Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 3880.

Article

Salleh, S. M. and Ali, M. S. M. and Shaikh, S. A. Z. and Ishak, I. A. and Shirakashi, M. and Muhammad, S. (2017) Aerodynamics characteristics around simplified high speed train model under the effect of crosswinds. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2604-2609. ISSN 1819-6608

Syed Jaapar, S. Z. and Morad, N. A. and Iwai, Y. and Nordin, M. F. M. (2017) Effects of processing parameters in the sonic assisted water extraction (SAWE) of 6-gingerol. Ultrasonics Sonochemistry, 38 . pp. 62-74. ISSN 1350-4177

Muhalim, Nur Amanina Damira and Hassan, Mohamad Zaki and Md. Daud, Mohd Yusof (2017) Studies on the quasi-static and ultrasonic compression of copper tube filled with polyvinyl chloride (PVC) foam. Journal of Advanced Research in Applied Mechanics, 32 (1). pp. 1-8. ISSN 2289-7895

Tijani, H. and Abdullah, N. and Sallis, P. (2017) Impact of (RS)-MCPP herbicide and sulphate on the treatment performance, kinetics and microbial diversity of anaerobic membrane bioreactor. Journal of Environmental Chemical Engineering, 5 (6). pp. 5389-5395. ISSN 2213-3437

Mohebbi, R. and Lakzayi, H. and Sidik, N. A. C. and Japar, W. M. A. A. (2018) Lattice Boltzmann method based study of the heat transfer augmentation associated with Cu/water nanofluid in a channel with surface mounted blocks. International Journal of Heat and Mass Transfer, 117 . pp. 425-435. ISSN 0017-9310

Tijani, Hamzat and Yuzir, Ali and Abdullah, Norhayati (2018) Producing desulfurized biogas using two-stage domesticated shear-loop anaerobic contact stabilization system. Waste Management, 78 . pp. 770-780. ISSN 0956-053X

Hamsani, Muhammad Nurheilmi and Walmsley, Timothy Gordon and Liew, Peng Yen and Wan Alwi, Sharifah Rafidah (2018) Combined Pinch and exergy numerical analysis for low temperature heat exchanger network. Energy, 153 . pp. 100-112. ISSN 0360-5442

Abd. Rahman, Nurul H. and Yamada, Y. and Amin Nordin, M. S. (2018) Reliability of strip line method for determination of conductivity for lossy conductive materials. IEEE Access, 6 (850204). pp. 64630-64638. ISSN 2169-3536

Shahemi, N. and Liza, S. and Abbas, A. A. and Merican, A. M. (2018) Long-term wear failure analysis of UHMWPE acetabular cup in total hip replacement. Journal of the Mechanical Behavior of Biomedical Materials, 87 . pp. 1-9. ISSN 1751-6161

Tijani, Hamzat and Abdullah, Norhayati and Yuzir, Ali (2018) Enhancing methane production of palm oil mill effluent using two-stage domesticated shear-loop anaerobic contact stabilization system. Journal of Cleaner Production, 200 . pp. 971-981. ISSN 0959-6526

Mohd. Sakri, Fadhilah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Azizan, Mohd. Amzar (2018) Numerical study on air-core vortex inside draining tank using different computational modelling approaches. Jurnal Teknologi, 8 (1). pp. 101-109. ISSN 2180-3722

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Kermanshahi, Emad Kasra (2018) Balancing of life cycle carbon and cost appraisal on alternative wall and roof design verification for residential building. Construction Innovation-England, 18 (3). pp. 274-300. ISSN 1471-4175

Al-Qaim, Fouad Fadhil and Haider Mussa, Zainab and Yuzir, Ali (2018) Development and validation of a comprehensive solid-phase extraction method followed by LC-TOF/MS for the analysis of eighteen pharmaceuticals in influent and effluent of sewage treatment plants. Analytical and Bioanalytical Chemistry, 410 (20). pp. 4829-4846. ISSN 1618-2642

Centeno, Anthony and Aid, Siti Rahmah and Xie, Fang (2018) Infra-Red Plasmonic Sensors. Chemosensors, 6 (1). p. 4. ISSN 2227-9040

Basri, Hazlami Fikri and Anuar, Aznah Nor and Ab. Halim, Mohd. Hakim (2020) Pilot scale study on characterization and performance of aerobic granular sludget o treat domestic wastewater. Malaysian Journalof Fundamental and Applied Sciences, 16 (1). pp. 38-43. ISSN 2289-5981

Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Ismail, Mohamad Hafiz and Zaki, Sheikh Ahmad (2018) Flow-induced vibration of a square cylinder and downstream flat plate associated with micro-scale energy harvester. Journal of Wind Engineering and Industrial Aerodynamics, 175 . pp. 264-282. ISSN 0167-6105

Abdullah, Mohd. Faizol and Hashim, Abdul Manaf (2018) Design of optimum rear passivated submicron Al corrugation in very thin textured silicon back-contact back-junction solar cell for absorption enhancement up to near-infrared region. Journal of Photonics for Energy, 8 (1). 0145011-0145011. ISSN 1947-7988

Isa, N. M. and Irawati, N. and Harun, S. W. and Ahmad, F. and Rahman, H. A. and Yusoff, M. H. M. (2018) Multi-walled carbon nanotubes doped Poly(Methyl MethAcrylate) microfiber for relative humidity sensing. Sensors and Actuators, A: Physical, 272 . pp. 274-280. ISSN 0924-4247

Belhadi, Amine and Mohd. Sha’ri, Yusof and Touriki, Fatima Ezahra and El Fezazi, Said (2018) Lean production in SMEs: literature review and reflection on future challenges. Journal of Industrial and Production Engineering, 35 (6). pp. 368-382. ISSN 2168-1015

Swarno, H. A. and Zaki, S. A. and Zaki, A. and Yusup, Y. (2020) Characteristics of wind speed during rainfall event in the tropical urban city. Urban Climate, 32 . ISSN 2212-0955

Shakeri, Leili and Baqutayan, Shadiya Mohamed S. (2020) Does organizational culture supports knowledge creation? An overview. Journal Of Science, Technology And Innovation Policy, 6 (1). pp. 1-6. ISSN 2550-2018

Surib, N. A. and Mohd. Paad, K. (2020) Electrospray flow rate influenced the sized of functionalized soot nanoparticles. Asia-Pacific Journal of Chemical Engineering, 15 (3). ISSN 1932-2135

Hassan, Mohamad Zaki and Sapuan, S. M. and Roslan, S. A. and Aziz, S. A. and Sarip, S.Sarip (2019) Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology. Journal of Materials Research and Technology, 8 (4). pp. 3517-3528. ISSN 2238-7854

Yamada, J. and Shibuya, T. and Kobayashi, A. and Tsuji, T. (2020) Mercury solubility measurements in natural gas components at high pressure. Fluid Phase Equilibria, 506 . ISSN 0378-3812

Maeda, K. and Hong, C. and Asako, Y. (2019) Flow characteristics of transition region between laminar and turbulent gas flows through micro-tubes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (1). pp. 10-19. ISSN 2289-7879

Fujita, Masaya and Mori, Kosuke and Hara, Hirofumi and Hishiyama, Shojiro and Kamimura, Naofumi and Masai, Eiji (2019) A TonB-dependent receptor constitutes the outer membrane transport system for a lignin-derived aromatic compound. Communications Biology, 2 (1). p. 432. ISSN 2399-3642

Yosri, M. H. and Muhamad, P. and Mohd. Yatim, N. H. (2019) Evaluation of air flow pattern for conceptual design of automotive painting line using computational fluid dynamic (cfd) for better dust particle reduction. CFD Letters, 11 (2). pp. 42-49. ISSN 2180-1363

Zakeri, Masoumeh and Abouzari-Lotf, Ebrahim and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Miyake, Mikio and Ting, Teo Ming and Sithambaranathan, Paveswari (2019) Fabrication and characterization of supported dual acidic ionic liquids for polymer electrolyte membrane fuel cell applications. Arabian Journal of Chemistry, 12 (7). pp. 1011-1023. ISSN 1878-5352

Othman, Fatin Syahirah and Jamaluddin, Haryati and Ibrahim, Zaharah and Hirofumi, Hara and Yahya, Nurul Ashyikin and Koji, Iwamoto and Mohamad, Shaza Eva (2019) Production of α-linolenic acid by an oleaginous green algae acutodesmus obliquus isolated from Malaysia. Journal of Pure and Applied Microbiology, 13 (3). pp. 1297-1306. ISSN 0973-7510

Mohd. Hapipi, Norhiwani and Mazlan, Saiful Amri and Ubaidillah, U. and Homma, Koji and Abdul Aziz, Siti Aishah and Nordin, Nur Azmah and Bahiuddin, Irfan and Nazmi, Nurhazimah (2020) The rheological studies on poly(vinyl) alcohol-based hydrogel magnetorheological plastomer. Polymers, 12 (10). pp. 1-15. ISSN 2073-4360

Lokman, Nur Aleya and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Yuzir, Muhammad Ali (2021) A brief review on biochemical oxygen demand (BOD) treatment methods for palm oil mill effluents (POME). Environmental Technology and Innovation, 21 . p. 101258. ISSN 2352-1864

Hettiarachchi, Gayan Prasad and Yoshifumi, Nishida and Yusuke, Masaki and Mohd. Muhid, Mohd. Nazlan and Hamdan, Halimaton (2020) Optical investigations of the (dis)continuous metal–insulator transitions in strongly-coupled electron-lattice systems. Journal of Physics Condensed Matter, 32 (9). 095601-095601. ISSN 0953-8984

Mehmood, Ahsan and Mubarak, N. M. and Khalid, Mohammad and Jagadish, Priyanka and Walvekar, Rashmi and Abdullah, E. C. (2020) Graphene/PVA buckypaper for strain sensing application. Scientific Reports, 10 (1). p. 20106. ISSN 2045-2322

Jamalus, M. S. K. and Yusoff, N. M. and Sulaiman, A. H. (2019) Simulation of dual stage thulium-doped fiber amplifier using pump power distribution technique. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1203-1211. ISSN 2502-4752

Harun, Muhammad Arif and Gunnasegaran, Prem and Che Sidik, Nor Azwadi and Beriache, M’hamed and Ghaderian, Javad (2021) Experimental investigation and optimization of loop heat pipe performance with nanofluids. Journal of Thermal Analysis and Calorimetry, 144 (4). pp. 1435-1449. ISSN 1388-6150

Mohamad, Syazwani and Shahira Liza, Shahira Liza and Yaakob, Yazid (2020) Strengthening of the mechanical and tribological properties of composite oxide film formed on aluminum alloy with the addition of graphite. Surface and Coatings Technology, 403 . p. 126435. ISSN 0257-8972

Mohd. Nizam, Nurul Najwa and Kamardin, Kamilia and Yamada, Yoshihide and Idris, Izni Husna and Abd. Rahman, Nurul Huda and Mad Kaidi, Hazilah (2020) Fabrication of human body phantom for body centric communication systems at 2.4 GHz. International Journal of Integrated Engineering, 12 (6). pp. 20-26. ISSN 2229-838X

Yosri, M. H. and Muhamad, P. and Quen, L. K. and Yatim, N. M. (2020) Analysis of air flow around the painting line for dust reduction: an experimental and numerical study. CFD Letters, 12 (9). ISSN 21801363

Ismail, Mohd. Afiq and Abdul Razak, Mohd. Zulhakimi and Harun, Sulaiman Wadi and Hashim, Abdul Manaf (2021) Reduction‐controlled graphene oxide saturable absorbers and its effect on ultrashort Er‐doped fibre laser. IET Optoelectronics, 15 (1). pp. 61-68. ISSN 1751-8768

Alsabery, Ammar I. and Che Sidik, Nor Azwadi and Hashim, Ishak and Muhammad, Nura Muaz (2022) Impacts of two-phase nanofluid approach toward forced convection heat transfer within a 3D wavy horizontal channel. Chinese Journal of Physics, 77 (NA). pp. 350-365. ISSN 0577-9073

Haris, N. I. N. and Hassan, M. Z. and Ilyas, R. A. (2022) Crystallinity, chemical, thermal, and dynamic mechanical properties of rice husk/coco peat fiber reinforced ABS biocomposites. Journal of Natural Fibers, 19 (16). pp. 13753-13764. ISSN 1544-0478

Abdul Majid, Roshida and Abba, Habu Yusuf and Ahmad, Mohd. Hamdan and Ayegbusi, Olutobi Gbenga (2022) Validation of design builder simulation accuracy using field measured data of indoor air temperature in a classroom building. Journal Of Tourism, Hospitality And Environment Management, 7 (27). pp. 171-178. ISSN 0128-178X

Haron, Habibollah and Iis Afrianty, Iis Afrianty and Dewi Nasien, Dewi Nasien (2022) Performance analysis of support vector machine in sex classification of the sacrum bone in forensic anthropology. Jurnal Teknik Informatika, 15 (1). pp. 63-72. ISSN 2723-3863

Zhou, Liang and Kamyab, Hesam and Surendar, Aravindhan and Maseleno, Andino and Ibatova, Aygul Z. and Chelliapan, Shreeshivadasan and Karachi, Nima and Parsaee, Zohreh (2019) Novel Z-scheme composite Ag2CrO4/NG/polyimide as high performance nano catalyst for photoreduction of CO2: design, fabrication, characterization and mechanism. Journal of Photochemistry and Photobiology A: Chemistry, 368 . pp. 30-40. ISSN 1010-6030

Elsupikhe, Randa Fawzi and Shameli, Kamyar and Ahmad, Mansor B. and Ibrahim, Nor Azowa and Zainudin, Norhazlin (2015) Green sonochemical synthesis of silver nanoparticles at varying concentrations of kappa-carrageenan. Nanoscale Research Letters, 10 (1). pp. 1-8. ISSN 1931-7573

Saidu, Ahmed Y. and Wagiran, Husin and Saeed, Mohammad Alam and Alajerami, Yasser Saleh Mustafa (2015) Thermoluminescence characteristics of zinc lithium borate glass activated with Cu+ (ZnO-Li2O-B2O3:Cu+) for radiation dosimetry. Journal Of Radioanalytical And Nuclear Chemistry, 304 (2). pp. 627-632. ISSN 2365-731

A. H., Syafrina and A., Norzaida and O., Noor Shazwani (2018) Stochastic generation of hourly rainfall series in the Western Region of Peninsular Malaysis. International Journal of Advanced and Applied Sciences, 5 (1). pp. 101-108. ISSN 2313-626X

A. Jalani, Jihan and Kidam, Kamarizan and Shahlan, Siti Suhaili and Kamarden, Hamidah and Hassan, Onn and Hashim, Haslenda (2015) An analysis of major accident in the US chemical safety board (CSB) database. Jurnal Teknologi, 75 (6). pp. 53-60. ISSN 2180–3722

A. Jalil @ Zainuddin, Siti Zura and Mohamad Hairani, Izwan Hamidi and Md. Yusoff, Nelidya (2018) Reduce musculoskeletal disorders injury during manual handling in tooling parts manufacturing industry. Journal of Advanced Research in Occupational Safety and Health, 1 (1). pp. 1-10. ISSN 2637-0255

A. Kadir, Zuritah and Mohammad, Roslina and Othman, Norazli (2020) An advanced risk matrix analysis approach for safety evaluation at major ports in Malaysia. Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 31-41. ISSN 2462-1935

A. Majid, Huda and A. Rahim, Mohamad Kamal and Masri, Thelaha (2009) Microstrip antenna's gain enhancement using left-handed matematerial structure. Progress in Electromagnetics Research M, 8 . pp. 235-247. ISSN 1937-8726

A. Malek, Nur Shuhada and Zayid, Syamil and Ahmad, Zaifulasraf and Ya'acob, Suraya and Abu Bakar, Azaliah (2020) Data understanding for flash flood prediction in urban areas. Journal of Environmental Treatment Techniques, 8 (2). pp. 770-778. ISSN 2309-1185

A. Manan, Muhammad and Abd. Razak, Abd. Razif and Sulai, Abdul Thani (1993) Bahan baki berlilin sulfur rendah (LSWR) minyak Tapis Blend di Loji Penapisan Kerteh. Buletin FKKKSA, 7(2) . pp. 12-18. ISSN 0128-0740

A. Rahman, Mohd. Asamudin and Wan Hussin, Wan Norazam and Mohd., Mohd. Hairil and Harun, Fatimah Noor and Lee, Kee Quen and Jeom, Kee Paik (2019) Modified wake oscillator model for vortex-induced motion prediction of low aspect ratio structures. Ships and Offshore Structures, 14 (sup1). pp. 335-343. ISSN 1744-5302

A. Rosli, Nur Fathin and Ibrahim, Roslina and Yahya, Yazriwati and M. Zainuddin, Norziha M. and Yaacob, Suraya and M. Yusoff, Rasimah C. (2020) Consumers intention to use mobile payment: a case of quick response (QR) code applications. Mathematical Sciences and Informatics Journal, 1 (1). pp. 20-34. ISSN 2735-0703

Ab. Ghani, Hadhrami and Abd. Aziz, Azlan and Azizan, Azizul and Mohd. Daud, Salwani (2018) Adaptive interference mitigation with user grouping for fast transmission in cellular networks. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 704-712. ISSN 2502-4752

Ab. Ghani, Hadhrami and Roslim, Farah Najwa and Remli, Muhammad Akmal and Al-Shari, Eissa Mohammed Mohsen and Md. Saleh, Nurul Izrin and Azizan, Azizul (2021) 5G NOMA user grouping using discrete particle swarm optimization approach. Telkomnika (Telecommunication Computing Electronics and Control), 19 (6). pp. 1803-1810. ISSN 1693-6930

Ab. Hamid, Salbiah and Abd. Rahman, Nurul Huda and Yamada, Yoshihide and Hung, Phan Van and Quoc, Dinh Nguyen (2020) Multibeam characteristics of a negative refractive index shaped lens. Sensors (Switzerland), 20 (19). pp. 1-17. ISSN 1424-8220

Ab. Latif, Farah Ezzah and Numan, Arshid and Mubarak, Nabisab Mujawar and Mohammad Khalid, Mohammad Khalid and Abdullah, Ezzat Chan and Abdul Manaf, Norhuda and Walvekar, Rashmi (2022) Evolution of MXene and its 2D heterostructure in electrochemical sensor applications. Coordination Chemistry Reviews, 471 (NA). pp. 1-38. ISSN 0010-8545

Ab. Rani, N. I. and Ismail, S. and Mohamed, Z. and Hussain, A. H. and Ghafourian, K. (2018) Local contractors' awareness on competitiveness towards liberalisation and globalisation in the Malaysian construction industry. Journal of Construction in Developing Countries, 23 (1). pp. 21-42. ISSN 1823-6499

Ab. Rashid, M. Z. and Mohd. Yakub, M. F. and Zaki, S. A. and Mamat, N. and Syed Mohd. Putra, S. M. and Roslan, S. A. (2020) Modeling of the in-pipe inspection robot: a comprehensive review. Ocean Engineering, 203 . ISSN 0029-8018

Ab. Talib, Mohamed Syazwan and Abdul Hamid, Abu Bakar and Zulfakar, Mohd. Hafiz (2015) Halal supply chain critical success factors: a literature review. Journal of Islamic Marketing, 6 (1). pp. 44-71. ISSN 1759-0833

Abadi, Satria and Huda, Miftachul and Mat Teh, Kamarul Shukri and Haron, Zulkiflee and Ripin, Mohd. Nasir and Hehsan, Aminudin and Sarip, Shamsul and Hehsan, Muhamad Rafiqi and Amrullah, Musfika and Maseleno, Andino (2018) Hazard level of vehicle smoke by fuzzy multiple attribute decision making with simple additive weighting method. International Journal of Pharmaceutical Research, 10 (4). pp. 58-67. ISSN 0975-2366

Abaei, Golnoush and Selamat, Ali (2015) Increasing the accuracy of software fault prediction using majority ranking fuzzy clustering. Studies in Computational Intelligence, 569 . pp. 179-193. ISSN 1860-949X

Abaei, Golnoush and Selamat, Ali and Fujita, Hamido (2015) An empirical study based on semi-supervised hybrid self-organizing map for software fault prediction. Knowledge-Based Systems, 74 . pp. 28-39. ISSN 9506-764

Abas, Hafiza and Azizan, Azizul and Mohd. Daud, Salwani and Salih Yagoub, Fathi Ibrahim (2018) Enhancement of physical security control for data centre and perimeter in banking: a case study of central bank of Sudan (CBOS). Open International Journal of Informatics (OIJI), 6 (3). pp. 67-84. ISSN 2289-2370

Abas, Hafiza and Zakaria, Huraizah and Yahya, Faridah Hanim and Lob Yussof, Rahmah and Ramli, Roslinda (2018) A systematic literature review of security perimeter in hospital facility. Open International Journal of Informatics (OIJI), 6 (4). pp. 104-129. ISSN 2289-2370

Abas, M. A. and Wan Salim, W. S. and Ismail, M. I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abbas, Malik R. and Ahmad, Baharin and Abbas, Talib Rashid (2015) Use MODIS satellite data to study new phenomena of underground fire in the Al Ruhban oasis in Al Najaf city, Iraq. Environmental Earth Sciences, 73 (7). pp. 3475-3485. ISSN 1866-6280

Abbas Shah, Syed Nadeem and Shahabuddin, Syed and Mohd. Sabri, Mohd. Faizul and Mohd. Salleh, Mohd. Faiz and Ali, Mohamad Azlin and Hayat, Nasir and Che Sidik, Nor Azwadi and Samykano, Mahendran and Saidur, R. (2020) Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids. International Journal of Heat and Mass Transfer, 150 . p. 118981. ISSN 0017-9310

Abbasi, A. and Nasef, M. M. and Yahya, W. Z. N. and Moniruzzaman, M. and Ghumman, A. S. M. (2021) Preparation and characterization of sulfur-vinylbenzyl chloride polymer under optimized reaction conditions using inverse vulcanization. European Polymer Journal, 183 . ISSN 0014-3057

Abbasi, F. and Mehdipour-Ataei, S. and Tabatabaei-Yazdi, Z. and Babanzadeh, S. and Abouzari-Lotf, E. (2017) Effect of sepiolite nanoparticles on the properties of novel poly(sulfone ether imide). Polymers for Advanced Technologies, 28 (3). pp. 404-410. ISSN 1042-7147

Abd Rahman, Mohd Norani (1989) Sumber ekonomi daripada sampah. Buletin FKKKSA, 3 (2). pp. 55-59. ISSN 0128-0740

Abd Rahman, Muhammad Zulkarnain and Dinand, Alkema (2007) Digital Surface Model (DSM) Construction and Flood Hazard Simulation for Development Plans in Naga City, Philippines. GIS development .

Abd. Wahid, M. A. and Megat Mohd. Noor, M. J. and Goto, M. and Sugiura, N. and Othman, N. and Zakaria, Z. and Ahmad Mohammed, T. and Jusoh, A. and Hara, H. (2017) Recombinant protein expression of Moringa oleifera lectin in methylotrophic yeast as active coagulant for sustainable high turbid water treatment. Bioscience, Biotechnology and Biochemistry, 81 (8). pp. 1642-1649. ISSN 0916-8451

Abd Wahid, Latiffah (2004) Tahap Pemahaman Individu Terhadap Sistem Taksir Sendiri Dan Implikasinya Terhadap Individu Dan Organisasi. (Unpublished)

Abd. Aziz, Mustafa Kamal and Abu Hasan, Arshad and Khalid, Yahya and Tahir, Jamil and Sani, Harun and Jaafar, Rusli and Abu Hasan, Adilah and Mohd Yassin, Abu Azam (1993) Design and scale up of vacuum distillation process for the acidification of crude palm oil. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-1.

Abd. Aziz, Mustafa Kamal and Abu Hasan, Arshad and Khalid, Yahya and Tahir, Jamil and Sani, Harun and Jaafar, Rusli and Abu Hasan, Adilah and Mohd Yassin, Abu Azam and Mat Yusop, Mohd Izani (1993) Ketegangan permukaan campuran minyak kelapa sawit (RBDL) dan asid lemak bebas (FFA). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 3-5.

Abd. Aziz, Nur Syazarin Natasha and Mohd. Daud, Salwani and Dziyauddin, Rudzidatul Akmam and Adam, Mohamad Zulkefli and Azizan, Azizul (2020) A review on computer vision technology for monitoring poultry farm-application, hardware, and software. IEEE Access, 9 . pp. 12431-12445. ISSN 21693536

Abd. Aziz, Nur Syazarin Natasha and Mohd. Daud, Salwani and Dziyauddin, Rudzidatul Akmam and Adam, Mohamad Zulkefli and Azizan, Azizul (2021) A review on computer vision technology for monitoring poultry farm—application, hardware, and software. IEEE Access, 9 . pp. 12431-12445. ISSN 2169-3536

Abd. Fatah, A. Y. and Mazlan, S. A. and Koga, T. and Zamzuri, H. and Imaduddin, F. (2016) Design of magnetorheological valve using serpentine flux path method. International Journal of Applied Electromagnetics and Mechanics, 50 (1). pp. 29-44. ISSN 1383-5416

Abd. Halim, Ida Sharmiza and Shuib, Rambat and Mohd. Noh, Muhammad Ramzanee (2022) Site-suitability analysis on seismic stations using Geographic Information Systems. Disaster Advances, 15 (2). pp. 1-14. ISSN 0974-262X

Abd. Halim, Norhazliza and Abas, Siti Aisah and Mohd. Hanafiah, Mohd. Hafiz (2022) Exploring the role of local champion in community-based rural homestay in Malaysia: a case of homestay Sungai Dorani. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 310-320. ISSN 0128-178X

Abd. Hamid, Mohd. Azhar and Suratman, Azmi Shah and Othman, Muhamad Fauzi (2001) Senario Pendidikan Moral Masyarakat Melayu Zaman Teknologi Komunikasi Maklumat (ICT): Trend, Hala Tuju Dan Model Pendidikan Moral Keluarga Islam. Jurnal Teknologi E (35E). pp. 45-70. ISSN 0127-9696

Abd. Jamil, A. H. and Fathi, M. S. (2020) Enhancing bim-based information interoperability: disputes resolution from legal and contractual perspectives. Journal of Construction Engineering and Management, 146 (7).

Abd. Jamil, Ahmad Huzaimi and Fathi, Mohamad Syazli (2018) Contractual challenges for BIM-based construction projects: a systematic review. Built Environment Project and Asset Management, 8 (4). pp. 372-385. ISSN 2044-124X

Abd. Kadir, Zulkiffli and Hudha, Khisbullah and Zamzuri, Hairi and Mazlan, Saiful Amri and Murrad, Muhamad and Imaduddin, Fitrian (2016) Modeling, validation and firing-onthe- move control of armored vehicles using active front-wheel steering. Journal of Defense Modeling and Simulation, 13 (2). pp. 253-267. ISSN 1548-5129

Abd. Kadir, Zulkiffli and Zamzuri, Hairi and Hudha, Khisbullah and Mazlan, Saiful Amri and Amer, Noor Hafizah and Murrad, Muhamad (2016) Optimisation of yaw rejection control for armoured vehicle using Taguchi method. International Journal of Heavy Vehicle Systems, 23 (1). pp. 60-80. ISSN 1744-232X

Abd. Khalid, Saiful Nizam and Mustafa, Mohd. Wazir and Khairuddin, Azhar and Abdullah, Shahrum Shah (2009) Real power transfer allocation method with the application of radial basis function network. International Review of Automatic Control, 2 (3). pp. 300-308. ISSN 1974-6059

Abd. Latif, Fazilah (1992) Penghasilan hirudin dari lintah tempatan (hirudo medicinalis). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-7.

Abd. Rahim, N. and Mohamed, Z. and Amrin, A. and Masrom, M. (2021) Impact of self-regulated learning on entrepreneurial opportunity recognition and academic entrepreneurship performance. International Journal of Innovation and Technology Management, 18 (4). ISSN 0219-8770

Abd. Rahim, Noorlizawati and Mohamed, Zainai and Amrin, Astuty (2021) From lab to market: Challenges faced by academic entrepreneur in technology transfer pursuit. International Journal of Business and Society, 22 (3). pp. 1256-1268. ISSN 1511-6670

Abd. Rahim, Noorlizawati and Mohamed, Zainai and Tasir, Zaidatun and Shariff, Sya Azmeela (2022) Impact of experiential learning and case study immersion on the development of entrepreneurial self-efficacy and opportunity recognition among engineering students. Higher Education Pedagogies, 7 (1). pp. 130-145. ISSN 2375-2696

Abd. Rahim, Noorlizawati and Mohamed, Zainai B. and Amrin, Astuty (2015) Commercialization of emerging technology: The role of academic entrepreneur. 6th Indonesia International Conference on Innovation, Entrepreneurship, and Small Business (IICIES 2014), 169 . pp. 53-60. ISSN 1877-0428

Abd. Rahman, A. S. and Masrom, S. and Rahman, R. A. and Ibrahim, R. (2021) Rapid software framework for the implementation of machine learning classification models. International Journal of Emerging Technology and Advanced Engineering, 11 (8). ISSN 2250-2459

Abd. Rahman, Abdul Hadi and Zamzuri, Hairi and Mazlan, Saiful Amri and Abdul Rahman, Mohd. Azizi and Yamamoto, Yoshio and Samsuri, Saiful Bahri (2015) Dynamic track management in MHT for pedestrian tracking using laser range finder. Mathematical Problems In Engineering, 2015 . pp. 1-9. ISSN 1024-123X

Abd. Rahman, Faridah and Othman, Mohd. Fauzi and Shaharuddin, Nurul Aimi (2015) Analysis methods of EEG signals: A review in EEG application for brain disorder. Jurl Teknologi, 72 . pp. 67-72. ISSN 1279-696

Abd. Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Design and performance improvement of shaped-beam parabolic reflector antenna for small region coverage by non-symmetrical array feed technique. International Journal of Applied Electromagnetics and Mechanics, 51 (3). pp. 307-318. ISSN 1383-5416

Abd. Rahman, Nurul H. and Islam, Mohammad T. and Yamada, Yoshihide and Michishita, Naobumi (2015) Design of shaped-beam parabolic reflector antenna for Peninsular Malaysia beam coverage and its overlapping feed issues. Applied Computatiol Electromagnetics Society Jourl, 30 (9). pp. 952-958. ISSN 1054-4887

Abd. Rashid, Rusila Zamani and Johari, Norhasnidawani and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Nordin, Nur Azmah and Nazmi, Nurhazimah and Aqida, S. N. and Johari, Mohd. Aidy Faizal (2021) Effects of silica on mechanical and rheological properties of EPDM-based magnetorheological elastomers. Smart Materials and Structures, 30 (10). NA-NA. ISSN 0964-1726

Abd. Razak, Mohd. Razif (1987) Petroleum and natural gas engineering-What is it? Buletin FKKKSA, 1 (1). pp. 16-21. ISSN 0128-0740

Abd. Razak, Shukor and Samian, Normalia and Maarof, Mohd. Aizaini (2008) A friend mechanism for mobile ad hoc networks. Proceedings of the 4th International Symposium on Information Assurance and Security, IAS 2008 . pp. 243-248.

Abd. Razak, Azli and Mohd. Rodzi, Mohd. Azhari and Jumali, Amirul Hakim and Zaki, Sheikh Ahmad (2015) Analysis of pedestrian-level wind velocity in four neighbourhoods in Klang Valley. Jurnal Teknologi, 76 (5). pp. 25-29. ISSN 0127-9696

Abd. Razak, I. F. and Yahya, W. J. and Ithnin, A. M. and Rashid, M. and Zuber, M. A. and Abd. Kadir, H. and Samion, S. and Noge, H. (2021) Effects of different water percentages in non-surfactant water-in-diesel emulsion fuel on the performance and exhaust emissions of a small-scale industrial burner. Clean Technologies and Environmental Policy, 23 (8). ISSN 1618-954X

Abd. Samad, Suzana and Harun, Aizul Nahar and Mohd. Nawi, Mohd. Nasrun and Haron, Nuzul Azam (2018) The potential use of BIM through an electronic submission: A preliminary study. Malaysian Construction Research Journal, 3 (SI1). pp. 82-96. ISSN 1985-3807

Abd. Talib, Norfahana and Sing Chuong, Chuo and Mohd. Setapar, Siti Hamidah and Asli, Umi Asiah and Pa’ee, Khairul Faizal and Yong, Kelly Tau Len (2020) Trends in adsorption mechanisms of fruit peel adsorbents to remove wastewater pollutants (Cu (II), Cd (II) and Pb (II)). Journal of Water and Environment Technology, 18 (5). pp. 290-313. ISSN 1348-2165

Abdalla, Shiref A. and Abdullah, Shahrum S. and Kassem, Ahmed M. (2022) Performance enhancement and power management strategy of an autonomous hybrid fuel cell/wind power system based on adaptive neuro fuzzy inference system. Ain Shams Engineering Journal, 13 (4). pp. 1-17. ISSN 2090-4479

Abdelrhman, Ahmed M. and Leong, M. Salman and Hee, Lim Meng and Al-Obaidi, Salah M. Ali (2015) Segregation of close frequency components based on reassigned wavelet analysis for machinery fault diagnosis. Lecture Notes in Mechanical Engineering, 19 . pp. 581-590. ISSN 2195-4356

Abdol Rahim, Fatin Hamizah and Mohd. Noor, Norliza and Abdullah, Haslaile and Annanurov, Bayram (2020) Cost minimization of aircraft critical components for planning and maintenance requirements. International Journal of Integrated Engineering, 12 (7). pp. 40-53. ISSN 2229-838X

Abdul, Mohd Syukor and Mohd Sam, Suriani and Mohamed, Norliza and Kamardin, Kamilia and Dziyauddin, Rudzidatul Akmam (2019) Docker containers usage in the internet of things: a survey. Open International Journal of Informatics, 7 (2). pp. 208-220. ISSN 2289-2370

Abdul, R. H. and Kang, X. K. and Che, F. Y. and Lee, M. E. S. and Narayanan Aqilah Leela, T. (2016) Robotic assessment modules for upper limb stroke assessment: Preliminary study. Journal of Medical Imaging and Health Informatics, 6 (1). pp. 157-162. ISSN 2156-7018

Abdul Awal, A. S. M. and Hussin, M. W. (2009) Strength modulus of elasticity and shrinkage behaviour of POFA concrete. Malaysian Journal of Civil Engineering, 21 (2). pp. 125-134. ISSN 1823-7843

Abdul Aziz, Ramlan and Kamsah, Mohd Zaki and Ripin, Adnan and Ibrahim, Kamarul Asri (1992) UTM's chemical engineering pilot plant: a perspective. Prosiding Simposium Jurutera Kimia Malaysia Ke-8 .

Abdul Aziz, Ramlan and Sarmidi, Mohd Roji and Kumaresan, Sivakumar and Chwan, Dominic Yee Foo (2005) Engineering aspects of herbal and phytochemical processing: a Malaysian perspective. Jurutera . pp. 10-19.

Abdul Aziz, S. A. and Mazlan, S. A. and Nik Ismail, N. I. and Choi, S. B. and Ubaidillah, Ubaidillah and Yunus, N. A. B. (2017) An enhancement of mechanical and rheological properties of magnetorheological elastomer with multiwall carbon nanotube. Journal of Intelligent Material Systems and Structures, 28 (20). ISSN 3127-3138

Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Ubaidillah, U. and Mohamad, Norzilawati and Choi, Seung Bok and Che Aziz, Mohamad Amirul and Johari, Mohd. Aidy Faizal and Koji, Homma (2020) Thermal aging rheological behavior of magnetorheological elastomers based on silicone rubber. International Journal of Molecular Sciences, 21 (23). pp. 1-17. ISSN 1661-6596

Abdul Aziz, Siti Aishah and Ubaidillah, Ubaidillah and Mazlan, Saiful Amri and Nik Ismail, Nik Intan and Choi, Seung-Bok (2018) Implementation of functionalized multiwall carbon nanotubes on magnetorheological elastomer. Journal of Materials Science, 53 (14). pp. 10122-10134. ISSN 0022-2461

Abdul Aziz, Zarith Asyikin and Mohd. Nasir, Hasmida and Ahmad, Akil and Mohd. Setapar, Siti Hamidah and Wong, Lee Peng and Sing, Chuong Chuo and Khatoon, Asma and Umar, Khalid and Yaqoob, Asim Ali and Mohamad Ibrahim, Mohamad Nasir (2019) Role of nanotechnology for design and development of cosmeceutical: Application in makeup and skin care. Frontiers in Chemistry, 7 . p. 739. ISSN 2296-2646

Abdul Aziz, Badhrulhisham and Hassan, Onn and Othman, Mohd Rasid (1990) Teknologi osmosis balikan: teori dan penggunaannya. Buletin FKKKSA, 4 (1). pp. 25-28. ISSN 0128-0740

Abdul Aziz, Mustafa Kamal and Sulong, Mohamad and Morad, Noor Azian and Lee, Thian Teck and Ayob , Azam (1989) The influence of plate and packed column on the mass transfer of free fatty acids from palm oil mixtures. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 265-273.

Abdul Aziz, Mustafa Kamal and Sulong, Mohd. and Morad, Noor Azian and Ibrahim, Mohd. Radzi and Sharaai, Md. Jefri (1989) Process modelling and simulation of crude palm oil refining. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 422-431.

Abdul Aziz, Ramlan and Mahadi, Khairul Anuar (1988) Konsep mikropenurasan aliran silang (MAS) dan penggunaannya di industri. Buletin FKKKSA, 1 (2). pp. 19-26. ISSN 0128-0740

Abdul Bujang, S. D. and Selamat, A. and Ibrahim, R. and Krejcar, O. and Viedma, E. H. and Fujita, H. (2021) Multi-class prediction model for student grade prediction using machine learning. IEEE Access, 9 . 95608 -95621. ISSN 2169-3536

Abdul Bujang, Siti Dianah and Selamat, Ali and Ibrahim, Roliana and Krejcar, Ondrej and Herrera-Viedma, Enrique and Fujita, Hamido and Md. Ghani, Nor Azura (2021) Multiclass prediction model for student grade prediction using machine learning. IEEE Access, 9 (NA). pp. 95608-95621. ISSN 2169-3536

Abdul Halim, I. S. and Kobayashi, F. and Watanabe, M. and Mashiko, K. and Ooi, C. Y. (2017) Small Area Implementation for Optically Reconfigurable Gate Array VLSI: FFT Case. Journal of Scientific & Industrial Research, 76 (11). pp. 697-700. ISSN 0022-4456

Abdul Hamid, Abdul Hadi Fikri and A. Rashid, Rozeha and Fisal, Norsheila and Syed Yusof, Sharifah Kamilah and Ariffin, S. H. S. and Latiff, Liza (2009) Development of IEEE802.15.4 based wireless sensor network platform for image transmission. International Journal of Engineering & Technology (IJET), 9 (10). pp. 112-118. ISSN 1793-8244 (online) ; 1793-8236 (print)

Abdul Hamid, Mohd. Kamiel and Stachowiak, G. W. (2009) Effect of hard particle grift size on friction coefficents and embedment of automotive braking system. Jurnal Mekanikal (29). pp. 1-18. ISSN 0127-3396

Abdul Hamid, Muhammad Fariq and Abdul Rahim, Zulhasni (2022) Construction 4.0 readiness and challenges for construction skills training institutions in Malaysia. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). pp. 697-706. ISSN 2367-4512

Abdul Hamid, U. Z. and Zamzuri, H. and Yamada, T. and Abdul Rahman, M. A. and Saito, Y. and Raksincharoensak, P. (2018) Modular design of artificial potential field and nonlinear model predictive control for a vehicle collision avoidance system with move blocking strategy. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232 (10). pp. 1353-1373. ISSN 0954-4070

Abdul Hamid, Umar Zakir and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Yahya, Wira Jazair (2016) A safe-distance based threat assessment with geometrical based steering control for vehicle collision avoidance. Journal of Telecommunication, Electronic and Computer Engineering, 8 (2). pp. 53-58. ISSN 2180-1843

Abdul Hanif, Harliansyah and Murad, Noor Azian and Wan Ngah, Wan Zurinah and Mohd. Yusof, Yasmin Anum (2005) Effects of zingiber officinale on superoxide dismutase, glutathione peroxidase, catalase, glutathione and malondialdehyde content in HepG2 cell line. Malaysian Journal of Biochemistry and Molecular Biology, 11 (1). ISSN 1511-2616

Abdul Jabar, Muhammad Hussin and Abdul Manaf, Norhuda and Jamian, Nor Ruwaida (2021) The emergence of phase change material in solar thermal energy: A scientometric review. ASM Science Journal, 16 . pp. 1-9. ISSN 1823-6782

Abdul Jalil, Aishah and Nobuhito, K. and Tokuda, M. (2004) Synthesis of precursor of anti-inflammatory agents by using highly reactive zinc. Medical Journal of Malaysia , 59 . pp. 210-211. ISSN 03005283 (Submitted)

Abdul Jalil, Aishah and Triwahyono, Sugeng and Kurono, Nobuhito and Takasugi, Shingo and Tokuda, Masao (2005) Highly reactive electrogenerated zinc: preparation and its use in cross-coupling reactions. The Journal of The Institution of Engineers, Malaysia, 66 (1). pp. 53-60. ISSN 0126-513X

Abdul Kadir, Azah and Sarip, Shamsul and Nik Mahmood, Nik Hasnaa and Mohd. Yusof, Sha'ri and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Abdul Aziz, Sa'ardin (2015) A review of integrated management system in the offshore oil and gas industry. Journal of Advanced Review on Scientific Research, 12 (1). pp. 11-25. ISSN 2289-7887

Abdul kadir, Bashir Abubakar and Dennis, John Ojur and Abd. Shukur, Muhammad Fadhlullah and Nasef, Mohamed Mahmoud Elsayed and Usman, Fahad (2020) Preparation and characterization of gel polymer electrolyte based on PVA-K2CO3. Polymer-Plastics Technology and Materials, 59 (15). pp. 1679-1697. ISSN 2574-0881

Abdul Kadir, Muhammad Raihan and Mohd. Faudzi, Ahmad Athif and Abdul Rahman, Mohd. Azizi (2022) Performance evaluation for Braided McKibben pneumatic actuators in telescopic nested structure. IEEE Robotics and Automation Letters, 7 (4). pp. 10906-10913. ISSN 2377-3766

Abdul Kareem, Firas A. and Mohd. Shariff, Azmi and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor-binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64 . pp. 173-187. ISSN 1226-086X

Abdul Kari, Zulhisyam and Goh, Khang Wen and Edinur, Hisham Atan and Mat, Khairiyah and Mohd. Khalid, Hazreen-Nita and Rusli, Nor Dini and Mohamad Sukri, Suniza Anis and Che Harun, Hasnita and Lee, Seong Wei and Mohd. Ali Hanafiah, Muhamad Hakim and Rahman, Mohammad Mijanur and Abdul, Mohammad Khairul Azhar (2022) Palm date meal as a non-traditional ingredient for feeding aquatic animals: A review. Aquaculture Reports, 25 (NA). pp. 1-11. ISSN 2352-5134

Abdul Kari, Zulhisyam and Kabir, Muhammad Anamul and Dawood, Mahmoud A. O. and Abdul Razab, Mohammad Khairul Azhar and Nik Ahmad Ariff, Nik Shahman and Sarkar, Tanmay and Pati, Siddhartha and Edinur, Hisham Atan and Mat, Khairiyah and Ismail, Tamer Ahmed and Lee, Seong Wei (2022) Effect of fish meal substitution with fermented soy pulp on growth performance, digestive enzyme, amino acid profile, and immune-related gene expression of African catfish (Clarias gariepinus). Aquaculture, 546 (NA). pp. 1-11. ISSN 0044-8486

Abdul Karim, Khairuddin and Ali, Jusni (1990) Kajian ekonomi tentang pemprosesan ilmenit sebagai bahan pemberat. Buletin FKKKSA, 4 (1). pp. 5-11. ISSN 0128-0740

Abdul Latif, Fazilah (1989) Phenyl boronate column fractionation of high molecular weight RNA. Buletin FKKKSA, 3 (2). pp. 11-19. ISSN 0128-0740

Abdul Latif, Fazilah and Salim, Norizah (1993) Penulenan dan penjujukan protein hirudin daripada lintah tempatan (hirudinaria manillensis) bagi penghasilan protein hirudin secara skala besar pada peringkat industri. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-6.

Abdul Latif, Fazilah (1994) Isolation of antithrombin protein from local leeches (hirudinaria manillensis). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Abdul Latiff, Liza and Mohd. Ramli, Huda Adibah and Asnawi, Ani Liza and Abdul Wahab, Nur Haliza (2022) A study of channel and delay-based scheduling algorithms for live video streaming in the fifth generation long term evolution-advanced network. IIUM Engineering Journal, 23 (1). pp. 233-243. ISSN 1511-788X

Abdul Majid, Zulkifli and Nasir, Abu Samah and Yunus, Sofiah (1995) Kesan kelembapan ke atas kadar kebocoran gas. Buletin FKKKSA . pp. 31-41. ISSN 0128-0740

Abdul Majid, Roshida and Leng, Pau Chung and Sanusi, Sani Maimagani (2022) Thermal performance of classroom block: a comparison of hobo datalogger and design-builder. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 224-237. ISSN 0128-1666

Abdul Majid, Roshida and Tan, Hui Ping (2022) The importance of visual comfort in Malaysian shop office by artificial lighting. Malaysian Journal of Sustainable Environment, 7 (25). pp. 159-176. ISSN 0128-326X

Abdul Majid, Fadzilah Adibah and Al-Rubeai, Mohamed (2001) The effect of bcl-2 over-expression on hybridoma cell line cultured in different serum free media. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 524-530.

Abdul Majid, Zulkifli (1992) Liquefied natural gas. Buletin FKKKSA, 6 (1). pp. 15-20. ISSN 0128-0740

Abdul Majid, Zulkifli and Yaacob, Zulkefli and King, Martin Philip Ik Pau and Yahya, Mohd Adnan and Abd. Razak, Mohd. Masri (2001) Emission characteristics of bi-fuel motorcycle. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 372-377.

Abdul Manaf, Norhuda and Abbas, Ali (2021) Investment decision making for carbon capture and storage technology in high efficiency, low-emission coal-fired power plant via dynamic techno-economic-policy evaluation framework: Case study in China. Chemical Engineering Transactions, 83 . pp. 25-30. ISSN 2283-9216

Abdul Manaf, Norhuda and Mohd. Shadzalli, Zahrul Faizi and Kamaruzaman, Nursyuhada’ (2022) Waste-energy-climate nexus perspective towards circular economy: a mini review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26 (1). pp. 31-41. ISSN 2462-1943

Abdul Manaf, Nur'Azah and Abu Bakar, Mohd. Rizam and Ibragimov, Gafurjan (2015) Utilization of reproducing kernel hilbert space method. International Journal Of Applied Mathematics And Statistics, 53 (6). pp. 167-172.

Abdul Manan, Zainuddin (2003) Systematic design and synthesis of heat, mass and water recovery networks using pinch analysis. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 443-446.

Abdul Manan, Zainuddin and Yin, Ling Tan and Chwan, Dominic Yee Foo (2004) Targeting the minimum water flow rate using water cascade analysis technique. AIChE Journal, 50 (12). pp. 3169-3183.

Abdul Manan, Zainuddin (2001) Maximizing energy efficiency in the process industries using pinch analysis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 484-491.

Abdul Manan, Zainuddin and Mohd Yusof, Feruz (1994) Retrofit of palm oil refinery to improve energy consumption and reduce fouling costs. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Abdul Manan, Zainuddin and Ooi, Boon Lee (2001) A software for energy optimisation using pinch analysis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 266-270.

Abdul Rabu, S. N. and Mohd. Mahdzir, A. and Aris, B. and Tasir, Z. (2017) Assessing critical thinking skills of faculty of education undergraduate students with MaCTIv4 (Malaysian critical thinking instrument - Version 4). Man in India, 97 (17). pp. 105-119. ISSN 0025-1569

Abdul Rahim, Abd. Rahman and Roslan, Roslina (2018) A shariah-compliant airport framework from the perspective of passengers at KL international airport. Advanced Research in Social and Behavioural Science, 10 (1). pp. 9-24. ISSN 2462-1951

Abdul Rahim, Herlina and Zulkifli, Syahidah Nurani and Ghazali, Rashidah and Abd. Rahim, Intan Maisarah (2022) Non-invasive measurement of shear force in chicken meat using near infrared spectroscopy supported by neural network analysis. Journal Of Tomography System & Sensors Application, 5 (2). pp. 24-31. ISSN 2636-9133

Abdul Rahim, Zulhasni and Abdul Rahman, Nor Azian and Iqbal, Muhamad Saqib (2022) The National Industry 4.0 Policy performance review based on Industry4WRD readiness assessment and intervention program. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). pp. 688-696. ISSN 2367-4512

Abdul Rahman, Alias and Zlatanova, Sisi and Pilouk, Morakot (2001) The 3D GIS software development : global efforts from researchers and vendors. Geoinformation Science Journal, 1 (2).

Abdul Rahman, Mohd. Azizi and Zamzuri, Hairi (2018) Vehicle localization using wheel speed sensor (WSS) and inertial measurement unit (IMU). Journal of the Society of Automotive Engineers Malaysia, 2 (1). pp. 43-59. ISSN 2550-2239

Abdul Rahman, Norhafizah and Shamsuddin, Shuhana and Ghani, Izham (2015) What makes people use the street?: Towards a liveable urban environment in Kuala Lumpur city centre. Asian Conference on Environment-Behaviour Studies (ACE-BS 2014 Seoul), 170 . pp. 624-632. ISSN 1877-0428

Abdul Rahman, Alias (1994) A Program To Generalize Contour Lines. Buletin Ukur, 5 (2). pp. 89-103. ISSN 0128-4274

Abdul Rahman, Alias (1994) Digital Terrain Model Data Structures. Buletin Ukur, 5 (1). pp. 61-72. ISSN 0128-4274

Abdul Rani, Mohd. Haris and Yusof, Muhammad Fathi and Mohd. Mahdzir, Akbariah and Awang, Adibah and Jaafar, A. Bakar and Shaukat, Sharina and Abu Hassan, Hairil Anuar (2017) Legal considerations on OTEC deployment in Malaysia. Journal of Science, Technology and Innovation Policy, 3 (1). pp. 34-39. ISSN 2550-2018

Abdul Razak, Mohd. Razif (1991) Downhole measurement: MWD. Buletin FKKKSA, 5 (2). pp. 47-52. ISSN 0128-0740

Abdul Talib, Hayati and Jamaludin, Khairur Rijal (2003) Aplikasi teknologi maklumat (IT) dalam pengurusan organisasi : sorotan kajian. Jurnal teknikal dan kajian sosial, 1 (2). pp. 89-105. ISSN 1675-2228

Abdul Wahab, A. M. and Nuh, A. and Rasid, Z. A. and Abu, A. and Tanasta, Z. and Hassan, M. Z. and Mahmud, J. (2018) Tensile behaviours of single-walled carbon nanotubes. Materialwissenschaft UND Werkstofftechnik, 49 (4). pp. 467-471. ISSN 0933-5137

Abdulghafor, R. and Abdullah, S. S. and Turaev, S. and Zeki, A. and Al-Shaikhli, I. (2020) Linear and nonlinear stochastic distribution for consensus problem in multi-agent systems. Neural Computing and Applications, 32 (1). pp. 261-277. ISSN 0941-0643

Abdulghafor, Rawad and Abdullah, Shahrum Shah and Turaev, Sherzod and Othman, Mohamed (2018) An overview of the consensus problem in the control of multi-agent systems. Journal for Control, Measurement, Electronics, Computing and Communications, 59 (3). pp. 143-157. ISSN 0146-4116

Abdullah, Abdul Hamid and Shahrudin, Shahrin (1989) Pengurusan dan rawatan bahan buangan berjadual di Malaysia. Buletin FKKKSA, 3 (1). pp. 1-16. ISSN 0128-0740

Abdullah, C. and Kaidi, H. A. and Sarip, S. and Shafie, N. (2021) Small scale standalone solar and tidal hybrid power system in isolated area. Renewable Energy Focus, 39 . ISSN 1755-0084

Abdullah, D. and Abd. Aziz, M. I. and Mohd. Ibrahim, A. L. (2017) The stories they tell: understanding international student mobility through higher education policy. Journal of Studies in International Education, 21 (5). pp. 450-466. ISSN 1028-3153

Abdullah, Mohammad Faiz Liew and Elrowayati, Ali A. and Abdul Manaf, Azizah and Zubi, Zakaria Suliman (2015) Recent methods and techniques in video watermarking and their applicability to the next generation video codec. Journal of Theoretical and Applied Information Technology, 74 (1). pp. 93-103. ISSN 1992-8645

Abdullah, N. H. and Shameli, K. and Abdullah, E. C. and Abdullah, L. C. (2017) A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles. Chinese Chemical Letters, 28 (7). pp. 1590-1596. ISSN 1001-8417

Abdullah, N. H. and Shameli, K. and Nia, P. M. and Etesami, M. and Abdullah, E. C. and Abdullah, L. C. (2020) Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction. Arabian Journal of Chemistry, 13 (1). pp. 1297-1308. ISSN 1878-5352

Abdullah, N. H. and Shameli, K. and Etesami, M. and Chan Abdullah, E. and Abdullah, L. C. (2017) Facile and green preparation of magnetite/zeolite nanocomposites for energy application in a single-step procedure. Journal of Alloys and Compounds, 719 . pp. 218-226. ISSN 0925-8388

Abdullah, Noraini and Ismail, Saiful Azmi and Yuhaniz, Siti Sophiayati and Mohd. Sam, Suriani (2015) Data quality in big data: A review. Interntional Journal Of Advances In Soft Computing And Its Applications, 7 (Specia). pp. 16-27. ISSN 2074-8523

Abdullah, Nur Iffah Shafiqah and Ahmad, Mansor and Shameli, Kamyar (2015) Biosynthesis of silver nanoparticles using Artocarpus elasticus stem bark extract. Chemistry Central Journal, 9 . p. 61. ISSN 1750-6220

Abdullah, Nurul Hidayah and Shameli, Kamyar and Abdullah, Ezzat Chan and Abdullah, Luqman Chuah (2019) Solid matrices for fabrication of magnetic iron oxide nanocomposites: Synthesis, properties, and application for the adsorption of heavy metal ions and dyes. Composites Part B: Engineering, 162 . pp. 538-568. ISSN 1359-8368

Abdullah Ghazali, Noor Iziddin and Mohd. Izhar, Mohd. Azri and Akmam Dziyauddin, Rudzidatul (2020) Energy cost reduction for telecommunication towers using hybrid energy storage. InternationalJournal of Advanced Trends in Computer Science and Engineering, 9 (1.5). pp. 213-218. ISSN 2278-3091

Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida and Syed Khuzzan, Sharifah Mazlina (2020) Risk factors towards public-private partnerships (PPP) projects implementing building information modelling (BIM) in the United Kingdom (UK): A lesson learnt for Malaysia. Planning Malaysia, 18 (4). pp. 340-351. ISSN 1675-6215

Abdullah, Khairul Anuar (1994) The Design of L3D-HEIGHT Program for Orthometric Height Determination Using GPS And Terrestrial Geodetic Data. Buletin Ukur, 5 (2). pp. 79-87. ISSN 0128-4274

Abdullahi, Muhammad and Othman, Nooraini (2020) Bridging the gap between policy intent and implementation. Journal Of Science, Technology & Innovation Policy, 6 (1). pp. 1-10. ISSN 2550-2018

Abdullahi, Mu’azu Mohammed and Mas’ud, Abdullahi Abubakar and Mas’ud, Ibrahim Abubakar and Ardila-Rey, Jorge Alfredo and Muhammad-Sukki, Firdaus and Karim, Ridoan and Mohd. Saudi, Ahmad Shakir and Bani, Nurul Aini and Wirba, Asan Vernyuy (2021) A review of building integrated photovoltaic: case study of tropical climatic regions. International Journal of Power Electronics and Drive Systems, 12 (1). pp. 474-488. ISSN 2088-8694

Abdulrahman, Hamdi and Muhamad, Rahimah and Visintin, Phillip and Shukri, Ahmad Azim (2022) Mechanical properties and bond stress-slip behaviour of fly ash geopolymer concrete. Construction and Building Materials, 327 (NA). pp. 1-21. ISSN 0950-0618

Abdur Razzak, M. and Bhuiyan, W. T. and Natasha, N. I. and Muzahidul Islam, A. K. M. and Amin, M. K. M. (2016) Design of a grid-connected photovoltaic inverter with maximum power point tracking using perturb and observe technique. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1212-1220. ISSN 2088-8694

Abidin, N. A. Z. and Abdullah, M. P. and Al-Qaim, F. F. and Khalik, W. M. A. W. M. and Othman, M. R. (2018) Assessing stir bar sorptive extraction for triazine herbicides extraction by using a central composite design approach. Malaysian Journal of Analytical Sciences, 22 (1). ISSN 1394-2506

Abolghasemi, Maryam and Ismail, Syuhaida and Mohd. Sharif, Normawati and Kookhdan, Alireza Rezanezhad and Mardani, Abbas (2018) Enhancing the performance of residential construction project through stakeholder satisfaction: the application of structural equation modelling (SEM). Transformations in Business & Economics, 17 (2). pp. 107-136. ISSN 1648-4460

Abookazemi, Kaveh and Mustafa, Mohd. Wazir and Ahmad, Hussein (2009) Structured genetic algorithm technique for unit commitment problem. International Journal of Recent Trends in Engineering, 1 (3). pp. 135-139. ISSN 1797-9617

Abouzari-lotf, Ebrahim Abouzari and Nasef, Mohamed Mahmoud and Ghassemi, Hossein and Zakeri, Masoumeh and Ahmad, Arshad and Abdollahi, Yadollah (2015) Improved methanol barrier property of Nafion hybrid membrane by incorporating nanofibrous interlayer self-immobilized with high level of phosphotungstic acid. ACS Applied Materials and Interfaces, 7 (31). pp. 17008-17015. ISSN 1944-8244

Abrianto, H. H. and Mohamed, N. and Dziyauddin, R. A. and Sam, S. M. (2020) Reconfiguration of double stub feeding in microstrip antenna array for wlan and wimax. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.5). pp. 266-272. ISSN 2278-3091

Abu, F. and Gholami, H. and Zakuan, N. and Saman, M. Z. M. and Streimikiene, D. and Streimikis, J. (2020) The influence of contextual factors on the implementation of lean practices: an analysis of furniture industries. Amfiteatru Economic, 22 (55). ISSN 1582-9146

Abu, M. Y. and Jamaluddin, K. R. and Zakaria, M. A. (2016) Classification of crankshaft remanufacturing using Mahalanobis-Taguchi system. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3413-3422. ISSN 2229-8649

Abu, M. Y. and Jamaludin, K. R. and Zakaria, M. A. (2017) Characterisation of activity based costing on remanufacturing crankshaft. International Journal of Automotive and Mechanical Engineering, 14 (2). pp. 4211-4224. ISSN 2229-8649

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, A. F. (2005) Effect of oil palm empty fruit bunch and acrylic impact modifier on mechanical properties and processability of unplasticized poly(vinyl chloride) composites. Polymer-Plastics Technology and Engineering, 44 . pp. 1125-1137. ISSN 0360-2559

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, A. F. (2005) Mechanical and thermal properties of oil palm empty fruit bunch-filled unplasticized poly (vinyl chloride) composites. Polymers & Polymer Composites, 13 (6). pp. 607-618. ISSN 0967-3911

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, Ahmad Fuad (2005) Effect of accelerated weathering on the mechanical properties of oil palm empty fruit bunch filled UPVC composites. Iranian Polymer Journal, 14 (7). pp. 627-635.

Abu Bakar, Kamalrulnizam and Bernard, S. Doherty (2007) An enhancement of the random sequence 3-level obfuscated algorithm for protecting agents malicious hosts. International Journal of Computers Communication & Control, 2 (2). pp. 159-173. ISSN 1841-9836

Abu Bakar, Karimah@Aminah and Abdul Rahim,, Nor Zairah and Ibrahim, Roslina (2015) Measurement model of relationship between knowledge management enablers and knowledge management performance in public sector. Lecture Notes In Business Information Processing, 224 . pp. 146-159. ISSN 1865-0473

Abu Bakar, Nur Azaliah and Mohd. Samsudin, Siti Syakirah (2018) A study on implementation of PKI towards paperless and digitization hospital in Malaysia. Open International Journal of Informatics (OIJI), 6 (2). pp. 84-93. ISSN 2289-2370

Abu Bakar, Nur Azaliah and Sjarif, Nilam Nur Amir and Al-Mahrezi, Juma (2022) Development and validation of a questionnaire for digital government competency framework of Omani public sector managers. Open International Journal Of Informatics, 10 (1). pp. 98-108. ISSN 2289-2370

Abu Bakar, Nur Azaliah and Ya'acob, Suraya and Hassan, Noor Hafizah (2018) Digital workplace model for research university publication collaboration. International Journal Of Human And Technology Interaction (IJHATI), 2 (2). pp. 91-102. ISSN 2590-3551

Abu Bakar, S. H. and Muhammad Sukki, F. and Freier, D. and Ramirez Iniguez, R. and Mallick, T. K. and Munir, A. B. and Mohd. Yasin, S. H. and Abubakar Masud, A. and Bani, N. A. (2016) Performance analysis of a solar window incorporating a novel rotationally asymmetrical concentrator. Energy, 99 . pp. 181-192. ISSN 0360-5442

Abu Hassan, Mohd Ariffin and Yusof, Rozilawati and Muhamad, Siti Hajar Anaziah (2007) Fenton degradation of linear alkylbenzene sulphonates (LAS). Journal of Chemical and Natural Resources Engineering, 2 . pp. 22-30. ISSN 1833-5255

Abu Hassan, Mohd. Ariffin and Metcalfe, Ian S. (2007) Catalytic wet air oxidation of linear alkylbenzene sulphonate. Journal of Chemical and Natural Resources Engineering, 1 . pp. 1-14. ISSN 1823-5255

Abu Hassan , Mohd Ariffin and Mantzavinos, Dionissios and Metcalfe, Ian S. (2005) Wet air oxidation and ultrasound for the removal of linear alkylbenzene sulfonates from wastewater: the beneficial role of catalysis. Topics in Catalysis, 33 (1-4). pp. 141-148. ISSN 1022-5528

Abu Husain, M. K. and Mohd Zaki, N. I. and Mallahzadeh, H. and Najafian, G. (2016) Short-term probability distribution of the extreme values of offshore structural response by an efficient time simulation technique. Ships and Offshore Structures, 11 (3). pp. 286-299. ISSN 1744-5302

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2019) Efficient time simulation method for predicting the 100-year extreme responses of an offshore platform. Ships and Offshore Structures, 14 (sup1). pp. 401-409. ISSN 1744-5302

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2017) Various methods of simulating wave kinematics on the structural members of 100-year responses. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3256-3273. ISSN 2289-4659

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Che Husin, Siti Mahirah and Mukhlas, Nurul ‘Azizah and Ahmad, Robiah and Adanan, Aina Farhanah and Ahmad Sukri, Ikmal Alif and Abu Husain, Nurulakmar (2020) Wave energy converter using electromagnetic induction. International Journal Of Advanced Research In Engineering And Technology, 11 (9). pp. 860-875. ISSN 0976-6480

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Najafian, Gholamhossein (2017) Prediction of offshore structural response extreme values by three different approaches of efficient time simulation technique. Ships and Offshore Structures, 12 (2). pp. 290-301. ISSN 1744-5302

Abu-Bakar, S. H. and Muhammad-Sukki, F. and Freier, D. and Ramirez-Iniguez, R. and Mallick, T. K. and Munir, A. B. and Yasin, S. H. M. and Mas'Ud, A. A. and Abu-Bakar, S. S. and Bani, N. A. and Muhtazaruddin, M. N. (2017) Potential of implementing the low concentration photovoltaic systems in the United Kingdom. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1398-1405. ISSN 2088-8708

Abubakar, N. and Abdullah, R. and Hong, A. K. B. and Yassin, M. S. (2017) Modified approach for transverse reinforcement design of bridge deck slab on prestressed concrete T-beam girders. International Journal of Civil Engineering and Technology, 8 (8). pp. 1239-1246. ISSN 0976-6308

Abubakar, Sabiran and Arsad, Norhana and Ehsan, Abang Annuar and Hamzah, Azura and Ariffin, Nur Hazliza and Ab-Rahman, Mohammad Syuhaimi (2019) Performance analysis of disposable flow cell for nitrite detection. IEEE Access, 7 . pp. 146024-146036. ISSN 2169-3536

Abubakar Mas’ud, Abdullahi and Sundaram, Arunachalam and Ardila-Rey, Jorge Alfredo and Schurch, Roger and Muhammad-Sukki, Firdaus and Bani, Nurul Aini (2021) Application of the gaussian mixture model to classify stages of electrical tree growth in epoxy resin. Sensors, 21 (7). p. 2562. ISSN 1424-8220

Abul Hossain, Khandoker and Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Ani, Farid Nasir (2005) Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner. Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner . pp. 107-118. ISSN 0127-118

Adam, Ismahayati and Ibrahim, Mohd. Haniff and Mohd. Kassim, Norazan and Mohammad, Abu Bakar and Mohd. Supa’at, Abu Sahmah (2008) Design of Arrayed Waveguide Grating (AWG) for DWDM/CWDM applications based on BCB polymer. Elektrika, 10 (2). pp. 18-21. ISSN 0128-4428

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2016) Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal. SpringerPlus, 5 (1). ISSN 2193-1801

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2017) Improving EEG signal peak detection using feature weight learning of a neural network with random weights for eye event-related applications. Sadhana - Academy Proceedings in Engineering Sciences, 42 (5). pp. 641-653. ISSN 0256-2499

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Mubin, M. (2016) Evaluation of different peak models of eye blink EEG for signal peak detection using artificial neural network. Neural Network World, 26 (1). pp. 67-89. ISSN 1210-0552

Adam, A. and Ramlan, N. A. and Jaharudin, N. F. and Hamzah, H. and Othman, M. F. and Mrwan, A. A. G. (2017) Analysis of combustion characteristics, engine performance and exhaust emissions of diesel engine fueled with upgraded waste source fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199

Adam, I. and M. Yasin, M. N. and Soh, P. J. and Kamardin, K. and Jamlos, M. F. and Lago, H. and Razalli, M. S. (2017) A simple wideband electromagnetically fed circular polarized antenna for energy harvesting. Microwave and Optical Technology Letters, 59 (9). pp. 2390-2397. ISSN 0895-2477

Adam, Mohamad Zulkefli and Shafie, Noraimi and Abas, Hafiza and Azizan, Azizul (2021) Analysis of momentous fragmentary formants in Talaqi-like neoteric assessment of Quran recitation using MFCC miniature features of Quranic syllables. International Journal of Advanced Computer Science and Applications, 12 (9). pp. 533-540. ISSN 2158-107X

Adediran, A. O. and Mohd. Ali, H. (2019) Unleashing the potentials of housing affordability among the Nigeria low-middle income groups. International Journal of Scientific and Technology Research, 8 (7). ISSN 2277-8616

Adela, Hana and Jasmi, Kamarul Azmi and Basiron, Bushrah and Huda, Miftachul and Maseleno, Andino (2018) Selection of Dancer Member Using Simple Additive Weighting. International Journal of Engineering & Technology, 7 (3). pp. 1096-1107. ISSN 2227-524X

Adesipo, Adegbite and Fadeyi, Oluwaseun and Kuca, Kamil and Krejcar, Ondrej and Maresova, Petra and Selamat, Ali and Adenola, Mayowa (2020) Smart and climate-smart agricultural trends as core aspects of smart village functions. Sensors (Switzerland), 20 (21). pp. 1-22. ISSN 1424-8220

Adli, Reza Ghaffari and Kianvash, Abbas and Hossein, Mir Ghasem and Hajalilou, Abdollah and Abouzari-Lotf, Ebrahim (2018) Mechanochemically synthesized NiCo2O4/Vulcan/PANI nanocomposite and investigation of its electrochemical behavior as a supercapacitor. Ceramics International, 44 (16). pp. 20049-20057. ISSN 0272-8842

Adzlan, Ahmad and Mat Ali, Mohamed Sukri and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki (2021) Temporal evolution of lift in a pure cruciform system for energy harvesting. Ocean Engineering223, Ocean . p. 108648. ISSN 0029-8018

Affandi, Syafiq and Bidin, Noriah (2015) Pulse laser ablation in liquid induce gold nanoparticle production. Jurnal Teknologi, 74 (8). pp. 41-43. ISSN 0127-9696

Afolabi, H. K. and Nasef, M. M. and Sapiaa, N. A. H. and Harun, N. Y. and Teo, M. T. and Teh, T. H. (2021) Highly boron-selective adsorbent by radiation induced grafting of n-vinylformamide on polyethylene/polypropylene sheet followed by hydrolysis and glycidol treatment. Radiation Physics and Chemistry, 182 . ISSN 0969-

Afolabi, Haruna Kolawole and Nasef, Mohamed Mahmoud and Md. Nordin, Nik Abdul Hadi and Ting, Teo Ming and Harun, Noorfidza Yub and Abbasi, Amin (2021) Facile preparation of fibrous glycidol-containing adsorbent for boron removal from solutions by radiation-induced grafting of poly(vinylamine) and functionalisation. Radiation Physics and Chemistry, 188 (NA). p. 109596. ISSN 0969-806X

Afzali, A. and Rashid, M. and Afzali, M. and Younesi, V. (2017) Prediction of air pollutants concentrations from multiple sources using AERMOD coupled with WRF prognostic model. Journal of Cleaner Production, 166 . pp. 1216-1225. ISSN 0959-6526

Agani, N. and Abu Bakar, Syed Abdul Rahman and Sheikh Salleh, Sheikh Hussain (2007) Application of texture analysis in echocardiography images for myocardial infarction tissue. Jurnal Teknologi (46D). pp. 61-76. ISSN 2180-3722

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Mubarak, Nabisab Mujawar and Khalid, Mohammad and Pudza, Musa Yahaya and Agudosi, Ngozi Patricia and Abutu, Enemona David (2018) Pilot study of in-line continuous flocculation water treatment plant. Journal of Environmental Chemical Engineering, 6 (6). pp. 7185-7191. ISSN 2213-3437

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mohammad Khalid, Mohammad Khalid and Mubarak, Nabisab Mujawar and Aid, Siti Rahmah and Omar, Nurizan (2021) Optimising the fabrication of 3D binder-free graphene electrode for electrochemical energy storage application. Surface and Coatings Technology, 413 . p. 127080. ISSN 0257-8972

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mohammad Khalid, Mohammad Khalid and Mubarak, Nabisab Mujawar and Benages-Vilau, Raúl and Gómez-Romero, Pedro and Aid, Siti Rahmah and Omar, Nurizan (2021) Optimisation of NiO electrodeposition on 3D graphene electrode for electrochemical energy storage using response surface methodology. Journal of Electroanalytical Chemistry, 882 . p. 114992. ISSN 1572-6657

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mubarak, Nabisab Mujawar and Khalid, Mohammad and Omar, Nurizan (2020) A review of the graphene synthesis routes and its applications in electrochemical energy storage. Critical Reviews in Solid State and Materials Sciences, 45 (5). pp. 339-377. ISSN 1040-8436

Ahammed, S. J. and Chung, E. S. and Shahid, S. (2018) Parametric assessment of pre-monsoon agricultural water scarcity in Bangladesh. Sustainability (Switzerland), 10 (3). ISSN 2071-1050

Ahmad, Arshad (1988) Penggunaan komputer di dalam teknologi penapaian. Buletin FKKKSA, 2 (1). pp. 25-28. ISSN 0128-0740

Ahmad, Arshad and Abdul Samad, Nor Asma Fazli and Chow, Ai Wei (2003) Mathematical modeling and analysis of dynamic behaviour of a fed-batch penicilin G fermentation process. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 387-394.

Ahmad, Arshad and Chen, Wah Sit (2003) Improving robustness of artificial neural networks model using genetic algorithm. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 793-800.

Ahmad, Arshad and Ibrahim, Norazana (2003) Simulation and sensitivity analysis of autothermal reforming (ATR) for mobile fuel cell application. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 876-882.

Ahmad, Arshad and Lim, Wan Piang (2003) Development of a robust hybrid estimator using partial least squares regression and artificial neural networks. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 780-787.

Ahmad, Arshad and Ramli, Ahmad Raoof (2003) Dynamic behaviour and sensitivity analysis of 5kW PEMFC stack simulation. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 867-874.

Ahmad, M. A. and Mohamed, Z. and Ismail, Z. H. (2008) Experimental investigation of feedforward control schemes of a flexible robot manipulator system. Elektrika, 10 (2). pp. 28-35. ISSN 0128-4428

Ahmad, Afham Zulhusmi and Abu, Aminudin and Lee, Kee Quen and Othman, Nor A’zizi and Che In, Faridah (2019) Numerical modelling of multiple tuned mass damper equipped with magneto rheological damper for attenuation of building seismic responses. Jurnal Teknologi, 81 (6). pp. 103-113. ISSN 2180-3722

Ahmad, Anuar and Mohamad, Norhafizi and Md. Din, Ami Hassan (2022) A review of UAV photogrammetry application in assessing surface elevation changes. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 195-204. ISSN 0128-1666

Ahmad, F. and Harun, S. W. and Nor, R. M. and Ahmad, H. and Ibrahim, M. H. (2016) Soliton pulse generation using a swcntspolyvinyl alcohol thin film based passive saturable absorber. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6324-6327. ISSN 1819-6608

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishammudin and Aparow, Vimal Rau and Yunos, M. (2018) Simulation and experimental investigation of vehicle braking system employing a fixed caliper based electronic wedge brake. Simulation, 94 (4). pp. 327-340. ISSN 0037-5497

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd. Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling and control of a fixed calliper-based electronic wedge brake. Strojniski Vestnik - Journal of Mechanical Engineering, 63 (3). pp. 181-190. ISSN 0039-2480

Ahmad, Hafed Qasem and Kamaruddin, Samira A. and Agha, Omar M. A. Mahmood and Harun, Sobri B. and Zaaboul, Rashyd (2020) A review of meteorological drought based indices towards integrated water resources management in Iraq. Journal Of Computational and Theoretical Nanoscience, 17 (3). pp. 663-672. ISSN 1546-1955

Ahmad, Imran and Abdullah, Norhayati and Iwamoto, Koji and Yuzir, Ali and Mohamad, Shaza Eva and Show, Pau Loke and Cheah, Wai Yan and Khoo, Kuan Shiong (2022) The role of restaurant wastewater for producing bioenergy towards a circular bioeconomy: A review on composition, environmental impacts, and sustainable integrated management. Environmental Research, 214 (NA). pp. 1-21. ISSN 0013-9351

Ahmad, Imran and Abdullah, Norhayati and Koji, I. and Yuzir, Ali and Mohamad, S. E. (2021) Potential of microalgae in bioremediation of wastewater. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (2). pp. 413-429. ISSN 1978-2993

Ahmad, Imran and Chelliapan, Shreeshivadasan and Othman, Norazli and Mohammad, Roslina and Kamaruddin, Samira Albati (2018) A review of Municipal Solid Waste (MSW) landfill management and treatment of leachate. International Journal of Civil Engineering and Technology, 9 (5). pp. 336-348. ISSN 0976-6308

Ahmad, M. N. and Mahmood, A. K. and Hashim, K. F. and Mustakim, F. and Selamat, Ali and Bajuri, M. Y. and Arshad, N. I. (2021) Artificial intelligence model and correlation for characterization and viscosity measurements of mono & hybrid nanofluids concerned graphene oxide/silica. Journal of Thermal Analysis and Calorimetry, 145 (4). pp. 2209-2224. ISSN 1388-6150

Ahmad, Mohamad Azrin and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Hasannuddin, A. K. and Abu Bakar, Muhammad Aiman and Abd. Fatah, Abdul Yasser and Che Sidik, Nor Azwadi and Noge, Hirofumi (2018) Combustion performance and exhaust emissions fuelled with non-surfactant water-in-diesel emulsion fuel made from different water sources. Environmental Science and Pollution Research, 24 (24). pp. 24266-24280. ISSN 0944-1344

Ahmad, N. A. and Mohd. Drus, S. and Abu Bakar, N. A. (2019) Moderating effect of organisation size in measuring the technology organisation environment and pressure (TOEP) in enterprise architecture adoption. Journal of Theoretical and Applied Information Technology, 97 (14). ISSN 1992-8645

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. (2017) The concept of using reflexivity theory to examine the perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (11). pp. 10883-10886. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Ong, M. H. A. (2017) The mediating effect of personal norms towards the relationship of values and perception of event greening efforts. Advanced Science Letters, 23 (11). pp. 10891-10894. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Ong, M. H. A. and Asri, A. S. M. (2017) Examining the perception of attendees on sustainable efforts towards event greening using the values, beliefs and norms theory. Advanced Science Letters, 23 (11). pp. 10748-10752. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Zamzuri, N. H. and Ong, M. H. A. (2017) The effect of values on the perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (11). pp. 10878-10882. ISSN 1936-6612

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Examining the demand for green events to promote sustainable practices in tourism: a concept paper. Advanced Science Letters, 22 (5-6). pp. 1402-1405. ISSN 1936-6612

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2017) Perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (4). pp. 3237-3240. ISSN 1936-6612

Ahmad, N. L. and Yunus, N. A. M. and Rashid, W. E. W. and Zamzuri, N. H. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Theorizing event attendees behavior to increase the demand for sustainable events. International Business Management, 10 (17). pp. 3853-3859. ISSN 1993-5250

Ahmad, N. H. and Inagaki, A. and Kanda, M. and Onodera, N. and Aoki, T. (2017) Large-eddy simulation of the gust index in an urban area using the lattice boltzmann method. Boundary-Layer Meteorology, 163 (3). pp. 447-467. ISSN 0006-8314

Ahmad, Nurul Fariha and Komatsu, Katsuyoshi and Iwasaki, Takuya and Watanabe, Kenji and Taniguchi, Takashi and Mizuta, Hiroshi and Wakayama, Yutaka and Hashim, Abdul Manaf and Morita, Yoshifumi and Moriyama, Satoshi and Nakaharai, Shu (2019) Fabry–Pérot resonances and a crossover to the quantum hall regime in ballistic graphene quantum point contacts. Scientific Reports, 9 (3031). ISSN 2045-2322

Ahmad, S. and Asmai, S. A. and Zaid, S. Z. and Kama, N. (2019) Shopping assistant app for people with visual impairment: an acceptance evaluation. International Journal of Computing, 18 (3). pp. 285-292. ISSN 1727-6209

Ahmad, Salman and Mat Tahar, Razman and Muhammad-Sukki, Firdaus and Munir, Abu Bakar and Abdul Rahim, Ruzairi (2015) Role of feed-in tariff policy in promoting solar photovoltaic investments in Malaysia: a system dynamics approach. Energy, 84 . pp. 808-815. ISSN 0360-5442

Ahmad, Sufizar and Muhamad, Norhamidi A. and Muchtar, Andanastuti and Sahari, Jaafar and Ibrahim, Mohd. Halim Irwan and Jamaludin, Khairul Rijal and Mohamad Nor, N. H. (2010) Development and characterization of titanium alloy foams. International Journal of Mechanical and Materials Engineering, 5 (2). 244 - 250. ISSN 1823-0334

Ahmad, Yahaya and Yahya, Wira Jazair and Abu Kassim, Khairil Anwar and Koetniyom, Saiprasit and Carmai, Julaluk and Abd. Kadir, Hasannuddina (2019) Driver head kinematic analysis under frontal offset collision during the rebound phase. International Journal of Crashworthiness, 24 (6). pp. 606-614. ISSN 1358-8265

Ahmad, Z. and Thambiratnam, D. (2009) Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading. Computers & Structures, 87 (3-4). pp. 186-197. ISSN 00457949

Ahmad @ Salleh, Noor Azurati and Mohd. Darus, Fauzi and Mohd. Ariffin, Aswami Fadilah (2022) A preliminary study on malware classification using image pattern. Open International Journal Of Informatics, 10 (1). pp. 114-126. ISSN 2289-2370

Ahmad Fadzillah, Nurrulhidayah and Mohd. Sukri, Siti Jamilah and Mat Jubri, Mustafa and Abd. Mutalib, Sahilah and Rosman, Arieff Salleh and Abdul Rohman, Abdul Rohman and Ramli, Mohd. Anuar and Kurt, Nurullah (2020) Islamic and modern science perspectives issues of animal plasma as a source of food additives in food products. International Journal of Advanced Research in Engineering and Technology, 11 (12). pp. 283-305. ISSN 0976-6499

Ahmad Khairi, M. H. and Mazlan, S. A. and Ubaidillaha, U. and Ku Ahmad, K. Z. and Choi, S. B. and Abdul Aziz, S. A. and Yunus, N. A. (2017) The field-dependent complex modulus of magnetorheological elastomers consisting of sucrose acetate isobutyrate ester. Journal of Intelligent Material Systems and Structures, 28 (14). pp. 1993-2004. ISSN 1045-389X

Ahmad Khairi, Muntaz Hana and Abd. Fatah, Abdul Yasser and Mazlan, Saiful Amri and Ubaidillah, U. and Nordin, Nur Azmah and Nik Ismail, Nik Intan and Choi, Seung Bok and Abdul Aziz, Siti Aishah (2019) Enhancement of particle alignment using silicone oil plasticizer and its effects on the field-dependent properties of magnetorheological elastomers. International Journal of Molecular Sciences, 20 (17). p. 4085. ISSN 1661-6596

Ahmad Masudi, Ahmad Masudi and Che Jusoh, Nurfatehah Wahyuny and Oki, Muraza (2020) Recent progress on low rank coal conversion to dimethyl ether as clean fuel: A critical review. Journal of Cleaner Production, 27720 . p. 124024. ISSN 0959-6526

Ahmad Nazri, M. N. and Ismail, Z. H. and Yusof, R. (2016) Fault detection and diagnosis using cubature Kalman filter for nonlinear process systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 63-67. ISSN 2180-1843

Ahmad Sabri, N. S. and Mohd. Mohsi, N. A. F. and Apandi, A. and Yusof, N. and Megat Mohd. Noor, M. J. and Md. Akhir, F. N. and Sugiura, N. and Utsumi, M. and Othman, N. and Zakaria, Z. and Hara, H. (2021) Draft genome sequence of the prazosin-degrading bacillus sp. Strain pr5, isolated from a river receiving hospital and urban wastewater in Malaysia. Microbiology Resource Announcements, 10 (11). ISSN 2576-098X

Ahmad Sekak, Siti Nor Azniza and Mohd. Sazali, Sazarina and Nizam Akbar, Anis Rosniza and Md. Junus, Yusmady (2022) Challenges and opportunities towards industrial revolution 4.0 (IR 4.0) among contractors in Malaysia construction industry. Jurnal Penyelidikan Sains Sosial (JOSSR), 5 (17). pp. 42-49. ISSN 2637-0956

Ahmad Shakri, Md. Rajuna and Zakaria, Rozana and Yahya, Khairulzan and Abd. Samad, Badrul Hisham and Md. Tarekh, Noor Aliza (2012) The sources and factors of tuberculosis transmission at hospital for sustainable indoor air. International Journal of Environmental Protection, 2 (3). pp. 29-32. ISSN 2226-6437

Ahmad Sharif, Mohd Nazir and Mohamad, Kamaruddin Malik and Alias, Rose Alinda and Shahibudin, Shamsul and Zakaria, Nor Hidayati (2004) Knowledge management (KM) framework for representing lessons learned system for communities of practice in institutions of higher learning. Malaysian Journal of Computer Science, 17 (1). pp. 1-12.

Ahmad Tarmizi, Azmil Haizam and Md. Illias, Rosli and Md. Salleh, Madihah and Hassan, Osman and Kamaruddin, Kamarulzaman and Abdul Rahman, Roshanida and Abdul Aziz, Suriani (2003) Production of cyclodextrin glucanotransferase (CGTase) from Bacillus sp. TS1-1: process optimisation. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 236-239.

Ahmad Zaharuddin, Mohd. Faridh and Sharif, Safian and Hasnol, Muhammed Zakariya and Sehun Rhee, Sehun Rhee (2022) Taguchi optimisation on effect of water environment in joining dissimilar al5083 and al6061-t6 aluminium alloy using friction stir welding. Jurnal Mekanikal, 45 . pp. 39-52. ISSN 2289-3873

Ahmad, Anuar (1994) Small Format Photography For Architectural Photogrammetry : A Review. Buletin Ukur, 5 (1). pp. 42-52. ISSN 0128-4274

Ahmad, Arshad (1991) Designing a CIP system. Buletin FKKKSA, 5 (1). pp. 1-4. ISSN 0128-0740

Ahmad, Arshad (1991) Perancangan, penjadualan dan kawalan dalam sistem proses berkelompok. Buletin FKKKSA, 5 (1). pp. 5-13. ISSN 0128-0740

Ahmad, Arshad (1995) Process identification using artificial neural network. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C3-1.

Ahmad, Arshad and Jones, Meirion G (1989) Microcomputer application in measurement and control of fermentation process. Proceedings of The Fifth Symposium of Malaysian Chemical Engineers . pp. 287-296.

Ahmad, Arshad and Ling, Leong Yau (2001) Effect of heat integration on dynamic of a palm-oil fractionation process. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 152-158.

Ahmad, Arshad and Wong, Teck Siang (2001) Neural network inferential estimator for product composition of a fatty acid distillation column. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 191-196.

Ahmad, Baharin (1994) Three-Dimensional Coordinate Determination By Close Range Photogrammetric Method: An Experiment Using Contax RTS 1/1. Buletin Ukur, 5 (2). pp. 135-144. ISSN 0128-4274

Ahmadpoor Samani, S. and Zaleha Abdul Rasid, S. and Sofian, S. (2017) The effect of open-plan workspaces on behavior and performance among Malaysian creative workers. Global Business and Organizational Excellence, 36 (3). pp. 42-52. ISSN 1932-2054

Ahmed, Adel Ali and Fisal, Norsheila (2008) A real-time routing protocol with load distribution in wireless sensor networks. Computer Communications , 31 . 3190-3203 . ISSN 0140-3664

Ahmed, F. and Al Amin, A. Q. and Mohamad, Z. F. and Chenayah, S. (2016) Agriculture and food security challenge of climate change: a dynamic analysis for policy selection. Scientia Agricola, 73 (4). pp. 311-321. ISSN 0103-9016

Ahmed, Mohamed Tahir and Mohd. Amin, Shamsudin (2015) Comparison of face recognition algorithms for human-robot interactions. Jurnal Teknologi, 72 . pp. 73-78. ISSN 0127-9696

Ahmed, Waqar and Che Sidik, Nor Azwadi and Asako, Yutaka (2022) Experimental study on heat transfer improvement in a circular passage using metal oxide and ethylene glycol based well stable nanofluidsac. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (2). pp. 90-105. ISSN 2289-7879

Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Karri, Rama Rao and Mohammad Khalid, Mohammad Khalid and Walvekar, Rashmi and Abdullah, Ezzat Chan and Mazari, Shaukat Ali and Nizamuddin, Sabzoi (2020) Magnetic nanoparticles incorporation into different substrates for dyes and heavy metals removal—A Review. Environmental Science and Pollution Research, 27 (35). pp. 43526-43541. ISSN 0944-1344

Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Mohammad Khalid, Mohammad Khalid and Karri, Rama Rao and Walvekar, Rashmi and Abdullah, Ezzat Chan and Nizamuddin, Sabzoi and Mazari, Shaukat Ali (2021) A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes. Journal of Hazardous Materials, 413 . p. 125375. ISSN 0304-3894

Ahmed Mahrous, Samar and Che Sidik, Nor Azwadi and Saqr, Khalid Mansour (2020) Investigation of Newtonian and power-law blood flow models in a 180°curved pipe at low to medium shear rate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 148-162. ISSN 2289-7879

Ahmed Siddiqui, Jawaid and Yuhaniz, Siti Sophiayati and Memon, Zulfiqar Ali and Amin, Yumna (2021) Improving hate speech detection using machine and deep learning techniques: A preliminary study. Open International Journal of Informatics (OIJI), 9 (2). pp. 21-34. ISSN 2289-2370

AI - Amin, Abul Quasem and V. Rasiah, Rajah Ratneswary and Chenayah, Santha (2015) Prioritizing climate change mitigation: an assessment using Malaysia to reduce carbon emissions in future. Environmental Science and Policy, 50 . pp. 24-33. ISSN 1462-9011

Aichouni, Ahmed Baha Eddine and Abdullah, Haslaile and Ramlie, Faizir (2021) A scientific approach of using the DMAIC methodology to investigate the effect of cutting tool life on product quality and process economics. Engineering Technology & Applied Science Research, 11 (1). pp. 6799-6805. ISSN 2241-4487

Aichouni, Ahmed Baha Eddine and Ramlie, Faizir and Abdullah, Haslaile (2021) Process improvement methodology selection in manufacturing: A literature review perspective. International Journal of Advanced and Applied Sciences, 8 (3). pp. 12-20. ISSN 2313-626X

Aid, S. R. and Uneme, T. and Wakabayashi, N. and Yamazaki, K. and Uedono, A. and Matsumoto, S. (2017) Carrier activation in Mg implanted GaN by short wavelength Nd:YAG laser thermal annealing. Physica Status Solidi (A) Applications and Materials Science, 214 (10). ISSN 1862-6300

Ajmi, Ahmed Ali and Mahmood, Noor Shakir and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah and Sarip, Shamsul and Mad Kaidi, Hazilah (2022) Novel approach to energy management via performance shaping factors in power plants. Computers, Materials and Continua, 73 (3). pp. 5025-5039. ISSN 1546-2218

Akhtar, T. and Zahir, A. and Tareq, M. A. H. and Mahdzir, A. M. (2017) The key motivating factors of employee retention: a resource based view. Prabandhan: Indian Journal of Management, 10 (4). pp. 33-48. ISSN 0975-2854

Akhtar, Tahir and Tareq, Mohammad Ali and Prima Sakti, Muhammad Rizky and Ahmad Khan, Adnan (2018) Corporate governance and cash holdings: the way forward. Qualitative Research in Financial Markets, 10 (2). pp. 152-170. ISSN 1755-4179

Akhtar, Tahir and Tareq, Mohammad Ali and Rashid, Kashif (2020) Chief Executive Officers’ monitoring, board effectiveness, managerial ownership, and cash holdings: evidence from ASEAN. Review of Managerial Science . ISSN 1863-6683

Akinyode, Babatunde Femi and Khan, Tareefhayat and Ahmad, Abdullah Sani (2015) Socio-economic factors in measuring the demand for residential neighbourhood in Nigeria. Asian Social Science, 11 (12). pp. 235-247. ISSN 1911-2017

Akmal Yusof, Siti Nurul and Asako, Yutaka and Faghri, Mohammad and Tan, Lit Ken and Che Sidik, Nor Azwadi and Aziz Japar, Wan Mohd. Arif (2019) Numerical analysis for irreversible processes in a piston-cylinder system. International Journal of Heat and Mass Transfer, 136 . pp. 730-739. ISSN 0017-9310

Akmal Yusof, Siti Nurul and Asako, Yutaka and Tan, Lit Ken and Che Sidik, Nor Azwadi (2018) Piston surface pressure of piston- cylinder system with finite piston speed. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 55-65. ISSN 2289-7879

Akter, A. and Goto, M. and Noor, M. J. M. M. and Muzahidul Islam, A. K. M. and Motoo, U. and Ya, Z. Z. and Parvez, A. (2017) Immobilization of heavy metals in tannery sludge by subcritical water treatment. Chemical Engineering Transactions, 56 . pp. 265-270. ISSN 2283-9216

Al Amin, A. Q. and Alam, G. M. (2016) Impact of El-Ni\xF1o on agro-economics in Malaysia and the surrounding regions: An analysis of the events from 1997-98. Asian Journal of Earth Sciences, 9 (1). pp. 1-8. ISSN 1819-1886

Al Amin, A. Q. and Ambrose, A. F. and Masud, M. M. and Azam, M. N. (2016) People purchase intention towards hydrogen fuel cell vehicles: An experiential enquiry in Malaysia. International Journal of Hydrogen Energy, 41 (4). pp. 2117-2127. ISSN 0360-3199

Al Madhoun, W. A. and Ramli, N. A. and Yahaya, A. S. and Rashid, M. (2016) Temporal distribution of non-methane hydrocarbon (NMHC) in a developing equatorial island. Air Quality, Atmosphere and Health, 9 (3). pp. 303-310. ISSN 1873-9318

Al Mamoon, I. and Muzahidul Islam, A. K. M. and Ahmed, A. and Baharun, S. and Komaki, S. (2017) Priority aware cognitive radio driven hospital system. Wireless Personal Communications, 96 (4). pp. 5973-5994. ISSN 0929-6212

Al Mayahi, Hala Taleb and Ismail, Syuhaida and Wahab, Mohammad Hussaini and Wan Mohd. Rani, Wan Nurul Mardiah and Che Amat, Rohayah (2018) Architectural practices of project communication management in Iraq. Planning Malaysia, 16 (1). pp. 1-14. ISSN 1675-6215

Al-Abri, M. Y. and Abdul Rahim, A. (2022) The difference between entrepreneurship and small and medium-sized enterprises. Baltic Journal of Law & Politics, 15 (1). pp. 807-821. ISSN 2029-0454

Al-Aghbari, Anas and Ithnin, Norafida and Ibrahim, Othman and Saeed, Faisal (2015) Physical security framework for power plants in Yemen. Jurnal Teknologi, 73 (2). pp. 123-131. ISSN 0127-9696

Al-araibi, A. A. M. and Mahrin, M. N. and Yusoff, R. C. M. and Chuprat, S. B. (2019) A model for technological aspect of e-learning readiness in higher education. Education and Information Technologies, 24 (2). pp. 1395-1431. ISSN 1360-2357

Al-Bared, M. A. M. and Harahap, I. S. H. and Marto, A. (2018) Sustainable strength improvement of soft clay stabilized with two sizes of recycled additive. International Journal of GEOMATE, 5 (51). pp. 39-46. ISSN 2186-2982

Al-Bared, M. A. M. and Harahap, I. S. H. and Marto, A. and Mohamad, H. and Abad, S. V. A. N. K. and Mustaffa, Z. (2020) Cyclic behavior of RT-cement treated marine clay subjected to low and high loading frequencies. Geomechanics And Engineering, 21 (5). pp. 433-445.

Al-Hashedi, Khaled Gubran and Magalingam, Pritheega (2021) Financial fraud detection applying data mining techniques: A comprehensive review from 2009 to 2019. Computer Science Review, 40 . ISSN 1574-0137

Al-jaboriy, Saif S. and Sjarif, Nilam Nur Amir and Chuprat, Suriayati and Abduallah, Wafaa Mustafa (2019) Acute lymphoblastic leukemia segmentation using local pixel information. Pattern Recognition Letters, 125 . pp. 85-90. ISSN 0167-8655

Al-Maari, Mohammed Abobakr and Ahmad, Mohd Azmier (2021) Catalytic co-pyrolysis of empty fruit bunch and high-density polyethylene. Chemical Engineering Transactions, 89 . pp. 205-210. ISSN 2283-9216

Al-Mashhadani, Abdul Razak F. Shahatha and Tee, Fu Keat and Kolandaisamy, Raenu and Nandy, Tarak (2022) Speech signal processing based on machine learning and complex processors for baby cry detection system. Journal of Positive School Psychology, 6 (2). pp. 2193-2207. ISSN ISSN 2717-7564

Al-Masoodi, A. H. H. and Ahmad, F. and Ahmed, M. H. M. and Arof, H. and Harun, S. W. (2017) Q-switched ytterbium-doped fiber laser with topological insulator-based saturable absorber. Optical Engineering, 56 (5). ISSN 0091-3286

Al-Masoodi, Ahmed H. H. and Ahmad, Fauzan and Ahmed, Mahmoud H. M. and Al-Masoodi, Abtisam H. H. and Alani, Ibrahim A. M. and Arof, Hamzah and Wadi Harun, Sulaiman (2018) Q-switched and mode-locked ytterbiumdoped fibre lasers with Sb2Te3 topological insulator saturable absorber. IET Optoelectronics, 12 (4). pp. 180-184. ISSN 1751-8768

Al-Qaim, F. F. and Mussa, Z. H. and Yuzir, A. and Abu Tahrim, N. and Hashim, N. and Azman, S. (2018) Transportation of different therapeutic classes of pharmaceuticals to the surface water, sewage treatment plant, and hospital samples, Malaysia. Water (Switzerland), 10 (7). ISSN 2073-4441

Al-Qaim, F. F. and Yuzir, A. and Mussa, Z. H. (2018) Determination of theobromine and caffeine in some malaysian beverages by liquid chromatography-time-of-flight mass spectrometry. Tropical Journal of Pharmaceutical Research, 17 (3). pp. 529-535. ISSN 1596-5996

Al-Qaim, Fouad F. and Abdullah, Md. P. and Othman, Mohamed R. and Mussa, Zainab H. and Zakaria, Zuriati and Latip, Jalifah and Afiq, Wan M. (2015) Investigation of the environmental transport of human pharmaceuticals to surface water: a case study of persistence of pharmaceuticals in effluent of sewage treatment plants and hospitals in Malaysia. Journal of the Brazilian Chemical Society, 26 (6). pp. 1124-1135. ISSN 0103-5053

Al-Qaim, Fouad Fadhil and Abdullah, Md. Pauzi and Othman, Mohamed Rozali and Zakaria, Zuriati and Latip, Jalifa (2012) Different mobile phases and elution programs were optimized to separate seven basic pharmaceuticals using LC-QTOF/MS. International Journal of Biological, Ecological and Environmental Sciences, 1 (3). pp. 72-76. ISSN 2277-4394

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Cooperation and direction as potential components for controlling stress on the perceptions of improving organisation’s performance. International Journal of Systems Assurance Engineering and Management, 8 (1). pp. 327-341. ISSN 9756809

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Enhancing transparency and learning sustainability on the perceptions of improving naval ships’ support performance. International Journal of Systems Assurance Engineering and Management, 8 . pp. 265-289. ISSN 9756809

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Sustainability of knowledge and competencies management on the perceptions of improving ships’ upkeep performance. International Journal of Systems Assurance Engineering and Management, 8 . pp. 230-246. ISSN 9756809

Al-Raqadi, A. M. S. and Rahim, Abdul A. and Masrom, Maslin and Al-Riyami, B. S. N. (2015) An assistive and research framework methodology for ships’ upkeep and repair organisational learning performance. Asian Social Science, 11 (18). pp. 246-260. ISSN 1911-2017

Alamoudi, Abdullah and Saaduddin, Syed Muhammad and Munir, Abu Bakar and Muhammad Sukki, Firdaus and Abu Bakar, Siti Hawa and Mohd. Yasin, Siti Hajar and Karim, Ridoan and Bani, Nurul Aini and Abubakar Mas’ud, Abdullahi and Ardila Rey, Jorge Alfredo and Prabhu, Radhakrishna and Sellami, Nazmi (2019) Using static concentrator technology to achieve global energy goal. Sustainability (Switzerland), 11 (11). pp. 1-22. ISSN 2071-1050

Alatas, I. M. and Kamaruddin, S. A. and Nazir, R. and Irsyam, M. (2016) Effect of weathering on disintegration and shear strength reduction of clay shale. Jurnal Teknologi, 78 (7-3). pp. 93-99. ISSN 0127-9696

Alatas, Idrus M. and Kamaruddin, Samira Albati and Nazir, Ramli and Irsyam, Masyhur and Himawan, Agus (2015) Shear strength degradation of Semarang Bawen clay shale due to weathering process. Jurnal Teknologi, 77 (11). pp. 109-118. ISSN 0127-9696

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2017) Influence of macro-pores on DNAPL migration in double-porosity soil using light transmission visualization method. Transport in Porous Media, 117 (1). pp. 103-123. ISSN 0169-3913

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2017) Quantification of dense nonaqueous phase liquid saturation in double-porosity soil media using a light transmission visualization technique. Journal of Porous Media, 20 (7). pp. 591-606. ISSN 1091-028X

Alazaiza, Motasem Y. D. and Ngien, Su Kong and Bob, Mustafa M. and Kamaruddin, Samira A. and Ishak, Wan Mohd. Faizal (2018) Non-aqueous phase liquids distribution in three-fluid phase systems in double-porosity soil media: Experimental investigation using image analysis. Groundwater for Sustainable Development, 7 . pp. 133-142. ISSN 2352-801X

Albasheer, Hashim and Md. Siraj, Maheyzah and Mubarakali, Azath and Tayfour, Omer Elsier and Salih, Sayeed and Hamdan, Mosab and Suleman Khan, Suleman Khan and Zainal, Anazida and Kamarudeen, Sameer (2022) Cyber-attack prediction based on network intrusion detection systems for alert correlation techniques: a survey. Sensors, 22 (4). pp. 1-15. ISSN 1424-8220

Alfagi, A. S. and Manaf, A. A. and Hamida, B. A. and Hamza, M. G. (2017) A systematic literature review on necessity, challenges, applications and attacks of watermarking relational database. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-3). pp. 101-108. ISSN 2180-1843

Alghamdi, Hanan and Selamat, Ali (2022) Techniques to detect terrorists/extremists on the dark web: A review. Data Technologies and Applications, 56 (4). pp. 461-482. ISSN 2514-9288

Alghenaim, Mohammed Fahad and Abu Bakar, Nur Azaliah and Abdul Rahim, Fiza (2022) Exploring the factors influencing employee awareness of social engineering threats: A review. Applied Mathematics and Information Sciences, 16 (4). pp. 491-500. ISSN 1935-0090

Alhammadi, Abdulraqeb and Hassan, Wan Haslina and El-Saleh, Ayman A. and Shayea, Ibraheem and Mohamad, Hafizal and Daradkeh, Yousef Ibrahim (2022) Conflict resolution strategy in handover management for 4G and 5G networks. Computers, Materials and Continua, 72 (3). pp. 5215-5232. ISSN 1546-2218

Alharbi, Ibrahim Bader A. and Jamil, Rossilah and Nik Mahmood, Nik Hasnaa and Mohamed Shaharoun, Awaluddin (2019) Organizational innovation: a review paper. Open Journal of Business and Management, 7 (3). pp. 1196-1206. ISSN 2329-3292

Ali, A. A. and Hashim, A. M. (2016) Computational Analysis of the Optical and Charge Transport Properties of Ultrasonic Spray Pyrolysis-Grown Zinc Oxide/Graphene Hybrid Structures. Nanoscale Research Letters, 11 (1). ISSN 1931-7573

Ali, Amgad Ahmed and Hashim, Abdul Manaf (2015) Density functional theory study of atomic layer deposition of zinc oxide on graphene. Nanoscale Research Letters, 10 . p. 299. ISSN 1556-276X

Ali, F. and Amin, M. and Ryu, K. (2016) The role of physical environment, price perceptions, and consumption emotions in developing customer satisfaction in Chinese resort hotels. Journal of Quality Assurance in Hospitality and Tourism, 17 (1). pp. 45-70. ISSN 1528-008X

Ali, F. and Hussain, K. and Omar, R. (2016) Diagnosing customers experience, emotions and satisfaction in Malaysian resort hotels. European Journal of Tourism Research, 12 . pp. 25-40. ISSN 1994-7658

Ali, F. and Zhou, Y. and Hussain, K. and Nair, P. K. and Ragavan, N. A. (2016) Does higher education service quality effect student satisfaction, image and loyalty?: a study of international students in Malaysian public universities. Quality Assurance in Education, 24 (1). pp. 70-94. ISSN 0968-4883

Ali, M. A. and Hussin, N. and Abed, I. A. (2019) E-banking fraud detection: a short review. International Journal of Innovation, Creativity and Change, 6 (8). pp. 67-87. ISSN 2201-1315

Ali, M. S. M. and Leong, L. L. and Ramly, M. N. and Shaikh, S. A. Z. and Muhammad, S. (2017) Utilizing open source software running in inexpensive high performance computing system for cfd applications. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3061-3067. ISSN 1819-6608

Ali, Md. Hossen and Kamardin, Kamilia and Maidin, Siti Nurhafizza and Ngu, War Hlaing and Mad Kaidi, Hazilah and Ahmed, Irfanuddin Shafi and Taj, Noureen (2022) Agricultural production system based on IoT. International Journal of Integrated Engineering, 14 (6). pp. 313-328. ISSN 2229-838X

Ali, Md. Hossen and Kamardin, Kamilia and Maidin, Siti Nurhafizza and Ngu, War Hlaing and Mad Kaidi, Hazilah and Ahmed, Irfanuddin Shafi and Taj, Noureen (2022) Wi-Fi fingerprinting for indoor positioning. International Journal of Integrated Engineering, 14 (6). pp. 223-238. ISSN 2229-838X

Ali, Nazri and Rees, S. W. (2009) Linear root water uptake by vegetation. Malaysian Journal of Civil Engineering, 21 (2). pp. 110-124. ISSN 1823-7843

Ali, R. R. and Rahman, W. A. W. A. and Kasmaini, R. M. and Ibrahim, N. and Hasbullah, H. and Sadikin, A. N. and Asli, U. A. and Abouzari, E. (2017) Pineapple peel fibre biocomposite: Characterisation and biodegradation studies. Chemical Engineering Transactions, 56 . pp. 1333-1338. ISSN 2283-9216

Ali, S. M. and Hui, K. H. and Hee, L. M. and Leong, M. S. (2018) Automated valve fault detection based on acoustic emission parameters and support vector machine. Alexandria Engineering Journal, 57 (1). pp. 491-498. ISSN 1110-0168

Ali, Mohamad Wijayanuddin and Hassan, Onn (1992) Pencegahan susutan di dalam industri pemprosesan. Buletin FKKKSA, 6 (1). pp. 39-42. ISSN 0128-0740

Ali, Noorhalieza (1991) Applications of solvent extraction: A summary. Buletin FKKKSA, 5 (2). pp. 40-46. ISSN 0128-0740

Ali, Noorhalieza and Hassan, Onn (1991) Application of reverse osmosis in food processing. Buletin FKKKSA, 5 (1). pp. 35-38. ISSN 0128-0740

Ali, Noorhalieza and M. Rashid, M. Rashid and A., Harun (2001) Pencemaran bunyi trafik di sekitar kawasan persekolahan. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 536-541.

Alismaili, Saleh Nasser Rashid and Shanmugam, Mohana and Kasim, Hairol Adenan and Magalingam, Pritheega (2022) Hospital information system for motivating patient loyalty: A systematic literature review. Journal of Information Technology Management, 14 (SI5). pp. 235-244. ISSN 2008-5893

Alismaili, Saleh Nasser Rashid and Shanmugam, Mohana and Kasim, Hairol Adenan and Magalingam, Pritheega (2022) A modified UTAUT model for hospital information systems geared towards motivating patient loyalty. Journal of Information Technology Management, 14 (SI5). pp. 223-234. ISSN 2008-5893

Aliyu Bello, A. and Ahmad, Arshad and Ripin, Adnan (2015) Process simulation of pineapple juice spray drying. Jurnal Teknologi, 75 (6). pp. 27-34. ISSN 0127-9696

Alizadeh, Mojtaba and Baharun, Sabariah and Zamani, Mazdak and Khodadadi, Touraj and Darvishi, Mahdi and Gholizadeh, Somayyeh and Ahmadi, Hossein (2015) Anonymity and untraceability assessment of authentication protocols in proxy mobile IPv6. Jurnal Teknologi, 72 (5). pp. 31-34. ISSN 0127-9696

Alizadeh, Mojtaba and Zamani, Mazdak and Baharun, Sabariah and Abdul Manaf, Azizah and Sakurai, Kouichi and Anada, Hiroaki and Keshavarz, Hassan and Chaudhry, Shehzad Ashraf and Khan, Muhammad Khurram (2015) Cryptanalysis and improvement of "a secure password authentication mechanism for seamless handover in proxy mobile IPv6 networks". Plos One, 10 (11). 0142716-0142716. ISSN 1932-6203

Alizadeh, Mojtaba and Zamani, Mazdak and Baharun, Sabariah and Hassan, Wan Haslina and Khodadadi, Touraj (2015) Security and privacy criteria to evaluate authentication mechanisms in proxy mobile IPv6. Jurnal Teknologi, 72 (5). pp. 27-30. ISSN 0127-9696

Alkawaz, Mohammed Hazim and Mohamad, Dzulkifli and Saba, Tanzila and Basori, Ahmad Hoirul and Rehman, Amjad (2015) The Correlation Between Blood Oxygenation Effects and Human Emotion Towards Facial Skin Colour of Virtual Human. 3D Research, 6 (2). ISSN 2092-6731

Alkhafaji, Ali A. R. and Amir Sjarif, Nilam Nur and Shahidan, M. A. and Mohd. Azmi, Nurulhuda Firdaus and Md. Sarkan, Haslina and Chuprat, Suriayati (2021) Tamper detection and localization for Quranic text watermarking scheme based on hybrid technique. Computers, Materials and Continua, 68 (1). pp. 77-102. ISSN 1546-2218

Alkhafaji, Ali A. R. and Amir Sjarif, Nilam Nur and Shahidan, M. A. and Mohd. Azmi, Nurulhuda Firdaus and Md. Sarkan, Haslina and Chuprat, Suriayati and Khalaf, Osamah Ibrahim and Al-Khanak, Ehab Nabiel (2021) Payload capacity scheme for Quran text watermarking based on vowels with Kashida. Computers, Materials and Continua, 67 (3). pp. 3865-3885. ISSN 1546-2218

Alnahari, Abdulqudos Y. and Ahmad, Noor Azurati and Yusof, Yusnaidi (2018) Modified weighted centroid algorithm for indoor and outdoor positioning using wireless sensors network. International Journal of Advanced and Applied Sciences, 5 (2). pp. 33-36. ISSN 2313-626X

Alshami, Iyad H. and Ahmad Salleh, Noor Azurati and Sahibuddin, Shamsul (2015) People’s ppresence effect on wlan-based IPS’ accuracy. Jurnal Teknologi, 77 (9). pp. 173-178. ISSN 0127-9696

Ambrose, A. F. and Al-Amin, A. Q. and Rasiah, R. and Saidur, R. and Amin, N. (2017) Prospects for introducing hydrogen fuel cell vehicles in Malaysia. International Journal of Hydrogen Energy, 42 (14). pp. 9125-9134. ISSN 0360-3199

Ameen, O. F. and Younus, M. H. and Aziz, M. S. and Ibrahim, R. R. (2016) Temperature and water level measurement of liquid in a tank using fiber Bragg Grating. Jurnal Teknologi, 78 (3). pp. 261-265. ISSN 0127-9696

Amer, Noor Hafizah and Hudha, Khisbullah and Zamzuri, Hairi and Aparow, Vimal Rau and Zainal Abidin, Amar Faiz and Abdul Kadir, Zulkiffli and Murrad, Muhamad (2018) Adaptive modified Stanley controller with fuzzy supervisory system for trajectory tracking of an autonomous armoured vehicle. Robotics and Autonomous Systems, 105 . pp. 94-111. ISSN 0921-8890

Amin, Zamree and Mohammad, Roslina and Othman, Norazli (2020) Review and comparison of confined space risk assessment tools practised by industry code of practice for safe working in confined space of Malaysia, 2010 (ICOP 2010). Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 16-23. ISSN 2462-1935

Amin, Zamree and Mohammad, Roslina and Othman, Norazli and Amrin, Astuty and Abdul Aziz, Sa'ardin and Maarop, Nurazean (2018) Recent review on legislations related to risk assessment for confined space. International Journal of Mechanical Engineering and Technology, 9 (1). pp. 934-949. ISSN 0976-6340

Amin, Zamree and Mohammad, Roslina and Othman, Norazli and Amrin, Astuty and Abdul Aziz, Saárdin (2018) Recent review on standards related to risk assessment for confined spaces. International Journal of Mechanical Engineering and Technology, 9 (1). pp. 950-969. ISSN 0976-6340

Amir Hamzah Maju, Nurulhasanah and Mansor, Hasmah and Teddy Surya Gunawan, Teddy Surya Gunawan and Ahmad, Robiah (2022) The development of water pollution detector using conductivity and turbidity principles. IIUM Engineering Journal, 23 (2). pp. 104-113. ISSN 1511-788X

Amir Sjarif, Nilam Nur and Mohd. Azmi, Nurulhuda Firdaus and Siti Sophiayati Yuhaniz, Siti Sophiayati Yuhaniz and Wong, Doris Hooi-Ten (2021) A review of market basket analysis on business intelligence and data mining. International Journal of Business Intelligence and Data Mining, 18 (3). pp. 383-394. ISSN 1743-8187

Amiri, I. S. and Alavi, S. E. and Supaat, A. S. M. and Ali, J. and Ahmad, H. (2016) Temporal soliton: generation and applications in optical communications. Jurnal Teknologi, 78 (3). pp. 271-276. ISSN 0127-9696

Ampanatham, Puvanieshvaran and Mad Kaidi, Hazilah and Sarip, Shamsul (2020) Automated electrostatic discharge self-audit system in semiconductor industry. Journal of Advanced Research in Applied Mechanics, 65 (1). pp. 27-31. ISSN 2289-7895

Amran, M. E. and Muhtazaruddin, M. N. and Bani, N. A. and Kaidi, H. M. and Hassan, M. Z. and Sarip, S. and Muhammad-Sukki, F. (2019) Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1180-1188. ISSN 2089-3191

Amran, M. E. and Muhtazaruddin, M. N. and Bani, N. A. and Syed Abd. Rahaman, S. A. and Yusoff, N. M. and Azizul, M. H. and Muhammad-Sukki, F. (2019) Photovoltaic-integrated review and expansion need in green building landscape for bridging the malaysian re policy. Indonesian Journal of Electrical Engineering and Computer Science, 17 (1). pp. 27-35. ISSN 2502-4752

Amran, M. E. and Muhtazaruddin, M. N. and Kamaruddin, S. A. and Muhammad-Sukki, F. and Abu-Bakar, S. H. and Ayub, A. S. and Bani, N. A. and Saudi,, A.S.M. and Ardila-Rey, J. A. (2020) Renewable energy performance of the green buildings: key-enabler on useful consumption yield. IEEE Access, 8 . pp. 95747-95767. ISSN 2169-3536

Amran, Mohd. Effendi and Muhtazaruddin, Mohd. Nabil (2018) Assessment of renewable distributed generation in green building rating system for public hospital. International Journal of Engineering & Technology, 7 (3.15). pp. 40-45. ISSN 2227-524X

Amran, Mohd. Effendi and Muhtazaruddin, Mohd. Nabil and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Ahmad Zaidi, Tauran Zaidi and Kamaluddin, Khairul Azmy and Ardila Rey, Jorge Alfredo (2019) Photovoltaic expansion-limit through a net energy metering scheme for selected Malaysian public hospitals. Sustainability (Switzerland), 11 (18). pp. 1-30. ISSN 2071-1050

Amrin, Astuty and Muhammad Faim, Aezal (2019) High temperature oxidation behaviour of substitution vanadium with iron in ti-6al-4v metal alloy: a review. Open International Journal of Informatics, 7 (1). pp. 84-91. ISSN 2289-2370

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah (2021) Cloud computing acceptance among public sector employees. Telkomnika (Telecommunication Computing Electronics and Control), 19 (1). pp. 124-133. ISSN 1693-6930

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati (2019) Acceptance of cloud computing in the Malaysian public sector: A proposed model. International Journal of Engineering Business Management, 11 . pp. 1-9. ISSN 1847-9790

Ana, A. and Meirawan, D. and Kustiawan, I. and Supriatna, N. and Nugraha, E. and Minghat, A. D. and Muktiarni, Muktiarni and Dwiyanti, V. (2020) Future jobs in coming of industry revolution 4.0. International Journal of Advanced Science and Technology, 29 (5). pp. 567-574. ISSN 2005-4238

Ana, A. and Minghat, Asnul Dahar and Purnawarman, Pupung and Saripudin, S. and Muktiarni, M. and Dwiyanti, Vina and Mustakim, Siti Salina (2020) Students' perceptions of the twists and turns of e-learning in the midst of the covid 19 outbreak. Revista Romaneasca Pentru Educatie Multidimensionala, 12 (1). pp. 15-26. ISSN 2066-7329

Anawar, Syarulnaziah and Othman, Nur Fadzilah and Selamat, Siti Rahayu and Ayop, Zakiah and Harum, Norharyati and Abdul Rahim, Fiza (2022) Security and privacy challenges of big data adoption: a qualitative study in telecommunication industry. International Journal of Interactive Mobile Technologies, 16 (19). pp. 81-97. ISSN 1865-7923

Andina Syafrina, Andina Syafrina and Abas, Norzaida and O., Noor Shazwani (2018) Stochastic modeling of rainfall series in Kelantan using an advanced weather generator. Engineering Technology & Applied Science Research, 8 (1). pp. 2537-2541. ISSN 2241-4487

Ang, C. K. and Tey, W. Y. and Kiew, P. L. and Fauzi, M. (2017) An artificial intelligent approach using fuzzy logic for sleep quality measurement. Journal of Mechanical Engineering, SI 4 (2). pp. 31-47. ISSN 1823-5514

Ang, J. H. and Yusup, Y. and Salim, S. A. Z. S. and Ahmad, M. I. (2019) A CFD study of flow around an elevator towards potential kinetic energy harvesting. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 54-65. ISSN 2289-7879

Ang, J. H. and Yusup, Y. and Zaki, S. A. and Salehabadi, A. and Rahman, M. B. A. and Ahmad, M. I. (2020) A review on kinetic energy harvesting towards innovative technological advances from sustainable sources. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 12-41. ISSN 2289-7879

Anggoro, Didi Dwi and Saidina Amin, Nor Aishah (2001) Hydroxyl group studies by FTIR and catalytic activity of dealuminated ZSM-5 zeolite for ethylene conversion. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 58-63.

