSN 1003-6520

Kwek, L. C. and Loo, C. K. and Wong, E. K. and Rao, M. V. C. and Mailah, M. (2002) Active Force Control of a 5-link biped robot. IEEE Region 10 Annual International Conference, Proceedings/TENCON, 3 . pp. 1562-1565.

Lad, N. and Aroussi, A. and Muhamad Said, Mohd. Farid (2011) Droplet size measurement for liquid spray using digital image analysis technique. Journal of Applied Sciences, 11 (11). pp. 1966-1972. ISSN 1812-5654

Lai, J.C. and Ani, F.N. and Hassan, A. (2008) Water absorption of lignocellulosic phenolic composites. Polymers and Polymer Composites , 16 (6). pp. 379-388. ISSN 09673911

Lazim A.R.M., (2012) Effects of pad surface topography on disc brake squeal. Applied Mechanics And Materials, 165 . pp. 58-62.

Lee, (2012) Effect of acid treatment on silica-titania aerogel as oxidative-acidic bifunctional catalyst. Applied Mechanics And Materials, 110-11 . pp. 457-464. ISSN 1660-9336

Lee, Muhammad Hisyam and Efendi, Riswan and Ismail, Zuhaimy (2009) The effect of absorber packing height on the performance of a hybrid liquid desiccant system. Matematika, 25 (1). pp. 67-78. ISSN 0127-8274

Lee, Cheng Sheng and Wong, Kuan Yew (2015) Knowledge management performance measurement in micro-, small-, and medium-sized enterprises: an exploratory study. Business Information Review, 32 (4). pp. 204-211. ISSN 0266-3821

Lee, Ing Yi and Mohd. Yusof, Sha'ri (2007) Product quality improvement through Poka Yoke technique. Jurnal Mekanikal (23). pp. 74-82. ISSN 0127-3396

Leong, Mohd. Salman and Lim, Meng Hee and Guai, Yeu Kae (2012) Turbine generator synchronization - two case studies. Sound and Vibration, 46 (5). pp. 8-11. ISSN 1541-0161

Li, Hong Juang (2010) Finite element modelling for a piezoelectric ultrasonic system. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1387-1397. ISSN 0263-2241

Li, Hong Juang (2011) Two wheeled piezoelectric system. Intelligent Automation and Soft Computing, 17 (3). pp. 333-341. ISSN 1079-8587

Li, Hong Juang (2010) X-ray chest image reconstruction by Radon transform simulation with fan-beam geometry. Measurement, 43 (3). 447 - 453. ISSN 0263-2241

Li, Hong Juang and Ming, Ni Wu (2010) MRI brain lesion image detection based on color-converted K-means clustering segmentation. Measurement, 43 (7). 941 - 949. ISSN 0263-2241

Li, Hong Juang and Wu, Ming Ni (2010) Image noise reduction using Wiener filtering with pseudo-inverse. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1649-1655. ISSN 0263-2241

Liew, Kimfa and Mohd. Ghazali, Normah (2015) Simulation of flow and temperature development in a thermoacoustic resonator. International Journal of Technology, 6 (4). pp. 573-583. ISSN 2086-9614

Lim, Boon Han and Mailah, Musa (2005) Intelligent biometric signature verification system incorporating neural network. Jurnal Mekanikal (20). pp. 22-41. ISSN 0127-3396

Lim Meng Hee, (2013) Detection of early faults in rotating machinery based on wavelet analysis. Advances In Mechanical Engineering, 2013 . ISSN 1687-8132

Loghmanian, Sayed Mohammad Reza and Jamaluddin, Hishamuddin and Ahmad, Robiah and Yusof, Rubiyah and Khalid, Marzuki (2012) Structure optimization of neural network for dynamic system modeling using multi-objective genetic algorithm. Neural Computing & Applications, 21 (6). pp. 1281-1295. ISSN 0941-0643 (Print); 1433-3058 (Electronic)

Low, K. O. and Wong, King Jye (2011) Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions. Tribology International, 44 (2). pp. 144-153. ISSN 0301-679X

M. A., Kamely and M. Y., Noordin and V. C., Venkatesh (2007) The Effect of Multiple Pass Cutting on Surface Integrity when Hard Turning of AISI D2 Cold Work Tool Steel. International Journal of Precision Technology, 1 (1). pp. 97-105. ISSN 1755-2060

M. H. Hasan, (2012) A review on energy scenario and sustainable energy in Indonesia. Renewable And Sustainable Energy Reviews, 16 (4). pp. 2316-2328. ISSN 1364-0321

M. K., Shibinlal and Abu, Aminudin (2012) An efficient method for the calculation of eigenvector design sensitivities. S & T Review : An International Journal of Science and Technology, 1 (1). pp. 82-88. ISSN 2231-5160

M. Nor, Fethma and Kurniawan, Denni and Young, Kwon Seo and Jung, Keug Park and Ho, Yong Lee and Joong, Yeon Lim (2012) Polycaprolactone-starch blends with corn-based coupling agent: physical properties and in vitro analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (9). pp. 693-698. ISSN 0954-4119 (Print); 2041-3033 (Electronic)

M. S., Muhamad Zameri and A., Feri and Z., Norhayati and B. Jane, Gordon (2010) Strategic guidance model for product development in relationship with recycling aspects for automative products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063

M. S., Muhamad Zameri and M. S., Awaluddin (2010) Software for end-of-life disassembly analysis. Journal of Sustainable Design, 1 (3). 257 - 277. ISSN 1743-8284

M. Saqr, Khalid and Musa, Md. Nor (2007) State of the art of thermoelectric generators for waste heat recovery applications. Jurnal Teknos-2k, 7 (2). pp. 1-10. ISSN 1411 - 4151

M. Saqr, Khalid and S. Aly, Hossam and A. Wahid, Mazlan and M. Sies, Mohsin (2009) Numerical simulation of confined vortex flow using a modified k-£ turbulence model. CFD Letters, 1 (2). pp. 87-94. ISSN 2180-1363

M. Yusof, Sha'ri and Aspinwall, Elaine (2001) Case Studies on The Implementation of TQM in The UK Automotive SMEs. International Journal of Quality & Reliability Management, 18 (7). pp. 722-744. ISSN 0265-671X

M. Yusop, Z. and Md. Zain, M. Z. and Hussein, Mohamed and As’arry, A. and Musa, A. R. and Yaacob, Mohd. Shafiek and Ammoo, Mohd. Shariff (2013) Implementation of evolutionary optimization techniques in tuning PID parameters for tremor patient active assistive writing device. International Journal Of Systems Applications, Engineering & Development, 7 (4). pp. 183-190. ISSN 2074-1308

M. Yusuf, Md. Afendi (1997) Experimental study of paraffin wax potential as a physical modelling material for local environment. Jurnal Mekanikal, 2 (4). pp. 64-83. ISSN 0127-3396

M. Yusuf, Md. Afendi (2007) The effect of micro-bubbles elimination prior resin infusion process. Jurnal Mekanikal (24). pp. 32-39. ISSN 0127-3396

M.Y, Nordin and V. C., Venkatesh and S, Sharif and S, Elting and A, Abdullah (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

M.Y. , Noordin and Kurniawan, D. and Sharif, S. (2007) Hard Turning of Stainless Steel using Wiper Coated Carbide Tool. International Journal of Precision Technology, 1 (1). pp. 75-84. ISSN 1755-2060

Maarof, Mohd. Rashidi and Idris, Mohd. Hasbullah (2012) Study on conversion of higher sulfur pig iron to ductile iron using in-mold treatment technique. International Review of Mechanical Engineering, 6 (4). pp. 896-900. ISSN 1970-8734

Magaji N., (2011) Power system damping using GAbased fuzzy controlled TCSC device. Scientific Research and Essays, 6 (27). pp. 5671-5684. ISSN 1992-2248

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Experimental and numerical investigation of combined convection heat transfer and fluid flow around circular cylinder through rectangular and trapezoidal open-cell aluminum foams. Chemical Engineering Communications, 202 (5). pp. 674-693. ISSN 0098-6445

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Review of convection heat transfer and fluid flow in porous media with nanofluid. Renewable and Sustainable Energy Reviews, 41 . pp. 715-734. ISSN 1364-0321

Mahmood, Salwa and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin (2015) Graphical user interface for assessing sustainability by using fuzzy logic: a case study on hollow fiber membrane module. Jurnal Teknologi, 76 (1). pp. 207-220. ISSN 2180-3722

Mailah, M. and As'arry, A and Hussein, M and Zain, M. Z Md and Abdullah, M. Y H and Ahmad, R (2007) Development of hand-arm model rig for tremor excitation. International Journal of Simulation Modelling, 6 . pp. 25-36. ISSN 1726-4529

Mailah, Musa (1999) Design and development of a multi-gripper for use in an automated robotic assembly system. Jurnal Mekanikal (7). ISSN 0127-3396

Mailah, Musa (2000) Intelligent active force control of a rigid robot arm using embedded iterative learning algorithm. Jurnal Mekanikal, 2 (10). pp. 16-45. ISSN 0127-3396

Mailah, Musa and Hewit, J. R. and Meeran, Sheik (1996) Active force control applied to a rigid robot arm. Jurnal Mekanikal, 2 (2). pp. 52-68. ISSN 0127-3396

Mailah, Musa and Jonathan Chong, Wun Shiung (2002) Control of a robot arm using iterative learning algorithm with a stopping criterion. Jurnal Teknologi A (37A). pp. 55-72. ISSN 0127-9696

Mailah, Musa and Lim, Boon Han (2008) Biometric signature verification using pen position, time, velocity and pressure parameters. Jurnal Teknologi A (48A). pp. 35-54. ISSN 0127-9696

Mailah, Musa and Low, Hook Jong (2003) Intelligent active force control of a three-link manipulator using fuzzy logic. Jurnal Mekanikal (16). pp. 57-78. ISSN 0127-3396

Mailah, Musa and Pitowarno, Endra and Jamaluddin, Hishamuddin (2005) Robust motion control for mobile manipulator using resolved acceleration and proportional-integral active force control. International Journal of Advanced Robotic System, 2 (2). pp. 125-134. ISSN 1729-8806

Mailah, Musa and Poh, Yang Liang (2005) Development of a software for simulating active force control schemes of a two–link planar manipulator. Jurnal Teknologi A, 43 . pp. 49-74. ISSN 0127-9696

Mailah, M. and Jahanabadi, H. and Zain, M. Z. M. and Priyandoko, G. (2009) Modelling and control of a human-like arm incorporating muscle models. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (7). pp. 1569-1577. ISSN 0954-4062

Mailah, Musa and Abu Bakar, Abdul Rahim and Hashemi-Dehkordi, S. M. (2010) Intelligent active force control with piezoelectric actuators to reduce friction induced vibration due to negative damping. International Review of Electrical Engineering , 4 (6). 1294 - 1305. ISSN 1827-6660

Mailah, Musa and Abu Bakar, Abdul Rahim and Hashemi-Dehkordi, S. M. (2010) Suppressing friction-induced vibration due to negative damping and mode coupling effects using active force control. Australian Journal of Basic and Applied Sciences, 4 (8). 3917 - 3933.

Mailah, Musa and Ali, M.A.H. and Tang, H.H. and Rahim, M.A.A. (2014) Autonomous mobile robot platform for on-the-road navigation. Advanced Materials Research, 845 . pp. 750-754. ISSN 1022-6680

Mailah, Musa and Mat Darus, Intan Zaurah and A. R., Tavakolpour and O., Tokhi (2010) Self-learning active vibration control of a flexible plate structure with piezoelectric actuator. Simulation Modelling Practice and Theory, 18 (5). 516 - 532. ISSN 1569-190X

Mailah, Musa and Min Yee, Wong and Jamaluddin, Hishamuddin (2002) Intelligent active force control of a robotic arm using genetic algorithm. Jurnal Mekanikal (13). ISSN 0127-3396

Mailah, Musa and Ong, Miaw Yong (2001) Intelligent adaptive active force control of a robotic arm with embedded iterative learning algorithms. Jurnal Teknologi A (35A). pp. 85-98. ISSN 0127-9696

Mailah, Musa and Varatharajoo, Renuganth and Choo, Tech Wooi (2011) Two degree-of-freedom spacecraft attitude controller. Advances in Space Research, 47 (4). pp. 685-689. ISSN 0273-1177

Mailah, M. and Priyandoko, G. (2007) Simulation of a suspension system with adaptive fuzzy active force control. International Journal of Simulation Modelling , 6 (1). pp. 25-36. ISSN 1726-4529

Maimun, Adi and Yaakob, Omar and Md. Ahm, Kamal and Ng, Chee Wei (2006) Seakeeping Analysis of a Fishing Vessel Operating in Malaysian Water. Jurnal Mekanikal (22). pp. 103-114. ISSN 0127-3396

Maimun, A. and Priyanto, A. and Wong, K. S. and Pauzi, M. and Rafiqul, M. (2009) Effects of side keels on patrol vessel safety in astern waves. Ocean Engineering, 36 (3-4). pp. 277-284. ISSN 00298018

Maimun, Adi and Priyanto, Agoes and Muhammad, A. H. and Scully, C. C. and Awal, Z. I. (2011) Manoeuvring prediction of pusher barge in deep and shallow water. Ocean Engineering, 38 (011-01). pp. 1291-1299. ISSN 0029-8018

Maimun, Adi and Setyawan, Donny and Islam, M. Rafiqul and Priyanto, Agoes and Jaswar, Jaswar (2010) Safety of a high speed passenger ferry in damaged condition. Journal of Applied Sciences, 11 . pp. 219-235. ISSN 1812-5654

Mainal, Mohd. Ramzan and Jaafar, Ghazali (1997) On the strength and vibration analysis of a 8000 dwt container ship propeller. Jurnal Mekanikal, 2 (4). pp. 29-51. ISSN 0127-3396

Mainal, Mohd. Ramzan and Kamil, Mohd. Salim (1996) Estimation of ship manoeuvring characteristics in the conceptual design stage. Jurnal Mekanikal, 1 (1). pp. 44-60. ISSN 0127-3396

Mainal, Mohd. Ramzan (1993) Application of an expert system shell in the preliminary design of offshore supply vessels. Jurnal Teknologi, 21 . pp. 1-19. ISSN 2180-3722

Mamat, Aman M. I. and Martines-Botas, Ricardo and Rajoo, S. and Romagnoli, Alessandro and Petrovic, Simon (2015) Waste heat recovery using a novel high performance low pressure turbine for electric turbocompounding in downsized gasoline engines: experimental and computational analysis. Energy, 90 . pp. 218-234. ISSN 0360-5442

Mandal, Nirmal Kumar and Abd Rahman, Roslan and Leong, M.Salman (2005) Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity. Journal of Sound and Vibration, 285 . pp. 669-695.

Mansoorzadeh, Shiva and Mohd. Yusof, Sha'ri and Mansoorzadeh, Shahriar and Zeynal, Hossein (2014) A comprehensive and practical framework for reliable scheduling in project management. Advanced Materials Research, 903 . pp. 378-383. ISSN 1022-6680

Mansoorzadeh, Shiva and Mohd. Yusof, Sha'ri and Zeynal, Hossein and Mansoorzadeh, Shahriar (2012) A risk-based project schedule estimation method to improve project reliability. Advanced Science Letters, 13 (1). pp. 813-816. ISSN 1936-6612

Mansor, Shuhaimi and Ishak, Iskandar Shah and Ong, Meng Wei and Fahrurazi, Istas (2000) Development of a dynamic wind tunnel rig for aircraft pure pitching motion. Jurnal Mekanikal, 2 (10). pp. 46-57. ISSN 0127-3396

Mansor, Shuhaimi and Perumal, Kannan (2008) A synthesis of an aircraft approach, landing & overrun. Jurnal Mekanikal (26). pp. 141-150. ISSN 0127-3396

Mansor, Shuhaimi (2002) Analisis kestabilan statik membujur pesawat terbang ringan. Jurnal Mekanikal (13). pp. 26-45. ISSN 0127-3396

Mansour, M. Khamis and Musa, Md. Nor and Wan Hassan, Mat Nawi (2008) Thermoeconomic optimization for a finned-tube evaporator configuration of a roof-top bus air-conditioning system. International Journal of Energy Research, 4 (2). pp. 1-16. ISSN 1099-114X

Mansour, M. Khamis and Musa, Md. Nor and Hassan, M. N. W. and Abdullah, H. (2007) Theoretical and experimental simulation of roof-top bus multiple-circuit air-conditioning system performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , 221 (12). pp. 1665-1677. ISSN 0954-4062

Mansour, M. Khamis and Musa, Md. Nor and Wan Hassan, Mat Nawi and Saqr, Khalid M. (2008) Development of novel control strategy for multiple circuit, roof top bus air conditioning system in hot humid countries. Energy conversion and management, 49 (6). pp. 1455-1468. ISSN 0196-8904 (In Press)

Marwah, Omar Mohd. Faizan and Sharif, Safian and Ibrahim, Mustaffa (2012) Direct fabrication of IC sacrificial patterns via rapid prototyping approaches. International Journal of Automation Technology, 6 (5). pp. 570-575. ISSN 1881-7629

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (3). pp. 336-355. ISSN 1450-216X

Masood, Ibrahim and Hassan, Adnan (2012) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. International Journal of Advanced Manufacturing Technology, 66 (9-12). pp. 1201-1218. ISSN 0268-3768

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Hooi, Lai Wan and Jamal, Nadia (2012) Information and communication technology issues: a case of Malaysian Primary School. ARPN Journal of Science and Technology, 2 (5). pp. 504-511. ISSN 2225-7217

Mat Ali, Mohamed Sukri and Doolan, Con J. and Wheatley, Vincent (2012) Low Reynolds number flow over a square cylinder with a detached flat plate. International Journal of Heat and Fluid Flow, 36 . pp. 133-141. ISSN 0142-727X

Mat Alit, Mohamad Isnizam and Mohd. Jaafar, Mohammad Nazri (2001) Pembangunan Pembakar Bahan Api Cecair Beremisi Rendah Di UTM. Jurnal Teknologi A (35A). pp. 71-84. ISSN 0127-9696

Mat Darus, I.Z and Tokhi, M O (2005) Soft computing-based active vibration control of a flexible structure. Engineering Applications of Artificial Intelligence, 18 (1). pp. 93-114. ISSN 0952-1976

Mat Darus, Intan Zaurah and Al-Khafaji, A. A. M. (2011) Non-parametric modelling of a rectangular flexible plate structure. Engineering Applications of Artificial Intelligence, 25 (1). pp. 94-106. ISSN 0952-1976

Mat Darus, Intan Zaurah and Lokaman, Zainul Aman (2010) Dynamic modelling of twin rotor multi system in horizontal motion. Jurnal Mekanikal (31). pp. 17-29. ISSN 0127-3396

Mat Darus, Intan Zaurah and Mailah, Musa and A. R., Tavakolpour (2009) Active vibration control of a rectangular flexible plate structure using high gain feedback regulator. International Review of Mechanical Engineering (I.R.E.M.E), 3 (5).

Mat Darus, Intan Zaurah and Mailah, Musa and Tavakolpour, Ali Reza (2010) Genetic algorithm-based identification of transfer function parameters for a rectangular flexible plate system. Engineering Application of Artificial Intelligence, 23 (8). 1388 - 1397. ISSN 0952-1976

Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Natural Frequency Analysis Of All Edges Clamped Flexible Thin Plate. International Review of Mechanical Engineering (IREME), 4 (4). 433 - 440. ISSN 1970 - 8734

Mat Darus, Intan Zaurah and Tokhi, Mohammad Osman (2004) Parametric modeling of a flexible 2D structure. Journal of Low Frequency Noise Vibration and Active Control , 23 (2). pp. 115-131. ISSN 1461-3484

Mat Deris A., (2011) Overview of support vector machine in modeling machining performances. Procedia Engineering, 24 . pp. 308-312. ISSN 1877-7058

Mat Dzahir, M. Azwarie and Hussein, Mohamed and Supriyo, Bambang and Tawi, Kamarul Baharin and Yaakob, Mohd. Shafiek and Mat Dzahir, M. Azuwan and Mohamad, Maziah (2015) Optimal tuning of a PID controller for EMDAP-CVT using particle swarm optimization. Jurnal Teknologi, 75 (11). pp. 135-141. ISSN 2180-3722

Mat Ghani, M. F. and Mohd. Taib, Jamal and Dzakaria, Afandi (2015) Feasibility study on the implementation of Cubic Motion curve for vehicle trajectory planning. Advances in Mechanical Engineering, 7 (1). ISSN 1687-8132

Mat Lazim, Ahmad Razimi and Abdul Hamid, Mohd. Kameil and Abu Bakar, Abd. Rahim (2012) Effect of pad surface topography on disc brake squeal. Applied Mechanics and Materials , 165 . pp. 58-62. ISSN 1660-9336

Mat Lazim, Tholudin and Mat, Shabudin and Huong , Yu Saint (2004) Computational Fluid Dynamic Simulation (CFD) and Experimental Study on Wing-external Store Aerodynamic Interference of subsonic Fighter Aircraf. Journal of Advanced Engineering, 44 (2). pp. 9-14. ISSN 1210-2709

Mat Rebi Abdul Rani, (2014) Developing a conceptual road safety framework to construct road safety regression outcome. Journal of Engineering and Applied Sciences, 9 (4). pp. 536-541. ISSN 1816-949X

Mat Safri, Norlaili and Murayama, Nobuki (2007) Comparison of EEG-EMG time delays calculated by phase estimates and inverse FFT. Elektrika, 9 (2). pp. 1-7. ISSN 0128-4428

Mat Saman, Muhamad Zameri and Blount, Gordon (2008) The DFEL value methodology: a tool for design-for-environment in automotive industry. Jurnal Mekanikal (27). pp. 23-41. ISSN 0127-3396

Mat Saman, Muhamad Zameri and Blount, Gordon N. (2006) End of life vehicles recovery : process descriptio, its impact and direction of research. Jurnal Mekanikal (21). pp. 40-52. ISSN 0127-3396

Mat Saman, Muhamad Zameri and Afrinaldi, Feri and Zakuan, Norhayati and Blount, Gordon and Goodyer, Jane and Jones , Ray and Jawaid, Ashraf (2010) Strategic guidance model for product development in relation with recycling aspects for automotive products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063 (Print);1913-9071 (Electronic)

Mat Saman, Muhamad Zameri and Blount, Gordon and Zakuan, Norhayati (2012) Design for end-of-life value framework for vehicle design and development process. Journal of Sustainable Development, 5 (3). pp. 95-111. ISSN 1913-9071 (Electronic); 1913-9063 (Print)

Mat Saman, Muhamad Zameri and Mahmood, S. and Jiran, N.S. and Noordin, M.Y. (2014) Determination of parameters for sustainability assessment of hollow fiber membrane module life cycle. Advanced Materials Research, 845 . pp. 724-729. ISSN 1022-6680

Mat Saman, Muhamad Zameri and Ullah, Aleem and Mahmood, Salwa (2014) Development of multi-criteria decision analysis methodology to determine product end-of-life treatment options. Advanced Materials Research, 845 . pp. 852-856. ISSN 1022-6680

Mat Tokit, E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids. International Communications in Heat and Mass Transfer, 39 (10). pp. 1595-1604. ISSN 0735-1933

Mat Yajid, Muhamad Azizi and Bagshaw, H. and Mobus, G. (2010) In situ and ex situ transmission electron microscopy investigation of Cu-Al-Cu-Ti reactive metallic multilayer coatings. Journal Of Materials Research, 25 (6). 1196 - 1203. ISSN 0022-2461

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, T. and Zamheri, A. and Rizal, S. (2015) Water treatment perfomance: application of electrospun nanofibers. Jurnal Teknologi, 77 (1). pp. 263-267. ISSN 0127-9696

Mavalizadeh, Seyedmehdi and Ochsner, Andreas and Ramandoust, Moones (2011) Numerical investigation of the overall stiffness of carbon nanotube-based composite materials. Journal of Nano Research, 13 ( ). 047-059. ISSN 1662-5250

Mazlan, Saiful Amri and Ismail, Izwan and Fathi, Mohamad S. and Rambat, Shuib (2011) An experimental investigation of magnetorheological (MR) fluids under quasi-static loadings. Key Engineering Materials, 495 . pp. 285-288. ISSN 1662-9795

Mazlan, Saiful Amri and Izwan, Zamzuri and Zamzuri, Hairi and Abdul Fatah, Abdul Yasser (2011) Compressive and tensile stresses of magnetorheological fluids in squeeze mode. International Journal Of Applied Electromagnetics And Mechanics, 36 (4). pp. 327-337. ISSN 1383-5416

Mazlan Abdul Wahid, (2014) Characteristics of biomass in flameless combustion: a review. Renewable and Sustainable Energy Reviews, 33 . pp. 363-370. ISSN 1364-0321

Mazlan Abdul Wahid, (2014) Characterization of a low NOx flameless combustion burner using natural gas. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 121-125. ISSN 0127-9696

Mazlan Abdul Wahid, (2014) Combustion characteristics of inedible vegetable oil biodiesel fuels. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 157-162. ISSN 0127-9696

Mazlan Abdul Wahid, (2014) Development of biogas combustion in combined heat and power generation. Renewable and Sustainable Energy Reviews, 40 . pp. 868-875. ISSN 1364-0321

Mazlan Abdul Wahid, (2014) Effect of nanoparticle shapes on the heat transfer enhancement in a wavy channel with different phase shifts. Journal of Molecular Liquids, 196 . pp. 32-42. ISSN 0167-7322

Mazlan Abdul Wahid, (2014) Effects of bluff body shape on the flame stability in premixed micro-combustion of hydrogen-air mixture. Applied Thermal Engineering, 67 (2). pp. 266-272. ISSN 1359-4311

Mazlan Abdul Wahid, (2014) Effects of hydrogen addition on the entropy generation of biogas conventional combustion. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 97-102. ISSN 0127-9696

Mazlan Abdul Wahid, (2014) Emission and combustion characteristics of hydrogen in vortex flame. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 47-51. ISSN 0127-9696

Mazlan Abdul Wahid, (2014) Enhancement of exergy efficiency in combustion systems using flameless mode. Energy Conversion and Management, 86 . pp. 1154-1163. ISSN 0196-8904

Mazlan Abdul Wahid, (2014) Flameless combustion role in the mitigation of NOx emission: a review. International Journal of Energy Research, 38 (7). pp. 827-846. ISSN 1099-114X

Mazlan Abdul Wahid, (2014) Heat transfer enhancement and pressure drop for fin-and-tube compact heat exchangers with wavy rectangular winglet-type vortex generators. International Communications in Heat and Mass Transfer, 54 . pp. 132-140. ISSN 0735-1933

Mazlan Abdul Wahid, (2014) Investigation of bluff-body micro-flameless combustion. Energy Conversion and Management, 88 . pp. 120-128. ISSN 0196-8904

Mazlan Abdul Wahid, (2014) Neural network modeling for main steam temperature system. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 93-97. ISSN 0127-9696

Mazlan Abdul Wahid, (2014) Numerical investigation of biogas flameless combustion. Energy Conversion and Management, 81 . pp. 41-50. ISSN 0196-8904

Md Afendi M. Yusuf, (2014) Enhancing growth and lipid production of marine microalgae for biodiesel production via the use of different LED wavelengths. Bioresource Technology, 162 . pp. 38-44. ISSN 0960-8524

Md Deros, Baba and Yusof, Sha'ri Mohd and Md Salleh, Azhari (2006) A benchmarking implementation framework for automotive manufacturing SMEs. Benchmarking: An International Journal, 13 (4). pp. 396-430. ISSN 1463-5771

Md Ridzuan M., (2012) Mathematical model of eco-driving for energy optimization for electric vehicle. Applied Mechanics And Materials, 165 . pp. 114-119.

Md. , Kawser and N. A. , Farid (2000) Thermochemical processing of rubber waste to liquid fuel. Plastics, Rubber and Composites Processing and Applications, 29 . pp. 100-104. ISSN 0959-8111

Md. Noor Rudin, Noor Fawazi and Jung, Youn Lee and Jae, Eung Oh (2012) A load-displacement prediction for a bended slotted disc using the energy method. Proceedings Of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 226 (8). pp. 2126-2137. ISSN 0954-4062

Md. Nordin, Nik Abdul Hadi and Racha, Surya Murali and Matsuura, Takeshi and Misdan, Nurasyikin and Abdullah Sani, Nur Aimie (2015) Facile modification of ZIF-8 mixed matrix membrane for CO2/CH4 separation: synthesis and preparation. RSC Advances, 5 (4). pp. 43110-43120. ISSN 2046-2069

Md. Razak, D. and Syahrullail, Samion and Sapawe, Norzahir and Yahya, Azli and Nuraliza, N. (2015) A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: improving tribology in metal-on-metal contact. Tribology Transactions, 58 (3). pp. 511-517. ISSN 1040-2004

Md. Sirat, Rozlina and Md.Tap, Masine and Mohd. Shaharoun, Awaluddin (2000) A survey report on implementation of design for assembly (DFA) in Malaysian manufacturing industries. Jurnal Mekanikal, 1 . pp. 60-75. ISSN 0127-3396

Md. Tap, Masine and Omar, Nor Miza Hazwani and Redzuan, Norizah (2014) Conceptual optimization model of inventory/distribution network with multi role nodes. Advanced Materials Research, 845 . pp. 692-695. ISSN 1022-6680

Md. Zain, M. Z. and Mailah, Musa and Priyandoko, G. (2008) Active force control with input shaping technique for a suspension system. Jurnal Mekanikal (27). pp. 91-104. ISSN 0127-3396

Md. Zain, Mohd. Zarhamdy and Tokhi, M. O. and Mailah, Musa and Mohamed, Zaharuddin (2004) Improving perfomance in single-link flexible manipulator using hybrid learning control. Jurnal Mekanikal (18). pp. 13-28. ISSN 0127-3396

Md. Zain, Mohd. Zarhamdy and As’arry, Azizan and Kazi, Suhail and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus (2010) Development of experimental-rig for human postural tremor behaviour. International Journal of Human Factors Modelling and Simulation, 1 (3). pp. 339-351. ISSN 1742-5549

Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and S., Kazi and A., As'arry (2010) Experimental implementation of smart glove incorporating piezoelectric actuator for hand tremor Control. WSEAS Transactions on Systems and Control, 5 (6). 443 - 453. ISSN 1991-8763

Meng, Hee Lim and Leong, Salman (2005) Diagnosis for loose blades in gas turbines using wavelet analysis. Journal of Engineering for Gas Turbine and Power, 127 (2). pp. 314-322. ISSN 0742-4795

Middleton, Paul M. and Tang, Howe Hing and Chan, Gregory S. H. and Bishop, Sarah and Savkin, Andrey V. and Lovell, Nigel H. (2011) Peripheral photoplethysmography variability analysis of sepsis patients. Medical & Biological Engineering & Computing, 49 (3). pp. 337-347. ISSN 0140-0118

Miguel, Antonio Ferreira and Ochsner, Andreas (2012) This Special Issue presents a set of papers presented to the special session "design generation and evolution of flow systems" of the 7-th International Conference on Diffusion in Solids and Liquids - DSL2011. International Journal of Fluid Mechanics Research, 39 (2). pp. 99-100. ISSN 1064-2277 (Print); 2152-5102 (Electronic)

Misha, Suhaimi and Darus, Amer Nordin (2007) Variational method in the design of an optimum solar water heater storage tank. Jurnal Mekanikal (23). pp. 62-73. ISSN 0127-3396

Mishuris, Gennady and Miszuris, Wiktoria and Ochsner, Andreas (2007) Finite element verification of transmission conditions for 2D heat conduction problems. Materials Science Forum, 553 . pp. 93-99.

Mishuris, Gennady and Miszuris, Wiktoria and Öchsner, Andreas (2007) Evaluation of transmission conditions for a thin heat-resistant inhomogeneous interphase in dissimilar material. Materials Science Forum, 553 (87). pp. 87-92.

Mishuris, Gennady S. and Miszuris, Wiktoria and Öchsner, Andreas (2008) Evaluation of transmission conditions for thin reactive heat-conducting interphases. Defect and Diffusion Forum, 273 . 394 -399. ISSN 1012-0386

Mishuris, Gennady and Ochsner, Andreas (2007) 2D modelling of a thin elasto-plastic interphase between two different materials: Plane strain case. Composite Structures, 80 (3). pp. 361-372. ISSN 0263-8223

Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Saidina Amin, Nor Aishah (2009) Pretreatment of empty palm fruit bunch for lignin degradation. Jurnal Teknologi, 50 (F). pp. 89-98. ISSN 2180-3722

Mohamad, Mohd. Murtadha (2008) Articulated robots motion planning using foraging ant strategy. Jurnal Teknologi Maklumat, 20 (4). pp. 163-181. ISSN 0128-3790

Mohamed Hussein, (2014) Analysis of single actuator for rehabilitation device of leg weakness. Applied Mechanics and Materials, 465-46 . pp. 1021-1025. ISSN 1660-9336

Mohamed Kamar, Haslinda and Kamsah, Nazri and Senawi, Mohd. Yusoff (2013) Computerized simulation of automotive airconditioning system: a parametric study. International Journal of Computer Science Issues, 1 (1). pp. 787-794. ISSN 1694-0784

Mohamed Kamar, Haslinda and Senawi, Mohd. Yusoff and Kamsah, Nazri (2012) Computerized simulation of automotive air-conditioning system: development of mathematical model and its validation. IJCSI - International Journal of Computer Science Issues, 9 (2). pp. 23-34. ISSN 1694-0784 (Print) ; 1694-0814 (Electronic)

Mohamed Ruslan Abdullah, (2014) Flatwise compression and flexural behavior of foam core and polymer pin-reinforced foam core composite sandwich panels. International Journal of Mechanical Sciences, 88 . pp. 138-144. ISSN 0020-7403

Mohamed Ruslan Abdullah, (2014) Flexural and tensile behaviour of kenaf fibre composite materials. Materials Research Innovations, 18 . S6184-S6186. ISSN 1432-8917

Mohamed Ruslan Abdullah, (2014) Indentation fracture behaviour of fibre metal laminates based on kenaf/epoxy. International Review of Mechanical Engineering, 8 (1). pp. 265-270. ISSN 1970-8734

Mohamed Shaharoun, Awaludin (2013) To improve machining fixture design: a case based reasoning paradigm. Journal of Basic and Applied Scientific Research, 3 (5). pp. 931-937. ISSN 2090-4304

Mohamed, Julie J. and Hutagalung, Sabar D. and Ain, M. Fadzil and Deraman, Karim and Ahmad, Zainal A. (2007) Microstructure and dielectric properties of CaCu3Ti4O12 ceramic. Material Letters, 61 (8-9). pp. 1835-1838.

Mohammad Nazri Mohd. Jaafar, (2014) Diesel performances during combustion using high swirling flow in unconfined burner. American-Eurasian Journal of Sustainable Agriculture, 8 (7 2). pp. 62-68. ISSN 1995-0748

Mohammad Nazri Mohd. Jaafar, (2014) Effect of flame on various swirler angle in combustion performance. American-Eurasian Journal of Sustainable Agriculture, 8 (7 2). pp. 57-61. ISSN 1995-0748

Mohammad Nazri Mohd. Jaafar, (2014) Energy analysis and multi-objective optimization of an internal combustion engine-based CHP system for heat recovery. Entropy, 16 (11). pp. 5633-5653. ISSN 1099-4300

Mohammad Nazri Mohd. Jaafar, (2014) Experimental study on the production of CO-NO-HC emissions in the radial swirling flow combustion system. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 45-48. ISSN 2180-3722

Mohammad Nazri Mohd. Jaafar, (2014) Modelling and optimization of combined cycle power plant based on exergoeconomic and environmental analyses. Applied Thermal Engineering, 67 (1-2). pp. 566-578. ISSN 1359-4311

Mohammad Nazri Mohd. Jaafar, (2014) Numerical analysis on the CO-NO formation production near burner throat in swirling flow combustion system. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 71-77. ISSN 2180-3722

Mohammad Nazri Mohd. Jaafar, (2014) Optimization of a novel carbon dioxide cogeneration system using artificial neural network and multi-objective genetic algorithm. Applied Thermal Engineering, 64 (1-2). pp. 293-306. ISSN 1359-4311

Mohammad Nazri Mohd. Jaafar, (2014) A review of biomass gasification technology to produce syngas. American-Eurasian Journal of Sustainable Agriculture, 8 (7 2). pp. 69-74. ISSN 1995-0748

Mohammad Nazri Mohd. Jaafar, (2014) A study of biodiesel production from crude jatropha oil (CJO) with high level of free fatty acids. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 65-72. ISSN 0127-9696

Mohammad zri Mohd Jaafar, (2011) Aerodynamic study of combustor using axial swirler. International Review of Mechanical Engineering (IREME), 5 (1). pp. 92-99. ISSN 1970-8734

Mohammad zri Mohd Jaafar, (2011) Combustor aerodynamic using radial swirler. International Journal of Physical Sciences, 6 (13). pp. 3091-3098. ISSN 1992-1950

Mohammadi, Maryam and Md. Tap, Masine (2012) A mixed integer programming model formulation for solving the lot-sizing problem. Internation Journal of Computer Science Issues, 9 (2). pp. 1694-1703. ISSN 1694-0784

Mohammadreza, Yadollahi and Mohammad Zin, Rosli and Mohammadreza, Vafaei (2012) A model for seismic vulnerability score assignment of road infrastructure using linear regression technique. Applied Mechanics And Materials, 147 . pp. 266-269. ISSN 1660-9336

Mohammed, Hussein A. and Al-Aswadi, A. A. and Yusoff, M. Z. and Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643 (Print); 1531-8699 (Electronic)

Mohammed, Hussein A. and Narrein, K. (2012) Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger. International Communications in Heat and Mass Transfer, 39 (9). pp. 1375-1383. ISSN 0735-1933

Mohammed Adham, Ahmed and Mohd. Ghazali, Normah and Ahmad, Robiah (2013) Cooling of microchannel heat sinks with gaseous coolants. Procedia Engineering, 56 (n/a). pp. 338-343. ISSN 1877-7058

Mohammed Al-Mola, (2013) Fuzzy-based PID with iterative learning active force controller for an anti-lock brake system. International Journal of Simulation, Systems, Science and Technology, IJSSST, 13 (3A). pp. 35-41. ISSN 1473-8031

Mohammed Khdher, AbdolBaqi and Che Sidik, Nor Azwadi and Mamat, Rizalman and Wan Hamzah, Wan Azmi (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69 . pp. 34-40. ISSN 0735-1933

Mohd Adn M.R.H., (2011) Consideration of fuzzy components for prediction of machining performance: a review. Procedia Engineering, 24 . pp. 754-758. ISSN 1877-7058

Mohd Fua'ad Rahmat, (2011) Temperature control of a continuous stirred tank reactor by means of two different intelligent strategies. International Journal on Smart Sensing and Intelligent Systems, 4 (2). pp. 244-267. ISSN 1178-5608

Mohd Fuaad Rahmat, (2011) Modeling and controller design of an industrial hydraulic actuator system in the presence of friction and internal leakage. International Journal of Physical Sciences, 6 (14). pp. 3502-3517. ISSN 1992-1950

Mohd Rashidi M., (2012) A study on conversion of higher sulfur pig iron to ductile iron using in-mold treatment technique. International Review Of Mechanical Engineering, 6 (4). pp. 896-900.

Mohd Yusof, Sha'ri and Aspinwall , Elaine (2003) Total quality management implementation frameworks: comparison and review. Total Quality Management, 11 (34). pp. 281-294. ISSN 0954-4127, 1360-0613

Mohd Zain, Azlan and Haron, Habibollah and Sharif, Safian (2010) Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Systems with Applications, 37 (6). pp. 4650-4659. ISSN 09574174

Mohd. Adib, Mohd Azrul Hisham and Mohd. Hasni, Nur Hazreen and Osman, Kahar and Maskon, Oteh (2012) Analysis on rigidity of mitral valve leaflet (MVL) and backflow problems during cardiac cycle. Journal of Biomimetics, Biomaterials, and Tissue Engineering, 13 (1). pp. 75-79. ISSN 1662-1018

Mohd. Amin, Mohd. For and Khoo, Kai Siang and Chai, Hui Chon (2004) Reinforcement mechanisms of rock bolt : a laboratory investigation. Jurnal Kejuruteraan Awam, 16 (1). pp. 1-12. ISSN 0128-0147

Mohd. Aris, Siti Armiza and Taib, M. N. and Lias, S. and Sulaiman, N. (2011) Feature extraction of EEG signals and classification using FCM. Proceedings - 2011 UKSim 13th International Conference on Modelling and Simulation, UKSim 2011 . pp. 54-58. ISSN 978-076954376-5 (ISBN)

Mohd. Arshad, Azmi and Othman, Ariff and Abdul Razak, Mohd. Razif and Abu Bakar, Mohamad (1993) Aliran dua fasa di bahagian mendatar telaga. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-7.

Mohd. Ayub Sulong, (2014) Compressive properties of Advanced Pore Morphology (APM) foam elements. Materials Science and Engineering A, 607 . pp. 498-504. ISSN 0921-5093

Mohd. Ayub Sulong, (2014) Compressive properties of corevo® foam under uni-axial loading based on experimental and numerical analysis. Applied Mechanics and Materials, 597 . pp. 121-126. ISSN 1660-9336

Mohd. Azmi, Mohd. Irwan and Abdul Munir, Fudhail and Che Sidik, Nor Azwadi and Goudarzi, Masoud (2011) Numerical investigation of incompressible fluid flow through porous media in a lid-driven square cavity. American Journal of Applied Sciences, 7 (10). 1341-1344. ISSN 1546-9239

Mohd. Fadzil Daud, (2014) Contextual knowledge in three dimensional computer aided design (3D CAD) modeling: a literature review and conceptual framework. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 176-181.

Mohd. Fairus Mohd. Yasin, (2014) Discrete multicomponent model for biodiesel spray combustion simulation. Fuel, 126 . pp. 44-54. ISSN 0016-2361

Mohd. Farid Muhamad Said, (2013) Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering, 7 (6). pp. 1152-1158. ISSN 1970-8734

Mohd. Ghazali, N. (2004) Thermoacoustic Heat Engine. Jurnal Teknologi A (40A). pp. 67-78. ISSN 0127-9696

Mohd. Ghazali, Normah (2002) Numerical Study Of Viscous Effects On Acoustic Waves. Jurnal Teknologi C (37A). pp. 47-54. ISSN 0127-9696

Mohd. Hasbullah Idris, (2014) An alternative approach in ceramic shell investment casting of AZ91D magnesium alloy: In situ melting technique. Journal of Materials Processing Technology, 214 (4). pp. 988-997. ISSN 0924-0136

Mohd. Hasbullah Idris, (2014) Characterisation of calcium phosphate coating on investment cast 316L stainless steel. Materials Research Innovations, 18 . pp. 886-891. ISSN 1432-8917

Mohd. Hasbullah Idris, (2014) Corrosion resistance of EPD nanohydroxyapatite coated 316L stainless steel. Surface Engineering, 30 (11). pp. 806-813. ISSN 0267-0844

Mohd. Hasbullah Idris, (2014) Effect of friction stir welding pin shape on mechanical properties of AA6061 alloy weldment. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 1309-1313. ISSN 1660-9336

Mohd. Hasbullah Idris, (2014) Effect of thickness and permeability of ceramic shell mould on in-situ melted AZ91D investment casting. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 1087-1092. ISSN 1660-9336

Mohd. Hasbullah Idris, (2014) Evaluations of antimony and strontium interaction in an Al-Si-Cu-Zn die cast alloy. Thermochimica ACTA, 584 . pp. 72-78. ISSN 0040-6031

Mohd. Hasbullah Idris, (2014) Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys. Materials & Design, 53 . pp. 283-292. ISSN 0261-3069

Mohd. Hasbullah Idris, (2014) Partially degradable friction-welded pure iron-stainless steel 316L bone pin. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 103 (1). pp. 31-38. ISSN 1552-4973

Mohd. Jaafar, Mohammad Nazri (1996) The application of fuel staging on reducing NOx emissions from gas burner. Jurnal Mekanikal (2). pp. 1-15. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri (1997) Emissions from gas burner, their impact on the environment and abatment techniques. Jurnal Mekanikal, 1 (3). pp. 50-70. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Andrews, G. E. and MkPadi, M. C. (2000) NOx emission reduction from gas burner system applying water cooling technique. Jurnal Mekanikal, 2 (10). pp. 58-72. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamad Shukri (2002) The influence of variable vane angle air swirler on reducing emissions from combustion process. Jurnal Mekanikal (14). pp. 1-9. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamed Shukri (2005) Kajian perbandingan ram lengkung dan ram rata bagi pemusar udara aliran jejarian dalam mengurangkan emisi. The Journal of the Institution of Engineers, Malaysia, 66 (4). pp. 57-63. ISSN 0126-513X

Mohd. Jaafar, Mohammad Nazri and Sulian, Mohd Sharul (2005) Keberkesanan pembakaran udara berperingkat dalam mengurangkan emisi dari pembakar berbahanapi gas. The Journal of The Institution of Engineers, Malaysia, 66 (3). pp. 33-37. ISSN 0126-513X

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam (2004) Development of solid rocket propulsion system at UTM. Jurnal Mekanikal, 18 . pp. 111-121. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri (1997) Development of radial aerodynamic swirlers. Jurnal Mekanikal, 2 (4). pp. 13-28. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri (2013) Pembangunan bahan dorong ammonium nitrat untuk roket pepejal. Perintis E-Journal , 3 (2). pp. 31-41. ISSN 2232-0725

Mohd. Jaafar, Mohammad Nazri and Andrews, G.E. and MkPadi, M.C. (2004) The Influence of Pressure Losses On Reducing Nox from Gas Burner System Applying Water Cooling Technique. Journal of Energy & Environment (3). pp. 49-59. ISSN 1985 - 7462

Mohd. Jaafar, Mohammad Nazri and Ani, Farid Nasir and Mustapa, Azizi (2002) Kaedah pengurangan emisi dari pembakar lapisan tetap menggunakan udara tambahan/berperingkat. Jurnal Mekanikal (13). pp. 89-94. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2011) The reduction of noxious emissions using urea based on selective non-catalytic reduction in small scale bio fuel combustion system. Modern Applied Science, 5 (2). pp. 108-112. ISSN 1913-1844

Mohd. Jaafar, Mohammad Nazri and Hussain, A. H. and Ishak, M. S. A. (2011) Catalytic combustion system for use in Malaysia small gas turbine: a feasibility study. International Review of Mechanical Engineering, 5 (1). pp. 100-105. ISSN 1970-8734

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohamad Shaiful Ashrul (2011) The used of aqueous urea solution in reduction of noxious emissions in bio fuel combustion system using selective non-catalytic reduction. Modern Applied Science, 5 (4). pp. 30-36. ISSN 1913-1844

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohammad Shaiful Ashrul and Saharin, Sanisah (2010) Removal of NOx and CO from a burner system. Environmental Science & Technology, 44 (8). 3111 -3115. ISSN 0013-936X

Mohd. Jaafar, Mohammad Nazri and Jusoff, K. and Osman, M. S. and Ishak, M. S. A. (2011) Combustor aerodynamic using radial swirler. International Journal of Physical Sciences, 6 (13). pp. 3091-3098. ISSN 1992-1950

Mohd. Jaafar, Mohammad Nazri and Nor, M. K. F. M. and Ishak, M. S. A. (2011) Aerodynamic study of combustor using axial swirler. International Review of Mechanical Engineering, 5 (1). pp. 92-99. ISSN 1970-8734

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2004) Development of solid rocket propulsion system at UTM. Jurnal Mekanikal (18). pp. 111-121. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2009) Propelan pepejal kalium nitrat difabrikasi kaedah pengacuanan mampat. Jurnal Teknologi, 50 (F). pp. 41-51. ISSN 2180-3722

Mohd. Kameil Abdul Hamid, (2014) Brake wear particle size and shape analysis of non-asbestos organic (NAO) and semi metallic brake pad. Jurnal Teknologi, 71 (2). pp. 129-134. ISSN 0127-9696

Mohd. Kameil Abdul Hamid, (2014) Burnishing effect on disc brake corrosion and frictional performance of corroded disk. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 59-64. ISSN 0127-9696

Mohd. Kameil Abdul Hamid, (2014) Effect of brake pad design on friction and wear with hard particle present. Jurnal Teknologi, 71 (2). pp. 135-138. ISSN 0127-9696

Mohd. Kameil Abdul Hamid, (2014) External hard particle size effect on changes in frictional performance and grit embedment during drag and stop mode braking. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 65-73. ISSN 0127-9696

Mohd. Nasir, Mohd. Nazri and Fritz, Olaf-Lehman and Stanislav, Gorb (2009) Force and deformation modeling of the flapping wing: Calliphora Vicina. Jurnal Mekanikal (28). pp. 57-84. ISSN 0127-3396

Mohd. Nasir Tamin, (2014) Cyclic cohesive zone model for simulation of fatigue failure process in adhesive joints. Applied Mechanics and Materials, 606 . pp. 217-221. ISSN 1660-9336

Mohd. Nasir Tamin, (2014) Effect of starter defect to GIIC of unidirectional CFRP composite. Applied Mechanics and Materials, 493 . pp. 773-776. ISSN 1660-9336

Mohd. Nasir Tamin, (2014) Material parameters for creep rupture of austenitic stainless steel foils. Journal of Materials Engineering and Performance, 23 (8). pp. 2858-2863. ISSN 1059-9495

Mohd. Norddin, Khairul Hafiz Norddin and Mat Saman, Muhamad Zameri (2012) Implementation of total productive maintenance concept in a fertilizer process plant. Jurnal Mekanikal (34). pp. 66-82. ISSN 0127-3396

Mohd. Pauzi Abd. Ghani, (2014) Experimental analysis on the mooring lines force behaviour of semi-submersible in regular waves. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 45-51. ISSN 0127-9696

Mohd. Rohani, Jafri and Syed Hassan, Syed Ahmad Helmi and Chan, Eu Lene (1999) Characterization of a wave soldering process using Taguchi method. Jurnal Mekanikal (8). ISSN 0127-3396

Mohd. Rohani, Jafri and Tamat, Suhaimi (2001) Peningkatan Kualiti Reka Bentuk Kerusi Sekolah Rendah Dengan Mengintegrasikan Kaedah Qfd Dan Kejuruteraan Nilai. Jurnal Teknologi A (35A). pp. 35-46. ISSN 0127-9696

Mohd. Rohani, Jafri and Mohd. Yusof, Sha’ri and Mohamad, Ismail (2010) The development of a survey instrument for measuring a relationship between statistical process control success factors and performance. Jurnal Mekanikal : An International Journal (30). pp. 1-16. ISSN 0127-3396

Mohd. Rohani, Jafri and Zahraee, Seyed Mojib and Hatami, Milad and Bavafa, Ali Asghar and Ghafourian, Kambiz (2014) Application of statistical taguchi method to optimize main elements in the residential buildings in Malaysia based energy consumption. Applied Mechanics and Materials, 606 . pp. 265-269. ISSN 1660-9336

Mohd. Saad, Rozaimi and Hussin, Radhwan and Hussin, Razaidi and Mohd. Dawi, Mohd. Syedi Imran (2012) An optimization of plastic injection molding parameters using Taguchi optimization method. Asian Transactions on Engineering, 2 (5). pp. 75-80. ISSN 2221-4267

Mohd. Salman Leong, (2014) Experimental investigation on the use of bispectral analysis in detecting nonlinear faults in hydraulic machines. Applied Mechanics and Materials, 606 . pp. 147-151. ISSN 1660-9336

Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar and Hudha, Khisbullah (2008) Semi-active suspension for ride improvement using stability augmentation system control algorithm. Jurnal Mekanikal (26). pp. 86-95. ISSN 0127-3396

Mohd. Shuisma Mohd. Ismail, (2014) Improving product classification through product family segregation. ARPN Journal of Engineering and Applied Sciences, 9 (5). pp. 775-782. ISSN 1819-6608

Mohd. Sies, Mohsin and Abdul Wahid, Mazlan (2009) Numerical investigation of the turbulance combustion interaction in non-premixed CH4 /air flames. International Journal Of Application Math And Mechanical .

Mohd. Taib, Jamaludin (2002) Feature research : review and future direction. Jurnal Mekanikal (13). pp. 1-10. ISSN 0127-3396

Mohd. Yazid Yahya, (2014) Development of rigid biocomposite polyurethane foam for load bearing application. Jurnal Teknologi (Sciences and Engineering), 68 (3). pp. 53-56. ISSN 2180-3722

Mohd. Yazid Yahya, (2014) Loading rate effect on flexural and indentation behaviour of foam core composite sandwich panel. Jurnal Teknologi, 71 (2). pp. 159-162. ISSN 0127-9696

Mohd. Yazid Yahya, (2014) Mechanical behavior of functionally graded sandwich hollow cylinders under internal pressure. Advanced Materials Research, 845 . pp. 360-366. ISSN 1022-6680

Mohd. Yusof, Noordin and Mohd. Zainal, Affandi and Denni Kurniawan, Hendriko (2008) Hard turning of cold work tool steel using wipper ceramic tool. Jurnal Mekanikal (25). pp. 92-105. ISSN 0127-3396

Mohd. Yusof, Noordin and Sharif, Safian and D., Kurniawan (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Materials And Manufacturing Processes, 25 (6). 370 - 377. ISSN 1042-6914

Mohd. Yusop, Mohd. Zamri and Ghosh, Pradip and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki and Sasase, Masato (2011) Structural change of ion-induced carbon nanofibers by electron current flow. Journal Of Vacuum Science & Technology B, 29 (4). ISSN 1071-1023

Mohd. Zamri Mohd. Yusop, (2014) Direct observation of structural change in Au-incorporated carbon nanofibers during field emission process. Carbon, 75 . pp. 277-280. ISSN 0008-6223

Mohd. Zamri Mohd. Yusop, (2014) Effect of surface morphology on the field emission property of ZnO films. Physica Status Solidi (C) Current Topics in Solid State Physics, 11 (8). pp. 1349-1352. ISSN 1862-6351

Mohd. Zamri Mohd. Yusop, (2014) Field emission properties of chemical vapor deposited individual graphene. Applied Physics Letters, 104 (9). ISSN 0003-6951

Mohd. Zarhamdy Md. Zain, (2014) Investigation performance of heat exchanger on thermoacoustic heat engine for harvesting a waste heat. Applied Mechanics and Materials, 465-46 . pp. 1262-1266. ISSN 1660-9336

Mohd. Zarhamdy Md. Zain, (2014) A nonparametric approach using artificial intelligence in vibration and noise reduction of flexible systems. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (8). pp. 1329-1347. ISSN 2041-2983

Mohd. Zulkifli, Mohamad Shaiful and Priyanto, Agoes (2013) Analysis of motion on FPSO in shallow water with a non-collinear environment. Journal Ocean, Mechanical and Aerospace - Science and Engineering - (JOMAse), 1 . pp. 18-28. ISSN 2354-7065

Mohd. Zulkifli Mohd. Yunus, (2014) Analyzing accidents caused by overturn of vehicles (case study of Iran-Zanjan province in 2010). Research Journal of Applied Sciences, Engineering and Technology, 7 (12). pp. 2509-2515. ISSN 2040-7467

Mokhtari, Mohammad Hossein and Adnan, Robiah and Busu, Ibrahim (2013) A new approach for developing comprehensive agricultural drought index using satellite-derived biophysical parameters and factor analysis method. Natural Hazards, 65 (3). pp. 1249-1274. ISSN 0921-030X(Print); 1573-0840(Electronics)

Mon T.T., (2011) Performance of cryogenic machining with nitrogen gas in machining of titanium. Applied Mechanics and Materials, 52-54 . pp. 2003-2008. ISSN 1660-9336

Morad, Noor and Mohd. Zin, Rohani and Mohd. Yusuf, Khairiyah and Abd. Aziz, Mustafa (2011) Response to letter to the editor: artificial neural network or common sense based on insight? Journal of the American Oil Chemists Society, 88 (7). pp. 1073-1074. ISSN 0003-021X

Motasemi, F. and Ani, Farid Nasir (2012) A review on microwave-assisted production of biodiesel. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4719-4733. ISSN 1364-0321

Mozafari, (2012) Mechanical behavior between carbon fiber and epoxy matrix for thin adhesive layers. Applied Mechanics And Materials, 121-12 . pp. 4426-4430. ISSN 1660-9336

Mozafari, (2012) OptImal design of non-monotonic heat-conducting thin adhesive layer based on imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 949-955.

Mozafari, (2012) Optimization of temperature-dependent functionally graded material based on colonial competitive algorithm. Applied Mechanics And Materials, 121-12 . pp. 4575-4580. ISSN 1660-9336

Mozafari, (2012) Optimum critical buckling of functional graded plates under non-linear temperature by using imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 3429-3433. ISSN 1660-9336

Mozafari, (2012) Verification of non-uniform heat-conducting interphase by using finite element method. Applied Mechanics And Materials, 121-12 . pp. 4897-4901. ISSN 1660-9336

Mozafari, Hamid and Abdi, Behzad and Ayob, Amran (2010) Optimization of composite plates based on imperialist competitive algorithm. International Journal on Computer Science and Engineering, 2 (9). pp. 2816-2819. ISSN 2229-5631 (Print); 0975-3397 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Influence of thickness variation on the buckling load in plates made of functionally graded materials. European Journal of Scientific Research, 47 (3). pp. 422-435. ISSN 1450-216X

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Using imperialist competitive algorithm to find the optimum shape design of internally pressurized torispherical dome ends based on buckling pressure. International Journal of Engineering (IJE), 4 (5). pp. 338-356. ISSN 1985-2312 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Verification of the thermal buckling load in plates made of functional graded materials. International Journal of Engineering (IJE), 4 (5). pp. 338-356. ISSN 1985-2312 (Electronic)

Mozafaria, Hamid and Hassanipour, Meysam and Ayob, Amran (2010) Investigation of thickness and thermal treatments on the deep drawing process for the aluminum plate. International Journal of Engineering Science and Technology, 2 (10). pp. 5915-5920. ISSN 0975-5462

Mubarak, A. and Hamzah, Esah and Toff, M. R. M. (2005) Review of physical vapour deposition (PVD) techniques for hard coating. Jurnal Mekanikal (20). pp. 42-51. ISSN 0127-3396

Mubarak, A. and Akhter, Parvez and Hamzah, Esah and Mohd. Toff, Mohd. Radzi and A. Qazi, Ishtiaq (2008) Effect of Coating Thickness on the Properties of TiN Coatings Deposited on Tool Steels using Cathodic ARC PVD Techique. Surface Review and Letters, 15 (4). pp. 401-410. ISSN 0218-625X

Mubarak, A. and Hamzah, E. and M. R. M., Toff (2008) Study of macrodroplet and growth mechanisms with and without ion etchings on the properties of TiN coatings deposited on HSS using cathodic arc physical vapour deposition technique. Materials Science and Engineering: A, 474 (1-2). pp. 236-242. ISSN 09215093

Mubarak, A. and Hamzah, E. and M. Toff, M. R. (2006) Influence of Nitrogen Gas Flow Rate on the Microstructural and Mechanical Properties of Tin Deposited Carbon Steel Synthesized by CAE PVD Technique. ASEAN Journal on Science and Technology for Development, 23 (4). pp. 239-251. ISSN 0217-5460

Mubarak, Ali and Hamzah, Esah and Mohd Toff, Mohd Radzi and Hashim, Abdul Hakim (2005) The effect of nitrogen gas flow rate on the properties of tin-coated high-speed steel (HSS) using cathodic ARC evaporation physical vapor deposition (PVD) technique. Surface Review and Letters, 12 (4). pp. 631-643. ISSN 0218625X

Mubarak, Ali and Hamzah, Esah and Mohd. Toff, Mohd. Radzi and Hashim, Abdul Hakim (2005) The effect of nitrogen gas flow rate on the properties of tin-coated High-Speed Steel (Hss) Using cathodic arc evaporation Physical Vapor Deposition (Pvd) technique. Surface Review and Letters, 12 (4). pp. 631-643. ISSN 0218-625X

Mueen Uddin, (2012) Energy efficiency and low carbon enabler green it framework for data centers considering green metrics. Renewable And Sustainable Energy Reviews, 16 (6). pp. 4078-4094. ISSN 1364-0321

Muhamad, Pauziah and Darus, Amer Nordin (2003) An exergy analysis of an air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 34-47. ISSN 1675-2228

Muhamad, Sallehuddin and Ahmad, Nurul Huda Teaching aircraft design with flyable prototype. Proceedings of the 4th International Product Design & Development .

Muhamad Aziz Mat Yajid, (2014) Investigation of three steps of hot corrosion process in Y2O3 stabilized ZrO2 coatings including nano zones. Journal of Rare Earths, 32 (10). p. 1002. ISSN 1002-0721

Muhamad Azizi Mat Yajid, (2014) Aluminum-copper bilayers thin films deposited at room temperature by RF magnetron sputtering. Applied Mechanics and Materials, 606 . pp. 105-109. ISSN 1660-9336

Muhamad Azizi Mat Yajid, (2014) Corrosion resistance investigation of nanostructured Si- and Si/TiO2-coated Mg alloy in 3.5% NaCl solution. Vacuum, 108 . pp. 61-65. ISSN 0042-207X

Muhamad Azizi Mat Yajid, (2014) Effect of Y2O3 stabilized ZrO2 coating with tri-model structure on bi-layered thermally grown oxide evolution in nano thermal barrier coating systems at elevated temperatures. Journal of Rare Earths, 32 (1). pp. 57-77. ISSN 1002-0721

Muhamad Azizi Mat Yajid, (2014) Investigation of intermetallic phase formation and structural analysis in annealed al/cu bilayer thin films. Advanced Materials Research, 845 . pp. 221-225. ISSN 1022-6680

Muhamad Azizi Mat Yajid, (2014) Maerogel: alternative for thermal barrier coating topcoat. Advanced Materials Research, 845 . pp. 330-334. ISSN 1022-6680

Muhamad Azizi Mat Yajid, (2014) Microstructural characterization and corrosion resistance evaluation of nanostructured Al and Al/AlCr coated Mg-Zn-Ce-La alloy. Journal of Alloys and Compounds, 615 . pp. 657-671. ISSN 0925-8388

Muhamad Noor Harun, (2014) Influence of polyethylene thickness on Axis pin in linked elbow implant. Advanced Materials Research, 845 . pp. 194-198. ISSN 1022-6680

Muhamad Zameri, M. S. and Wai, P. C. (2001) Application of total productive maintenance (TPM) concept in palm oil mill factory. Jurnal Mekanikal (12). ISSN 0127-3396

Muhamad Zameri Mat Saman, (2014) Assessing sustainability performance of polymer processing: case study of hollow fiber membrane. Advanced Materials Research, 903 . pp. 365-370. ISSN 1022-6680

Muhamad Zameri Mat Saman, (2014) A decision tool for product configuration designs based on sustainability performance evaluation. Advanced Materials Research, 903 . pp. 384-389. ISSN 1022-6680

Muhamad Zameri Mat Saman, (2014) Fuzzy logic approach for assessing sustainability: Methodology development for hollow fiber membrane module. Advanced Materials Research, 845 . pp. 579-583. ISSN 1022-6680

Muhamed, Mohd Rushaidin and Shaikh Salleh, Sheikh Hussain and Omar, Mohd Hafizi and Arooj, Adeela (2010) Use of instantaneous energy of ABR signals for fast detection of wave V. Journal Biomedical Science and Engineering, 3 (8). pp. 816-821. ISSN 1937-688X

Muhammad Adil Khattak, (2014) Effect of pitting corrosion on strength of AISI 410 stainless steel compressor blades. Applied Mechanics and Materials, 606 . pp. 227-231. ISSN 1660-9336

Muhammad Shuhaimi, Shamsuddin and Jafri, Mohd. Rohani (2001) Kajian Kemungkinan Aplikasi Konsep Mesin Fmea (Failure Mode And Effect Analysis): Kajian Kes Di Seksyen Mills Di Kilang Keluli. Jurnal Teknologi A (34A). pp. 17-28. ISSN 0127–9696

Muhammadu, Muhamadu Masin and Md Sheriff, Jamaluddin and Hamzah, Esah (2013) Effect of flow pattern at pipe bends on corrosion behaviour of low carbon steek and its challenges. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 55-65. ISSN E–ISSN 2180–3722

Mumr, F. A. and Sidik, N. A. C. and Ibrahim, N. I. N. (2011) Numerical simulation of natural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Musa, Hamidon and Mat Saman, Muhamad Zameri and Hau, Lian Chuan (2002) Management and control of non-direct materials in an electronic company. Jurnal Mekanikal (13). pp. 95-116. ISSN 0127-3396

Musa, Md Nor and Saqr, Khalid M. (2009) Optimization of fin geometry of an exhaust heat exchanger for thermoelectric generators. Journal International, 4 (4).

Musa, Md. Nor (2013) Friction analysis on vane of an existing and of a novel multivane rotary compressor. Applied Mechanics and Materials, 284-28 . pp. 763-767. ISSN 1662-7482

Musa Mailah, (2014) Active suspension system for passenger vehicle using active force control with iterative learning algorithm. WSEAS Transactions on Systems and Control, 9 . pp. 120-129. ISSN 2224-2856

Musa Mailah, (2014) AFC motor control using low cost and mobile data acquisition system with dsPIC30 microcontroller and Lubin Kerhuel blockset for MATLAB/Simulink. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 806-810. ISSN 1660-9336

Musa Mailah, (2014) Algorithm to detect roundabout environments for mobile robot based on laser range finder and camera. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 796-800. ISSN 1660-9336

Musa Mailah, (2014) Hardware-in-the-loop simulation for active force control with iterative learning applied to an active vehicle suspension system. Applied Mechanics and Materials, 465-46 . pp. 801-805. ISSN 1660-9336

Musa Mailah, (2014) Implementation of laser simulator search graph approach for detection and path planning in roundabout environments. WSEAS Transactions on Signal Processing, 10 (1). pp. 106-115. ISSN 2224-3488

Musa Mailah, (2014) Performance comparison between sliding mode control and active force control for a nonlinear anti-lock brake system. WSEAS Transactions on Systems and Control, 9 . pp. 101-107. ISSN 2224-2856

Musa Mailah, (2012) Practical active force control with iterative learning scheme applied to a pneumatic artificial muscle actuated robotic arm. International Journal Of Mechanics, 6 (1). pp. 88-96. ISSN 1998-4448

Muslim M.T., (2012) Electronic control unit design for a retrofit fuel injection system of a 4-stroke 1-cylinder small engine. Applied Mechanics and Materials, 229-23 . pp. 968-972. ISSN 1660-9336

Mustafa Yusof, (2014) An accurate upper bound solution for plane strain extrusion through a wedge-shaped die. Scientific World Journal, 2014 . ISSN 2356-6140

Mustafa Yusof, (2014) A new solution for the compression of a two-layer strip and its application to analysis of bonding by rolling. Advances in Materials Science and Engineering . ISSN 1687-8434

Mustafa Yusof, (2014) Occupant kinematic study in safe bus superstructure. 4TH MECHNICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 465-46 . pp. 32-38. ISSN 1660-9336

N., Zakuan and S. M., Yusof and M. Z., Mat Saman and A. M., Shaharoun (2010) Confirmatory factor analysis of TQM practices in Malaysia and Thailand automotive industries. International Journal of Business and Managemen, 5 (1). pp. 160-175. ISSN 1833-3850 (Print); 1833-8119 (Electronic)

Nagarajan, R. and Yaacob, Sazali and Pandian, P. and Karthigayan, M. and Amin, Shamsudin and Khalid, Marzuki (2007) A real time marking inspection scheme for semiconductor industries. The international journal of advanced manufacturing technology, 34 (9-10). pp. 926-932. ISSN 0268-3768 (Print) 1433-3015 (Online)

Naghizadeh, Farnaz and Abdul Kadir, Mohammed Rafiq and Doostmohammadi, Ali and Roozbahani, Fatemeh and Iqbal, Nida and Taheri, Mohammad Mahdi and Naveen, Sangeetha Vasudevaraj Asudevaraj and Kamarul, T. (2015) Rice husk derived bioactive glass-ceramic as a functional bioceramic: synthesis, characterization and biological testing. Journal of Non-Crystalline Solids, 427 . pp. 54-61. ISSN 0022-3093

Nakis, M. and Abdul Malik, Adi Maimun and Ahmeda, Yasser M. and Behrouzi, F. and Steen, S. and Tarmizi, A. (2015) Hydrodynamic resistance analysis of new hull design for multipurpose amphibious vehicle applying with finite volume method. Jurnal Teknologi, 74 (5). pp. 73-76. ISSN 2180-3722

Nakisa, M. and Maimun, A. and Ahmed, Y. M. and Behrouzi, F. and Jaswara, Tarmizi A. (2015) Air lubrication influence on frictional resistance reduction of multi-purpose amphibious vehicle. Jurnal Teknologi, 74 (5). pp. 1-3. ISSN 2180–3722

Nasir Ani, Farid and Salema, Arshad Adam (2010) Microwave induced pyrolysis of oil palm biomass. Bioresource Technology, 102 (3). pp. 3388-3395. ISSN 0960-8524

Nasution, Henry and Wan Hassan, Mat Nawi (2006) Potential electricity savings by variable speed control of compressor for air conditioning systems. Clean Technologies and Environmental Policy, 8 (2). pp. 105-111. ISSN 1618-954X (Print) 1618-9558 (Online)

Nasution, Henry and Abdul Aziz, Azhar and Dahlan, Afiq Aiman and Zulkifli, Amirah Haziqah and Sumeru, Sumeru (2015) Indoor temperature control and energy saving potential of an air conditioning system using PD controller. Jurnal Teknologi, 76 (11). pp. 63-67. ISSN 2180-3722

Navaei, Ali S. and Mohammed, Hussein A. and Munisamy, Kannan M. and Yarmand, Hooman and Gharehkhani, Samira (2015) Heat transfer enhancement of turbulent nanofluid flow over various types of internally corrugated channels. Powder Technology, 286 . pp. 332-341. ISSN 0032-5910

Nezhadi, Amirhossein and Abdul Rahman, Roslan and Ayob, Amran and Fard, Keramat Malekzadeh (2012) Free and forced vibrations of FGM conical shell under impulse loads. Research Journal of Applied Sciences, Engineering and Technology, 4 (20). pp. 4055-4065. ISSN 2040-7467

Ng, Teng Yong and Yeak, S. H. and Liew, Kim Meow (2008) Coupling of ab initio density functional theory and molecular dynamics for the multiscale modeling of carbon nanotubes. Nanotechnology , 19 (5). ISSN 0957-4484

Ngadiman, Nor Hasrul Akhmal and Idris, A. and Irfan, Muhammad and Kurniawan, Denni and Mohd. Yusof, Noordin and Nasiri, Rozita (2015) ?-Fe<inf>2</inf>O<inf>3</inf> nanoparticles filled polyvinyl alcohol as potential biomaterial for tissue engineering scaffold. Journal of the Mechanical Behavior of Biomedical Materials, 49 . pp. 90-104. ISSN 1751-6161

Ngali, Mohd. Zamani and Osman, Kahar and Zakaria, Nazri Huzaimi (2015) Non-dimensional distribution pattern analysis of particle transportation in simplified pipeline system. Jurnal Teknologi, 77 (12). pp. 99-104. ISSN 2180-3722

Ngali, Z. and Huzaimi, Nazri and Ying, Engpei and Osman, Kahar (2015) Four-dimensional simulation of particle transportation in simplified passageways system. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7103-7106. ISSN 1819-6608

Niakan, (2012) Effect of pressure on structure and properties of lost foam casting of al-11si cast alloy. Applied Mechanics And Materials, 110-11 . pp. 639-643. ISSN 1660-9336

Nik Ahmad Ridhwan Nik Mohd, (2014) Numerical prediction of blended wing body aerodynamic characteristics at subsonic speed. Jurnal Teknologi, 71 (2). pp. 65-69. ISSN 0127-9696

Nik Mohd., Nik Ahmad Ridhwan and Barakos, George N. (2012) Computational aerodynamics of hovering helicopter rotors. Jurnal Mekanikal, 34 . pp. 16-46. ISSN 0127-3396

Nikakhtar, Amin and Hosseini, Alireza Abbasian and Wong, Kuan Yew (2012) Sensitivity analysis of construction processes using computer simulation: a case study. Advanced Science Letters, 13 (1). pp. 680-684. ISSN 1936-6612

Niw, Chang Chee and Abu Bakar, Abd. Rahim (2007) Finite element modeling of arc welded joints. Jurnal Mekanikal (23). pp. 15-30. ISSN 0127-3396

Noordin, M. Y. and Venkatesh, V. C. and Sharif, Safian (2007) Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools. Journal of Materials Processing Technology, 185 (1-3). pp. 83-90. ISSN 0924-0136

Noordin, M. Y. and Venkatesh, V. C. and Sarathy, D. and Abdul, A. (2004) Cutting performance of coated diamond and triangular-shaped carbide inserts when turning AISI 1045 Steel. Pertanika Journal of Science & Technology, 12 (1). pp. 73-84. ISSN 0128-7680

Noordin, M. Y. and Venkatesh, V. C. and Sharif, S. and Elting, S. and Abdullah, A. (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

Noordin, Mohd Yusof and Venkatesh, Vasisht C. and Sharif, Safian and Elting, S. and Abdullah, A. (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

Noordin , M. Y. and Y., C. Tang and Kurniawan, D. (2007) The use of TiAIN coated carbide tool when finish machining hardened stainless steel. International Journal Precision Technology, 1 (1). pp. 21-29. ISSN 1755-2060

Noordin Mohd. Yusof, (2014) Composition modification of electroplated nickel interlayer on tungsten carbide substrate by thermal carburizing. Advanced Materials Research, 845 . pp. 378-381. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Effect of buffer size variation on remanufacturing environment. Advanced Materials Research, 845 . pp. 755-759. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools. Journal of Mechanical Science and Technology, 28 (11). pp. 4727-4736. ISSN 1738-494X

Noordin Mohd. Yusof, (2014) Effect of electrospinning parameters setting towards fiber diameter. Advanced Materials Research, 845 . pp. 985-988. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Evaluating the effect of main factors in determining speed bump location based on taguchi design of experiments. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 99-104. ISSN 0127-9696

Noordin Mohd. Yusof, (2014) Low-cost strategy factors in airline industry: the AirAsia case. Advanced Materials Research, 845 . pp. 652-657. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Micro-electrode fabrication process using EDM. Advanced Materials Research, 845 . pp. 980-984. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Performance measurement system for sustainable supply chain management. Advanced Materials Research, 845 . pp. 516-520. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) Power demand calculations in turning of aluminum alloy. Advanced Materials Research, 845 . pp. 786-789. ISSN 1022-6680

Noordin Mohd. Yusof, (2014) A review of inventory management for remanufacturing environment. Advanced Materials Research, 845 . pp. 618-622. ISSN 1022-6680

Nor, N. H. M. and Muhamad, N. and Ariffm, A. K. and Ruzi, M. and Jamaladin, Khairur Rijal and Sufizar, A. (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Nor, N. H. M. and Muhamad, N. and Ibrahim, M. H. I. and Ruzi, M. and Jamaladin, Khairur Rijal (2011) Optimization of injection molding parameter of ti-6al-4v powder mix with palm stearin and polyethylene for the highest green strength by using taguchi method. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 126-132. ISSN 1823-0334

Nor Azwadi, C. S. and Mamat, Rizalman (2015) Recent progress on Lattice Boltzmann simulation of nanofluids: a review. International Communications in Heat and Mass Transfer, 66 . pp. 11-22. ISSN 0735-1933

Nor Azwadi Che Sidik, (2012) Accurate numerical prediction of incompressible fluid flow in lid-driven cavities. Applied Mechanics And Materials, 110-11 . pp. 4365-4372. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Advanced techniques for reducing spray losses in agrochemical application system. Life Science Journal, 11 (3). pp. 56-66. ISSN 1097-8135

Nor Azwadi Che Sidik, (2014) Application of the lattice Boltzmann method for fluid flow around complex geometry. Applied Mechanics and Materials, 554 . pp. 230-235. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor end wall. Applied Mechanics and Materials, 554 . pp. 225-229. ISSN 1660-9336

Nor Azwadi Che Sidik, (2013) Cubic interpolation profile method for prediction of thermal fluid flow through porous media. International Review of Mechanical Engineering, 7 (3). pp. 563-569. ISSN 1970-8734

Nor Azwadi Che Sidik, (2012) Cubic-interpolated-pseudo-particle method to predict dynamic behaviour of fluid in shear driven cavity. Applied Mechanics And Materials, 110-11 . pp. 377-384. ISSN 1660-9336

Nor Azwadi Che Sidik, (2013) Dynamic and thermodynamic analysis of film-cooling. International Review of Mechanical Engineering, 7 (3). pp. 570-577. ISSN 1970-8734

Nor Azwadi Che Sidik, (2014) Effect of nozzle angleson spray losses reduction. Applied Mechanics and Materials, 564 . pp. 216-221. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Effect of nozzle type on spray drift in banding application. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 520-525. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Eulerian-lagrangian numerical scheme for contaminant removal from different cavity shapes. Arabian Journal For Science and Engineering, 39 (4). pp. 3181-3189. ISSN 1319-8025

Nor Azwadi Che Sidik, (2014) Evaluation of spatial application accuracy of sensing-spraying system for variable rate application of oil palm trees. Advances in Environmental Biology, 8 (10). pp. 579-584. ISSN 1995-0756

Nor Azwadi Che Sidik, (2014) Film cooling effectiveness in a gas turbine engine: a review. Jurnal Teknologi, 71 (2). pp. 25-35. ISSN 0127-9696

Nor Azwadi Che Sidik, (2014) Film-cooling techniques at the end of combustor and inlet of turbine in a gas turbine engine: a review. Applied Mechanics and Materials, 554 . pp. 236-240. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Fluid flow and heat transfer characteristics of nanofluids in heat pipes: a review. International Communications in Heat and Mass Transfer, 56 . pp. 50-62. ISSN 0735-1933

Nor Azwadi Che Sidik, (2014) Four-sided lid-driven cavity flow using time splitting method of Adams-Bashforth scheme. International Journal of Automotive and Mechanical Engineering, 9 (1). pp. 1501-1510. ISSN 2229-8649

Nor Azwadi Che Sidik, (2014) Heat transfer augmentation in the straight channel by using nanofluids. Case Studies in Thermal Engineering, 3 . pp. 59-67. ISSN 2214-157X

Nor Azwadi Che Sidik, (2014) Influence of particle concentration and temperature on the thermophysical properties of CuO/R134a nanorefrigerant. International Communications in Heat and Mass Transfer, 58 (1). pp. 79-84. ISSN 0735-1933

Nor Azwadi Che Sidik, (2011) Lattice boltmann simulation of cavity flows at various reynolds number. International Journal of Thermal Sciences, 1290-0 (4). pp. 1909-1919.

Nor Azwadi Che Sidik, (2014) Lattice Boltzmann method for convective heat transfer of nanofluids - A review. Renewable and Sustainable Energy Reviews, 38 . pp. 864-875. ISSN 1364-0321

Nor Azwadi Che Sidik, (2014) Mathematical correlations on factors affecting the thermal conductivity and dynamic viscosity of nanorefrigerants. International Communications in Heat and Mass Transfer, 58 . pp. 125-131. ISSN 0735-1933

Nor Azwadi Che Sidik, (2014) Measurement of film effectiveness for cylindrical and row trenched cooling holes at different blowing ratios. Numerical Heat Transfer Part A-Applications, 66 (10). pp. 1154-1171. ISSN 1040-7782

Nor Azwadi Che Sidik, (2014) Natural convection heat transfer in horizontal concentric annulus between outer cylinder and inner flat tube using nanofluid. International Communications in Heat and Mass Transfer, 57 . pp. 65-71. ISSN 0735-1933

Nor Azwadi Che Sidik, (2014) Numerical investigation of natural convection of nanofluids in L-shaped enclosures. MATERIALS ENGINEERING AND TECHNOLOGY, 849 . pp. 391-396. ISSN 1022-6680

Nor Azwadi Che Sidik, (2012) Numerical prediction of natural convection heat transfer through porous media by the Lattice Boltzmann Method. Applied Mechanics And Materials, 110-11 . pp. 4439-4444. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Numerical simulation of high Reynolds number flow structure in a lid-driven cavity using MRT-LES. Applied Mechanics and Materials, 554 . pp. 665-669. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) Numerical simulation of wind flow structures and pollutant dispersion within street canyon under thermally unstable atmospheric conditions. Applied Mechanics and Materials, 554 . pp. 655-659. ISSN 1660-9336

Nor Azwadi Che Sidik, (2013) Numerical solution to thermal fluid flow through porous media using lattice boltzmann method. International Review of Mechanical Engineering, 7 (6). pp. 1218-1222. ISSN 1970-8734

Nor Azwadi Che Sidik, (2012) Prediction of flow characteristics in stgenotic artery using CIP scheme. International Journal of Mechanical and Material Engineering, 7 (1). ISSN 1823-0334

Nor Azwadi Che Sidik, (2014) Prediction of wind flow around high-rise buildings using RANS models. Applied Mechanics and Materials, 554 . pp. 724-729. ISSN 1660-9336

Nor Azwadi Che Sidik, (2014) A review on preparation methods and challenges of nanofluids. International Communications in Heat and Mass Transfer, 54 . pp. 115-125. ISSN 0735-1933

Nor Azwadi Che Sidik, (2014) A review on the flow structure and pollutant dispersion in urban street canyons for urban planning strategies. Simulation-Transactions of the Society For Modeling and Simulation International, 90 (8). pp. 892-916. ISSN 0037-5497

Nor Kamarudin, Khairol Sozana (2010) Polymeric membrane used in natural gas processing to separate carbon dioxide: the facing problems and solutions. Journal of Environmental Science and Engineering, 4 (1). pp. 25-32. ISSN 1934-8932

Norhayati Ahmad, (2014) Characterization of Nigerian clay as porous ceramic material. Advanced Materials Research, 845 . pp. 256-260. ISSN 1022-6680

Norhayati Ahmad, (2014) Influence of carbon content on the mechanical properties of ultra-high strength of coated steel wire. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 89-95. ISSN 2180-3722

Norizah Redzuan, (2014) Effect of cooling/lubrication using cooled air, MQL + cooled air, N2 and CO2 gases on tool life and surface finish in machining - a review. Advanced Materials Research, 845 . pp. 889-893. ISSN 1022-6680

Normah Mohd. Ghazali, (2014) Multiobjective optimization of microchannels with experimental convective heat transfer coefficient of liquid ammonia. MODERN ADVANCES IN APPLIED INTELLIGENCE, IEA/AIE 2014, PT I, 8481 L (PART 1). pp. 470-478. ISSN 0302-9743

Normah Mohd. Ghazali, (2014) Optimization of a Rectangular Microchannel Heat Sink Using Entropy Generation Minimization (EGM) and Genetic Algorithm (GA). ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 39 (10). pp. 7211-7222. ISSN 1319-8025

Normah Mohd. Ghazali, (2014) Optimization of thermal performances and pressure drop of rectangular microchannel heat sink using aqueous carbon nanotubes based nanofluid. Applied Thermal Engineering, 62 (2). pp. 492-499. ISSN 1359-4311

Normah Mohd. Ghazali, (2014) Outdoor ventilation performance of various configurations of a layout of two adjacent buildings under isothermal conditions. Building Simulation, 8 (1). pp. 81-98. ISSN 1996-3599

Norwazan, A. R. and Mohd. Jaafar, Mohammad Nazri (2015) The Reynold’s number effect in high swirling flow in unconfined burner. Jurnal Teknologi, 72 (4). pp. 83-89. ISSN 0127-9696

Noshadi, A. and Mailah, Musa and Zolfagharian, A. (2011) Intelligent active force control of a 3-RRR parallel manipulator incorporating fuzzy resolved acceleration control. Applied Mathematical Modelling, 36 (6). pp. 2370-2383. ISSN 0307-904X

Nuraliza, N. and Syahrullail, Samion and Musa, Md. Nor (2015) Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75 (11). pp. 113-122. ISSN 2180-3722

Nuriyadi, Muhammad and Sumeru, Sumeru and Nasution, Henry (2015) The effect of liquid suction heat exchanger sub-cooler on performance of a freezer using R404A as working fluid. Jurnal Teknologi, 76 (11). pp. 57-61. ISSN 0127-9696

Nusyirwan I.F., (2012) RVSM implementation in Malaysia. Applied Mechanics and Materials, 225 . pp. 522-527. ISSN 1660-9336

Nusyirwan, Istas Fahrurrazi and Bil, Cees (2007) Methods of aircraft trajectory optimisation in air combat. Australian and New Zealand Industrial and Applied Mathematics Journal, 47 . C649-C664. ISSN 1446-8735

Ochsner, Andreas and Belova, I. V. and Muthubandara, N. and Murch, G. E. (2007) Modelling of oxygen diffusion and segregation at interfaces in Ag-MgO composites. Defect and Diffusion Forum, 266 . pp. 29-38. ISSN 1012-0386

Ochsner, Andreas and Mishuris, Gennady (2008) A new finite element formulation for thin non-homogenous heat-conducting adhesive layers. Journal of Adhesion Science and Technology, 22 (13). pp. 1365-1378. ISSN 0169-4243

Ochsner, Andreas and Vesenjak, M. and Ren, Z. (2007) Behaviour of cellular structure with fluid fillers under impact loading. International Journal of Multiphysics, 1 (1). n/a. ISSN 1750-9548

Ochsner, Andreas and Vesenjak, Matej and Ren, Zoran (2007) Thermal post-impact behavior of closed-cell cellular structures with fillers - Part I. Materials Science Forum, 553 . pp. 196-201. ISSN 0255-5476

Ochsner, Andreas (2008) Heat transfer in cellular and composite materials. Advanced Engineering Materials , 10 (4). p. 267. ISSN 1438-1656

Ochsner, Andreas and T., Fiedler and H. S., Kim and I. V., Belova and S. W., Sloan and G. E., Murch (2010) Elastic finite element analysis on cross-sections of random hollow sphere structures. Materialwissenschaft Und Werkstofftechnik, 41 (5). 250 - 256. ISSN 1521-4052

Ochsner, Andreas and Belova, I. V. and Murch, G. E. (2011) A special section on new developments of nanostructured particles and materials. Journal Of Biomedical Nanotechnology, 7 (3). pp. 431-432. ISSN 1550-7033

Ochsner, Andreas and C., Veyhl and I. V., Belova and G. E., Murch and T., Fiedler (2010) On the mesh dependence of non-linear mechanical finite element analysis. Finite Elements in Analysis and Design, 46 (5). 371 -378. ISSN 0168-874X

Ochsner, Andreas and Da Silva, F. M. (2011) Materialwissenschaft und Werkstofftechnik: preface. Materialwissenschaft und Werkstofftechnik, 42 (5). p. 341. ISSN 0933-5137

Ochsner, Andreas and Da Silva, Lucas F. M. (2011) Special issue: advanced computational engineering and experimenting (ACEX 2010) preface. Materialwissenschaft UND Werkstofftechnik, 42 (5). p. 341. ISSN 0933-5137

Ochsner, Andreas and Da Silva, Lucas F. M. (2011) Special issue: special issue on joint design 2. International Journal of Adhesion and Adhesives, 31 (5). pp. 271-272. ISSN 0143-7496

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2012) Preface. Materialwissenschaft Und Werkstofftechnik, 43 (5). p. 365. ISSN 0933-5137

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2012) This special issue of materials science and engineering technology preface. Materialwissenschaft Und Werkstofftechnik, 43 (5). p. 365. ISSN 0933-5137

Ochsner, Andreas and Gromada, Magdalena and Mishuris, Gennady (2010) On the evaluation of mechanical properties from the axisymmetric tensile test. Archives Of Metallurgy And Materials, 55 (1). 325 -330. ISSN 1733-3490

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein and Fiedler, Thomas (2010) Numerical prediction of the effective thermal conductivity of open- and closed-cell foam structures. Defect and Diffusion Forum, 297301 . 1210 - 1217. ISSN 1012-0386

Ochsner, Andreas and L. F. M., Da Silva (2010) Experimental engineering and applications. Experimental Mechanics, 50 (5). 561 - 561. ISSN 0014-4851

Ochsner, Andreas and L. F. M., da Silva (2010) Guest editorial. Journal Of Adhesion, 86 (56). 467 - 469. ISSN 0018-9480

Ochsner, Andreas and S. M. H., Hosseini and M., Merkel (2010) Numerical simulation of the mechanical properties of sintered and bonded Perforated Hollow Sphere Structures (PHSS). Journal Of Materials Science & Technology, 26 (8). 730 -736. ISSN 1005-0302

Ochsner, Andreas and Speich, M. and Merkel, M. (2010) Large deformation of core materials for sandwich panels. Materialwissenschaft Und Werkstofftechnik, 41 (5). 270 - 275. ISSN 1521-4052

Ochsner, Andreas and Veyh, C. and Belova, I. V. and Murch, G. E. and Fiedler, T. (2011) Thermal analysis of aluminium foam based on microcomputed tomography. Materialwissenschaft Und Werkstofftechnik, 42 (5). pp. 350-355. ISSN 0933-5137

Ochsner, Andreas and Winkler, R. and Pannert, W. and Merkel, M. (2011) Structure borne sound in metallic hollow sphere structures. Materialwissenschaft UND Werkstofftechnik, 42 (5). pp. 365-369. ISSN 0933-5137

Ochsner, Andreas and Y. S., Nechaev (2010) On physical nanoscale aspects of compatibility of steels with hydrogen and natural gas. Journal Of Nanoscience and Nanotechnology, 10 (2). 1398 -1413. ISSN 1533-4880

Ochsner, Andreas and Gracio, Jose (2007) An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates. International Journal of Adhesion and Adhesives, 27 (2). pp. 129-135. ISSN 0143-7496

Ochsner, Andreas and Stasiek, Michal and Mishuris, Gennady and Gracio, Jose (2007) A new evaluation procedure for the butt-joint test of adhesive technology: determination of the complete set of linear elastic constants. International Journal of Adhesion and Adhesives, 27 (8). pp. 703-711. ISSN 0143-7496

Oechsner, Andreas and Da Silva, Lucas F. M. (2009) Special edition advanced computational engineering and experimenting (ACE-X 2008) preface. Materialwissenschaft und Werkstofftechnik, 40 (3). p. 125. ISSN 0933-5137

Olanrewaju, Oladokun Sulaiman and Tee, Kongfah and Kader, A. S. A. (2015) Water quality test and site selection for suitable species for seaweed farm in east coast of Malaysia. Biosciences Biotechnology Research Asia, 12 . pp. 33-39. ISSN 0973-1245

Olanrewaju, Sulaiman O. and N., Sakinah and A., Amagee and Z., Bahrain and Ahmad, M. Fadhli and Abdul Kader, Abdul Saman and M., Adi and K., Othman (2013) Qualitative risk analysis study of offshore aquaculture ocean plantation system. Global Journal of Science Frontier Research Environment & Earth Science, 13 (1). pp. 1-19. ISSN 2249-4626

Oliveira, B. F. and Cunda, L. A. B. and Oschner, Andreas and Creus, G. J. (2007) Parameter identification to simulate a tensile test applying gurson damage model. APMTAC, Portugal . ISSN 1230-3534

Oliveira, Branca F. de and Cunda, Luiz A. B. da and Oschner, Andreas and Creus, G. J. (2007) Finite element simulation of compression tests on cellular metals. APMTAC, Portugal . ISSN 1230-3534

Oliveira, B. F. and da Cunda, L. A. B. and Öchsner, A. and Creus, G. J. (2009) Hollow sphere structures : a study of mechanical behaviour using numerical simulation. Materialwissenschaft und Werkstofftechnik, 40 (3). pp. 144-153. ISSN 09335137

Oliveira, B. F. and Cunda, L. A. B. and Ochsner, Andreas and Creus, G. J. (2008) Comparison between RVE and full mesh approaches for the simulation of compression tests on cellular metals. Materials Science and Engineering Technology, 39 (2). pp. 133-142. ISSN 0933-5137

Olugu, E. U. and Wong, Kuan Yew (2011) Evaluation of green supply chain management practices in the Malaysian automotive industry. International Journal of Services and Operations Management, 9 (2). pp. 245-258. ISSN 1744-2370

Olugu, E. U. and Wong, Kuan Yew (2011) An expert fuzzy rule-based system for closed-loop supply chain performance assessment in the automotive industry. Expert Systems with Applications, 39 (1). pp. 375-384. ISSN 0957-4174

Olugu, E. U. and Wong, Kuan Yew (2011) Fuzzy logic evaluation of reverse logistics performance in the automotive industry. Scientific Research and Essays, 6 (7). pp. 1639-1649. ISSN 1992-2248

Olugu, E. U. and Wong, Kuan Yew and Mohamed Shaharoun, Awaluddin (2011) Development of key performance measures for the automobile green supply chain. Resources, Conservation and Recycling, 55 (6). pp. 567-579. ISSN 0921-3449

Olugu, Ezutah Udoncy and Kuan, Yew Wong (2011) A study on the validation of green supply chain performance measures in the automotive industry. IBIMA Communications, 2011 (2011). pp. 1-14. ISSN 1943-7765

Omar, (2012) Effects of different angulation placement of mini-implant in orthodontic. Applied Mechanics And Materials, 121-12 . pp. 1214-1219. ISSN 1660-9336

Omar, Zamri and Mailah, Musa (2003) A preliminary study into the application of active force control strategy to an automotive suspension system. Jurnal Mekanikal (15). pp. 42-57. ISSN 0127-3396

Omar Yaakob, (2014) Design verification of heat exchanger for ballast water treatment. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 61-65. ISSN 0127-9696

Omar Yaakob, (2014) Field measurement of fishing boats generated waves. Jurnal Teknologi (Sciences and Engineering), 66 (2). pp. 183-188. ISSN 0127-9696

Omar Yaakob, (2014) A review of developments in ballast water management. Environmental Reviews, 22 (3). pp. 298-310. ISSN 1181-8700

Omar Yaakob, (2014) A review on micro hydro gravitational vortex power and turbine systems. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 1-7. ISSN 0127-9696

Ong, L. K. and Kien, Q. K. and Wong, King Jye (2011) Effect of fibre orientation on the scratch characteristics of E-glass fibre-reinforced polyester composite. Recent Patents on Materials Science, 4 (1). pp. 56-62. ISSN 1874-4648

Onn, Irwan Herman and Ahmad, Norhayati and Tamin, Mohd. Nasir (2015) Fatigue characteristics of dual-phase steel sheets. Journal of Mechanical Science and Technology, 29 (1). pp. 51-57. ISSN 1738-494X

Ooi, Chia Yee (2013) Study on test compaction in high-level Automatic Test Pattern Generation (ATPG) platform. Circuits and Systems, 4 (4). pp. 342-349. ISSN 2153-1293

Oschner, Andreas and Hosseini, S. M. H. and Belova, Irina V. and Murch, Graeme E. (2009) A refined finite element analysis on the thermal conductivity of perforated hollow sphere structures. Computational Materials Science, 47 (2). pp. 314-319. ISSN 9270256

Oschner, Andreas and Nechaev, Yu S. and Alexeeva, O. K. (2009) Analytical review on the hydrogen multilayer intercalation in carbonaceous nanostructures : relevance for development of super-adsorbents for m fuel-cell-powered vehicles. Journal of Nanoscience and Nanotechnology, 9 (6). pp. 3949-3958. ISSN 15334880

Osman, Kahar and Al Khaireed, S. M. N. and Ariffin, Mohd Kamal and Senawi, Mohd Yusoff (2008) Dynamic modeling of stratification for chilled water storage tank. Energy Conversion and Management , 49 (11). 3270-3273 . ISSN 0196-8904

Osman, Shahrul Azmir and Che Sidik, Nor Azwadi (2009) UTOPIA finite different lattice boltzmann method for simulation natural convection heat transfer from a heated concentric annulus cylinder. European Journal of Scientific Research, 38 (1). pp. 63-71. ISSN 1450-216X

Osman , Kahar (2013) Orthogonal curvilinear grid and spectral expansions for the solution of navier-stokes equation. Indo-American Journal of Mechanical Engineering, 1 (1). n/a. ISSN 2321-9416

Osman K., (2012) System identification model for an intelligent pneumatic actuator (IPA) system. IEEE International Conference on Intelligent Robots and Systems . pp. 628-633. ISSN 2153-0858

Othman, Mohd Fauzi and Othman, Siti Marhainis (2006) Fuzzy logic control for non linear car air conditioning. Elektrika, 8 (2). pp. 38-47. ISSN 0128-4428

Ourdjini, A. and Chew, K. C. and Khoo, B. T. (2001) Settling of silicon carbide particles in cast metal matrix composites. Journal of Materials Processing Technology, 116 . pp. 72-76. ISSN 0924-0136

Padzillah, M. H. and Rajoo, Srithar and Martinez-Botas, R. F. (2015) Experimental and numerical investigation on flow angle characteristics of an automotive mixed flow turbocharger turbine. Jurnal Teknologi, 77 (8). pp. 7-12. ISSN 2180-3722

Padzillah, Muhamad Hasbullah and Rajoo, Srithar and Mingyang, Yang and Martines-Botas, Ricardo (2015) Influence of pulsating flow frequencies towards the flow angle distributions of an automotive turbocharger mixed-flow turbine. Energy Conversion and Management, 98 (1). pp. 449-462. ISSN 0196-8904

Pakharuddin Mohd Samin, (2011) Semi-active suspention control to improve ride and handling using magnetorheological (Mr) damper. International Journal Engineering Systems modeling and Simulation, 1755-9 (3).

Paramasivam, Kishokanna and Mohamed, Danial and Romagnoli, Alesssandro and Rajoo, Sritha and Mohd. Noor, Alias (2015) Aeroacoustics characterization methodology applicable to turbocharger compressor. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7773-7779. ISSN 1819-1894

Paramasivam, Kishokanna and Rajoo, S. and Romagnoli, Alessandro (2015) Suppression of tonal noise in a centrifugal fan using guide vanes. Journal of Sound and Vibration, 357 . pp. 95-106. ISSN 0022-460X

Pesetskaya, Ekaterina and Fiedler, Thomas and Öchsner, Andreas (2007) Two different approaches for the effective conductivity investigation of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 . pp. 118-123. ISSN 1662-9752

Pesetskaya, Ekaterina and Öchsner, Andreas and Rogosin, Sergei The effective conductivity of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 (1). pp. 112-117.

Phen, Chiak See and Wong, Kuan Yew (2008) Application of ant colony optimisation algorithms in solving facility layout problems formulated as quadratic assignment problems: a review. International Journal of Industrial and Systems Engineering , 3 (6). pp. 644-672. ISSN 1748-5037

Phen, Chiak See and Wong, Kuan Yew (2008) Using statistical Design of Experiment to decide the effective parameter values for a new hybrid ant colony algorithm. International Journal of Applied Decision Sciences, 1 (3). pp. 282-304. ISSN 1755-8077

Pitowarno, E. and Mailah, Musa (2007) Control of mobile manipulator using resolved acceleration with iterative-learning-proportional-integral active force control. International Review of Mechanical Engineering, 1 (5). pp. 549-558.