Ani, Farid Nasir and Badawi, E.M and Kannan, K.S (2005) The Effect of Absorber Packing Height on the Performance of a Hybrid Liquid Desiccant System. Renewable Energy, 30 (15). pp. 2247-2256. ISSN 09601481

Anisa, N. I. and Morad, N. A. and Iwai, Y. and Shah Ismail, M. H. (2016) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . 197.e1-197.e10. ISSN 0378-3812

Anisa, Nor Ilia and Morad, Noor Azian and Iwai, Yoshio and Shah Ismail, Mohd. Halim (2015) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . 197.e1-197.e10. ISSN 0376-7388

Annanurov, B. and Noor, N. (2021) A compact deep learning model for khmer handwritten text recognition. IAES International Journal of Artificial Intelligence, 10 (3). ISSN 2089-4872

Anuar, Asyraf Wahi and Kama, Nazri and Azmi, Azri and Mohd. Rusli, Hazlifah and Yahya, Yazriwati (2022) Re-CRUD code automation framework evaluation using DESMET feature analysis. International Journal of Advanced Computer Science and Applications, 13 (5). pp. 437-452. ISSN 2158-107X

Anuar, L. and Amrin, A. and Mohamad, R. and Aziz, S. A. and Toozandehjani, M. (2019) Development of proving ground field test for establishment of vehicle accelerated corrosion test procedure in Malaysia. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6348-6356. ISSN 2229-8649

Anuar, N. S. S. and Kassim, A. A. and Utsumi, M. and Iwamoto, K. and Goto, M. and Shimizu, K. and Othman, N. and Zakaria, Z. and Sugiura, N. and Hara, H. (2017) Characterization of musty odor-producing actinomycetes from tropics and effects of temperature on the production of musty odor compounds. Microbes and Environments, 32 (4). pp. 352-357. ISSN 1342-6311

Anuar, Syahid and Selamat, Ali and Sallehuddin, Roselina (2015) Hybrid artificial neural network with artificial bee colony algorithm for crime classification. Advances in Intelligent Systems and Computing, 331 . pp. 31-40. ISSN 2194-5357

Anwar, N. and Nik Mahmood, N. H. and Yusliza, M. Y. and Ramayah, T. and Noor Faezah, J. and Khalid, W. (2020) Green human resource management for organisational citizenshipbehaviour towards the environment and environmental performance on a university campus. Journal of Cleaner Production, 256 . ISSN 0959-6526

Apandi, N. H. M. and Zuikafly, S. N. F. and Kasim, N. and Mohamed, M. A. and Harun, S. W. and Ahmad, F. (2019) Observation of dark and bright pulses in Q-switched erbium doped fiber laser using graphene nano-platelets as saturable absorber. Bulletin of Electrical Engineering and Informatics, 8 (4). 1358 -1365. ISSN 2089-3191

Araghi, Tanya Koohpayeh and Alarood, Ala Abdulsalam and Araghi, Sagheb Kohpayeh (2021) Analysis and evaluation of template based methods against geometric attacks: A survey. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). pp. 807-814. ISSN 2367-4512

Arai, Norio (2016) Virtual mass of regular polygon at angle of attack. Jurnal Teknologi, 78 (6-5). pp. 49-51. ISSN 0127-9696

Arash, Arami Niya and Xiong, Xiao and Al Ghafri, Saif Z. S. and Jiao, Fuyu and Khamphasith, Martin and Pouya, Ehsan Sadeghi and Sadaghiani, Mirhadi S. and Yang, Xiaoxian and Tsuji, Tomoya and Tanaka, Yukio and Seiki, Yoshio and May, Eric F. (2020) Measurement and modelling of the thermodynamic properties of carbon dioxide mixtures with HFO-1234yf, HFC-125, HFC-134a, and HFC-32: vapour-liquid equilibrium, density, and heat capacity. International Journal of Refrigeration, 118 . pp. 514-528. ISSN 0140-7007

Ardila Rey, J. A. and Ortiz, J. E. and Creixell, W. and Muhammad Sukki, F. and Bani, N. A. (2020) Artificial generation of partial discharge sources through an algorithm based on deep convolutional generative adversarial networks. IEEE Access, 8 . pp. 24561-24575. ISSN 2169-3536

Ariffin, Aini Suzana and Hashmi, Dania Parvez (2018) Enhancing Malaysian entrepreneurs business venture and innovation in tourism industry through knowledge and technology adoption. Journal of Science, Technology and Innovation Policy (JoSTIP), 4 (1). pp. 1-12. ISSN 2550-2018

Ariffin, Aini Suzana and Mathew, Mathew Ferns and Yong, Chen Chen (2015) The challenges of corporatization policy for government research and technology organizations for wealth creation. Journal of Science Technology & Innovation Policy, 1 (2). pp. 1-21. ISSN 2550-2018

Arifin, Rizal and Malyadi, Muhammad and Munaji, Munaji and Buntoro, Ghulam Asrofi and Nurcahyo, Alif Mahendara Bagus and Ridwan, Ridwan and Darminto, Darminto and Johari, Norhasnidawani and Selamat, Ali (2019) Glassy NiTi produced with different cooling times: structural investigation using molecular dynamics simulations. Results in Physics, 15 . pp. 1-3. ISSN 2211-3797

Arifin, Rizal and Winardi, Yoyok and Wicaksono, Yoga Arob and Poriwikawa, Lucky and Darminto, Darminto and Selamat, Ali and Putra, Wawan Trisnadi and Malyadi, Muhammad (2022) Atomic diffusion at the Ni–Ti liquid interface using molecular dynamics simulations. Canadian Metallurgical Quarterly, 61 (3). pp. 359-365. ISSN 0008-4433

Aris, S. A. M. and Bani, N. A. and Muhtazaruddin, M. N. and Taib, M. N. (2018) EEG calmness index establishment using computational of Z-score. International Journal of Engineering & Technology, 7 (4.11). pp. 44-48. ISSN 2227-524X

Arjuna, Nur Amyza and Abdul Wahab, Asnida and Gan, Hong Seng and Mohamad Salim, Maheza Irna and Ramlee, Muhammad Hanif (2022) Lung chest x-ray image segmentation for detection of pneumonia using convolutional neural network. Journal Of Medical Device Technology, 1 (1). pp. 30-37. ISSN 2948-5436

Arof, K. Z. M. and Ismail, S. and Saleh, A. L. (2018) Contractor's performance appraisal system in the Malaysian construction industry: Current practice, perception and understanding. International Journal of Engineering and Technology(UAE), 7 (3). pp. 46-51. ISSN 2227-524X

Arof, K. Z. M. and Ismail, S. and Saleh, A. L. and Wahab, M. H. and Amat, R. C. (2019) Current contractors performance appraisal system in malaysian construction industry: perception amongst construction. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 417-419. ISSN 2278-3075

Arof, K. Z. M. and Ismail, S. and Subramaniam, C. and Azman, S. and Rani, W. N. M. W. M. and Zolkepli, M. F. (2020) Critical strategies for construction players in the adoption of biophilic city concept in Malaysia. Planning Malaysia, 18 (1). pp. 181-192. ISSN 1675-6215

Arshad, Farah Waheeda and Doris, Hooi-Ten Wong and Maarop, Nurazean and Samy, Ganthan Narayana (2019) Review: evaluation of static and animated visualization in meteorology. International Journal of Latest Transactions in Engineering And Science (IJLTES), 8 (1). pp. 14-19. ISSN 2321-0605

Arumugham, Thilagavathi and Husaini, Nur ‘Amirah and Abdullah, Norhayati and Koji, Iwamoto and Mohamad, Shaza Eva (2021) Determination of anaerobic ammonium oxidation (anammox) bacteria in the domestic wastewater. Desalination and Water Treatment, 214 . pp. 355-366. ISSN 1944-3994

Arumugham, Thilagavathi and Husaini, Nur ‘Amirah and Yuzir, Ali and Mohamad, Shaza Eva and Iwamoto, Koji and Abdullah, Norhayati (2020) Anammox reactor treating low strength domestic wastewater: a review. IOP Conference Series: Earth and Environmental Science, 479 (1). pp. 1-12. ISSN 1755-1307

Ary, Angga Kengkongan and Sanjaya, Yuwana and Prabowo, Aditya Rio and Imaduddin, Fitrian and Nordin, Nur Azmah and Istanto, Iwan and Cho, Joung Hyung (2021) Numerical estimation of the torsional stiffness characteristics on urban Shell Eco-Marathon (SEM) vehicle design. Curved and Layered Structures, 8 (1). pp. 167-180. ISSN 2353-7396

As Ari, Muhammad Amir and Ong, Jia Eek (2022) Drone image based illegal crowddetection for COVID-19 disease prevention via convolutional neural networks (CNNS)transfer learning. Journal of Human Centered Technology, 1 (2). pp. 7-16. ISSN 2821-2467

Asadpour, Robabeh and Yavari, Saba and Kamyab, Hesam and Ashokkumar, Veeramuthu and Chelliapan, Shreeshivadasan and Yuzir, Ali (2021) Study of oil sorption behaviour of esterified oil palm empty fruit bunch (OPEFB) fibre and its kinetics and isotherm studies. Environmental Technology and Innovation, 22 . p. 101397. ISSN 2352-1864

Asako, Y. and Hong, C. (2017) On Temperature Jump Condition for Slip Flow in a Microchannel With Constant Wall Temperature. Journal of Heat Transfer, 139 (7). ISSN 0022-1481

Asako, Yutaka and Faghri, Mohammad and Tan, Lit Ken and Che Sidik, Nor Azwadi (2018) Outflow velocity for SIMPLE algorithm for unsteady forced convection flows with variable density. International Communications in Heat and Mass Transfer, 92 . pp. 73-77. ISSN 0735-1933

Asako, Yutaka and Hong, Chungpyo (2017) Turbulent temperature profile in the quasi-fully developed region of a micro-tube. Journal of Thermal Science and Technology, 12 (1). pp. 1-12. ISSN 1880-5566

Asako, Yutaka and Sharma, Manish (2018) Modification of SIMPLE algorithm to handle supercritical natural circulation in a loop. International Journal of Heat and Mass Transfer, 126 . pp. 425-431. ISSN 0017-9310

Asanuma, Yosuke and Faizal, Ferry and M. P., Khairunnisa and Wuled Lenggoro, I. (2022) Deagglomeration of spray-dried submicron particles by low-power aqueous sonication. Advanced Powder Technology, 33 (4). pp. 1-7. ISSN 0921-8831

Asgari, A.A. and Hamid, A.B.A. and Ibrahim, S. and Asgarpour, R. and Quoquab, Farzana (2015) The contribution of knowledge exchange to supplier’s operational performance. Advanced Science Letters, 21 (6). pp. 1807-1810. ISSN 1936-6612

Ashraaf, Muhammad Amirul and Othman, Nooraini (2019) Factors for pornography addiction and its implication on teenager personality. International Journal of Academic Research in Business and Social Sciences, 9 (11). pp. 1148-1160. ISSN 2222-6990

Asiaei, Arash and Ab. Rahim, Nor Zairah (2019) A multifaceted framework for adoption of cloud computing in Malaysian SMEs. Journal of Science and Technology Policy Management, 10 (3). pp. 708-750. ISSN 2053-4620

Asillam, Mohd. Fairos and Mohd. Tobi, Siti Uzairiah and Subari, Mustafa Din (2020) Evaluation of space science R&D via disruptive space technology (DST). Solid State Technology, 63 (6). pp. 6706-6716. ISSN 0038-111X

Askar, A. K. A. J. and Sjarif, N. N. A. (2021) Annotated corpus of mesopotamian-iraqi dialect for sentiment analysis in social media. International Journal of Advanced Computer Science and Applications, 12 (4). ISSN 2158-107X

Aslfattahi, Navid and Saidur, R. and Che Sidik, Nor Azwadi and Mohd. Sabri, Mohd. Faizul and Zahir, Md. Hasan (2020) Experimental assessment of a novel eutectic binary molten salt-based hexagonal boron nitride nanocomposite as a promising PCM with enhanced specific heat capacity. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (1). pp. 73-85. ISSN 2289-7879

Asmi, Ade and Rasli, Amran and Abdul Majid, Muhd. Zaimi and Abdul Rahman, Ismail (2009) Malaysian practitioners perception on knowledge management in construction consulting companies. The Journal of Modern Applied Science, 3 (7). pp. 103-114. ISSN 1913-1844 (Prints); 1913-1852 (Electronic)

Asri, M. A. N. M. and Nawi, M. N. M. and Nadarajan, S. and Osman, W. N. and Harun, A. N. (2016) Success factors of JIT integration with IBS construction projects- a literature review. International Journal of Supply Chain Management, 5 (2). pp. 71-76. ISSN 2051-3771

Atago, Y. and Shimodaira, J. and Araki, N. and Othman, N. B. and Zakaria, Z. and Fukuda, M. and Futami, J. and Hara, H. (2016) Identification of novel extracellular protein for PCB/biphenyl metabolism in Rhodococcus jostii RHA1. Bioscience, Biotechnology and Biochemistry, 80 (5). pp. 1012-1019. ISSN 0916-8451

Atan, F. M. and Zulkifli, N. and Idrus, S. M. and Ismail, N. A. and Zin, A. M. and Ramli, A. and Yusoff, N. M. (2021) Security enhanced dynamic bandwidth allocation algorithm against degradation attacks in next generation passive optical networks. Journal of Optical Communications and Networking, 13 (12). ISSN 1943-0620

Atee, H. A. and Yasari, A. K. and Ahmad, R. and Mohd. Noor, N. (2019) Text in image steganography based on a dynamic non-sequential least significant bit technique in grayscale and rgb images. Journal of Theoretical and Applied Information Technology, 97 (5). ISSN 1992-8645

Atee, Hayfaa Abdulzahra and Ahmad, Robiah and Mohd. Noor, Norliza (2015) Cryptography and image steganography using dynamic encryption on LSB and color image based data hiding. Middle-East Journal of Scientific Research, 23 (7). pp. 1450-1460. ISSN 1990-9233

Athar, Moina and Imdad, Sameer and Zaidi, Sadaf and Mohammad Yusuf, Mohammad Yusuf and Kamyab, Hesam and Klemeš, Jirí Jaromír and Chelliapan, Shreeshivadasan (2022) Biodiesel production by single-step acid-catalysed transesterification of Jatropha oil under microwave heating with modelling and optimisation using response surface methodology. Fuel, 322 (NA). pp. 1-10. ISSN 0016-2361

Athar, Muhammad and Mohd. Shariff, Azmi and Buang, Azizul and Nazir, Salman and Hermansyah, Heri and See, Tan Lian (2019) Process equipment common attributes for inherently safer process design at preliminary design stage. Process Safety and Environmental Protection, 128 . pp. 14-29. ISSN 0957-5820

Atherton, Helen J. and Gulston, Melanie K. and Bailey, Nigel J. and Cheng, Kian-Kai and Zhang, Wen and Clarke, Kieran and Griffin, Julian L. (2009) Metabolomics of the interaction between PPAR-? and age in the PPAR-?-null mouse. Molecular Systems Biology, 5 . ISSN 1744-4292

Atifahsaruchi, S. and Ariff, M. H. M. and Zamzuri, H. and Hassan, N. and Wahid, N. and Zakaria, N. J. (2019) the correlation model of head roll and lateral acceleration during curve driving via hammerstein-wiener. International Journal of Innovative Technology and Exploring Engineering, 8 (9). pp. 2586-2590. ISSN 2278-3075

Aufa, A. N. and Hassan, Mohamad Zaki and Ismail, Zarini (2022) Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: Prospect development. Journal of Alloys and Compounds, 896 (163072). pp. 1-25. ISSN 0925-8388

Aufa, A. N. and Hassan, Mohamad Zaki and Ismail, Zarini (2021) Recent progress of sol-gel coating of pure magnesium in biomedical applications. A review. Malaysian Journal of Medicine and Health Sciences, 17 . pp. 81-88. ISSN 1675-8544

Aufa, A. N. and Hassan, Mohamad Zaki and Ismail, Zarini and Harun, Norhaslinda and Ren, James and Sadali, Mohd. Faizal (2022) Surface enhancement of Ti-6Al-4V fabricated by selective laser melting on bone-like apatite formation. Journal of Materials Research and Technology, 19 (n/a). pp. 4018-4030. ISSN 2238-7854

Aujih, Ahmad Bukhari and Shapiai, Mohd. Ibrahim and Meriaudeau, Fabrice and Tang, Tong Boon (2022) EDR-Net: Lightweight deep neural network architecture for detecting referable diabetic retinopathy. IEEE Transactions on Biomedical Circuits and Systems, 16 (3). pp. 467-478. ISSN 1932-4545

Aung, Lwin Moe and R. M. S., Zetty and Sahekhain, Asnizah and Sandaz, Pyae Sone and Abu, Aminudin (2015) On the improvement of vibration level of crankshaft system using design of experiment. Frontier Of Applied Plasma Technology, 8 (1). pp. 41-46. ISSN 1883-5589

Authin, Emily Amy and Liew, Peng Yen and Klemeš, Jirí Jaromír and Ho, Wai Shin and Che Jusoh, Nurfatehah Wahyuny and Mohammad Rozali, Nor Erniza (2021) Integration of combined heat and power energy systems with gas turbine in locally integrated energy sectors. Chemical Engineering Transactions, 83 . pp. 37-42. ISSN 2283-9216

Awan, A. Majid and Rajpoot, Nasir M. and Hussain, Syed Afaq and Md. Sap, Mohd. Noor (2007) Stack-run adaptive wavelet image compression using wavelet packets. Jurnal Teknologi Maklumat, 19 (2). pp. 101-114. ISSN 0128-3790

Awang, Hapini and Mat Aji, Zahurin and Sheik Osman, Wan Rozaini and Al-Mashhadani, Abdulrazak F. Shahatha and Mat Deli, Mazzlida (2020) Exploring teachers’ satisfaction toward virtual learning environment: Malaysian perspective. Solid State Technology, 63 (3). 0-10. ISSN 0038-111X

Awang, Mariah and Abdul Latif, Amirul Faiz and Mohamed Yusop, Fatimah and Abdul Rahman, Mohammad Ashraf and Hamidon, Nuramidah and Musa, Kamaruzzaman and Ahmad, Faridahanim (2019) Noise study of Air-conditioning system at UTHM Pagoh: a facility management approach. Journal of Industry, Engineering and Innovation, 1 (2). pp. 1-4. ISSN 2672-7382

Awang, N. W. and Ramasamy, D. and Kadirgama, K. and Samykano, M. and Najafi, G. and Che Sidik, Nor Azwadi (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130 . pp. 1163-1169. ISSN 0017-9310

Awang, Suryanti and Yusof, Rubiyah and Arfa, Reza (2012) Multimodal biometrics system: a feature level fusion of physical and behavioral biometric to improve person's identity recognition. ICIC Express Letters, 6 (2). pp. 543-548. ISSN 1881-803X

Awang, Mariyamni (1992) A summary of the graduate programs in the Petroleum Engineering Department, Stanford University. Buletin FKKKSA, 6 (1). pp. 21-25. ISSN 0128-0740

Awang, Mariyamni (1991) Distribution of the CPU time of a reservoir simulator. Buletin FKKKSA, 5 (2). pp. 59-62. ISSN 0128-0740

Ayesh, Najla and Nik Mahmood, Nik Hasnaa and Baroto, Mas Bambang and Mubarak, Samah M. A. (2021) Moderation effect of client special treatment benefits on the relationship between logistics integration and logistics performance in the logistics services providers’ context. Management Science Letters, 11 (7). pp. 2135-2150. ISSN 1923-9335

Ayobami, Kayode Ojo and Ismail, Hairul Nizam and Tanko, Emmanuel Umaru and Musibau, Akintunde Ajagbe (2012) Exploring volunteer tourism as a panacea for sustainable poverty alleviation in Nigeria. International Journal of Research in Management & Technology, 2 (2). pp. 140-146. ISSN 2250-1363 (Print); 2249-9563 (Electronic)

Azaman, Aizreena Azaman and Zulkapri, Izwyn Zulkapri and Abdul Halim, Husnir Nasyuha (2022) Cluster analysis of biomechanical gait data and pain score as a potential classification of severity in knee osteoarthritis. Journal of Human Centered Technology, 1 (2). pp. 33-43. ISSN 2821-2467

Azami, Husna Hafiza R. and Ibrahim, Roslina (2019) Development and evaluation of massive open online course (MOOC) as a supplementary learning tool: an initial study. IntInternational Journal of Advanced Computer Science and Applications, 10 (7). pp. 1-6. ISSN 2158-107X

Azhar, Ahmad Amirul Adlan and Badrul Hisham, Badrul Emran and Abu Bakar, Nur Azaliah (2022) Using the enterprise architecture approach to analyse the current performance of Manchester united football club. Journal of Techno-Social, 14 (1). pp. 28-36. ISSN 229-8940

Azhim, Azran and Shafiq, Mohammad and Rasyada, Rahman and Furukawa, Katsuko and Ushida, Takashi (2015) The impact of acoustic intensity on solution parameters and decellularization using sonication treatment. Journal of Biomaterials and Tissue Engineering, 5 (3). pp. 195-203. ISSN 2157-9083

Azis, Tun Muhammad Norhaizad and Bani, Nurul Aini and Mad Kaidi, Hazilah and Mohd. Aris, Siti Armiza and Muhtazaruddin, Mohd. Nabil and Abd. Jalil, Siti Zura and Mohd. Izhar, Mohd. Azri and Usman, Sahnius (2018) Risk assessment on electrical maintenance activity at Menora Tunnel, Perak. Journal Of Advanced Research In Occupational Safety And Health, 1 (1). pp. 24-31. ISSN 2637-0255

Aziz, A. M. B. N. and Talib, N. B. A. and Ali, W. M. S. B. W. M. and Ismail, F. (2017) Research methodology in adapting service innovation and competitive advantage in Malaysian telecommunications industry. Advanced Science Letters, 23 (9). pp. 8898-8902. ISSN 1936-6612

Aziz, A. R. A. and Aziz, S. A. and Hassan, M. Z. (2017) Noise exposure among maintenance crews of C130H aircraft lead to the hearing impairment. Malaysian Journal of Public Health Medicine, 2017 (Specia). pp. 89-94. ISSN 1675-0306

Aziz, N. A. and Othman, M. F. (2017) Binary classification using SVM for sick and healthy chicken based on chicken’s excrement image. Pertanika Journal of Science and Technology, 25 (S). pp. 315-324. ISSN 0128-7680

Aziz, N. S. A. and Azmi, M. K. N. and Hashim, A. M. (2017) One-pot green synthesis of highly reduced graphene oxide decorated with silver nanoparticles. Sains Malaysiana, 46 (7). pp. 1083-1088. ISSN 0126-6039

Aziz, S. A. and Sam, S. M. and Mohamed, N. and Daud, S. M. and Rashid, S. Z. A. and Abas, H. and Yusof, M. F. and Dziyauddin, R. A. (2020) A review on region of interest-based hybrid medical image compression algorithms. Telkomnika (Telecommunication Computing Electronics and Control), 18 (3). pp. 1650-1657. ISSN 1693-6930

Aziz, S. A. A. and Mazlan, S. A. and Ismail, N. I. N. and Ubaidillah, U. and Choi, S. B. and Khairi, M. H. A. and Yunus, N. A. (2016) Effects of multiwall carbon nanotubes on viscoelastic properties of magnetorheological elastomers. Smart Materials and Structures, 25 (7). ISSN 0964-1726

Aziz Japar, Wan Mohd. Arif and Che Sidik, Nor Azwadi and Saidur, R. and Kamaruzaman, Natrah and Asako, Yutaka and Yusof, Siti Nurul Akmal and Lani, Mohd. Nizam (2022) Hybrid microchannel heat sink with sustainable cooling solutions: numerical model validation. CFD Letters, 14 (4). pp. 91-117. ISSN 2180 - 1363

Aziz Japar, Wan Mohd. Arif and Che Sidik, Nor Azwadi and Saidur, R. and Kamaruzaman, Natrah and Yutaka, Asako and Yusof, Siti Nurul Akmal (2020) The effect of triangular cavity shape on the hybrid microchannel heat sink performance. CFD Letters, 12 (9). pp. 1-14. ISSN 2180-1363

Azizan, Ahmad Azreen and Chelliapan, Shreeshivadasan and Kamyab, Hesam (2019) Safety analysis of ammonia exposure at a chemical plant. Journal of Advanced Research in Occupational Safety and Health, 4 (1). pp. 1-12. ISSN 2637-0255

Azizan, N. A. Z. and Yuzir, A. and Abdullah, N. (2021) Pharmaceutical compounds in anaerobic digestion: a review on the removals and effect to the process performance. Journal of Environmental Chemical Engineering, 9 (5). ISSN 2213-3437

Azizan, Nur Alyaa Zahida and Kamyab, Hesam and Yuzir, Ali and Abdullah, Norhayati and Kirpichnikova, Irina and Oryani, Bahareh and Rezania, Shahabaldin (2022) The effects of caffeine, gliclazide, and prazosin on the performance and microbial diversity in an up-flow anaerobic sludge blanket (UASB) reactor. Biomass and Bioenergy, 163 (NA). pp. 1-8. ISSN 0961-9534

Azizan, Nur Alyaa Zahida and Kamyab, Hesam and Yuzir, Ali and Abdullah, Norhayati and Vasseghian, Yasser and Ali, Ismat H. and Elboughdiri, Noureddine and Sohrabi, Mohsen (2022) The selectivity of electron acceptors for the removal of caffeine, gliclazide, and prazosin in an up-flow anaerobic sludge blanket (UASB) reactor. Chemosphere, 303 (NA). pp. 1-7. ISSN 0045-6535

Azizan, Nur Alyaa Zahida and Yuzir, Ali and Abdullah, Norhayati (2021) Pharmaceutical compounds in anaerobic digestion: A review on the removals and effect to the process performance. Journal of Environmental Chemical Engineering, 9 (5). pp. 1-12. ISSN 2213-3437

Azizan, Nur Alyaa Zahida and Yuzir, Ali and Abdullah, Norhayati and Al-Qaim, Fouad Fadhil (2021) Can anaerobic intermediate stages affect the biotransformation and sorption of pharmaceutical compounds? Desalination and Water Treatment, 222 . pp. 313-321. ISSN 1944-3994

Azlan, Nurul Azreen (2020) The Hashtag Game: Disrupting dissent during the Bersih 4 protest. Asiascape: Digital Asia, 7 (1-2). pp. 69-87. ISSN 2214-2304

Azman, N. F. and Abdeshahian, P. and Al Shorgani, N. K. N. and Hamid, A. A. and Kalil, M. S. (2016) Production of hydrogen energy from dilute acid-hydrolyzed palm oil mill effluent in dark fermentation using an empirical model. International Journal of Hydrogen Energy, 41 (37). pp. 16373-16384. ISSN 0360-3199

Azman, N. F. and Abdeshahian, P. and Kadier, A. and Shukor, H. and Al Shorgani, N. K. N. and Hamid, A. A. and Kalil, M. S. (2016) Utilization of palm kernel cake as a renewable feedstock for fermentative hydrogen production. Renewable Energy, 93 . pp. 700-708. ISSN 0960-1481

Azman, N. F. and Yamauchi, M. and Yamada, M. and Ikeda, S. and Yamaguchi, T. and Yagi, F. and Hara, H. (2020) Utilization of distillation waste of sweet potato shochu lees for lentinula edodes cultivation. Journal of Material Cycles and Waste Management, 21 (2). pp. 336-344. ISSN 1438-4957

Azman Shah, S. M. S. and Haron, H. N. and Mahrin, M. N. (2021) The trend of big data in workforce frameworks and occupational standards towards an educational intelligent economy. Journal of Technical Education and Training, 13 (1). ISSN 2229-8932

Azmi, M. Z. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Zakuan, F. R. A. and Zulkepli, K. A. and Ismail, N. H. F. and Zakariya, M. S. (2017) Steering intervention strategy for side lane collision Avoidance. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4265-4269. ISSN 1819-6608

Azmi, N. S. and Ahmad, R. and Ibrahim, R. (2016) Fluorescent light (FL), red LED and blue LED spectrums effects on in vitro shoots multiplication. Jurnal Teknologi, 78 (6-6). pp. 93-97. ISSN 0127-9696

Azzeri, M. N. and Adnan, Faizul Amri and Md. Zain, Mohd. Zarhamdy (2015) Review of course keeping control system for unmanned surface vehicle. Jurnal Teknologi, 74 (5). pp. 11-20. ISSN 0127-9696

Babar, Z. and Mohd. Izhar, Mohd. Azri and Nguyen, H. and Botsinis, Panagiotis and Alanis, D. and Chandra, D. and Ng, S. and Maunder, R. and Hanzo, L. (2018) Unary-coded dimming control improves ON-OFF keying visible light communication. IEEE Transactions on Communications, 66 (1). pp. 255-264. ISSN 0090-6778

Bae, Sunyoung and Zaini, Nabilah and Nor Kamarudin, Khairul Sozana and Yoo, Kye Sang and Kim, Jinsoo and Othman, Mohd. Roslee (2018) Rapid solvothermal synthesis of microporous UiO-66 particles for carbon dioxide capture. Korean Journal of Chemical Engineering, 35 (3). pp. 764-769. ISSN 0256-1115

Baeuo, M. O. M. and Ab. Rahim, N. Z. B. and Alaraibi, A. A. M. (2017) Technology factors influencing e-government readiness. Journal of Theoretical and Applied Information Technology, 95 (8). pp. 1637-1645. ISSN 1992-8645

Baguda, Yakubu S. and Fisal, Norsheila and Syed, Sharifah Hafizah and Yusof, Sharifah Kamilah and Abdullah, Mohd. S. and Mohd., Alias and Zulkarmawan, Abubakar (2009) Mobile streaming of H.264 video over gilbert - elliotts channel. World Academy of Science, Engineering and Technology, 24 . pp. 937-940. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Bahador, Abdollah and Issariyapat, Ammarueda and Umeda, Junko and Yamanoglu, Ridvan and Pruncu, Catalin and Amrin, Astuty and Kondoh, Katsuyoshi (2021) Strength–ductility balance of powder metallurgy Ti–2Fe–2W alloy extruded at high-temperature. Journal of Materials Research and Technology, 14 (NA). pp. 677-691. ISSN 2238-7854

Baharom, Mohammad Haniff and Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida (2021) Building information modelling (Bim): Contractual issues of intellectual property rights (ipr) in construction projects. International Journal of Sustainable Construction Engineering and Technology, 12 (1). pp. 170-178. ISSN 2180-3242

Baharudin, Izzaty Syahirah and Mohamed Noor, Noraini and Abdullah, Ezzat Chan and Othman, Raihan and Mujawar, Mubarak Nasibab (2022) Magnetically modified sugarcane bagasse disordered carbon as a cadmium removal agent in water. IIUM Engineering Journal, 23 (1). pp. 294-309. ISSN 1511-788X

Baharudin, N. A. and Fujikawa, C. and Mitomi, O. and Suzuki, A. and Taguchi, S. and Mikami, O. and Ambran, S. (2017) Tapered spot size converter by mask-transfer self-written technology for optical interconnection. IEEE Photonics Technology Letters, 29 (12). pp. 949-951. ISSN 1041-1135

Baharudin, Nurul Atiqah and Fujikawa, Chiemi and Mikami, Osamu and Idrus, Sevia M. and Ambran, Sumiaty (2019) UV-curable resin microlenses on optical pillars for optical interconnect. Japanese Journal of Applied Physics, 58 (SJ). SJJB02-SJJB02. ISSN 0021-4922

Baharun, Sabariah and Wan Daud, Wan Asma Awatif and Mohd. Yusof, Mohd. Rashid and Maan, Normah (2015) Application of graph theory on the relationship of the parameters affecting the dioxin furan emission in incineration process. Advance in Mathematics and Statistical Sciences . pp. 357-365.

Bahiuddin, Bahiuddin and Mazlan, S. A. and Shapiai, Shapiai and Imaduddin, F. and Ubaidillah, Ubaidillah and Choi, Seung Bok (2018) Constitutive models of magnetorheological fluids having temperature-dependent prediction parameter. Smart Materials and Structures, 27 (9). ISSN 0964-1726

Bahiuddin, I. and Fatah, A. Y. A. and Mazlan, S. A. and Shapiai, M. I. and Imaduddin, F. and Ubaidillah, Ubaidillah and Utami, D. and Muhtazaruddin, M. N. (2019) Comparing the linear and logarithm normalized extreme learning machine in flow curve modeling of magnetorheological fluid. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1065-1072. ISSN 2502-4752

Bahiuddin, I. and Imaduddin, F. and Mazlan, S. A. and Shapiai, M. I. and Ubaidillah, U. and Nazmi, N. and Mohamad, N. (2021) A machine learning approach to estimate magnetorheological suspension composition based on magnetic field dependent-rheological properties. Smart Materials and Structures, 30 (10). ISSN 0964-1726

Bahiuddin, I. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah (2017) A new control-oriented transient model of variable geometry turbocharger. Energy, 125 . pp. 297-312. ISSN 0360-5442

Bahiuddin, I. and Wibowo, S. B. and Syairaji, M. and Putra, J. T. and Pandito, C. A. and Maulana, A. F. and Prastica, R. M. S. and Nazmi, N. (2021) A systematic approach to predict the behavior of cough droplets using feedforward neural networks method. Fluids, 6 (2). ISSN 2311-5521

Bahiuddin, Irfan and Imaduddin, Fitrian and Mazlan, Saiful Amri and Ariff, Mohd. H. M. and Mohmad, Khairunnisa and Ubaidillah, Ubaidillah and Choi, Seung-Bok (2021) Accurate and fast estimation for field-dependent nonlinear damping force of meandering valve-based magnetorheological damper using extreme learning machine method. Sensors and Actuators, A: Physical, 318 . p. 112479. ISSN 0924-4247

Bahiuddin, Irfan and Mazlan, Saiful A. and Shapiai, Mohd. I. and Nordin, Nur A. and Imaduddin, Fitrian and Ubaidillah, Ubaidillah and Nordin, Nur Azmah and Adiputra, Dimas (2020) Field dependent-shear stress prediction of magnetorheological fluid using an optimum extreme learning machine model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 89-96. ISSN 2289-7879

Bahiuddin, Irfan and Mazlan, Saiful Amri and Imaduddin, Fitrian and oYamasaki, Nobuhik and Yamasaki, Nobuhiko and Ubaidillah, Ubaidillah (2021) A transient model of a variable geometry turbocharger turbine using a passive actuator. Arabian Journal for Science and Engineering, 46 (3). pp. 2565-2577. ISSN 2193-567X

Bahrain, S. H. K. and Mahmud, J. and Rasid, Z. A. and Madete, J. (2017) Synthesization and microstructural analysis of Arenga pinnata fibres and silicone rubber for new silicone biocomposite material. Journal of Mechanical Engineering, SI 4 (4). pp. 15-30. ISSN 1823-5514

Bakar, N. A. A. and Deraman, Zakaria and Tarmiji, Mohamad Fadzli and Yusoff, Rohani and Kama, N. (2020) Workplace digitalization in public sector organization towards operational effectiveness: Current landscape, issues and challenges. International Journal of Innovation in Enetrprise System, 4 (1). pp. 78-83. ISSN 2580-3050

Bakar, N. A. A. and Harihodin, S. and Kama, N. (2017) A priority based enterprise architecture implementation assessment model: an analytic hierarchy process (AHP) approach. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 121-125. ISSN 2180-1843

Bakar, N. A. A. and Ramli, W. M. W. and Hassan, N. H. (2019) The internet of things in healthcare: an overview, challenges and model plan for security risks management process. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 414-420. ISSN 2502-4752

Bakar, N. H. A. and Jusoh, A. and Ahmad, M. F. and Noor, M. J. M. M. and Norzilah, A. (2016) A spatial nutrient distribution due to seabass aquaculture activities at Setiu, Terengganu, Malaysia. Journal of Fisheries and Aquatic Science, 11 (5). pp. 332-348. ISSN 1816-4927

Baker, A. M. A. and Alam, M. S. and Tanrioven, M. and Ahmad, H. B. (2005) Electromagnetic compatibility analysis in buildings affected by lightning strike. Electric Power Systems Research, 73 . pp. 197-204. ISSN 03787796

Bakhary, NorHisham and Hao, Hong and Deeks, Andrew J. (2010) Structure damage detection using neural network with multi-stage substructuring. Advances in Structural Engineering, 13 (1). pp. 1-16. ISSN 1369-4332

Bakhtiari, Majid and Zainal, Anazida and Bakhtiari, Saeid and Mammi, Hazinah Kutty (2015) Lightweight symmetric encryption algorithm in big data. International Journal of Advances in Soft Computing and its Applications, 7 (SI3). pp. 45-55. ISSN 2074-8523

Balaraman, Perumal and Balasubramanian, Balamuralikrishnan and Liu, Wen-Chao and Kaliannan, Durairaj and Durai, Mahendran and Kamyab, Hesam and Alwetaishi, Mamdooh and Maluventhen, Viji and Ashokkumar, Veeramuthu and Chelliapan, Shreeshivadasan and Maruthupandian, Arumugam (2022) Sargassum myriocystum-mediated TiO2-nanoparticles and their antimicrobial, larvicidal activities and enhanced photocatalytic degradation of various dyes. Environmental Research, 204 (NA). pp. 1-13. ISSN 0013-9351

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir (2018) "New residential construction building and composite post and beam structure toward global warming mitigation". Environmental Progress & Sustainable Energy, 37 (4). pp. 1394-1402. ISSN 1944-7442

Balasundram, Vekes and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Catalytic upgrading of biomass-derived pyrolysis vapour over metal-modified HZSM-5 into BTX: a comprehensive review. Biomass Conversion and Biorefinery . p. 28. ISSN 2190-6815

Balasundram, Vekes and Kamarul Zaman, Khairunnisa and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Optimizing the catalytic performance of Ni-Ce/HZSM-5 catalyst for enriched C6–C8 hydrocarbons in pyrolysis oil via response surface methodology. Biomass Conversion and Biorefinery . ISSN 2190-6815

Balasundram, Vekes and Kamarul Zaman, Khairunnisa and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Thermogravimetric kinetics of catalytic pyrolysis of sugarcane bagasse over nickel-cerium/HZSM-5 catalyst. Journal of Advanced Research in Materials Science, 64 (1). pp. 1-17. ISSN 2289-7992

Balavandy, Sepideh Keshan and Shameli, Kamyar and Abidin, Z. Z. (2015) Rapid and green synthesis of silver nanoparticles via sodium alginate media. International Journal of Electrochemical Science, 10 (1). pp. 486-497. ISSN 1452-3981

Bamidele, Ameen Aliu and Kamardin, Kamilia and Abd. Aziz, Nur Syazarin Natasha and Mohd. Sam, Suriani and Ahmed, Irfanuddin Shafi and Azizan, Azizul and Bani, Nurul Aini and Mad Kaidi, Hazilah (2019) Non-intrusive driver drowsiness detection based on face and eye tracking. International Journal of Advanced Computer Science and Applications, 10 (7). pp. 549-569. ISSN 2158-107X

Bani, N. A. (2017) Comparison of the performance of artificial neural networks and fuzzy logic for recognizing different partial discharge sources. Energies, 10 (7). ISSN 1996-1073

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Aris, S. A. M. and Jalil, S. Z. A. and Muhtazaruddin, M. N. and Kaidi, H. M. and Rahman, S. A. S. A. and Muhammad-Sukki, F. and Mas'Ud, A. A. and Abu-Bakar, S. H. and Rey, J. A. A. (2017) Frequency dependence of electroluminescence measurement in LDPE. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1406-1413. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Muhammad-Sukki, F. and Abubakar MasUd, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, Nurul Aini and Hassan, Mohamad Zaki and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil and Sarip, Shamsul and Saleh, Safiza and Mohd. Izhar, Mohd. Azri and Mohd. Aris, Siti Armiza and Abd. Jalil, Siti Zura and Mohamed Rashidi, Ahmad Hadi (2018) Feasibility study of a low cost saltwater lamp for rural area. International Journal of Integrated Engineering, 10 (7). pp. 167-176. ISSN 2229-838X

Baqutayan, S. M. and Mahdzir, A. M. and Yusof, N. A. M. and Saimy, I. S. and Salleh, S. H. (2021) Public opinions and gender issue. European Review for Medical and Pharmacological Sciences, 25 (16). pp. 5215-5227. ISSN 1128-3602

Baqutayan, Shadiya and Md. Salimun, Husni Alhan (2018) Evaluation on national biotechnology policy (NBP) 2005: Towards achieving 20 global companies in NBP phase III. Journal of Commercial Biotechnology, 24 (2). pp. 21-26. ISSN 1462-8732

Baqutayan, Shadiya Mohamed S. (2020) Women empowerment is needed to boost gender equality in Malaysia. Current Research Journal of Social Sciences and Humanities, 3 (1). pp. 96-108. ISSN 2581-8422

Baqutayan, Shadiya Mohamed S. and Abd. Razak, Rosesyafiqa Baiduri (2022) Can women in Malaysian be a changemakers? Political involvement and decision-making. International Journal of Academic Research in Business and Social Sciences, 12 (4). pp. 92-104. ISSN 2222 -6990

Baqutayan, Shadiya Mohamed S. and Abu Hassan, Mohammad Ariff and Asim @ Hashim, Asrida and Mohd. Zaini, Siti Runiza and Mohd. Salleh, Saiyidah (2021) Does domestic violence in Malaysia is increasing during the pandemic? Factors and policy-related. International Journal of Academic Research in Business and Social Sciences, 11 (8). pp. 579-592. ISSN 2222 -6990

Baradaran, H. and Ng., C. R. and Gupta, A. and Noor, N. M. and Al-Dasuqi, K. W. and Mtui, E. E. and Rijal, O. M. and Giannopoulos, A. and Nicolaides, A. and Laird, J. R. and Saba, L. and Suri, J. S. (2017) Extracranial internal carotid artery calcium volume measurement using computer tomography. International Angiology, 36 (5). pp. 445-461. ISSN 0392-9590

Basha, M. and Sidik, N. A. C. (2018) Numerical predictions of laminar and turbulent forced convection: Lattice Boltzmann simulations using parallel libraries. International Journal of Heat and Mass Transfer, 116 . pp. 715-724. ISSN 0017-9310

Bashardoost, M. and Mohd. Rahim, M. S. and Saba, T. and Rehman, A. (2017) Replacement attack: a new zero text watermarking attack. 3D Research, 8 (1). ISSN 2092-6731

Bashri, Ahmad Syukri and Che Amat, Rohayah (2022) Personality and walkability: predicting walking behaviour in urban settings using the higher order factors of the big five amongst Malaysian adults. International Journal of Built Environment and Sustainability,, 9 (1). pp. 99-105. ISSN 2289-8948

Bayat, Ali Esfandyari and Junin, Radzuan and Kharrat, Riyaz and Hejri, Shahab (2015) Evaluation of vapour extraction process and its prospect as an enhanced oil recovery method. International Journal of Oil, Gas and Coal Technology, 9 (4). pp. 394-421. ISSN 1753-3317

Bee, Soo Tueen and Hassan, Azman and Abu Bakar, Aznizam (2007) Mechanical properties of talc and calcium carbonate filled PVC. The Proceedings of Regional Annual Fundamental Science Seminar (RAFSS) 2007 . pp. 22-31.

Behrooz, Farinaz and Yusof, Rubiyah and Mariun, Norman and Khairuddin, Uswah and Ismail, Zool Hilmi (2019) Designing intelligent MIMO nonlinear controller based on fuzzy cognitive map method for energy reduction of the buildings. Energies, 12 (14). p. 2713. ISSN 1996-1073

Bekibayev, T. T. and Zhapbasbayev, U. K. and Ramazanova, G. I. and Minghat, A. D. and Bosinov, D. Zh. (2021) Simulation of oil pipeline shutdown and restart modes. Kompleksnoe Ispolzovanie Mineralnogo Syra (Complex Use of Mineral Resources), 316 (1). pp. 15-23. ISSN 2224-5243

Belarbi, Abdelillah Abed and Beriache, M'hamed and Che Sidik, Nor Azwadi and Mamat, Rizalman (2021) Experimental investigation on controlled cooling by coupling of thermoelectric and an air impinging jet for CPU. Heat Transfer, 50 (3). pp. 2242-2258. ISSN 2688-4534

Benk, Serkan and Budak, Tamer (2016) The impact of religiosity on tax compliance among Turkish self-employed taxpayers. Religions, 7 (4). ISSN 2077-1444

Beriache, M’hamed and Merzouk, Djelloul Saïh and Che Sidik, Nor Azwadi (2018) Assessing and quality tests of new PVC electrical cables outer sheath by accelerated thermal ageing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 73-84. ISSN 2289-7879

Besser, Katrin and Malyon, Graham P. and Eborall, William S. and Paro da Cunha, Giovanni and Filgueiras, Jefferson G. and Dowle, Adam and Garcia, Lourdes Cruz and Page, Samuel J. and Dupree, Ray and Kern, Marcelo and Gomez, Leonardo D. and Li, Yi and Elias, Luisa and Sabbadin, Federico and Mohamad, Shaza E. and Pesante, Giovanna and Steele-King, Clare and Ribeiro de Azevedo, Eduardo and Polikarpov, Igor and Dupree, Paul and Cragg, Simon M. and Bruce, Neil C. and McQueen-Mason, Simon J. (2018) Hemocyanin facilitates lignocellulose digestion by wood-boring marine crustaceans. Nature Communications, 9 (5125). pp. 1-14. ISSN 2041-1723

Bhatti, T. and Md Husin, M. (2019) An investigation of the effect of customer beliefs on the intention to participate in family takaful schemes. Journal of Islamic Marketing, 11 (3). pp. 709-727. ISSN 1759-0833

Bilyamin, Siti Fatimah Ilani and Wan Mohd. Rani, Wan Nurul Mardiah and Wahab, Mohammad Hussaini (2022) Achieving an active lifestyle within a walkable environment: Assessment of before and during the COVID-19 pandemic. International Journal of Built Environment and Sustainability, 9 (2-3). pp. 81-90. ISSN 2289–8948

Binhweel, Fozy and Ahmad, Mardiana Idayu and Shaikh Salim, Sheikh Ahmad Zaki (2022) Utilization of polymeric materials toward sustainable biodiesel industry: a recent review. Polymers, 14 (19). pp. 1-23. ISSN 2073-4360

Binwahlan, Mohammed Salem and Salim, Naomie and Suanmali, Ladda (2009) MMI diversity based text summarization. International Journal of Computer Science and Security, 3 (1). pp. 23-33. ISSN 1985-1553

Birima, A. H. and Ahmed, A. T. and Noor, M. J. M. M. and Sidek, L. M. and Muda, Z. C. and Wong, L. S. (2015) Application of salt extracted peanut seeds in the pretreatment of palm oil mill effluent (POME). Desalination and Water Treatment, 55 (8). pp. 2196-2200. ISSN 1944-3994

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) A fuzzy logic controller to line starting performance synchronous motor for a crane system using vector control. Jurnal Teknologi, 78 (6-6). pp. 81-86. ISSN 0127-9696

Bohari, Sharifah Norashikin and Saad, Siti Nor Maizah and Marzukhi, Faradina and Rahim, Ashnita and Ahmad Darim, Ainul Dzahira (1998) Residential property valuation using GIS. Buletin Geoinformasi, 1 (4).

Borhanuddin, N. N. and Mohammad, R. and Othman, N. and A. Kadir, Z. (2020) Attendance management system assessment and sustainability performance at a telecommunication operation centre in Malaysia. Journal of Environmental Treatment Techniques, 8 (1). pp. 471-480. ISSN 2309-1185

Borhanuddin, Nooramirah Najwa and Mohammad, Roslina and A. Kadir, Zuritah (2019) Improvement of attendance management system at a telecommunication operation centre in Malaysia. Open International Journal of Informatics, 7 (2). pp. 22-32. ISSN 2289-2370

Bouguerra, Khalid and Wah, Lim Yaik and Ali, Kherun Nita (2020) A preliminary implementation framework of building information modelling (BIM) in the Algerian AEC industry. International Journal of Built Environment and Sustainability, 7 (3). pp. 59-68. ISSN 2289-8948

Bruun, Esben Wilson and Hauggaard-Nielsen, Henrik and Ibrahim, Norazana and Egsgaard, Helge and Ambus, Per Lennart and Jensen, Peter Arendt and Kim, Dam-Johansen (2011) Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil. Biomass and Bioenergy, 35 (3). pp. 1182-1189. ISSN 0961-9534

Bukhori, I. and Ismail, Z. H. (2017) Detection of kidnapped robot problem in Monte Carlo localization based on the natural displacement of the robot. International Journal of Advanced Robotic Systems, 14 (4). pp. 1-6. ISSN 1729-8806

Bukhori, I. and Ismail, Z. H. (2017) Performance comparisons of particle-based and similarity measure-based kidnapping detectors in Monte Carlo localization. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2536-2542. ISSN 0975-1033

Buniya, M. K. and Othman, I. and Sunindijo, R. Y. and Kashwani, G. and Durdyev, S. and Ismail, S. and Afari, M. F. A. and Li, H. (2021) Critical success factors of safety program implementation in construction projects in Iraq. International Journal of Environmental Research and Public Health, 18 (16). ISSN 1661-7827

Buniya, Mohanad Kamil and Othman, Idris and Durdyev, Serdar and Sunindijo, Riza Yosia and Ismail, Syuhaida and Kineber, Ahmed Farouk (2021) Safety program elements in the construction industry: The case of Iraq. International Journal of Environmental Research and Public Health, 18 (2). pp. 1-13. ISSN 1661-7827

Buntoro, Ghulam Asrofi and Arifin, Rizal and Syaifuddiin, Gus Nanang and Selamat, Ali and Krejcar, Ondrej and Fujita, Hamido (2021) Implementation of a machine learning algorithm for sentiment analysis of Indonesia‘s 2019 Presidential election. IIUM Engineering Journal, 22 (1). pp. 78-92. ISSN 1511-788X

Burhannuddin, Nurul Liyana and Nordin, Nur Azmah and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Choi, Seung Bok and Kuwano, Noriyuki and Nazmi, Nurhazimah and Johari, Norhasnidawani (2020) Effects of corrosion rate of the magnetic particles on the field-dependent material characteristics of silicone based magnetorheological elastomers. Smart Materials and Structures, 29 (8). pp. 1-15. ISSN 0964-1726

Burhannuddin, Nurul Liyana and Nordin, Nur Azmah and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Kuwano, Noriyuki and Mohd. Jamari, Siti Khumaira and Ubaidillah, Ubaidillah (2021) Physicochemical characterization and rheological properties of magnetic elastomers containing different shapes of corroded carbonyl iron particles. Scientific Reports, 11 (1). p. 868. ISSN 2045-2322

Burhanuddin, M. A. and Ahmad, A. R. and Desa, Mohammad Ishak (2007) Maintenance decision making model using multiple criteria analysis for small medium industries. Jurnal Teknologi Maklumat, 19 (2). pp. 35-46. ISSN 0128-3790

Busalim, Abdelsalam H. and Masrom, Maslin and Wan Zakaria, Wan Normeza Binti (2019) The impact of facebook addiction and self-esteem on students academic performance: a multi-group analysis. Computers and Education, 142 . pp. 1-14. ISSN 0360-1315

Butt, S. and Ramakrishnan, S. and Chohan, M. A. and Punshi, S. K. (2019) Prediction of Malaysian exchange rate using microstructure fundamental and commodities prices: a machine learning method. International Journal of Recent Technology and Engineering, 8 (2). pp. 987-993. ISSN 2277-3878

Butt, Shamaila and Ramakrishnan, Suresh and Loganathan, Nanthakumar and Chohan, Muhammad Ali (2020) Evaluating the exchange rate and commodity price nexus in Malaysia: evidence from the threshold cointegration approach. Financial Innovation, 6 (1). p. 22. ISSN 2199-4730

Caccetta, Louis and Nordin, Syarifah Zyurina (2013) Mixed integer programming model for scheduling in unrelated parallel processor system with priority consideration. Numerical Algebra, Control and Optimization (NACO) . ISSN 2155-3297

Campbell, Grant M and Fang, Chaoying and Muhammad, Ida Idayu (2007) On predicting roller milling performance V1. effect of kernel hardness and shape on the particle size distribution from first break milling of wheat. IChemE Journal: Food and Products Processing, 85 . pp. 7-23. ISSN 0960-3085

Cazaux, Jacques and Kuwano, Noriyuki and Sato, Kaoru (2013) Backscattered electron imaging at low emerging angles: a physical approach to contrast in LVSEM. Ultramicroscopy, 135 . pp. 43-49. ISSN 0304-3991

Chaabane, Raoudha and Che Sidik, Nor Azwadi and Jemni, Abdelmajid (2021) Convective Boundary Conditions Effect on Cylindrical Media with Transient Heat Transfer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (2). pp. 146-156. ISSN 2289-7879

Chaeikar, Saman Shojae and Zamani, Mazdak and Abdul Manaf, Azizah and M. Zeki, Akram (2018) PSW statistical LSB image steganalysis. Multimedia Tools and Applications, 77 (1). pp. 805-835. ISSN 1380-7501

Chai, Khin Chung and Abu Bakar, Nooh (2001) The Relevancy Of Just-In-Time (JIT) Concept In Government Purchasing. Jurnal Teknololgi A, 35 (A). pp. 1-8. ISSN 0127-9696

Chan, Kar Fei and Mohd. Zaid, Mohd. Hafiz and Mamat, Md. Shuhazlly and Shahira Liza, Shahira Liza and Tanemura, Masaki and Yaakob, Yazid (2021) Recent developments in carbon nanotubes-reinforced ceramic matrix composites: A review on dispersion and densification techniques. Crystals, 11 (5). p. 457. ISSN 2073-4352

Chan, Kar Fei and Mohd. Zaid, Mohd. Hafiz and Shahira Liza, Shahira Liza and Matori, Khamirul Amin and Mamat, Md. Shuhazlly and Hazan, Mohammad Adib and Yaakob, Yazid (2020) Effect of CNT on microstructural properties of Zn2SiO4/CNT composite via dry powder processing. Materials Research Express, 7 (10). p. 105601. ISSN 2053-1591

Chan Hong Kit, P. and Abdul Rasid, S. Z. and Md. Husin, M. (2016) The impacts of Malaysian managed care on doctor-patient relationships, ethical practice of medicine, and quality of care: a study on primary care physicians’ perception. International Journal of Healthcare Management, 9 (2). pp. 119-126. ISSN 2047-9700

Chang, Siu Hua and Yaacob, Zulkefli and Mohsin, Rahmat (2007) Effect of various manifold absolute pressures and air flowrates on throttle body injection mixer in compressed natural gas motorcycle. Journal of Chemical and Natural Resources Engineering, 1 . pp. 40-49. ISSN 1823-5255

Che Amat, Rohayah (2018) Inheriting the city: Historic urban landscape of George Town UNESCO World Heritage Site. Planning Malaysia, 16 (1). pp. 205-210. ISSN 1675-6215

Che Aron, Zamree and Hassan Abdalla, Aisha and Abdullah, Khaizuran and Hassan, Wan Haslina and Rahman, Md. Arafatur (2015) Performance evaluation of joint path and spectrum diversity based routing protocol in Cognitive Radio Ad Hoc Networks under critical conditions. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 694-700. ISSN 2040-7459

Che Awang, Mohamad Saupi and Daud, Abdullah (1994) Keperluan Pengeluaran Almanak * Falak Syarie Kebangsaan. Buletin Ukur, 5 (1). pp. 36-41. ISSN 0128-4274

Che Daud, Zul-Hilmi and Abdul Hamid, Mohd. Kameil and Mohd. Hassan, Fakhruddin and Mazali, Izhari Izmi and Ardani, Mohd. Ibthisham and Asus, Zainab (2021) Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790

Che Husin, S. M. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Implementing sustainability in existing building through retrofitting measures. International Journal of Civil Engineering and Technology, 10 (1). pp. 1450-1471. ISSN 0976-6308

Che Ismail, Elna Herawati and Othman, Nooraini (2015) Psychological approach in managing muscular dystrophy patients in Malaysia. Iranian Journal of Public Health, 44 (3). pp. 418-419. ISSN 0304-4556

Che Razali, Che Munira and Abdullah, Shahrum Shah and Parnianifard, Amir and Faruq, Amrul (2020) Adaptive infill sampling strategy for metamodeling: Challenge and future research directions. Bulletin of Electrical Engineering and Informatics, 9 (5). pp. 2020-2029. ISSN 2089-3191

Che Sidik, Nor Azwadi (2007) The development of thermal lattice Boltzmann models in incompressible limit. The development of thermal lattice Boltzmann models in incompressible limit, 3 (2). pp. 193-202.

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Two-phase flow simulation with lattice Boltzmann method. Jurnal Mekanikal (24). pp. 68-79. ISSN 0127-3396

Che Sidik, N. A. and Kianpour, E. (2019) Effects of row trench holes geometries on an endwall cooling. CFD Letters, 11 (6). pp. 27-38. ISSN 2180-1363

Che Sidik, N. A. and Mahmud Jamil, M. and Aziz Japar, W. M. A. and Muhammad Adamu, I. (2017) A review on preparation methods, stability and applications of hybrid nanofluids. Renewable and Sustainable Energy Reviews, 80 . pp. 1112-1122. ISSN 1364-0321

Che Sidik, Nor Azwadi and Kean, Tung Hao and Chow, Hoong Kee and Rajaandra, Aravinthan and Rahman, Shiblur and Kaur, Jesbains (2018) Performance enhancement of cold thermal energy storage system using nanofluid phase change materials: A review. International Communications in Heat and Mass Transfer, 94 . pp. 85-95. ISSN 0735-1933

Che Sidik, Nor Azwadi and Ng, Chee Horng (2009) Lattice boltzmann modelling of microchannel flow. Journal of Materials Science and Engineering, 3 (12).

Che Sidik, Nor Azwadi and Samion, Syahrullail (2009) Lattice Boltzman numerical prediction of flow behavior downstream of cylinder blockage at various Reynolds numbers. World Academy of Science, Engineering and Technology, 26 . pp. 7-11. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2006) Simplified thermal lattice boltzmann in incompressible limit. International Journal of Modern Physics B, 20 (17). pp. 2437-2449. ISSN 0217-9792

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Three-dimensional thermal lattice boltzman simulation of natural convection in a cubic cavity. International Journal of Modern Physics B, 21 . pp. 87-96. ISSN 0217-9792

Che Wil, Norfatmazura and Othman, Nooraini (2022) Application Of Islamic counselling and Adler counselling model in dealing with mental health issues. Al-Qanatir: International Journal of Islamic Studies, 27 (2). pp. 126-135. ISSN 2289-9944

Che Wil, Norfatmazura and Othman, Nooraini (2022) Application of Islamic counselling and Adler individual counselling model in dealing with mental health issues. International Journal of Academic Research in Business and Social Sciences, 11 (11). pp. 1161-1171. ISSN 2222-6990

Che Wil, Norfatmazura and Othman, Nooraini (2022) Individual and spiritual factors contributing to the social and mental health problems of adolescents in Malaysia. Global Journal Al-Thaqafah (GJAT), NA (SI). pp. 11-22. ISSN 2232-0474

Che Yob, Rashidah and Seman, Norhudah (2015) An accurate operation of wideband multi-port reflectometer with new calibration method implementing least mean square for microwave imaging application. Jurnal Teknologi, 73 (3). pp. 119-125. ISSN 2180–3722

Che Yunus, Mohd Azizi and Ripin, Adnan (2001) Optimization of processing parameter for enhancing good quality of mango powder using response surface methodology. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 427-434.

Chee, Zhou Kam and Beng, Ahmad Hong Kueh (2015) Towards sustainable polymeric materials: zero waste, green and self-healing. Jurnal Teknologi, 74 (4). pp. 159-163. ISSN 0127-9696

Chelliapan, Shreeshivadasan and Sallis, Paul J. (2015) Anaerobic treatment of high sulphate containing pharmaceutical wastewater. Journal of Scientific and Industrial Research, 74 (9). pp. 526-530. ISSN 0022-4456

Chelliapan, Shreeshivadasan and Wilby, T. and Sallis, P. J. and Muhammad Yuzir, Muhamad Ali (2011) Tolerance of the antibiotic tylosin on treatment performance of an up-flow anaerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chieng, Yu Yuan and Kamarudin, Khairul Sozana Nor and Hamdan, Halimaton and Mat, Hanapi (2004) Gas adsorption capacity of metal oxide modified zeolite adsorbents. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-121.

Chin, Hon Huin and Varbanov, Petar Sabev (2021) Enhanced Cascade Table Analysis to target and design multi-constraint resource conservation network. Computers and Chemical Engineering, 148 . p. 107262. ISSN 0098-1354

Chin, Hon Huin and Varbanov, Petar Sabev and Liew, Peng Yen and Klemeš, Jirí Jaromír (2021) Pinch-based targeting methodology for multi-contaminant material recycle/reuse. Chemical Engineering Science, 230 . p. 116129. ISSN 0009-2509

Ching, Yee Yong and Sudirman, Rubita and Kim, Mey Chew (2019) Position and shape estimation using double integration of acceleration. e-Bangi, 16 (3). pp. 1-10. ISSN 1823-884x

Chiong, Meng Soon and Rajoo, Srithar and Romagnoli, Alessandro and Costall, Aaron W. and Martinez-Bota, Ricardo (2015) Non-adiabatic pressure loss boundary condition for modelling turbocharger turbine pulsating flow. Energy Conversion and Magement, 93 . pp. 267-281. ISSN 0196-8904

Chiu, Po Chan and Selamat, Ali and Krejcar, Ondrej and Kuok, King Kuok and Abdul Bujang, Siti Dianah and Fujita, Hamido (2022) Missing value imputation designs and methods of nature-inspired metaheuristic techniques: A systematic review. IEEE Access, 10 (NA). pp. 61544-61566. ISSN 2169-3536

Chiu, Po Chan and Selamat, Ali and Krejcar, Ondrej and Kuok Kuok, King and Enrique, Herrera-Viedma and Fenza, Giuseppe (2021) Imputation of rainfall data using the sine cosine function fitting neural network. International Journal of Interactive Multimedia and Artificial Intelligence, 6 (7). pp. 39-48. ISSN 1989-1660

Chong, Wai Liew and Md. Illias, Rosli and Mahadi, Nor Muhammad and Najimudin, Nazalan (2007) Expression of the Na+/H+ antiporter gene (g1-nhaC) of alkaliphilic bacillus sp. G1 in escherichia coli. FEMS Microbiology Letters, 276 . pp. 114-122.

Chong, K. C. and Lai, S. O. and Lau, W. J. and Thiam, H. S. and Ismail, A. F. and Zulhairun, A. K. (2017) Fabrication and characterization of polysulfone membranes coated with polydimethysiloxane for oxygen enrichment. Aerosol and Air Quality Research, 17 (11). pp. 2735-2742. ISSN 1680-8584

Chong, Mei Mei and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny and Goto, Masafumi and Sethupathi, Sumathi (2020) Potential of functionalised cellulose from oil palm biomass as nitrogen and phosphorus based nutrient adsorbent – A review. Journal Of Oil Palm Research . ISSN 1511-2780

Chong, Mei Mei and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny and Goto, Masafumi and Sethupathi, Sumathi (2021) Potential of functionalised cellulose from oil palm biomass as nitrogen and phosphorus-based nutrient adsorbent - A review. Journal of Oil Palm Research, 33 (3). pp. 387-399. ISSN 1511-2780

Chong, S. C. and Wong, Kuan Yew and Lin, B. S. (2006) Criteria for measuring KM performance outcomes in organisations. Industrial Management & Data Systems, 106 (7). pp. 917-936. ISSN 0263-5577

Chong, Siaw Yah and Kassim, K. A. and Chiet, Kenny Tiong Ping and Tan, Choy Soon (2015) Static response on lime column and geotextile encapsulated lime column (GELC) stabilised marine clay under vertical load. Jurnal Teknologi, 77 (11). pp. 25-34. ISSN 0127-9696

Choo, H. S. and Ooi, C. Y. and Inoue, M. and Ismail, N. and Kok, C. H. (2019) Review of machine learning based hardware Trojan detection methods. Defence S and T Technical Bulletin, 13 (1). pp. 1-21. ISSN 1985-6571

Choo, Hau Sim and Ooi, Chia Yee and Inoue, Michiko and Ismail, Nordinah and Moghbel, Mehrdad and Kok, Chee Hoo (2020) Register-transfer-level features for machine-learning-based hardware trojan detection. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E103 (2). 502A-509. ISSN 0916-8508

Choong, Thomas S.Y. and Sutrasno, K. and Saidi, Hamdani and Abdul Aziz, Ramlan and Idrees, M. (1994) Analysis of temperature changes in membrane gas separation - A theoretical investigation. Buletin FKKKSA, 8 (2). pp. 15-19. ISSN 0128-0740

Choong, Thomas S.Y. and Abdul Aziz, Ramlan and Idrees, M and Saidi, Hamdani (1995) Modelling and analysis of a retentate-permeate recycle gas permeator. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A4-1.

Chow, M. H. and Jamil, M. M. and Ros, F. C. and Yuzir, M. A. M. and Hossain, M. S. (2019) Evaluation of parameter regionalization methods for flood simulations in Kelantan river basin. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 313-318. ISSN 2278-3075

Chowdhury, Md. Najmul Kabir and Ismail, Ahmad Fauzi and HossenBeg, Mohammad Dalour and Rahman Khan, Maksudur and Gohari, Rasoul Jamshidi and Saidin, Mohammad Abdul Razis and Islam, Muhammad Remanul and Ong, Huei Ruey (2016) Control of biodegradability in a natural fibre based nanocomposite as a function of impregnated copper nanoparticles. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069

Chowdhury, Tamal and Hasan, Samiul and Chowdhury, Hemal and Abul Hasnat, Abul Hasnat and Ahmad Rashedi, Ahmad Rashedi and Asyraf, M. R. M. and Hassan, Mohamad Zaki and M. Sait, Sadiq (2022) Sizing of an island standalone hybrid system considering economic and environmental parameters: A case study. Energies, 15 (16). pp. 1-22. ISSN 1996-1073

Chua, Lee Suan and Sarmidi, Mohamad Roji (2005) Enzymatic enantioselective acylation of sterically aromatic secondary alcohol. Developments in Chemical Engineering and Mineral Processing, 13 (5/6). pp. 605-616. ISSN 1969-1855

Chua, Lee Suan and Sarmidi, Mohamad Roji (2004) Immobilised lipase-catalysed resolution of (R,S)-1-phenylethanol in recirculated packed bed reactor. Journal of Molecular Catalysis B: Enzymatic, 28 . pp. 111-119. ISSN 1381-1177

Chua, S. Y. and Periasamy, L. A. and Goh, C. M. H. and Tan, Y. H. and Mubarak, N. M. and Kansedo, J. and Khalid, M. and Walvekar, R. and Abdullah, E. C. (2020) Biodiesel synthesis using natural solid catalyst derived from biomass waste a review. Journal of Industrial and Engineering Chemistry, 81 . pp. 41-60. ISSN 1226-086X

Chuan, Kua Hock and Bidin, Noriah (2004) Elasticity measurement using holographic interferometry double exposure technique. Jurnal Teknologi, 41 . pp. 55-64.

Chuprat, Suriayati and Mahrin, Mohd. Naz’ri and Anuar, Syahid and Ariffin, Aswami and Abd. Aziz, Fakhrul Afiq and Ahmad Darus, Muhammad Zaharudin and Adil Talib, Mohd. Zabri (2018) Malware prediction techniques: selection and implementation for integrated cyber evidence. IJCSNS International Journal of Computer Science and Network Security, 18 (8). pp. 19-27. ISSN 1738-7906

Chwan, Dominic Yee Foo and Abdul Manan, Zainuddin and Yin, Ling Tan (2005) Synthesis of maximum water recovery network for batch process systems. Journal of Cleaner Production, 13 . pp. 1381-1394. ISSN 0959-6526

Chwan, YeeFoo and Abdul Manan, Zainuddin and Mohd Yunus, Rosli and Abdul Aziz, Ramlan (2005) Synthesis of mass exchange network for batch processes - part II: minimum units target and batch network design. Chemical Engineering Science, 60 . pp. 1349-1362. ISSN 0009-2509

Colenbrander, Sarah and Gouldson, Andy and Sudmant, Andrew Heshedahl and Papargyropoulou, Effie (2015) The economic case for low-carbon development in rapidly growing developing world cities: A case study of Palembang, Indonesia. Energy Policy, 80 . pp. 24-35. ISSN 0301-4215

Colomb, Robert Micheal and Ahmad, Mohammad Nazir (2007) Merging ontologies requires interlocking instituitional worlds. Applied Ontology, 2 (1). pp. 1-12. ISSN 1570-5838

Colomb, Robert M. and Dampney, C. N. G. (2005) An approach to ontology for institutional facts in the semantic web. Information and Software Technology Volume, 47 . pp. 775-783. ISSN 09505849

Cong, Cheng Eng and Velautham, Sanjayan and Darus, Amer Nordin (2005) Solar thermal organic rankine cycle as a Renewable energy option. Solar thermal organic rankine cycle as a (20). pp. 68-77.

Dadkhah, Sajjad and Abdul Manaf, Azizah and Sadeghi, Somayeh (2012) Efficient digital image authentication and tamper localization technique using 3LSB watermarking. IJCSI - International Journal of Computer Science, 9 (1). pp. 1-8. ISSN 1694-0814

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shar (2009) Development of a computer program for rocket aerodynmic coefficients estimation. Jurnal Mekanikal, 28 . pp. 28-43. ISSN 0127-3396

Damayanti, A. and Salim, Mohd. Razman and Ujang, Zaini (2009) Finding of coefficients and oxidizable nitrogen from palm oil mill effluent (POME) for activated sludge models(ASMs). Malaysian Journal of Civil Engineering, 21 (1). pp. 32-41. ISSN 1823-7843

Damiati, S. A. and Zaki, S. A. and Rijal, H. B. and Wonorahardjo, S. (2016) Field study on adaptive thermal comfort in office buildings in Malaysia, Indonesia, Singapore, and Japan during hot and humid season. Building and Environment, 109 . pp. 208-223. ISSN 0360-1323

Daradkeh, Yousef Ibrahim and Tvoroshenko, Iryna and Gorokhovatskyi, Volodymyr and Abdul Latiff, Liza and Ahmad, Norulhusna (2021) Development of effective methods for structural image recognition using the principles of data granulation and apparatus of fuzzy logic. IEEE Access, 9 . pp. 13417-13428. ISSN 2169-3536

Darajeh, N. and Fard Masoumi, H. R. and Kalantari, K. and Ahmad, M. B. and Shameli, K. and Basri, M. and Khandanlou, R. (2016) Optimization of process parameters for rapid adsorption of Pb(II), Ni(II), and Cu(II) by magnetic/talc nanocomposite using wavelet neural network. Research on Chemical Intermediates, 42 (3). pp. 1977-1987. ISSN 0922-6168

Darameicikas, M. and Muhammad Sukki, F. and Abu Bakar, S. H. and Sellami, N. and Bani, N. A. and Muhtazaruddin, M. N. and Mas ud, A. A. and Ardila Rey, J. A. (2019) Improved design of a dc-dc converter in residential solar photovoltaic system. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1476-1482. ISSN 2088-8694

Darvishi, Zeinab and Najafi, Gholamhassan and Ghobadian, Barat and Che Sidik, Nor Azwadi and Mamat, Rizalman and Ghazali, Mohd. Fairusham and Hoseini, Seyed Salar (2022) 3-Dimensional CFD simulation and experimental analysis on performance of a new diffuser and wind channel for a micro wind turbine. CFD Letters, 14 (6). pp. 1-16. ISSN 2180-1363

Das, S. and Toh, H. T. and Abu, A. H. and Das, S. and Mondal, K. and Sarkar, A. (2016) Flow in straight through labyrinth seal: a comparison of fluid structure interaction effects. Jurnal Teknologi, 78 (1). pp. 131-137. ISSN 0127-9696

Dasan, Yaleeni Kanna and Lam, Man Kee and Lim, Jun Wei and Tan, Inn Shi and Foo, Henry Chee Yew and Kiew, Peck Loo and Show, Pau Loke and Lee, Keat Teong (2022) The impact of using recycled culture medium to grow Chlorella vulgaris in a sequential flow system: Evaluation on growth, carbon removal, and biochemical compositions. Biomass and Bioenergy, 159 (NA). pp. 1-8. ISSN 0961-9534

Daud, Rohaizan and Ab. Rahim, Nor Zairah and Ibrahim, Roslina and Ya'acob, Suraya and Ab. Raza, Rosida (2018) Critical factors in knowledge communication of Malaysian public sector. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 80-89. ISSN 1992-8645

Daud, S. and Abd Aziz, M. S. and Chaudhary, K. T. and Bahadoran, M. and Ali, J. (2016) Sensitivity measurement of Fibre Bragg grating sensor. Jurnal Teknologi, 78 (3). pp. 277-280. ISSN 0127-9696

David, Michael and Ibrahim, Mohd. Haniff and Idrus, Sevia Mahdaliza (2015) Sampling frequency effect on the absorption cross section of ozone in the visible spectrum. Journal of Optoelectronics and Advanced Materials, 17 (3-4). pp. 403-408. ISSN 1454-4164

David, Michael and Ibrahim, Mohd. Haniff and Idrus, Sevia Mahdaliza and Azmi, Asrul Izam and Ngajikin, Nor Hafizah and Tay, Marcus Ching En and Yaacob, Maslina M. and Salim, Mohd. Rashidi and Aziz, Azian Abdul (2015) Progress in ozone sensors performance: a review. Jurnal Teknologi, 73 (6). pp. 23-29. ISSN 0127-9696

Da’u, A. and Salim, N. (2020) Recommendation system based on deep learning methods: a systematic review and new directions. Artificial Intelligence Review, 53 (1). pp. 2709-2748. ISSN 0269-2821

Demun, Amat Sairin (1994) Computerised calculations for water level and velocity variations in the surge tank system. Jurnal Kejuruteraan Awam, 7 (1). pp. 9-18. ISSN 0128-0147  

Derahman, Mohd. Nawi (1989) In-situ combustion - a thermal method in enhanced oil recovery. Buletin FKKKSA, 3 (2). pp. 48-54. ISSN 0128-0740

Derawi, D. and Salim, N. D. and Zamzuri, H. and Abdul Rahman, M. A. and Nonami, K. (2016) Robust attitude control design for a low-cost hexarotor micro aerial vehicle. Transactions of the Institute of Measurement and Control, 38 (6). pp. 701-721. ISSN 0142-3312

Derawi, D. and Salim, N. D. and Zamzuri, H. and Rahman, M. A. A. and Nonami, K. (2016) Robust hovering controller for uncertain multirotor micro aerial vehicles (MAVS) in gps-denied environments: IMAGE-BASED. Jurnal Teknologi, 78 (6-13). pp. 37-44. ISSN 0127-9696

Dhar, S. and Shukla, P. R. and Pathak, M. (2017) India's INDC for transport and 2 C stabilization target. Chemical Engineering Transactions, 56 . pp. 31-36. ISSN 2283-9216

Do, Nguyet Quang and Selamat, Ali and Krejcar, Ondrej and Yokoi, Takeru and Fujita, Hamido (2021) Phishing webpage classification via deep learning‐based algorithms: An empirical study. Applied Sciences (Switzerland), 11 (19). pp. 1-32. ISSN 2076-3417

Do, Nguyet Quang and Selamat, Ali and Krejcar, Ondrej and Herrera-Viedma, Enrique and Fujita, Hamido (2022) Deep learning for phishing detection: Taxonomy, current challenges and future directions. IEEE Access, 10 (NA). pp. 36429-36463. ISSN 2169-3536

Dobrovolny, Michal and Benes, Jakub and Krejcar, Ondrej and Selamat, Ali (2022) Sperm-cell detection using YOLOv5 architecture. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13347 (NA). pp. 319-330. ISSN 0302-9743

Dobrovolny, Michal and Benes, Jakub and Langer, Jaroslav and Krejcar, Ondrej (2022) Study on sperm-cell detection using YOLOv5 architecture with labaled dataset. Genes, 14 (2). pp. 1-14. ISSN 2073-4425

Dolah, Rozzeta and Karnik, Rohit and Hamdan, Halimaton (2021) A comprehensive review on biofuels from oil palm empty bunch (Efb): current status, potential, barriers and way forward. Sustainability (Switzerland), 13 (18). pp. 1-29. ISSN 2071-1050

Dollah, N. S. and Amin, M. K. M. and Muzahidul Islam, A. K. M. and Mikami, O. (2019) Electroencephalography (eeg) application on quantifying emotional intelligence during meditation. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). ISSN 2289-8107

Dollah, Rozilawati and Sheng, Chew Yi and Zakaria, Norhawaniah and Othman, Mohd. Shahizan and Rasib, Abd. Wahid (2019) Deep learning classification of biomedical text using convolutional neural network. International Journal of Advanced Computer Science and Applications, 10 (8). pp. 512-517. ISSN 2158-107X

Dubi, I. K. and Waheeb, G. M. and Jabbar, S. A. and Sallehuddin, H. and Satar, N. S. M. and Yahya, F. and Bakar, N. A. A. (2019) System for rogue voip phone detection and managing voip phone mobility. International Journal of Recent Technology and Engineering, 8 (2). pp. 2469-2474. ISSN 2277-3878

Duisenbayeva, Sh. S. and Adilbayeva, U. B. and Bekalaeva, A. and Khalenova, A. R. and Urazgaliyeva, S. A. and Arpen-tieva, M. R. and Minghat, A. D. and Kassymova, G. K. (2021) Cognitive pedagogy and teaching approaches via e-learning system. Linguistica Antverpiensia, NA (1). pp. 1609-1624. ISSN 0304-2294

Dung, D. T. and Nguyen, Q. D. and Trinh, D. Q. and Yamada, Y. (2018) Investigating equations used to design a very small normal-mode helical antenna in free space. International Journal of Antennas and Propagation, 2018 . ISSN 1687-5869

Durdyev, S. and Ismail, S. (2017) The build-operate-transfer model as an infrastructure privatisation strategy for Turkmenistan. Utilities Policy, 48 . pp. 195-200. ISSN 0957-1787

Durdyev, S. and Ismail, S. (2016) On-site construction productivity in Malaysian infrastructure projects. Structural Survey, 34 (4-5). pp. 446-462. ISSN 0263-080X

Durdyev, Serdar and Hosseini, M. Reza and Martek, Igor and Ismail, Syuhaida and Arashpour, Mehrdad (2019) Barriers to the use of integrated project delivery (IPD): a quantified model for Malaysia. Engineering, Construction and Architectural Management, 27 (1). pp. 186-204. ISSN 0969-9988

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Ahmad, Fauziah Sh. (2012) Marketing constraints to real estate sector and improvement measures : case study of Turkey. Energy Education Science and Technology Part B : Social and Educational Studies, 4 (4). pp. 2595-2600. ISSN 1308-772X

Durdyev, Serdar and Ismail, Syuhaida (2012) Role of the construction industry in economic development in Turkmenistan. Energy Education Science and Technology Part A : Energy Science and Research, 29 (2). pp. 883-890. ISSN 1308-772X

Durdyev, Serdar and Ismail, Syuhaida and Kandymov, Nurmurat (2018) Structural equation model of the factors affecting construction labor productivity. Journal of Construction Engineering and Management, 144 (4). p. 4018007. ISSN 0733-9364

Durdyev, Serdar and Mohamed, Sherif and Lay, Meng Leang and Ismail, Syuhaida (2017) Key factors affecting construction safety performance in developing countries: Evidence from Cambodia. Construction Economics and Building, 17 (4). pp. 48-65. ISSN 2204-9029

Durdyev, Serdar and Mohandes, Saeed Reza and Mahdiyar, Amir and Ismail, Syuhaida (2022) What drives clients to purchase green building?: The cybernetic fuzzy analytic hierarchy process approach. Engineering, Construction and Architectural Management, 29 (10). pp. 4015-4039. ISSN 0969-9988

Durdyev, Serdar and Omarov, Maksat and Ismail, Syuhaida and Lim, Mengheng (2017) Significant contributors to cost overruns in construction projects of Cambodia. Cogent Engineering, 4 (1). ISSN 2331-1916

Duwee, Yun Shuang and Kiew, Peck Loo and Yeoh, Wei Ming (2022) Multi-objective optimization of pectin extraction from orange peel via response surface methodology: yield and degree of esterification. Journal of Food Measurement and Characterization, 16 (2). pp. 1710-1724. ISSN 2193-4126

Dziyauddin, Rudzidatul Akmam and Kaleshi, Dritan and Doufexi, Angela and Alizadeh, Milad (2015) Performance evaluation of quality of service for joint packet dropping and scheduling. Wireless Persol Communications, 83 (2). pp. 1549-1566. ISSN 0929-6212

Dziyauddin, Rudzidatul Akmam and Niyato, Dusit and Luong, Nguyen Cong and Mohd. Atan, Ahmad Ariff Aizuddin and Mohd. Izhar, Mohd. Azri and Azmi, Marwan Hadri and Mohd. Daud, Salwani (2021) Computation offloading and content caching and delivery in Vehicular Edge Network: A survey. Computer Networks, 197 . p. 108228. ISSN 1389-1286

EI Enshasy, Hesham A. and Mohy EI Din, Mohamed S. and El Sayed, Mohamed and El Sayed, Salah and Haroun, Bakry M. and Hassan, Elsayed A. (2009) Optimization and scaling up of penicillin acylase production process by escherichia coli. World Applied Sciences Journal, 6 (10). pp. 1348-1358. ISSN 1818-4952

Eissa, Noureldin S. and Khairuddin, Uswah and Yusof, Rubiyah (2022) A hybrid metaheuristic-deep learning technique for the pan-classification of cancer based on DNA methylation. Bioinformatics, 23 (1). pp. 1-23. ISSN 1471-2105

El-Saleh, Ayman A. and Alhammadi, Abdulraqeb and Shayea, Ibraheem and Azizan, Azizul and Hassan, Wan Haslina (2022) Mean opinion score estimation for mobile broadband networks using Bayesian Networks. Computers, Materials and Continua, 72 (3). pp. 4571-4587. ISSN 1546-2218

Elfakharany, A. and Yusof, R. and Ismail, N. and Arfa, R. and Yunus, M. (2019) Halalnet: A deep neural network that classifies the halalness of slaughtered chicken from their images. International Journal of Integrated Engineering, 11 (4). pp. 131-138. ISSN 2229-838X

Elfakharany, E. and Ismail, Z. H. (2021) End-to-end deep reinforcement learning for decentralized task allocation and navigation for a multi-robot system. Applied Sciences (Switzerland), 11 (7). ISSN 2076-3417

Elliza Tri Maharani, Elliza Tri Maharani and Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Wibowo, Wibowo and Utami, Dewi and Mazlan, Saiful Amri (2021) A mathematical modelling and experimental study of annular-radial type magnetorheological damper. International Journal of Applied Electromagnetics and Mechanics, 66 (4). pp. 543-560. ISSN 1383-5416

Elnaeim, M. I. and Leong, M. S. and Alfatih, M. S. S. (2017) Life cycle costing in engineering asset management: A study in the steel fabrication industry. International Journal of Mechanical Engineering and Technology, 8 (6). pp. 348-359. ISSN 0976-6340

Elsupikhe, R. F. and Ahmad, M. B. and Shameli, K. and Ibrahim, N. A. and Zainuddin, N. (2016) Photochemical reduction as a green method for the synthesis and size control of silver nanoparticles in κ-Carrageenan. IEEE Transactions on Nanotechnology, 15 (2). pp. 209-213. ISSN 1536-125X

Elsupikhe, Randa Fawzi and Shameli, Kamyar and Ahmad, Mansor (2015) Effect of ultrasonic radiation's times to the control size of silver nanoparticles in kappa-carrageenan. Research on Chemical Intermediates, 41 (11). pp. 8829-8838. ISSN 0922-6168

Erdiwansyah, Erdiwansyah and Mahidin, Mahidin and Yusop, Ahmad Fitri and Muhammad Zaki, Muhammad Zaki and Mamat, Rizalman and Muhibbuddin, Muhibbuddin and Sardjono, Ratna Eko and Che Sidik, Nor Azwadi and Husin, Husni (2021) Investigation of the effect biodiesel-butanol-water fuel blend pressure on a single-cylinder diesel engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 39-47. ISSN 2289-7879

Ergen, Mustafa and Inan, Feride and Ergen, Onur and Shayea, Ibraheem and Tuysuz, Mehmet Fatih and Azizan, Azizul and Ure, Nazim Kemal and Nekovee, Maziar (2020) Edge on wheels with OMNIBUS networking for 6G technology. IEEE Access, 8 . pp. 215928-215942. ISSN 2169-3536

Esfandfard, Elnaz and Wahab, Mohammad Hussaini and Che Amat, Rohayah (2018) Universal design in urban public spaces for people with disability. Case study of Tehran, Iran. Planning Malaysia, 16 (1). pp. 173-182. ISSN 1675-6215

Ettefaghi, E. O. L. and Rashidi, A. and Ghobadian, B. and Najafi, G. and Khoshtaghaza, M. H. and Sidik, N. A. C. and Yadegari, A. and Xian, H. W. (2018) Experimental investigation of conduction and convection heat transfer properties of a novel nanofluid based on carbon quantum dots. International Communications in Heat and Mass Transfer, 90 . pp. 85-92. ISSN 0735-1933

Evers, S. and Yule, C. M. and Padfield, R. and O'Reilly, P. and Varkkey, H. (2017) Keep wetlands wet: the myth of sustainable development of tropical peatlands – implications for policies and management. Global Change Biology, 23 (2). pp. 534-549. ISSN 1354-1013

Ezzat Chan, Arif Fahim and Yahya, Wira Jazair and Abd. Kadir, Hasannuddin and Abdullah, Nik Rosli and Ithnin, Ahmad Muhsin and Hawari, Yahaya and Sugeng, Dhani Avianto (2022) Performance and emissions of neat crude palm oil and its emulsions as diesel engine fuel. Environmental Progress and Sustainable Energy, 41 (2). NA-NA. ISSN 1944-7442

F. N., Ani and Wong, C. C. and H. M. , Noor (2004) Properties of oil-palm-shell-based phenol wood adhesives compared with petroleum-based phenol wood adhesives. Journal of Oil Palm Research, 16 (1). pp. 54-65. ISSN 1511-2780

Fadeyi, Oluwaseun and Krejcar, Ondrej and Maresova, Petra and Kuca, Kamil and Brida, Peter and Selamat, Ali (2020) Opinions on sustainability of smart cities in the context of energy challenges posed by cryptocurrency mining. Sustainability (Switzerland), 12 (1). p. 169. ISSN 2071-1050

Fadhali, Mohamed and Toto, Saktioto and Zainal, Jasman and Munajat, Yusof and Ali, Jalil and Abd Rahman, Rosly (2007) Laser microwelding for reliable packaging of photonic devices. ISESCO International Workshop and Conference on Nonotechnology . p. 1.

Fadhali, Mohamed and Zainal, Jasman and Munajat, Yusof and Abd Rahman, Rosly (2007) Laser welding characterization of kovar and stainless steel alloys as suitable materials for components of photonic devices packaging. International Conference on Advancement of Materials and Nanotechnology (3). p. 1.

Fadhali, Mohamed and Zainal, Jasman and Munajat, Yusof and Ali, Jalil and Abdul Rahman, Rosly (2007) Analysis of laser microwelding applied for photonics devices packaging (14). Journal of solid state science and technology letters, 14 (2). ISSN 0128-8393 (Unpublished)

Fadhilah, Abdul Razak and Ahmad, Robiah and Shamsul, Sarip (2018) High potential of magnet on the performance of dual piezoelectric fans in electronics cooling system. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 469-479. ISSN 2502-4752

Fadhlin Baharuddin, Nurul Amila and Mad Nordin, Mariam Firdhaus and Morad, Noor Azian and Aris, Nor Ilia Anisa and Che Yunus, Mohd. Azizi (2018) Total phenolic, flavonoid content and antioxidant activity of Clinacanthus nutans leaves by water-based ultrasonic assisted extraction. Malaysian Journal of Analytical Sciences, 22 (4). pp. 659-666. ISSN 1394 -2506

Fahami, Sheikh Muhamad Hafiz and Zamzuri, Hairi and Mazlan, Saiful Amri (2015) Development of estimation force feedback torque control algorithm for driver steering feel in vehicle steer by wire System: Hardware in the loop. International Journal of Vehicular Technology, 2015 . p. 314597. ISSN 1687-5702

Faisal, U. H. and Ahmad Sabri, N. S. and Yusof, N. and Tahir, A. A. and Mohd. Said, N. N. and Riyadi, F. A. and Akhir, F. N. M. and Othman, N. and Hara, H. (2021) Draft genome sequence of lignin-degrading agrobacterium sp. Strain s2, isolated from a decaying oil palm empty fruit bunch. Microbiology Resource Announcements, 10 (19). ISSN 2576-098X

Faizal, F. and Khairunnisa, M. P. and Yokote, S. and Lenggoro, I. W. (2018) Carbonaceous nanoparticle layers prepared using candle soot by direct- and spray-based depositions. Aerosol and Air Quality Research, 18 (4). pp. 856-865. ISSN 1680-8584

Faizal Johari, Mohd. Aidy and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Nordin, Nur Azmah and Abdul Aziz, Siti Aishah and Johari, Norhasnidawani and Nazmi, Nurhazimah and Homma, Koji (2021) Shear band formation in magnetorheological elastomer under stress relaxation. Smart Materials and Structure, 30 (4). 045015-045015. ISSN 0964-1726

Faizura Haneem, Faizura Haneem and Kama, Nazri and Abu Bakar, Nur Azaliah (2019) Critical influential determinants of IT innovation adoption at organisational level in local government context. IET Software, 13 (4). pp. 233-240. ISSN 1751-8806

Fan, Yee Van and Peng, Jiang and Klemeš, Jirí Jaromír and Liew, Peng Yen and Lee, Chew Tin (2021) Integrated regional waste management to minimise the environmental footprints in circular economy transition. Resources, Conservation and Recycling, 168 . p. 105292. ISSN 0921-3449

Farh, H. M. H. and Eltamaly, A. M. and Othman, M. F. (2018) Hybrid PSO-FLC for dynamic global peak extraction of the partially shaded photovoltaic system. PloS one, 13 (11). ISSN 1932-6203

Farh, Hassan M. H. and Eltamaly, Ali M. and Ibrahim, Ahmed B. and Othman, Mohd. F. (2019) Dynamic global power extraction from partially shaded photovoltaic using deep recurrent neural network and improved PSO techniques. International Transactions on Electrical Energy Systems, 29 (9). e12061-e12061. ISSN 2050-7038

Farh, Hassan M. H. and Othman, Mohd F. and Eltamaly, Ali M. and Al-Saud, M. S. (2018) Maximum power extraction from a partially shaded PV system using an interleaved boost converter. Energies, 11(10) (2543). pp. 1-18. ISSN 1996-1073

Faridmehr, I. and Tahir, M. M. and Lahmer, T. and Osman, M. H. (2017) Seismic Performance of Steel Frames with Semirigid Connections. Journal of Engineering (United States), 2017 . ISSN 2314-4904

Faridmehr, Iman and Md. Tahir, Mamood and Osman, Mohd. Hanim and Azimi, Mohammadamin (2020) Cyclic behaviour of fully-rigid and semi-rigid steel beam-to-column connections. International Journal of Steel Structures, 20 (2). pp. 365-385. ISSN 1598-2351

Faried, M. and Shameli, K. and Miyake, M. and Zakaria, Z. and Hara, H. and Ahmad Khairudin, N. B. and Etemadi, M. (2016) Ultrasound-assisted in the synthesis of silver nanoparticles using sodium alginate mediated by green method. Digest Journal of Nanomaterials and Biostructures, 11 (2). pp. 547-552. ISSN 1842-3582

Faried, Miftah and Shameli, Kamyar and Miyake, Mikio and Hara, Hirofumi and Ahmad Khairudin, Nurul Bahiyah (2015) Green sonochemical synthesis of silver nanoparticles using marine seaweed as biopolymer media. Digest Journal of Nanomaterials and Biostructures, 10 (4). pp. 1419-1426. ISSN 1842-3582

Faried, Miftah and Suga, Keishi and Okamoto, Yukihiro and Shameli, Kamyar and Miyake, Mikio and Umakoshi, Hiroshi (2019) Membrane surface-enhanced raman spectroscopy for cholesterol-modified lipid systems: Effect of gold nanoparticle size. ACS Omega, 4 (9). pp. 13687-13695. ISSN 2470-1343

Fariq, Nazirul and Ismail, Syuhaida and Ab. Rani, Nur Izzati (2020) Cost risk of railway project and its effective mitigation strategies. Journal of Critical Reviews, 7 (8). pp. 1275-1280. ISSN 2394-5125

Faruq, A. and Abdullah, S. S. and Marto, A. and Bakar, M. A. A. and Hussein, S. F. M. and Razali, C. M. C. (2019) The use of radial basis function and non-linear autoregressive exogenous neural networks to forecast multi-step ahead of time flood water level. International Journal of Advances in Intelligent Informatics, 5 (1). pp. 1-10. ISSN 2442-6571

Faruq, Amrul and Arsa, Hudan Pandu and Mohd. Hussein, Shamsul Faisal and Che Razali, Che Munira and Marto, Aminaton and Abdullah, Shahrum Shah (2020) Deep learning-based forecast and warning of floods in Klang River, Malaysia. Ingenierie des Systemes d'Information, 25 (3). pp. 365-370. ISSN 0163-3131

Fathi, Sharihan and Harun, Aizul Nahar and Rambat, Shuib and Mohd. Nawi, Mohd. Nasrun and Haron, Nuzul Azam (2018) Development of a mobile aquaculture management systems for performance monitoring of aquaculture players. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-11). pp. 113-117. ISSN 2180-1843

Fatima, N. and Nazir, S. and Chuprat, S. (2020) Knowledge sharing factors for modern code review to minimize software engineering waste. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 490-497. ISSN 2158-107X

Fatima, Nargis and Nazir, Sumaira and Chuprat, Suriayati (2020) Knowledge sharing framework for modern code review to diminish software engineering waste. International Journal of Advanced Computer Science and Applications, 11 (6). pp. 442-450. ISSN 2158-107X

Fauzi, Fauzi and Huda, Miftachul and Mat Teh, Kamarul Shukri and Haroon, Zulkiflee and Ripin, Mohd. Nasir and Hehsan, Aminuddin and Abas, Hafiza and Hehsan, Muhamad Rafiqi and Irawan, July and Abadi, Satria and Maseleno, Andino (2018) The design of fuzzy expert system implementation for analyzing transmissible disease of human. International Journal of Pharmaceutical Research, 10 (4). pp. 68-73. ISSN 0975-2366

Fauzi, H. and Shapiai, M. I. and Khairuddin, U. (2020) Transfer learning of bci using cur algorithm. Journal of Signal Processing Systems, 92 (1). pp. 109-121. ISSN 1939-8018

Fauzi, N. F. and Yamada, Y. and Ali, M. T. and Abd. Rahman, N. H. (2018) Feed system design of a parabolic reflector antenna for Malaysia shaped beam coverage. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2). pp. 55-59. ISSN 2180-1843

Febriyana, Royke Vincentius and Pernyata, Ramadhan S. and Andansari, Dita (2022) Two-sided manual machining method for three-axis CNC milling machine for small and medium-sized enterprises. Journal of Mechatronics, Electrical Power, and Vehicular Technology, 13 (1). pp. 79-87. ISSN 2087-3379

Fiedler, Patrique and Fonseca, Carlos and Supriyanto, Eko and Zanow, Frank and Haueisen, Jens (2022) A high-density 256-channel cap for dry electroencephalography. Human Brain Mapping, 43 (4). pp. 1295-1308. ISSN 1065-9471

Firdaus, Firdaus and Ahmad, Noor Azurati and Sahibuddin, Shamsul and Dziyauddin, Rudzidatul Akmam (2020) Modelling the effect of human body around user on signal strength and accuracy of indoor positioning. International Journal of Integrated Engineering, 12 (7). pp. 72-80. ISSN 2229-838X

Fong, Wan Heng and Salleh, Shaharuddin (2004) A visual tool for determining the maximum independent set of a graph using the polynomial formulation method. Jurnal Teknologi, 41 . pp. 65-72.

Foo, Dominic Chwan Yee and Abd. Manan, Zainuddin and Yunus, R. M. and Abdul Aziz, Ramlan (2004) Synthesis of mass exchange network for batch processes - part 1: utility targeting. Chemical Engineering Sciences , 59 . pp. 1009-1026. ISSN 0009-2509

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Abdul Aziz, Ramlan (2003) Water cascade analysis technique for minimum flowrate targeting: tabular and numerical approach. Proceedings of International Conference on Chemical and Bioprocess Engineering . pp. 414-421.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Mohd Yunus, Rosli and Abdul Aziz, Ramlan (2003) Synthesis of mass exchange networks for batch processes. Part 2: Batch network design. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 809-814.

Foong, Chan Choong and Liew, Peng Yen and Lye, An Jie (2022) Changes in motivation and its relationship with academic performance among first-year chemical engineering students. Education for Chemical Engineers, 38 (NA). pp. 70-77. ISSN 1749-7728

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Bani, N. A. and Mas'ud, A. A. and Ardila-Rey, J. A. and Karim, M. E. (2018) Annual prediction output of an RADTIRC-PV module. Energies, 11 (3). ISSN 1996-1073

Fujita, Kento and Okada, Masaki and Hoshina, Taka Aki and Yamada, Hidetaka and Tsuji, Tomoya and Hiaki, Toshihiko (2019) CO2 absorption effect on electric conductivities for butylethanolamine and methyldiethanolamine aqueous solutions at 313 K. Bunseki Kagaku, 68 (9). pp. 647-655. ISSN 0525-1931

Fukuda, K. and Morita, T. (2017) Physical model of adhesive wear in early stage of sliding. Wear, 376-37 . pp. 1528-1533. ISSN 0043-1648

Fukuda, K. and Sheng, S. L. and Subhi, Z. A. (2019) Tribological behavior of hydrophilic and hydrophobic surfaces in atmosphere with different relative humidity. Tribology Online, 14 (5). pp. 353-358. ISSN 1881-218X

Fukuda, Kanao (2020) Influences of trace water derived from an atmospheric environment on the sliding of solid materials. Toraibarojisuto/Journal of Japanese Society of Tribologists, 65 (10). pp. 603-609. ISSN 0915-1168

Fukuda, Kanao (2012) Influencing factors on the wear of materials. Journal of Japanese Society of Tribologists, 57 (5). pp. 327-332. ISSN 0915-1168

Fukuda, Kanao and Subhi, Zaid Ali and Morita, Takehiro (2015) Analytical study on the growth and transfer of adhesive substances generated on the surface in the early stage of sliding. Wear, 330 . pp. 64-69. ISSN 0043-1648

Gan, P. G. and Sam, S. T. and Abdullah, M. F. and Omar, M. F. and Tan, L. S. (2020) An alkaline deep eutectic solvent based on potassium carbonate and glycerol as pretreatment for the isolation of cellulose nanocrystals from empty fruit bunch. BioResources, 15 (1). ISSN 1930-2126

Gan, Yee Siang and Luo, Shi Hao and Li, Chih Hsueh and Chung, Shih Wei and Liong, Sze Teng and Tan, Lit Ken (2022) An automated cucumber inspection system based on neural network. Journal of Food Process Engineering, 45 (9). n/a. ISSN 0145-8876

Ganesen, Rachel and Abu Bakar, Asmidar and Ramli, Ramona and Abdul Rahim, Fiza and Ahmad Zawawi, Md. Nabil (2022) Cybersecurity risk assessment: modeling factors associated with higher education institutions. nternational Journal of Advanced Computer Science and Applications, 11 (8). pp. 355-362. ISSN 2158-107X

Ghaffari, Babak Vazifehkhah and Kouhnavard, Mojgan and Aihara, Takeshi and Kitajima, Tatsuo (2015) Mathematical modeling of subthreshold resonant properties in pyloric dilator neurons. Biomed Research International, 2015 . ISSN 2314-6133

Ghafourian, K. and Mohamed, Z. and Ismail, S. and Malakute, R. and Abolghasemi, M. (2016) Current status of the research on construction and demolition waste management. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Ghalehteimouri, K. J. and Shamaei, A. and Ros, F. C. (2021) Effectiveness of spatial justice in sustainable development and classification of sustainability in Tehran province. Regional Statistics, 11 (2). pp. 52-80. ISSN 2063-9538

Ghani, I. A. and Sidik, N. A. C. and Mamat, R. and Najafi, G. and Ken, T. L. and Asako, Y. and Japar, W. M. A. A. (2017) Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels. International Journal of Heat and Mass Transfer, 114 . pp. 640-655. ISSN 0017-9310

Ghazali, Naseem H. and Abdul Manaf, Azizah and Sulong, Ghazali (2015) High capacity watermarking technique for medical images using fibonacci decomposition. International Journal of Applied Engineering Research, 10 (2). pp. 3431-3438. ISSN 0973-4562

Ghazali, Norizzawati M. and Tomizawa, Hiroshi and Hagiwara, Noriyuki and Suzuki, Katsuya and Hashim, Abdul M. and Yamaguchi, Tomohiro and Akita, Seiji and Ishibashi, Koji (2019) Fabrication of tunnel barriers and single electron transistors in suspended multi-wall carbon nanotubes. AIP Advances, 9 (10). p. 105015. ISSN 2158-3226

Ghazali, Nur Syazwani and Baharun, Sabariah and Islam, A. K. M. Muzahidul and Wada, Koichi (2018) Designing a maintenance free multi-channel wireless sensor network protocol. Jurnal Teknologi, 80 (2). pp. 67-75. ISSN 0127-9696

Ghazali, Razatulshima and Ahmad, Mohammad Nazir and Sedera, Darshana and Zakaria, Nor Hidayati (2019) The mediating role of knowledge integration model for enterprise systems success. Journal of Enterprise Information Management, 32 (1). pp. 75-97. ISSN 1741-0398

Gholampour, Gholamreza and Abdul Rahim, Abdul Rahman (2015) The evaluation of operational performance of supply chain at automotive industry. Journal of Theoretical and Applied Information Technology, 73 (3). pp. 383-394. ISSN 1992-8645

Ghumman, A. S. M. and Shamsuddin, M. R. S. and Nasef, M. M. and Yahya, W. Z. N. and Ayoub, M. and Cheah, B. and Abbasi, A. (2021) Synthesis and characterization of sustainable inverse vulcanized copolymers from non-edible oil. ChemistrySelect, 6 (6). ISSN 2365-6549

Ghumman, A. S. M. and Shamsuddin, R. and Nasef, M. M. and Yahya, W. Z. N. and Yahya, A. (2021) Optimization of synthesis of inverse vulcanized copolymers from rubber seed oil using response surface methodology. Polymer, 219 . ISSN 0032-3861

Ghumman, Ali Shaan Manzoor and Shamsuddin, Rashid and Nasef, Mohamed Mahmoud and Maucieri, Carmelo and Ur Rehman, Obaid and Rosman, Arief Aizat and Haziq, Mohamed Izzat and Abbasi, Amin (2022) Degradable slow-release fertilizer composite prepared by ex situ mixing of inverse vulcanized copolymer with urea. Agronomy, 12 (1). pp. 1-13. ISSN 2073-4395

Gilani, Seyyed Mid and Sattarvand, Javad and Hajihassani, Mohsen and Abdullah, Shahrum Shah (2020) A stochastic particle swarm based model for long term production planning of open pit mines considering the geological uncertainty. Resources Policy, 68 . p. 101738. ISSN 0301-4207

Godazgar, Vahid and Majd, Elham and Abu Hassan, Norihan and Abdul Talib, Hayati @ Habibah (2015) A computational method for selecting service quality factors considering the representative models. Journal Of Scientific Research And Development, 2 (6). pp. 39-48. ISSN 1115-7569

Gofar, Nurly and Lee, Lee Min (2009) PERISI: a computer program for preliminary evaluation of rainfall-induced slope instability. Malaysian Journal of Civil Engineering, 21 (2). pp. 235-240. ISSN 1823-7843

Goh, Penny Pei Nei and Mohd. Tobi, Siti Uzairiah and Jasimin, Tuti Haryati (2023) Big data application in automated valuation model for valuation process. Journal of Advanced Research in Business and Management Studies, 30 (1). pp. 1-15. ISSN 2462-1935

Gohari, Adel and Ahmad, Anuar and Abdul Rahim, Ruzairi and Supa’at, A. S. M. and Abd. Razak, Shukor and Mohammed Gismalla, Mohammed Salih (2022) Involvement of surveillance drones in smart cities: A systematic review. IEEE Access, 10 (NA). pp. 56611-56628. ISSN 2169-3536

Goher, G. and Masrom, M. and Amrin, A. and Abd. Rahim, N. (2021) Disruptive technologies for labor market information system implementation enhancement in the UAE: a conceptual perspective. International Journal of Advanced Computer Science and Applications, 12 (2). pp. 370-379. ISSN 2158-107X

Goher, Ghada and Masrom, Maslin and Amrin, Astuty and Abd. Rahim, Noorlizawati (2020) UAE labor market snapshot skills and educational mismatch during industry 4.0. International Journal of Recent Technology and Engineering (IJRTE), 8 (6). pp. 1332-1340. ISSN 2277-3878

Gopinath, S. C. B. and Ramanathan, S. and Yasin, M. Y. M. and Shapiai, M. I. and Ismail, Z. H. and Subramaniam, S. (2021) Essential semiconductor films in micro-/nano-biosensors: current scenarios. Journal of the Taiwan Institute of Chemical Engineers, 127 . ISSN 1876-1070

Gopinath, Subash C. B. and Ismail, Zool Hilmi and Shapiai, Mohd. Ibrahim and Mohd. Sobran, Nur Maisarah (2022) Biosensing human blood clotting factor by dual probes: Evaluation by deep long short-term memory networks in time series forecasting. Biotechnology and Applied Biochemistry, 69 (3). pp. 930-938. ISSN 0885-4513

Gopinath, Subash C. B. and Ismail, Zool Hilmi and Shapiai, Mohd. Ibrahim and Mohd. Yasin, Mohd. Najib (2022) Advancement in biosensor: “Telediagnosis” and “remote digital imaging”. Biotechnology and Applied Biochemistry, 69 (3). pp. 1199-1208. ISSN 0885-4513

Goudarzi, S. and Hassan, W. H. and Anisi, M. H. and Soleymani, S. A. (2016) Comparison between hybridized algorithm of GA–SA and ABC, GA, DE and PSO for vertical-handover in heterogeneous wireless networks. Sadhana - Academy Proceedings in Engineering Sciences, 41 (7). pp. 727-753. ISSN 0256-2499

Goudarzi, Shidrokh and Hassan, Wan Haslina and Baee, Mir Ali Rezazadeh and Soleymani, Seyed Ahmad (2015) The model of customer trust for internet banking adoption. Studies in Computational Intelligence, 595 . pp. 399-414. ISSN 1860-949X

Goudarzi, Shidrokh and Soleymani, Seyed Ahmad and Anisi, Mohammad Hossein and Azgomi, Mohammad Abdollahi and Movahedi, Zeinab and Kama, Nazri and Mohd. Rusli, Hazlifah and Muhammad Khurram Khan, Muhammad Khurram Khan (2022) A privacy-preserving authentication scheme based on Elliptic Curve Cryptography and using Quotient Filter in fog-enabled VANET. Ad Hoc Networks, 128 (NA). pp. 1-16. ISSN 1570-8705

Goudarzi, Shidrokh and Soleymani, Seyed Ahmad and Anisi, Mohammad Hossein and Ciuonzo, Domenico and Kama, Nazri and Abdullah, Salwani and Azgomi, Mohammad Abdollahi and Chaczko, Zenon and Azmi, Azri (2022) Real-time and intelligent flood forecasting using UAV-assisted wireless sensor network. Computers, Materials and Continua, 70 (1). pp. 715-738. ISSN 1546-2218

Gouldson, A. and Colenbrander, S. and Sudmant, A. and Papargyropoulou, E. and Kerr, N. and McAnulla, F. and Hall, S. (2016) Cities and climate change mitigation: economic opportunities and governance challenges in Asia. Cities, 54 . pp. 11-19. ISSN 0264-2751

Gozali, L. and Masrom, M. and Zagloel, T. M. and Haron, H. N. and Dahlan, D. and Daywin, F. J. and Saryatmo, M. A. and Saraswati, D. and Syamas, A. F. and Susanto, E. H. (2018) Critical success and moderating factors effect in Indonesian Public Universities' business incubators. International Journal of Technology, 9 (5). pp. 1049-1060. ISSN 2086-9614

Gozali, L. and Masrom, M. and Zagloel, T. Y. M. and Habibah, Habibah and Haron, N. (2016) A framework of successful business incubators for indonesian public universities. International Journal of Technology, 7 (6). pp. 1086-1096. ISSN 2086-9614

Guozhong, Wang and Webb, J. F. and Jian, Zi (2007) The strictly attractive 1/l2 interaction between steps of crystal surfaces. Surface Science, 601 (9). pp. 1944-1948.

Gurunathan, Balamurugan A. and Khairuddin, Uswah and Azlan Shah, Nazrun Nabill and Ricardo, Martinez Botas (2020) Influence of double entry volute on incidence angle variation under steady flow: Numerical investigation. CFD Letters, 12 (10). pp. 75-89. ISSN 2180-1363

H'ng, Y. M. and Yusup, Y. and Zaki, S. A. (2019) Energy balance analysis and turbulence profile of a darrieus-type vertical axis wind turbine. Journal of Physical Science, 30 (1). pp. 47-70. ISSN 1675-3402

H. S. Ariffin, Sharifah and Schormans, John A. (2008) An acceleration simulation method for power law priority traffic. Elektrika, 10 (1). pp. 60-67. ISSN 0128-4428

Habibullah, Muzafar Shah and Sanusi, Nur Azura and Abdullah, Lazim and Kusairi, Suhal and Golam Hassan, Asan Ali and Azura, Normi (2018) How long does it takes for a poor state to catch-up to a richer state in Malaysia? a note. International Journal of Business and Society, 19 (2). pp. 269-280. ISSN 1511-6670

Haini, Siti Isnaine and Ab. Rahim, Nor Zairah and Megat Mohd. Zainuddin, Norziha and Ibrahim, Roslina (2020) Factors influencing the adoption of open government data in the public sector: a systematic literature review. International Journal on Advanced Science, Engineering and Information Technology, 10 (2). pp. 611-617. ISSN 2088-5334

Hairuddin, Muhammad Nazmi and Mubarak, Nabisab Mujawar and Mohammad Khalid, Mohammad Khalid and Abdullah, Ezzat Chan and Walvekar, Rashmi and Karri, Rama Rao (2019) Magnetic palm kernel biochar potential route for phenol removal from wastewater. Environmental Science and Pollution Research, 26 (34). pp. 35183-35197. ISSN 0944-1344

Hajalilou, A. and Mazlan, S. A. and Shameli, K. (2016) A comparative study of different concentrations of pure Zn powder effects on synthesis, structure, magnetic and microwave-absorbing properties in mechanically-alloyed Ni-Zn ferrite. Journal of Physics and Chemistry of Solids, 96-97 . pp. 49-59. ISSN 0022-3697

Hajalilou, A. and Mazlan, S. A. and Shila, S. T. (2016) Magnetic carbonyl iron suspension with Ni-Zn ferrite additive and its magnetorheological properties. Materials Letters, 181 . pp. 196-199. ISSN 0167-577X

Hajalilou, A. and Mazlan, S. A. and Shilan, S. T. and Abouzari Lotf, E. (2017) Enhanced magnetorheology of soft magnetic carbonyl iron suspension with binary mixture of Ni-Zn ferrite and Fe3O4 nanoparticle additive. Colloid and Polymer Science, 295 (9). pp. 1499-1510. ISSN 0303-402X

Hajalilou, Abdollah and Kianvash, Abbas and Lavvafi, Hossein and Shameli, Kamyar (2018) Nanostructured soft magnetic materials synthesized via mechanical alloying: a review. Journal of Materials Science: Materials in Electronics, 29 (2). pp. 1690-1717. ISSN 0957-4522

Hajar, S. and Rashid, M. and Nurnadia, A. and Ammar, M. R. (2016) PrekotAC as a new filter aids material for fabric filter in air filtration system. Jurnal Teknologi, 78 (3-2). pp. 19-24. ISSN 0127-9696

Hajihassani, M. and Kalatehjari, R. and Marto, A. and Mohamad, H. and Khosrotash, M. (2020) 3D prediction of tunneling-induced ground movements based on a hybrid ann and empirical methods. Engineering with Computers, 36 (1). pp. 251-269. ISSN 0177-0667

Haladin, Nur’ain Balqis and Ibrahim, Noor Aireen and Rajab, Azizah (2017) HIV communication challenges faced by HIV specialist nurses in Malaysia government hospitals. Language for Specific Purposes (LSP) International Journal, 4 (1). pp. 37-54. ISSN 2601-002x

Halbouni, Asmaa and Gunawan, Teddy Surya and Habaebi, Mohamed Hadi and Halbouni, Murad and Mira Kartiwi, Mira Kartiwi and Ahmad, Robiah (2022) Machine learning and deep learning approaches for CyberSecurity: A review. IEEE Access, 10 (NA). pp. 19572-19585. ISSN 2169-3536

Halbouni, Asmaa and Teddy Surya Gunawan, Teddy Surya Gunawan and Habaebi, Mohamed Hadi and Halbouni, Murad and Mira Kartiwi, Mira Kartiwi and Ahmad, Robiah (2022) CNN-LSTM: Hybrid deep neural network for network intrusion detection system. IEEE Access, 10 (NA). pp. 99837-99849. ISSN 2169-3536

Hambali, Nur Ashikyn and Hashim, Abdul Manaf (2015) Synthesis of Zinc Oxide Nanostructures on Graphene/Glass Substrate via Electrochemical Deposition: Effects of Potassium Chloride and Hexamethylenetetramine as Supporting Reagents. no-Micro Letters, 7 (4). pp. 317-324. ISSN 2311-6706

Hamdan, A. R. and Fathi, M. S. and Mohamed, Z. (2018) Evolution of Malaysia's technology transfer model facilitated by national policies. International Journal of Engineering and Technology(UAE), 7 (2). pp. 196-202. ISSN 2227-524X

Hamdan, Halimaton and Dolah, Rozzeta and Yahaya, Haryanti and Mohd. Basir, Norsahika and Karnik, Rohit (2021) Conversion of oil palm empty fruit bunch (EFB) biomass to bio-oil and jet bio-fuel by catalytic fast-pyrolysis process. ASM Science Journal, 14 (NA). pp. 1-11. ISSN 1823-6782

Hamdan, Mohd. Fadhli and Mohd. Noor, Siti Nurfadhlina and Abd. Aziz, Nazrin and Pua, Teen Lee and Tan, Boon Chin (2022) Green revolution to gene revolution: technological advances in agriculture to feed the world. Plants, 11 (10). pp. 1-31. ISSN 2223-7747

Hameed, Shilan S. and Hassan, Rohayanti and Hassan, Wan Haslina and Muhammadsharif, Fahmi F. and Abdul Latiff, Liza (2021) HDG-select: A novel GUI based application for gene selection and classification in high dimensional datasets. PLoS ONE, 16 . e0246039-e0246039. ISSN 1932-6203

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza (2021) An efficient fog-based attack detection using ensemble of MOA-WMA for internet of medical things. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). pp. 774-785. ISSN 2367-4512

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza and Ghabban, Fahad (2021) A systematic review of security and privacy issues in the internet of medical things; the role of machine learning approaches. PeerJ Computer Science, 7 . pp. 1-44. ISSN 2376-5992

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza and Muhammad, Fahmi F. (2021) A comparative study of nature-inspired metaheuristic algorithms using a three-phase hybrid approach for gene selection and classification in high-dimensional cancer datasets. Soft Computing, 25 (13). pp. 8683-8701. ISSN 1432-7643

Hamid, Mohd. Fauzi and Low, Ee Chai (1995) Kesan penggunaan sekam padi dan sabut kelapa sawit ke atas masa penebalan dan kekuatan mampatan simen. Buletin FKKKSA, 9 (1). pp. 17-23. ISSN 0128-0740

Hamid, Khalid and Muhammad Waseem Iqbal, Muhammad Waseem Iqbal and Arif, Erssa and Mahmood, Yasir and Khan, Ahmad Salman and Kama, Mohd. Nazri and Azmi, Azri and Ikram, Atif (2022) K-Banhatti invariants empowered topological investigation of bridge networks. Computers, Materials and Continua, 73 (3). pp. 5423-5440. ISSN 1546-2218

Hamid, Muh. Imran and Anwari, Makbul and Taufik, Taufik (2008) Comparison of current control methods on carrier based VSI-PWM inverter drivers from line power quality aspects. TELKOMNIKA (Telekomunikasi Komputasi Elektronika Kendali), 6 (2). pp. 93-100. ISSN 1693-6930

Hamid, U. Z. A. and Ariff, M. H. M. and Zamzuri, H. and Saito, Y. and Zakaria, M. A. and Rahman, M. A. A. and Raksincharoensak, P. (2017) Piecewise trajectory replanner for highway collision avoidance systems with safe-distance based threat assessment strategy and nonlinear model predictive control. Journal of Intelligent and Robotic Systems: Theory and Applications . pp. 1-23. ISSN 0921-0296 (In Press)

Hamid Toloue, A. T. and Ikohza, Anthony Centeno Nano (2015) An enhanced sensitive graphene-based spr biosensor with angular modulation. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7119-7123. ISSN 1819-6608

Hamid, Mohd. Fauzi (1993) Kesan bahan tambah pelambat ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 7(2) . pp. 8-11. ISSN 0128-0740

Hamid, Mohd. Fauzi (1990) Kesan bentonit ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 4 (1). pp. 1-4. ISSN 0128-0740

Hamid, Mohd. Fauzi (1991) Kesan pencemaran garam ke atas kekuatan dan kebolehtelapan simen. Buletin FKKKSA, 5 (1). pp. 21-24. ISSN 0128-0740

Hamid, Mohd. Fauzi and A. Karim, Khairuddin and Md. Noor, Nazily (1993) Penggunaan sekam padi dalam penyimenan telaga minyak. Buletin FKKKSA (7(1)). pp. 31-36. ISSN 0128-0740

Hamid, Mohd. Fauzi and Abdul Karim, Khairuddin and Mohd. Noor, Nazily (1994) Penggunaan sabut kelapa sawit sebagai bahan tambah kehilangan bendalir simen. Buletin FKKKSA, 8(1) . pp. 62-66. ISSN 0128-0740

Hamit, Laura Cassandra and Md. Sarkan, Haslina and Mohd. Azmi, Nurulhuda Firdaus and Mahrin, Mohd. Naz’ri and Chuprat, Suriayati and Yahya, Yazriwati (2020) Adopting ISO/IEC 27005:2011-based risk treatment plan to prevent patients data theft. International Journal on Advanced Science, Engineering and Information Technology, 10 (3). pp. 914-919. ISSN 2088-5334

Hamza, Bashar J. and Saad, Wasan Kadhim and Shayea, Ibraheem and Ahmad, Norulhusna and Mohamed, Norliza and Nandi, Dalia and Gholampour, Golshan (2021) Performance enhancement of SCM/WDM-RoF-XGPON system for bidirectional transmission with square root module. IEEE Access, 9 . pp. 49487-49503. ISSN 2169-3536

Hamzah, Azura and Saris, Nur Najahatul Huda and Azrin, Nur Nadia Asila (2018) Flat-gain and wideband EDFA by using dual stage amplifier technique. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-6). pp. 25-29. ISSN 2180-1843

Hamzah, Hairul Mardiah and Teo, Ming Ting and Lotf, Ebrahim Abouzari and Rasit Ali, Roshafima and Sha'rani, Saidatul Sophia (2022) An identification size of the interdigitated flow field on pressure loss effects and efficiencies in vanadium redox flow battery. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (2). pp. 128-138. ISSN 2289-7879

Hamzah, N. A. and Othman, N. and Musa, W. A. (2020) A qualitative analysis on causes of human trafficking from the perspective of Malaysian authorities. International Journal of Academic Research in Business and Social Sciences, 10 (3). pp. 77-90. ISSN 2222-6990

Hamzah, Nurul Amirah and Othman, Nooraini and Musa, Wardatul Aishah (2020) Increasing and reduction factors in the issue of human trafficking in Malaysia from the perspective of enforcement. International Journal of Academic Research in Business and Social Sciences, 10 (8). pp. 843-861. ISSN 2222-6990

Haneem, F. and Bakar, H. A. and Kama, N. and Mat, N. Z. N. and Ghazali, R. and Mahmood, Y. (2020) Recent progress of blockchain initiatives in government. International Journal of Advanced Computer Science and Applications, 11 (11). ISSN 2158-107X

Haneem, Faizura and Kama, Nazri and Taskin, Nazim and Pauleen, David and Abu Bakar, Nur Azaliah (2019) Determinants of master data management adoption by local government organizations: an empirical study. International Journal of Information Management, 45 . pp. 25-43. ISSN 0268-4012

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Abd. Aziz, Madzlan and Ismail, Ahmad Fauzi and Rahman, Mukhlis A. and Othman, Mohd. Hafiz Dzarfan (2015) Synthesis of graphene oxide nanosheets via modified hummers’ method and its physicochemical properties. Jurnal Teknologi, 74 (1). pp. 195-198. ISSN 0127-9696

Hao, T. J. and Mustakim, S. S. and Thilagavathy, Thilagavathy and Minghat, A. D. and Suhid, A. and Abd. Manaf, U. K. and Yet, T. S. (2020) An evaluation of moral education's in enriching student's moral behaviour. International Journal of Advanced Science and Technology, 29 (7). pp. 357-365. ISSN 2005-4238

Hapipi, N. M. and Mazlan, S. A. and Ubaidillah, U. and Aziz, S. A. A. and Khairi, M. H. A. and Nordin, N. A. and Nazmi, N. (2020) Solvent dependence of the rheological properties in hydrogel magnetorheological plastomer. International Journal of Molecular Sciences, 21 (5). ISSN 1661-6596

Haque, S. K. M. and Rey, J. A. J. and Umar, Y. and Mas’ud, A. A. and Sukki, F. M. and Jume, B. H. and Rahman, H. and Bani, N. A. (2021) Application and suitability of polymeric materials as insulators in electrical equipment. Energies, 14 (10). ISSN 1996-1073

Haron, Habibollah and Mohamed, Dzulkifli (2001) Pendekatan Pengoptimuman Dalam Penghasilan Objek Tiga Dimensi Daripada Lukisan Garisan Dua Dimensi. Jurnal Teknologi C (34C). pp. 53-62. ISSN 0127-9696

Haron, Habibollah and Shamsuddin, Siti Mariyam and Mohamed, Dzulkifli (2004) Chain code algorithm in deriving T-Junction and region of a freehand sketch. Jurnal Teknologi D (40D). pp. 25-36. ISSN 0127-9696

Haron, N. A. and Hua, L. T. and Hassim, S. and Eftekhari, F. and Muhammad, M. T. and Harun, A. N. (2019) Strategies to improve communication management within virtual project teams. Pertanika Journal of Science and Technology, 27 (4). ISSN 0128-7680

Haron, Suhaila and Ariffin, Aini Suzana (2018) Conceptualizing nurse professional governance to enhance performance, quality and safety of health services. Journal Of Science, Technology And Innovation Policy (JOSTIP), 4 (1). pp. 29-39. ISSN 2550-2018

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2009) Modeling of sound propagation in urban streets containing trees using Markovian technique. Malaysian Journal of Civil Engineering, 21 (1). pp. 55-68. ISSN 1823-7843

Haron , Habibollah and Shamsuddin , Siti Mariyam and Mohamed, Dzulkifli (2005) A new corner detection algorithm for chain code representation. International Journal of Computer Mathematics, 82 (8). pp. 941-950. ISSN 0020-7160

Haron1, N. A. and Raja Soh, R. P. Z. A. and Harun, A. N. (2017) Implementation of building information modelling (Bim) in malaysia: A review. Pertanika Journal of Science and Technology, 25 (3). pp. 661-674. ISSN 0128-7680

Harris, Jeremy and Durdyev, Serdar and Tokbolat, Serik and Ismail, Syuhaida and Kandymov, Nurmurat and Mohandes, Saeed Reza (2019) Understanding construction stakeholders' experience and attitudes toward Use of the structurally insulated panels (SIPs) in New Zealand. Sustainability (Switzerland), 11 (19). pp. 1-14. ISSN 2071-1050

Harris, Jeremy and Durdyev, Serdar and Tokbolat, Serik and Ismail, Syuhaida and Kandymov, Nurmurat and Mohandes, Saeed Reza (2019) Understanding construction stakeholders’ experience and attitudes toward use of the structurally insulated panels (SIPs) in New Zealand. Sustainability (Switzerland), 11 (19). p. 5458. ISSN 2071-1050

Harudin, N. and Jamaludin, K. R. and Ramlie, F. and Muhtazaruddin, M. N. and Che Razali, C. M. and W. Muhamad, W. Z. A. (2020) Binary particle swarm optimization for variables selection optimization Taguchi's T method. Matematika . pp. 69-84. ISSN 0127-9602

Harudin, Nolia and Ramlie, Faizir and Wan Muhamad, Wan Zuki Azman and Muhtazaruddin, M. N. and Jamaludin, Khairur Rijal and Abu, Mohd. Yazid and Marlan, Zulkifli Marlah (2021) Binary Bitwise Artificial Bee Colony as Feature Selection Optimization Approach within Taguchi's T-Method. Mathematical Problems in Engineering, 2021 . p. 5592132. ISSN 1024-123X

Harun, A. M. and Noor, N. F. M. and Zaid, A. and Yusoff, M. E. and Shaari, R. and Affandi, N. D. N. and Fadil, F. and Rahman, M. A. A. and Alam, M. K. (2021) The antimicrobial properties of nanotitania extract and its role in inhibiting the growth of klebsiella pneumonia and haemophilus influenza. Antibiotics, 10 (8). ISSN 207-96382

Harun, A. N. and Ahmad, R. and Mohamed, N. (2016) The effects of continuous lighting (CL) method on the growth development of brassica chinensis for led plant factory in wsn application. Jurnal Teknologi, 78 (12-3). pp. 23-30. ISSN 0127-9696

Harun, A. N. and Samad, S. A. and Nawi, M. N. M. and Haron, N. A. (2016) Existing practices of building information modeling (BIM) implementation in the public sector. International Journal of Supply Chain Management, 5 (4). pp. 166-177. ISSN 2051-3771

Harun, Ahmad Nizar and Ahmad, Robiah and Mohamed, Norliza and Abdul Rahim, Abd. Rahman and Mad Kaidi, Hazilah (2021) Morphological and physiological responses of brassica chinensis on different far-red (FR) light treatments using internet-of-things (IoT) technology. Agriculture (Switzerland), 11 (8). pp. 1-16. ISSN 2077-0472

Harun, Ahmad Nizar and Mohamed, Norliza and Ahmad, Robiah and Abdul Rahim, Abd. Rahman and Ani, Nurul Najwa (2019) Improved Internet of Things (IoT) monitoring system for growth optimization of Brassica chinensis. Computers and Electronics in Agriculture, 164 . p. 104836. ISSN 0168-1699

Harun, Hafizah and Haron, Habibah Norehan and Ibrahim, Halijah and Kamaruddin, Azlina and Abd. Rahman, Rozana (2015) Motor competency of orang asli children from the royal Belum rainforest reserves. International Journal of Economics and Financial Issues, 5 (1S). pp. 40-44. ISSN 2146-4138

Harun, M. F. and Mohammad, R. and Othman, N. and Amrin, A. and Chelliapan, S. and Maarop, N. (2017) Methods for estimating the fatigue properties of UNS C70600 copper-nickel 90/10. International Journal of Mechanical Engineering and Technology (IJMET), 8 (11). pp. 413-422. ISSN 0976-6340

Harun, Mohammad Yusof and Che Yunus, Mohd. Azizi and Morad, Noor Azian and Ismail, Mohd. Halim Shah (2015) An industry survey of the screw press system in palm oil mills: Operational data and malfunction issues. Engineering Failure Alysis, 54 . pp. 146-149. ISSN 1350-6307

Harun, Muhammad Arif and Che Sidik, Nor Azwadi (2022) Thermal conductivity-based optimisation of surfactant on hybrid nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (1). pp. 73-81. ISSN 2289-7879

Harun, Muhammad Arif and Che Sidik, Nor Azwadi and Asako, Yutaka and Tan, Lit Ken (2022) Recent review on preparation method, mixing ratio, and heat transfer application using hybrid nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). pp. 44-53. ISSN 2289-7879

Harun, Muhammad Faiz and Mohammad, Roslina and Kotousov, Andrei (2020) Low cycle fatigue behavior of elbows with local wall thinning. Metals, 10 (2). p. 260. ISSN 2075-4701

Harun, N. H. and Nik Mahmood, N. H. and Othman, S. A. (2020) The effect of talent management factors on teacher's leadership at the secondary school. Management Science Letters, 10 (1). pp. 225-234. ISSN 1923-9335

Hasan, Mohammad Kamrul and Md. Akhtaruzzaman, Md. Akhtaruzzaman and Kabir, S. Rayhan and Gadekallu, Thippa Reddy and Islam, Shayla and Magalingam, Pritheega and Hassan, Rosilah and Alazab, Mamoun and Alazab, Moutaz A. (2022) Evolution of industry and blockchain era: Monitoring price hike and corruption using BIoT for smart government and industry 4.0. IEEE Transactions on Industrial Informatics, 18 (12). pp. 9153-9161. ISSN 1551-3203

Hasan, Rosalyza and Mohamed Razifuddin, Nurul Adina and Che Jusoh, Nurfatehah Wahyuny and Jusoh, Rohayu and Setiabudi, Herma Dina (2018) Artocarpus integer peel as a highly effective low-cost adsorbent for methylene blue removal: Kinetics, isotherm, thermodynamic and pelletized studies. Malaysian Journal of Fundamental and Applied Sciences, 14 (1). pp. 25-31. ISSN 2289-5981

Hasannuddin, A. K. and Wira, J. Y. and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Watanabe, S. and Hirofumi, N. and Azrin, M. A. (2016) Durability studies of single cylinder diesel engine running on emulsion fuel. Energy, 94 . pp. 557-568. ISSN 0360-5442

Hasannuddin, A. K. and Wira, J. Y. and Sarah, S. and Wan Syaidatul Aqma, W. M. N. and Abdul Hadi, A. R. and Hirofumi, N. and Aizam, S. A. and Aiman, M. A. B. and Watanabe, S. and Ahmad, M. I. and Azrin, M. A. (2016) Performance, emissions and lubricant oil analysis of diesel engine running on emulsion fuel. Energy Conversion and Management, 117 . pp. 548-557. ISSN 0196-8904

Hasannuddin, A. K. and Yahya, W. J. and Sarah, S. and Ithnin, A. M. and Syahrullail, S. and Sidik, N. A. C. and Abu Kassim, K. A. and Ahmad, Y. and Hirofumi, N. and Ahmad, M. A. and Sugeng, D. A. and Zuber, M. A. and Ramlan, N. A. (2018) Nano-additives incorporated water in diesel emulsion fuel: Fuel properties, performance and emission characteristics assessment. Energy Conversion and Management, 169 . pp. 291-314. ISSN 0196-8904

Hasannuddin, A. K. and Yahya, Wira Jazair and Srithar, Rajoo and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Aiman, M. A. and Zahari, Muhammad Azahar Zikri and Watanabe, S. and Azrin, M. A and Mohd., S. S. (2016) Effect of emulsion fuel on engine emissions-A review. Clean Technologies and Environmental Policy, 18 (1). pp. 17-32. ISSN 1618-954X

Hasanuzzaman, Mohammad and Al-Amin, Abul Quasem and Khanam, Shamsunnahar and Hosenuzzaman, Md. (2015) Photovoltaic power generation and its economic and environmental future in Bangladesh. Journal of Renewable and Sustainable Energy, 7 (1). ISSN 1941-7012

Hasbollah, Dayang Zulaika Abang and Junin, Radzuan (2015) A preliminary basin scale evaluation framework of potential sedimentary basins in Malaysia for carbon dioxide sequestration. Chemical Engineering Transactions, 45 . pp. 1537-1542. ISSN 2283-9216

Hasham@Hisam, Rosnani and Sulaiman, Norsaupiah and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Che Pa, Nasrul Fikry (2003) Extraction of oleoresin from Zingiber zerumbet Rhizome: Comparative study on yield, zerumbone and curcumin content. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 1176-1179.

Hashemi-Dehkordi, Sayed-Mahdi and Mailah, Musa and Abu Bakar, Abd Rahim (2009) An active control method to reduce friction induced vibration caused by negative damping. Jurnal Mekanikal (29). pp. 19-34. ISSN 0127-3396

Hashim, Haslenda and Douglas, Peter and Elkamel, Ali and Croiset, Eric (2005) Optimization model for energy planning with CO2 emission considerations. Industrial & Engineering Chemistry Research, 44 . pp. 879-890.

Hashim, Abdul Manaf and Kasai, Seiya and Hashizume, Tamotsu and Hasegawa, Hideki (2005) Large modulation of conductance in Interdigital-Gated HEMT devices due to surface plasma wave interactions. Japanese Journal of Applied Physics, 44 . 2729-2734 . ISSN 00214922

Hashim, N. and Yuzir, A. and Al-Qaim, F. F. and Yahaya, N. K. E. M. (2021) Occurrence and distribution of 17 targeted human pharmaceuticals in various aquatic environmental matrices in southeast asia with particular reference to malaysia: a comprehensive review. Journal of the Mexican Chemical Society, 65 (3). ISSN 1870-249X

Hashim, Nabihah and Md. Yusoff, Nelidya and Amrin, Astuty and Asrokin, Azhari and Zainal Abidin, Ahmadun Nijar (2020) Copper line pre-qualification assessment for high-speed broadband in Malaysia. Journal of Advanced Research in Applied Mechanics, 65 (1). pp. 20-26. ISSN 2289-7895

Hashim, Noor Hazarina and Murphy, Jamie Anthony and Doina, Olaru and O'Connor, Peter (2014) Bandwagon and leapfrog effects in internet implementation. International Journal of Hospitality Management, 37 . pp. 91-98. ISSN 0278-4319

Hashim, U. Alyaa and Abu, Aminudin and Zaw, Thiha and Waziralilah, N. Fathiah and Vikneshvaran, T. and Shukor, D. Shakirah (2017) Noise source identification of vacuum cleaner using sound pressure-velocity (PU) probe. International Journal of Mechanical And Production Engineering, 5 (5). pp. 67-70. ISSN 2320-2092

Hashim, Z. H. and Yus Kelana, B. W. and Sentosa, I. and Harun, M. K. and Ho, T. C. F. and Poh, C. T. (2020) Human factors determinants of licensed aircraft engineers that influenced organizational safety performanc. International Journal of Academic Research in Business and Social Sciences . pp. 337-348. ISSN 1222-6990

Hashim Mohammed, Baydaa and Sallehuddin, Hasimi and Safie, Nurhizam and Husairi, Afifuddin and Abu Bakar, Nur Azaliah and Yahya, Farashazillah and Ali, Ihsan and AbdelGhany Mohamed, Shaymaa (2022) Building information modeling and internet of things integration in the construction industry: A scoping study. Advances in Civil Engineering, 2022 (NA). pp. 1-20. ISSN 1687-8086

Hashim, Mazlan (1996) New Textural Extraction Method Using Rolling Ball and Riping Membrane Transforms. Proceedings of Asian Conference on Remote Sensing 1996 .

Hashim, Mazlan and Abu Bakar, Abd Razak and Chek Jusoh, Chek Zainuddin and Ahmad, Samsudin (1992) Topographical Mapping from Stereo Satellite Data - Preliminary Findings. Proceeding of Asian Conference on Remote Sensing 1992 .

Hashim, Mazlan and Yusop, Zulkifli and Ibrahim, Ab. Latif and Said, Norsahida and P.Ramlee, Helmi (2005) Assessment of Impact on Landscape Development to Ecological Service Values and Goods Using Integrated Remote Sensing and GIS Techniques. Proceedings of Asian Conference on Remote Sensing 2005 .

Hashim, Shahrir (1993) Process control in injection moulding machine. Buletin FKKKSA, 7(2) . pp. 34-38. ISSN 0128-0740

Hashim, Shahrir and Rahmat, Abdul Razak (1995) Quality enhancement of plastics recycled by incorporating lubricant additives. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B7-1.

Hasim, Nur Asmadayana and Amin, Latifah and Mahadi, Zurina and Mohamed Yusof, Nor Ashikin and Che Ngah, Anisah and Yaacob, Mashitoh and Abdul Aziz, Azwira (2019) Modern biotechnology: Applications, status, ethical issues and perspectives of researchers and industries on the key ethical principles. Akademika, 89 (1). pp. 57-69. ISSN 0126-5008

Hassan, Azman (1989) Getah asli epoksida: perkembangan dan cabaran. Buletin FKKKSA, 3 (2). pp. 23-29. ISSN 0128-0740

Hassan, Azman and Wahit, Mat Uzir and Ching, Yern Chee (2005) Mechanical and morphological properties of PP/LLPDE/NR blends-effect of polyoctenamer. Polymer-Plastics Technology and Engineering, 44 (7). pp. 1245-1256. ISSN 0360-2559

Hassan, A. A. G. and Saari, M. Y. and Utit, C. and Hassan, A. and Harun, M. (2016) Estimating the impact of gst on cost of production and cost of living in Malaysia. Jurnal Ekonomi Malaysia, 50 (2). pp. 15-30. ISSN 0126-1962

Hassan, Azman (1991) Development and challenges of anaerobic digestion application in wastewater treatment. Buletin FKKKSA, 5 (1). pp. 39-46. ISSN 0128-0740

Hassan, Azmi (2018) Internship framework guidelines for Malaysian Public Higher Education Institutes. Journal of Science, Technology and Innovation Policy, 4 (1). pp. 20-28. ISSN 2550-2018

Hassan, M. A. H. M. and Muda, K. and Toemen, S. and Yusof, N. Z. and Anuar, A. N. and Elias, S. H. and Othman, M. N. and Mohd. Said, M. I. and Mohamad, M. and Affam, A. C. (2016) Rhizofiltration for the enhancement of biofuel production. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2426-2433. ISSN 1819-6608

Hassan, M. Z. and Sapuan, S. M. and Rasid, Z. A. and Mohd Nor, A. F. and Dolah, R. and Md Daud, M. Y. (2020) Impact damage resistance and post impact tolerance of optimum banana-pseudo stem fiber reinforced epoxy sandwich structures. Applied Sciences (Switzerland), 10 (2). ISSN 2076-3417

Hassan, N. and Zamzuri, H. and Wahid, N. and Zulkepli, K. A. and Azmi, M. Z. (2017) Driver's steering behaviour identification and modelling in near rear-end collision. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 861-868. ISSN 1693-6930

Hassan, Noor Hafizah and Selamat, Harihodin and Kumar, Sashi (2018) A review of information technology service management (ITSM) framework for financial regulatory body. Open International Journal of Informatics (OIJI), 6 (2). pp. 1-10. ISSN 2289-2370

Hassan, Zulkafli and Abdul Kadir, Abdul Aziz (1991) Kajian masalah pemendapan parafin: Bahagian 1 - tinjauan terhadap masalah dan mekanisme pemendakan parafin. Buletin FKKKSA, 5 (1). pp. 25-34. ISSN 0128-0740

Hassan, Zulkafli and Madon, Bahrom (1990) Penggunaan abu sekam padi sebagai bahan gantian separa simen penggerudian. Buletin FKKKSA, 4 (1). pp. 12-18. ISSN 0128-0740

Hassan Zardari, Noor Ul and Ian, Cordery (2012) Determining irrigators preferences for water allocation criteria using conjoint analysis. Journal of Water Resource and Protection, 4 (5). pp. 249-255. ISSN 1945-3108

Hassan, Azman (1992) Sifat-sifat mekanikal dan pematangan adunan getah asli/getah asli terepoksida. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Hassan, Azman (1989) Tatacara ‘start-up’ reaktor sesekat anaerobik. Buletin FKKKSA, 3 (1). pp. 31-42. ISSN 0128-0740

Hassan, Azman and Hashim, Shahrir and You, Soon Kin (1992) Penentuan masa pematangan optimum adunan getah asli/getah asli terepoksid. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 71-74.

Hassan, Azman and Ismail, Ahmad Fauzi and Saidi, Hamdani (1991) Gas separation using polymeric membranes: the recent development and its future. Buletin Fakulti Kejuruteraan Kimia & Kejuruteraan Sumber Asli, 5 (2). pp. 4-12. ISSN 0128-0740

Hassan, Azman and Kamala Kannan, Sivaneswaran and Mohd, Mohd. Fadly and Zakaria, Adnan (2001) Acrylic and CPE modified PVC-U composites - effect of rice husk ash on impact properties. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 242-250.

Hassan, Azman and Rahmat, Abdul Razak and Abu Bakar, Aznizam and Ahmad, Mazatusziha (2004) Utilization of agricultural wastes as fillers in thermoplastics composites. KUSTEM Third Annual Seminar on Sustainbility Science and Management . pp. 15-19.

Hassan, Hashim and Saidi, Hamdani and Abdul Aziz, Ramlan (1995) Penghasilan membran gentian geronggang menggunakan spineret buatan tempatan. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A3-1.

Hassan, Onn and Stepanex, J.B. (1989) Liquid to particle heat transfer in fluidised beds. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 24-40.

Hassan, Zulkafli and Abd. Kadir, Abd. Aziz and Hamid, Mohd. Fauzi (1991) Kajian masalah pemendapan parafin (bahagian II): Pencirian minyak mentah berlilin Malaysia. Buletin FKKKSA, 5 (2). pp. 53-58. ISSN 0128-0740

Hau, Yuan Wen and Ayob, Muhammad Akmal and Goh, Voon Hueh and Darul Zaman, Nurul Izzati (2022) Mobile electrocardiogram monitoring system with cloud-based approach. Journal of Human Centered Technology, 1 (2). pp. 105-115. ISSN 2821-3467

Hawari, Y. and Yahya, W. J. and Sonda, I. and Kawashima, H. and Mohamad, Z. and Abu Bakar, M. A. and Abd Kadir, H. (2019) Treating palm oil mill effluent by activated sludge process using submerge mechanical aerator/agitator replacing surface aerator. Jurnal Teknologi, 81 (3). ISSN 2180-3722

Hazman, Muhammad Ajwad Wa’ie and Mohd. Nordin, Ili Najaa Aimi and Mohd. Noh, Faridah Hanim and Khamis, Nurulaqilla and Razif, M. R. M. and Faudzi, Ahmad Athif and Mohd. Hanif, Asyikin Sasha (2020) IMU sensor-based data glove for finger joint measurement. Indonesian Journal of Electrical Engineering and Computer Science, 20 (1). pp. 82-88. ISSN 2502-4752

Heiden, Patrick Van der and Pohl, Christine and Mansor, Shuhaimi and Van Genderen, John L Van (2015) The role of education and training in absorptive capacity of international technology transfer in the aerospace sector. Progress in Aerospace Sciences, 76 . pp. 42-54. ISSN 3744-6615

Hematian, A. and Yang, Y. and Lu, C. and Yazdani, S. (2016) Human motion analysis and classification using radar micro-doppler signatures. Studies in Computational Intelligence, 654 . pp. 1-10. ISSN 1860-949X

Heng, Han Yann and Ali, Mohamad Wijayanuddin and Kamsah, Mohd Zaki (2007) Fault diagnostic advisory system using moving-range chart and hazard operability study. Journal of Chemical and Natural Resources Engineering, 1 . pp. 50-70. ISSN 1823-5255

Hira, Fariha Anjum and Khalid, Haliyana and Abdul Rasid, Siti Zaleha and Baskaran, Shathees and Md. Moshiul, Alam (2022) Blockchain technology implementation for medical data management in Malaysia: potential, need and challenges. TEM Journal, 11 (1). pp. 64-74. ISSN 2217-8309

Hiroyuki, Matsuda and Yuki, Nakazato and Rei, Tsuchiya and Yoshihiro, Inoue and Kiyofumi, Kurihara and Tomoya, Tsuji and Katsumi, Tochigi and Kenji, Ochi (2022) Fish-shaped diagram of liquid–liquid equilibria for the mixtures water + n-alkane + n-alkyl polyglycol ether. Fluid Phase Equilibria, 559 (NA). pp. 1-11. ISSN 0378-3812

Hisan, F. N. A. N. and Othman, M. F. and Manaf, N. S. A. and Rahman, F. A. (2016) Detection of abnormalities based on gamma wave EEG signal for autism spectrum disorder. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 131-136. ISSN 2180-1843

Hishamuddin, Elina and Foo, Chwan Yee and Mohd Yunus, Rosli and Lim, Lee Ping and Ripin, Adnan (2001) Decolourization of recovered base oil from used lubricant oil: a study on the performance of composite adsorbents. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 548-552.

Ho, Chin Siong and Ali, Nor Eeda and Mohd. Akil, Azilah and Ab. Hamid, Ab. Ajib (2008) Ke Arah Kecekapan Tenaga Dalam Sektor Perumahan Bandar. Jurnal Alam Bina, 14 (5). pp. 1-31. ISSN 1511-1369

Holmes, C. and Ambran, S. and Cooper, P. A. and Webb, A. S. and Gates, J. S. and Gawith, C. B. E. and Sahu, J. K. and Smith, P. G. R. (2020) Bend monitoring and refractive index sensing using flat fibre and multicore bragg gratings. Measurement Science and Technology, 31 (8). ISSN 0957-0233

Hon, Vai Yee and How, Lian Lee and Yunan, Mat Hussin and Ismail, Ahmad Fauzi (2001) Separation of water-oil emulsion by using membrane. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 197-202.

Honda, Kosuke and Kurematsu, Masaki and Fujita, Hamido and Selamat, Ali (2022) Multi-task learning for scene text image super-resolution with multiple transformers. Electronics (Switzerland), 11 (22). pp. 1-18. ISSN 2079-9292

Hong, C. and Tanaka, G. and Asako, Y. and Katanoda, H. (2018) Flow characteristics of gaseous flow through a microtube discharged into the atmosphere. International Journal of Heat and Mass Transfer, 121 . pp. 187-195. ISSN 0017-9310

Hong, Chungpyo and Asako, Yutaka and Mohammad Faghri, Mohammad Faghri and Morini, Gian Luca (2020) Average friction factor for laminar gas flow in microtubes. CFD Letters, 12 (3). pp. 22-30. ISSN 2180-1363

Hong, Chungpyo and Yutaka, Asako and Mohammad Faghri, Mohammad Faghri and Rehman, Danish and Morini, Gian Luca (2020) Experiments on measurement of heat transfer rate of gas flow through microchannel with constant wall temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (1). pp. 28-36. ISSN 2289-7879

Hong, Kai Sze and Shaikh Salleh, Sheikh Hussain (2004) Design of educational software for automatic speech recognition (asr) techniques. Jurnal Teknologi (40D). pp. 133-144. ISSN 2180-3722

Hong, Wei Xian and Che Sidik, Nor Azwadi and Aid, Siti Rahmah and Tan, Lit Ken and Asako, Yutaka (2018) Review on preparation techniques, properties and performance of hybrid nanofluid in recent engineering applications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 1-13. ISSN 2289-7879

Hong, Wei Xian and Che Sidik, Nor Azwadi and Najafi, G. (2019) Recent state of nanofluid in automobile cooling systems. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 981-1008. ISSN 1388-6150

Hong, Wei Xian and Che Sidik, Nor Azwadi and Saidur, R. (2022) Hybrid nanocoolant for enhanced heat transfer performance in vehicle cooling system. International Communications in Heat and Mass Transfer, 133 (105922). pp. 1-16. ISSN 0735-1933

Hong, Wei Xian and Saidur, Rahman and Che Sidik, Nor Azwadi and Asako, Yutaka (2022) Viscosity of CuO nanofluid due to nanoparticles size and concentration. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (1). pp. 161-167. ISSN 2462-1943

Hooi Chyee, Doris Toe and Yaktor Joshua Inusa, Yaktor Joshua Inusa and Yong, Kum Weng (2022) Examining the built form in Seremban town for town-plan analysis. Journal Of Tourism, Hospitality And Environment Management, 7 (27). pp. 113-120. ISSN 0128-178X

Hordri, Nur Farhana and Ahmad, Noor Azurati and Siti Sophiayati Yuhaniz, Siti Sophiayati Yuhaniz and Sahibuddin, Shamsul and Mohd. Ariffin, Aswami Fadillah and Mohd. Saupi, Nur Afifah and Zamani, Nazri Ahmad and Jeffry, Yasmin and Md. Senan, Mohamad Firham Efendy (2018) Classification of malware mnalytics techniques: A systematic literature review. International Journal of Security and its Applications, 12 (2). pp. 9-18. ISSN 1738-9976

Hordri, Nur Farhana and Yuhaniz, Siti Sophiayati and Mohd. Azmi, Nurulhuda Firdaus and Shamsuddin, Siti Mariyam (2018) Handling class imbalance in credit card fraud using resampling methods. International Journal of Advanced Computer Science and Applications, 9 (11). pp. 390-396. ISSN 2158-107X

Hua, D. W. and Mahmood, N. H. N. and Lin, L. C. (2017) A review on women leadership in China. Advanced Science Letters, 23 (9). ISSN 1936-6612

Huda, Miftachul and Maseleno, Andino and Mat Teh, Kamarul Shukri and Don, Abdul Ghafar and Basiron, Bushrah and Jasmi, Kamarul Azmi and Mustari, Mohd Ismail and Mohd Nasir, Badlihisham (2018) Understanding Modern Learning Environment (MLE) in Big Data Era. International Journal of Emerging Technologies in Learning (i-JET), 13 (5). pp. 71-85. ISSN 1863-0383

Huda, N. and Mohd., R. and Sultana, N. (2017) Dominant Influence of the Terminal Molecule of PNIPA Chain on Wettability. Sains Malaysiana, 46 (2). pp. 309-315. ISSN 0126-6039

Hui, K. H. and Ooi, C. S. and Lim, M. H. and Leong, M. S. (2016) A hybrid artificial neural network with dempster-shafer theory for automated bearing fault diagnosis. Journal of Vibroengineering, 18 (7). pp. 4409-4418. ISSN 1392-8716

Hung, Phan Van and Dinh, Nguyen Quoc and Yamada, Yoshihide (2022) Negative refractive index-shaped lens antenna with straight line condition for wide angle beam scanning. Journal of Electromagnetic Waves and Applications, 36 (6). 856 -874. ISSN 0920-5071

Hurriyati, Ratih and A., Ana and Minghat, Asnul Dahar and Sangswang, Thospon (2020) Model of purchase impulsive behavior of online consumers: case in Indonesia. International Journal of Advanced Science and Technology, 29 (7S). pp. 290-298. ISSN 2005-4238

Husain, M. K. A. and Zaki, N. I. M. and Husin, S. M. C. and Mukhlas, N. A. and Ahmad, S. Z. A.S. and Husain, N. A. and Rashidi, A. H. M. (2019) Integrated tidal marine turbine for power generation with coastal erosion breakwater. International Journal of Civil Engineering and Technology, 10 (28). pp. 1277-1293. ISSN 0976-6308

Husain, N. A. and Mohd. Rahim, N. S. and Kari, S. and Bade, A. and Chaudhry, H. (2021) The dynamic transmission map for dehazing method in single image with tropical atmospheric condition. Journal of Theoretical and Applied Information Technology, 99 (3). pp. 717-727. ISSN 1992-8645

Hussain, Ahmad and Ani, Farid Nasir and Sulaiman, Norzalia and Adnan, Mohammed Fadzil (2006) Combustion modelling of an industrial municipal waste combustor in Malaysia. International journal of environmental studies, 63 (3). pp. 313-329. ISSN 0020-7233

Hussain, Noor Hamizah and Mohamed Nor, Norhayati and Mulop, Normah and Mohamed, Zainai and Mohd. Ismail, Kamsiah (2015) Knowledge expansion in engineering education: engineering technology as an alternative. The Asian Journal of Technology Management, 8 (1). pp. 37-46. ISSN 1978-6956

Hussain, Syed Aamer and Ahmad, Norulhusna and Shayea, Ibraheem and Mad Kaidi, Hazilah and Abdul Latiff, Liza and Mohamed, Norliza and Mohd. Sam, Suriani (2021) A review of codebook design methods for sparse code multiple access. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 927-935. ISSN 2502-4752

Hussein, Ahmed R. and Dakhil, Adel M. and Rashed, Jabbar R. and Othman, Mohd. Fauzi (2022) Intelligent expert system for diagnosing faults and assessing quality of power transformer insulation oil by DGA method. Misan Journal Of Engineering Sciences, 1 (1). pp. 47-57. ISSN 2957-4250

Hussein, I. S. and Sahibuddin, S. and Nordin, M. J. and Sjarif, N. N. A. (2020) Multimodal recognition system based on high-resolution palmprints. IEEE Access, 8 . ISSN 2169-3536

Hussein, I. S. and Sahibuddin, S. B. and Nordin, M. J. and Sjarif, N. B. A. (2019) Multimodal palmprint technology: a review. Journal of Theoretical and Applied Information Technology, 97 (11). pp. 2882-2896. ISSN 19928645

Hussein, I. S. and Sahibuddin, S. B. and Nordin, M. J. and Sjarif, N. N. A. (2019) The extract region of interest in high-resolution palmprint using 2d image histogram entropy function. Journal of Computer Science, 15 (5). pp. 635-647. ISSN 1549-3636

Hussein, M. and Yoneda, K. and Zaki, Z. M. and Othman, N. A. and Amir, A. (2019) Leachate characterizations and pollution indices of active and closed unlined landfills in Malaysia. Environmental Nanotechnology, Monitoring and Management, 12 . ISSN 2215-1532

Hussein, Munirah and Yoneda, Kenichi and Mohd. Zaki, Zuhaida and Amir, Amnorzahira and Othman, Nor Ázizi (2021) Heavy metals in leachate, impacted soils and natural soils of different landfills in Malaysia: An alarming threat. Chemosphere, 267 . p. 128874. ISSN 0045-6535

Hussein, S. F. M. and Sharifmuddin, N. B. and Al rabeei, A. O. and Faruq, A. and Noorazizi, M. S. and Zaki, S. A. and Abdullah, S. S. (2020) Black box modelling and simulating the dynamic indoor air temperature of a laboratory using autoregressive–moving-average (ARMA) model. Indonesian Journal of Electrical Engineering and Computer Science, 21 (2). pp. 791-800. ISSN 2502-4752

Hussein, Surya Sumarni and Mahrin, Mohd. Naz’ri and Maarop, Nurazean and Abu Bakar, Nur Azaliah (2020) Development and validation of enterprise architecture (EA) readiness assessment model. International Journal On Advanced Science, Engineering And Information Technology, 10 (1). pp. 157-163. ISSN 2088-5334

Hussin, Mohd. Warid and Abdullah, Khairunnisa (2009) Properties of palm oil fuel ash cement based aerated concrete panel subjected to different curing regimes. Malaysia Journal of Civil Engineering, 21 (1). pp. 17-31. ISSN 1823-7843

Huynh, Tai and Nguyen, Hien D. and Zelinka, Ivan and Pham, Xuan Hau and Pham, Vuong T. and Selamat, Ali and Krejcar, Ondrej (2022) A method to detect influencers in social networks based on the combination of amplification factors and content creation. PLoS ONE, 17 (10). pp. 1-31. ISSN 1932-6203

Huzaini, A. S. B. and Mohammad, R. and Othman, N. and A. Kadir, Z. (2020) Exploring of offshore medical emergency response system challenges in oil and gas environment. Journal of Environmental Treatment Techniques, 8 (1). ISSN 2309-1185

H’ng, Y. M. and Zaki, S. A. and Ahmad, N. H. and Yusup, Y. (2017) A short review on pedestrian wind assessment techniques in urban area. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

I., Norhayati and M. Rashid, M. Rashid (2018) Adaptive neuro-fuzzy prediction of carbon monoxide emission from a clinical waste incineration plant. Neural Computing and Applications, 30 (10). pp. 3049-3061. ISSN 0941-0643

Ibrahim, Hanan Moawia and Wan Yusoff, Wan Mokhtar and Abdul Hamid, Aidil and Md. Illias, Rosli and Hassan, Othman and Omar, Othman (2005) Optimization of medium for the production of β-cyclodextrin glucanotransferase using Central Composite Design (CCD). Process Biochemistry, 40 . pp. 753-758. ISSN 0032-9592

Ibrahim, Zuwairie and Kurniawan, Tri Basuki and Khalid, Marzuki (2008) A DNA sequence design for molecular computation of HPP with output visualization based on real-time PCR. 2007 IEEE Congress on Evolutionary Computation, CEC 2007, 1-10 . pp. 1823-1828. ISSN 0128-4428

Ibrahim, Amgad Ahmed Ali and Md. Ibrahim, Nik Noor Nabilah and Centeno, Anthony and Hashim, Abdul Manaf (2018) A short review of architecture and computational analysis in the design of graphene-based bioelectronic devices. Sensors and Materials, 30 (6). pp. 1231-1252. ISSN 0914-4935

Ibrahim, Imanurfatiehah and Mohd. Khairuddin, Anis Salwa and Arof, Hamzah and Yusof, Rubiyah and Hanafi, Effariza (2018) Statistical feature extraction method for wood species recognition system. European Journal of Wood and Wood Products, 76 (1). pp. 345-356. ISSN 0018-3768

Ibrahim, Intisar and Ali, Rosmah and Mohamad Zulkefli, Mohamad Zulkefli and Elfadil, Nazar (2015) Embedded systems pedagogical issue: teaching approaches, students readiness, and design challenges. American Journal Of Embedded Systems And Applications, 3 (1). pp. 1-10. ISSN 2376-6085

Ibrahim, Mohamad Asri and Wahab, Mohammad Hussaini and Mohmad Shukri, Sharyzee (2018) Revealing urban marketplace identity: PUDU. Planning Malaysia, 16 (1). pp. 183-192. ISSN 1675-6215

Ibrahim, Nor Hasniza and Che Hassan, Firdaus and Ali, Sariah and Rusli, Nurul Hanani and Abd. Halim, Noor Dayana and Mohd. Suratin, Maizatul Nabila and Md. Aris, Norliyana (2022) Evaluating the academic trends on design thinking research: a bibliometric analysis from 2000 to 2021. Journal Of Positive School Psychology (JPSP), 6 (4). pp. 1022-1038. ISSN 2717-7564

Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati and Amron, Mohd. Talmizie (2018) Preliminary study on the implementation of 1GovCloud among public agencies in Malaysia. Open International Journal of Informatics (OIJI), 6 (4). pp. 93-103. ISSN 2289-2370

Ibrahim, Sallehuddin and Mohd. Khairi, Mohd. Taufiq and Faramarzi, Mahdi and Md. Yunus, Mohd. Amri (2022) Two-dimensional and pseudo three-dimensional visualisation of foreign objects in milk carton using ultrasonic tomography. Measurement: Food, 6 . pp. 1-18. ISSN 2772-2759

Ibrahim, Thamir K. and Mohammed, Marwah N. and Mohammed, Mohammed Kamil and Najafi, G. and Che Sidik, Nor Azwadi and Basrawi, Firdaus and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118 . pp. 832-846. ISSN 0017-9310

Ibrahim, Wan Nur Hidayah and Anuar, Mohd. Syahid and Selamat, Ali and Krejcar, Ondrej (2022) Botnet detection using independent component analysis. IIUM Engineering Journal, 23 (1). pp. 95-115. ISSN 1511-788X

Ibrahim, Kamarul 'Asri (1992) Development of direct digital control for ethanol fermentation process. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Ibrahim, Kamarul 'Asri (1990) Modelling a cell recycle fermenter using Zymomonas Mobilis: steady state analysis. Buletin FKKKSA, 4 (1). pp. 51-57. ISSN 0128-0740

Ibrahim, Kamarul Asri and Ali, Mohamad Wijayanuddin and Mohd. Ekhsan, Abdul Wahid (1992) Development of methyl ester using batch enzymatic reaction. Buletin FKKKSA, 6 (2). pp. 20-24. ISSN 0128-0740

Ichwan, B. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah and Koga, T. and Idris, M. H. (2016) Development of a modular MR valve using meandering flow path structure. Smart Materials and Structures, 25 (3). ISSN 0964-1726

Ichwan, Burhanuddin and Mazlan, Saiful Amri and Imaduddin, Fitrian and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi (2015) Design and performance analysis of magnetorheological valve module with annular-radial concept. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7743-7748. ISSN 1819-6608

Idrees, M and Lim, Yan and Saidi, Hamdani (1995) Synthesis and characterization of ceramic (alumina) membrane sheet. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A2-1.

Idrees, M and Sathiavathy, D and Saidi, Hamdani (1995) Synthesis and characterization of alumina membranes by sol-gel technique. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A1-1.

Idris, Ahmad Muzammil and Ho, Wai Shin and Hui, Liu Wen and Ramli, Ahmad Fakrul and Mohtar, Aminullah and Hashim, Haslenda and Muis, Zarina Ab and Lim, Jeng Shiun and Liew, Peng Yen (2018) Water-Energy Nexus Cascade Analysis (WENCA) for simultaneous water-energy system optimisation. Chemical Engineering Transactions, 63 . pp. 271-276. ISSN 2283-9216

Idris, Ani and Hassan, Nursia and Mohd. Ismail, Nur Suriani and Misran, Effaliza and Mohd. Yusof, Noordin and Ngomsik, Audrey-Flore and Bee, Agnes (2009) Photocatalytic magnetic separable beads for chromium (VI) reduction. Water Research, 44 (6). pp. 1683-1688. ISSN 0043-1354

Idris, M. H. and Imaduddin, F. and Ubaidillah, Ubaidillah and Mazlan, S. A. and Choi, S. B. (2020) A concentric design of a bypass magnetorheological fluid damper with serpentine flux valve. Actuators, 9 (1). ISSN 2076-0825

Idris, Nur Farahaina and Ismail, Mohd. Arfian and Mohamad, Mohd. Saberi and Kasim, Shahreen and Zakaria, Zalmiyah and Sutikno, Tole (2022) Breast cancer disease classification using fuzzy-id3 algorithm based on association function. IAES International Journal of Artificial Intelligence, 11 (2). pp. 448-461. ISSN 2089-4872

Idris, Ahmad Kamal and Ikhsan, Azman and Kasmungin, Sugiatmo and Siew, Wu Yow (2001) Kesan nisbah mobiliti terhadap kecekapan penempatan gel. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 203-210.

Idris, Ahmad Kamal and Ismail, Issham and Othman, Ariff and Ha, Kwong Tak (1994) The use of Malaysian ilmenite as weighting material in drilling mud. Proceedings of International Conference in Recent Advances in Materials and Mineral Resources '94 .

Idris, Ani and Ismail, Ahmad Fauzi and Shilton, S. J. (2001) A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 127-132.

Idris, Ani and Lee, K. Y. (2004) Preparation of flat sheet cellulose acetate dialysis membrane, suitable for clearance of urea solution. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 2-28.

Idrus, S. M. and Rais, S. S. and Ramli, A. (2008) Bandwidth Analysis of Bootstrap Transimpedance Amplifier for Optical Free Space Receiver. Elektrika, 10 (1). pp. 13-19. ISSN 0128-4428

Idrus, Intan Izafina and Abdul Latef, Tarik and Aridas, Narendra Kumar and Abu Talip, Mohamad Sofian and Yamada, Yoshihide and Tengku Mohmed Noor Izam, Tengku Faiz and Abd. Rahman, Tharek (2020) Design and characterization of a compact single-layer multibeam array antenna using an 8×8 Butler matrix for 5G base station applications. Turkish Journal of Electrical Engineering and Computer Sciences, 28 (2). pp. 1121-1134. ISSN 1300-0632

Ikhsan, Azman (1989) CAI dalam pembelajaran dan pengajaran kejuruteraan petroleum. Buletin FKKKSA, 3 (1). pp. 55-59. ISSN 0128-0740

Ikram, Atif and Abdul Jalil, Masita and Ngah, Amir and Iqbal, Nadeem and Kama, Mohd. Nazri and Azmi, Azri and Khan, Ahmad Salman and Mahmood, Yasir and Alzayed, Assad (2022) Encryption algorithm for securing non-disclosure agreements in outsourcing offshore software maintenance. Computers, Materials and Continua, 73 (2). pp. 3827-3845. ISSN 1546-2218

Illias, Nur Hasniza and Maarop, Nurazean and Hassan, Noor Hafizah and Samy, Ganthan Narayana and Megat Zainuddin, Norziha and Magalingam, Pritheega and Wong, Doris Hui Ten (2022) Assessment of measurement indicators of success factors of Facebook use for flash flood disaster management. Open International Journal of Informatics (OIJI), 10 (2). pp. 48-56. ISSN 2289-2370

Ilmasari, Dhaneswara and Kamyab, Hesam and Yuzir, Ali and Riyadi, Fatimah Azizah and Khademi, Tayebeh and Al-Qaim, Fouad Fadhil and Kirpichnikova, Irina and Krishnan, Santhana (2022) A review of the biological treatment of leachate: Available technologies and future requirements for the circular economy implementation. Biochemical Engineering Journal, 187 (NA). pp. 1-15. ISSN 1369-703X

Ilmasari, Dhaneswara and Sahabudin, Eri and Riyadi, Fatimah Azizah and Abdullah, Norhayati and Yuzir, Ali (2022) Future trends and patterns in leachate biological treatment research from a bibliometric perspective. Journal of Environmental Management, 318 (115594). pp. 1-15. ISSN 0301-4797

Imaduddin, F. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Idris, M. H. and Bahiuddin, I. (2017) Characterization and modeling of a new magnetorheological damper with meandering type valve using neuro-fuzzy. Journal of King Saud University - Science, 29 (4). pp. 468-477. ISSN 1018-3647

Imaduddin, F. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Zamzuri, H. and Fatah, A. Y. A. (2016) Testing and parametric modeling of magnetorheological valve with meandering flow path. Nonlinear Dynamics, 85 (1). pp. 287-302. ISSN 0924-090X

Imaduddin, Fitrian and Mazlan, Saiful Amri and Zamzuri Hairi, Yazid and Mohd. Yazid, Izyan Iryani (2015) Design and performance analysis of a compact magnetorheological valve with multiple annular and radial gaps. Journal of Intelligent Material Systems and Structures, 26 (9). pp. 1038-1049. ISSN 1045-389X

Inagaki, A. and Kanda, M. and Ahmad, N. H. and Yagi, A. and Onodera, N. and Aoki, T. (2017) A Numerical Study of Turbulence Statistics and the Structure of a Spatially-Developing Boundary Layer Over a Realistic Urban Geometry. Boundary-Layer Meteorology, 164 (2). pp. 161-181. ISSN 0006-8314

Inoue, Masashi and Arakida, Masaru and Paudyal, Youb Raj and Razak, Khamarrul Azahari and Tsao, Ting-Chi and Ghosh, Chandan and Ladbrook, Warren and Takeuchi, Kuniyoshi and Ishiwatari, Mikio (2022) Building disaster resilience amid the COVID-19 pandemic: A transdisciplinary approach for decision making. Journal of Disaster Research, 17 (1). pp. 144-151. ISSN 1881-2473

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni and Hussain, Syed Aamer and Ahmad, Norulhusna and Mad Kaidi, Hazilah and Ahmad, Robiah and Dziyauddin, Rudzidatul Akmam (2021) Mobile communication (2G, 3G and 4G) and future interest of 5G in Pakistan: A review. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 1061-1068. ISSN 2502-4752

Irwan, M. A. M. and Nor Azwadi, C. S. and Asako, Y. and Ghaderian, J. (2020) Review on numerical simulations for nano-enhanced phase change material (NEPCM) phase change process. Journal of Thermal Analysis and Calorimetry, 141 (2). pp. 669-684. ISSN 1388-6150

Isahak, Muhammad Reduan and Raja Shahminan, Raja Nafida and Ahmad@Taufik, Fadhlina (2022) Enhancement wood carving in producing premium product. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 58-68. ISSN 0128-178X

Ishak, Fadzil Adly and Johari, Muhd. Khudri and Dolah, Rozzeta (2018) A case study of LEAN application for shortest lead time in composite repair shop. International Journal of Engineering & Technology, 7 (4.13). pp. 112-119. ISSN 2227-524X

Ishak, I. A. and Ali, M. S. M. and Shaikh Salim, S. A. Z. (2017) Mesh size refining for a simulation of flow around a generic train model. Wind and Structures, An International Journal, 24 (3). pp. 223-247. ISSN 1226-6116

Ishak, Izuan Amin and Mat Ali, Mohamed Sukri and Mohd. Yakub, Mohamad Fitri and Shaikh Salim, Sheikh Ahmad Zaki (2019) Effect of crosswinds on aerodynamic characteristics around a generic train model. International Journal of Rail Transportation, 7 (1). pp. 23-54. ISSN 2324-8378

Ishak, M. I. and Ahmad Shafi, A. and Abdul Kadir, M. R. and Sulaiman, E. (2017) Effect of ferrule height and post length on mechanical stress and displacement of endodontically treated maxillary central incisor: a finite element analysis. Journal of Medical and Biological Engineering, 37 (3). pp. 336-344. ISSN 1609-0985

Ishak, Norafeezah and Dziyauddin, Rudzidatul Akmam and Abdullah, Haslaile (2015) Supplier selection procedure in telecommunication industry. Advanced Science Letters, 21 (6). pp. 1658-1661. ISSN 1936-6612

Ishaku, H. T. and Majid, M. Rafee and Johar, Foziah (2006) Urban tourism in developing countries: in the case of Melaka (Malacca) City, Malaysia. Anatolia, 17 . pp. 1-11. ISSN 13032917

Ishimatsu, Jun and Isobe, Hiromi (2016) Thermal effects of ultrasonically excited grinding fluid. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7794-7798. ISSN 1819-6608

Ismail, Abdul Razak and Lim, Felix Choong Hooi (1995) Water-based mud formulations in drilling Terengganu shale formation. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C16-1.

Ismail, Issham (1995) Penggunaan injap keselamatan subpermukaan berpengawalan permukaan di dalam telaga di luar pesisir Terengganu untuk era 1980-an dan 1990-an. Buletin FKKKSA, 9 (1). pp. 7-16. ISSN 0128-0740

Ismail, Issham and Thanapala Singam, Murugesu (2005) A study of formation damage caused by oil-based mud in dynamic condition. Jurnal Teknologi F (43F). pp. 85-94. ISSN 0127-9696

Ismail, A. and Dolah, R. and Miyagi, Z. (2016) Factors identification on optimization of ball placement tool for flip-chip- ball-grid-array product. Jurnal Teknologi, 78 (1). pp. 175-179. ISSN 0127-9696

Ismail, Ahmad Fauzi and Aroon, M. A. and Montazer-Rahmatib, M. M. and Matsuuraa, T. (2010) Morphology and permeation properties of polysulfone membranes for gas separation: effects of non-solvent additives and co-solvent. Separation and Purification Technology, 72 (2). 194 - 202. ISSN 1383-5866

Ismail, Ahmad Fauzi and Saidi, Hamdani and Abdul Rahman, Ali (1993) Numerical solution of a mathematical model for hollow-fiber membrane gas separation system. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 3-1.

Ismail, Ahmad Fauzi and Salim, Mohd. Razman and Bolong, N. and Ranad, D. and Matsuurad, T. and Tabe-Mohammadi, A. (2010) Negatively charged polyethersulfone hollow fiber nanofiltration membrane for the removal of bisphenol A from wastewater. Separation and Purification Technology, 73 (2). 92 - 99. ISSN 1383-5866

Ismail, E. I. and Ahmad, F. and Shafie, S. and Yahaya, H. and Latif, A. A. and Muhammad, F. D. (2020) Copper nanowires based mode-locker for soliton nanosecond pulse generation in erbium-doped fiber laser. Results in Physics, 18 . p. 103228. ISSN 2211-3797

Ismail, Elsayeda and Zolkopli, S. Muhammad Ashraf and Lokman, Muhammad Quisar and Yahaya, Hafizal and Wadi Harun, Sulaiman and Ahmad, Fauzan (2018) Q-switched erbium doped fiber laser incorporating antimony (III) telluride in polyvinyl alcohol as saturable absorber. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 409-415. ISSN 2502-4752

Ismail, Faiz and Muhamad, Rahimah (2018) Risk assessment of tower crane operation in high rise construction. Journal Of Advanced Research In Occupational Safety And Health, 1 (1). pp. 32-38. ISSN 2637-0255

Ismail, Issham and Othman, Ariff and Idris, Ahmad Kamal and Mohd. Johan, Zulkifli and Ha, Kwong Tak (1994) Penggunaan bahan asas besi tempatan sebagai bahan pemberat dalam lumpur penggerudian. Proceedings of Malaysian Science and Technology Congress '94 . pp. 161-166.

Ismail, M. A. and Muhamad, P. and Abu, A. (2016) Modelling and design smart controller of magneto rheological using bouc-wen and sim model for motorcycle suspension system. Jurnal Teknologi, 78 (6-13). pp. 31-36. ISSN 0127-9696

Ismail, M. H. and Ali, M. S. M. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Flow induced vibration of a square cylinder with high scruton number. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3068-3075. ISSN 1819-6608

Ismail, M. I. M. and Dziyauddin, R. A. and Ahmad, N. A. and Ahmad, N. (2018) Vibration detection in water pipelines leakage using wireless three-axis accelerometer sensor. International Journal of Advanced Science and Technology, 112 . pp. 137-150. ISSN 2005-4238

Ismail, N. H. F. and Abu Husain, N. and Mansor, M. S. F and Baharuddin, M. M. and Mohd Zaki, N. I. and Abu Husain, M. K. and Ma’aram, A. and Wiyono, A. S. and Chaiyakul, T. and Ahmad, Y. (2019) Child presence detection system and technologies. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 290-297. ISSN 2550-2239

Ismail, Nur Afini and Shameli, Kamyar and Mohamad Sukri, Siti Nur Amalina and Hara, Hirofumi and Teow, Sin-Yeang and Moeini, Hassan (2022) Sonochemical synthesis of a copper reduced graphene oxide nanocomposite using honey and evaluation of its antibacterial and cytotoxic activities. Frontiers in Molecular Biosciences, 9 (NA). pp. 1-12. ISSN 2296-889X

Ismail, R. and Sudar, N. and Soupiansoupian, M. H. and Ibrahim, R. and Abd. Hamid, S. Z. and Md. Kamalullai, N. N. and Bahari, R. B. and Shahran, M. A. and Mohd. Nazli, N. A. A. (2020) Gamified your learning in the classroom: designing and developing and educational game prototype as a formative assessment for diploma students in UTMSPACE Malaysia. Journal of Advanced Research in Dynamical and Control Systems, 12 (3). pp. 540-546. ISSN 1943-023X

Ismail, S. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Managing health risk among shift workers in the oil and gas industry in Malaysia. International Journal of Civil Engineering and Technology, 10 (1). ISSN 0976-6308

Ismail, Z. H. and Jalaludin, N. A. (2016) River flow and stage estimation with missing observation data using Multi Imputation Particle Filter (MIPF) method. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 145-150. ISSN 2180-1843

Ismail, Z. H. and Mokhar, M. B. M. and Putranti, V. W. E. and Dunnigan, M. W. (2016) A robust dynamic region-based control scheme for an autonomous underwater vehicle. Ocean Engineering, 111 . pp. 155-165. ISSN 0029-8018

Ismail, Z. H. and Muharram, I. A. M. (2016) Calibration of a drag tilt current velocimeter for an open channel application. Jurnal Teknologi, 78 (6-13). pp. 89-94. ISSN 0127-9696

Ismail, Zool H. and Bukhori, Iksan (2021) Efficient detection of robot kidnapping in range finder-based indoor localization using quasi-standardized 2D dynamic time warping. Applied Sciences (Switzerland), 11 (4). pp. 1-18. ISSN 2076-3417

Ismail, Zool Hilmi and Chun, Alan Kh'ng Kean and Razak, Mohd. Ibrahim Shapiai (2019) Efficient herd - outlier detection in livestock monitoring system based on density - based spatial clustering. IEEE Access, 7 (NA). pp. 175062-175070. ISSN 2169-3536

Ismail, Zool Hilmi and Chun, Alan Kh'ng Kean and Razak, Mohd. Ibrahim Shapiai (2019) Efficient herd – outlier detection in livestock monitoring system based on density – Based spatial clustering. IEEE Access, 7 . pp. 175062-175070. ISSN 2169-3536

Ismail, Zool Hilmi and Jalaludin, N. A. (2022) An augmented multiple imputation particle filter for river state estimation with missing observation. Frontiers in Robotics and AI, 8 (NA). pp. 1-16. ISSN 2296-9144

Ismail, Zool Hilmi and Jalaludin, Nor Anija (2019) Robust data assimilation in river flow and stage estimation based on multiple imputation particle filter. IEEE Access, 7 . pp. 159226-159238. ISSN 2169-3536

Ismail, Zool Hilmi and Mohd. Hamami, Mohd. Ghazali (2021) Systematic literature review of swarm robotics strategies applied to target search problem with environment constraints. Applied Sciences (Switzerland), 11 (5). p. 2383. ISSN 2076-3417

Ismail, Abdul Razak and Ng, Chong Yeow (2001) The effects of viscosifiers on Terengganu k-shale hydration. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 456-460.

Ismail, Issham (1998) Asas pelengkapan telaga. Asas pelengkapan telaga . pp. 1-139.

Ismail, Issham (1992) Multiphase flow correlations (Part 1): Development and applications. Buletin FKKKSA, 6 (1). pp. 26-31. ISSN 0128-0740

Ismail, Issham (1994) Penggunaan lumpur dasar minyak dalam industri penggerudian petroleum. Buletin FKKKSA, 8(2) . pp. 6-9. ISSN 0128-0740

Ismail, Issham (1993) Penggunaan penyendat pengeluaran dalam telaga minyak di luar pesisir Terengganu sekitar akhir tahun 1980-an. Buletin FKKKSA, 7(2) . pp. 1-7. ISSN 0128-0740

Ismail, Issham (1994) Pengujian penyelaku aliran berbilang fasa dalaman. Buletin FKKKSA, 8(1) . pp. 23-27. ISSN 0128-0740

Ismail, Issham (1991) The importance of infill drilling in a mature offshore field. Buletin FKKKSA, 5 (2). pp. 24-28. ISSN 0128-0740

Ismail, Issham and Abdul Kadir, Abdul Aziz (1997) Evaluating the performance of Malaysia Hematite and its mixtures with barite as weighting material in water-based mud. Proceedings of Regional Symposium on Chemical Engineering 1997, 1 . pp. 336-346.

Ismail, Issham and Abdul Karim, Mohd Ghazali and Abdul Manan, Muhammad and Abdul Razak, Mohd. Razif (1992) Kajian aliran dua fasa dalam sudut-sudut yang berlainan (Bahagian 1). Buletin FKKKSA, 6 (2). pp. 16-19. ISSN 0128-0740

Ismail, Issham and Hassan, Zulkafli (1989) Ciri keselamatan peralatan gas. Buletin FKKKSA, 3 (1). pp. 49-53. ISSN 0128-0740

Ismail, Issham and Idris, Ahmad Kamal and Samsuri, Ariffin (1993) Pembangunan projek perumahan dalam kawasan bekas lapangan minyak. Buletin FKKKSA (7(1)). ISSN 0128-0740

Ismail, Issham and Junin, Radzuan (2000) Kajian aliran pelbagai fasa dalam industri huluan petroleum. Seminar Kebangsaan Teknologi Makmal ke-4 . pp. 157-163.

Ismail, Issham and Teow, Keat Seang (2000) Kerosakan formasi: punca utama kepada pengurangan pengeluaran minyak. Prosiding Seminar Advances in Malaysian Energy Research .

Isobe, Hiromi and Tsuji, Soutarou and Hara, Keisuke and Ishimatsu, Jun (2021) Improvement of removal rate of tape lapping by applying fluid with ultrasonic excited cavitation. International Journal of Automation Technology, 15 (1). pp. 65-73. ISSN 1881-7629

Istadi, Istadi and Saidina Amin, Nor Aishah (2003) Catalyst screening for CO2 oxidative coupling of methane to C2 hydrocarbons. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 1069-1076.

Iwasaki, T. and Moriyama, M. and Ahmad, N. and Komatsu, K. and Watanabe, K. and Taniguchi, T. and Wakayama, Y. and Hashim, A. M. and Morita, Y. and Nakaharai, S. (2021) Localization to delocalization probed by magnetotransport of hbn/graphene/hbn stacks in the ultra-clean regime. Scientific Reports, 11 (1). ISSN 2045-2322

Izadiyan, Z. and Basri, M. and Fard Masoumi, H. R. and Abedi Karjiban, R. and Salim, N. and Shameli, K. (2017) Modeling and optimization of nanoemulsion containing Sorafenib for cancer treatment by response surface methodology. Chemistry Central Journal, 11 (1). ISSN 1752-153X

Izadiyan, Z. and Shameli, K. and Teow, S. Y. and Yusefi, M. and Kia, P. and Rasouli, E. and Tareq, M. A. (2021) Anticancer activity of 5-fluorouracil-loaded nanoemulsions containing fe3o4/au core-shell nanoparticles. Journal of Molecular Structure, 1245 . ISSN 0022-2860

Izaiddin, M. A. S. and Mustaffa, A. F. and Padzillah, M. H. (2017) Investigation of torque generation capability of mixed flow turbine under steady state conditions. Jurnal Teknologi, 79 (7-3). pp. 105-112. ISSN 0127-9696

Izamshah, R. and Muhammad Akmal, Muhammad Akmal and Ibrahim, Mansor and Kasim, M. and Ding, Songlin and Nawi, M. and Noorazizi, M. (2020) Development of ultrasonic pulsation wire electrical discharge turning device for micro/nano medical part manufacturing. International Journal of Nanoelectronics and Materials, 13 (ISSTE). pp. 363-378. ISSN 1985-5761

Izwan Ismail, Ahmad Shamsul and Ismail, Issham and Zoveidavianpoor, Mansoor and Mohsin, Rahmat and Piroozian, Ali and Misnan, Mohd. Shahir and Sariman, Mior Zaiga (2015) Experimental investigation of oil-water two-phase flow in horizontal pipes: pressure losses, liquid holdup and flow patterns. Journal of Petroleum Science and Engineering, 127 . pp. 409-420. ISSN 0920-4105

Jaafar, G. A. and Abdullah, S. M. and Adli, S. (2019) Enhanced detection algorithms to detect http ddos. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). ISSN 2278-3091

Jaafar, G. A. and Abdullah, S. M. and Adli, S. (2019) A review of technique to self-generate DDoS dataset. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). pp. 1630-1638. ISSN 2278-3091

Jaafar, Ghafar A. and Abdullah, Shahidan M. and Ismail, Saifuladli (2019) Review of recent detection methods for HTTP DDoS attack. Journal of Computer Networks and Communications, 2019 . pp. 1-11. ISSN 2090-7141

Jaafar, Mohd. Zaidi and Vinogradov, J. and Jackson, M. D. (2010) Measurement of streaming potential coupling coefficient in sandstones saturated with natural and artificial brines at high selenity. Journal of Geophysical Research, 115 (812204). 1 - 18. ISSN 0148-0227

Jaafar, N. F. and Marfur, N. A. and Jusoh, N. W. C. and Nagao, Y. and Kamarudin, N. H. N. and Jusoh, R. and Iqbal, M. A. M. (2019) Synthesis of mesoporous nanoparticles via microwave-assisted method for photocatalytic degradation of phenol derivatives. Malaysian Journal of Analytical Sciences, 23 (3). pp. 462-471. ISSN 1394-2506

Jaafar, N. F. and Najman, A. M. M. and Marfur, A. and Jusoh, N. W. C. (2020) Strategies for the formation of oxygen vacancies in zinc oxide nanoparticles used for photocatalytic degradation of phenol under visible light irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 388 . ISSN 1010-6030

Jaganathan, Saravana Kumar and Balaji, Arunpandian and Vellayappan, Muthu Vignesh Ignesh and Subramanian, Aruna Priyadarshni and John, Agnes Aruna Runa and Asokan, Manjeesh Kumar Umar and Supriyanto, Eko (2015) Review: radiation-induced surface modification of polymers for biomaterial application. Journal of Materials Science, 50 (5). pp. 2007-2018. ISSN 0022-2461

Jahangirian, Hossein and Kalantari, Katayoon and Izadiyan, Zahra and Rafiee-Moghaddam, Roshanak and Shameli, Kamyar and Webster, Thomas J. (2019) A review of small molecules and drug delivery applications using gold and iron nanoparticles. International Journal of Nanomedicine, 14 . pp. 1633-1657. ISSN 1176-9114

Jainal, Siti Fatimah and Mohamed, Norliza and Hamzah, Azura (2019) Design of WLAN and WIMAX band rejection utilizing UWB planar antenna comprising a slit in the conductor planes. IIUM Engineering Journal, 20 (2). pp. 90-104. ISSN 1511-788X

Jalaliyoon, Neda and Abu Bakar, Nooh and Mohammadi, Hamed Taherdoost (2015) How to enhance performance of universities by implementing balanced scorecard with using FDM and ANP. International Science Index, Educational And Pedagogical Sciences, 5 (2). pp. 1-4. ISSN 1307-6892

Jalaliyoon, Neda and Abu Bakar, Nooh and Mohd. Mahdzir, Akbariah (2020) Enhanced balanced scorecard framework for performance evaluation of universities. International Journal of Society Systems Science, 12 (4). pp. 286-305. ISSN 1756-252X

Jamaluddin, M. A. S. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramlee, F. and Munir, A. B. and Bani, N. A. and Muhtazaruddin, M. N. and Mas’ud, A. A. and Ardila Rey, J. A. and Ayub, A. S. and Sellami, N. (2019) Potential of floating solar technology in Malaysia. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1638-1644. ISSN 2088-8694

Jamaludin, Juliza and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Rahiman, Hafiz Fazalul and Mohd. Muji, Siti Zarina and Mohd. Fadzil, Naizatul Shima and Leow, Pei Ling and Jumaah, Fahjumi and Ahmad, Anita and Nor Ayob, Nor Muzakkir and Ling, En Hong (2015) Introducing an application of a charged coupled device (CCD) in an optical tomography system. Jurnal Teknologi, 73 (3). pp. 97-102. ISSN 2180-3722

Jamaludin, Madina and Mohammad, Nurul Farahain and Shafie, Sharidan and Ali, Anati (2012) Unsteady mixed convection flow over a cylinder of elliptic cross section near forward stagnation point. Matematika, 28 (2). pp. 109-125. ISSN 0127-8274

Jamaludin, Mohamad Ikhwan and Toto Syaputri, Al Ameerah Elza and Fakhruddin, Khalida and Mesbah, Zarin and Jerald Pereira, Angelique Maryann Pereira Anthony (2022) 3D Bioprinting: Introduction and recent advancement. The Journal Of Medical Device Technology (JMEDITEC), 1 (1). pp. 25-29. ISSN 2948-5436

Jamaludin, Rosmahaida and Maarop, Nurazean and Siti Fatimah, Siti Fatimah and Mustafa, Zaharah and Maarof, Hasmerya and Usman, Bishir (2019) Density functional theory calculations of structure-antioxidant activity of selected phenolic acids and flavonoids found in Malaysian honey. Jurnal Kejuruteraan SI, 2 (1). pp. 77-83. ISSN 0012-80198

Jamaludin, Khairur Rijal and Adenan, Mohd. Shahriman and Md. Daud, Mohd. Yusof and Abd. Raman, Norazmein (2012) Delaminating control on drilling the medium density fiber board with robust optimization. Jurnal Teknologi, 59 . pp. 95-98. ISSN 0127–9696 (Print) ; 2180-3722 (Electronic)

Japar, W. M. A. A. and Sidik, N. A. C. and Asako, Y. (2019) Entropy generation minimization in sinusoidal cavities-ribs microchannel heat sink via secondary channel geometry. CFD Letters, 11 (7). pp. 1-10. ISSN 2180-1363

Japar, Wan Mohd. Arif Aziz and Che Sidik, Nor Azwadi and Aid, Siti Rahmah and Asako, Yutaka and Tan, Lit Ken (2018) A comprehensive review on numerical and experimental study of nanofluid performance in microchannel heatsink (MCHS). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 165-176. ISSN 2289-7879

Jasimin, Tuti Haryati (2018) Mediation effect of social aspect in the relationship between environmental and economic aspects: Their influence on the value of green commercial office property. Planning Malaysia, 16 (1). pp. 251-264. ISSN 1675-6215

Javadi, Ali and Abouzari-Lotf, Ebrahim and Mehdipour-Ataei, Shahram and Zakeri, Masoumeh and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Ripin, Adnan (2015) High refractive index materials: a structural property comparison of sulfide- and sulfoxide-containing polyamides. Journal of Polymer Science, Part A: Polymer Chemistry, 53 (24). pp. 2867-2877. ISSN 0887-624X

Javadi, Ali and Najjar, Zahra and Bahadori, Saedeh and Vatanpour, Vahid and Malek, Ali and Abouzari-Lotf, Ebrahim and Shockravi, Abbas (2015) High refractive index and low-birefringence polyamides containing thiazole and naphthalene units. RSC Advances, 5 (111). pp. 91670-91682. ISSN 2046-2069

Jazayeri, S. D. and Lim, H. X. and Shameli, K. and Yeap, S. K. and Poh, C. L. (2021) Nano and microparticles as potential oral vaccine carriers and adjuvants against infectious diseases. Frontiers in Pharmacology, 12 . ISSN 1663-9812

Jesbains, K. and Kuwano, Noriyuki and Jamaludin, Khairur Rijal and Miyake, Hideto and Hiramatsu, Kazumasa and Suzuki, Shuhei and Mitsuhara, Masatoshi and Hata, S. and Soejima, Youhei (2016) Reduction of dislocation density of aluminium nitride buffer layer grown on sapphire substrate. Journal of Mechanical Engineering and Sciences, 10 (1). pp. 1908-1916. ISSN 2289-4659

Jimbin, V. S. and Ahmad, N. A. (2017) Magnetic field measurement from 132/275 KV overhead power lines. Jurnal Teknologi, 79 (1). pp. 89-95. ISSN 0127-9696

Johari, Anwar and Hashim, H. and Rozainee, M. (2009) Geometrical design of stand pipe air distributors for the combustion of municipal solid waste in a fluidised bed. Jurnal Teknologi, 50 (F). pp. 79-88. ISSN 2180-3722

Johari, M. A. F. and Mazlan, S. A. and Nasef, M. M. and Ubaidillah, U. and Nordin, N. A. and Abdul Aziz, S. A. and Johari, N. and Nazmi, N. (2021) Microstructural behavior of magnetorheological elastomer undergoing durability evaluation by stress relaxation. Scientific Reports, 11 (1). ISSN 2045-2322

Johari, M. A. F. and Mazlan, S. A. and Nordin, N. A. and Ubaidillah, U. and Aziz, S. A. A. and Nazmi, N. and Johari, N. and Choi, S. B. (2021) The effect of microparticles on the storage modulus and durability behavior of magnetorheological elastomer. Micromachines, 12 (8). ISSN 2072-666X

Johari, M. A. F. and Sarman, A. M. and Mazlan, S. A. and Ubaidillah, U. and Nordin, N. A. and Abdul Aziz, S. A. and Johari, N. and Nazmi, N. and Yusuf, S. M. (2021) An insight into amorphous shear band in magnetorheological solid by atomic force microscope. Materials, 14 (16). ISSN 1996-1944

Johari, Mohd. Aidy Faizal and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Nordin, Nur Azmah and Ahmad Khairi, Muntaz Hana and Abdul Aziz, Siti Aishah and Sedlacik, Michal and Nikmat Leong, Siti Asma’ (2022) Natural weathering effects on the mechanical, rheological, and morphological properties of magnetorheological elastomer (MRE) in tropical climate. International Journal of Molecular Sciences, 23 (17). pp. 1-12. ISSN 1422-0067

Joo Kok, Tan and Mohd. Ali, Nor Raihana and Abas, Norzaida (2020) Identification of deficiencies of electricity connection charges guidelines. Science International - Lahore, 32 (4). pp. 501-505. ISSN 1013-5316

Joshi, P. and Okada, T. and Miyabayashi, K. and Miyake, M. (2018) Evaluation of Alkylamine Modified Pt Nanoparticles as Oxygen Reduction Reaction Electrocatalyst for Fuel Cells via Electrochemical Impedance Spectroscopy. Analytical Chemistry, 90 (10). pp. 6116-6123. ISSN 0003-2700

Jumhur, A. A. and Mahmood, N. H. N. and Muchdie, M. (2017) Innovation strategy of small industry batik in competitive advantage. Advanced Science Letters, 23 (11). pp. 10871-10874. ISSN 1936-6612

Junaidi, N. A. and Suwa, T. (2016) Solar-powered adsorption refrigeration cycle optimization. Jurnal Teknologi, 78 (5-8). pp. 101-107. ISSN 0127-9696

Junin, Radzuan (1987) Bentonit: Minerologi, sifat-sifat dan kegunaannya. Buletin FKKKSA, 1 (1). p. 31. ISSN 0128-0740

Junin, Radzuan (1994) Disposal of oily cuttings by downhole fracturing injections: slurry product specifications issues. Buletin FKKKSA, 8(1) . pp. 1-6. ISSN 0128-0740

Junin, Radzuan and Abdul Karim, Khairuddin (1992) Bentonit Lahad Datu, Sabah: mineralogi, sifat-sifat fiziko-kimia dan potensinya sebagai tanah peluntur. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-8.

Junin, Radzuan and Hall, S. T. and Waller, M. D. (1996) Transport properties of slurries in simulated fracture channels. Proceedings Swemp '96 . pp. 579-586.

Jusoh, Norhana and Azri, Amirul and Amir Hussein, Muhammad Husaini and Khair, Azizul Hakim and Abdul Samad, Adlisa and Aminnudin, Tariq Muhammad and Amsan, Azureen Naja and Abd. Shukor, Muhammad Syahmi Hafizi and Mohd. Noor, Auni Nurhaziqah (2022) CFD simulation on permeability of porous scaffolds forhuman skeletal system. Journal of Human Centered Technology, 1 (2). pp. 39-47. ISSN 2821-3467

Jusoh, Samsiah and Zakaria, Zuriati and Ahmad, Fasihuddin and Din, Laily (2015) Isolation and characterization of styryllactone of goniothalamus ridleyi. Sains Malaysia, 44 (3). pp. 365-370. ISSN 1266-039

K. J. MANLEY, K. J. MANLEY and J. MARCEAU, J. MARCEAU (2001) A REVIEW OF NEW BUSINESS EMERGENCE IN THE BUILDING AND CONSTRUCTION SECTOR AND RECENT AUSTRALIAN EXPERIENCE. Jurnal Teknologi B, 35 (B). pp. 13-22. ISSN 0127-9696

Kadir, N. A. A. and Wahid, M. H. A. and Lokman, M. Q. and Irawati, N. and Hamzah, A. and Harun, S. W. (2020) Side-polished optical fiber structure for sodium nitrate sensor. IEEE Sensors Journal, 20 (11). pp. 5929-5934. ISSN 1530-437X

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2017) Statistical analysis of electromagnetic radiation for stroke patients and non-stroke participants. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-4). pp. 55-59. ISSN 2180-1843

Kadir, Z. A. and Mohammad, R. (2017) Risk assessment of human risk factors in port accidents. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 535-551. ISSN 0976-6340

Kadir, Z. A. and Mohammad, R. and Othman, N. and Amrin, A. and Muhtazaruddin, M. N. and Abu Bakar, S. H. and Muham, F. (2020) Risk management framework for handling and storage of cargo at major ports in Malaysia towards port sustainability. Sustainability (Switzerland), 12 (2). ISSN 2071-1050

Kadir, Z. A. and Mohammad, R. and Othman, N. and Chelliapan, S. and Amrin, A. (2017) Review on risk, risk assessment techniques, guidelines and framework in port safety. International Journal of Mechanical Engineering and Technology (IJMET), 8 (11). pp. 812-838. ISSN 0976-6340

Kaha, Marshila and Iwamoto, Koji and Nurul Ashyikin, Yahya and Suhaimi, Noraiza and Sugiura, Norio and Hara, Hirofumi and Othman, Nor’Azizi and Zakaria, Zuriati and Suzuki, Kengo (2021) Enhancement of astaxanthin accumulation using black light in Coelastrum and Monoraphidium isolated from Malaysia. Scientific Reports, 11 (1). p. 11708. ISSN 2045-2322

Kaidi, H. M. and Ahmad, N. and Hashim, N. F. M. and Salim, F. and Muhtazaruddin, M. N. and Mohamed, N. and Musa, R. and Aris, S. A. M. and Jalil, S. Z. A. (2019) Engaging youths in skill development through network system wiring workshop in rural area. Indonesian Journal of Electrical Engineering and Computer Science, 16 (2). pp. 950-955. ISSN 2502-4752

Kalantari, K. and Afiffi, A. M. and Salleh, A. and Mohamad, E. N. and Izadiyan, Z. (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/ chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kalantari, Katayoon and Afifi, Amalina Muhammad and Bayat, Saadi and Shameli, Kamyar and Yousefi, Samira and Mokhtar, Norrashidah and Kalantari, Alireza (2016) Heterogeneous catalysis in 4-nitrophenol degradation and antioxidant activities of silver nanoparticles embedded in tapioca starch. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Kalantari, Katayoon and Afiffi, Amalina M. and Salleh, Ariesman and Mohamad, Edzrol Niza and Izadiyan, Zahra (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kamal, Muhammad Nabil Farhan and Ishak, Izuan Amin and Darlis, Nofrizalidris and Mohd. Maruai, Nurshafinaz and Jamian, Rahim and Abd. Rashid, Razlin and Norafzanizam, Samiran and Mat Hassan, Nik Normunira (2022) Flow structure characteristics of the simplified compact car exposed to crosswind effects using CFD. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (1). pp. 56-66. ISSN 2462-1943

Kamal Baharin, Nur Syahirah and Koesoemadinata, Vidya Cundasari and Nakamura, Shunsuke and Azman, Nadia Farhana and Muhammad Yuzir, Muhamad Ali and Md. Akhir, Fazrena Nadia and Iwamoto, Koji and Yahya, Wira Jazair and Othman, Nor’azizi and Ida, Tamio and Hara, Hirofumi (2022) Production of Bio-Coke from spent mushroom substrate for a sustainable solid fuel. Biomass Conversion and Biorefinery, 12 (9). pp. 4095-4104. ISSN 2190-6815

Kamaludin, R. and Othman, M. H. D. and Kadir, S. H. S. A. and Rahman, M. A. and Jaafar, J. (2017) The morphological properties study of photocatalytic TiO2/PVDF dual layer hollow fiber membrane for endocrine disrupting compounds degradation. Malaysian Journal of Analytical Sciences, 21 (2). pp. 426-434. ISSN 1394-2506

Kamarazaman, Nadzirah and Ibrahim, Roslina and C. M. Yusoff, Rasimah and M. Zainudin, Norziha M. and Yaacob, Suraya and Yahya, Yazriwati and R. Azami, Husna Hafiza (2021) Mobile educational games for learning Sirah Nabi: development and usability evaluation. UMRAN - International Journal of Islamic and Civilizational Studies, 8 (3). pp. 107-121. ISSN 2289-8204

Kamardin, Kamilia and Azizan, Azizul and Olatoye, Taiwo Mustapha and Maidin, Siti Nurhafizza and Alnahari, Abdulqudos and Abd. Aziz, Nur Syazarin Natasha and Panatik, Kamarul Zaman (2018) The important role of system engineering for yacht engineering. Open International Journal of Informatics (OIJI), 6 (3). pp. 53-66. ISSN 2289-2370

Kamardin, Kamilia and Mad Kaidi, Hazilah and Mohd. Sam, Suriani and Rajandran, Deepa and Maidi, Siti Nurhafizza (2018) Development of remote monitoring system for hypertension/hypotension patients using AES algorithm. Open International Journal of Informatics (OIJI), 6 (3). pp. 43-52. ISSN 2289-2370

Kamaruddin, Kamarulzaman and Md. Illias, Rosli and Abdul Aziz, Suriani and Said, Mamot and Hassan, Osman (2005) Effects of buffer properties on cyclodextrin glucanotransferase reactions and cyclodextrin production from raw sago (cycas revoluta) starch. Biotechnology and Applied Biochemistry, 41 . pp. 117-125. ISSN 0885-4513

Kamaruddin, Rabiatul Adawiyah Azian and Mohd. Ibrahim, Imran and Al-Gburi, Ahmed Jamal Abdullah and Zakaria, Zahriladha and Shairi, Noor Azwan and Abdul Rahman, Tharek and Purnamirza, Teddy (2021) Return loss improvement of radial line slot array antennas on closed ring resonator structure at 28 GHz. Przeglad Elektrotechniczny, 97 (5). pp. 65-69. ISSN 0033-2097

Kamaruddin, Samira Albati and Mustafa, M. Bob and Wan Ishak, Wan Mohd Faizal and Ngien, Su Kong and Motasem, Alazaiza Y. D. (2017) Assessment of the behaviour of soil structure in double-porosity kaolin media using light transmission visualization (LTV) method. International Journal of Geotechnical Engineering, 11 (3). pp. 316-320. ISSN 1938-6362

Kamarudin, Khairul Hisyam and Ngah, Ibrahim and Abd. Wahid, Siti Nurhuda and Razak, Khamarrul Azahari (2015) Readiness of Orang Asli communities in Royal Belum-Temengor forest complex, Perak towards sustainable Eco-culture tourism (ECT) programme. Journal Of Human Capital Development, 8 (1). pp. 59-72. ISSN 1985-7012

Kamarudin, M. S. and Zulkeflee, M. and Padzillah, M. H. (2017) Effect of tip clearance on the flow field of the mixed flow turbocharger turbine. Jurnal Teknologi, 79 (7-3). pp. 97-103. ISSN 0127-9696

Kamarudin, Mohd. Hider and Ismail, Zool Hilmi and Saidi, Noor Baity (2021) Deep learning sensor fusion in plant water stress assessment: A comprehensive review. Applied Sciences (Switzerland), 11 (4). pp. 1-20. ISSN 2076-3417

Kamaruzaman, Nursyuhada’ and Mohd. Shadzalli, Zahrul Faizi and Abdul Manaf, Norhuda (2022) Waste-energy-climate nexus perspective towards circular economy: A mini-review. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26 (1). pp. 31-41. ISSN 2462-1943

Kamarzaman, Nazima and Mad Kaidi, Hazilah and Mohd. Noor, Norliza and Muhtazaruddin, Mohd. Nabil (2020) Analysis of network inventory issue in telco company. Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 42-46. ISSN 2462-1935

Kamis, S. L. and Yee, T. M. and Akasaka, H. and Ohtake, N. (2020) Wear behavior of non-hydrogenated and hydrogenated dlc films under protein lubricated condition. Jurnal Tribologi, 25 . pp. 136-145. ISSN 2289-7232

Kamis, Shahira Liza and Che Lah, Mohd. Amirul and Rahama, Nuratika Shaheera and Abd. Rahim, Nor Ashwani (2021) Fabrication and tribological characterization of aluminium alloy by using photochemical machining. Jurnal Tribologi, 28 (NA). pp. 82-95. ISSN 2289-7232

Kamis, Azmi (1992) Cost of corrosion. Buletin FKKKSA, 6 (2). pp. 12-15. ISSN 0128-0740

Kamsah, Mohd Zaki (1993) Simulation and multimedia in chemical engineering. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-3.

Kamsah, Mohd Zaki (1990) Types of biochemical reactors. Buletin FKKKSA, 4 (1). pp. 29-35. ISSN 0128-0740

Kamsah, Mohd Zaki (1992) Computer aided process engineering (CAPE). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-3.

Kamsani, Noratiqah and Kamsani, Noratiqah and Md. Salleh, Madihah and Basri, Siti Aisyah and Mohamad, Shaza Eva and Abd. Aziz, Suraini and Kamaruddin, Kamarulzaman (2018) Effects of Surfactant on the Enzymatic Degradation of Oil Palm Empty Fruit Bunch (OPEFB). Waste and Biomass Valorization, 9 (5). pp. 845-852. ISSN 1872641

Kamyab, H. and Lee, C. T. and Chelliapan, S. and Khademi, T. and Talaiekhozani, A. and Rezania, S. (2019) Role of microalgal biotechnology in environmental sustainability-a mini review. Chemical Engineering Transactions, 73 . pp. 451-456. ISSN 2283-9216

Kamyab, Hesam and Chelliapan, Shreeshivadasan and Tavakkoli, Omid and Mesbah, Mohsen and Bhutto, Javed Khan and Khademi, Tayebeh and Kirpichnikova, Irina and Ahmad, Akil and ALJohan, Anas Ayesh (2022) A review on carbon-based molecularly-imprinted polymers (CBMIP) for detection of hazardous pollutants in aqueous solutions. Chemosphere, 308 (NA). pp. 1-11. ISSN 0045-6535

Kanniah, S. L. and Mahrin, M. N. (2017) Influential factors affecting secure software development implementation at public service organization: an exploratory study. Advanced Science Letters, 23 (9). pp. 9157-9162. ISSN 1936-6612

Karamizadeh, S. and Abdullah, S. M. and Shayan, J. and Mazdak, Z. and Nooralishahi, P. (2017) Taxonomy of filtering based illumination normalization for face recognition. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 135-139. ISSN 2180-1843

Karamizadeh, S. and Abdullah, S. M. and Shayan, J. and Nooralishahi, P. and Bagherian, B. (2017) Threshold based skin color classification. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 131-134. ISSN 2180-1843

Karim, M. E. and Munir, A. B. and Karim, M. A. and Muhammad-Sukki, F. and Abu-Bakar, S. H. and Sellami, N. and Bani, N. A. and Hassan, M. Z. (2018) Energy revolution for our common future: An evaluation of the emerging international renewable energy law. Energies, 11 (7). ISSN 1996-1073

Karim, Md. Ershadul and Munir, Abu Bakar and Reza, Ahmed Wasif and Muhammad-Sukki, Firdaus and Mohd. Yasin, Siti Hajar and Abu-Bakar, Siti Hawa and Rahim, Ruzairi Abdul (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting and Social Change, 92 . pp. 168-181. ISSN 0040-1625

Karim, Mohammad Ershadul and Karim, Ridoan and Islam, Md. Toriqul and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Muhtazaruddin, Mohd. Nabil (2019) Renewable energy for sustainable growth and development: An evaluation of law and policy of Bangladesh. Sustainability (Switzerland), 11 (20). p. 5774. ISSN 2071-1050

Karim, N. A. and Ludin, N. A. and Mat-Teridi, M. A. and Sepeai, S. and Ibrahim, M. A. and Kouhnavard, M. and Sopian, K. and Arakawa, H. (2018) Effects of deposition time on of cobalt sulfide thin film electrode formation. Malaysian Journal of Analytical Sciences, 22 (1). pp. 80-86. ISSN 1394-2506

Karim, R. and Karim, M. E. and Muhammad Sukki, F. and Abu-Bakar, S. H. and Bani, N. A. and Munir, A. B. and Kabir, A. I. and Ardilam Rey, J. A. and Mas'Ud, A. A. (2018) Nuclear energy development in Bangladesh: A study of opportunities and challenges. Energies, 11 (7). ISSN 1996-1073

Karim, R. and Muhammad-Sukki, F. and Karim, M. E. and Munir, A. B. and Mohammad Sifat, I. and Abu-Bakar, S. H. and Bani, N. A. and Muhtazaruddin, M. N. (2018) Legal and regulatory development of nuclear energy in Bangladesh. Energies, 11 (10). ISSN 1996-1073

Karim, Ridoan and Muhammad Sukki, Firdaus and Hemmati, Mina and Md. ShahNewaz, Md. ShahNewaz and Farooq, Haroon and Muhtazaruddin, Mohd. Nabil and Muhammad Zulkipli, Muhammad Zulkipli and Ardila Rey, Jorge Alfredo (2020) Paving towards strategic investment decision: A SWOT analysis of renewable energy in Bangladesh. Sustainability (Switzerland), 12 (24). pp. 1-30. ISSN 2071-1050

Karimi, H. and Rahmani, R. and Ahmadi, M. T. and Ismail, R. (2016) Modelling effective charge density in graphene-gased DNA sensor. Science of Advanced Materials, 8 (6). pp. 1187-1194. ISSN 1947-2935

Karimi, Hediyeh and Rahmani, Rasoul and Othman, Mohd Fauzi and Zohoori, Bahareh and Mahrami, Mohsen and Kamyab, Hesam and Hosseini, Seyed Ebrahim (2016) An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks. Plasmonics, 11 (1). pp. 95-102.

Karn Tanavarotai, Karn Tanavarotai and Kamyab, Hesam and Nor Anuar, Aznah and Khademi, Tayebeh and Ali, Yuzir and Ashokkumar, Veeramuthu and Rezania, Shahabaldin (2022) Storage and reactivation of aerobic granular sludge: A review. Fuel, 330 (NA). pp. 1-14. ISSN 0016-2361

Kaur, J. and Kuwano, N. and Jamaludin, K. R. and Mitsuhara, M. and Saito, H. and Hata, S. and Suzuki, S. and Miyake, H. and Hiramatsu, K. and Fukuyama, H. (2016) Electron microscopy analysis of microstructure of postannealed aluminum nitride template. Applied Physics Express, 9 (6). ISSN 1882-0778

Kavalela, Ester Ndaxuwelao Ndaimbwehafo and Chelliapan, Shreeshivadasan and Kamyab, Hesam (2019) Evaluation of awareness and safety among students and technicians in UTM research chemical laboratories. Journal of Advanced Research in Occupational Safety and Health, 5 (1). pp. 1-8. ISSN 2637-0255

Kavianpour, Sanaz and Shanmugam, Bharanidharan and Azam, Sami and Zamani, Mazdak and Samy, Ganthan Narayana and De Boer, Friso (2019) A systematic literature review of authentication in internet of things for heterogeneous devices. Journal of Computer Networks and Communications, 2019 . p. 5747136. ISSN 2090-7141

Kayed , Ahmad and Colomb, Robert M. (2005) Using BWW model to evaluate building ontologies in CGs formalism. Information Systems, 30 . pp. 379-398. ISSN 03064379

KEVIN NEWHOUSE, KEVIN NEWHOUSE (2001) A PERFORMANCE-BASED BUILDING CODE IN USE. Jurnal Teknologi B, 35 (B). pp. 1-12. ISSN 0127-9696

Khadijah, S. M. P. and S. Liza, S. Liza and Shahemi, N. and Merican, A. M. and Abbas, A. A. and Ayob, K. A. (2020) Surface analysis of retrieved bilateral UHMWPE tibial inserts under varus malalignment condition. Engineering Failure Analysis, 118 . p. 104850. ISSN 1350-6307

Khair, Khalid and Mohamed, Zainai and Mohammad, Roslina and Farouk, Hazir and Ahmed, Mohammed E. (2018) A management framework to reduce delays in road construction projects in Sudan. Arabian Journal for Science and Engineering, 43 (4). pp. 1925-1940. ISSN 2193-567X

Khairunnisa, M. P. and Faizal, F. and Miyazawa, E. and Masuda, K. and Tsukada, M. and Lenggoro, I. W. (2021) Detachment of submicron particles from substrates using the suspension-assisted ultrasonic method. Journal of Chemical Engineering of Japan, 54 (4). ISSN 0021-9592

Khalajabadi, S. Z. and Abu, A. B. H. and Ahmad, N. and Yajid, M. A. M. and Redzuan, N. B. and Nasiri, R. and Haider, W. and Noshadi, I. (2018) Bio-corrosion behavior and mechanical characteristics of magnesium-titania-hydroxyapatite nanocomposites coated by magnesium-oxide flakes and silicon for use as resorbable bone fixation material. Journal of the Mechanical Behavior of Biomedical Materials, 77 . pp. 360-374. ISSN 1751-6161

Khalajabadi, Shahrouz Zamani and Abu, Aminudin and Ahmad, Norhayati and Kadir, Mohammed Rafiq Abdul and Ismail, Ahmad Fauzi and Nasiri, Rozita and Haider, Waseem and Redzuan, Norizah (2017) Biodegradable Mg/HA/TiO2 Nanocomposites Coated with MgO and Si/MgO for Orthopedic Applications: A Study on the Corrosion, Surface Characterization, and Biocompatability. COATINGS, 7 (10).

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) An alternative approach of leakage detection in Underground Storage Tank. Journal of Engineering and Applied Sciences, 12 (9). pp. 2347-2351. ISSN 1816-949X (In Press)

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) Understanding perception of fire risk from petrol station's workers. Journal of Engineering and Applied Sciences, 12 (9). pp. 2352-2360. ISSN 1816-949X

Khalid, Marzuki and R., Yusof and R., Abdul Rahman (2010) Fault detection and diagnosis for process control rig using artificial intelligent. ICIC Express Letters, 4 (5 B). 1811 -1812. ISSN 1881-803X

Khalid, Mohd. Shamsuri and Songip, Ahmad Rahman and Abu Bakar, Nooh and Musri, Mohtar (2015) An evolution of risk assessment tools in petrol station: a review. Asian Journal Of Applied Sciences, 3 (4). pp. 814-821. ISSN 2321-0893

Khalid, Waqas and Ahmad Zaki, Sheikh and Rijal, Hom Bahadur and Yakub, Fitri (2018) Thermal comfort requirements for different occupants in Malaysian hospital in-patient wards. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1). pp. 128-140. ISSN 2289-7879 (In Press)

Khamis, N. and Selamat, H. and Ismail, F. S. and Lutfy, O. F. (2019) Optimal exit configuration of factory layout for a safer emergency evacuation using crowd simulation model and multi-objective artificial bee colony optimization. International Journal of Integrated Engineering, 11 (4). pp. 183-191. ISSN 2229-838X

Khamis, N. and Selamat, H. and Ismail, F. S. and Lutfy, O. F. and Haniff, M. F. and Nordin, I. N. A. M. (2020) Optimized exit door locations for a safer emergency evacuation using crowd evacuation model and artificial bee colony optimization. Chaos, Solitons and Fractals, 131 . ISSN 0960-0779

Khan, Muhammad Jamshed and Kumari, Suriya and Shameli, Kamyar and Selamat, Jinap and Sazili, Awis Qurni (2019) Green synthesis and characterization of pullulan mediated silver nanoparticles through ultraviolet irradiation. Materials, 12 (15). p. 2382. ISSN 1996-1944

Khan, Muhammad Jamshed and Shameli, Kamyar and Sazili, Awis Qurni and Selamat, Jinap and Kumari, Suriya (2019) Rapid green synthesis and characterization of silver nanoparticles arbitrated by curcumin in an alkaline medium. Molecules, 24 (4). p. 719. ISSN 1420-3049

Khan, S. R. M. and Noozaei, J. and Kadir, M. R. A. and Waleed, A. M. T. and Jaafar, M. S. (2007) UPV method for strength detection of high performance concrete. Structural Survey, 25 (1). pp. 61-73. ISSN 0263-080X

Khan, Shawal and Khan, Shahzad and Zareei, Mahdi and Alanazi, Faisal and Kama, Nazri and Anjum, Adeel (2021) ABKS-PBM: Attribute-based keyword search with partial bilinear map. IEEE Access, 9 . pp. 46313-46324. ISSN 2169-3536

Khan, Sohrab and Ab. Rahim, Nor Zairah and Maarop, Nurazean (2019) A review on antecedents of citizen’s trust in government social media services. 3C Tecnologia (Si). pp. 109-120. ISSN 2254-4143

Khandanlou, R. and Fard Masoumi, H. R. and Ahmad, M. B. and Shameli, K. and Basri, M. and Kalantari, K. (2016) Enhancement of heavy metals sorption via nanocomposites of rice straw and Fe3O4 nanoparticles using artificial neural network (ANN). Ecological Engineering, 91 . pp. 249-256. ISSN 0925-8574

Khandanlou, Roshanak and Ahmad, Mansor and Masoumi, Hamid Reza Fard and Shameli, Kamyar and Basri, Mahiran and Kalantari, Katayoon (2015) Rapid adsorption of copper(ii) and lead(ii) by rice straw/fe3o4 nanocomposite: optimization, equilibrium isotherms, and adsorption kinetics study. Plos One, 10 (3). ISSN 1932-6203

Khandelwal, Manoj and Marto, Aminaton and Fatemi, Seyed Alireza and Ghoroqi, Mahyar and Armaghani, Danial Jahed and Singh, T. N. and Tabrizi, Omid (2018) Implementing an ANN model optimized by genetic algorithm for estimating cohesion of limestone samples. Engineering with Computers, 34 (2). pp. 307-317. ISSN 0177-0667

Kheirkhah, Atabak and Mohd. Daud, Salwani and Ahmad @ Salleh, Noor Azurati and Mohd. Sam, Suriani and Abas, Hafiza and Shariff, Sya Azmeela and Md. Yusof, Yusnaidi (2016) Some intriguing high-throughput DNA sequence variants prediction over protein functionality. Jurnal Teknologi, 78 (42525). pp. 1-6. ISSN 0127-9696

Khieng, C. and Triyono, M. B. and Minghat, A. D. (2019) How to survive selling scoreboard. International Journal of Recent Technology and Engineering, 8 (2). pp. 669-673. ISSN 2277-3878

Khoo, V. Ching and Dolah, Rozzeta and Haron, Habibah @ Norehan and Ramlie, Faizir and Hassan, Mohamad Z. (2020) Comprehensive multisite efficiency equation for semiconductor test equipment. Journal of Engineering Science and Technology, 15 (6). pp. 3971-3982. ISSN 1823-4690

Khor, K. X. and Chin, P. J. H. and Yeong, C. F. and Su, E. L. M. and Narayanan, A. L. T. and Abdul Rahman, H. and Khan, Q. I. (2017) Portable and reconfigurable wrist robot improves hand function for post-stroke subjects. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 25 (10). pp. 1864-1873. ISSN 1534-4320

Khoshnoodi, Mohammad (1995) Application of ASPEN PLUS in combustion modeling. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C4-1.

Khudzari, Zahran and Richens, D. and Tansley, G. D. (2010) CIMS balloon pump : A Novel Left Ventricle Assist Device (LVAD). International Journal of Artificial Organs, 33 (7). 473 - 473.

Kim, Soyeon and Mori, Izumi and Abdul Rahim, Abd. Rahman (2018) Cultural values matter: Attractiveness of Japanese companies in Malaysia. International Journal of Cross Cultural Management, 18 (1). pp. 87-103. ISSN 1470-5958

Kobayashi, Akira (2015) Application of advanced plasma technology to energy materials and environmental problems. NATIONAL PHYSICS CONFERENCE 2014 (PERFIK 2014), 1657 . ISSN 0094-243X

Kobayashi, Akira and Afrasiabi, Abbas (2015) A survey of microstructure and phase analysis from metal oxides at the bond coat/ysz interface after thermal shocks. Frontier Of Applied Plasma Technology, 8 (1). pp. 37-40. ISSN 1883-5589

Kobayashi, Akira and Yugeswaran, S. and Lusvarghi, L. and Mostaghimi, J. (2015) Preparation of glass ceramic by transferred arc plasma torch. Frontier Of Applied Plasma Technology, 8 (2). pp. 69-74. ISSN 1183-5589

Koesoemadinata, V. C. and Chou, K. and Baharin, N. S. K. and Yahya, W. J. and Yuzir, M. A. M. and Md. Akhir, F. M. and Iwamoto, K. and Hata, S. and Aid, S. R. and Othman, N. and Ida, T. and Murakami, Y. and Hara, H. (2021) The effectiveness of biological pretreatment of oil palm empty fruit bunch on its conversion into bio-coke. Bioresource Technology Reports, 15 . ISSN 2589-014X

Komaro, M. and Suherman, A. and Ariyano, Ariyano and Pangestu, R. and Minghat, A. D. (2020) Development of interactive multimedia to overcome difficulties in isomorphous binary phase diagram learning materials. International Journal of Advanced Science and Technology, 29 (7). pp. 284-289. ISSN 2005-4238

Kong, Calvin Leng Sing and Lim, Jeng Shiun and Walmsley, Timothy Gordon and Liew, Peng Yen and Goto, Masafumi (2021) Stagnation and solar fraction analysis on solar thermal integration in Southeast Asia. Process Integration and Optimization for Sustainability, 5 (2). pp. 257-268. ISSN Springer

Koopialipoor, Mohammadreza and Armaghani, Danial Jahed and Hedayat, Ahmadreza and Marto, Aminaton and Gordan, Behrouz (2019) Applying various hybrid intelligent systems to evaluate and predict slope stability under static and dynamic conditions. Soft Computing, 23 (14). pp. 5913-5929. ISSN 1432-7643

Koopialipoor, Mohammadreza and Tootoonchi, Hossein and Marto, Aminaton and Faizi, Koohyar and Armaghani, Danial Jahed (2020) Various effective factors on peak uplift resistance of pipelines in sand: a comparative study. International Journal of Geotechnical Engineering, 14 (7). pp. 820-827. ISSN 1938-6362

Koshiba, Y. and Hoshina, T. A. and Okada, M. and Tsuji, T. and Hiaki, T. (2018) Bubble point pressure and some dielectric properties of propane + ethanol liquid mixture at 303.2 K. Kagaku Kogaku Ronbunshu, 44 (4). pp. 223-238. ISSN 0386-216X

Koshiba, Y. and Hoshina, T. A. and Okada, M. and Tsuji, T. and Hiaki, T. (2018) Bubble Point Pressure and Some Dielectric Properties of Propane plus Ethanol Liquid Mixture at 303.2 K. Kagaku Kogaku Ronbunshu, 44 (4). pp. 223-238. ISSN 0386-216X

Kouhnavard, M. and Ahmad Ludin, N. and Vazifehkhah Ghaffari, B. and Sopian, K. and Abdul Karim, N. and Miyake, M. (2016) An efficient metal-free hydrophilic carbon as a counter electrode for dye-sensitized solar cells. International Journal of Photoenergy, 2016 . ISSN 1110-662X

Kouhnavard, M. and Ludin, N. A. and Ghaffari, B.V. and Ikeda, S. and Sopian, K. and Miyake, M. (2016) Hydrophilic carbon/TiO2 colloid composite: a potential counter electrode for dye-sensitized solar cells. Journal of Applied Electrochemistry, 46 (2). pp. 259-266. ISSN 0021-891X

Kouhnavard, Mojgan and Ludin, Norasikin Ahmad and Ghaffari, Babak V. and Sopian, Kamarozzaman and Ikeda, Shoichiro (2015) Carbonaceous Materials and Their Advances as a Counter Electrode in Dye-Sensitized Solar Cells: Challenges and Prospects. Chemsuschem, 8 (9). pp. 1510-1533. ISSN 1860-949X

Kow, Mee Yee and Lim, Teck Loon and Abu Bakar, Nooh and Yip, M. W. (2015) A case study: maturity assessment of product lifecycle management (PLM) implementation in Malaysia automotive components manufacturing company. International Journal Of Innovative Computing, 5 . pp. 1-4. ISSN 2180-4370

Krishna, L. S. and Yuzir, A. and Yuvaraja, G. and Ashokkumar, V. (2017) Removal of Acid Blue25 from aqueous solutions using Bengal gram fruit shell (BGFS) biomass. International Journal of Phytoremediation, 19 (5). pp. 431-438. ISSN 1522-6514

Krishnan, S. and Magalingam, P. and Ibrahim, R. (2021) Hybrid deep learning model using recurrent neural network and gated recurrent unit for heart disease prediction. International Journal of Electrical and Computer Engineering, 1 (6). ISSN 2088-8708

Kumar, Jayapalan Senthil and Anuar, Syahid and Hassan, Noor Hafizah (2022) Transfer learning based performance comparison of the pre-trained deep neural networks. International Journal of Advanced Computer Science and Applications, 13 (1). pp. 797-805. ISSN 2158-107X

Kumarasinghe, Tisara and Krejcar, Ondrej and Selamat, Ali and Mat Dawi, Norazryana and Herrera-Viedma, Enrique and Frischer, Robert and Namazi, Hamidreza (2021) Complexity-based evaluation of the correlation between heart and brain responses to music. Fractals, 29 (6). pp. 1-13. ISSN 0218-348X

Kumaresan, Sivakumar and Sarmidi, Mohamad Roji (2003) A preliminary study into the effect of processing on Eurycoma longifolia water extract yield. Proceedings of International Conference on Chemical and Bioprocess Enginering, 2 . pp. 750-754.

Kurniasih, Dwi and Jasmi, Kamarul Azmi and Basiron, Bushrah and Huda, Miftachul and Maseleno, Andino (2018) The Uses of Fuzzy Logic Method for Finding Agriculture and Livestock Value of Potential Village. International Journal of Engineering & Technology, 7 (3). pp. 1091-1095. ISSN 2227-524X

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Dual effects of supported W catalysts for dehydroaromatization of methane in the absence of oxygen. Catalysis Letters, 102 (1-2). pp. 69-78. ISSN 1011-372X

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Production of gasoline range hydrocarbons from catalytic reaction of methane in the presence of ethylene over W/HZSM-5. Catalysis Today, 106 . pp. 271-274. ISSN 0920-5861

Kuwano, N. and Horikami, S. and Linas, M. (2015) Electron microscopy study of grain boundary behavior in Pb-free solder materials for mitigation of whiskers. Materials Science Forum, 827 . pp. 341-346. ISSN 0255-5476

Kuwano, Noriyuki and Kaur, Jesbains and Siti Rahmah, Siti Rahmah (2019) Electron microscopy determination of crystallographic polarity of aluminum nitride thin films. Micron, 116 . pp. 80-83. ISSN 0968-4328

Lai, A. J. X. and Tsuji, T. and Tan, L. S. and Bharath, R. and Hoshina, T. and Funazukuri, T. (2021) Argon gas solubility in styrene and nitrogen, oxygen and argon gas solubilities in methyl methacrylate at (293 to 313) K and at pressures up to 3.8 MPa. Journal of Solution Chemistry, 50 (7). pp. 1008-1026. ISSN 0095-9782

Lai, Ping Yean and Ismail, Ahmad Fauzi (2001) Optimization of formation process in development of high performance of asymmetric membranes. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 133-137.

Lakkaboyana, Sivarama Krishna and Soontarapa, Khantong and Asmel, Nabel Kalel and Kumar, Vinay and Marella, Ravi Kumar and Yuzir, Ali and Wan Yaacob, Wan Zuhairi (2021) Synthesis and characterization of Cu(OH)2-NWs-PVA-AC Nano-composite and its use as an efficient adsorbent for removal of methylene blue. Scientific Reports, 11 (1). p. 5686. ISSN 2045-2322

Latif, K. A. and Mahmood, N. H. N. and Ali, N. R. M. (2020) Exploring sustainable human resource management change in the context of digital banking banking. Journal of Environmental Treatment Techniques, 8 (2). ISSN 2309-1185

Latiff, M. H. A. and Songip, Ahmad Rahman and Nasri, N. S. and Tutuk, D. K. (2004) The characterization of Ni-based catalysts for autothermal reforming process. Proceedings of 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-79.

Latifi, N. and Eisazadeh, A. and Marto, A. and Meehan, C. L. (2017) Tropical residual soil stabilization: A powder form material for increasing soil strength. Construction and Building Materials, 147 . pp. 827-836. ISSN 0950-0618

Latifi, N. and Vahedifard, F. and Ghazanfari, E. (2018) Sustainable improvement of clays using low-carbon nontraditional additive. International Journal of Geomechanics, 18 (3). ISSN 1532-3641

Lau, Bik Sing and Mohd. Ariff, Mohd. Farid and Razali, Ahmad Firdaus (2022) Comparison between AliceVision Meshroom and Pix4Dmapper software in generating three-dimensional (3D) photogrammetry. Journal of Advanced Geospatial Science & Technology, 2 (2). pp. 117-138. ISSN 2811-325X

Lau, Woei Jye and Ismail, Ahmad Fauzi and Misdan, Nurasyikin and Kassim, Mohd. Azraai (2012) A recent progress in thin film composite membrane: a review. Desalination, 287 . pp. 190-199. ISSN 0011-9164

Law, Poh Liyn and Ab. Ghani, Hadhrami and Roslim, Farah Najwa and Amir Hamzah, Nur Asyiqin and Mohammed, Saeed Mohammed Abdulghani and Abdul Aziz, Nor Hidayati and Abd. Aziz, Azlan and Tan, Kim Geok and Azizan, Azizul (2020) Ant-colony and nature-inspired heuristic models for noma systems: a review. Telkomnika (Telecommunication Computing Electronics and Control), 18 (4). pp. 1754-1761. ISSN 1693-6930

Le, Minh Quan and Kamyab, Hesam and Muhammad Yuzir, Muhamad Ali and Ashokkumar, Veeramuthu and Hosseini, Seyed Ehsan and Balasubramanian, Balamuralikrishnan and Kirpichnikova, Irina (2022) Review of the application of gasification and combustion technology and waste-to-energy technologies in sewage sludge treatment. Fuel, 316 (NA). pp. 1-22. ISSN 0016-2361

Lee, K. X. and Shameli, K. and Miyake, M. and Ahmad Khairudin, N. B. B. and Mohamad, S. E. B. and Hara, H. and Mad Nordin, M. F. B. and Yew, Y. P. (2017) Gold nanoparticles biosynthesis: a simple route for control size using waste peel extract. IEEE Transactions on Nanotechnology, 16 (6). pp. 954-957. ISSN 1536-125X

Lee, K. X. and Shameli, K. and Yew, Y. P. and Teow, S. Y. and Jahangirian, H. and Rafiee Moghaddam, R. and Webster, T. J. (2020) Recent developments in the facile bio-synthesis of gold nanoparticles (AuNPs) and their biomedical applications. International Journal of Nanomedicine, 15 . pp. 275-300. ISSN 1176-9114

Lee, Kar Xin and Shameli, Kamyar and Mohamad, Shaza Eva and Yew, Yen Pin and Mohamed Isa, Eleen Dayana and Yap, Hooi-Yeen and Lim, Wei Ling and Teow, Sin-Yeang (2019) Bio-mediated synthesis and characterisation of silver nanocarrier, and its potent anticancer action. Nanomaterials, 9 (10). pp. 1-19. ISSN 2079-4991

Lee, Kiat Moon and Quek, Joo Ding and Tey, Wah Yen and Lim, Steven and Kang, Hooi-Siang and Quen, Lee Kee and Wan Mahmood, Wan Adeebah and Sayed Jamaludin, Sharifah Iziuna and Teng, Kah Hou and Khoo, Kuan Shiong (2022) Biomass valorization by integrating ultrasonication and deep eutectic solvents: Delignification, cellulose digestibility and solvent reuse. Biochemical Engineering Journal, 187 (NA). pp. 1-8. ISSN 1369-703X

Lee, Muhammad Hisyam and Mohamed, Hazura and Sarahintu, Mazalan and Salleh, Shaharuddin and Sanugi, Bahrom (2009) Application of taguchi's design of experiment in performance analysis of destination sequence distance vector (DSDV) routing protocol in mobile ad hoc networks. Sains Malaysiana, 38 (3). pp. 423-428. ISSN 0126-6039

Lee, P. Y. and Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Klemeš, J. J. (2020) Total site heat and power integration for locally integrated energy sectors. Energy, 204 . ISSN 0360-5442

Leong, Mohd. Salman and Lim, Meng Hee (2013) Blades rubs and looseness detection in gas turbines - operational field experience and laboratory study. Journal of Vibroengineering, 15 (3). pp. 1311-1321. ISSN 1392-8716

Li, Bing and Huang, Wen Li and Zhang, Chao and Feng, Sisi and Zhang, Zhenya and Lei, Zhong Fang and Sugiura, Norio (2015) Effect of TiO2 nanoparticles on aerobic granulation of algal-bacterial symbiosis system and nutrients removal from synthetic wastewater. Bioresource Technology, 187 . pp. 214-220. ISSN 0960-8524

Li, Jieming and Shimizu, Kazuya and Akasako, Haruna and Lu, Zhijiang and Akiyama, Shohei and Goto, Masafumi and Utsumi, Motoo and Sugiura, Norio (2015) Assessment of the factors contributing to the variations in microcystins biodegradability of the biofilms on a practical biological treatment facility. Bioresource Technology, 175 . pp. 463-472. ISSN 0960-8524

Li, X. and Nia, A. B. and Ma, X. and Yahya, M. Y. and Wang, Z. (2017) Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation. Mechanics of Advanced Materials and Structures, 24 (2). pp. 114-121. ISSN 1537-6494

Liat Choon, Tan and Hussin, Khadijah (2012) Towards e-government’s 3D property. International Journal of Scientific And Engineering Research, 3 (3). pp. 106-114. ISSN 2229-5518

Liew, Chia Pao and Kiew, Peck Loo (2022) Sustainable assessment: The inevitable future of engineering curriculum. ASEAN Journal of Engineering Education, 6 (1). pp. 23-32. ISSN 2231-9433

Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Abdul Manan, Z. and Kleme\x9A, J. J. and Varbanov, P. S. (2016) Integrating district cooling systems in Locally Integrated Energy Sectors through Total Site Heat Integration. Applied Energy, 184 . pp. 1350-1363. ISSN 0306-2619

Liew, Syh Yeh and Kamsah, Mohd Zaki (2001) Web-based data exchange system in chemical process engineering. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 492-497.

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Lilo, Moneer Ali and Latiff, L. A. and Abu, Aminudin and Al Mashhadany, Yousif I. (2016) Vibration fault detection and classifaction based on the fft and fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4633-4637. ISSN 1819-6608

Lim, Chee Siang and Abdul Manan, Zainuddin and Sarmidi, Mohamad Roji (2003) Simulation modelling of the phase behaviour of palm oil with supercritical carbon dioxide. Proceeding of International Conference On Chemical and Bioprocess Engineering . pp. 427-434.

Lim, Bebianna Chean-Yiing and Yusuf, Sara Yasina and Jamian, Nor Ruwaida and Md. Kasmani, Rafiziana and Mohd. Rashid, Ammar and Naidu, Dewika and Wikurendra, Edza Aria and Fasya, Abdul Hakim Zakkiy (2022) A review on the effects of flame retardant additives towards the environment and human health. Biointerface Research in Applied Chemistry, 12 (6). pp. 7983-7993. ISSN 2069-5837

Lim, Soon Huat and Mohd. Noor, Norliza (2020) Machine learning application in predictive maintenance on an automation line. ARPN Journal of Engineering and Applied Sciences, 15 (23). pp. 2830-2838. ISSN 1819-6608

Lim, Teck Loon and Kow, Mee Yee and Abu Bakar, Nooh and Yip, M. W. (2015) Case studies in implementing dynamic production planning and scheduling system in make-to-order high-mix-low-volume small and medium-scaled industries for production efficiency. International Journal Of Innovative Computing Journal, 5 (1). pp. 5-8. ISSN 2180-4370

Lim, Wen Yao and Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Karri, Rama Rao and Khalid, Mohammad and Walvekar, Rashmi and Abdullah, Ezzat Chan and Mazari, Shaukat Ali and Ahmad, Awais and Dehghani, Mohammad Hadi (2022) Insight into immobilization efficiency of Lipase enzyme as a biocatalyst on the graphene oxide for adsorption of Azo dyes from industrial wastewater effluent. Journal of Molecular Liquids, 354 (118849). pp. 1-15. ISSN 0167-7322

Lim, Y. K. and Sarip, S. and Kaidi, H. M. and Rey, J. A. A. and Samsuddin, N. M. and Muhtazaruddin, M. N. and Sukki, F. M. and Aziz, S. A. (2021) Current status and possible future applications of marine current energy devices in Malaysia: a review. IEEE Access, 9 . ISSN 2169-3536

Lim, Yaik Wah and Iorakaa, Ayoosu Moses and Leng, Pau Chung and Saadatu Aminu, Saadatu Aminu and Terna, Aule Thomas and Abdurrahman, Abdurraheem Bello (2022) Tropical daylight availability and sky typologies for daylighting evaluation and design. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 157-170. ISSN 0128-178X

Lim, Yee Fang and Mohd. Azmi, Nurulhuda Firdaus and Yahya, Yazriwati and Sarkan, Haslina and Amir Sjarif, Nilam Nur and Chuprat, Suriayati (2018) Mobile business intelligence acceptance model for organisational decision making. Bulletin of Electrical Engineering and Informatics, 7 (4). pp. 650-656. ISSN 2089-3191

Lim, You Rang and Ariffin, Aini Suzana and Ali, Mazlan and Chang, Kuei Lun (2021) A hybrid MCDM model for live-streamer selection via the fuzzy Delphi method, ahp, and topsis. Applied Sciences (Switzerland), 11 (19). pp. 1-15. ISSN 2076-3417

Lim, Fang Yee and Abdul Manan, Zainuddin (2001) Development of a systematic technique for simultaneous reduction of energy and water in chemical process plants. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 477-483.

Lim, Kai Shin and Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2004) Structural and gas adsorption properties of cation exchanged zeolites. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-86.

Liu, W. H. and Wan Alwi, S. R. and Hashim, H. and Lim, J. S. and Mohammad Rozali, N. E. and Ho, W. S. (2016) Sizing of Hybrid Power System with varying current type using numerical probabilistic approach. Applied Energy, 184 . pp. 1364-1373. ISSN 0306-2619

Loh, Zhi Wei and Cheong, Wei Mun and Mohd. Zaid, Mohd. Hafiz and Awang Kechik, Mohd. Mustafa and Yap, Wing Fen and Mayzan, Mohd. Zul Hilmi and Yaakob, Yazid and Shahira Liza, Shahira Liza (2022) Development of fluoride-containing glass–ceramics using eggshells waste as calcium source. Applied Physics A: Materials Science and Processing, 128 (10). pp. 1-8. ISSN 0947-8396

Lokman, Muhammad Quisar and Mohd. Rusdi, Muhammad Farid and Rosol, Ahmad Haziq Aiman and Ahmad, Fauzan and Shafie, Suhaidi and Yahaya, Hafizal and Mohd. Rosnan, Rizuan and Abdul Rahman, Mohd. Azizi and Harun, Sulaiman Wadi (2021) Synthesis of silver nanoparticles using chemical reduction techniques for Q-switcher at 1.5 µm region. Optik, 244 (NA). pp. 1-9. ISSN 0030-4026

Lokman, Muhammad Quisar and Shaban, Suraya and Shafie, Suhaidi and Ahmad, Fauzan and Yahaya, Hafizal and Mohd. Rosnan, Rizuan and Ibrahim, Mohd. Adib (2021) Improving Ag-TiO2nanocomposites’ current density by TiCl4 pretreated on FTO glass for dye-sensitised solar cells. Micro and Nano Letters, 16 (7). pp. 381-386. ISSN 1750-0443

Lokman, N. A. and Ithnin, A. M. and Ramli, M. N. and Bahar, N. D. and Yahya, W. J. (2019) Effect of filtered palm oil mill effluent (pome) via close loop in-line microbubbles treatment chamber for biochemical oxygen demand (bod) treatment. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 10-19. ISSN 2289-7879

Loni, Reyhaneh and Najafi, Gholamhassan and Mamat, Rizalman and Ghazali, Mohd. Fairusham and Che Sidik, Nor Azwadi (2022) Nusselt number prediction for oil and water in solar tubular cavity receivers. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (2). pp. 157-174. ISSN 2289-7879

Lotf, E. A. and Jacob, M. V. and Ghassemi, H. and Zakeri, M. and Nasef, M. M. (2021) Highly conductive anion exchange membranes based on polymer networks containing imidazolium functionalised side chains. Scientific Reports20452322, 11 (1). ISSN 2045-2322

Lotfi, Hossein and Ali Azizivahed, Ali Azizivahed and Shojaei, Ali Asghar and Seyedi, Seyedalireza and Othman, Mohd. Fauzi (2022) Multi-objective distribution feeder reconfiguration along with optimal sizing of capacitors and distributed generators regarding network voltage security. Electric Power Components and Systems, 49 (6-7). pp. 652-668. ISSN 1532-5008

Lotfy, Eslam Reda and Zaki, Sheikh Ahmad and Harun, Zambri (2018) Modulation of the atmospheric turbulence coherent structures by mesoscale motions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (4). p. 178. ISSN 1678-5878

Lounis, Selma and Rebhi, Redha and Hadidi, Noureddine and Lorenzini, Giulio and Menni, Younes and Ameur, Houari and Che Sidik, Nor Azwadi (2022) Thermo-solutal convection of Carreau-Yasuda non-Newtonian fluids in inclined square cavities under Dufour and Soret impacts. CFD Letters, 14 (3). pp. 96-118. ISSN 2180-1363

Low, Sheau Ting and Ayu Primasari Andini, Ayu Primasari Andini (2022) Role of past behaviour in application of TPB in predicting energy saving behaviour: a review. Journal of Tourism, Hospitality and Environment Management (JTHEM), 7 (2). pp. 383-391. ISSN 0128-178X

M., Taher and Abdul Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji (2003) Insulin potentiating activity of cinnamomum extract on 3T3-L1 adipocytes. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 270-273.