Poh, Ping Em and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2010) Automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Advanced Mechatronic Systems, 2 (5/6). pp. 350-368. ISSN 1756-8412 (Print); 1756-8420 (Electronic)

Prawoto, Yunan (2009) Designing steel microstructure based on fracture mechanics approach. Materials Science and Engineering: A, 507 (1-2). pp. 74-86. ISSN 09215093

Prawoto, Yunan (2010) Quantitative failure analysis using a simple finite element approach. Journal of Failure Analysis and Prevention, 10 (1). pp. 8-10. ISSN 1547-7029

Prawoto, Yunan and Alias, Amran (2015) Stress intensity factor and plastic zone of auxetic materials: a fracture mechanics approach to a chiral structure having negative poissons ratio. Mechanics of Advanced Materials and Structures, 22 (3). pp. 213-223. ISSN 1537-6494

Prawoto, Yunan and Djuansjah, J. R. P. and Shaffiar, N. B. (2012) Re-visiting the 'rule of mixture' used in materials with multiple constituting phases: a technical note on morphological considerations in austenite case study. Computational Materials Science, 65 . pp. 528-535. ISSN 0927-0256

Prawoto, Yunan and Idris, Roslinda and Kamsah, Nazri and Tamin, Nasir (2009) Two-dimensional modeling to compute plastic zone in front of compact tension sample of a multiphase material. Computational Materials Science, 47 (2). 482 -490. ISSN 0927-0256

Prawoto, Yunan and Jern, Phye Tan and Choon, Yong Loh (2010) Effect of microstructures and material compositions on blister formation. Materials Sciences and Applications, 1 (3). pp. 158-161. ISSN 2153-117X (Print); 2153-1188 (Electronic)

Prawoto, Yunan and Kamsah, Nazri and Ahmad, Zaini (2012) Exploring the potential use of adhesion strength for coating analysis. International Journal of Applied Physics and Mathematics, 2 (2). pp. 67-72. ISSN 2010-362X

Prawoto, Yunan and Kamsah, Nazri and Tamin, Mohd. Nasir (2011) Three-dimensional modeling to compute plastic zone in front of crack in compact tension sample of multiphase material. Computational Materials Science, 50 (4). pp. 1499-1503. ISSN 0927-0256

Prawoto, Yunan and Onn, Irwan H. (2012) Application of J-integral concept on blister coating problem. Engineering Fracture Mechanics, 92 . pp. 114-125. ISSN 0013-7944

Prawoto, Yunan and Sumeru, K. and Wan Nik, W. B. (2010) Stress corrosion cracking of steel and aluminum in sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 . pp. 1-8.

Prawoto, Yunan and Sumeru, K. and Wan Nik, W. B. (2012) Stress corrosion cracking of steel and aluminumin sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 . pp. 1-8. ISSN 1687-6822

Prayetno, E. and Jaswar, Jaswar and Koto, Koto and Abd. Kader, Ab. Saman (2013) Feasibility study of WinInGround (WIG) for rescue operation in Kepulauan Riau. Journal of Ocean, Mechanical and Aerospace -Science and Engineering-, 1 . pp. 12-17. ISSN 2354-7065

Priyandoko, Gigih and Mailah, Musa and Jamaluddin, H. (2009) Vehicle active suspension system using skyhook adaptive neuro active force control. Mechanical Systems and Signal Processing, 23 (3). pp. 855-868. ISSN 0888-3270

Priyanto, Agoes and Erwandi, Erwandi and Samudro, Samudro (2008) Surge forces of a FPSO at lee side of submerged plate in regular waves. Jurnal Mekanikal (26). pp. 63-75. ISSN 0127-3396

Priyanto, Eko and Maimun, A. and Noverdo, S. and Saeed, J. and Faizal, A. and Waqiyuddin, M. (2012) A study on estimation of propulsive power for wing in ground effect (WIG) craft to take-off. Jurnal Teknologi, 59 . pp. 43-51. ISSN 2231-7376

Purniawan, A. and Hamzah, Esah and Mohd Toff, Mohd Radzi (2008) Surface roughness and morphology analysis using an atomic force microscopy of polycrystalline diamond coated Si3N4 deposited by microwave plasma assisted chemical vapor deposition. Diffusion and Defect Data Pt.B: Solid State Phenomena, 136 . pp. 153-160. ISSN 1012-0394

Quek, Eng Eng and Mohd. Yusof, Sha'ri (2003) A survey of TQM practices in the Malaysian electrical and electronic industry. Total Quality Management, 14 (1). pp. 63-77. ISSN 1478-3363

R, Ahmad and H. , Jamaluddin and M.A, Hussain (2004) Model structure selection for a discrete-time non-linear system using a genetic algorithm. Journal of Systems and Control Engineering, 218 (12). pp. 85-98. ISSN 0959-6518

Rafiqul Islam, M. and Yaakob, Omar and Adi, Maimun and M., Yusof (2010) Computer simulation of current forces on motion of FPSO in irregular waves. Scientia Iranica (International Journal of Science and Technology), 17 (1). pp. 53-60. ISSN

Rafiu O. Yusof, (2012) Methane emission by sectors: a comprehensive review of emission sources and mitigation methods. Revewable and Sustainable Energy Reviews, 16 . pp. 5059-5070. ISSN 1364-0321

Rahim, E. A. and Shariff, Safian (2007) Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6AI-4V. International Journal Precision Technology, 1 (1). pp. 30-39. ISSN 1755-2079 (Online) : 1755-2060 (Print)

Rahim, Erween A. and Sharif, Safian (2009) Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V. International Journal of Manufacturing Technology and Management, 17 (4). p. 327. ISSN 1368-2148

Rahim, Muhammad Roslan and Mohd. Ja’afar, Mohammad Nazri (2015) Kesan sudut pusaran terhadap pembakaran menggunakan pemusar jejarian dwi aliran. Jurnal Teknologi, 77 (8). pp. 37-45. ISSN 2180-3722

Rahim H.A., (2011) Review of mass flow rate measurement methods in pneumatic conveyor. Jurnal Teknologi (Sciences and Engineering), 55 (2). pp. 49-61. ISSN 0127-9696

Rahimuddin, Rahimuddin and Maimun, Adi and Abdul Ghani, Pauzi and Priyanto, Agoes and Muhammad, Andi Haris (2012) Nonlinear response of SemiSWATH ship, bow-diving, and fin stabilizer effect in following seas. International Journal of Engineering & Technology IJET-IJENS, 12 (2). pp. 38-47. ISSN 2077-1185

Rahmandoust, Moones and Öchsner, Andreas (2009) Influence of structural imperfections and doping on the mechanical properties of single-walled carbon nanotubes. Journal of Nano Research, 6 . 185 -196. ISSN 1662-5250

Rahmat, Mohd. Fua'ad and Omar, Rosli and Jamaluddin, Hishamuddin (2002) A graphical user interface application for continuous-time identification of dynamical system. Jurnal Teknologi D (36D). pp. 1-22. ISSN 0127-9696

Rahmat M.F., (2011) Review on modeling and controller design in pneumatic actuator control system. International Journal on Smart Sensing and Intelligent Systems, 4 (4). pp. 630-661. ISSN 1178-5608

Raja Ahsan Shah, Raja Mazuir and Jones, R. P. and Pawar, J. S. (2012) System modelling and analysis of the driveability response of 4WD vehicle. International Review of Mechanical Engineering, 6 (3). pp. 595-601. ISSN 1970-8734

Raja Hamzah, R. and M. B. A., D. (2009) The influence of operating condition on acoustic emission (AE) generation during meshing of helical and spur gear. Tribology International, 42 (1). pp. 3-14. ISSN 0301679X

Raja Hamzah, Raja Ishak and Al-Balushi, Khamis R. and Mba, David U. (2008) Observations of acoustic emission under conditions of varying specific film thickness for meshing spur and helical gears. Journal of Tribology, 130 (2). pp. 1-12. ISSN 0742-4787

Raja Hamzah, Raja Ishak and Mba , D. (2008) Acoustic emission and specific film thickness (lambda) for spur gears. Insight , 50 . pp. 642-643. ISSN 1354-2575

Raja Hamzah, R. I. and Mba, D. (2007) Acoustic Emission and Specific Film Thickness for Operating Spur Gears. Journal of Tribology , 129 (4). pp. 860-867. ISSN 0742-4787

Raja Ishak Raja Hamzah, (2014) Comparison of acoustic characteristics of date palm fibre and oil palm fibre. Research Journal of Applied Sciences, Engineering and Technology, 7 (8). pp. 1656-1661. ISSN 2040-7459

Rajo Mantari, Muhammad Hanafi Asril and Mohd Jaafar , Mohammad Nazri (2009) Performance of oil burner system utilizingvarious palm biodiesel blends. International Journal of Mechanical and Materials Engineering, 4 (3). pp. 273-278. ISSN 1823-0334

Rajoo, Srithar and Botas, Ricardo Martinez (2008) Variable geometry mixed flow turbine for turbochargers: an experimental study. International Journal of Fluid Machinery and Systems, 1 (1). pp. 155-168. ISSN 1882-9554 online

Rajoo, S. and Martinez-Botas, R. F. (2010) Unsteady effect in a nozzled turbocharger turbine. Journal of Turbomachinery, 132 (3). 001-009. ISSN 0889-504X

Rajoo, Srithar and Martinez-Botas, R. F. and Romagnoli, A. (2011) Steady state performance evaluation of variable geometry twin-entry turbine. International Journal of Heat and Fluid Flow, 32 (2). pp. 477-489. ISSN 0142-727X

Rajoo, Srithar and Martinez-Botas, Ricardo (2008) Mixed flow turbine research: a review. Journal of Turbomachinery, 130 (4). 044001-044012. ISSN 0889-504X

Ramli, N. and Mansor, S. and Jamaluddin, H. and Faris, W. F. (2007) Identification of aerodynamic coefficients of ground vehicles using neural network. IEEE Intelligent Vehicles Symposium, Proceedings . pp. 50-55.

Ramli Mat Mahadhir Mohamed Anwar Johari, (2011) Methane conversion to higher hydrocarbons over copper loaded BZSM-5 in the presence of oxygen. International Journal of Oil, Gas and Coal Technology, 1753-3 .

Rashid, Roslina and Jamaluddin, Hishamuddin and Saidina Amin, Nor Aishah (2006) Empirical and feed forward neural networks models of tapioca starch hydrolysis. Applied Artificial Intelligence, 20 (1). pp. 79-97. ISSN 0883-9514

Rasid, Zainudin A. and Mazlan, Saiful Amri and Ayob, Amran and Zahari, Rizal and Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2012) The strain energy tuning of the shape memory alloy on the post-buckling of composite plates using finite element method. Advanced Materials Research, 445 . pp. 577-582. ISSN 1662-8985

Rasul, Mohamad Sattar and Ismail, Mohd. Yusof and Ismail, Napsiah and Rajuddin, Muhammad Rashid and Abd. Rauf, Rose Amnah (2010) Development of employability skills assessment tool for manufacturing industry. Jurnal Mekanikal : An International Journal (30). pp. 48-61. ISSN 0127-3396

Raupeeh, N. N. and Mohd. Jaafar, Mohammad Nazri and Arizal, M. A. A. and Ishak, M. S. A. (2011) Development of gas turbine spray test rig for biofuel. International Review of Mechanical Engineering, 5 (1). pp. 106-112. ISSN 1970-8734

Razavykia, Abbas and Farahany, Saeed and Mohd. Yusof, Noordin (2015) Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach. Measurement: Journal of the International Measurement Confederation, 76 . pp. 170-182. ISSN 0263-2241

Ridhwan, J. and Hamzah, Esah and Effendy, H. and Selamat, M. Z. and Zulfattah, Z. (2013) Effect of cooling rate on the microstructures and hardness of FeNiCr superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180-1053

Romagnoli A., (2012) Comparison between the steady performance of double-entry and twin-entry turbocharger turbines. Journal of Turbomachinery, 135 (1). ISSN 0889-504X

Rosdzimin,  A. R. M. and Zuhairi, S. M. and Che Sidik, Nor Azwadi (2010) Simulation of mixed convection heat transfer using lattice boltzmann method. International Journal of Automotive & Mechanical Engineering, 2 . pp. 130-143. ISSN 1985-9325 (Print); 2180-1606 (Online)

Roslan Abdul Rahman, (2014) Acoustic emission signal analysis and artificial intelligence techniques in machine condition monitoring and fault diagnosis: a review. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 121-126. ISSN 2180-3722

Roslan Abdul Rahman, (2014) Measurement of noise inside the compartment and vibration on both sides of elastomeric powertrain mounts of passenger car. Noise, Vibration and Comfort, 471 . pp. 59-63. ISSN 1660-9336

Roslan Abdul Rahman, (2014) Measurement of vibration power flow through elastomeric powertrain mounts in passenger car. Noise, Vibration and Comfort, 471 . pp. 30-34. ISSN 1660-9336

Roslan Abdul Rahman, (2014) Optimization of heavy duty truck chassis design by considering torsional stiffness and mass of the structure. Applied Mechanics and Materials, 554 . pp. 459-463. ISSN 1660-9336

Roslan Abdul Rahman, (2014) Prediction head acceleration from hand and seat vibration via artificial neural network model. NOISE, VIBRATION AND COMFORT, 471 . pp. 161-166. ISSN 1660-9336

Rosmin, Norzanah and Hassan, Mohammad Yusri and Sidik, Muhammad Abu Bakar and Abdul Manaf, Muhammad Safwan (2012) Tidal energy generation using the double-emptying system scheme. Perintis E-Journal (Journal Persatuan Saintis Muslim Malaysia), 2 (2). pp. 1-12. ISSN 2232-0725

Roudsari, Arousha Haghighian and Wong, Kuan Yew (2014) A bi-objective stochastic single facility location model for a supermarket. International Journal of Services and Operations Management, 17 (3). pp. 257-279. ISSN 1744-2370

Roya Kohandel, (2012) Optimization of cold-formed channel sections using imperialist competitive algorithm. Applied Mechanics and Materials, 166-16 . pp. 493-496. ISSN 1660-9336

Rozaimi Ghazali, (2011) Perfect tracking control with discrete time LQR for a non-minimum phase electro-hydraulic actuator system. International Journal on Smart Sensing and Intelligent Systems, 4 (3). pp. 424-439. ISSN 1178-5608

Rozaimi Ghazali, (2011) Self tuning control of an electro-hydraulic actuator system. International Journal on Smart Sensing and Intelligent Systems, 4 (2). pp. 189-204. ISSN 1178-5608

Rozaimi Mohd. Saad, (2013) Optimization of the plastic injection molding parameters for sport equipment by using design of experiment. International Review of Mechanical Engineering, 7 (3). pp. 453-462. ISSN 1970-8734

Rozaini, Ahmad Humaizi and Ishak, Mohd Razmi and Quettier, Nicolas and Abu Bakar, Abd Rahim and Mohd Zain, Zarhamdy (2014) Performance of an electro-mechanical parking brake (EMPB) system. 4TH MECHNICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 465-46 . pp. 1267-1271. ISSN 1660-9336

S., Alexandrov and Yusof, Mustafa (2012) A three dimensional limit load solution for highly undermatched single edge cracked specimens in pure bending. Fatigue and Fracture of Engineering Materials and Structures, 36 (5). pp. 375-381. ISSN 8756-758X

S., Mansor and M., Passmore (2010) Measurement of a bluff body aerodynamic yaw moment magnification and damping using a dynamic wind tunnel facility. ACME Journal of Applied Mechanics, 78 (3). 001-006. ISSN 0021-8936

S. , Kamitani and K. , Nakanisi and S., Syahrullail (2008) Improvement of surface roughness of aluminum products by the micro-grooves on tool surface in cold extrusion. Keikinzoku/Journal of Japan Institute of Light Metals, 58 . pp. 111-116. ISSN 0451-5994

S. Aly, Hossam and M. Saqr, Khalid and A. Eldrainy, Yehia and Jaafar, Mohammad Nazri (2009) Can large eddy simulation (LES) predict laminar to turbulent flow transition? International Journal of Mechanical and Materials Engineering, 4 (1). pp. 42-48. ISSN 1823-0334

S., Izman and V. C., Venkatesh (2007) Gelling of chips during vertical surface diamond grinding of BK7 glass. Journal of Materials Processing Technology, 185 . pp. 178-183. ISSN 0924-0136

Saad, Mohd. S. and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2012) Iterative algorithm for active vibration control of flexible beam. International Review of Mechanical Engineering, 6 (1). pp. 61-73. ISSN 1970-8734

Saad, Mohd. Sazli and Jamaluddin, Hishamuddin and Darus, Intan Zaurah Mat (2015) Active vibration control of a flexible beam using system identification and controller tuning by evolutionary algorithm. Journal of Vibration and Control, 21 (10). pp. 2027-2042. ISSN 1077-5463

Sabzehmeidani, Y. and Mailah, Musa and Hussein, Mohamed (2011) Modelling and control of a piezo actuated micro robot with active force control capability for in-pipe application. International Journal of Modelling, Identification and Control, 13 (4). pp. 301-309. ISSN 1746-6172

Sabzehmeidani, Y. and Hussein, M. and Mailah, Musa and Mohd. Zain, Mohd. Zarhamdy and Abdullah, M. R. (2011) Intelligent hybrid control of piezoelectric actuated micro robot. International Journal of Systems Applications, Engineering & Development, 3 (5). pp. 306-313. ISSN 2074-1308

Sadiq Aliyu, Abubakar and Abdul Aziz, Azhar and Yahya, Adibah and Abdul Lattiff, Zulkanain (2015) Potential of oil palm frond liquid extract and fiber as feedstock for bio-butanol production. Jurnal Teknologi, 74 (10). pp. 63-67. ISSN 0127-9696

Safari, Habib and Sharif, Safian and Izman, S. and Jafari, Hassan (2015) Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy. International Journal of Advanced Manufacturing Technology, 78 (1-4). pp. 651-657. ISSN 0268-3768

Safdari A., (2012) Simulation of mixed convection around a square by using LBM. Applied Mechanics and Materials, 229-23 . pp. 2145-2149. ISSN 1660-9336

Safian Sharif, (2014) Cutting force and surface roughness characterization in cryogenic high-speed end milling of Ti-6Al-4V ELI. Materials and Manufacturing Processes, 29 (3). pp. 350-356. ISSN 1532-2475

Safian Sharif, (2014) Effect of cutting parameters on surface roughness in turning of bone. Advanced Materials Research, 845 . pp. 708-712. ISSN 1022-6680

Safian Sharif, (2014) Effect of drill point angle on surface integrity when drilling titanium alloy. Advanced Materials Research, 845 . pp. 966-970. ISSN 1022-6680

Safian Sharif, (2014) Effect of high speed dry end milling on surface roughness and cutting forces of Ti-6Al-4V ELI. Applied Mechanics and Materials, 493 . pp. 546-551. ISSN 1660-9336

Safian Sharif, (2014) Effect of tool path strategies in pocket milling of aluminium epoxy. Advanced Materials Research, 903 . pp. 15-20. ISSN 1022-6680

Safian Sharif, (2014) Effects of cutting parameters on hole integrity when drilling GFRP and HFRP composites. Advanced Materials Research, 845 . pp. 960-965. ISSN 1022-6680

Safian Sharif, (2014) Effects of drilling generated heat on damage factor in GFRP. Key Engineering Materials, 594-59 . pp. 661-665. ISSN 1013-9826

Safian Sharif, (2014) Effects of twist drill point angle on thrust force and delamination factor in hybrid fiber composites drilling. Applied Mechanics and Materials, 564 . pp. 501-506. ISSN 1660-9336

Safian Sharif, (2014) Evaluate of the effects of drilling with varying spindle speed using different thickness of GFRP on the damage factor. MATEC Web of Conferences, 13 . ISSN 2261-236X

Safian Sharif, (2014) Examining the effect of various vegetable oil-based cutting fluids on surface integrity in drilling steel - a review. Advanced Materials Research, 845 . pp. 809-813. ISSN 1022-6680

Safian Sharif, (2014) Experiment investigation of hole accuracy and surface roughness in femur bone drilling using different parameters. Advanced Materials Research, 845 . pp. 720-723. ISSN 1022-6680

Safian Sharif, (2014) Influence of cutting conditions on surface and sub-surface quality of high speed dry end milling Ti-6Al-4V. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 131-136. ISSN 2180-3722

Safian Sharif, (2014) Minimizing drilling thrust force for HFRP composite by optimizing process parameters using combination of ANOVA Approach and S/N ratios analysis. MATEC Web of Conferences, 13 . ISSN 2261-236X

Safian Sharif, (2014) Performance evaluation of carbide tools in drilling CFRP-Al stacks. JOURNAL OF COMPOSITE MATERIALS, 48 (17). pp. 2071-2084. ISSN 0021-9983

Safian Sharif, (2014) Potential of conformal cooling channels in rapid heat cycle molding: a review. Advances in Polymer Technology, 33 (1). ISSN 0730-6679

Said, N. H. and Ani, Farid Nasir and Muhammad Said, Mohd. Farid (2015) Review of the production of biodiesel from waste cooking oil using solid catalysts. Journal of Mechanical Engineering and Sciences, 8 . pp. 1302-1311. ISSN 2289-4659

Saiful Anuar Abu Bakar, (2014) Modelling and validation of vehicle ride comfort model. Applied Mechanics and Materials, 554 . pp. 515-519. ISSN 1660-9336

Salehun, Md Amirul Khair and Md. Tap, Masine and Mohamed Shaharoun, Awaluddin (2005) Guideline for improving capacity of a job shop based on selected performance measures. Jurnal Teknologi A (43A). pp. 87-104. ISSN 0127-9696

Salim, M. A. and Md. Zain, M. Z. and Abu-Bakar, A. R. and Noordin, A. (2009) Simulation of an input shaping scheme technique to investigate unwanted noise and vibration in wiper blade. Journal of Mechanical Engineering and Technology, 1 (1). pp. 1-13. ISSN 2180-1053

Salleh, Z. and Mazlan, E. M. and Mazlan, Saiful Amri and Hassan, N. A. and Patakor, F. A. (2011) A case study on the efficacy of technical laboratory safety in polytechnic. Proceedings of World Academy of Science, Engineering and Technology (53). pp. 760-764. ISSN 2010-376X

Salman, B. H. and A Mohammed, Hussein and Munisamy, K. M. and Sh Kherbeet, A. (2013) Characteristics of heat transfer and fluid flow in microtube and microchannel using conventional fluids and nanofluids: a review. Renewable and Sustainable Energy Reviews, 28 . pp. 848-880. ISSN 1364-0321

Samion, Syahrullail and A., Norhayati and S., Maizan and H. M., Zin and J. Y., Wira and W. B., Wan Nik (2012) The influence of lubricant viscosity in cold work forward extrusion using micro-pits tool. Jurnal Teknologi, 58 (2). pp. 89-93. ISSN 2231-7376

Samion, Syahrullail and Bahak, Mohd. Zubil and Che Sidek, Nor Azwadi (2010) Experimental evaluation of palm oil as lubricant in cold forward extrusion process. International Journal of Mechanical Sciences, 53 (7). pp. 549-555. ISSN 0020-7403

Samion, Syahrullail and Che Sidek, Nor Azwadi and Tiong, Chiong Ing (2011) The metal flow evaluation of billet extruded with RBD palm stearin. International Review of Mechanical Engineering, 5 (1). pp. 21-27.

Samion, Syahrullail and Che Sidik, Nor Azwadi and Abdul Kadir, Mohammed Rafiq and Shafie, N. E. A. (2011) The effect of tool surface roughness in cold work extrusion. Journal of Applied Sciences, 11 (2). pp. 367-372. ISSN 1812-5654

Samion, Syahrullail and Che Sidik, Nor Azwadi and M. J. M, Ridzuan and W. B., Seah (2009) The effect of lubricant viscosity in cold forward plane strain extrusion test. European Journal of Scientific Research, 38 (4). pp. 545-555. ISSN 1450-216X

Samion, Syahrullail and Che Sidik, Nor Azwadi and Osman, Shahrul Azmir (2010) Lattice boltzmann simulation of plume behavior from an eccentric annulus cylinder. International Journal of Mechanical and Materials Engineering, 5 (2). 129 - 135. ISSN 1823-0334

Samion, Syahrullail and Kamitani, S. and Nakanishi, K. (2010) Experimental evaluation of RBD palm olein as lubricant in cold metal forming. Jurnal Mekanikal (31). pp. 1-10. ISSN 0127-3396

Samiran, Nor Afzanizam and Mohd. Jaafar, Mohammad Nazri and Chong, Cheng Tung and Ng, Jo Han (2015) A review of palm oil biomass as a feedstock for syngas fuel technology. Jurnal Teknologi, 72 (5). pp. 13-18. ISSN 0127-9696

Sapari, Nasiman and Idris, Azni and Ab. Hamid, Noor Hisham (1996) Total removal of heavy metal from mixed plating rinse wastewater. Desalination, 106 (1-3). pp. 419-422. ISSN 00119164

Sapawe, N. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Shah, M. I. A. and Jusoh, R. and Salleh, N. F. M. and Hameed, B. H. and Karim, A. H. (2013) Cost–effective microwave rapid synthesis of zeolite NaA for removal of methylene blue. Chemical Engineering Journal, 229 . pp. 388-398. ISSN 1385-8947

Saqr, Khalid M. and ElDrainy, Yehia A. and Musa, Md. Nor (2008) 3-D numerical study of the effect of fin discontinuity on heat transfer augmentation in pipes having internal longitudinal fins for turbulent compressible flow. Proceedings of the 1st International Meeting on Advances in Thermofluids . pp. 195-206. ISSN ISBN 978-983-9805-62-8

Saqr, Khalid M. and Musa, Md. Nor (2009) Critical review of thermoelectrics in modern power generation applications. Thermal Science, 13 (3). 165 -174. ISSN 0354-9836

Saqr, Khalid M. and Musa, Md. Nor (2008) On the deployment of thermoelectric waste heat recovery in the Malaysian road transport sector. Proceedings of the 1st International Meeting on Advances in Thermofluids . pp. 234-241.

Saqr, K. M. and Aly, H. S. and Mohd. Sies, Mohsin and Abd Wahid, Mazlan (2011) Computational and experimental investigations of turbulent asymmetric vortex flames. International Communications in Heat and Mass Transfer, 38 (3). pp. 353-362. ISSN 0735-1933

Saqr, K. M. and Musa, Md. Nor (2011) A perspective of the Malaysian highway energy consumption and future power supply. Energy Policy, 39 (6). pp. 3873-3877. ISSN 0301-4215

Saqr, Khalid M. and Kassema, Hassan I. and Aly, Hossam S. and Wahid, Mazlan Abdul (2012) Computational study of decaying annular vortex flow using the R-epsilon/K-epsilon turbulence model. Applied Mathematical Modelling, 36 (10). pp. 4652-4664. ISSN 0307-904X

Saqr, Khalid M. and Mansour, M. Khamis and Musa, Md. Nor (2008) Thermal design of automobile exhaust based thermoelectric generators : objectives and challenges. International journal of automotive technology, 9 (2). pp. 155-160. ISSN 1229-9138

Saqr, Khalid M. and Musa, Md. Nor (2008) Simulation of a novel hot-side heat exchanger for automobile exhaust based thermoelectric generators using EFDlab. Jurnal Teknos-2K, 8 (1). pp. 17-26. ISSN 1411-4151

Sarip, Shamsul Analysis of temperature and pressure distribution in brake disc for regenerative braking. International Journal of Mechanical Engineering & Technology . (Submitted)

Sarip, Shamsul (2013) Design development of lightweight disc brake for regenerative braking finite element analysis. International Journal of Applied Physics and Mathematics, 3 (1). pp. 52-58. ISSN 2010-362X

Saw, Chun Lin and Abu Bakar, Abd. Rahim and Wan Harujan, Wan Mohd. Musyris and Abd. Ghani, Badri and Jamaluddin, Mohd. Rahimi (2009) Suppressing disc brake squeal through structural modifications. Jurnal Mekanikal (29). pp. 67-83. ISSN 0127-3396

Sawarimuthu, Soosai and Mohd. Jaafar, Mohammad Nazri (2008) Performance of various biofuel blends on burner system. Jurnal Mekanikal (27). pp. 69-77. ISSN 0127-3396

Shabudin Mat, (2014) Development of delta wing aerodynamics research in Universiti Teknologi Malaysia low speed wind tunnel. Advances in Mechanical Engineering . ISSN 1687-8132

Shabudin Mat, (2014) Manufacturing process of blended delta-shaped wing model. Advanced Materials Research, 845 . pp. 971-974. ISSN 1022-6680

Shaffiar, N. M. and Lai, Z. B. and Tamin, Mohd. Nasir (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-46 . pp. 1409-1414. ISSN 1662-9795

Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Experimental study of vortex-induced vibrations of flexibly mounted cylinder in circulating water tunnel. Acta Mechanica, 226 (11). pp. 3795-3806. ISSN 0001-5970

Shahrin Mohammad, (2012) Experimental investigation on wide-span cold-formed steel roof truss system. Applied Mechanics and Materials, 16 . pp. 1304-1307. ISSN 1660-9336

Shamsuddin, S. M. and Ahmed , M. A. and Smian, Y. (2006) NURBS skinning surface for ship hull design based on new parameterization method. International Journal of Advanced Manufacturing Technology, 28 (9 - 10). pp. 936-941. ISSN 0268-3768

Shamsuddin, Shuhana and Sadat Hajmirsadeghi, Reihaneh and Forough, Amir (2012) The impact of physical design factors on the effective use of public squares. International Journal of Fundamental Psychology and Social Sciences, 2 (3). pp. 49-56. ISSN 2231-9484

Shamsuddin, Shuhana and Sulaiman, Ahmad Bashri and Che Amat, Rohayah (2012) Urban landscape factors that influenced the character of George Town, Penang Unesco World Heritage Site. Procedia - Social and Behavioral Sciences, 50 . pp. 238-253. ISSN 1877-0428

Shamsudin, Zainul Rashid and Mohd. Jaafar, Mohammad Nazri (1999) Pembangunan perisian (VORLATTE) menggunakan kaedah kekisi vorteks bagi menentukan ciri aerodinamik sayap sembarangan. Jurnal Mekanikal, 1 (7). pp. 36-55. ISSN 0127-3396

Shamsudin, Supiah and Abdul Rahman, Azmi and Darom, A. R. M. (2011) Determination of detention pond sediment loads using monte carlo simulation, Malaysia. Journal of Environmental Hydrology, 19 . pp. 1-9. ISSN 1058-3912

Sharafatmandjoor, Shervin and Che Sidik, Nor Azwadi and Fathalizadeh, Hamidreza (2015) Imposition of the no-slip boundary condition via modified equilibrium distribution function in Lattice Boltzmann method. International Communications in Heat and Mass Transfer, 62 . pp. 33-36. ISSN 0735-1933

Sharafatmandjoor, Shervin and Taeibi-Rahni, Mohammad and Che Sidik, Nor Azwadi (2015) Formation and breakup patterns of falling droplet. Numerical Heat Transfer Part A: Applications, 68 (9). pp. 1023-1030. ISSN 1040-7782

Sharif, Safian and Abd. Rahim, Erween (2007) Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V. Journal of Materials Processing Technology, 185 (1-3). pp. 72-76. ISSN 09240136

Sharif, Safian and Akhavan Farid, Ali and Idris, Mohd. Hasbullah (2012) Tool life prediction model of uncoated carbide tool in high speed drilling of Al-Si alloy using response surface methodology. International Journal of Surface Science and Engineering, 6 (1-2). pp. 112-121. ISSN 1749-785X

Sharif, Safian and Namazi, Hamidreza and Farid, Ali Akhavan (2009) Effect of machining parameters and cutting edge on surface integrity when driling and hole making in Inconel 718. SAE International Journal of Materials and Manufacturing, 2 (1). pp. 564-569. ISSN 1946-3979

Sharif, Safian and Sudin, Izman and Tan, P. L. (2010) Roughness models for sanded wood surfaces. Wood Science and Technology, 46 . 1 -14. ISSN 0043-7719

Sharifishourabi, Gholamali and Ayob, Amran and Gohari, Soheil and Yahya, Mohd. Yazid and Sharifi, Shokrollah and Vrcelj, Zora (2015) Flexural behavior of functionally graded slender beams with complex cross-section. Journal of Mechanics of Materials and Structures, 10 (1). pp. 1-16. ISSN 1559-3959

Sheikh Salim, Sheikh Ahmad Zaki and Wan Hassan, Mat Nawi (2003) Simulasi aerodinamik kenderaan dengan menggunakan fluent. Jurnal teknikal dan kajian sosial, 1 (2). pp. 9-33. ISSN 1675-2228

Sheldareh, A. A. and Safdari, A. and Pourtousi, M. and Che Sidik, Nor Azwadi (2012) Prediction of particle dynamics in lid-driven cavity flow. International Review on Modelling and Simulations, 5 (3). pp. 1344-1347. ISSN 1974-9821

Shidong, Li and Abdul Hamid, Mohd. F. and Basaran, Cemal (2008) Simulating damage mechanics of electromigration and thermomigration. Simulation: Transactions of The Society for Modelling and Simulation Int., 84 (8-9). pp. 391-401. ISSN 0037-5497

Shirdar, Mostafa Rezazadeh and Nilashi, Mehrbakhsh and Bagherifard, Karamollah and Ibrahim, Othman and Izman, S. and Moradifard, Hossein and Janahmadi, Nasim and Barisamy, Mehdi (2011) Application of ANFIS system in prediction of machining parameters. Journal of Theoretical and Applied Information Technology, 33 (1). pp. 83-93. ISSN 1992-8645

Shirdar, Mostafa Rezazadeh and Sudin, Izman and Taheri, Mohammad Mandi and Keyvanfar, Ali and Mohd. Yusop, Mohd. Zamri and Abdul Kadir, Mohammed Rafiq (2015) A novel hydroxyapatite composite reinforced with titanium nanotubes coated on Co-Cr-based alloy. Vacuum, 122 . pp. 82-89. ISSN 0042-207X

Shuhaimi Mansor, (2014) Flow visualization and measurement of a synthetic jet actuator performance using PIV system. Jurnal Teknologi, 71 (2). pp. 13-17. ISSN 0127-9696

Shuhaimi Mansor, (2014) Hardware in the loop of two rotors platform. Jurnal Teknologi, 71 (2). pp. 7-11. ISSN 0127-9696

Shuhaimi Mansor, (2014) Individual stiffness of 3D space frame thin walled structural joint considering local buckling effect. Applied Mechanics and Materials, 554 . pp. 411-415. ISSN 1660-9336

Sidik, N. A. C. and Horng, N. C. and Mussa, M. and Abdullah, S. (2010) Simulation of rarefied gas flow in slip and transitional regimes by the lattice Boltzmann method. CFD Letters, 2 (2). pp. 66-74. ISSN 2180-1363

Sidik N.A.C., (2011) Prediction of supersonic flow over compression corner. Journal of Applied Sciences, 11 (19). pp. 3397-3404. ISSN 1812-5654

Siow, C. L. and Koto, J. and Yasukawa, H. and Matsuda, A. and Terada, D. and Soares, C. Guedes and Incecik, Atilla and Abd. Ghani, Mohd. Pauzi (2015) Mooring effect on wave frequency response of round shape FPSO. Jurnal Teknologi, 74 (5). pp. 59-68. ISSN 2180-3722

Soo, Say Leong and Ratnam, Mani Maran and Samad, Zahurin and Khalid, Mohd. Ashhar (2007) Automatic label removal from digitized weld radiographs. Jurnal Teknologi D . pp. 1-14. ISSN 0127-9696

Srithar Rajoo, (2014) Assessment of turbocharger turbine unsteady flow modelling methodology on engine performance. ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014, 1 .

Srithar Rajoo, (2014) Combustion performance and emission analysis of diesel engine fuelled with water-in-diesel emulsion fuel made from low-grade diesel fuel. Energy Conversion and Management, 90 . pp. 375-382. ISSN 0196-8904

Srithar Rajoo, (2014) Efforts to establish Malaysian urban drive-cycle for fuel economy analysis. SAE Technical Papers, 1 .

Srithar Rajoo, (2014) Influence of speed and frequency towards the automotive turbocharger turbine performance under pulsating flow conditions. Energy Conversion and Management, 80 . pp. 416-428. ISSN 0196-8904

Srithar Rajoo, (2011) Inlet boundarycondition study for one-dimensional twin-entry turbine modeling. Jurnal Mekanikal, 0127-3 (33). pp. 89-104.

Srithar Rajoo, (2014) Integration of meanline and one-dimensional methods for prediction of pulsating performance of a turbocharger turbine. Energy Conversion and Management, 81 . pp. 270-281. ISSN 0196-8904

Srithar Rajoo, (2014) Investigation of cylinder deactivation and variable valve actuation on gasoline engine performance. SAE Technical Papers, 1 .

Srithar Rajoo, (2014) Novel method to improve engine exhaust energy extraction with active control turbocharger. International Journal of Engine Research, 15 (2). pp. 236-249. ISSN 1468-0874

Suaib, N. M. and Md. Sam, Yahaya (2008) Modeling and control of active suspension using pismic and SMC. Jurnal Mekanikal (26). pp. 119-128. ISSN 0127-3396

Suardi, Khairmen and Hamzah, E. and Ourdjini, A. and Venkatesh, V. C. (2007) Effect of heat treatment on the diffusion coefficient of hydrogen absorption in gamma-titanium aluminide. Journal of Materials Processing Technology, 185 (1-3). pp. 106-112. ISSN 0924-0136

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohammad Nazim and Low, Yik Kuan and Eng, Kean Khor (2010) Effect of pickling process on adhesion strength of ti oxide layer on titanium alloy substrate. Advanced Materials Research, 146-47 . pp. 1621-1630. ISSN 1662-8985

Sudin, Izman and R., Rosliza (2011) SEM-EDS characterization of natural products on corrosion inhibition of Al-Mg-Si alloy. Protection of Metals and Physical Chemistry of Surfaces, 47 (3). pp. 395-401. ISSN 2070-2051

Suhail Kazi, (2014) A hybrid control approach for precise positioning of a piezo-actuated stage. International Conference on Control, Automation and Systems . pp. 667-671. ISSN 1598-7833

Sulaiman, Suditama and Megat Ahmad, Megat Mohamad Hamdan and Sulaiman, Shamsuddin and Adam, Normariah (2005) Heat transfer study in the low temperature thermal energy storage material (multi-component material) between tubes array during melting. Jurnal Mekanikal (19). pp. 71-83. ISSN 0127-3396

Sulaiman, Ahmad Bashri and Ja’afar, Nor Haslina and Shamsuddin, Shuhana (2012) The contribution of landscape features on traditional streets in Malaysia. Procedia - Social and Behavioral Sciences, 50 . pp. 643-656. ISSN 1877-0428

Sulaiman, O. and Abd Kader, Ab Saman and Saharuddin, A. H. and Wan Nik, W. B. and Samo, K. B. (2010) Safety and environmental risk and reliability modeling process for sustainable inland water transportation. Journal of Marine Environmental Engineering , 9 (2). pp. 145-173. ISSN 1061-026X

Sulaiman, O. and Abd. Kader, Abd. Saman and Saharuddin, A. H. (2011) Collision aversion model for inland water transportation : cost benefit analysis model. International Journal of Trade, Economics and Finance, 2 (1). pp. 24-31. ISSN 2010-023X

Sulaiman, O. and Saharuddin, A. H. and Kader, Abd. Saman (2012) Human reliability analysis (HRA) emanating from use of technology for ships navigating within coastal area. African Journal of Business Management, 6 (10). pp. 3602-3612. ISSN 1993-8233

Sulaiman, O. O. and Wan Nik, W. B. and Saharuddin, A. H. and Abd. Kader, Ab. Saman (2012) Study of packing density and temperature on the oil sorption capacity of packed local kapok fiber as bio-oil spill absorbent. Biosciences Biotechnology Research Asia, 9 (1). pp. 53-61. ISSN 0973-1245

Sulaiman, O. Olanrewaju and Amagee, A. and Abd. Kader, Ab. Saman (2015) Experimental study of native macro algae species identification for open water farming for biofuel plant energy feed stock. Biosciences Biotechnology Research Asia, 12 . pp. 799-806. ISSN 0973-1245

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaludd, Hishamuddin and Abd. Rahman, Roslan and Burhaumudin, Mohammad Safwan (2012) Groundhook control of semi-active suspension for heavy vehicle. International Journal of Research in Engineering and Technology, 1 (3). pp. 146-152. ISSN 2277-4378

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Tyre Force Control strategy for semi-active magnetorheological damper suspension system for light-heavy duty truck. International Journal of Vehicle Autonomous Systems, 13 (1). pp. 65-90. ISSN 1471-0226

Sulaimon, Shodiya and Abdulaziz, Azhar and Darus, Amer Nordin (2012) Improved refrigerant characteristics flow predictions in adiabatic capillary tube. Research Journal of Applied Sciences, Engineering and Technology, 4 (13). pp. 1922-1927. ISSN 2040-7467

Sulta N., (2011) Study of in vitro degradation of biodegradable polymer based thin films and tissue engineering scaffolds. African Journal of Biotechnology, 10 (81). pp. 18709-18715. ISSN 1684-5315

Sumeru, K. and Nasution, H. and Ani, Farid Nasir (2012) A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4927-4937. ISSN 1364-0321

Supriyo, Bambang and Tawi, Kamarul Baharin and Che Kob, Mohd. Sabri and Mazali, Izhari Izmi (2015) Secondary pulley clamping force controller for electro-mechanical dual acting pulley continuously variable transmission system. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7734-7738. ISSN 1819-6608

Supriyo, Bambang and Tawi, Kamarul Baharin and Jamaluddin, Hishamuddin and Ariyono, Sugeng (2006) Position control for pulley axial movement of electro-mechanical dual acting pulley continuously variable transmission system. Jurnal Mekanikal (22). pp. 89-102. ISSN 0127-3396

Surjosatyo, Adi and Ani, Farid Nasir (2002) Development of a two-stage biomass combustion system for reducing the emission pollutant. Jurnal Teknologi C (36A). pp. 55-68. ISSN 0127-9696

Surjosatyo, Adi and Ani, Farid Nasir (2005) Experimental and prediction of the development of low-calorific swirl burner. International Energy Journal, 6 (2). ISSN 1513-718X

Suroso, Arief (2005) Hydraulic model test of wave energy conversion. Jurnal Mekanikal (19). pp. 84-94. ISSN 0127-3396

Syahrom, Ardiyansyah and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Ochsner, Andreas (2012) Permeability studies of artificial and natural cancellous bone structures. Medical Engineering and Physics, 35 (6). pp. 792-799. ISSN 1350-4533

Syahrullail, Samion and Kamitani, Shunpei and Nakanishi, K. (2009) Investigation of frictional constraint effect of RBD palm stearin as lubricant by plane strain extrusion. European Journal of Scientific Research, 35 (4). 534 -542. ISSN 1450-202X

Syahrullail, Samion and Sidik, C. S. C. and Seah, W. B. (2009) Plasticity analysis of pure aluminium extruded with an RBD palm olein lubricant. Journal of Applied Sciences, 9 (19). 3581 -3586. ISSN 1812-5654

Syahrullail Samion, (2014) Effect of low current for machining pit using electrical discharge machine. Applied Mechanics and Materials, 554 . pp. 180-184. ISSN 1660-9336

Syahrullail Samion, (2012) The effect of temperature on the tribological behavior of RBD palm stearin. Tribology Transactions, 55 (5). pp. 539-548. ISSN 1040-2004

Syahrullail Samion, (2014) Evaluation of paraffinic mineral oil as lubricant in cold work extrusion process. Applied Mechanics and Materials, 554 . pp. 327-331. ISSN 1660-9336

Syahrullail Samion, (2012) Experimental evaluation of refined, bleached, and deodorized palm olein and palm stearin in cold extrusion of aluminum a1050. Tribology Transactions, 55 (2). pp. 199-209. ISSN 1040-2004

Syahrullail Samion, (2014) An experimental investigation of palm pressed fibre waste as lubricant in strip drawing. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 91-98. ISSN 0127-9696

Syahrullail Samion, (2014) Experimental study on the effect of different speed using pin on disc tribotester. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 562-565. ISSN 1660-9336

Syahrullail Samion, (2014) Friction and wear performance of double fractionate palm olein lubricant using pin-on-disk tribometer. Applied Mechanics and Materials, 554 . pp. 396-400. ISSN 1660-9336

Syahrullail Samion, (2014) Influence of normal load and temperature on tribological properties of jatropha oil. Jurnal Teknologi, 71 (2). pp. 145-150. ISSN 0127-9696

Syahrullail Samion, (2014) Investigate Jatropha oil as new source of lubricant oil. 4th Mechanical and Manufacturing Engineering, PTS 1 and 2, 465-46 . pp. 201-205. ISSN 1660-9336

Syahrullail Samion, (2013) Investigation of palm fatty acid distillate as an alternative lubricant of petrochemical based lubricants, tested at various speeds. International Review of Mechanical Engineering, 7 (1). pp. 72-80. ISSN 1970-8734

Syahrullail Samion, (2014) Investigation of palm fatty acid distillate oil as an alternative to petrochemical-based lubricants. Journal of Oil Palm Research, 26 (3). pp. 25-36. ISSN 1511-2780

Syahrullail Samion, (2014) Machining pits on the curvature surface cup using spark process. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 129-132. ISSN 0127-9696

Syed Ahmad Helmi Syed Hassan, (2014) Evaluating ARIMA-neural network hybrid model performance in forecasting stationary timeseries. Advanced Materials Research, 845 . pp. 510-515. ISSN 1022-6680

Syed Ahmad Helmi Syed Hassan, (2014) Improving the efficiency of manufacturing supply chain using system dynamic simulation. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 117-119. ISSN 2180-3722

Syed Ahmad Helmi Syed Hassan, (2014) Improving the inventory levels of a blood supply chain through system dynamic simulation. Jurnal Teknologi (Sciences and Engineering), 69 (6). pp. 1-4. ISSN 0127-9696

Syed Hassan, Syed Ahmad Helmi and Mohd. Yusof, Khariyah and Mohammad, Shahrin and Abu, Mohd. Salleh and Tasir, Zaidatun (2012) Methods to study enhancement of problem solving skills in engineering students through cooperative problem-based learning. Procedia - Social and Behavioral Sciences, 56 . pp. 737-746. ISSN 1877-0428

Taheri, Mohammad Mahdi and Abdul Kadir, Mohammed Rafiq and Shokuhfar, Tolou and Hamlekhan, Azhang and Shirdar, Mostafa Rezazadeh and Naghizadeh, Farnaz (2015) Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: synthesis and application. Materials and Design, 82 . pp. 119-125. ISSN 0264-1275

Tahir, Bashir Ahmed and Ali, Jalil and Abdul Rahman, Rosly (2007) Dependence of dynamic range, linearity and sensitivity of fiber Bragg grating system on bonded sensor length. Optoelectronics And Advanced Materials-Rapid Communications, 1 (1). pp. 19-24. ISSN 1842-6573

Tamin, M N and Liew, Y B (2005) Numerical modeling of cyclic stress-strain behavior Of sn-pb solder joint during thermal fatigue. National Seminar on Computational & Experimental Mechanics (CEM) 2005 . pp. 351-360.

Tamin, M. N. and Ghonem, H. (2000) Fatigue damage mechanisms of bridging fibers in titanium metal matrix composites. Journal of Engineering Materials and Technology, Transactions of the ASME . pp. 370-375. ISSN 0094-4289

Tamin, M. N. and Liew, Y. B. and Wagiman, A. N. R. and Loh, W. K. (2007) Solder joint fatigue in a surface mount assembly subjected to mechanical loading. IEEE Transactions on Components and Packaging Technologies, 30 . pp. 824-829. ISSN 1521-3331

Tamin, M. N. and Sudin, I. and Mon, T. T. (2008) Thermal-mechanical responses of Ti-6Al-4V during orthogonal cutting process. Diffusion and Defect Data. Pt A Defect and Diffusion Forum, 273-276 . pp. 673-678. ISSN 1012-0386

Tan, Jaan Soon and Ani, Farid Nasir (2003) Diffusional behavior and absorption capacity of palm shell chars for oxygen and nitrogen - the effect of carbonization temperature. Carbon, 41 (4). pp. 840-842. ISSN 0008-6223

Tan, Soon Tan and Ani, Farid Nasir (2004) Carbon molecular sieves produced from oil palm shell for air separation. Separation and Purification Technology, 35 (1). pp. 47-54. ISSN 1383-5866

Tang, Howe Hing and Mailah, Musa (2008) Simulator for control of autonomous nonholonomic wheeled mobile robot. Journal of Applied Sciences, 8 (14). pp. 2534-2543. ISSN 1812-5654

Tang, Howe Hing and Mailah, Musa (2006) Motion Control of Nonholonomic Wheeled Mobile Robot in a Structured Layout. Jurnal Mekanikal (21). pp. 27-39. ISSN 0127-3396

Tavakolpour, Alireza Reza and Mat Darus, Intan Zaurah and Mailah, Musa (2009) Numerical simulation of a flexible plate system for vibration control. WSEAS Transactions on Systems and Control, 4 (3). 119 -128. ISSN 1991-8763

Tawi, Kamarul Baharin and Yunus, Rohaizad and Talib@Charlie, Mohamad Husni (2003) Valve train investigation for CNG engine application. Jurnal Mekanikal, 15 . pp. 32-41. ISSN 0127-3396

Teow, Ket Seang and Ismail, Issham and Ismail, Abdul Razak (2000) A study of formation damage at different drilling environments. Proceedings of Malaysian Science and Technology Congress '94 .