M. A., Amiruddin and N. L., Jenat and M. H. C., Man and M. A., Irfan and N. A., Hambali and N., Fawazi and A. S., Nor Halim (2022) Simple and fast damage identification on 6061 aluminium based on mode shape curvature. Journal of Engineering Science and Technology, 17 (2). pp. 1036-1050. ISSN 1823-4690

M. B., Noremylia and Hassan, Mohamad Zaki and Ismail, Zarini (2022) Recent advancement in isolation, processing, characterization and applications of emerging nanocellulose: A review. International Journal of Biological Macromolecules, 206 (-). pp. 954-976. ISSN 0141- 8130

M. Idris, Khairulnizam and Setan, Halim (2009) Communication and database modules for automatic data acqusition. Geoinformation Science Journal , 9 (1). pp. 1-10. ISSN 1511-9491

M. Krishnasamy, K. T. and Mustakim, S. S. and Tham, J. H. and Minghat, A. D. and Sulaiman, T. (2020) An evaluation on the implementation of International General Certificate in Secondary Education (IGCSE) curriculum towards international assessment benchmark. International Journal of Advanced Science and Technology, 29 (9). pp. 981-991. ISSN 2005 - 4238

M. L., Nurul Hanira and Che Man, H. and Rashid, M. and Chuah, A. L. and Abdullah, A. M. (2017) Pre-treatment of ammonia-nitrogen (NH3 –N) removal from scheduled waste leachate by air stripping. Page 1 Desalination and Water Treatment, 68 . pp. 330-337. ISSN 1944-3994

M. Lehan, N. F. A. and Azahari, R. K. and Hisyam, K. K. (2020) Business continuity and resiliency planning in disaster prone area of Sabah, Malaysia. Disaster Advances, 13 (7). pp. 25-32. ISSN 0974-262X

M. Noor, N. and Roseli, A. F. and Dahlan, Z. and M. Kassim, R. and Yunus, A. and M. Rijal, O. (2019) Logistic regression scoring index for detection of interstitial lung disease. ARPN Journal of Engineering and Applied Sciences, 14 (5). ISSN 1819-6608

M. Noor, Norliza and Than, Joel C. M. and Rijal, Omar M. and M. Kassim, Rosminah and Yunus, Ashari and Zeki, Amir A. and Anzidei, Michele and Saba, Luca and Suri, Jasjit S. (2015) Automatic Lung Segmentation Using Control Feedback System: morphology and Texture Paradigm. Journal Of Medical Systems, 39 (3). p. 22. ISSN 0148-5598

M. Radzi, Nurnazifah and A. Latif, Amirah and Ismail, Mohammad F. and Liew, Josephine Y. C. and Awang, Noor A. and Lee, Han K. and Ahmad, Fauzan and Siti F. Norizan, Siti F. Norizan and Ahmad, Harith (2021) Tunable spacing dual-wavelength Q-switched fiber laser based on tunable FBG device. Photonics, 8 (12). pp. 1-11. ISSN 2304-6732

M. Saqr, Khalid and S. Aly, Hossam and A. Wahid, Mazlan and M. Sies, Mohsin (2009) Numerical simulation of confined vortex flow using a modified k-£ turbulence model. CFD Letters, 1 (2). pp. 87-94. ISSN 2180-1363

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2018) Eccentricity-based design procedure of confined columns under compression and in-plane bending moment. Measurement: Journal of the International Measurement Confederation, 129 . pp. 11-19. ISSN 0263-2241

Maarop, Nurazean and Mohammad, Roslina and Jamaludin, Rosmahaida and Mohd. Zainuddin, Norziha Megat and Masrom, Maslin and Nik Mohamed, Nik Nadzirah and Abu Bakar, Nur Azaliah (2022) MyQuran diary application development considering the proposed usability features. Open International Journal of Informatics, 10 (1). pp. 47-56. ISSN 2289-2370

Maarop, Nurazean and Thamadharan, Kavitha (2015) The acceptance of e-assessment considering security perspective: work in progress. International Science Index: Computer And Science Engineering, 9 (3). pp. 874-879. ISSN 1307-6892

Machmud, A. and Minghat, A. D. B. (2020) The price dynamics of hand sanitizers for covid-19 in Indonesia: exponential and cobweb forms. Indonesian Journal of Science and Technology, 5 (2). pp. 176-184. ISSN 2528-1410

Mad Kaidi, H. and Ahmad, N. and Mohd. Izhar, M. A. and Mohd. Sam, S. and Fisal, N. (2016) Irregular repetition code hybrid ARQ in wireless system. Jurnal Teknologi, 78 (6-2). pp. 1-6. ISSN 0127-9696

Mad Kaidi, Hazilah and Ahmad, Norulhusna and Dziyauddin, Rudzidatul Akmam and Mohamed, Norliza and Abdul Latiff, Liza and Usman, Sahnius and Ahmad, Robiah and Sarip, Shamsul (2020) Internet of things: a monitoring and control system for rockmelon farming. International Journal of Integrated Engineering, 12 (6). pp. 55-61. ISSN 2229-838X

Madam, A. and Yusof, R. (2016) Malaysian traffic sign dataset for traffic sign detection and recognition systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 137-143. ISSN 2180-1843

Madani, A. and Yusof, R. (2016) Traffic sign detection based on simple XOR and discriminative features. Jurnal Teknologi, 78 (6-2). pp. 97-102. ISSN 0127-9696

Madani, A. and Yusof, R. (2018) Traffic sign recognition based on color, shape, and pictogram classification using support vector machines. Neural Computing and Applications, 30 (9). pp. 2807-2817. ISSN 0941-0643

Madar, Mohamed and Subari, Mustafa Din and Baqutayan, Shadiya M. S. (2017) Inter-institutional Framework towards Improvising SDGs in Somaliland: The Transformative Paradigm. International And Multidisciplinary Journal Of Social Sciences-Rimcis, 6 (3). pp. 307-329. ISSN 2014-3680

Madhanagopal, J. and Singh, O. P. and Sornambikai, S. and Omar, A. H. and Sathasivam, K. V. and Fatihhi, S. J. and Abdul Kadir, M. R. (2017) Enhanced wide-range monotonic piezoresistivity, reliability of Ketjenblack/deproteinized natural rubber nanocomposite, and its biomedical application. Journal of Applied Polymer Science, 134 (25). ISSN 0021-8995

Maetouq, Ali and Mohd. Daud, Salwani and Ahmad, Noor Azurati and Maarop, Nurazean and Sjarif, Nilam Nur Amir and Abas, Hafiza (2018) Comparison of hash function algorithms against attacks: a review. International Journal of Advanced Computer Science and Applications, 9 (8). pp. 98-103. ISSN 2158-107X

Magalingam, Pritheega and Ibrahim, Roslina and Krishnan, Surenthiran (2018) Review on data analytics framework in heart disease. Open International Journal of Informatics (OIJI), 6 (4). pp. 42-53. ISSN 2289-2370

Magendran, S. S. and Khan, F. S. A. and Mubarak, N. M. and Khalid, M. and Walvekar, R. and Abdullah, E. C. and Nizamuddin, S. and Karri, R. S. (2019) Synthesis of organic phase change materials by using carbon nanotubes as filler material. Nano-Structures and Nano-Objects, 19 . ISSN 2352-507X

Mahandran, C. J. and Fatah, A. Y. A. and Bani, N. A. and Kaidi, H. M. and Muhtazaruddin, M. N,. and Amran, N. B. (2019) Thermal oxidation improvement in semiconductor wafer fabrication. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1141-1147. ISSN 2088-8694

Mahat, S. B. and Man, H. C. and Idris, A. M. and Kamal, A. M. M. and Abdullah, L. C. and Shreeshivadasan, C. (2021) Dynamic anaerobic membrane bioreactor DAnMBR) with phase separation for food processing wastewater treatment at mesophilic temperature: characterization of cake layer. Journal of Environmental Chemical Engineering, 9 (4). ISSN 2213-3437

Mahat, S. B. and Omar, R. and Che Man, H. and Md. Idris, A. I. and Mustapa Kamal, S. M. and Abdullah, L. C. and Shreeshivadasan, C. (2021) Dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation for food processing wastewater treatment at mesophilic temperature: Characterization of cake layer. Journal of Environmental Chemical Engineering, 9 (4). p. 105718. ISSN 2213-3437

Mahat, Siti Baizurah and Omar, R. and Che Man, H. and Mohamad Idris, A. I. and Mustapa Kamal, S. M. and Idris, A. and Shreeshivadasan, C. and Jamali, N. S. and Abdullah, L. C. (2021) Performance of dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation in treating high strength food processing wastewater. Journal of Environmental Chemical Engineering, 9 (3). p. 105245. ISSN 2213-3437

Mahdi, Amir Yasseen and Siti Sophiayati Yuhaniz, Siti Sophiayati Yuhaniz (2021) Automatic extraction of knowledge for diagnosing COVID-19 disease based on text mining techniques: A systematic review. Periodicals of Engineering and Natural Sciences, 9 (2). pp. 918-929. ISSN 2303-4521

Mahdi, Taha H. and Ahmad, Arshad and Nasef, Mohamed Mahmoud and Ripin, Adnan (2015) State-of-the-art technologies for separation of azeotropic mixtures. Separation and Purification Reviews, 44 (4). pp. 308-330. ISSN 1542-2119

Mahdiyar, Amir and Armaghani, Danial Jahed and Marto, Aminaton and Nilashi, Mehrbakhsh and Ismail, Syuhaida (2019) Rock tensile strength prediction using empirical and soft computing approaches. Bulletin of Engineering Geology and the Environment, 78 (6). pp. 4519-4531. ISSN 1435-9529

Mahdiyar, Amir and Marto, Aminaton and Mirhosseinei, Seyed Abolghasem (2018) Probabilistic air-overpressure simulation resulting from blasting operations. Environmental Earth Sciences, 77 (4). p. 123. ISSN 1866-6280

Mahdiyar, Amir and Tabatabaee, Sanaz and Abdullah, Arham and Marto, Aminaton (2018) Identifying and assessing the critical criteria affecting decision-making for green roof type selection. Sustainable Cities and Society, 39 . pp. 772-783. ISSN 2210-6707

Mahmod, S. M. and Daud, S. M. and Yuhaniz, S. S. and Azizan, A. and Sjarif, N. N. A. (2017) Improving accuracy of decoding process with pore-based fingerprint fuzzy vault in biometric cryptosystem. Advanced Science Letters, 23 (5). pp. 4068-4073. ISSN 1936-6612

Mahmood, Noor Shakir and Ajmi, Ahmed Ali and Sarip, Shamsul and Jamaludin, Khairur Rijal and Mad Kaidi, Hazilah and Abdul Talib, Hayati (2021) Implications COVID-19 on performance and energy management in the production electricity. Computers, Materials and Continua, 69 (1). pp. 895-911. ISSN 1546-2218

Mahmood, Noor Shakir and Ajmi, Ahmed Ali and Sarip, Shamsul and Mad Kaidi, Hazilah and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah (2020) Energy management cultures assessment and its impact on the quality of service in power plants a research gap for future studies. Palarchs Journal of Archaeology of Egypt/Egyptolog, 17 (7). pp. 11398-11412. ISSN 1567-214X

Mahmood, Noor Shakir and Ajmi, Ahmed Ali and Sarip, Shamsul and Mad Kaidi, Hazilah and Suhot, Mohamed Azlan and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah (2022) Modeling energy management sustainability: Smart integrated framework for future trends. Energy Reports, 8 (NA). pp. 8027-8045. ISSN 2352-4847

Mahmood, Y. and Kama, N. and Azmi, A. (2020) A systematic review of studies on use case points and expert-based estimation of software development effort. Journal of Software: Evolution and Process, 32 (7). ISSN 2047-7481

Mahmood, Y. and Kama, N. and Azmi, A. and Ya'acob, S. (2020) An IoT based home automation integrated approach: impact on society in sustainable development perspective. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 240-250. ISSN 2158-107X

Mahmood, Yasir and Kama, Nazri and Azmi, Azri and Khan, Ahmad Salman and Ali, Mazlan (2021) Software effort estimation accuracy prediction of machine learning techniques: A systematic performance evaluation. Software - Practice and Experience, 52 (1). pp. 39-65. ISSN 0038-0644

Mahmoud, Abdelgadir M. and Osman, Omer M. (2020) Integrated framework to mitigate risks during strategy implementation. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences . pp. 36-42. ISSN 2349-7300

Mahmoud Nasef, Eithar Mohamed and Abu Bakar, Nur Azaliah (2020) Enterprise architecture “As-Is” analysis for competitive advantage. International Journal of Advanced Computer Science and Applications, 11 (7). pp. 102-107. ISSN 2158-107X

Mahmoudian, S. and Reza Sazegar, M. and Afshari, N. and Uzir Wahit, M. (2017) Graphene reinforced regenerated cellulose nanocomposite fibers prepared by lyocell process. Polymer Composites, 38 . E81-E88. ISSN 0272-8397

Mahmud, M. and Yusof, S. M. (2018) The influence of religiosity on safety behavior of workers: A Proposed Framework. Pertanika Journal of Social Sciences and Humanities, 26 (1). pp. 1-20. ISSN 0128-7702

Mahmud, Mohd. Razali (2010) Competency of hydrographic services. Hydro International, 14 (5). ISSN 1385-4569

Mahmud, Shahril Anwar and Ahmad, Abdullah Sani and Megat Abdullah, Aminatuzuhariah (2012) Domestic possessions and space adequacy in urban homes. International Transaction Journal of Engineering, Management and Applied Sciences and Technologies, 3 (4). pp. 439-454. ISSN 1906-9642 (Electronic) ; 2228-9860 (Online)

Mahmud, Saimi @ Saini and Idris, Abdul Wahid (1994) Perkembangan Pengukuran Kadester di Sarawak. Buletin Ukur, 5 (1). pp. 15-35. ISSN 0128-4274

Mahmuddin, Yasmin and Abdullah, Mazilah and Mohd. Anim, Nur Aqilah Hazirah and Abd. Aziz, Nurul Ashykin and Abd. Aziz, Nurul Aien and Yahaya, Rusliza and Abd. Aziz, Noreen Noor (2022) The stimulus factors influencing intention to participate in shopping during the distribution of the 12.12 online shopping festivals in Malaysia. Journal of Distribution Science, 20 (8). pp. 93-103. ISSN 1738-3110

Mahrin, Mohd. Naz’Ri and Chuprat, Suriayati and Subbarao, Anusuyah and Mohd. Ariffin, Aswami Fadillah and Talib, Mohd. Zabri Adil and Ahmad Darus, Mohammad Zaharudin and Abd. Aziz, Fakhrul Afiq (2018) Malware prediction algorithm: Systematic review. Journal of Theoretical and Applied Information Technology, 96 (16). pp. 5438-5457. ISSN 1992-8645

Mahrous, Samar A. and Che Sidik, Nor Azwadi and Saqr, Khalid M. (2020) Newtonian and non-newtonian CFD models of intracranial aneurysm: A review. CFD Letters, 12 (1). pp. 62-86. ISSN 2180-1363

Mahrous, Samar A. and Che Sidik, Nor Azwadi and Saqr, Khalid M. (2021) Numerical study on the energy cascade of pulsatile Newtonian and power-law flow models in an ICA bifurcation. PLoS ONE, 16 (1). pp. 1-19. ISSN 1932-6203

Maidin, Siti Nurhafizza and Azizan, Azizul and Abas, Hafiza and Mohd. Sam, Suriani and Abd. Ghani, Hadhrami and Abdul Hamid, Mohd. Johaary (2018) Review on implementation of IoT for environmental condition monitoring of crop or farm in agriculture sector. Open International Journal Of Informatics (OIJI), 6 (3). ISSN 2289-2370

Majid, M. L. A. and Chuprat, S. (2020) Adapting market-oriented policies for scheduling divisible loads on clouds. International Journal of Distributed Systems and Technologies, 11 (2). pp. 45-55.

Mak, Weng Yee and Asri Ibrahim, Kamarul (2009) Fault detection and diagnosis using correlation coefficients between variables. Jurnal Teknologi Siri, 50 (F). pp. 1-13. ISSN 2180-3722

Malakouti, M. and Rezaei, S. and Shahijan, M. K. (2017) Agile supply chain management (ASCM): a management decision-making approach. Asia Pacific Journal of Marketing and Logistics, 29 (1). pp. 171-182. ISSN 1355-5855

Maliha, Ayman and Yusof, Rubiyah and Shapiai, Mohd. Ibrahim (2016) Extreme learning machine for structured output spaces. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press)

Mamat, Normaisharah and Othman, Mohd. Fauzi and Abdoulghafor, Rawad and Belhaouari, Samir Brahim and Mamat, Normahira and Mohd. Hussein, Shamsul Faisal (2022) Advanced technology in agriculture industry by implementing image annotation technique and deep learning approach: A review. Agriculture (Switzerland), 12 (7). pp. 1-35. ISSN 2077-0472

Mamat, Normaisharah and Yakub, Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri (2018) Performance comparison of controllers for suppressing the structural building vibration. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 537-544. ISSN 2502-4752

Mambou, Sebastien and Krejcar, Ondrej and Kuca, Kamil and Selamat, Ali (2018) Novel cross-view human action model recognition based on the powerful view-invariant features technique. Future Internet, 10 (89). pp. 1-17. ISSN 1999-5903

Mani, Mohan Prasath and Mohd. Faudzi, Ahmad Athif and Mohamaddan, Shahrol and Ismail, Ahmad Fauzi and Rathanasamy, Rajasekar and Ayyar, Manikandan and Jaganathan, Saravana Kumar (2022) Engineered polymer matrix novel biocompatible materials decorated with eucalyptus oil and zinc nitrate with superior mechanical and bone forming abilities. Arabian Journal of Chemistry, 15 (9). pp. 1-10. ISSN 1878-5352

Manickam, Yamuna and Mad Nordin, Mariam Firdhaus and Shameli, Kamyar and Wannahari, Rizki and Iqbal, Nida and Mohd. Shariff, Amir Husni (2015) Comparative studies on different kind of durian husks as microstructure activated carbon. Journal of Optoelectronics and Biomedical Materials, 7 (3). pp. 53-58. ISSN 2066-0049

Manikandan, Ayyar and Mani, Mohan P. and Jaganathan, Saravana Kumar and Rajasekar, Rathanasamy (2018) Morphological, thermal, and blood-compatible properties of electrospun nanocomposites for tissue engineering application. Polymer Composites, 39 . E132-E139. ISSN 0272-8397

Manoharan, E. and Othman, N. and Mohammad, R. and Chelliapan, S. and Tobi, S. U. M. (2020) Integrated approach as sustainable environment technique for managing construction waste : a review. Journal of Environmental Treatment Techniques, 8 (2). pp. 560-566. ISSN 2309-1185

Manshor, H. and Abdullah, E. C. and Azhar, A. Z. A. and Sing, Y. W. and Ahmad, Z. A. (2017) Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: the effects on microstructure and properties. Journal of Alloys and Compounds, 722 . pp. 458-466. ISSN 0925-8388

Manshor, Hanisah and Md. Aris, Suriyana and Ahmad Azhar, Ahmad Zahirani and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2015) Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite. Ceramics Intertiol, 41 (3). pp. 3961-3967. ISSN 2728-842

Mansoor, Nafees and Islam, A. K. M. Muzahidul and Zareei, Mahdi and Baharun, Sabariah and Wakabayashi, Toshio and Komaki, Shozo (2015) Cognitive Radio Ad-Hoc Network Architectures: a Survey. Wireless Personal Communications, 81 (3). pp. 1117-1142. ISSN 9284-9311

Mansor, M. S. F. and Zamzuri, H. and Jahari, A. N. M. and Puad, A. A. and Ahmad, F. and Mazlan, S. A. (2018) Modelling and force tracking control for newly type configuration of magneto-rheological damper. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-5). pp. 135-140. ISSN 2180-1843

Mansor, Muhammad Saiful Badri and Zakaria, Zulkarnay and Balkhis, Ibrahim and Abdul Rahim, Ruzairi and Abdul Sahib, Mohd. Fadzli and Md. Yunos, Yusri and Sahlan, Shafishuhaza and Bunyamin, Salinda and Abas, Khairul Hamimah and Ishak, Mohd. Hafis Izran and Danapalasingam, Kumeresan A. (2015) Magnetic induction tomography: a brief review. Jurnal Teknologi, 73 (3). pp. 91-95. ISSN 2180-3722

Mansouri, Hakimeh and Nezhad, Sahar Ebrahim and Kamyab, Hesam and Chelliapan, Shreeshivadasan and Kirpichnikova, Irina (2022) The effects of aeration and mixotrophy by acetate and pyruvate on the growth parameters in Scenedesmus obliquus. Biomass Conversion and Biorefinery, 12 (10). pp. 4611-4620. ISSN 2190-6815

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2011) A developed asymmetric PVDF hollow fiber membrane structure for CO2 absorption. International Journal of Greenhouse Gas Control, 5 (2). pp. 374-380. ISSN 1750-5836

Mansur, Shaiful Amri and Mohamed, Miswan @ Abd. Hakim (2006) An assessment tool for monitoring project performance. Malaysian Journal of Civil Engineering, 18 (1). pp. 14-28. ISSN 1823-7843

Manteghi, Golnoosh and Limit, Hasanuddin and Remaz, Dilshan (2015) Water bodies an urban microclimate: a review. Modern Applied Science, 9 (6). pp. 1-12. ISSN 1913-1844

Mardhiah, T. A. and Akmal, T. Z. and Talib, A. H. Q. A. and Jalil, S. Z. A. and Aris, S. A. M. (2021) Stress classification based on human electromagnetic radiation analysis. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 218-226. ISSN 2502-4752

Maresova, Petra and Soukal, Ivan and Svobodova, Libuse and Hedvicakova, Martina and Javanmardi, Ehsan and Selamat, Ali and Krejcar, Ondrej (2018) Consequences of industry 4.0 in business and economics. Economies, 6 (3). 46-1-46-14. ISSN 2227-7099

Marghany, Maged and Hashim, Mazlan (2009) Differential synthetic aperture radar interferometry (DINSAR) for 3D coastal geomorphology reconstruction. International Journal of Computer Science and Network Security, 9 (5). pp. 59-63. ISSN 1738-7906

Marghany, Maged and Hashim, Mazlan (2009) Frequency domain analysis of Fuzzy B-Spline for 3D tsunami visualization from remote sensing data. International Journal of Computer Science and Network Security, 9 (5). pp. 149-154. ISSN 1738-7906

Marlan, Z. M. and Jamaludin, K. R. and Harudin, N. and Jaafar, N. N. (2019) Determination of optimal unit space data for taguchi’s t-method based on homogeneity of output. Open International Journal of Informatics, 7 . pp. 167-179. ISSN 2289-2370

Marlan, Zulkifli Marlah and Ramlie, Faizir and Jamaludin, Khairur Rijal and Harudin, Nolia (2022) Enhanced Taguchi’s T-method using angle modulated Bat algorithm for prediction. Bulletin of Electrical Engineering and Informatics, 11 (5). pp. 2828-2835. ISSN 2089-3191

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Ihsan, N. A. M. and Sadzli, F. N. H. and Salim, S. A. Z. S. (2017) Wind energy harvesting from wind-induced vibration. Chemical Engineering Transactions, 56 . pp. 451-456. ISSN 2283-9216

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Comparative study on energy extraction from vibrating square cylinder. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2581-2587. ISSN 1819-6608

Maruai, N. M. and Mat Ali, M. S. and Ismail, M. H. and Shaikh Salim, S. A. Z. (2017) Downstream flat plate as the flow-induced vibration enhancer for energy harvesting. JVC/Journal of Vibration and Control . ISSN 1077-5463 (In Press)

Maseleno, Andino and Sabani, Noraisikin and Huda, Miftachul and Ahmad, Roslee and Jasmi, Kamarul Azmi and Basiron, Bushrah (2018) Demystifying Learning Analytics in Personalised Learning. International Journal of Engineering & Technology, 7 (3). pp. 1124-1129. ISSN 2227-524X

Mashudi, Nurul Amirah and Ahmad, Norulhusna and Mohd. Noor, Norliza (2021) Classification of adult autistic spectrum disorder using machine learning approach. IAES International Journal of Artificial Intelligence, 10 (3). pp. 743-751. ISSN 2089-4872

Mashudi, Nurul Amirah and Ahmad, Norulhusna and Mohd. Noor, Norliza (2022) LiWGAN: A light method to improve the performance of generative adversarial network. IEEE Access, 10 (NA). pp. 93155-93167. ISSN 2169-3536

Mashudi, Nurul Amirah and Mad Kaidi, Hazilah and Sarip, Shamsul and Abdul Latiff, Liza (2021) The modelling and simulation of IoT system in healthcare applications. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 167-177. ISSN 2394-5443

Maskor, N. A. and Muhamad, M. and Krauss, S. E. and Mahmood, N. M. N. (2021) Relationship between personal values, work experience and nursing competencies among cancer care nurses in Malaysia. Asian Pacific Journal of Cancer Prevention, 22 (1). ISSN 1513-7368

Masoomzadeh, A. and Zakaria, W. N. W. and Masrom, M. and Khademi, T (2020) Intellectual capital as key asset in iranian automotive industry. Journal of Environmental Treatment Techniques, 8 (1). pp. 429-439. ISSN 2309-1185

Masoomzadeh, A. and Zakaria, W. N. W. and Masrom, M. and Streimikiene, D. and Tavakoli, R. (2019) Organizational innovation factors, capabilities and organizational performance in automotive industry. Montenegrin Journal of Economics, 15 (3). pp. 83-100. ISSN 1800-5845

Masrom, Maslin and Zainon, Othman and Rahiman, Rosdina (2008) Critical success in e-learning : an examination of technological and institutional support factors. International Journal of Cyber Society and Education, 1 (2). pp. 131-142. ISSN 1995-6649

Masrom, Maslin and Abdulhussean, Sanaa Abdulkarim (2015) A model for e-healthcare adoption and patient safety. Electronic Journal of Computer Science and Information Technology (EJCSIT), 5 (1). pp. 1-6. ISSN 1985-7721

Masrom, Maslin and Busalim, Abdelsalam H. and Abuhassna, Hassan and Nik Mahmood, Nik Hasnaa (2021) Understanding students’ behavior in online social networks: a systematic literature review. International Journal of Educational Technology in Higher Education, 18 (1). p. 6. ISSN 2365-9440

Masrom, Maslin and Hakemi, Aida (2019) Technical and infrastructural aspects of mobile learning adoption in Iran higher education. International Journal of Internet, Broadcasting and Communication, 11 (1). pp. 1-7. ISSN 2288-4920

Masrom, Maslin and Inge Handriani, Inge Handriani and Maarop, Nurazean (2022) Evaluating information technology implementation success factors using a balanced scorecard. Journal Of Information System And Technology Management (JISTM), 7 (27). pp. 201-210. ISSN 0128-1666

Masrom, Maslin and Moomal, Asma (2015) Ict development and its impact on e-business and hrm strategies in the organizations of Pakistan. Journal Of Advanced Management Science, 3 (4). pp. 344-349. ISSN 2168-0787

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Hooi, Lai Wan and Jamal, Nadia (2012) Information and communication technology issues: a case of Malaysian primary school. ARPN Journal of Science and Technology, 2 (5). pp. 504-511. ISSN 2225-7217

Masrom, Maslin and Saiful Bahry, Farrah Diana and Mohd. Tobi, Siti Noraini and Hamsi, Ahmad Safwan (2015) Cybercrime over internet love scams in Malaysia: a discussion on the theoretical perspectives, connecting factors and keys to the problem. Journal Of Management Research, 7 (2). pp. 169-181. ISSN 1941-899X

Masudi, A. and Harimisa, G. E. and Ghafar, N. A. and Jusoh, N. W. C. (2020) Magnetite-based catalysts for wastewater treatment. Environmental Science and Pollution Research, 27 (5). pp. 4664-4682. ISSN 0944-1344

Masudi, A. and Jusoh, N. W. C. and Jusoh, R. and Jaafar, N. F. and Jalil, A. A. and Firdausi, A. and Hartanto, D. (2020) Equidistant crystal distortion arrangement of copper doped magnetite for paracetamol degradation and optimization with response surface methodology (RSM). Materials Chemistry and Physics, 250 .

Masudi, A. and Jusoh, N. W. C. and Muraza, O. (2020) Opportunities for less-explored zeolitic materials in the syngas-to-olefins pathway over nanoarchitectured catalysts: a mini review. Catalysis Science and Technology, 10 (6). pp. 1582-1596. ISSN 2044-4753

Mat, Ramli (1993) Comparative study of zeolite A synthesis in batch and semibatch reactors. Buletin FKKKSA, 7 (2). pp. 27-33. ISSN 0128-0740

Mat, Ramli (1993) Synthesis and crystallization of zeolite A. Buletin FKKKSA, 7 (1). pp. 50-54. ISSN 0128-0740

Mat Ali, Mohamed Sukri and Jalasabri, Jafirdaus and Mohd. Sood, Anwar and Mansor, Shuhaimi and Shaharuddin, Haziqah and Muhamad, Sallehuddin (2018) Wind noise from A-pillar and side view mirror of a realistic generic car model, DriAver. International Journal of Vehicle Noise and Vibration, 14 (1). pp. 38-61. ISSN 1479-1471

Mat Dzahir, Mohd. Azuwan and Yamamoto, Shin-ichiroh (2020) Inverse modeling of nonlinear artificial muscle using polynomial parameterization and particle swarm optimization. Advances in Materials Science and Engineering, 2020 . pp. 1-15. ISSN 1687-8442

Mat Rejab, Mazidah and Md. Sarkan, Haslina and Firdaus Azmi, Nurulhuda and Chuprat, Suriayati and Yahya, Yazriwati and Yusop, Othman and Azmi, Azri (2015) Application of product data management at Mimos Bhd. Open International Journal of Informatics (OIJI), 3 (1). pp. 28-40. ISSN 2289-2370

Mat Saman, Muhamad Zameri and Cheong, Wee Tat (1999) Development and implementation of computer integrated production planning system for job shop company. Jurnal Mekanikal, 1 (7). pp. 1-16. ISSN 0127-3396

Mat Sidek, Abd. Rahim and Sha'ameri, Ahmad Zuri (2007) Comparison analysis of stream cipher algorithms for digital communication. Jurnal Teknologi, 46 (D). pp. 1-16. ISSN 2180-3722

Mat Song, Rusdi and Mazlan, Saiful Amri and Johari, Norhasnidawani and Imaduddin, Fitrian and Abdul Aziz, Siti Aishah and Abd. Fatah, Abdul Yasser and Ubaidillah, U. (2022) Semi-active controllable stiffness engine mount utilizing natural rubber-based magnetorheological elastomers. Frontiers in Materials, 9 (NA). pp. 1-12. ISSN 2296-8016

Mat Tahir, Noor Ayuma and Shahira Liza, Shahira Liza and Kanao, Fukuda and Mohamad, Syazwani and Hashimi, Mohd. Zakir Fathi and Mohd. Yunus, Mohd. Saifulnizam and Yaakob, Yazid and Othman, Intan Sharhida (2022) Surface and tribological properties of oxide films on aluminium alloy through fly-ash reinforcement. Coatings, 12 (2). pp. 1-19. ISSN 2079-6412

Mat, Hanapi and Stitt, E.H. and Abdul Mutalib, Mohamed Ibrahim (1989) Large scale preparative electrophoresis equipment: the current state-of-the-art. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 443-458.

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, Takeshi and Rizal, Setria and Zamheri, A. (2016) Stand-alone water treatment : performance of electrospun nanofibers. Jurnal Teknologi, 78 (12). pp. 103-107. ISSN 0127-9696

Mathew, Sindhu and Zakaria, Zainul Akmar (2015) Pyroligneous acid-the smoky acidic liquid from plant biomass. Applied Microbiology and Biotechnology, 99 (2). pp. 611-622. ISSN 0175-7598

Matsukawa, H. and Kuwabara, K. and Shimada, Y. and Tsuji, T. and Otake, K. (2020) Densities for carbon dioxide/cyclohexane, methylcyclohexane, and ethylbenzene systems. Journal of Chemical Thermodynamics, 142 . ISSN 0021-9614

Matsuura, Shohei and Razak, Khamarrul Azahari (2019) Exploring transdisciplinary approaches to facilitate disaster risk reduction. Disaster Prevention and Management: An International Journal, 28 (6). pp. 809-822. ISSN 0965-3562

Matsuzaki, T. and Elfadil, O. and Horiuchi, K. and Shiratsuchi, H. and Mashiko, K. (2019) Embedded controller based learning system for dc motor control. International Journal of Innovative Computing, Information and Control, 15 (3). pp. 997-1007. ISSN 1349-4198

Matsuzaki, Takanori and Taguchi, Emiko and Horiuchi, Kozo and Shiratsuchi, Hiroshi and Mashiko, Koichiro (2022) Implementation of a user interface for an educational material system to easily experience the differences in motor control theory. ICIC Express Letters, Part B: Applications, 13 (6). pp. 589-595. ISSN 2185-2766

Maxwell, O. and Sunday, J. E. and Oladotun, A. O. and Akinloye, A. S. and Emenike, P. C. and Tenebei, I. T. and Ofuyatan, O. and Sociis, O. T. and Wagira, H. and Mouri, H. (2017) Assessment of dose intake of toxic elements in groundwater samples from Abuja, North Central Nigeria. WIT Transactions on Ecology and the Environment, 216 . pp. 267-275. ISSN 1746-448X

Mazlan, A. A. and Daud, S. M. and Sam, S. M. and Abas, H. and Rasid, S. Z. A. and Yusof, M. F. (2020) Scalability challenges in healthcare blockchain system - a systematic review. IEEE Access, 8 . pp. 23663-23673. ISSN 2169-3536

Mazlan, N. S. F. and Ahmad Khairudin, N. B. (2016) A molecular dynamics study of Beta-Glucosidase B upon small substrate binding. Journal of Biomolecular Structure and Dynamics, 34 (7). pp. 1486-1494. ISSN 0739-1102

Mazlan, Nurul Aiyshah and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Hasannuddin, A. K. and Ramlan, Nur Atiqah and Sugeng, Dhani Avianto and Muhammad Adib, A. R. and Koga, Tsuyoshi and Mamat, Rizalman and Che Sidik, Nor Azwadi (2018) Effects of different water percentages in non-surfactant emulsion fuel on performance and exhaust emissions of a light-duty truck. Journal of Cleaner Production, 179 . pp. 559-566. ISSN 0959-6526

Mazlan, Sulaiman and Abdul Rahman, Hisyam and KaderIbrahim, Babul Salam Ksm and Huq, Muhamad Saiful and Yeong, Che Fai (2022) Non-motorised rehabilitation device for performance assessment in upper limb stroke rehabilitation: A pilot study. International Journal of Integrated Engineering, 14 (4). pp. 323-331. ISSN 2229-838X

Mazlan, Sulaiman and Abdul Rahman, Hisyam and Yeong, Che Fai and Kader Ibrahim, Babul Salam Ksm and Huq, Muhamad Saif (2020) Kinematic variables for upper limb rehabilitation robot and correlations with clinical scales: A review. Bulletin of Electrical Engineering and Informatics, 9 (1). pp. 75-82. ISSN 2302-9285

Md Piah, Md Afendi and Darus, Ahmad and Hassan, Azman (2004) Effect of ATH filler on the electrical tracking and erosion properties of natural rubber-LLDPE blends under wet contaminated conditions. Journal of Industrial Technology, 13 (1). pp. 27-40. ISSN 0882-6404

Md. Sarip, M. S. and Yamashita, Y. and Morad, N. A. and Che Yunus, M. A. and Abdul Aziz, M. K. (2016) Modeling and optimization of the hot compressed water extraction of palm oil using artificial neural network. Journal of Chemical Engineering of Japan, 49 (7). pp. 614-621. ISSN 0021-9592

Md Yassin, Abu Azam and Ismail, Abdul Razak and Mohammad, Abd. Halim (1993) Evaluation of formation damage caused by drilling fluid in deviated wellbore. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-2.

Md Zaki, Nurul Asyikin and Muhammad, Ida Idayu and Md. Salleh, Liza and Khairuddin, Noziena (2007) Drying characteristics of papaya (carica papaya L.) during microwave vacuum treatment. International Journal of Engineering and Technology, 4 (1). pp. 15-21. ISSN 1823-1039

Md. Akhir, Fazrena Nadia and Mohd. Noor, Mohd. Hezmee and Leong, Keith Weng Kit and Nabizadeh, Jamileh A. and Manthey, Helga D. and Sonderegger, Stefan E. and Fung, Jenny Nga Ting and McGirr, Crystal E. and Shiels, Ian A. and Mills, Paul C. and Woodruff, Trent M. and Rolfe, Barbara E. (2021) An immunoregulatory role for complement receptors in Murine Models of breast cancer. Antibodies, 10 (1). pp. 1-12. ISSN 2073-4468

Md. Din, Ami Hassan and Azmi, Shahrul Mardhiah (2022) Processing sentinel-1a images using sentinel application platform software to generate interferogram for measure ground deformation in Kelantan. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 177-185. ISSN 0128-1666

Md. Ibrahim, N. N. N. and Hashim, A. M. (2021) High sensitivity of deoxyribonucleic acid detection via graphene nanohole/si micro-nanopore structure fabricated by focused ion beam. Materials Letters, 305 . ISSN 0167-577X

Md. Ibrahim, Nik Noor Nabilah and Hashim, Abdul Manaf (2020) Fabrication of si micropore and graphene nanohole structures by focused ion beam. Sensors, 20 (6). p. 1572. ISSN 1424-8220

Md. Noor, Norhazilan and Yahaya, Nordin and Mat Din, Mazura and Nor Ozman, Nor Apaziah (2009) Prediction of corroding pipeline remaining life-time using semi-probabilistic approach. Malaysian Journal of Civil Engineering, 21 (2). pp. 204-218. ISSN 1823-7843

Md. Sarkan, Haslina and Kama, Nazri and Mohd. Yusop, Othman and Azmi, Azri (2018) A methodology for improving the accuracy of ongoing software development effort prediction. Open International Journal Of Informatics (OIJI), 6 (3). pp. 32-42. ISSN 2289-2370

Md. Yassin, Abu Azam (1987) Drilling cutting removal in inclined anuli - A review. Buletin FKKKSA . pp. 22-30. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Legislation on oil pollution prevention and control during petroleum production. Buletin FKKKSA, 2 (1). pp. 29-35. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Formation damage during drilling and completion practices - a review. Buletin FKKKSA, 1 (2). pp. 41-50. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Skop penyelidikan di Jabatan Kejuruteraan Petroleum. Buletin FKKKSA, 1 (2). pp. 9-17. ISSN 0128-0740

Md. Yusoff, Nelidya and Yao, Lau Kuen and Sulaiman, Abdul Hadi and Mohd. Yusoff, Norita and Mahdi, Mohd. Adzir (2021) Stable dual-wavelength laser incorporating polarization-maintaining erbium-doped fiber. Optics and Laser Technology, 135 . p. 106707. ISSN 0030-3992

Md. Zain, M. Z. and Tokhi, M. O. and Mohamed, Z. (2006) Performance of hybrid learning control with input shaping for input tracking and vibration suppression of a flexible manipulator. Jurnal Teknologi A (44A). pp. 41-64. ISSN 0127-9696

Md. Zainudin, Noorfaizah and Tasnim, Rahayu (2020) Business practices to minimize safety risks: A case study of two adventure tourism businesses in Malaysia. Business Management And Strategy, 11 (1). pp. 40-54. ISSN 2157-6068

Mehmood, Ahsan and Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Karri, Rama Rao and Mohammad Khalid, Mohammad Khalid and Walvekar, Rashmi and Abdullah, Ezzat Chan and Nizamuddin, Sabzoi and Mazari, Shaukat Ali (2021) Magnetic nanocomposites for sustainable water purification—a comprehensive review. Environmental Science and Pollution Research, 28 (16). pp. 19563-19588. ISSN 0944-1344

Mehmood, Gulzar and Khan, Muhammad Sohail and Abdul Waheed, Abdul Waheed and Zareei, Mahdi and Muhammad Fayaz, Muhammad Fayaz and Sadad, Tariq and Kama, Nazri and Azmi, Azri (2021) An efficient and secure session key management scheme in wireless sensor network. Complexity, 2021 . p. 6577492. ISSN 1076-2787

Memari, A. and Ahmad, R. and Rahim, A. R. A. and Hassan, A. (2018) Optimizing a Just-In-Time logistics network problem under fuzzy supply and demand: two parameter-tuned metaheuristics algorithms. Neural Computing and Applications, 30 (10). pp. 3221-3233. ISSN 0941-0643

Memari, Ashkan and Ahmad, Robiah and Abdul Rahim, Abd. Rahman and Jokar, Mohammad Reza Akbari (2018) An optimization study of a palm oil-based regional bio-energy supply chain under carbon pricing and trading policies. Clean Technologies And Environmental Policy, 20 (1). pp. 113-125. ISSN 1618-954X

Memon, M. and Rahim, A. and Eteng, A. (2016) Wireless power transfer in near-field communication using a current-controlled multi loops with a loaded capacitance. Microwave and Optical Technology Letters, 58 (10). pp. 2472-2476. ISSN 0895-2477

Memon, Ruhal Pervez and Achekzai, Lemar and Mohd. Sam, Abdul Rahman and Abdul Awal, A. S. M. and Memon, Uroosa (2018) Performance of sawdust concrete at elevated temperature. Jurnal Teknologi, 80 (1). pp. 165-171. ISSN 0127-9696

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2008) Low-sulfate seawater injection into oil reservoir to avoid scaling problem. Journal of Applied Sciences, 8 (7). pp. 1169-1178. ISSN 1812-5654

Merdhah, Amer Badr and Mohd. Yassin, Abu Azam and Ahmed Muherei, Mazen (2010) Laboratory and prediction of barium sulfate scaling at high-barium formation water. Journal of Petroleum Science and Engineering, 70 (1-2). 79 - 88. ISSN 0920-4105

Meshginqalam, B. and Toloue, H. and Ahmadi, M. T. and Sabatyan, A. and Centeno, A. and Ismail, R. (2016) Graphene embedded surface plasmon resonance based sensor prediction model. Optical and Quantum Electronics, 48 (6). ISSN 0306-8919

Mhd. Yusoff, Mohd. Akmal and Mohd. Faudzi, Ahmad Athif and Basri, Mohd. Shukry Hassan and Rahmat, Mohd. Fuaad and Shapiai, Mohd. Ibrahim and Mohamaddan, Shahrol (2022) Switching model predictive control for thin McKibben muscle servo actuator. Actuators, 11 (8). pp. 1-16. ISSN 2076-0825

Michael, Maria and Meyyazhagan, Arun and Velayudhannair, Krishnakumar and Pappuswamy, Manikantan and Anu Maria, Anu Maria and Xavier, Vincent and Balasubramanian, Balamuralikrishnan and Baskaran, Rathinasamy and Kamyab, Hesam and Vasseghia, Yasser and Chelliapan, Shreeshivadasan and Safa, Maryam and Moradi, Zohre and Khadimallah, Mohamed Amine (2022) The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem. Sustainability, 14 (8). pp. 1-13. ISSN 2071-1050

Mikami, Osamu and Ambran, Sumiaty and Fujikawa, Chiemi and Ahmad, Fauzan and Ibrahim, Amalina Athira (2018) Uv-curable resin microlens on patterned substrate for optical interconnect. Plasma Application and Hybrid Functionally Materials, 27 . pp. 41-42. ISSN 1340-9557

Minghat, Asnul Dahar and Abdullah, Noor Azihah and Suparman, S. (2022) The challenges of remote e-assessments during COVID-19 outbreaks among undergraduate engineering programs. ASEAN Journal of Science and Engineering Education, 2 (3). pp. 229-232. ISSN 2775-6793

Minghat, Asnul Dahar and Kok, Wee Yunn and Mustakim, Siti Salina and Subari, Kamalularifin (2019) The infusion of creativity among science students’ learner at Lestari Kemajuan Education. Journal Online Jaringan Pengajian Seni Bina (JOJAPS), 14 . pp. 103-108. ISSN 2504-8457

Minghat, Asnul Dahar and Mustakim, Siti Salina and Ana A., Ana A. and Kassymova, G. K. and Suparman, S. (2020) Measuring technical and vocational education and training (TVET) teacher’s technical competency and the development of programme-specific-directory. International Journal of Psychosocial Rehabilitation, 24 (8). pp. 3730-3735. ISSN 1475-7192

Misni, F. and Nik Mahmood, N. H. and Jamil, R. (2019) The effect of curriculum design on the employability competency of Malaysian graduates. Management Science Letters, 10 (4). pp. 909-914. ISSN 1923-9335

Miyabayashi, K. and Miyake, M. (2017) Metal-Support Interactions of Platinum Nanoparticles Modified with Pyrene-functionalized Alkylamine and Improved Electrocatalytic Activity of Oxygen Reduction Reaction. CHEMISTRY LETTERS, 46 (5). pp. 707-710. ISSN 0366-7022

Miyabayashi, Keiko and Ishihara, Kenta and Joshi, Prerna and Shen, Zhongrong and Miyake, Mikio (2018) Aromatic Ring Size Effect of a Surface Modification Agent on Platinum Nanoparticle Electrocatalysts for Oxygen Reduction Reaction. Electrocatalysis, 9 (4). pp. 486-494. ISSN 1868-2529

Mizutani, A. and Hamano, F. and Nakamura, D. and Goto, T. and Aid, S. R. and Ikenoue, H. (2021) Size effects of poly-si formed by laser annealing with periodic intensity distribution on the tft characteristics. IEEE Journal of the Electron Devices Society, 9 . ISSN 2168-6734

Mobark, M. and Chuprat, S. and Mantoro, T. and Azizan, A. (2017) Utilization of mobile phone sensors for complex human activity recognition. Advanced Science Letters, 23 (6). pp. 5466-5471. ISSN 1936-6612

Moghbel, Mehrdad and Ooi, Chia Yee and Ismail, Nordinah and Hau, Yuan Wen and Memari, Nogol (2020) A review of breast boundary and pectoral muscle segmentation methods in computer-aided detection/diagnosis of breast mammography. Artificial Intelligence Review, 53 (3). pp. 1873-1918. ISSN 0269-2821

Mohamad, Noor Azmi and Wan Ismail, Wan Faridah Akmal and Omain, Siti Zaleha (2001) Ciri Kerja Dan Prestasi Profesional Teknologi Maklumat Sektor Awam Malaysia. Jurnal Teknologi E (35E). pp. 11-20. ISSN 0127-9696

Mohamad, Radziah and Abang Jawawi, Dayang Norhayati and Deris, Safaai and Mamat, Rosbi (2001) Formal specification of a wall-climbing robot using Z-A case study of small-scale embedded hard real-time system. Jurnal Teknologi D (34D). pp. 25-40. ISSN 0127-9696

Mohamad, Ahmad Tajuddin and Jesbains, Kaur and Che Sidik, Nor Azwadi and Rahman, Saidur (2018) Nanoparticles: A review on their synthesis, characterization and physicochemical properties for energy technology industry. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 1-10. ISSN 2289-7879

Mohamad, Khairul Azmi and Othman, Nooraini and Jaapar, Ghazali (2020) Preface to Islamic political psychology: Siyasah syariyyah meets psychology. Journal Of Politics And Law, 13 (3). pp. 38-42. ISSN 1913-9055

Mohamad, Mohamad Ibrahim and Zawawi, Mardhiah and Nekooie, M. A. (2009) Implementing industrialised building system (IBS) in Malaysia: acceptance and awareness level, problems and strategies. Malaysian Journal of Civil Engineering, 21 (2). pp. 219-234. ISSN 1823-7843

Mohamad, Mohd. Riduan and Salleh, Mariam and Abduh, Azeddin Laraki (2022) Low-cost knee brace prototype for rehabilitation after sports injury. Journal of Human Centered Technology, 1 (2). pp. 1-6. ISSN 2821-3467

Mohamad, N. A. and Nasef, M. M. and Nia, P. M. and Zubair, N. A. and Ahmad, A. and Abdullah, T. A. T. and Ali, R. R. (2021) Tetraethylenepentamine-containing adsorbent with optimized amination efficiency based on grafted polyolefin microfibrous substrate for co2 adsorption. Arabian Journal of Chemistry, 14 (4). ISSN 1878-5352

Mohamad, Nurita and Ooi, Chia Yee and Teh, Jwing and Paraman, Norlina and Hassan, Hasliza and Ismail, Nordinah (2020) FPGA-Assisted assertion-based verification platform. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 12 (1). pp. 15-24. ISSN 2180-1843

Mohamad Abdullah, Nazirah and Rambat, Shuib and Mohd. Yatim, Mohammad Hafiz and Omar, Abdullah Hisam and Muhamad Yatim, Muhamad Nur (2020) Systematic literature review of role of applied geomatics in mapping and tracking Corona Virus. International Journal Of Integrated Engineering, 12 (8). pp. 251-256. ISSN 2229-838X

Mohamad Ali, Nor Shamirah and Balasundram, Vekes and Shameli, Kamyar and Ibrahim, Norazana and Isha, Ruzinah and Abdul Manan, Zainuddin (2021) The effect of calcium oxide from waste chicken eggshell on HZSM-5. Chemical Engineering Transactions, 89 . pp. 181-186. ISSN 2283-9216

Mohamad Jamil, Putri Anis Syahira and Karuppiah, Karmegam and Mohammad Yusof, Nur Athirah Diyana and Mohd. Suadi Nata, Dayana Hazwani and Abdul Aziz, Nurhanim and How, Vivien and Mohd. Tamrin, Shamsul Bahri and Naeni, Hassan Sadeghi (2022) Usability testing of a wireless individual indicator system application: Monitoring exposure to outdoor air pollution among Malaysian Traffic Police. Digital Health, 8 (NA). pp. 1-11. ISSN 2055-2076

Mohamad Nor, M. H. and Ismail, Z. H. and Ahmad, M. A. (2016) Broadcast control of multi-agent systems for assembling at unspecified point with collision avoidance. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 75-79. ISSN 2180-1843

Mohamad Shuhaimi, Muhammad Asraf and Brahim, Juliana and Mat Yusoff, Zainidi and Fathi, Mohamad Syazli (2022) The readiness of public universities in adopting industrial revolution 4.0 (IR 4.0) from a construction management perspective. ASEAN Engineering Journal, 12 (2). pp. 111-118. ISSN 2586-9159

Mohamed, A. and Zaki, S. A. and Shirakashi, M. and Ali, M. S. M. and Samsudin, M. Z. and Mohammad, A. F. (2020) Experimental investigation of the effect of a downstream square plate on vortex-induced vibration and galloping of a square cylinder. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (1). pp. 98-113. ISSN 2289-7879

Mohamed, A. M. and Osman, M. H. and Smaoui, H. and Mohd. Ariffin, M. A. (2017) Permeability and tensile strength of concrete with Arabic gum biopolymer. Advances in Civil Engineering, 2017 . ISSN 1687-8086

Mohamed, Azhar and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Shirakashi, Masataka and Mat Ali, Mohamed Sukri and Samsudin, Muhammad Zulfahmi (2021) Experimental investigation on vortex-induced vibration and galloping of rectangular cylinders of varying side ratios with a downstream square plate. Journal of Wind Engineering and Industrial Aerodynamics, 211 . p. 104563. ISSN 0167-6105

Mohamed, H. and Irawati, N. and Ahmad, F. and Ibrahim, M. H. and Ambran, S. and Rahman, M. A. A. and Harun, S. W. (2017) Optical humidity sensor based on tapered fiber with multi-walled carbon nanotubes slurry. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 97-103. ISSN 2502-4752

Mohamed, Maketab (1992) Conflict between industrial growth and water supply preservation: case studies in Malaysia. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 137-166.

Mohamed, Maketab and Jab, Ahmad Tajudin (1993) Penilaian tahap trihalometana dalam air minum: keupayaan menyingkirkannya melalui kaedah rawatan biasa. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-5.

Mohamed, Mohamad Azuwa Zuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Jamil, Siti Munira Unira (2015) Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication. Journal of Applied Polymer Science, 132 (43). ISSN 0021-8995

Mohamed, Zainai and Radin Salim, Kamilah and Haron, Habibah @ Norehan and Ali, Rosmah and Abdullah, Morina (2015) Challenges in implementing engineering technology education in Malaysia. The Asian Journal Of Technology Management, 8 (1). pp. 1-8. ISSN 1978-6956

Mohamed Amin, Amli and Ismail, Syuhaida and Mohd Arof, Khairul Zahreen (2019) Current practice of coal discharging operation in Malaysian port. Journal of Management, Economics, and Industrial Organization, 3 (1). pp. 18-24. ISSN 2521-7054

Mohamed Baqutayan, Shadiya and Ahmad Rafee, Salwa and Aini Ishak, Aspah and Razali, Muhammad Rohaizad and Mohd. Noordin, Nor Baizura (2022) Should we maintain baby hatches in our society? Baby hatch policy in Malaysia. International Journal of Academic Research in Business and Social Sciences, 12 (11). 3073 -3088. ISSN 2222-6990

Mohamed Baqutayan, Shadiya and Mohammed Bagotayan, Sumaya and Hussin, Hafiz and Nyirob, Boniface Basin and Al Balushi, Faisal Ali (2020) Is child labor an issue today? Factors and policy-related. The Journal of Social Sciences Research, 6 (9). pp. 826-837. ISSN 2411-9458

Mohamed Ibrahim, Mahir Hassan and Mahmoud, Abdelgadir and Mat Ali, Roslizar (2020) Factors affecting systems engineering complexity during developmental phase: systems practitioners, developers, and researchers' perspectives. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences, 8 (6). pp. 43-58. ISSN 2349-7300

Mohamed Isa, E. D. and Shameli, K. and Ch'ng, H. J. and Che Jusoh, N. W. and Hazan, R. (2021) Photocatalytic degradation of selected pharmaceuticals using green fabricated zinc oxide nanoparticles. Advanced Powder Technology, 32 (7). pp. 2398-2409. ISSN 0921-8831

Mohamed Khaidir, Rahayu Emilia and Nordin, Nur Azmah and Mazlan, Saiful Amri and Abd. Rahman, Hamimah and Ubaidillah, Ubaidillah and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah (2022) Stiffness enhancement of magnetorheological foam by structural modification using silica nanoparticles additive. Frontiers in Materials, 9 (NA). pp. 1-14. ISSN 2296-8016

Mohamed Kutty, Rasheed and Nik Mahmood, Nik Hasnaa and Masrom, Maslin and Mohdali, Raihana and Wan Zakaria, Wan Normeza and Abdul Razak, Fadhilah and Yahya, Hasniza and Ramli, Rohaini and Aris, Hazleen (2022) The influence of internet addiction and time spent on the internet towards social isolation among university students in Malaysia. Asian Social Science, 18 (10). pp. 32-46. ISSN 1911-2017

Mohamed Mahmoud, Abdelgadir and Ahmed, Omer Mohammed Osman Said (2018) Managing risks during strategy implementation, literature review. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences (IJIRMPS), 6 (6). pp. 1-13. ISSN 2349 - 7300

Mohamed Noor, Norhayati and Umar, Sana and Abdul-Aziz, Azila and Sheikh, Khalid and Somavarapu, Satyanarayana (2022) Engineered dutasteride-lipid based nanoparticle (DST-LNP) system using oleic and stearic acid for topical delivery. Bioengineering, 9 (1). pp. 1-11. ISSN 2306-5354

Mohamed Razali, Muhammad Najib and Mata, Pedro Neves and Zainudin, Ainur Zaireen and Md. Yunus, Norhidayah and Mário, Nuno Mata and José, Moleiro Martins and Abdul Jalil, Rohaya and Rui, Miguel Dantas (2022) Blockchain technology for improving land registration system in an emerging economy. Webology, 19 (2). pp. 4078-4105. ISSN 1735-188X

Mohamed Saaid, Muhammad Faiz and Ibrahim, Ismail and Sudin, Shahdan and Mohamad, Mohd. Saberi and Md. Yusof, Zulkifli and Ahmed Mukred, Jameel Abdulla and Khalil, Kamal and Ibrahim, Zuwairie and Watada, Junzo (2012) Automation of DNA computing readout method based on real-time PCR implemented on DNA engine opticon 2 system. International Journal of Innovative Computing, Information and Control, 8 (3 A). pp. 1907-1916. ISSN 1349-4198

Mohamed Saleh Ba Qutayan, Shadiya and Ariffin, Aini Suzana and Raji, Fauziah (2018) Affordable housing policy: issues and challenges among middle income groups. Journal of Consumer Research and Resource Center (CRRC CONSUMER REVIEW), 6 (6). pp. 21-28. ISSN 2180-2815

Mohamed Saleh Ba Qutayan, Shadiya and Mohd. Mahdzir, Akbariah and Ariffin, Aini Suzana and Ismail A. Mohsin, Magda (2018) The psychology of giving behavior in Islam. Sociology International Journal, 2 (2). pp. 88-92. ISSN 2576-4470

Mohamed Saleh Baqutayan, Shadiya (2019) How can anxiety be better managed? Depression, anxiety, and coping mechanisms among cancer patients. World Cancer Research Journal, 6 (NA). pp. 1-10. ISSN 2372-3416

Mohamed Saleh Baqutayan, Shadiya (2014) The psychological distress and coping mechanisms among intersexed individuals. Annual Research & Review in Biology, 4 (19). pp. 2910-2919. ISSN 2231-4776

Mohamed Yusof, Nor Ashikin (2015) Legal policy implication in industrial application terminology as second patentability requirement on biotechnological inventions. Journal Of Science, Technology And Innovation Policy, 1 (1). pp. 94-121.

Mohamed, Maketab and Jab, Ahmad Tajudin (1992) The assesment of trihalomethane levels in drinking water. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-9.

Mohammad, Ahmad Faiz and Ikegaya, Naoki and Hikizu, Ryo and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki (2021) Turbulence effect of urban-canopy flow on indoor velocity fields under sheltered and cross-ventilation conditions. Sustainability (Switzerland), 13 (2). pp. 1-11. ISSN 2071-1050

Mohammad, Roslina and Amrin, Astuty and Muhamad, Sallehuddin (2015) Theoretical of dynamic loading against water-filled simply supported pipes. Jurnal Teknologi, 75 (11). pp. 143-150. ISSN 0127-9696

Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317.

Mohammad Haniff, Muhammad Aniq Shazni and Zainal Ariffin, Nur Hamizah and Ooi, Poh Choon and Mohd. Razip Wee, Mohd. Farhanulhakim and Mohamed, Mohd. Ambri and Hamzah, Azrul Azlan and Syono, Mohd. Ismahadi and Hashim, Abdul Manaf (2021) Practical route for the low-temperature growth of large-area bilayer graphene on polycrystalline nickel by cold-wall chemical vapor deposition. ACS Omega, 6 (18). pp. 12143-12154. ISSN 2470-1343

Mohammad Yusof, Nur Athirah Diyana and Karuppiah, Karmegam and Mohamad Jamil, Putri Anis Syahira and Khalid, Mohd. Shamsuri and Mohd. Tamrin, Shamsul Bahri and Naeini, Hassan Sadeghi (2022) Development of a high-powered motorcycle seat discomfort survey (MSDS): traffic police motorcycle. International Journal of Industrial Ergonomics, 92 (103374). pp. 1-8. ISSN 0169-8141

Mohammad, A. F. and Zaki, S. A. and Hagishima, A. and Ali, M. S. M. (2015) Determination of aerodynamic parameters of urban surfaces: methods and results revisited. Theoretical And Applied Climatology, 122 (42067). pp. 635-649. ISSN 0177-798X

Mohammadi, Kasra and Shamshirband, Shahaboddin and Por, LipYee and Petkovic, Dalibor and Zamani, Mazdak and Ch., Sudheer (2015) Predicting the wind power density based upon extreme learning machine. Eenergy, 86 . pp. 232-239. ISSN 0360-5442

Mohammed, Badiea Abdulkarem and Mohammed Senan, Ebrahim and Rassem, Taha H. and Makbol, Nasrin M. and Alanazi, Adwan Alownie and Al-Mekhlafi, Zeyad Ghaleb and Almurayziq, Tariq S. and A. Ghaleb, Fuad (2021) Multi-method analysis of medical records and MRI images for early diagnosis of dementia and alzheimer’s disease based on deep learning and hybrid methods. Electronics (Switzerland), 10 (22). pp. 1-20. ISSN 2079-9292

Mohammed, Shahnaz Ali Abdalla and Fathi, Mohamad Syazli (2022) Effective criteria for selecting delay analysis methodologies for construction project in Abu Dhabi. ASEAN Engineering Journal, 12 (2). pp. 101-109. ISSN 2586-9159

Mohammed Al-Bared, Mohammed Ali and Marto, Aminaton and Latifi, Nima (2018) Utilization of recycled tiles and tyres in stabilization of soils and production of construction materials – a state-of-the-art review. KSCE Journal of Civil Engineering, 22 (10). pp. 3860-3874. ISSN 1226-7988

Mohammed Al-Bared, Mohammed Ali and Marto, Aminaton and Latifi, Nima and Horpibulsuk, Suksun (2018) Sustainable improvement of marine clay using recycled blended tiles. Geotechnical and Geological Engineering, 36 (5). pp. 3135-3147. ISSN 0960-3182

Mohammed Al-Bared, Mohammed Ali and Mustaffa, Zahiraniza and Armaghani, Danial Jahed and Marto, Aminaton and Mohd. Yunus, Nor Zurairahetty and Hasanipanah, Mahdi (2021) Application of hybrid intelligent systems in predicting the unconfined compressive strength of clay material mixed with recycled additive. Transportation Geotechnics, 30 (NA). p. 100627. ISSN 2214-3912

Mohammed Shuaib, Mohammed Shuaib and Mohd. Daud, Salwani and Alam, Shadab and Khan, Wazir Zada (2020) Blockchain-based framework for secure and reliable land registry system. Telkomnika (Telecommunication Computing Electronics and Control), 18 (5). pp. 2560-2571. ISSN 1693-6930

Mohammed Yasin, Norazlina and Mohd. Osman, Mohd. Hassan (2015) University spin-off for economic development in Malaysian universities. International Journal of Economics and Financial Issues, 5 . pp. 135-138. ISSN 2164-4138

Mohd Azoddein, Abd Aziz and Saidi, Hamdani (1994) Penentuan parameter teori erapan mod duaan (dual sorption theory) untuk gas N2. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Mohd Hasbullah, Mohd Hasbullah and Hassan, Azman (2005) Enhancing the toughness of talc filled polypropylene - the application of ethylene propylene rubber as impact modifier. Buletin Kimia, 21 (1&2). pp. 11-17. ISSN 0127-8711

Mohd Izhar, M. A. and Babar, Z. and Nguyen, H. V. and Botsinis, P. and Alanis, D. and Chandra, D. and Ng, S. X. and Hanzo, L. (2018) Quantum turbo decoding for quantum channels exhibiting memory. IEEE Access, 6 . pp. 12369-12381. ISSN 2169-3536

Mohd Nawawi, Mohd Ghazali and Hassan, Hashim and Jalil , Abdul Rahim (2003) Modification of chitosan-based membranes using zeolite for pervaporation separation of isopropanol-water mixtures. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 87-91.

Mohd Nawawi, Mohd Ghazali and Hassan, Hashim and Tan, Soon Huat (2001) Azeotropic separation of isopropanol-water mixtures by pervaporation using a locally-produced chitosan-based membrane. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 553-560.

Mohd Nawawi, Mohd Ghazali and Tan, Soon Huat and Hassan, Hashim (2001) Pervaporation separation of isopropanol-water mixtures using chitosan based membranes. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 115-120.

Mohd Yunus, Mohd Yusri and Ali, Mohamad Wijayanuddin (2001) Hazard identification on fractionation column using rule based expert system. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 504-509.

Mohd Yunus, Rosli and Junin, Radzuan and Sulaiman, Ahmad Ziad and Abdul Aziz, Ramlan and Ngah, Mokhtar and Nasir, Abu Samah and Sethpa, Mohd Sabri (2001) Intensified Niagara leaf filtration via in-situ ultrasonic wave fields. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 531-535.

Mohd Yusof, Zainal Abidin and Hashim, Shahrir and Rahmat, Abdul Razak (1994) The mechanical properties of toughened poly(methyl methacrylate) sheet materials (part 1). Buletin FKKKSA, 8 (1). pp. 7-12. ISSN 0128-0740

Mohd Yusof, Khairiyah and Kamsah, Mohd Zaki and Abdul Aziz, Badhrulhisham (1994) Computer-aided process engineering (CAPE): education and practice. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Mohd Yusof, Khairiyah and Yunus, Robiah and Yong, Fo Sin and Tan, Boon Seong and Ripin, Adnan and Abdul Aziz, Badhrulhisham (1995) Multimedia in chemical engineering education: Universiti Teknologi Malaysia Experience. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B1-1.

Mohd Yusof, Mohd Rashid and I., Salmah and R.S., Ahmad (1991) Kesan suhu terhadap kandungan lembapan dan asid lemak bebas isirong kelapa sawit. Buletin FKKKSA, 5 (1). pp. 14-20. ISSN 0128-0740

Mohd., Suzila and Fathi, Mohamad Syazli and Harun, Aizul Nahar and Omar Chong, Noraini (2018) Key issues in the management of the humanitarian aid distribution process during and post-disaster in Malaysia. Planning Malaysia, 16 (1). pp. 211-221. ISSN 1675-6215

Mohd. Abdullah, Haris Iskandar and Ibrahim, Zul Azri and Abdul Rahim, Fiza and Fadzil, Hafizuddin Shahril and Sharul Nizam, Saiful Amin and Mustaffa, Muhammad Zulhusni (2022) Digital forensics investigation procedures of smart grid environment. International Journal of Computing and Digital Systems, 11 (1). pp. 1071-1082. ISSN 2210-142X

Mohd. Ali, Nur Syazwani and Hamzah, Khaidzir and Idris, Faridah and Sazali, Muhammad Arif and Sarkawi, Muhammad Syahir and Basri, Nor Afifah and Jamaluddin, Khairulnadzmi and Zainal, Jasman (2022) Characterization of ANFIS-SC method on power peaking factor. Journal Of Nuclear And Related Technologies, 19 (1). pp. 31-36. ISSN 1823-0180

Mohd. Ali, R. and Benk, S. and Budak, T. and Mohd. Isa, K. and Yussof, S. H. (2017) A cross-cultural study of religiosity and tax compliance attitudes in Malaysia and Turkey. eJournal of Tax Research, 15 (3). pp. 490-505. ISSN 1448-2398

Mohd. Aliff, Mohd. Aliff and Fitri Danieal, Fitri Danieal and Mohamed, Mohd. Firdaus and Ahmad 'Athif, Ahmad 'Athif and Tetsuya, Akagi and Nor Samsiah, Nor Samsiah (2020) Development of flexible pneumatic rehabilitation actuator for knee injury. Test Engineering And Management, 83 . pp. 12849-12855. ISSN 0193-4120

Mohd. Aman, Azana Hafizah and Hassan, Wan Haslina and Sameen, Shilan and Attarbashi, Zainab Senan and Alizadeh, Mojtaba and Abdul Latiff, Liza (2021) IoMT amid COVID-19 pandemic: Application, architecture, technology, and security. Journal of Network and Computer Applications, 174 . p. 102886. ISSN 1084-8045

Mohd. Amin, Mohd. For and Chan, Sook Huei and Md Rafik, Abdul Ghani (2009) Rippability classification for quartzite based on specific energy and field production rate. Malaysian Journal of Civil Engineering, 21 (1). pp. 42-54.

Mohd. Anuar, Mohd. Syahid and Kadir, Muhammad Solihin (2022) A comparative study on plant disease detection using machine learning algorithm. Open International Journal Of Informatics (OIJI), 10 (2). pp. 117-123. ISSN 2289-2370

Mohd. Aras, Mohd. Shahrieel and Abdullah, Shahrum Shah and Abdul Rahman, Ahmad Fadzli Nizam and Hasim, Norhaslinda and Abdul Azis, Fadilah and Lim, Wee Teck and Mohd. Nor, Arfah Syahida (2015) Depth control of an underwater remotely operated vehicle using neural network predictive control. Jurnal Teknologi, 74 (9). pp. 85-93. ISSN 0127-9696

Mohd. Ariff, Mohd. Farid and Majid, Zulkepli and Chong, Albert K. and Setan, Halim (2009) Photogrammetric-based security system. Geoinformation Science Journal, 9 (1). pp. 62-69. ISSN 1511-9491

Mohd. Arof, Khairul Zahreen and Awang, Mohd. Daud and Abd. Rashid, Mohd. Hambali and Ismail, Syuhaida (2021) Coronavirus 2019 (COVID-19) outbreak lockdown: the effect on spiritual, physical, emotional, intellectual and financial states of the Muslim believers. Islamic Thought and Civilization (JITC), 11 (2). pp. 389-399. ISSN 2075-0943

Mohd. Arof, Khairul Zahreen and Ismail, Syuhaida and Saleh, Abd. Latif (2018) Critical success factors of contractor’s performance appraisal system in Malaysian construction industry. Indian Journal of Public Health Research and Development, 9 (11). pp. 1197-1206. ISSN 0976-0245

Mohd. Azmi, Nurulhuda Firdaus and Ab. Rahim, Nor Zairah and Ali, Rosmah and Mahmoud Al-Raheem, Yousif Osama (2018) A systematic literature review of software help systems limitations. Indian Journal of Science and Technology, 11 (4). pp. 1-8. ISSN 0974-6846

Mohd. Baharin, Rasyidah Hanan and Uno, Toru and Arima, Takuji and Zainuddin, Norsiha and Yamada, Yoshihide and Kamardin, Kamilia and Michishita, Naobumi (2019) Effects of the permittivity and conductivity of human body for normal-mode helical antenna performance. IEICE Electronics Express, 16 (16). pp. 1-6. ISSN 1349-2543

Mohd. Bakhori, Siti Nadia and Hassan, Mohamad Zaki and Abdul Aziz, Sa’ardin and Sheikh Md. Fadzulah, Siti Hajar and Ahmad, Fauzan (2018) Tensile properties of jute-polypropylene composites. Chemical Engineering Transactions, 63 . pp. 727-732. ISSN 2283-9216

Mohd. Bakhori, Siti Nadia and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Hassan, Mohamad Zaki (2017) Tensile properties for MWCNT filled jute-epoxy composites. Journal of Advanced Research in Applied Mechanics, 31 (1). pp. 16-21. ISSN 2289-7895

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abd. Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure: formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 1823-4208

Mohd. Daud, Salwani (2011) Sustainable human development: bi’ah salihah index in Al-Amin education system. PERINTIS e-Journal, 1 . pp. 36-43. ISSN 2232-0725

Mohd. Ghani, Nuritaasma and Selamat, Hazlina and Khamis, Nurulaqilla and Ghazalli, Shuwaibatul Aslamiah (2020) Crowd modelling validation for modified social force model. International Journal of Integrated Engineering, 12 (2). pp. 10-18. ISSN 2229-838X

Mohd. Hamzah, Mohd. Faizal and Mohd. Rijal, Omar and Kimura, Kozo and Mohd. Noor, Norliza (2019) Malaysian women shoe sizing system using multivariate normal probability distribution. IEEE Access, 7 . pp. 142726-142737. ISSN 2169-3536

Mohd. Hanapiah, N. and Mohd. Zaki, Noor Irza and Abu Husain, M. K. and Mukhlas, N. A. (2022) Green building in existing development: a review of current status, challenges, and implementation strategy. Civil Engineering and Architecture, 10 (7). pp. 3135-3146. ISSN 2332-1091

Mohd. Ideris, Ahmad Tarmidzi and Mohd. Aris, Siti Armiza and A. Jalil, Siti Zura and Bani, Nurul Aini and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil (2018) Heat exposure assessment among warship technicians in machinery room. Journal Of Advanced Research In Occuptional Safety And Health, 1 (1). pp. 19-23. ISSN 2637-0255

Mohd. Idrus, N. H. and Musa, M. N. and Yahya, W. J. and Ithnin, A. M. (2017) Geo-Ocean Thermal Energy Conversion (GeOTEC) power cycle/plant. Renewable Energy, 111 . pp. 372-380. ISSN 0960-1481

Mohd. Ishak, Noriah and Ariffin, Siti Rahayah and Din, Rosseni and Abd. Karim, Aidah (2002) Expanding the traditional classroom through computer technology : collaborative learning in graduate social science courses. Jurnal Teknologi 37 (E), 37 . pp. 17-28.

Mohd. Ishar, Mohamad Izzuan and Ismawi, Siti Nur Madeehah and Naldo Janius, Naldo Janius (2022) Workability elements of post-diploma students in construction technology from vocational colleges in Malaysia. Journal Of Technical And Social Studies (Juteks E-Journals), 21 (1). pp. 17-20. ISSN 2716-6740

Mohd. Ismail, Kamsiah and Radin Salim, Kamilah and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah and Abdullah, Morina and Mohamed, Zainai (2018) Evaluation of laboratory facilities for engineering technology programs in Malaysian technical universities. International Journal Of Social Science Studies, 6 (5). pp. 65-73. ISSN 2324-8033

Mohd. Ismail, Mohd. Ismifaizul and Dziyauddin, Rudzidatul Akmam and Ahmad, Robiah and Ahmad, Norulhusna and Ahmad, Noor Azurati and Abdul Hamid, Afifah Maheran (2021) A review of energy harvesting in localization for wireless sensor node tracking. IEEE Access, 9 . pp. 60108-60122. ISSN 2169-3536

Mohd. Izhar, M. A. and Aljohani, A. and Ng, S. X. and Hanzo, L. (2017) Distributed joint source coding and trellis coded modulation for symbol-based Markov sources. IEEE Transactions on Vehicular Technology . ISSN 0018-9545 (In Press)

Mohd. Izhar, M. A. and Babar, Z. and Ng, S. X. and Hanzo, L. (2017) Entanglement-assisted classical communication over quantum channels for binary Markov sources. IEEE Transactions on Vehicular Technology . ISSN 0018-9545 (In Press)

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2009) Propelan pepejal kalium nitrat difabrikasi kaedah pengacuanan mampat. Jurnal Teknologi, 50 (F). pp. 41-51. ISSN 2180-3722

Mohd. Jamari, Siti Khumaira and Nordin, Nur Azmah and Ubaidillah, U. and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Nazmi, Nurhazimah (2021) Enhancement of the rheological properties of magnetorheological elastomer via polystyrene-grafted carbonyl iron particles. Journal of Applied Polymer Science, 138 (34). p. 50860. ISSN 0021-8995

Mohd. Jamari, Siti Khumaira and Nordin, Nur Azmah and Ubaidillah, Ubaidillah and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah and Mazlan, Saiful Amri (2020) Systematic review on the effects, roles and methods of magnetic particle coatings in magnetorheological materials. Materials, 13 (23). pp. 1-21. ISSN 1996-1944

Mohd. Latip, Hadafi Fitri and Rosman, Amirul Asyraf (2022) Mobile application for horse training program system. Journal of Human Centered Technology, 1 (2). pp. 48-53. ISSN 2821-3467

Mohd. Mokhtar, Nurul Farhanah and Nordin, Mariam Firdhaus Mad and Morad, Noor Azian (2018) Total phenolic content, total flavonoid content and radical scavenging activity from zingiber zerumbet rhizome using subcritical water extraction. International Journal of Engineering, Transactions B: Applications, 31 (8). pp. 1421-1429. ISSN 1728-144X

Mohd. Nani, S. Z. and Jaafar, A. and Majid, A. A. A. and Mahdzir, A. and Musa, M. N. (2019) Effects of deep sea water on anti-obesity properties in induction of beige adipocytes. Current Chemical Biology, 13 (1). pp. 38-48. ISSN 2212-7968

Mohd. Nasir, Amalin A’ishah and Azri, Suhaibah and Ujang, Uznir (2022) Managing 3D asset management using CityGML concept. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 139-147. ISSN 0128-1666

Mohd. Nasir, N. A. and Nazmi, N. and Mohamad, N. and Ubaidillah, U. and Nordin, N. A. and Mazlan, S. A. and Abdul Aziz, S. A. (2021) Rheological performance of magnetorheological grease with embedded graphite additives. Materials, 14 (17). ISSN 1996-1944

Mohd. Nawi, M. N. and Roslan, S. and Salleh, N. A. and Zulhumadi, F. and Harun, A. N. (2016) The benefits and challenges of E-procurement implementation: A case study of Malaysian company. International Journal of Economics and Financial Issues, 6 (7Speci). pp. 329-332. ISSN 2146-4138

Mohd. Noh, Muhammad Ramzanee and Shuib, Rambat and Abd. Halim, Ida Sharmiza (2022) GIS based seismic vulnerability assessment in tourist attractions area: a case study in Bukit Tinggi, Pahang, Malaysia. Disaster Advances, 15 (4). pp. 1-12. ISSN 0974-262X

Mohd. Noor, Azizi and Nik Mahmood, Nik Hasnaa and Wan Zakaria, Wan Normeza (2021) The mediating effect of intention to use on the relationship between mobile learning application and knowledge and skill usage. Asian Social Science, 17 (12). pp. 31-48. ISSN 1911-2017

Mohd. Noor, Noorliza and Mohd. Rijal, Omar and Yunus, Ashari and Syed Abu Bakar, Syed Abdul Rahman (2010) A discrimination method for the detection of pneumonia using chest radiograph. Computerized Medical Imaging and Graphics, 34 (2). 160 - 166. ISSN 0895-6111

Mohd. Noor, Nor Farid and Yusoff, Mohamad Ezany and Abdul Rahman, Mohd. Azizi and Alam, Mohammad Khursheed and Harun, Ahmad Mukifza (2021) The disinfectant effect of modified hydrothermal nanotitania extract on candida albicans. BioMed Research International, 2021 . p. 6617645. ISSN 2314-6133

Mohd. Noor, Norhayati and Mohd. Mahdzir, Akbariah and Malek, Zulkifle and Abdul Karim, Aidah (2020) Adaptation of family counseling implementation in school setting to meet student wellbeing need: A qualitative research. Universal Journal Of Educational Research, 8 (12A). pp. 7792-7801. ISSN 2332-3213

Mohd. Noor, Norliza and Yunus, Ashari and Syed Abu Bakar, Syed Abdul Rahman and Hussin, Amran and Mohd. Rijal, Omar (2010) Applying a statistical PTB detection procedure to complement the gold standard. Computerized Medical Imaging and Graphics, 35 (3). 186 - 194. ISSN 0895-6111

Mohd. Noor, Nur Qamarina and Jamaludin, Azi Azwady and Azizan, Azizul and Abas, Hafiza and Kamardin, Kamilia and Mohd. Yakub, Mohd. Fitri (2018) Arduino vs raspberry Pi vs micro bit: platforms for fast IoT systems prototyping. Open International Journal of Informatics (OIJI), 6 (1). pp. 1-12. ISSN 2289-2370

Mohd. Nor, Ariff Farhan and Hassan, Mohamad Zaki and A. Rasid, Zainudin and Abdul Aziz, Sa’ardin and Sarip, Shamsul and Md. Daud, Mohd. Yusof (2021) Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design. Applied Composite Materials, 28 (3). pp. 607-632. ISSN 0929-189X

Mohd. Nor, Muhamamd Izzat Amir and Mohd. Izhar, Mohd. Azri and Ahmad, Norulhusna and Mad Kaidi, Hazilah (2018) Joint Source Channel Decoding exploiting 2D source correlation with parameter estimation for image transmission over Rayleigh fading channels. International Journal of Integrated Engineering, 10 (7). pp. 332-344. ISSN 2229-838X

Mohd. Nor, Muhammad Izzat Amir and Mohd. Izhar, Mohd. Azri and Ahmad, Norulhusna and Md. Kaidi, Hazilah (2018) Exploiting 2-dimensional source correlation in channel decoding with parameter estimation. International Journal of Electrical and Computer Engineering, 8 (4). pp. 2633-2642. ISSN 2088-8708

Mohd. Rasidek, N. A. and Mad Nordin, M. F. and Shameli, K. (2016) Formulation and evaluation of semisolid jelly produced by Musa acuminata Colla (AAA Group) peels. Asian Pacific Journal of Tropical Biomedicine, 6 (1). pp. 55-59. ISSN 2221-1691

Mohd. Rasidek, Noor Azwani and Mad Nordin, Mariam Firdhaus and Iwamoto, Koji and Abd. Rahman, Norazah and Nagatsu, Yuichiro and Tokuyama, Hideaki (2018) Rheological flow models of banana peel pectin jellies as affected by sugar concentration. International Journal of Food Properties, 21 (1). pp. 2087-2099. ISSN 1094-2912

Mohd. Rijal, Omar and Mohd. Noor, Norliza and Chang, Yun Fah (2001) Critical remarks on some applications of digital image analysis with emphasis on statistical methodology. Jurnal Teknologi D (35D). pp. 1-14. ISSN 0127-9696

Mohd. Rijal, Omar and Mohd. Hamzah, Mohd. Faizal and Sankaraiah, S. and Mohd. Noor, Norliza (2018) A three dimensional foot fourier descriptors model. ARPN Journal of Engineering and Applied Sciences, 13 (13). pp. 4042-4056. ISSN 1819-6608

Mohd. Rusli, Hazlifah and Kama, Mohd. Nazri and Mohamad Sasudin, Muhammad Imran (2022) Monolith application to microservices model driven analysis migration: state-of-the-art techniques. Open International Journal Of Informatics, 10 (1). pp. 124-132. ISSN 2289-2370

Mohd. Sahardi, Nur Fatin Nabilah and Jaafar, Faizul and Zakaria, Siti Nor Asyikin and Tan, Jen Kit and Mad Nordin, Mariam Firdhaus and Makpol, Suzana (2021) Comparison of the antioxidant activity of Malaysian ginger (Zingiber officinale Roscoe) extracts with that of selected natural products and its effect on the viability of myoblast cells in culture. Sains Malaysiana, 50 (5). pp. 1445-1456. ISSN 0126-6039

Mohd. Sam, Suriani and Kamardin, Kamilia and Azizan, Azizul and Mohamed, Norliza and Ahmed, Irfanuddin Shafi and Taj R., Noureen (2018) System for improving sleep quality by using internet of things. Open International Journal of Informatics (OIJI), 6 (3). pp. 21-31. ISSN 2289-2370

Mohd. Sam, Suriani and Mohamed, Norliza and Islam Wasi, Md. Wasif (2022) A review of DDoS attacks and defenses in IoT. Open International Journal Of Informatics (OIJI), 10 (2). pp. 1-11. ISSN 2289-2370

Mohd. Sam, Suriani and Mohamed, Norliza and Shafi, Irfanuddin and Hassan, Noor Hafizah and Azizan, Azizul and Taj, Noureen (2022) Review of indoor localization based services (ILBS) and its applications. Open International Journal Of Informatics (OIJI), 10 (1). pp. 97-113. ISSN 2289-2370

Mohd. Shahar, Siti Fatimah and Mazlan, Saiful Amri and Johari, Norhasnidawani and Johari, Mohd. Aidy Faizal and Abdul Aziz, Siti Aishah and Ahmad Khairi, Muntaz Hana and Nordin, Nur Azmah and Mohd. Hapipi, Norhiwani (2022) Mechanical properties and microstructural behavior of uniaxial tensile-loaded anisotropic magnetorheological elastomer. Actuators, 11 (11). pp. 1-13. ISSN 2076-0825

Mohd. Shatar, Nursyahirah and Abdul Rahman, Mohd. Azizi and Muhtazaruddin, Mohd. Nabil and Shaikh Salim, Sheikh Ahmad Zaki and Singh, Baljit and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Mohd. Saudi, Ahmad Shakir and Ardila Rey, Jorge Alfredo (2019) Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate. Sustainability (Switzerland), 11 (22). p. 6192. ISSN 2071-1050

Mohd. Sukarnoor, Noor Idora and Lee, Kee Quen and Abu, Aminudin and Kuwano, Noriyuki and Kang, Hooi Siang and Mat Desa, Safari (2022) The effectiveness of helical strakes in suppressing vortex-induced vibration of tandem circular cylinders. Ain Shams Engineering Journal, 13 (1). pp. 1-10. ISSN 2090-4479

Mohd. Taib, Jamaludin (2002) Feature research : review and future direction. Jurnal Mekanikal (13). pp. 1-10. ISSN 0127-3396

Mohd. Tamrin, Mohd. Izzuddin and Che Azemin, Mohd. Zulfaezal and Md. Noor Rudin, Noor Fawazi and Mohd. Salleh, Mohd. Hazimin and Hilmi, Mohd. Radzi and Alwan, Ali Amer and Shah, Asadullah (2021) Predicting spatial displacement based on intraocular image design using convolution neural network – preliminary findings. Journal of Information Systems and Digital Technologies, 3 (1). pp. 74-82. ISSN 2682-8790

Mohd. Tobi, Siti Uzairiah and Fathi, Mohamad Syazli and Amaratunga, Dilanthi (2018) Ageing in place framework as reference guide for housing in Malaysia: Landed property. Planning Malaysia, 16 (1). pp. 130-143. ISSN 1675-6215

Mohd. Yakub, Mohd. Fitri and Che Daud, Zul-Hilmi and A. Rasid, Zainudin and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Syed Mohd. Putra, Sharifah Munawwarah (2018) Linear quadratic regulator based control device for active suspension system with enhanced vehicle ride comfort. Journal of the Society of Automotive Engineers Malaysia, 2 (3). pp. 289-305. ISSN 2550-2239

Mohd. Yunus, Masliza and Megat Mohd. Zainuddin, Norziha and Maarop, Nurazean and Ibrahim, Roslina and Che Mohd. Yusoff, Rasimah and Narayana Samy, Ganthan and Wan Hassan, Wan Azlan (2015) The heuristic evaluation on the internet safety guideline for primary school students. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 230-240. ISSN 1819-6608

Mohd. Yusof, Khairiyah (1992) Overview of single-input single-output distillation control. Buletin FKKKSA, 6 (2). pp. 34-39. ISSN 0128-0740

Mohd. Yusof, Mohd. Rashid and Abd. Rahim, Siti Hajar and Ammar, M. R. and Andenan, Nurnadia (2015) The effect of prekotAC on particle penetration through a PTFE filter media. Perintis E-Journal, 5 (1). pp. 22-23.

Mohd. Yusoff, Mohd. Rashid and Nasri, Noor Shawal and Abdullah, Abdul Hamid and Abdul Rahman, Mohd. Yaccob Khan (1990) Tragedi kebocoran gas ammonia di Melaka - satu tinjauan. Buletin FKKKSA, 4 (1). pp. 19-24. ISSN 0128-0740

Mohd. Yusop, Yuzlina and Othman, Nooraini (2021) Concepts in waste management: A preliminary study. International Journal of Academic Research in Business and Social Sciences, 11 (2). pp. 546-557. ISSN 2222-6990

Mohd. Yusop, Yuzlina and Othman, Nooraini (2019) Linking the Malaysia’s solid waste management policy instruments with household recycling behavior. International Journal of Academic Research in Progressive Education and Development, 8 (4). pp. 474-488. ISSN 2226-6348

Mohd. Yusuf, Shahir and Chen, Ying and Musa, Nur Hidayah and Mazlan, Nurainaa and Nordin, Nur Azmah and Nazmi, Nurhazimah and Mazlan, Saiful Amri and Gao, Nong (2022) Elimination of porosity in additively manufactured 316L stainless steel by high-pressure torsion. International Journal of Advanced Manufacturing Technology, 123 (3-4). 1175 -1187. ISSN 0268-3768

Mohd. Zain, Muhammad Rajaei Ahmad and Abdul Kari, Zulhisyam and Dawood, Mahmoud A. O. and Nik Ahmad Ariff, Nik Shahman and Zeti Norfidiyati Salmuna, Zeti Norfidiyati Salmuna and Ismail, Norzila and Ibrahim, Al Hafiz and Krishnan, Kumara Thevan and Che Mat, Nor Fazila and Edinur, Hisham Atan and Abdul Razab, Mohammad Khairul Azhar and Mohammed, Aurifullah and Mohamed Salam, Sirajudeen Kuttulebbai Naina and Rao, Pasupuleti Visweswara and Mohamad, Sakinah and Hamat, Basyarah and Zainal Abidin, Shahriman and Lee, Seong Wei and Ahmed Shokri, Amran (2022) Bioactivity and pharmacological potential of date palm (Phoenix dactylifera L.) against pandemic COVID-19: A comprehensive review. Applied Biochemistry and Biotechnology, 194 (10). pp. 4587-4624. ISSN 0273-2289

Mohd. Zain, N. A. and Suhaimi, M. S. and Idris, Ani (2007) Determination of effective diffusion coefficient of immobilized Baker's yeast invertase in various concentration of PVA-alginate matrix. Proceedings of the International Conference on Biotechnology Engineering ICBioE'07 . pp. 248-255.

Mohd. Zaki, Ain Zulaikha and Yakub, Fitri and Fakharulrazi, Alyani Nadhiya and Mamat, Normaisharah and Azizan, Azizul and Harun, Aizul Nahar and Abdul Rahim, Zulhasni (2021) Building a smart gardening system and plant monitoring using IoT. Journal of Sustainable Natural Resources (J-SuNR), 2 (1). pp. 1-6. ISSN 2716-7143

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Extreme structural response values from various methods of simulating wave kinematics. Ships and Offshore Structures, 11 (4). pp. 369-384. ISSN 1744-5302

Mohd. Zaki, N. I. and Che Husin, S. M. and Abu Husain, M. K. and Abu Husain, N. and Ma'aram, A. and Jusuf, A. and Carmai, J. and Ahmad, Y. and Abu Kassim, K. A. (2020) Development of anthropometric database for ASEAN NCAP: A case study of Malaysian children aged 6 years old. Journal of the Society of Automotive Engineers Malaysia, 4 (2). pp. 191-207. ISSN 2600-8092

Mohd. Zaki, Noor Irza and Abu Husain, Mohd. Khairi and Najafian, G. (2018) Extreme structural responses by nonlinear system identification for fixed offshore platforms. Ships and Offshore Structures, 13 . pp. 251-263. ISSN 1744-5302

Mohd. Zin, Abdullah Assuhaimi and Ismail, Nur ‘Ain Maiza and Muda, Zaniah and Jalalian, Mohamad (2009) CT compensation of numerical distance relaying algorithm. International Journal of Electrical & Computer Sciences (IJECS), 9 (9). pp. 31-37. ISSN 2077-1231

Mohebbi, R. and Rashidi, M. M. (2018) Forced convection of nanofluids in an extended surfaces channel using lattice Boltzmann method. International Journal of Heat and Mass Transfer, 117 . pp. 1291-1303. ISSN 0017-9310

Mohmad Shukri, Sharyzee and Wahab, Mohammad Hussaini and Jamala, Nurul (2021) The architectural concept of Malay Royal Town. Journal of Design and Built Environment, 21 (3). pp. 52-62. ISSN 1823-4208

Mohsenipour, Morteza and Shahid, Shamsuddin and Chung, Eun-sung and Wang, Xiao-jun (2018) Changing pattern of droughts during cropping seasons of Bangladesh. Water Resources Management, 32 (5). pp. 1555-1568. ISSN 0920-4741

Mohsi, N. F. M. and Apandi, A. and Noor, M. J. M. M. and Akhir, F. N. M. D. and Sugiura, N. and Utsumi, M. and Othman, N. and Zakaria, Z. and Hara, H. (2020) Elucidation of prazosin biodegradation by isolated bacillus spp. From the tropical environment. Journal of General and Applied Microbiology, 66 (1). pp. 8-14. ISSN 0022-1260

Mohsin, Rahmat and Nasri, Noor Shawal (1995) Calibration concept and equipment drifting factors: its application in gas metering facilities. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C15-1.

Moideen K, I. and Isloor, A. M. and Garudachari, B. and Ismail, A. F. (2016) The effect of glycine betaine additive on the PPSU/PSF ultrafiltration membrane performance. Desalination and Water Treatment, 57 (52). pp. 24788-24798. ISSN 1944-3994

Moideen K., I. and Isloor, A. M. and Ismail, A. F. and Obaid, A. and Fun, H. K. (2016) Fabrication and characterization of new PSF/PPSU UF blend membrane for heavy metal rejection. Desalination and Water Treatment, 57 (42). pp. 19810-19819. ISSN 1944-3994

Mokhtar, Munirah (1994) The effect of addition of LDPE on the melting and crystallization characteristics of pigmented PP. Buletin FKKKSA, 8 (1). pp. 43-49. ISSN 0128-0740

Mokhtar, Munirah (1995) Thermoplastics composites vs. thermoset composites. Buletin FKKKSA, 9 (1). pp. 24-26. ISSN 0128-0740

Mokhtar, Munirah and Ali, Nora'aini (1995) Thermoset plastics product recycling. Buletin FKKKSA, 9 (1). pp. 27-30. ISSN 0128-0740

Mokhtar, Iram Maisarah and Ahmad, Norulhusna and Kaidi, Hazilah Mad and Mohd. Izhar, Mohd. Azri and Mohamed, Norliza (2018) PAPR reduction techniques in generalized inverse discrete fourier transform non-orthogonal frequency division multiplexing system. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1045-1052. ISSN 2502-4752

Mondal, K. and Abu, A. and Toh, H. T. and Das, S. and Das, S. (2020) An improved all-pass filtered x least mean square algorithm. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.5). pp. 178-184. ISSN 2278-3091

Mondal (Das), Kuheli and Das, Saurav and Abu, Aminudin and Hamada, Nozomu and oh, Hoong Thiam and Das, Saikat and Faris, Waleed Fekry (2018) All-pass filtered x least mean square algorithm for narrowband active noise control. Applied Acoustics, 142 . pp. 1-10. ISSN 0003-682X

Mopuri, Obulesu and Madhu, Raghunath Kodi. and Peram, Mohan Reddy and Ganteda, Charankumar and Lorenzini, Giulio and Che Sidik, Nor Azwadi (2022) Unsteady MHD on convective flow of a newtonian fluid past an inclined plate in presence of chemical reaction with radiation absorption and dufour effects. CFD Letters, 14 (7). pp. 62-76. ISSN 2180-1363

Morad, Noor Azian and Abu Hasan, Adilah (1993) Specific heat capacity of pure triglycerides by differential scanning calorimeter. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 2-6.

Morad, Noor Azian and Long, Kamariah and Abdul Rahim, Nurul Izzah (2015) Rice bran water extraction through autoclaving and sonication protein content and amino acid profile. Journal Of Applied Science And Agriculture, 10 (5). pp. 97-103. ISSN 1816-9112

Morad, Noor Azian (1988) Titisan tunggal dalam penyarian cecair-cecair. Buletin FKKKSA, 1 (2). pp. 27-39. ISSN 0128-0740

Morad, Noor Azian and Abdul Aziz, Mustafa Kamal and Sabri, Abu Safian and Ismail, Buliam (1989) Palm kernel oil leaching. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 432-442.

Morad, Noor Azian and Idrees, Mohammad and Abu Hassan, Adilah (1994) Measurement of vapor pressure of palm oil constituents under vacuum. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Moradihamedani, P. and Kalantari, K. and Abdullah, A. H. and Morad, N. A. (2016) High efficient removal of lead(II) and nickel(II) from aqueous solution by novel polysulfone/Fe3O4–talc nanocomposite mixed matrix membrane. Desalination and Water Treatment, 57 (59). pp. 28900-28909. ISSN 1944-3994

Morshed, T. and Kai, Y. and Matsumura, R. and Park, J. H. and Chikita, H. and Sadoh, T. and Hashim, A. M. (2016) Formation of germanium (111) on graphene on insulator by rapid melting growth for novel germanium-on-insulator structure. Materials Letters, 168 . pp. 223-227. ISSN 0167-577X

Moshiul, A. M. and Mohammad, R. and Anjum, H. F. and Yesmin, A. and Chelliapan, S. (2021) The evolution of green shipping practices adoption in the international maritime industry. TEM Journal, 10 (3). ISSN 2217-8309

Moshiul, A. M. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Review of sulphur emission from international shipping - effects and regulatory global abatement steps. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 924-933. ISSN 0976-6359

Mousavi, Seyedeh Elaheh and Younesi, Habibollah and Bahramifar, Nader and Tamunaidu, Pramila and Karimi-Maleh, Hassan (2022) A novel route to the synthesis of a-Fe2O3@C@SiO2/TiO2 nanocomposite from the metal-organic framework as a photocatalyst for water treatment. Chemosphere, 297 (NA). pp. 1-15. ISSN 0045-6535

Moy, Chun Hung and Tan, Lian See and Shoparwe, Noor Fazliani and Mohd. Shariff, Azmi and Tan, Jully (2021) Comparative study of a life cycle assessment for bio-plastic straws and paper straws: Malaysia’s perspective. Processes, 9 (6). p. 1007. ISSN 2227-9717

Mubarak, N. M. and Abdullah, E. C. and Sahu, J. N. and Jayakumar, N. S. (2015) Mass production of carbon nanofibers using microwave technology. Journal of Nanoscience and Nanotechnology, 15 (12). pp. 9571-9577. ISSN 1533-4880

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. (2016) Plam oil empty fruit bunch based magnetic biochar composite comparison for synthesis by microwave-assisted and conventional heating. Journal of Analytical and Applied Pyrolysis, 120 . pp. 521-528. ISSN 0165-2370

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. and Ganesan, P. (2015) Microwave assisted multiwall carbon nanotubes enhancing Cd(II) adsorption capacity in aqueous media. Journal of Industrial and Engineering Chemistry, 24 . pp. 24-33. ISSN 1226-086X

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. and Ganesan, P. (2016) Microwave-assisted synthesis of multi-walled carbon nanotubes for enhanced removal of Zn(II) from wastewater. Research on Chemical Intermediates, 42 (4). pp. 3257-3281. ISSN 0922-6168

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. (2015) Novel microwave-assisted multiwall carbon nanotubes enhancing Cu (II) adsorption capacity in water. Journal of the Taiwan Institute of Chemical Engineers, 53 . pp. 140-152. ISSN 1876-1070

Mucsi, V. and Ayub, A. S. and Muhammad-Sukki, F. and Zulkipli, M. and Muhtazaruddin, M. N. and Saudi, A. S. M. and Ardila-Rey, A. (2020) Lightning protection methods for wind turbine blades: an alternative approach. Applied Sciences (Switzerland), 10 (6). ISSN 2076-3417

Muhalim, N. A. D. B. and Daud, M. Y. B. M. and Hassan, M. Z .B. and Aziz, S. B. A. and Raman, N. B. A. and Sarip, S. B. (2017) Compressive behaviour and energy absorption of copper tube under quasi-static and ultrasonic compression test. Journal of Mechanical Engineering, SI 3 (1). pp. 169-184. ISSN 1823-5514

Muhamad, M. A. H. and Che Hassan, R. and Md. Said, N. and Ooi, J. L. S. (2021) Seagrass habitat suitability model for Redang Marine Park using multibeam echosounder data: testing different spatial resolutions and analysis window sizes. PLoS ONE, 16 (9). ISSN 1932-6203

Muhamad, M. N. B. and Mohammad, R. and Othman, N. and Kadir, Z. A. (2020) Risk assessment of abrasive blasting environment in pressure vessel fabrication plants. Journal of Environmental Treatment Techniques, 8 (1). pp. 455-470. ISSN 2309-1185

Muhamad, P. and Unuh, M. H. and Waziralilah, N. F. and Amran, M. H. (2019) Characterization of vehicle smart fluid using gas chromatography-mass spectrometry (gcms). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 240-248. ISSN 2289-7879

Muhamad, W. Z. A. W. and Jamaludin, K. R. and Yahya, Z. R. and Ramlie, F. (2017) A hybrid methodology for the mahalanobis-taguchi system using random binary search-based feature selection. Far East Journal of Mathematical Sciences, 101 (12). pp. 2663-2675. ISSN 0972-0871

Muhamad, W. Z. A. W. and Ramlie, F. and Jamaludin, K. R. (2017) Mahalanobis-Taguchi system for pattern recognition: A brief review. Far East Journal of Mathematical Sciences, 102 (12). pp. 3021-3052. ISSN 0972-0871

Muhamad Taib, Suzana and Wan Zin, Wan Zawiah and Zahari, Marina and Md Illias, Rosli and Hassan, Osman (2005) Application of statistical method for screening of factors influencing the production of cyclodextrin from sago starch using combination of pullulanase and CGTase enzymes. Journal of Food Technology, 3 (4). pp. 538-541.

Muhammad, Muhammad Khairul Rijal and Mohd. Azmi, Nurulhuda Firdaus and Amir Sjarif, Nilam Nur and Ismail, Saiful Adli and Ya’acob, Suraya and Che Mohd. Yusof, Rasimah (2018) Visual analytics with decision tree on network traffic flow for botnet detection. International Journal of Advances in Soft Computing and its Applications, 10 (3). pp. 73-91. ISSN 2074-2827

Muhammad, Mustapha Salisu and Abdul-Wahab, Mohd Firdaus and Saidin, Mohammad Abdul Razis and Asraf, Muhammad Hariz and Nik Malek, Nik Ahmad Nizam (2020) Microbiological analysis of drinking water from water vending machines. Malaysian Journal of Fundamental and Applied Sciences, 16 (2). pp. 186-189. ISSN 2289-5981

Muhammad, N. M. and Japar, W. M. A. A. and Yusof, S. N. A. and Asako, Y. and Faghri, M. and Tan, L. K. and Sidik, N. A. C. (2021) Validity of performance factors used in recent studies on heat transfer enhancement of nanofluids. Journal of Heat Transfer, 143 (8). ISSN 0022-1481

Muhammad Abdullahi, Muhammad Abdullahi and Othman, Nooraini (2021) Influence of different learning environments in the implementation of technical vocational education and training policy in Nigeria. International Journal of Academic Research in Progressive Education and Development, 10 (2). pp. 687-702. ISSN 2226-6348

Muhammad Tahir, Muhammad and Haron, Nuzul Azam and Harun, Aizul Nahar and Muhammad, Isa Bala and Baba, Dorothy L. (2018) Improving cost and time control in construction using building information model (Bim): A review. Pertanika Journal of Science and Technology, 26 (1). pp. 21-36. ISSN 0128-7680

Muhammad-Sukki, Firdaus and Farooq, Haroon and Abu-Bakar, Siti Hawa and Ardila-Rey, Jorge Alfredo and Sellami, Nazmi and Kilpatrick, Ciaran and Muhtazaruddin, Mohd Nabil and Bani, Nurul Aini and Muhammad Zulkipli, Muhammad Zulkipli (2021) Mathematical modelling of a static concentrating photovoltaic: Simulation and experimental validation. Applied Sciences (Switzerland), 11 (9). p. 3894. ISSN 2076-3417

Muhazeli, N. S. and Nordin, N. A. and Mazlan, S. A. and Abdul Aziz, S. A. and Ubaidillah, U. and Nazmi, N. (2021) Mini review: an insight on the fabrication methods of smart magnetic polymer foam. Journal of Magnetism and Magnetic Materials, 534 . ISSN 0304-8853

Muhazeli, Noor Sahirah and Nordin, Nur Azmah and Ubaidillah, Ubaid and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah and Yahya, Iwan (2020) Magnetic and tunable sound absorption properties of an in-situ prepared magnetorheological foam. Materials, 13 (24). pp. 1-16. ISSN 1996-1944

Muhd. Akhir, A. W. and Sarip, S. and Abd. Fatah, A. Y. (2020) Strategy to develop centre of accreditation of excellence (CARE) with industrial-based recognition. International Journal of Emerging Trends in Engineering Research, 8 (1.1). pp. 27-35. ISSN 2347-3983

Muhd. Akhir, Asymal Wajdi and Ismail, Syuhaida and Fathi, Mohd. Syazli and Sarip, Shamsul (2021) Centre of accreditation and recognition of excellence (CARE): Managing scope of technical and vocational education and training (TVET) courses towards industrial-based recognition. Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 1790-1796. ISSN 1309-4653

Muherei, M. A. and Junin, Radzuan (2007) Potential of anionic-nonionic surfactant mixtures for oilwell contaminated drillcuttings washing. Emirates Journal for Engineering Research, 12 (3). pp. 23-34.

Muherei, M. A. and Junin, Radzuan (2007) Potential of surfactant washing to solve drilling waste environmental problems offshore. Emirates Journal for Engineering Research, 12 (2). pp. 1-10.

Muherei, Mazen Ahmed and Junin, Radzuan (2007) Effect of electrolyte on synergism of anionic-nonionic surfactant mixture. Journal of Applied Sciences, 7 (10). pp. 1362-1371. ISSN 1812-5654

Muherei, Mazen Ahmed and Junin, Radzuan (2009) Investigating synergism in critical micelle concentration of anionic-nonionic surfactant mixtures: Surface versus interfacial tension techniques. Asian Journal of Applied Science, 2 (2). pp. 115-127. ISSN 1966-3343

Muhtazaruddin, M. N. and Bani, N. A. and Muhammad Sukki, F. and Jamian, J. J. and Abu Bakar, S. H. (2017) Impact of dispersed generation modes in optimal coordination between distributed generation and capacitor simultaneously. International Journal of Simulation: Systems, Science and Technology, 17 (41). 26.1-26.5. ISSN 1473-8031

Muhtazaruddin, M. N. B. and Bani, N. A. and Aris, S. A. M. and Jalil, S. Z. A. and Kaidi, H. M. and Fatah, A. Y. A. and Jamian, J. J. and Muhammad Sukki, F. and Abu Bakar, S. H. (2017) Distribution power loss minimization via distributed generation, capacitor and network reconfiguration. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 488-495. ISSN 2502-4752

Mukhlas, N. A. and Mohd. Zaki, Noor Irza and Abu Husain, Mohd. Khairi and Najafian, G. (2018) Efficient derivation of extreme offshore structural response exposed to random wave loads. Ships and Offshore Structures, 13 (7). pp. 719-733. ISSN 1744-5302

Mukhlas, Nurul Azizah and Mohd. Zaki, Noor Irza and Abu Husain, Mohd. Khairi and Syed Ahmad, Sayyid Zainal Abidin and Najafian, Gholamhossein (2022) Efficient derivation of extreme non-gaussian stochastic structural response using finite-memory nonlinear system. Part 2: model validation. Ships and Offshore Structures, 17 (6). pp. 1209-1223. ISSN 1744-5302

Mulop, Normah (1992) The many faces of activated carbon. Buletin FKKKSA, 6 (1). pp. 10-14. ISSN 0128-0740

Mulop, Normah and Abdul Aziz, Ramlan (1994) Perbandingan penghasilan karbon teraktif dengan kaedah fizikal dan kaedah kimia. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Muminov, Z. and Fudziah, I. (2016) Threshold resonances and eigenvalues of some schrödinger operators on lattices. Malaysian Journal of Mathematical Sciences, 10 . pp. 389-407. ISSN 1823-8343

Muminov, M. E. and Rasulov, T. Kh. (2015) An eigenvalue multiplicity formula for the Schur complement of a 3 x 3 block operator matrix. Siberian Mathematical Journal, 56 (4). pp. 699-713. ISSN 0369-8203

Munir, A. B. (2017) Wind power potentials in Cameroon and Nigeria: lessons from South Africa. Energies, 10 (4). ISSN 1996-1073

Munir, Sabra and Imam, Awais and Abdul Rasid, Siti Zaleha and Jamil, Farrukh and Aamir, Muhammad (2020) Impact of knowledge sharing behaviour on performance of auditing firms in Pakistan: moderating role of organizational culture. International Journal of Psychosocial Rehabilitation, 24 (6). pp. 9312-9331. ISSN 1475-7192

Muraoka, M. and Susuki, N. and Yamaguchi, H. and Tsuji, T. and Yamamoto, Y. (2016) Protocol for measuring the thermal properties of a supercooled synthetic sandwater-gas-methane hydrate sample. Journal of Visualized Experiments, 2016 (109). ISSN 1940-087X

Muridan, N. and Lah, A. A. A. and Yusoff, N. M. and Abdullah, F. and Hamzah, A. and Sulaiman, A. H. (2021) Investigation of multiwavelength performance based on different SOAs. International Journal of Integrated Engineering, 13 (4). pp. 92-103. ISSN 2229-838X

Muridan, Norasmahan and Sulaiman, Abdul Hadi and Abdullah, Fairuz and Md. Yusoff, Nelidya (2021) Effect of polarization adjustment towards the performance of SOA-based multiwavelength fiber laser. Optik, 242 (NA). pp. 1-9. ISSN 0030-4026

Musa, A. and Ahmad, M. B. and Hussein, M. Z. and Mohd. Izham, S. and Shameli, K. and Abubakar Sani, H. (2016) Synthesis of Nanocrystalline Cellulose Stabilized Copper Nanoparticles. Journal of Nanomaterials, 2016 . ISSN 1687-4110

Musa, Mohd. Aliff Farhan and Musa, Rafizah (2018) Evaluation of residential satisfaction towards building maintenance at rumah Sekangorku Damai Utama. Journal Of Advanced Research Design, 46 (1). pp. 23-29. ISSN 2289-7984

Muslim, M. T. and Selamat, H. and Alimin, A. J. and Haniff, M. F. (2017) Manifold absolute pressure estimation using neural network with hybrid training algorithm. PLoS ONE, 12 (11). ISSN 1932-6203

Mussa, Z. H. and Al-Qaim, F. F. and Othman, M. R. and Abdullah, M. P. and Latip, J. and Zakria, Z. (2017) Pseudo first order kinetics and proposed transformation products pathway for the degradation of diclofenac using graphite–PVC composite as anode. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 37-44. ISSN 1876-1070

Mussa, Z. H. and Al-Qaim, F. F. and Yuzir, A. and Shameli, K. (2020) Electrochemical degradation of metoprolol using graphite-pvc composite as anode: elucidation and characterization of new by-products using LC-TOF/MS. Journal of the Mexican Chemical Society, 64 (3). pp. 165-180. ISSN 1870-249X

Mussa, Z. H. and Qaim, F. A. and Yuzir, A. and Shameli, K. (2021) Photocatalytic removal of malachite green and brilliant blue dyes from its aqueous solution: a case study of factorial experimental design. Journal of the Mexican Chemical Society, 65 (2). ISSN 1870-249X

Mussa, Z. H. and Al-Qaim, F. F. and Othman, M. R. and Abdullah, M. P. and Latip, J. and Zakria, Z. (2017) Pseudo first order kinetics and proposed transformation products pathway for the degradation of diclofenac using graphite-PVC composite as anode. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 37-44. ISSN 1876-1070

Mustafa, Azeman (1994) Effect of air-preheating on NOx emissions from a gas turbine combustor. Buletin FKKKSA, 8 (1). pp. 50-61. ISSN 0128-0740

Mustafa, Azeman (1993) Effect of combustor inlet temperature and flame stabilizer pressure loss on weak extinction characteristics of premixed flames. Buletin FKKKSA, 7 (1). pp. 27-30. ISSN 0128-0740

Mustafa, Azeman (1994) Improving boiler operation without additional capital investment. Buletin FKKKSA, 8 (2). pp. 1-5. ISSN 0128-0740

Mustafa, Mohd. Wazir and Magaji, Nuraddeen (2009) Optimal location of static var compensator device for damping oscillations. American Journal of Engineering and Applied Sciences, 2 (2). 353- 359. ISSN 1941-7020

Mustafa, Mohd. Wazir and Magaji, Nuraddeen and Muda, Zaniah (2009) TCSC control of power system oscillation and analysis using eigenvalue techniques. International Journal of Engineering & Technology (IJET), 9 (10). pp. 47-53. ISSN 1793-8244 (online) ; 1793-8236 (print)

Mustafa, Mohd. Wazir and Wong, Yan Chiew (2008) Optimal placement of static VAR compensator using genetic algorithms. Elektrika, 10 (1). pp. 26-31. ISSN 0128-4428

Mustakeng, Nur Nazira and Maarop, Nurazean and Illias, Nur Hasniza and Samy, Ganthan Narayana and Magalingam, Pritheega and Kamaruddin, Norshaliza (2022) Towards conceptual model of social media use for flash flood preparedness in Klang Valley. Journal of Theoretical and Applied Information Technology, 100 (18). pp. 5481-5491. ISSN 1992-8645

Mustapa, M. S. and Salim, S. A. Z. S. and Ali, M. S. M. and Rijal, H. B. (2017) Investigation of thermal comfort at different temperature settings for cooling in university building. Journal of Mechanical Engineering, SI 4 (4). pp. 123-134. ISSN 1823-5514

Mustapa, M. S. and Zaki, S. A. and Rijal, H. B. and Hagishima, A. and Ali, M. S. M. (2016) Thermal comfort and occupant adaptive behaviour in Japanese university buildings with free running and cooling mode offices during summer. Building and Environment, 105 . pp. 332-342. ISSN 0360-1323

Mustapha, I. B. and Hasan, S. and Shamsuddin, S. M. and Lopes, N. and Leng, W. Y. (2016) GPU-based multiple back propagation for big data problems. International Journal of Advances in Soft Computing and its Applications, 8 (1). pp. 82-93. ISSN 2074-8523

Mustapha, Sa'ari and Saidi, Hamdani (1993) Study of filtration diluted crude palm oil slurry using labscale pressure filter. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-4.

N. Syazwani, N. Syazwani and Azhim, A. and Morimoto, Y. and Furukawa, K. S. and Ushida, T. (2015) Decellularization of aorta tissue using sonication treatment as potential scaffold for vascular tissue engineering. Journal of Medical And Biological Engineering, 35 (2). pp. 258-269. ISSN 1609-0985

Naderipour, Amirreza and Kamyab, Hesam (2022) Optimal design of hybrid grid-connected photovoltaic/wind/battery sustainable energy system improving reliability, cost and emission. Energy, 257 (NA). pp. 1-18. ISSN 0360-5442

Nadri, Muhammad Helmi and Wan Salleh, Wan Mohd. Nuzul Hakimi (2020) Molecular docking studies of phytochemicals from piper species as potential dual inhibitor of group X secreted phospholipase A2 (SPLA2-X) and Cyclooxygenase-2 (COX-2). Research Journal of Pharmacy and Technology, 13 (5). pp. 2181-2186. ISSN 0974-3618

Naeini, M. M. and Dass, S. B. and Ooi, C. Y. (2017) The design and implementation of a low-power gating scan element in 32/28 nm CMOS technology. Journal of Low Power Electronics and Applications, 7 (2). ISSN 2079-9268

Naeini, M. M. and Dass, S. B. and Ooi, C. Y. and Yoneda, T. and Inoue, M. (2017) An integrated DFT solution for power reduction in scan test applications by low power gating scan cell. Integration, the VLSI Journal, 57 . pp. 108-124. ISSN 0167-9260

Nafari, Afshin and Ghandvar, Hamidreza and Nekouee, Khanali and Nordin, Nur Azmah and Torkamani, Hadi (2021) Microstructural characterization, mechanical and tribological properties of ZC71 hybrid composite reinforced with SiC and MWCNT. Journal of Applied Research and Technology, 19 (4). pp. 345-363. ISSN 1665-6423

Nagappan, S. D. and Daud, S. M. (2021) Machine learning predictors for sustainable urban planning. International Journal of Advanced Computer Science and Applications, 12 (7). pp. 772-780. ISSN 2158-107X

Nair, Vikneswaran and Hamzah, Amran (2015) Successful community-based tourism approaches for rural destinations: the Asia Pacific experience. Worldwide Hospitality and Tourism Themes, 7 (5). pp. 429-439. ISSN 1755-4217

Naja Aqilah, Naja Aqilah and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Hagishima, Aya and Rijal, Hom Bahadur and Yakub, Fitri (2021) Analysis on electricity use and indoor thermal environment for typical air-conditioning residential buildings in Malaysia. Urban Climate, 37 . p. 100830. ISSN 2212-0955

Najafabadi, M. K. and Mohamed, A. H. and Mahrin, M. N. (2019) A survey on data mining techniques in recommender systems. Soft Computing, 23 (2). pp. 627-654. ISSN 1432-7643

Najafabadi, Maryam Khanian and Nikpay, Fatemeh and Nikfard, Pourya and Mahrin, Mohd Naz'ri and Babak, Darvish Rouhani (2015) Factors that affect the effectiveness of enterprise architecture implementation methodology. International Journal of Social, Management, Economics and Business Engineering, 9 (1). pp. 19-25. ISSN 1307-6892

Naje, A. S. and Chelliapan, S. and Zakaria, Z. and Abbas, S. A. (2016) Electrocoagulation using a rotated anode: a novel reactor design for textile wastewater treatment. Journal of Environmental Management, 176 . pp. 34-44. ISSN 0301-4797

Naje, A. S. and Chelliapan, S. and Zakaria, Z. and Ajeel, M. A. and Alaba, P. A. (2017) A review of electrocoagulation technology for the treatment of textile wastewater. Reviews in Chemical Engineering, 33 (3). pp. 263-292. ISSN 0167-8299

Naje, Ahmed Samir and Chelliapan, Shreeshivadasan and Zakaria, Zuriati and A. Ajeel, Mohammed and Sopian, Kamaruzzaman and Hasan, Husam Abdulrasool (2016) Electrocoagulation by solar energy feed for textile wastewater treatment including mechanism and hydrogen production using a novel reactor design with a rotating anode. RSC Advances, 6 (12). pp. 10192-10204. ISSN 2046-2069

Nandiyantoa, Asep Bayu Dani and Maulanaa, Muhammad Irfansyah and Raharjob, Jarot and Sunaryaa, Yayan and Minghat, Asnul Dahar (2020) Techno-economic analysis for the production of LaNi5 particles. Communications in Science and Technology, 5 (2). pp. 70-84. ISSN 2502-9258

Narayana Samy, Ganthan and Perumal, Sundresan and Awang, Norkhushaini and Hassan, Noor Hafizah and Maarop, Nurazean (2022) Implementation of SARIMA algorithm in understanding cybersecurity threats in university network. Journal of Positive School Psychology, 6 (3). pp. 8442-8451. ISSN ISSN 2717-7564

Nasef, Mohamed Mahmoud and Hegazy, El-Sayed Ahmed (2004) Preparation and applications of ion exchange membranes by radiation-induced graft copolymerization of polar monomers onto non-polar films. Progress in Polymer Chemistry, 29 . pp. 499-561. ISSN 0079-6700

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohamed Senna, Magdy (2005) Hydrolysis of sucrose by radiation grafted sulfonic acid membranes. Chemical Engineering Journal, 108 . pp. 13-17. ISSN 1385-8947

Nasef, M. M. and Gupta, B. and Shameli, K. and Verma, C. and Ali, R. R. and Teo, M. T. (2021) Engineered bioactive polymeric surfaces by radiation induced graft copolymerization: strategies and applications. Polymers, 13 (18). ISSN 2073-4360

Nasef, M. M. and Sithambaranathan, P. and Ahmad, A. and Abouzari lotf, E. (2017) Intensifying radiation induced grafting of 4-vinylpyridine/glycidyl methacrylate mixtures onto poly(ethylene-co-tetrafluoroethylene) films using ultrasound. Radiation Physics and Chemistry, 134 . pp. 56-61. ISSN 0969-806X

Nasef, Mohamed Mahmoud (2022) Radiation grafted ion conducting membranes for electrochemical energy systems: Status of developmental and upscaled membranes. Journal of Applied Membrane Science & Technology, 26 (1). pp. 51-76. ISSN 2600-9226

Nasef, Mohamed Mahmoud and Saidi, Hamdani (2006) Structural, thermal and ion transport properties of radiation grafted lithium conductive polymer electrolytes. Materials Chemistry And Physics, 99 (2-3). pp. 361-369. ISSN 0254-0584

Nasir, N. R. and Minghat, A. D. (2020) Factors limiting policy recognition of the new innovation approaches. International Journal of Advanced Science and Technology, 29 (7). pp. 519-530. ISSN 2005-4238

Nasri, Noor Shawal (1989) Pengenalan asas teknologi pemprosesan gas. Buletin FKKKSA, 3 (2). pp. 30-38. ISSN 0128-0740

Nasri, Noor Shawal and Mohsin, Rahmat (1992) Liquefied natural gas: renewed interest and problems. Buletin FKKKSA, 6 (2). pp. 25-33. ISSN 0128-0740

Nasri, Noor Shawal and Zakaria, Zainal (1991) Gas utilisation opportunities in the existing market and the new approach in developing of combined heat and power (CHP); the significant unique features of natural gas. Buletin FKKKSA, 5 (2). pp. 29-39. ISSN 0128-0740

Nasrollahi, Saeed and Maleki, Shervin and Shariati, Mahdi and Marto, Aminaton and Khorami, Majid (2018) Investigation of pipe shear connectors using push out test. Steel and Composite Structures, 27 (5). pp. 537-543. ISSN 1229-9367

Naswir, Rini Yudesia and Maarop, Nurazean and Hasan, Mahmudul and Daud, Salwani and Samy, Ganthan Narayana and Magalingam, Pritheega (2019) Towards a conceptual model to evaluate usability of digital government services in Malaysia. International Journal of Advanced Computer Science and Applications, 10 (4). pp. 313-322. ISSN 2158-107X

Nazir, S. and Fatima, N. and Chuprat, S. (2020) Situational factors for modern code review to support software engineers' sustainability. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 498-504. ISSN 2158-107X

Nazir, Sumaira and Nargis Fatima, Nargis Fatima and Chuprat, Suriayati (2020) Situational modern code review framework to support individual sustainability of software engineers. International Journal of Advanced Computer Science and Applications, 11 (6). pp. 366-375. ISSN 2158-107X

Nazmi, N. and Rahman, M. A. A. and Yamamoto, S. I. and Ahmad, S. A. and Malarvili, M. B. and Mazlan, S. A. and Zamzuri, H. (2017) Assessment on stationarity of EMG signals with different windows size during isotonic contractions. Applied Sciences (Switzerland), 7 (10). ISSN 2076-3417

Nazmi, Nurhazimah and Abdul Rahman, Mohd. Azizi and Mazlan, Saiful Amri and Adiputra, Dimas and Bahiuddin, Irfan and Shabdin, Muhammad Kashfi and Abdul Razak, Nurul Afifah and Mohammed Ariff, Mohd. Hatta (2020) Analysis of EMG signals during stance and swing phases for controlling Magnetorheological Brake applications. Open Engineering, 11 (1). pp. 112-119. ISSN 2391-5439

Ng, C. R. and Than, J. C. M. and Rijal, O. M. and Kassim, R. M. and Yunus, A. and Noor, N. M. (2019) Construction of 3d lung image morphology using 3d distance regularized level set. ARPN Journal of Engineering and Applied Sciences, 14 (1). pp. 109-113. ISSN 1819-6608

Ng, Chiew Teng and Mohd. Tobi, Siti Uzairiah and Fathi, Mohamad Syazli (2018) Current BIM practices in Malaysian construction organisations: The stakeholders' perspective. Malaysian Construction Research Journal, 3 (SI1). pp. 97-113. ISSN 1985-3807

Ng, Kuan-Seong and Ujang, Zaini and Le-Clech, Pierre (2004) Arsenic removal technologies for drinking water treatment. Reviews in Environmental Science and Bio/Technology, 3 (1). pp. 43-53. ISSN 1569-1705

Ng, Sock Yen and Abdul Shakur, Elia Syarafina and Choong, Weng Wai (2010) Energy conservation opportunities in Malaysian universities. Malaysian Journal of Real Estate, 5 (1). 26- 35. ISSN 1823-8505

Ng, Wai Tuck and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Hagishima, Aya and Rijal, Hom Bahadur and Yakub, Fitri (2020) Affordable retrofitting methods to achieve thermal comfort for a terrace house in Malaysia with a hot–humid climate. Energy and Buildings, 223 . p. 110072. ISSN 0378-7788

Ngadi, Norzita and Saidina Amin, Nor Aishah and Prasetyoko, Didik (2005) Role of Cu-Mfi zeolite catalyst on direct conversion of methane ethane to gasoline. Jurnal Kejuruteraan, 17 . pp. 59-69. ISSN 0128-0198

Ngah Deman, Enda Nurwani and Minghat, Asnul Dahar (2018) Knowledge about safety practices in workshop among student in industrial training institute. Journal of Advanced Research in Occupational Safety and Health, 2 (1). pp. 7-12. ISSN 2637-0255

Ngoi, Hui Ying and Lai, Li Sze and Tay, Wee Horng and Kiew, Peck Loo (2022) Computational fluid dynamics simulation for dual-phase membrane module for CO2 capture: Effect of membrane thickness, temperature and CO2 feed concentration. Environmental Progress and Sustainable Energy, 41 (3). NA-NA. ISSN 1944-7442

Nhon, V. Do and Hien, D. Nguyen and Selamat, Ali (2018) Knowledge-based model of expert systems using Rela-model. International Journal of Software Engineering and Knowledge Engineering, 28 (8). pp. 1047-1090. ISSN 0218-1940

Nifa, F. A. A. and Wan Mohd. Rani, W. N. M. and Ismail, M. N. and Rahim, S. A. (2016) Towards developing a sustainable campus: best practice approach. International Journal of Supply Chain Management, 5 (4). pp. 131-138. ISSN 2051-3771

Nik Mahmod, Nik Azmi and Mohd Illias, Rosli and Syed Muhammad, Syed Annuar Fauad and H. D., Habib Abdullah Fikri and S., Wan Nor Azlinda and Lau, S. Y. (2003) Cloning and expression of 3-hydroxybutyrate dehydrogenase gene from locally isolated Pseudomonas sp. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 262-265.

Nik Mahmood, Nik Hasnaa and Md. Yussof, Mohd. Helmi and Tan, Hup Soon and Tin, Pei Ling (2014) The relationship between career development practices and high performance talent in private organizations in Malaysia. Sains Humanika, 2 (2). pp. 59-64. ISSN 2289-6996

Nik Mahmood, Nik Hasnaa and Ragavan, Santhi and Atan, Jamsari (2015) Impact of training on employees' job performance: a case study of Malaysian small medium enterprise. Review Of Management, 5 (1/2). pp. 40-50. ISSN 2231-0487

Nik Zainal Abidin, Nik Mohd Firdaus and Mohd. Yusof, Farahwahida and Hehsan, Nurshuhadak (2014) Aplikasi Iphone: antara teknologi maklumat dan komunikasi, media sosial dan sebaran dakwah. Sains Humanika, 2 (1). pp. 41-53. ISSN 2289-6996

Nilashi, Mehrbakhsh and Ibrahim, Othman and Mirabi, Vahid Reza and Ebrahi, Leili and Zare, Mojtaba (2015) The role of Security, Design and Content factors on customer trust in mobile commerce. Journal of Retailing and Consumer Services, 26 . pp. 57-69. ISSN 9673-911

Noborio, Kosuke and Ito, Yuki and He, Hailong and Li, Min and Kojima, Yuki and Hara, Hirofumi and Mizoguchi, Masaru (2018) A new and simple method for measuring in situ field-saturated hydraulic conductivity using a falling-head single cylinder. Paddy and Water Environment, 16 (1). pp. 81-87. ISSN 1611-2490

Noge, Hirofumi and Ueno, Yoshie and Abdul Kadir, Hasannuddin and Yahya, Wira Jazair (2021) Utilization of palm acid oil for a diffusion combustion burner as fuel and nitrogen oxides reduction by the thermally decomposed hydrocarbons. Energy, 224 . p. 120173. ISSN 0360-5442

Noor, I. M. M. and Muhamad Kamal, M. A. (2017) Control of wastewater treatment by using the integration MATLAB and labVIEW. Pertanika Journal of Science and Technology, 25 (S). pp. 77-84. ISSN 0128-7680

Noor, M. J. M. M. and Mohammad, T. A. and Ghazali, A. H. (2016) Assessment of using hollow fibre microfiltration in treating lake water. Desalination and Water Treatment, 57 (48-49). pp. 23232-23245.

Noor, N. M. and Mahdzir, A. M. and Nor, A. M. and Abdullah, R. (2019) Marital wellbeing indicators amongst malay muslim couple in Malaysia: a preliminary study. Malaysian Journal of Medicine and Health Sciences, 15 . pp. 114-119. ISSN 1675-8544

Noor, N. M. and Othman, R. and Mubarak, N. M. and Abdullah, E. C. (2017) Agricultural biomass-derived magnetic adsorbents: preparation and application for heavy metals removal. Journal of the Taiwan Institute of Chemical Engineers, 78 . pp. 168-177. ISSN 1876-1070

Noor, N. Q. M. and Sjarif, N. N. A. and Azmi, N. H. F. M. and Daud, S. M. and Kamardin, K. (2017) Hardware trojan identification using machine learning-based classification. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-4 Sp). pp. 23-27. ISSN 2180-1843

Noor Hisan, Fara Nuur Ain and Saifuzzaman, Ahmad Damdarash and Mohd. Yasak, Hannan Asyraf and Lee, Chen Kai and Bani, Nurul Aini and Mohd. Noor, Norliza and Mohd. Aris, Siti Armiza and Abd. Jalil, Siti Zura and Syed Abdul Rahaman, Sharipah Alwiah and Usman, Sahnius and Abdullah, Haslaile and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil and Ishak, Ruzana and Muhammad-Sukki, Firdaus and Abu-Bakar, Siti Hawa (2017) Relationship between demographic characteristics and hand grip measurement of students in UTMKL. Journal of Advanced Research in Applied Mechanics, 29 (1). pp. 9-19. ISSN 2289-7895

Megat Mohd. Noor, Megat Johari and Mohamed, Ezzuldin Hasan and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim (2015) Effectiveness of salt-extracted freeze-dried Moringa oleifera as a coagulant. Desalition And Water Treatment, 55 (13). pp. 3621-3627. ISSN 1944-3994

Noordin, Mohd. Suffian and Mat, Ramli (1994) Xylene isomerization over zeolite catalysts. Buletin FKKKSA, 8 (2). pp. 30-33. ISSN 0128-0740

Nor Muhammad, Nor Aziah Amirah and Yusof, Rubiyah and Arfa, Reza and Yunus, Ridzuan and Ismail, Nordinah (2019) Esophagus detection for halal classification in SYCUT. International Journal of Integrated Engineering, 11 (4). pp. 139-148. ISSN 2229-838X

Norbib, Normah and Abd. Rahman, Badarulhisam and Kamal, Mohd Nazlee and Mat, Hanapi and Sarmidi, Mohamad Roji and Abd. Latif, Fazilah and Razali, Firdausi (1993) Penghasilan enzim oleh kulat aspergillus niger menggunakan fermenter skala 5 liter. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-7.

Norbib, Normah and Abdul Rahman, Badarulhisam and Abdul Latif, Fazilah and Kamal, Mohd Nazlee and Sarmidi, Mohamad Roji and Mat, Hanapi (1992) Beberapa parameter penghasilan enzim oleh kulat aspergillus niger menggunakan substrat tepung ubi kayu: pengkulturan dalam kelalang goncangan. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Nordin, Mohd. Safarin and Saud, Muhammad Sukri and A. Sorby, Sheryl (2022) The impact of 3-dimensional solid modeling on improving the visualization skills of engineering drawing students. Jurnal Persatuan Pendidikan Teknik Dan Vokasional Malaysia, 11 . pp. 112-122. ISSN 1985-6652

Norfazrina, H. M. Y. and Muhamad, P. and Aminudin, B. A. and Wahab, A. M. and Raihan, M. R. (2015) Application of conditioned reverse path method to large multi-degree-of-freedom nonlinear structure. ARPN Journal of Engineering And Applied Sciences, 10 (15). pp. 6571-6577. ISSN 1819-6608

Norhasnan, Nurul Haziatul Ain and Hassan, Mohamad Zaki and Mohd. Nor, Ariff Farhan and Zaki, S. A. and Dolah, Rozzeta and Jamaludin, Khairur Rijal and Abdul Aziz, Sa’ardin (2021) Physicomechanical properties of rice husk/coco peat reinforced acrylonitrile butadiene styrene blend composites. Polymers, 13 (7). p. 1171. ISSN 2073-4360

Noroozi, Erfaneh and Mohd. Daud, Salwani and Sabouhi, Ali (2013) Secure digital signature schemes based on hash functions. International Journal of Innovative Technology and Exploring Engineering, 2 (4). pp. 321-325. ISSN 2278 - 3075

Norzaida, A. and Siti Musliha, M. R. and Zalina, M. D. and Syafrina, A. H. (2017) Probability distributions comparative analysis in assessing rainfall process in time and space. International Journal of Civil Engineering and Technology, 8 (10). pp. 1679-1688. ISSN 0976-6308

Norzaida, A. and Zalina, M. D. and Fadhilah, Y. (2016) Application of Fourier series in managing the seasonality of convective and monsoon rainfall. Hydrological Sciences Journal-Journal Des Sciences Hydrologiques, 61 (10). pp. 1967-1980.

Norzarini, A. and Kitajima, T. and Feng, Z. and Sha'ban, M. and Azhim, A. (2017) Characterization based on biomechanical properties for meniscus scaffolds by sonication decellularization treatment. Journal of Biomaterials and Tissue Engineering, 7 (3). pp. 223-232. ISSN 2157-9083

Nugroho, K. C. and Ubaidillah, U. and Arilasita, R. and Margono, M. and Priyambodo, B. H. and Purnama, B. and Mazlan, S. A. and Choi, S. B. (2021) The effect of sr-cofe2o4 nanoparticles with different particles sized as additives in cip-based magnetorheological fluid. Materials, 14 (13). ISSN 1996-1944

Nugroho, Kacuk Cikal and Ubaidillah, Ubaidillah and Purnama, Budi and Mas'udi, Ahmad and Nordin, Nur Azmah and Mazlan, Saiful Amri and Choi, Seung Bok (2020) The effect of MnxCo(1-x)Fe2O4 with x = 0, 0.25 and 0.5 as nanoparticles additives in magnethorheological fluid. Smart Materials and Structures, 29 (11). ISSN 0964-1726

Abd. Aziz, Nur Suhaili and Nakajima, Yoshikata and Sato, Haruyoshi and Maekawa, Toru and Hashim, Abdul Manaf (2018) One-pot green synthesis of Ag nanoparticle-decorated reduced graphene oxide composites: effect of Ag/graphene oxide volume ratio and its demonstration as low-voltage on-chip photodetector. Journal of Materials Science, 53 (16). pp. 11620-11632. ISSN 0022-2461

Nurhanna, A. A. and Othman, M. F. (2017) Multi-class support vector machine application in the field of agriculture and poultry: a review. Malaysian Journal of Mathematical Sciences, 11 (S). pp. 35-52. ISSN 1823-8343

Nurihan, O. and Aminanda, b,, Y. and Ali, J. S. M. and Rasid, Z. A. and Hafizal, Y. (2019) The impact behaviour of carbon fiber-epoxy composite leading edge using finite element method. International Journal of Recent Technology and Engineering, 8 (2). pp. 2617-2622. ISSN 2277-3878

Nurihan, O. and Hisham, M. R. M. and Rasid, Z. A. and Hassan, M. Z. and Nor, A. F. M. (2019) The elastic properties of unidirectional bamboo fibre reinforced epoxy composites. International Journal of Recent Technology and Engineering, 8 (3). pp. 7187-7193. ISSN 2277-3878

Nurul Hanir, M. L. and Hasfalina, C. M. and Sani, A. and Rashid, M. (2017) Pre-treatment ammonia removal of scheduled waste leachate with hydrated lime and caustic soda. Jurnal Teknologi, 79 (1). pp. 107-118. ISSN 0127-9696

Nyein, O. and Abu, A. B. and Moe, A. L. (2015) Numerical analysis of vehicle exhaust system to determine hanger location using root mean square value. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6209-6213. ISSN 1819-6608

Oehlers, Deric John and Muhamad, Rahimah and Mohamed Ali, M. S. (2012) Serviceability flexural ductility of FRP RC beams: a discrete rotation approach. Construction and Building Materials, 49 . pp. 974-984. ISSN 0950-0618

Oh, X. B. and Rozali, N. E. M. and Liew, P. Y. and Klemes, J. J. (2021) Design of integrated energy-water systems using pinch analysis: a nexus study of energy-water-carbon emissions. Journal of Cleaner Production, 322 . ISSN 0959-6526

Okino Otuoze, Abdulrahaman and Mustafa, Mohd Wazir and Ibrahim, Oladimeji and Salisu, Sani and Mohammed, Olatunji Obalowu and Ayopo Oloyede, Abdulkarim and Salisu Gaya, Zubairu (2019) Threats and challenges of smart grids deployments - a developing nations perspective. Journal of Electrical Engineering, 18 (2). pp. 33-43. ISSN 0128-4428

Omairi, A. and Ismail, Z. H. and Danapalasingam, K. A. and Ibrahim, M. (2017) Power harvesting in wireless sensor networks and its adaptation with maximum power point tracking: current technology and future directions. IEEE Internet of Things Journal, 4 (6). pp. 2104-2115. ISSN 2327-4662

Omairi, Amzar and Ismail, Zool Hilmi (2021) Towards machine learning for error compensation in additive manufacturing. Applied Sciences (Switzerland), 11 (5). pp. 1-27. ISSN 2076-3417

Omar, C. N. and Kamarudin, K. H. (2019) Factors contributing to flood resilience among rural community: case study of the east coast of Malaysia. Disaster Advances, 12 (9). pp. 41-49. ISSN 0974-262X

Omar, Farazawani and Ahmad, Adnan and Omar, Farhana and Dahar, Asnul (2022) Developing of practical teaching framework in identifying of teacher competence. International Journal of Academic Research in Progressive Education and Development, 11 (3). pp. 157-166. ISSN 2226 -6348

Omar, Mohd. Izdihar and Nik Mahmood, Nik Hasnaa (2020) Mediating the effect of organizational culture on the relationship between training and development and organizational performance. Management Science Letters, 10 (16). pp. 3793-3800. ISSN 1923-9335

Omar, Nurizan and Abdullah, Ezzat Chan and Numan, Arshid and Mubarak, Nabisab Mujawar and Khalid, Mohammad and Aid, Siti Rahmah and Agudosi, Elochukwu Stephen (2022) Facile synthesis of a binary composite from watermelon rind using response surface methodology for supercapacitor electrode material. Journal of Energy Storage, 49 (104147). pp. 1-15. ISSN 2352-152X

Omar Chong, N. and Abd. Wahid, S. N. and Wan Mohd. Rani, W. N. M. and Razak, K. A. and Kamarudin, K. H. (2019) From surviving to thriving? Evaluating the resilience of rural tourism businesses in disaster-prone area of Sabah, Malaysia. Disaster Advances, 12 (7). pp. 41-48. ISSN 2278-4543

Omar Chong, Noraini and Kamarudin, Khairul Hisyam (2018) Disaster risk management in Malaysia: Issues and challenges from the persepctive of agencies. Planning Malaysia, 16 (1). pp. 105-117. ISSN 1675-6215

Omi, R. T. and Yahya, W. J. and Abd. Kadir, H. and Chan, A. F. E. and Ithnin, A. M. and Abdullah, N. R. and Rahman, M. M. and Tahir, I. (2021) Performance and emissions of diesel engine with circulation non- surfactant emulsion fuel system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (2). ISSN 2289-7879

Omi, Reashed Tasvir and Yahya, Wira Jazair and Abd. Kadir, Hasannuddin and Chan, Arif Fahim Ezzat and Ithnin, Ahmad Muhsin and Abdullah, Nik Rosli and Rahman, Md. Mujibur and Tahir, Usama (2021) Performance and emissions of diesel engine with circulation nonsurfactant emulsion fuel system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (2). pp. 96-105. ISSN 2289-7879

Omran Abokhdair, Nuha and Abd. Manaf, Azizah and Alfagi, Abdalrahman S. and Mohamed Sultan, Mohamed Sultan and Mousavi, Seyed Mojtaba and Abd. Manaf, Zuraidah and Mohamad, Fatma Susilawati (2018) Patient Data Hiding and Integrity Control Using Prediction-Based Watermarking for Brain MRI and CT Scan Images. Journal of Medical Imaging and Health Informatics, 8 (4). pp. 691-702. ISSN 2156-7018

Ong, Y. S. and Sulaiman, A. H. and Abdullah, F. and Lau, K. Y. and Md. Yusoff, N. (2020) Performance investigation of dual wavelength fiber laser using different SOAs. International Journal of Integrated Engineering, 12 (6). pp. 273-281. ISSN 2229-838X

Onuoha, M. D. U. and Ismail, I. and Ismail, A. S. and Mansor, M. F. (2016) Experimental determination of flow patterns and water holdup of low viscosity oil-water system in horizontal pipes. Sains Malaysiana, 45 (11). 1635 1640. ISSN 0126-6039

Ooi, Chia Yee and Fujiwara, Hideo (2011) A new design-for-testability method based on thru-testability. Journal of Electronic Testing: Theory and Applications (JETTA), 27 (5). pp. 583-598. ISSN 1573-0727

Ooi, Zhe Lun and Tan, Pui Yee and Tan, Lian See and Yeap, Swee Pin (2020) Amine-based solvent for CO2 absorption and its impact on carbon steel corrosion: A perspective review. Chinese Journal of Chemical Engineering, 28 (5). pp. 1357-1367. ISSN 1004-9541

Oryani, Bahareh and Kamyab, Hesam (2022) Does structural change boost the energy demand in a fossil fuel-driven economy? New evidence from Iran. Energy, 254 (NA). pp. 1-12. ISSN 0360-5442

Osman, Nurul Aini and Othman, Norazli and Mohammad, Roslina and Chelliapan, Shreeshivadasan and Osman, Nurul Aini (2018) Life cycle assessment study for managing electronic waste using landfill technology. International Journal of Civil Engineering and Technology, 9 (7). pp. 542-549. ISSN 0976-6308

Osman, Shahrul Azmir and Che Sidik, Nor Azwadi (2009) UTOPIA finite different lattice boltzmann method for simulation natural convection heat transfer from a heated concentric annulus cylinder. European Journal of Scientific Research, 38 (1). pp. 63-71. ISSN 1450-216X

Ostovan, Farhad and Hasanzadeh, Ehsan and Toozandehjani, Meysam and Shafiei, Ehsan and Jamaluddin, Khairur Rijal and Amrin, Astuty (2020) Microstructure, hardness and corrosion behavior of gas tungsten arc welding clad Inconel 625 super alloy over A517 carbon steel using ERNiCrMo3 filler metal. Journal of Materials Engineering and Performance, 29 (10). pp. 6919-6930. ISSN 1059-9495

Othman, M. F. and Mahfouf, M. and Linkens, D. A. (2001) Designing power system stabilizer for multimachine power system using neuro-fuzzy algorithm. Jurnal Teknologi D, 35 (D). pp. 55-64. ISSN 0127-9696

Othman, Norhayani and Hassan, Azman and Rahmat, Abdul Razak and Wahit, Mat Uzir (2007) Preparation and characterisation of polyethylene-octene grafted maleic anhydride-toughened 70:30 PA6/PP/MMT nanocomposites. Polymers & Polymer Composites, 15 (3). pp. 217-228. ISSN 0967-3911

Othman, B. A. and Marto, A. and Yunus, N. Z. M. and Soon, T. C. and Pakir, F. (2019) The grading effect of coarse sand on consolidated undrained strength behaviour of sand matrix soils. International Journal of Recent Technology and Engineering, 7 (5). ISSN 2277-3878

Othman, Bakhtiar Affandy and Marto, Aminaton (2019) A liquefaction resistance of sand-fine mixtures: Short review with current research on factors influencing liquefaction resistance. International Journal of Integrated Engineering, 11 (7). pp. 20-30. ISSN 2229-838X

Othman, Mohd. Fauzi and Omar, Ahmad Sahar and Zainal Abidin, Mohd. Nasir and Dierikx, Erik F. (2015) Color mark sensor calibration system for timing devices with a seven-segment LCD. NCSL International Measure: The Journal Of Measurement Science, 10 (2). pp. 76-83. ISSN 1931-5775

Othman, N. and Chelliapan, S. and Mohammad, R. and Osman, N. A. (2020) A life cycle assessment study for integrated management of electronic waste. Journal of Environmental Treatment Techniques, 8 (2). pp. 669-673. ISSN 2309-1185

Othman, N. and Lerk, L. L. and Chelliapan, S. and Mohammad, R. and Ariff, N. M. and Nasri, N. S. (2017) Risk assessment and control measures for the printing ink production process. International Journal of Civil Engineering and Technology, 8 (10). pp. 41-55. ISSN 0976-6308

Othman, N. and Lerk, L. L. and Chelliapan, S. and Mohammad, R. and Nasri, N. S. (2017) Safety and health issues during printing ink production process. International Journal of Civil Engineering and Technology, 8 (9). pp. 942-954. ISSN 0976-6308

Othman, N. and Osman, N. A. and Chelliapan, S. and Mohammad, R. (2017) Life cycle assessment: a Comparison study on the various electronic waste management option. International Journal of Civil Engineering and Technology, 8 (8). pp. 1177-1185. ISSN 0976-6308

Othman, N. E. and Zaki, S. A. and Ahmad, N. H. and Razak, A. A. (2019) Outdoor thermal comfort study of an urban university campus in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 288-296. ISSN 2289-7879

Othman, Nooraini (2014) A comparative study between Western and Islamic perspectives on human development and life-friendly environment. Online Journal of Research in Islamic Studies, 1 (1). pp. 6-29. ISSN 2289-6821

Othman, Nurnida Elmira and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Rijal, Hom Bahadur and Ahmad, Nurul Huda and Abd. Razak, Azli (2021) Field study of pedestrians’ comfort temperatures under outdoor and semi-outdoor conditions in Malaysian university campuses. International Journal of Biometeorology, 65 (4). pp. 453-477. ISSN 0020-7128

Othman, S. A. and Mahmood, N. H. N. (2019) Linking employee engagement towards individual work performance through human resource management practice: from high potential employees perspectives. Management Science Letters, 9 (7). pp. 1083-1092. ISSN 1923-9335

Othman, Siti Amirah and Nik Mahmood, Nik Hasnaa (2022) Linking level of engagement, HR practices and employee performance among high-potential employees in Malaysian manufacturing sector. Global Business Review, 23 (3). pp. 641-661. ISSN 0972-1509

Othman, Ariff (1994) Kajian terhadap kesan percampuran kelikir dengan pasir formasi ke atas produktiviti telaga. Buletin FKKKSA, 8(1) . pp. 67-81. ISSN 0128-0740

Owolewa, Rasheed O. and Magalingam, Pritheega (2019) Faster identification and resolution of risk in mobile and internet banking using CLOUDSHIFT. Open International Journal of Informatic s, 7 . pp. 1-11. ISSN 2289-2370

Ozturk, M. and Durdyev, S. and Nuri Aras, O. and Ismail, S. and Banaitiene, N. (2020) How effective are labor wages on labor productivity?: an empirical investigation on the construction industry of New Zealand. Technological and Economic Development of Economy, 26 (1). pp. 258-270. ISSN 2029-4913

Padfield, Rory William and Papargyropoulou, Effie and Preece, Chris (2012) A preliminary assessment of greenhouse gas emission trends in the production and consumption of food in Malaysia. International Journal of Technology, 3 (1). pp. 56-66. ISSN 2086-9614

Pal, Indrajit and Doydee, Puvadol and Utarasakul, Tatsanawalai and Jaikaew, Piyanuch and Razak, Khamarrul Azahari and Fernandez, Glenn and Huang, Tailin and Chen, Chian Siau (2021) System approach for flood vulnerability and community resilience assessment at the local level – a case study of Sakon Nakhon Province, Thailand. Kasetsart Journal of Social Sciences, 42 (1). pp. 107-116. ISSN 2452-3151

Panahi, B. and Moezzi, E. and Preece, C. N. and Wan Zakaria, W. N. (2017) Value conflicts and organizational commitment of internal construction stakeholders. Engineering, Construction and Architectural Management, 24 (4). pp. 554-574. ISSN 0969-9988

Panahi, Babak and Moezzi, Elena and Preece, Christopher Nigel and Wan Zakaria, Wan Normeza (2016) Personal-organisational value conflicts and job satisfaction of internal construction stakeholders. Construction Economics And Building, 16 (1). pp. 1-17. ISSN 2204-9029

Panatik, Kamarul Zaman and Kamardin, Kamilia and Amir Sjarif, Nilam Nur and Abd. Aziz, Nur Syazarin Natasha and Bani, Nurul Aini and Ahmad, Noor Azurati and Mohd. Sam, Suriani and Azizan, Azizul (2019) Detection of arrhythmia from the analysis of ECG signal using artificial neural networks. International Journal Of Advanced And Applied Sciences (Ijaas), 6 (4). pp. 101-109. ISSN 2313-626X

Panatik, Kamarul Zaman and Kamardin, Kamilia and Maidin, Siti Nurhafizza and Ngu, War Hlaing and Ahmed, Irfanuddin Shafi and Taj, Noureen and Mad Kaidi, Hazilah (2020) Security features in fingerprint biometric system. International Journal of Integrated Engineering, 12 (6). pp. 27-39. ISSN 2229838X

Panatik @ Abd. Rahman, Siti Aisyah (2003) Teknologi multimedia di Malaysia : implikasinya terhadap identiti muslim. Jurnak Kemanusiaan, 17 (2). pp. 1-10. ISSN 1675-1930

Pandey, M. and Choudhury, H. and Abd. Aziz, A. and Bhattamisra, S. K. and Gorain, B. and Su, J. S. T. and Tan, C. L. and Chin, W. Y. and Yip, Y. K. (2021) Potential of stimuli-responsive in situ gel system for sustained ocular drug delivery: recent progress and contemporary research. Polymers, 13 (8). ISSN 2073-4360

Pang, J. and Theodorou, I. G. and Centeno, A. and Petrov, P. K. and Alford, N. M. and Ryan, M. P. and Xie, F. (2017) Gold nanodisc arrays as near infrared metal-enhanced fluorescence platforms with tuneable enhancement factors. Journal of Materials Chemistry C, 5 (4). pp. 917-925. ISSN 2050-7534

Papargyropoulou, Effie and Colenbrander, Sarah and Sudmant, Andrew Heshedahl Eshedahl and Gouldson, Andy and Lee, Chewtin (2015) The economic case for low carbon waste management in rapidly growing cities in the developing world: the case of Palembang, Indonesia. Journal of Environmental Management, 163 . pp. 11-19. ISSN 0301-4797

Paramasivam, K. and Rajoo, S. and Romagnoli, A. and Yahya, W. J. (2017) Tonal noise prediction in a small high speed centrifugal fan and experimental validation. Applied Acoustics, 125 . pp. 59-70. ISSN 0003-682X

Parsazadeh, Nadia and Ali, Rosmah and Rezaei, Mehran (2018) A framework for cooperative and interactive mobile learning to improve online information evaluation skills. Computers and Education, 120 . pp. 75-89. ISSN 0360-1315

Parvez, A. and Noor, M. J. M. M. and Motoo, U. and Goto, M. and Muzahidul Islam, A. K. M. and Akter, A. (2017) Recovery of nitrogen & phosphorus from microalgae by subcritical water. Chemical Engineering Transactions, 56 . pp. 271-276. ISSN 2283-9216

Pashna, Mohsen and Yusof, Rubiyah and Ismail, Zool H. and Namerikawa, Toru and Yazdani, Sepideh (2020) Autonomous multi-robot tracking system for oil spills on sea surface based on hybrid fuzzy distribution and potential field approach. Ocean Engineering, 207 . p. 107238. ISSN 0029-8018 (In Press)

Pazheri, F. R. and Othman, M. F. and Ottukuloth, S. (2019) Power station scheduling with energy storage. Journal of The Institution of Engineers (India): Series B, 100 (1). pp. 77-83.

Peng, W. L. and Mohd. Nasir, H. and Setapar, S. H. M. and Ahmad, A. and Lokhat, D. (2020) Optimization of process variables using response surface methodology for tocopherol extraction from roselle seed oil by supercritical carbon dioxide. Industrial Crops and Products, 143 . ISSN 0926-6690

Pertheban, Sivakumar and Samy, Ganthan Narayana and Shanmugam, Bharanidharan (2020) A systematic literature review: information accuracy practices in tourism. Journal of Quality Assurance in Hospitality and Tourism, 21 (1). pp. 1-30. ISSN 1528-008X

Perumal, S. and Navarathnam, S. and De Vosse, C. and Samsuddin, S. B. and Samy, G. N. (2017) Comparative studies on mobile forensic evidence extraction open source software for android phone. Advanced Science Letters, 23 (5). pp. 4483-4486. ISSN 1936-6612

Perumal, Sundresan and Raman, Valliappan and Samy, Ganthan Narayana and Shanmugam, Bharanidharan and Kisenasamy, Karthiggaibalan and Ponnan, Suresh (2022) Comprehensive literature review on delay tolerant network (DTN) framework for improving the efficiency of internet connection in rural regions of Malaysia. International Journal of Systems Assurance Engineering and Management, 13 (1). pp. 764-777. ISSN 0975-6809

Perumal, Sundresan and Raman, Valliappan and Samy, Ganthan Narayana and Shanmugam, Bharanidharan and Kisenasamy, Karthiggaibalan and Ponnan, Suresh (2022) Enhanced disruption tolerant network (DTN) framework for improving network efficiency in rural areas. International Journal of System Assurance Engineering and Management, 13 (1). pp. 710-717. ISSN 0975-6809

Petra Maresova, Petra Maresova and Ehsan Javanmardi, Ehsan Javanmardi and Raihan Maskuriy, Raihan Maskuriy and Selamat, Ali and Kuca, Kamil (2022) Dynamic sustainable business modelling: exploring the dynamics of business model components considering the product development framework. Applied Economics, 54 (51). pp. 5904-5931. ISSN 0003-6846

Phia, P. A. and Abbas, H. and Kamaruddin, N. (2020) Physical security problems in local governments: a survey. Journal of Environmental Treatment Techniques . pp. 679-686. ISSN 2309-1185

Pho, Khoa and Mohammed Amin, Muhamad Kamal and Yoshitaka, Atsuo (2019) Segmentation-driven hierarchical retinanet for detecting protozoa in micrograph. International Journal of Semantic Computing, 13 (3). pp. 393-413. ISSN 1793-7108

Phuang, Zhen Xin and Woon, Kok Sin and Wong, Khai Jian and Liew, Peng Yen and Mohd. Hanafiah, Marlia (2021) Unlocking the environmental hotspots of palm biodiesel upstream production in Malaysia via life cycle assessment. Energy, 232 . p. 121206. ISSN 0360-5442

Pohan, A. H. and Razak, L. A. L. and Dziyauddin, R. A. (2019) Application of simulation of queue relationships that occur and the timing of traffic lights on road crossings using fuzzy logic method. International Journal of Innovation, Creativity and Chang, 8 (7). pp. 116-134. ISSN 2201-1315

Pour, A. B. and Hashim, M. (2017) Application of Landsat-8 and ALOS-2 data for structural and landslide hazard mapping in Kelantan, Malaysia. Natural Hazards and Earth System Sciences, 17 (7). pp. 1285-1303. ISSN 1561-8633

Pourmazaherian, Mehdi and Baqutayan, Shadiya Mohammed Saleh (2019) Determination of factors affecting safety performance in Iran construction industries. Singapore Journal of Scientific Research, 9 (3). pp. 105-112. ISSN 2010-006x

Prasetya, Laksmana Widi and Prabowo, Aditya Rio and Ubaidillah, Ubaidillah and Istanto, Iwan and Nordin, Nur Azmah (2021) Design of crashworthy attenuator structures as a part of vehicle safety against impact: Application of waste aluminum can-based material. Theoretical and Applied Mechanics Letters, 11 (2). pp. 1-9. ISSN 2095-0349

Prima Sakti, Muhammad Rizky and Masih, Mansur and Saiti, Buerhan and Tareq, Mohammad Ali (2018) Unveiling the diversification benefits of Islamic equities and commodities: evidence from multivariate-GARCH and continuous wavelet analysis. Managerial Finance, 44 (6). pp. 830-850. ISSN 0307-4358

Puniran, K. N. and Robiah, Ahmad and Dziyauddin, Rudzidatul Akmam (2018) RF energy harvesting with multiple sources in wireless mesh network. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 606-616. ISSN 2502-4752

Puniran, Khairul Nizam and Ahmad, Robiah and Dziyauddin, Rudzidatul Akmam (2017) RF energy harvesting with multiple sources and co-channel interference assisted. Journal of Advanced Research in Business and Management Studies, 8 (2). pp. 50-55. ISSN 2462-1935

Purba, L. D. A. and Abdullah, N. and Halim, M. H. A. and Yuzir, A. and Zamyadi, A. (2019) Performance of aerobic granular sludge for domestic wastewater treatment. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3851-3854. ISSN 2278-3075

Purba, L. D. A. and Ibiyeye, H. T. and Yuzir, A. and Mohamad, S. E. and Iwamoto, K. and Zamyadi, A. and Abdullah, N. (2020) Various applications of aerobic granular sludge: a review. Environmental Technology & Innovation, 20 . ISSN 2352-1864

Purba, L. D. A. and Yuzir, A. and Zamyadi, A. and Halim, M. H. A. and Zeca, E. D. and Abdullah, N. (2021) Cultivation of aerobic granular sludge by modification of seeding condition. Desalination and Water Treatment, 223 . ISSN 1944-3994

Purba, Laila Dina Amalia and Ibiyeye, Hamzat Tijani and Yuzir, Ali and Mohamad, Shaza Eva and Iwamoto, Koji and Zamyadi, Arash and Abdullah, Norhayati (2020) Various applications of aerobic granular sludge: A review. Environmental Technology and Innovation, 2 . p. 101045. ISSN 2352-1864

Purba, Laila Dina Amalia and Md. Khudzari, Jauharah and Iwamoto, Koji and Mohamad, Shaza Eva and Yuzir, Ali and Abdullah, Norhayati and Shimizu, Kazuya and Hermana, Joni (2022) Discovering future research trends of aerobic granular sludge using bibliometric approach. Journal of Environmental Management, 303 (114150). pp. 1-11. ISSN 0301-4797

Purba, Laila Dina Amalia and Othman, Fatin Syahirah and Yuzir, Ali and Mohamad, Shaza Eva and Koji, Iwamoto and Abdullah, Norhayati and Kazuya, Shimizu and Hermana, Joni (2022) Enhanced cultivation and lipid production of isolated microalgae strains using municipal wastewater. Environmental Technology and Innovation, 27 (NA). pp. 1-11. ISSN 2352-1864

Pushpamalar, Janarthanan and Meganathan, Puviarasi and Tan, Hui Li and Dahlan, Nuraina Anisa and Ooi, Li-Ting and Bibi Noorheen Haleema Mooneerah Neerooa, Bibi Noorheen Haleema Mooneerah Neerooa and Essa, Raahilah Zahir and Shameli, Kamyar and Teow, Sin-Yeang (2021) Development of a polysaccharide-based hydrogel drug delivery system (DDS): An update. Gels Volume , Issue, 7 (4). pp. 1-22. ISSN 2310-2861

Pushparaj, Karthika and Liu, Wen-Chao and Meyyazhagan, Arun and Orlacchio, Antonio and Pappusamy, Manikantan and Vadivalagan, Chithravel and Robert, Asirvatham Alwin and Arumugam, Vijaya Anand and Kamyab, Hesam (2022) Nano- from nature to nurture: A comprehensive review on facets, trends, perspectives and sustainability of nanotechnology in the food sector. Energy, 240 (NA). pp. 1-17. ISSN 0360-5442

Pushparaja, Vatsala and Che Mohd. Yusoff, Rasimah and Maarop, Nurazean and Shariff, Sya Azameela and Megat Zainuddin, Norziha (2021) User experience factors that influence users’ satisfaction of using digital library. Open International Journal of Informatics (OIJI), 9 (3). pp. 1-9. ISSN 2289-2370

Putra, A. W. S. and Yamada, M. and Tsuda, H. and Ambran, S. (2017) Theoretical analysis of noise in erbium doped fiber amplifier. IEEE Journal of Quantum Electronics, 53 (4). ISSN 0018-9197

Putra, Dwi AD and Jasmi, Kamarul Azmi and Basiron, Busrah and Huda, Miftachul and Maseleno, Andino and Shankar, K and Aminudin, Nur (2018) Tactical Steps for e-Government Development. International Journal of Pure and Applied Mathematics, 119 (15). pp. 2251-2258. ISSN 1314-3395

Putranti, V. and Ismail, Z. H. (2017) Robust-save energy controller on an autonomous underwater vehicle with obstacles avoidance. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2572-2578. ISSN 0975-1033

Quan, Le Minh and Yabar, Helmut and Warmadewanthi I. D. A. A., Warmadewanthi I. D. A. A. and Muhammad Yuzir, Muhamad Ali (2022) Simulation of sewage sludge air gasification and application of electricity and steam generation: Case study of Pantai 1 sewage treatment plant. Energy Conversion and Management, 270 (NA). pp. 1-17. ISSN 0196-8904

Quoquab, Farzana and Mahadi, Nomahaza and Jamshidian, Atefeh and Abdul Rasid, Siti Zaleha (2015) Job stressors and employee turnover intention: lessons learned from Malaysian oil and gas industry. Advanced Science Letters, 21 (6). pp. 1746-1749. ISSN 1936-6612

Qureshi, Hammad Hassan and Wong, Doris Hooi Ten (2020) Towards user-centric standardization of mobile applications design model for visually impaired people. ICIC Express Letters, Part B: Applications, 11 (4). pp. 319-325. ISSN 2185-2766

Qureshi, Muhammad Imran and Elashkar, Elsayed Elsherbini and Shoukry, Alaa Mohamd and Aamir, Alamzeb and Nik Mahmood, Nik Hasnaa and Md. Rasli, Amran and Zaman, Khalid (2019) Measuring the ecological footprint of inbound and outbound tourists: evidence from a panel of 35 countries. Clean Technologies and Environmental Policy, 21 (10). pp. 1949-1967. ISSN 1618-954X

Raazali, N. A. M. and Mohammad, R. and Othman, N. and Kadir, Z. A. (2020) Standard time of import paperwork clearance department for sustainability organization performance in forwarding company. Journal of Environmental Treatment Techniques, 8 (1). pp. 504-520. ISSN 2309-1185

Rachman, M. A. and Eniya, L. D. and Widyastuti, E. T. (2015) Biohydrogen production from fermentation of sweet sorhgum (Sorghum biocular L) by Interobacter aerogenes ADH-43 in the packed-bed reactor. Jurnal Teknologi, 75 (6). pp. 67-72. ISSN 0127-9696

Radzi, A. Q. M. and Noorazizi, M. S. and Ranai, N. M. (2020) Experimental studies on savonius wind turbine with unidirectional rotor house for high speed application. International Journal of Emerging Trends in Engineering Research, 8 (1). ISSN 2347-3983

Rahim, R. A. and Mahmood, N. H. N. and Masrom, M. (2017) Innovation and knowledge management as the catalyst of small medium enterprise’s performance: a conceptual paper. Advanced Science Letters, 23 (4). pp. 2727-2730. ISSN 1936-6612

Rahima, S. K. A. and Hakimi, S. and Yamada, Y. and Michishita, N. (2017) Investigation of pencil and bifurcated beam fed cylindrical dielectric lens antenna for 5G mobile base stations. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 27-32. ISSN 2180-1843

Rahmad, Nur Azmina and As'ari, Muhammad Amir and Ghazali, Nurul Fathiah and Shahar, Norazman and Sufri, Nur Anis Jasmin (2018) A survey of video based action recognition in sports. Indonesian Journal of Electrical Engineering and Computer Science, 11 (3). pp. 987-993. ISSN 2502-4752

Rahman, A. H. A. and Ariffin, K. A. Z. and Sani, N. S. and Zamzuri, H. (2017) Pedestrian detection using triple laser range finders. International Journal of Electrical and Computer Engineering, 7 (6). pp. 3037-3045. ISSN 2088-8708

Rahman, F. A. and Desa, M. I. and Wibowo, A. and Haris, N. A. (2016) An improvement of Knowledge Discovery Database (KDD) framework for effective decision. Journal of Artificial Intelligence, 9 (4). pp. 72-77. ISSN 1994-5450

Rahman, F. K. and Tareq, M. A. and Yunanda, R. A. and Mahdzir, A. (2017) Maqashid Al-Shari'ah-based performance measurement for the halal industry. Humanomics, 33 (3). pp. 357-370. ISSN 0828-8666

Rahman, F. K. and Tareq, M. A. and Yunanda, R. A. and Mahdzir, A. (2017) Maqashid Al-Shari’ah-based performance measurement for the halal industry. Humanomics, 33 (3). pp. 357-370. ISSN 0828-8666

Rahman, H. A. and Khor, K. X. and Yeong, C. F. and Su, E. L. M. and Narayanan, A. L. T. (2017) The potential of iRest in measuring the hand function performance of stroke patients. Bio-Medical Materials and Engineering, 28 (2). pp. 105-116. ISSN 0959-2989

Rahman, H. A. and Yeong, C. F. and Khor, K. X. and Su, E. L. M. (2017) Important parameters for hand function assessment of stroke patients. Telkomnika (Telecommunication Computing Electronics and Control), 15 (4). pp. 1501-1511. ISSN 1693-6930

Rahman, Mashiur and Abdul Rasid, Siti Zaleha and Basiruddin, Rohaida (2020) Corporate social responsibility reporting and value relevance of the banking sector in Bangladesh. Journal of Sustainability Science and Management, 15 (5). pp. 192-214. ISSN 1823-8556

Rahman, Md. Mujibur and Yahya, Wira Jazair and Abd. Kadir, Hasannuddin and Ithnin, Ahmad Muhsin and Mohd. Tamam, Qayyum and Abdul Rahman, Hasbullah (2022) Comparison of diesel engine performance between a mechanical pump and a common rail fuel injection system equipped with real-time nonsurfactant emulsion fuel supply system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 41-50. ISSN 2289-7879

Rahman, Mukhlis A. and Ghazali, Mohd. Akmal and Wan Abd Aziz, Wan Muhammad Solehin and Othman, Mohd. Hafiz Dzarfan and Jaafar, Juhana and Ismail, Ahmad Fauzi (2015) Preparation of titanium dioxide hollow fiber membrane using phase inversion and sintering technique for gas separation and water purification. Sains Malaysiana, 44 (8). pp. 1195-1201. ISSN 0126-6039

Rahman, N. M. A. and Zaki, N. I. M. and Husain, M. K. A. (2019) Implementation of sustainable energy management programme in Hospital Langkawi. International Journal of Civil Engineering and Technology, 10 (2). ISSN 0976-6308

Rahman, W. A. Z. W. A. and Zaki, N. I. M. and Husain, M. K. A. (2019) A review of work breakdown structure and man-hours estimation method used in shipbuilding production. International Journal of Mechanical Engineering and Technology, 10 (1). pp. 1141-1158. ISSN 0976340

Rahmani, H. and Anuar, A. N. (2019) Challenges and resolutions for sustainable domestic wastewater management in Kabul city, Afghanistan. International Journal of Engineering and Advanced Technology, 9 (1). pp. 1394-1401. ISSN 2249-8958

Rahmani, Rasoul and Yusof, Rubiyah and Ismail, Nordinah (2015) A new metaheuristic algorithm for global optimization over continuous search space. ICIC Express Letters, 9 (5). pp. 1335-1340. ISSN 1881-803X

Rahmat, Mohd. Fua'ad and Sabit, Hakilo Amed (2007) Application of neural network technique and electrodynamic sensors in the identification of solid flow regimes. Jurnal Teknologi, 46 (D). pp. 77-92. ISSN 0127-9696

Raja Shahminan, Raja Nafida and Ahmad @ Taufik, Fadhlina and Ibrahim, Fawazul Khair and Zainal Abidin, Nabilah (2022) Incorporating the usage of 3D modelling programming in teaching architectural heritage design. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 83-91. ISSN 0128-1666

Rakhmania, Rakhmania and Kamyab, Hesam and Yuzir, Muhammad Ali and Riyadi, Fatimah Azizah and Ostadrahimi, Alireza and Khademi, Tayebeh and Ghfar, Ayman A. and Kirpichnikova, Irina (2022) Electrochemical oxidation of palm oil mill effluent using platinum as anode: Optimization using response surface methodology. Environmental Research, 214 (NA). pp. 1-10. ISSN 0013-9351

Ramachandran, Supramaniam and Abd. Rahman, Mohd. Norani (1987) Wireline techniques for monitoring reservoir fluid movement and recommendations for Malaysian oil and gas fields. Buletin FKKKSA, 1 (1). pp. 62-84. ISSN 0128-0740

Ramachandran, V. and Ismail, F. S. and Megat Mohd. Noor, M. J. and M. D. Akhir, F. N. and Othman, N. and Zakaria, Z. and Hara, H. (2020) Extraction and intensive conversion of lignocellulose from oil palm solid waste into lignin monomer by the combination of physico-chemical and biological treatment. Bioresource Technology Reports, 11 .

Ramachandran, Vasagi and Jusoh, Noor Shartika and Megat Mohd. Noor, Megat Johari and Md. Akhir, Fazrena Nadia and Othman, Nor’azizi and Zakaria, Zuriati and Hirofumi, Hara (2020) Chemical-free extraction and identification of sugar components from oil palm biomass through a hydrothermal process. Waste and Biomass Valorization . p. 9. ISSN 1877-2641

Ramanathan, Santheraleka and Gopinath, Subash C. B. and Ismail, Zool Hilmi and Md. Arshad, M. K. and Poopalan, Prabakaran (2022) Aptasensing nucleocapsid protein on nanodiamond assembled gold interdigitated electrodes for impedimetric SARS-CoV-2 infectious disease assessment. Biosensors and Bioelectronics, 197 (NA). pp. 1-9. ISSN 0956-5663

Rambat, S. and Abdullah, N. M. and Yaacob, N. and Othman, N. (2021) Comparison of gravity anomalies from recent global geopotential models with terrestrial gravity and airborne gravity over Johor region. International Journal of Integrated Engineering, 13 (3). pp. 75-86. ISSN 2229-838X

Ramli, Mohamad Faizal and Senin, Aslan Amat (2021) Factors affecting effective university industry collaboration during the development research stage. International Journal of Management Studies (IJMS), 28 (2). pp. 127-159. ISSN 2249-0302

Ramli, Ramona and Abu Bakar, Asmidar and Abdul Rahim, Fiza (2022) What influences customer’s trust on online social network sites (SNSS) sellers? International Journal of Advanced Computer Science and Applications, 13 (1). pp. 1-10. ISSN 2158-107X

Ramlie, Faizir and Muhamad, W. and Jamaludin, Khairur Rijal and Cudney, Elizabeth A. and Dollah, R. (2020) A significant feature selection in the Mahalanobis Taguchi system using modified-bees algorithm. International Journal of Engineering Research and Technology, 13 (1). pp. 117-136. ISSN 0974-3154

Ramlie, Faizir and Wan Muhamad, Wan Zuki Azman and Harudin, Nolia and Abu, Mohd. Yazid and Yahaya, Haryanti and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah (2021) Classification performance of thresholding methods in the Mahalanobis–Taguchi system. Applied Sciences (Switzerland), 11 (9). p. 3906. ISSN 2076-3417

Ramzi, Nur Ain Shafiza and Lee, Kee Quen and Mohd. Zainuri, Nur Amira Balqis and Kang, Hooi-Siang and Othman, Nor’Azizi and Wong, Keng Yinn (2022) Flow induced vibration in square cylinder of various angles of attack. IIUM Engineering Journal, 23 (1). pp. 358-369. ISSN 1511-788X

Ramzi, Nur Ain Shafiza and Lee, Kee Quen and Senga, Hidetaka and Kang, Hooi Siang and Lim, Meng Hee and Mohd. Sukarnoor, Noor Idora (2022) Suppression of vortex-induced vibration of a rigid cylinder using flexible shrouding. Applied Ocean Research, 123 (NA). pp. 1-15. ISSN 0141-1187

Ranjbar, N. and Zaki, S. A. and Yusoff, N. M. and Hagishima, A. (2017) Time series data analysis of household electricity usage during el-nino in Malaysia. Chemical Engineering Transactions, 56 . pp. 379-384. ISSN 2283-9216

Rashid, Roslina and Jamaluddin, Hishamuddin and Saidina Amin, Nor Aishah (2005) Parameter estimation of tapioca starch hydrolysis process: application of least squares and genetic algorithm. The Journal of The Institution of Engineers, Malaysia, 66 (3). pp. 51-60. ISSN 0126-513X

Rashid, M. Z. A. and Yakub, F. and Zaki, S. A. and Ali, M. S. M. and Mamat, N. M. and Mohd. Putra, S. M. A. and Roslan, S. A. and Shah, H. N. M. and Aras, M. S. M. and Arshad, M. R. (2019) Reconfigurable multi-legs robot for pipe inspection: design and gait movement. Indian Journal of Geo-Marine Sciences, 48 (7). pp. 1132-1144. ISSN 0379-5136

Rashid, Mariyah and N. Huda, N. Huda and Hussein, Norelyza and N. Hasyimah, N. Hasyimah (2015) Comparison of the performance of MR-deDuster with other conventional cyclones. Sains Malaysiana, 44 (4). pp. 565-569. ISSN 0126-6039

Rashid, S. A. and Wahab, M. H. and Wan Mohd. Rani, W. N. M. (2017) Street design and women's safety perception. Planning Malaysia, 15 (4). pp. 13-20. ISSN 1675-6215

Rashid, S. A. and Wahab, M. H. and Wan Mohd. Rani, W. N. M. (2017) Street design and women’s safety perception. Planning Malaysia, 15 (4). pp. 13-20. ISSN 1675-6215

Rashid, Roslina and Saidina Amin, Nor Aishah and Jamaluddin, Hishamuddin (2001) Modeling of tapioca starch hydrolysis using neural networks. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 461-465.

Razak, Khamarrul Azahari and Straatsma, Menno W. and van Westen, Cees J. and Malet, Jean Philippe and de Jong, Steven M. (2011) Airborne laser scanning of forested landslides characterization: terrain model quality and visualization. Geomorphology, 126 (1-2). pp. 186-200. ISSN 0169-555X

Razali, M. N. H. A. and Salim, S. A. Z. S. and Ali, M. S. M. and Ahmad, N. H. (2017) Large-eddy simulation of wind flow within a canyon between modified idealized terraced houses. Journal of Mechanical Engineering, SI 2 (2). pp. 243-253. ISSN 1823-5514

Razali, N. M. and Mazlan, A. N. and Salebi, M. F. and Mohamed, H. and Ambran, S. (2019) Optical fiber tip sensor for glucose-adulterated honey detection. Telkomnika (Telecommunication Computing Electronics and Control), 17 (5). pp. 2445-2450. ISSN 1693-6930

Razami, H. H. and Ibrahim, R. (2020) Investigating the factors that influence the acceptance of mooc as a supplementary learning tool in higher education. Journal of Advanced Research in Dynamical and Control Systems, 12 (3). pp. 522-530. ISSN 1943-023X

Razami, Husna Hafiza and Ibrahim, Roslina (2021) Distance education during COVID-19 pandemic: The perceptions and preference of university students in Malaysia towards online learning. International Journal of Advanced Computer Science and Applications, 12 (4). pp. 118-126. ISSN 2158-107X

Razami, Husna Hafiza and Ibrahim, Roslina (2022) Models and constructs to predict students’ digital educational games acceptance: a systematic literature review. Telematics and Informatics, 73 (NA). pp. 1-22. ISSN 0736-5853

Reddy, Thummala Sankar and P. Roja, P. Roja and Ibrahim, S. Mohammed and Lorenzini, Giulio and Che Sidik, Nor Azwadi (2022) Characteristic of thermal radiation on MHD fluid stream of nano-fluid over an exponentially elongating sheet by means of warm and mass fluxes. CFD Letters, 14 (5). pp. 87-97. ISSN 2180-1363

Rezaei, Zahra and Selamat, Ali and Taki, Arash and Mohd. Rahim, Mohd. Shafry (2018) Thin cap fibroatheroma detection in virtual histology images using geometric and texture features. Applied Sciences (Switzerland), 8 (9). p. 1632. ISSN 2076-3417

Rezania, S. and Din, M. F. M. and Taib, S and Sohaili, J. and Chelliapan, S. and Kamyab, H. and Saha, B. B. (2017) Review on fermentative biohydrogen production from water hyacinth, wheat straw and rice straw with focus on recent perspectives. International Journal of Hydrogen Energy, 42 (33). pp. 20955-20969. ISSN 0360-3199

Rijal, Omar Mohd. and Ebrahimian, Hossein and Mohd. Noor, Norliza and Hussin, Amran and Yunus, Ashari and Ahmad Mahayiddin, Aziah (2015) Application of phase congruency for discriminating some lung diseases using chest radiograph. Computational And Mathematical Methods In Medicine, 2015 . ISSN 1748-5037

Ripin, Adnan and Abdul Aziz, Ramlan (1993) Sistem perawatan minyak mentah bagi alat penuras vakum drum berputar. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-5.

Ripin, Adnan and Abdul Aziz, Ramlan and Mohamed , N.H. and Abu Che', N (1992) Penurasan vakum arah atas dan bawah. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-4.

Ripin, Adnan and Junin, Radzuan and Karim, Khairuddin (1995) Penyahwarnaan minyak sawit mentah menggunakan lempung teraktif tempatan. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A8-1.

Riyadi, F. A. and Tahir, A. A. and Yusof, N. and Sabri, N. S. A. and Noor, M. J. M. M. and Akhir, F. N. M. D. and Othman, N. and Zakaria, Z. and Hara, H. (2020) Enzymatic and genetic characterization of lignin depolymerization by streptomyces sp. S6 isolated from a tropical environment. Scientific Reports, 10 (1). pp. 1-9. ISSN 2045-2322

Rizuan, Norhaniza and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah and Yunus, Nurul Azhani (2020) Enhancement of sensitivity of magnetostrictive foam in low magnetic fields for sensor applications. Polymer, 211 . p. 123083. ISSN 0032-3861

Rizuan, Norhaniza and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Sedlacik, Michal and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah and Homma, Koji and Rambat, Shuib (2021) Sensitivities of rheological properties of magnetoactive foam for soft sensor technology. Sensors, 21 (5). pp. 1-19. ISSN 1424-8220

Rohani, M. F. and Ahmad, N. A. and Sahibuddin, S. and Daud, S. M. (2017) OPC protocol application for real-time carbon monitoring system for industrial environment. International Journal of Electrical and Computer Engineering, 7 (2). pp. 1051-1059. ISSN 2088-8708

Rohim, Muhamad Amirul Sunni and Nazmi, Nurhazimah and Bahiuddin, Irfan and Mazlan, Saiful Amri and Norhaniza, Rizuan and Yamamoto, Shin-ichiroh and Nordin, Nur Azmah and Abdul Aziz, Siti Aishah (2022) Prediction for magnetostriction magnetorheological foam using machine learning method. Journal of Applied Polymer Science, 139 (34). n/a. ISSN 0021-8995

Rohman, A. and Windarsih, A. and Riyanto, S. and Sudjadi, Sudjadi and Shuhel Ahmad, S. A. and Rosman, A. S. and Yusoff, F. M. (2016) Fourier transform infrared spectroscopy combined with multivariate calibrations for the authentication of avocado oil. International Journal of Food Properties, 19 (3). pp. 680-687. ISSN 1094-2912

Roja, P. and Reddy, T. Sankar and Ibrahim, S. M. and Lorenzini, G. and Che Sidik, Nor Azwadi (2022) The effect of thermophoresis on MHD stream of a micropolar liquid through a porous medium with variable heat and mass flux and thermal radiation. CFD Letters, 14 (4). pp. 118-136. ISSN 2180-1363

Rojek, T. and Gubler, L. and Nasef, M. M. and Abouzari Lotf, E. (2017) Polyvinylamine-containing adsorbent by radiation-induced grafting of n-vinylformamide onto ultrahigh molecular weight polyethylene films and hydrolysis for CO2 capture. Industrial and Engineering Chemistry Research, 56 (20). pp. 5925-5934. ISSN 0888-5885

Roshandeh, Arash Moradkhani and Nesheli, Mahmood Mahmoodi and Che Puan, Othman (2009) Evaluation of traffic characteristics: a case study. International Journal of Recent Trends in Engineering (Civil Engineering), 1 (6). pp. 62-68. ISSN 1797-9617

Roslan, M. S. and Chaudary, K. and Haider Rizvi, S. Z. and Daud, S. and Ali, J. and Munajat, Y. (2016) Arc discharge synthesis of CNTs in hydrogen environment in presence of magnetic field. Jurnal Teknologi, 78 (3). pp. 257-260. ISSN 0127-9696

Roslan, S. A. H. and Yusof, Z. and Rasid, Z. A. and Yahaya, M. H. and Hassan, M. Z. and Mahmud, J. (2019) Dynamic instability response of smart composite material. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 302-310. ISSN 0933-5137

Roslan, Shairatul Akma and Yakub, Fitri and Saidin, Mokhtar and Rambat, Shuib and Mohamed Attwa, Mohamed Attwa and Ab. Rashid, Mohd. Zamzuri (2021) A comparative assessment for the archaeological features detection using an integration of aerial remote sensing and electrical resistivity in Sungai Batu, Bujang Valley. Journal of the Indian Society of Remote Sensing, 49 (12). pp. 2959-2975. ISSN 0255-660X

Rosli, N. A. I. M. and Rahman, M. A. A. and Balakrishnan, M. and Komeda, T. and Mazlan, S. A. and Zamzuri, H. (2017) Improved gender recognition during stepping activity for rehab application using the combinatorial fusion approach of EMG and HRV. Applied Sciences (Switzerland), 7 (4). ISSN 2076-3417

Rosli, N. A. I. M. and Rahman, M. A. A. and Balakrishnan, M. and Mazlan, S. A. and Zamzuri, H. (2017) The fusion of HRV and EMG signals for automatic gender recognition during stepping exercise. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 756-762. ISSN 1693-6930

Rossli, S. A. and Ahmad, R. and Thirugnana, S. T. (2021) Solar harvesting system for a manufacturing plant using energy forecasting ARIMA model. International Energy Journal, 21 (3). pp. 347-360. ISSN 1513-718X

Rostami, Mohammadreza Hasandust and Najafi, Gholamhassan and Motevalli, Ali and Che Sidik, Nor Azwadi and Harun, Muhammad Arif (2021) Evaluation and improvement of thermal energy of heat exchangers with SWCNT, GQD nanoparticles and PCM (RT82). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (1). pp. 153-168. ISSN 2289-7879

Roudi, A. M. and Akhlaghi, E. and Chelliapan, S. and Kaboli, A. and Aslani, H. and Selvam, S. B. (2015) Treatment of landfill leachate via Advanced Oxidation Process (AOPs) - A review. Research Journal Of Pharmaceutical, Biological And Chemical Sciences, 6 (4). pp. 260-271. ISSN 0975-8585

Ruthiraan, M. and Abdullah, E. C. and Mubarak, N. M. and Noraini, M. N. (2017) A promising route of magnetic based materials for removal of cadmium and methylene blue from waste water. Journal of Environmental Chemical Engineering, 5 (2). pp. 1447-1455. ISSN 2213-3437

Ruthiraan, M. and Mubara, N. M. and Abdullah, E. C. and Khalid, Mohammad and Nizamuddin, Sabzoi and Walvekar, Rashmi and Karri, Rama Rao (2019) An overview of magnetic material: Preparation and adsorption removal of heavy metals from wastewater. Magnetic Nanostructures . pp. 131-159. ISSN 2523-8027

Ruthiraan, Manimaran and Mubarak, Nabisab Mujawar and Thines, Raj Kogiladas and Abdullah, Ezzat Chan and Sahu, Jaya Narayan and Jayakumar, Natesan Subramanian and Ganesan, Poobalan (2015) Comparative kinetic study of functionalized carbon nanotubes and magnetic biochar for removal of Cd2+ ions from wastewater. Korean Journal Of Chemical Engineering, 32 (3). pp. 446-457. ISSN 0256-1115

S., Sarah and A. Rahman, W. A. W. and A. Majid, R. and Yahya, W. J. and Adrus, N. and Hasannuddin, A. K. and Low, J. H. (2018) Optimization of pineapple leaf fibre extraction methods and their biodegradabilities for soil cover application. Journal of Polymers and the Environment, 26 (1). pp. 319-329. ISSN 1566-2543

Saad, Ismail and Taghi Ahmadi, M. and Riyadi, Munawar A. and Ismail, Razali and Arora, Vijay K. (2009) Numerical analysis of carrier statistics in low-dimensional nanostructure devices. Jurnal Teknologi, 50 (D). pp. 109-117. ISSN 2180-3722

Saad, Nor Liza and Khairudin, Nurkhairizan and Azizan, Azilawati and Abd. Rahman, Abdullah Sani and Ibrahim, Roslina (2022) Context-aware recommender system based on machine learning in tourist mobile application. Mathematical Sciences and Informatics Journal, 3 (1). pp. 19-28. ISSN 2735-0703

Saad, Wasan Kadhim and Shayea, Ibraheem and Hamza, Bashar J. and Azizan, Azizul and Ergen, Mustafa and Alhammadi, Abdulraqeb (2022) Performance evaluation of mobility robustness optimization (MRO) in 5G network with various mobility speed scenarios. IEEE Access, 10 (NA). pp. 60955-60971. ISSN 2169-3536

Sabet, Mazyiar and Hassan, Azman and Wahit, Mat Uzir (2007) Modified effects of LDPE/EVA blends by electron beam irradiation. The Proceedings of Regional Annual Fundamental Science Seminar (RAFSS) 2007 . pp. 96-103.

Sabri, N. S. A. and Zakaria, Z. and Mohamad, S. E. and Jaafar, A. B. and Hara, H. (2018) Importance of soil temperature for the growth of temperate crops under a tropical climate and functional role of soil microbial diversity. Microbes and Environments, 33 (2). pp. 144-150. ISSN 1342-6311

Sabri, N. S. A. and Zakaria, Z. and Mohamad, S. E. and Jaafar, A. B. and Hara, H. (2020) The use of soil cooling for growing temperate crops under tropical climate. International Journal of Environmental Science and Technology, 16 (3). pp. 1449-1456. ISSN 1735-1472

Sabri, Sharizal Fadlie and Ahmad, Noor Azurati and Sahibuddin, Shamsul and Mohd. Daud, Salwani and Kamardin, Kamilia (2018) Energy performance evaluation for dynamic frequency scaling on rate monotonic and earliest deadline first scheduling algorithm. International Journal of Advanced and Applied Sciences, 5 (1). pp. 143-147. ISSN 2313-626X

Sabtu, A. and Azmi, N. F. M. and Sjarif, N. N. A. and Ismail, S. A. and Yusop, O. M. and Sarkan, H. and Chuprat, S. (2017) The challenges of extract, transform and load (ETL) for data integration in near real-time environment. Journal of Theoretical and Applied Information Technology, 95 (22). pp. 6314-6322. ISSN 1992-8645

Sadaghiani, Mirhadi S. and Arash, Arami-Niya and Zhang, Dongke and Tsuji, Tomoya and Tanaka, Yukio and Seiki, Yoshio and May, Eric F. (2021) Minimum ignition energies and laminar burning velocities of ammonia, HFO-1234yf, HFC-32 and their mixtures with carbon dioxide, HFC-125 and HFC-134a. Journal of Hazardous Materials, 407 . p. 124781. ISSN 0304-3894

Sadali, M. F. and Hassan, M. Z. and Ahmad, F. and Yahaya, H. and Rasid, Z. A. (2020) Influence of selective laser melting scanning speed parameter on the surface morphology, surface roughness and micropores for manufactured Ti6Al4V parts. Journal of Materials Research, 35 (15). pp. 2025-2035. ISSN 0884-2914

Sadali, M. F. and Hassan, M. Z. and Ahmad, N. H. and Yahya, H. and Nor, A. F. M. (2019) Effect of hatching distance on surface morphology and surface roughness of the TI6AL4V for biomedical implant using SLM process. Malaysian Journal of Microscopy, 15 (1). pp. 72-82. ISSN 1823-7010

Saeed, Anwar Ameen Hezam and Yub Harun, Noorfidza and Nasef, Mohammed Mahmoud and Amin Al-Fakih, Amin Al-Fakih and Saeed Ghaleb, Aiban Abdulhakim and Afolabi, Haruna Kolawole (2022) Removal of cadmium from aqueous solution by optimized rice husk biochar using response surface methodology. Ain Shams Engineering Journal, 13 (1). pp. 1-12. ISSN 2090-4479

Saeed, Sohail and Abdul Rasid, Siti Zaleha and Basiruddin, Rohaida (2016) Do board size and independence really matter? An empirical study. Research Journal of Finance and Accounting, 7 (13). pp. 20-27. ISSN 2222-1697

Safitri, C. and Hassan, W. H. and Goudarzi, S. (2017) Dynamic content management for mobile subscribers: a survey. Advanced Science Letters, 23 (5). pp. 4119-4123. ISSN 1936-6612

Safitri, C. and Yamada, Y. and Baharun, S. and Goudarzi, S. and Nguyen, Q. N. and Yu, K. and Sato, T. (2018) An intelligent content prefix classification approach for quality of service optimization in information-centric networking. Future Internet, 10 (4). ISSN 1999-5903

Safwat, Basil and Su, Eileen L. M. and Gassert, Roger and Teo, Chee Leong and Burdet, Etienne (2009) The role of posture, magnification, and grip force on microscopic accuracy. Annals of Biomedical Engineering, 37 (5). pp. 997-1006. ISSN 0090-6964

Saharuddin, K. D. and Mohammed Ariff, M. H. and Bahiuddin, I. and Mazlan, S. A. and Abdul Aziz, S. A. and Nazmi, N. and Fatah, A. Y. A. and Mohmad, K. (2020) Constitutive models for predicting field-dependent viscoelastic behavior of magnetorheological elastomer using machine learning. Smart Materials and Structures, 29 (8). ISSN 0964-1726

Saharudin, M. A. and Nordiana, M. M. and Norzaida, A. (2017) Integrating geophysical methods in determining the geophysical parameters for subsurface structures. International Journal of Civil Engineering and Technology, 8 (10). pp. 1670-1678. ISSN 0976-6308

Sahibuddin, Shamsul and Amir Sjarif, Nilam Nur and Hussein, Inass Shahadha (2018) Shape feature extraction methods based pattern recognition: a survey. Open International Journal of Informatics (OIJI), 6 (4). pp. 26-41. ISSN 2289-2370

Sahibuddin, Shamsul and Muyet, Zalehah (2022) Analysing the factors influencing devOps adoption in the existing devOps adoption models: a systematic review author. Open International Journal Of Informatics, 10 (2). pp. 97-107. ISSN 2289-2370

Sahir, Nurul Nadiah and Hassan, Noor Azlina and Hassan, Norita and Johari, Norhasnidawani (2021) Graphene oxide microcapsules (GOMs) with linseed oil core via pickering emulsion method: Effect of disperse speed. IIUM Engineering Journal, 22 (1). pp. 213-222. ISSN 1511-788X

Saidi, Hamdani (1988) Prospek jurutera kimia. Buletin FKKKSA, 2 (1). pp. 1-6. ISSN 0128-0740

Saidi, Hamdani and Abdul Aziz, Ramlan and Hassan, H. and Ariffin, A. (1993) Design and manufacture of hollow fiber module gas separator. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-3.

Saidi, H. and Uthman, H. (2017) Phosphoric acid doped polymer electrolyte membrane based on radiation grafted poly(1-vinylimidazole-co-1-vinyl-2-pyrrolidone)-g-poly(ethylene/tetrafluoroethylene) copolymer and investigation of grafting kinetics. International Journal of Hydrogen Energy, 42 (14). pp. 9315-9332. ISSN 0360-3199

Saidi, Hamdani and A. Aziz, R and Ariffin, A. and Hassan, Hashim (1994) Performance of locally manufactured hollow-fiber membrane for CO2 separation. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Saidi, Hamdani and Abdul Aziz, Ramlan and Salleh, Intan Khalida (1992) Development of gas separation system by membrane-effects of different physical parameters on membrane formation. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-2.

Saidi, Hamdani and Che Yunus, Azizi (1989) Energy saving in a gas processing plant through application of a membrane system. Buletin FKKKSA, 3 (1). pp. 17-25. ISSN 0128-0740

Saidi, Hamdani and Ling, Kock Chieh and Tahir, Ismail and Abdul Aziz, Ramlan (1989) Separation of gas mixtures using hollow fiber membrane - pilot plant data analysis. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 205-216.

Saidin, Syafiqah and Ramlee, Muhammad Hanif and Saleh Al, Abdullah Sharaf (2022) Simulation analyses related to human bone scaffold: utilisation of solidworks® software in 3d modelling and mechanical simulation analyses. Journal of Human Centered Technology, 1 (2). pp. 17-23. ISSN 2821-3467

Saidina Amin, Nor Aishah and Anggoro, Didi Dwi (2003) Cu/W/HZSM-5 for methane conversion to liquid hydrocarbons. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 1077-1083.

Saidina Amin, Nor Aishah and Chong, C. M. (2004) Enhanced catalytic performance of Cu/Ag/CeO2 catalyst for the SCR of NO by propylene. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004 . pp. 1-73.

Saidina Amin, Nor Aishah and Chong, C. M. (2005) SCR of NO with C3H6 in the presence of excess O2 over Cu/Ag/CeO2-ZrO2 catalyst. Chemical Engineering Journal, 113 (1). pp. 13-25. ISSN 1385-8947

Saidina Amin, Nor Aishah and Mohd. Yusof, Khairiyah and Isha, Ruzinah (2005) Carbon dioxide reforming of methane to syngas: modeling using response surface methodology and artificial neural network. Jurnal Teknologi F (43F). pp. 15-30. ISSN 0127-9696

Saidina Amin, Nor Aishah and Anggoro, Didi Dwi (2002) Dealuminated ZSM-5 zeolite catalyst for ethylene oligomerization to liquid fuels. Journal of Natural Gas Chemistry , 11 (1-2). pp. 79-86. ISSN 1003-9953

Saidina Amin, Nor Aishah and Anggoro, Didi Dwi and Zakaria, Zaki Yamani and Prasetyoko, Didik and Tan, Eng Fong and Law, Kian Meng and Esam, Azwan (2001) Catalytic activity of Cu-ZSM-5 and HZSM-5 zeolite for single step conversion of methane to liquid hydrocarbon. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 46-52.

Saidina Amin, Nor Aishah and Asmadi, M. (2008) Optimization of empty palm fruit bunch pyrolysis over HZSM-5 catalyst for production of bio-oil. Unpublished . (Unpublished)

Saidina Amin, Nor Aishah and Chin, Sean Hon Keong and Chang, Nee San and Chan, Huang Shean and Teo, Puay Tiang (2001) Carbon dioxide reforming of methane over Ni/gamma-Al2O3, Ni/ZSM-5, Co/gamma-Al2O3 & Co/ZSM5. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 561-466.

Saidina Amin, Nor Aishah and Hii, King Kui and Istadi, Istadi (2003) Study of carbon dioxide-methane reaction using Co- and Ca- promoted MnO/gamma-Al2O3 catalysts. Journal of Physical Science, 14 . pp. 79-99.

Saidina Amin, Nor Aishah and Kasim, Farizul Hafiz (2001) The effect of different SiO2/Al2O3 ratios of HZSM-5 on the conversion of palm oil to liquid fuels. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 78-83.

Saidina Amin, Nor Aishah and Man Singh, Harjit Kaur and Mohd. Yusoff, Mohd. Rashid (2005) Removal of phenol and COD via catalytic treatment using activated carbon and alumina with ozone. Journal of Industrial Technology, 14 (2). pp. 175-182. ISSN 0128-4940

Saidina Amin, Nor Aishah and Mann, R (1989) Evaluation of a gas-liquid stirred reactor emulator via network models. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 338-354.

Saidina Amin, Nor Aishah and Parulekar, S.J. (1995) The effects of interactions between liquid film and bulk liquid on gas-liquid reactions in well-mixed reactors. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B14-1.

Saidina Amin, Nor Aishah and Tan , Eng Fong and Abdul Manan, Zainuddin (2001) Catalytic performance of ZrO2 and TiO2 supported copper catalysts for NOx reduction in the presence of oxygen. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 567-572.

Saiful Bahry, Farrah Diana and Masrom, Maslin and Anwar, Norizan (2015) Copyright act and determining relationship between software piracy related factors with ethical standards. Advanced Science Letters, 21 (5). pp. 1557-1560. ISSN 1936-6612

Saipol, H. F. S. and Mohd. Drus, S. and Othman, M. (2021) A review of big data analytics on customer complaints in the electricity industry. International Journal of Business Continuity and Risk Management, 11 (2-3). pp. 208-223. ISSN 1758-2164

Sakti, M. R. P. and Tareq, M. A. and Saiti, B. and Akhtar, T. (2017) Capital structure of Islamic banks: a critical review of theoretical and empirical research. Qualitative Research in Financial Markets, 9 (3). pp. 292-308. ISSN 1755-4179

Salahuddin, Lizawati and Ismail, Zuraini and Raja Ikram, Raja Rina and Hashim, Ummi Rabaah and Idris, Ariff and Ismail, Nor Haslinda and Hassan, Noor Hafizah and Abdul Rahim, Fiza (2020) Safe use of hospital information systems: an evaluation model based on a sociotechnical perspective. Behaviour and Information Technology, 39 (2). pp. 188-212. ISSN 0144-929X

Saleem, Kashif and Fisal, Norshiela and Ahmad Zabidi, Muhammad Mun’im (2008) Utilizing IXP-2400 to Provision QoS for Real Time Services on IPv6 DiffServ Network. Elektrika, 10 (1). pp. 49-53. ISSN 0128-4428

Saleh, Ruslan Anwar and Othman, Nooraini (2022) Overview of the causes of accident in construction industry: a comparative perspectives. International Journal of Academic Research in Economics and Management Sciences, 11 (4). pp. 1-12. ISSN 2226-3624

Saleki, Reza and Quoquab, Farzana and Mohammad, Jihad (2020) Factor affecting consumer's intention to purchase organic food: empirical study from Malaysian context. International Journal of Business Innovation and Research, 23 (2). pp. 168-182. ISSN 1751-0252

Saleki, Reza and Quoquab, Farzana and Mohammad, Jihad (2020) What drives customer switching intention in Malaysian hotel industry? The hidden link. International Journal of Business Innovation and Research, 23 (1). pp. 18-40. ISSN 1751-0252

Saleki, Reza and Quoquab, Farzana and Mohammad, Jihad (2019) What drives Malaysian consumers’ organic food purchase intention? The role of moral norm, self-identity, environmental concern and price consciousness. Journal of Agribusiness in Developing and Emerging Economies, 9 (5). pp. 584-603. ISSN 2044-0839

Salih, Fathi Ibrahim and Abu Bakar, Nur Azaliah and Hassan, Noor Hafizah and Yahya, Farashazillah and Kama, Nazri and Shah, Jalal (2019) IOT security risk management model for healthcare industry. Malaysian Journal of Computer Science (3). pp. 131-144. ISSN 0127-9084

Salim, H. K. and Padfield, R. (2017) Environmental management system in the food & beverage sector: A case study from Malaysia. Chemical Engineering Transactions, 56 . pp. 253-258. ISSN 2283-9216

Salim, H. K. and Padfield, R. and Hansen, S. B. and Mohamad, S. E. and Yuzir, A. and Syayuti, K. (2018) Global trends in environmental management system and ISO14001 research. Journal of Cleaner Production, 170 . pp. 645-653. ISSN 0959-6526

Salim, H. K. and Padfield, R. and Yuzir, A. and Mohamad, S. E. (2017) Towards sustainable food production: exploring the opportunities and challenges in Indonesia. Advanced Science Letters, 23 (9). pp. 8505-8510. ISSN 1936-6612

Salim, Hengky K. and Padfield, Rory and Lee, Chew Tin and Syayuti, Khadijah and Papargyropoulou, Effie and Tham, Mun Hou (2018) An investigation of the drivers, barriers, and incentives for environmental management systems in the Malaysian food and beverage industry. Clean Technologies and Environmental Policy, 20 (3). pp. 529-538. ISSN 1618-954X

Salim, Kamilah Radin and Abdullah, Morina and Ali, Nor Liza and Ali, Rosmah (2018) Usage of online learning resources among academic staff at Malaysian University. International Journal of Engineering & Technology, 7 (3.25). pp. 16-20. ISSN 2227-524X

Salim, Kamilah Radin and Abdullah, Morina and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ishak, Ruzana (2019) A team-teaching model in an informal cooperative learning classroom. International Journal of Emerging Technologies in Learning, 14 (20). pp. 44-57. ISSN 1868-8799

Salim, S. and Razali, M. N. H. A. and Ikegaya, N. and Mohammad, A. F. and Ali, M. (2020) Numerical simulation of the effects of secondary roughness in the form of extension to arrays of terraced houses on pedestrian wind. Science and Technology for the Built Environment, 26 (7). pp. 928-940. ISSN 2374-4731

Salleh, Ahmad and Mohammad, Roslina and Abdul Talib, Hayati@Habibah (2017) Accident rate manufacturing plant: a case study at the pulp and paper industry in east coast Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 7 (1). pp. 10-19. ISSN 2462-1951

Salleh, N. and Yuhaniz, S. S. and Sabri, S. F. and Mohd. Azmi, N. F. (2020) Enhancing prediction method of ionosphere for space weather monitoring using machine learning approaches: a review. International Journal on Advanced Science, Engineering and Information Technology, 10 (1). pp. 9-15. ISSN 2088-5334

Salleh, Nor'asnilawati and Mohd. Daud, Salwani and Sabri, Sharizal Fadlie and Abd. Aziz, Nur Syazarin Natasha (2017) Temperature control method optimization with global criterion genetic algorithm in thermal vacuum chamber for satellite testing. International Journal of Advanced and Applied Sciences, 4 (12, 1). pp. 117-124. ISSN 2313-3724

Salleh, Siti Hasliah and Mohamed Yusof, Nor Ashikin and Saimy, Intan Sazrina and Ismail, Fadillah (2020) RWA scale of preparedness for healthcare personnel towards radiation emergency. Journal Of Science, Technology And Innovation Policy, 6 (1). pp. 1-7. ISSN 2550-2018

Salleh, Siti Zuraimi and Mat Safri, Norlaili and Ali, Siti Hajar Aminah (2009) Moving one dimensional cursor using extracted parameter from brain signals. Signal Processing: An International Journal (SPIJ), 3 (5). pp. 110-119. ISSN 1985-2339

Sallehuddin, Roselina and Shamsuddin, Siti Mariyam (2001) Kajian Ke Atas Parameter Model Rangkaian Rambatan Balik Untuk Peramalan: Kajian Kes Hasil Pengeluaran Getah. Jurnal Teknologi D (35D). pp. 15-26. ISSN 0127-9696

Sallehudin, Hasimi and Mohd. Aman, Azana Hafizah and Che Razak, Razli and Ismail, Mohammad and Abu Bakar, Nur Azaliah and Md. Fadzil, Ahmad Firdause and Baker, Rogis (2020) Performance and key factors of cloud computing implementation in the public sector. International Journal of Business and Society, 21 (1). pp. 134-152. ISSN 1511-6670

Sallehudin, Hasimi and Mohd. Satar, Nurhizam Safie and Abu Bakar, Nur Azaliah and Baker, Rogis and Yahya, Farashazillah and Md. Fadzil, Ahmad Firdause (2019) Modelling the enterprise architecture implementation in the public sector using HOT-Fit framework. International Journal of Advanced Computer Science and Applications, 10 (8). pp. 191-198. ISSN 2158-107X

Salman, S. A. and Shahid, S. and Ismail, T. and Chung, E. S. and Al Abadi, A. M. (2017) Long-term trends in daily temperature extremes in Iraq. Atmospheric Research, 198 . pp. 97-107. ISSN 0169-8095

Samad, Sarminah and Nilashi, Mehrbakhsh and Supriyanto, Eko and Tofigh, Somayeh Morshedi and Ghabban, Fahad and Asadi, Shahla and Ali, Rabab and Osman, Reem and Ibrahim, Othman (2021) Factors impacting airport service quality using multi-criteria decision making approach. Journal of Soft Computing and Decision Support Systems (JSCDSS), 8 (2). pp. 1-13. ISSN 2289-8603

Samadi, Masoud and Othman, Mohd. Fauzi and Talib, Muhamad Farihin (2016) Fast and robust stereo matching algorithm for obstacle detection in robotic vision systems. Jurnal Teknologi, 78 (6-13). pp. 129-136. ISSN 0127-9696

Samadianfard, S. and Asadi, E. and Jarhan, Salar and Kazemi, Honeyeh and Kheshtgar, Salar and Kisi, O. and Sajjadi, S. and Abdul Manaf, Azizah (2018) Wavelet neural networks and gene expression programming models to predict short-term soil temperature at different depths. Soil & Tillage Research, 175 . pp. 37-50. ISSN 0167-1987

Samavati, Zahra and Samavati, Alireza and Ismail, A. F. and A. Rahman, Mukhlis and Othman, M. H. D. (2018) Intensity modulated silver coated glass optical fiber refractive index sensor. Chinese Optics Letters, 16 (9). pp. 1-6. ISSN 1671-7694

Samion, S. R. L. and Ali, M. S. M. and Abu, A. and Doolan, C. J. and Porteous, R. Z. Y. (2016) Aerodynamic sound from a square cylinder with a downstream wedge. Aerospace Science and Technology, 53 . pp. 85-94.

Samion, Siti Ruhliah Lizarose and Mat Ali, Mohamed Sukri and Abu, Aminudin (2015) Sound from high-Reynolds number flow over bluff bodies. Aircraft Engineering and Aerospace Technology, 87 (6). pp. 551-556. ISSN 1748-8842

Samsudin, Sani Amril and Hassan, Azman and Mokhtar, Munirah and Syed Jamaluddin, Syed Mustafa (2005) Effect of SEBS on the mechanical properties and miscibility of polystyrene rich polystyrene/polypropylene blends. Progress in Rubber, Plastics and Recycling Technology, 21 (4). pp. 261-276.

Samsudin, S. A. and Hasan, R. C. (2017) Assessment of multibeam backscatter texture analysis for seafloor sediment classification. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 42 (4W5). pp. 177-183. ISSN 177-183

Samsudin, Salfarina and Suratman, Robiah and Sapri, Maimunah and Ngadiman, Norshafadila and Majid, Zulkepli and Ariffin, Azman and Azri, Nor Suhaibah and Darwin, Norhadija (2020) The requirements of immovable asset information: a conceptual framework for geoinformation technology. Journal of Critical Reviews, 7 (16). pp. 762-770. ISSN 2394-5125

Samsuri, Ariffin and K. S., Surej and Chandra, M. H. and M. A., Yeoh and B., Suresh (1997) Cement properties effects to steel corrosion rate. Proceedings of Regional Symposium on Chemical Engineering '97, 2 . pp. 575-580.

Samsuri, Ariffin and Shahrudin, Shahrin (1992) Penggunaan bahan bahan tempatan sebagai bahan tambah simen dalam operasi penyimenan telaga minyak dan telaga gas di Malaysia. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 63-70.

Samy, Ganthan Narayana and Hassan, Noor Hafizah and Ishak, Ruzana and Mohd. Azmi, Nurulhuda Firdaus and Bahari, Rokiah and Maarop, Nurazean and Radhakrishnan, Mugilraj (2018) A review of insider threat detection model for government agencies. Open International Journal of Informatics (OIJI), 6 (4). pp. 68-79. ISSN 2289-2370

Samy, Ganthan Narayana and Magalingam, Pritheega and Wong, Doris Hooi Ten and Hassan, Noor Hafizah and Maarop, Nurazean and Awang, Norkhushaini (2018) Risk assessment using big data analytics approach: a review. Open International Journal of Informatics (OIJI), 6 (4). pp. 1-12. ISSN 2289-2370

Samylingam, L. and Anamalai, K. and Kadirgama, K. and Samykano, M. and Ramasamy, D. and Noor, M. M. and Najafi, G. and Rahman, M. M. and Xian, Hong Wei and Che Sidik, Nor Azwadi (2018) Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127 . pp. 173-181. ISSN 0017-9310

Sanagi, M. M. and See, H. H. (2005) High temperature liquid chromatography on a poly(styrene-divinylbenzene) stationary phase. JOURNAL OF LIQUID CHROMATOGRAPHY & RELATED TECHNOLOGIES, 28 . pp. 3065-3076. ISSN 1082-6076

Sandaran @ Chandran, Shanti Chandran and Abdul Rashid, Mohd. Izwan (2022) Teachers’ evaluation of get smart plus 3 textbook used in the Malaysian year 3 classrooms. Sains Humanika, 14 (3-2). pp. 71-80. ISSN 2289-6996

Sanif, M. S. M. and Ali, A. A. and Woon, L. M. and Wah, L. H. and Sheng, D. B. C. and Hashim, A. M. (2017) Transport properties and sensing responses of platinum nanoparticles/graphene structure fabricated by thermal annealing process. Sains Malaysiana, 46 (7). pp. 1119-1124. ISSN 0126-6039

Sapian, Abdul Razak and Ismail, Mohd. Noorizhar and Rashid, Mizanur and Wan Mohd. Rani, Wan Nurul Mardiah (2018) Mosque: A statement of citizenship. Planning Malaysia, 16 (1). pp. 96-104. ISSN 1675-6215

Sapri, Maimunah and Sipan, Ibrahim @ Atan and Abd. Razak, Siti Mariyam and Adi Maimun, Nurul Hana (2022) The elements of asset-based approach in the flood recovery process. Journal Of Tourism, Hospitality And Environment Management, 7 (27). pp. 272-281. ISSN 0128-178X

Sardool, Gurminder and Hamatani, Yoshiteru and Goto, Masafumi and Megat Mohd. Noor, Megat Johari and Utsumi, Motoo and Sugiura, Norio and Ujang, Zaini (2015) Mathematical simulation to up-scale electrolysis for effective suppression of freshwater cyanobacteria. Desalition And Water Treatment, 55 (13). pp. 3713-3724. ISSN 1944-3994

Sarip, Shamsul and Andrew, J. Day (2015) An experimental study on prototype lightweight brake disc for regenerative braking. Jurnal Teknologi, 74 (1). pp. 11-17. ISSN 0127-9696

Sarip, Shamsul and Saidin, Zul Fazlizan and Mad Kaidi, Hazilah and Suhot, Mohamed Azlan (2021) Manual material handling in an automotive testing department using work movement task analysis. International Journal of Advanced Technology and Engineering Exploration, 8 (78). pp. 619-630. ISSN 2394-5443

Saris, N. N. H. and Hamzah, A. and Ambran, S. and Mikami, O. and Ishigure, T. (2020) Performance of europium aluminium doped polymer optical waveguide amplifier. Bulletin of Electrical Engineering and Informatics, 8 (4). ISSN 1343-1350

Saris, N. N. H. and Yoshida, Y. and Horie, T. and Hamzah, A. and Ambran, S. and Mikami, O. and Ishigure, T. and Fukui, T. (2021) Waveguide length and pump power effects on the amplification of europium aluminum doped polymer. Optik, 239 . ISSN 0030-4026

Saris, Nur Najahatul Huda and Hamzah, Azura and Ambran, Sumiaty (2017) Investigation on gain improvement of erbium doped fiber amplifier (EDFA) by using dual pumped double pass scheme. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (1). pp. 11-18. ISSN 2462-1943

Saris, Nur Najahatul Huda and Mikami, Osamu and Hamzah, Azura and Ambran, Sumiaty and Fujikawa, Chiemi (2018) A v-shape optical pin interface for board level optical interconnect. Photonics Letters of Poland, 10 (1). pp. 20-22. ISSN 2080-2242

Sarmidi, Mohamad Roji (1993) Pengenalan teknik-teknik dalam bioteknologi. Buletin FKKKSA, 7 (2). pp. 39-45. ISSN 0128-0740

Sarmidi, Mohamad Roji (1988) Bioteknologi: satu pengenalan. Buletin FKKKSA, 1 (2). pp. 1-8. ISSN 0128-0740

Sarmidi, Mohamad Roji and Lim, Jinny Lay Poh and Ng, Tit Soo (2001) Enantioselective synthesis of (-)-menthyl acetate in a batch stirred tank reactor: effects of fed batch feeding strategy. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 472-476.

Sarmidi, Mohamad Roji and Ling, Lay Pee and Yunos, Khairul Faezah and Munusamy, Mahadevan and Sim, Weng Kee and Chan, Oi Yee (2001) Fabrication of anion exchange membrane: a preliminary study. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 542-547.

Sarmidi, Mohamad Roji and Mat, Hanapi and Ibrahim, Salmah (1989) Penguraian kanji ubikayu mentah oleh kulat aspergillus sp. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 59-72.

Sarmidi, Mohamad Roji and Md Yunos, Khairul Faezah and Ling, Lay Pee (2001) Permselectivity coefficient of anion exchange membranes for electrodialysis of citric acid. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 109-114.

Sarmin, Nor Haniza and Sapiri, Hasimah (2004) Suatu hubungan kumpulan pusat-2 dengan teori kebarangkalian. Jurnal Teknologi (41c). pp. 45-54. ISSN 2180-3722

Saruchi, S. A. and Ariff, M. H. M. and Shapiai, M. I. and Hassan, N. and Wahid, N. and Zakaria, N. J. and Rahman, M. A. A. and Zamzuri, H. (2019) Radial basis function neural network for head roll prediction modelling in a motion sickness study. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1637-1644. ISSN 2502-4752

Saruchi, S. A. and Ariff, M. H. M. and Zamzuri, H. and Hassan, N. and Wahid, N. (2020) Modeling of occupant's head movement behavior in motion sickness study via time delay neural network. Simulation, 96 (2). pp. 131-140. ISSN 0037-5497

Saruchi, S. A. and Ariff, M. H. M. and Zamzuri, H. and Zulkarnain, N. and Che Hasan, M. H. and Fahami, S. M. H. (2019) Robust composite nonlinear feedback for nonlinear steer-by-wire vehicles yaw control. Bulletin of Electrical Engineering and Informatics, 8 (1). pp. 214-222. ISSN 2302-9285

Saruchi, S. A. and Mohammed Ariff, M. H. and Zamzuri, H. and Amer, N. H. and Wahid, N. and Hassan, N. and Abdul Kadir, Z. (2020) Lateral control strategy based on head movement responses for motion sickness mitigation in autonomous vehicle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (5). ISSN 1678-5878

Scholtz, B. and Mahmud, I. and Mahmud, I. and Ramayah, T. (2016) Does usability matter? An analysis of the impact of usability on technology acceptance in ERP settings. Interdisciplinary Journal of Information, Knowledge, and Management, 11 . pp. 309-330. ISSN 1555-1229

Sean, Nor Arbani and Leaw, Wai Loon and Abouzari-lotf, Ebrahim and Nur, Hadi (2021) Magnetic field-induced alignment of polybenzimidazole microstructures to enhance proton conduction. Journal of the Chinese Chemical Society, 68 (1). pp. 86-94. ISSN 0009-4536

See, C. L. and Ismail, S. and Fathi, M. S. and Haron, H. S. and Shariff, S. A. (2019) Stakeholders' role in ensuring success of entrepreneurship education in engineering curriculum in Malaysia. Test Engineering and Management, 81 (11-12). pp. 903-914. ISSN 0193-4120

See, Yuen Chark and Mohd. Noor, Norliza (2019) Integrating complete gabor filter to the random forest classification algorithm for face recognition. Journal of Engineering Science and Technology, 14 (2). pp. 859-874. ISSN 1823-4690

Seeni Mohd., Mohd. Ibrahim and Hashim, Mazlan (1997) Undergraduate and postgraduate programmes in remote sensing at University Technology Malaysia. Proceedings of Asian Conference on Remote Sensing 1997 .

Sekharan, Gopal and Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Abu Bakar, Zailis (2005) Optimization Of Solder Paste Printing Parameters Using Design Of Experiments (DOE). Jurnal Teknologi A (43A). pp. 11-20. ISSN 0127-9696

Selamat, Nur Aisyah and Md. Ali, Abd. Halim and Mohd. Yusof, Mohd. Rashid and Che Jusoh, Nurfatehah Wahyuny and Jamian, Nor Ruwaida and Mohd. Pa'ad, Khairunnisa (2020) Development of carbon dioxide adsorbents from renewable and non-renewable sources: A review. Malaysian Journal of Fundamental and Applied Sciences, 16 (5). pp. 544-556. ISSN 2289-599X

Selvam, S. B. and Chelliapan, S. and Din, M. F. M. and Nasri, N. S. and Abdullah, N. and Yuzir, A. (2017) Performance of an up-flow anaerobic sludge bed (UASB) reactor for treating landfill leachate containing heavy metals and formaldehyde. Desalination and Water Treatment, 86 . pp. 51-58. ISSN 1944-3994

Sena, Boni and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Rijal, Hom Bahadur and Ardila-Rey, Jorge Alfredo and Md. Yusoff, Nelidya and Yakub, Fitri and Ridwan, Mohammad Kholid and Muhammad Sukki, Firdaus (2021) Determinant factors of electricity consumption for a Malaysian household based on a field survey. Sustainability (Switzerland), 13 (2). p. 131. ISSN 2071-1050

Ses, Shahrum and Mohamed, Azhari (2009) The second precise levelling network of Peninsular Malaysia. Survey Review , 41 (314). pp. 384-394. ISSN 0039-6265

Setiawan Putra, A. W. and Makinoshima, K. and Yamada, M. and Takashima, T. and Ambran, S. (2016) Investigation of frequency noise and spectrum linewidth in semiconductor optical amplifier. Jurnal Teknologi, 78 (3). pp. 155-165. ISSN 0127-9696

Setiawan Putra, Alexander William and Yamada, Minoru and Ambran, Sumiaty and Maruyama, Takeo (2018) Theoretical comparison of noise characteristics in semiconductor and fiber optical amplifiers. IEEE Photonics Technology Letters, 30 (8). pp. 756-759. ISSN 1041-1135

Seyed Ahmad Soleymani, Seyed Ahmad Soleymani and Goudarzi, Shidrokh and Anisi, Mohammad Hossein and Movahedi, Zeinab and Jindal, Anish and Kama, Nazri (2022) PACMAN: Privacy-preserving authentication scheme for managing cybertwin-based 6G networking. IEEE Transactions on Industrial Informatics, 18 (7). pp. 4902-4911. ISSN 1551-3203

Shabanzadeh, P. and Yusof, R. and Shameli, K. and Khanehzaei, H. (2016) Simulation and modeling of synthesis Cu nanoparticles in sodium alginate media by means of expert systems. Research on Chemical Intermediates, 42 (4). pp. 2831-2843. ISSN 0922-6168

Shabanzadeh, Parvaneh and Yusof, Rubiyah and Shameli, Kamyar (2015) Modeling of biosynthesized silver nanoparticles in Vitex negundo L. extract by artificial neural network. RSC Advances, 5 (106). pp. 87277-87285. ISSN 2046-2069

Shabdin, M. K. and Zainudin, A. A. and Mazlan, S. A. and Abdul Rahman, M. A. and Abdul Aziz, S. A. and Bahiuddin, I. and Choi, S. B. (2020) Tunable low range gr induced magnetorheological elastomer with magnetically conductive feedback. Smart Materials and Structures, 29 (5). ISSN 0964-1726

Shabdin, N. H. and Padfield, R. (2017) Sustainable energy transition, gender & modernisation in rural Sarawak. Chemical Engineering Transactions, 56 . pp. 259-264. ISSN 2283-9216

Shabdin, N. H. and Tamunaidu, P. and Rambat, S. and Mansor, M. R. (2019) Greenhouse gas emissions trend in old landfill, Malaysia. Chemical Engineering Transactions, 72 . pp. 211-216. ISSN 2283-9216

Shabri, Ani and Jemain, Abdul Aziz (2009) Pengujian kesahihan pemadanan untuk taburan nilai ekstrim jenis I. Matematika, 25 (1). pp. 53-66. ISSN 0127-8274

Shafie, S. and Shihab, H. S. and Ahmad, F. and Ramli, A. R. (2017) Zero-padding in DWT satellite image compression. Pertanika Journal of Science and Technology, 25 (S). pp. 205-214. ISSN 0128-7680

Shah, Jalal and Kama, Nazri and A. Bakar, Nur Azaliah and Bhutto, Zuhaibuddin and Khan, Sohrab (2019) Software requirement change effort estimation model prototype tool for software development phase. International Journal of Software Engineering & Applications (IJSEA), 10 (3). ISSN 0976-2221

Shah, S. A. R. and Jamaludin, K. R. and Talib, H. H. A. and Yusof, H. M. (2019) Integrated quality environmental management implementation in food processing smes: a case study of a developing country. TQM Journal, 31 (5). pp. 740-757. ISSN 1754-2731

Shaharuddin, N. H. and Ali, M. S. M. and Mansor, S. and Muhamad, S. and Shaikh Salim, Sheikh Ahmad Zaki and Usman, M. (2017) Flow simulations of generic vehicle model SAE type 4 and DrivAer Fastback using OpenFOAM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 37 (1). pp. 18-31. ISSN 2289-7879

Shahbazi, Milad and Mohd. Zainuddin, Norziha Megat and Yusoff, Rasimah and Wong, Doris Hooi Ten and Wan Hassan, Wan Azlan (2021) Design principle for public transportation infographic. International Journal of Innovative Computing, 11 (1). pp. 45-52. ISSN 2180-4370

Shahemi, N. H. and Liza, S. and Sawae, Y. and Morita, T. and Fukuda, K. and Yaakob, Y. (2021) The relations between wear behavior and basic material properties of graphene-based materials reinforced ultrahigh molecular weight polyethylene. Polymers for Advanced Technologies, 32 (11). ISSN 1042-7147

Shahrin, R. and Quoquab, F. and Jamil, R. and Mahadi, N. and Mohammad, J. and Salam, Z. and Hussin, N. (2017) Green “eco-label” or “greenwashing”? building awareness about environmental claims of marketers. Advanced Science Letters, 23 (4). pp. 3205-3208. ISSN 1936-6612

Shahroni, Nuraini and Minghat, Asnul Dahar and Mustakim, Siti Salina (2022) Competency index of Technical Vocational Education and Training (TVET) instructors for 4.0 industrial revolution. ASEAN Journal of Educational Research and Technology, 1 (2). pp. 155-162. ISSN 2775-6793

Shahroni, Nuraini and Minghat, Asnul Dahar and Mustakim, Siti Salina (2022) Methodology for investigating competency index of Technical Vocational Education and Training (TVET) instructors for 4.0 industrial revolution. ASEAN Journal for Science Education, 1 (1). pp. 49-62. ISSN 2828-3287

Shahrudin, Shahrin and Samsuri , Ariffin and Suhaimi, Ahmad and Nasir, Abu Samah and Ahmad, Zainuddin (1994) The effect of adding palm oil fly ash to the development of strength on oilwell cement. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Shahrudin, Shahrin and Samsuri, Ariffin and Ismail, Abdul Razak and Junin, Radzuan and Hashim, Ayob (1992) Preliminary studies of the possibility of using local cement in oil and gas wells cementing operations in Malaysia. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-5.

Shahrudin, Shahrin and Samsuri, Ariffin and Suhaimi, Ahmad and Nasir, Abu Samah and Ahmad, Zainuddin (1994) Possibility studies of using local cement in oil and gas wells cementing operation in Malaysia - part III. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Shajahan, Mohamed and Mohd. Aris, Siti Armiza and Usman, Sahnius and Mohd. Noor, Norliza (2022) Denoising of impulse noise using partition-supported median, interpolation and DWT in dental X-ray images. International Journal of Advanced Computer Science and Applications, 13 (9). pp. 274-280. ISSN 2158-107X

Shammugam, Inthrani and Samy, Ganthan Narayana and Magalingam, Pritheega and Maarop, Nurazean and Perumal, Sundresan and Shanmugam, Bharanidharan (2021) Information security threats encountered by Malaysian public sector data centers. Indonesian Journal of Electrical Engineering and Computer Science, 21 (3). pp. 1820-1829. ISSN 2502-4752

Shamshirband, Shahaboddin and Mohammadi, Kasra and Chen, Hui Ling and Narayana Samy, Ganthan and Petkovic, Dalibor and Ma, Chao (2015) Daily global solar radiation prediction from air temperatures using kernel extreme learning machine: a case study for Iran. Journal of Atmospheric and Solar-Terrestrial Physics, 134 . pp. 109-117. ISSN 1364-6826

Shamsudin, N. H. and Shafie, S. and Ab. Kadir, M. Z. A. and Ahmad, F. and Sadrolhosseini, A. R. and Sulaiman, Y. and Chachuli, S. A. M. (2020) Power conversion efficiency (PCE) performance of backilluminated DSSCs with different Pt catalyst contents at the optimized TiO2 thickness. Optik, 203 .

Shapiai, M. I. and Ibrahim, Z. and Adam, A. (2017) Pareto optimality concept for incorporating prior knowledge for system identification problem with insufficient samples. Arabian Journal for Science and Engineering, 42 (7). pp. 2697-2710. ISSN 1319-8025

Sharif, N. M. and Yusoff, N. M. and Mohd. Izhar, M. A. and Ahmad, F. and Harun, S. W. and Ahmad, H. (2016) Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers. Jurnal Teknologi, 78 (5-9). pp. 97-103. ISSN 0127-9696

Sharif, N. M. and Yusoff, N. M. and Salim, S. A. Z. S. and Mahdi, M. A. (2017) Thulium-doped fiber amplifier at near 2000 nm with different pumping scheme. Advanced Science Letters, 23 (6). pp. 5260-5263. ISSN 1936-6612

Sharifah Munawwarah, Sharifah Munawwarah and Yakub, Fitri (2021) Control analysis of vehicle ride comfort through integrated control devices on the quarter and half car active suspension systems. Journal of Automobile Engineering, 235 (5). pp. 1256-1268. ISSN 0954-4070

Sharifmuddin, N. B. and Suwa, T. and Shaikh Salim, S. A. Z. (2016) Concept study of microgrid dispatch strategy for solar thermal power plant with thermal storage. Jurnal Teknologi, 78 (5-8). pp. 85-90. ISSN 0127-9696

Sharma, Jyoti and Pant, Gaurav and Hossain, Kaizar and Ahmad, Akil and Bakht, Md. Afroz and Alka, Alka and Tripathi, Rashmi and Mohd. Setapar, Siti Hamidah (2022) Chromium toxicity in the Yamuna River ecosystem at Brij Region – Uttar Pradesh, India. Desalination and Water Treatment, 267 (NA). pp. 13-25. ISSN 1944-3994

Sharma, K. K. and Seal, A. and Yazidi, A. and Selamat, A. and Krejcar, O. (2021) Clustering uncertain data objects using jeffreys-divergence and maximum bipartite matching based similarity measure. IEEE Access, 9 . ISSN 2169-3536

Shayea, Ibraheem and Alhammadi, Abdulraqeb and El-Saleh, Ayman A. and Hassan, Wan Haslina and Mohamad, Hafizal and Ergen, Mustafa (2022) Time series forecasting model of future spectrum demands for mobile broadband networks in Malaysia, Turkey, and Oman. Alexandria Engineering Journal, 61 (10). pp. 8051-8067. ISSN 1110-0168

Shayea, Ibraheem and Ergen, Mustafa and Azizan, Azizul and Ismail, Mahamod and Daradkeh, Yousef Ibrahim (2020) Individualistic dynamic handover parameter self-optimization algorithm for 5G networks based on automatic weight function. IEEE Access, 8 . pp. 214392-214412. ISSN 2169-3536

Shayea, Ibraheem and Ismail, Mahamod and Nordin, Rosdiadee and Ergen, Mustafa and Ahmad, Norulhusna and Abdullah, Nor Fadzilah and Alhammadi, Abdulraqeb and Mohamad, Hafizal (2019) New weight function for adapting handover margin level over contiguous carrier aggregation deployment scenarios in LTE-advanced system. Wireless Personal Communications, 108 (2). pp. 1179-1199. ISSN 0929-6212

Sha’arani, S. and Hara, H. and Araie, H. and Suzuki, I. and Noor, M. J. M. M. and Akhir, F. N. M. D. and Othman, N. and Zakaria, Z. (2020) Whole gene transcriptomic analysis of pcb/ biphenyl degrading rhodococcus jostii rha1. Journal of General and Applied Microbiology, 65 (4). pp. 173-179. ISSN 0022-1260

Sha’rani, Saidatul Sophia and Lotf, Ebrahim Abouzari and Ahmad, Arshad and Wan Ibrahim, Wan Atika and El-sayed Nasef, Mohamed Mahmoud and Ali, Roshafima Rasit (2016) Stability and performance evaluation of ion-exchange membranes for vanadium redox flow battery. Jurnal Teknologi, 78 (12). pp. 7-12. ISSN 0127-9696

Shehu, Isma’ila Y. and Enemali, Joseph D. and Muhammad, Muhammad H. and Nordin, Mohd. Safarin (2012) Development and validation of automobile technology learning environment inventory in tertiary institutions of Nigeria. International Journal of Mathematics, Engineering and Technology, 2 . pp. 15-37. ISSN 2244-1603 (Electronic) ; 2244-159X (Print)

Shihab, H. S. and Shafie, S. and Ramli, A. R. and Ahmad, F. (2017) Enhancement of Satellite Image Compression Using a Hybrid (DWT–DCT) Algorithm. Sensing and Imaging, 18 (1). ISSN 1557-2064

Shudirman, S. and Kassim, A. A. and Anuar, N. S. S. and Utsumi, M. and Shimizu, K. and Yuzir, M. A. M. and Noor, M. J. M. N. and Akhir, F. N. M. (2021) Limitation of nutrients stimulates musty odor production by streptomyces sp. Isolated from a tropical environment. Journal of General and Applied Microbiology, 67 (3). ISSN 0022-1260

Shukor, D. Shakirah and Abu, Aminudin and Aziz Wong, Azella and Hashim, U. Alyaa and Waziralilah, N. Fathiah and Vikneshvaran, T. (2017) Active noise cancellation in the rectangular enclosure systems. International Journal of Mechanical And Production Engineering, 5 (5). pp. 71-75. ISSN 2320-2092

Shukri, S. M. and Wahab, M. H. (2019) The origin of the malay royal town concept of urban form. Test Engineering and Management, 81 . pp. 1004-1013. ISSN 0193-4120

Shukri, S. M. and Wahab, M. H. and Amat, R. C. and Taib, I. and Ismail, S. (2018) The morphology of early towns in Malay Peninsula. International Journal of Engineering and Technology(UAE), 7 (3.9). pp. 77-80. ISSN 2227-524X

Shukri, S. M. and Wahab, M. H. and Amat, R. C. and Taib, I. and Rozaly, M. Z. M. (2018) Definition and physical attributes that characterise settings of Malay Royal towns in Malaysia. International Journal of Engineering and Technology(UAE), 7 (3.9). pp. 55-58. ISSN 2227-524X

Shukri, Sharyzee Mohmad and Wahab, Mohammad Hussaini and Awaluddin, Z. L. and Aminuddin, A. M. R. and Hasan, Muhammad Ismail (2022) The role of attachment in creating sustainable sense of place for traditional streets in Alor Setar, Malaysia. Journal of Design and Built Environment, 22 (1). pp. 55-71. ISSN 1823-4208

Sia, Toh Ching and Velautham, Sanjayan and Nordin, Amer (2007) Exergetic optimization of a flat plate solar collector design. International Energy Journal, 8 (2). pp. 125-130. ISSN 1513-718X

Sidik, N. A. C. and Yazid, M. N. A. W. M. and Samion, S. (2017) A review on the use of carbon nanotubes nanofluid for energy harvesting system. International Journal of Heat and Mass Transfer, 111 . pp. 782-794. ISSN 0017-9310

Sing, C. K. L. and Ken, T. L. and Yee, L. K. and Kamadinata, J. O. and Sidik, N. A. C. and Asako, Y. and Quen, L. K. (2018) Solar radiation forecast using cloud velocity for photovoltaic systems. Journal of Engineering and Technological Sciences, 50 (4). pp. 479-492. ISSN 2337-5779

Sing, C. K. L. and Lim, J. S. and Walmsley, T. G. and Liew, P. Y. and Goto, M. and Shaikh Salim, S. A. Z. B. (2020) Time-dependent integration of solar thermal technology in industrial processes. Sustainability (Switzerland), 12 (6). ISSN 2071-1050

Singh, J. S. K. and Mahmood, N. H. N. and Othman, Z. (2019) Emotional intelligence, social competencies and cultural adjustment of expatriates in Malaysia: the mediating role of self-motivation. International Journal of Engineering and Advanced Technology, 8 (5). pp. 617-627. ISSN 2249-8958

Singh, Jogendra and Kumar, Vinod and Kumar, Pankaj and Kumar, Piyush and Yadav, Krishna Kumar and Cabral-Pinto, Marina M. S. and Kamyab, Hesam and Chelliapan, Shreeshivadasan (2021) An experimental investigation on phytoremediation performance of water lettuce (Pistia stratiotes L.) for pollutants removal from paper mill effluent. Water Environment Research, 93 (9). pp. 1543-1553. ISSN 1061-4303

Sinnasamy, Thilageswari and Amir Sjaif, Nilam Nur (2022) Sentiment analysis using term based method for customers’ reviews in amazon product. International Journal of Advanced Computer Science and Applications, 13 (7). pp. 685-691. ISSN 2158-107X

Sinnasamy, Thilageswari and Shajahan, Mohamed and Mohd. Aris, Siti Armiza and Usman, Sahnius and Mohd. Noor, Norliza (2022) Denoising of impulse noise using partition- supported median, interpolation and dwt in dental x-ray images. International Journal of Advanced Computer Science and Applications, 13 (9). pp. 274-280. ISSN 2158-107X

Siti Amni Husna, Roslan and Hassan, Mohamad Zaki and A. Rasid, Zainudin and Ibrahim, Haziq Izzuddin (2018) Tensile behaviour of chemical treatment for bamboo epoxy composites. Chemical Engineering Transactions, 63 . pp. 745-750. ISSN 2283-9216

Siti Rochimah, Siti Rochimah and Wan Kadir, Wan W. N. and Abdullah, Abdul H. (2007) Multifaceted approached in gerating and recovering requirement traceability. Jurnal Teknologi Maklumat, 19 (2). pp. 67-84. ISSN 0128-3790

Sivarama Krishna, L. and Soontarapa, K. and Yuzir, A. and Kumar, V. A. and Zuhairi, W. Y. W. (2017) Kaolin-nano scale zero-valent iron composite(K-nzvi): Synthesis, characterization and application for heavy metal removal. Desalination and Water Treatment, 100 . pp. 168-177. ISSN 1944-3994

Sjarif, N. N. A. and Yahya, Y. and Chuprat, S. and Azmi, N. H. F. M. (2020) Support vector machine algorithm for sms spam classification in the telecommunication industry. International Journal on Advanced Science, Engineering and Information Technology, 10 (2). pp. 635-639. ISSN 2088-5334

Sjarif, N. N. A. and Yusof, M. R. M. and Wong, D. H. T. and Ya'akob, S. and Ibrahim, R. and Osman, M. Z. (2019) A customer churn prediction using pearson correlation function and k nearest neighbor algorithm for telecommunication industry. International Journal of Advances in Soft Computing and its Applications, 11 (2). pp. 46-59. ISSN 2074-8523

Slamet, Slamet and Abd. Ghani, Rasli and Kobayashi, Fuminori (2018) A new approach to maximum power point tracking for sudden changes in irradiance in photovoltaic systems. Indian Journal of Science and Technology, 11 (16). pp. 1-8. ISSN 0974-6846

Sofian, H. and Ming, J. T. C. and Muhammad, S. and Noor, N. M. (2019) Calcification detection using convolutional neural network architectures in intravascular ultrasound images. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). ISSN 2502-4752

Sofian, Hannah and Chia, Joel Ming Than and Mohamad, Suraya and Mohd. Noor, Norliza (2021) Calcification detection for intravascular ultrasound image using direct acyclic graph architecture: pre-trained model for 1-channel image. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 787-794. ISSN 2502-4752

Sohaei, H. and Namazi, E. and Hajihassani, M. and Marto, A. (2020) A review on tunnel-pile interaction applied by physical modeling. Geotechnical and Geological Engineering, 38 (4). pp. 3341-3362. ISSN 0960-3182

Soleymani, Seyed Ahmad and Goudarzi, Shidrokh and Kama, Nazri and Ismail, Saiful Adli and Ali, Mazlan and Zainal, Zaini M.D. and Zareei, Mahdi (2020) A hybrid prediction model for energy-efficient data collection in wireless sensor networks. Symmetry, 12 (12). pp. 1-16. ISSN 2078994

Somchit, N. and Ismail, S. and Fathi, M. S. and Aziz, S. A. (2020) Integration of ISO 45001 and project management institute's project management body of knowledge in construction project management. Test Engineering and Management, 82 (1-2). pp. 2079-2086. ISSN 0193-4120

Songip, Ahmad Rahman (1989) Pembentukan jurutera kimia yang mahir dan bertanggungjawab di UTM. Buletin FKKKSA, 3 (2). pp. 1-5. ISSN 0128-0740

Songip, Ahmad Rahman and Ahmad, Khairudin (1987) Overview on industrial major accident hazards control. Buletin FKKKSA, 1 (1). pp. 51-61. ISSN 0128-0740

Songip, Ahmad Rahman and Akiyama, Takashi and Masuda, Takao and Hashimoto, Kenji (1995) A new approach in deactivation analysis: effects of coke loading on diffusivity and acidic properties. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B13-1.

Songip, Ahmad Rahman and Meor Sulaiman, Meor Yusof (1989) The digestion of thorium cake in nitric acid. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 470-478.

Songip, Ahmad Rahman and Nasri, N. S. and Jungan, J. (2004) Autothermal reforming of methane to hydrogen in a palladium membrane reactor: characterization of bimetallic Pt-NiO/delta-Al2O3 catalyst. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-40.

Songip, Ahmad Rahman and Nasri, N. S. and Tutuk, D. K. and Ismail, S. R. (2004) Characterization of CoNI-Sn catalyst for autothermal reforming methane. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-236.