Teshnizi S.S., (2012) Mechanical behavior of composite plate under combined impact and internal pressure. Applied Mechanics and Materials, 229-23 . pp. 732-736. ISSN 1660-9336

Tham, Sook Chan and Yusof, Sha’ri M. (2009) Quality improvement using taguchi method in a manufacturing company. Jurnal Mekanikal (28). pp. 44-56. ISSN 0127-3396

Tiong, Chiong Ing and Azli, Yahya and Abdul Kadir, Mohammed Rafiq and Syahrullail, Samion (2012) Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads. Journal of Zhejiang University: Science A, 13 (8). pp. 633-640. ISSN 1673-565X

Toh, C. L. and Idris, Nik Rumzi and Yatim, Abdul Halim and Muhammad, N. D. and Elbuluk, M. E. (2005) Implementation of a New Torque and Flux Controllers for Direct Torque Control (DTC) of Induction Machine Utilizing Digital Signal Processor (DSP) and Field Programmable Gate Arrays (FPGA). The 36th IEEE Conference on Power Electronics Specialists . pp. 1594-1599.

Tok, H. Y. and Hamzah, Esah and Bakhsheshi-Rad, Hamid Reza (2015) The role of bismuth on the microstructure and corrosion behavior of ternary Mg-1.2Ca-xBi alloys for biomedical applications. Journal of Alloys and Compounds, 640 . pp. 335-346. ISSN 9258-388

Tuty Asma Abu Bakar, (2014) Authors' reply to discussion of ''On the Refinement Mechanism of Silicon in Al-Si-Cu-Zn Alloy with Addition of Bismuth''. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 45A (12). pp. 5306-5307. ISSN 1073-5623

Tuty Asma Abu Bakar, (2014) On the refinement mechanism of silicon in Al-Si-Cu-Zn alloy with addition of bismuth. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A (3). pp. 1085-1088. ISSN 1073-5623

Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Nizam, Muhammad Khair and Mazlan, Saiful Amri (2015) Response of a magnetorheological brake under inertial loads. International Journal on Electrical Engineering and Informatics, 7 (2). pp. 308-322. ISSN 2085-6830

Udoncy Olugu, Ezutah and Kuan, Yew Wong and Mohamed Shaharoun, Awaludin (2010) A comprehensive approach in assessing the performance of an automobile closed-loop supply chain. Sustainability, 2 (4). pp. 871-889. ISSN 2071-1050

V. C., Venkatesh and S., Izman and Sharif, S. and T. T., Mon and M., Konneh (2002) Precision micro-machining of silicon and glass. International Conference on Industrial Technology 2002, 2 . pp. 1146-1151.

V. C., Venkatesh and S., Izman (2007) Development of a novel binderless diamond grinding wheel for machining IC chips for failure analysis. Journal of Materials Processing Technology, 185 (1-3). pp. 31-37. ISSN 0924-0136

Vaghefinezhad, Sayedmohammadreza and Wong, Kuan Yew (2012) A genetic algorithm approach for solving a flexible job shop scheduling problem. International Journal of Computer Science Issues, 9 (3). pp. 85-90. ISSN 1694-0814

Vakilipour Takaloo, Ashkan and Hussain, Mohammad Sakhawat and Atabaki, Mehdi Mazar and Vakilipour Takaloo, Shayan and Seung, Ki Joo (2013) Nanocrystalline nickel deposition on the titanium alloys using high solution flow velocity. Journal of Materials Engineering and Performance, 22 (3). pp. 706-712. ISSN 1059-9495 (Print); 1544-1024 (Electronic)

Varatharajoo, R. and Tech Wooi , C. and Mailah, Musa (2011) Attitude pointing enhancement for combined energy and attitude control system. Acta Astronautica, 68 (11-12). pp. 2025-2028. ISSN 0094-5765

Vasisht C., Venkatesh and Sudin, Izman and S.C, Mahadevan (2004) Electro-chemical mechanical polishing of copper and chemical mechanical polishing of glass. Journal of Materials Processing Technology, 149 (1-3). pp. 493-498. ISSN 09240136

Venkatesh, V. C. and Izman, S. and Vichare, P. S. and Mon, T. T. and Murugan, S. (2005) The novel bondless wheel, spherical glass chips and a new method of aspheric generation. Journal of Materials Processing Technology, 167 (2-3). pp. 184-190. ISSN 0924-0136

Venkatesh, Vasisht, C. (2003) Precision manufacture of spherical and aspheric surfaces on plastics, glass, silicon and germanium. Current Sciences, 84 (9). pp. 1211-1219.

Venkatesh, V. C. and Izman, S. and Sharif, S. and Mon, T. T. and Konneh, K. (2003) Ductile Streaks in Precision Grinding of Hard and Brittle Materials. Academy Proceedings in Engineering Sciences, 28 (5). pp. 915-924. ISSN none

Vesenjak, M. and Ren, Z. and Fiedler, T. and Ochsner, A. (2009) Impact behavior of composite hollow sphere structures. Journal of Composite Materials, 43 (22). pp. 2491-2505. ISSN 0021-9983

Vesenjak, Matej and Fiedler, Thomas and Ren, Zoran and Öchsner, Andreas (2008) Behaviour of syntactic and partial hollow sphere structures under dynamic loading. Advanced Engineering Materials , 10 . pp. 185-191. ISSN 1438-1656

Vesenjak, Matej and Krstulovic-Opara, Lovre and Ren, Zoran and Öchsner, Andreas and Domazet, Želiko (2009) Experimental study of open-cell cellular structures with elastic filler material. Experimental Mechanics, 49 (4). 501-509 . ISSN 0014-4851

Vesenjak, Matej and Ren, Zoran and Ochsner, Andreas (2009) Dynamic behaviour of regular closed-cell porous metals - computational study. International Journal of Materials Engineering Innovation, 1 (2). p. 175. ISSN 1757-2754

Vesenjak, Matej and Öchsner, Andreas and Ren, Zoran (2008) Characterization of open-cell cellular material structures with pore fillers. Materials Letters , 62 . pp. 3250-3253. ISSN 0167-577X

Vesenjak, Matej and Öchsner, Andreas and Ren, Zoran (2007) Evaluation of thermal and mechanical filler gas influence on honeycomb structure behavior. Materials Science Forum, 553 . pp. 190-195.

Vesenjak, Matej and Žunic, Zoran and Ren, Zoran and Öchsner, Andreas (2008) Computational study of heat transfer in honeycomb structures accounting for gaseous pore filler. Defect and Diffusion Forum, 273 . 699 -706. ISSN 1012-0386

Vesenjak, M. and Ren, Z. and Ochsner, Andreas (2008) Behaviour of cellular materials under impact loading. Materials Science and Engineering Technology, 39 (2). pp. 125-132. ISSN 0933-5137

Veyhl, Christoph and Winkler, Rolf and Merkel, Markus and Öchsner, Andreas (2008) Mechanical testing of diffusion bonded metallic hollow sphere structure (MHSS). Defect and Diffusion Forum, 280 . pp. 85-96. ISSN 1662-9507

Veyhl, Christoph and Winkler, Rolf and Merkel, Markus and Öchsner, Andreas (2008) Structural characterisation of diffusion-bonded hollow-sphere structures. Defect and Diffusion Forum , 280 . 105 -112. ISSN 1012-0386

Wah, (2012) Decision making framework for earthquake disaster prevention and mitigation. Applied Mechanics And Materials, 105-10 . pp. 330-333. ISSN 1660-9336

Wahab, Yussof and Hamidinezhad, Habib and Othaman, Zulkafli and Sumpono, Imam (2012) Synthesis and analysis of silicon nanowires grown on Si (111) substrate at different silane gas flow rate. Solid State Science and Technology, 20 (1 & 2). pp. 35-40. ISSN 0128-7389

Wahid N., (2011) Application of intelligent controller in feedback control loop for aircraft pitch control. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 1065-1074. ISSN 1991-8178

Wan Ali, Wan Khairuddin and Lim, Chun Kai (2006) Development of antenna positioner. Jurnal Mekanikal (21). pp. 53-64. ISSN 0127-3396

Wan Ali, Wan Khairuddin and Ang, Kiang Long and Mohd. Jaafar, Mohammad Nazri (2015) Experimental solid and liquid propellant rocket development in Universiti Teknologi Malaysia: 1992-2011. Jurnal Teknologi, 73 (1). pp. 35-52. ISSN 2180-3722

Wan Ali, Wan Khairuddin and Nambaraja, Kuberaraaj and Krishnan, Subramaniam (2012) Preparation of rocket grade hydrogen peroxide and catalyst pack for monopropellant rocket thruster. Journal of aerospace Engineering and Technology, 2 (2). pp. 1-8. ISSN 2231-038X

Wan Hamid, Wan Harun and Loh, Chee Hong (2008) Development and implementation of radiofrequency identification (RFID) technology for inventory management system : a case study. Jurnal Mekanikal (27). pp. 51-68. ISSN 0127-3396

Wan Khairuddin Wan Ali, (2014) Observation on solid propellant ignition using high speed camera: the effect of hot wire position on the combustion flame contour. Jurnal Teknologi, 71 (2). pp. 37-41. ISSN 0127-9696

Wan Khairuddin Wan Ali, (2011) Review of application of ceramic in high temperature enviroment. Journal of Aerospace Engineering & Technology, 2231-0 (1). pp. 40-46.

Wan Khairuddin Wan Ali, (2011) The study of burningcharacteristics of Ap/Htpb/Al basic components of a composite propellant. Journal of Aerospace Engineering & Technology, 2231-0 (1). pp. 21-26.

Wan Mohamed, Wan Ahmad Najmi and Ani, Farid Nasir (2002) The effect of fuel feed rate on temperature profiles of a cascading hearth with secondary swirl combustor. Jurnal Mekanikal (13). ISSN 0127-3396

Wan Nazdah Wan Hussin, (2014) Preliminary work towards development of a dynamic job shop scheduling model. Advanced Materials Research, 845 . pp. 682-686. ISSN 1022-6680

Wan Nik, Wan Sani and Ani, Farid Nasir and Hassan, Masjuki (2003) Rheological properties of palm oil and palm-mineral oil blend. Jurnal Mekanikal (16). pp. 107-116. ISSN 0127-3396

Wan Nik, W. B. and Ku Bulat, K. H. and Senin, H. B. and Ali, N. A. and Rahman, M. D. and Ani, F. N. (2007) Study of plant oil and its ageing effect on hydraulic system efficiency and rheological performance. Journal of Applied Sciences, 7 (15). pp. 2120-2125. ISSN 1812-5662

Wan Nik, W. B. and Syahrullail, S. and Rosliza, R. and Rahman, M. M. and Zulkifli, M. F. R. (2012) Corrosion behaviour of aluminium alloy in palm oil methyl ester (B100). Jurnal Teknologi, 58 . pp. 73-76. ISSN 2231-7376

Wan Nik, W.B. and F. N., Ani and H. H., Masjuki (2005) Thermal stability evaluation of palm oil as energy transport media. Energy Conversion and Management, 46 . pp. 2198-2215. ISSN 0196-8904

WanNik, W. B. and Ayob, A. F. and Samion, Syahrullail and Masjuki, H. H. and Ahmad, M. F. (2012) The effect of boron friction modifier on the performance of brake pads. International Journal of Mechanical and Materials Engineering, 7 (1). pp. 31-35. ISSN 1823-0334

Willberg, Christian and Duczek, Sascha and Vivar-Pérez, Juan Miguel and Ahmad, Zair Asrar (2015) Simulation methods for guided wave-based structural health monitoring: a review. Applied Mechanics Reviews, 67 (1). ISSN 0003-6900

Winkler, R. and Merkel, M. and Öchsner, A. (2009) Experimental and numerical analyses of diffusion bonded hollow sphere structures. Materialwissenschaft und Werkstofftechnik, 40 (3). pp. 133-138. ISSN 09335137

Winkler, R. and Merkel, M. and Öchsner, A. and Günter, W. (2008) On the vibration analysis of adhesively bonded hollow sphere structures. Materialwissenschaft und Werkstofftechnik , 39 (2). 139 -142. ISSN 0933-5137

Wiriadidjaja S., (2012) Subsonic wind tunnels in Malaysia: a review. Applied Mechanics and Materials, 225 . pp. 566-571. ISSN 1660-9336

Wong, Kuan Yew and Komarudin, - (2008) Parameter tuning for ant colony optimization: a review. Proceedings of the International Conference on Computer and Communication Engineering 2008 . pp. 542-545.

Wong, Kuan Yew (2005) Critical success factors for implementing knowledge management in small and medium enterprises. Industrial Management & Data Systems, 105 (3). pp. 261-279. ISSN 0263-5577

Wong, Kuan Yew and Aspinwall, Elaine (2006) Development of a knowledge management initiative and system: A case study. Expert System with Applications, 30 (4). pp. 633-641.

Wong, Wai Peng and Wong, Kuan Yew (2008) A review on benchmarking of supply chain performance measures. Benchmarking, 15 (1). pp. 25-51. ISSN 1463-5771

Wong, Wai Peng and Jaruphongsa, Wikrom and Lee, Loo Hay and Wong, Kuan Yew (2007) A preliminary study on using Data Envelopment Analysis (DEA) in measuring supply chain efficiency. International Journal of Applied Systemic Studies , 1 (2). pp. 188-207.

Wong, King Jye and B. F., Yousif and U., Nirmal (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). 4514 -4521. ISSN 0261-3069

Wong, King Jye and Nirmal, Umar and Lim, B. K. (2010) Impact behavior of short and continuous fiber-reinforced polyester composites. Journal of Reinforced Plastics and Composites, 29 (23). pp. 3463-3474. ISSN 0731-6844

Wong, King Jye and Tamin, Mohd. Nasir and Gonga, X. J. and Aivazzadeh, S. (2011) Tensile behaviour of anti-symmetric CFRP composite. Procedia Engineering, 10 . pp. 1865-1870. ISSN 1877-7058

Wong, Kuan Yew and Komarudin, Komarudin (2011) Comparison of techniques for dealing with empty spaces in unequal area facility layout problems. International Journal of Industrial and Systems Engineering, 6 (3). 289 - 300. ISSN 1748-5037

Wong, Kuan Yew and Komarudin, Komarudin (2012) Parameter tuning of ant system using fuzzy logic controller. International Journal of Operational Research, 15 (2). pp. 125-135. ISSN 1745-7645

Wong, Kuan Yew and Kuah, C. T. (2011) Efficiency assessment of universities through data envelopment analysis. Procedia Computer Science, 3 . pp. 499-506. ISSN 1877-0509

Wong, Kuan Yew and Tan, Li Pin and Lee, Cheng Sheng and Wong, Wai Peng (2015) Knowledge management performance measurement: measures, approaches, trends and future directions. Information Development, 31 (3). pp. 239-257. ISSN 0266-6669

Wong, Wai Hing and Mohd. Ghazali, Normah (2007) Numerical Simulation Of A Microchannel For Microelectronic Cooling. Jurnal Teknologi , 46 (A). pp. 1-16. ISSN 2128-4428

Wong, Wai Peng and Wong, Kuan Yew (2008) A review on benchmarking of supply chain performance measures. Benchmarking , 15 . pp. 25-51. ISSN 1463-5771

Wong, Y. C. and Wong, Kuan Yew (2011) Approaches and practices of lean manufacturing: the case of electrical and electronics companies. African Journal Of Business Management, 5 (6). pp. 2164-2174. ISSN 1993-8233

Wong Kuan Yew, (2014) Evaluating reverse supply chain efficiency: manufacturer's perspective. Mathematical Problems in Engineering . ISSN 1024-123X

Wong Kuan Yew, (2014) Evaluating team performance using slack based data envelopment analysis. International Conference on Advanced Communication Technology, ICACT . pp. 1152-1157. ISSN 1738-9445

Wong Kuan Yew, (2014) Importance of knowledge protection in knowledge management and its classification of approaches. VISION 2020: Sustainable Growth, Economic Development, and Global Competitiveness, Vols 1-5 . pp. 255-265.

Wong Kuan Yew, (2014) Knowledge management in SMEs vs. large organizations. VISION 2020: Sustainable Growth, Economic Development, and Global Competitiveness, Vols 1-5 . pp. 266-279.

Wong Kuan Yew, (2014) Making the recruitment decision for fresh university graduates: a study of employment in an industrial organisation. International Journal of Management and Decision Making, 13 (4). pp. 380-402. ISSN 1462-4621

Wong Kuan Yew, (2014) Multi-floor facility layout improvement using systematic layout planning. Advanced Materials Research, 845 . pp. 532-537. ISSN 1022-6680

Wong Kuan Yew, (2014) A multiobjective fuzzy aggregate production planning model considering real capacity and quality of products. Mathematical Problems in Engineering . ISSN 1024-123X

Wong Kuan Yew, (2011) Simulation of sequencing rules using witness in a milling job shop? Communications of the IBIMA, 1943-7 (2011). 6 pages.

Wong, Kuan Yew (2005) A critical review of knowledge management frameworks. International Journal of Information Technology and Management , 4 (3). pp. 269-289. ISSN 1461-4111

Wong, Kuan Yew (2008) An exploratory study on knowledge management adoption in the Malaysian industry. International Journal of Business Information Systems, 3 (3). pp. 272-283. ISSN 1746-0972

Yaacob, M. S. and Jamaluddin, H. and Wong, K. C. (2002) Fuzzy logic approach for estimation of longitudinal aircraft parameters. Aeronautical Journal, 106 . pp. 585-594. ISSN 0001-9240

Yaacob, Mohd. Shafiek and Jamaluddin, Hishamuddin and Harun, Sobri (2005) Daily streamflow forecasting using simplified rule-based fuzzy logic system. The Journal of The Institution of Engineers, Malaysia, 66 (4). pp. 23-28. ISSN 0126-513X

Yaacob, Mohd. Shafiek and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and F., Razaly and N. H., Ajizan and S. M., Saad (2010) User friendly system for the visually impaired in learning Al-Quran. WSEAS Transactions on Systems, 9 (6). 659 -668. ISSN 1109-2777

Yaakob, Omar and Tengku Ab Rashid,, Tengku Mohd Ariff and Abdul Mukti, Mohamad Afifi (2006) Prospects for Ocean Energy in Malaysia. International Conference on Energy and Environment 2006 (ICEE 2006) .

Yaakob, Omar and Abdul Ghani, Mohamad Pauzi and Adnan, Faizul Amri (2013) A review of muslim maritime tradition. Perintis E-Journal , 3 (2). pp. 1-15. ISSN 2232-0725

Yaakob, Omar and Nasirudin, A. and Abdul Ghani, Mohamad Pauzi and Mat Lazim, Tholudin and Abdul Mukti, Mohamad Afifi and Ahmed, Y. M. (2012) Parametric study of a low wake-wash inland waterways catamaran. Scientia Iranica, 19 (3). pp. 463-471. ISSN 1026-3098

Yaakob, Omar and Zainudin, Norazimar and Samian, Yahya and Abdul Malik, Adi Maimun and Palaraman, Robiahtul Adawiah (2010) Presentation and validation of remote sensing ocean wave data. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 4 (4). pp. 373-379. ISSN 2076-734X

Yaakob, Yazid and Kuwataka, Yu and Yusop, M. Zamri and Tanaka, Shihomi (2015) Room-temperature growth of ion-induced Si- and Ge-incorporated carbon nanofibers. Physica Status Solidi (B) Basic Research, 252 (6). pp. 1345-1349. ISSN 0370-1972

Yaakob, Yazid and Mohd. Yusop, Mohd. Zamri and Takahashi, Chisato and Rosmi, Mohamad Saufi and Kalita, Golap and Tanemura, Masaki (2015) In situ transmission electron microscopy of Ag-incorporated carbon nanofibers: the effect of Ag nanoparticle size on graphene formation. RSC Advances, 5 (8). pp. 5647-5651. ISSN 2046-2069

Yahaya Md. Sam, (2014) A review on integrated active steering and braking control for vehicle yaw stability system. Jurnal Teknologi, 71 (2). pp. 105-111. ISSN 0127-9696

Yahya, M. Yazid and Cantwell, W. J. and Langdon, G. S. and Nurick, G. N. (2008) The blast behaviour of fiber reinforced thermoplastic laminates. Journal of Composite Materials, 42 (21). pp. 2275-2297. ISSN 1530-793X

Yahya, Mohd. Yazid and Cantwell, W. J. and Langdon, G. S. and Nurick, G. N. (2011) The blast resistance of a woven carbon fiber-reinforced epoxy composite. Journal of Composite Materials, 45 (7). pp. 789-801. ISSN 0021-9983

Yasser Mohamed Ahmed, (2012) Boat survey using photogrammetry method. International Review of Mechanical Engineering (IREME), 6 (7). pp. 1643-1647. ISSN 1970-8734

Yasser Mohamed Ahmed Abdel Razak, (2014) Design of a new low cost ROV vehicle. Jurnal Teknologi (Sciences and Engineering), 69 (7). pp. 27-32. ISSN 0127-9696

Yeak, Su Hoe and Maimun, Adi (2003) Source distribution method and hydrodynamics coefficients of vessel. Jurnal Mekanikal, 15 . pp. 72-85. ISSN 0127-3396

Yehia Abdel Monem Ahmed Eldrainy, (2011) Large Eddy simulation and prelimiry modeling of the flow downstream a variable geometry swirler for gas turbine combustors. International Communications in Heat and Mass Transfer, 38 (8). pp. 1104-1109. ISSN 0735-1933

Yeo, Eng Soon and Mohd. Ghazali, Normah (2008) Numerical simulation of a microchip cooling wth microjet array. Jurnal Mekanikal (25). pp. 39-49. ISSN 0127-3396

Yousif Rasheed, Faisal Salah and Abdul Aziz, Zainal (2009) Soliton solutions of the complex Ginzburg-Landau Equation. Matematika, 25 (1). pp. 39-51. ISSN 0127-8274

Yusof, I. M. and Farid, N. A. and Zainal, Z. A. and Horizon, G. B. and Azman, M. (2009) Preliminary investigation of a converted four-stroke diesel to alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (2). pp. 101-114. ISSN 1996-3443

Yusof, I. M. and Horizon, G. B. and Noriman, K. and Miskam, A. and Zainal, Z. A. and Farid, N. A. (2009) Design, fabrication and testing of a swirl burner for alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (6). pp. 475-485. ISSN 1996-3343

Yusof , S. M. and Aspinwall , E. (2000) A conceptual framework for TQM implementation for SMEs. TQM Magazine, 12 (1). pp. 31-37. ISSN 0954-478X

Yusoff Y., (2011) Overview of nsga-ii for optimizing machining process parameters. Procedia Engineering, 15 . pp. 3978-3983. ISSN 1877-7058

Zadry, Hilma Raimona and Mohd. Yusof, Sha'ri (2006) Total Quality Management and theory of constraints implementation in Malaysian automotive suppliers : a survey result. Total Quality Management & Business Excellence, 17 (8). pp. 999-1020. ISSN 0954-4127, 1360-0613

Zain, M Z M and Tokhi, M O and Mohamed, Z (2004) Hybrid learning control with input shaping for input tracking and vibration suppression of a flexible manipulator. 7th Biennial ASME Conference Engineering Systems Design and Analysis .

Zain, M Z M and Tokhi, M O and Mohamed, Z and Mailah, M (2004) Hybrid iterative learning control of a flexible manipulator. Proceedings of the 23rd IASTED International Conference Modelling, Identification and Control . pp. 313-318.

Zainal Abidin, Shaiful Fadzil and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanain and Zahari, Izzarief and Said, M. (2015) The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation. Jurnal Teknologi, 77 (8). pp. 107-111. ISSN 0127-9696

Zaini Ahmad, (2014) Analytical solution and finite element approach to the 3D re-entrant structures of auxetic materials. Mechanics of Materials, 74 . pp. 76-87. ISSN 0167-6636

Zaini Ahmad, (2014) Dynamic energy absorption performances of rain forest vehicle (RFV) under frontal impact. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 123-129. ISSN 2180-3722

Zainudin Abdul Rasid, (2013) The post-buckling behavior of the composite plates with embedded shape memory alloy subjected to combined loading using finite element method. International Review of Mechanical Engineering, 7 (6). pp. 1121-1127. ISSN 1970-8734

Zakaria, Mohamad Shukri and Osman, Kahar and Musa, Md. Nor (2012) Boil-off gas formation inside large scale liquefied natural gas (LNG) tank based on specific parameters. Applied Mechanics and Materials, 229-31 . pp. 690-694. ISSN 1662-7482

Zakaria, N. and Ani, Farid Nasir and Yunus, M. N. M. and Husain, M. A. S. (2011) Oxidative pyrolysis of examination rubber gloves in the integral pyrolysis test plant. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 1-9. ISSN 1823-0334

Zakaria M.Z., (2012) Comparison between multi-objective and single-objective optimization for the modeling of dynamic systems. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 226 (7). pp. 994-1005. ISSN 0959-6518

Zakaria R., (2012) Potential retrofitting of existing campus buildings to green buildings. Applied Mechanics And Materials, 178-18 . pp. 42-45.

Zakuan, Norhayati and Mohd Yusof, Sha’ri and Mat Saman, Muhamad Zameri and Mohd. Shaharoun, Awaluddin and Laosirihongthong, Tritos (2012) The moderator effects of ISO/TS16949 certification in Thailand automotive industry. Procedia - Social and Behavioral Sciences, 40 . pp. 141-145. ISSN 1877-0428

Zamani, Shahrouz and Rad, Hamid Reza Bakhsheshi and Abdul Kadir, Mohammed Rafiq and Mohammad, Mohammad Reza Shafiee (2012) Synthesis and kinetic study of (Mo,W)Si ²-WSi ² nanocomposite by mechanical alloying. Journal of Alloys and Compounds, 540 . pp. 248-259. ISSN 0925-8388

Zardian, Mohsen Gol and Ayob, Amran (2015) Intelligent modelling and active vibration control of flexible manipulator system. Journal of Vibroengineering, 17 (4). pp. 1879-1891. ISSN 1392-8716

Zheng, Y. and Mohd. Taib, Jamaludin and Md. Tap, Masine (2011) Decomposition of interacting machining features based on the reasoning on the design features. International Journal of Advanced Manufacturing Technology, 58 (001-00). pp. 1-19. ISSN 0268-3768

Zolfagharian, A. and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abdul Rahim and Asarry, A. (2012) Suppressing chatter noise in windscreen wiper operation using a robust hybrid controller. International Review of Mechanical Engineering, 6 (3). pp. 630-635. ISSN 1970-8734

Zulkarnain Abdul Latiff, (2014) Experimental study on the performance of in-cabin ventilation system. Advances in Applied Mechanics and Materials, 493 . pp. 251-255. ISSN 1660-9336

Öchsner, Andreas (2009) Guest editorial : Materials Letters special issue on hollow sphere structures. Materials Letters, 63 (13-14). pp. 1107-1108. ISSN 0167577X

Öchsner, Andreas (2009) On some conceptual considerations for the finite element simulation of the oxygen out-diffusion in Ag-MgO composites. Defect and Diffusion Forum, 283 . 1 -5. ISSN 1012-0386

Öchsner, Andreas and Hosseini, Seyed Mohammad Hossein and Merkel, Markus (2009) Numerical simulation of perforated hollow sphere structures (PHSS) to investigate mechanical properties. Eco-Materials Processing and Design X, 620 . pp. 275-278. ISSN 0255-5476

Öchsner, Andreas and Mishuris, Gennady (2009) Modelling of the multiaxial elasto-plastic behaviour of porous metals with internal gas pressure. Finite Elements in Analysis and Design, 45 (2). pp. 104-112. ISSN 0168-874X

Öchsner, Andreas and Murch, Graeme E. (2008) Finite element verification of transmission conditions for thin reactive heat-conducting interphases. Defect and Diffusion Forum, 273 . 400 -405. ISSN 1012-0386

¨Ochsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Finite element modelling of oxygen diffusion and segregation at interfaces in Ag-MgO composites: parametric studies. Defect and Diffusion Forum , 273 . 461 -466. ISSN 1012-0386

Book Section

A. Rasid, Zainudin (2008) Finite element method in the thermal buckling analysis of Anisotropic Plates. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 105-123. ISBN 978-983-52-0563-7

A. Rasid, Zainudin and Ayob, Amran and Zahari, R. and Mustapha, F. and Majid, D. L. and Varatharajoo, R. (2011) Buckling and post-buckling improvements of laminated composite plates using finite element method. In: Key Engineering Materials. IEEE Explorer, pp. 530-535. ISBN 978-145771549-5

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Majid, D. L. and Rafie, A.S. M. (2011) Thermal post-buckling improvements of laminated composite plates using the active strain energy tuning approach. In: Advanced Materials Research. Scientific.net, Guangzhou, pp. 2235-2238. ISBN 978-303785214-9

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Mustapha, F. and Majid, D. L. and Varatharajoo, Renuganth (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. In: Key Engineering Materials. Scientific.net, Kuala Lumpur, pp. 536-541. ISBN 978-303785059-6

Abd. Kader, Ab. Saman and Sulaiman, Oladokun (2008) Sustainable navigation channel requirement for restricted inland waterways. In: Advances In Marine Technology. Penerbit UTM, Johor, pp. 105-128. ISBN 978-983-52-0548-4

Abd. Kader , Ab. Saman and Abdul Jamal, Hamzah (2008) Development a fuzzy expert system package for development planning of a container terminal. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 19-36. ISBN 978-983-52-0548-4

Abd. Kader , Ab. Saman and Ahmad, Mohd. Zamani (2006) The development and use of inland waterway system for eco-transportation. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 151-170. ISBN 978-983-52-0546-0

Abd. Kader , Ab. Saman and Kong, Kim Fong (2006) Management of inland waterway system for transportation. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 135-150. ISBN 978-983-52-0546-0

Abd. Rahman, M. N. and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri (2011) Investigation of the physical risk factor in wall plastering job using WERA method. In: IMECS 2011 - International MultiConference of Engineers and Computer Scientists 2011. Newswood Limited, Hong Kong, pp. 1302-1304. ISBN 978-988192512-1

Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar and Jamaluddin, Hishamuddin and Mohd. Samin, Pakharuddin (2006) Semi Active Suspension System on Passenger Vehicle Model. In: Advances in Mechanical Engineering 2006 Part I. UTM, Johor , 83 - 98. ISBN 978-983-52-0544-6

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Ali, Mohd. Fawzi and Mohammad Said, Mohd. Farid and Said, Mazlan (2008) Performance and emission evaluations of a prototype stepped-piston engine using carburetor and direct fuel-injection systems. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 89-104. ISBN 978-983-52-0550-7

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Said, Mazlan (2008) Evaluation on the potential of Ethylene as fuel for internal combustion engines. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Abdul Hamid, Mohd. Foad and Idrus, Arazi and Potty, Narayanan Sambu and Cossa, Nelson J. and Nizamani, Zafarullah (2011) Resistance parameters statistics for jacket platforms in offshore Malaysia. In: Proceedings of the International Offshore and Polar Engineering Conference. Elsevier, Maui, Hawaii,, pp. 226-232. ISBN 978-1-880653-96-8

Abdul Hamid, Mohd. Kameil and Stachowiak, G. W. (2011) The effects of grit particle size on frictional characteristics of automotive braking system. In: Advanced Materials Research. Scientific.net, pp. 3511-3516. ISBN 978-303785031-2

Abdul Hamid, Mohd. Kameil and Stachowiak, G. W. and Samion, Syahrullail (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 905-913. ISBN 978-073541032-9

Abdul Jamal, Hamzah and Ahmad, Mohd. Zamani and Abd. Kader, Ab. Saman (2008) Critical issues in technology transfer on the Malaysian shipbuilding industry. In: Advances in Marine Technology. Penerbit UTM , Johor, p. 199. ISBN 978-983-52-0548-4

Abdul Kadir, Mohammed Rafiq and Haron, H. and Kamsah, N. and Nordin, N. (2008) Miniplates orientation for fracture fixation of the mandibular condyle. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 438-441. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Aminullah, M. A. (2008) Finite element study of metacarpophalangeal joint silicone implants. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 420-423. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Sabudin, H. (2008) Stability of talus component in total ankle arthroplasty. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 453-456. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and N. , Kamsah and M. , Salim Effect of metal back geometry on the stability of cementless acetabular cup. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 410-413. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Aziz, Z. Eccentric loading on the tibial plate after knee replacement. In: IFMBE Proceedings. Springer Berlin Heidelberg, Germany, pp. 403-406. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Osman, K. and Zainuddin, A. I. (2008) The use of mechanical interlock in dental prosthesis. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 457-460. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Syahrom, A. and Yusof, M. A. R. and Kamsah, N. (2008) Micro-modelling and Analysis of Actual and Idealised Cancellous Structure. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 433-437. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Taib, I. and Osman , K. and Abdul Hamid, M. H. (2008) Blood flow simulation of stented aneurysm model. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 398-402. ISBN 1680-0737

Abdul Malik,, Adi Maimun and Priyanto, Agoes and Khairul Anuar, Khairul Anuar (2008) Manoeuvring control characteristics for pusher arge in restricted water. In: Advances In Marine Technology. Penerbit UTM , Johor, pp. 129-150. ISBN 978-983-52-0548-4

Abdul Rahman, Roslan and Tamin, Mohd. Nasir and Kurdi, Ojo (2008) Effect of child model size and mesh refinement to the sub modeling techniques result accuracy in finite element analysis. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 143-158. ISBN 978-983-52-0549-1

Abdul Wahid, Mazlan and Ahmad Faiz, M. Z. and Saqr, Khalid M. (2012) Direct thrust force measurement of pulse detonation engine. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 1257-1263. ISBN 978-073541032-9

Abdul Wahid, Mazlan and Bakar, Mohd. Azwan and Ujir, Mohd. Haffis (2006) Pulse combustor performance characteristics. In: Advances in Mechanical Engineering 2006 Part I. UTM, Johor , 31 - 50. ISBN 978-983-52-0544-6

Abdul Wahid, Mazlan and Mat Zin, Ahmad Faiz and Ujir, Mohd. Haffis and Bahsan, Rosnadiah (2008) Diffusive thermal instability in premixed flame. In: Advances in Mechanical Engineering. Penerbit UTM , Johor. ISBN 978-983-52-0552-1

Abdul Wahid, Mazlan and Ujir, Abdul Haffis (2008) High speed combustion of gaseous hydrocarbon fuels. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 33-74. ISBN 978-983-52-0549-1

Abdul Wahid, Mazlan and Ujir, Haffis (2012) Reacting shock waves characteristics for biogas compared to other gaseous fuel. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 90-99. ISBN 978-073541032-9

Abdullah, Afnizanfaizal and Deris, Safaai and Mohamad, Mohd. Saberi and Mohd. Hashim, Siti Zaiton (2012) A new hybrid firefly algorithm for complex and nonlinear problem. In: Advances in Intelligent and Soft Computing. Springer, Spain, pp. 673-680. ISBN 978-364228764-0

Abdullah, H. B. and Kamsah, Nazri (2012) Stability of cementless hole and non-hole hip prosthesis. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 33-37. ISBN 978-145771989-9

Abdullah, Haslina and Kamsah, Nazri (2008) Thermally-induced evaluation of interfacial shear stress in finned metal foam heat sink. In: Advances in Thermo-Fluids. Penerbit UTM, Johor, pp. 45-54. ISBN 978-983-52-0541-5

Abdullah, Hayati and Tharmarajah, V. and Abdullah, M. Fuad and Lee, B. P. and Lee, C. K. (2006) Software Tools for Determining Boiler Performance. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 113-126. ISBN 978-983-52-0543-9

Abdullah, M. Y. H. and Hussein, Mohamed and Md. Zain, Mohd Zarhamdy and Ahmad, R. R. and Ganesh, R. (2008) Effect of transducer mass on thin plate vibration. In: Proceedings - International Symposium on Information Technology 2008, ITSim. Institute of Electrical and Electronics Engineers, New York, 2852 -2858. ISBN 978-142442328-6

Abdullah, Mohd. Yunus and Mohamed Hussein, Mohamed Hussein and Low, Chun Yuen (2008) Vibration transmission in soil. In: Advances in Mechanical Engineering Part II. Penerbit UTM, Johor, pp. 137-164. ISBN 978-983-52-0552-1

Abdullah, Mohd. Yunus and Sulaiman, Razali and Mohd. Zahari, Mohd. Za'im (2006) Dynamics behaviour of composite based honeycomb structure. In: Advances in Mechanical Engineering 2006 Part I. Penerbit UTM, Johor , 15 - 30. ISBN 978-983-52-0544-6

Abdullah Kamaruzaman, (2012) Development of an on-board visual display for early knock detection in SI engine. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 1-10. ISBN 978-967-354-189-8

Abdulrahman, A. S. and Ismail, M. and Hussain, Mohammad Sakhawat (2011) Inhibiting sulphate attack on concrete by hydrophobic green plant extract. In: Advanced Building Materials. Trans Tech Publications, Switzerland, pp. 3837-3843. ISBN 978-303785127-2

Abdulrazak, Lway Faisal and Abdul Rahim, S. K. and Abd. Rahman, Tharek (2009) New algorithm to improve the coexistence between IMT-advanced mobile users and fixed satellite service. In: Proceedings of 2009 International Conference On Machine Learning and Computing (IACSIT ICMLC 2009). World Acad Union-World Acad Press, England, pp. 294-301. ISBN 978-1-84626-018-6

Abidin, Ummikalsom and Mohd. Ghazali, Normah (2008) Entropy generation minimization analysis of a microchannel. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Abu Bakar, Abd Rahim and Ouyang, Huajiang (2008) Recent studies of car disc brake squeal. In: New Research on Acoustics. Nova Science Publishers, Inc, New York, pp. 159-196. ISBN 978-1-60456-403-7

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 57-64. ISBN 978-073541032-9

Adnan, Faizul Amri and Yasukawa, Hironori (2008) Prediction method of wave-induced loads for a laterally drifting ship in waves. In: Advances In Marine Technology. Penerbit UTM , Johor, pp. 67-92. ISBN 978-983-52-0548-4

Ahmad, A. and Md. Zain, Mohd Zarhamdy and Abu-Bakar, Abd Rahim and Abd Ghani, Badri and Abdul Rahman, Roslan and As’arry, Azizan (2008) Application of input shaping control strategy for reducing chatter noise in the automotive wiper system. In: Proceedings - International Symposium on Information Technology 2008, ITSim. IEEE, New York, pp. 2681-2685. ISBN 978-142442328-6

Ahmad, R. and Che Omar, M. B. and Yaacob, Mohd Shafik and Hussein, M. and Md Zain, M. Z. (2008) Modeling of human motion through motion captured data. In: Proceedings - International Symposium on Information Technology 2008, ITSim. Institute of Electrical and Electronics Engineers, New York, 2070 -2076. ISBN 978-142442328-6

Ahmad, R. R. and Yaacob, Mohd Shafik and Che Omar, M. B. (2008) Kinematics modeling of human motion using system identification technique. In: Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008. Institute of Electrical and Electronics Engineers, New York, 338 -343. ISBN 978-076953136-6

Ahmad, Robiah and Hashim, M. H. (2011) Development of energy harvesting device using piezoelectric material. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, pp. 1-6. ISBN 978-145770005-7

Ahmad, Robiah and Jamaluddin, Hishamuddin and Hussain, Mohd. Azlan (2007) Model structure selection for discrete-time systems using memetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 149-186. ISBN 978-983-52-0545-3

Ahmad, Robiah and Mohd. Nor, Mohamad Fitri (2010) Parameter estimation of nonlinear discrete-time dynamic systems using genetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 97-120. ISBN 978-983-52-0545-3

Ahmad Sabki, Ahmad Fuaad (2008) Designing for competitive advantage : the primary factor for the future of the Malaysian. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 177-198. ISBN 978-983-52-0548-4

Ali Jebelli, (2011) A controller design based fuzzy logic for an autonomous underwater robot. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 143-164. ISBN 978-967-354-185-0

Ali Marzoughi, (2011) Performance improvement of a single shaft gas turbine system temperature control using particle swarm optimization. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 81-105. ISBN 978-967-354-183-6

Ammoo, Mohd. Shariff and Mohd. Nayan, Mohd. Idham (2008) Development of UTM 4-seater helicopter plugue. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 133-144. ISBN 978-983-52-0542-2

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar (2012) Homogenous charge compression ignition (HCCI) technique: a review for application in two-stroke gasoline engines. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 53-57. ISBN 978-303785413-6

Ani, Farid Nasir (2008) Sustainable carbonaceour solid waste research for biofuel and other related applications. In: Advances in Thermo-Fluids. Penerbit UTM, Johor. ISBN 978-983-52-0541-5

Ani, Farid Nasir and Mat Nor, Nor Syarizan (2012) Microwave induced fast pyrolysis of scrap rubber tires. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 834-841. ISBN 978-073541032-9

Ani, Farid Nasir and Sarif, Safuwan (2008) Continuous conversion of biomass to biocoal. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 97-106. ISBN 978-983-52-0549-1

Asral, Asral and Md. Sheriff , Jamaluddin and Osman, Kahar (2007) Particle image velocimetry (PIV) measurements of flow structure downstream of a 2-D bluff body with the effect of wavy surface. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 135-162. ISBN 978-983-52-0547-7

Ayat, M. and Masrom, Maslin and Sahibuddin, Shamsul and Sharifi, M. (2011) Issues in implementing IT governance in small and medium enterprises. In: 2011 Second International Conference on Intelligent Systems, Modelling and Simulation (ISMS). IEEE, Los Alamitos, California Washington, pp. 197-201. ISBN 978-076954336-9

Ayob, A. B. and Tamin, M. N. and Elbasheer, M. Kabashi (2009) Pressure limits of thick-walled cylinders. In: IMECS 2009: International Multi-Conference Of Engineers And Computer Scientists, Vols I And II. Lecture Notes in Engineering and Computer Science . Int Assoc Engineers-IAENG, China, pp. 1649-1654. ISBN 978-988-17012-2-0

Ayob, Amran and Alias, Amran and Mozafari, H. (2011) Transmission conditions between carbon fiber and epoxy matrix for thin interphases. In: Key Engineering Materials. Scientific.Net, Kuala Lumpur, pp. 857-861. ISBN 978-303785059-6

Badreddin, Giuma S. K. and Kahar, Osman and Abdul Kadir, Mohamed Rafiq (2009) Numerical modeling of fusiform aneurysm with high and normal blood pressure. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Institute of Electrical and Electronics Engineers, New York, pp. 270-275. ISBN 978-076953648-4

Bengsoon, Matthias Edric and Abu Bakar, Abdul Rahim and Abdul Hamid, Mohd. Kameil (2012) Structural modification of disc brake judder using finite element analysis. In: Applied Mechanics and Materials. Trans Tech Publications, Zurich, Switzerland, pp. 68-72. ISBN 978-303785413-6

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) The effect of unburned gas axial velocity on the characteristics of rotational flame during flashback. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1285-1291. ISBN 978-073541032-9

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) Flashback of laminar premixed flame in rotating burner. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1292-1299. ISBN 978-073541032-9

Che Puan, Othman and Roshandeh, Arash Moradkhani and Joshani, Majid (2009) Artificial neural network model of traffic operations at signalized junction in Johor Bahru, Malaysia. In: Proceedings of the 13th WSEAS International Conference on Circuits - Held as part of the 13th WSEAS CSCC Multiconference. World Scientific And Engineering Acad And Soc, Athens, Greece, pp. 219-223. ISBN 978-960474096-3

Che Sidek, Nor Azwadi and Goh, C. K. and Afiq Witri, M. Y. (2012) Computational analysis of heat flow in computer casing. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 199-208. ISBN 978-073541032-9

Che Sidek, Nor Azwadi and Salehi, Mehran and Witri, Afiq (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 650-658. ISBN 978-073541032-9

Che Sidik, Nor Azwadi (2008) Lattice boltzman numerical method for the simulation of natural convection heat transfer in enclosure. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 1-16. ISBN 978-983-52-0549-1

Che Sidik, Nor Azwadi (2008) Lattice Boltzmann numerical method for simulation of isothermal and thermal fluid flow problems. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Che Sidik, Nor Azwadi (2007) Numerical simulation of three dimensional natural convection heat transfer. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 103-120. ISBN 978-983-52-0547-7

Che Sidik, Nor Azwadi and Afiq Witrib, M. Y. (2012) Simulation of multicomponent multiphase flow using lattice Boltzmann method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1025-1039. ISBN 978-073541032-9

Che Sidik, Nor Azwadi and Shukri, Z. Mohamad and Afiq Witri, M. Y. (2012) Numerical investigation of 2D lid driven cavity using smoothed particle hydrodynamics (SPH) method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 789-798. ISBN 978-073541032-9

Che Sidik, Nor Azwadi and Sulaiman, Mohd. Zuhairi (2006) Numerical simulation of multiphase flow problems using lattice boltzmann scheme. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 87-112. ISBN 978-983-52-0543-9

Che Sidik, Nor Azwadi (2007) Coupled lattice boltzmann with convention numerical methods. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor. ISBN 978-983-52-0547-7

Che Sidik, Nor Azwadi (2007) Theory and application of lattice Boltzmann numerical method on isothermal fluid flow problem. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 25-36. ISBN 978-983-52-0547-7

Chiew, Y. S. and Abdul Jalil, M. K. and Hussein, M. (2009) Motion cues visualisation of a motion base for driving simulator. In: 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008. Institute of Electrical and Electronics Engineers, New York, 1497 -1502. ISBN 978-142442679-9

Chiew, Y. S. and Jalil, A. M. K. and Hussein, M. (2008) Kinematic modeling of driving simulator motion platform. In: Proceedings of the 2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications, CITISIA. Institute of Electrical and Electronics Engineers, New York, 30 -34. ISBN 978-142442416-0

Chin Cheng Yoe, (2012) Hand rehabilitation robot to train reaching movement for stroke patient. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 193-197. ISBN 978-967-354-189-8

Darus, Amer Nordin (2008) An improved scheme for parabolic flow along a curved rectangular duct. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Darus, Amer Nordin and Yap, Yitt Fatt (2008) Effect of aspect ratio (g) and curvature ratio (HD/RO) on the occurrence of dean instability for the flow along a curved rectangular duct. In: Advances in Mechanical Engineering. Penerbit UTM , Johor, pp. 185-226. ISBN 978-983-52-0552-1

Daud, Mohd. Yusof and Lucas, Margaret (2008) Estimanation of interface friction during radial ultrasonic compression using finite element modelling. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 42-61. ISBN 978-983-52-0563-7

Eileen Su Lee Ming, (2011) Topological localization for mobile robot. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 137-152. ISBN 978-967-354-181-2

F. Nusyirwan, Istas (2008) Pursuit-evasion strategy using parallel evolutionary programming. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 1-27. ISBN 978-983-52-0542-2

Farahany, Saeed and Khafri, M. Aghaie and Ourdjini, Ali and Idris, Mohd. Hasbullah (2011) Influence of heat treatment on properties of hot isostatically pressed turbine blade superalloy IN738. In: Advances in Materials and Processing Technologies II. Trans Tech Publications, Switzerland, pp. 502-507. ISBN 978-303785053-4

Germaine Tan Wen Lyn, (2012) Robot range finder with stereo vision. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 83-89. ISBN 978-967-354-189-8

Gohari, Mohammad and Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak and Tahmasebi , Mona (2012) Bus seat suspension modification for pregnant women. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 404-407. ISBN 978-145771989-9

Golshokouh, Iman and Ani, Farid Nasir and Samion, Syahrullail (2012) Wear resistance evaluation of palm fatty acid distillate using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 928-935. ISBN 978-073541032-9

Hadzri, Edi Azali and Shamsudin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abdul Aziz, Azian (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 659-664. ISBN 978-073541032-9

Hamedon, Z. and Mon, T. T. and Sharif, Safian and Venkatesh, V. C. and Masri, A. R. M. and Sue-Rynley, E. (2011) Performance of nitrogen gas as a coolant in machining of titanium. In: Advances in Materials and Processing Technologies II. Advanced Materials Research, 264-26 . Trans Tech Publications, Switzerland, pp. 962-966. ISBN 978-303785053-4

Hamzah, Esah and Khoo, Chun Yong and Sudin, Izman (2008) Core drilling of hard and brittle materials with rotary ultrasonic machine. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 75-96. ISBN 978-983-52-0549-1

Harun, W. S. W. and Safian, S. and Idris, M. H. (2009) Evaluation of ABS patterns produced from FDM for investment casting process. In: Computational Methods and Experiments in Materials Characterisation IV. WIT Press, pp. 319-328. ISBN 978-184564189-4

Hasan, Mohd. Faizal and Takanobu, Yamada (2008) Performance analysis of cogeneration system using biogas from sewage fermantation. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Hashim, Jasmi and L. C., Yin (2006) Microstucture analysis and toughnee effect on weld joints. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 127-136. ISBN 978-983-52-0543-9

Hashimah Ismail, (2011) Motion control using voice for wheelchair application. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 125-148. ISBN 978-967-354-184-3

Hassan, Adnan (2008) Classification of Shewhart X-bar control chart patterns using artificial neural network. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 93-108. ISBN 978-983-52-0557-4

Heang Sheng Yao, (2012) Robotic camera system. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 183-191. ISBN 978-967-354-189-8

Hermawan, Hendra and D., Dube and D., Mantovani (2010) Degradable metallic biomaterials for cardiovascular applications. In: Metals for Biomedical Devices. Woodhead Publishing Limited, Oxford, United Kingdom, pp. 379-404. ISBN 978-1-84569-434-0

Hosseini, Seyed Ehsan and Salehirad, Saber and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1309-1312. ISBN 978-073541032-9

Husain, Abdul Rashid and Ahmad, Mohamad Noh and Mohd. Yatim, Abdul Halim (2008) Complex valued sliding mode for control of an active magnetic bearing system. In: Special Topics on Mechatronic System Design and Application. Penerbit UTM , Johor, p. 137. ISBN 978-983-52-0674-0

Hussein, Mohamed and Moore, Philip and Jun-Sheng, Pu and Chi-Biu, Wong (2007) Quadrature encoder signal emulation for integrated real-virtual environments and systems. In: International Conference on Intelligent and Advanced Systems 2007. Institute of Electrical and Electronics Engineering (IEEE), pp. 1135-1140. ISBN 978-1-4244-1355-3

Hussein, M. and As'arry, A. and Md. Zain, M. Z. and Mailah, M. and Abdullah, M. Y. (2009) Experimental study of human hand-arm model response. In: 2009 6th International Symposium on Mechatronics and its Applications. Article number 5164823 . IEEE, pp. 1-6. ISBN 978-142443481-7

Hussein, Mohamed and Md Zain, Mohd Zarhamdy and Ahmad, Robiah and Abdullah, Mohd Yunus (2009) Real-time machine controller verification and simulation using control signals emulation. In: 2009 6th International Symposium on Mechatronics and its Applications, ISMA 2009. Institute of Electrical and Electronics Engineers, New York, pp. 1-6. ISBN 978-142443481-7

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding SS 316L for the highest green strength by using Taguchi method. In: Advances in Materials and Processing Technologies II. Advanced Materials Research, 264-26 . Trans Tech Publications, Switzerland, pp. 135-140. ISBN 978-303785053-4

Ibrahim, Sallehuddin (2008) Particle size measurement and scattering effect on tomographic imaging system using optical fibres for pneumatic conveyor. In: Recent Development In Instrumentation System. Penerbit UTM , Johor, pp. 85-96. ISBN 978-983-52-0675-7

Idris, Mohd. Hasbullah and Lee, Chung Sin (2006) Hybrid modelling of automative turbocharger impleller by reverse engineering approach. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 1-40. ISBN 978-983-52-0543-9

Idris, Mohd. Hasbullah and Ourdjini, Ali and Hamzah, Esah and Clegg, Allen James (2006) The Application of Vibration and Inmould Techniques to Grain Refined Magnesium Based Alloy Cast in Investment Casting Process Mould. In: Advances in Mechanical Engineering 2006 Part I. UTM, Johor , 51 - 66. ISBN 978-983-52-0544-6

Idris, Norbik Bashah and Bharanidhran, Shanmugam (2005) Artificial intelligence techniques applied to intrusion detection. In: Proceedings of INDICON 2005: An International Conference of IEEE India Council. IEEE, pp. 52-55.

Idris, Mohd Hasbullah and Ourdjini, Ali and Hamzah, Esah and Clegg, Allen (2000) Suppression of Mold-Metal Reactions during Investment Casting. In: Magnesium Alloys and their Applications. Wiley InterScience Publisher, pp. 628-634. ISBN 9783527302826

Ishak, Mohd. Yunus and Mohd. Sam, Abdul Rahman and Abu Hassan, Shukur (2008) Shear behaviour of reinforced concrete beams strengthened with bonded carbon fibre reinforced polymer fibre. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 58-72. ISBN 978-983-52-0569-9

Ishak , Iskandar Shah and Tang, Mun Kit (2006) Experimental and computational fluid dynamic studies on microlight model. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 41-58. ISBN 978-983-52-0543-9

Islam, M. Rafiqul and Abdul Malik, Adi Maimun and Yaakob, Omar (2008) Motions of a floating ship while other ship passing nearby. In: Advances In Marine Technology. Penerbit UTM , Johor, pp. 37-50. ISBN 978-983-52-0548-4

Islam, M. Rafiqul and Jasmi, Mohammad Naim (2008) Drift forces of FPSO in regular waves. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 51-66. ISBN 978-983-52-0548-4

Islam, M.Rafiqul and Islam, Md. Nazrul and Baree, Md. Sadiqul (2006) A study on dynamic interaction of ships while in speed. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 41-58. ISBN 978-983-52-0546-0

Ismail, Meor Mohd. Rizal and Yahya, Wira Jazair and Abu, Aminuddin and Zainul Abidin, Mohd. Azman (2012) Thermal energy harvesting from automotive waste heat. In: Advanced Materials Research. Trans Tech Publications, Zurich, Switzerland, pp. 498-503. ISBN 978-303785415-0

Jafari, H. and Idris, Mohd. Hasbullah and Ourdjini, Ali and Rad, H. R. B. and Ardestani, S. S. K. and Ahmadshoar, V. (2011) Effect of mould runner and coating on graphite nodule characteristics and hardness of thin wall ductile iron. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 266-271. ISBN 978-303785053-4

Jafari, Hassan and Sadeghi, Rasoul and Idris, Mohd. Hasbullah and Ourdjini, Ali (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 480-485. ISBN 978-073541032-9

Jamaluddin, Hishamuddin and Shahrul Ramli, Shafizan (2007) Self-turning PID Control design. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 1-30. ISBN 978-983-52-0545-3

Jamaluddin, Khairur Rijal and Muhamad, Norhamidi and M. Ami, Sri Yulis (2008) Metal Injection Moulding (MIM) feedstock preparation with dry and wet mixing : a rheological behaviour investigation. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 76-93. ISBN 978-983-52-0563-7

Jamaludin, Khairur Rijal and Harun, M. R. and Muhamad, N. and Sulong, A. B. and Mohamad Nor, N. H. (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. In: Advanced Materials Research. Scientific.net, pp. 1199-1203. ISBN 978-303785133-3

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, A. and Zamani, Zamani and Pauzi, Pauzi and Saman, Saman (2012) Effect of stern hull shape on turning circle of ships. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1191-1196. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, Agoes and Ahmad, Mohd. Zamani and Abdul Ghani, Mohamad Pauzi and Saman, Saman (2012) Study on zigzag maneuver characteristics of V-U very large crude oil (VLCC) tankers. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1128-1132. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Priyanto, Agoes and Abdul Wahid, Mazlan and Zamani, Zamani and Saman, Saman and Pauzi, Pauzi (2012) An integrated CFD simulation tool in naval architecture and offshore (NAO) engineering. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 1175-1181. ISBN 978-073541032-9

Jazair, Wira and Kidoguchi, Yoshiyuki and Miwa, Kei (2008) Reduction of emissions in DI diesel engine using high turbulence combustion with EGR and pilot injection. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 59-88. ISBN 978-983-52-0550-7

Jong, Rudiyanto P. and Osman, Kahar and M. Adib, M. Azrul Hisham (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Melville, New York, pp. 604-611. ISBN 978-073541032-9

Juhana Jaafar, (2012) Nonholonomic mobile robot navigation using bezier curve trajectory planning and nonlinear tracking control law. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Wiley, pp. 251-265. ISBN 978-1-1180-2549-1

Jusoh, Iberahin (2008) Loading and response of offshore jacket structure. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 175-200. ISBN 978-983-52-0549-1

K., Hudha and Harun, M. Hafiz and Harun, M.H., Mohd. Hanif and Jamaluddin, Hishamuddin (2011) Lateral suspension control of railway vehicle using semi-active magnetorheological damper. In: 2011 IEEE Intelligent Vehicles Symposium (IV). IEEE, pp. 728-733. ISBN 978-145770890-9

Kadir, Z. A. and Hudha, K. and Jamaluddin, Hishamuddin and Ahmad, F. and Imaduddin, F. (2011) Active roll control suspension system for improving dynamics performance of passenger vehicle. In: Proceedings of 2011 International Conference on Modelling, Identification and Control, ICMIC 2011. IEEE Explorer, pp. 492-497. ISBN 978-095671570-8

Kamsah, Mohd Nasir and Tamin, Nazri (2007) Aspect of modelling the mechanics of solder/intermetallic interface fracture process in solder interconnects. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 55-76. ISBN 978-983-52-0547-7

Kamsah, Nazri and Tamin, Mohd. Nasir and Mohamed Kamar, Haslinda and Lahuri, Hidayatunnur and Wagiman, Amir Nur Rashid (2012) Development of vapor pressure in FR4-copper composite material during solder reflow process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 116-123. ISBN 978-073541032-9

Kang, Hooi Siang and Abdul Jalil, Mohamad Kasim and Mailah, Musa (2004) A PC-based driving simulator using virtual reality technology. In: Proceedings VRCAI 2004 - ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Applications in Industry. ACM, New York, pp. 273-277. ISBN 1-58113-884-9

Karimian, M. and Ourdjini, Ali and Idris, Mohd. Hasbullah and Asmael, M. B. A. (2011) Effect of pouring temperature and melt treatment on microstructure of lost foam casting of AL-Si LM6 alloy. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 295-300. ISBN 978-303785053-4

Kaviri, A. Ganjeh and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Kaviri, H. Ganjeh (2012) The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1141-1155. ISBN 978-073541032-9

Kazi, S. and As'arry, A. and Md Zain, M. Z. and Mailah, M. and Hussein, M. and Mat Darus, I. Z. Biodynamic response of the human hand-arm models under vibration. In: ACMOS '08: Proceedings Of The 10Th Wseas International Conference On Automatic Control, Modelling And Simulation. Electrical And Computer Engineering . World Scientific And Engineering Acad And Soc, Athens, Grece, pp. 237-242. ISBN 978-960-6766-63-3

Khalid Mohamed Nor, (2012) Robot arm end effector control using soft actuator. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 189-206. ISBN 978-983-52-0816-4

Khattak, M. A. and Khan, M. A. and Tamin, Mohd. Nasir (2011) Effects of thermal aging on ductile-to-brittle transition temperature behavior of welded A516 steel. In: Key Engineering Materials. Trans Tech Publications, Germany, pp. 1379-1384. ISBN 978-087849210-7

Koh, Kho King and Thong, Jia Rong (2006) Bulbous bow for high speed displacement craft. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 59-72. ISBN 978-983-52-0546-0

Kuan, Yew Wong and Abdul Salaam, Hadi (2008) Discrete-event simulation of an automotive part manufacturing INE. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 109-128. ISBN 978-983-52-0557-4

Kurniawan, T. B. and Ibrahim, Z. and Noor, K. K. and Marzuki, K. (2009) A population-based ant colony optimization approach for DNA sequence optimization. In: 3rd Asia International Conference on Modelling and Simulation. IEEE, Washington, DC, USA, pp. 246-251. ISBN 978-0-7695-3648-4

Lalmazloumian, Morteza and Wong, Kuan Yew (2012) A review of modelling approaches for supply chain planning under uncertainty. In: 2012 9Th International Conference on Service Systems and Service Management - Proceedings of ICSSSM '12. IEEE, New York, USA, pp. 197-203. ISBN 978-145772025-3

Loghmanian, S. Mohammad Reza and Ahmad, Robiah and Jamaluddin , Hishamuddin (2009) Multi-objective optimization of NARX model for system identification using genetic algorithm. In: 2009 1st International Conference on Computational Intelligence, Communication Systems and Networks, CICSYN 2009. Institute of Electrical and Electronics Engineers, New York, 196 -201. ISBN 978-076953743-6

M. Samsuri, Saiful Farhan and Ahmad, Robiah and Hussein, Mohamed and Abdul Rahim, Abd. Rahman (2009) Wireless system for monitoring environmental variables of rain shelter house (RSH). In: 2009 First International Conference on Computational Intelligence, Communication Systems and Networks. Institute of Electrical and Electronics Engineers, New York, pp. 119-124. ISBN 978-0-7695-3743-6

M. Saqr, Khalid and Abdul Wahid, Mazlan and Che Sidik, Nor Azwadi (2008) On the use of Boltzmann quation in the mathematical modelling of gaseous detonations. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, p. 201. ISBN 978-983-52-0549-1

M. Saqr , Khalid and C. Sidik , Nor Azwadi and Aly , Hossam S. and A. ElDrain, Yehia (2009) Uncharacteristic phenomenon in the nonisothermal taylor-couette flow. In: 2009 International Conference on Signal Processing Systems, ICSPS 2009. Institute of Electrical and Electronics Engineers, New York, 879 -883. ISBN 978-076953654-5

Mailah, Musa (2006) Modified active force control and iterative learning control of a robot arm. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 137-150. ISBN 978-983-52-0543-9

Mailah, Musa and Faisal, Mohamad Shaheed (2008) Pitch attitude control of a satellite system using active force control with fuzzy logic. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 147-163. ISBN 978-983-52-0542-2

Mailah, Musa and Hashemi-Dehkordi, S. M. and Abu Bakar, A. R. (2008) Brake squeal control using AN active technique. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 41-58. ISBN 978-983-52-0550-7

Mailah, Musa and Hashemi-Dehkordi, Sayed Mahdi and Bakar, Adnall R. A. (2009) An active control method to reduce the effect of negative damping in disk brake system. In: 2009 Innovative Technologies in Intelligent Systems and Industrial Applications, CITISIA 2009. Article number 5224246 . Elsevier, pp. 34-39. ISBN 978-142442887-8

Mailah, Musa and Jahanabad, Hossein and Md. Zain, M. Z. (2009) Active force control of a fluidic muscle system using fuzzy logic. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. Article number 5229778 . Elsevier, pp. 1970-1975. ISBN 8-142442853-3

Mailah, Musa and Lim, Boon Han (2008) Biometric signature verification. In: Advances in Mechanical Engineering Part II. Penerbit UTM , Johor, pp. 165-184. ISBN 978-983-52-0552-1

Mailah, Musa and Mod Zain, Mohd. Zarhamdy and Jahan Abadi, Hossein (2008) Robust trajectory tracking control of human-like arm. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 17-32. ISBN 978-983-52-0549-1

Mailah, Musa and Mohd. Nor, Nur Safwati (2011) Vibration suppression of hard disk drive mechanism using intelligent active force control. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE Explorer, Kuala Lumpur. ISBN 978-1-61284-437-4

Mailah, Musa and Purnomo, Didik Setyo (2006) Nonholonomic mobile robot with adaptive active force control strategy. In: Advances in Mechanical Engineering 2006 Part I. UTM, Johor , 67 - 82. ISBN 978-983-52-0544-6

Mailah, Musa and Tang, Howe Hing (2006) Hybrid intelligent active force control of a robotic manipulator. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 69-86. ISBN 978-983-52-0543-9

Mailah, Musa and Wijaya, M. Lutfi and Mohd. Samin, Pakhharuddin (2006) Antilock braking system using active force control. In: Advances in Mechanical Engineering 2006 Part I. Penerbit UTM, Johor , pp. 99-116. ISBN 978-983-52-0544-6

Mailah , Musa and Pitowarno, Endra and Jamaluddin , Hisahamuddin (2007) A mobile manipulator with knowledge based fuzzy active force control. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 187-202. ISBN 978-983-52-0545-3

Maimun, Adi and Muhammad, A. Haris (2006) Ship Handling and safety in restricted water. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 73-88. ISBN 978-983-52-0546-0

Maimun, Adi and Muhammad, A. Haris and Fitriadhy, Ahmad and Zulkhairullah, A. and Vigneshwaran, S. (2006) Effect of double chine on planning hull vessel performance. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 89-120. ISBN 978-983-52-0546-0

Mansor, Shuhaimi and Perumal, Kannan (2008) Development of a flight Dynamics Engineering Simulator (FDES) at Universiti Teknologi Malaysia : an overview. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 33-53. ISBN 978-983-52-0542-2

Masood, Ibrahim and Hassan, Adnan (2008) Application of full factorial experiment in designing an ANN-based control chart pattern recognizer. In: Advances in Mechanical Engineering. Penerbit UTM , Johor, pp. 107-120. ISBN 978-983-52-0591-0

Mat Darus, Intah Zuhrah (2007) Numerical modelling of a flexible plate system. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 47-72. ISBN 978-983-52-0545-3

Mat Darus, Intah Zuhrah (2011) Parametric identification and active vibration control of a flexible plate system. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 135-148. ISBN 978-983-52-0545-3

Mat Darus, Intan Zaurah and Tokhi, Mohd 0sman and Mohd Hashim, Siti Zaiton (2004) Modelling and control of a flexible structure using adaptive neuro-fuzzy inference system algorithm. In: Icm '04: Proceedings Of The Ieee International Conference On Mechatronics 2004. Institute of Electrical and Electronics Engineers, New York, pp. 159-164. ISBN 0780385993

Mat Saman, Muhamad Zameri (2008) End-of-life vehicle directive : a new paradigm in modern vehicle design and development process. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 129-162. ISBN 978-983-52-0557-4

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2012) Effect of semi-circular wavy liner on performance of journal bearing. In: 4Th International Meeting of Advances In Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 571-577. ISBN 978-073541032-9

Md. Tap, Masine and Marsono, Abdul Kadir (2008) Industrial engineering in construction industry. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 1-16. ISBN 978-983-52-0557-4

Md. Zin, Mohd Zarhamdy and Hussein, Mohamed and Tokhi, M. Osman (2007) Hybrid interactive learning control scheme with acceleration feedback of flexible manipulator. In: Recent Trends In Systems And Control. Penerbit UTM, Johor, pp. 73-96. ISBN 978-983-52-0545-3

Misman, Muhammad Faiz and Mohammad, Mohd. Saber and Deris, Safaai and Raja Mohamad, Raja Nurul Mardhiah and Mohd. Hashim, Siti Zaiton and Omatu, Sigeru (2012) A hybrid of SVM and SCAD with group-specific tuning parameter for pathway-based microarray analysis. In: Advances in Intelligent and Soft Computing. IEEE, Spain, pp. 387-394. ISBN 978-364228764-0

Mohamed Kamar, Haslinda and Kamsah, Nazri and Md.Tap, Masine and Salimin, K. A. M. (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, New York, USA, pp. 247-254. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Kamsah, Nazri and Mohammad Nor, Ahmad Miski (2012) Numerical analysis of air-flow and temperature field in a passenger car compartment. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 854-862. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Senawi, Mohd. Yusoff (2008) Empirical Correlations for the Sir-Side Steady-State Performance of a cooling coil in an automotive air conditioning system. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Mohd Fua'ad Rahmat, (2011) Prediction system in dengue patients using system identification techniques. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, p. 44197. ISBN 978-967-354-183-6

Mohd Fua'ad Rahmat, (2011) System identification, estimation and controller design for an electro-hydraulic actuator system. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 23-44. ISBN 978-967-354-183-6

Mohd Fua'ad Rahmat, (2011) Variable structure control with reaching law for an electro-hydraulic actuator. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 45-68. ISBN 978-967-354-183-6

Mohd Fua'ad Rahmat , (2011) A model based neural network controller for a hot air blower system. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 137-158. ISBN 978-967-354-183-6

Mohd Hazmil Syahidy , Abdol Azis and Che Sidek, Nor Azwadi (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low reynolds number. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 49-56. ISBN 978-073541032-9

Mohd Taufiq Khairi, (2012) Industrial illegal toxic waste disposal via smart detection system. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 93-134. ISBN 978-967-354-188-1

Mohd Zain, Azlan and Haron, Habibollah and Sharif, Safian (2009) Review of ANN technique for modeling surface roughness performance measure in machining process. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Institute of Electrical and Electronics Engineers, New York, 35 -39. ISBN 978-076953648-4

Mohd. Ghazali, Normah and Eng Soon, Yeo (2007) Simulation of a microjet array cooling system. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 37-54. ISBN 978-983-52-0547-7

Mohd. Ghazali, Normah and Ghazali, Ahmad Dairobi and Ali , Irwan Shah and A. Rahman, Muhammad Aminullah (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1320-1324. ISBN 8-073541032-9

Mohd. Ghazali, Normah and Lau Lau, Kwan Yiew and Mohd.Yusoff, S. (2012) Thermal analysis of Malaysian double storey housing - low/medium cost unit. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 513-520. ISBN 978-073541032-9

Mohd. Ghazali, Normah and Satar, Nurudin (2008) Analysis of thermo acoustic stack geometry. In: Advances In Mechanical Engineering 2008 Part I. Penerbit UTM , Johor, pp. 129-142. ISBN 978-983-52-0549-1

Mohd. Ghazali, Normah (2007) Vortex motion in an acoustic chamber. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 121-134. ISBN 978-983-52-0547-7

Mohd. Hashim, Siti Zaiton and Mat Darus, Intan Zaurah and Tokhi, Mohd 0sman (2004) Nonlinear dynamic modelling of flexible beam structures using neural networks. In: ICM '04: Proceedings of the IEEE International Conference On Mechatronics 2004. IEEE, USA, pp. 171-175. ISBN 0780385993

Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohd. Shaiful and Saharin, Sanisah (2006) Low emission control techniques for burner system. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 1-40. ISBN 978-983-52-0543-9

Mohd. Jaafar, Mohammad Nazri and Kaviri, A. G. (2011) Thermodynamic modeling and exergy optimization of a gas turbine power plant. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. IEEE, Xi'an, pp. 366-370. ISBN 978-161284485-5

Mohd. Jaafar, Mohammad Nazri and Kimsin, Intan Noryanah and Rahmat, Mohd. Zaki Yamani and Wahab, Mohd. Muzamil and Abdul-Latif, Ainullotfi and Wan Ali, Wan Khairuddin and Mat Yajid, Zuriana Mariati (2008) Burning rate studies on solid propellant. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 79-94. ISBN 978-983-52-0542-2

Mohd. Jaafar, Mohammad Nazri and Aly, Hossam S. and Eldrainy, Yehia (2007) Turbulence modelling: basic, capabilities and areas of needed research. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 1-24. ISBN 978-983-52-0547-7

Mohd. Radzi, Abdul Qoiyum and Abdul Wahid, Mazlan and Osman, Kahar and Ujir, Mohd. Haffis (2008) Analysis of flow in pulse combustor tailpipe. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Mohamad, Ismail (2008) Deriving success factors and quality and firm performance in statistical process control implementation : an Exploratory Factors Analysis (EFA) approach. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 67-92. ISBN 978-983-52-0557-4

Mohd. Sam, Abdul Rahman and Ishak, Mohd.Yunus and Abu Hassan, Shukur (2008) Fibre reinforced polymer composite in infrastructure application. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 15-30. ISBN 978-983-52-0569-9

Mohd. Sam, Abdul Rahman and Maslan, Mohammad Haidir and Ishak, Mohd. Yunus and Ismail, Yob Saed and Abu Hassan, Shukur (2008) Behaviour of carbon fibre reinforced polymer plate under tensile load. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 31-39. ISBN 978-983-52-0569-9

Mohd. Samin, Pakhharuddin and Abu Bakar, Saiful Anuar and Jamaluddin, Hishamudin and Abd. Rahman, Roslan and Hudha, Krisbullah (2006) Modelling, simulation and validation of vehicle ride and handling model. In: Advances in Mechanical Engineering Part 2 - 2006. Penerbit UTM, Johor , pp. 59-68. ISBN 978-983-52-0543-9

Mohd. Taib, Jamaluddin (2006) Recognition orthogonal and non orthogonal slot and step from 2D orthographic drawing. In: Advances in Mechanical Engineering 2006 Part I. Penerbit UTM, Johor , pp. 117-128. ISBN 978-983-52-0544-6

Mohd. Yusof, Noordin and Davoudinejad, Ali and Shaari, Mohd. Rosmaini (2012) Effect of tool edge geometry on cutting force and surface roughness when hard turning tool steel. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 15-19.

Mohd. Yusof, Noordin and Wan Abdul Rahaman, Wan Emri and Hendriko, Hendriko and Kurniawan, Denni (2008) Tool life and surface roughness when turning hardened aisi D2 tool steel using ceramic cutting tool with t-land cutting edgetool life and surface roughness when turning hardened aisi D2 tool steel using ceramic cutting tool with T-land cutting edge. In: Advances In Manufacturing And Industrial Engineering. Penerbit UTM, Johor, pp. 185-202. ISBN 978-983-52-0557-4

Mohd. Yusop, Mohd. Zamri and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and As'arry, A. (2012) Performance of a passive device in improving tremor patients' handwriting capability. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 400-403. ISBN 978-145771989-9

Mohd. Zain, Azlan and Haron, Habibollah and Sharif, Safian (2009) Application of regression and ANN techniques for modeLling of the surface roughness in end milling machining process. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Article number 5071981 . Institute of Electrical and Electronics Engineers, New York, pp. 188-193. ISBN 8-076953648-4

Mon, T. T. and Ramli, J. and Jeefferie, A. R. and Sharif, Safian and Venkatesh, V. C. (2011) Performance of cryogenic machining with nitrogen gas in machining of titanium. In: Advances in Mechanical Engineering. Applied Mechanics and Materials, 52-54 . trans Tech Publications, Switzerland, pp. 2003-2008. ISBN 978-303785077-0

Motasemi, Farough and Ani, Farid Nasir (2012) Microwave irradiation biodiesel processing of waste cooking oil. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 842-852. ISBN 978-073541032-9

Mozafari, H. and Abdi, B. and Ayob, Amran (2012) Opt.imal design of non-monotonic heat-conducting thin adhesive layer based on imperialist competitive algorithm. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 949-955. ISBN 978-303785262-0

Mozafari, H. and Abdi, B. and Ayob, Amran (2011) Optimization of transmission conditions for thin interphases in composite materials based on colonial competitive algorithm. In: Composite Science and Technology. Key Engineering Materials, 471 - . Trans Tech Publications, Switzerland, pp. 862-867. ISBN 978-303785059-6

Muhaimin, Abdul Halim and Mailah, Musa and Mohamad, Masilah (2007) Experimental implementation of active force control on a vehicle suspension model. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 31-46. ISBN 978-983-52-0545-3

Muhamad Said, Mohd. Farid and Said, Mazlan and Abdul Aziz, Azhar (2012) Modelling of diesel engine fuelled with biodiesel using engine simulation software. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 307-313. ISBN 978-073541032-9

Muhammad Izuan Abdullah, (2012) Glove-controlled robotic arm with pressure sensor. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 71-81. ISBN 978-967-354-189-8

Muhammad Saiful Badri Mansor, (2012) Fire fighting robot-rabricating the prototype. In: Process Tomography & Instrumentation -Series 10. Penerbit UTM, Skudai, Johor, pp. 75-92. ISBN 978-967-354-188-1

Musa, Md. Nor and Osman, Kahar and Hamat, Ab. Malik A. (2012) Computational analysis of flow field around ahmed car model passing underneath a flyover. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 190-198. ISBN 978-073541032-9

Nasir, Nazri and Olaf-Lehmann, Fritz and Bijl, Hester (2008) Forces integration and deformation modelling of the flapping wing insect : Calliphora Vicina. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 113-130. ISBN 978-983-52-0542-2

Nasution, Henry and Zainudin, Muhammad Amir and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Perang, Mohd. Rozi and Abdul Rahman, Abd. Halim (2012) Experimental evaluation of automotive air-conditioning using HFC-134A and HC-134A. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 997-1002. ISBN 978-073541032-9

Ngali, Zamani and Osman, Kahar and Johari, Nasrul Hadi (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1040-1048. ISBN 978-073541032-9

Nilda Tri, Putri and Mohd Yusof , S. (2008) A review of quality engineering tools and techniques practices in Malaysia's and Indonesia's automotive industries and an agenda for future research. In: Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology, ICMIT. Institute of Electrical and Electronics Engineers, New York, pp. 449-456. ISBN 978-142442330-9

Nilda Tri Putri, Nilda Tri Putri and Mohd. Yusof, Sha'ri (2008) Quality engineering in Malaysian and Indonesia automotive related industry- a research agenda. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 17-48. ISBN 978-983-52-0557-4

Noor, Muhamad and Jin, Zhongmin (2006) Computational wear simulation using ratated femoral head on acetabular cup applicable to hard-on hard hip joint replacement. In: Advances in Mechanical Engineering 2006 Part I. UTM, Johor , 1 - 14. ISBN 978-983-52-0544-6

Ochsner, Andreas (2010) Plasticity of three-dimensional foams. In: Cellular and Porous Materials in Structures and Processes. CISM International Centre for Mechanical Sciences, 521 . Springer Vienna, New York, pp. 107-166. ISBN 978-3-7091-0296-1

Omar, Kamaludin and Marghany, Maged and Yaakob, Omar and Zainuddin, Norazimar and Abdul Wahap, Mohd. Arizam (2006) Malaysian ocean data collection using satellite remote sensing. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 25-40. ISBN 978-983-52-0546-0

Osman, H. and Tamin, Mohd. Nasir (2011) Creep deformation characteristics of austenitic stainless steel foils. In: Key Engineering Materials. Trans Tech Publications, Switzerland, 906 -911. ISBN 978-087849210-7

Osman, Kahar and Ali, Zairi and Ubaidullah, S. and Zahid, M. N. (2012) Numerical prediction on the dispersion of pollutant particles. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 65-71. ISBN 978-073541032-9

Osman, Kahar and Md. Sheriff, Jamaluddin and Cupu, D. R. P. (2011) Numerical analysis of line contact elastohydrodynamic lubrication with biobased oils. In: 2011 Fifth Asia Modelling Symposium. IEEE Xplore, Red Hook, NY, pp. 127-132. ISBN 978-1-4577-0193-1

Othman, Muhammad Firdaus and Mat Zin, Ahmad Faiz (2008) Numerical evaluation of spiral counter flow heat tecirculating burner. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, pp. 99-104. ISBN 978-983-52-0541-5

Ourdjini, Ali and Mohamed Ariff, Hanim and Idris, Siti Rabiatul Aisha (2008) Effect of surface finish metallurgy on intermetallic compuands during soldering with tin-silver-copper solders. In: Advances in Mechanical Engineering. Penerbit UTM , Johor. ISBN 978-983-52-0552-1

Pantaleon Su, (2012) Electromagnetic active suspension system (EMS). In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 107-118. ISBN 978-983-52-0816-4

Priyanto, Agoes and Abdul Malik, Adi Maimun and Abdul Ghani, Mohamad Pauzi and Ismail, Nasrudin and Abdul Kader, Ab. Saman (2012) Recurrence wave run up on a large volume semisubmersible. In: Proceedings of the International Offshore and Polar Engineering Conference. The International Society of Offshore and Polar Engineers (ISOPE), California, USA, pp. 942-948. ISBN 978-188065394-4

Priyanto, Priyanto and Usman, Ridzuan and Abdul Hadi, Abdul Hadi (2008) Towing dynamics of a FPSO tanker in calm water a goes. In: Advances In Marine Technology. Penerbit UTM, Johor, pp. 93-104. ISBN 978-983-52-0548-4

Radin Salim, Kamilah and Puteh, Marlia and Mohd. Daud, Salwani (2011) Levels of practical skills in basic electronic laboratory: students' perceptions. In: 2011 IEEE Global Engineering Education Conference (EDUCON). IEEE, USA, pp. 231-235. ISBN 978-161284643-9

Radwan, Ashraf Hafiz (2008) Computer integrated manufacturing systems. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, p. 241. ISBN 978-983-52-0557-4

Rahman , T. A. Z. and Mat Darus, Intan Zaurah (2011) Active vibration control of a flexible plate via active force control strategy. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE Explorer, 001-006. ISBN 978-1-61284-435-0

Raja Ahsan Shah, Raja Mazuir (2008) The development of gray cast iron cylinder block for passenger vehicle. In: Research On Vehicle Technologies. Penerbit UTM, Johor, pp. 105-120. ISBN 978-983-52-0550-7

Raja Hamzah, Raja Ishak and Mba, David (2008) Monitoring lubrication regime during spur gear mesh using acoustic emission (AE) technology. In: Advances in Mechanical Engineering. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0552-1

Rajoo, Srithar and Martines-Botas, Ricardo (2008) Automotive turbocharging. In: Research on Vehicle Technologies. Penerbit UTM , Johor, pp. 1-22. ISBN 978-983-52-0550-7

Ramli, Yahaya (2010) Air compressors. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-1

Ramli, Yahaya (2010) Compressed air distribution. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-3

Ramli, Yahaya (2010) Conditioning of compressed air. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-2

Ramli, Yahaya (2010) Maintenance of compressed air systems. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-4

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saqr, Khalid M. (2012) Comparison of eddy dissipation model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 384-391. ISBN 978-073541032-9

Rosliza, R. and Wan Nik, W. B. and Sudin, Izman (2011) Efficiency comparison of some natural products on corrosion inhibition of Al-Mg-Si alloy. In: Advanced Materials Research. Trans Tech Publications, Germany, pp. 1206-1209. ISBN 978-303785238-5

Ruzairi Abdul Rahim, (2011) Detection of tyre motion prior to beginning of skidding (for abs system). In: Progress in Process Tomography & Instrumentation System: Series 3/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 35-47. ISBN 978-967-354-180-5

S. Aly , Hossam and M. Lazim, Tholudin and A. Eldrainy, Yehia and Mohd Jaafar, Mohammad Nazri (2009) Mathematical modelling of droplet atomization using the population balance equation. In: 2009 International Conference on Signal Processing Systems, ICSPS 2009. Institute of Electrical and Electronics Engineers, New York, 955 -959. ISBN 978-076953654-5

Saad, M. S. and Jamaluddin, Hishamuddin and M. Darus, I. Z. (2011) Active vibration control of flexible beam system using proportional control scheme in finite difference simulation platform. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, 001-005. ISBN 978-145770005-7

Saat, Aminuddin and Dutta, Nilabza and Abdul Wahid, Mazlan (2012) Characterisation of aerosol combustible mixtures generated using condensation process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 109-115. ISBN 978-073541032-9

Sadeghipour, S. and Ghaderian, J. and Abdul Wahid, Mazlan (2012) Advances in aluminum powder usage as an energetic material and applications for rocket propellant. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 100-108. ISBN 978-073541032-9

Said, Mazlan and Abdul Aziz, Azhar and Muhamad Said, Mohd. Farid (2012) Effect of palm methyl ester - diesel blends performance and emission of a single-cylinder direct-injection diesel engine. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 562-570. ISBN 978-073541032-9

Salehuddin Ibrahim, (2012) Vision system based laser pointer for projection screen. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 115-126. ISBN 978-967-354-189-8

Sallehuddin Ibrahim, (2012) Development of omnidirectional mobile robot for robocon 2012. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 135-143. ISBN 978-967-354-188-1

Samian, Yahya and Yaacob, Omar and Tay, Kho Jim (2006) Computer application in Malaysian shipyards. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 1-24. ISBN 978-983-52-0546-0

Samion, Syahrullail and Kamitani, Shunpei and Nakanishi, Kenji (2008) The evaluation of palm oil as lubricant at low temperature. In: Advances in Mechanical Engineering Part II. Penerbit UTM, Johor, pp. 119-136. ISBN 978-983-52-0552-1

Samion, Syahrullail and Yahya, Wira Jazair and Abdul Hamid, Mohd. Kameil and W. N., Fawwaz (2012) Wear characteristic of RBD palm olein using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 991-996. ISBN 978-073541032-9

Saqr, Khalid M. and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin (2012) Highly-resolved large eddy simulation of the nonreacting flow in an asymmetric vortex combustor. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 400-408. ISBN 978-073541032-9

Sashikumar A/L Ram Kumar, (2012) Delivery robot. In: Process Tomography & Instrumentation -Series 8. Penerbit UTM, Skudai, Johor, pp. 55-61. ISBN 978-967-354-189-8

Sashikumar A/L Ram Kumar, (2012) Fire fighting robot. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 67-74. ISBN 978-967-354-188-1

See, Phen Chiak and Wong, Kuan Yew and Komarudin, Komarudin (2008) A technique for improving the max-min ant system algorithm. In: Proceedings of the International Conference on Computer and Communication Engineering 2008, ICCCE08: Global Links for Human Development. Institute of Electrical and Electronics Engineers, New York, 863-866 . ISBN 978-142441692-9

Senawi, Mohd. Yusoff (2008) Numerical determination of efficiency of dry circular fin. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, pp. 99-104. ISBN 978-983-52-0541-5

Shafishuhaza Sahlan, (2012) Multiple senses device for the hearing impaired. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 159-171. ISBN 978-967-354-187-4

Shah Ishak, Iskandar and Mansor, Shuhaimi and Mat Lazim, Tholudin (2008) Helicopter tail shake phenomenon : experimental research. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 97-110.

Shamsudin, Supiah and Ab Rahman, Azmi (2011) Fitting the distributions of wet spell duration with probability models. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, USA, 001-006. ISBN 978-145770005-7

Shamsul, Sarip Model pepejal 3D. In: Lukisan Kejuruteraan dan Berbantu Konputer. Pearson, pp. 1-52.

Sharif, Safian and Mohruni, Amrifan Saladin and Jawaid, Ashraf (2008) Face milling of Titanium Alloy Ti-6246 using PVD-TiN coated carbide tools. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 203-208. ISBN 978-983-52-0557-4

Sharif , Safian and Abd. Rahim, Erween (2006) Evaluation of coating on carbide tool when drilling titanium alloy, Ti-6a14v. In: Advances in Mechanical Engineering 2006 Part I. Penerbit UTM, Johor , pp. 129-141. ISBN 978-983-52-0544-6

Shayganpour, A. and Idris, Mohd. Hasbullah and Sudin, Izman and Farahany, S. (2012) Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1264-1270. ISBN 978-073541032-9

Shiong, Chiew Yeong and Abdul Jalil, Mohamad Kasim and Hussein, Mohamed (2009) Motion visualisation and control of a driving simulator motion platform. In: 2009 6th International Symposium on Mechatronics and its Applications, ISMA 2009. Institute of Electrical and Electronics Engineers, New York, 470 -474. ISBN 978-142443481-7

Shunpei, Kamitani and Kenji, Nakanishi and Syahrullail, S. (2008) Experimantal study of palm oil as lubricant in aluminum alloy forming process. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Sophan Wahyudi Nawawi, (2011) LQR control of a two wheels inverted pendulum mobile robot. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 125-135. ISBN 978-967-354-183-6

Speich, Marco and Rimkus, Wolfgang and Merkel, Markus and Öchsner, Andreas (2009) Large deformation of metallic hollow spheres. In: Materials Science Forum. Trans Tech Publications Ltd., pp. 105-117. ISBN 978-087849320-3

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, M. and Engku Abu Bakar, Engku Mohammad Nazim and Kuan, L. Y. and Khor, E. K. (2011) Effect of pickling process on adhesion strength of Ti oxide layer on titanium alloy substrate. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1621-1630. ISBN 978-087849200-8

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, M. and Engku Abu Bakar, Engku Mohammad Nazim and Nalisa, A. and Konneh, M. (2011) Effect of carburization process on adhesion strength of Ti carbide layer on titanium alloy substrate. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 219-224. ISBN 978-303785035-0

Sudin, Izman and Konneh, , M. and Venkatesh, V. C. (2008) Quantitative evaluation of ductile streaked areas on ground optical glass. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 219-240. ISBN 978-983-52-0557-4

Sudin, Izman and Shayganpour , A. and Idris, Mohd. Hasbullah (2011) Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments. In: Advanced Materials Research. Trans Tech Publications, pp. 422-425. ISBN 978-303785247-7

Supriyo, Bambang and Kamarul, Kamarul (2008) PD control performance for ration control of an EMDAP- CVT. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 23-40. ISBN 978-983-52-0550-7

Syahirah, Syarifah and Osman, Kahar and Redzuan, Kamarul and Ngali, Zamani and Hadi, Nasrul (2012) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 782-788.

Syahrul Hisham Mohamad, (2012) A method of locating harmonic source at common coupling. In: Power Quality Standards and Regulations in Malaysia. Penerbit UTM, Skudai, Johor, pp. 155-189. ISBN 978-967-354-188-1

T., Fiedler and Belova, I. V. and Ochsner, Andreas and G., E. Murch (2010) Review on thermal lattice monte carlo analysis. In: Current Trends in Chemical Engineering. Studium Press LLC, USA, pp. 105-130. ISBN 193-369-975-2

Taib, Iskriza and Osman, Kahar and Abdul Kadir, Mohamed Rafiq and Mahat, Mohd Mazwan (2007) Numerical modelling of abdominal aortic aneurysm. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 77-102. ISBN 978-983-52-0547-7

Tang, Howe Hing and Mailah, Musa (2008) Motion planning and control of a wheeled mobile robot. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 107-128. ISBN 978-983-52-0549-1

Tavakolpour, Ali Reza and Mat Darus, Intan Z. and Mailah, Musa (2009) Modeling and simulation of an active vibration control system for a flexible structure using finite difference method. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Institute of Electrical and Electronics Engineers, New York, 448 -453. ISBN 978-076953648-4

Tavakolpour, Ali Reza and Mat Darus, Intan Zaurah and Mailah, Musa (2008) Performance evaluation of finite difference and finite element methods applied to flexible thin plate for active vibration control. In: ACMOS '08: Proceedings Of The 10Th Wseas International Conference On Automatic Control, Modelling And Simulation. Electrical And Computer Engineering . World Scientific And Engineering Acad And Soc, Athens, Grece, pp. 230-236. ISBN 978-960-6766-63-3

Tawi, Kamarul Baharin and Ariyono, Sugeng and Jamaluddin, Hishamuddin and Hussein, Mohamed and Supriyo, Bambang (2007) Adaptive neural network optimisation control of ICE for vehicle with continuously variable transmission. In: International Conference on Intelligent and Advanced Systems 2007. Institute of Electrical and Electronics Engineering (IEEE), pp. 257-262. ISBN 978-1-4244-1355-3

Vaghefinezhad, Sayedmohammadreza and Wong, Kuan Yew (2012) A genetic algorithm approach for solving group technology problem with process plan flexibility. In: Proceedings - 2012 14th International Conference on Modelling and Simulation, UKSim 2012. IEEE, Cambridge, pp. 52-58. ISBN 978-076954682-7

VilaVandran, Alfred Sagayam and Darus, Amer Nordin (2012) Study of two-dimensional laminar flow in a polar cavity by Ansys Fluent. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 775-781. ISBN 978-073541032-9

Wai, Peng Wong and Kuan, Yew Wong (2010) Intermediate measures consideration for a value chain or multistage system: an efficiency analysis using DEA approach. In: Advances in Measurement Systems. InTech, Rijeka, Croatia, 561-574 . ISBN 978-953-307-061-2

Wong, Kuan Yew and Memary, Reza (2009) An investigation of the expectancy theory elements for motivating employees. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. Article number 5169359 . Elsevier, Singapore, pp. 286-290. ISBN 978-076953653-8

Wong, Kuan Yew and Mirzapourrezaei, S. A. and Lalmazloumian, M. and Dargi, A. (2011) Simulation of a manufacturing assembly line based on WITNESS. In: 2011 Third International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN). IEEE, Bali, pp. 132-137. ISBN 978-076954482-3

Wong, T. T. and Tang, C. H. H. and Mailah, Musa (2012) Robust active heave compensated winch-driven overhead crane system for load transfer in marine operation. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 111-116. ISBN 978-145771967-7

Wong, T. T. and Tang, Collin Howe Hing and Mailah, Musa (2012) Winch driven active heave compensation for load transfer in overhead crane system. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 34-39. ISBN 978-145771967-7

Wong, Yu Cheng and Wong, Kuan Yew and Ali , Anwar (2009) Key practice areas of lean manufacturing. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. Institute of Electrical and Electronics Engineers, New York, 267 -271. ISBN 978-076953653-8

Yaacob , Omar and Abdul Sideek, Mohd. Halim (2006) Ship detection through remote sensing satellite. In: Advances In Marine Technology 2006. Penerbit UTM, Johor , pp. 121-134. ISBN 978-983-52-0546-0

Yaakub, Omar and Tengku Ab. Rashid, Mohd. Ariff and Abdul Mukti, Mohamad Afif (2008) The promise of ocean rebewable energy. In: Advances In Marine Technology. Penerbit UTM, Johor, pp. 1-18. ISBN 978-983-52-0548-4

Yahya, Mohd. Yazid and Wesley, J. Cantwell, and Genevieve, Langdon and Gerald, N. Nurick (2008) The blast response of the panel composites. In: Advances in Mechanical Engineering Part II. Penerbit UTM, Johor, pp. 227-238. ISBN 978-983-52-0552-1

Yeong Shiong, Chiew and Abdul Jalil, Mohamad Kasim and Hussein, Mohamed (2007) Graphical simulation for motion platform design. In: Recent Trends In Systems And Control. Penerbit UTM, Johor, pp. 121-134. ISBN 978-983-52-0545-3

Zakaria, M. Z. and Jamaluddin, Hishamuddin and Ahmad, Robiah and Muhaimin, Abdul Halim (2011) Effects of genetic algorithm parameters on multiobjective optimization algorithm applied to system identification problem. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, USA, 001-005. ISBN 978-145770005-7

Zakuan, Norhayati and Mohd. Yusof, Sha'ri and Mohd. Shaharoun, Awaluddin (2008) TQM, ISO/TS16949 certification and organizational performance in Malaysian automotive industry. In: Advances In Manufacturing And Industrial Engineering. Penerbit UTM, Johor, pp. 49-66. ISBN 978-983-52-0557-4

Öchsner, Andreas and Hosseini, Seyed Mohammad Hossein and Merkel, Markus (2009) Numerical simulation of thermal and mechanical properties of sintered perforated hollow sphere structures (PHSS). In: Iaeng Transactions On Engineering Technologies, Vol 3. AIP Conference Proceedings, 1174 . American Institute of Physics, USA, pp. 16-30. ISBN 978-0-7354-0713-8

Monograph

Ab. Wahab, Abas (2004) Establishing The Wind Map For Sabah and Sarawak, Malaysia. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Roslan and Kamsah, Nazri and Abd. Latif, Zulkarnain (2005) Utilisation of noise suppression techniques in the development of two-stroke, stratified-charge, lean-burn gasoline engines. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Aziz, Azhar and Suhadi, Mohd. Sairaji and Mohd. Noor, Alias and Abdullah, Abu Hassan and Tawi, Kamarul Baharin and Abu Bakar, Rosli (2005) The design and development of a new twostroke (125 Cc) stratified-charge, lean-burn air-cooled engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Rahman, Roslan and Yusof, Mustafa and Tamin, Mohd. Nasir (2009) Development of a truck chassis. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Wahid, Mazlan and Mohd Jaafar, Mohammad Nazri and Ani, Farid Nasir (2006) Studies On The Effect Of Swirl Intensity And Fuel Mixtures On Combustion And Flame Characteristics Of Swirl Burner. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdullah, Haryati and Ani, Farid Nasir and Mohd. Jaafar, Mohammad Nazri (2005) Combustion characteristics study of biomass in a fluidized bed combustor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abu Bakar, Abd. Rahim and Abdul Rahman, Roslan and Md. Zain, Mohd. Zarhamdy and Abd. Ghani, Badri (2009) Evaluation of an automotive wiper noise & vibration characteristics using numerical approach. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abu Bakar, A. R. (2008) Disc Brake Squeal: A Prediction Methodology. Technical Report. Vdm Verlag Dr. Muller.