Soo, Jillin Ai Lam and Makhtar, Muaz Mohd. Zaini and Shoparwe, Noor Fazliani and Otitoju, Tunmise Ayode and Mohamad, Mardawani and Tan, Lian See and Li, Sanxi (2021) Characterization and kinetic studies of poly(Vinylidene fluoride-co-hexafluoropropylene) polymer inclusion membrane for the malachite green extraction. Membranes, 11 (9). pp. 1-23. ISSN 2077-0375

Soon, Eu Hui and Abdul Manaf, Nur’azah and Mahrin, Mohd. Naz'ri (2022) Utilizing interactive vector graphics to enhance user experience in engaging with complex user interface design. ASEAN Engineering Journal, 12 (4). pp. 1-7. ISSN 2586-9159

Stoddart, Christopher and Muhammad Sukki, Firdaus and Anderson, Mark and Ardila-Rey, Jorge Alfredo and Ayub, Ahmad Syahrir and Mohd. Sahabuddin, Mohd. Firrdhaus and Rahmat, Mohd. Khairil and Muhtazaruddin, Mohd. Nabil and Muhammad Zulkipli, Muhammad Zulkipli (2022) A study of zero bid wind farm for future Scotland’s energy demands—A new approach. Applied Sciences (Switzerland), 12 (7). pp. 1-20. ISSN 2076-3417

Subari, Mustafa Din and Hassan, Azmi (2014) Building EOS capabilities for Malaysia - the options. Malaysian Journal of Remote Sensing & Gis, 3 (2). pp. 46-53. ISSN 1511-7049

Subari, Mustafa Din (1997) GPS for Amateur Astronomer: How Wrong Can You Be? Buletin Geoinformasi, 2 (1). pp. 83-88. ISSN 1394-7702

Subari, Mustafa Din (1996) Mixing Low-Cost GPS Receiver With Standard Surveying Receiver. Buletin Ukur, 7 (3). pp. 149-156. ISSN 0128-4274

Suboh, Siti Fatimah and Mohd. Setapar, Siti Hamidah and Alshammari, Mohammed B. and Ahmad, Akil (2022) Utilization of Trametes versicolor for the production of laccase and its application in oxytetracycline degradation from wastewater. Desalination and Water Treatment, 266 (NA). pp. 284-290. ISSN 1944-3994

Subramaniam, C. and Ismail, S. and Durdyev, S. and Wan Mohd Rani, W. N. M. and Abu Bakar, N. F. S. and Banaitis, A. (2021) Overcoming the project communications management breakdown amongst foreign workers during the covid-19 pandemic in biophilia inveigled construction projects in Malaysia. Energies, 14 (16). ISSN 1996-1073

Subramaniam, C. and Ismail, S. and Mohd. Arof, K. Z. and Najib, N. H. and Saleh, A. L. (2020) Causative failure factors of communications management in mixed-use development projects in Malaysia. Journal of Critical Reviews, 7 (5). pp. 82-86. ISSN 2394-5125

Subramaniam, Chitdrakantan and Ismail, Syuhaida and Wan Mohd. Rani, Wan Nurul Mardiah and Mahdiyar, Amir (2022) Improving project communications management practices in the construction sector during the COVID-19 pandemic: A Malaysian scenario. Buildings, 12 (9). pp. 1-20. ISSN 2075-5309

Subramaniam, Yogeeswari and Loganathan, Nanthakumar (2022) Uncertainty and technological innovation: evidence from developed and developing countries. Economic Change and Restructuring, 55 (4). pp. 2527-2545. ISSN 1573-9414

Sudirman, Rubita and Salleh, Sh. Hussain and Khalid, Puspa Inayat and Ahmad, Abd. Hamid (2005) Time normalization of LPC feature using warping method. Elektrika, 7 (2). pp. 29-35. ISSN 0128-4428

Sugeng, D. A. and Ithnin, A. M. and Yahya, W. J. and Abd. Kadir, H. (2020) Emulsifier-free water-in-biodiesel emulsion fuel via steam emulsification: its physical properties, combustion performance, and exhaust emission. Energies, 13 (20). ISSN 1996-1073

Sugeng, D. A. and Yahya, W. J. and Ithnin, A. M. and Kusdi, B. H. and Rashid, M. A. A. and Bahiuddin, I. and Mazlan, N. A. and Kadir, H. A. (2020) Experimental comparison of smoke opacity and particulate matter emissions with the use of emulsion fuel. Evergreen, 7 (3). 452- 457. ISSN 2189-0420

Sugeng, Dhani Avianto and Ithnin, Ahmad Muhsin and Mohd. Syahril Amri, Nur Salsabilla and Ahmad, Mohamad Azrin and Yahya, Wira Jazair (2018) Water content determination of steam generated water-in-diesel emulsion. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (1). pp. 62-68. ISSN 2289-7879

Sugeng, Dhani Avianto and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Abdul Rashid, Muhammad Adib and Mohd. Syahril Amri, Nur Salsabilla and Abd. Kadir, Hasannuddin and Abdul Halim, Mohd. Naim (2018) Diesel engine emission analysis using fuel from diverse emulsification methods. Environmental Science and Pollution Research, 25 (27). pp. 27214-27224. ISSN 0944-1344

Sugihara, Okihiro and Tan, Freddy Susanto and Fujikawa, Chiemi and Mikami, Osamu (2017) Next generation optical interconnection using photonics polymers: Progress of light-induced self-written waveguide. Journal of The Japan Institute of Electronics Packaging, 20 (5). pp. 341-344. ISSN 1343-9677

Sugiyarti, Eka and Jasmi, Kamarul Azmi and Basiron, Bushrah and Huda, Miftachul and Shankar, K. and Maseleno, Andino (2018) Decision Support System of Scholarship Grantee Selection Using Data Mining. International Journal of Pure and Applied Mathematics, 119 (15). pp. 2239-2249. ISSN 1314-3395

Suhairy, Mohd. Shazni and Mohamed, Norliza and Ahmad, Norulhusna and Mad Kaidi, Hazilah and Dziyauddin, Rudzidatul Akmam and Mohd. Sam, Suriani (2022) Emotional intelligence impacts on work performance: the case in telecommunication Malaysia research company. International Journal of Innovation and Technology Management, 19 (3). n/a. ISSN 0219-8770

Suhot, M. A. and Hassan, M. Z. and Abdul Aziz, S. and Md. Daud, M. Y. (2021) Recent progress of rice husk reinforced polymer composites: a review. Polymers, 13 (15). ISSN 2073-4360

Sulaiman, Hanizam (1993) Reogram untuk polietilena berat molekul tertinggi dari indeks pengaliran leburan. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-2.

Sulaiman, A. H. and Md. Yusoff, N. and Cholan, N. A. and Mahdi, M. A. (2018) Multiwavelength fiber laser based on bidirectional lyot filter in conjunction with intensity dependent loss mechanism. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 840-846. ISSN 2502-4752

Sulaiman, Abdul Hadi and Abdul Kadir, Muhammad Zamzuri and Md. Yusoff, Nelidya and Cholan, Noran Azizan and Abdullah, Fairuz and Abas, Ahmad Fauzi and Alresheedi, Mohammed Thamer and Mahdi, Mohd. Adzir (2018) Broad bandwidth SOA-based multiwavelength laser incorporating a bidirectional Lyot filter. Chinese Optics Letters, 16 (9). pp. 1-5. ISSN 1671-7694

Sulaiman, Abdul Hadi and Md. Yusoff, Nelidya and Abdul Kadir, Muhammad Zamzuri and Abdullah, Fairuz and Cholan, Noran Azizan and Mustapha Kamil, Yasmin and Mahdi, Mohd. Adzir (2021) Investigation on factors influencing flatness of a bidirectional SOA-based multiwavelength fiber laser. Infrared Physics and Technology, 112 . p. 103593. ISSN 1350-4495

Sulaiman, Mohd Ariff and Abu Bakar, Nur Azaliah and Mohd Anuar, Mohd Syahid and Sallehudin, Hasimi (2019) Systematic review on ethical issues in cloud computing. Open International Journal of Informatics, 7 (2). pp. 65-74. ISSN 2289-2370

Sulaiman, Siti Zubaidah and Kasmani, Rafiziana Md. M. and Mustafa, Azeman (2015) Experimental study on the effect of curved tube of premixed hydrogen-air explosion. Journal of Engineering Science and Technology, 10 (5). pp. 50-60. ISSN 18234690

Sulaiman, Hanizam (1992) Polietilena berberat molekul tertinggi: ciri dan pemprosesan sebuah kajian awal. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Sulong, Ghazali and Mohammedali, Ammar (2015) Recognition of human activities from still image using novel classifier. Journal of Theoretical and Applied Information Technology, 71 (1). pp. 115-121. ISSN 1992-8645

Sulong, Norizan and Othman, Nooraini (2020) A phenomenological study on international student withdrawals from Malaysian higher education institutions. International Journal of Academic Research in Business & Social Sciences, 10 (12). pp. 363-376. ISSN 2222-6990

Sulong, Mohamad and Abdul Aziz, Mustafa Kamal (1989) Crude palm oil clarification by three phase decanting centrifuge, steady and dynamic state modeling. Proceedings of The Fifth Symposium of Malaysian Chemical Engineers . pp. 504-516.

Suparman, Suparman and Toifur, Mohammad and Minghat, Asnul Dahar and Hikamudin, Eviana and Rusiman, Mohd. Saifullah (2022) Bayesian detection of signal under Rayleigh multiplicative noise based on reversible jump MCMC. International Journal of GEOMATE, 22 (89). pp. 24-31. ISSN 2186-2982

Suppramaniam, S. Umeesh Kumar and Ismail, Syuhaida and Suppramaniam, Subaashnii (2018) Causes of delay in the construction phase of oil and gas projects in Malaysia. International Journal of Engineering and Technology(UAE), 7 (2). pp. 203-209. ISSN 2227-524X

Suratman, F. and Huyop, Fahrul Zaman and Wagiran, A. and Rahmat, Z. and Ghazali, H. and Parveez, G. K. A. (2010) Cotyledon with hypocotyl segment as an explant for the production of transgenic citrullus vulgaris schrad (watermelon) mediated by agrobacterium tumefaciens. Biotechnology, 9 (2). 106 - 118. ISSN 1682 - 296X

Suratman, Robiah and Ahli, Norziana (2022) The importance of City Biodiversity Index (CBI) indicators for Malaysia future biodiversity management at local level: a review. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 50-57. ISSN 0128-178X

Suresh, Sangeeth and Aung, Lwin Moe and Abu, Aminudin (2015) Defects reduction in manufacturing of automobile piston ring using six sigma. Journal Of Industrial And Intelligent Information, 3 (1). pp. 32-38. ISSN 2301-3745

Surib, N. A. and Fatihah, M. and NorRuwaida, J. and Rashid, M. and Khairunnisa, M. P. and Lenggoro, I. W. (2019) Shinyei based sensor with added roof enhanced detection of indoor particulate matter. International Journal of Integrated Engineering, 11 (7). ISSN 2229-838X

Suriyanti, S. N. P. and Usup, G. (2017) Morphology and molecular phylogeny of the marine diatom nitzschia dentatum sp. nov and N. Johorensis sp. nov ( bacillariophyceae) from Malaysia. Bangladesh Journal of Plant Taxonomy, 24 (2). pp. 183-196. ISSN 1028-2092

Suriyanti, S. N. P. and Usup, G. (2017) Morphology and molecular phylogeny of the marine diatom Nitzschia dentatum sp. nov. and N. Johorensis sp. nov. (Bacillariophyceae) from Malaysia. Bangladesh Journal of Plant Taxonomy, 24 (2). pp. 183-196. ISSN 1028-2092

Susilowati, Tri and Jasmi, Kamarul Azmi and Basiron, Busrah and Huda, Miftachul and Shankar, K. and Maseleno, Andino and Julia, Anis and Sucipto, Sucipto (2018) Determination of Scholarship Recipients Using Simple Additive Weighting Method. International Journal of Pure and Applied Mathematics, 119 (15). pp. 2231-2238. ISSN 1314-3395

Suwa, T. and Heng, S. Y. (2016) Transient thermal performance prediction method for parabolic trough solar collector under fluctuating solar radiation. Jurnal Teknologi, 78 (5-9). pp. 47-52. ISSN 0127-9696

Swarno, H. A. and Zaki, S. A. and Yusup, Y. and Ali, M. S. M. and Ahmad, N. H. (2017) Observation of diurnal variation of urban microclimate in Kuala Lumpur, Malaysia. Chemical Engineering Transactions, 56 . pp. 523-528. ISSN 2283-9216

Swarno, Husna Aini and Mohamad, Ahmad Faiz and Ahmad, Nurul Huda and Ismail, Syuhaida and Che Amat, Rohayah and Wahab, Mohammad Hussaini and Wan Mohd. Rani, Wan Nurul Mardhiah (2020) Preliminary study on the wind flow simulation over a biophilic city. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (1). pp. 172-179. ISSN 2289-7879

Syafrina, A. H. and Mohd. Daud, Zalina and Juneng, Liew (2015) Historical trend of hourly extreme rainfall in Peninsular Malaysia. Theoretical and Applied Climatology, 120 (1-2). pp. 259-285. ISSN 0177-798X

Syafrina, A. H. and Norzaida, A. and Shazwani, O. Noor (2017) Rainfall analysis in the northern region of Peninsular Malaysia. International Journal of Advanced and Applied Sciences, 4 (11). pp. 11-16. ISSN 2313-3724

Syahirah, M. M. and Rashid, M. and Nor Ruwaida, J. (2016) Total particulate matter, PM10, PM2.5 emissions from palm oil mill boiler. Jurnal Teknologi, 78 (6-11). pp. 41-44. ISSN 0127-9696

Syed, Obed Rashdi and Omar, Rosmini (2018) Factors influencing management development of MBA students: exploring concerns of business schools in Pakistan. International Interdiscipplinary Business-Economics Advancement Journal, 3 (1). pp. 1-18. ISSN 2375-9615

Syed Abd. Rahaman, Sharipah Alwiah and Bahardin, Mohd. Kamal (2018) Assessment of ergonomic risk level at tire manufacturing plant in Petaling Jaya, Selangor. Journal of Advanced Research in Occupational Safety and Health, 2 (1). pp. 20-27. ISSN 2637-0255

Syed Ahmad, S. Z. A. and Syed Ahmad, M. K. and Mohd. Zaki, N. I. and Mukhlas, N. A. and Soom, E. M. and Azman, N. U. and Najafian, G. (2021) Offshore structural reliability assessment by probabilistic procedures—a review. Journal of Marine Science and Engineering, 9 (9). ISSN 2077-1312

Syed Ahmad, Sayyid Zainal Abidin and Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Mukhlas, Nurul Azizah and Mat Soom, Ezanizam and Azman, Nurul Uyun and Najafian, Gholamhossein (2021) Offshore Structural Reliability Assessment by Probabilistic Procedures-A Review. Journal of Marine Science and Engineering, 9 (9). pp. 1-25. ISSN 2077-1312

Syed Ariffinffin, Syed Ahmad Iskandar and Che Ibrahim, Idaura Fadhya and Ismail, Alice Sabrina (2022) The relationship between interior design and architecture. Journal of Islamic, Social, Economics and Development (JISED), 7 (44). pp. 1-10. ISSN 0128-1755

Syed Ilias, Syed Hashim and Wan Mohd Akib, Wan Abdul Aziz (1997) Gravity Anomaly And Topography Induced By Repeated Fault Motions. Buletin Geoinformasi, 2 (1). pp. 71-82. ISSN 1394-7702

Syed Othman, Syed Muhammad Nazir and Abdul Rahim, Zulhasni (2022) Construction 4.0 intervention in quality assessment system in construction’s implementation. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). pp. 713-722. ISSN 2367-4512

Sykes, J. M. and Whyte, E. P. and Yu, X. and Sahir, Z. Sharer (2017) Does "coating resistance" control corrosion? Progress in Organic Coatings, 102 . pp. 82-87. ISSN 0300-9440

T. Thirugnana, Sathiabama and Abu Bakar, Jaafar and Takeshi, Yasunaga and Tsutomu, Nakaoka and Yasuyuki, Ikegami and Suriyanti Su, Suriyanti Su (2021) Estimation of ocean thermal energy conversion resources in the east of Malaysia. Journal of Marine Science and Engineering, 9 (1). pp. 1-11. ISSN 2077-1312

Tabatabaee, Sanaz and Aghaabbasi, Mahdi and Mahdiyar, Amir and Zainol, Rosilawati and Ismail, Syuhaida (2021) Measurement quality appraisal instrument for evaluation of walkability assessment tools based on walking needs. Sustainability (Switzerland), 13 (20). pp. 1-22. ISSN 2071-1050

Tabatabaee, Sanaz and Ashour, Mojtaba and Mohandes, Saeed Reza and Sadeghi, Haleh and Mahdiyar, Amir and Hosseini, M. Reza and Ismail, Syuhaida (2022) Deterrents to the adoption of green walls: a hybrid fuzzy-based approach. Engineering, Construction and Architectural Management, 29 (9). pp. 3460-3479. ISSN 0969-9988

Tabatabaee, Sanaz and Mohandes, Saeed Reza and Ahmed, Rana Rabnawaz and Mahdiyar, Amir and Arashpour, Mehrdad and Zayed, Tarek and Ismail, Syuhaida (2022) Investigating the barriers to applying the internet-of-things-based technologies to construction site safety management. International Journal of Environmental Research and Public Health, 19 (2). pp. 1-15. ISSN 1661-7827

Tahsildari, Hamed and Hashim, Mohd. Taib and Wan Zakaria, Wan Normeza (2014) The influence of transformational leadership on organizational effectiveness through employees' innovative behaviour. Journal Of Economics And Sustainable Development, 5 (24). pp. 225-236. ISSN 2222-2855

Taib, Mohd Rozainee and Ngo, S. P. and Johari, Anwar and Salema, A. A. and Tan, K. G. (2009) Utilisation of rice husk waste and its ash (Part 2). The Ingineur, 42 (Pt 2). pp. 37-41. ISSN 0128-4347

Taib, Mohamad Rozainee (1995) Air pollution emissions from a steel mill plant using electric arc furnace. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A15-1.

Taib, Mohamad Rozainee and Kumoro, Andri Cahyo and Tan, K. G. (2001) Fluidized bed technology: it's challenges in industrial applications. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 402-408.

Taib, Mohamad Rozainee and Lim, S. Y. and Looi, S. and Ngo, S. P. (2001) Initial study on the combustion of palm wastes in a spouted bed. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 378-383.

Taib, Mohamad Rozainee and Looi, Y. S. and Lim, S. Y. and Choi, L. S. and Lee, Y. T. and Mohd Yusof, Mohd Rashid (2001) The effect of draft tube on the performance of a spouted bed for rice husk combustion. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 104-108.

Taib, Mohamad Rozainee and Ngo, S. P. (2001) Three dimensional CFD modelling of the effect of some operating parameters on particle trajectories in a rotating fluidised bed combustors. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 38-45.

Taib, Mohamad Rozainee and W. Ali, W. Khairuddin and Tan, K. G. and Tan, C. H. and Kumoro, A. C. (2001) Comparison of sludge drying performance between microwave and convective drying. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 361-367.

Talpur, Kazim Raza and Yuhaniz, Siti Sophiayati and Amir Sjarif, Nilam Nur and Ali, Bandeh (2020) Cyberbullying detection in Roman Urdu language using lexicon based approach. Journal of Critical Reviews, 7 (16). pp. 834-848. ISSN 2394-5125

Talpur, Kazim Raza and Yuhaniz, Siti Sophiayati and Amir Sjarif, Nnilam Nur and Ali, Bandeh and Kamaruddin, Norshaliza (2020) Cyberbullying detection: Current trends and future directions. Journal of Theoretical and Applied Information Technology, 98 (16). pp. 3197-3208. ISSN 1992-8645

Tamam, M. Q. M. and Abdullah, N. R. and Yahya, W. J. and Kadir, H. A. (2021) Effects of ethanol blending with methanol-gasoline fuel on spark ignition engine performance and emissions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). ISSN 2289-7879

Tan, C. Y. and Ismail, N. and Ooi, C. Y. and Hon, J. Y. (2019) Accelerating extreme learning machine on FPGA by hardware implementation of given rotation - GRD. International Journal of Integrated Engineering, 11 (7). pp. 31-39. ISSN 2229-838X

Tan, Chia Wanq and Rukayadi, Yaya and Hasan, Hanan and Abdul-Mutalib, Noor-Azira and Jambari, Nuzul Noorahya and Hara, Hirofumi and Thung, Tze Young and Lee, Epeng and Radu, Son (2021) Isolation and characterization of six vibrio parahaemolyticus lytic bacteriophages from seafood samples. Frontiers in Microbiology, 12 (NA). pp. 1-13. ISSN 1664-302X

Tan, Chong Yeam and Ooi, Chia Yee and Choo, Hau Sim and Ismail, Nordinah (2022) Efficient hardware-accelerated pseudoinverse computation through algorithm restructuring for parallelization in high-level synthesis. International Journal of Circuit Theory and Applications, 50 (2). pp. 394-416. ISSN 0098-9886

Tan, Chun Kit and Mohd. Azmi, Nurulhuda Firdaus (2021) Customer profiling for Malaysia online retail industry using K-Means clustering and RM model. International Journal of Advanced Computer Science and Applications, 12 (1). pp. 106-113. ISSN 2158-107X

Tan, L. S. and Tsuji, T. and Sharif, A. M. and Tay, W. H. and Lau, K. K. and Hairul, N. A. H. (2020) Impact of N-Methyl-2-Pyrrolidone in monoethanolamine solution to the CO2 absorption in packed column: analysis via mathematical modeling. Sains Malaysiana, 49 (11). pp. 2625-2635. ISSN 0126-6039

Tan, Lian See and Ahmad, Abdul Latif and Abd. Shukor, Syamsul Rizal and Yeap, Swee Pin (2019) Impact of solute properties and water matrix on nanofiltration of pesticides. Chemical Engineering and Technology, 42 (9). pp. 1780-1787. ISSN 0930-7516

Tan, Lian See and Kubota, Kenichi and Tan, Jully and Kiew, Peck Loo and Okano, Takasei (2022) Learning first principles theories under digital divide: Effects of virtual cooperative approach on the motivation of learning. Education for Chemical Engineers, 40 (NA). pp. 29-36. ISSN 1749-7728

Tan, Liat Choon and Kathitasapathy, Shanmugapathy and Tan, Wee Vern and Looi, Kam Seng and Toh, Ming Liang and Azri, Nor Suhaibah and Ujang, Muhamad Uznir and Thoo, Ai Chin and Safaai, Siti Sarah and Suhailin, Fariza Hanim and Hasim, Nurhafizah and Ahmad, Nur Hidayah and Krishnan, Ganesan and Jalil, Muhammad Arif (2022) Establishment of the subsidiary management corporation in the integrated development. Journal of Islamic, Social, Economics and Development (JISED), 7 (44). pp. 11-19. ISSN 0128-1755

Tan, Lit-Ken and Ong, Sie-Meng and Lee, Kee-Quen and Gan, Yee-Siang and Goh, Chien-Yong and Tey, Wah-Yen and Su, Kong-Ngien (2017) Principal component analysis on meteorological data in UTM KL. Progress in Energy and Environment, 1 (1). pp. 40-46. ISSN 2600-7762

Tan, M. L. and Ibrahim, A. L. and Yusop, Z. and Chua, V. P. and Chan, N. W. (2017) Climate change impacts under CMIP5 RCP scenarios on water resources of the Kelantan River Basin, Malaysia. Atmospheric Research, 189 . pp. 1-10. ISSN 0169-8095

Tan, M. Y. and Liza, S. and Khadijah, S. M. P. and Abbas, A. A. and Merican, A. M. and Ayob, K. A. and Zulkifli, N. W. M. and Masjuki, H. H. (2020) Surface analysis of early retrieved polyethylene tibial inserts for both knees in total knee replacement. Engineering Failure Analysis, 109 . ISSN 1350-6307

Tan, M. L. and Ibrahim, A. L. and Cracknell, A. P. and Yusop, Z. (2017) Changes in precipitation extremes over the Kelantan River Basin, Malaysia. International Journal of Climatology, 37 (10). pp. 3780-3797. ISSN 0899-8418

Tan, Owee Kowang and Choi, Sang Long and Rasli, Amran and Goh, Chin Fei (2016) Perception versus performance indicators: a study of innovation performance in a research university. Asian Social Science, 12 (1). pp. 24-29. ISSN 1911-2017

Tan, Patrick Beng Keat and Wan Zakaria, Wan Normeza and Mohdali, Raihana (2020) Factors influencing purchase intention of life insurance among engineering students. Open International Journal of Informatics (OIJI), 8 (1). pp. 1-9. ISSN 2289-2370

Tan, Tze Hon and Ooi, Chia Yee and Marsono, Muhammad Nadzir (2022) RtFog: A real-time FPGA-based fog node with remote dynamically reconfigurable application plane for fog analytics redeployment. IEEE Transactions on Green Communications and Networking, 6 (1). pp. 341-351. ISSN 2473-2400

Tanasta, Z. and Muhamad, P. and Kuwano, N. and Unuh, M. H. and Amran, M. H. (2019) Effect of high-temperature annealing heat treatment to microstructure of aluminium nitride on sapphire substrate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). ISSN 2289-7879

Tang, S. H. and Yeong, Che Fai and Su, Eileen Lee Ming and Subramaniam, Yuvarajoo and Chin, P.J.H. (2016) Range and bearing-based simultaneous localization and mapping of unmanned ground vehicle using unscented Kalman filter. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 119-123. ISSN 2180-1843

Tang, Z. S. and Bolong, N. and Saad, I. and Ismail, A. F. and Lim, F. T. Y. (2017) Response surface modeling of electrospinning parameters on titanium oxide nanofibers’ diameter: a Box-Behnken design (BBD). Advanced Science Letters, 23 (11). pp. 11237-11241. ISSN 1936-6612

Tap, F. M. and Abd Majid, F. A. and Ismail, H. F. and Wong, T. S. and Shameli, K. and Miyake, M. and Khairudin, N. B. A. (2018) In silico and in vitro study of the bromelain-phytochemical complex inhibition of phospholipase A2 (Pla2). Molecules, 23 (1). ISSN 1420-3049

Tap, F. M. and Khairudin, N. B. A. and Majid, F. A. A. and Rahman, N. S. A. and Omar, Z. (2020) Sequence analysis, multiple templates structure prediction and binding site identification of bromelain from ananas comosus. Journal of Engineering Science and Technology, 15 (6). pp. 4259-4272. ISSN 1823-4690

Tarmizi, S. M. A. and Nordin, N. A. and Mazlan, S. A. and Mohamad, N. and Rahman, H. A. and Aziz, S. A. A. and Nazmi, N. and Azmi, M. A. (2020) Incorporation of cobalt ferrite on the field dependent performances of magnetorheological grease. Journal Of Materials Research And Technology, 9 (6). pp. 15566-15574. ISSN 2238-7854

Tasnim, Rahayu and Banerjee, Subhashish and Saufie, Syafiqah and Thirugnana, Sathiabama T. and Mohd. Rawi, Muhammad Fikri Zhafran and Jaafar, A. Bakar (2022) Sustainability of renewable energy systems with special referenceto ocean thermal energy conversion schemes. Non-Metallic Material Science, 4 (2). pp. 33-48. ISSN 2661-3301

Taverne, Jonas and Muhammad Sukki, Firdaus and Ayub, Ahmad Syahir and Sellami, Nazmi and Abu Bakar, Siti Hawa and Bani, Nurul Aini and Mas’ud, Abdullahi Abubakar and Iyi, Draco (2018) Design of solar powered charging backpack. International Journal of Power Electronics and Drive Systems, 9 (2). pp. 848-858. ISSN 2088-8694

Tayebiyan, Aida and Mohammad, Thamer Ahmad and Ghazali, Abdul Halim and Megat Mohd. Noor, Megat Johari (2018) Simulation and optimization of multiple points hedging policies for operation of cameron highland hydropower reservoir system, Malaysia. Desalination and Water Treatment, 120 . pp. 205-216. ISSN 1944-3994

Tea, S. Y. and Abdul Manan, Zainuddin (2003) Retrofit of heat exchanger network in a paper making industry. Proceedings of International Conference on Chemical and Bioprocess Engineering . pp. 405-409.

Tee, Y. W. and Mohd. Aris, S. A. (2020) Electroencephalogram (eeg) stress analysis on alpha/beta ratio and theta/beta ratio. Indonesian Journal of Electrical Engineering and Computer Science, 17 (1). pp. 175-182. ISSN 2502-4752

Tengah, Z. and Ali, Mohd. Tarmizi and Abd. Rahman, N. H. and Pasya, Idnin and Abd. Hamid, Shazlina and Subahir, Suhaila and Yamada, Yoshihide (2018) Design of serial-fed bend-array and measured results. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 29-33. ISSN 2180-1843

Tengku Zainul Akmal, Tengku Afiah Mardhiah and Than, Joel Chia Ming and Abdullah, Haslailee and Mohd. Noor, Norliza (2019) Chest x-ray image classification on common thorax diseases using GLCM and AlexNet deep features. International Journal of Integrated Engineering, 11 (4). pp. 21-30. ISSN 2229-838X

Teo, M. T. and Nasef, M. M. and Aravindan, D. and Ahmad, M. A. and Mokhtar, M. and Kamarudin, N. A. and Abd. Rahman, A. F. (2021) Comparative modelling analysis of boron dynamic adsorption on fibrous adsorbent prepared using radiation grafting versus granular resin. Journal of Environmental Chemical Engineering, 9 (3). ISSN 2213-3437

Teo, T. M. and Nasef, M. M. and Aravindan, D. and Rosslan, I. F. N. and Ruslan, N. (2021) Selective removal of boron from industrial wastewater containing high concentration of ammonia by radiation grafted fibrous adsorbent in fixed bed column. Journal of Environmental Chemical Engineering, 9 (1). ISSN 2213-3437

Teow, S. Y. and Wong, M. M. and Yap, H. Y. and Peh, S. C. and Shameli, K. (2018) Bactericidal properties of plants-derived metal and metal oxide nanoparticles (NPs). Molecules, 23 (6). p. 1366. ISSN 1420-3049

Tey, W. Y. and Che Sidik, N. A. and Asako, Y. A. and Muhieldeen, M. W. and Afshar, O. (2021) Moving least squares method and its improvement: a concise review. Journal of Applied and Computational Mechanics, 7 (2). ISSN 2383-4536

Tey, W. Y. and Hong, R. Y. M. and Asako, Y. and Kang, H. S. and Ng, K. C. (2019) Analysis on computational efficiency of convection discretisation schemes in simple algorithm. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 100-117. ISSN 2289-7879

Tey, W. Y. and Lee, K. M. and Asako, Y. and Tan, L. K. and Arai, N. (2020) Multivariable power least squares method. Complementary tool for response surface methodology. Ain Shams Engineering Journal, 11 (1). pp. 161-169. ISSN 2090-4479

Than, J. C. M. and Saba, L. and Noor, N. M. and Rijal, O. M. and Kassim, R. M. and Yunus, A. and Suri, H. S. and Porcu, M. and Suri, J. S. (2017) Lung disease stratification using amalgamation of Riesz and Gabor transforms in machine learning framework. Computers in Biology and Medicine, 89 . pp. 197-211. ISSN 0010-4825

Than, Joel Chia Ming and Mohd. Noor, Norliza and Mohd. Rijal, Omar and M. Kassim, Rosminah and Yunus, Ashari (2018) Lung disease classification using GLCM and deep features from different deep learning architectures with principal component analysis. International Journal of Integrated Engineering, 10 (7). pp. 76-89. ISSN 2229-838X

Tharek, Ameerah and Jamaluddin, Haryati and Md. Salleh, Madihah and Yahya, Nurul Ashyikin and Kaha, Marshila and Hara, Hirofumi and Iwamoto, Koji and Mohamad, Shaza Eva (2020) Astaxanthin production by tropical microalgae strains isolated from environment in Malaysia. Asian Journal Of Microbiology, Biotechnology & Environmental Sciences, 22 (1). pp. 168-173. ISSN 0972-3005

Tharek, Ameerah and Mohamad, Shaza Eva and Koji, Iwamoto and Iwane, Suzuki and Hirofumi, Hara and Dolah, Rozzeta and Shinji, Yoshizaki and Jamaluddin, Haryati and Md. Salleh, Madihah and Yahya, Adibah (2020) Enhanced astaxanthin production by oxidative stress using methyl viologen as a reactive oxygen species (ROS) reagent in green microalgae Coelastrum sp. Indonesian Journal of Biotechnology, 25 (2). pp. 95-101. ISSN 0853-8654

Theng, Lina Mary and Tan, Jully and Liew, Peng Yen and Tan, Lian See (2021) A review of manufacturing sustainability assessment tool selection criteria: A quantitative score-rating system versus process-data sustainability assessment. Chemical Engineering Transactions, 89 . pp. 523-528. ISSN 2283-9216

Theng, Mary Lina and Tan, Lian See and Siaw, Wen Chun (2020) Adsorption of methylene blue and congo red dye from water onto cassava leaf powder. Progress in Energy and Environment, 12 . pp. 11-21. ISSN 2600-7762

Thinakaran, R. and Ali, R. (2017) Programming tutoring systems and motivation assessment model. Advanced Science Letters, 23 (4). pp. 2709-2712. ISSN 1936-6612

Thinakaran, Rajermani and Chuprat, Suriayati (2022) Students’ characteristics of student model in intelligent programming tutor for learning programming: a systematic literature review. International Journal of Advanced Computer Science and Applications, 13 (7). pp. 669-676. ISSN 2158-107X

Thines, K. R. and Abdullah, E. C. and Mubarak, N. M. and Ruthiraan, M. (2017) Synthesis of magnetic biochar from agricultural waste biomass to enhancing route for waste water and polymer application: A review. Renewable & Sustainable Energy Reviews, 67 . pp. 257-276. ISSN 1364-0321

Thines, K. R. and Abdullah, E. C. and Ruthiraan, M. and Mubarak, N. M. and Tripathi, M. (2016) A new route of magnetic biochar based polyaniline composites for supercapacitor electrode materials. Journal of Analytical and Applied Pyrolysis, 121 . pp. 240-257. ISSN 0165-2370

Thines, K. R. and Abdullah, E. C. and Mubarak, N. M. and Ruthiraan, M. (2017) In-situ polymerization of magnetic biochar – polypyrrole composite: A novel application in supercapacitor. Biomass and Bioenergy, 98 . pp. 95-111. ISSN 0961-9534

Thou, Chin Zhen and Ahmed Khan, Fahad Saleem and Mubarak, N. M. and Ahmad, Awais and Mohammad Khalid, Mohammad Khalid and Jagadish, Priyanka and Walvekar, Rashmi and Abdullah, E. C. and Khan, Safia and Khan, Mariam and Hussain, Shahid and Ahmad, Ikram and Algarni, Tahani Saad (2021) Surface charge on chitosan/cellulose nanowhiskers composite via functionalized and untreated carbon nanotube. Arabian Journal of Chemistry, 14 (3). p. 103022. ISSN 1878-5352

Thulasy, T. Nanthakumaran and Nohuddin, Puteri N. E. and Abd. Rahim, Noorlizawati and Amrin, Astuty (2022) Skill set issues in aircraft maintenance from industrial revolution 4.0 context: A document analytics survey. Human Systems Management, 41 (4). pp. 503-516. ISSN 0167-2533

Tijani, Hamzat and Yuzir, Ali and Wan Dagang, Wan Rosmiza Zana and Zamyadi, Arash and Abdullah, Norhayati (2018) Multi-parametric modelling and kinetic sensitivity of microalgal cells. Algal Research-Biomass Biofuels And Bioproducts, 32 . pp. 259-269. ISSN 2211-9264

Ting, T. M. and Nasef, M. M. (2017) Modification of polyethylene-polypropylene fibers by emulsion and solvent radiation grafting systems for boron removal. Fibers and Polymers, 18 (6). pp. 1048-1055. ISSN 1229-9197

Ting, T. M. and Nasef, M. M. and Sithambaranathan, P. (2017) Kinetic investigations of emulsion- and solvent-mediated radiation induced graft copolymerization of glycidyl methacrylate onto nylon-6 fibres. Journal of Radioanalytical and Nuclear Chemistry, 311 (1). pp. 843-857. ISSN 0236-5731

Tojo, T. and Ono, O. and Md. Noh, N. B. and Yusof, R. (2017) Interactive tutor robot for collaborative e-learning system. IEEJ Transactions on Electronics, Information and Systems, 137 (10). pp. 1373-1378. ISSN 0385-4221

Tomoya, Tsuji and Hiroyuki, Matsuda and Makoto, Kawakita and Kiyofumi, Kurihara and Katsumi, Tochigi (2022) Vapor-liquid equilibrium (VLE) measurements of ethanol – heptane at isothermal (363.15, 393.15 and 423.15 K) and isobaric (101.33 kPa) conditions and correlation of liquid viscosity data. Chemical Thermodynamics and Thermal Analysis, 6 (NA). pp. 1-9. ISSN 2667-3126

Toto, Saktioto and Ali, Jalil and Zainal, Jasman and Fadhali, Mohamed (2007) Modeling of normalized frequency gradient for fused single mode fiber of coupling ratio. SPIE/COS photonics asia . p. 1. (Unpublished)

Tran, M. V. and Scribano, G. and Chong, C. T. and Ho, T. X. (2017) Influence of hydrocarbon additions and dilutions on explosion behavior of syngas/air mixtures. International Journal of Hydrogen Energy, 42 (44). pp. 27416-27427. ISSN 0360-3199

Triwahyono, Sugeng and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Hattori, H. and Yamada, T. (2004) Molecular hydrogen-originated protonic acid site on Pt/WO3-ZrO2. KUSTEM Third Annual Seminar on Sustainbility Science and Management . pp. 53-56.

Triwahyono, Sugeng and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Yamada, T. and Hattori, H. (2004) The factors affecting the hydrogen adsorption on Pt/SO4(2-)-ZrO2 catalyst. KUSTEM Third Annual Seminar on Sustainbility Science and Management . pp. 85-88.

Tseng, Hsiao-Ting and Shanmugam, Mohana and Magalingam, Pritheega and Shahbazi, Shahriyar and Featherman, Mauricio S. (2022) Managing enterprise social media to develop consumer trust. British Food Journal, 124 (12). pp. 4626-4643. ISSN 0007-070X

Tsuboi, Yusei and Ibrahim, Zuwairie and Kasai, Nobuyuki and Ono, Osamu (2005) DNA computing approach to construction of semantic model. Lecture Notes in Computer Science, 3611 . pp. 1174-1181. ISSN 0302-9743

Tsuji, T. and Hoshina, T. A. and Takagi, T. (2020) P-v-t relationship/saturated vapor pressure of dimethyl ether (dme) as an alternative for liquefied petroleum gas and determination of 8 constants in the benedict-webb-rubin (bwr) equation of state. Journal of the Japan Petroleum Institute . pp. 107-122. ISSN 1346-8804

Tsuji, T. and Nakazawa, M. and Lai, A. J. X. and Abdul Manaf, N. B. and Hoshina,, T. A. and Oba, S. and Yoshida, A. (2020) Measurement and prediction of bubble point pressure of a novel solvent with propellant for color spray. Fluid Phase Equilibria, 505 . ISSN 0378-3812

Tsuji, T. and Shigeru, M. and Hoshina, T. A. and Yoneda, K. and Funazukuri, T. and Morad, N. A. (2017) CO2 solubility in water containing monosaccharides, and the prediction of pH using Peng-Robinson equation of state. Fluid Phase Equilibria, 441 . pp. 9-16. ISSN 0378-3812

Tsuji, Tomoya and Hoshina, Taka-Aki and Kinoshita, Shinichi and Yoshida, Atsumasa (2022) Eight constants in the benedict-webb-rubin equation of state for 1-pentyne and their validity for bubble point pressure with propane or dimethyl ether. Journal of the Japan Petroleum Institute, 65 (3). pp. 97-109. ISSN 1346-8804

Tsuji, Tomoya and Sato, Toshiyuki and Hoshina, Taka-Aki and Oba, Shigeo (2021) Boiling point of five new sulfur-free odorants for LPG, 1-pentyne, cyclopentene, 1-hexyne, 2-hexyne and 1,5-cyclooctadiene, and bubble point pressures of binaries with Propane5. Journal of the Japan Petroleum Institute, 64 (2). pp. 92-102. ISSN 1346-8804

Tsuji, Yukiko and Vanholme, Ruben and Tobimatsu, Yuki and Ishikawa, Yasuyuki and Foster, Clifton E. and Kamimura, Naofumi and Hishiyama, Shojiro and Hashimoto, Saki and Shino, Amiu and Hara, Hirofumi and Kanna, Sato-Izawa and Oyarce, Paula and Goeminne, Geert and Morreel, Kris and Kikuchi Morreel, Jun and Takano, Toshiyuki and Fukuda, Masao and Katayama, Yoshihiro and Boerjan, Wout and John, Ralph and Masai, Eiji and Kajita, Shinya (2015) Introduction of chemically labile substructures into Arabidopsis lignin through the use of LigD, the C-dehydrogenase from Sphingobium sp strain SYK-6. Plant Biotechnology Journal, 13 (6). pp. 821-832. ISSN 1467-7644

Tuan, Nguyen T. and Yamada, Yoshihide and Dinh, Nguyen Quoc and Mohd. Baharin, Rasyidah Hanan and Kamardin, Kamilia and Dung, Dang Tien and Michishita, Naobumi (2018) Deterministic equation of self-resonant structures for normal-mode helical antennas implanted in a human body. IEEE Antennas and Wireless Propagation Letters, 17 (8). pp. 1377-1381. ISSN 1536-1225

Tung, Chun Yaw and Saidina Amin, Nor Aishah (2005) Analysis Of Carbon Dioxide Reforming Of Methane Via Thermodynamic Equilibrium Approach. Jurnal Teknologi F (43F). pp. 31-50. ISSN 0127-9696

Tung, Hao Kean and Che Sidik, Nor Azwadi and Asako, Yutaka and Tan, Lit Ken and Aid, Siti Rahmah (2018) Numerical study on heat transfer performance enhancement of phase change material by nanoparticles: A review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 55-63. ISSN 2289-7879

Ubaidillah, Ubaidillah and Choi, H. J. and Mazlan, S. A. and Imaduddin, F. and Harjana, Harjana (2016) Fabrication and viscoelastic characteristics of waste tire rubber based magnetorheological elastomer. Smart Materials and Structures, 25 (11). ISSN 0964-1726

Ubaidillah, Ubaidillah and Imaduddin, F. and Li, Y. and Mazlan, S. A. and Sutrisno, J. and Koga, T. and Yahya, I. and Choi, S. B. (2016) A new class of magnetorheological elastomers based on waste tire rubber and the characterization of their properties. Smart Materials and Structures, 25 (11). ISSN 0964-1726

Umair, H. and Latef, T. A. and Yamada, Y. and Hassan, T. and Wan Mahadi, W. N. L. and Othman, M. and Kamardin, K. and Hussein, M. I. (2021) Quarter wavelength fabry–perot cavity antenna with wideband low monostatic radar cross section and off-broadside peak radiation. Applied Sciences (Switzerland), 11 (3). ISSN 2076-3417

Umair, H. and Latef, T. A. and Yamada, Y. and Wan Mahadi, W. N. L. and Othman, M. and Kamardin, K. and Hussein, M. I. and Najam, A. I. (2021) Tilted beam fabry-perot antenna with enhanced gain and broadband low backscattering. Electronics (Switzerland), 10 (3). pp. 1-21. ISSN 2079-9292

Umor, Sarimah and Zakaria, Zarina and Sulaiman, Noor Adwa and Mohamed Kutty, Rasheed (2018) Actor' interaction in the follow-up on performance auditing issues in Malaysia: Uncovering the contributing factors and constraining challenges. International Journal of Engineering and Technology(UAE), 7 (4). pp. 491-498. ISSN 2227-524X

Unuh, H. and Muhamad, P. and Yakub, F. and Ismail, M. A. and Tanasta, Z. (2019) Experimental validation to a prototype magnetorheological (MR) semi-active damper for C-class vehicle. International Journal of Automotive and Mechanical Engineering, 16 (3). pp. 7034-7047. ISSN 2229-8649

Usman, Sahnius and Harun, Norhaslinda and Bani, Nurul Aini and Mad Kaidi, Hazilah and Mohd. Aris, Siti Armiza and A. Jalil, Siti Zura and Muhtazaruddin, Mohd. Nabil (2020) Significance of SPM additional mathematics and physics toward engineering diploma student’s performance at PPD space. International Journal of Psychosocial Rehabilitation, 24 (5). pp. 5260-5266. ISSN 1475-7192

Usman, Sahnius and Mohd. Izhar, Mohd. Azri and Selamat, Nor Fasihah and Selamat, Nor Madihah (2022) Proposed new first level resolution by telecommunication service operation centre of employing robotic process automation. Open International Journal Of Informatic (OIJI), 10 (2). pp. 172-181. ISSN 2289-2370

Uthman, H. (2017) Recycling and characterisation of spent lubricating oil. International Journal of Environment and Waste Management, 19 (2). pp. 181-190. ISSN 1478-9876

V-Ghaffari, Babak and Kouhnavard, M. and Elbasiouny, Sherif M. (2017) Mixed-mode oscillations in pyramidal neurons under antiepileptic drug conditions. Plos One, 12 (6). ISSN 1932-6203

Vadivelu, B. and Meyyazhagan, A. and Palanisamy, S. and Arumugam, V. A. and Kamyab, H. and Balasubramanian, B. and Chelliapan, S. and Yadav, K. K. (2020) Synthesis of silver nanoparticles from fish scale extract of cyprinus carpio and its decolorization activity of textile dyes. Journal of Environmental Treatment Techniques, 8 (3). pp. 870-874. ISSN 2309-1185

Valachamy, Mageshwari and Sahibuddin, Shamsul and Ahmad, Noor Azurati and Abu Bakar, Nur Azaliah (2019) A review of MyGDI: the catalyst of the evolution of Geographical information systems in Malaysian public sector. Open International Journal of Informatics, 7 (2). pp. 127-137. ISSN 2289-2370

Valaei, N. and Rezaei, S. and Ismail, W.K.W. (2017) Examining learning strategies, creativity, and innovation at SMEs using fuzzy set Qualitative Comparative Analysis and PLS path modeling. Journal of Business Research, 70 . pp. 224-233. ISSN 0148-2963

Velautham, Khailash Dhasan and Chelliapan, Shreeshivadasan and Kamaruddin, Samira Albati and Meyers, John Lawrence (2022) Design of oil water separator for the removal of hydrocarbon from stormwater contaminated with jet-fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 162-176. ISSN 2289-7879

Velautham, Khailash Dhasan and Chelliapan, Shreeshivadasan and Kamaruddin, Samira Albati and Meyers, John Lawrence (2022) Design requirements for the treatment of stormwater contaminated with jet fuel oil using corrugated plate interceptor. Egyptian Journal of Chemistry, 65 (1). 1 -10. ISSN 0449-2285

Velayutham, Yuvaraaj and Abu Bakar, Nur Azaliah and Hassan, Noor Hafizah and Samy, Ganthan Narayana (2021) IoT security for smart grid environment: Issues and solutions. Jordanian Journal of Computers and Information Technology, 7 (1). pp. 13-24. ISSN 2413-9351

Velu, Manikandan and Balasubramanian, Balamuralikrishnan and Velmurugan, Palanivel and Kamyab, Hesam and Ravi, Arumugam Veera and Chelliapan, Shreeshivadasan and Lee, Chew Tin and Palaniyappan, Jayanthi (2021) Fabrication of nanocomposites mediated from aluminium nanoparticles/Moringa oleifera gum activated carbon for effective photocatalytic removal of nitrate and phosphate in aqueous solution. Journal of Cleaner Production, 281 . p. 124553. ISSN 09596526

Venugopal, Arvinthan and Mohammad, Roslina and Koslan, Md. Fuad Shah and Sayd Bakar, Syed Roslee and Ali, Alizarin (2021) The effect of tropical environment on fatigue failure in Royal Malaysian Airforce (RMAF) aircraft structure and operational readiness. Materials, 14 (9). p. 2414. ISSN 1996-1944

W. Yussof, W. M. Hafizuddin and Sarmidi, Mohamad Roji (2003) Equilibrium and kinetic modeling of the adsorption of stevioside on amberlite XAD-7 beads. Proceedings of International Conference on Chemical and Bioprocess Engineering . pp. 103-110.

Wahab, A. M. and Rasid, Z. A. and Rudin, N .F. M. and Abu, A. (2017) Parametric instability of shafts based on the Nelson’s beam model using finite element method. Advanced Science Letters, 23 (5). pp. 4478-4482. ISSN 1936-6612

Wahab, A. M. A. and Roslan, S. A. H. and Rasid, Z. A. and Abu, A. and Rudin, N. F. M. N. and Yakub, F. (2019) The whirling frequency of high speed shaft with torsional effect. International Journal of Recent Technology and Engineering, 7 (6). pp. 119-123. ISSN 2277-3878

Wahab, N. A. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Kamaruddin, S. and Ismail, N. I. N. and Choi, S. B. and Sharif, A. H. R. (2016) Fabrication and investigation on field-dependent properties of natural rubber based magneto-rheological elastomer isolator. Smart Materials and Structures, 25 (10). ISSN 0964-1726

Wahid, M. A. A. and Megat Mohd. Noor, M. J. and Hara, H. (2016) Recombinant Moringa oleifera lectin produced in Pichia pastoris is a potential natural coagulant. Evergreen, 3 (2). pp. 11-16. ISSN 2189-0420

Wahid, N. and Zamzuri, H. and Amer, N. H. and Dwijotomo, A. and Saruchi, S. A. and Mazlan, S. A. (2020) Vehicle collision avoidance motion planning strategy using artificial potential field with adaptive multi-speed scheduler. IET Intelligent Transport Systems, 14 (10). ISSN 1751-956X

Wahid, N. and Zamzuri, H. and Hassan, N. and Rahman, M. A. A. (2017) Potential field based motion planning with steering control and DYC for ADAS. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 853-860. ISSN 1693-6930

Wahit, Mat Uzir and Hassan, Azman and Mohd Ishak, Z. A. and Abu Bakar, A. (2005) The effect of polyethylene-octene elastomer on the morphological and mechanical properties of polyamide 6/ polypropylene nanocomposites. Polymers & Polymer Composites, 13 (8). pp. 795-806. ISSN 0967-3911

Wakil, Karzan and A.Jawawi, Dayang N. (2019) Intelligent web applications as future generation of web applications. Scientific Journal of Informatics, 6 (2). pp. 212-221. ISSN 2407-7658

Wan Abd Rahman, W. A. Z. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Work breakdown structure application for man-hours calculation in hull construction shipbuilding in Malaysia. Cogent Engineering, 6 (1). ISSN 2331-1916

Wan Abdul Rahman, Wan Aizan (1992) Natural rubber/epoxidised natural rubber and thermoplastic ternary blends. 1. Effect of preparation techniques on the properties of blends. Prosiding Simposium Jurutera Kimia Malaysia Ke-8 .

Wan Abdul Rahman, Wan Aizan and Abdullah, Ibrahim (1993) Natural rubber/epoxidised natural rubber/polyvinyl chloride ternary blends. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 3-2.

Wan Abdul Rahman, Wan Aizan (1990) Spectroscopic analysis of cis-polyisoprene and polymethyl methacrylate graft copolymers. Buletin FKKKSA, 4 (1). pp. 36-50. ISSN 0128-0740

Wan Abdul Rahman , Wan Aizan (1992) Natural rubber graft copolymer synthesis - a review. Buletin FKKKSA, 6 (1). pp. 32-38. ISSN 0128-0740

Wan Mat Khalir, Wan Khaima Azira and Shameli, Kamyar and Miyake, Mikio and Othman, Nor Azizi (2018) Efficient one-pot biosynthesis of silver nanoparticles using Entada spiralis stem powder extraction. Research on Chemical Intermediates, 44 (11). pp. 7013-7028. ISSN 0922-6168

Wan Mohd. Rani, Wan Nurul Mardiah (2014) Understanding the usage pattern of local facilities in urban neighbourhood towards creating a livable city. American Transactions of Engineering and Applied Sciences, 3 (2). pp. 129-148. ISSN 2229-1652

Wan Nik, W. B. and Ani, F. N. and Masjuki, H. H. (2005) Thermal stability evaluation of palm oil. Energy Conversion and Management, 46 . pp. 2198-2215. ISSN 0196-8904

Wan Nik, B. W. and Maleque, M. A. and Ani, Farid Nasir and Masjuki, Hassan (2007) Experimental Investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5). pp. 200-208. ISSN 0036-8792

Wan Nik, W. B. and Ani, Farid Nasir and Masjuki, H. H. and Eng Giap, S. G. (2005) Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid. Industrial Crops and Products, 22 (3). pp. 249-255. ISSN 0926-6690

Wan Zakaria, Wan Normeza and Abas, Hafiza and Masrom, Maslin and Mohd. Ali, Raihana and Nik Mohamed, Nik Nadzirah (2019) Development of self-learning economics app for secondary school students in Malaysia based on information processing model. TEM Journal, 8 (3). pp. 908-914. ISSN 2217-8309

Wang, L. and Magliocca, E. and Cunningham, E. L. and Mustain, W. E. and Poynton, S. D. and Escudero-Cid, R. and Nasef, M. M. and Ponce González, J. and Bance Souahli, R. and Slade, R. C. T. and Whelligan, D. K. and Varcoe, J. R. (2017) An optimised synthesis of high performance radiation-grafted anion-exchange membranes. Green Chemistry, 19 (3). pp. 831-843. ISSN 1463-9262

Wannahari, Rizki and Sannasi, P. and Nordin, M. F M. and Mukhtar, Hilmi (2018) Sugarcane bagasse derived nano magnetic adsorbent composite (SCB-NMAC) for removal of Cu2+ from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 1-9. ISSN 1819-6608

Wardani, Kusumo and Tang, Boon Seng and Mat, Hanapi and Othman, Norasikin (2001) Kinetic study of silver leaching from semiconductor waste. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 389-395.

Waziralilah, N. F. and Abu, A. and Lim, M. H. and Quen, L. K. and Ahmed, E. (2019) Bearing fault diagnosis employing gabor and augmented architecture of convolutional neural network. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5689-5702. ISSN 2289-4659

Waziralilah, N. Fathiah and Abu, Aminudin and Othman, Nor’Azizi and Sone, Sanda Pyae and Hashim, U. Alyaa and Shukor, D. Shakirah and Vikneshvaran, Vikneshvaran (2017) Experimental analysis on structure-borne noise in an enclosure. International Journal of Mechanical And Production Engineering, 5 (5). pp. 76-80. ISSN 2320-2092

Wegmann, Ruw and Murid, A. H. M. and Nasser, M. M. S. (2005) The Riemann-Hilbert problem and the generalized Neumann kernel. Journal of Computational and Applied Mathematics, 182 . 388 -415. ISSN 03770427

Wei, N. R. and Usman, A. B. (2017) Organizational challenges and opportunities in the case of foxconn technology group. Advanced Science Letters, 23 (4). pp. 2991-2994. ISSN 1936-6612

Wirba, Asan Vernyuy and Abubakar Mas'ud, Abdullahi and Muhammad-Sukki, Firdaus and Ahmad, Salman and Mat Tahar, Razman and Abdul Rahim, Ruzairi and Munir, Abu Bakar and Karim, Md. Ershadul (2015) Renewable energy potentials in Cameroon: prospects and challenges. Renewable Energy, 76 . pp. 560-565. ISSN 0960-1481

Wong, Kuan Yew (2005) The potential roles of engineers in knowledge management: an overview. Jurutera, November . pp. 26-29. ISSN 0126-9909

Wong, Kuan Yew and Aspinwall, Elaine (2005) An empirical study of the important factors for knowledge-management adoption in the SME sector. Journal of Knowledge Management, 9 (3). pp. 64-82. ISSN 1367-3270

Wong, Kuan Yew and Okfalisa, Okfalisa and Salim, Naomie (2008) A knowledge diagnostic system for product defects. International Conference on Innovative Production Machines and Systems . pp. 244-249.

Wong, T. E. and Illias, R. M. and Salleh, M. M. and Hassan, O. and Kamaruddin, K. and Rahman, R. A. and Ismail, Ahmad Fauzi (2005) Initial screening of fermentation variables for the production of cyclomaltodextrin glucanotransferase (CGTase) from local isolated bacillus stearothermophillus HR1. Developments in Chemical Engineering and Mineral Processing, 13 (5/6). pp. 541-547. ISSN 1969-1855

Wong, Tien Ee and Abd. Rahman, Roshanida and Illias, R. M. and Md. Salleh, Madihah and Hassan, Osman and Kamaruddin, Kamarulzaman and Nik Mahmood, Nik Azmi (2003) Production of cyclodextrin glucanotransferase (CGTase) from Bacillus stearothermophilus HR1 in shake flasks. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 222-225.

Wong, Wai Peng and Wong, Kuan Yew (2007) Supply chain performance measurement system using DEA modeling. Industrial Management & Data Systems, 107 (3). pp. 361-381. ISSN 0263-5577

Wong, Boon Wei and Mohd. Shariff, Normawati (2018) Assessment of workplace stress of naval radar plotters. Journal Of Advanced Research In Occupational Safety And Health, 2 (1). pp. 13-19. ISSN 2637-0255

Wong, F. R. and Yasui, K. and Hashim, A. M. (2017) Growth of GaN by nitridation of seed/catalyst free electrodeposited Ga-based compound materials on graphene on insulator. Materials Science in Semiconductor Processing, 67 . pp. 98-103. ISSN 1369-8001

Wong, Kuan Yew and Aspinwall, Elaine (2006) Development of a knowledge management initiative and system: A case study. Expert Systems with Applications, 30 (4). pp. 633-641.

Wong, Kuan Yew and Aspinwall, Elaine (2005) Knowledge Management : Case Studies in SMEs and Evaluation of an Integrated Approach. Journal of Information and Knowledge Management, 4 (2). pp. 95-111.

Wong, K. Y. and Aspinwall, E. (2005) Knowledge Management: Case Studies in SMEs and Evaluation of an Integrated Approach. Journal of Information and Knowledge Management, 4 (2). pp. 95-111.

Xian, Hong Wei and Che Sidik, Nor Azwadi and Saidur, R. (2020) Impact of different surfactants and ultrasonication time on the stability and thermophysical properties of hybrid nanofluids. International Communications in Heat and Mass Transfer, 110 . p. 104389. ISSN 0735-1933

Xie, Fang and Centeno, Anthony and Ryan, Mary and Riley, David Jason and Alford, Neil M. (2013) Au nanostructures by colloidal lithography: from quenching to extensive fluorescence enhancement. Journal of Materials Chemistry B, 1 (4). pp. 536-543. ISSN 2050-7518

Ya'Acob, Suraya and Ahmad Shukri, Ilham Fitriah (2018) Increasing NCD awareness in school through physical education (PE) subject: an informatics. Open International Journal of Informatics (OIJI), 7 (1). pp. 154-164. ISSN 2289-2370

Ya'Acob, Suraya and Nik Alwi, Nik Nur Ayuni (2018) Mobile application for e-health services in Malaysian public hospital. Open International Journal of Informatics (OIJI), 6 (2). pp. 52-61. ISSN 2289-2370

Ya'Acob, Suraya and Syed Marzuki, Sharifah Izora Farah (2018) High order thinking skills (HOTS): using design thinking in solving the issues and challenges for teachers, students and parents. Open International Journal of Informatics (OIJI), 6 (2). pp. 72-80. ISSN 2289-2370

Yaacob, Rohana and Baroto, Mas Bambang (2019) Influencing variables towards the intention to purchase (ITP) and their research gaps. The Asian Journal of Technology Management, 12 (1). pp. 1-14. ISSN 2089-791X

Yaacob, N. and Ismail, Ahmad Fauzi (2004) Effect of membrane system configuration on the performance of polysulfone hollow fiber membrane system for CO2/CH4 separation. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-23.

Yaakob, Omar and Chau, Quah Peng (2005) Weather downtime and its effect on fishing operation in peninsular malaysia. Weather downtime and its effect on fishing operation in peninsular malaysia . pp. 13-26.

Yaakob, Omar and Lee, Teoh eng and Wai, Liew Yek and King, Koh Kho (2005) Design of malaysian fishing vessel for minimum resistance. Design of malaysian fishing vessel for minimum resistance . pp. 1-12. ISSN 0127-9696

Yaakob, Omar and Quah, Peng Chau (2005) Weather Downtime And Its Effect On Fishing Operation In Peninsular Malaysia. Jurnal Teknologi A (42 A). pp. 13-26. ISSN 0127-9696

Yaakob, Omar and Teoh, Eng Lee and Liew, Yek Wai and Koh, Kho King (2005) Design of Malaysian fishing vessel for minimum resistance. Jurnal Teknologi A (42A). pp. 1-12. ISSN 0127-9696

Yacob, Dzul Hafez and Sarip, S. and Suhot, M. A. and Hassan, M. Z. and Aziz, S. A. and Daud, M. Y. and Bani, N. A. and Muhtazaruddin, M. N. (2018) Critical design factors on performance of car jack lifting operations. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 521-526. ISSN 2502-4752

Yacob, Dzul Hafez and Sarip, Shamsul and Mad Kaidi, Hazilah and Ardila-Rey, Jorge Alfredo and Muhammad Sukki, Firdaus (2022) Oscillating water column geometrical factors and system performance: A review. IEEE Access, 10 (NA). pp. 32104-32122. ISSN 2169-3536

Yahaya, Nordin and Md. Noor, Norhazilan and Mat Din, Mazura and Mohd. Nor, Shadiah Husna (2009) Prediction of CO2 corrosion growth in submarine pipelines. Malaysia Journal of Civil Engineering, 21 (1). pp. 69-81. ISSN 1823-7843

Yahya, F. and Zaki, A. F. A. and Moung, A. G. and Sallehudin, H. and Abu Bakar, N. A. and Utomo, R. (2021) An IoT-based coastal recreational suitability system using effective messaging protocol. International Journal of Advanced Computer Science and Applications, 12 (8). ISSN 2158-107X

Yahya, Siti Nadia and Ramli, Aizat Faiz and Nordin, Muhammad Noor and Basarudin, Hafiz and Abu, Mohd. Azlan (2021) Comparison of convolutional neural network architectures for face mask detection. International Journal of Advanced Computer Science and Applications, 12 (12). pp. 667-677. ISSN 2158-107X

Yahya, Wira Jazair (2021) Pandemic COVID-19 effect on future courier technologies. Journal of the Society of Automotive Engineers Malaysia, 5 (1). pp. 2-4. ISSN 2600-8092

Yahya, Wira Jazair and Mohd. Zahari, Mohamad Fathur Hafeezat and Ithnin, Ahmad Muhsin and Sugeng, Dhani Avianto (2018) Determining characteristics and engine emission of steam generated water-in-diesel emulsion fuel. Journal of the Society of Automotive Engineers Malaysia, 2 (1). pp. 35-42. ISSN 2550-2239

Yakub, F. and Abu, A. and Sarip, S. and Mori, Y. (2016) Study of model predictive control for path-following autonomous ground vehicle control under crosswind effect. Journal of Control Science and Engineering, 2016 . ISSN 1687-5249

Yakub, F. and Sarip, S. and Wijaya, A. A. and Mori, Y. and Mohd. Subha, N. A. (2017) Enhancing of nominal characteristic trajectory following control for motion systems. Journal of Systems Engineering and Electronics, 28 (6). pp. 1221-1235. ISSN 1671-1793

Yamada, Junya and Kawasaki, Midori and Otsuka, Machie and Kobayashi, Atsushi and Tsuji, Tomoya (2021) Measurement and modeling of mercury solubility in methanol, glycols, and N-methyldiethanolamine. Journal of Solution Chemistry, 50 (7). pp. 968-982. ISSN 0095-9782

Yamanashi, Tomoya and Kim, Seungyoung and Hara, Hirofumi and Funa, Nobutaka (2015) In vitro reconstitution of the catabolic reactions catalyzed by PcaHG, PcaB, and PcaL: the protocatechuate branch of the beta-ketoadipate pathway in Rhodococcus jostii RHA1. Bioscience, Biotechnology and Biochemistry, 79 (5). pp. 830-835. ISSN 0916-8451

Yang, X. and Niya, A. A. and Xiao, X. and Kim, D. and Al Ghafri, S. Z. F. and Tsuji, T. and Tanaka, Y. and Seiki, Y. and May, E. F. (2020) Viscosity measurements of binary and multi-component refrigerant mixtures containing HFC-32, HFC-125, HFC-134a, HFO-1234yf and CO2. Journal of Chemical & Engineering Data, 65 (9). pp. 4252-4262. ISSN 0021-9568

Yann, H. H. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd Zaki (2003) Fault detection and diagnosis using rule-based support system on fatty acid fractionation column. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 767-772.

Yap, M. W. and Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. (2017) Microwave induced synthesis of magnetic biochar from agricultural biomass for removal of lead and cadmium from wastewater. Journal of Industrial and Engineering Chemistry, 45 . pp. 287-295. ISSN 1226-086X

Yap, S. W. and Johari, N. and Mazlan, S. A. and Hassan, N. A. (2021) Mechanochemical durability and self-cleaning performance of zinc oxide-epoxy superhydrophobic coating prepared via a facile one-step approach. Ceramics International, 47 (11). ISSN 0272-8842

Yasari, Abidulkarim K. I. and Abbas, Abdulkarim D. and Atee, Hayfaa A. and Latiff, L. A. and Dziyauddin, Rudzidatul A. and Hammood, Dalal A. (2021) Lazy multi-level dynamic traffic load balancing protocol for data center (LMDTLB). Journal of Engineering Science and Technology, 16 (3). pp. 2439-2453. ISSN 1823-4690

Yasari, Abidulkarim K. I. and Abbas, Abdulkarim D. and Atee, Hayfaa A. and Latiff, L. A. and Dziyauddin, Rudzidatul A. and Hammood, Dalal A. (2021) Lazy multi-level dynamic traffic load balancing protocol for data center (LMDTLB). Journal of Engineering Science and Technology, 16 (3). pp. 2439-2453. ISSN 1823-4690

Yasari, Abidulkarim K. I. and Latiff, Liza Abdul and Dziyaudin, Rudzidatul Akmam and Lilo, Moneer Ali and Aljeroudi, Yazan and Atee, Hayfaa A. (2016) Flexible online multi-objective optimization framework for ISA100.11a standard in beacon-enabled CSMA/CA mode. Computers and Electrical Engineering . ISSN 0045-7906 (In Press)

Yasin, M. and Irawati, N. and Harun, S. W. and Ahmad, F. and Khasanah, M. (2019) Sodium nitrate (NaNO3) sensor based on graphene coated microfiber. Measurement: Journal of the International Measurement Confederation, 146 . pp. 208-214. ISSN 0263-2241

Yasin, M. and Irawati, N. and Harun, S. W. and Khasanah, Khasanah and Ahmad, F. (2019) NaNO3 sensing based on microfiber coated with multi-walled carbon nanotubes. Optik, 185 . pp. 936-942. ISSN 0030-4026

Yasin, M. and Irawati, N. and Isa, N. M. and Harun, S. W. and Ahmad, F. (2018) Graphene coated silica microfiber for highly sensitive magnesium sensor. Sensors and Actuators, A: Physical, 273 . pp. 67-71. ISSN 0924-4247

Yasin, M. and Ninik Irawati, Ninik Irawati and Mat Isa, Naimah and Harun, Sulaiman Wadi and Ahmad, F. (2018) MWCNTs coated silica microfiber sensor for detecting Mg2+ in de-ionized water. Optik, 171 . pp. 65-70. ISSN 0030-4026

Yasmin, Tahira and Khattak, Roshanzada and Ngah, Ibrahim (2013) Facilitating earthquake-affected rural women communities toward sustainable livelihoods and agriculture. Agroecology and Sustainable Food Systems, 37 . pp. 1-24. ISSN 21683565 (Submitted)

Yatim, N. H. M. and Muhamad, P. and Abu, A. (2017) Conditioned Reverse Path method on frame structure for damage detection. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-4). pp. 49-53. ISSN 2180-1843

Yavari, Saba and Asadpour, Robabeh and Kamyab, Hesam and Yavari, Sara and Mohamed Kutty, Shamsul Rahman and Baloo, Lavania and Abd. Manan, Teh Sabariah and Chelliapan, Shreeshivadasan and Che Sidik, Azwadi (2022) Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil. Clean Technologies and Environmental Policy, 24 (1). pp. 251-260. ISSN 1618-954X

Yavari, Saba and Kamyab, Hesam and Abd. Manan, Teh Sabariah and Chelliapan, Shreeshivadasan and Asadpour, Robabeh and Yavari, Sara and Sapari, Nasiman and Baloo, Lavania and Che Sidik, Azwadi and Kirpichnikova, Irina (2022) Bio-efficacy of imidazolinones in weed control in a tropical paddy soil amended with optimized agrowaste-derived biochars. Chemosphere, 303 (NA). pp. 1-8. ISSN 0045-6535

Yazdani, Sepideh and Yusof, Rubiyah and Karimian, A. and Pashna, Mohsen and Hematian, Amirshahram (2015) Image segmentation methods and applications in MRI brain images. IETE Technical Review (Institution of Electronics and Telecommunication Engineers, India), 32 (6). pp. 413-427. ISSN 0256-4602

Yazid, I. I. M. and Mazlan, S. A. and Imaduddin, F. and Zamzuri, H. and Choi, S. B. and Kikuchi, T. (2016) An investigation on the mitigation of end-stop impacts in a magnetorheological damper operated by the mixed mode. Smart Materials and Structures, 25 (12). ISSN 0964-1726

Yazid, N. A. M. and Zaini, N. and Chelliapan, S. and Othman, N. and Mohammad, R. and Kamaruddin, S. A. and Nasri, N. S. (2017) Economic and efficiency indicators in non-revenue water (NRW) performance. International Journal of Civil Engineering and Technology, 8 (10). pp. 1419-1431. ISSN 0976-6308

Ya’acob, Suraya and Mohamad Ali, Nazlena and Mat Nayan, Norshita and Liang, Hai Ning and Ahmad, Ibrahim and Ibrahim, Roslina and Abu Bakar, Nur Azaliah (2019) Visual analytics evaluation process: Practice guidelines for complex domain. Malaysian Journal of Computer Science, 2019 (1). pp. 118-134. ISSN 0127-9084

Yee, L. K. and Ken, T. L. and Asako, Y. and Quen, L. K. and Liang, C. Z. and Syahidah, W. N. and Homma, K. and Arada, G. P. and Siang, G. Y. and Yen, T. W. and Sing, C. K. L. and Kamadinata, J. O. and Taguchi, A. (2019) Cloud optical depth retrieval via sky's infrared image for solar radiation prediction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). pp. 1-14. ISSN 2289-7879

Yee, Ling Ching and Ker, Yuek Li and Jumaat, Nurul Farhana (2022) A new lens to media competence of gender divide in digitalized era. Journal of ICT in Education (JICTIE), 9 (2). pp. 34-45. ISSN 2289-7844

Yee, M. J. and Mubarak, N. M. and Abdullah, E. C. and Khalid, M. and Walvekar, R. and Karri, R. R. and Nizamuddin, S. S. and Numan, A. (2019) Carbon nanomaterials based films for strain sensing application - a review. Nano-Structures and Nano-Objects, 18 . ISSN 2352-507X

Yee Mah, A. X. and Ho, W. S. and Hassim, M. H. and Hashim, H. and Liew, P. Y. and Asli, U. A. and Muis, Z. A. and Teck Ling, G. H. (2020) Optimization of hydrogen supply chain: a case study in Malaysia. Chemical Engineering Transactions, 78 . pp. 85-90. ISSN 2283-9216

Yeoh, Cheow Keat and Jamaludin, Shamsul Baharin and Ahmad, Zainal Arifin (2004) The effect of varying process parameters on the Microhardness and Microstru Cu-steel and Al-Al2o3 friction joints. Jurnal Teknologi, 41 . pp. 85-95. ISSN 2180-3722

Yeoh, S. H. and Satake, A. and Numata, S. and Ichie, T. and Lee, S. L. and Basherudin, N. and Muhammad, N. and Kondo, T. and Otani, T. and Hashim, M. and Tani, N. (2017) Unravelling proximate cues of mass flowering in the tropical forests of South-East Asia from gene expression analyses. Molecular Ecology, 26 (19). pp. 5074-5085. ISSN 0962-1083

Yew, H. T. and Supriyanto, E. and Satria, M. H. and Hau, Y. W. (2016) New vertical handover method to optimize utilization of wireless local area network in high-speed environment. PLoS ONE, 11 (11). ISSN 1932-6203

Yew, Y. P. and Shameli, K. and Miyake, M. and Ahmad Khairudin, N. B. and Mohamad, S. E. and Hara, H. and Mad Nordin, M. F. and Lee, K. X. (2017) An eco-friendly means of biosynthesis of superparamagnetic magnetite nanoparticles via marine polymer. IEEE Transactions on Nanotechnology, 16 (6). pp. 1047-1052. ISSN 1536-125X

Yi, Guo and Mohd. Zainuddin, Norziha Megat and Abu Bakar, Nur Azaliah (2021) Conceptual model on internet banking acceptance in China with social network influence. International Journal on Informatics Visualization, 5 (2). pp. 177-186. ISSN 2549-9904

Ying, S. Z. and Al-Shammari, N. K. and Faudzi, A. A. and Sabzehmeidani, Y. (2020) Continuous progressive actuator robot for hand rehabilitation. Engineering, Technology & Applied Science Research (Etasr), 10 (1). pp. 5276-5280. ISSN 2241-4487

Yong, W. N. and Liew, P. Y. and Alwi, S. R. W. and Klemeš, J. J. (2020) Combined cooling, heating and power integration for locally integrated energy sector. Chemical Engineering Transactions, 81 . pp. 949-954. ISSN 2283-9216

Yoong, Yen Kee and Asako, Yutaka and Tan, Lit Ken and Che Sidik, Nor Azwadi (2020) Uncertainty of temperature measured by thermocouple. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (1). pp. 54-62. ISSN 2289-7879

Yosri, M. H. and Muhamad, P. and Mohd. Yatim, N. F. (2019) Application of air ionizer to remove electrostatic discharge (esd) dust for plastics material in automotive painting process. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 29-57. ISSN 2289-7879

Yousefi, Amin Termeh and Bagheri, Samira and Shinji, Kawasaki and Mahmood, Mohamad Rusop and Ikeda, Shoichiro (2015) Highly oriented vertically aligned carbon nanotubes via chemical vapour deposition for key potential application in CNT ropes. Materials Research Innovations, 19 (3). pp. 212-216. ISSN 1432-8917

Yousefi, Amin Termeh and Tanaka, Hirofumi and Bagheri, Samira and Elfghi, Fawzi M. and Mahmood, Mohammad R. and Ikeda, Shoichiro (2015) Vectorial crystal growth of oriented vertically aligned carbon nanotubes using statistical analysis. Crystal Growth and Design, 15 (7). pp. 3457-3463. ISSN 1528-7483

Yousif, Ragheed Hussam and A. Wahab, Habibah and Shameli, Kamyar and Ahmad Khairudin, Nurul Bahiyah (2020) Exploring the molecular interactions between neoculin and the human sweet taste receptors through computational approaches. Sains Malaysiana, 49 (3). pp. 517-525. ISSN 0126-6039

Yousof, S and Idrees, M and Mohd Yusof, Mohd Rashid (1995) Analysis of wet acidic deposition in Petaling Jaya. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A17-1.

Yuan, W. and Talib, H. H. A. and Minghat, A. D. (2021) Quality assurance in higher education, a global perspective. Review of International Geographical Education Online, 11 (4). pp. 1682-1695. ISSN 2146-0353

Yuen, Chark See and Mohd. Noor, Norliza (2018) Face recognition using Complete Gabor Filter with Random Forest. ARPN Journal of Engineering and Applied Sciences, 13 (13). pp. 4102-4112. ISSN 1819-6608

Yui, K. and Ito, M. and Kobayashi, T. and Tsuji, T. and Kuramochi, H. (2018) Measurement and prediction of liquidus curves of saturated fatty acids and triglycerides plus fuel oil a systems. Kagaku Kogaku Ronbunshu, 44 (1). pp. 54-58. ISSN 0386-216X

Yui, Kazuko and Motoki, Toshiyuki and Kato, Humiaki and Kuramochi, Hidetoshi and Tsuji, Tomoya and Sakai, Shin ichi and Wania, Frank (2018) Measurement of Vapor Pressures and Melting Properties of Five Polybrominated Aromatic Flame Retardants. Journal of Chemical and Engineering Data, 63 (7). pp. 2578-2585. ISSN 0021-9568

Yunan, Mat Hussin (1989) Plugging due to fines migration in sandpacks. Buletin FKKKSA, 3 (2). pp. 39-46. ISSN 0128-0740

Yunan, Mat Hussin (1989) Determination of hydrocarbons volumetric fractions by a HP 5890A gas chromatograph. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 190-204.

Yunan, Mat Hussin (1989) Wettability effects on oil displacement behaviour. Buletin FKKKSA, 3 (1). pp. 43-47. ISSN 0128-0740

Yunan, Mat Hussin and Derahman, Mohd. Nawi and Idris, Ahmad Kamal (1992) Development of artificial porous media. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-1.

Yunan, Mat Hussin and Idris, Ahmad Kamal (1995) Role of asphaltene in changing wettability of reservoir rocks. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C12-1.

Yunus, Robiah and Wong, S.L. and Abdul Manan, Zainuddin (1995) Minimization of energy consumption in a cryogenic plant through process modification and optimization using a steady state process simulator. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C8-1.

Yusefi, M. and Chan, H. Y. and Teow, S. Y. and Kia, P. and Soon, M. L. K. (2021) 5-Fluorouracil encapsulated chitosan-cellulose fiber bionanocomposites: synthesis, characterization and in vitro analysis towards colorectal cancer cells. Nanomaterials, 11 (7). ISSN 2079-4991

Yusefi, M. and Shameli, K. and Ali, R. R. and Pang, S. W. and Teow, S. Y. (2020) Evaluating anticancer activity of plant-mediated synthesized iron oxide nanoparticles using punica granatum fruit peel extract. Journal of Molecular Structure, 1204 . ISSN 0022-2860

Yusefi, M. and Shameli, K. and Hedayatnasab, Z. and Teow, S. Y. and Ismail, U. N. and Azlan, C. A. and Ali, R. R. (2021) Green synthesis of Fe3O4 nanoparticles for hyperthermia, magnetic resonance imaging and 5-fluorouracil carrier in potential colorectal cancer treatment. Research on Chemical Intermediates, 47 (5). pp. 1789-1808. ISSN 0922-6168

Yusefi, Mostafa and Lee, Michiele Kiun Soon and Teow, Sin Yeang and Monchouguy, Elaine Irene and Mooneerah Neerooa, Bibi Noorheen Haleema and Izadiyan, Zahra and Jahangirian, Hossein and Moghaddam, Roshanak Rafiee and Webster, Thomas J. and Shameli, Kamyar (2022) Fabrication of cellulose nanocrystals as potential anticancer drug delivery systems for colorectal cancer treatment. International Journal of Biological Macromolecules, 199 (-). pp. 372-385. ISSN 0141-8130

Yushak, Mohamed Shamaun and Dolah, Rozzeta and Abu Bakar, Nooh (2018) Lean principles reduces resistance to change in transforming a shipyard operations. International Journal of Business and Society, 19 (S2). pp. 274-286. ISSN 1511-6670

Yusof, Ahmad Anas and Wan Ali, Wan Khairuddin and Abd. Rahman, Tharek and Ani, Farid Nasir (2005) Microwave And Reflection Properties Of Palm Shell Carbon-Polyester Conductive Composite Absorber. Jurnal Teknologi A (42A). pp. 59-74. ISSN 01274-9696

Yusof, Ahmad Anas and Wan Ali, Wan Khairuddin and Abd Rahman, Tharek and Ani, Farid Nasir (2005) Microwave and reflection properties of palm shell carbon–polyester conductive composite absorber. Microwave and reflection properties of palm shell carbon–polyester conductive composite absorber . pp. 59-74. ISSN 0127-9696

Yusof, E. M. M. and Othman, M. S. and Yusof, A. R. M. (2018) Operational dashboard: Accelerator for shop floor workers. International Journal of Engineering and Technology(UAE), 7 (2). pp. 4-6. ISSN 2227-524X

Yusof, N. and Tahir, A. A. and Riyadi, F. A. and Sabri, N. S. A. and Md. Akhir, F. N. and Othman, N. and Chin, K. L. and Tseng, K. Y. and Chin, S. T. and Zakaria, Z. and Lai, C. Y. and Hara, H. (2020) Complete genome sequence of lignin-degrading streptomyces sp. S6 isolated from oil palm plantation in Malaysia. Microbiology Resource Announcements, 9 (5). ISSN 2576-098X

Yusof, N. I. and Zainuddin, N. M. M. and Hassan, N. H. and Sjarif, N. N. A. and Yaacob, S. and Hassan, W. A. W. (2019) A guideline for decision-making on business intelligence and customer relationship management among clinics. International Journal of Advanced Computer Science and Applications, 10 (8). pp. 498-505. ISSN 2158-107X

Yusof, S. N. A. and Asako, Y. and Sidik, N. A. C. (2020) Computational analysis on the effect of size cylinder for the irreversible process in a piston-cylinder system using iced-ale method. CFD Letters, 11 (4). pp. 92-104. ISSN 2180-1363

Yusof, Siti Nurul Akmal and Basharie, Siti Mariam and Che Sidik, Nor Azwadi and Asako, Yutaka and Mohamed, Saiful Bahri (2021) Characterization of Crude Palm Oil (CPO), corn oil and waste cooking oil for biodiesel production. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 136-146. ISSN 2289-7879

Yusof, Siti Nurul Akmal and Che Sidik, Nor Azwadi and Asako, Yutaka and Aziz Japar, Wan Mohd. Arif and Mohamed, Saiful Bahri and Muhammad, Nura Mu’az (2021) A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE). Nanotechnology Reviews, 9 (1). pp. 1326-1349. ISSN 2191-9089

Yusof, Siti Nurul Akmal and Muhammad, Nura Mu'az and Aziz Japar, Wan Mohd. Arif and Asako, Yutaka and Hong, Chungpyo and Tan, Lit Ken and Che Sidik, Nor Azwadi (2022) Validity of performance factors used in recent studies on heat transfer enhancement by surface modification or insert devices. International Journal of Heat and Mass Transfer, 186 (122431). pp. 1-9. ISSN 0017-9310

Yusof, Z. and Rasid, Z. A. (2017) Parametric instability of laminated composite plates using third order shear deformation theory. Advanced Science Letters, 23 (5). pp. 4434-4438. ISSN 1936-6612

Yusoof, N. M. and Sulaiman, A. H. and Al-Mansoori, M. H. and Mahdi, M. A. (2020) Double pass remotely pumped l-band edfa with the integration of raman amplification using multiwavelength dispersion compensator. Optik, 210 . ISSN 0030-4026

Yusuf, Mohammed and Ali Khan, Moonis and Otero, Marta and Abdullah, E. C. and Hosomi, Masaaki and Terada, Akihiko and Riya, Shohei (2017) Synthesis of CTAB intercalated graphene and its application for the adsorption of AR265 and AO7 dyes from water. Journal of Colloid and Interface Science, 493 . pp. 51-61. ISSN 0021-9797

Yuzir, A. and Sabri, A. and Tijani, H. and Abdullah, N. and Shreeshivadasan, C. (2017) Qualitative methods to identify potential strains for partial degradation of oil palm mesocarp fibre. Desalination and Water Treatment, 89 . pp. 280-286. ISSN 1944-3994

Yuzir, A. and Yaacob, S. S. and Tijani, H. I. and Abdullah, N. and Ahmed, Z. (2017) Addition of ferric chloride in anaerobic digesters to enhance sulphide removal and methanogenesis. Desalination and Water Treatment, 79 . pp. 64-72. ISSN 1944-3994

Z., Othman and W.A., Wan Abdul Aziz and M.T., Roslina (2002) Preliminary studies of the ionospheric effect from the ionospheric regions using GPS permanent tracking stations. Jurnal teknikal dan kajian sosial, 2 (1). pp. 138-144. ISSN 1675-2228

Zahoor, Furqan and Hussin, Fawnizu Azmadi and Ahmad Khanday, Farooq and Ahmad, Mohamad Radzi and Mohd. Nawi, llani and Ooi, Chia Yee and Rokhani, Fakhrul Zaman (2021) Carbon nanotube field effect transistor (CNTFET) and resistive random access memory (RRAM) based ternary combinational logic circuits. Electronics (Switzerland), 10 (1). pp. 1-20. ISSN 2079-9292

Zaidi, Norsyahirah Izzati and Abd. Rahman, Nurul Huda and Yahya, Mohamad Faizul and Nordin, Muhammad Shakir Amin and Subahir, Suhaila and Yamada, Yoshihide and Majumdar, Abhijit (2022) Analysis on bending performance of the electro-textile antennas with bandwidth enhancement for wearable tracking application. IEEE Access, 10 (NA). pp. 31800-31820. ISSN 2169-3536

Zailan, Nur Athirah and Azizan, Muhammad Mokhzaini and Hasikin, Khairunnisa and Mohd. Khairuddin, Anis Salwa and Khairuddin, Uswah (2022) An automated solid waste detection using the optimized YOLO model for riverine management. Frontiers in Public Health, 10 (NA). pp. 1-14. ISSN 2296-2565

Zain, Mohamed and Rose, Raduan Che and Abdullah, Iskandar and Masrom, Maslin (2005) The relationship between information technology acceptance and organizational agility in Malaysia. Information and Management, 42 . pp. 829-839. ISSN 03787206

Zainal, N. A. and Kamarudin, M. R. and Yamada, Y. and Seman, N. (2017) Radiation pattern performance of unequally linear arrays with parasitic element. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 110-115. ISSN 2502-4752

Zainal, N. A. and Yamada, Y. and Kamarudin, M. R. (2016) Low sidelobe and wideband characteristics of density tapered arrays for 5G mobile systems. Jurnal Teknologi, 78 (6-2). pp. 71-76. ISSN 0127-9696

Zainal Abidin, Mohamad Hafizat and Suchaad, Saravid and Mashiko, Koichiro and Ismail, Nordinah (2019) Ethereum blockchain network implementation for IoT platform. International Journal of Integrated Engineering, 11 (7). pp. 1-6. ISSN 2229-838X

Zainal Alam, Muhd. Nazrul Hisham and Razali, Firdausi (2005) Scale-Up Of Stirred And Aerated BioengineeringTM Bioreactor Based On Constant Mass Transfer Coefficient. Jurnal Teknologi F (43F). pp. 95-110. ISSN 0127-9696

Zainal Ariffin, N. H. and Mohammad Haniff, M. A. S. and Syono, M. I. and Mohamed, M. A. and Hamzah, A. A. and Hashim, A. M. (2021) Low-temperature nitrogen doping of nanocrystalline graphene films with tunable pyridinic-n and pyrrolic-n by cold-wall plasma assisted chemical vapor deposition. ACS Omega, 6 (37). ISSN 2470-1343

Zainal Ariffin, Nur Hamizah and Mohammad Haniff, Muhammad Aniq Shazni and Syono, Mohd. Ismahadi and Mohamed, Mohd. Ambri and Hamzah, Azrul Azlan and Hashim, Abdul Manaf (2021) Low-temperature nitrogen doping of nanocrystalline graphene films with tunable Pyridinic-N and Pyrrolic-N by cold-wall plasma-assisted chemical vapor deposition. ACS Omega, 6 (37). pp. 23710-23722. ISSN 2470-1343

Zaini, Nabilah and Nor Kamarudin, Khairul Sozana (2018) Effect of concentration on amine-modified kenaf as a sorbent for carbon dioxide adsorption in a pressure swing adsorption system. Chemengineering, 2 (2). pp. 1-13. ISSN 2305-7084

Zainol Abidin, Muhammad Nidzhom and Nasef, Mohamed Mahmoud and Veerman, Joost (2022) Towards the development of new generation of ion exchange membranes for reverse electrodialysis: A review. Desalination, 537 (NA). pp. 1-21. ISSN 0011-9164

Zainuddin, Khairulazhar and Setan, Halim and Majid, Zulkepli (2009) From laser point cloud to surface : data reduction procedure test. Geoinformation Science Journal, 9 (2). pp. 1-9. ISSN 1511-949

Zainuddin, Zainal and Hope, Peter and Newton, Michael and Sacco, Paul and Nosaka, Kazunori (2005) Effects of partial immobilization after eccentric exercise on recovery from muscle damage. Journal of Athletic Training, 40 . 197 -202. ISSN 10626050

Zainudin, A. A. and Yunus, N. A. and Mazlan, S. A. and Shabdin, M. K. and Aziz Abdul, S. A. and Nordin, N. A. and Nazmi, N. and Rahman, M. A. A. (2020) Rheological and resistance properties of magnetorheological elastomer with cobalt for sensor application. Applied Sciences (Switzerland), 10 (5). ISSN 2076-3417

Zainudin, Afiq Azri and Mazlan, Saiful Amri and Shabdin, Muhammad Kashfi and Abdul Aziz, Siti Aishah and Homma, Koji and Nazmi, Nurhazimah and Nordin, Nur Azmah and Noordin, Ahmad Faiz and Rambat, Shuib (2021) Effects of magnetic field and particles content on rheology and resistivity behavior of magnetorheological elastomer with embedded cobalt particles. Smart Materials and Structures, 30 (5). 055002-055002. ISSN 0964-1726

Zainudin, B. H. and Wong, T. W. and Hamdan, H. (2018) Design of low molecular weight pectin and its nanoparticles through combination treatment of pectin by microwave and inorganic salts. Polymer Degradation and Stability, 147 . pp. 35-40. ISSN 0141-3910

Zainudin, Norsiha and Abdul Latef, Tarik and Aridas, Narendra Kumar and Yamada, Yoshihide and Kamardin, Kamilia and Abd. Rahman, Nurul Huda (2020) Increase of input resistance of a normal-mode helical antenna (NMHA) in human body application. Sensors (Switzerland), 20 (4). p. 958. ISSN 1424-8220

Zakaria, Zainal and Abd. Rahman, Mohd Norani and Raju, G. (1993) Kajian komposisi gas petroleum cecair di Malaysia. Seminar Penyelidikan Fakulti Kejuruteraan Kimia & Kejuruteraan Sumber Asli . pp. 1-3.

Zakaria, Zainal and Yusoff, Nor Maizura (1995) Pengaruh silinder terhadap baki gas petroleum cecair di Malaysia. Buletin Fakulti Kejuruteraan Kimia & Kejuruteraan Sumber Asli, 9 (1). pp. 42-48. ISSN 0128-0740

Zakaria, Zalmiyah and Deris, Safaai (2001) Penyelesaian Masalah Penjadualan Dinamik Dengan Menggunakan Pendekatan Taakulan Berasaskan Kes. Jurnal Teknologi D (35D). pp. 115-132. ISSN 0127-9696

Zakaria, N. J. and Zamzuri, H. and Ariff, M. H. and Shapiai, M. I. and Saruchi, S. A. and Hassan, N. (2018) Fully convolutional neural network for Malaysian road lane detection. International Journal of Engineering & Technology, 7 (4.11). pp. 152-155. ISSN 2227-524X

Zakaria, Noor Jannah and Shapiai, Mohd. Ibrahim and Fauzi, Hilman and Elhawary, Hossamelden Mohamed Amin and Yahya, Wira Jazair and Abdul Rahman, Mohd. Azizi and Abu Kassim, Khairil Anwar and Bahiuddin, Irfan and Mohammed Ariff, Mohd. Hatta (2020) Gradient-based edge effects on lane marking detection using a deep learning-based approach. Arabian Journal for Science and Engineering, 45 (12). pp. 10989-11006. ISSN 2193-567X

Zakaria, Nor Hidayati (2014) Towards a model of e-government services adoption among employees in developing countries. Journal Of Information Systems Innovation (JISRI), 8 . pp. 66-74. ISSN 2289-1358

Zakaria, Rozana and Mohd. Said, Mohd. Ismid and Yang, Jay and Yahya, Khairulzan and Haron, Zaiton (2009) Indoor environment sustainability of residential-industrial housing in Malaysia. Malaysian Journal of Civil Engineering, 21 (1). pp. 98-109. ISSN 1823-7843

Zakaria, Zainal and Abd Rahman, Mohd Norani and G., Raju and Nasir, Abu Samah and Ramlee, Mohd Redhuan (1994) Rekabentuk komposisi gas petroleum cecair di dalam selinder mudahalih. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Zakaria, Zainal and Abd Rahman, Mohd Norani and Lim, Seng Chuan (1995) Faktor keserentakan-kepentingan dalam sistem pengagihan gas. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C13-1.

Zakaria, Zainal and Zainal Abidin, Shahrul Azman and Abdul Rahman, Mohd. Norani (1992) Analisa rangkaian pengagihan gas menggunakan kaedah Hardy Cross. Buletin FKKKSA, 6 (1). pp. 43-50. ISSN 0128-0740

Zakeri, M. and Nasef, M. M. and Kargaran, T. and Ahmad, A. and Abouzari Lotf, E. and Asadi, J. (2017) Synthesis of pyrano2,3-cpyrazoles by ionic liquids under green and eco-safe conditions. Research on Chemical Intermediates, 43 (2). pp. 717-728. ISSN 0922-6168

Zakeri, M. and Nasef, M. M. and Kargaran, T. and Ahmad, A. and Abouzari-Lotf, E. and Asadi, J. (2017) Synthesis of pyrano[2,3-c] pyrazoles by ionic liquids under green and eco-safe conditions. Research on Chemical Intermediates, 43 (2). pp. 717-728. ISSN 0922-6168

Zaki, N. M. and Deris, Safaai and Md Illias, Rosli (2005) Protein sequences classification based on weighting scheme. International Journal of Computer, the Internet and Management, 13 (1). pp. 50-60.

Zaki, Nazar M. and Deris, Safaai and Illias, Rosli Md (2005) Application of string kernels in protein sequence classification. Applied Bioinformatics, 4 . pp. 45-52. ISSN 11755636

Zaki, S. A. and Damiati, S. A. and Rijal, H. B. and Hagishima, A. and Abd. Razak, A. (2017) Adaptive thermal comfort in university classrooms in Malaysia and Japan. Building and Environment, 122 . pp. 294-306. ISSN 0360-1323

Zaki, S. A. and Hagishima, A. and Fukami, R. and Fadhilah, N. (2017) Development of a model for generating air-conditioner operation schedules in Malaysia. Building and Environment, 122 . pp. 354-362. ISSN 0360-1323

Zaki, S. A. and Othman, N. E. and Syahidah, S. W. and Yakub, F. and Muhammad-Sukki, F and Ardila-Rey, J. A. and Shahidan, M. F. and Saudi, A. S. M. (2020) Effects of urban morphology on microclimate parameters in an urban university campus. Sustainability, 12 (7).

Zaki, S. A. and Rosli, M. F. and Rijal, O. B. and Sadzli, F. N. H. and Hagishima, A. and Yakub, F. (2021) Effectiveness of a cool bed linen for thermal comfort and sleep quality in air-conditioned bedroom under hot-humid climate. Sustainability (Switzerland), 13 (16). ISSN 2071-1050

Zaki, S. A. and Syahidah, S. W. and Shahidan, M. F. and Ahmad, M. I. and Yakub, F. and Hassan, M. Z. and Daud, M. Y. M. (2020) Assessment of outdoor air temperature with different shaded area within an urban university campus in hot-humid climate. Sustainability (Switzerland), 12 (14). ISSN 2071-1050

Zaki, S. A. and Jaafar, A. Z. and Mohammad, A. F. and Ali, M. S. M. and Abd. Razak, A. (2016) Investigation of surface roughness impact on mean wind flow using RNG k-e model. Jurnal Teknologi, 78 (9). pp. 21-28. ISSN 0127-9696

Zaki, Sheikh Ahmad and Mat Hanip, Nur Fadhilah and Hagishima, Aya and Yakub, Fitri and Mat Ali, Mohamed Sukri (2018) Survey of resident behaviour related to air conditioner operation in low-cost apartments of Kuala Lumpur. Chemical Engineering Transactions, 63 . pp. 259-264. ISSN 2283-9216

Zakuan, F. R. A. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Ismail, N. H. F. and Zakariya, M. S. and Zulkepli, K. A. and ZulfaqarAzmi, M. (2017) Threat assessment algorithm for Active Blind Spot Assist system using short range radar sensor. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4270-4275. ISSN 1819-6608

Zaman, Asyraf and Muhtazaruddin, Mohd. Nabil and Muhamad, Sallehuddin and Bani, Nurul Aini and Mohd. Aris, Siti Armiza and Abd. Fatah, Abdul Yasser (2018) Hazard control management on optimization layout of vent stack at offshore platform. Journal Of Advanced Research In Occuptional Safety And Health, 1 (1). pp. 11-18. ISSN 2637-0255

Zamani, Mazdak and Shohreh, Honarbakhsh and Roza, Honarbakhsh (2012) Dynamic monitoring in ad hoc network. Applied Mechanics and Materials, 229-31 . pp. 1481-1486. ISSN 1662-7482

Zamri, G. B. and Azizal, N. K. A. and Nakamura, S. and Okada, K. and Nordin, N. H. and Othman, N. Á. and MD Akhir, F. N. and Sobian, A. and Kaida, N. and Hara, H. (2020) Delivery, impact and approach of household food waste reduction campaigns. Journal of Cleaner Production, 246 . ISSN 0959-6526

Zareei, M. and Muzahidul Islam, A. K. M. and Baharun, S. and Vargas Rosales, C. and Azpilicueta, L. and Mansoor, N. (2017) Medium Access Control Protocols for Cognitive Radio Ad Hoc Networks: A Survey. Sensors (Switzerland), 17 (9). ISSN 1424-8220

Zaw, Thiha and Abu, Aminudin and Fawazi, Noor and Wahab, A. M. (2018) Effects of parameters of Helmholtz resonator on transmission loss of hybrid muffler. International Journal of Engineering & Technology, 7 (3.17). pp. 151-157. ISSN 2227-524X

Zawadzki, P. and Muhammad Sukki, F. and Abu Bakar, S. H. and Bani, N. A. and Mas’ud, A. A. and Ardila-Rey, J. A. and Munir, A. B. (2020) Life cycle assessment of a rotationally asymmetrical compound parabolic concentrator (RACPC). Sustainability, 12 (11). ISSN 2071-1050

Zayid, S. and Bakar, N. A. A. and Valachamy, M. and Malek, N. S. A. and Yaacob, S. and Hassan, N. H. (2020) A formulation of big data analytics model in strengthening the disaster risk reduction. Journal of Environmental Treatment Techniques, 8 (1). pp. 481-487. ISSN 2309-1185

Zeinali, M. and Mazlan, S. A. and Choi, S. B. and Imaduddin, F. and Hamdan, L. H. (2016) Influence of piston and magnetic coils on the field-dependent damping performance of a mixed-mode magnetorheological damper. Smart Materials and Structures, 25 (5). ISSN 0964-1726

Zeti, Azura M. H. and Shamsir, Mohd S. and Tajul-Arifin, Khairina and Merican, Amir F. and Mohamed, Rahmah and Nathan, Sheila and Mahadi, Nor Muhammad and Napis, Suhaimi and Tan, Tin W. (2009) Bioinformatics in Malaysia : hope, initiative, effort, reality, and challenges. PLoS Computational Biology, 5 (8). e1000457. ISSN 1553-7358

Zhang, Cheng and Sjarif, Nilam N. A. and Ibrahim, Roslina (2022) Decision fusion for stock market prediction: A systematic review. IEEE Access, 10 (NA). pp. 81364-81379. ISSN 2169-3536

Zhang, Xuemei and Centeno, Anthony and Wu, Xu and Ryan, Mary P. and Alford, Neil M. and Riley, D. Jason and Xie, Fang (2016) Significant broadband photocurrent enhancement by Au-CZTS core-shell nanostructured photocathodes. Scientific Reports, 6 . ISSN 2045-2322

Zoveidavianpoor, M. and Gharibi, A. (2016) Characterization of agro-waste resources for potential use as proppant in hydraulic fracturing. Journal of Natural Gas Science and Engineering, 36 . pp. 679-691. ISSN 1875-5100

Zubair, Nur Afifah and Moawia, Rihab Musaad and Nasef, Mohamed Mahmoud and Hubbe, Martin and Zakeri, Masoumeh (2022) A critical review on natural fibers modifications by graft copolymerization for wastewater treatment. Journal of Polymers and the Environment, 30 (4). pp. 1199-1227. ISSN 1572-8900

Zubair, Nur Afifah and Nasef, Mohamed Mahmoud and Mohamad, Noor Ashikin and Abouzari-Lotf, Ebrahim and Ting, Teo Ming and Abdullah, Ezzat Chan (2020) Kinetic studies of radiation induced grafting of N-vinylformamide onto polyethylene/polypropylene fibrous sheets and testing its hydrolysed copolymer for CO2 adsorption. Radiation Physics and Chemistry, 171 . p. 108727. ISSN 0969-806X

Zuber, M. A. and Yahya, W. J. and Ithnin, A. M. and Sugeng, D. A. and Kadir, H. A. and Ahmad, M. A. (2020) A brief review of palm oil liquid waste conversion into biofuel. Environmental Reviews, 28 (1). pp. 67-76. ISSN 1181-8700

Zuhari, Zuhairah and Low, Sheau-Ting (2019) Indoor thermal comfort in university classroom: a case of Universiti Teknologi Malaysia. International Journal of Real Estate Studies, 13 (2). pp. 34-41. ISSN 1823-8505

Zuhri, M. Y. M. and Nasrudin, M. A. and Nasrodin, M. A. M. and Sapuan, S. M. and Hassan, M. Z. (2021) Mechanical properties under quasi-static loading of the core made of flax/poly(lactic acid) composite. Polimery/Polymers, 66 (3). pp. 193-197. ISSN 0032-2725

Zuikafly, S. N. F. and Ahmad, H. and Wan Nawawi, W. M. F. and Yahaya, H. and Ibrahim, M. H. and Latif, A. A. and Ahmad, F. (2021) Graphene-chitin bio-composite polymer based mode locker at 2 micron region. Optik, 245 (NA). pp. 1-12. ISSN 0030-4026

Zuikafly, S. N. F. and Ahmad, F. and Ibrahim, M. H. and Latiff, A. A. and Harun, S. W. (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Zulbadli, Nazlina and Zaini, Nabilah and Lim, Yew Soon and Teng, Yong Kang and Ali Al-Harf, Ahmed Abdulkarim and Nasri, Noor Shawal and Nor Kamarudin, Khairul Sozana (2018) Acid-modified adsorbents from sustainable green-based materials for crude oil removal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 11-20. ISSN 2289-7879

Zulfikhri, Muhammad and Kamaruddin, Samira Albati (2019) Awareness of legislation for hand-dug caisson work in highway construction. Journal of Advanced Research in Occupational Safety and Health, 4 (1). pp. 13-21. ISSN 2637-0255

Zulkania, A. and Pramudono, B. and Mat, Hanapi and Idris, A. K. and Mohd. Manan, M. (2001) Malaysian crude oil emulsions:1.physical and chemical characterizations. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 435-442.

Zulkarnain, N. and Zamzuri, H. and Saruchi, S. A. and Hussain, A. and Mokri, S. S. and Jedi, A. and Razali, N. and Mohd. Nordin, I. N. A. (2018) Optimised combinatorial control strategy for active anti-roll bar system for ground vehicle. International Journal of Engineering & Technology, 7 (4.11). pp. 140-144. ISSN 2227-524X

Zulkarnain, Siti Hafsah and Tsujimura, Maki and Yuzir, Muhamad Ali and Razali, Muhammad Najib and Tarmidi, Zakri (2020) A review of climate change (floods) and economic attributes response to residential property value in Malaysia. Journal of Water and Climate Change, 11 (4). pp. 1084-1094. ISSN 2040-2244

Zulkarnain, Zulkarnain and Zamzuri, Hairi and Ariff, M. H. M. and Abdul Hamid, Umar Zakir (2018) Path tracking on autonomous vehicle for severe maneuvre. Telkomnika (Telecommunication Computing Electronics and Control), 16 (4). pp. 1583-1589. ISSN 1693-6930

Zulkepli, K. A. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Zakaria, M. A. and Azmi, M. Z. and Zakuan, F. R. A. and Ismail, N. H. F. and Zakariya, M. S. (2017) I-Drive: Modular system architecture and hardware configuration for an intelligent Vehicle research platform. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4259-4264. ISSN 1819-6608

Zulkepli, Majid and Setan, Halim and Chong, Albert K. (2009) Accuracy assessments of point cloud 3D registration method for high accuracy craniofacial mapping. Geoinformation Science Journal, 9 (2). pp. 36-44. ISSN 1511-9491

Zulkifle, Haneef and Yusof, Fadhilah and Mohd. Nor, Siti Rohani and Samsudin, Nurul Syuhada (2022) Modelling period effect of lee-carter mortality model with SETAR model. Journal Of Statistical Modeling & Analytics, 4 (2). pp. 28-42. ISSN 2180-3102

Zulkifli, N. Z. and Husain, M. K. A. and Zaki, N. I. M. (2019) Awareness of the hazardous gas detection system implementation for the major industries in Malaysia. International Journal of Civil Engineering and Technology, 10 (2). pp. 1254-1262. ISSN 0976-6308

Book Section

A. K., Khairuldean and T., Chiong Ing and Che Kob, Mohd. Salman and Budianto, Aries and Sumintono, Bambang and Tawi, Kamarul Baharin and Samion, Syahrullail (2012) Extreme pressure properties investigation of palm olein using four ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 920-927. ISBN 978-073541032-9

Abd. Khalid, Harith Fadzilah and Azri, Nor Suhaibah and Abdul Rahman, Alias (2008) Managing 3D spatial objects. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 15-28. ISBN 978-983-52-0584-3

Abdul Hamid, Muhammad Fariq and Abdul Rahim, Zulhasni (2022) Construction 4.0 readiness and challenges for construction skills training institutions in Malaysia. In: Advances on Intelligent Informatics and Computing Health Informatics, Intelligent Systems, Data Science and Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 697-706. ISBN 978-3-030-98740-4

Abdul Kadir, Mohammed Rafiq and Heidari, M. and Fallahiarezoodar, A. and Alizadeh, M. (2011) Stress distribution analysis on semi constrained elbow prosthesis during flexion and extension motion. In: 5th Kuala Lumpur International Conference on Biomedical Engineering 2011. Springer, Kuala Lumpur, pp. 215-218. ISBN 978-364221728-9

Abdul Rahim, Sharul Kamal and Peter, Gardner (2008) Smart antenna beamforming network. In: Recent Developments In Small Size Antenna. Penerbit UTM, Johor, pp. 23-31. ISBN 978-983-52-0640-5

Abdul Rahim, Zulhasni and Abdul Rahman, Nor Azian and Iqbal, Muhamad Saqib (2022) The National Industry 4.0 Policy performance review based on Industry4WRD readiness assessment and intervention program. In: Advances on Intelligent Informatics and Computing Health Informatics, Intelligent Systems, Data Science and Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 688-696. ISBN 978-3-030-98740-4

Abdul Rahman, Alias and Chen, Tet Khuan and Azri, Nor Suhaibah and Buyuksalih, Gurcan (2008) Developing 3D geo DBMS for terrestrial laser scanning data. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 29-54. ISBN 978-983-52-0584-4

Abdullah, Shahrum Shah and Ishaque, K. and Saleem, Y. and Amjad, M. and Rashid, M. (2011) Single input fuzzy logic controller for magnetic levitation system. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, Kuala Lumpur, pp. 1-6. ISBN 978-145770003-3

Abu, Aminudin and Yunus, Mohd. Azmi and Abdul Rani, Muhammad Norhisham and Othman, Nor Azizi (2008) On the sensitivity analysis of dynamic characteristics for structural modification. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 1-17. ISBN 978-983-52-0563-7

Abu Bakar, Norsharina and Shamsuddin, Siti Mariyam (2009) United zernike invariants for character images. In: Visual Informatics: Bridging Research and Practice: First International Visual Informatics Conference, IVIC 2009 Kuala Lumpur, Malaysia, November 11-13, 2009 Proceedings. Springer, Berlin/ Heidelberg, pp. 498-509. ISBN 978-3-642-05035-0

Abu Bakar, Suhaimi and Saleh, Abd. Latif (2008) Verification of weibull's theory of brittle fracture for local timber loaded in tension parallel to grain. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM, Johor, pp. 1-10. ISBN 978-983-52-0567-5

Adbull Hamed, Haza Nuzly and Kasabov, Nikola and Michlovsky, Zbynek and Shamsuddin, Siti Mariyam (2009) String pattern recognition using evolving spiking neural networks and quantum inspired particle swarm optimization. In: Neural Information Processing: 16th International Conference, ICONIP 2009, Bangkok, Thailand, December 1-5, 2009, Proceedings, Part II. Lecture Notes in Computer Science . Springer, Berlin/ Heidelberg, pp. 611-619. ISBN 978-3-642-10682-8

Ahmad, Fadzilah and Mohamad, Dzulkifli (2009) Fingerprint classification based on analysis of singularities and image quality. In: Visual Informatics: Bridging Research and Practice. Springer, Berlin/ Heidelberg, pp. 551-560. ISBN 978-3-642-05035-0

Ahmed Almhab, Ayoub and Busu, Ibrahim (2008) Estimation of evapotranspiration with modified SEBAL model using Landsat-TM and NOAA-AVHRR images in arid mountains area. In: Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008. Institute of Electrical and Electronics Engineers, New York, 350-355 . ISBN 978-076953136-6

Ali, Jalil and Punthawanunt, S. and Jomtarak, R. and Teeka, C. and Yupapin, P. P. (2011) Single electron-hole pair generation using dark-bright solitons conversion control. In: The 2nd International Science, Social Science, Engineering and Energy Conference 2010 (I-SEEC 2010). Elsevier, pp. 228-230. ISBN 978-073540897-5

Ali, Mohd. Tarmizi and Abd. Rahman, Tharek and Kamarudin, Muhammad Ramlee and Md. Tan, Mohd. Nor (2008) A reconfigurable aperture planar array antenna based on separated feeding network. In: Ecti-Con 2008: Proceedings Of The 2008 5Th International Conference On Electrical Engineering/Electronics, Computer, Telecommunications And Information Technology. Institute of Electrical and Electronics Engineers, New York, 225-228 . ISBN 978-142442101-5

Alismaili, Saleh Nasser Rashid and Shanmugam, Mohana and Kasim, Hairol Adenan and Magalingam, Pritheega (2021) Hospital information system for motivating patient loyalty: a systematic literature review. In: Innovative Systems for Intelligent Health Informatics. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). Springer Science and Business Media Deutschland GmbH, NA, pp. 189-198. ISBN 978-3-030-70712-5

Alismaili, Saleh Nasser Rashid and Shanmugam, Mohana and Kasim, Hairol Adenan and Magalingam, Pritheega (2021) A modified UTAUT model for hospital information systems geared towards motivating patient loyalty. In: Innovative Systems for Intelligent Health Informatics : Data Science, Health Informatics, Intelligent Systems, Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). Springer, Cham, NA, pp. 207-216. ISBN 978-3-030-70712-5

Almhab, Ayoub and Busu, Ibrahim (2009) Estimation of evapotranspiration using fused remote sensing image data and energy balance model for improving water management in arid area. In: 2009 International Conference on Computer Engineering and Technology. Article number 4769659, 2 . IEEE, pp. 529-533. ISBN 978-076953521-0

Araghi, Tanya Koohpayeh and Alarood, Ala Abdulsalam and Araghi, Sagheb Kohpayeh (2021) Analysis and evaluation of template based methods against geometric attacks: A survey. In: Innovative Systems for Intelligent Health Informatics Data Science, Health Informatics, Intelligent Systems, Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 807-814. ISBN 978-3-030-70712-5

Binwahlan, Mohammed Salem and Salim, Naomie and Suanmali, Ladda (2009) Swarm diversity based text summarization. In: Neural Information Processing. Springer, Berlin/ Heidelberg, pp. 216-268. ISBN 978-3-642-10682-8

Chan, Y. H. and Syed Abu Bakar, Syed Abdul Rahman (2004) Face detection system based on feature-based chrominance colour information. In: Proceedings International Conference On Computer Graphics, Imaging And Visualization. International Conference on Computer Graphics Imaging and Visualization . IEEE, USA, pp. 153-158. ISBN ISBN: 0769521789; 978-076952178-7

Chia, Yee Ooi (2008) Design for testability I: from full scan to partial scan. In: Advances In Microelectronics. Penerbit UTM, Skudai, Johor Bahru, pp. 94-121. ISBN 978-983-52-0654-2

Chia, Yee Ooi and Paraman, Norlina (2008) Design for testability II: from high level perspective. In: Advances In Microelectronics. Penerbit UTM, Skudai, Johor Bahru, pp. 122-136. ISBN 978-983-52-0654-2

Choon, Tan Liat and Abdul Rahman, Alias (2008) An overview of strata and stratum objects for Malaysian 3D cadastre. In: Advances toward 3D GIS. Penerbit UTM , Johor, pp. 243-260. ISBN 978-983-52-0584-19

Daud, Rohaizan and Hussein, Surya Sumarni and Ab. Rahim, Nor Zairah and Ibrahim, Roslina and Ya’acob, Suraya and Abu Bakar, Nur Azaliah (2022) Knowledge communication in government ICT projects: A cross-case analysis study. In: Knowledge Management in Organisations 16th International Conference, KMO 2022, Hagen, Germany, July 11–14, 2022, Proceedings. Communications in Computer and Information Science, 1593 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 79-90. ISBN 978-303107919-1

Daud, S. M. and Daud, S. and Rasol, Z. and Hassan, N. A. (2011) Do Malaysians use ICT tools when listened to their preferred music? In: 2011 International Conference on Communication and Industrial Application (ICCIA). IEEE Explorer, USA, pp. 1-6. ISBN 978-1-4577-1915-8

Dobrovolny, Michal and Benes, Jakub and Krejcar, Ondrej and Selamat, Ali (2022) Sperm-cell detection using YOLOv5 architecture. In: Bioinformatics and Biomedical Engineering 9th International Work-Conference, IWBBIO 2022, Maspalomas, Gran Canaria, Spain, June 27–30, 2022, Proceedings, Part II. Lecture Notes in Computer Science, 13347 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 319-330. ISBN 978-303107801-9

Erfaneh, Noroozi and Mohd. Daud, Salwani and Ali, Sabouhi and Abas, Hafiza (2012) A new dynamic hash algorithm in digital signature. In: Advanced Machine Learning Technologies and Applications: First International Conference, AMLTA 2012, Cairo, Egypt, December 8-10, 2012. Proceedings. Communications in Computer and Information Science, VIII . Springer Berlin Heidelberg, Netherlands, pp. 583-589. ISBN 978-3-642-35325-3

Fahami, S. M. H. and Zamzuri, Hairi and Mazlan, Saiful Amri and Zakaria, M. A. (2012) Modeling and simulation of vehicle steer by wire system. In: SHUSER 2012 - 2012 IEEE Symposium on Humanities, Science and Engineering Research. IEEE, New York, USA, pp. 765-770. ISBN 978-146731310-0

Farnaz, Towhidi and Abdul Manaf, Azizah and Mohd. Daud, Salwani and Arash, Habibi Lashkari (2011) The knowledge based authentication attacks. In: Proceedings Of The 2011 International Conference On Security & Management. CSREA Press, USA, pp. 1-5. ISBN 1-60132-196-1

Ghazali, Masitah and Ashraf, Mahmood (2011) Towards natural interaction with wheelchair using Nintendo Wiimote controller. In: Communications in Computer and Information Science. Springer, Kuantan, Pahang, pp. 231-245. ISBN 978-364222202-3

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza (2020) An efficient fog-based attack detection using ensemble of MOA-WMA for internet of medical things. In: Innovative Systems for Intelligent Health Informatics Data Science, Health Informatics, Intelligent Systems, Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 72 (NA). Springer, Cham, Cham, Switzerland, pp. 774-785. ISBN 978-3-030-70712-5

Haron, Habibah Norehan and Shaharoun, Awaluddin Mohamed (2011) Self-regulated learning, students' understanding and performance in engineering statics. In: 2011 IEEE Global Engineering Education Conference, EDUCON 2011. IEEE, Amman, pp. 450-459. ISBN 978-1-61284-643-9

Hassan, Muhammad Imzan and Ahmad Nasrudin, Mohd. Hasif and Abdul Rahman, Alias (2008) An integrated Malaysian 3D cadastre. In: Advances toward 3D GIS. Penerbit UTM , Johor, pp. 217-230. ISBN 978-983-52-0584-17

Husain, Abdul Rashid and Ahmad, Mohamad Noh and Shah, M. B. N. (2011) Static sliding mode controller for permanent magnet stepper motor with disturbances. In: InECCE 2011 - International Conference on Electrical, Control and Computer Engineering. IEEE, Pahang, pp. 520-525. ISBN 978-161284229-5

Idris, Ahmad Kamal and Ikhsan, Azman and Ismail, Issham (1997) Kejuruteraan petroleum : prinsip dan amalan. In: Petroleum engineering : principles and practice. Penerbit UTM, Skudai, Johor. ISBN 983-52-0091-2

Idrus Sutan Nameh, Sevia Mahdaliza and Hassin, Ahmad Farid (2008) Wireless internet connection in Malaysia. In: Communication Services In Malaysia. Penerbit UTM, Johor, pp. 25-29. ISBN 978-983-52-0657-3

Ismail, Ima Rashidah and Daruis, Rusni and Abdul Manaf, Azizah and Mohd. Daud, Salwani (2012) An overview of digital preservation strategies for cultural heritages. In: Advanced Informatics 1. Issues in Advanced Informatics 1. (In Press)

Ismail, Issham and Samsuri, Ariffin (2000) Petroleum geology. In: Asas petroleum. Penerbit UTM. ISBN 983-52-0193-5

Ismail, Kamarulafizam and Shaikh Salleh, Sheikh Hussain and Yahya, Zuraimi and Jamaludin, Mohd. Najeb and Ganesah, J. (2007) Wireless heart sound data acquisition using bluetooth. In: Recent Advancement In Biomedical Engineering. Penerbit UTM , Johor, pp. 63-71. ISBN 978-983-52-0559-0

Ismail, Abdul Razak and Hamid, Mohd. Fauzi and Abdul Manan, Muhammad (1998) Prestasi reservoir. In: Prinsip pengeluaran tenaga minyak. Penerbit UTM, Skudai, Johor Bahru, Malaysia, pp. 1-11. ISBN 983-52-0096-3

Ismail, Issham (2003) Operasi pelengkapan telaga. In: Operasi pelengkapan telaga (well completion operation). Penerbit UTM, Skudai, Johor Bahru, Malaysia. ISBN 983-52-0299-0

Iwamoto, K. and Shiraiwa, Y. (2016) Accumulation of cesium by aquatic plants and algae. In: Impact of Cesium on Plants and the Environment. Springer International Publishing, pp. 171-185. ISBN 978-331941524-6

Khalil, Mohammed S. and Muhammad, Dzulkifli and Khan, Muhammad Khurram and Alghathbar, Khaled (2010) Fingerprint verification based on statistical analysis. In: 2010 5th International Conference on Future Information Technology. Institute of Electrical and Electronics Engineers, New York, pp. 1-5. ISBN 978-142446950-5

Khiabani, H. and Idris, Norbik Bashah and Ab. Manan, J. L. (2012) Leveraging remote attestation to enhance the unified trust model for WSNs. In: Proceedings 2012 International Conference on Cyber Security, Cyber Warfare and Digital Forensic, CyberSec 2012. IEEE, New York, USA, pp. 139-143. ISBN 978-146731425-1

Krishnan, Santhana and Md. Din, Mohd. Fadhil and Mat Taib, Shazwin and Kamaludin, Norfarah Hanim and Hanafi, Norhisyam and Ida, Tamio and Shamsuddin, Mohd. Suhaizan and Chelliapan, Shreeshivadasan (2019) Conversion of landscapewaste into bio-coke solid fuel. In: Green Engineering for Campus Sustainability. NA, NA (NA). Springer, Singapore, NA, pp. 105-118. ISBN 978-981-13-7259-9

M. Yassin, Abu Azam and Ismail, Abdul Razak and Othman, Ariff and Hashim, Ayob and Kamis, Azmi and Hamid, M. Fauzi and Abdul Manan, Muhammad and Shahrudin, Shahrin and Hassan, Zulkafli (1988) Oil well: brief description. In: Oilwell Drilling Engineering: Principles and Practice. Penerbit UTM, Skudai, Johor Bahru, Malaysia.

Manzo, K. and Padfield, R. (2016) Neoliberal colonialism?: A postcolonial reading of "land grabbing" in Africa. In: The Postcolonial World. Taylor and Francis Inc., pp. 509-525. ISBN 978-131529769-9

Mashinchi, M. Hadi and Shamsuddin, Siti Mariyam (2009) Three-term fuzzy back-propagation. In: Foundations of Computational Intelligence Volume 1: Learning and Approximation. Studies in Computational Intelligence . Springer, Berlin/ Heidelberg, pp. 143-158. ISBN 978-3-642-01081-1

Masrom, M. (2016) E-government, e-surveillance, and ethical issues from Malaysian perspective. In: Ethical Issues and Citizen Rights in the Era of Digital Government Surveillance. IGI Global, pp. 249-263. ISBN 978-146669906-9

Matsumoto, Mitsutaka and Chinen, Kenichiro and Jamaludin, Khairur Rijal and Mohd. Yusoff, Badli Shah (2021) Barriers for remanufacturing business in Southeast Asia: The role of governments in circular economy. In: EcoDesign and Sustainability I Products, Services, and Business ModelsProduction, Life Cycle Engineering and Management. Sustainable Production, Life Cycle Engineering and Management, NA (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 151-161. ISBN 978-981-15-6778-0

Md. Yassin, Abu Azam and Mohd. Arshad, Azmi and Ismail, Issham (1997) Well completion practices. In: Well completion practices. UTM Publisher, Skudai, Johor Bahru, Malaysia, pp. 1-31.