Ahmad Sabki, Ahmad Fuaad and Ismail, Nasrudin and Abdul Malik, Adi Maimun (1998) Offshore fishing vessel research vessel's repair and operation project. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ani, Farid Nasir (2005) Performance investigation of energy transport media as influenced by crop based properties. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ani, Farid Nasir and Tan, Jaan Soon and Mansor, Muhd. Ridzuan and Yusof, Ahmad Anas (2004) Energy Conversation In Gas Separation Application Using Carbon Absorption & Pressure Swing Adsorption (PSA) System. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Dahalan, Md. Nizam and Mohd Jaafar, Mohd Nazri and Wan Ali, Wan Khairuddin and Mamat, Rizalman and Abd. Ghani, Mohd Shaiful Azman (2003) Determining Potassium Nitrate performance as solid rocket propellant for rocket engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Daud, Mohd Fadzil and Hanafiah, Khairul Anwar and Wan Hussin, Wan Nazdah (2003) Mechanical Design And Fabrication Of A Prototype Motorized Tricycle For The Disable. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hassan, Adnan and Mohd. Shaharoun, Awaluddin and Oktaviandri, Muchamad (2005) Dynamic scheduling in a multi-product manufacturing system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ismail, Yob Saed and Mohd. Sam, Abdul Rahman and Abu Hassan, Shukur (2003) The Study Of Bonding Behavior Between Fiber Reinforced Polymer Composite Plate And Concrete Prism Under Tropical Climate. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Johari, Anwar (2010) Effect of local daily time on the stagnation temperature at the focal point of a parabolic concentrated system. Project Report. Fakulti Kejuruteraan Kimia, Skudai, Johor. (Unpublished)

Kamsah, Nazri and Idris, Mohd. Hasbullah and Phuan, Yoong Jiann (2004) Fe evaluation of thermal property of mould wall material for investment casting and the effect of layers on the hardness of the casting product. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kannan, K. S. and Ab. Wahab, Abas and Abdullah, Haryati and Abdul Latif, Zulkarnain and Hassan, Mohamad Yusri (1998) Cogeneration potential study in food industry. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mailah, Musa and Jamaluddin, Hishamuddin and Mohd. Zain, Mohd. Zarhamdy and Priyandoko, Gigih and Abdul Rahim, Mohammad Akmal Baharain (2006) Development of an extremely robust automotive suspension system using intelligent active force control. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mailah, Musa and Jamaluddin, Hishamuddin and Pitowarno, Endra and Purnomo, Didik Setyo (2005) Intelligent Material Handling Mobile Robot for Industrial Purpose with Active Force Control Capability. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Md. Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Md. Tap, Masine Application of design for assembly (DFA) in small and medium industries (SMI). Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Md. Tap, Masine and Mohamed Shaharoun, Awaluddin and Wan Hussin, Wan Nazdah (2003) Determination of felxible measures in advanced manufacturing system and their effect in productivity and responsiveness. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd Ghazali, Normah and Abd Aziz, Azhar and Rajoo, Srithar and Che Sidek, Aswadi (2006) Environmentally Friendly Refrigeration With Thermoacoustic. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd Ghazali, Normah and Abdul Aziz, Azhar and Abu Bakar, Rosli and Che Sidek, Azwadi (2006) Thermoacoustic Regfrigeration From Waste Heat. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Jaafar, Mohammad Nazri and Azeman, Mustafa and Hamidon, Musa and Wan Zaidi, Wan Omar and Mohd. Zamri, Yusoff and Kamsani, Abdul Majid and Mohamad Shaiful Ashrul, Ishak (2005) Development of Low Liquid Fuel Burner. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Musa, Hamidon and Senawi, Yusof and Wan Omar, Wan Zaidi and Abdul Majid, Kamsani and Mohamad Shaiful Ashrul, Ishak (2005) Pembangunan teknik kawalan pencemaran menggunakan pembakar berbahan api cecair dengan aliran berpusar. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mohd. Jaafar, Mohammad Nazri and Abdul Wahid, Mazlan and Mustafa, Azeman and Ishak, Mohamad Shaiful Ashrul (2005) Combustion characteristic of air staging in gas burner system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Noor, Alias and Abu Bakar, Rosli and Abdul Aziz, Azhar and Abdul Latif, Zulkarnain and Mohd Rohani, Jafri and Saat, Aminuddin (2005) Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Noor, Alias and Abu Bakar, Rosli and Rajoo, Srithar and Ali Sera, Mardani (2003) Design and development of pumps for power plant and cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Yusof, Sha'ri (2002) Total Quality Management (TQM) advancement and critical success factors for implementation in manufacturing Small and Medium Sized Enterprise (SMEs). Project Report. Universiti Teknologi Malaysia, Johor Bahru, Johor. (Unpublished)

Musa, Md Nor (2002) Design And Development Of Rotating-Sleeve Refrigerant Compressor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Musa, Md. Nor and Idris, Mohd. Hasbullah (2007) Development of fuel cell powered automotive thermal comfort and refrigeration system. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Nusyirwan, Istas Fahrurrazi and Dahalan, Md Nizam (2003) Using Composite Materials To fabrication UAV Wing. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Rajoo, Srithar and Mohd Noor, Alias and Abdul Aziz, Azhar (2003) Performance Analysis of Turbocharger Effect on Engine in Local Cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Shamsul, Sarip and A. Rasid, Zainudin and Hassan, Mohd. Zaki (2006) Stress Analysis Of Laminated Composite Plates With Embedded Shape Memory Alloy Using Finite Element Method. Project Report. Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Sharif, Safian and Mohd Yusof, Noordin and Idris, Mohd. Hasbullah and Ahmad, Zainal Abidin and Sudin, Izman and Ripin, Adnan and Mat Zin, Azrul Hisyam (2009) Feasibility Study of Using Vegetable Oil as a Cutting Lubricant Through the Use of Minimum Quantity Lubricant during Machining. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Syahrom, Ardiyansyah Design And Development Of Multistage Symmetrical Wobble Compressor. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Velautham, Sanjayan and Abdul Aziz, Azhar and Mohd Ghazali, Normah (2005) Renewable Energy Powered Organic Ranking Cycle. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Wan Ali, Wan Khairuddin and Abd Rahman, Tharek (2005) Wideband Microstrip Antenna For Land Based Vehicles. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Hamid, Wan Harun and Mohd. Rohani, Jafri (2005) The study on the integration of Activity Based Costing (ABC) system and six-sigma principle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Hussin, Wan Nazdah and Daud, Mohd Fadzil and Abdul Majid, Fadzilah Adibah (2003) Design, Fabricate And Testing Of Stationary Magnetic Stirrer Bar For Uniform Mixing Of Cell Culture. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wong, Kuan Yew (2008) A theoretical model for knowledge management systems adoption in malaysian small and medium enterprises (SMEs). Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Yaakob, Omar and Abdul Malik, Adi Maimun and Samian, Yahya and Fitriadhy, Ahmad (2006) Development Of A Semi-Swath Craft For Malaysian Waters. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yaakob, Omar and Zainudin, Norazimar and Abdul Malik, Adi Maimun and Samian, Yahya and Palaraman, Robiahtul Adawiah (2006) Development Of A Malaysian Ocean Wave Database And Models For Engineering Purposes. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yusof, Mustafa and Abdul Rahman, Roslan (2004) Development of an automotive seat for ride comfort. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

Ayob, Amran (2012) Mechanical behavior of GFRP laminated composite pipe subjected to uniform radial patch load. In: 2nd International Conference on Key Engineering Materials (ICKEM, 2012), 26- 28 February 2012, Singapore.

Syed Hassan , Syed Ahmad Helmi (2013) Improving the layout design of manufacturing company using craft and graph-based method. In: Technology, Education, and Science International Conference.

Syed Hassan , Syed Ahmad Helmi (2013) Inculcating sustainable development among engineering students, part 1: designing problems and learning environments with impact. In: Engineering Education for Sustainable Development.

Syed Hassan , Syed Ahmad Helmi (2013) Inculcating team-based problem solving skills, part 1: enhancing problem solving elements. In: Research In Engineering Education Symposium.

A. K., Mohammed Rafiq and K., Nazri (2007) Primary hip stem stability: the effect of bone pathology on micromotion. In: 2nd International conference on the Mathematical Science 2007, 2007, Johor Bahru.

A. Khalil, Ehab and Khalid, Marzuki and Kekre, H. B. (2003) A switch node architechture for multimedia environment. In: IEEE TENCON '03, 2003.

A. Majid, Norhayati and Mohd. Amin, Shamsudin and Mamat, Rosbi and Horvath, Laszlo (2003) Development of an intelligent perception system for behaviour-based mobil robot. In: International Conference On Robotics, Vision Information and Processing, 2003, Selangor.

A. R., Ariffin (2005) Computer-Aided Reprocessability Indes (CARPI) system for rotational and prismatic parts. In: Seminar Kebangsaan Komputeran Industri, 2005, na.

A. R., Ariffin (2005) Spreadsheet Analysis System (SAS) for the DfA house methodology. In: Seminar Kebangsaan Komputeran Industri, 2005, na.

A. Wahab, A. and Nadzri, M.F. (2003) The study of induced velocity on helicopter main rotor blade. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

A. Wahab, A. and Nor, M. Z. M. and Tan, M. T. and Ismai, M. H. (2003) The design of high-lift foldable wing for low take off speed seaplane. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

A. Wahab, A. and Shamsuddin, R. A. and Halim, M. A. A. and Won, Y. S. (2003) motorised atomiser for aerial crop spraying using microlight. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

A. Wahid, Mazlan and Ujir, Haffis and M. Saqr, Khalid and M. Sies, Mohsin (2009) Experimental study of confined biogas pulse detonation combustion. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT 2009), 2009, Taman Safari, Bogor, Indonesia.

A.Bakar, S. Anuar (2005) Ride performance evaluation of a semi-active magnetorheological suspension system on a full car model. In: 2nd Int. Conf. on Mechatronics (ICOM 05), 2005, Kuala Lumpur.

Ab Kader, Ab. Saman and Oladokun, Sulaiman Olanrewaju and Ahmad, Mohd Zamani (2008) Environmental risk and compliance for nature gas ship design and operation within inland waterways. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ab Wahid, Mastura and Wan Ali, Wan Khairuddin (2009) Design and fabrication of a 200N thrust rocket motor based on NH4ClO4 + Al + HTPB as solid propellant. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Abd Aziz, Azhar and Mohd. Ghazali, Normah and E. M., Tokit (2010) Wood combustion behaviour in a fixed bed combustor. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Abd Ghani, Rasli (2013) Advance devices using piezoelectric harvesting energy. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16 -17 December 2013, Putrajaya, Malaysia, 2013.

Abd Jalil, Mohamad Kasim and Kang, Hooi Siang and Mailah, Musa (2006) Fixed-base driving simulator for vehicle and transportation research. In: Malaysian Universities Transport Research Forum Conference 2006, 2006, UKM.

Abd Kader, Ab Saman (2004) Professional Engineer’s Roles and Responsibility. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abd Kader, Abd Saman (2013) Comparative throughput forecast models on container terminal equipment planning. In: The International Conference on Marine Safety and Environment (2013).

Abd Kadir, Mohammed Rafiq and M. Y., Baharuddin (2010) Finite element study on the micromotion of cementless total hip arthroplasty. In: IFMBE Proceedings, 2010, Singapore.

Abd Kadir, Mohammed Rafiq and M. Y., Baharuddin (2010) Finite element study on the stability of cementless acetabular cup. In: IFMBE Proceedings, 2010, Singapore.

Abd Rahim, Abu Bakar and Abd Hamid, Mohd. Kameil and Dzakaria, Afandi and Abd Ghani, Badri (2006) Predicting wear and squeal noise of a disc brake assembly using the finite element method. In: 3rd Malaysian Brake Friction Materials colloquium (MBFMC 2006), 2006, Perak.

Abd. Kader, Ab. Saman and Ramasamy, Arulmaran (2003) Integrated inland water transportation system for Klang Valley. In: Malaysian Science And Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abd. Kader, Ab. Saman (2003) Freshwater management in relation to inland water transport activies. In: International Freshwater Management Conference And Exhibition, 2003, Kuching, Sarawak.

Abd. Kader, Ab. Saman (2005) A hovercraft design for military operation-UTM experience. In: Int. Conf. on Defence Technology 2005, 2005, UTM, Skudai, Johor.

Abd. Kader, Ab. Saman (2012) Optimising expansion control on quay crane deployment in container termal. In: 8th International Conference On Marine Technology (MARTEC 2012), 20-22 October, 2012, Kuala Terengganu, Malaysia.

Abd. Kader, Ab. Saman and Abdul Malik, Adi Maimun and Abdul Ghani, Muhamad Pauzi (2012) Risk and reliability analysis study of offshore aquaculture ocean plantation system. In: 8th International Conference on Marine Technology 2012(MARTEC), 20-22 October, 2012, Terengganu, Malaysia.

Abd. Kader, Ab. Saman and Sinha, R. P. and Ahmad, Mohd. Zamani and Olanrewaju, Oladokun Sulaiman and Seng, Lim Yew (2007) Utilization of simulation for training enhancement. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Abd. Kader, Ab. Saman and Wan Shamsuri, Wan Nurulhuda (2012) Optimising efficiency in cargo-handling operation in port. In: APEX 2012 - Optimizing Efficiency In Cargo Handling Operation In Port, Nov.6 - Nov.7, 2012, Kuala Lumpur, Malaysia.

Abd. Kader, Ab. Saman and Ahmad, Mohd. Zamani (2006) Utilisation of inland water transport system in South East Asian region - an overview of the prospect. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abd. Kader, Ab. Saman and Idris, Jamaliah and Abdul Mukti, Mohd. Afifi and Ahmad, Mohd. Zamani (2006) Vehicle equipment selection model for preliminary design using fuzzy multi-criteria decision making method. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abd. Kader, Ab. Saman and Suleiman, Oladokun (2006) Sustainable periodic navigation channel assessment initiative for restricted inland waterway. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abd. Latif, Ainullotfi and Tamin, Mohd. Nasir and Koloor, S. S. R. (2010) Mechanics of composite delamination under flexural loading. In: 8th International Confernec on Fracture and Strength of Solids, 7-9 June 2010, Kuala Lumpur.

Abd. Malik, Adi Maimun and Jameei, Saeed and Priyanto, A. and Sidik, N. A. C. (2010) Influence of twin hull geometry  on aerodynamics characteristics of WIG Catamaran duing ground effect. In: WSEAS, Application of Computer engineering, 23-25 March. 2010, Pulau Pinang.

Abd. Malik, Adi Maimun and Priyanto, Agoes and Scully, C. S. (2010) Effect of fins on manoeuvrability of A LNG vessel. In: The 5th Asia Pacific Workshop on Marine Hydrodynamics (APHydro 2010), 1-4 July 2010, Osaka Prefecture University, Osaka, Jepun.

Abd. Mukti, Mohd. Afifi and Tawi, Kamarul Baharin and Yaakob, Omar and Nasirudin, Ahmad and Abd. Ghani, Mohd. Pauzi and Mat Lazim, Tholudin (2006) An environmental friendly leisure boat. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak (2012) Measurement of noise inside the compartment and vibration on both sides of elastomeric mounts of passenger car. In: 4th International Conference on Noise, Vibration and Comfort (NVC2012), 26-28 November, 2012, Kuala Lumpur, Malaysia.

Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak (2012) Measurement of vibration power flow through elastomeric powertrain mounts in passenger car. In: 4th International Conference On Noise, Vibration and Comfort (NVC2012), 26-28 November, 2012, Kuala Lumpur, Malaysia.

Abd. Wahab, Abas and Jungan, Jawan and Songip, Ahmad Rahman (2003) Capacity building in aeronatics. In: National Sympossium on Science and Technology , 2003, Palace of the golden Horses, The Mines Resort City. Selangor.

Abd. Wahab, Norhaliza and Katebib, Reza and Balderudc, Jonas and Rahmat, M. Fuaad (2010) Data-driven adaptive model-based predictive control with application to wastewater systems. In: IET Control Theory & Applications, 2010, n/a.

Abd.Kader, Ab.Saman and Sinha, R. P. and Ahmad, Mohd. Zamani and Olanrewaju, Oladokun Sulaiman (2007) Marine engineering as future career for Malaysians. In: 2nd Regional Conference on Engineering Education , 2007, Johor Bahru.

Abd.Rahim, Abd.Rahman and Nabi Baksh, Mohd Shariff (2003) Critical succes factors and conceptual framework for new product development for engineer to order company. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Abdel Razak, Yasser Mohamed Ahmed (2013) Numerical study on hydrodynamic resistance of new hull design for multipurpose amphibious vehicle. In: 2nd Inernational Conference on Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013), 2013.

Abdol Rahman, Mohd. Nasrull and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri (2012) Psychometric properties of the workplace ergonomic risk assessment (WERA) method. In: 2nd International Conference Southeast Asian Network of Ergonomics Societies (SEANES'12), 9-13 July, 2012, Langkawi, Malaysia. (In Press)

Abdul Awal, A. S. M. (2013) Creep and drying shrinkage of concrete containing high volume palm oil fuel ash. In: Proceedings of The 4Th International Conference of European Asian Civil Engineering Forum 2013 (Eacef 2013).

Abdul Aziz, Azhar and Ali, Mas Fawzi (2006) Conceptual development of a pressure-swirl injector for a two-stroke GDI engine. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Abdul Aziz, A. and Abdul Latiff, Z. and Mohd Ali, M. Fawzi and Mohammad Said, M. Farid and Said, M. (2006) Enhancing the performance of a 125 cc single-cylinder, aircooled, gasoline two-stroke engine. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Abdul Aziz, Azhar Controlled Auto-Ignition (CAI) combustion in a two-stroke cycle engine using hot burned gases. In: UNSPECIFIED.

Abdul Aziz, Azhar (2013) The effects of maintaining constant engine air intake temperature on its performance and emissions. In: 12th International Conference on Sustainable Energy Technologies (SET-2013) 26-29Th August, 2013 Hong Kong, 2013, Hong Kong.

Abdul Aziz, Azhar (2012) R22 and various mixtures of R2901R600a as its alternative in adiabatic capillary tube used in split-type air-conditioning system. In: The 5th International Meeting on Advances in Thermo-Fluids (IMAT), Bintan Island, Indonesia, 2012.

Abdul Aziz, Azhar (2012) Simulation of alternative refri gerant characteristics using artificial neural network in air-conditioning system. In: 3rd International Conference on Construction Industry (ICCI) 2012, 10-11 April, 2012, Sumatera Barat, Indonesia.

Abdul Aziz, Azhar and Ali, Mas Fawzi and Abdul Latiff, Zulkarnian (2009) Transient flow effect due to geometrical characteristics of pressure-swirl gasoline direct injection (GDI) atomizers. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Abdul Aziz, Azhar and Awang, Mohamad Afiq (2006) Investigation of nox emission of a neat neutralised palm oil methyl ester using a single cylinder direct-injection engine. In: Proceedings of the JSPS-VCC Group Seminar 2006 Natural Resources and Energy Environment, 2006, Skudai, Johor.

Abdul Aziz, Azhar and Mohd. Nasir, Zakaria and Mat Yamin, Ahmad Kamal (2003) Compound-Piston, two-stroke multi-cylinder (500cc) lean burn engine. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Abdul Aziz, Zainal (2013) Crashworthiness of frontal longitudinal of Rain Forest Vehicle (RFV). In: 4th International Graduate Conference on Engineering, Science and Humanities.

Abdul Aziz, Azhar and Said, Mohd Farid and Awang, Mohamad Afiq and Said, Mazlan (2006) The effects of neutralized palm oil methyl esters (NPOME) on performance and emission of a direct injection diesel engine. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abdul Ghani, Mohamad Pauzi (2012) A definite integral solution of ship wave resistance for twin-hull ships. In: World Maritime Technology Conference (WMTC2012), 2012.

Abdul Ghani, Mohamad Pauzi (2012) Experimental analysis of podded propulsor on Multi Purpose Command Support Ship (MPCSS). In: 10th International Conference on Hydrodynamics (ICHD 2012), 2012.

Abdul Ghani, Mohamad Pauzi and Ismail, Nasrudin (2012) Riser VIV suppression device test. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3-5 September, 2012, Johor, Malaysia.

Abdul Hamid, Mohd. Foad Application of probability and statistics in constructing likelihood of failure bands for RBI approach in structural integrity management. In: UNSPECIFIED.

Abdul Hamid, Mohd. Kameil (2012) Effects of external hard particles on brake noise of disc braking system. In: The 5th International Meeting on Advances in Thermofluids 2012, 12-13 November 2012, Island of Bintan, Indonesia.

Abdul Kader, Ab Saman (2012) Optimising expansion control on quay crane development in container terminal. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Abdul Kadir, Mohammad Rafiq and Che Iberahim, Nazman and Ong, Rui Ying (2007) Finite element analysis of a total ankle arthroplasty during the stance phase of gait. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 2007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Kamsah, Nazri and Ong, Rui Ying and Saharudin, Mohd. Fairoz (2007) Biomechanical analysis of semiconstrained and unconstrained elbow replacements. In: International Conference of Ergonomics 2007 (ICE 2007), 2007, Penang.

Abdul Kadir, Mohammad Rafiq and Kamsah, Nazri and Ong, Rui Ying and Salim, Muhsin (2007) Interfacial conditions of cementless acetabular cup prostheses under physiological load. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 2007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Ong, Rui Ying (2007) Mechanical behaviour of the mandible after rigid fixation of mandibular angle fractures. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Osman, Kahar and Taib, Iskhrizat (2007) Finite element of expandable intravascular stent used in treatment of aneurysm. In: 2nd European Conference On Antennas And Propagation, December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Wan Harujan, Wan Mohd. Musyris (2007) Biomechanical analysis of fusion and implantation of two vertebrae. In: World Engineering Congress 2007, 2007, Penang.

Abdul Kadir, Mohammed Rafiq (2007) The effect of malalignment and undersizing on primary stability of cementless femoral stems. In: World Engineering Congress 2007, 2007, Penang.

Abdul Kadir, Mohammed Rafiq (2012) Effects of Zn and Ca additions on the solidification behavior and microstructure analysis of Mg and Mg-6Zn alloys. In: The International Conference on Agricultural, Food and Biological Engineering (ICAFBE 2012), 11-13 Mei 2012, Guangzhou, China.

Abdul Kadir, Mohammed Rafiq and Abd. Aziz, Azian and Arezoodar, Ali Fallahi and Hussain, Fitriyah and Zulkifly, Ahmad Hafiz and Sa'at, Azlin (2010) Preliminary study on the design of high flexion knee implant for total knee arthroplasty for Malaysian population. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Alizadeh, Mina and Salanha, Saturnino and Baharudin, Azmi and Abdul Razak, Mohammad (2010) Biomechanical simulation of burst fracture of l1 with thoracolumbar rods and screws. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Kadir, Mohammed Rafiq and Hussain, Fitdriyah and Zulkifly, Ahmad Hafiz and Sa'at, Azlin and Abd. Aziz, Azian (2010) Anthropometric measure of the development of implants for total knee arthroplasty. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Idrose, Al Hamzee (2007) Performance of glenoid prostheses in a conventional glenohumeral joint athorplasty. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Idrose, Al Hamzee (2007) Primary stability of conventional glenoid component for shoulder arthroplasty. In: World Engineering Congress 2007, 2007, Penang.

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Aminullah, Muhammad Azuwan (2007) Finite element simulation of proximal interphalangeal joint implats. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 2007, Kuala Lumpur.

Abdul Kadir, Mohammed Rafiq and Mohd. Idris, Mohd. Norshahid (2007) Influence of occlusal loads on stress distribution of dental implants. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Mohd. Idris, Mohd. Norshahid and Che Ibrahim, Nazman (2007) Evaluation of load transfer characteristics of double-taper interlocking abutment for prosthetic dentistry. In: World Engineering Congress 2007, 2007, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Mohd. Shah, Nur Syahirah and Jamli, Norsafikah (2007) Corrosion behavior of Ti6Al4V, CoCrMo alloy and SS316L under different simulated body fluid environment. In: National Metallurgical Conference, 2007, The Putri Pacific Hotel. Johor Bahru, Johor.

Abdul Kadir, Mohammed Rafiq and Raja Izaham, Raja Mohd. Aizat and Abdul Rashid, Abdul Halim (2010) Stability evaluation of wedge plate and tomofix plate for open wedge high tibial osteotomy. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Kadir, Mohammed Rafiq and Raja Izaham, Raja Mohd. Aizat and Al-Jefri Muslim, Darhaysham (2010) Biomechanical analysis of locking compression plate (lcp) for fracture fixation of tibial oblique fracture. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah and Rais Yusof, Mohd. Azrul (2007) Microstructural damage of cancellous bone under uniaxial compression. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammed Rafiq and Syhrom, Ardiyansyah (2007) The effects of tibial component malalignment on stress transfer and stability. In: International Conference of Ergonomics 2007 (ICE 2007), 2007, Kuala Lumpur.

Abdul Kadir, Mohammed Rafiq and Taib, Ishkrizat and Kamsah, Nazri and Osman, Kahar (2007) Computational analysis of a stented abdominal aortic aneurysm model. In: World Engineering Congress 2007, 2007, Johor Bahru.

Abdul Latif, Ainullotfi and Ammoo, Mohd. Shariff and Mohd. Jaafar, Mohammad Nazri (2007) The effect of changing the medium of instruction on the performance of aeronautical engineering students. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru, Johor.

Abdul Latif, Ainullotfi and Ammoo, Mohd. Shariff and Mohd. Jaafar, Mohammad Nazri and Dahalan, Md. Nizam and Abdul Rahman, Roslan and Abdul Aziz, Azhar (2007) Students' perceptions on the use of english as the medium of instruction for mechanical engineering programs. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Abdul Latif, Ainullotfi and Ayob, Amran and Kamsah, Nazri and Ahmad, Zaini and Tamin, Mohd. Nasir (2012) Finite element modeling of sheet metal forming process. In: International Conference on Applications and Design in Mechanical Engineering 2012, 27-28 February 2012, Penang, Malaysia.

Abdul Latif, Ainullotfi (2013) Flutter of composite wing by finite element analysis. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) 2-4 July 2013, Kuala Lumpur.

Abdul Latiff, Zulkarnain Design a four-stroke Homogeneous Charge Compression Ignition (HCCI) engine. In: UNSPECIFIED.

Abdul Latiff, Zulkarnain The effect of fuel additives on gasoline heating value and spark ignition engine performance: case study. In: The 5th IMAT International on Advances in Thermo-fluids.

Abdul Latiff, Zulkarnain (2013) Evaluation of a compression ignition engine performance, emission and in-cylinder characteristics using Water In Diesel Emulsion (WIDE) Fuel For S.I.T Schiffs & Industry Technic (M) Sdn. Bhd. In: n/a, 2013.

Abdul Latiff, Zulkarnain (2013) Experimental study on the performance of in-cabin ventilation system. In: International Conference On Mechanical Engineering ICOME 2013, 2013.

Abdul Latiff, Zulkarnain (2012) Experimental study on the replacement of HFC-R134a by hydrocarbons in automotive air conditioner. In: The 5th IMAT International on Advances in Thermo-fluids, 2012.

Abdul Malek, Zulkurnain and Mirazimi, S. J. and Mehranzamir, Kamyar and Salimi, Behnam (2012) Effect of shunt capacitance on ferroresonance model for distribution voltage transformer. In: 2012 IEEE Symposium on Industrial Electronics and Applications (ISIEA 2012), 23-26 September 2012, Bandung, Indonesia.

Abdul Malik, Adi Maimun (2012) Bow diving of semi-swath vessel in following seas and fins stabilizer effect. In: Proceedings of the 11th International Conference on the Stability of Ships and Ocean Vehicles 23-28 September 2012, Athens, Greece, 2012.

Abdul Malik, Adi Maimun The effects of bank and shallow water on the flow pattern around hull of LNG carrier using CFD. In: 14th Marine Industries Conference (MIC2012).

Abdul Malik, Adi Maimun (2012) Establishment of ship collision avoidance in the Malacca Straits based on AIS data. In: JASNAOE Autumn Conference 2012, 26-27 November 2012, Kashiwa Japan.

Abdul Malik, Adi Maimun (2006) The Malaysian marine industry - current trend and prospects of research and development in marine technology. In: Proceedings of International Seminar on Marine Transportation Engineering 2006, 2006, Jakarta, Indonesia.

Abdul Malik, Adi Maimun (2013) Overview of research on vortex induced vibration of marine riser. In: The International Conference on Marine Safety and Environment, 12-13 November 2013, (IMSE 2013), 2013, Johor Bahru, Malaysia.

Abdul Malik, Adi Maimun (2013) Prediction of hydrodynamics coefficients for autonomous underwater vehicle. In: International Marine Safety and Environment 2013, 2013.

Abdul Malik, Adi Maimun (2007) Rekabentuk dan teknologi pebinaan kapal di Malaysia- dahulu dan sekarang. In: Seminar Teknologi Pembuatan Tradisional, 2007, Kuala Terengganu.

Abdul Malik, Adi Maimun (2013) Riser VIV suppression device tests for application to a southeast asia TLP. In: Proceedings of the ASME 2013 32nd International Conference on Ocean, offshore and Arctic Engineering OMAE2013, 2013.

Abdul Malik, Adi Maimun (2012) Safety measure and cost benefit assessment for ship collision in the Malacca straits using AIS data. In: JASNAOE Spring Conference 2012, 17-18 May , 2012, Tokyo.

Abdul Malik, Adi Maimun (2013) Seakeeping of semi-swath using fin stabilizer with fuzzy logic controller in following seas. In: The International Conference on Marine Safety and Environment 2013 (IMSE 2013), 2013.

Abdul Malik, Adi Maimun (2013) Stability of a compound wing configuration during ground effect. In: The International Conference on Marine Safety and Environment, 2013, Johor Bahru, Malaysia (IMSE 2013), 2013, Johor Bahru, Malaysia.

Abdul Malik, Adi Maimun and Ahmed Abdel Razak, Mohamed Yasser (2012) Take off resistance estimation of Wing In Ground Effect (WIG) craft. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3-5 September, 2012, Johor Bahru, Malaysia.

Abdul Malik, Adi Maimun and Ahmed Abdel Razak, Yasser Mohamed (2012) Fundamentals of vortex induced vibration analysis of merine riser. In: The 6 th Asia - Pacific Workshop on Marine Hydrodymics - APHydro 2012, 3-5 September 2012, Johor, Malaysia.

Abdul Malik, Adi Maimun and Bodaghi, B. and Samad, A. R. and Ketabdari, M. J. (2009) Six-degrees of freedom motions of a spar platform in irregular waves. In: International Conference on Floating Structures for Deepwater Operations , 2009, University of Strathclyde, Glasgow, Scotland.

Abdul Malik, Adi Maimun and Jaswar, Jaswar and Abdul Ghani, Muhamad Pauzi (2012) Semi submersible mesh number effect on time required and accuracy of motion. In: Proceedings 8th International Conference on Marine Technology (MARTEC 2012), 20-22 October, 2012, Terengganu, Malaysia.

Abdul Malik, Adi Maimun and Jaswar, Jaswar and Abdul Ghani, Mohamad Pauzi (2012) Effect of mesh number on accuracy of semi submersible motion prediction. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3rd - 4th September 2012, Johor, Malaysia.

Abdul Malik, Adi Maimun and Muhammad, A. H. and Priyanto, A. and Yaacob, O. (2006) Effect of spray-stake on manoeuvring performance of a planing hull. In: International Conference High Speed Craft, ACV's, WIG's and Hydrofoils, 2006, London, England.

Abdul Malik, Adi Maimun and Muhammad, A. Haris and Priyanto, Agoes and Yaacob, Omar (2006) Experimental study on manoeuvring characteristics of a planing hull. In: Regional Postgraduate Conference on Engineering and Science, 2006, Johor Baru, Johor.

Abdul Malik, Adi Maimun and Nakisa, Mehdi and M Ahmed, Yasser and A.Y., Sian and A., Priyanto and Jaswar, Jaswar and F., Behrouzi (2013) RANS simulation of the viscous flow around hull of LNG. In: The 15th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '13), 2013.

Abdul Malik, Adi Maimun and Nakisa, Mehdi and Mohamed Ahmed, Yasser and Priyanto, Agoes and Koto, Jaswar and Behrouzi, Fatemeh and Ghazanfari, Seyed Alireza (2013) Ship bank interaction effect on soil erosion. In: The International Conference on Marine Safety and Environment 2013 (IMSE 2013), 2013.

Abdul Malik, Adi Maimun and Priyanto, Agoes and Muhammad, A. Haris (2006) Captive model tests of pusher-barge in deep and shallow water. In: 11th Seminar of JSPS-DGHE Core University Program on Marine Transportation Engineering, 2006, Hiroshima, Japan.

Abdul Malik, Adi Maimun and Priyanto, Priyanto and Agoes, Agoes and Rahimuddin, Rahimuddin and Samad, Samad and Ahmad, Baidowi and Nurcholis, Nurcholis (2009) Ship manoeuvring in shallow water with ship-bank interaction effects. In: International Conference on Ship Manoeuvring in Shallow and Confined Water , 2009, Antwerp, Belgium.

Abdul Malik, Adi Maimun and Setyawan, Dony (2006) Dynamic assessment of a high speed passenger ferry in damage condition. In: The Third Asia-Pacific Workshop on Marine Hydrodynamics, 2006, Shanghai Jiao Tong University, Shanghai China.

Abdul Malik, Adi Maimun and Yaakob, Omar and Priyanto, Agoes (2007) Effect of spray-strake on manoeuvring performance of a planing hull. In: 2007 China International Boat Show & HPMV Conference, 2007, Shanghai.

Abdul Mukti, Mohamad Afifi and Mohd. Noor, Fatimah (2004) Engineering education - the hidden agenda. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abdul Mukti, Mohamad Afifi (2005) Aerodynamic study of Malaysian SME MD3 light aircraft. In: CEIAT Int. Conf. on Innovation and Integration in Aerospace Science, 2005, Johor Bahru.

Abdul Rahim, Abd Rahman (2012) An overview of fruit supply chain in Malaysia. In: First International Conference on Engineering Business Management Proceedings, 2012.

Abdul Rahim, Abdul Rahman (2012) Towards successful Total Productive Maintenance (TPM): how well the management commitment being assessesed? In: International Conference On Management, Economics And Finance (ICMEF 2012) Proceeding , 2012.

Abdul Rahman, Abdul Halim (2013) A simple method of designing low temperature freezer using double stage refrigeration system for small capacity. In: 12th International Conference on Sustainable Energy Technologies, 2013.

Abdul Rahman, Roslan (2005) Muffler design for newly developed two-stroke single cylinder compound piston gasoline engine. In: 11th Asia-Pasific Vibration Conference, 2005, Langkawi, Malaysia.

Abdul Raman, Norazmein (2013) Design of ultrasonic compaction tool for powder metallurgy. In: 4th International Conference on Mechanical and Manufacturing Engineering.

Abdul Rani, Mat Rebi (2013) Association between workers perception and their level of satisfaction with their working environment. In: UNSPECIFIED, 2013.

Abdul Rani, Mat Rebi (2013) Backpain prevalence and backpack culture among Malaysian schoolchildren. In: Human Factor Ergonomic Society of Malaysia, 2013 Conference.

Abdul Rani, Mat Rebi (2013) Development of road safety model for Malaysian road. In: UNSPECIFIED, 2013.

Abdul Rani, Mat Rebi (2003) Managing ergonomics reisk factors at workplace. In: 6th National Conference & Exhibition On Occupational Safety & Health, 2003, China National Convention Center (CNCC).

Abdul Rani, Mat Rebi (2013) Relationship between working postures and msd in different body regions among electronics assembly workers. In: 2013 IEEE international Conference on industrial Engineering & Engineering Management, 10-13 Dec, 2013, 2013, Bangkok, Thailand.

Abdul Rani, Mat Rebi (2003) Roles of the mangement and safety committee in the implementation of safety management system in industries. In: Seminar On Occupational Safety & Health, 2003, Hotel Selesa. Pasir Gudang, Johor.

Abdul Rani, Mat Rebi (2012) WERA tool for assessing exposure risk factors of work related musculoskeletal disorders. a reliability and validity study. In: 3rd International Conference on Industrial Engineering & Operations Management, 2012.

Abdul Rani, Muhamad Norhisham (2013) Model updating for a thin steel sheet welded structure. In: 20th International Congress on Sound & Vibration, 2013.

Abdul Razak, Ariffin (2013) Cellular manufacturing system for machine part cell formation and operation sequencing. In: 1st international Materials, industrial, and Manufacturing Engineering Conference,2013, 2013, Johor Bahru, Malaysia.

Abdul Razak, Ariffin and Chong, T. S. (2006) Development of the prototype system for DFA using boothroyd-dewhurst DFA methodology. In: Conference On manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Abdul Razak, Ariffin and Mohd. Saad, Rozami and Ooi, Chuon Yuen (2006) Feature based design approach for reprocessability index (RPI) evaluation. In: National Conference On Design and Concurent Engineering 2006 (DECON 2006), 2006, KUTKM.

Abdul Talib, Hayati @ Habibah (2012) Quality management effectiveness in Malaysia: a conceptual model for electronics manufacturing services industry. In: IEEE Symposium on Business, Engineering and Industrial Application (ISBEIA 2012), 2012.

Abdul Wahid, Mazlan and Ujir, Mohd Hafis and M.S, Mohsin (2008) Impulse Measurement of Pulse Combustion Tube using Accelerometer. In: 9th Asia-Pacific International Symposium on Combustion and Energy Utilization, November 2008, Beijing, China.

Abdul Wahid, Mazlan (2013) Characterization of flameless combustion of natural gas in laboratory scale furnace. In: The 6th International Meeting on Advances on Thermofluids, National University of Singapore, Singapore, 22-23 November 2013..

Abdul Wahid, Mazlan (2005) Effect of the bluff-body on the stabilization regime of premixed. In: 4th Int. Conf. on Heat Transfer, Fluid Mechanics and Thermodynamics, 2005, Cairo, Egypt.

Abdul Wahid, Mazlan (2012) Environmental protection and fuel comsumption reduction by flameless combustion technology: a review. In: 12-13 November 2012 :5th International Meeting on Advances on Thermofluids, Bintan Island, Indonesia, 2012.

Abdul Wahid, Mazlan (2012) Pulse detonation engine research development at high speed reacting flow laboratory, Universiti Teknologi Malaysia. In: 12-13 November 2012 :5th International Meeting on Advances on Thermofluids, Bintan Island, Indonesia, 2012.

Abdul Wahid, Mazlan and Abu Bakar, M. N. (2006) Bluff body effect on the stabilization of premixed flame. In: Eighth Asia-Pacific International Symposium on Combustion and Energy Utilization, 2006, Sochi, Russian Federation.

Abdul Wahid, Mazlan and Ardani, Mohd. Ibthisham (2010) Characteristics of impinging reacting jet flow on flat surface. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Cheah, C. P. and Kahar, O. and Chuah, Y. C. (2006) Analytical and numerical study of cross-corrugated surface annular wrap around recuperator. In: International Conference on Energy and Environment 2006, 2006, Bangi, Selangor.

Abdul Wahid, Mazlan and Dairobi, Ahmed G. and Saat, Aminuddin and Mohd. Sies, Mohsin and Mohammed, Hussein A. and Darus, Amer Nordin and Hasan, Mohd. Faizal and Mohd. Ibthisham, Ardani and Mohd. Yasin, Mohd. Fairus (2013) Pulse detonation engine research development at high speed reacting flow laboratory - hiref, Universiti Teknologi Malaysia. In: Applied Mechanics And Materials.

Abdul Wahid, Mazlan and M. Z., Ahmad Faiz and M. Saqr, Khalid and U., Haffis (2010) Single pulse detonation study of natural gas. In: Fluids Mechanics and Heat & Mass Transfer 2010, 22-27 July 2010, Corfu Island, Greece.

Abdul Wahid, Mazlan and M. Z. A., Faiz (2010) Swirling lean-premixed reacting flow. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and M. Z. A., Faiz and B., Rosnadiah (2010) The cellular structure of LPG reacting fluid. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and M. Z. A., Faiz and M., Norzawani (2010) Stabilization of reacting fluid by bluff body. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Mohd. Haffis, U. and Ammar, Z. (2006) Characteristic study of hydrocarbon fuel pulse combustion. In: International Conference on Energy and Environment 2006, 2006, Bangi, Selangor.

Abdul Wahid, Mazlan and Mohd. Sies, Mohsin (2010) Experiments on combustion kernel growth in gaseous explosions. In: 10th Asian International Conference On Fluid Machinery, 21–23 October 2009, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and M. H., Ujir and H., Afifi (2010) Suitability of using the accelerometer for impulse measurement of a pulse combustion tube. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Nasser, A. and Mohd. Haffis, U. (2006) Premixed flame characteristics on rotating bunsen burner of various nozzle geometries. In: Proceedings of the JSPS-VCC Group Seminar 2006 , 2006, Skudai, Johor.

Abdul Wahid, Mazlan and Saqr, Khalid M. and Faiz, Ahmed and Kassem, Hassan and Sies, Mohsin (2010) Transient characteristics of C3H8/O2 turbulent mixing in a hypersonic pulse detonation engine. In: The 9th WSEAS International Conference on Applications of Computer Engineering (ACE 10), 23-25 Mac 2010, Bayview Beach Resort, Pulau Pinang.

Abdul Wahid, Mazlan and Shamsul Bahar, M. A. and Mohd. Haffis, U. (2006) Effect of oxygen addition on non-premixed flame. In: Proceedings of the JSPS-VCC Group Seminar 2006 , 2006, Skudai, Johor.

Abdul Wahid, Mazlan and Ujir, M. H. and Zahar, A. (2006) Pulse combustion of hydrocarbon fuel. In: Eighth Asia-Pacific International Symposium on Combustion and Energy Utilization, 2006, Sochi, Russian Federation.

Abdul Wahid , Mazlan (2013) Experimental investigation of flameless combustion in a laboratory scale apparatus. In: 12th Asian International Conference On Fluid Machinery (12th AICFM, 2013), 25th-27th September 2013, 2013, Hotel Santika Premiere Yogyakarta,Indonesia.

Abdul-Latif, Ainullotfi and Ahmad, Zair Asrar and M., Ardiyansyah Syahrom (2006) Effect of side force on the structural integrity of the new symmetrical multistage wobble-plate compressor. In: Proceedings of the Sixth Regional Conference on Computational Mechanics and Numerical Analysis, 2006, Banda Aceh, Indonesia.

Abdul-Latif, Ainullotfi and Musa, Md. Nor and Wan Mat, Wan Ali and Syahrom, Ardiyansyah (2006) Suction and discharge flow analysis in new multi-stages symmetrical wobble plate compressor. In: Sixth Regional Conference on Computational Mechanics and Numerical Analysis, 2006, Banda Aceh, Indonesia.

Abdul-Latif, Ainullotfi and Zainuddin, Mohd. Zul Atfi and Abu-Hassan, Shukor (2006) Finite elements analysis and experimental tests on UTM composite bridge. In: Proceedings of the Sixth Regional Conference on Computational Mechanics and Numerical Analysis, 2006, Banda Aceh, Indonesia.

Abdullah, Hayati (2005) The effect of air stafing on the gaseous emissions in a fluidized bed combustor. In: APCSEET 2005, 2005, Tidak Berkaitan.

Abdullah, Hayati and Mohd. Jaafar, Mohammad Nazri, and Ani, Farid Nasir (2003) Low emission incinerator by staged combustion. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Abdullah, Mohamed Ruslan (2013) Flexural and tensile behavior of kenaf fiber composite materials. In: International Conference on the Science and Engineering of Materials (ICoSEM 2013).

Abdullah, Mohd. Yunus (2012) Intelligent active force controller for an anti-lock brake system application. In: Proceeding of the 1st International Conference on Systems, Control, Power, Robotics (SCOPORO'12) Singapore, May 11-13, 2012 , 2012.

Abdullah, Muhamad Adlan and Salema, Arshad and Ani, Farid Nasir (2012) Deposit forming tendency of biodiesel and diesel fuel due tohigh pressure exposure. In: 5th International Meeting on Advances in Thermofluids (IMAT) 2012, 12 – 13 November 2012, Bintan Island, Indonesia.

Abdullah, Redzuan (2012) Modelling of shear bond with cohesive element and slenderness study of composite slabs. In: Asia Pacific Structural Engineering and Construction Conference (APSEC 2012), 2012.

Abdullah , Hayati (2013) Exhaust gas-superstructure interactions onboard ships with side exhaust. In: Encon 2013, 6th Engineering Conference, "Energy and Environment".

Abdullah , Mohamed Ruslan (2013) Indentation fracture behaviour of fibre metal laminates based on kenaf/epoxy. In: International Conference on Mechanical Engineering Research (ICMER 2013).

Abidin, Ummikalsom and Mohd. Ghazali, Normah (2007) Thermal performance of a microchannel with entropy generation minimization. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Abu, Aminuddin (2005) Sensitivity analysis due to structure modification. In: Malaysian Science & Technology Congress, 2005, Kuala Lumpur.

Abu, Aminudin (2012) Eigenvector normalization in structural design sensitivities. In: Conference on Emerging Trends in Mechanical Engineering (NCE TIME) 12, 8th - 9th March 2012, Chennai, Tamil Nadu, India.

Abu, Aminudin (2013) Experimental study on the effectiveness of helical strakes in suppressing vortex-induced vibration of a flexible cylinde. In: MJIIT-JUC Joint International Symposium.

Abu, Risal and Md. Tap, Masine (2003) Automatic feature recognition for machining features. In: 3rd International Conference On Advenced Manufacturing Technology, 2003, Kuala Lumpur.

Abu Bakar, A. R. and Mohamed Latif, M. R. and Tukiman, M. N. F. (2007) Brake squeal analysis using finite element method. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture , 2007, UKM.

Abu Bakar, Abd Rahim (2010) Analysis of a simple dics brake model using eigenvalue approach. In: 3rd Regional Conference on Noise, Vibration and CVomfort (NVC), 2010, 28-30 June 2010.

Abu Bakar, Abd Rahim and Mokhtar, Mohd. Muzakkir and Abdul Rashid, Mohd. Zam and Sharif, Azhar and Abdul Rahman, Roslan (2007) Prediction of drum brake squeal using complex eigenvalue and dynamic transient analysis. In: 12th Asia Pacific Vibration Conference, August 6-9, 2007, Sapporo, Japan.

Abu Bakar, Abd Rahim and Romain , Szlapka and Azman, Mohd. Nurfairuz and Effandy, Effandy (2010) Experimental investigation of drum brake sequal. In: 3rd Regional Conference in Noise, Vibration and Comfort (NVC) 2010, 26-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim (2013) The effect of external grit particles on brake squeal noise of commercial brake pads. In: Eurobrake 2013, 2013, Germany.

Abu Bakar, Abd. Rahim (2013) Performance of a fully mechanical parking brake system for passenger cars. In: Iop Conf. Series:Materials Science and Engineering 50 (2013), 2013.

Abu Bakar, Abd. Rahim (2013) Performance of an Electro-Mechanical Parking Brake (EMPB) system. In: 4Th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), 2013.

Abu Bakar, Abd. Rahim and Harujan, W. M. M. W. and Abd. Ghani, B. and Saw, C. L. (2010) Suppression of disc brake squeal through structural modifications : numerical approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Ishak, M. R. and Mohd. Taib, J. (2010) Theoretical investigation of vehicle rollaway. In: International Conference On Sustainable Mobility 2010, 1-3 Dec 2010, Kuala Lumpur.

Abu Bakar, Abd. Rahim and Jamaluddin, Effandy and Leong, Chin Yin (2007) An experimental investigation into noise and vibration of an automotive wiper. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture , 2007, Bangi.

Abu Bakar, Abd. Rahim and Jamaludin, M. R. and Rahman, R. A. (2010) Suppression of disc brake squeal through structural modifications : experimental approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Md. Zain, Mohd Zarhamdy and Dehkordi, S. M. H. and Md. Yusop, N. (2010) Stability analysis of a simple disc brake model using eigenvalue approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC ) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Salim, M. A. and Md. Zain, M. Z. and Hassan, M. F. (2009) Parameter study on modification factors of blade reversal in automotive wiper system. In: 2nd International Conference & Workshops on Basic & Applied Sciences and Regional Annual Fundamental Science Seminar 2009 (ICORAFSS 2009), 2009, The Zon Regency Hotel, Johor Bahru.

Abu Bakar, Abd. Rahim and Sharif, A. and Rashid, M. Z. A. (2007) Brake squeal: complex eigenvalue versus dynamic transient analysis. In: 2007 SAE International, 2007, Michigan, USA.

Abu Bakar, Abd. Rahim (2013) The study of disc brake noise on three different types of friction. In: The 2nd International Conference on Recent Advances In Automotive Engineering & Mobility Research (Recar 2013) Materials, 2013.

Abu Bakar, Nooh (2013) Design-to-cost framework in product design using Inventive Problem Solving Technique (TRIZ). In: 10th International Conference on Innovation and Management ICIM 2013.

Abu Bakar, Rosli and Ramasamy, Devarajan and Chen Wee, Chew (2003) Analysis of scavenging process in a new two stroke cross-scavenged engine. In: The 3rd International Conference On Advances In Strategic Technologies Malaysia, 2003, Kuala Lumpur, Malaysia.

Abu Bakar, Rosli and Abd. Rahim, Mohd. Fadzil and Gan, Leong Ming (2003) Effect of heat transfer on cylinder wall during cooling process using computational fluid dynamic. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Rosli and Chong, Chin Lee and Indraguna, Vannebula E. (2003) An investigation of RSM approach in calibrating the ignition control module spark timing look-up table. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Rosli and Leong, S.K. and M.A., Sera (2003) Effects of swirl device in a Compressed Natural Gas (CNG) engine. In: 3rd International Conference On Recent Advances in Materials, Minerals, and Environment 2003, 2003, Penang, Malaysia.

Abu Bakar, Rosli and Leong, S.K., and Sera, M.A. (2003) Effect of swirl device in a Compressed Natural Gas (CNG) engine. In: International Conference on Recent Advances in Materials, Mineral Environment, 2003, Penang, Malaysia.

Abu Bakar, Rosli and Ramasamy, Devarajan and Chiew, Chen Wee (2003) Heat transfer in the cylinder of a new two stroke cross-scavenge engine. In: Malaysian Science and Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Saiful Anuar (2013) Design of remotely operated vehicle for underwater research. In: Proceedings of 6th Malaysian International Seminar on antarctica (MISA6).

Abu Bakar, Saiful Anuar and Abd. Rahman, Roslan and Jamaluddin, Hishamuddin and Mohd. Samin, Pakharuddin (2007) Simulation studies on the performance of magnetorheological damper in passenger vehicle's semi active suspension system. In: Conference On Applications and Design In Mechanical Engineering (CADME 2007), 2007, Kangar, Perlis.

Abu Bakar, Tuty Asma (2012) Effect of annealing treatment on the wear properties of NI rich NITI alloy coatings. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Abu Bakar, Tuty Asma (2012) Effect of submerged arc welding parameters on the abrasive wear resistance of lincore 60-o hardfacing materials. In: International Science Postgraduate Conference 2012, 2012.

Abu Bakar, Tuty Asma The effects of quenching media on the microstructures and properties of Cu-Al-Ni shape memory alloys. In: 21st Scientific Conference Of The Microscopy Society Malaysia.

Abu Bakar, Tuty Asma and Hamzah, Esah (2012) Influence of alloying elements on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys. In: 8th International Materials Technology Conference and Exhibition 2012, 9 - 12 July , Kuala Lumpur, Malaysia.

Abu Bakar, Tuty Asma and Tuty Asma Abu Bakar, Tuty Asma and Esah Hamzah, Tuty Asma and Safaa Najah Saud, Tuty Asma (2013) Effect of aging treatment on the microstructures and tensile properties of Cu-Al-Ni-Co shape memory alloys. In: International Symposium on Advanced Materials Science 2013 (ISAM 2013)Japan, 2013, Japan.

Abu Hassan, Shukur and Mohd. Sam, Abdul Rahman and Ismail, Yob Saed and Tan, Chin Han and Tan, Sek Lin (2003) Bond behaviour of CFRP plate bonded to concrete. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Hassan , Shukur (2013) Tensile and quasi-static flexural properties of recycled glass fibre reinforced polyester composite. In: International Conference on The Science and Engineering of Materials (ICoSEM2013) , 2013.

Abu Husain, Nurulakmar (2013) Experimental analysis of bending and tensile behaviour of aluminium-based fibre metal laminates. In: 9th International Conference on Fracture & Strength of Solids.

AbuBakar, A. R. and AbdulHamid, M. K. and Mohamad, M. and Dzakaria, A. and AbdGhani, B. (2006) Numerical analysis of disc brake squeal considering temperature dependent friction coefficient. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Abul Hossain, Khandoker and Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Babu Appalanidu, Kiran and Nasir Ani, Farid (2003) Emission of air pollutants from an industrial oil burner used for small scale application. In: 17th Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Tanjung Bungah. Penang.

Adnan, Faizul Amri and Hironori, Yasukawa Experimental investigation of wave-induced motions of an obliquely moving ship. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Adnan, Faizul Amri (2012) Field measurement of fishing boats generated waves. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Adnan, Faizul Amri (2012) Hydrodynamic interaction between two ships advancing in close proximity in waves. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics-APHydro 2012, 2012.

Adnan, Faizul Amri (2012) On the service performance of LNG carriers in actual seas. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics- APHydro 2012, 2012.

Adnan Hassan, (2013) A framework for multivariate process monitoring and diagnosis. In: Applied Mechanics And Materials.

Adnan Hassan, (2013) Multivariate process monitoring and diagnosis: a case study. In: Applied Mechanics And Materials.

Affandi, Marwan and Wan Hassan, Mat Nawi (2007) Energy saving in air-conditioning system using a variable speed compressor. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Kuching.

Agoes Priyanto, (2013) Effect of increasing rudder deflection on rudder inflow for LNG vessel in shallow water. In: Advanced Materials Research.

Ahmad, Mohd Zamani and Yaakob, Omar and Abd. Kader, Ab. Saman and Sinha, R.P. and Olanrewaju, Oladokun Sulaiman An analysis of technological development in propulsion and transportation. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ahmad, R. and Jamaluddin, H. and Hussain, M. A. (2002) Multivariable system identification for dynamic discrete-time nonlinear system using genetic algorithm. In: UNSPECIFIED.

Ahmad, Shaharudin and Abd. Malik, Adi Maimun and Yupiter HP, Manurung and Rahmad, Junaidah and Mohd. Nasir, Rizal Effendy and A. Bakar, Hamzah and Omar, Rohani (2008) Transverse strength of a semi-small waterplane area twin hull (SWATH). In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ahmad, Sufizar and Muhamad, Norhamidi and Muchtar, Andanastuti and Sahari, Jaafar and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan (2008) Sintering effect for titanium foam prepared by slurry method. In: Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing , June 30th – July 2nd, 2008, University of Skövde, Sweden.

Ahmad, Sufizar and Muhamad, Norhamidi and Muchtar, Andanastuti and Sahari, Jaafar and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan and Mohamad Nor, Nor Hafiez and Ibrahim, Murtadhahadi (2008) Pembangunan dan penghasilan titanium berbusa. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

Ahmad, A. S. and Yusuf, M. A. M. and Majid, M. S. and Rahman, H. A. (2009) Perspective of wind power harnessing based on Senai meteorological data, Malaysia. In: International Conference Electrical Energy and Industrial Electronic Systems (EEIES 2009), 2009, Parkroyal, P.Pinang.

Ahmad, Arshad Analysis of the pyrolytic fuel properties of empty fruit bunch briquettes. In: UNSPECIFIED.

Ahmad, Arshad (2012) Framework of accident modeling in chemical process industries. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad, Arshad (2012) Modeling and simulation of heat exchanger using multilevel flow modeling. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad, Arshad A semicontinuous approach for azeotropic distillation. In: UNSPECIFIED.

Ahmad, Arshad and Nasef, Mohamed Mahmoud El-Sayed and Ripin, Adnan (2015) Current status of radiation grafted membranes for fuel cells in Malaysia. In: 5th International Conference on Fuel Cell and Hydrogen Technology, 6 Sept, 2015, Johor Bahru, Johor.

Ahmad, Arshad (2012) Using pictorial work instructions: reducing motion variation in process. In: International Conference in Advanced Manufacturing and Materials Engineering (ICAMME’2012), 2012.

Ahmad, Arshad (2013) Fault detection and diagnosis for pilot heat exchanger pilot plant system using multiflow modeling. In: 2nd Conference on Emerging Energy and Process Technology (CONCEPT2013), 2013.

Ahmad, Md. Fauzi and Mohd. Yusof, Sha'ri (2007) Comparative study of TQM practices Between Japanese and Non-Japanese based electrical and electronics companies in Malaysia-a survey. In: World Engineering Congress 2007, 2007, Penang.

Ahmad, Mohd. Zamani The concept of hybrid ballast free system. In: The 6th Asia-Pacific Workshop on Marine Hydrodymics-APHydro2012.

Ahmad, Mohd. Zamani Draft, trim and heel control for LNG ship with hybrid ballast free system. In: UNSPECIFIED.

Ahmad, Mohd. Zamani (2012) Ethnographic based generic design model of traditional Malaysian fishing boats. In: International Conference On Marine Technology (MARTEC 2012), 20-22 October 2014, Terangganu, Malaysia.

Ahmad, Mohd. Zamani (2012) Fuzzy performance profiling of propulsion plant for medium size vessel. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Ahmad, Mohd. Zamani and Abd. Kader, Ab. Saman and Olanrewaju, Oladokun Sulaiman (2007) The demand and supply characteristics of continuing education in developing countries. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Ahmad, Mohd. Zamani (2012) Large offshore remote system for Malaysian deep sea fishing. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Ahmad, Mohd. Zamani (2012) Practical issues on the implementation of ballast free system. In: The 6th Asia-Pacific Workshop on Marine Hydrodymics-APHydro2012, 2012.

Ahmad, Norhayati (2012) Comparison between two models of engineering students’ intellectual development. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012) in conjunction with 4th Regional Conference on Engineering Education and Research in Higher Education (RCEE 2012 & RHEd 2012)., 2012.

Ahmad, Norhayati The effect of laser cutting parameters on the aerospace structure panel of CFRP composite material. In: AEROTECH IV-2012 conference .

Ahmad, Norhayati (2013) Effect of starch addition on microstructure and strength of ball clay membrane. In: International conference on membrane science and technology, MST 2013.

Ahmad, Norhayati (2013) Fatigue characteristics of dual phase steel sheets. In: 9th International conference on fracture & strength of solids.

Ahmad, Norhayati (2013) Low-temperature-sintering of shirasu-balloon powders by using Spark-Plasma-Sintering (SPS) method. In: Japan society of mechanical engineer, JSME conference.

Ahmad, Norhayati (2012) Measuring the strain, nancrystalline size and distribution of mesoporous silica nanoparticles-aluminium loaded by x-ray diffravtion method. In: Nanomaterials Technology Specialised conference 2012, 2012.

Ahmad, Norhayati (2012) Multiple delaminations growth in composite laminate under compressive cyclic loading in Post-Bucklin. In: AEROTECH IV-2012 conference , 21-22 November, 2012, Kuala Lumpur, Malaysia.

Ahmad, Norhayati (2012) Study on fabrication of ceramic membrane for water filtration. In: 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July, 2012, Selangor, Malaysia.

Ahmad, Norhayati and Mohd. Zaidan, Nurhanna (2012) Effect of sintering temperatire on membrane properties of Sayong ball clay. In: 3rd International Conference on Mechanical & Manufacturing Engineering 2012 (ICME 2012), 20-21 November 2012, Batu Pahat, Johor, Malaysia.

Ahmad, Norhayati and Ourdjini, Ali and Hamzah , Haizad and Nordin, Norazhar (2012) Effect of carbon content on the microstructure and strength of drawn steel wire rope. In: 21st Scientific Conference of the Microscopy Society Malaysia (MSM), 22-24 November 2012, Kota Bharu, Kelantan .

Ahmad, Robiah and Abd. Rahim, Abd. Rahman and Hussein, Mohamed and M. Samsuri, Saiful Farhan (2010) Identification and modeling of environment climates inside naturally ventilated tropical greenhouse. In: Asia Modelling Symposium 2010 (AMS 2010), 2-6 May 2010, Kota Kinabalu, Sabah.

Ahmad, Robiah and Desa, M. A. M. (2006) Line tracking system using photoelectric transducer. In: Conference On Manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Ahmad, Robiah and Wong, Kien-Fatt (2006) Speed estimation system of an induction motor. In: Conference On Manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Ahmad, Shaharudin and Maimun, Adi and H. P., Yupiter and Rahmad, Junaidah and Effendy, Rizal and A Bakar, Hamzah and Omar, Rohani (2009) Finite element analysis of a semi-small water-plane area twin hull (SWATH) structure. In: Conference on Scientific and Social Research CSSR2009A', 2009, Famosa Resort, Melaka.

Ahmad, Z. (2013) Application of auxetic foam in energy absorbing system of automotive bumper. In: 7th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2013).

Ahmad, Zair Asrar (2005) Parameters for wobble plate compressor design. In: Malaysian Science & Technology Congress, 2005, Kuala Lumpur.

Ahmad, Zair Asrar and Syahrom, Adiyanshah and Abd. Latif, Ainollotfi and Musa, Md. Nor (2003) Study on the stressing of a new symmetrical wobble plate compressor: kinematics and forces. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ahmad , Rabiah (2003) Cox regression and genetic algorithms for analizing risk factor for all-cause mortality in older people. In: Proceedig of Conference on Management Science and Operations Research 2003, 2003, UKM, Bangi.

Ahmad Hussain, Saiful Azam (2005) Utilzation of palm oil shell waste in a Circulating Fluidized Bed Combustor (CFBC). In: Int. Advanced Technology Congress 2005, 2005, Putrajaya, Malaysia.

Ahmed Abdel Razak, Yasser Mohamed (2013) Fin stabilizer effect on resistance of semi-swath. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA2013).

Ahmed Abdel Razak, Yasser Mohamed and Yaakob, Omar (2012) Studying the hydrodynamic characteristics of sprint master canoe. In: International Conference on Applications and Design in Mechanical Engineering (ICADME 2012), 27-28 Febuary, 2012, Penang, Malaysia.

Ahmed Abdel Razak, Yasser Mohamed (2013) Design and construction of low-cost Remotely Operated UnderWater Vehicle (ROV). In: The International Conference on Marine Safety and Environment, 12-13 November 2013, Johor Bahru, Malaysia. Pg: 250-256.

Ahmed Abdel Razak, Yasser Mohamed (2012) Fundamentals of vortex induced vibration analysis of marine riser. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Numerical simulation of free surface effect on wave interference of catamaran with fin stabilizer. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Numerical simulation of propeller hydrodynamic performance of LNG carrier in open water using fluent. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Production process of traditional ships in Kepulauan Riau-Indonesia. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Review of research on deepwater steel catenary risers. In: International Conference on Marine Technology (MARTEC 2012), 20-22 October, 2012, Terengganu, Malaysia.

Ahmed Eldrainy, Yehia Abdel Morem and S. Aly, Hassam and M. Saqr, Khalid and Mohd. Jaafar, Mohammad Nazri (2009) A multiple inlet swirler for gas turbine combustors. In: International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics (FMHT 2009) , 2009, Tokyo, Jepun.

Alam, M. S. (2005) Design of hybrid learning control for flexible manipukators: a multi-objective optimisation approach. In: 8th Int. Conf. on Climbing and Walking Robots, 2005, Tiada Maklumat.

Alham, Hishamuddin and Tan, Hai Hong (2006) Experimental and computer analysis of a bicycle fork-static analysis. In: Conference On Manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Ali, Mohamad Wijayanuddin and Othman, Mohd. Rizza and Kamsah, Mohd. Zaki (2003) Advisory fault diagnosis system using model-based approach. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Ali, Mohamed A. H. and Mailah, Musa and Tang, Howe Hing (2012) Path navigation for mobile robot in a road roundabout setting. In: Proceedings of 1st International Conference on Systems, Control, Power, Robotics (SCOPORO'12), 11-13 May, 2012, Singapore.

Ali Ourdjini, (2013) Effect of isothermal aging 2000 hours on intermetallics formed between ni-pd-au with sn-4ag-0.5cu solders. In: Advanced Materials Research.

Ali Ourdjini, (2013) Effect of reflow profile on intermetallic compound formation. In: IOP Conference Series: Materials Science and Engineering.

Aminuddin Saat, (2013) Early flame development in the combustion of droplet and vapour mixtures. In: Applied Mechanics And Materials.

Aminudin Abu, (2013) On theoretical of transmission loss in exhaust muffler system. In: Advanced Materials Research.

Aminudin Abu, (2013) Systematic fea study of vehicle exhaust system hanger location using addofd method. In: Applied Mechanics And Materials.

Ammoo, Mohd. Shariff and Mohd Nayan, Mohd Idham and Hussain, Mohd Nasir Conceptual design of UTM 4-seater helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ammoo , Mohd. Shariff (2013) A case study on the air flow characteristics of the hirobo-FALCON 505 controllable helicopter's main rotor blade. In: International Conference on Mechatronics and Computational Mechanics (ICMCM 2013) , 2013.

Amran Ayob, (2013) Computational inteligence in optimization of machining operation parameters of st-37 steel. In: Applied Mechanics And Materials.

Amran Ayob, (2013) Optimization of machining parameters during drilling of 7075 aluminium alloy. In: Applied Mechanics And Materials.

Amrin, Astuty and Hamzah, Esah and Mohd. Badri, Nurfashahidayu and Hamzah, Hafida (2007) High temperature cyclic oxidation of Ti-Al based intermetallic in static laboratory air. In: 2nd National Metallurgical Conference 2007, 26-27th November 2007, The Puteri Pan Pacific, Johor Bahru.

Andwari, Amin Mahmoudzadeh (2013) A converted two-stroke cycle engine for compression ignition combustion. In: The 2nd International Conference On Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013), 2013.

Andwari, Amin Mahmoudzadeh (2013) A technique of minimizing low-load misfiring occurrence in two-stroke cycle engine. In: The 6th International Meeting On Advanced Thermofluids (IMAT2013), 2013.

Ani, Farid Nasir Bio-char and pyroligneous liquid from oil palm leaf stem. In: UNSPECIFIED.

Ani, Farid Nasir Characteristic of bio-oils from oil palm biomass using different pyrolysis processing techniques. In: UNSPECIFIED.

Ani, Farid Nasir (2013) Corrosion characteristics of copper in Malaysian bioethanol and gasoline blends. In: 2013 lnternational Conference on Materials Science and Mechanical Engineering, 2013.

Ani, Farid Nasir (2012) The effects of diesel fuel exposure to high pressure common rail system on its deposit forming tendency. In: SEATUC 2012, 6-7 March, 2012, Bangkok, Thailand.

Ani, Farid Nasir (2013) Microwave thermal conversion of biomass for biofuels and value-added products. In: 2nd international Conference on Mechanical Engineering And Renewable Energy, 2013.

Ani, Farid Nasir and Darus, Amer Nordin and Hussain, Ahmad (2006) Thermal behaviour of coal/biomass blends during co-pyrolysis. In: Regional Postgraduate Conference on Engineering and Science 2006, 2006, Skudai, Johor.

Ani, Farid Nasir and Darus, Amer Nordin and Hussain, Ahmad and Wahid, Mohammad Khalid and Mokhtar, Hamdan and Azam, Saiful and Sulaiman, Norzalia and Mustafa, Azeman (2006) An investigation into the thermochemical behaviour of the Malaysian oil palm shell wastes and coal blends and its combustion studies in a circulating fluidizied bed. In: International Conference on Agricultural Waste Turning Wastes to Wealth, 2006, Marriot Hotel, Putrajaya.

Ani, Farid Nasir and Hussin, Ahmad (2006) Co-firing option of palm shell waste and Mukah coal blends in a circulating fluidised bed. In: Proceedings of the JSPS-VCC Group Seminar 2006 , 2006, Skudai, Johor.

Ani, Farid Nasir and Jais, Mohd. Fadzli (2009) Biodiesel from non-edible Malaysian fruits. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Ani, Farid Nasir and Lim, Xin Yi and Koh, Guan Chin and Miura, Koichi (2006) High pressure pyrolysis of oil palm shell residues. In: Proceedings of the JSPS-VCC Group Seminar 2006 , 2006, Skudai, Johor.

Ani, Farid Nasir and Syful Anwar, Muhammad Ridwanto (2006) Pyrolysis characteristics and kinetics of palm shell waste mixture with Mukah Ballingian coal. In: International Conference on Energy and Environment 2006, 2006, Bangi, Selangor.

Ani, Farid Nasir and X., Y. Lim (2006) Continuously fast pyrolysis of oil palm shell for bio-oil production. In: Proceedings of the JSPS-VCC Group Seminar 2006 , 2006, Skudai, Johor.

Ani, Farid Nasir (2013) The effects of injection parameters on the performance and emissions of common rail light duty engine fueled with palm oil biodiesel. In: 4th International Conference on Mechanical and Manufacturing Engineering, 2013.

Ani, Farid Nasir (2013) The lubricity of palm fatty acid distillates with various rotational speeds. In: 1st International Materials, Industrial and Manufacturing Engineering Conference, 2013.

Ani, Farid Nasir (2013) The potential energy of plastic solid waste as an alternative fuel for power plants in Indonesia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material , 2013.

Ani, Farid Nasir (2013) Solid waste generation in Malaysia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material , 2013.

Ani , Farid Nasir (2013) Bioethanol Production From Sago Pith Residue (SPR) using microwave enhanced hydrothermal hydrolysis accelerated by carbon dioxide. In: International Conference of Chemical Engineering and Industrial Biotechnology.

Ani , Farid Nasir (2013) Compatibility study of automobile fuel system in bioethanol and gasoline blends. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Ani , Farid Nasir (2013) An investigation of a self-pressurized alpha V-Type stirling engine converted diesel engine. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Ani , Farid Nasir (2013) Microwave thermal conversion of biomass for biofuels and biochars. In: 1st International Materials, Industrial and Manufacturing Engineering Conference, 2013.

Ani , Farid Nasir (2013) Performance and emission of a common rail passenger car engine fuelled with palm oil biodiesel. In: International Conference on Advances In Mechanical and Manufacturing Engineering, 2013.

Ani , Farid Nasir (2013) Energy analysis on a split-type conditioner using ejector as an expansion device. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material.

Ani , Farid Nasir (2013) Experimenal investigation on the use of secondary refrigerant in freezer for energy savings. In: 1st International Conference on Mechanical Engineering.

Ani , Farid Nasir (2013) Fuel ethanol production from sago waste using microwave assisted thermo-chemical hydrolysis. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Ani , Farid Nasir (2013) Fuel system response of a common rail passenger car engine fuelled with palm oil biodiesel. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material.

Anwar, Mahmood and Mohd. Ghazali, Normah (2009) Counter-top thermoacoustic refrigerator - an experimental investigation. In: The 10th Asian International Conference on Fluid Machinery Conference (10th AICFM), 2009, Berjaya Times Square Hotel & Convention Centre, Kuala Lumpur.

Arafat, Andril and Ahmad, Zair Asrar and Syahrom, Ardiyansyah and Mohd Ainon, Nor Ilham and Musa, Md. Nor and Abdul-Latif, Ainullotfi and Wan Mat, Wan Ali (2006) Piston ring assembly for a new natural gas vehicle symmetrical multistage wobble-plate compressor. In: Proceedings of the 1st Regional Conference On Vehicle Engineering and Technology 2006 (RIVET 2006), 3-5 July 2006, Kuala Lumpur, Malaysia. (Unpublished)

Ardiyansyah, Ardiyansyah (2005) Desgn and development of a symmetrical wobble-plate compressor for natural gas vehicle refueling. In: Int. Conf. on Engineering Design (ICED 05), 2005, Australia.

Ardiyansyah Syahrom, (2013) Mechanical properties of trabecular bone through compression and combined compression-torsion test: a comparative study. In: Applied Mechanics And Materials.

Ariffin, Mohd. Kamal and Osman, Kahar and Senawi, M. Yusoff and M. Haneef, Danee Zainal (2006) Thermal energy storage: case study on Rusch Manufacturing Sdn Bhd. In: International Symposium and Exhibition on Sustainable Energy and Environment 2006, 2006, Kuala Lumpur.

Ariyono, Sugeng and Tawi, Kamarul Baharin and Jamaluddin, Hishamuddin and Supriyo, Bambang (2006) Engine speed control using artificial neutral network for vehicle equipped with electromechanical CVT. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ariyono, S. (2005) Electromechanical continuously variable transmission: future potential for automotive transmission. In: Int. Conf. on Information and Communication Technology, 2005, Jakarta, Indonesia.

Ariyono, Sugeng and Jamaluddin, Hishamuddin and Tawi, Kamarul Baharin (2003) A trend of present continuously variable transmission controls. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

As'arry, A and Zain, M.Z Md and Hussien, M and Mailah, Musa and Abdullah, M.Y and Ahmad, R.R and Kazi, S (2008) Development of hand-arm model rig for tremor excitation. In: Proceedings - International Symposium on Information Technology 2008, ITSim .

As’arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus (2009) Behaviour of the hand-arm postural tremor model in simulation and experimental study. In: The 2nd International Conference on Control, Instrumentation and Mechatronics Engineering (CIM 2009), 2009, Melaka.

Atar Singh, Dalbir Singh (2005) Parametric study on solar vapour compression cooling system for motor vehicles. In: Int. Conf. on Recent Advance in Mechanical & Materials Engineering, 2005, Kuala Lumpur.

Aung, Lwin Moe (2013) Performance evaluation of jeep suspension using quarter and half car models. In: the Fourth international Conference on Science and Engineering , 2013.

Aung, Lwin Moe and Kanao, Fukuda and Bin Abu, Aminudin and Razdi, Raihan (2013) An investigation of lapping characteristics for mirror-like finish using a lathe with linear motor. In: International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E 2013), 2013.

Awang, Dzulkifli (2004) Rekabentuk Industri Dalam Kejuruteraan Mekanikal. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Awang, I M and C , Y Leong and Abu Bakar, Abd Rahim and Abdul Ghani, Badri and Abd. Rahman, Roslan and Md. Zain, Mohd. Zarhamdy Modeling and simulation of automotive wiper noise and vibration using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Awang, Dzulkifli (2007) Comparison between 'project-oriented' learning and problem-based learning (PBL) in design subject. In: 2nd Regional Conference on Engineering Education , 2007, Johor Bahru.

Awang, Dzulkifli and Mohd. Noor, Mohd. Hafez (2006) Case study-facilities and infrastructures required in running an industrial design course in institute of higher learning. In: National Conference On Design and Concurent Engineering 2006 (DECON 2006), 2006, KUTKM.

Awang, I. M. and Abu Bakar, A. R. and Abd Ghani, B. and Abd Rahman, R. and Md. Zain, M. Z. (2009) Modelling and simulation of wiper noise and vibration using the finite element method. In: International Conference on Advances in Mechanical Engineering, 2009, UiTM,Malaysia.

Awang, Mohd. Afiq (2005) Study in combustion emission characteristic of diesel engines using palm oil blended diesel fuels. In: Malaysian Science & Technology Congress, 2005, Kuala Lumpur.

Ayob, A. and Kabashi, M. (2007) Influence of optimum autofrettage on fatigue life of pressurized thick-walled cylinders. In: World Engineering Congress 2007, 2007, Penang.

Ayob, Amran (2012) Effect of thickness of layers on displacements and stresses in laminated gfrp cylinder subjected to radial load. In: 2nd International Conference on Key Engineering Materials (ICKEM, 2012), 26-28 February 2012, Singapore .

Azhar, Abdul Aziz and Ismail, Mas Fawzi (2006) Numerical investigation on the needle-shape of hollow-cone pressure-swirl type gasoline direct injector. In: SAE 2006 World Congress, 2006, Detroit, USA.

Azhar, Abdul Aziz and Mohd. Ali, Mas Fawzi (2006) Numerical investigation on the needle-shape of pressure-swirl atomizers for gasoline direct injection. In: Proceedings of the 11th Asian Congress of Fluid Mechanics, 2006, Kuala Lumpur.

Azhar Abdul Aziz, (2013) Investigation of various mixtures of hc290/hc600 refrigerants in adiabatic capillary tube used in split-type air-conditioner. In: Applied Mechanics And Materials.

Azmah, H. M. A. and Oudjini, A. and Esah, H. (2006) Effect of annealing and thermal aging on intermetallics formed between Sn-4Ag-0.5 Cu solder with different surface finishes. In: Conference On manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Azmi, Azwan Iskandar (2003) A study on implementation of step AP224 for process planning. In: Advanced Technology Congress 2003, 2003, Putrajaya, Selangor.

Azmira, O. Shahrul and Nor Azwadib, C. S. (2009) Virtual investigation of free convection from concentric annulus cylinder by the finite difference lattice boltzmann method. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009, 2009, Taman Safari, Bogor, Indonesia.

Azwadi, N. and M. Sahat, Idris (2009) Finite different and lattice boltzmann modelling for simulation of natural convection in a square cavity. In: World Congress on Nature and Biologically Inspired Computing, 2009.

Badawi, E. M. (2005) Hybrid desiccant cooling systems as efficient energy replacement for air conditioning applications. In: National Conference On Advances In Mechanical Engineering, 2005, Kuala Lumpur.

Bahrachi, Ahmad Reza Abbasi and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain (2009) Spray pattern analysis for a pressure-swirl atomizer with four different nozzle configurations using eulerian-DPM multiphase approach. In: The 10th Asian International Conference on Fluid Machinery Conference (10th AICFM), 2009, Berjaya Times Square Hotel & Convention Centre, Kuala Lumpur.

Baptise, S. and Basile, G. and Abu Bakar, A. R. and Wan Harujan, W. M. and Ghani, B. A. (2009) Finite element analysis of drum brake squel. In: International Conference on Advances in Mechanical Engineering (ICAME09), 2009, Concorde Hotel, Shah Alam, Selangor.

Bazin, Nor Erne Nazira and Ali, Nor Azizah and Mohd Azmi, Nurulhuda Firdaus (2006) Kawalan Inventori Alat Ganti Menggunakan Teorem Bayesian : Kajian Kes. In: Seminar Kebangsaan Sains Kauntatif, 19-21 Disember 2006, Langkawi Kedah, Malaysia.

Belyamin, (2013) Characterization of diesel engine generator operating at different compression ratio fuelled with palm oil biodiesel. In: Applied Mechanics And Materials.

Bong, Chloe Yen Yen (2013) Car cabin air flow characterization for cooling effect. In: The 6Th International Meeting On Advanced Thermofluids (IMAT2013), 2013.

Boon Han, Lim (2005) Biometrics signature verification method with the application of neural network. In: 2nd Int. Conf. on Mechatronics (ICOM 05), 2005, Kuala Lumpur.

Bujang, I. Z. and Abdul Rahman, Roslan (2007) Dynamic analysis, updating and modification of truck chassis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture , 2007, Kuala Lumpur.

C. T., Kuah and K.Y., Wong (2009) Lean manufacturing through value stream mapping and stimulation. In: 2nd Asia Pacific Conference on Manufacturing System, 2009, Yogyajakarta, Indonesia.

C. Venkatesh, V. (2005) Critical depth of cut in vertical diamond grinding. In: 21st AIMTDR Conference, 2005, India.

C. Venkatesh, V. (2005) New method of aspheric generation for manufacturing glass moulds on vertical machine centre. In: 4th Asian Conf. on Industrial Automation and Robotics, 2005.

Chan, Alan Kah Poh and Cheng, See Yuan and Mat Yamin, Ahmad Kamal and Jalaluddin, Ainil Jesita and Ishak, Iskandar Shah and Mansor, Shuhaimi (2008) The assessment of the effect of surface roughness on drag coefficient and aerodynamics features of loggerhead sea turtle carapace. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Che Sidek, Nor Azwadi (2007) Finite difference incompressible lattice boltzmann model for the simulation of 2-D lid driven cavity flow. In: Proceeding of Computational & Experimental Mechanics (CEM 2007), 2007, UKM, Bangi.

Che Sidek, Nor Azwadi (2010) Virtual investigation of plume behavior from a heated eccentric annulus cylinder. In: Recent Advances And Applications Of Computer Engineering - Proceedings Of The 9Th Wseas International Conference (ACE 10) , 2010, Penang, Malaysia.

Che Sidek, Nor Azwadi and A. R. M., Rosdzimin and S. M., Zuhairi (2010) Study of plume behaviour two heated cylinders at high Rayleigh number using lattice Boltzmann method. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Che Sidek, Nor Azwadi and S. A., Osman (2010) Lattice BGK computational method for solving natural convection heat transfer from a heated non-concentric annulus cylinder. In: 2010 2nd International Conference on Computer Engineering and Applications, ICCEA 2010, 19-21 March 2010, Bali Island, Indonesia.

Che Sidek, Nor Azwadi and Tanahashi, T. (2007) Development of 2-D and 3-D double-population thermal lattice boltzmann models. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Che Sidek, Nor Azwadi and Tanahashi, T. and Noguchi, H. (2007) Simplified finite difference thermal lattice boltzman method. In: The Eighteenth International Symposium on Transport Phenomena, 27-30 Aug. 2007, Daejeon, Korea.

Che Sidek , Nor Azwadi and M. A., Mussa and S., Abdullah and N., Muhamad (2010) Cubic-interpolated-pseudo-particle lattice Boltzmann method for simulation of natural convection heat transfer in an enclosure with different aspect ratios. In: 2010 The 2nd International Conference on Computer and Automation Engineering, 2010, Singapore.

Che Sidik, Nor Azwadi (2010) LB numerical prediction of natural convection heat transfer in an inclined square enclosure. In: Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

Che Sidik, Nor Azwadi (2012) Modeling of convective heat transfer of Al2O3-H2O nanofluid in inversed L-shaped cavities. In: International Conference on Science, Technology and Social Science, 2012.

Che Sidik, Nor Azwadi (2012) Numerical investigation of 2-D free convection of nanofluid in l-shaped enclosure. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 20-21 November, 2012, Batu Pahat, Johor.

Che Sidik, Nor Azwadi (2012) Numerical prediction of heat transfer from localized heating in enclosure using CIP method. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 20-21 November, 2012, Batu Pahat, Johor.

Che Sidik, Nor Azwadi (2010) Numerical study of droplet dynamics on solid surface. In: International Conference Applied physics and Mathematics (Peringkat Antarabangsa), 7-10 May, 2010, Kuala Lumpur.

Che Sidik, Nor Azwadi (2010) Simplified mesoscale porous media model for natural convective heat transfer in a square geometry. In: International Conference on Applications of Computer Engineering (ACE ’10) (Peringkat Antarabangsa), 23-25 March 2010, Pulau Pinang.

Che Sidik, Nor Azwadi (2012) Simulation of mixed convection around a square by using LBM. In: 2012 4th International Conference on Mechanical and Electrical Technology ICMET 2012, 24-26 July, 2012, Kuala Lumpur, Malaysia.

Che Sidik, Nor Azwadi (2012) Thermodynamic analysis of flow field at the end of combustor simulator. In: Aerotech Iv 2012 : Aerotech Iv: Conference on Recent Advances in Aerospace Technology, 21-22 November, 2012, Kuala lumpur, Malaysia.

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2009) Efficient mesh for driven square cavity. In: Taman Safari, Bogor, Indonesia, 2009, The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 .

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2009) Study of flow behaviour in triangular cavity. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009, 2009, Taman Safari, Bogor, Indonesia.

Che Sidik, Nor Azwadi and Fudhail, M. (2010) Numerical Simulation of shear driven square cavity using enhanced meshing system. In: Proceeding, Malaysian Technical Universities Conference on Engineering and Technology, 26 May, 2010, Kuantan, Malaysia.

Che Sidik, Nor Azwadi and Fudhail, M. and Rody, M. (2010) Modeling of droplet motion on horizontal plane by using lattice boltzmann numerical scheme. In: roceeding, International Conference on Fundamental and Applied Sciences, 15-16 June 2010, Kuala Lumpur.

Che Sidik, Nor Azwadi and Ibrahim, N. I. N. (2010) Mesoscale simulation of natural convection in an inclined square enclosure. In: Proceeding, WSEAS, Application of Computer engineering, 23-25 March. 2010, Pulau Pinang.

Che Sidik, Nor Azwadi and Ibrahim, N. I. N. (2010) Mixed convection in a 2-d enclosure with sinusoidal side wall temperature. In: Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

Che Sidik, Nor Azwadi and Idris, M. S. (2010) Numerical investigation of 2D lid-driven cavity flow by the non-uniform finite different method. In: Proceeding, National Conference in Mechanical Engineering for Research and Postgraduate Studies, 26 May, 2010, Kuantan.

Che Sidik, Nor Azwadi and Munir, M. F. and Zahir, H. M. and Musthafah, M. T. and Rody, M. (2010) Numerical simulation of shear driven square and triangular cavity by using lattice Boltzmann scheme. In: Proceeding, World Academy of Science, Engineering and Technology,, September 2010, Holland.

Che Sidik, Nor Azwadi and Nik Mu'tasim, Muhammad Ammar (2009) A study of transient flow in a lid-driven square cavity. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Che Sidik, Nor Azwadi and Osman, Shahrul Azmir (2009) An initial study of coupled finite element Lattice Boltzmann Simulation Scheme. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Che Sidik, Nor Azwadi and Rody, M. (2010) Modelling of droplet spreading falling by using lattice Boltzmann method. In: Proceeding, World Engineering Congress, 2-9 August 2010, Kuching, Sarawak.

Che Sidik, Nor Azwadi and Sujatmoko, Agus (2010) Mesoscale computational approach for shear driven cavity flow. In: The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010), 19 -21 June 2010, Bali, Indonesia.

Cheng, C.F. and N., Mohd. Ghazali (2007) Predicting acoustic wave-flow in a thermoacoustic resonator with binary gas-mixtures. In: 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2007), 2007, South Africa.

Ching Hao, Koh (2005) A preliminary framework for a web-based control chart pattern recognition system. In: Int. Advanced Technology Congress 2005, 2005, Putrajaya, Malaysia.

Ching Hao, Koh (2005) Preliminary framework for the development of a web-baed statistical process control chart pattern recognition system. In: Conference on Computer integrated Systems, 2005, Putraya.

Chit, Ong J. and Omar, Ashraf A. and Asrar, Waqar and Ismail, Ahmad Faris (2006) Gas-Kinetic BGK Scheme for Supersonic Channel Flow Simulation. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Chong Cheng Tung, (2013) Flow field of a model gas turbine swirl burner. In: Advanced Materials Research.

Chong Cheng Tung, (2013) Spray flame study using a model gas turbine swirl burner. In: Energy Engineering And Environmental Engineering, Pts 1And 2.

Chuan Chin, Wong and Ani, Farid Nasir and Mohd. Nor, Hussin Hussin (2003) Quantification of extracted pyrolysis oil from oil palm shells. In: International Conference On Chemical And Bioproses Engineering-ICCBPE 2004, 2003.

Cong, Cheng Eng (2005) Sustainable power: solar thermal driven organic rankine cycle. In: Int. Conf. on Recent Advance in Mechanical & Materials Engineering, 2005, Kuala Lumpur.

Crysdian, Cahyo and Abdullah, Abdul Hanan (2003) Access controlling firewall using bell-lapadula security model. In: Quality In Research Seminar, 2003.

D., Kurniawan and S., Sharif and M. N., Hisyam and J. Y., Lim (2009) End milling of stainless steel using vegetable oil cutting fluid. In: KSME 2009 Fall Annual Meeting, 2009, Gongwan, Korea.

Darsivan, Fadly Jashi and Martono, Wahyudi (2006) Engine Mounting Characteristic for Vibration Isolation and Active Vibration Control Strategies. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Darus, Amer Nordin and Y. Y., Fatt (2010) Secondary flows in curved rectangular ducts with diminishing cross section. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Daud, Mohd. Fadzil Conceptual knowledge in three dimensional computer aided design (3D CAD) modeling: A literature review and conceptual framework. In: UNSPECIFIED.

Dehkordi, Syed Mahdi Hashemi and Mailah, Musa and Abu Bakar, A. R. (2009) Dual axes active control of brake noise and vibration. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM 09), 2009, Melaka.

Denni Kurniawan, (2013) Machining conditions effect to machining temperature and forces in orthogonal machining of bone. In: Advanced Materials Research.

E., Amrina and S. M., Yusof (2009) Manufacturing performance measurement in malaysian automative small and medium-sized enterprise: a proposed tool. In: International Conference on Quality, Productivity And Performance Measuremant (ICQPPM'09), 2009, Palm Garden, Hotel, Putrajaya.

E., Amrina and S. M., Yusof (2009) A proposed manufacturing performance measures for small and medium-sized enterprise (SMEs). In: Asia Pacific Industrial Engineering and Management Systems Conference APIEMS 2009, 2009, Kitakyushu International Conference Center, Kitakyushu-city, Japan.

E. U., Olugu and K. Y., Wong and A. M., Shaharoun (2009) A conceptual framework for green supply chain performance measurement in the automative industry. In: 13th International Business Information Management Association Conference , 2009, Kenzi Farah Marrakech Hotel , Morocco.

E. U., Olugu and K. Y., Wong and A. M., Shaharoun (2009) Proposed performance measurements areas for an automobile green supply chain. In: 13th International Business Information Management Association Conference , 2009, Kenzi Farah Marrakech Hotel , Morocco.

E. U., Olugu and K. Y., Wong and A. M., Shaharoun (2009) A two-in-one model for evaluating the performance of an automative closed-loop supply chain. In: 3rd International Conference on Operations and Supply Chain Management, 2009, AIMST Campus, Bujang Valley, Malaysia.

El Dien Mansour Saqr, Khalid Mohammed Mohieel and Sies, Mohsin M. and Abd Wahid, Mazlan (2009) Analyzing the effect of free stream turbulence on gaseous non-premixed flames. In: Asian International Conference on Fluid Machinery (10th AICFM), 2009, Hotel Berjaya Times Square & Convention Centre, KL.

Engku Abu Bakar, Engku Mohammad Nazim and Sudin, Izman and Ourdjini, A. and Shaharoun, A. M. (2007) Effect of pretreatment and deposition parameters on diamond nucleation in CVD. In: National Metallurgical Conference, The Putri Pacific Hotel. Johor Bahru, Johor.

Esah, Hamzah and Kanniah, M. and Harun, M. (2006) Microstructure and creep behaviour of AS-cast binary two phase gamma TiAl. In: Regional Postgraduate Conference on Engineering and Science , 2006, Skudai, Johor.

Esah Hamzah, (2013) Effect of solution annealing and low temperature ageing on the micrestructures and superelastic behaviour of ti-50.at.%ni alloy. In: Advanced Materials Research.

Esah Hamzah, (2013) Effects of cathodic protection and coating on the corrosion rate of carbon steel in stagnant and flowing freshwater. In: Green Technologies For Sustainable & Innovation In Materials.

Esah Hamzah, (2013) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: Green Technologies For Sustainable & Innovation In Materials.

Esah Hamzah, (2013) High temperature creep behavior of austenitic fe-ni-cr alloy. In: Green Technologies For Sustainable & Innovation In Materials.

Esah Hamzah, (2013) XRD studies on residual stress of the diamond films grown using hot filament chemical vapour deposition technique on silicon nitride and tungsten carbide substrates. In: Green Technologies For Sustainable & Innovation In Materials.

Esah Hamzah, (2013) Corrosion behaviour of lead-free and sn-pb solders in 3.5wt% NACL. In: Green Technologies For Sustainable & Innovation In Materials.

Esah Hamzah, (2013) Effect of ageing treatment on the microstructures of ti-50.7at.%ni shape memory alloy. In: Green Technologies For Sustainable & Innovation In Materials.

F., Nor Akmal and A., Ourdjini and M. A., Azmah Hanim and I., Siti Aisha and Y. T., Chin (2007) Effect of solder bump size on interfacial reactions during soldering between Pb-free solder and Cu and Ni/Pd/Au surface finishes. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Faizal, H. M. and Nor Azwadi, C. S. (2009) Reduction of time consumption for simulating lid-driven cavity flow using lattice boltzmann method (LBM). In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Farahany, Saeed and Ourdjini, Ali and Idris, Mohd. Hasbullah and Aghaie, Mehrdad and Jafari, Hassan (2009) Effect of pre and post heat-treatment on mechanical properties of hot isostatically pressed superalloy inconel 738. In: International Conference on Advanced in Materials and Processes Technologies (AMPT 2009), 2009, Hotel Legend, Kuala Lumpur.

Faramoushjan, Shahram Ghaedi and Chinaei, Farhad and Bakhsheshi-Rad, Hamid Reza and Idris, Mohd Hasbullah (2013) Effect of fluoride conversion coating on corrosion of behavior of mg-ca-zn alloy. In: Advanced Materials Research.

Farid Nasir Ani, (2013) Energy efficient microwave irradiation of sago bark waste (SBW) for bioethanol production. In: Advanced Materials Research.

Ferdin Ramly, Edly and Mohd. Yusof, Sha'ri and Mohd. Rohani, Jafri (2007) Manufacturing audit to improve quality performance-a conceptual framework. In: World Engineering Congress 2007, 2007, Penang.

Fong, Joyce Koh Swee and Ourdjini, Ali (2006) Effect of solder bump size on intermetallic compound formation during soldering on Ni-Au surface finish. In: Conference On manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Frinaldi, Feri A. and Mat Saman, Muhamad Zameri and Mohamad Shaharoun, Awalluddin (2009) A new methodology for end-of-life product disassembly analysis. In: 1st International Congress on Sustainability Science and Engineering (ICOSSE2009), 2009, Ohio & Kentucky, Amerika Syarikat.

Ghazali, N. M. (2007) Development of web-based open learning units in sustainable technology. In: 2nd Regional Conference on Engineering Education , 2007, Johor.

Giuma, Badreddin and Osman, Kahar and Abdul Kadir, Mohamed Rafiq (2009) Analysis of fluid-structure interaction in abdominal aortic aneurysm with high and normal blood pressure. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Golshokouh, I. and Wira, J. Y. and Ani, Farid Nasir and Syahrullail, Samion (2012) Palm fatty acid distillate as an alternative source for hydraulic oil. In: 3rd International Conference on Mechanical and Manufacturing Engineering 2012, 20-21 November, 2012, Malaysia.

H. H., Tang (2005) Integrated motion planning and control of nonholonomic wheled mobile robot. In: 9th Int. Nonf. Of Mechatronics Technology, 2005.

H. Idris, M. and Ourdjini, A. and Hamzah, E. and J. Clegg, A. (2003) Grain refinement of an investment cast magnesium based alloy using inmould and vibration techniques. In: 14th Sceintific Conference & 13th Annual General Meeting Electrin Microscopy Society of Malaysia, 2003, The City Bayview Hotel. Langkawi, Kedah.

Hamad, S. and Nozue, A. and Tamin, M. N. (2000) Fatigue crack growth mechanisms of cast Ti-48Al (at. %) alloy. In: Structures and Materials.

Hamid, N. H. B. and Hamzah, Esah (1999) Formability of Chromate Conversion Coating on Zinc Electroplated Steel Sheet. In: International conference on computer methods and experimental measurments for surface treatment , September 1999, Itali.

Hamzah, E. (2005) Hydrogen attack on heat treated-titanium aluminides. In: 2nd Asean Science Congress and Sub Committee Conf. on Material Science and Technology, 2005, Jakarta, Indonesia.

Hamzah, E. and Izman, S. and Khoo, C. Y. and Zainal Abidin, N. N. (2007) Preliminary study on rotary ultrasonic machining of Bk-7 optical glass rod. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Hamzah, E. and Izman, S. and Khoo, C. Y. and Zainal Abidin, N. N. and Tan, M. J. (2007) Effect of machining parameters on Bk-7 optical glass using conventional and rotary ultrasonic machines. In: 2nd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 2007, Osaka.

Hamzah, E. and Suardi, Khairmen and Ourdjini, A. (2003) Corrosion behavior of heat treated gamma-based titanium aluminide after hydrogen attack under immersion In 1.0M sulphuric acid solution. In: 13th Sceintific Conference & 13th Annual General Meeting Electrin Microscopy Society of Malaysia, 2003, The City Bayview Hotel. Langkawi, Kedah.

Hamzah, E. and Purniawan, A. and Toff, M. R. M. (2007) The adhesion and tribology analysis of polycrystalline diamond coated on Si3N4 substrate. In: National Metallurgical Conference, 26-27 Nov 2007, The Putri Pacific Hotel. Johor Bahru, Johor.

Hamzah, Esah Analysis of Nucleation and bond morphology of nanocrystalline diamonds deposited on tungsten carbide using HFCVD. In: UNSPECIFIED.

Hamzah, Esah (2012) Effect of ageing treatment on the microstructures of Ti-50.7at.%Ni shape memory alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Hamzah, Esah (2012) The effects of quenching media on the microstructures and properties of Cu-Al-Ni shape memory alloys. In: The 21st Scientific Conference of the Microscopy Society of Malaysia, 21 November, 2012, Kelantan, Malaysia.

Hamzah, Esah (2012) Efffect of surface pretreatment on nanocrystalline diamond ballas morphology. In: Invited Paper : Nanomaterials Technology Specialised Conference 2012, AMTEC -UTM, 6-7 March 2012, 2012.

Hamzah, Esah (2012) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9th to 12th July 2012, Kuala Lumpur, Malaysia.

Hamzah, Esah (2012) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), 9-10 December 2012, Seoul, Korea.

Hamzah, Esah (2013) Grain size effects on the oxidation of Fe-33Ni-19-Cr alloy at 700 ºC. In: 3rd International Conference & Exhibition on Sustainable Energy & Advanced materials 2013 (ICE-SEAM 2013) Melacca, 2013.

Hamzah, Esah (2012) High temperature creep behavior of austenitic Fe-Ni-Cr alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 7-12 July 2012, Kuala Lumpur, Malaysia.

Hamzah, Esah (2012) Inhibition of biofilm formation using conductive polymers. In: Invited Paper: The 3rd International Conference on Engineering & ICT (iCEi2012), 2012.

Hamzah, Esah (2007) Titanium aluminides: oppurtunities and challenges. In: 3rd Colloquium On Postgraduate Research National Postgraduate Colloquium On Materials, Minerals and Polymers, 10-11 April 2007, Vistana Hotel, Penang.

Hamzah, Esah and Amrin, Astuty (2012) Effect of solution treatment temperature on the microstructures of Fe-Ni-Cr alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Hamzah, Esah and Kang, Kim Ang (2007) A study on workability of impressed current cathodic protection system on non-permanently submerged/buried structures by the introduction of conductive compound. In: National Metallurgical Conference, 26-27 Nov 2007, The Putri Pacific Hotel. Johor Bahru, Johor.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) Atomic force microscopic studies of tin-coated tool steel at various N2 gas flow rates using CAE PVD technique. In: The 2nd International Conference on Solid State Science and Technology, 2006, Grand Continental Hotel, Terengganu.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) The effect of metal ion etching on the mechanical and tribological properties of tin coated tool steel using CAE PVD technique. In: Fifth International Materials Technology Conference & Exhibition, 2006, n/a.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) Effect of substrate bias voltage on the surface characterization of tin-coated HSS using CAPVD technique. In: Regional Postgraduate Conference on Engineering and Science , 2006, Skudai, Johor.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) Effect of substrate temperature on microstructural and mechanical properties of tin-coated tool steels. In: Proceedings of the International Conference on Manufacturing Science and Technology 2006, 2006, Melaka.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) Effect of TiN thickness on the surface roughness deposited using cathodic arc evaporation PVD technique. In: Conference On Manufacturing & Electronic Technology (COMET 2006), 2006, UTM.

Hamzah, Esah and Mubarak, A. and Toff, M. R. M. (2006) Surface characterization and adhesion strength of tin coating synthesized on HSS using cathodic arc evaporation PVD technique. In: 14th International Conference on the Strength of Materials, 2006, Xian, China.

Hamzah, Esah and Mudang, Maureen and Khattak, Muhammad Adil (2013) Effect of variation in microstructures on high temperature creep of Fe-Ni-Cr superalloy. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13) Korea.

Hamzah, Esah and N. Parimin, Esah and Astuty Amrin, Esah (2013) Effect of grain size on the isothermal oxidation of Fe-33Ni-19Cr alloys At 700 ºc. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013)Johor Bahru, 2013, Johor Bahru.

Hamzah, Esah and Purniawan, A. and Toff, M. R. M. (2006) The pretreatments and microwave power effect on nucleation and growth of polycrystalline diamond coated Si3N4. In: Regional Postgraduate Conference on Engineering and Science , 2006, Skudai, Johor.

Hamzah, Esah and Purniawan, A. and Toff, M. R. M. (2007) Surface roughness and morphology analysis using an Atomic Force Microscopy of polycrystalline diamond coated Si3N4 deposited by microwave plasma assisted chemical vapor deposition. In: International Conference on Materials for Advanced Technologies (ICMAT2007), 2007, Singapore.