Mohamad, Alias and A. Rahman, Khairul Azlan (2008) WiMAX coverage in Malaysia. In: Wireless Communication Technology In Malaysia. Penerbit UTM, Johor, pp. 102-116. ISBN 978-983-52-0656-6

Mohamad, Alias and Mawari, Hamzah (2008) WCDMA in Malaysia. In: Wireless Communication Technology In Malaysia. Penerbit UTM, Johor, pp. 96-101. ISBN 978-983-52-0656-6

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob and Ismail, Wan Ruslan (2008) Influence of georeference for GIS based saturation excess overland flow modelling. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 313-334. ISBN 978-983-52-0584-22

Mohamad Zulkifli, Siti Nur Awanis and Abdul Rahman, Alias (2008) Managing 3D spatial objects using geo DBMS and microstation geographics. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 55-64. ISBN 978-983-52-0584-5

Mohd. Amin, Shamsudin and Abdul Rashid, Husain and Sanhoury, I. M. H. (2011) Trajectory tracking of steering system mobile robot. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE, Kuala Lumpur, pp. 1-5. ISBN 978-161284435-0

Mohd. Buang, Mohd. Farid and Mohd. Daud, Salwani (2012) A web-based KM system for digital forensics – knowledge sharing capability. In: 2012 International Conference on Multimedia Computing and Systems (ICMCS). IEEE Explorer, pp. 528-533. ISBN 978-1-4673-1518-0

Mohd. Daud, Salwani (2010) Indeks bi’ah salihah and komunikasi maya. In: Kelestarian Sistem Pendidikan Bersepadu: Model Pusat Pendidikan Al-Amin, JIMedia. n/a. ISBN 970-983-9782-76-9

Mohd. Isa, Mohd. Fuad and Ab. Rahim, Nor Zairah and Fathi, Mohamad Syazli and Mohd. Yusoff, Rasimah Che (2022) Extending the occupational Safety and Health Management System as a Knowledge Management System through the mixed-reality remote audit. In: Knowledge Management in Organisations 16th International Conference, KMO 2022, Hagen, Germany, July 11–14, 2022, Proceedings. Communications in Computer and Information Science, 1593 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 270-278. ISBN 978-303107919-1

Mohd. Noor, Siti Nur Aishah and Mohd. Tobi, Siti Uzairiah and Fathi, Mohamad Syazli (2022) Content validity index: competencies of quantity surveyors and enabling technologies in Industry 4.0. In: Proceedings of the 3rd International Conference on Green Environmental Engineering and Technology IConGEET 2021, Penang, Malaysia. Lecture Notes in Civil Engineering, 214 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 87-93. ISBN 978-981167919-3

Mohd. Osman, Mohd. Hassan and Boocock, Grahame (2008) Business strategy as determinant of growth among high technology small medium enterprises. In: Technology Management: Theory And Practice. Penerbit UTM , Johor, pp. 189-212. ISBN 978-983-52-0688-7

Mohd. Supa'at, Abu Sahmah and Chan, Poh Kam (2008) Wireless optical communication in Malaysia. In: Communication Services In Malaysia. Penerbit UTM, Johor, pp. 44-52. ISBN 978-983-52-0657-3

Naumar, Yusnita Rahayu and Abd. Rahman, Tharek and Ngah, Razali (2008) Small slotted UWB antenna based on current distribution for bandwidth enhancement. In: Recent Developments In Small Size Antenna. Penerbit UTM, Johor, pp. 15-22. ISBN 978-983-52-0640-5

Ngah, Ibrahim (2009) Rural development. In: Malaysia's Economy, Past, Present & Future. Malaysian Strategic Research Centre, Kuala Lumpur, pp. 23-60. ISBN 978-983-9783-21-6

Norazli, O. and Noor Ezlin, A. B. and Muhd. Noor, M. Y. and Shreeshivadasan, C. and Nor’azizi, O. (2013) The integrated solid waste management system: its implementation and impacts towards the environment. In: Causes, Impacts and Solutions to Global Warming. Springer New York, pp. 657-673. ISBN 978-146147588-0

Perumal, Sundresan and Tabassum, Mujahid and Samy, Ganthan Narayana and Ponnan, Suresh and Ramamoorthy, Arun Kumar and Sasikala, K. J. (2021) Cybercrime issues in smart cities networks and prevention using ethical hacking. In: Data-Driven Mining, Learning and Analytics for Secured Smart Cities Trends and Advances. Advanced Sciences and Technologies for Security Applications, NA (NA). Springer, Cham, NA, pp. 333-358. ISBN 978-3-030-72138-1

Puteh, Fatimah (2009) The computer is in the learners' hands: are we preparing our teacher-trainees enough for the digital age? In: Call for Teachers. Penerbit UTM Press, Skudai, Johor, pp. 1-12. ISBN 978-983-52-0716-7

Puteh, Fatimah (2009) The integration of ICT in a language classroom: are teachers the ultimate arbiters? In: Call for Teachers. Penerbit UTM Press, Skudai, Johor, pp. 23-30. ISBN 978-983-52-0716-7

Ramli, Mohd. Zamri (2007) Vulnerability study of public buildings subjected to earthquake by ATC-21, ATC-22 and finite element modeling. In: Advances in Earthquake Engineering Application. Penerbit UTM, Johor, pp. 35-48.

Sallehuddin, Roselina and Shamsuddin, Siti Mariyam and Mustafa, Noorfa Haszlinna (2012) Enhancing forecasting performance of multivariate time series using new hybrid feature selection. In: Communications in Computer and Information Science. Springer-Verlag, Berlin, pp. 373-380. ISBN 978-364231836-8

Sanusi, Sazlina Azwa and Tan, Rachel and Nordin, Nor Akmar (2009) Consumer acceptance of a new product: food packaging using a smart bio-switch concept. In: The Essentials of Marketing Principles. Penerbit UTM Press, Skudai, Johor, pp. 59-70. ISBN 978-983-52-0718-1

Sarijari, Mohd. Adib and Abd. Rahim, Mohd. Rozaini and Mahalin, Nur Hija (2008) ZigBee based multi-hop wireless communication for home security and automation system. In: Applications And System Design For Wireless Sensor Network. Penerbit UTM, Johor, pp. 1-11. ISBN 978-983-52-0658-0

Shahid Khan, Adnan and Hayat, Imran and Fisal, Norsheila (2008) Wireless sensor network gateway to satellite network. In: Applications And System Design For Wireless Sensor Network. Penerbit UTM, Johor, pp. 70-81. ISBN 978-983-52-0658-0

Shaikh Salleh, Sheikh Hussain and Ting, C. M. and Ariff, A. K. and Kamarulafizam, I. and Suraya, R. A. and Hussain, H. (2011) Speaker verification using Gaussian mixture model (GMM). In: 2011 5th Kuala Lumpur International Conference on Biomedical Engineering - IFMBE Proceedings. Springer, Kuala Lumpur, pp. 560-564. ISBN 978-364221728-9

Shanmugam, Bharanidhran and Idris, Norbik Bashah (2005) Artificial intelligence techniques applied to intrusion detection. In: Proceedings of INDICON 2005: An International Conference of IEEE India Council. IEEE, pp. 52-55.

Shuen Chuan, Tan and Setan, Halim and Majid, Zulkepli (2007) Simple three-dimensional craniofacial surface measurement. In: Geoinformation Technology For Craniofacial Anthropometric Mapping. Penerbit UTM , Johor, pp. 96-111. ISBN 978-983-52-0582-8

Suwaibah, Subli and Salwani, Mohd. Daud and Rusni, Daruis (2012) A conceptual framework for the criteria of a halal web browser. In: Advanced Informatics 1. Issues in Advanced Informatics 1. (In Press)

Syed Othman, Syed Muhammad Nazir and Abdul Rahim, Zulhasni (2022) Construction 4.0 intervention in quality assessment system in construction’s implementation. In: Advances on Intelligent Informatics and Computing Health Informatics, Intelligent Systems, Data Science and Smart Computing. Lecture Notes on Data Engineering and Communications Technologies, 127 (NA). Springer Science and Business Media Deutschland GmbH, Cham, Switzerland, pp. 713-722. ISBN 978-3-030-98740-4

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Ismail, A. (2011) Simultaneous targeting and design for non-mass transfer based water and energy reduction. In: Proceedings - 3rd International Conference on Computational Intelligence, Communication Systems and Networks, CICSyN 2011. IEEE, Kuala Lumpur, pp. 1-8. ISBN 978-145770003-3

Yaacob, Marizan and Mohd. Daud, Salwani (2012) Novel binary search algorithm for fast tag detection in robust and secure RFID systems. In: Advanced Machine Learning Technologies and Applications: First International Conference, AMLTA 2012, Cairo, Egypt, December 8-10, 2012. Proceedings. Communications in Computer and Information Science, VIII . Springer Berlin Heidelberg, Netherlands, pp. 575-582. ISBN 978-3-642-35325-3

Yu, K. D. S. and Aviso, K. B. and Aziz, M. K. A. and Morad, N. A. and Promentilla, M. A. B. and Santos, J. R. and Tan, R. R. (2015) Inoperability input-output modeling approach to risk analysis in biomass supply chains. In: Process Development and Resource Conservation for Biomass Conversion. Wiley Blackwell, pp. 183-213. ISBN 978-111869914-0

Yusof, Rubiyah and Ahmad, Azlin and Mohd. Khairuddin, Anis Salwa and Khairuddin, Uswah and Nik Azmi, Nik Mohamad Aizuddin and Rosli, Nenny Ruthfalydia (2020) Transfer learning approach in automatic tropical wood recognition system. In: Mechanisms and Machine Science. Springer, pp. 1225-1233. ISBN 978-3-030-27052-0

Zamani, Mazdak and Abdul Manaf, Azizah and Daruis, Rusni (2012) Azizah technique for efficiency measurement in steganography. In: Proceedings - ICIDT 2012, 8th International Conference on Information Science and Digital Content Technology. AICIT, Busan, Korea, pp. 480-484. ISBN 978-898867869-5

Zamzuri, Hairi and Zainal Abidin, Mastura Shafinaz and Ramli, M. S. A. (2011) Tracking human movement in office environment using video processing. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, Kuala Lumpur, pp. 1-6. ISBN 978-145770003-3

Monograph

A. Kadir, Abd. Majid and Desa, Ghazali (2003) Land administration for land surveyors. Documentation. Fakulti Kejuruteraan Sains Dan Geoinformasi, Fakulti Kejuruteraan Sains Dan Geoinformasi.

Abdul Hamid, Abu Bakar and Hashim, Noor Hazarina (2007) Purchasing in corporate strategic planning. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Tamin, Mohd. Nasir and Lee, Faisal Abidin (2007) Interface micromotion failure simulation of cementless hip prosthesis. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Latiff, Nurul Mu'azzah and Syed Yusof, Sharifah Kamilah and Nik Abdul Malik, Nik Noordini (2010) Mobile base station for wireless sensor networks using particle swarm optimization. Project Report. Fakulti Kejuruteraan Elektrik, Skudai, Johor. (Unpublished)

Abdul Rahman, Alias (2005) Developing three dimensional topological model for 3D GIS. Project Report. Faculty of Geoinformation Science and Engineering, Skudai, Johor. (Unpublished)

Abdul Razak, Noor Zainab and Ibrahim, Noor Mala and Mohd. Omar, Abidah and Attan, Anie and Abdullah, Khairi Izwan and Awang, Zubaidah (2006) The communicative performance of UTM Graduates : employers' and employees' expectations and assessment. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ahmad, Supian (2002) Satu kajian mengenai pengunaan teleworking di Malaysia: kajian kes, metropolitan Klang Valley. Project Report. UTM. (Unpublished)

Amirudin, Roslan (2003) An integrated construction safety system: a knowledge based system approach. Project Report. UTM. (Unpublished)

Buyong, Taher and Daud, Abdullah (2001) The conjugate gradient method for the adjustment of cadastral data in GIS. Project Report. UTM. (Unpublished)

Buyong, Taher and Ismail, Suriatini (2001) The application of low cost GIS package for property valuation. Project Report. UTM. (Unpublished)

Buyong, Taher and Tang, Chuoon Mun (2001) Soil erosion analysis using prime meridian GIS package. Project Report. UTM. (Unpublished)

Dilshan, Remaz Ossen and Abdul Majid, Roshida and Ahmad, Mohd. Hamdan (2008) Tropical design principles for comfortable indoor climate. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Gofar, Nurly and Kassim, Azman (2008) Mechanics of rainfall infiltration through soil slope. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Hamdan, Abdul Rahim and Abdul Ghaffar, Mohamed Najib and Sihes, Ahmad Johari and Ramli, Jamaluddin (2008) Taksonomi gaya pembelajaran dan tingkat motivasi pelajar dewasa. Project Report. Faculty of Education, Skudai, Johor. (Unpublished)

Hashim, Mohamad Ghazali and Majid, Zulkepli and Sipan, Ibrahim @ Atan and Abdul Aziz, Intan Sajidah (2003) Development of river data model using object orientation concept. Project Report. UTM. (Unpublished)

Ismail, Zamri and Said, Mohamad Nor (2004) GIS application for school information and management system. Project Report. UTM. (Unpublished)

Kamaruddin, Khairul Hisyam (2005) Rural sustainability: an examination of the practice of sustainable development principle among indigenous communities in interior rural Malaysia. Project Report. UTM. (Unpublished)

Kamarudin, Md. Nor and Mat Amin, Zulkarnaini and Latef, Mohd. Zulkafle and Mohamad, Azrinda Hassan (2006) The integration of Global Positioning Systems (GPS) and surveying packages for near real-time flood monitoring system. Project Report. Faculty of Geoinformation Science and Engineering (FKSG), Skudai, Johor. (Unpublished)

Kamarudin, Md. Nor and Wan Mohd. Akib , Wan Abdul Aziz and Che Awang, Mohamad Saupi and Mohd. Zaki , Mohd. Zahlan and Subari, Mustafa Din (2006) The Integration of Global Positioning System (GPS) and meteorological observations for tropospheric model development in Malaysian region. Project Report. UTM. (Unpublished)

Khalid, Abd. Ghani (2008) Cost forecasting model for building projects. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Mahamud, Rosadah and Hussein, Khadijah (2001) Kajian ke atas keupayaan membeli rumah bagi golongan sederhana di kawasan Johor Bahru. Project Report. UTM. (Unpublished)

Mardi, Ahmad Shahlan and Fadzil @ Zulkifli, Abu Bakar (2000) Pengenalan kepada Oseanografi (Bahagian 1). Documentation. Fakulti Kejuruteraan Sains Dan Geoinformasi, Fakulti Kejuruteraan Sains Dan Geoinformasi.

Masrom, Maslin and Ismail, Zuraini and Hussein, Ramlah (2008) Computer ethics awareness among undergraduate students in Malaysian higher education institutions. Working Paper. University of Canterbury, The Rydges Christchurch, New Zealand. (Submitted)

Mat Ariff, Shahidah (2007) Pengaturcaraan Fortran untuk jurukur. Documentation. FKSG, UTM Skudai, FKSG.

Md. Ariff, Mohd. Shoki and Khalifah, Zainab and Mohamad Sirin, Rosnah and Sulong, Norzarina and Ali, Maimunah and Omar, Noor Abidah and Abdul Rahman, Hamidah (2006) Pembangunan dan pelaksanaan sistem pengurusan kualiti menggunakan model proses untuk Universiti Pendidikan Sultan Idris. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Nor, Khalil and Wan Ismail, Wan Khairuzzaman and Bahari, Ahamad Zaidi (2011) A linkage between organizational culture and knowledge management. A model development. Project Report. Faculty of Management and Human Resource Development, Skudai, Johor. (Unpublished)

Md. Som, Zainal Abidin (2001) The adoption and modelling of non-geodetic observation data for the purpose of deformation analysis. Project Report. UTM. (Unpublished)

Md. Som, Zainal Abidin (2005) Software development for deformation detection using geodetic methods. Project Report. UTM. (Unpublished)

Mohammad, Mohammad Tahir Sabit and Mar Iman, Abdul Hamid and Omar, Ismail (2005) An ideal financial mechanism for the development of Waqf properties in Malaysia. Project Report. UTM. (Unpublished)

Mohammed, Miswan @ Abdul Hakim (2005) Pembentukan kerangka kerja amalan terbaik bagi pengurusan harta tanah pihak berkuasa tempatan (PBT). Project Report. UTM. (Unpublished)

Mohd. Ali, Hishamuddin and Alias, Buang and Daud, Dzulkarnian @ Dzulkarnain (2004) Determination of fair rental value of higher learning institution (HLI) properties : a case study of Universiti Teknologi Malaysia. Project Report. UTM. (Unpublished)

Mohd. Omar, Kamaludin and Ses, Shahrum and Mohamed, Azhari (2004) Rapid monitoring system for the National Geodetic Vertical Datum (NGVD). Project Report. UTM. (Unpublished)

Mohd. Omar, Kamaludin and Subari, Mustafa Din (2004) Study towards real time precise point positioning systems using GPS engine receiver. Project Report. UTM. (Unpublished)

Mohd. Omar, Kamaludin and Ses, Shahrum and Mohamed, Azhari (2003) Enhancement of height system for Malaysia using space technology: the study of the datum bias inconsistencies in Peninsular Malaysia. Project Report. Faculty of Geoinformation Science and Engineering (FKSG). (Unpublished)

Mokhtar, Nor Aieni and Kassim, Azman and Gofar, Nurly (2004) Combining design methodologies for the development of a practical and effective approach to erosion control systems. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Oliver, Valentine Eboy (2004) The impact of attachment (site location) and view characteristics on the rental and open market values of commercial property (case study: shophouses in selected areas in Johor Bahru. Project Report. UTM. (Unpublished)

Omar, Abdullah Hisam and Abdul Mukhshin, Ruzaimi and Abd. Kadir, Abd. Majid and Teng, Chee Boo and Sidek, Rosni Zamuddin Shah and Keling, Noraidah and Saat, Norzalina and Abd. Aziz, Hartini and Yahaya, Noor Anim Zanariah and Muhd. Sahapini, Noor Fadhilah and Buang, Megat Khairun (2006) Development of automated cadastral database selection and visualization system to support the realization of modern cadastrate in malaysia. Project Report. Faculty of Geoinformation Science And Engineering, Skudai, Johor. (Unpublished)

Omar, Ismail (2005) Study of adequate compensation for land- strengths and weaknessess of traditional comparison method of valuation in land acquisition projects. Project Report. UTM. (Unpublished)

Othman, Asiah and Abdul Rahim, Razani and Husin, Khadijah (2001) Implikasi pencerobohan tanah tanah kerajaan dan cadangan penyelesaian. Project Report. UTM. (Unpublished)

Salim, Naomie and Shamsuddin, Siti Mariyam and Salleh @ Sallehuddin, Roselina and Alwee, Razana (2006) Development of compound clustering techniques using hybrid soft-computing algorithms. Project Report. Faculty of Computer Science and Information System, Skudai, Johor. (Unpublished)

Sapri, Maimunah and Mohammed, Abdul Hakim and Baba, Maizan (2003) Developing automated energy saving system for building. Project Report. UTM. (Unpublished)

Selamat, Harihodin and Mohd. Rahim, Mohd. Shafry and Daman, Daut (2004) An intelligent data mapping for hydrological information system (his) cube data base to cater from various data types. Project Report. Faculty of Computer Science and Information System, Skudai, Johor. (Unpublished)

Ses, Sahrum (1999) Pengenalan kepada Bahasa Pengaturcaraan C. Documentation. Fakulti Kejuruteraan & Sains Geoinformasi, Fakulti Kejuruteraan & Sains Geoinformasi.

Sunar, Mohd. Shahrizal and Daman, Daut and Kari, Sarudin and Mohd. Suaib, Norhaida and Bade, Abdullah (2005) The development of cloud modelling and motion analysis for virtual environment. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Ali, Wan Khairuddin (2002) Wideband microstrip antennas for cars and commercial vehicle modern communication system. Project Report. Faculty of Mechanical Engieering, Skudai, Johor. (Unpublished)

Yaacob, Zulkefli and Abdul Majid, Zulkifli (1998) Natural gas motorcycle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yahya, Yazriwati and Nik Mahamood, Nik Maria (2006) Study of techniques of class schedule/timetable retrieval via SMS for students convenience. Project Report. Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Zahedi, Gholamreza and Abdul Mana, Zainuddin (2010) Simulation and optimization of heavy oil cracking (HOC) unit using neural network and genetic algorithm. Project Report. Sustainability, Skudai, Johor. (Unpublished)

Zainal, Anazida and Kamat, Maznah and Kadir, Rasidah and Mat Din, Mazura (2007) Ubiquitous database in mobile healthcare. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaluddin, Khairur Rijal and Mat Nor, F. (2014) The influence of SS316l foam fabrication parameter using powder metallurgy route. In: 5th International Conference on Material and Manufacturing Technology, ICMMT 2014, 8-9 May, 2014, Kuala Lumpur, Malaysia.

Jasni, Nur Afiqah Husna and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Abdullah, Mundzir and Wan Nawawi, Wan Mohd. Fazli and Yahaya, Hafizal (2020) Graphene-based saturable absorber for passive Q-switching erbium doped fiber laser. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE 2020, 28 - 29 July 2020, Kuala Lumpur, Malaysia.

Chan, J. Z. and Ali, R. Rasit and Shameli, K. and Salleh, M. S. N. and Lee, K. X. and Mohamed Isa, E. D. (2020) Green synthesis of gold nanoparticles using aqueous extract of Clitoria Ternatea flower. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Salleh, M. S. N. and Rasit Ali, R. and Shameli, K. and Hamzah, M. Y. and Chan, J. Z. (2020) Silver nanoparticles on pullulan derived via gamma irradiation method: A preliminary analysis. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Rizuan, Norhaniza and Nordin, Nur Azmah and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Abdul Aziz, Siti Aishah (2020) Uniform dispersion of carbonyl iron particles in bulk magnetorheological flexible foam. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Nasir, M. S. R. M. and Khairunnisa, M. P. and Jusoh, N. W. C. and Jalil, A. A. (2020) Enhanced carbon dioxide adsorption by amine-modified KCC-1. In: 2nd International Conference on Civil and Environmental Engineering, CENVIRON 2019, 20-21 Nov 2019, Langkawi, Kedah, Malaysia.

Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Ibrahim, Mohd. Haniff and Harun, Sulaiman Wadi (2017) Passively Q-switched of EDFL employing multi-walled carbon nanotubes with diameter less than 8 nm as saturable absorber. In: 2017 International Conference on Applied Photonics and Electronics, InCAPE 2017, 9 - 10 August 2017, Port Dickson, Negeri Sembilan, Malaysia. (Submitted)

Mat Noor, F. and Jamaludin, K. R. and Ahmad, S. (2017) Fabrication of porous stainless steel 316l for biomedical applications. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2017, 22 - 23 July 2017, Langkawi, Kedah.

Jasmi, Kamarul Azmi (2018) Membina Reputasi Pensyarah Pendidikan Islam Melalui Laman Web Researchgate. In: Bengkel Membina Reputasi Pensyarah Melalui ResearchGate, 16hb Ogos 2017, Makmal Komputer.

Muhammad Azrin, Muhammad Fiqri and Moorthy, Vishnukumar Krishna and Jasmi, Kamarul Azmi (2019) Media Sosial dan Perhubungan Sesama Manusia Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Nor Jefri, Nurul lzzaty and Shaharin, Nuraisyah Syakirin and Jasmi, Kamarul Azmi (2019) Media Sosial dan Pembentukan Masyarakat Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Nik Lah, Nik Muhammad Izzudin and Kumaran, Pulavendran Vijaya and Jasmi, Kamarul Azmi (2019) Media Sosial dan Impak kepada Perkembangan Bahasa Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Moktar, Noor Athirah and Abdul Halim, Areen Sherryna and Jasmi, Kamarul Azmi (2019) Media Sosial dan Kaedah Pengajaran Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

A. Aziz, Nur’ Afiqah and Lokman, Muhammad Quisar and Harun, Sulaiman Wadi and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2022) Zinc oxide nanoparticles-chitin as saturable absorber in erbium-doped fiber laser. In: 9th IEEE International Conference on Photonics, ICP 2022, 8 - 10 August 2022, Kuala Lumpur, Malaysia.

A. Bakar, Nur Azaliah and Selamat, Harihodin and Kama, Nazri (2017) Enterprise architecture implementation model: Measurement from experts and practitioner perspectives. In: 4th IEEE International Colloquium on Information Science and Technology, CiSt 2016, 24 - 26 October 2016, Tangier-Assilah, Morocco.

A. H. M., Din and K., Omar (2009) Derivation of sea level anomaly using satellite altimeter. In: Proceeding of 2009 East Asia Hydrographic Symposium & Exhibition (EAHSE), 2009, The Legend Hotel, Kuala Lumpur.

A. Kadir, Abd. Majid and Ses, Shahrum and Desa, Ghazali and Omar, Kamaludin and Omar, Abdullah Hisam and Chen, Kah Eng and Wong, Yeak Kuan (2001) Current trend in geoinformation technology. In: Studies Toward the Development of Implementation Plan of Coordinated Cadastral System For Malaysia. (Unpublished)

A. Kamaludeen, Rahma and Sulaiman, Shahida and Cheah, Yu-N (2011) Expert-based decision support framework for software reengineering. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Md. Illias, Rosli and Hassan, Osman (2005) Determination of fouling mechanisms in enzymatic membrane reactor (EMR) for cyclodextrins production based on Resistance-In Series Model. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Md. Illias, Rosli and Hassan, Osman (2005) Development of enzymatic membrane reactor (EMR) for cyclodextrins production. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

A. Majid, Nabihah and M. Juperi, Norfarain and Jasmi, Kamarul Azmi (2018) Tamadun Melayu Islam dan Pencapaian Teknologi. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

A. Majid, Siti Nuruljannah and Musa, Tajul Ariffin and Setan, Halim and Musliman, Ivin Amri (2008) Network analysis for GPS UTMnav system: preliminary stage. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

A. Manan, Zainuddin and Muis, Zarina (2005) Use of mundane analogies as an effective tool for teaching and learning. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

A. Rahim, Mohamad Kamal and D. Bala, Bashir and Murad, N. A and Ismail, M. F. and Majid, H. A. (2012) Design and analysis of metamaterial antenna using triangular resonator. In: 2012 Asia-Pacific Microwave Conference (APMC 2012), 4-7 Dec 2012, Ambassador Hotel Kaohsiung Kaohsiung, Taiwan.

A. Rasid, Zainudin and Hassan, Mohamad Zaki and Yahaya, Hafizal and Mahmud, Jamaluddin and Yusof, Zarina (2018) Dynamic instability response of smart composite material. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering.

A. Samah, Azurah and Wah, Lau Kee and Desa, Muhammad Ishak and Abdul Majid, Hairudin and Mohd. Azmi, Nurulhuda Firdaus and Salleh, Nordin and Abu Bakar, Azilina and Manual, Adilius (2014) Decision support system using system dynamics simulation modelling for projection of dentist supply. In: 2014 International Conference on Computer Assisted System in Health (CASH 2014), 19-21 Dec, 2014, Putrajaya, Malaysia.

Ab. Aziz, Nor Azlina and Ibrahim, Zuwairie and Abdul Aziz, Nor Hidayati and Mubin, Marizan and Mokhtar, Norrima and Shapiai, Mohd. Ibrahim (2019) A fitness-based adaptive synchronous-asynchronous switching in simulated kalman filter optimizer. In: 2019 International Conference on Computer and Information Sciences, ICCIS 2019, 3 - 4 April 2019, Sakaka, Saudi Arabia.

Ab. Halim, M. H. and Nor Anuar, A. and Ujang, Z. and Bob, M. M. (2015) Aerobic granulation for real domestic sewage treatment at hot and low humidity climate condition. In: The 2nd IWA Malaysia Young Water Professionals Conference 2015 (YWP15), 17-20 March, 2015, Kuala Lumpur, Malaysia.

Abas, N. and Ishak, R. and Syed Abd Rahman, S. A. and Bani, N. A. and Md. Sarkan, H. and Mad Kaidi, H. and Haron, H. @ N. (2019) Integrating and enhancing mathematical knowledge in Jelebu secondary schools. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur, Malaysia.

Abd Hamid, Abu Bakar and Mohd. Taib, Mohd. Zafrullah and Abdul Razak, A. H. N. and Embi, Mohamed Rashid (2018) The barriers and causes of building information modelling usage for interior design industry. In: 1st International Conference on Architecture and Civil Engineering, ICACE 2017, 8 May 2017 through 9 May 2017, Armada Hotel Petaling Jaya, Malaysia.

Abd. Samad, Azman and Ayob, Zahidah (2012) In vitro propagation and flavonoid contents in local justicia gendarussa Burm. F. In: 11th International Annual Symposium on Sustainability Science and Management (UMTAS 2012), Kuala Terengganu, Terengganu, Malaysia, 9-11 Jul 2012.

Abd. Baki, Tisiyanah and Noordin, Badriyah and Mohamed, Norliza and Idrus, Sevia Mahdaliza and Abd. Rasid, Siti Zaleha (2022) Digitalization of airside operations process to improve airport operations for the case of Malaysia airports. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Abd. Karim, Fatin Fazira and Mohamad, Shaza Eva and Iwamoto, Koji (2021) Initial study on the growth of haematococus pluvialis for astaxanthin production. In: 1st International Conference on Biomass Utilization and Sustainable Energy 2020, ICoBiomasSE 2020, 15 - 16 December 2020, Virtual, Online.

Abd. Khalid, Harith Fadzilah and Azri, Nor Suhaibah and Abdul Rahman, Alias (2008) Geo-DBMS : data management of 3D spatial objects. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abd. Latif, Salehuddin and Khairuddin, Uswah and Mohd. Khairuddin, Anis Salwa (2022) Development of Machine Vision System for Riverine Debris Counting. In: 6th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2021, 1 - 3 December 2021, Virtual, Kedah, Malaysia.

Abd. Rahim, N. and Mohamed, Z. and Amrin, A. and Mohammad, R. (2019) Women's dual roles and career growth: a preliminary study of malaysian female talents in science, engineering and technology (SET). In: 2nd International Conference on Women in Science, Engineering and Technology, 17-19 July 2018, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Abd. Rahim, Noorlizawati and Tasir, Zaidatun and Amrin, Astuty and Mohamed, Zainai (2022) Entrepreneurial leadership in nonprofit organization: A case of Malaysian public university. In: 2022 IEEE Technology and Engineering Management Society Conference - Asia Pacific, TEMSCON-ASPAC 2022, 19 - 22 September 2022, Bangkok, Thailand.

Abd. Rahman, Amirah and Kamardin, Kamilia and Yamada, Yoshihide (2019) Electromagnetic waves propagation for hyperthermia application. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2019, 25 November 2019 - 27 November 2019, Melaka, Malaysia.

Abd. Rashid, Nor Suhada and Askari, Muhamad (2014) "Litter marks" around oil palm tree base indicating infiltration area of stemflow-induced water. In: National Seminar on Civil Engineering Research, 14-15 April, 2014, Johor Bahru, Malaysia.

Abd. Razak, Norhuda and Arshad, Khairil Anuar and Abd. Rahman, Ali and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2004) Artificial neural network modelling for the prediction of carbon surface area. In: The XXI Regional Conference on Solid State Science & Technology 2004, 12-13 October 2004, Hyatt Regency Kinabalu, Sabah, Malaysia.

Abd. Talib, Norfahana and Mohd. Setapar, Siti Hamidah and Asli, Umi Asiah and Pa'ee, Khairul Faizal and Len, Kelly Yong Tau and Mohd. Nasir, Hasmidah (2020) Silica removal by alkaline hydrogen peroxide treatment to enhance the conversion of rice straw to sugars. In: 4th International Conference on Green Chemical Engineering and Technology: Materials Science, GCET 2019, 1 - 2 October 2019, Melaka, Malaysia.

Abdul Aziz, Ramlan and Muhammad, N. A. I. and Taher, Z. M. (2005) Peningkatan kesejahteraan dan produktiviti komuniti dengan penggunaan rawatan alternatif serta penglibatan dalam industri herba. In: Konvensyen Kebangsaan Kecemerlangan Sosial dan Pembangunan Komuniti, 16-17 Mei 2005, Hotel Equatorial, Bandar Hilir Melaka.

Abdul Aziz, Ramlan and Muhammad, N. A. I. and Taher, Z. M. and Zainol, N. A. (2005) Penyelidikan semasa ke atas herba tempatan bagi mengekalkan kesihatan. In: Konvensyen Seni Rawatan Dan Kecantikan Secara Tradisi 2005, 5-6 Mac 2005, Kompleks Mawar, Johor Bharu.

Abdul Aziz, Ramlan and Saidi, Hamdani and Ripin, Adnan and Mohamed, Nor H. (1991) Feasibility of filtering crude palm oil slurry. In: Second Particulate Technology Conference PARTEC 91.

Abdul Aziz, Siti Aishah and Abdull Aziz, Mohd Syafiq and Shabdin, Muhammad Kashfi and Mazlan, Saiful Amri and Nordin, Nur Azmah and Yahaya, Hafizal and Mohd. Rosnan, Rizuan (2020) Rheological properties of Mg substituted cobalt nickel ferrite nanoparticles as an additive in magnetorheological elastomer. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Abdul Ghapar, Hafizza and Khairuddin, Uswah and Yusof, Rubiyah and Mohd. Khairuddin, Anis Salwa and Ahmad, Azlin (2021) New feature extraction for wood species recognition system via statistical properties of line distribution. In: 3rd International Conference on Electrical, Communication and Computer Engineering, ICECCE 2021, 12 - 13 June 2021, Kuala Lumpur, Malaysia.

Abdul Halim, Zainab Zakirah and Azmi, Dania Salsabila and Marni, Nurazmallail (2019) Media Sosial dan Trend Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019, 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Abdul Hamid, Muhammad Fariq and Abdul Rahim, Zulhasni (2022) Construction 4.0 readiness and challenges for construction skills training institutions in Malaysia. In: 6th International Conference of Reliable Information and Communication Technology (IRICT 2021), 22 - 23 December 2021, Virtual, Online.

Abdul Jalil, Aishah and Idris, Ani and Triwahyono, Sugeng and Tokuda, Masao (2004) Decontamination of chlorobenzene by electrochemical method. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan.

Abdul Jalil, Aishah and Kurono, Nobuhita and Takasugi, Shingo and Tokuda, Masao (2004) Facile preparation of highly reactive electrogenerated zinc. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies,UTM. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Takasugi, Shingo and Tokuda, Masao (2004) Efficient cross-coupling reaction of functionalized alkyl bromides with aryl halides by using electrochemical method. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Determination of optimum conditions in preparing highly reactive electrogenerated zinc by gas chromatograph. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Determination of structure of precursor of ibuprofen: purification and analysis. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Synthesis of precursor of anti-cancer drugs. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Tajuddin, Norhuda and Akhbar, Suffiyana and Idris, Ani and Triwahyono, Sugeng and Awang Panjang, Noor Fatimah and Tokuda, Masao (2005) Effect of mediator on decontamination of chloroaromatic compounds by using electrochemical method. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Kurono, Nobuhito and Tokuda, Masao (2005) Effect of mediator on preparation of highly reactive electrogenerated zinc and its use in cross coupling reaction. In: International Advanced Technology Congress 2005 (ACTi 05), 6-8 Disember 2005, IOI Marriott Hotel, Putrajaya, Kuala Lumpur. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Kurono, Nobuhito and Tokuda, Masao (2005) New preparation method of highly reactive electrogenerated zinc and its use in cross-coupling reaction of functionalized organic bromides with aryl halides by using electrochemical method. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah. (Submitted)

Abdul Jalil, Aishah and Tokuda, Masao (2004) Dechlorination of monochlobenzene by using electrochemical method. In: 3rd Annual Seminar On Sustainbility Science And Management 2004, 4-5 May 2004, Kolej Universiti Sains dan Teknologi Malaysia (KUSTEM).

Abdul Jalil, Aishah and Tokuda, Masao (2004) Dechlorination of monochlorobenzene by using electrochemical method. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Kadir, Ahmad Dziaul Islam and Mohd. Alias, Mohamad Razin Naim and Mohd. Dzaki, Dzahir Rashidi and Azizan, Azizul and Md. Din, Norashidah (2022) Mobile IoT cloud-based health monitoring dashboard application for the elderly. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Abdul Majid, Zaiton and Buang, Nor Aziah and Aziz, Madzlan and Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Influence of pretreatment methods on the sorption capacity of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Majid, Zaiton and Buang, Nor Aziah and Sanip, Suhaila and Adan, Daliza and Ismail, Ahmad Fauzi (2005) Effect of temperature on the sorption characteristic of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Majid, Fadzilah Adibah and Md. Salleh, Liza and Jusoh, Mazura and Borham, Abdul Jalil (2004) Educating Engineers: Contribution Of Muslim Women Educators In Universiti Teknologi Malaysia. In: Contribution of Muslim Women Engineering Educators of UTM to the Society, March 2004, Universiti Teknologi Malaysia. (Unpublished)

Abdul Manaf, N. and Abbas, A. (2021) Investment decision of monoethanolamine based post combustion CO2 capture plant via application of control strategies. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Abdul Manan, Zainuddin (2004) New advances in process integration research. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Abdul Manan, Zainuddin and Lim, Chee Siang and Sarmidi, Mohd. Roji (2005) Development of a new process for palm oil refining based on supercritical fluid extraction technology. In: Symposium Of Malaysian Chemical Engineers SOMChE 2005, 8-10 Dec 2005, Universiti Malaysia Sabah. (Submitted)

Abdul Manan, Zainuddin and Mutalib, M. I. A. (1992) Pinch technology: Supertargetting for optimum synthesis of energy recovery networks. In: The 8th Symposium of Malaysian Chemical Engineers (SOMChE ) 1992, 14-15 October 1992, Kuala Lumpur.

Abdul Mukti, Mohamad Afifi and Mohd. Noor, Fatimah (2004) Engineering education - the hidden agenda. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abdul Raheem, Abdul Azeez and Selamat, Ali and Olatunji, Sunday Olusanya (2011) An hybrid model through the fusion of sensitivity based linear learning method and type-2 fuzzy logic systems for modeling PVT properties of crude oil systems. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Abdul Rahim, Fiza and Jamil, Norziana and Che Cob, Zaihisma and Mohd. Sidek, Lariyah and Sharizan@Sharizal, Nur Izz Insyirah (2022) Risk analysis of water grid systems using threat modeling. In: 11th International Conference on Information and Electronics Engineering, ICIEE 2022, 19 February 2022 - 21 February 2022, Virtual, Online.

Abdul Rahim, Zulhasni and Abdul Rahman, Nor Azian and Iqbal, Muhamad Saqib (2022) The National Industry 4.0 Policy performance review based on Industry4WRD readiness assessment and intervention program. In: 6th International Conference of Reliable Information and Communication Technology (IRICT 2021), 22 - 23 December 2021, Virtual, Online.

Abdul Rahim, Zulhasni and Abu Bakar, Nooh (2014) Innovative cases of triz application in automotive industry. In: International Graduate Conference on Engineering Science & Humanity 2014 (IGCESH 2014), 19-21 August, 2014, Johor Bahru, Malaysia.

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2022) The introduction of TRIZ in the Malaysian education policy of learning curriculum syllabus in design and technology subject. In: 8th Regional Conference in Engineering Education, RCEE 2020 and Research in Higher Education, RHEd 2020, 29 - 30 September 2020, Johor Bahru, Malaysia.

Abdul Rahman, Ali and Arshad, Khairil Anuar and Abd. Razak, Norhuda and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Hydrogen desorption study of as-synthesized carbon nanotubes using artificial neural network. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Rahman, Alias and Chen, Tet Khuan (2008) Extending the existing Geo-Dbms to third dimension: The 3D data type and spatial operations. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Chen, Tet Khuan (2008) Extending the existing geo-dbms to third dimension: the 3D data type and spatial operations. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Chen, Tet Khuan and Azri, Nor Suhaibah and Gurcan, Buyuksalih (2008) 3D geospatial database from terrestrial /laser scanning (TLS) data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Dionnald, Beh BoonHeng (2008) Developing 3D geoportal for Wilayah Persekutuan Iskandar. In: 7th Annual Asian Conference & Exhibition on Geopastial Information, Technology and Application, 18-20 August 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Abdul Rashid, Muhammad Adib and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Ramlan, Nur Atiqah and Mazlan, Nurul Aiyshah and Sugeng, Dhani Avianto (2017) Integration of real-time non-surfactant emulsion fuel system on light duty lorry. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang, Malaysia.

Abdul Sani, M. F. A. and Muhamad, R. and Abdulrahman, H. (2020) Bond stress-slip of fly ash-based geopolymer concrete: a review. In: 4th International Conference on the Science and Engineering of Materials, ICoSEM 2019, 26 August 2019 - 28 August 2019, Kuala Lumpur, Malaysia.

Abdul Sani, M. F. A. and Muhamad, Rahimah and Mo, Kim Hung (2020) Effect of ground granulated blast furnace slag as partial replacement in fly ash-based geopolymer concrete. In: 3rd National Conference on Wind and Earthquake Engineering, NCWE 2019 and International Seminar on Sustainable Construction Engineering, ISCCE 2019, 12 July 2019 - 13 July 2019, Kuala Lumpur, Malaysia.

Abdul Talib, Hayati@Habibah and Mohd. Ali, Khairul Anuar and Idris, Fazli (2009) A review of relationship between quality management and organizational performance : a study of food processing SMEs. In: 2009 2nd IEEE International Conference on Computer Science and Information Technology, ICCSIT 2009, 8th - 11th August 2009, Beijing, China.

Abdul Wahab, A. M. and Rasid, Z. A. and Abu, A. and Mohd. Noor Rudin, N. F. and Yakub, F. (2017) The effect of changing disk parameters on whirling frequency of high speed rotor system. In: 1st AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.

Abdul Wahab, Abdul Malek and Rasid, Z. A. and Makhtar, Ahmad Khushairy and Mahmud, Jamaluddin (2021) Assessing the validity of torsional motion on dynamic analysis of rotor bearing system using finite element. In: 3rd International Conference on Separation Technology, ICoST 2020, 15 - 16 August 2020, Virtual, Online.

Abdul Wahab, Nur Haliza and Latif, L. A. and Ariffin, S. H. S. and Fisal, N. and Ghazali, N. Effiyana (2015) Route optimization in proxy mobile IPv6 test-bed via RSSI APPs. In: 1st International Conference on Communication and Computer Engineering, ICOCOE 2014, 20 - 21 May 2014, Malacca, Malaysia.

Abdulla Althawadi, Jamal Jasim and Hashim, Mazlan (2020) Satellite-based detection of oil spill signature residual using synergy multispectral images of Landsat-8 OLI and Landsat-7 ETM+. In: 40th Asian Conference on Remote Sensing: Progress of Remote Sensing Technology for Smart Future, ACRS 2019, 14 October 2019 - 18 October 2019, Daejeon Convention Center (DCC) Daejeon, South Korea.

Abdullah, Roslina and Saidi, Hamdani (2004) A study of dynamic behaviour of proton exchange membrane fuel cell stack. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Abdullah, A. C. and Ooi, C. Y. and Ismail, N. B. and Mohammad, N. B. (2016) Power-aware through-silicon-via minimization by partitioning finite state machine with datapath. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Montreal's Sheraton CentreMontreal; Canada.

Abdullah, Abdul Rani Achmed and A. Jalil, Siti Zura and Nik Mohamed, Nik Nadzirah (2021) Clustering of maintenance work data for failure mode discrimination. In: 1st Indian International Conference on Industrial Engineering and Operations Management, IEOM 2021, 16 - 18 August 2021, Virtual, Online.

Abdullah, Hasnain and Md. Sharif, Juliana and Taib, Mohd. Nasir and Zanal, Asmalia and Baharudin, Rohaiza (2017) Improvement study of the reflectivity for hollow pyramidal shape absorbers. In: 2014 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2014, 28 September - 1 October 2014, Kota Kinabalu, Sabah.

Abdullah, M. A. and Zakariya, R. and Hasan, R. C. (2019) Statistical relationship between multibeam backscatter, sediment grain size and bottom currents. In: 10th National Technical Seminar on Underwater System Technology, NUSYS 2018, 26-27 Sep 2018, Pahang, Malaysia.

Abdullahi, Muhammad and Othman, Nooraini (2022) The influence of supervisors in the implementation of industrial attachment program in TVET institutions in Nigeria. In: 8th Regional Conference in Engineering Education, RCEE 2020 and Research in Higher Education, RHEd 2020, 29 September 2020 - 30 September 2020, Johor Bahru, Johor, Malaysia.

Abed, E. Y. and Madhoun, W. A. and Elmanama, A. A. and Kim, H. and Xu, X. and Ros, F. C. (2020) Appraisal of indoor microbial pollutants at university research labs and offices under Mediterranean climate. In: 3rd EPI International Conference on Science and Engineering 2019, EICSE 2019, 24 - 25 September 2019, Gowa, South Sulawesi.

Abiduzzaman, S. M. and Mansor, Hasmah and Gunawan, Teddy Surya and Ahmad, Robiah (2021) Real-time outdoor air quality monitoring system. In: 7th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, 23 - 25 August 2021, Virtual, Bandung.

Abraham, Ajith and Sulaiman, Sarina and Shamsuddin, Siti Mariyam (2011) Intelligent web caching using adaptive regression trees, splines, random forest and tree net. In: The 3rd Conference On Data Mining And Optimization(Dmo 11).

Abu Bakar, A. and Mohd. Rasol, R. and Nordin, Y. and Md. Noor, N. and Mohd. Ali, M. K. F. (2015) Turbidity method to measure the growth of anaerobic bacteria related to microbiologically influenced corrosion. In: International Scientific Conference Corrosion, 2014, 18 - 21 November 2014, Gliwice, Poland.

Abu Bakar, N. A. and Yaacob, S. and Hussein, S. S. and Nordin, A. and Sallehuddin, H. (2019) Dynamic metamodel approach for government enterprise architecture model management. In: 5th Information Systems International Conference, ISICO 2019, 23-24 July 2019, Surabaya, Indonesia.

Abu Bakar, Nur Azaliah and Mohd. Anuar, Mohd. Syahid and Musa, Norhafizah and Salih Yagoub, Fathi Ibrahim (2018) Iot security risk management model in healthcare. In: 4th International Conference on Information Technology & Society (IC-ITS) 2018, 30 October 2018 - 31 October 2018, Selangor, Malaysia.

Abu Hasan, Nooradilla and Miskon, Suraya and Ahmad, Norasnita and Mat Ali, Nazmona and Hashim, Haslina and Syed Abdullah, Norris and Alias, Rose Alinda and Maarof, Mohd. Aizaini (2015) Business intelligence readiness factors for higher education institution. In: 4th International Conference on Research and Innovation in Information System, 8-10 Dec, 2015, Melaka, Malaysia.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Johari, M. B. and Najafian, G. (2016) Extreme response prediction for fixed offshore structures by Monte Carlo time simulation technique. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2015) The accuracy and efficiency of the efficient time simulation procedure in derivation of the 100-year responses. In: 6th International Conference on Computational Methods in Marine Engineering, MARINE 2015, 15 - 17 June 2015, Rome, Italy.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2016) The effect of different methods of simulating wave induced water particle kinematics on the 100-year responses. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Abu Toalib, Abu Toalib and Ahmad, Robiah and Ahmad, Norulhusna (2020) Optimal design of off-grid hybrid renewable energy system for electrification of One Fathom Bank Malaysia. In: 8th IEEE R10 Humanitarian Technology Conference, R10-HTC 2020, 1 - 3 December 2020, Kuching, Sarawak.

Abubakar, Mu'Azu and Aliyu, Abubakar Baba and Ahmad, Norhayati (2015) Flexural strength analysis of dense and porous sintered clay using weibull probability distribution. In: Applied Mechanics and Materials, 2015.

Adam, Asrul and Mokhtar, Norrima and Mubin, Marizan and Ibrahim, Zuwairie and Shapiai @ Abd. Razak, Mohd. Ibrahim (2015) Dingle's model-based EEG peak detection using a rule-based classifier. In: The International Conference on Artificial Life and Robotics 2015 (ICAROB 2015) 20th Arob Anniversary, 10-12 Jan, 2015, Japan.

Addrus, Asrulnizam and Hamzah, H. S. and Mohdali, Raihana and Haron, Habibah @ Norehan (2015) Preliminary strategic review to the Malaysian automotive industry. In: International Conference on Engineering Business Management 2015, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Adiputra, D. and Mazlan, S. A. and Zamzuri, H. and Rahman, M. A. A. (2016) Development of controller for Passive Control Ankle Foot Orthoses (PICAFO) based on Electromyography (EMG) signal and angle. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Sunan HotelSurakarta; Indonesia.

Adnan, M. A. and Kamilia, K. and Yamada, Y. and Idris, I. H. and Ali, A. A. (2022) Biocompatible sago aerogel material as a substrate for antenna application. In: Malaysia-Japan Workshop on Radio Technology, MJWRT 2022, 11 January 2022 - 12 January 2022, Virtual, Online.

Afolabi, H. K. and Nordin, N. A. H. and Nasef, M. M. and Harun, N. Y. and Ting, T. M. and Saeed, A. A. H. (2021) Isotherms for adsorption of boron onto new fibrous adsorbent containing glycidol ligands: linear and nonlinear regression methods. In: 3rd International Conference on Tropical Resources and Sustainable Sciences, CTReSS 2021, 14 July 2021 - 15 July 2021, Kelantan, Virtual.

Ahmad, Anuar and Adnan, Nur Azhani (2008) Digital photogrammetry: comparison of digital orthophoto based on different dataset of digital images of aerial photograph. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Ahmad, Robiah and Mad Kaidi, Hazilah and Nordin, Muhammad Noor and Ramli, Aizat Faiz and Abu, Mohd. Azlan and Kadase, Yosof (2022) Development of blood oxygen level, heart rate and temperature monitoring system by using ESP32. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Ahmad, Robiah and Mohd. Samsuri, Saiful Farhan and Zakaria, Mohd. Zakimi (2012) Evapotranspiration prediction using system identification and genetic algorithm. In: The 31st IASTED Asian Conference on Modelling, Identification and Control, AsiaMIC 2012, 2-4 Apr 2012, Phuket, Thailand.

Ahmad, S. Z. A. S. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Mohd., M. H. (2019) Offshore responses using an efficient time simulation regression procedure. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Ahmad Nasruddin, Mohd. Hasif and Hassan, Muhammad Imzan and Abdul Rahman, Alias (2008) Developing 3D cadastre registration system. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Ahmad Saufi, Roselina and Mahinder Singh, Harcharanjit Singh and Kakar, Abdul Samad (2018) Understanding linkage between human resource management practices and intention to leave: a moderated-mediation conceptual model. In: 2018 International Conference on Information Management and Management Science, IMMS 2018, 25 August 2018 - 27 August 2018, Southwest Jiaotong UniversityChengdu, China.

Ahmad Tarmizi, Siti Maisarah and Zamri, Muhammad Amin and Nordin, Nur Azmah and Mohd. Rosnan, Rizuan and Mazlan, Saiful Amri and Yahaya, Hafizal and Abdul Aziz, Siti Aishah (2020) Effect of high sintering temperature on the cobalt ferrite synthesized via co-precipitation method. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Ahmed, A. M. and Hashim, A. H. A. and Hassan, W. H. (2015) Investigation of gateway placement optimization approaches in wireless mesh networks using genetic algorithms. In: 5th International Conference on Computer and Communication Engineering, ICCCE 2014, 23 - 24 September 2014, Kuala Lumpur, Malaysia.

Ahmed, Irfanuddin Shafi and Kamardin, Kamilia and Yamada, Yoshihide and Noureen, Taj R. and Idris, Izni Husna and Mad Kaidi, Hazilah and Bani, Nurul Aini and Mohd. Sam, Suriani (2020) IoT enabled wireless health monitoring system using textile antenna. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2019, 25 November 2019 - 27 November 2019, Melaka, Malaysia.

Aid, Siti Rahmah and Mohd. Rashid, Nur Nadhirah and Jonny, Nur Farhana Arissa and Centeno, Anthony and Ikenoue, Hiroshi (2020) Preliminary study on laser annealed NP junction in phosphorus implanted germanium. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE 2020, 28 - 29 July 2020, Kuala Lumpur, Malaysia.

Al Shamsi, Sulaiman and Ahmad, Anuar (2008) Critical successful factors analysis for national data infrastructure implementation. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Al-Dailami, Anas and Ahmad, Imran and Abdullah, Norhayati and Koji, Iwamoto and Yuzir, Ali (2022) Feasibility and viability of procuring biohydrogen from microalgae: An emerging and sustainable energy resource technology. In: 9th Conference on Emerging Energy and Process Technology 2021, CONCEPT 2021, 24 November 2021 - 25 November 2021, Johor Bahru, Johor.

AL-Hadi, Ismail Ahmed A. and Shamsuddin, Siti Mariyam and Hashim, Siti Zaiton (2011) Bacterial foraging optimization algorithm for neural network learning enhancement. In: Eleventh International Conference On Hybrid Intelligent System.

Al-Shatri, S. H. H. and Murid, A. H. M. and Ismail, M. (2016) Solving robin problems in bounded doubly connected regions via an integral equation with the generalized neumann kernel. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Alagapan, P. and Hassan, M. Z. and Ibrahim, M. H. and Daud, M. Y. and Bani, N. A. and Kutty, R. M. (2019) Measurement of hazardous personal noise exposure in spice manufacturing industry. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor, Malaysia.

Alashwal, Hany Taher Ahmed and Deris, Safaai and Othman, Muhamad Razib (2006) Support vector machines for predicting protein-protein interactions using domains and hydrophobicity features. In: IEEE International Conference on Computing & Informatics (ICOCI'2006), 6-8 June 2006, Kuala Lumpur.

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. (2016) Investigation of the influence of particle size on the migration of DNAPL in unsaturated sand. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Alaziaza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2016) Investigation of light non-aqueous phase liquid migration single and double-porosity soil using light transmission visualization method (LTV). In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Alghenaim, M. F. and Abu Bakar, N. A. and Mohd. Yusoff, C. F. and Hassan, N. H. and Sallehudin, H. (2021) Employee awareness model to enhance awareness of social engineering threats in the Saudi public sector. In: 2021 International Congress of Advanced Technology and Engineering, ICOTEN 2021, 4 July 2021 - 5 July 2021, Virtual, Online.

Ali, Noorhalieza and Slater, M. J. (1991) The effects of mass transfer on drop breakage in rotating disc contactors. In: Second Particulate Technology Conference PARTEC 91, 1991.

Ali, Dayana Farzeeha and Noordin, Muhammad Khair and Ahmad, Adnan and Shukor, Nurbiha A. and Abd. Halim, Noor Dayana and Abdullah, Abdul Halim and Md. Nasir, Ahmad Nabil and Omar, Marlissa (2015) Effect of virtual environment courseware in learning engineering drawing. In: Innovative Practices in Higher Education Expo 2015 (I-PHEX 2015).

Ali, M. B. and Hashim, A. H. A. and Hassan, W. H. (2015) Evaluation of nested network mobility approaches. In: 25th International Conference on Computer and Communication Engineering, ICCCE 2014, 23 - 24 September 2014, Kuala Lumpur, Malaysia.

Ali, Mohamad Wijayanuddin (2002) Risk assessment framework and criteria for major accidental release to the environment in Malaysia. In: 5th Annual National Conference on Occupational Safety & Health (COSH 2002), 25-26 June 2002, Bangi, Selangor. (Submitted)

Ali, Roshafima Rasit and Mohd. Raffae, Solehah and Che Jusoh, Nurfatehah Wahyuny and Kaur, J. and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Hasbullah, Hasrinah (2020) Self-cleaning and hydrophobic pineapple peel fibre based biocomposite. In: 4th International Conference on Advanced Technology and Applied Sciences, ICaTAS 2019, 10 - 12 September 2019, Cairo, Egypt.

Ali Khan, Mohd. Noor Azli and Kiflee, Ag Kaifah Riyard (2018) Quality of information disclosure: a literature review. In: Persidangan Serantau Sains Sosial & Kemanusiaan (PSSSK) 2018.

Alias, Nor Azira and Setan, Halim and Majid, Zulkepli (2008) Calibration of a digital camera for close-range photogrammetry application. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Alias, Ros Haslinda and Mohamad Noor, Noor Maizura and Mohd. Saman, Md. Yazid and Abdullah, Mohd. Lazim and Selamat, Ali (2011) Contractor selection using fuzzy comparison judgement. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Alismaili, Saleh Nasser Rashid and Shanmugam, Mohana and Kasim, Hairol Adenan and Magalingam, Pritheega (2021) A modified UTAUT model for hospital information systems geared towards motivating patient loyalty. In: The 5th International Conference of Reliable Information and Communication Technology 2020, 21 - 22 December 2021, Langkawi, Malaysia.

Almhab, Ayoub and Busu, Ibrahim (2008) Decision support system for estimating actual crop evapotranspiration using remote sensing, GIS and hydrological models. In: 7th Annual Asian Conference & Exhibition on Geopastial Information, Technology and Application, 18-20 August 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Almhab, Ayoub and Busu, Ibrahim (2008) Evapotranspiration estimation using a normalized difference vegetation index transformation of two satellites data in arid mountain areas. In: 7th International Symposium 7 Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Alshami, I. H. and Ahmad, N. A. and Sahibuddin, S. (2015) Dynamic WLAN fingerprinting RadioMap for adapted indoor positioning model. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools and Techniques, SoMeT 2014, 22 - 24 September 2014, Langkawi, Malaysia.

Alshami, Iyad H. and Ahmad, Noor Azurati and Sahibuddin, Shamsul (2021) RSS certainty: An efficient solution for RSS variation due to device heterogeneity in WLAN fingerprinting-based indoor positioning system. In: 2021 Palestinian International Conference on Information and Communication Technology, PICICT 2021, 28 - 29 September 2021, Gaza, Palestine.

Alwi, S. M. Y. W. and Husain, M. K. A. and Zaki, N. I. M. (2019) Marine growth inspection for jacket structures by behaviour and sensitivity analysis. In: 7 International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Amat, R. C. and Ismail, S. and Wahab, M. H. and Ahmad, N. H. and Rani, W. N. M. W. M. (2020) A dimension of biophilia in urban design. In: The 1st International Conference on Urban Design and Planning, 10 Sep 2019, Semarang, Indonesia.

Ambran, Sumiaty and Ahmad, Fauzan and Ibrahim, Amalina Athira and Baharudin, Nurul Atiqah and Osamu, Mikami and Sugiyama, Rohei and Chiemi, Fujikawa (2018) Uv-curable resin microlens on optical pillars for optical interconnect. In: Japan Society of Applied Physics, 15 October 2018 through 18 October 2018, Taiwan.

Amer, N. H. and Zamzuri, H. and Hudha, K. and Aparow, V. R. and Kadir, Z. A. and Abidin, A. F. Z. (2016) Modelling and trajectory following of an armoured vehicle. In: 2nd SICE International Symposium on Control Systems, ISCS 2016, 7 March 2016 through 10 March 2016, Japan.

Amerudin, Shahabuddin (2012) An amalgamated 3D spatial data model for city modelling. In: XXII ISPRS Congress, Technical Commission II (Volume XXXIX-B2), 25 August-01 Sept, 2012, Melbourne, Australia.

Amin @ Mohd. Amin, Nor Fadila and Abdul Latif, Adibah and Muhammad, Siti Aisyah and Leong, Ting Che (2014) Synthesis and characterization of cassava starch nanocrystals by hydrolysis method. In: Advanced Materials Research, 20-22 Aug, 2014, Kuala Lumpur, Malaysia.

Amir Sjarif, Nilam Nur and Ya'Acob, Suraya and Mohd. Yusoff, Rasimah Che and Mohd. Azmi, Nurulhuda Firdaus and Yuhaniz, Siti Sophiayati and Wan Safie, Wan Nazirul Hafeez (2018) SMS spam classification using vector space model and artificial neural network. In: 4th International Workshop on Big Data Analytics 2018.

Amiruddin, I. M. and Pauziah, M. and Aminudin, A. and Unuh, M. H. (2017) Design and development of the Macpherson Proton Preve Magneto rheological damper with PID controller. In: 2017 International Conference on Structural, Mechanical and Materials Engineering, ICSMME 2017, 13 - 15 July 2017, Seoul, South Korea.

Amran, Fadina and Ahmad Zaini, Muhammad Abbas and Ali, Asmadi (2020) Metals hydroxide activation of casuarina empty fruit for methylene blue and congo red removal. In: Proceedings of the Third International Conference on Separation Technology 2020 (ICoST 2020), 15 August 2020, Virtual.

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah (2022) The impact of technology readiness on user acceptance of government cloud computing services. In: 4th International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2022, 9 June 2022 - 11 June 2022, Ankara, Turkey.

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati (2020) The validity and reliability evaluation of instruments for cloud computing acceptance study. In: 6th IEEE International Conference on Information Management, ICIM 2020, 27 March 2020 - 29 March 2020, London, United Kingdom.

Anjomshoae, Ali and Hassan, Adnan and Samuel, Cherian and Wong, Kuan Yew (2015) Effect of information sharing and capacity adjustment on healthcare service supply chain: the case of flood disaster. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Anshah, Siti Aminah and Ahmad, Anuar and Mat Amin, Zulkarnaini (2008) Arima model time-series forecasting for structural monitoring using RTK-GPS. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Anuar, L. and Amrin, A. and Mohammad, R. and Ourdjini, A. (2016) Vehicle accelerated corrosion test procedures for automotive in Malaysia. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Anwar, Zahrina and Gunawan, Teddy Surya and Ahmad, Robiah and Kartiwi, Mira (2021) Development of smart alarm based on sleep cycle analysis. In: 2021 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2021, 17 - 20 May 2021, Virtual, Glasgow.

Araghi, Tanya Koohpayeh and Alarood, Ala Abdulsalam and Araghi, Sagheb Kohpayeh (2021) Analysis and evaluation of template based methods against geometric attacks: A survey. In: The 5th International Conference of Reliable Information and Communication Technology 2020, 21 - 22 December 2021, Langkawi, Malaysia.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Manaf, A. A. and Araghi, Sagheb Kohpayeh (2015) An access control framework in an ad hoc network infrastructure. In: 1st International Conference on Communication and Computer Engineering, ICOCOE 2014, 20 - 21 May 2014, Melaka, Malaysia.

Arai, N. (2016) Virtual mass of any shape of body by using general mapping function. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Sarawak; Malaysia.

Aras, Mohd. Shahrieel Mohd. and Abdullah, Shahrum Shah and Rahman, Ahmad Fadzli Nizam Abdul and Basar, Mohd. Farriz and Kassim, Anuar Mohamed and Jaafar, Hazriq Izzuan (2015) Analysis of movement for unmanned underwater vehicle using a low cost integrated sensor. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 28 - 30 May 2014, Penang, Malaysia.

Arash, Habibi Lashkari and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) Security evaluation for graphical password. In: International Conference on Digital Information and Communication Technology and its Applications (DICTAP2011), June 21-23, 2011, Dijon, France .

Arianti, D. and Shahril, R. and Baharun, S. and Islam, A. K. M. M. and Komaki, S. (2015) Fold contour estimation technique for pre-processing 3D colonoscopy images: Polyp cases. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Ariffin, Aini Suzana and Baqutayan, Shadiya Mohamed S. (2015) Increase technological innovation in research & technology institutions by adopting (ITIC-VC). In: International Conference on Innovation and Management (IAM2015W), 3-6 Feb, 2015, Singapore.

Arjunaidi, Ayuni Afiqah and Quzwain, Kamelia and Yamada, Yoshihide and Kamardin, Kamilia and Dinh, Nguyen Quoc (2021) Focal region ray tracing of dual spherical reflector antenna. In: 2020 International Symposium on Antennas and Propagation, ISAP 2020, 25 - 28 January 2021, Virtual, Osaka.

Arjunaidi, Ayuni Afiqah and Yamada, Yoshihide and Kamardin, Kamalia (2021) Focal region analysis of dual spherical reflector antenna. In: 2021 IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2021, 20 - 22 December 2021, Penang, Malaysia.

Arof, K. Z. M. and Ismail, Syuhaida and Najib, N. H. and Amat, R. C. and Ahmad, N. H. B. (2020) Exploring opportunities of adopting biophilic cities concept into mixed-use development project in malaysia. In: 1st International Conference on Urban Design and Planning, ICUDEP 2019, 10 September 2019, Semarang, Indonesia.

Arumugham, Thilagavathi and Mohamad, Shaza Eva (2022) Anammox bacterium 'Candidatus Kuenenia stuttgartiensis': A review. In: The 9th AUN/SEED-Net Regional Conference on Natural Disaster, 15 December 2021 - 16 December 2021, Virtual, Online.

Arzimi, Intan Maizura and Mahrin, Mohd. Naz'ri and Hussein, Surya Sumarni and Abu Bakar, Nur Azaliah and Hassan, Noor Hafizah and Chuprat, Suriayati (2022) Metamodel for enterprise architecture: A systematic literature review. In: 6th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2021, 1 - 3 December 2021, Virtual, Kedah, Malaysia.

Asako, Yutaka and Chung, Pyo Hong and Maeda, Kenshi and Morini, Gian Luca (2018) Scaling effects in transition region between laminar and turbulent gas flows through micro-tubes. In: Proceedings of the 5th European Conference on Microfluidics Micro-Flu18.

Asako, Yutaka and Shigeishi, Takayuki and Katanoda, Hiroshi and Hong, Chung Pyo (2018) An experimental estimation in the recovery factor of microchannel gas flow by measuring the adiabatic wall temperature. In: 2nd International Research Symposium In Tourism Hospitality & Events: Contemporary Issues & Future Scenarios.

Asako, Yutaka and Shigeishi, Takayuki and Rehman, Danish and Morini, Gian Luca and Hong, Chung Pyo (2018) Data reduction of average friction factor of gaseous flow in micro-channels with adiabatic wall. In: Migrate 3rd International Workshop.

Ashri, M. F. and Rejab, N. A. and Ahmad, Z. A. and Abdullah, N. S. and Badarulzaman, N. A. and Mat, R. A. A. R. and Ali, W. F. F. W. (2019) Densification and grain growth of microwave-sintered yttrium iron garnet. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Athimulam, Arunasalam and Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2005) Modelling and optimisation of tongkat ali water extract production utilising a batch process simulator. In: The Second Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM) International Conference, April 27-30, 2005, Manila, Philippines.

Aung, Lwin Moe (2015) Prediction of surface roughness improvement and its limitation in automated precision mold lapping. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hiratsuka, Japan.

Aung, Lwin Moe and Aung, Myintzu Phyo (2015) Extraction of Myanmar noun phrase using maximum matching approach. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hiratsuka, Japan.

Awang, Mariyamni and Wan Abdul Rahman, Wan Aizan (2005) EOR additives from local sources. In: Improved Oil Recovery Asia 2005, 28-31March 2005, The Shangri-La Hotel, Kuala Lumpur. (Unpublished)

Awang, N. F. and Manaf, A. A. (2015) Automated security testing framework for detecting SQL injection vulnerability in web application. In: Global Security, Safety and Sustainability: Tomorrow's Challenges of Cyber Security - 10th International Conference, ICGS3 2015, 15 - 17 September 2015, London, United Kingdom.

Ayub, Muhammad Syazwan and Rozali, Amirul Azha and Marni, Nurazmallail (2019) Media Sosial dan Kecanduan Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Aziz, S. A. A. and Mazlan, S. A. and Nik Ismail, N. I. and Ubaidillah, Ubaidillah and Khairi, M. H. A. and Yunus, N. A. (2017) Rheological properties of carbon nanotubes-reinforced magnetorheological elastomer. In: International Conference on Science and Applied Science 2016, ICSAS 2016, 19 November 2016, Surakarta, Indonesia.

Azizan, Azizul and Md. Din, Norashidah and Mohd. Dzaki, Dzahir Rashidi and Abdul Kadir, Ahmad Dziaul Islam and Shafie, Noraimi (2022) Implementation of an IoT cloud-based elderly care health monitoring dashboard. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Azizan, Muhamad Ariffudin and Kariya, Muhammad Azizi and Jasmi, Kamarul Azmi (2019) Media Sosial dan Penyebaran Budaya Transeksual Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Azizan, N. A. Z. and Yuzir, A. and Al-Qaim, F. F. and Abdullah, N. (2020) Anaerobic treatment performance in presence of pharmaceutically active compounds. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Kuala Lumpur, Malaysia.

Azman, Azreen Harina and Tukimat, Nurul Nadrah Aqilah and Malek, M. A. and Che Ros, Faizah (2021) Analysis of Malaysia electricity demand and generation by 2040. In: 4th International Conference on Science and Technology Applications in Climate Change, STACLIM 2021, 1 - 2 July 2021, Selangor, Virtual.

Azman, N. U. and Husain, M. K. A. (2019) Structural integrity of fixed offshore platforms by incorporating wave-in-deck load. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Azzahari, Najwa and Sapingi, Husni Hani Jameela and Mohd. Razali, Sumiaty Nazirah and Ambran, Sumiaty (2021) Simulation of d-shaped optical fiber sensor for adulterant traces in liquid petrochemical. In: 9th International Conference on Electrical Engineering, Computer Science and Informatics, EECSI 2022, 6 October 2022 - 7 October 2022, Jakarta, Indonesia.

Bachtiar, N. A. and Sarmidi, Mohamad Roji (1997) Spray drying as the alternative method for production of tropical fruit powder. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Bahar, N. D. and Marimuthu, S. and Yahya, W. J. (2016) Pulsed Nd: YAG laser drilling of aerospace materials (Ti-6Al-4V). In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Baharin, R. H. B. M. and Tuan, N. T. and Yamada, Y. and Kamardin, K. B. (2016) Electrical characteristic changes by setting conditions of Normal-Mode Helical Antenna in a phantom. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. and Suzuki, A. and Taguchi, S. and Mitomi, O. (2016) Spot size converter using mask-Transfer self-written waveguide method for optical interconnection. In: 2016 IEEE CPMT Symposium Japan, ICSJ 2016; Kyoto; Japan, 7 November 2016 through 9 November 2016, Kyoto; Japan.

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. (2016) Self-written waveguide (SWW) optical pin for high optical coupling in multi-layer printed wiring board. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Baharudin, Nurul Atiqah and Ambran, Sumiaty and Osamu, Mikami and Fujikawa, Chiemi (2015) Optical coupling for multi-layer printed wiring board by selfwritten waveguide. In: Malaysia-Japan Joint International Conference 2015, 13-15 Nov, 2015, Japan.

Bakar, Nur Azaliah A. and Kama, Nazri and Harihodin, S. (2015) A systematic review of enterprise architecture establishment process. In: Proceedings of the 5th International Conference on Computing and Informatics, ICOCI 2015, 11 - 13 August 2015, Istanbul, Turkey.

Bani, Nurul Aini and Musa, Rafizah and Dziyauddin, Rudzidatul Akmam and Hassan, Mohamad Zaki and Usman, Sahnius and Mad Kaidi,, Hazilah and Mohd. Hashim, Nor Fazilah and MasUd, Abdullahi Abubakar and Sukki, Firdaus Muhammad and Abu-Bakar, Siti Hawa (2018) A pilot study of malnutrition among elderly in a Malaysia elderly care centre - part i: assessment of handgrip strength measurement. In: 2nd International Conference on BioSignal Analysis, Processing and Systems, ICBAPS 2018, 24 July 2018 - 26 July 2018, Kuching, Sarawak, Malaysia.

Bani, Nurul Aini and Noordin, Muhammad Khair and Hidayat, Achmad Alfian and Ahmad Kamil, Ahmad Safwan and Amran, Mohd. Effendi and Kasri, Nur Faizal and Muhtazaruddin, Mohd. Nabil and Muhammad Sukki, Firdaus (2022) Development of predictive maintenance system for haemodialysis reverse osmosis water purification system. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Baruah, S. and Chuprat, Suriayati (2011) Real-time divisible load theory : incorporating computation costs. In: The 17th IEEE International Conference On Embedded And Real-Time Computing Systems And Applications (Rtcsa 2011).

Batool, Uzma and Shapiai, Mohd. Ibrahim and Ismail, Nordinah and Fauzi, Hilman and Salleh, Syahrizal (2020) Oversampling based on data augmentation in convolutional neural network for silicon wafer defect classification. In: 19th International Conference on New Trends in Intelligent Software Methodologies, Tools and Techniques, SoMeT 2020, 22 - 24 September 2020, Virtual, Online.

Bayar, Necmettin and Al-Shaibani, W. T. and Shayea, Ibraheem and El-Saleh, Ayman A. and Azizan, Azizul and Roslee, Mardeni and Taha, Abdulkader (2021) Spatial fuzzy clustering on synthetic aperture radar images to detect changes. In: 15th IEEE Malaysia International Conference on Communications, MICC 2021, 1 - 2 December 2021, Virtual, Online.

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) Artificial neural network based controller for line starting performance synchronous motor of a conveyor system using field oriented self-controlled. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Buang, Nor Aziah and Abd. Majid, Zaiton and Sulaiman, Yusran and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Effect of addition of Ni metal catalyst onto the Co and Fe supported catalysts for the formation of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Buang, Nor Aziah and M. Sanip, Suhaila and Omar, Juzailah and Tee, Jia Chee and Ismail, Ahmad Fauzi (2005) Carbon nanotubes synthesis using alumina template. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Buang, Nor Aziah and M. Sanip, Suhaila and Sulaiman, Yusran and Ismail, Ahmad Fauzi (2005) Synthesis of carbon nanotubes (CNTs) grown over suppported catalyst and their adsorption properties. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Bulya Nazim, Nur Julia Nazim and Abdullah, Mohd. Faizol and Mat Hussin, Mohd. Rofei and Mohamad Badaruddin, Siti Aishah and Ismail, Muhamad Amri and Hashim, Abdul Manaf (2022) Investigation of hybrid graphene-hBN and graphene-GO as a direct contact heat spreader. In: 2022 IEEE International Conference on Semiconductor Electronics, ICSE 2022, 15 - 17 August 2022, Virtual, Kuala Lumpur.

Bulya Nazim, Nur Julia Nazim and Abdullah, Mohd. Faizol and Mat Hussin, Mohd. Rofei and Mohamad Badaruddin, Siti Aishah and Ismail, Muhamad Amri and Hashim, Abdul Manaf (2022) Thermal characterization of mono and multilayer hexagonal boron nitride heat spreaders. In: 2022 IEEE International Conference on Semiconductor Electronics, ICSE 2022, 15 - 17 August 2022, Virtual, Kuala Lumpur.

Burhannuddin, Nurul Liyana and Zolkifli, Nur Nabila Balqis and Nordin, Nur Azmah and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Yahaya, Hafizal (2020) Effect of corroded plate-like iron particles on the rheological properties of magnetorheological elastomer. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Buyong, Taher and Ismail, Suriatini and Sipan, Ibrahim @ Atan and Hashim, Mohd. Ghazali and Adan, Mohd Nurul Fakhri (2008) Kriging In Mass Appraisal For Rating. In: International Real Estate Research Symposium (IRERS) 2008 Benchmarking, Innovating and Sustaining Real Estate Market Dynamics, 28 – 30th April 2008, PWTC Kuala Lumpur, Malaysia. (Unpublished)

C., Rizos and S., Lim and T. A., Musa and S., Ses and S., Amir and K., Zhang (2009) Atmospheric remote sensing using GNSS in the Australasian region: from temperate climates to the tropics. In: Proceeding of the 2009 IEEE International Geoscience & Remote Sensing Symposium, 2009, Cape Town, Afrika Selatan.

Cahyono, Eko Budi and Mohd. Sam, Suriani and Hassan, Noor Hafizah and Mohamed, Norliza and Ahmad, Norulhusna and Yusuf, Yusnaidi (2022) A review on cyber resilience model in small and medium enterprises. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Chan, Fook Kiong and Ismail, Ahmad Fauzi and M. Yusof, M. Rashid (2000) Development of membrane oxygen enrichment system for wastewater aeration system. In: Malaysian Science & Technology Congress (MSTC) 2000 , 7-9 November 2000, Genting Highlands. (Unpublished)

Chan, Jun Hoa and Foo, Dominic C. Y. and Kumaresan, Sivakumar and Abdul Aziz, Ramlan and Abu Hassan, Mohd. Ariffin (2005) Process modelling of a PVC production plant. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Chan, Kit Hie and Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Industrial applications of silica-based gas adsorbents. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Chang, Yvonne S. H. and Yaacob, Zulkefli and Mohsin, Rahmat and Abdul Majid, Zulkifli (2005) Effect of injection position on throttle body injection mixer for compressed natural gas motorcycle. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Che aron, Zamree and Abdalla, Aisha Hassan and Abdullah, Khaizuran and Hassan, Wan Haslina and Rahman, Md. Arafatur (2015) A robust on-demand routing protocol for cognitive radio Ad Hoc networks. In: International Conference on Mobile andWireless Technology, ICMWT 2015, 23 - 25 June 2015, Bangkok, Thailand.

Che Hasan, Rozaimi and Md. Said, Najhan and Khalil, Idham (2021) Seafloor habitat mapping using machine learning and underwater acoustic sonar. In: International Conference on Computational Intelligence in Machine Learning, ICCIML 2021, 1 - 2 June 2021, Virtual, Online.

Che Puan, Othman and Mohd. Yunus, Mohd. Zulkifli and Sajjadi, Seyed Mahdi and Navaz, Taha Mehman (2015) Determining the best highway candidate based on cost and safety using the analytic hierarchy process. In: Proceedings of 1st Icril-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr, 2015, Kuala Lumpur, Malaysia.

Che Rahmat, Ahmad Aizat and A. Jalil, Siti Zura and Syed Abd. Rahman, Sharifah Alwiah and Usman, Sahnius (2021) Relationship of backpack weight towards risk factor for scoliosis among primary school children in Pahang, Malaysia. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 - 10 November 2021, Virtual, Online.

Che Ros, Faizah and Jaafar, Aminah Syakirah (2018) Flood forecasting model for Kelantan river basin, Malaysia using ifas and getflows. In: The 13th International Conference on Hydroscience and Engineering.

Che' Man, Noordini and Harry, Timmermans (2015) A discrete choice model for firm location decision. In: 13th International Congress of Asian Planning Schools Association (Apsa 2015), 12-14 Aug, 2015, Johor Bahru, Johor.

Che-Aron, Z. and Abdalla, A. H. and Hassan, W. H. and Abdullah, K. and Rahman, M. A. (2015) E-D2CARP: A joint path and spectrum diversity based routing protocol with an optimized path selection for cognitive radio ad hoc networks. In: 2nd IEEE International Symposium on Telecommunication Technologies, ISTT 2014, 24 - 26 November 2014, Langkawi, Malaysia.

Chee, Chit Lai and Md. Illias, Rosli and Hassan, Osman and Kamaruddin, Kamarulzaman and Abdul Aziz, Suraini and Md. Salleh, Madihah and Wan Md. Zain, Wan Salwanis (2005) Cloning of pullulanase gene from local isolated bacteria. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Chee, Leong Lam and Mohd. Rafi, Muhamad Firdaus and Mohd. Fishol, Mohamad Fahmi Hazwan and Mohd. Yudin, Muhamad Bakhtiar and Michi, Aldi and Sriprachuabwong, Chakrit and Tuantranont, Adisorn and Bagus Wicaksono, Dedy Hermawan (2015) Graphene-based flexible circuit on cotton fabric using wax patterning method. In: Advanced Materials Research, 26-28 Sept, 2015, Indonesia.

Chelliapan, Shreeshivadasan and Idris, Mohamed Anuar (2018) Risk assessment of centralized chlorine gas system at rubber glove manufacturing plant. In: Proceeding of the 2nd Master Project Symposium.

Chen, C. H. and Wan Abdul Rahman, Wan Aizan (2004) Morphology and tensile property of the blow molded high density polyethylene (HDPE) and cross-linked HDPE bottles after immersion in petrol and diesel. In: 13th Scientific Conference and 14th Annual General Meeting of Electron Microscopy Society of Malaysia (EMSM), Selangor, Malaysia.

Chen, Chan Hoong and Wan Abdul Rahman, Wan Aizan and M., Mohd. Nazrul (2004) The effect of petrol and diesel on high density polyethylene (HDPE) and cross-linked HDPE bottles: tensile and thermal properties analysis. In: 2nd Colloqium on Postgraduate Research National Postgraduate Collloqium on Material, Mineral and Polymer 2004 (MAMIP 2004), Penang, Malaysia.

Chew, Yin hoon and Lee, Chew Tin and Foo, Dominic Chwan Yee (2005) Evaluating heat integration scheme for batch production of oleic acid. In: Malaysian Science and Technology Congress (MSTC 2005), 18 - 20 April 2005, CitiTel Hotel Mid Valley, Kuala Lumpur.

Chew Sin, Cheong and Setan, Halim and Majid, Zulkepli (2009) 3D modelling of buildings using topcon imaging station and image master. In: Joint 8th International Symposium and Exhibition on Geoinformation 2009 & ISPRS Symposium on Spatial Decision Support System and LBS 2009, 2009, Crowne Plaza Mutiara Hotel, Kuala Lumpur.

Chieng, Y. Y. and Kamarudin, K. S. N. and Mat, Hanapi and Hamdan, Halimaton (2005) Study of N2 adsorption on metal oxides modified Na-Y zeolite: equilibrium and kinetic. In: MSA Golden Jubilee International Science Congress (ISC) 2005, August 3-6, 2005, Putra World Trade Centre, Kuala Lumpur.

Chieng, Y. Y. and Kamarudin, Khairul Sozana Nor and Hamdan, Halimaton and Mat, Hanapi (2005) FT-IR study of N2 adsorption on ZnO and HgO modified Na-Y zeolite adsorbents. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Chiong, Meng Choung and Rajoo, Srithar and Romagnoli, Alessandro (2015) Nozzle steam piston expander for engine exhaust energy recovery. In: SAE 2015 11th International Conference on Automotive Engineering, ICAE 2015, 30 March 2015 - 1 April 2015, Bangkok, Thailand.

Chittooparambil, H. J. and Shanmugam, B. and Azam, S. and Kannoorpatti, K. and Jonkman, M. and Samy, G. N. (2019) A review of ransomware families and detection methods. In: 3rd International Conference of Reliable Information and Communication Technology, IRICT 2018, 23-24 Jun 2018, Kuala Lumpur, Malaysia.

Chow, A. W. and Ahmad, Arshad (2004) Two-stage robust estimators for product concentration in a penicillin fermentation. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Dalil, M. and Wirjosentono, Basuki and Koto, Jaswar and Ginting, Armansyah (2021) Load characteristics of cold water pipe based on fibreglass-filled HDPE composites. In: 2020 International Conference on Chemical Science and Technology: Chemical Science and Technology Innovation for a Better Future, ICCST 2020, 8 September 2020, Medan, Indonesia.

Daliman, Shaparas and Syed Abu Bakar, Syed Abdul Rahman and Busu, Ibrahim (2015) Oil palm tree enumeration based on template matching. In: World Virtual Conference on Applied Sciences and Engineering Applications (WVCASEA2015), 27-29 Mar, 2015, Johor Bahru, Johor.

Damiati, Siti Aisyah and Shaikh Salim, Sheikh Ahmad Zaki and Wonorahardjo, Surjamanto and Wong, Nyuk Hien and Rijal, Hom Bahadur (2015) Comfort temperature in air conditioned office buildings: case study of Indonesia and Singapore. In: Malaysia-Japan Joint International Conference 2015 (MJJIC 2015), 13-15 Nov, 2015, Japan.

Daud, Dzurllkanian @ Zulkarnain (2012) Applications of google maps, GPS and GIS in managing taxable property in local authority (case study: Majlis Bandaraya Melaka Bersejarah). In: 7th Symposium Mass Appraisal Valuation Symposium, 11th - 12th July 2012 , Kuala Lumpur, Malaysia .

Daud, Rohaizan and Hussein, Surya Sumarni and Ab. Rahim, Nor Zairah and Ibrahim, Roslina and Ya’acob, Suraya and Abu Bakar, Nur Azaliah (2022) Knowledge communication in government ICT projects: A cross-case analysis study. In: 16th International Conference on Knowledge Management in Organisations, KMO 2022, 11 - 14 July 2022, Hagen, Germany.

Daud, Y. and Hassan, M. Z. and Sarip, S. and Aziz, S. A. and Muhalim, N. A. D. and Raman, N. A. and Jamaludin, K. R. (2015) Mechanical properties of quasi-static and ultrasonic compaction of stainless steel powder metallurgy. In: 6th International Conference on Mechanical & Manufacturing Engineering 2015, 19-21 Oct, 2015, UTHM Johor.

David, A. P. and Yusoff, N. M. and Sulaiman, A. H. and Ismail, A. and Abdullah, F. and Jamaludin, M. Z. (2022) Multiwavelength erbium fiber laser based on Rayleigh backscattering incorporating Lyot Filter. In: 9th IEEE International Conference on Photonics, ICP 2022, 8 - 10 August 2022, Kuala Lumpur, Malaysia.

Decruz, George and Haron, Habibah Norehan and Jamaludin, Khairur Rijal (2021) Cost of equipment failure modelling as a tool for maintenance strategy. In: 6th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2020, 25 November 2020 - 26 November 2020, Virtual, Online.

Derahman, Mohd. Nawi and Zahoor, Muhammad Khurram (2008) Prediction and estimation of capillary pressure of wettability and wettability variations within reservoir. In: 2008 Abu Dhabi International Petroleum Exhibition and Conference, 3-6 November 2008, Abu Dhabi, UAE.

Deris, Safaai and Jumali, R. and Hashim, Suhairul Z. M. and Misman, Muhammad Faiz and Mohamad, Mohd. Saberi (2009) A study of network-based approach for cancer classification. In: 2009 International Conference on Information Management and Engineering, ICIME 2009, Kuala Lumpur, 3rd - 5th Apr 2009.

Desa, M. I. and Illyas, M. I. and Mohd. Bahrudin, Siti Sarah (2011) Tracking and tracing technology for halal product integrity over the supply chain. In: 2011 International Conference On Electrical Engineering And Informatics.

Devandran, A. and Dewika, M. and NorRuwaida, J. and Sara, Y. Y. and Khairunnisa, M. P. (2021) Carbon footprint analysis for Sunway University campus. In: 1st International Conference on Biomass Utilization and Sustainable Energy 2020, ICoBiomasSE 2020, 15 - 16 December 2020, Virtual, Online.

Djamil, Sofyan and Suhot, Mohamed Azlan and Hasan, Mohd. Zaki (2015) Tensile strength polymer matrix composite with reinforcement gigantochloa apus. In: 2nd International Conference on Engineering of Tarumanagara, 22-23 Oct, 2015, Indonesia.

Do, Nguyet Quang and Selamat, Ali and Lim, Kok Cheng and Krejcar, Ondrej (2022) An Improved ensemble deep learning model based on CNN for malicious website detection. In: 35th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2022, 19 - 22 July 2022, Kitakyushu, Japan.

Dobrovolny, Michal and Benes, Jakub and Krejcar, Ondrej and Selamat, Ali (2022) Sperm-cell detection using YOLOv5 architecture. In: 9th International Work-Conference on Bioinformatics and Biomedical Engineering, IWBBIO 2022, 27 - 30 June 2022, Gran Canaria, Spain.

Dobrovolny, Michal and Selamat, Ali and Krejcar, Ondrej (2021) Session based recommendations using recurrent neural networks - Long short-term memory. In: 13th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2021, 7 - 10 April 2021, Phuket, Thailand.

Donasabe Dodo, Joseph and Yahya, Mohd. Hafiz and Kamaruddin, Md. Nor (2007) Investigation on the impact of tropospheric delay on gps height variation near the equator. In: International Conference on Adaptive Structures and Technologies (ICAST 2007), 10-12 December 2007, Accra, Ghana.

Doulatabadi, M. and Yusof, S. M. and Wong, K. Y. (2016) Sustained quality award status in developing country: a study on the Dubai quality award recipients. In: IEOM Detroit Conference, IEOM 2016, 23-25 Sept 2016, Lawrence Technological University Southfield, United States.

Dung, D. T. and Dinh, N. Q. and Tuan, N. T. and Yamada, Y. and Michishita, N. (2016) Simulation methods of a normal-mode helical antenna in a human body condition. In: 9th International Conference on Advanced Technologies for Communications, ATC 2016, 12 October 2016 through 14 October 2016, Vietnam.

Ebrahimian, H. and Noor, N. M. and Rijal, O. M. and Yunus, A. and Kassim, R. M. (2015) Gabor texture measure in interstitial lung disease discrimination using high resolution computed tomography thorax images. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Ebrahimian, H. and Rijal, O. M. and Noor, N. M. and Yunus, A. and Mahyuddin, A. A. (2015) Phase congruency parameter estimation and discrimination ability in detecting lung disease chest radiograph. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Edward, I. I. and Abdul Manaf, N. and Abdul Muthalib, S. A. Tahir and Musram Rakunman, M. R. and Tan, L. S. and Tsuji, T. (2021) Synthesis of graphene oxide via electrochemical process: A short review towards flexible synthesis method. In: Regional Congress on Membrane Technology and Regional Conference on Environmental Engineering (RCOM & RCEnvE 2020), 16 - 17 January 2021, Johor, Malaysia.

Ekramul Mahmud, H. N. M. and Saidina Amin, Nor Aishah and Songip, Ahmad Rahman (1997) Catalytic decomposition of palm oil to liquid fuels and chemicals. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Elfakharany, A. and Yusof, R. and Ismail, Z. (2020) Towards multi robot task allocation and navigation using deep reinforcement learning. In: 4th International Conference on Advanced Technology and Applied Sciences, ICaTAS 2019, 10-12 Sep 2019, Cairo, Egypt.

Elias, N. A. and Samsuri, Noor Asmawati and A. Rahim, Mohamad Kamal and Othman, N. (2012) The effects of human body and bending on dipole textile antenna performance and SAR. In: 2012 Asia-Pacific Microwave Conference (APMC 2012), 4-7 Dec 2012, Ambassador Hotel Kaohsiung Kaohsiung, Taiwan.

Esfandfard, Elnaz and Wahab, Mohammad Hussaini and Che Amat, Rohayah (2020) Is Tehran's public spaces disability friendly? In: 1st International Conference on Urban Design and Planning, ICUDEP 2019, 10 September 2019, Semarang, Indonesia.

Ezaty, S. N. and Zaini, N. and Farahhin, N. J. and Kamarudin, K. S. N. (2019) Hydrogen adsorption capacity using modified nickel-kenaf core at different concentrations. In: 7th Conference on Emerging Energy and Process Technology, CONCEPT 2018, 27-28 Nov 2018, Thistle Hotel Johor, Malaysia.

Ezaty, S. N. and Zaini, N. and Farahhin, N. J. and Kamarudin, K. S. N. (2020) Study of hydrogen adsorption onto kenaf sorbent surface by metal impregnation method. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Fahami, Sheikh Muhammad Hafiz and Zamzuri, Hairi and Mazlan, Saiful Amri and Saruchi, Sarah Atifah (2014) The variable steering ratio for vehicle steer by wire system using hyperbolic tangent method. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, 17-18 May, 2014, Tianjin; China.

Faried, Miftah and Shameli, Kamyar and Ubaidillah, Ubaidillah and Miyake, Mikio and Hara, Hirofumi and Ahmad Khairudin, Nurul Bahiyah (2017) Green synthesis of silver nanoparticles in biopolymer stabilizer and their application as antibacterial efficacy. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

Faruq, A. and Abdullah, S. S. and Marto, A. and Bakar, M. A. A. and Samin, Samin and Mubin, A. (2020) River water level forecasting for flood warning system using deep learning long short-term memory network. In: 2019 3rd International Conference on Engineering and Applied Technology, ICEAT 2019, 30 - 1 November 2019, Sorong, Indonesia.

Fauzi, N. F. and Ali, M. T. and Abd Rahman, N. H. and Yamada, Y. (2016) Accurate feed position designing for Malaysia beam coverage. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Fauzi, N. F. and Ali, M. T. and Rahman, N. H. A. and Yamada, Y. (2016) Optimized parabolic reflector antenna for Malaysia beam coverage. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Feng, Z. and Nakamura, T. and Sato, D. and Kosawada, T. and Kitajima, T. and Umezu, M. (2015) Biomechanics of fibroblast-compacted collagen gels investigated under fibrillar framework. In: 6th International Conference on Mechanics of Biomaterials and Tissues, 6-10 Dec, 2015, USA.

Firdaus, Fulki and Hapsari, Anggit and Fauzi, Hilman and Shapiai, Ibrahim and Fua’Dah, Yunendah (2022) Spatial selection configuration on EEG stroke signal. In: 1st International Conference on Information System and Information Technology, ICISIT 2022, 27 - 28 July 2022, Virtual, Online.

Fong, Wan Heng and Gan, Yee Siang and Sarmin, Nor Haniza and Turaev, Sherzod (2015) The generative capacity of weighted simple and semi-simple splicing systems. In: Simposium Kebangsaan Sains Matematik Ke 23 (SKSM23), 24-26 Nov,2015, Johor Bahru, johor.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin (2005) Optimisation of regeneration unit to achieve zero discharge in a paper mill. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Foudeh, Pouya and Salim, Naomie (2011) Probabilistic ontologies and probabilistic ontology learning: significance and challenges. In: International Conference On Research And Innovation In Information Systems (Icriis 2011).

Frank Wilkins, Luqman Hakeem and Batumalai, Pragathesh and Jasmi, Kamarul Azmi (2019) Media Sosial dan Dampak Positif Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Mas'ud, A. A. and Bani, N. A. (2016) Effect of diffuse radiation on the performance of a rotationally asymmetrical optical concentrator. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Fujita, H. and Selamat, A. (2015) Intelligent software methodologies, tools and techniques 13th international conference, SoMeT 2014 Langkawi, Malaysia, september 22–24, 2014 revised selected papers. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools and Techniques, SoMeT 2014, 22 - 24 September 2014, Langkawi, Malaysia.

Fukuda, Kanao (2012) An attempt at analyzing chronological changes in adhesive wear. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao (2012) An attempt at analyzing chronological changes in adhesive wear-2. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao (2012) Influences of trace impurities in hydrogen on tribological properties of austenitic stainless steel. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao and Mohd. Radzi, Muhammad Faidhi and Subhi, Zaid Ali and A. Manaf, Noor Dalilah (2018) Influences of surface roughness on water adsorption on austenitic stainless steel. In: Proceedings of Asia International Conference on Tribology 2018.

Ghani, Z. A. and Anuar, A. N. and Majid, Z. A. and Yoneda, M. (2015) Multimedia environmental fate and transport model of dichlorodiphenyltrichloroethane (DDT): case study sayong river watershed. In: The 2nd IWA Malaysia Young Water Professionals Conference 2015, 17-20 Mac, 2015, Kuala Lumpur, Malaysia.

Ghazali, N. S. and Baharun, S. and Islam, A. K. M. M. and Wada, K. (2016) Adaptive tree-based routing for multi-channel wireless sensor network. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Dhaka; Bangladesh.

Ghumman, Ali Shaan Manzoor and Shamsuddin, Rashid and Nasef, Mohamed Mahmoud and Yahya, Wan Zaireen Nisa and Abbasi, Amin (2022) Preparation and characterization of inverse vulcanized copolymers using taramira oil. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 - 5 November 2021, Gambang, Kuantan, Malaysia.

Goh, Kian Mau and Mahadi, Nor Muhammad and Hassan, Osman and Raja Abdul Rahman, Raja Noor Zaliha and Md. Illias, Rosli (2005) Purification and characterization of recombinant enzyme CGTase G1. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Gorment, Nor Zakiah and Selamat, Ali and Krejcar, Ondrej (2021) A recent research on malware detection using machine learning algorithm: Current challenges and future works. In: 7th International Conference on Advances in Visual Informatics, IVIC 2021, 23 - 25 November 2021, Kajang, Selangor, Malaysia.

Goudarzi, S. and Hassan, W. H. and Soleymani, S. A. and Zakaria, O. and Jivanadham, L. B. (2016) Artificial bee colony for vertical-handover in heterogeneous wireless networks. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Gozali, Lina and Hetty Karunia Tunjungsari, Hetty Karunia Tunjungsari and M. Zagloel, Teuku Yuri and Docki Saraswati, Docki Saraswati and Tjahjono, Benny and Simatupang, Togar Mangihut and Singgih, Moses Laksono and Masrom, Maslin and Harun, Habibah @Norehan and Sutopo, Wahyudi (2021) A dynamic business modelling approach to design and experiment new successful business incubator model for Indonesia. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 - 11 March 2021, Virtual, Online.

H., Nurul Hafizah and Setan, Halim and Majid, Zulkepli (2008) Three dimensional modeling using close range photogrametry for historical artifact. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Halim, Noor Azlina and Nasri, Noor Shawal and Songip, Ahmad Rahman (2005) Characterization of CoNi based catalyst for water gas shift reaction. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza (2021) An efficient fog-based attack detection using ensemble of MOA-WMA for internet of medical things. In: The 5th International Conference of Reliable Information and Communication Technology 2020, 21 - 22 December 2021, Langkawi, Malaysia.

Hameed, Shilan S. and Selamat, Ali and Abdul Latiff, Liza and A. Razak, Shukor and Krejcar, Ondrej (2022) WHTE: Weighted Hoeffding Tree Ensemble for Network Attack Detection at Fog-IoMT. In: 35th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2022, 19 - 22 July 2022, Kitakyushu, Japan.

Hamid, S. and Ali, M. T. and Abd Rahman, N. H. and Pasya, I. and Yamada, Y. and Michishita, N. (2016) Accuracy estimations of a negative refractive index cylindrical lens antenna designing. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Hamilludin, Ummi Nurhidayati Ardhiah and Abdullah, Haslaile and Bani, Nurul Aini and Mohd. Noor, Norliza and A. Jalil, Siti Zura and Ismail, Siti Haida (2022) Power usage modelling and prediction using artificial neural networks. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Hamrayev, H. and Shameli, K. (2021) Biopolymer-based green synthesis of zinc oxide (ZnO) nanoparticles. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Hamza, M. G. and Latiff, L. A. and Alfagi, A. S. (2016) Influence of ellipsoid dust Particle Size Distribution on microwave and millimeter wave frequencies. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, Bangladesh.

Hamza, Mohd. Ghazali and A. Latiff, Liza and Mustafa, Eltayeb M. and Gasim, Waleed M. (2017) Radio propagation and troposphere parameters effect for Microwave links in Sudan. In: 2017 International Conference on Communication, Control, Computing and Electronics Engineering, ICCCCEE 2017, 16 - 17 January 2017, Khartoum, Sudan.

Haron, H. N. and Harun, H. and Ali, R. and Salim, K. R. and Hussain, N. H. (2015) Self-regulated learning strategies between the performing and non-performing students in statics. In: 2014 International Conference on Interactive Collaborative Learning, ICL 2014, 3 - 6 December 2014, Dubai, United Arab Emirates.

Haron, H. N. and Hussain, N. H. and Mohammad, R. and Ahmad, N. and Abdul Talib, H. H. and Hassan, M. Z. and Kutty, R. M. and Sarip, S. (2019) Grooming future scientists and engineers from the root through fun learning concept. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Haron, H. N. and Kamaruddin, S. A. and Harun, H. and Abas, H. and Salim, K. R. (2019) Science, technology, engineering and mathematics initiatives at rural schools and its impact on learning motivation. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur Convention Centre Kuala Lumpur, Malaysia.

Haron, Habibollah and Wulandhari, Lili A. and Sallehuddin, Roselina (2011) The mapping algorithm of triangular vertex chain code from thinned binary image. In: Second International Conference On Recent Trends In Information Processing & Computing (Ipc 2011).

Haron, Nuzul Azam and Devi, P. and Hassim, Salihuddin and Alias, Aidi Hizami (2018) Project management practice and its effects on project success in Malaysian construction industry. In: 1st International Conference on Architecture and Civil Engineering, ICACE 2017, 8 May 2017 through 9 May 2017, Armada Hotel Petaling Jaya, Malaysia.

Haronzah, Muhammad Fairman and Mani, Inthiran and Wan Embong, Wan Hassan (2019) Media Sosial dan Facebook Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Harun, Aizul Nahar and Syarifah Hasanah, Syarifah Hasanah (2018) Significant overview of Japan tourism: Muslim friendly destination and social media. In: 1st Economics and Business International Conference 2017 (EBIC 2017).

Harun, G. and Sarip, Shamsul and Abdul Fatah, A. Y. and M. Kaidi, H. and Abd. Rahim, N. (2021) Wind, hydro and solar energy challenges for technical vocational and training (TVET) electrical entrepreneur in Malaysia: a review. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 June 2021 - 24 June 2021, Kuala Lumpur, Malaysia, Virtual.

Harun, Mohd Razif and N. H. N., Hadzuin and Triwahyono, Sugeng and Abdul Jalil, Aishah (2007) Synthesis of zeolite A by ultrasound irradiation technique. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Sciences (ICoMS 2007), May 28-29, 2007, Ibnu Sina Institute, UTM.

Harun, Mohd. Razif and Shuhada, A. N. and Triwahyono, Sugeng and Abdul Jalil, Aishah (2007) Microwave irradiation technique for synthesis of zeolite A. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May-1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Harun, Muhammad Arif and Che Sidik, Nor Azwadi (2020) A review on preparation of nanocellulose for new green working fluid in heat transfer application. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Harun, Muhammad Faris and Ismail, Siti Haida and Abdul Raman, Norazmein and Abdullah, Haslaile (2021) Ergonomics risk factors and musculoskeletal discomfort among offshore support vessel deck and engine crews. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 November 2021 - 10 November 2021, Virtual, Online.

Harun, Noorlisa and Ibrahim, Kamarul Asri (2004) Fault detection and diagnosis, FDD via improved univariate statistical process control charts, USPC. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Hasan, N. A. and Goto, M. and Miyamoto, K. (2020) Analytical method on reliability of rainfall data from X-band polarimetric radar. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Hasbollah, Nur Syahirah and Md Rashid, Marjan and Ihwani, Siti Suhaila (2019) Media Sosial dan Pelajar Universiti Menurut Islam. In: Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Hasbullah, Hasrinah and Ismail, Ahmad Fauzi and Ng, B. C. and Abdullah, M. S. (2005) Effect of solvent types on structure and performance of polyethersulfone nanofiltration membrane in monovalent and divalent ions separation. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Hashim, Jasmi and Ahmad, Norhayati and Nakamura, Yuzo and Md. Salmin, Fakhrullah and Abubakar, Mu'Azu and Mohd. Noor, Siti Fawziah and Mohd. Zaidan, Nurhanna (2015) Clay based ceramic membrane for heavy metal removal from effluent lake water. In: 13th Global Conference on Sustainable Manufacturing, 16-18 Sept, 2015, Vietnam.

Hashim, Mazlan and Seeni Mohd., Mohd. Ibrahim and Kanniah, Kasturi (2002) Remote sensing sducation in Malaysia: A systematic approach at Universiti Teknologi Malaysia. In: FIG XXII International Congress, 19-26 April 2002, Washington, D.C. USA.

Hasnidawani, J. N. and Azlina, H. N. (2019) Surface roughness of zno-sio2 nanocoating. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, Kuala Lumpur, Malaysia, 25-26 Nov 2019.

Hasri, Hudzaifah and Mohd. Aris, Siti Armiza and Ahmad, Robiah (2021) Linear regression and Holt's Winter Algorithm in forecasting daily coronavirus disease 2019 cases in Malaysia: Preliminary study. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 - 10 November 2021, Virtual, Online.

Hassan, Azman and Lim, J. W. and Wahit, Mat Uzir and Rahmat, Abdul Razak (2004) Preliminary studies on the effect of polyethylene octene elastomer on polypropylene nanocomposite: mechanical properties and phase morphology. In: Proceedings of 13th Scientific Conference & 14th Annual General Meeting Electron Microscopy Society of Malaysia 2004, 13-15 December 2004, The Palm Garden Hotel, Putrajaya.

Hassan, Azman (1997) The application of instrumented falling weight impact test to determine the ductile-brittle transition in acrylate rubber-modified PVC. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Hassan, Azman and Kamal, Mohd. Nazlee and Yunan, Mat Hussin (1992) UTM's role in the development of Malaysian natural resources industries. In: Conference On Development On Malaysian Natural Resources, 29-30 September 1992, Bilik Jumaah, Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Hassan, Azman and Othman, N. and Wahit, Mat Uzir and Lim, J. W. and Rahmat, A. R. and Mohd. Ishak, Z. A. (2005) Maleic anhydride polyethylene octene elastomer toughened polyamide 6/polypropylene nanocomposites: mechanical and morphological properties. In: The 8th International Symposium on Polymers For Advanced Technologies, 13-16 September, 2005, Budapest, Hungary.

Hassan, Mohamad Zaki and Nasruddin, Muhammad Asyraf and Salit, Mohd. Sapuan and Yusoff, Mohd. Zuhri (2018) Effect of cell size on the compressive properties of interlocking flax composite structures. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka..

Hassan, Onn (1997) Particle mixing in liquid fluidised beds. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Hassan, Azman and Wahit, Mat Uzir and Ching, Yern Chee (2002) Effect of LLDPE on impact, flexural and morphological properties PP/NR blend. In: 11th Scientific Conference & 12th Annual General Meeting of The Electron Microscopy Society of Malaysia 2002, 17-18 December 2002, The Eden Garden Hotel, Johor Bahru, Johor. (Unpublished)

Helman, Nur Arina Ayuni and Mohammed Amin, Muhamad Kamal (2020) The effects of neurofeedback on Event Related Potential (ERP) in zikr meditation. In: 1st International Conference on Smart Information and Communication Technologies, SmartICT 2019, 26 - 28September 2019, Berkane, Morocco.

Heng, B. and Oeurng, E. and Try, S. and Yuzir, A. (2019) Flow regime alteration analysis under climate change in Tonle Sap Subbasin. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Heng, H. Y. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2004) Fault diagnostic algorithm for precut fractionation column. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Hong, W. X. and Sidik, N. A. C. and Saidur, R. (2020) Effect of surfactants on thermal conductivity of graphene based hybrid nanofluid. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Hudha, K. and Nuri, N. R. M. and Mazlan, S. A. (2019) Multi-objective optimization of vehicle speed control using gravitational search algorithm for electro-mechanical continuously variable transmission. In: International Conference on Recent Advances on Industrial Engineering and Manufacturing 2018, ICRAIEM 2018, 12-13 Dec 2018, Mercure Penang Beach Hotel Penang, Malaysia.

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2013) Time-frequency signal analysis in machinery fault diagnosis: review. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mustafa, Azeman (2005) Experimental and numerical studies of fluidization in a circulating fluidized bed. In: International Energy Conference 2005, 5-7 August 2005, Jakarta.

Hussain, Ahmad and Ani, Farid Nasir and Mustafa, Azeman and Mamat, Zainul Asri and Zardi, Zulfadhly and Abdul Aziz, Abdul Aziz (2005) Combustion studies of blended fuel oil as an alternative fuel for industrial gas turbines (AFTUR) and controlling NOx and soot emissions. In: 3rd Pakistan Oil, Gas & Energy Exhibition 2005, 19-20th May 2005, Karachi Expo Center, Pakistan.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Adnan, Mohammed Fadzil and Surjosatyo, Adi and Mustafa, Azeman and Salema, Arshad A. (2005) Combustion modeling of municipal waste combustor. In: 18th International Conference on Fluidized Bed Combustion (FBC 2005), May 22-25, 2005, Toronto, Ontario, Canada.

Hussain, Mohd. Nasir (2004) Rekabentuk Industri Dalam Menjana Kretiviti Jurutera. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Hussain, Noor Hamizah and Haron, Habibah @ Norehan (2018) Fun learning toy library as a passage to shape future scientists and enginners. In: Proceeding Of New Academia Learning Innovation NALI 2018 Exhibition & Competition.

Hussain, Syed Aamer and Ahmad, Norulhusna and Anwar, Khoirul (2022) Practical soft demapper-based decoder for sparse code multiple access. In: 27th Asia-Pacific Conference on Communications, APCC 2022, 19 - 21 October 2022, Jeju Island, South Korea.

Hussein, N. and Rashid, M. and Hashim, N. H. and Jamian, N. R. and Che Hassan, C. N. H. (2019) Theoretical performance of a multi-cyclone fine particulate emission control system. In: 3rd International Conference on Architecture and Civil Engineering 2019, ICACE 2019, 26-27 June 2019, Seri Pacific Hotel, Kuala Lumpur, Malaysia.

Hussein, S. S. and Mahrin, M. N. and Maarop, N. and Abu Bakar, N. A. (2019) Content validation of an enterprise architecture (ea) readiness assessment instrument. In: International Conference on Information System, Computer Science and Engineering, 26-27 Nov 2018, Palembang, Indonesia.

Hussein, Surya Sumarni and Ismail, Zuraini and Mahrin, Mohd. Naz’ri and Abdullah, Mohd. Shahidan and Ab. Rahim, Nor Zairah and Samy, Ganthan Narayana and Mat Taib, Mohamad Zainuddi (2017) Towards designing an EA readiness instrument: A systematic review. In: 4th IEEE International Colloquium on Information Science and Technology, CiSt 2016, 24 - 26 October 2016, Tangier-Assilah, Morocco.

Hussin, Husnayati and Ismail, Zuraini and Suhaimi, Mohd. Adam and Abdul Karim, Noor Shahriza (2006) Examining factors influencing IT outsourcing success in Malaysian organizations. In: Australasian Conference on Information Systems (17th : 2006 : Adelaide, Australia), 6-8 Dec 2006, Adelaide.

Hussin, Nor Afina Eidura and Johari, Anwar and Kidam, Kamarizan and Hashim, Haslenda (2014) Major hazards of process equipment failures in the chemical process industry. In: 5th International Graduate Conference on Engineering, Science & Humanity (IGCESH 2014), 19-21 Aug, 2015, Johor Bahru, johor.

Hustak, Tomas and Krejcar, Ondrej and Selamat, Ali and Mashinchi, Reza and Kuca, Kamil (2015) Principles of usability in human-computer interaction driven by an evaluation framework of user actions. In: 12th International Conference on Mobile Web and Intelligent Information Systems, MobiWis 2015, 24 - 26 August 2015, Rome, Italy.

Ibrahim, M. S. and Hassan, M. Z. and Ibrahim, I. and Ibrahim, M. H. and Daud, M. Y. and Bani, M. A. (2019) Life-cycle assessment on the highway street lantern using weibull probability approach. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor, Malaysia.

Ibrahim, Mohd Halim Irwan and Muhamad, Norhamidi and Sulong, Abu Bakar and Jamaludin, Khairur Rijal and Mohamad Nor, Nor Hafiez and Ahmad, Sufizar and Harun, Mohd Ruzi and Zakaria, Hafizawati (2010) Parameter optimization towards highest micro MIM density by using Taguchi method. In: 9th Asia-Pacific Conference on Materials Processing, APCMP2010, 7 June 2010 through 10 June 2010, Sydney, NSW, Australia.

Ibrahim, N. A. and A. Rahman, S. A. S. and Ismail, S. H. and Abdullah, H. (2020) Musculoskeletal discomfort evaluation using quick exposure check (QEC) among tower crane operators. In: 6th International Conference on Advances in Mechanical Engineering 2019, ICAME 2019, 14 August 2019 - 16 August 2019, Pacific Sutera Harbour Kota Kinabalu, Sabah, Malaysia.

Ibrahim, Noraini and Wan Kadir, Wan Mohd. Nasir and Deris, Safaai (2008) Comparative evaluation of change propagation approaches towards resilient software evolution. In: Proceedings - The 3rd International Conference on Software Engineering Advances, ICSEA 2008, Includes ENTISY 2008: International Workshop on Enterprise Information Systems, 26-31 Oct. 2008.

Ibrahim, Roslina and Azami, Husna Hafiza and Masrom, Suraya and Magalingam, Pritheega and Yaacob, Suraya and Aljuaid, Nada Mansour (2022) Towards an integrated educational games evaluation model: a review of study. In: 4th International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2022, 9 June 2022 - 11 June 2022, Ankara, Turkey.

Ibrahim, Roslina and Ismail, Rozana (2018) Fun elements in educational game design to boost students learning experience. In: New Academia Learning Innovation (NALI) Symposium 2018.

Ibrahim, Roslina and R. Azami, Husna Hafiza (2018) A systematic literature review on acceptance of massive open online courses (MOOCS). In: New Academia Learning Innovation (NALI) Symposium 2018.

Ibrahim, Suhaimi and Muhammad, Shahid (2011) An evaluation of test coverage tools in software testing. In: International Conference On Telecommunication Technology And Application (Ictta 2011).

Ibrahim, Kamarul 'Asri (1997) Application of partial correlation in active statistical process control. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Idris, Ani and Ahmad, Iqbal (2007) Cellulose acetate-polyethersulfone (CA-PS) blend ultrafiltration membranes for palm oil mill effluent treatment. In: International Conference on Environment: Survival and Sustainbility 2007, 19-24 February 2007, Nicosla-Northen Cyprus.

Idris, Ani and Ahmed, Iqbal and Ho, Wan Jye (2007) Performance of cellulose acetate-polyethersulfone blend membrane prepared using microwave heating for palm oil mill effluent treatment. In: International Conference on Water Management and Technology Applications in Developing Countries, 14-16 May 2007, Kuala Lumpur Convention Centre, Malaysia.

Idris, Ani and Lee, Kuan Yet (2005) Effect of solvent/additives ratio on cellulose acetate dialysis membrane formation and urea clearance. In: Advanced Technology Congress, 6-8 December 2005, Putrajaya Marriott Hotel, Putrajaya.

Idris, Ani and Mat Zain, Norashikin (2005) Concentration influence of different additives on performance of asymmetric polyethersulfone (PES) ultrafiltration flat sheet membranes. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Idris, Ani and Wahidin, Suzana (2005) Effect of Na-alginate and bead diameter on lactic acid production from pineapple waste using immobilized Lactobacillus delbrueckii ATCC 9646. In: The 4th Asia-Pasific Chemical Reaction Engineering Symposium APCRE 05, June 12-15, 2005, Gyeongju, Korea.

Idris, Ani and Wahidin, Suzana (2004) Effect of temperature and pH on lactic acid fermentation from liquid pineapple waste using immobilized lactobacillus delbrueckii ATCC 9649. In: Regional Symposium on Chemical Engineering 2004, December 1-3, 2004, The Grand Hotel, Bangkok, Thailand.

Idris, Ani and Ahmed, Iqbal and Nihal Ah., Ansari Akhlaque Ah. and Mohd Noor, Nur Diana (2007) Influence of lithium flouride additive on polyethersulfone membranes. In: 14th Regional Symposium On Chemical Engineering 2007, December 4-5, 2007, Melia Purosani Hotel, Yogyakarta, Indonesia.

Idris, Ani and Chan, Mieow Kee and Ahmed, Iqbal (2007) Effect of monosodium glutamate additive on the performance of dialysis membrane. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia.

Illias, Nur Hasniza and Maarop, Nurazean and Hassan, Noor Hafizah and Samy, Ganthan Narayana (2021) A prelim investigation on social media usage as risk communicational platform for Klang Valley flash flood management. In: 7th International Conference on Research and Innovation in Information Systems, ICRIIS 2021, 25 - 26 October 2021, Johor Bahru, Malaysia.

Ilmasari, D. and Yuzir, A. (2022) The applications of aerobic granular sludge for leachate treatment: A review. In: 9th AUN/SEED-Net Regional Conference on Natural Disaster, RCND 2021, 15 December 2021 - 16 December 2021, Virtual, Online.

Imtihan, Muhammad Rofi and Ngadiman, Mohd. Salihin and Haron, Habibollah (2008) An alternative model for ERP maintenance strategy. In: Proc. 9th ACIS Int. Conf. Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing, SNPD 2008 and 2nd Int. Workshop on Advanced Internet Technology and Applications , 6-8 Aug. 2008 .

Inn, Arba’Iah and Hassan, Rosilah and Daud, Zaimah and Usman, Sahnius (2022) Internet of Things for smart solar energy: An IoT farm development. In: 2022 International Conference on Business Analytics for Technology and Security, ICBATS 2022, 16 - 17 February 2022, Dubai, United Arab Emirates.

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni (2021) COVID-19 paradigm shift: Exploring effects on entrepreneurial phase ventures. In: 2021 International Congress of Advanced Technology and Engineering, ICOTEN 2021, 4 - 5 July 2021, Virtual, Online.

Iqbal, T. and Rani, W. N. M. W. M. and Wahab, M. H. (2020) Regenerating the identity in historic waterfront: A case study of Central Market Waterfront, Kuala Lumpur. In: 10.1088/1755-1315/409/1/0120011st International Conference on Urban Design and Planning, ICUDEP 2019, 10September 2019, Semarang, Indonesia.

Irwan, M. A. M. and Nor Azwadi, C. S. and Asako, Y. (2020) Revisiting tin melting for phase change model verification. In: International Conference on Sustainable Energy and GreenTechnology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Ishak, Iryatie and Muhammad, Ida Idayu (2007) The development of biodegradable plastic with natural colourant as packaging material. In: National Research And Innovation Competition (NRIC) 2007.

Ishak, Norafeezah and Dziyauddin, Rudzidatul Akmam and Abdullah, Haslaile (2015) Supplier selection procedure in telecommunication industry. In: International Conference on Business, Management, Tourism and Hospitality 2015 (BIZMATOUR 2015), 12-14 May, 2015, Melaka, Malaysia.

Ishihara, Ryota and Sakakibara, Kunio and Kikuma, Nobuyoshi and Sugimoto, Yoshiki and Yamada, Yoshihide and Abd. Rahman, Nurul Huda (2021) Measured performance of high gain dielectric lens antenna in 300 GHz band. In: 2020 International Symposium on Antennas and Propagation, ISAP 2020, 25 - 28 January 2021, Virtual, Osaka.

Islam, A. K. M. Muzahidul (2012) A collision detection enabled dynamic cluster-based wireless sensor network. In: MJIIT-JUC Symposium 2012 (MJJS2012), 21-23/12/12.

Ismail, Ahmad Fauzi and Khoo, T. C. and Kusworo, T. D. (2005) Performance of sealed lead acid battery enhanced by gas separation membrane technology. In: International Membrane Conference in Taiwan, 2005 (IMCT 2005), Aug. 18-19, Chung-Li, Taiwan.

Ismail, Ahmad Fauzi and Kusworo, T. D. (2005) Advanced materials for membrane-based gas separation technology. In: 3rd Regional Symposium On Membrane Science and Technology 2005 , 26-27 April.

Ismail, Ahmad Fauzi and Kusworo, Tutuk Djoko and Mustafa, Azeman and Hasbullah, Hasrinah (2005) Understanding the solution-diffusion mechanism in gas separation membrane for engineering students. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

Ismail, Ahmad Fauzi and Lai, Ping Yean (2001) Application of membrane separation in biotechnology. In: National Biotechnology Seminar 2001, 10-13 November 2001, Pulau Pinang. (Unpublished)

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. (2006) Effect of coagulation bath temperature and polymer composition on the fabrication and characteristics of PAN precursor fiber in the solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. (2006) On the fabrication and characteristics of PAN precursor fiber in the solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. and Ng, B. C. and Hasbullah, Hasrinah and Rahaman, M. S. A. and Abdullah, M. S. (2006) Effects of residence time on the characteristics of PAN-based fibers and its fabrication through solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, N. A and O'Brien, E. A (2008) Enabling multimodal interaction in web-based personal digital photo browsing. In: International Conference on Computer and Communication Engineering 2008, 13 to 15 May 2008 , Kuala Lumpur. (Unpublished)

Ismail, Zuraini (2006) Moderating Impact of IT Outsourcing Arrangements in a Muslim Country. In: International Conference on ICT for Islam (ICT4M) 2006 (2006 : Kuala Lumpur, Malaysia), 21-23 November 2006, Hilton Hotel Kuala Lumpur, Malaysia.