Hamzah, Esah and Tamin, Mohd. Nasir (2007) Microstructural, mechanical characterisation and fractography of as-cast ti-al alloy. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Hamzah, Esah (2013) The influence of gamma-radiation on the structure and properties of the Cu-11.5wt%-Al-4%wt Ni shape memory alloy. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013), 2013, Johor Bahru.

Hamzah, Esah (2013) Synthesis and characterisation of polyaniline-polypyrrole composite. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013), 2013, Johor Bahru.

Hamzah, Esah (2013) Effect of solution annealing and low temperature ageing on the microstructures and superelastic behaviour of Ti-50.7%Ni alloy. In: 2nd International Conference on Metallurgy Technology and Materials 2013 (ICMTM 2013) Hong Kong.

Hamzah, Esah (2013) Effects of various seeding methods on multi-layered diamond coatings deposited via hot filament chemical vapor deposition. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013)Johor Bahru.

Hamzah, Esah and Kurnia Hastuti, Esah and Esah Hamzah, Esah and Jasmi Hashim, Esah (2013) Effect of ageing temperature on the microstructures and mechanical properties of Ti-Nb shape memory alloy. In: 3rd International Conference on the Advancement of Materials and Nanotechnology 2013 (ICAMN111 2013) Penang, 2013, Penang.

Hamzah , Esah (2013) Characterisation of Zeolite, Polyaniline and Zeolite/Polyaniline As antifouling Materials for Marine Applications. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013).

Hamzah, Esah and Prayitno, Dody and Mohd. Ghazali, Mohd. Zulkifli (2001) Effect of mould tilt angles on the mechanical properties of as-cast al-si alloy. In: International Conference and Exhibition on Advances in Production and Processing of Aluminium, 2001, Bahrain.

Haron, Habibah @ Norehan Does motivation affect students’ understanding and performance in engineering statics? In: UNSPECIFIED.

Haron, Habibollah (2006) Interface requirement characterization of robot simulation software. In: Proceedings of International Conference on Man-Machine Systems 2006, 2006, n/a.

Haron, Habibollah and Mohd. Azmi, Nurulhuda Firdaus and Ibrahim, Nuzulha Khilwani (2006) Modeling an appointment scheduling for vehicle inspection center. In: Regional Postgraduate Conference on Engineering and Science (RPCES 06), 2006, n/a.

Haron, Habibollah and Mohd. Azmi, Nurulhuda Firdaus and Ibrahim, Nuzulha Khilwani (2006) Vehicle inspection centre appointment scheduling : a solution. In: Proc. Postgraduate Annual Research Seminar 2006 (PARS 2006) , 2006.

Harun, Muhamad Noor (2013) Influence of lubrication performance on wear factor in metal-on-metal hip joint replacement using numerical analysis. In: The Malaysian International Tribology Conference 2013, MITC2013, 18th to 20th November 2013, 2013, Kota Kinabalu, Sabah.

Hashemi-Dehkordi, S.M. and Mailah, M. and Abu-Bakar, A. R. (2009) Suppressing noise and vibrations in the disk brake system by a robust active control method. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM09), 2009, Melaka.

Hassan, Adnan (2005) Recognition of developing cotrol chart pattern using ANN and stability tests. In: BIC'05 Int. Symposium on Bio-Inspired Computing, 2005.

Hassan, Adnan and Md. Yusof, Aminah and Omar, Ismail and Tiong, Ong Chee (2007) Towards successful inculcation of generic skills: issues and strategies. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Hassan, M. A. and Mehat, N. S. and Sharif, S. and Daud, R. and Tomadi, S. H. and Reza, M. S. (2009) Study of the surface integrity of AISI 4140 steel in wire electrical discharge machining. In: Proceedings of the International MultiConference of Engineers and Computer Scientists IMECS 2009, 2009, Hong Kong.

Hassan, Mohamad Yusri and Alabakhshizadeh, Abuzar and Abdullah, M.P. and Hussin, Faridah and Majid, S. (2009) Generators bidding strategies in competitive electricity market. In: International Conference Electrical Energy and Industrial Electronic Systems (EEIES 2009) , 2009, Parkroyal, P. Pinang.

Hassan, Wan Haslina (2013) A comparative signaling cost analysis of macro mobility scheme in NEMO with mobility management protocol. In: 5th International Conference on Mechatronics ICOM'13, 2013.

Hassan , Adnan (2013) Decision support tool for job shop scheduling with job cancellation. In: International Conference on Engineering of Tarumanagara (ICET 2013).

Hayati Abdullah, (2013) A study on the effect of exhaust gases on the indoor air quality onboard ships. In: Applied Mechanics And Materials.

Helmi, Syed Ahmad (2013) Motivation and learning strategies: promising outcomes of cooperative problem-based learning. In: 4th International Research Symposium on Problem Based Learning 2013, 2013.

Hemdi, Abd. Rahman and Mat Saman, Muhamad Zameri and Sharif, Safian (2009) Proposed decision making framework for sustainable product design evaluation. In: 10th Asia Pacific Industrial Engineering & Management System Conference (APIEMS 2009), 2009, Kitakyushu, Japan.

Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Sharif, Safian (2009) Indicator for measuring sustainable product design: a review and further research. In: 1st International Congress on Sustainability Science and Engineering (ICOSSE09), 2009, Cincinnati, USA.

Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Sharif, Safian (2009) An indicator for measuring sustainable product design: a review and future research. In: Conference on Scientific and Social Research CSSR2009, 2009, Shah Alam, Selangor.

Henry Nasution, (2013) Numerical study of ejector as an expansion device in split-type air conditioner. In: Applied Mechanics And Materials.

Henry Nasution, (2013) Performance study of DC compressor for automotive air conditioning system. In: Advances In Power And Electrical Engineering, Pts 1 And 2.

Henry Nasution, (2013) Retrofitting R-22 split type air conditioning with hydrocarbon (HCR-22) refrigerant. In: Applied Mechanics And Materials.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd. Husin, Mohd. Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie and Ani, Farid Nasir (2003) Carbon adsorbent from waste materials (coconut shell, oil palm shell, plastic bag) for hydrocarbon gas storage. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Herawan, Safarudin Ghazali (2003) Utilization of oil palm sell by converting into carbon molecular sieve for separation of methane from carbon dioxide as a waste minimization. In: Proceedings Environments 2003-Environmental Management And Sustainable Developmant For Better Future Growth, 2003, The Bayview Beach Resort. Batu Feringghi Beach. Penang.

Hudha, Khisbullah (2003) Moving Centre Point (MCP): Preliminary Study of A New Modified Search Method for Parameters Optimizaion. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Hudha, Khisbullah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan (2003) Handling analysis of a passenger car based on simulation and experimental studies. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Husain, Abdul Rashid (2013) Time varying formation control for nonholonomic wheeled mobile robot via synchronization. In: 9th Asian Control Conference ASCC 2013, 2013.

Husain , Abdul Rashid (2013) An analysis of CAN-based steer-by-wire system performance in vehicle. In: IEEE International Conference on Control System, Computing and Engineering, 2013, Penang, Malaysia, 2013.

Husien, Abdul Chalid (2005) Vessel characteristics for inland waterways transport. In: CEIAT Int. Conf. on Innovation and Integration in Aerospace Science, 2005, Johor Bahru.

Hussain, A. and Ani, F. N. and Darus, A. N. and Mustafa, A. and Salema, A. A. (2005) Simulation studies of gas-solid in the riser of a Circulating Fluidized Bed. In: Proceedings of the 18th International Conference on Fluidized Bed Combustion.

Hussain, Ahmad (2005) Combustion studies of the oil palm shell waste powder in a circulating fluidized bed combustor(CFBC) - influence of primary air and CFBC temperatures on emissions. In: The International Energy Conference, 2005, Jakarta, Indonesia.

Hussain, Ahmad (2005) Computer modelling of a minicipal solid waste combustor for different fuel mixtures. In: 3rd Regional Symposium on Environment and Natural Resources (RCENR II), 2005, Kuala Lumpur.

Hussain, Ahmad (2005) Fluidization characteristics of a circulating fluidized bed. In: National Conference On Advances In Mechanical Engineering, 2005, Kuala Lumpur.

Hussain, Ahmad (2005) Hydrodynamics of a circulating fluidized bed. In: Int. Conf. on Recent Advance in Mechanical & Materials Engineering, 2005, Kuala Lumpur.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin (2005) A gas solid riser experiment for fundamental studies of turbulent multiphase flow. In: Malaysian Science & Technology Congress, 2005, Kuala Lumpur.

Hussain, Mohammad Sakhawat (2010) Nano-mechanical characterization of nanocrystalline ni directly plated on aluminium. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010, KLCC, Kuala Lumpur, Malaysia.

Hussain, Mohammad Sakhawat (2010) Syntheis of nano-crystalline semi-conductor materials by bottom-up and top-down approaches. In: Bangladesh Chemical Congress 2010, 33rd Chemical Conference of Bangladesh Chemical Society, 10 -12 Decemeber 2010.

Hussain, Mohammad Sakhawat (2010) Synthesis and characterization of aggregated nano-cobalt particles by a bottom up approach. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010.

Hussain, Mohammad Sakhawat (2010) Synthesis of advanced Ni-Cr alloys by high temperature diffusion heat treatment. In: MS&T Annual Meeting (Materials Science and Technology) , 17-22 October 2010.

Hussain, Mohammad Sakhawat and Hezaveh, Hadi and Fazali, Alireza and Esmaeli, Elahe (2010) Experimental invstigation on rheology of nano-partcles dispersed in paraffin. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010, KLCC, Kuala Lumpur, Malaysia.

Hussein, Mohamed (2010) Modelling and control of a worm-like micro robot with active force control capability. In: World Congress on Engineering 2010, 30 June-2 July 2010 , London, United Kingdom.

Hussein, Mohamed and Moore, Philip and Jun-Sheng, Pu and Chi-Biu, Wong (2007) Quadrature encoder signal emulation for integrated real-virtual environments and systems. In: International Conference on Intelligent and Advanced Systems 2007, 2007, Kuala Lumpur.

Hussein A. Mohammed, (2013) Combined convection heat transfer of nanofluids flow over forward facing step in a channel having a blockage. In: Applied Mechanics And Materials.

Hussein A. Mohammed, (2013) Effect of inclination angle on three-dimensional combined convective heat transfer of nanofluids in rectangular channels. In: Applied Mechanics And Materials.

Hussein A. Mohammed, (2013) Effect of vertical baffle installation on forced convective heat transfer in channel having a backward facing step. In: Applied Mechanics And Materials.

Ibn Awal, Zobair and Islam, M. Rafiqul (2008) A study on ship capsizing due to collision. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ibrahim, Mohd Halim Irwan and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Mohamed Nor, Norhafiez and Ibrahim, Murtadhahadi (2008) Pengoptimuman parameter dalam pengacuan suntikan logam mikro (µMIM). In: Seminar AMREG 08, 12 Jun 2008, Seremban, Malaysia.

Ibrahim, Sallehuddin (2005) Two phase flow measurement using infra red sensors. In: Malaysian Science & Technology Congress, 2005, Cititel Midvalley. Kual Lumpur.

Idris, Mohd Hasbullah (2013) Relationship between secondary phase and corrosion properties of biodegradable Mg-based alloys. In: 5th BioMetal Symposium on Biodegradable Metals, 2013, 2013.

Idris, Mohd. Hasbullah and R., Ahmad and M. Y., Hashim (2010) Design sensitivity analysis of squeeze casting process. In: 2010 The 2nd International Conference on Computer and Automation Engineering, ICCAE 2010, 2010, Singapore.

Idris, Mohd. Hasbullah and Sharif, Safian (2012) Differential ceramic shell thickness evaluation for direct rapid investment casting. In: The 3rd International Conf. On Mechanical and Manufacturing Engineering (ICME 2012), 20-21 November 2012, Batu Pahat, Johor.

Idris, Siti Rabiatull Aisha and Qurdjini, A. and Astuty, A. (2009) Effect of bismuth percentage on intermetallic compound formation with immersion silver and copper surface finishes. In: International Conference on Electronics Materials and Packaging (EMAP-2009), 2009, Hotel Gurney Resort, P. Pinang.

Idris, Siti Rabiatull Aisha and Qurdjini, Ali (2009) Effect of multiple retlow on intermetallic compound formation on copper and immersion silver surface finishes. In: International Conference for Technical Postgraduates Symposium (TECHPOS 09), 2009, Legend Hotal, Kuala Lumpur.

Intan Zaurah Mat Darus, (2013) Application of multilayer perceptron and radial basis function neural network in steady state modeling of automotive air conditioning system. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Intan Zaurah Mat Darus, (2013) Dynamic modeling of an automotive air conditioning system and an auto tuned PID controller using extremum seeking algorithm. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) Fuzzy-pid control of transverse vibrating pipe due to vortex induced vibration. In: UKSIM-AMSS 15th International Conference On Computer Modelling And Simulation (UKSIM 2013).

Intan Zaurah Mat Darus, (2013) Genetic algorithm identification for automotive air-conditioning system. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) Intelligent PID controller using iterative learning algorithm for active vibration controller of flexible beam. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) Modeling flexible plate structure system with free-free-clamped-clamped (FFCC) edges using particle swarm optimization. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) Non-parametric neuro-model of a flexible beam structure. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) Particle swarm optimization for identification of a flexible manipulator system. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) PID controller for idle speed control. In: Proceedings - UKSim 15th International Conference on Computer Modelling and Simulation, UKSim 2013.

Intan Zaurah Mat Darus, (2013) Self-tuning PID controller for active suspension system with hydraulic actuator. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Intan Zaurah Mat Darus, (2013) System identification of flexibly mounted cylindrical pipe due to vortex induced vibration. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Ishak, Iskandar Shah (2006) Computational fluid dynamics simulation and wind tunnel testing on microlight model. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ishak, Iskandar Shah and Mansor, Shuhaimi and Mat Lazim, Tholudin Experimental research on helicopter tail shake phenomenon. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Iskandar Shah and Mat Lazim, Tholudin and Mansor, Shuhaimi Wind tunnel tests on a generic eurocopter 350Z helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2006) Noxious emission reduction from liquid fuel burner via air staging method. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2008) The influence of orifice insertion in radial swirling flow for low emissions combustion. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Iskandar Shah and Mansor, Shuhaimi and Mat Lazim, Tholudin and Abd, Muhammad Riza (2009) Preliminary numerical analysis on helicopter main-rotor-hub assembly wake. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009 , 2009, Taman Safari, Bogor, Indonesia.

Ishak, Iskandar Shah and Mansor, Suhaimi and Mat Lazim, Tholudin and Abd Rahman, Muhamad Riza (2009) Numerical analysis of helicopter tail shake phenomenon : a preliminary investigation. In: 2nd International Conference on Engineering Technology (ICET 2009), 2009, Hotel Legend, K. Lumpur.

Ishak, Mohamad Shaiful Ashrul and Abdullah, Hayati and Mohd. Ja'afar, Mohammad Nazri (2007) The effect of staged combustion in reduction of noxious emissions for agricultural residues using a fluidized bed combustor. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Crowne Plaza Riverside Hotel, Kuching, Sarawak,.

Islam, Mohammad Rafiqul and Ibn Awal, Zobair and Hoque, Md. Mazharul (2007) Marine vehicle accident characteristics in bangladesh: study on collision type accidents. In: Proceedings of the International Conference on Mechanical Engineering 2007 (ICME 2007), December 30,2007-January 1, 2008, Dhaka, Bangladesh.

Islam, Mohammad Rafiqul and Ibn Awal, Zobair and Sadiqul Baree, M. (2007) Development of a mathematical model for analysis on ship collision dynamics. In: Proceedings of the 7th International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka.

Ismail, Al Emran and Othman, Akbar (2006) Energy absorption performance of conical natural fiber reinforced composites Abstract. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ismail, R. and Ismail, A. Y. and Mat Darus , I. Z. (2006) Identification algorithms of flexible structure using neural networks. In: Scored 2006 - Proceedings of 2006 4th Student Conference on Research and Development "Towards Enhancing Research Excellence in the Region", Malaysia.

Ismail, Mohammad and M. Noor, Norhazilan and Hamzah, Esah (2007) Corrosion behaviour of dual-phase and galvanized steel in concrete. In: The 1st International Conference of European Asian Civil Engineering Forum, 2007, Indonesia.

Ismail, Nasrudin Development of ICT-based training module to enhance the awareness of Malaysian fishermen on engineering, science, technology, quality, and safety. In: UNSPECIFIED.

Ismail, Syuhaida (2013) Buildability and maintainability in final account closing: the greatest challenge for construction industry. In: The 2013 International Symposium on Business and Social Sciences (ISBSS 2013).

Ismail, Issham and A. Manan, Muhammad (1997) Projek penggunaan hematit tempatan sebagai bahan pemberat lumpur penggerudian: utamakan keselamatan. In: Seminar Kebangsaan Teknologi Makmal , 20-21 Oktober 1997, Universiti Sains Malaysia, Penang, Malaysia.

Ismail, Issham and Ikhsan, Azman (1997) Kajian aliran dua fasa dengan menggunakan model berskala makmal. In: Seminar Kebangsaan Teknologi Makmal ke-3, 20-21 Oktober 1997, USM, Pulau Pinang.

Israr Ahmad, Haris Ahmad and Dahalan, Md. Nizam (2008) Estimation of lift and drag characteristics of UTM elang-1 UAV. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Izman, S. and Tamin, M. N. and Mon, T. T. and Venkatesh, V. C. and Shaharoun, A. M. (2007) Stagnant zone formation on diamond cutting tools during machining. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Izman Sudin, (2013) Effect of process parameters on quality of cold spinned tube head. In: Applied Mechanics And Materials.

J. M., Rohani and S. M., Yusof and I., Mohamad (2009) The relationship between statistical process control critical success factors and performance: a structual equation modeling approach. In: IEEE International Conference on Industrial Engineering and Management IEEM 2009, 2009, Hong Kong.

Jafari, Hasan and Idris, Mohd. Hasbullah and Ourdjini, Ai and Ahmadshoar, V. (2009) Influence of gating system, sand grain size and mould coating on microstructure and mechanical properties of thin wall ductile iron. In: International conference on Advances in Materials and Processing Technologies (AMPT 2009), 2009, UIA, Gombak, Selangor.

Jahan Abadi, Hossein and Kazi, Suhail and Mailah, Musa and Mohd. Zain, Mohd. Zarhamdy (2007) Robust motion control of human-like arm for precise trajectory tracking task. In: Proceedings of the International Conference on Robotics, Vision, Information and Signal Processing (ROVISP 2007), 2007, Park Royal, Penang.

Jahanabadi, Hossein and Mailah, Musa and Md. Zain, Mohd. Zarhamdy (2009) Active control of a robotic arm with pneumatic artificial muscle actuator. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Jahanabadi, Hossein and Mailah, Musa and Md. Zain, Mohd. Zarhamdy (2009) Modeling and control of a nonlinear pneumatic artificial muscle using active force control. In: The 2nd International Conference on Control, Instrumentation and Mechatronic Engineering (CIM2009), 2009, Melaka, Malaysia.

Jamaluddin, Hishamuddin (2012) Modeling and validation of 7-DOF ride model for heavy vehicle. In: International Conference on Automotive, Mechanical and Material Engineering (ICAMME'2012) Penang, Malaysia May 19-20, 2012., 2012.

Jamaluddin, Hishamuddin (2012) Non-pressurized magnetorheological damper controlled using Fuzzy Semi Active Damping Force Estimator (fSADE). In: International Conference on Applications and Design in Mechanical Engineering 2012, 2012.

Jamaluddin, Hishamuddin (2012) Stability augmentation system of active suspension system in electric vehicle conversion: towards optimal ride comfort performance. In: International Conference on Applications and Design in Mechanical Engineering 2012, 2012.

Jamaluddin, Hishamuddin (2013) Study on the potential application of smart fluid material in suspension system. In: The 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013). 30 - 31 October 2013., 2013, Melaka International Trade Center, Malaysia.

Jamaluddin , Hishamuddin (2013) Hybrid skyhook-stability augmentation system for ride quality improvement of railway vehicle. In: The 2nd International Conference on Recent Advances in Automotive Engineering & Mobility Research.

Jamaluddin Md. Sheriff, (2013) The effect of wavy groove liner on pressure distribution of journal bearing. In: Applied Mechanics And Materials.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis (2007) Temperature influence to the injection molding of fine and coarse SS316l powder with PEG, PMMA and stearic acid binder system. In: Proceeding of Malaysian Symposium on Advances in Powder Metallurgy & Particulate Materials 2007, 21-22 August 2007, Faculty of Mechanical Engineering, University Technology MARA.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Abdullah, Shahrir and Hussain Ismail, Muhammad (2007) Influence of temperature to the injection molding of bimodal powder mixtures. In: World Engineering Congress 2007, 5–9 August 2007, Pulau Pinang.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Ibrahim, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Analisis taburan saiz partikel serbuk SS316L bagi kegunaan proses penyuntikan acuan logam. In: Seminar I - AMReG 08, 12th June 2008, Seremban, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Ibrahim, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Kajian prestasi penyahikatan larutan dengan menggunakan kaedah taguchi. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Ibrahim, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Pengaruh tekanan penyuntikan, suhu penyuntikan dan beban serbuk terhadap ketumpatan jasad anum: analisis varian. In: Seminar I - AMReG 08, 12 June 2008, Seremban, Malaysia.

Jamaludin, K. R. and Muhamad, N. and Ab. Rahman, M. N. and M. Amin, S. Y. and Ahmad, S. and Ibrahim, M. H. I. (2009) Sintering parameter optimisation of the SS316L Metal Injection Molding (MIM) compacts for final density using taguchi method. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Jamaludin, M. R. and Abu Bakar, A. R. and Rahman, R. A. (2009) An experimental investigation of friction material performance. In: International Conference on Advances in Mechanical Engineering (ICAME09), 2009, Concorde Hotel, Shah Alam, Selangor.

Jamaludin, Mohd. Rahimi and Abu Bakar, Abdul Rahim and Abd. Rahman, Roslan (2009) A preliminary investigation of disc brake sequeal using a brake dynamometer. In: International Conference on Recent and Emerging Advanced Technologies in Engineering (iCREATE 2009), 2009, Pan Pasific KL International Airport Hotel, Sepang.

Jamei, Saeed and Maimun, Adi and Mansor, Shuhaimi and Priyanto, Agoes and Nor Azwadi, Nor Azwadi (2012) Aerodynamic behavior of a compound wing configuration in ground effect. In: Proceedings of The 6th Asia-Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Universiti Teknologi Malaysia, Johor.

Jaswar, (2013) Designing fuzzy backstepping adaptive based fuzzy estimator variable structure control: applied to internal combustion engine. In: Applied Mechanics And Materials.

Jaswar, Jaswar (2013) Comparative of hydrodynamic effect between double bodies to single body in tank. In: Proceedings of the 8th International Conference on Numerical analysis in Engineering.

Jaswar, Jaswar (2013) Study of fluid flow characteristic around round-shaped FPSO using RANS method. In: Proceedings of the 8th International Conference on Numerical Analysis in Engineering, 2013.

Jaswar, Jaswar (2013) Vortex-induced vibration of riser caused by external load. In: The 12th Asian International Conference on Fluid Machinery, 2013.

Jazair, Wira and Hisyam, Mohd. Nor (2009) Utilization of waste cooking oil as diesel fuel and improvement in combustion and emission. In: 2nd International Meeting of Advances in Thermofluids - IMAT 2009, 2009, Bogor, Indonesia.

Jin Feng, Goh (2005) Solar thermal driven absorption cooling system. In: Int. Conf. on Recent Advance in Mechanical & Materials Engineering, 2005, Kuala Lumpur.

Joy Rizki Pangestu Djuansjah, (2013) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: Advanced Materials Research.

Jusoh, Iberahin and Alias, Amran and Abd Kader, Ab Saman (2004) Maintaining The Standard: Full Time And Part Time Programs At Mechanical Engineering Faculty, UTM. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

K, Li Wei and Mat Saman, Muhamad Zameri and L, Meng Chiao Development of green design framework for Malaysian automotive industries. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

K. Mandal, Nirmal and Leong, M.Salman and Abd.Rahman, Roslan (2005) A new strategy for far-field power transmission in outhotropic plates. In: 12th Asia-Pasific Vibration Conference, 6-9 August, 2005, Langkawi, Malaysia.

Kahar Osman, (2013) Computational simulation of boil-off gas formation inside liquefied natural gas tank using evaporation model in ansys fluent. In: Applied Mechanics And Materials.

Kamarudin, Kamarul Azhar and Ani, Farid Nasir and Mohd. Jaafar, Mohammad Nazri and Raghavan, Vijay R. (2007) Pollution reduction from spray combustion of diesel fuel using air staging technique. In: 6th Asia Pasific Conference on Combustion (ASPACC 07), 2007, Nagoya Congress Center, Nagoya, Japan.

Kamarul Asri, A. and Hamzah, Esah (2012) Corrosion behaviour of lead-free and Sn-Pb solders in 3.5wt% NaCl. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 7-12 July 2012, Kuala Lumpur, Malaysia.

Kamitani, S. and Nakanishi, K. and Matsushita, T. and Syahrullail, S. (2009) Measurement of friction coefficient under bulk plastic deformation in plane strain extrusion test. In: World Tribology Congress 2009 - WTC2009, 2009, Kyoto International Conference Centre, Japan.

Kamsah, Nazri (2012) Application of thermal energy storage system for a lowland greenhouse. In: The 5th International Conference on Advances in Thermal-Fluid, 2012.

Kamsah, Nazri (2012) Stability of cementless hole and non-hole hip prosthesis. In: 2012 International Conference on Biomedical Engineering (ICoBE), 2012.

Kamsah, Nazri (2013) Estimation of thermal comfort in a classroom using numerical method. In: 6th International Meeting on Advances in Thermofluids (IMAT 2011) IMAT 2013, , Singapore, 18-19 November 2013.

Karimian, Majid and Ourdjini, Ai and Idris, Mohd. Hasbullah and A. Asmael, Mohammed Bsher (2009) Effect of pouring temperature and melt treatment of AL-Si LM6 alloy (LFC) on microstructure. In: International Conference on Advanced in Materials and Processes Technologies (AMPT 2009), 2009, Hotel Legend, Kuala Lumpur.

Kassim, Khairul Anuar and Niroumand, H. (2010) Earth bricks with wood chips as sustainable materials. In: 7th International Materials and Technology Conference and Exhibition, IMTCHE 2010, 13-16 June 2010, Sarawak, Malaysia.

Kazi, Suhail (2012) Robust active force controller for an automotive brake system. In: IEEE Xplore Digital Library / 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 2012.

Khairudin, M. and Mohamed, Z. and Zain, Z. M. and Mohd. Hashim, A. W. I. (2009) Modelling of a two-link flexible manipulator. In: The 2nd International Conference on Control, Instrumentation & Mechatronic Engineering (CIM 2009) , 2009, Melaka, Malaysia.

Khan, Shah Fenner and Salleh, Ahmad Faizal and Sharif, Safian and Mohamad, Zulkepli and A. Rashid, Zulkifli and Murad, Muhamad Nasir (2006) A preliminary study on FDM prototype surface roughness. In: Proceeding of Malaysian Technical Universities Conference Engineering and Technology 2006, MUCET 2006, 19th - 20th December 2006, Kolej Universiti Teknologi Tun Hussein Onn, Johor.

Khattak, M. A. and Maslan, M. H. and Tamin, M. N. (2007) Effect of absorbed hydrogen on crack-tip ductility in the welded A516 steel. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Khattak, Muhammad Adil (2013) Effect of solution annealing and low temperature ageing on the microstructures and superelastic behaviour of Ti-50.7at.%Ni Alloy. In: 2nd International Conference on Metallurgy Technology and Materials (ICMTM 2013), June 25- 26, 2013, 2013.

Khattak, Muhammad Adil and Tamin, Mohd N (2013) Effects of thermal aging and absorbed hydrogen on fatigue crack growth behavior of welded C-Mn steels. In: 2nd International Conference on Mechanical, Electronics and Mechatronics Engineering (ICMEME'2013), 17th to 18th June 2013, London, United Kingdom.

Kimsin, Intan Noryanah and Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2008) Development of a burning rate test rig for solid propellant performance investigation. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kobayashi, Akira (2013) Metallic glass coatings fabricated by gas tunnel type plasma spraying. In: The 9th International Symposium of Applied Plasma Science, 23-27th September 2014, 2013, Istanbul, Turkey.

Koloor, S. S. R. and Tamin, Mohd. Nasir (2012) Effects of lamina damages on flexural stiffness of CFRP composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8), 6-8 November 2012, Kuala Lumpur, Malaysia.

Krishnan, S and Lee, Choong-Won Development of a 100-n hydrogen peroxide rocket engine. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Krishnan, S. and Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2009) Design, modelling and performance prediction of hydrogen peroxide monopropellant thruster. In: 7th International High Energy Materials Conference & Exhibit (HEMCE-2009), 2009, Pune, India.

Kuan, Yew Wong and Behrouzi, Farzad and Chuen, Tse Kuah (2010) Supplier selection based on leagility : using fuzzy membership value. In: ICISE 2010 : International Conference on Industrial and Systems Engineering, 25-27 August 2010 , Singapore.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) Application of data envelopment analysis to assess quality management efficiency. In: ICISE 2010 : International Conference on Industrial and Systems Engineering, 25-27 August 2010, Singapura.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) A fuzzy-based model to measure supplier performance with lean attributes. In: Asia Modeling Syposium 2010 (AMS 2010), 26-28 Mei 2010, Kota Kinabalu, Sabah.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) A review on Data Envelopment Analysis (DEA). In: AMS2010: Asia Modelling Symposium 2010 - 4th International Conference on Mathematical Modelling and Computer Simulation, 26-28 May 2010, Kota Kinabalu, Malaysia.

Kuan, Yew Wong and Wai, Peng Wong and Delgado-Hernandez, David Joaquin (2010) An investigation of knowledge management in an adhesive manufacturing company. In: 14th International Business Information Management Association (IBIMA) Conference, 23-24 June 2010, Istanbul, Turkey.

Kueh, Ahmad Beng Hong (2013) Comparative study of conventional and slant end-plate connection subjected to elevated temperature. In: The 9th International Conference of Geotechnical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD) – GEOCON2013.

Kurdi, Ojo and Abd. Rahman, Roslan and Tamin, Mohd. Nasir Stress analysis of heavy duty truck chassis using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kurniawan, Denni (2012) Effect of strain rate and temperature on elastic properties of PCL/starch. In: Proceedings of the 8th Asian-Australasian Conference on Composite Materials, 2012.

Kurniawan, Denni (2012) Silane treatments on cellulose fabric/PLA composites. In: Proceedings of the 8th Asian-Australasian Conference on Composite Materials, 2012.

Lai, Zheng B. and Loh, Wei K. and Tamin, Mohd. Nasir (2009) Fatigue of Sn-4Ag-0.5Cu solder joints during cyclic bending of a BGA assembly. In: 11th International Conference on Electronics Materials and Packaging (EMAP 2009), 2009, Hotel Gurney, P.Pinang.

Latiff, Z. A. and Prabakaran, V. and Aziz, A. A. (2006) Sampling of unregulated components of a two-stroke, stepped-piston engine emission. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Lee, Chiing Khai and Abu Bakar, Abd. Rahim and Abdullah, Mohd. Shahrulizam (2007) Prediction of temperature distributions in a disc assembly using the finite element method. In: 5th Malaysian Friction Materials, 2007, n/a.

Li, Lijie and Ouyang, Huajiang and Abu Bakar, Abd. Rahim (2007) Numerical analysis of car disc brake squeal considering thermal effects. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture , 2007, UKM.

Lih-Heng, Chan and Salleh, Sh-Hussain (2009) Solving two-class classification problem using AdaBoost. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Lim, Meng Hee Detection of early changes in rotor dynamics of rotating machinery based on wavelet analysis. In: UNSPECIFIED.

Lin, Saw Chuan and Wan Mohd. Musyris, Wan Mohd. Musyris and Abu Bakar, Abdul Rahin and Abdul Ghani, Badri (2009) Finite element analysis of disc brake squeal and its suppression approach. In: International Conference on Applications & Design in Mechanical Engineering (ICADME 2009), 2009, Bayview Beach Resort, Batu Feringghi, P. Pinang.

Lintang, Hendrik Oktendy (2012) Energy audit of the buiding air-conditionin system. In: Proceedings Of 1St International Conference On Multiple-Governance In Islam, Environmental Development, And Cooperation (20-23 November 2012, Universiti Teknologi Malaysia, Johor Malaysia), 2012.

Lintang, Hendrik Oktendy (2013) Synthesis of inorganic copper(I) pyrazolate complexes for vapochromic chemosensors of benzene. In: The 26th Regional Symposium of Malaysia analytical Sciences (SKAM 26) 2013, 2013.

Lintang, Hendrik Oktendy (2013) Synthesis of novel amphiphilic silver(I) pyrazolate complex bearing amphiphilic side chains. In: Snic-Rsc Joint Symposium on Inorganic Chemistry 2013, 2013.

Loghmanian, Sayed Mohammad Reza and Ahmad, Robiah and Jamaluddin, Hishamuddin (2009) Multi-objective optimization of neural network structure for system identification using genetic algorithm. In: The 2nd International Conference on Control, Instrumentation and Mechatronic Engineering (CIM 2009), 2009, Melaka.

M. Amin, Sri Yulis and Muhamad, Norhamidi and Abdullah, Shahrir and Jamaludin, Khairur Rijal (2008) Kajian pengoptimuman penyahikatan larutan menggunakan kaedah permukaan sambutan. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Abdullah, Shahrir and Ab. Rahman, Mohd Nizam (2007) Rheological investigation of mim feedstocks prepared with different particle sizes. In: World Engineering Congress 2007, 5-9 August 2007, Pulau Pinang, Malaysia.

M. G., Normah (2003) New Technology: Thermoacoustic Heat Engine. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

M. G., Normah (2005) Outcome-based education-elixir or pain killer. In: Regional Conference on Engineering Education (RCEE 2005), 2005, Kuala Lumpur.

M. Nor, Norazman (2005) Physical response to blast impact. In: Int. Conf. on Defence Technology 2005, 2005, Kuala Lumpur.

M. Piah, M. Afendi and Darus, A. and Arief, Y. Z. and Hassan, Azman (2009) Electrical tracking and erosion properties of aged natural rubber-LLDPE blends. In: Putrajaya, 2009, Malaysia Polymer International Conference (MPIC2009).

M. Saqr, Khalid and M. Sies, Mohsin and S. Aly, Hossam and Abdul Wahid, Mazlan (2009) Characteristics of turbulent whirling flow in an asymmetric passage. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT 2009) , 2009, Taman Safari, Bogor, Indonesia.

Ma'aram, Azanizawati (2012) Optimization of rounded-shape floating LNG production and storage capacity using simulation modeling (part 1). In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro 2012), 2012.

Ma'aram, Azanizawati (2012) Optimization of rounded-shape floating LNG supply chain efficiency with simulation modeling. In: International Conference on Marine Technology, 2012.

Mahat, M. Mazwan and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Taib, Ishkrizat (2009) Study on the effect of stenting to aneurysms deformation. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Mahmod, Muhamad Ibrahim and Munisamy, Kannan M. (2006) Experimental Analysis of Ventilated Brake Disc with Different Blade Configuration. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mailah, Musa and Kwek, L. C. and Loo, Chu Kiong (2004) Active Force Control of a 5-link biped robot. In: Proceedings VRCAI 2004-ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Application in Industry, 28-31 Oct. 2002.

Mailah, Musa (2013) Tracking performance on feedfoward model base active force control of mobile manipulator using MATLAB and Adam. In: 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13), April 2-4, 2013, 2013, Kuala Lumpur, Malaysia .

Mailah, Musa and A., Noshadi and A., Zolfagharian (2010) Active force control of 3-RRR planar parallel manipulator. In: ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings, 2010, Singapore.

Mailah, Musa and Hashemi-Dehkord, Sayed Mahdi and Abu-Bakar, Abd. Rahim (2009) A robust active control method to reduce brake noise. In: 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008 , 21st - 26th Feb 2009, Bangkok, Thailand.

Mailah, Musa and Kazi, Suhail and Abadi, Hossein Jahan and Md. Zain, Mohd. Zarhamdy (2007) Modeling and control of a human-like arm with muscle flexibility. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Mailah, Musa and Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Optimal placement of piezoelectric actuator for active vibration control of flexible plate. In: Asia Modelling Symposium 2010 : 4th Asia International Conference on Mathematical Modelling and Computer Simulation , 15-17 Jun 2010, KLCC, Kuala Lumpur.

Mailah, Musa and Mat Darus, Intan Zaurah and Safizadeh, Mohammad Reza (2010) Calculating the frequency modes of flexible square plate using finite element and finite difference methods. In: Asia Modelling Symposium 2010 : 4th Asia International Conference on Mathematical Modelling and Computer Simulation , 15-17 Jun 2010, KLCC, Kuala Lumpur.

Mailah, Musa and Md. Zain, Zarhamdy and Kazi, Suhail and As'arry, A. and Mailah, Musa and Hussain, M. (2010) Performance evaluation of smart glove applied to experimental rig to control human hand tremor for parkinson disease. In: World Scientific and Engineering Academy and Society (WSEAS), 23-25 Mac 2010, Bayview Beach Resort, Pulau Pinang.

Mailah, Musa and Purnomo, Setyo (2003) Control of a nonholonomic mobile robot with adaptive active force control strategy. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Mailah, Musa and Tang, H. H. (2003) A simulation study on the hybrid intelligent active force control of a two-link planar robot. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Cars and Fof 2003-Malaysia, 2003, Kuala Lumpur, Malaysia.

Mailah , Musa (2013) AFC motor control using low cost and mobile data acquisition system with dsPIC30 microcontroller and lubin kerhuel blockset for MATLAB/Simulink. In: International Conference on Mechanical and Manufacturing Engineering (ICME2013), Putrajaya,17-19 December 2013 , 2013.

Mailah , Musa (2013) Algorithm to detect roundabout environments for mobile robot based on laser range finder and camera. In: International Conference on Mechanical and Manufacturing Engineering (ICME2013) December 17- 19, 2013 Putrajaya, Malaysia, 2013.

Mailah , Musa (2013) A method to compute the dimension of an air distribution channel of a pneumatic cylinder. In: 4th International Graduate Conference on Engineering Science & Humanity, IGCESH 2013, Johor Bahru, April 16-17, 2013, 2013.

Mailah , Musa (2013) A novel approach for visibility search graph based path planning. In: 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13) April 2-4, 2013,Kuala Lumpur, 2013.

Mailah , Musa (2013) Modelling of MR damper with adaptive neural network and particle swarm optimisation technique. In: 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13), April 2-4, 2013, 2013, Kuala Lumpur, Malaysia.

Mailah , Musa (2013) Hardware-in-the-loop simulation for active force control with iterative learning applied to an active vehicle suspension system. In: International Conference on Mechanical and Manufacturing Engineering (ICME2013), Putrajaya,17-19 December 2013 .

Mailah , Musa (2013) Simulation of MEMS capacitive thermal sensor based on tip deflection of a functionally graded micro-beam. In: 1st Internatonal Materials, Industrial, and Manufacturing Conference (MIMEC2013), 4 – 6 December 2013, 2013, Johor Bahru, Malaysia.

Mailah , Musa (2013) Autonomous mobile robot platform for on-the-road navigation. In: 1st Internatonal Materials, Industrial, and Manufacturing Conference (MIMEC2013).

Maimun, Adi Assesment of bank effect in restricted water using computational fluid dynamics. In: UNSPECIFIED.

Maimun, Adi (2005) Manoeuvring of pusher-barge in deep and shallow water. In: The Report of 10th Seminar and Joint Meeting of JSPS-DGHE Core University Program on Marine Transportation Engineering, 2005, Tidak Berkaitan.

Maimun, Adi (2012) Optimize the configuration of the compound wing in ground effect. In: International Conference on Marine Technology, 2012.

Maimun, Adi and Priyanto, Agoes and Rahimuddin, Rahimuddin and Baidowi, Ahmad and Nurcholi, Nurcholi (2009) Manoeuvring of a vessel in shallow water with ship-bank interaction effect. In: International Conference in Ocean Engineering (ICOE 2009), 2009, International Conference in Ocean Engeering, ICOE 2009 IIT Madras, Chennai, India.

Maimun, Adi and Roslan, Kamsani (2007) Development of Malaysia maritime database. In: World Maritime Day, 2007, Kuala Lumpur.

Maimun, Adi and Setyawan, Dony and Tan , Chun Chai (2003) Time domain simulation of damage stability assessment for Sarawak long boat using matlab. In: Marine Technology, 2003, UTM, Skudai.

Maimun, Adi and Yaakob, Omar and Kamal, Md. Ahm and Ng, Chee Wei (2006) Evaluation of seakeeping analysis of a fishing vessel using a wave buoy and onboard motions monitoring device. In: Proceedings the 1st International Conference on Natural Resources Engineering and Technology INRET2006, 24-25 July 2006, Marriot, Putrajaya, Malaysia. (Unpublished)

Mamat, M. F. (2013) Corrosion behaviour of low carbon steel welded joint in NaCl solution. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013).

Mamat, Rizalman and Mohd. Ja'afar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2001) Pengaruh kaedah penyediaan fabrikasi/propelan ke atas kadar pembakaran. In: Proceding of National Seminar on Advance Material Development in Malayia, 2001.

Manshoor, Bukhari and Wan Hassan, Mat Nawi and Alias, Norma (2006) A finite difference technique for solving incompressible fluid flow and energy equations on distributed parallel computer system. In: Proceeding of Malaysian Technical Universities Conference on Engineering and Technology 2006, MUCET 2006, 19th - 20th December 2006, Kolej Universiti Teknologi Tun Hussein Onn, Johor.

Mansor, Shuhaimi (2013) Modelling of equivalent stiffness of thin walled structural joints. In: ICMAAE'13, 2013.

Masood, Ibrahim and Hassan, Adnan (2009) Synergistic-ANN recognizers for monitoring and diagnosis of multivariate process shift patterns. In: International Conference of Soft Computing and Pattern Recognition, 2009. SOCPAR '09, 2009, Melaka.

Masrom, Maslin (2012) A framework for ethical use of information and communication technology at Malaysian primary schools. In: Proceeding of Technology, Science, Social Sciences and Humanities International Conference 2012, 2012.

Mat, M. Shabudin (2005) Aerodynamic study of a generic high wing transport aircraft. In: CEIAT Int. Conf. on Innovation and Integration in Aerospace Science, 2005, Belfast.

Mat, Ramli (2013) Microwave assisted pyrolysis of oil palm shell with coconut activated carbon. In: 1st International Materials, Industrial and Manufacturing Engineering Conference, 2013.

Mat Darus, Intan Zaurah and Tokhi, M. O. (2003) Direct neuro-AVC modelling and control strategy for vibration suppression of a flexible plate structure. In: The 9th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA2003, 16 - 19 September, Lisbon, Portugal.

Mat Darus, I. Z. and Tokhi, M. O. (2007) Genetic algorithm active vibration control of a flexible plate structures. In: International Society for the Systems Sciences, 2007, United Kingdom.

Mat Darus, Intan Zaurah (2012) Identification and control of a piezoelectric patch actuator. In: 1st International Conference on Systems, Control, Power, Robotics (SCOPORO '12), 2012.

Mat Darus, Intan Zaurah and Al-Khafaji, A. A. M. and Jamid, M. F. (2010) Neuro modelling of flexible plate structure rig for development of active vibration control algorithm. In: Asia Modeling Symposium 2010 : 4th Asia International Conferende on Mathematical Modelling & Computer Simulation, 26-28 May 2010, Borneo Island, Kota Kinabalu, Sabah.

Mat Darus, Intan Zaurah and Jamid, M. F. (2010) Development of a flexible plate structure rig for implementation of active vibration control algorithm. In: Proc. Of the asia Modelling Symposium 2010, (AMS2010), 26-28 May 2010, Kota Kinabalu, Sabah.

Mat Darus, Intan Zaurah and Jamid, M. F. and Tavakolpour, A. R. (2010) Vibration analysis of rectangular flexible thin plate. In: The 3rd International Conference on Intelligent and Advanced Systems (ICLAS 2010), 15-17 jun 2010, KLCC, Kuala Lumpur.

Mat Darus, Intan Zaurah and Mohamad, Maziah (2012) Intelligent parametric identification and dynamic characterisation of flexible manipulator system. In: IEEE Conference on Control, Systems & Industrial Informatics, 23 - 26 September 2012, Bandung, Indonesia.

Mat Darus, Intan Zaurah and Mohd. Hashim, Siti Zaiton and Mohamed, Maziah and Tokhi, Osman (2007) Interactive learning framework for dynamic modeling and control of a flexible beam structure. In: 2nd Regional Conference on Engineering Education , 2007, Johor Bahru.

Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Optimal location of sensor for active vibration control of flexible square plate. In: Proc. Of the 10th International Conference on Information Sciences, Signal Processing and their Applications (ISSPA2010), 10-13 May 2010, Kuala Lumpur, Malaysia.

Mat Darus , Intan Zaurah (2013) Development of MATLAB GUI application for System Identification (SID) of beam structure. In: WSEAS 13th International Conference on Robotics, Control & Manufacturing Technology; Latest Trends in Circuits, Control and Signal Processing.

Mat Lazim, Tholudin (2005) CFD simulation and wind tunnel tests on a monorai bridge section. In: 4th Int. Conf. on Heat Transfer, Fluid Mechanics and Thermodynamics, 2005, Johor Bahru.

Mat Lazim, Tholudin and Huong, Yu Saint, and Mat, Shabudin (2003) Computational Fluid Dynamic (CFD) to determine the aerodynamic interference of subsonic fighter aircraft. In: National Symposium On Science & Technology, 2003, Palace of the golden Horses, The Mines Resort City. Selangor.

Mat Lazim , Tholudin (2013) Evaluation of aerodynamic derivatives of MK82 bomb from wind tunnel testing and semi-empirical methods. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) .

Mat Rebi Abdul Rani, (2013) Assessment of musculoskeletal discomfort and psychosocial work factors among Malaysian bus drivers. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Mat Rejab, Mohd. Rozainee and Alias, Amran and Saed Ismail, Yob (2003) The effect of compaction of polymeric structural foam. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Mat Rejab, Mohd. Ruzaimi (2005) Low velocity impact behaviour of dise-door impact beam filled with pur foam. In: Seminar Kerjaya, 2005, FKM.

Mat Rejab, Mohd. Ruzaimi (2005) Testing and evaluation of polymeric foams. In: National Seminar On Computational & Experimental Mechanics, 2005, na.

Mat Saman, Muhamad Zameri and Zakuan, Norhayati (2006) End-of-Life Vehicle Directive: A Key Element to the Vehicle Design Process. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mat Saman, M. Z. and Noordin, M. Y. and Nabi Baksh, M. S. (2007) UTM's experience in industrial engineering education. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Mat Saman, M. Z. and Ong, M. M. (2007) An integration of measurement system analysis and process capability analysis in improving quality at glass manufacturing company. In: International Engineering Convention (IntEC 07), 2007, Serdang.

Mat Saman, M. Z. and Wei, K. L. (2007) Integration of quality tool and environmental requirements in evaluating a green design concept. In: The 5th International Conference on Quality and Reliability, 2007, Chaing Mai,Thailand.

Mat Saman, Muhamad Zameri (2013) Assessing sustainability performance of polymer processing: case study of hollow fiber membrane. In: 1st International Manufacturing Engineering Conference, 1st - 3rd July 2013, 2013, Kuantan, Pahang, Malaysia.

Mat Saman, Muhamad Zameri (2012) A conceptual framework for ERP systems implementation in SMEs. In: 5Th International Colloquium on Business And Management, 2012.

Mat Saman, Muhamad Zameri (2012) A framework for estimating the sustainability index of new product based on AHP and BP neural network. In: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management, 2012.

Mat Saman, Muhamad Zameri (2013) The need of end-of-life vehicles management system in Malaysia. In: 1st International Material, Industrial and Manufacturing Engineering Conference (MIMEC2013), 4 – 6 December 2013, 2013, Johor Bahru, Malaysia.

Mat Saman, Muhamad Zameri (2013) ProSET: a decision tool for product configuration designs based on sustainability performance evaluation. In: 1st International Manufacturing Engineering Conference, 1st - 3rd July 2013, 2013, Kuantan, Pahang, Malaysia.

Mat Saman, Muhamad Zameri and Aleem Ullah, Muhamad Zameri and Muhamad Zameri Mat Saman, Muhamad Zameri and Salwa Mahmood, Muhamad Zameri (2013) Development of multi-criteria decision analysis methodology to determine product end-of-life treatment options. In: 1st International Material, Industrial and Manufacturing Engineering Conference (MIMEC2013), 4 – 6 December 2013, Johor Bahru, Malaysia, December 2013, Johor Bahru.

Mat Saman, Muhamad Zameri and Blount, G. N. (2007) The DFEL value : a tool for sustainable environment. In: 1st International Conference on Sustainable Materials (ICOSM2007), June 2007, UNIMAP, Malaysia.

Mat Saman, Muhamad Zameri and Jiran, Nur Syamimi and Mahmood, Salwa and M.Y., Noordin (2013) Review on methodology for life cycle costing of membrane system for wastewater filtration. In: 1st International Material, Industrial and Manufacturing Engineering Conference (MIMEC2013), 4 – 6 December 2013, 2013, Johor Bahru, Malaysia.

Mat Saman, Muhamad Zameri and Sharif, Safian (2012) Evaluation of sustainability performance of product design element concepts using analytic hierarchy process. In: The 3rd International Conf. on Mechanical and Manufact