Ismail, Abdul Samed and Shamsuddin, Siti Mariyam and Ali, Waleed (2011) Intelligent web proxy caching approaches based on support vector machine. In: The International Conference On Informatics Engineering & Information Science (Icieis 2011).

Ismail, Mohd Shawal and Khor, Shaw Zhan and Mohamad, Ahmad Marzuki (2019) Media Sosial dan Impak Terhadap Psikologi Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Ismail, N. A. and Shameli, K. and Che Jusoh, N. W. and Rasit Ali, R. (2020) Effect of size and shape dependent of synthesized copper nanoparticle using natural honey. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Ismail, N. A. and Shameli, K. and Che Jusoh, N. W. and Rasit Ali, R. and Mohamad Sukri, S. N. A. and Mohamed Isa, E. D. (2021) Preparation of copper nanoparticles by green biosynthesis method: A short review. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Ismail, R. and Ibrahim, R. and Yaacob, S. (2019) Participatory design method to unfold educational game design issues: a systematic review of trends and outcome. In: 5th International Conference on Information Management, ICIM 2019, 24-27 March 2019, Trinity Hall, University of Cambridge, Cambridge, United Kingdom.

Ismail, Syuhaida and Ismail, Syuhaida and Mohd. Arof, Khairul Zahreen (2018) Current practice, understanding and perception on contactors performance appraisal system in the Malaysian construction industry. In: 2nd International Conference on Architecture and Civil Engineering (ICACE 2018).

Ismail, Syuhaida and Saleh, Abd. Latif and Mohd. Arof, Khairul Zahreen (2018) Critical success factors of contractors performance appraisal system in Malaysian construction industry. In: The 5th International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2018).

Ismail, Syuhaida and Wahab, Mohammad Hussaini and Che Amat, Rohayah and Wan Mohd. Rani, Wan Nurul Mardiah and Zakaria, Zaamuddin (2018) Fire hazard assessment during construction phase: case study of a mixed-use development project in Kuala Lumpur. In: 2nd International Conference on Architecture and Civil Engineering (ICACE 2018).

Ismail, Zamri (2012) Accuracy assessment Of Digital Elevation Model (DEM) from airborne lidar over different land cover types in Malaysia. In: 11th International Symposium & Exhibition on Geoinformation (ISG2012), 2012.

Ismail, Zuraini and Hussin, Husnayati and Suhaimi, Mohd. Adam and Abdul Karim, Nor Shahriza (2005) Knowledge sharing role in IT outsourcing. In: International Conference on Knowledge Management (ICKM) 2005, 7 - 9th July 2005, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Ismail, Zuraini and Sabeil, Elfadil and Abdul Manaf, Azizah (2011) Analysing the quality assurance of trainee's competency assessment and acrediation of cyber forensic education/training programs. In: 2011 The 3rd International Conference On Machine Learning And Computing (ICMLC 2011).

Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Fletcher, Jasmine Baun and Abd. Kadir, Hasannuddin (2017) Engine performance and exhaust emission analysis of a single cylinder diesel engine fuelled with water-diesel emulsion fuel blended with manganese metal additives. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang, Malaysia.

Iwamoto, Koji and Saleh, Edziani Nabila and Hanawa, Yutaka and Suhaimi, Noraiza and Kaha, Marshila and Yahya, Nurul Ashyikin and Hara, Hirofumi and Sugiura, Norio and Goto, Masafumi and Mohamad, Shaza Eva and Mad Nordin, Mariam Firdaus and Shameli, Kamyar and Shiraiwa, Yoshihiro (2015) Biomass production and nutrient removal by spontaneous grown green algae oedogonium sp. from a pond in University of Tsukuba. In: International Conference on Sustainability Initiatives (ICSI 2015)in conjunction with 8th ASEAN Environmental Engineering Conference (AEEC), 24-25 August, 2015, Kuala Lumpur, Malaysia.

J., NorRuwaida and M., Dewika and S., Shahidana and M., Rashid and Md. Ali, Abd. Halim and M. P., Khairunnisa and Ammar, M. R. and Zahiruddin, S. and Y. Y., Sara (2020) Effect of additives on the ash element from combustion of palm fiber and shell. In: 2nd International Conference on Green Environmental Engineering and Technology 2020, IConGEET 2020, 23 - 24 July 2020, Seoul, Virtual.

Jaafar, Noraini (1992) Sustainable development in perspective, definition, concepts and policy issues. In: Conference On Development On Malaysian Natural Resources, 29-30 September, 1992, Bilik Jumaah, Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Jaafar, N. F. and Ahmad, Z. H. and Jusoh, N. W. C. and Nagao, Y. (2019) X-ray diffraction and spectroscopic studies of microwave synthesized mesoporous titania nanoparticles for photodegradation of 2-chlorophenol under visible light. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Jafri, Hasnora and Ali, Mohamad Wijayanuddin and Ahmad, Arshad and Kamsah, Mohd. Zaki (2005) Effective occupational health and safety performance measurements. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Jagamogan, Reevan Seelen and Ismail, Saiful Adli and Hassan, Noor Hafizah and Abas, Hafiza (2022) Penetration testing procedure using machine learning. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Jagamogan, Reevan Seelen and Ismail, Saiful Adli and Hassan, Noor Hafizah and Abas, Hafiza (2021) A review: Penetration testing approaches on Content Management System (CMS). In: 7th International Conference on Research and Innovation in Information Systems, ICRIIS 2021, 25 - 26 October 2021, Johor Bahru, Malaysia.

Jalil, Suhana and Mohd. Yusof, Mohd. Rashid and A. S., Afidah (2015) Evaluation of external radiological hazard in bottom and fly ash from coal fired pilot plant. In: International Conference on Sustainability Initiatives, 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Jamaludin, K. R. and Talib, H. H. A. and Shah, S. A. R. (2019) Integrated quality environmental management practices and its impact on operational and environmental performances in food processing SMEs. In: 9th International Conference on Industrial Engineering and Operations Management, IEOM 2019, 5-7 March 2019, JW Marriott Hotel Bangkok, Thailand.

Jambak, Muhammad Ikhwan and Haron, Habibollah and Nasien, Dewi (2008) Development of robot simulation software for five joints mitsubishi RV-2AJ robot using MATLAB/Simulink and V-Realm Builder. In: Fifth International Conference on Computer Graphics, Imaging and Visualization, 26-28 Aug. 2008.

Jamian, Syahirah and Gunawan, Teddy Surya and Kartiwi, Mira and Ahmad, Robiah and Abdul Kadir, Kushsairy and Nordin, Muhammad Noor (2022) Human activity and posture classification using smartphone sensors and matlab mobile. In: 2022 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2022, 16 - 19 May 2022, Ottawa, Canada.

Jamil, A. H. A. and Fathi, M. S. (2016) The integration of lean construction and sustainable construction: a stakeholder perspective in analyzing sustainable lean construction strategies in Malaysia. In: Conference on ENTERprise Information Systems / International Conference on Project MANagement / Conference on Health and Social Care Information Systems and Technologies, CENTERIS / ProjMAN / HCist 2016, 5-7 Oct 2016, Portugal.

Japar, W. M. A. A. and Sidik, N. A. C. and Saidur, R. and Asako, Y. and Muhammad, N. M. (2020) Thermal performance analysis in sinusoidal-cavities-ribs microchannel heat sink with secondary channel geometry for low pumping power application. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Jasmi, Kamarul Azmi (2016) Pendidikan sebagai medium penerapan Islam dalam sains dan teknologi. In: Persidangan Islam dalam Sains dan Teknologi 2016 (PIST’16), 13-15 Oktober 2016, Dewan Senat, Universiti Teknologi Malaysia, Skudai Johor. (Unpublished)

Jasmi, Kamarul Azmi (2016) Penghasilan buku penyelidikan daripada tesis Pengajian Islam dan Pendidikan Islam. In: Bengkel Penulisan dan Penerbitan Akademik, 29hb Ogos 2016, Bilik Mesyuarat, Fakulti Tamadun Islam, Kampus Kuala Lumpur City, Universiti Teknologi Malaysia.

Jensani, Muhammad Khairul Nizam and Eswaran, Kumanan and Mohd Noor, Sulaiman Shakib (2019) Media Sosial dan Pembentukan Budaya Menurut Islam. In: Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Jeremiah, P. and Samy, G. N. and Shanmugam, B. and Ponkoodalingam, K. and Perumal, S. (2019) Potential measures to enhance information security compliance in the healthcare internet of things. In: 3rd International Conference of Reliable Information and Communication Technology, IRICT 2018, 23-24 Jun 2018, Kuala Lumpur, Malaysia.

Johari, Muhammad Hazwan and Baharuddin, Amirul Syafiq and Ihwani, Siti Suhaila (2019) Media Sosial dan Kelestarian Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Jonet, Mohd Anuar and Md. Illias, Rosli (2007) Isolation of maltogenic amylase gene from bacillus licheniformis TH-1. In: The 32nd Annual Conference Of The Malaysian Society For Biochemistry And Molecular Biology, 5th-6th September 2007, Eastin Hotel, Petaling Jaya.

Junin, Radzuan and Abd. Karim, Khairuddin (1991) Kajian minerologi dan fiziko-kimia ke atas lempung bentonit tempatan (Lahad Datu) dan menilai kegunaannya sebagai lempung peluntur. In: Kertas Kerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), 18 November 1991, UTM Kuala Lumpur.

Jusoh, Mohd. Zamri and Din, Nazli Che and Dimon, Mohamad Ngasri (2015) Comparison of normal incidence sound absorption coefficient of direct piercing carved wood panels with circular, geometry and floral motifs. In: 5th International Conference on Noise, Vibration and Comfort ( NVC 2015 ), 1-3 Dec, 2015, Melaka, Malaysia.

K., Omar and Jhonny, Jhonny (2009) Crustal deformation study in Peninsular Malaysia using global positioning system. In: Postgraduate Seminar Faculty of Geoinformation Science & Engineering, 2009, Institut Ibnu Sina UTM, Skudai.

K. H., Sharkawi and Ujang, Muhamad Uznir and Abdul Rahman, Alias (2008) 3D navigation system for virtual reality based on 3D game engine. In: International Society of Photogrammetry and Remote Sensing Congress 2008, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Kadir, N. A. A. and Saris, N. N. H. and Irawati, N. and Hamzah, A. (2020) Low-cost temperature sensing using d-shaped optical fiber. In: 8th IEEE International Conference on Photonics, ICP 2020, 16-18 May 2020, Kota Bharu, Kelantan.

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2016) Investigation of electromagnetics radiation for stroke patients and non-stroke participants. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Kadir, R. S. S. A. and Murat, Zunairah and Taib, M. N. and A. Jalil, Siti Zura (2017) The characteristics of human body electromagnetic radiation frequencies for stroke patients and non-stroke participants. In: 2017 IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2017, 24 - 25 April 2017, Langkawi Island, Kedah.

Kamal Azam, Kamil Hafizudin and Zainal Abidin, Mohd. Zaki and Abu Husain, Mohd. Khairi and Jaafar, A. Bakar and Mohd. Zaki, Noor Irza and Abd. Aziz, Farah Nora Aznieta (2022) Evaluation of hybrid ocean thermal energy conversion system plantwide performance. In: 9th Conference on Emerging Energy and Process Technology 2021, CONCEPT 2021, 24 November 2021 - 25 November 2021, Johor Bahru, Johor, Malaysia.

Kamaludin, K. N. and Abdullah, L. and Maslan, M. N. and Zamri, R. and Mat Ali, M. and Syed Mohamed, M. S. and Noorazizi, M. S. (2020) Utilization of analytical hierarchy process (AHP) for selecting the best design concept of conveyor system. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019, 8 July 2019 through 8 July 2019, Melaka, Malaysia.

Kamaludin, K. N. and Abdullah, L. and Sheng, L. Y. and Maslan, M. N. and Zamri, R. and Mat Ali, M. and Syed Mohamed, M. S. and Zainon, M. and Noorazizi, M. S. (2021) Utilization of Fuzzy Analytical Hierarchy Process (FAHP) and TOPSIS-AHP for selecting the best plant maintenance strategy. In: 11th Malaysian Technical Universities Conference on Engineering and Technology,MUCET 2019, 19 - 22 November 2019, Kuantan, Malaysia.

Kamalzaman, Siti Nor Asikin and Sulaiman, Shahida and Syed-Mohamad, Sharifah Mashita (2011) User-centered technique for managing and racking modification requests in prototype-based web applications. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Kamardin, Kamilia and A. Rahim, Mohamad Kamal and Hall, Peter S. and Samsuri, Noor Asmawati and Abdul Latef, Tarik and Ullah, Mohammad Habib (2015) Planar textile antennas with artificial magnetic conductor for body centric communications. In: 6th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META15), 4-7 August, 2015, USA.

Kamardin, Kamilia and Abdul Rahim, Mohamad Kamal and Samsuri, Noor Asmawati and Jalil, Mohd Ezwan and Ahmad, Noor Azurati (2015) Planar textile antennas performance under wearable and body centric measurements. In: International Conference on Applied Electromagnetics (APPEIC), 3-5 Dis, 2015, Thailand.

Kamaruddin, Samira Albati and Che Hasan, Rozaimi and Abd. Karim, Nurul Izzati (2018) Comparison of petrophysical relationship for soil water content estimation at peat soil using gpr common-offset measurements. In: 5th International Congress on Technology - Engineering & Science (ICONTES2018).

Kamaruddin, Samira Albati and Mat Noor, Mohd. Nazrul (2018) Risk assessment of excavation works in the vicinity of underground utilities at construction site. In: Proceedings of the 2nd Master Project Symposium.

Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Gas adsoprtion phenomenon in microporous zeolite adsorbent. In: MSA Golden Jubilee International Science Congress (ISC) 2005, August 3-6, 2005, Putra World Trade Centre, Kuala Lumpur.

Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Gas adsorption on modified zeolite adsorbent. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Kamarudin, Khairul Hisyam and Abd. Wahid, Siti Nurhuda (2015) Using ICTs for rural development: an overview. In: Asean Forum on ICT for Sustainable Rural Development and Knowledge Cross-Fertilization 2015 (ASEAN-ICT4SRD2015), 25-27 May, 2015, Kuala Lumpur, Malaysia.

Kamarudin, M. H. and Ismail, Zool H. (2022) Lightweight deep CNN models for identifying drought stressed plant. In: 9th AUN/SEED-Net Regional Conference on Natural Disaster, RCND 2021, 15 December 2021 - 16 December 2021, Virtual, Online.

Kamarudin, Muhamad Aiman and Mustafa Kamal, Muhamad Syakir and Safar, Ajmain @ Jimaain (2019) Media Sosial dan Dakwah Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Kaneda, T. and Hamada, N. and Mitsukura, Y. (2016) Automatic alignment method for projection mapping on planes with depth. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Kaneda, Tomohiro and Hamada, Nozomu and Mitsukura, Yasue (2015) Automatic alignment system in simple planes for projection mapping. In: 2016 IEEE 12th International Colloquium on Signal Processing & its Applications (CSPA2016), 4 - 6 March 2016, Melaka, Malaysia.

Kaneshiro, S. and Mitsukura, Y. and Hamada, N. (2016) Respiratory sound analysis for continuous positive airway pressure machines. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Kang, D. and Hong, C. and Rehman, D. and Morini, G. L. and Asako, Y. and Faghri, M. (2020) Average friction factors of choked gas flow in microtubes. In: 37th UIT Heat Transfer Conference and Symposium Refrigerants: Heat Transfer and Applications, 24 - 26 June 2019, Padova, Italy.

Kang, Xiang Khor and Phei, Ming Chern and Che, Fai Yeong and Lee, Eileen Ming Su and Mustar, Muhammad Farhan and Abdullah, Najib and Kang, Xian Khor and Mohd. Latip, Hadafi Fitri (2018) Smart balance board to improve balance and reduce fall risk: pilot study. In: 2nd International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2017, 10 December 2017 through 13 December 2017, Penang, Malaysia.

Kapi, Azyan Yusra and Ibrahim, Subariah (2011) Fixed size encoding scheme for software watermarking. In: 7th International Conference On Information Assurance And Secuirity.

Karimiyazdi, Rahman and Mokhber, Mozhdeh (2015) Improving viral marketing campaign via mobile instant messaging (MIM) applications. In: The 1st World Virtual Conference on Social and Behavioral Sciences, 28-30 Jun, 2015, Johor Bahru, Malaysia.

Kashani, Jamal and Arabshahi, Zohreh and Abdul Kadir, Mohamed Rafiq and Azari, Abbas (2012) Manufacturing of flexible surgical guide for fully edentulous patients. In: 2012 2nd International Conference on Key Engineering Materials (ICKEM 2012), 26-28 Feb 2012, Singapore.

Kashiwagi, R. and Hong, C. and Asako, Y. and Morini, G. L. and Faghri, M. (2020) Identification of gas flow regimes in adiabatic microtubes by means of wall temperature measurements. In: 7th UIT Heat Transfer Conference and Symposium Refrigerants: Heat Transferand Applications, 24 - 26 June 2019, Padova, Italy.

Kathiravale, Sivapalan and Ripin, Adnan (1997) Palm oil mill effluent treatment towards zero discharge. In: National Science And Technology Conference, July 15-16, 1997, Kuala Lumpur. (Unpublished)

Kathiravale, Sivapalan and Ripin, Adnan (1997) Treatment of palm oil mill effluent using evaporation and adsorption techniques. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Kaur, Manpreet and Mubarak, N. M. and Chin, Bridgid Lai Fui and Mohammad Khalid, Mohammad Khalid and Karri, Rama Rao and Walvekar, Rashmi and Abdullah, E. C. and Tanjung, Faisal Amri (2020) Extraction of reinforced epoxy nanocomposite using agricultural waste biomass. In: 2nd International Conference on Materials Technology and Energy, 6 - 8 November 2019, Sarawak, Malaysia.

Kei, Saito and Michihiko, Shinozaki (2000) A study on communication tool for urban disaster prevention using multimedia. In: 8th International Conference on Computing in Civil and Building Engineering, 14 - 16 August 2000, Stanford, CA; United States.

Ken, T. L. and Ahmad, T. B. and Mohd., M. S. B. and Ngien, S. K. and Suwa, T. and Meng, O. S. (2016) Topological properties of flat electroencephalography's state space. In: 1st Progress in Applied Mathematics in Science and Engineering, PIAMSE 2015, 29 Sept - 1 Oct 2015, Bali, Indonesia.

Khairi, M. H. A. and Abdul Aziz, S. A. and Hapipi, N. M. and Mazlan, S. A. and Nordin, N. A. and Ubaidillah, Ubaidillah and Ismail, N. I. N. (2020) Enhancement of isotropic magnetorheological elastomer properties by silicone oil. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16-17 Oct 2019, Jakarta, Indonesia.

Khairi, M. H. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Ahmad, K. Z. K. and Aziz, S. A. A. and Yunus, N. A. (2016) Effect of sucrose acetate isobutyrate ester on the epoxidised natural rubber based magnetorheological elastomers. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2007) Antimicrobial effects on starch-based films incorporated with lysozymes. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Antimicrobial (AM) effects of strach-based film incorporated with lysozymes and lauric acid. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Study of an antimicrobial starch-based active packaging system. In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Study of an antimicrobial starch-based active packaging system. In: 4th Food Science and Technology Seminar 2005, 23 July 2005, USM Penang.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2005) Preliminary study of antimicrobial (AM) effects of starch-based film incorporated with nisin, lysozymes and lauric acid. In: Simposium Kimia Analisis Malaysia SKAM 18, 12-14 September 2005, Hotel Hyatt RegencyJohor Bahru, Johor.

Khalid, A. S. and Hassan, N. S. and Abu Bakar Razak, N. A. and Baharuden, A. F. (2020) Business intelligence dashboard for driver performance in fleet management. In: 11th International Conference on E-Education, E-Business, E-Management, and E-Learning, IC4E 2020, 10-12 Jan 2020, Osaka, Japan.

Khalid, Che Mohd. Lukman and Fathi, Mohamad Syazli and Mohamed, Zainai (2015) The system architecture of cyber-physical systems integration for underground utility networks visualisation. In: The 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Khalid, Nadia Aqilah and Shoparwe, Noor Fazliani and Mohammad, Rosmawani and Mohamad Nor, Maryana and Tan, Lian See and Otitoju, Tunmise Ayode (2022) Characterization of polymer inclusion membranes (PIMs) containing Bis-(2-ethylhexyl) phosphate carrier for zinc (II) ions removal. In: 2021 International Conference on Bioengineering and Technology, IConBET2021, 24 - 25 May 2022, Kelantan, Virtual.

Khan, Mohammad Ilyas and Hassan, Azman (2007) Wetting characteristics of photographic base solid polymeric substrates. In: VIIth National Symposium On Polymeric Materials 2007, November 27-28, 2007, Universiti Kuala Lumpur.

Khan, A. K. and Mubarak, N. M. and Abdullah, E. C. and Khalid, M. and Nizamuddin, S. and Baloch, H. A. and Siddiqui, M. T. H. (2019) Immobilization of lipase enzyme carbon nanotubes via adsorption. In: 11th Curtin University Technology, Science and Engineering International Conference, CUTSE 2018, 26-28 Nov 2018, Curtin University Malaysia Miri, Sarawak, Malaysia.

Kirimtat, Ayca and Krejcar, Ondrej and Dolezal, Rafael and Selamat, Ali (2020) A mini review on parallel processing of brain magnetic resonance imaging. In: 8th International Work-Conference on Bioinformatics and Biomedical Engineering, IWBBIO 2020, 6 - 8 May 2020, Granada, Spain.

Komaki, Shozo (2015) Wireless Communication and Their Mathematics. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28-30 May 2014, Penang, Malaysia.

Kon, Suh Kee and Kamarudin, Khairul Sozana Nor and Mat, Hanapi (2005) Activated carbon based adsorptive natural gas storage. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kow, Mee Yee and Lim, Teck Loon and Abu Bakar, Nooh and Yip, M. W. (2014) A case study: maturity assessment of product lifecycle management (PLM) implementation in Malaysia automotive components manufacturing company. In: International Graduate Conference on Engineering, Science & Humanities 2014 (IGCESH 2014), 19-21 August, 2014, Skudai, Johor.

Krishnan, Uwarani and Abd. Rahim, Noorlizawati and Mohamed, Zainai and Salim, Fatimah (2022) Strategic framework towards open science adoption in Malaysia. In: 2022 IEEE Technology and Engineering Management Society Conference - Asia Pacific, TEMSCON-ASPAC 2022, 19 - 22 September 2022, Bangkok, Thailand.

Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Abdul Aziz, Ramlan and Sarmidi, Mohamad Roji (2005) The use of computer-aided process design and simulation tools in undergraduate research projects. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

Kuppusamy, P. and Samy, G. N. and Maarop, N. and Magalingam, P. and Kamaruddin, N. and Shanmugam, B. and Perumal, S. (2020) Systematic literature review of information security compliance behaviour theories. In: 2nd International Conference on Recent Advancements in Science and Technology, ICoRAST 2019, 28-30 Oct 2019, Putrajaya, Malaysia.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Bifunctional catalysis of W/HZSM-5 for dehydroaromatization of methane in the absence of oxygen. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2007) Conversion of methane to gasoline range hydrocarbons over W/HZSM-5 catalyst: effect of co-feeding. In: The 2nd International Conference on Advances in Petrochemicals and Polymers ICAPP 2007, June 25-28, 2007, Bangkok, Thailand. (Unpublished)

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Dehydroaromatization of methane in the absence of oxygen over modified W/HZSM-5 catalyst. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Production of gasoline range hydrocarbons from catalytic reaction of methane in the presence of ethylene over W/HZSM-5. In: Gas-Fuel 05, November 14-15, 2005, Brugge, Belgium.

Lam, Hon Loong and Ibrahim, Kamarul Asri (2002) Improved multivariable statistical process control (MSPSC) for chemical process fault detection and diagnosis (PFDD) - Cross-variable correlation approach. In: Regional Symposium on Chemical Engineering (RSCE) in conjunction with 16th Symposium of Malaysian Chemical Engineers, 27-30 October 2002, Petaling Jaya, Malaysia. (Submitted)

Lashkari, Arash Habibi and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) A survey on image steganography algorithms and evaluation. In: The International Conference on Digital Information Processing and Communications (ICDIPC), 7-9 July 2011, VSB-Technical University of Ostrava, Ostrava, Czech.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Roles and responsibilities of construction players in projects using building information modeling (BIM). In: 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things, PLM 2015, 19-21 Oct 2015, Doha, Qatar.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Transformation of Malaysian construction industry with Building Information Modelling (BIM). In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Lau, Alvin Meng Shin and Mohd. Yusoff, Abd. Razak and Abdul Rahman, Muhammad Zulkarnain and Rasib, Abd. Wahid and Wan Kadir, Wan Hazli and Abu Sari, Mohd. Yazid and Darwin, Norhadija and Aziz, Muhammad Afiq (2015) Terrain analysis using unmanned aerial vehicle platform images. In: IEEE Workshop on Geoscience and Remote Sensing (IWGRS 2015), 16-17 Nov, 2015, Kuala Lumpur, Malaysia.

Lee, David Ik Bing and Ismail, Ahmad Fauzi (2000) Latest development of carbon hollow fiber membranes for gas separation. In: Malaysian Science & Technology Congress (MSTC) 2000, 7-9 November 2000, Genting Highlands. (Unpublished)

Lee, L. B. and Omar, J. and Simmathiri, R. and Mat, Hanapi and Idris, Ani and Emby, F. and Norbib, Normah (1997) Biodegradation of oily wastes and sludges. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Lee, Ting Hun and Mat, Hanapi (1997) The potential of citric acid production using pineapple waste. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Leong, Wah Heng and Ahmad, Arshad (1997) Model based fault detection in process plant. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Liew, Chong Wai and Md. Illias, Rosli and Hassan, Osman and Mahadi, Nor Muhammad and Najimuddin, Nazalan (2005) Genome sequence survey of local isolated alkaliphilic bacillus sp. GI. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Liew, C. L. and Talib, A. R. A. and Jacobs, R. L. (2016) Malaysian aviation technologist promotion to managerial role: an empirical overview. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Lim, Chee Siang and Abdul Manan, Zainuddin and Mustapa, Ana Najwa (2005) Separation performance of supercritical carbon dioxide extraction column for crude palm oil processing: observation using process simulator. In: Symposium Of Malaysian Chemical Engineers SOMChE 2005, 8-10 Dec 2005, Universiti Malaysia Sabah. (Submitted)

Lim, Heimrih Meng Kee and Ismail, Zool Hilmi and Ahmad, Norulhusna and Mohd. Izhar, Mohd. Azri (2022) Simulated annealing approach for optimal batching in a warehouse. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Lim, K. M. and Ghazali, N. F. (2020) Estimation of solute transport parameter and mass transfer coefficient in nanofiltration for solvent diluted palm oil. In: Energy Security and Chemical Engineering Congress 2019, ESChE 2019, 17 July - 19 July 2019, Kuala Lumpur, Malaysia.

Lim, Ki Min and Ghazali, Nazlee Faisal (2021) Nanofiltration of binary palm oil/solvent mixtures: Experimental and modeling. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Lim, Kok Cheng and Selamat, Ali and Mohamed Zabil, Mohd. Hazli and Selamat, Md. Hafiz and Alias, Rose Alinda and Mohamed, Farhan and Krejcar, Ondrej (2020) A comparative study of major clustering techniques for MAR learning usability prioritization processes. In: 19th International Conference on New Trends in Intelligent Software Methodologies, Tools and Techniques, SoMeT 2020, 22 - 24 September 2020, Virtual, Online.

Lim, Meng Hee and Leong, Mohd Salman @ Yew Mun and Kar, Hoou Hui and Ooi, Ching Sheng and Wai, Keng Ngui (2018) An improved image processing approach for machinery fault diagnosis. In: Proceedings of Montreal 2018 Global Power and Propulsion Forum, 7 May 2018 through 9 May 2018, Montreal.

Lim, Meng Hee and Leong, Mohd. Salman @ Yew Mun and Hui, Kar Hoou and Ooi, Ching Sheng (2018) Diagnosis of reduction gear failures of a power generation gas turbine due to excessive pipe strain. In: Proceedings of Montreal 2018 Global Power and Propulsion Forum, 7 May 2018 through 9 May 2018, Montreal.

Lim, Teck Loon and Kow, Mee Yee and Abu Bakar, Nooh and Yip, M. W. (2014) Case studies in implementing dynamic production planning and scheduling system in make-to-order high-mix-low-volume small and medium-scaled industries for production efficiency. In: International Graduate Conference on Engineering, Science and Humanities (IGCESH2014)International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), 19-21 August, 2014, Johor Bahru, Malaysia.

Lim, W. Y. and Abu Bakar, N. A. and Hassan, N. H. and Mohd. Zainuddin, N. M. and Mohd. Yusoff, R. C. and Ab. Rahim, N. Z. (2021) Using machine learning to forecast residential property prices in overcoming the property overhang issue. In: 3rd IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2021, 13 September 2021 - 15 September 2021, Kota Kinabalu, Sabah.

Lim, W. Y. and Abu Bakar, N. A. and Hassan, N. H. and Zainuddin, N. M. M. and Yusoff, R. C. M. and Ab. Rahim, N. Z. (2021) Unmanned aerial vehicle (UAV) gps jamming test by using software defined radio (SDR) platform. In: 3rd IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2021, 13 September 2021 - 15 September 2021, Kota Kinabalu, Sabah.

Lo, Po Kim and Md. Illias, Rosli and Hassan, Osman and Mahadi, Nor Muhammad and Ahmad, Arshad (2005) Secretory overexpression of CGTase gene from bacillus sp. G1 in escherichia coli. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Loh, Melissa Pei Shian and Syamsul Baharil, Nur Aishah and Ting, Lee Yu and M., Taher and Abdul Majid, Fadzilah Adibah (2005) Pilot scale extraction of proteolytic enzyme bromelain from pineapple (ananas comosus). In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Lokman, Muhammad Quisar and Ahmad, Fauzan and Harun, Sulaiman Wadi and Abd. Wahid, M. H. (2017) Q-switched erbium doped fiber laser using antimony telluride-polyvinyl alcohol (Sb2Te3-PVA) as saturable absorber. In: International Conference on Applied Photonics and Electronics 2017 (InCAPE2017), 9 - 10 Aug 2017, Avillion Port Dickson, Negeri Sembilan, Malaysia.

Looi, Yat Seong and Abd. Latif, Fazilah and Norbib, Normah and Mohd. Said, Nazlan (1997) Antithrombin protein from hirudinaria manillensis: Preliminary studies on isolation, sequencing of the antithrombin protein and cloning of the desired gene. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Lukman, H. and Munawwarah, S. and Azizan, A. and Yakub, F. and Zaki, S. A. and Rasid, Z. A. (2021) Enhancing the stabilization of aircraft pitch motion control via intelligent and classical method. In: IOP Conference Series: Materials Science and Engineering, 12 December 2017, Putrajaya, Malaysia.

M. A., Fathihah and M. P., Khairunnisa (2021) Characteristics and carbon dioxide adsorption performance of candle soot-activated by potassium hydroxide. In: 1st International Conference on Biomass Utilization and Sustainable Energy 2020, ICoBiomasSE 2020, 15 - 16 December 2020, Virtual, Online.

M. Ariff, M. Farid and Setan, Halim and Majid, Zulkepli and Albert, K. Chong (2008) A stereophotogrammetric technique for forensic measurement of surveillance images. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

M. Idris, Khairulnizam and Setan, Halim (2008) Precise Dimensional Measurement of A Helicopter model using Geodetic and Non-Contact Measurement Techniques. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

M. Ongkudon, Clarence and Abdul Rahman, Badarulhisam and Abdul Aziz, Azila (2005) Screening of the Sf900-II SFM insect cell culture medium and recombinant baculovirus for the expression of recombinant human transferrin. In: 15th MSMBB Annual Scientific Meeting, 4-5 April 2005, Kuala Lumpur.

M. Sanip, Suhaila and Ismail, Ahmad Fauzi and Buang, Nor Aziah and A. Majid, Zaiton and Saidin, Mohd. Abdul Razis (2005) Hydrogen sorption capacity of as-grown multiwalled nanotubes (MWNTs). In: The XXII Regional Conference on Solid State Science & Technology (RCSST' 05), 18-21 Dec 2005, Kuantan, Pahang.

M. Shahrulnizam, M. R. and Adzim, S. K. and Kamaruddin, Samira Albati (2020) Flood mitigation measures in urban areas of Malaysia using the integrated catchment modelling approach. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 November 2019 - 26 November 2019, Putrajaya, Malaysia.

M. Yunus, M. Y. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2003) Development of rule-based advisory system from modified hazard and operability study on fatty acid fractionation column. In: International Conference on Chemical and Bioprocess Engineering ICCBPE 2003 , 27-29 August 2003, Kota Kinabalu. (Submitted)

Maarop, Nurazean and Mohd. Zam, Mohd. Farid and Samy, Ganthan Narayana and Abdul Manaf, Azizah and Munshi, Asmaa and Magalingam, Pritheega (2021) A qualitative insight of success factors of information security management system. In: 7th International Conference on Research and Innovation in Information Systems, ICRIIS 2021, 25 - 26 October 2021, Johor Bahru, Malaysia.

Mahadi, Mardhati and Bani, Nurul Aini and Nazmi, Nurhazimah and Usman, Sahnius and Syed Abd. Rahman, Sharifah Alwiah and Mohd. Noor, Norliza (2022) Effect of body postures on gripping force classification using a multimodal system of electromyography and handgrip strength measurement. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Mahamad Razi, Nur Fadzlina and Abd. Rahim, Noorlizawati and Mohamed, Zainai and Salim, Fatimah (2022) Entrepreneurial leadership and social innovation performance: A comparison of projects under Malaysia Innovation Foundation’s purview. In: 2022 IEEE Technology and Engineering Management Society Conference - Asia Pacific, TEMSCON-ASPAC 2022, 19 - 22 September 2022, Bangkok, Thailand.

Mahmood, Muhammad Syarafi and Khairuddin, Uswah and Mohd. Khairuddin, Anis Salwa (2021) Vehicles trajectories analysis using piecewise-segment dynamic time warping (PSDTW). In: 2nd International Conference on Innovative Technology, Engineering and Sciences, iCITES 2020, 22 - 22 December 2020, Pekan, Pahang.

Mahmud, Mohd. Razali and Gunathilaka, M. D. E. K. (2008) Inadequate sound velocity profile measurement’s artifacts in multibeam echosounder system data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahmud, Mohd. Razali and Juwit, Mohamad Kelana (2008) Classification of seafloor habitats using acoustic backscattering of multibeam echosounder systems. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahmud, Mohd. Razali and Zainal, Norfariza (2008) Development of web-based GIS for marine data information. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahrin, Mohd. Naz'ri and Che Mohd. Yusoff, Rasimah and Sulaiman, Nur Liyana (2015) Investigating factors contributing to the awareness of agile practices. In: The 7th International Conference on Internet (ICONI 2015), 13-16 Dec, 2015, Kuala Lumpur, Malaysia.

Majid, Zulkepli and Setan, Halim and Chong, Albert and Mohd. Said, Shaharuddin (2007) Three-dimensional modeling of tradisional Malaysian wooden engraving arts using close-range laser scanning technology. In: The 28th Asian Conference on Remote Sensing (ACRS) 2007, 2007, PWTC, Kuala Lumpur.

Mak, Weng Yee and Ibrahim, Kamarul Asri (2003) Fault detection for distillation column using multivariate stastistical process control (MSPC). In: Symposium of Malaysian Chemical Engineers (SOMChE) 2003, 29-30 December 2003, Penang, Malaysia. (Submitted)

Makarim, D. A. and Tjahjana, D. D. D. P. and Cahyono, S. I. and Mazlan, S. A. (2019) Performance investigation of the crossflow water turbine by using CFD. In: 4th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2018, 9-11 Okt 2018, Alana Hotel and Convention Center Surakarta, Indonesia.

Malik, A. and Razak, A. A. and Nawi, M. R. M. and Saharuddin, R. and Zaki, S. A. (2016) Analysis of ventilation system on respiratory symptoms at child care centers. In: 8th Asian Conference on Refrigeration and Air-Conditioning, ACRA 2016, 15-17 May 2016, Taipei, Taiwan.

Mamat, N. and Yakub, F. and Salim, S. A. Z. S. and Ali, M. S. M. and Putra, S. M. S. M. (2019) Analysis of implementation control device in hybrid mass damper system. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems, I2 CACIS 2018, 20 October 2018, Grand Blue Wave Hotel Shah Alam, Malaysia.

Mamat, Rizalman and Mohd. Ja'afar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2001) Pengaruh kaedah penyediaan fabrikasi/propelan ke atas kadar pembakaran. In: Proceding of National Seminar on Advance Material Development in Malaysia, 2001.

Mambou, S. and Krejcar, O. and Selamat, A. (2019) Approximate outputs of accelerated turing machines closest to their halting point. In: 11th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2019, 8-11 Apr 2019, Yogyakarta, Indonesia.

Mamoon, I. A. and Islam, A. K. M. M. and Baharun, S. and Ahmed, A. and Komaki, S. (2016) Cluster based architecture and network maintenance protocol for medical priority aware cognitive radio based hospital. In: 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016, 16 August 2016 through 20 August 2016, United States.

Manan, Muhammad Abdul and Mat, Hanapi and L., J. Ming (1997) Rheological properties of crude oil emulsion. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mangruwa, Rajiv Dharma and Shaikh Salim, Sheikh Ahmad Zaki and Mohd. Mahdzir, Akbariah and Khalid, Waqas (2015) A review of cross-cultural analysis on energy behaviour consumption in residential building between Malaysia and Japan. In: Malaysia-Japan Joint International Conference 2015 (MJJIC 2015), 13-15 Nov, 2015, Japan.

Manshor, H. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Manshor, H. and Wan Sabri, W. M. I. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of titania and magnesia on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Mansoor, N. and Baharun, S. and Islam, A. K. M. M. and Komaki, S. and Zareei, M. (2015) Cluster modelling for cognitive radio ad-hoc networks using graph theory. In: International Conference on Electrical, Automation and Mechanical Engineering (EAME 2015), May 2015, Xiamen, China.

Mansoor, N. and Islam, A. K. M. M. and Zareei, M. and Baharun, S. and Komaki, S. (2015) A stable cluster-based architecture for cognitive radio ad-hoc networks. In: 2014 IEEE Region 10 Conference, TENCON 2014, 22-25 Oct 2014, Bangkok, Thailand.

Marghany, Maged (2009) 3D coastal bathymetry reconstruction using topsar data. In: IEEE International Geoscience & Remote Sensing Symposium (IGARSS 2009), 2009, Cape Town, South Africa.

Marghany, Maged and Hashim, Mazlan (2007) Fuzzy algorithm for 3D coastal geomorphology mapping by DInSAR. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium on GPS/GNS 2007, 2007, Johor Bahru.

Marghany, Maged and Hashim, Mazlan (2008) Utilization of fuzzy b-pline for three-dimensional tsunami wave reconstruction from quickbird satellite data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Marto, Aminaton and Othman, Bakhtiar Affandy (2018) Effects of sand sizes on engineering properties of tropical sand matrix soil. In: 2nd Geomeast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 ,The Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE), 24 November 2018 through 28 November 2018, Cairo.

Marto, Aminaton and Othman, Bakhtiar Affandy (2018) Liquefaction resistance of sand-fine mixtures: a review with current research on factors influencing liquefaction resistance. In: 5th Malaysia-Japan Joint International Conference (MJJIC 2018).

Mashhuri, Ahmad Mujib and Ahmad, Anuar (2008) Development of camera calibration software using bundle adjustment method. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mashudi, N. A. and Rossli, S. A. and Ahmad, N. and Mohd. Noor, N. (2021) Comparison on some machine learning techniques in breast cancer classification. In: 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020, 1 - 3 March 2021, Virtual, Langkawi Island.

Maskuriy, R. and Selamat, A. and Ali, K. N. and Maresova, P. and Krejcar, O. and Kuca, K. and Mohd., S. (2020) Man-made disaster prevention using waste management hierarchy and disaster management cycle. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Maskuriy, Raihan and Selamat, Ali and Ali, Kherun Nita and Mahdzir, Akbariah and Maresova, Petra and Krejcar, Ondrej (2021) University spin-off: effective solution on technology transfer in AEC industry for intelligent city transformation. In: 19th International Scientific Conference on Hradec Economic Days, 25 March 2021 - 26 March 2021, Hradec Kralove, Czech Republic.

Maslan, Mohd. Nazmin and Syed Mohamed, Mohd. Syafiq and Zamri, Ruzaidi and Abdullah, Lokman and Mat Ali, Mahasan and Ab. Rashid, Mohd. Zamzuri and Noorazizi, Mohd, Samsuddin (2020) Identification of a piezoelectric compact actuator. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, Sympo SIMM 2019, 8 July 2019 through 8 July 2019, Melaka, Malaysia.

Masrom, Maslin and Ismail, Zuraini (2008) Evaluation of computer ethics: confirmatory factor models using PROC CALIS. In: SAS Forum 2008 Malaysia, 15 & 16 July 2008, KL Convention Centre, Malaysia.

Mat, Ramli and Tavare, N. S. (1997) Synthesis of zeolite A in batch and semi-batch reactors. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mat Dahan, Suziyana and Mohd. Yusof, Sha'ri and Taib, Mohd. Yusof (2017) Performance measure of eco-process innovation: Insights from a literature review. In: 2017 UTP-UMP Symposium on Energy Systems, SES 2017, 26 - 27 September 2017, Perak.

Mat Noor, Fazimah and Jamaludin, Khairur Rijal and Ahmad, Sufizar (2017) Physical and mechanical characteristics of porous SS316L for biomedical implant. In: 29th Regional Conference of Solid State Science and Technology, RCSSST 2016, 15 - 17 November 2016, Johor Bahru, Johor.

Mat Safri, Norlaili and Tanaka, Masaomi and Murayama, Nobuki and Igasaki, Tomohiko (2003) Effects of visual feedback on coherence between human brain and muscle. In: IEEE EMBS Asian-Pacific Conference on Biomedical Engineering , 20-22 Oct. 2003, Kyoto, Japan.

Mat Soom, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Mohd. Nor, M. N. K. and Ayob, M. S. and Najafian, G. (2015) Global ultimate strength assessment (GUSA) for lifetime extension of ageing offshore structures. In: Proceedings of the Twenty-fifth (2015) International Ocean and Polar Engineering Conference, 21-26 June 2015, Kona, Big Island, Hawaii, USA.

Mat Sooma, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Azman, N. U. and Najafian, G. (2016) Reliability-based design and assessment for lifetime extension of ageing offshore structures. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mat Yahya, Siti Hafiza and Ismail, Syuhaida (2014) Performance appraisal amongst contractors in construction project in Malaysia. In: Third International Conference on Engineering Business Management (ICEBM 2014), 25-26 August, 2014, Kuala Lumpur, Malaysia.

Mat Zaini, Y. M. and Yuzir, A. (2020) Effects of pharmaceutical load on the effluent quality using sequencing batch reactor. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Mazlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Ahmad, M. A. (2016) The effect of tap water emulsified fuel on exhaust emission of single cylinder compression ignition engine. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Md. Anwar, Rina and Abdul Rahim, Fiza and Victor, Puven Alvin (2022) A review on bystanders terminologies in cyberbullying. In: 3rd International Conference of Information and Communication Technology 2021, ICICTM 2021, 23 March 2021, Kuala Lumpur, Virtual.

Md. Anwar, Rina and Victor, Puven Alvin and Abdul Rahim, Fiza and Md. Din, Marina and Abu Bakar, Asmidar and Abdul Latif, Aliza (2021) Identifying the presence of cyberbullying in Tamil-English phonetic words using browser plugin. In: 7th International Conference on Advances in Visual Informatics, IVIC 2021, 23 - 25 November 2021, Kajang, Malaysia.

Md. Noor, Norhazilan and Smith, George H. and Yahaya, Nordin (2007) The weibull time-dependent growth model of marine corrosion in seawater ballast tank. In: Prosiding Kebangsaan Awam'07, 29th - 31st May 2007, Langkawi, Malaysia.

Md. Nor, Norzaliza and Sheikh Hussain, Siti Hadrina and Ismail, Kamarulafizam and A. Harris, Arief Ruhullah and Wan Abdul Aziz, Wan Siti Nur Aminah and Shaikh Salleh, Sheikh Hussain and Samdin, Siti Balqis and Mohd. Noor, Alias (2015) A development of education technology for smart learning program. In: 9th International Technology, Education and Development Conference, 2-4 March, 2015, Spain.

Md. Sarip, Mohd. Sharizan and Morad, Noor Azian and Yamashita, Yoshiyuki and Ahmad Razali, Muhamad Nur Iman (2015) Design and modeling of hot compressed water extraction process for palm oil. In: 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015, 31 May-3 Julai, 2015, Kota Kinabalu, Malaysia.

Md. Sarkan, Haslina (2011) Epidemiologic approach in computer viruses : research survey. In: 15th International Symposium On Health Information Management Research (ISHIMR 2011).

Md. Yassin, Abu Azam and Kamis, Azmi and Abdullah, Mohammad Omar (1991) Palm oil diesel as a base fluid in formulating oil based drilling fluid. In: Kertas Kerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), UTM Johor Bahru.

Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Soad, Muhammad Hafiz (2015) Aetiological classification of tremor. In: ICRIL International Conference of Innovation in Science and Technology, 20 Apr, 2015, Kuala Lumpur, Malaysia.

Md. Zaki, Nurul Asyikin and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of microwave treatment on moisture content and vitamin C retention of papaya. In: First International Symposium on Papaya, 22-24 November 2005, Genting Highlands, Malaysia.

Md. Zaki, Nurul Asyikin and Mohd. Darwi, Lizawati and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of drying parameters and geometry on papaya quality. In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Md. Zubir, Ainaa Amirah and M. P., Khairunnisa and Surib, Nur Atiqah and J., Nor Ruwaida and Md. Ali, Abd. Halim and Rashid, M. (2020) Electrospinning of PLA with DMF: Effect of polymer concentration on the bead diameter of the electrospun fibre. In: 26th Regional Symposium on Chemical Engineering, RSCE 2019, 30 - 1 November 2019, Kuala Lumpur, Malaysia.

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2007) Study of scale formation in oil reservoir during water injection-A review. In: Marine Science & Technology Seminar 2007, 22nd-23rd Februrary 2007, Istana Hotel, Kuala Lumpur.

Mhamed Alshref, Halema H. and Abas, Hafiza and Abu Bakar, Nur Azaliah (2021) The adoption of ICT in Libyan Higher Education Institutions (LHEIs): Theoretical models and challenges. In: 6th International Scientific Conference for Iraqi Al Khwarizmi Society, FISCAS 2021, 22 - 23 November 2020, Cairo, Egypt.

Mikami, O. and Fujikawa, C. (2016) 3-Beam laser Doppler velocimeter for 3-D velocity measurement. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Kuching, Sarawak; Malaysia.

Mikami, O. and Fujikawa, C. (2016) Laser diode Doppler velocimeter with 3-beams and self-mixing effect enabling 3-dimensional velocity measurement. In: Optical Sensing and Detection IV, 3-7 April 2016, Brussels, Belgium.

Mikami, Osamu and Yaacob, Yuzafirah and Baharudin, Nurul Atiqah and Ambran, Sumiaty and Fujikawa, Chiemi (2017) Optical pin interface for 90-deg optical path conversion coupling to Printed Wiring Board. In: 2016 IEEE Region 10 Conference, TENCON 2016, 22 - 25 November 2016, Singapore.

Ming, J. T. C. and Noor, N. M. and Rue, N. C. and Rijal, O. M. and Kassim, R. M. and Yunus, A. (2016) Performance evaluation system for automated lung segmentation system using HRCT thorax images. In: IEEE Student Symposium in Biomedical Engineering and Sciences, ISSBES 2015, 4 Nov 2015, Selangor, Malaysia.

Minoru, Yamada and Ambran, Sumiaty and Kazuki, Makinoahima and Alexander William, Setiawan Putra (2015) An improved model for noise analysis in semiconductor optical amplifier. In: Malaysia-Japan Joint International Conference 2015, 13-15 Nov, 2015, Japan.

Miskon, Shahrul Affendi and Hairudin, Norhazah and Safar, Jimaain @Ajmain (2018) Sains Teknologi Islam dalam Pembelajaran. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Moghaddam, F. F. and Majd, A. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A dynamic classification index to enhance data protection procedures in cloud-based environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Moghaddam, F. F. and Vala, M. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A reliable data protection model based on re-encryption concepts in cloud environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Mohamad, N. and Mazlan, S. A. and Ubaidillah, Ubaidillah (2016) Effect of carbonyl iron particles composition on the physical characteristics of MR grease. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Mohamad, N. and Ooi, C. Y. and Ismail, N. and Teh, J. (2016) SVA checker generator for FPGA-based verification platform. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Canada.

Mohamad, N. A. and Zubair, N. A. and Lotf, E. A. and Nasef, M. M. and Ahmad, A. and Ali, R. R. and Abdullah, T. A. T. and Ting, T. M. (2020) Effect of monoethanolamine concentration on CO2 capture by poly (chloromethyl styrene) grafted fibrous adsorbent. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Mohamad, Noor Ashikin and Nasef, Mohamed Mahmoud (2022) Effect of amine head group imparted to poly (glycidyl methacrylate) grafted fibrous adsorbent for CO2adsorption. In: 9th Conference on Emerging Energy & Process Technology 2021 (CONCEPT 2021), 24 November 2021 - 25 November 2021, Johor Bahru, Johor.

Mohamad Fuzi, Siti Fatimah Zaharah and Md. Illias, Rosli (2007) Cloning of xylanase gene from Trichoderma reesei ATCC 58350. In: The 32nd Annual Conference Of The Malaysian Society For Biochemistry And Molecular Biology, 5th-6th September 2007, Eastin Hotel, Petaling Jaya.

Mohamad Rashid, N. N. and Ahmad Junaidi, N. H. and Rahmah Aid, S. (2019) Interface damage of protective layer in TEM lamella preparation for highly doped ge substrate. In: 2018 4th International Conference on Smart Material Research, ICSMR 2018, 16-18 Nov 2018, Sydney, Australia.

Mohamad Rashid, Nur Nadhirah and Abdul Aziz, Umar and Aid, Siti Rahmah and Centeno, Anthony and Matsumoto, Satoru and Xie, Fang and Suwa, Akira and Ikenoue, Hiroshi (2017) Comparison of theoretical and experimental analysis of P and Sn co-implantation in germanium. In: 2016 IEEE Industrial Electronics and Applications Conference, IEACon 2016, 20 - 22 November 2016, Kota Kinabalu, Sabah.

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob and Ismail, Wan Ruslan (2008) Data modelling for GIS based saturation excess overland flow. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13 - 15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mohamad Zulkifli, Siti Nur Awanis and Abdul Rahman, Alias (2008) Modelling and managing 3D spatial objects. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13 - 15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mohamand Noor, Nurul Fathia and Ahmad, Norulhusna and Mohd. Noor, Norliza (2021) Fetal health classification using supervised learning approach. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 - 10 November 2021, Virtual, Online.

Mohamand Noor, Nurul Fathia and Sipail, Herold Sylvestro and Ahmad, Norulhusna and Mohd. Noor, Norliza (2021) Covid-19 severity classification using supervised learning approach. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 - 10 November 2021, Virtual, Online.

Mohamed, Maketab (2003) Measurements of sediment oxygen demand (SOD)"in-situ" measuring chamber and its application for the stream water quality modeling and aquaculture management. In: Simposium Kimia Analisis Kebangsaan Ke-16 (SKAM-16), 9-11 Sept 2003, Holiday Inn Resort, Damai Lagoon. Kuching. (Submitted)

Mohamed, Maketab and Yusop, Zulkifli (2001) Design of sediment oxygen demand (SOD) 'in-situ' measuring chamber and its application in several rivers. In: National Seminar on Environmental Management 2001 Current Development and Future Planning, 14-15 August 2001 , Universiti Kebangsaan Malaysia, Bangi, Selangor. (Submitted)

Mohamed, N. and Sam, S. M. and Ngajikin, N. H. (2016) Power fading effects in millimeter-wave radio over fiber (RoF) link. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Mohamed, Zaharuddin and A, Saeed (2007) Modelling of a two link flexible manipulator. In: Australasian univ. power engineering conference, Perth, Australia.

Mohamed Aris, N. A. and Fathi, M. S. and Harun, A. N. and Mohamed, Z. (2020) High potential of affordable housing supply by using industrialised building system in Selangor. In: 2nd International Conference on Civil and Environmental Engineering, CENVIRON 2019, 20 November 2019 - 21 November 2019, Langkawi, Kedah, Malaysia.

Mohamed Aris, Nur Arzwin and Fathi, Mohamad Syazli and Harun, Aizul Nahar and Mohamed, Zainai (2020) Spatial pattern of affordability and overhang in Selangor. In: 10th IGRSM International Conference and Exhibition on Geospatial and Remote, IGRSM 2020, 20 - 21 October 2020, Kuala Lumpur, Virtual.

Mohamed Elhawary, Hossamelden and Suddamalla, Upendra and Shapiai, Mohd. Ibrahim and Wong, Anthony and Zamzuri, Hairi (2022) Real-time attribute based deep learning network for traffic sign detection. In: 14th International Conference on Information Technology and Electrical Engineering, ICITEE 2022, 18 - 19 October 2022, Yogyakarta, Indonesia.

Mohamed Isa, E. D. and Che Jusoh, N. W. and Hazan, R. and Shameli, K. (2020) Pullulan mediated zinc oxide microparticles: Effect of synthesis temperature. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Mohamed Isa, E. D. and Shameli, K. and Che Jusoh, N. W. and Mohamad Sukri, S. N. A. and Ismail, N. A. (2021) Variation of green synthesis techniques in fabrication of zinc oxide nanoparticles – A mini review. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Mohamed Nasir, Mohamed Nuruddin and Buang, Nor Aziah and Ismail, Ahmad Fauzi (2005) CCVD synthesis of carbon nanotubes (CNTs) using MgO and CaCO3 supports. In: The XXII Regional Conference on Solid State Science & Technology (RCSST' 05), 18-21 Dec 2005, Kuantan, Pahang.

Mohamed Saeed, Somia Alfatih and Leong, Mohd. Salman @ Yew Mun and Lim, Meng Hee (2015) Definition of engineering asset management: a review. In: Applied Mechanics and Materials, 1-4 Dec, 2015, Batu Pahat, Johor.

Mohamed Tap, Fatahiya and Ahmad Khairudin, Nurul Bahiyah and Mustafa, Iswaibah (2021) Structure base virtual screening for identifying inflammatory inhibitors. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Mohamed, Maketab (2001) QUAL2E water quality model calibration and validation methods for Sungai Selangor. In: National Workshop on Ecological and Environment Modeling (ECOMOD 2001), September 3-4, 2001, Universiti Sains Malaysia. (Submitted)

Mohammad, Abu Bakar (2011) Performance analysis of DCO OFDM and DCO WOFDM systems in MMF optical links. In: Proceedings of 2011 IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, 23-26 Aug. 2011, Victoria, BC, Canada.

Mohammad, M. and Muhamad Said, M. F. and Khairuddin, M. H. and A. Kadir, M. K. and Dahlan, M. A. A. and Zaw, T. (2020) Complex geometry automotive muffler sound transmission loss measurement by experimental method and 1D simulation correlation. In: Sustainable and Integrated Engineering International Conference 2019 (SIE 2019), 8 - 9 December 2019, Putrajaya, Malaysia.

Mohammed Ahmed, Salma Badawi and Hussain, Syed Aamer and Abdul Latiff, Liza and Ahmad, Norulhusna and Mohd. Sam, Suriani (2021) Performance evaluation of FANET routing protocols in disaster scenarios. In: Proceedings of the 2021 IEEE Symposium on Future Telecommunication Technologies, SOFTT 2021, 6 December 2021 - 7 December 2021, Bandung, Indonesia.

Mohammed Shuaib, Mohammed Shuaib and Alam, Shadab and Mohd. Daud, Salwani (2021) Improving the authenticity of real estate land transaction data using blockchain-based security scheme. In: 2nd International Conference on Advances in Cyber Security, ACeS 2020, 8 - 9 December 2020, Penang, Malaysia.

Mohammed Shuaib, Mohammed Shuaib and Hassan, Noor Hafizah and Usman, Sahnius and Alam, Shadab and Abu Bakar, Nur Azaliah and Maarop, Nurazean (2022) Performance evaluation of DLT systems based on Hyper ledger Fabric. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Mohammed Shuaib, Mohammed Shuaib and Hassan, Noor Hafizah and Usman, Sahnius and Alam, Shadab and Mohd. Sam, Suriani and Samy, Ganthan Narayana (2022) Effect of quantum computing on blockchain-based electronic health record systems. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Mohd Azmi, Mohamad Rafiuddin and Kamalanathan, Sasikumar and Safar,, Ajmain @ Jimaain (2019) Media Sosial dan Generasi Muda Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Mohd Zaki, Mohd Zulkifli and Ibrahim, Noraini and Deris, Safaai and Abd. Halim, Shahliza (2011) Mapping Architectural Concepts to SysML Profile for Product Line Architecture Modeling. In: ICSEA 2011 : The Sixth International Conference On Sofware Engineering Advances.

Mohd., Mohd. Safie and Alias, Buang and Daud, Dzurllkanian (2006) GIS analysis for flood hazard mapping: Case study Segamat, Johor, West Malaysia. In: Seminar Nasional GIS 2006: Geographic Information System Application for Mitigation in Natural Disaster, 29 November 2006 , Universiti Indonesia, Jakarta . (Unpublished)

Mohd., Norhazren Izatie and Tajul Ariffin, Hamizah Liyana and Nordin, Muhammad Yusuf and Mohamad Ramly, Zuhaili and Mat Dzahir, Mohd. Azwarie and Omar, Siti Rahmah and Asmawii, Mohammad Fahrulradzi (2020) Mini-review on technology in safety training delivery. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Mohd., S. and Syazli Fathi, M. and Nahar Harun, A. (2019) Information management for humanitarian aid distribution system in Malaysia. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Adya Hotel Malawi, Langkawi, Kedah, Malaysia.

Mohd. Ali, Nor Raihana and Ibrahim, Muhammad Asyraf (2018) Factors affecting the decision in providing training and development in small medium sized engineering companies. In: 2nd Master Project Symposium.

Mohd. Amir, Siti Nur Khairunisa and Mad Nordin, Mariam Firdhaus and Shameli, Kamyar and Mohamad Abdul Wahab, Izzati and Abdul Hamid, Mariani (2020) Modeling and optimization of pilot-scale subcritical water extraction on Zingiber zerumbet by central composite design. In: 26th Regional Symposium on Chemical Engineering, RSCE 2019, 30 - 1 November 2019, Kuala Lumpur, Malaysia.

Mohd. Baharin, Rasyidah Hanan and Yamada, Yoshihide and Kamardin, Kamilia and Nguyen, Quoc Dinh and Michishita, Naobumi (2018) Input resistances of small normal-mode helical antennas in dielectric materials. In: 2017 IEEE Asia Pacific Microwave Conference, APMC 2017, 13 November 2017 through 16 November 2017, Renaissance Kuala Lumpur Hotel Kuala Lumpur, Malaysia.

Mohd. Halim, Siti Nabilah and Jasni, Nur Afiqah Husna and Mohamad Taib, Mohamad Fariz and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2021) Liquid-phase exfoliated graphene-MoS2 based saturable absorber for Q-switched erbium doped fiber laser. In: 4th Photonics Meeting 2021, PM 2021, 15 - 16 September 2021, Terengganu, Virtual.

Mohd. Hamami, Mohd. Ghazali and Ismail, Zool H. (2022) Dragonfly algorithm for multi-target search problem in swarm robotic with dynamic environment size. In: 35th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2022, 19 - 22 July 2022, Kitakyushu, Japan.

Mohd. Hashim, Siti Zaiton and Mardiyono, Mardiyono and Anuar, Nurulhaini and Wan Kadir, Wan Mohd. Nasir (2008) Comparative analysis on adaptive features for RFID middleware. In: Proceedings of the International Conference on Computer and Communication Engineering 2008, 13-15 May 2008, Kuala Lumpur, Malaysia.

Mohd. Isa, Mohd. Fuad and Ab. Rahim, Nor Zairah and Fathi, Mohamad Syazli and Mohd. Yusoff, Rasimah Che (2022) Extending the occupational Safety and Health Management System as a Knowledge Management System through the mixed-reality remote audit. In: 16th International Conference on Knowledge Management in Organisations, KMO 2022, 11 - 14 July 2022, Hagen, Germany.

Mohd. Ismail, Mohd. Ismifaizul and Dziyauddin, Rudzidatul Akmam and Ahmad, Robiah and Abdul Hamid, Afifah Maheran and Anwar, Shazlan (2021) Taguchi optimisation of piezoelectric design for hybrid energy harvesting of GPS tracker device. In: 7th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, 23 - 25 August 2021, Virtual, Bandung.

Mohd. Jamari, S. K. and Ubaidillah, U. and Abdul Aziz, Siti Aishah and Nordin, Nur Azmah and Fajrin, A. and Mazlan, Saiful Amri (2020) Mini review on effect of coatings on the performance of magnetorheological materials. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Mohd. Johari, Nory Afzan and Haron, Habibollah and Mohamad Jaya, Abdul Syukor (2007) Robotic modeling and simulation of palletizer robot using Workspace5. In: Computer Graphics, Imaging and Visualisation: New Advances, CGIV 2007 .

Mohd. Kamal, N. A. and Razak, K. A. and Rambat, S. (2019) Land use/land cover assessment in a seismically active region in Kundasang, Sabah. In: 6th International Conference on Geomatics and Geospatial Technology, GGT 2019, 1-3 Oct 2019, Kuala Lumpur, Malaysia.

Mohd. Noor, Alias and Che Puteh, Rosnizam and Rajoo, Srithar and Basheer, Uday M. and Md. Sah, Muhammad Hanafi and Shaikh Salleh, Sheikh Hussain (2015) Simulation study on electric turbo-compound (ETC) for thermal energy recovery in turbocharged internal combustion engine. In: Applied Mechanics and Materials, 2015.

Mohd. Noor, Siti Nur Aishah and Mohd. Tobi, Siti Uzairiah and Fathi, Mohamad Syazli (2022) Content validity index: competencies of quantity surveyors and enabling technologies in Industry 4.0. In: 3rd International Conference on Green Environmental Engineering and Technology, IConGEET 2021, 8 September 2021 - 9 September 2021, Virtual, Online.

Mohd. Noor, Siti Nur Aishah and Mohd. Tobi, Siti Uzairiah and Radin Salim, Kamilah (2020) Competencies of quantity surveyors in construction industry: Document reviews from different quantity surveyor professional bodies. In: 2nd Joint Conference on Green Engineering Technology and Applied Computing 2020, IConGETech 2020 and International Conference on Applied Computing 2020, ICAC 2020, 4 - 5 February 2020, Bangkok, Thailand.

Mohd. Rasidek, Noor Azwani and Mad Nordin, Mariam Firdhaus and Tokuyama, Hideaki and Nagatsu, Yuichiro and Mili, Norlisa and Zaini, Ahmad Syahmi and Idham, Zuhaili and Che Yunus, Mohd. Azizi (2021) Subcritical water-based pectin from banana peels (Musa Paradisiaca Cv.Tanduk) as a natural gelation agent. In: 3rd International Conference on Separation Technology, ICoST 2020, 15 - 16 August 2020, Johor, Malaysia.

Mohd. Robi, Siti Nur Aisyah and Mohd. Izhar, Mohd. Azri and Sahrim, Mus’Ab and Ahmad, Norulhusna (2022) Image detection and classification of oil palm fruit bunches. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and Adeyemi, Ademola James (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronics workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Sahri, Dzulkarnain and Zaini, Nabilah and Nasri, Noor Shawal and Mohd. Zain, Husna and Mohamed Rashid, Norhana and Noor Shawal, Anis Shahirah (2020) Carbon dioxide adsorption equilibrium rates comparative temperature study using palm kernel shell sorbent. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, 25 - 26 November 2019, Kuala Lumpur, Malaysia.

Mohd. Sakri, Fadhilah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Muhamad, Sallehuddin (2015) Numerical simulation of liquids draining from a tank using openFOAM. In: The International Conference on Computational Fluid Dynamics in Research and Industry 2015, 17-19 August, 2015, Kuala Lumpur, Malaysia.

Mohd. Sanip, Suhaila and Saidin, Mohd. Abdul Razis and Ismail, Ahmad Fauzi (2007) Hydrogen adsorption on activated carbon and carbon nanotubes using volumetric differential pressure technique. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May-1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Mohd. Sanip, Suhaila and Tee, Jia Chee and Saidin, Mohd. Abdul Razis and Aziz, Madzlan and Ismail, Ahmad Fauzi (2007) Hydrogen adsorption capacity of multiwalled carbon nanotubes grown over different catalyst supports. In: The 23rd Regional Conference On Solid State Science and Technology 2007, 27-29 November 2007, Hyatt Regency Hotel, Johor Bahru, Malaysia.

Mohd. Sharif, N. and Md. Yusoff, N. and Zaki, S. A. (2016) Q-switched Thulium-doped fiber laser using nitrogen-doped graphene in linear and ring cavity. In: 6th IEEE International Conference on Photonics, ICP 2016; Kuching, Sarawak; Malaysia, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Mohd. Shariff, Normawati and Wong, Boon Wei (2018) Evaluation of occupational stress of royal Malaysian navy radar plotters. In: Proceedings of the 2nd Master Project Symposium.

Mohd. Shariff, Normawati and Yahya, Izzah (2018) The impact of transactional uncertainties in supply chain on sales performance. In: 2nd Proceedings of Master Project Symposium.

Mohd. Tobi, Siti Noraini and Masrom, Maslin and Mohammed, Azman and Abdullah, Mohd. Nasir (2015) The moderating effect of psychological factors towards the diffusion of a web-based health information service (WBHIS). In: 3rd International Conference on Social Sciences Research 2015 (ICSSR 2015), 8-9 Jun, 2015, Kuala Lumpur, Malaysia.

Mohd. Yusof, Khairiyah and Samsuri, Nur Shahira and Alias, Maizam and Mohd. Mahdzir, Akbariah (2022) Activating first-year engineering students' conation to learn. In: 129th ASEE Annual Conference and Exposition: Excellence Through Diversity, ASEE 2022, 26 June 2022 - 29 June 2022, Minneapolis, Minnesota.

Mohd. Yusof, Mohd. Rashid and Hasrizam, C. M. and Hussein, Norelyza and Hashim, Nur Hasyimah (2015) Experimental and theoretical performance of Mr-Deduster as a fine particle emission control system. In: International Conference on Fluids & Chemical Engineering, 25-27 Nov, 2015, Langkawi, Malaysia.

Mohd. Yusof, Mohd. Rashid and Lim, S. F. and A., Rahmalan (1997) Size segregated of atmospheric sulphate aerosols in Johor Bahru. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mohd. Yusoff, Mohd. Rashid and K., Sathiasilan and Mat, Ramli (1997) Point source SO2 dispersion modeling under various stack heights and meteorological conditions. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October, 1997, Hyatt Regency, Johor, Malaysia.

Mohd. Zaki, Mohd. Zahlan and Kamarudin, Md. Nor (2005) Tropospheric delay effects on relative GPS height determination. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27-29 September 2005, Pulau Pinang.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Mukhlas, N. A. and Najafian, G. (2016) Prediction of offshore structural response extreme values by modified finite-memory nonlinear system modeling. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2015) Comparison of the extreme responses from different methods of simulating wave kinematics. In: 6th International Conference on Computational Methods in Marine Engineering, MARINE 2015, 15-17 Jun 2015, Rome, Italy.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Derivation of Morison's force coefficients by three alternative forms of the method of moments. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Prediction of 100-year responses of fixed offshore structures using the modified version of finite memory nonlinear system models. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Mohd. Zul, Syamimi and Iwamoto, Koji and Mohd. Rahim, Maziahtul Ashikin and Abdullah, Norhayati and Mohamad, Shaza Eva and Shimizu, Kazuya and Hara, Hirofumi (2020) Production of liquid fertilizer from chicken feather waste by using subcritical water treatment for plant and algal growth. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Mohd. Zul, Syamimi and Sajari, Nurul Syazwani and Othman, Nor’azizi and Iwamoto, Koji and Goto, Masafumi and Mohamad, Shaza Eva and Mad Nordin, Mariam Firdhaus and Sugiura, Norio and Zakaria, Zuriati and Hara, Hirofumi (2015) Induction condition of secondary metabolites production in soil actinomycetes, rhodococcus jostii RHA1. In: International Conference on Sustainability Initiatives (ICSI 2015) in conjunction with 8th ASEAN Environmental Engineering Conference (AEEC), 24-25 August, 2015, Kuala Lumpur, Malaysia.

Mohmad, Azlan and Shapiai, M. Ibrahim and Shamsudin, M. Solehin and Abu, Mohd. Azlan and Abd. Hamid, Amirah (2021) Investigating performance of transformer health index in machine learning application using dominant features. In: 6th International conference on Advanced Technology and Applied Sciences, ICaTAS 2021, 12 - 14 October 2021, Cairo, Egypt.

Mohsin, Rahmat and Yaacob, Zulkefli and Abdul Majid, Zulkifli and Ashraf, Shameed (2005) Prototype development of a single step pressure regulation system for the natural gas motorcycle. In: The 21st International Conference & Exhibition for the LNG, LPG and Natural Gas Industries, GASTECH 2005 Bilbao International Exhibition, 14-17 March 2005, Bilbao, Spain.

Mohtar, Mohd. Ajib and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2005) Modelling and optimisation of eurycoma longifolia extraction utilisation a recirculating flow extractor. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Mokhtar, N. A. and Tap, F. M. and Talib, S. Z. A. and Khairudin, N. A. (2021) Docking study for assessment of wound healing potential of isosakuratenin isolated from Chromolaena odorata: An In-silico approach. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia. (In Press)

Morad, Noor Azian and Aris, Nor Ilia Anisa and Iwai, Yoshio and Ismail, Mohd. Halim Shah (2015) Optimization of accelerated water extraction for ginger bioactive compounds. In: The 10th Asian Control Conference (ASCC 2015), 31 May-3 Jun, 2015, Kota Kinabalu, Malaysia.

Morad, Nor Ilia Anisa and Aris, Noor Azian and Sarip, Mohd. Sharizan and Iwai, Yoshio (2014) Temperature effects on diffusion coefficient for 6-gingerol and 6-shogaol in subcritical water extraction. In: International Conference on Science and Engineering in Mathematics, Chemistry and Physics 2014, 13-14 Jan, 2014, Indonesia.

Muhamad, Ida Idayu and Md. Zaki, Nurul Asyikin and Md. Salleh, Liza (2007) Drying characteristic of Carica papaya L. during microwave vacuum treatment. In: 10th ASEAN Food Conference 2007, August 21-23, Kuala Lumpur, Malaysia.

Muhamad, Ida Idayu and Md. Zaki, Nurul Asyikin and Md. Salleh, Liza and Khairuddin, Nozieana (2007) Drying characteristics of papaya (carica papaya L.) during microwave-vacuum treatment. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Muhamad, M. A. H. and Che Hasan, R. (2022) Seagrass habitat suitability models using multibeam echosounder data and multiple machine learning techniques. In: 11th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2022, 7 March 2022 - 9 March 2022, Virtual, Online.

Muhamad Apandi, N. H. and Ahmad, H. and Ibrahim, M. H. and Ahmad, F. (2021) Amplitude modulator of multi-walled carbon nanotubes/chitin in the c-band region. In: 4th Photonics Meeting 2021, PM 2021, 15 - 16 September 2021, Terengganu, Virtual.

Muhamad Pauzi, Fazarizul Hashidi and Md. Daud, Mohd. Yusof and Mohamed, Ahmad Yusri (2021) Towards the introduction of elements that contribute to the LRT operation sustainability through technology-based ancillary revenue. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 - 24 June 2021, Kuala Lumpur, Virtual.

Muhammad, Badaruddin and Ibrahim, Zuwairie and Shapiai, Mohd. Ibrahim and Mohamad, Mohd. Saberi and Mohd. Azmi, Kamil Zakwan and Mat Jusof, Mohd. Falfazli (2019) Oppositional learning prediction operator with jumping rate for Simulated Kalman Filter. In: 2019 International Conference on Computer and Information Sciences, ICCIS 2019, 3 - 4 April 2019, Sakaka, Saudi Arabia.

Muhammad, Ida Idayu and Khairuddin, Nozieana (2007) Antimicrobial effects on starch based films incorporated with lysozymes. In: 10th ASEAN Food Conference 2007, August 21-23, Kuala Lumpur, Malaysia.

Muhammad, Ida Idayu and Mohd. Noor, Mohd. Azemi (1997) Development of blend films of poly(3-hydroxy)butyrate and celulose triacetate: Thermal and crystalline properties. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Muhammad, N. M. and Sidik, N. A. C. and Saat, A. and Asako, Y. and Japar, W. M. A. A. and Musa, G. H. and Yuof, S. N. A. (2021) Effect of corrugated minichannel variable width on entropy generation for convective heat transfer of alpha-Alumina-water nanofluid. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 - 24 June 2021, Kuala Lumpur, Virtual.

Muhammad Tahir, Muhammad and Haron, Nuzul Azam and Alias, Aidi Hizami and Al-Jumaa, A. T. and Muhammad, Isa Bala and Harun, Aizul Nahar (2018) Applications of building information model (BIM) in Malaysian construction industry. In: 1st International Conference on Architecture and Civil Engineering, ICACE 2017, 8 May 2017 through 9 May 2017, Armada Hotel Petaling Jaya, Malaysia.

Muhammad Zaidi, Nor Fadzilah and Md. Illias, Rosli (2007) Cloning of beta-xylosidase gene from aspergillus niger. In: The 32nd Annual Conference Of The Malaysian Society For Biochemistry And Molecular Biology , 5th-6th September 2007, Eastin Hotel, Petaling Jaya.

Muharam, Farrah Merlinda and Tarragon, Maria Antonia and Salleh, Zulkifli Mohamad (2015) Valuing technology, setting up strategy: real option and SMEs. In: Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET), 11-13 Oct, 2015, Melaka, Malaysia.

Muhd. Amir, Nur Izdihar and Dziyauddin, Rudzidatul Akmam and Mohamed, Norliza and Md. Din, Nor Syahida (2022) Real-Time Threshold-Based Fall Detection System using wearable IoT. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Mukhlas, N. A. and Zaki, N. I. M. and Husain, M. K. A. and Najafian, G. (2019) Efficient methods for the prediction of non-gaussian stochastic response of offshore structure. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Mulop, Normah and Abdul Aziz, Ramlan and Ku Hamid, Ku Halim (1991) Characteristics of granular activated carbon from UTM pilot plant. In: Second Particulate Technology Conference PARTEC 91.

Mulop, Normah and Ku Hamid, Ku Halim and Abdul Aziz, Ramlan (1991) Penghasilan karbon teraktif daripada buangan pertanian. In: Kertaskerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), 18 November 1991, UTM Kuala Lumpur.

Muminov, Z. and Manaf, N. A. and Kuljanov, U. (2016) Spectral properties of the discrete Schrödinger operator with non-local potential. In: 2nd International Conference on Mathematical Sciences and Statistics: Innovations Through Mathematical and Statistical Research, ICMSS 2016, 26 January 2016 through 28 January 2016, Kuala Lumpur; Malaysia.

Murad, H. and Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Mukhlas, N. A. and Syed Ahmad, S. Z. A. and Mat Soom, E. (2022) Current practice of early leak detection methods for underground storage tanks. In: 9th Conference on Emerging Energy and Process Technology 2021, CONCEPT 2021, 24 November 2021 - 25 November 2021, Johor Bahru, Johor, Malaysia.

Murugan, C. Sri and Abd. Aziz, Mustafa Kamal and Morad, Noor Azian and S., Micheal (1997) Separation of carotene from crude palm oil by membranes. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Musa, Tajul Ariffin and Setan, Halim and Ses, Shahrum and Abdullah, Khairul Anuar and M., Arief (2008) Modeling of the communication link for data correction in network-rtk. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Muslim, M. S. M. and Ismail, Z. H. (2021) Stability-certified deep reinforcement learning strategy for UAV and lagrangian floating platform. In: 18th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2021, 19 May 2021 - 22 May 2021, Chiang Mai.

Mussa, Z. H. and Al-Qaim, F. F. and Yuzir, A. and Shameli, K. (2020) Electrochemical removal of metoprolol using graphite-polyvinyl chloride composite as anode. In: IOP Conference Series: Earth and Environmental Science, 25-26 Nov 2019, Putrajaya, Malaysia.

Mustapa, M. A. and Ambran, S. and Yuzir, A. (2020) Application of carbon nanotubes and graphene to develop the heavy metal electrochemical sensor. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Mustapa, Muzani and Mustapa, Fara Diva and Misnan, Mohd Saidin and Mahmud, Syamsul Hendra (2012) Exploiting intranet technology in facilitating knowledge management among quantity surveying's consulting firms. In: 2012 IEEE Colloquium on Humanities, Science and Engineering Research, CHUSER 2012, 3 December 2012 through 4 December 2012, Kota Kinabalu, Sabah; Malaysia. (Submitted)

Nadhiya, N. A. and Yakub, F. and Ariff, H. and Azizan, A. and Rasit, Z. A. and Ahmad Zaki, S. and Abd. Fattah, A. Y. and Mori, Y. (2019) Vehicle high speed stability analysis through integrated control. In: 2018 IEEE Conference on Systems, Process and Control, ICSPC 2018, 14-15 Dec 2018, Hatten Square, Melaka, Malaysia.

Nagalingam, Vanisri and Ibrahim, Roslina (2015) Review of user experience (UX) frameworks for educational games. In: Proceeding of International Conference on Information Technology & Society (ICITS 2015), 8-9 June, 2015, Kuala Lumpur, Malaysia.

Nairozle, Muhammad Imran and Ibrahim, Muhammad Nur Arif and Jasmi, Kamarul Azmi (2018) Sains-Teknologi dan Ilmu Agama Menurut Bahasa al-Quran dan Hadis. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Naisan, Izzul Hidayat and Ibrahim, Suhaimi (2009) A reverse engineering process to support software design document generator. In: 5th Postgraduates Annual Research Seminar, 2009, Johor Bahru.

Nakajima, N. and Hayakawa, H. and Kitajima, T. and Aihara, T. (2015) Interaction of inputs in hippocampal granule cells with inhibitory connections. In: Society for Neuroscience 2015, 17-21 Oct, 2015, USA.

Nasef, Mohamed Mahmoud and Saidi, Hamdani (2004) Structure-property relationships in radiation grafted poly(tetrafluoroethylene)-graft-polystyrene sulfonic acid membranes. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohamed Senna, Magdy (2004) Hydrolysis of sucrose by radiation grafted sulfonic acid membrane. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Nasef, Mohamed Mahmoud and Sopiah, Raja Rajeswati and Mohd. Dahlan, Khairul Zaman (2004) Preparation of polymer electrolyte membrane for lithium batteries by radiation-induced graft copolymerization. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Nasir, M. F. M. and Rahim, A. R. A. and Hamzah, H. S. (2016) Supply chain management framework development for new multiple life cycle product development. In: International Conference on Industrial Engineering and Engineering Management, IEEM 2016, 4 December 2016 through 7 December 2016, Bali; Indonesia.

Nasorudin, N. N. and Hassan, M. I. and Zulkifli, N. A. and Rahman, A. A. (2016) Geospatial database for strata objects based on land administration domain modeL (LADM). In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Nazir, Muhammad Izzuddin and Che Noh, Muhammad Irfan Zikri and Basiron, Bushrah (2019) Media Sosial dan Wanita Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Nazmi, N. and Abdul Rahman, M. A. and Mohammed Ariff, M. H. and Ahmad, S. A. (2019) Generalization of ann model in classifying stance and swing phases of gait using emg signals. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018, 3-6 Dec 2018, Borneo Convention Centre KuchingDemak-Isthmus Bridge, Jalan Keruing, SejingkatKuching; Malaysia.

Nazmi, N. and Saipol, H. F. S. and Yusof, F. and Mazlan, S. A. and Rahman, M. A. A. and Nordin, N. A. and Johari, N. and Aziz, S. A. A. (2020) Parameter estimation of extreme rainfall distribution in Johor using Bayesian Markov Chain Monte Carlo. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, 25-26 Nov 2019, Kuala Lumpur, Malaysia.

Nazmi, N. and Shin-Ichiroh, Y. and Rahman, M. A. A. and Ahmad, S. A. and Adiputra, D. and Zamzuri, H. and Mazlan, S. A. (2016) Fuzzy logic for walking patterns based on surface electromyography signals with different membership functions. In: 2016 6th International Workshop on Computer Science and Engineering, WCSE 2016, 17-19 June 2016, Tokyo, Japan.

Ng, Be Cheer and Ismail, Ahmad Fauzi (2000) A preliminary study of flat sheet asymmetric membrane formation for gas separation applications. In: National Symposium On Polymeric Materials 2000, 1-2 June 2000, Universiti Sains Malaysia, Penang. (Submitted)

Ng, C. R. and Than, J. C. M. and Noor, N. M. and Rijal, O. M. (2016) Double segmentation method for brain region using FCM and graph cut for CT scan images. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Nguyen, Thinh H. and Nguyen, Hien D. and Pham, Vuong T. and Tran, Dung A. and Selamat, Ali (2022) Legal-Onto: An ontology-based model for representing the knowledge of a legal document. In: 17th International Conference on Evaluation of Novel Approaches to Software Engineering, ENASE 2022, 25 - 26 April 2022, Virtual, Online.

Nifa, F. A. A. and Rahim, S. A. and Rani, W. N. M. W. M. and Ismail, M. N. (2016) Collaborative procurement for developing a sustainable campus. In: 2016 International Conference on Applied Science and Technology, ICAST 2016, 11 April 2016 through 13 April 2016, Kedah; Malaysia.

Nik Alwi, N. N. A. and Hassan, N. H. and Baharuden, A. F. and Bakar, N. A. A. (2019) Data visualization for supplier selection using business intelligence dashboard. In: 6th International Conference on Advances in Visual Informatics, IVIC 2019, 19-21 Nov 2019, Bangi, Malaysia.

Nik Zain, Nik Nur Anis Awadah and Zuikafly, Siti Nur Fatin and Jasni, Nur Afiqah Husna and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2020) Passively Q-switched tri-wavelength erbium-doped fiber laser with aluminium-based saturable absorber. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE 2020, 28 - 29 July 2020, Kuala Lumpur.

Nikfard, Pourya and Najafabadi, Maryam Khanian and Rouhani, Babak Darvish and Nikpay, Fatemeh and Selamat, Harihodin (2013) An empirical study into model testability. In: International Conference on Informatics and Creative Multimedia 2013 (ICICM'13), 4-6 Sept, 2013, Kuala Lumpur, Malaysia.

Nitamakwuavan, S. and Abd. Rahim, N. (2022) Techno-economic feasibility of biogas renewable energy plant: A case of Malaysian palm oil mill. In: 2022 IEEE Technology and Engineering Management Society Conference - Asia Pacific, TEMSCON-ASPAC 2022, 19 - 22 September 2022, Bangkok, Thailand.

Noor, F. M. and Jamaludin, K. R. and Ahmad, S. (2016) Production of stainless steel 316L foam with different solid loading. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Noor, N. M. and Rijal, O. M. and Than, J. C. M. and Kassim, R. M. and Yunus, A. (2016) Regression as a tool to measure segmentation quality and preliminary indicator of diseased lungs. In: 7th Pacific-Rim Symposium on Image and Video Technology, PSIVT 2015, 25-27 Nov 2015, Auckland, New Zealand.

Nor Muhammad, Nor Aziah Amirah and Khairuddin, Uswah and Yusof, Rubiyah and Nik Azmi, Nik Mohamad Aizuddin and Yunus, Ridzuan (2021) Esophagus detection using deep learning method. In: 3rd International Conference on Electrical, Communication and Computer Engineering, ICECCE 2021, 12 - 13 June 2021, Kuala Lumpur, Malaysia.

Mohd. Kassim, Norazah and Nor Anuar, Aznah and Halim, Hakim and Sharani, Noor Atiqah and Md. Aris, Alijah and Khor, Bee Chin (2022) To optimize sequencing batch reactor (SBR) and monitor aerobic granular sludge (AGS) development for domestic wastewater treatment. In: The 9th AUN/SEED-Net Regional Conference on Natural Disaster, 15 Disember 2021 - 16 Disember 2021, Virtual, Online.

Norazni, S. A. and Yahya, W. J. and Ithnin, A. M. and Kadir, H. A. and Razak, I. F. A. and Bahar, N. D. and Sugeng, D. A. and Ramlan, N. A. (2016) Stability behavior of non-surfactant water-in-diesel emulsion fuel using microscopic observation. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Nordin, N. H. and Kaida, N. and Othman, N. A. and Akhir, F. N. M. and Hara, H. (2020) Reducing food waste: Strategies for household waste management to minimize the impact of climate change and contribute to Malaysia’s sustainable development. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Nordin, N. N. and Zainuddin, Z. M. and Kuan, Yew Wong (2007) Metaheuristics for solving facility layout problems: concepts and trends. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Science 2007 (ICOMS 2007), 2007, Johor Bahru.

Nordin, Nur Azmah and Saeed Farahany, Saeed Farahany and Abu Bakar, Tuty Asma and Ourdjini, Ali and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Yahaya, Hafizal (2020) Effect of barium on the structure and characteristics of Mg2Si reinforced particles Al–Mg2Si–Cu in situ composite. In: Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials: ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Nordin, Nur Hidayu and Mohammad, Nur Syuhada and Mohamad, Ahmad Marzuki (2019) Media Sosial dan Instagram Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Nordin, Syarifah Zyurina and Johar, Farhana and Abu, Noratikah (2021) Linear programming model for investment problem in maximizing the total return. In: 28th Simposium Kebangsaan Sains Matematik, SKSM 2021, 28 July 2021 - 29 July 2021, Kuantan, Pahang.

Nordin, Zuhaidah and Wan Mohd. Akib, Wan Aziz and Mat Amin, Zulkarnaini (2008) Breakwater structural monitoring using VRS-RTK technique. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Nordin, Zuhaidah and Yahya, Mohd. Hafiz and Wan Mohd. Akib, Wan Aziz and Mat Amin, Zulkarnaini (2008) The utilization of RTK-GPS for real-time structural health detection. In: International Conference on Civil Engineering (ICCE 2008), 12-14 May 2008, Hyatt Regency Hotel, Kuantan, Pahang, Malaysia.

Abdul Manaf, Norhuda and Abbas, Ali (2018) Economic and environmental sustainability of low carbon power generation: relevancy in Malaysia green technology master plan (GTMP). In: 4th International Conference of Chemical Engineering & Industrial Biotechnology.

NorRuwaida, J. and Haslina, H. and Rashid, M. and Najihah, A. R. and Masdiana, N. and Dewika, M. and Ammar, M. R. and Noor, N. M. and Afiq Daniel, A. (2020) Adsorption of volatile organic compound (VOCs) over formulated prechar. In: 2nd International Conference on Green Environmental Engineering and Technology 2020, IConGEET 2020, 23 - 24 July 2020, Seoul, Virtual.

NurAisyah, S. and Jusoh, N. W. C. and Md. Ali, Abd. Halim and Jamian, Nor Ruwaida and Mohd. Pa'ad, M. P.Khairunnisa (2021) Enhanced carbon dioxide adsorption by potassium hydroxide modified peat soil as porous adsorbent. In: 1st International Conference on Biomass Utilization and Sustainable Energy 2020, ICoBiomasSE 2020, 15 - 16 December 2020, Virtual, Online.

Nuraisyah, S. and Khairunnisa, M. P. and Norruwaida, J. and Md. Ali, A. H. and Dewika, M. and Rashid, M. (2020) Soil with high porosity as an excellent carbon dioxide adsorbent carbon-rich soil as an effective adsorbent for carbon dioxide. In: 2nd International Conference on Civil and Environmental Engineering, CENVIRON 2019, 20 - 21 November 2019, Langkawi, Kedah.

Nurbaya, Z. and Wahid, M. H. and Rozana, M. D. and Annuar, I. and Alrokayan, S. A. H. and Khan, H. A. and Rusop, M. (2016) Fabrication of PVDF-TrFE based bilayered PbTiO3/PVDF-TrFE films capacitor. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Nurhidayah, A. and Zaini, N. and Zulhaziman, M. and Salleh, M. and Zulbadli, N. and Mohamad, Noor Ashikin and Ezaty, S. N. and Shafie, N. S. and Mohd. Sahri, Dzulkarnain and Mohd. Najib, Siti Sarah Aliah (2022) Evaluation of physically modified kenaf core adsorbent for carbon dioxide adsorptive study. In: 9th Conference on Emerging Energy and Process Technology 2021, CONCEPT 2021J, 24 November 2021 - 25 November 2021, Johor Bahru, Johor.

O. M., Nimir and M. I., Abdul Mutalib and R., Adnan (1997) Recycling of used lubrication oil by solvent extraction-A guideline for single solvent design. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Omar, Abdul Hafidz and Syahrom, Ardiyansyah and Tan, Mei Jing and Mohd Latip, Hadafi Fitri (2015) A questionnaire approach based on the technology acceptance model for integrated multiple angkle technology device on patient psychology and progress application. In: International Conference of Psychology and Social Science (ICPSS) 2015, 15 Dec, 2015, Johor Bahru, johor.

Omar, Rosmini and Suhairi, Azzah Hanim and Ahmad, Fauziah Sh. and Hassan, Zulkefli A. (2015) Citizen-innovators: what’s beneath quadruple helix. In: Scientific Cooperations Workshops on Social Sciences, 8-9 May, 2015, Istanbul, Turkey.

Ong, K. L. and Musa, Md. Nor and Abdul Latif, Ainullotfi (2004) A state approach to the management of concurrent design task design of symmetrical woble plate compressor. In: International Seminar And Workshop on Engineering Design In International product Development, 2004, Zielona Gora, Rydzyna, Poland.

Ono, T. and Hagishima, A. and Tanimoto, J. and Zaki, S. A. and Hisham, N. A. (2019) Statistical analysis of air conditioning peak loads of multiple dwellings. In: 13th REHVA World Congress, CLIMA 2019, 26-29 May 2019, Bucharest, Romania.

Ooi, Wei Ling and Hamzah, Azura and Mohamed, Norliza and Mohamed Mafroos, Mahroof (2022) Performance analysis of passively Q-switched fibre laser by SWCNT-PVA saturable absorber. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Othman, N. I. and Shahril, M. and Ramli, S. and Malek, R. A. and Mohd. Noor, N. and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2007) Effect of coconut oil emulsion on encapsulation of lactobacillus bulgaricus and survival in simulated gastrointest conditions. In: 10th ASEAN Food Conference 2007, August 21-23, Kuala Lumpur, Malaysia.

Othman, Norasikin and Chan, Kit Hie and Goto, Masahiro and Mat, Hanapi (2005) Emulsion liquid membrane extraction of silver from photographic waste using cyanex 302 as a mobile carrier. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Othman, B. A. and Marto, A. (2020) Liquefaction resistance of coarse sand-fine mixtures soil under two-way cyclic loading. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, 25-26 November 2019, Kuala Lumpur, Malaysia.

Othman, M. R. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2003) Process fault detection and diagnosis using Boolean representation on fatty acid fractionation column. In: International Conference on Chemical and Bioprocess Engineering ICCBPE 2003 , 27-29 August 2003, Kota Kinabalu. (Submitted)

Phan, Van Hung and Nguyen, Quoc Dinh and Hoang, Dinh Thuyen and Nguyen, Tuan Hung and Le, Minh Thuy and Le, Trong Trung and Yamada, Yoshihide (2020) Estimations of matching layers effects on lens antenna characteristics. In: 6th EAI International Conference on Industrial Networks and Intelligent Systems, INISCOM 2020, 24 - 28 August 2020, Hanoi, Vietnam.

Pozai, Mohd Harizan and Ahmad, Muhammad Syaibani and Basiron, Bushrah (2018) Kemunduran Umat Islam dalam Sains dan Teknologi. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Puasa, Nor Aliffah and Hairom, Nur Hanis Hayati and Dzinun, Hazlini and Abu Bakar Sidik, Dilaeleyana and Sulaiman, Noralfishah and Che Jusoh, Nurfatehah Wahyuny and Abdul Jalil, Aishah (2020) Role of spheroids fibrous silica in ZnO nanoparticles via precipitation method. In: 2020 IEEE Student Conference on Research and Development (SCOReD), 27 - 29 September 2020, Batu Pahat, Malaysia.

Purba, L. D. A. and Abdullah, N. and Yuzir, A. and Ab. Halim, M. H. (2020) Characteristics and performance of aerobic granulation seeded with anaerobic bioflocs for treatment of domestic wastewater. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, 25-26 Nov 2019, Kuala Lumpur, Malaysia.

Pyae, Sanda Sone and Aung, Lwin Moe and Aminudin, B. A. and Oo, Kyaw Nyein (2015) Experimental verification of parameters in automobile crankshaft modelling for vibration analysis. In: Malaysia-Japan Joint International Conference 2015 (MJJIC2015), 13-15 Nov, 2015, Japan.

Quang, Do Nguyet and Selamat, Ali and Krejcar, Ondrej (2021) Recent research on phishing detection through machine learning algorithm. In: 34th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2021, 26 - 29 July 2021, Virtual, Online.

Qureshi, H. H. and Wong, D. H. T. (2020) Usability of user-centric mobile application design from visually impaired people's perspective. In: 14th International Conference on Universal Access in Human-Computer Interaction, UAHCI 2020, held as part of the 22nd International Conference on Human-Computer Interaction, HCII 2020, 19-24 July 2020, Copenhagen.

Quzwain, K. and Yamada, Y. and Rahman, N. H. A. and Rahman, T. A. (2019) Design of shaped offset dual-reflector antenna for 5g mobile base station. In: RFM 2018 - 2018 IEEE International RF and Microwave Conference, Proceedings, 17-19 Dec 2018, Penang, Malaysia.

Radin Salim, Kamilah and Puteh, Marlia and Mohd. Daud, Salwani (2012) Assessing students’ practical skills in basic electronic laboratory based on psychomotor domain model. In: International Conference on Teaching and Learning in Higher Education (ICTLHE 2012) in conjunction with RCEE & RHED 2012, 10-12 April 2012, Seremban, Malaysia.

Radin Salim, Kamilah and Puteh, Marlia and Mohd. Daud, Salwani (2011) Levels of practical skills in basic electronic laboratory: students’ perceptions. In: IEEE EDUCON Education Engineering 2011 – Learning Environments and Ecosystems in Engineering Education, 4-6 April 2011, Amman.

Radzakrishnan, Loganathan and Abu Husain, Mohd. Khairi and Mohammad, Roslina and Amrin, Astuty and Mohd. Akmal, Mohd. Akmal (2021) Platform conductor integrity management in life extension of ageing offshore wells. In: 6th International Conference on Civil, Offshore and Environmental Engineering, ICCOEE 2020, 13 - 15 July 2021, Kuching, Sarawak, Malaysia.

Rafiq, Nawshin and Gunawan, Teddy Surya and Ahmad, Robiah and A. Rahman, Azhar and Mira Kartiwi, Mira Kartiwi and Ihsanto, Eko (2021) Precision chemical compounds analysis in chemical tank reactors using conductivity analysis and model predictive control. In: 2021 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2021, 17 - 20 May 2021, Glasgow, Virtual.

Rahim, R. A. and Mahmood, N. H. N. and Masrom, M. (2016) The role of knowledge management in facilitating innovation for sustainable SMEs performance. In: International Conference on Technology, Informatics, Management, Engineering and Environment, TIME-E 2015, 7-9 Sept 2015, Toba Lake, Indonesia.

Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Design and analysis of a satellite-mount array-fed parabolic antenna by electromagnetic computations. In: 21st Asia-Pacific Conference on Communications, APCC 2015, 14-16 Oct 2015, Kyoto, Japan.

Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Improvement of contoured beam characteristics of a parabolic reflector antenna by asymmetrically distributed array feed. In: 4th IEEE Asia-Pacific Conference on Antennas and Propagation, APCAP 2015, 30 Jun - 3 July 2015, Indonesia.

Rahmasari, L. and Zain, A. R. M. and Hashim, A. M. (2016) Modeling of Si/Ge based two-dimensional photonic crystal nanocavity. In: 2nd International Seminar on Photonics, Optics, and Its Applications, ISPhOA 2016, 24-25 Aug 2016, Bali, Indonesia.

Rajoo, Sharmiladevi and Magalingam, Pritheega and Samy, Ganthan Narayana and Maarop, Nurazean and Idris, Norbik Bashah and Shanmugam, Bharanidharan and Perumal, Sundaresan (2020) Detecting false messages in the smartphone fault reporting system. In: 4th International Conference of Reliable Information and Communication Technology, IRICT 2019, 22 September 2019 - 23 September 2019, Johor Bahru, Malaysia.

Raju, G. and Mustafa, Azeman (1991) Optimization of combustion generated particulates in a residual fuel-fired furnace. In: Second Particulate Technology Conference PARTEC 91.

Ramachandran, Alice Tabitha and Ahmad, Norasnita and Miskon, Suraya and A. Iahad, Noorminshah and Mat Ali, Nazmona (2020) Factors influencing the adoption of social media in service sector small and medium enterprises (SMEs). In: 4th International Conference of Reliable Information and Communication Technology, IRICT 2019, 22 September 2019 - 23 September 2019, Johor Bahru, Malaysia.

Ramadhani, A. and Fauzi, H. and Wijayanto, I. and Rizal, A. and Shapiai, M. I. (2021) The implementation of EEG transfer learning method using integrated selection for motor imagery signal. In: 1st International Conference on Electronics, Biomedical Engineering, and Health Informatics, ICEBEHI 2020, 8 October 2020 - 9 October 2020, Virtual, Online.

Ramli, Muhammad Faris and Muniandy, Kishendran and Adam, Asrul and Ab. Nasir, Ahmad Fakhri and Shapiai, Mohd. Ibrahim (2020) Indoor occupancy estimation using carbon dioxide concentration and neural network with random weights. In: 6th International Conference on Software Engineering and Computer Systems, ICSECS 2019, 25 - 27 September 2019, Kuantan, Pahang.

Ramli, N. H. and Kamarudin, M. R. (2016) The channel measurement and modeling of implantable antenna at 6.0 GHz for wireless body area network. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Rani, W. N. M. W. M. and Kamarudin, K. H. and Razak, K. A. and Asmawi, Z. M. (2020) Climate change adaptation and disaster risk reduction in urban development plans for resilient cities. In: 1st International Conference on Urban Design and Planning, ICUDEP 2019, 10 September 2019, Semarang, Indonesia.

Rashid, N. N. M. and Lokman, M. Q. and Nordin, N. A. and Yahaya, H. and Ahmad, F. (2021) Silver nanoparticles embedded in polyvinyl alcohol based passive saturable absorber. In: 4th Photonics Meeting 2021, PM 2021, 15 - 16 September 2021, Terengganu, Virtual.

Rashidan, H. and Abdul Rahman, A. and Musliman, I. A. and Buyuksalih, G. (2022) Triangular mesh approach for automatic repair of missing surfaces of lod2 building models. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 5 October 2021 - 6 October 2021, Casablanca, Morocco.

Rasit Ali, Roshafima and Wan Abdul Rahman, Wan Aizan (2007) Effect of palm cooking oil as processing aids in biodegradable low density polyethylene (LDPE)/tapioca starch blends. In: 7th National Conference on Oil Palm Tree Utilisation , 13-15 November 2007, Sunway Resort Hotel & Spa, Bandar Sunway, Petaling Jaya.

Rastegari, Hamid and Shamsuddin, Siti Mariyam (2011) An immune system approach to personalize search result. In: 11th International Conference On Intelligent Systems Design And Applications (ISDA 2011).

Razak, Khamarrul Azahari and Abidin, Suriani and Wan Mohd. Rani, Wan Nurul Mardiah and Zainal, Megat Sahrir and Ibrahim, Ilyani and Asmawi, M. Zainora (2018) A framework of climate disaster resilience index (CDRI) for environmental components in Kukup Tanjung Piai, Johor. In: 39th Asian Conference on Remote Sensing (ACRS) 2018, 15 October 2018 - 19 October 2018, Kuala Lumpur, Malaysia.

Razali, N. M. and Ambran, S. and Zuikafly, S. N. F. and Yuzir, M. A. M. and Sapingi, H. H. J. (2021) Design and simulation of C-shaped optical fiber sensor. In: 2021 International Conference on Numerical Simulation of Optoelectronic Devices, NUSOD 2021, 13 - 17 September 2021, Turin, Italy.

Razali, Nurul Afiza and Noor, Hera and Kamarul Azmi, Jasmi (2019) Media Sosial dan Impak Negatif Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Razali, S. A. and Sidik, N. A. C. and Yusof, S. N. A. (2021) Numerical studies of fluid flow and heat transfer in microchannel heat sink with trapezoidal cavities, ribs and secondary channel. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 - 24 June 2021, Kuala Lumpur, Virtual.

Razami, Husna Hafiza and Ibrahim, Roslina and Aljuaid, Nada Mansour (2022) A review of models and factors for digital educational games acceptance and user experience. In: 6th International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2022, 20 October 2022 - 22 October 2022, Ankara, Turkiye.

Razib, Z. A. and Yusof, S. M. and Bakar, N. A. and Mohamad, W. M. S. W. (2019) The application of computational thinking and triz methodology in patent innovation analytics. In: 3rd International Conference of Reliable Information and Communication Technology, IRICT 2018, 23-24 June 2018, Kuala Lumpur, Malaysia.

Redzuan, A. A. and Anuar, A. N. and Zakaria, R. and Aminudin, E. and M. Yusof, N. and Jamil, A. H. (2019) A method of identifying critical road segment: a case study of peninsular Malaysia road network. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Ridwan, Intisar Ibrahim and Ali, Rosmah and Mohamed, Izzeldin Ibrahim and Adam, Mohamad Zulkefli and ElFadil, Nazar (2017) Rasch measurement analysis for validation instrument to evaluate students technical readiness for embedded systems. In: 2016 IEEE Region 10 Conference, TENCON 2016, 22 - 25 November 2016, Singapore.

Ripin, Adnan and Abdul Aziz, Ramlan and Saidi, Hamdani and M., Nor Hashimah and A. C., Norlela (1991) Penurasan minyak sawit mentah: Satu kajian awal. In: Kertaskerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), 18 November 1991, UTM Kuala Lumpur.

Rohim, Muhamad Amirul Sunni and Nazmi, Nurhazimah and Bahiuddin, Irfan and Mazlan, Saiful Amri and Nordin, Nur Azmah (2022) A mini review on modeling magnetostriction behavior of magnetorheological solid materials. In: 12th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2022, 21 - 22 May 2022, Virtual, Online.

Roslan, S. I. and Hassan, M. Z. and A. Rasid, Z. and Bani, N. A. and Sarip, S. and Md. Daud, M. Y. and Muhammad-Sukki, F. (2020) Mode i fracture toughness of optimized alkali-treated bambusa vulgaris bamboo by box-behnken design. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2018, 14-15 Nov 2018, Malacca, Malaysia.

Rosli, Mohd Aiman Shazlishah and Abd Hamid, Mohd Hafiez and Basiron, Bushrah (2018) Integrasi Pendidikan antara Islam serta Sains dan Teknologi. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Rosli, Muhammad Tasnim and Muniandy, Yogenathan and Jasmi, Kamarul Azmi (2019) Media Sosial dan Impak Tingkah Laku Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Rosli, Nenny Ruthfalydia and Khairuddin, Uswah and Nor Fathi, Muhammad Faris and Mohd. Khairuddin, Anis Salwa and Ahmad, Azlin (2021) Real-time KenalKayu system with YOLOv3. In: 2nd International Conference on Innovative Technology, Engineering and Sciences, iCITES 2020, 22 December 2020, Pekan, Pahang, Malaysia.

Rusli, Muhammad Haziq and Sjarif, Nilam Nur Amir and Siti Sophiayati Yuhaniz, Siti Sophiayati Yuhaniz and Kok, Steven and Kadir, Muhammad Solihin (2021) Evaluating the masked and unmasked face with LeNet algorithm. In: 17th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2021, 5 - 6 March 2021, Langkawi, Malaysia.

Sa'Don, N. F. and Alias, R. A. and Ohshima, N. (2015) Nascent research trends in MOOCs in higher educational institutions: A systematic literature review. In: 2014 International Conference on Web and Open Access to Learning, ICWOAL 2014, 25-27 Nov 2014, Dubai, UAE.

Saad, Saidah and Salim, Naomie and Zainuddin, Suhaila (2011) An early stage of knowledge acquisition based on Quranic text. In: 2011 International Conference On Semantic Technology And Information Retrieval.

Saad, Saidah and Salim, N. and Zainal, H. and Muda, Z. (2011) A process for building domain ontology: an experience in developing solat ontology. In: 2011 International Conference On Electrical Engineering And Informatics.

Sabili, Sufi Nazihah and Yahaya, Hafizal and Ahmad, Fauzan (2020) The effect of depth on fabrication of nanopore using one-step focused ion beam milling for DNA sequencing application. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE2020, 28 - 29 July 2020, Kuala Lumpur, Malaysia.

Sabri, Harris Abd. Rahman and Abdul Rahim, Abd. Rahman and Wong, Kuan Yew and Ismail, Syuhaida (2017) An overview of turbomachinery project in Malaysian oil and gas industry. In: 10th International Seminar on Industrial Engineering and Management: Sustainable Development In Industry and Management, ISIEM 2017, 7 - 9 November 2017, Tanjung Pandan - Belitung, Indonesia.

Sagitaningrum, F. H. and Kamaruddin, S. A. and Nazir, R. and Soepandji, B. S. and Alatas, I. M. (2020) Soil-solid interface shear strength review and its possibility on interlayer slope stability analysis. In: 3rd International Conference on Eco Engineering Development, ICEED 2019, 13 - 14 November 2019, Solo, Indonesia.

Sahmin, Samsuryadi and Shamsuddi, Siti Mariyam (2011) Writer identification based on hyper sausage neuron. In: International Conference Of Computing And Informatics 2011 (ICOCI).

Saidi, Hamdani and Abdul Aziz, Ramlan and Salleh, I. K. and Hassan, H. (1991) Development of gas separation system by membranes - Preliminary results of membranes characterization. In: Kertas Kerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima (1988-1990), 18 November 1991, UTM Kuala Lumpur.

Saidin, M. A. R. and Ismail, Ahmad Fauzi and Aziz, M. (2007) Optimization of home-built plasma enhanced chemical vapour deposition (PECVD) system. In: The 23rd Regional Conference On Solid State Science and Technology 2007, 27-29 November 2007, Hyatt Regency Hotel, Johor Bahru, Malaysia.

Saidina Amin, Nor Aishah and Ammasi, Sriraj (2005) Dual-bed catalytic system for direct conversion of methane to liquid hydrocarbons: study of selected reaction parameters. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Saidina Amin, Nor Aishah and Ammasi, Sriraj (2005) Process optimization studies of dual-bed catalytic reactor system for conversion of methane to liquid hydrocarbons using design of experiments (DOE). In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies,UTM.

Saidina Amin, Nor Aishah and Parulekar, Satish J. (1997) The effect of imperfect mixing on gas-liquid reactions: Linkage between liquid-film and bulk liquid. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Saidina Amin, Nor Aishah and Soon, Ee Peng (2007) A thermodynamic equilibrium analysis on oxidation of methane to higher hydrocarbons. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia. (Unpublished)

Sakri, F. M. and Ali, M. S. M. and Salim, S. A. Z. S. (2016) Computational investigations and grid refinement study of 3D transient flow in a cylindrical tank using OpenFOAM. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Sakri, F. M. and Mat Ali, M. S. and Zaki, S. A. (2019) Benchmark on the dynamics of liquid draining inside a tank. In: 3rd International Conference on Power, Energy and Mechanical Engineering, ICPEME 2019, 16-19 Feb 2019, Prague, Czech Republic.

Saleh, A. and Yuzir, A. and Abustan, I. (2019) Flood mapping using sentinel-1 SAR imagery: case study of the November 2017 flood in Penang. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Salehi, Saber and Selamat, Ali (2011) Hybrid simple artificail immune system (SAIS) ans particle swarm optimization (PSO) for spam detection. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Salim, Kamilah Radin and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah (2013) The achievement of laboratory work learning outcomes: students perceptions. In: Research In Engineering Education Symposium – Kuala Lumpur, 4 July through 6 July, 2013, Putrajaya, Malaysia.

Salim, N. Dayana and Derawi, D. and Zamzuri, H. and Rahman, M. A. A. and Abdullah, S. S. (2015) Robust attitude tracking control of hexarotor MAVs using plug-in gain scheduling robust compensator technique. In: 2015 IEEE International Conference on Mechatronics, ICM 2015, 6-8 March 2015, Nagoya.

Salleh, Eraricar and Muhamad, Ida Idayu (2007) Mechanical properties and antimicrobial analysis of antimicrobial starch-based film. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May-1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Salleh, Eraricar and Muhammad, Ida Idayu (2007) Inhibition of bacillus subtilis and escherichia coli by antimicrobial starch-based film incorporated with lauric acid and chitosan. In: 3rd CIGR Section VI International Symposium on Food And Agricultural Products: Processing And Inovations 2007, 24-26 September 2007, Naples, Italy.

Salleh, Eraricar and Muhammad, Ida Idayu (2007) Starch-based antimicrobial films incorporated with lauric acid and chitosan. In: 10th ASEAN Food Conference 2007, August 21-23, Kuala Lumpur, Malaysia.

Salleh, Khairul Fahzan and Mohd. Fadzil, Syazwani and Md. Daud, Mohd. Yusof (2020) Ergonomic Risk Assessment on Welding Practical Work on learning process at Malaysia polytechnic diploma of engineering programme. In: 2nd Joint Conference on Green Engineering Technology and Applied Computing 2020, IConGETech 2020 and International Conference on Applied Computing 2020, ICAC 2020, 4 - 5 February 2020, Bangkok, Thailand.

Salleh, Mohd Iszatul and Azman, Muhd Wafi Nazrin and Ihwani, Siti Suhaila (2018) Kewujudan Sains dan Teknologi di Andalusia. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Salleh, N. and Mohd. Azmi, N. F. and Yuhaniz, S. S. (2021) An adaptation of deep learning technique in orbit propagation model using long short-term memory. In: 3rd International Conference on Electrical, Communication and Computer Engineering, ICECCE 2021, 12 June 2021 - 13 June 2021, Kuala Lumpur, Malaysia.

Salleh, S. and Muhamad, R. and Abdillah, M. H. (2019) Performance of ralumac micro surfacing at blackspot eastbound latar highway. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Salleh, S. and Muhamad, R. and Abdillah, M. H. and Ahmad Shahimi, A. F. (2019) Performance of pavement preservation with ralumac micro surfacing atlatar highway. In: 10th Malaysian Road Conference & Exhibition 2018, 29-31 Oct 2018, Selangor, Malaysia.

Samad, Hudair and Hussain, Muneeb Ali and Mumtaz, Faizaan and Badshah, Mujahid and Khattak, M. A. (2015) Design and experimental validation of horizontal axis ocean current turbine. In: 2nd International Conference on Power Generation Systems and Renewable Energy Technologies, 10-11 June, 2015, Pakistan.

Samion, S. R. L. and Shaharuddin, N. H. and Mat Ali, M. S. (2019) Grid convergence study for detached-eddy simulation of flow over rod-airfoil configuration using openfoam. In: 2018 4th International Conference on Mechanical and Aeronautical Engineering, ICMAE 2018, 13-16 Dec 2018, Bangkok, Thailand.

Samsudin, Sani Amril and Hassan, Azman and Mokhtar, Munirah and Syed Jamaludin, Syed Mustafa (2003) Chemical resistance of polystyrene/polypropylene blends: effect of blend compositions and SEBS content. In: 3rd International Conference on Recent Advances in Materials, Minerals and Environment, 5-7th May 2003, The Bayview Beach Resort Penang, Malaysia. (Unpublished)

Sani, A. S. and Islam, A. K. M. M. and Naz'Ri, Mahrin M. and Al-Mamoon, I. and Baharun, S. and Komaki, S. and Imai, M. (2015) A framework for remote monitoring of early heart attack diagnosis system for ambulatory patient. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8-10 Dec 2014, Kuala Lumpur, Malaysia.

Sanip, Siti Faraiza and Abu Bakar, Halimahtun Saadiah and Ihwani, Siti Suhaila (2018) Integrasi Perkembangan Sains, Hukum, Teknologi dan Ekonomi di Dunia Islam. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Sanjaya, Yuwana and Prabowo, Aditya Rio and Imaduddin, Fitrian and Nordin, Nur Azmah (2021) Design and analysis of mesh size subjected to wheel rim convergence using finite element method. In: 26th International Conference on Fracture and Structural Integrity, IGF26 2021, 26 - 28 May 2021, Turin, Italy.

Sanni, M. L. and Hashim, A. H. A. and Hassan, W. H. and Anwar, F. and Ahmed, G. S. M. (2016) Optimized routing algorithm for mobile multicast source in wireless mesh networks. In: 11th International Conference on Innovations in Information Technology, IIT 2015, 1-3 Nov 2015, Dubai, United Arab Emirates.

Sariff, N. and Ismail, Z. H. (2019) Broadcast and event triggered distributed consensus controller for multi agent motion coordination systems. In: 12th Asian Control Conference, ASCC 2019, 9-12 June 2019, Kitakyusyu International Conference Center Kitakyushu-shi, Japan.

Sathiabama T Thirugnana, Lallendran Rajendran (2018) Mass rapid transit elevated stations as solar electricity generation. In: 2nd International Conference on Smart Sensors and Application, ICSSA 2018, 24 July 2018 - 26 July 2018, Hilton Hotel Kuching, Malaysia.

Saude, Sergio (2011) Righting the wrong : areas of the English language Malaysian students. In: 4th Biennial International Conference On The Teaching And Learning Of English In Asia (TIEIA4) 2011 : Forging Ahead.

Seeni Mohd., Mohd. Ibrahim and Md. Reba, Mohd. Nadzri (2004) Sea surface temperature retrieval using TRMM microwave imager satellite data in the South China Sea. In: International Symposium and Exhibition on Geoinformation 2004, 21- 23 September 2004, Serdang, Selangor.

Selamat, A. and Ibrahim, R. and Isah, S. S. and Krejcar, O. (2020) Finger-vein classification using granular support vector machine. In: 12th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2020, 23-26 March 2020, Phuket, Thailand.

Selamat, Ali and Ibrahim, Roliana and Isah, Sani Suleiman and Krejcar, Ondrej (2020) Finger-vein classification using granular support vector machine. In: 12th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2020, 23 - 26 March 2020, Phuket, Thailand.

Sellappah, Jey Ganesh and Haron, Habibah @ Norehan and Abd. Fatah, Abdul Yasser (2021) Technology application in logistic and supply chain management. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 - 11 March 2021, Virtual, Online.

Seman, N. and Tarmizi, Z. I. and Ali, R. R. and Salleh, M. S. N. (2022) Modified surface polymer prepared by using radiation-induced grafting co-polymerization method and its application: a mini review. In: 9th AUN/SEED-Net Regional Conference on Natural Disaster, RCND 2021, 15 December 2021 - 16 December 2021, Virtual, Online.

Ses, Shahrum (2007) Towards the optimum design of GPS monitoring network for subsidence monitoring of offshore platforms in Malaysia waters. In: International Symposium on Geoinformation and Exhibition & International Symposium on GPS/GNSS 2007 , 2007, PERSADA, Johor Bahru.

Sha'rani, S. S. and Jusoh, N. W. C. and Abouzari Lotf, E. and Ahmad, A. and Ali, R. R. (2020) Evaluation of perfluorinated sulfonic acid membranes for vanadium redox. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Shabdin, Nur Izzati and Ya'acob, Suraya and Sjarif, Nilam Nur Amir (2020) Relationship types in visual analytics. In: 6th International Conference on Computer and Technology Applications, ICCTA 2020, 14 April 2020 - 16 April 2020, Antalya, Turkey.

Shaekh Mohammad Shithil, Shaekh Mohammad Shithil and Mohd. Faudzi, Ahmad Athif and Abdullah, Afnizanfaizal and Islam, Najmul and Mad Saad, Shahril (2022) Robust sensor fusion for autonomous UAV navigation in GPS denied forest environment. In: 5th IEEE International Symposium in Robotics and Manufacturing Automation, ROMA 2022, 6 - 8 August 02021, Malacca, Malaysia.

Shafie, Nurul Shahiera and Zaini, Nabilah and Ali, Nurul Farahanim (2020) Gold extraction via cyanide leaching using alkaline-based empty fruit bunch activated carbon. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Shafiea, Noraimi and Adam, Mohamad Zulkefli and Abas, Hafiza and Azizan, Azizul (2020) Sequential classification for articulation and Co-articulation classes of Al-Quran syllables pronunciations based on GMM-MLLR. In: 2nd International Conference on Technology, Engineering and Sciences, ICTES 2021, 3 - 4 April 2021, Langkawi, Virtual.

Sham, Nur Izzati J. and Mohammed Amin, Muhamad Kamal (2020) Tracking entrepreneurial mind among university students through Functional Near-Infrared Spectroscopy (fNIRS) technology. In: 1st International Conference on Smart Information and Communication Technologies, SmartICT 2019, 26 - 28September 2019, Berkane, Morocco.

Sham, R. and Hussein, M. Z. S. M. and Ismail, H. N. and Latif, A. A. and Mohamed, S. and Othman, R. and Yatim, N. H. M. (2013) An improved travel safety for urban commuters using an itracks system. In: Proceedings - 2013 IEEE 3rd International Conference on System Engineering and Technology, ICSET 2013.

Shamsuddin, Rozita and Mohd. Mahdzir, Akbariah (2015) A proposal for an integrated marketing framework for emerging high technologies. In: Malaysia-Japan Joint International Conference 2015 (MJJIC2015), 13-15 Nov, 2015, Japan.

Shamsuddin, Shuhana and Zaini, Khazainun (2013) The influence of the surveillance factors towards the residents' perceptions on safety at the shared outdoor spaces in gated community. In: 2nd Global Conference on Civil, Structural and Environmental Engineering, GCCSEE 2013, 28-29 Sept, 2013, Shenzhen, China.

Shamsuddin, Siti Mariyam and Sjarif, Nilam Nur Amir and Yuhaniz, Siti Sophiayati and Mohd. Hashim, Siti Zaiton (2011) Crowd analysis and its applications. In: The Second International Conference On Software Engineering And Computer Systems (Icsecs2011).

Shariff, Noor Suryati and Musa, Tajul Ariffin and Ses, Shahrum and Lim, Samsung (2008) Impact of 'Poor' data correction to network-RTK user. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Sharifmuddin, N. B. and Ise, T. and Suwa, T. (2016) Comparative study of series and parallel schemes for stabilization of a microgrid integrated with a solar thermal cogeneration system using virtual synchronous generator control. In: 2016 International Energy and Sustainability Conference, IESC 2016, 30 June 2016 through 1 July 2016, Cologne; Germany.

Sharizan, M. S. M. and Azian, M. N. and Yoshiyuki, Y. and Kamal, A. A. M. and Yunus, M. A. C. (2016) Hot compressed water extraction curve for palm oil and beta carotene concentration. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Sharkawi, K. H. and Ujang, Muhammad Uznir and Abdul Rahman, Alias (2008) 3D navigation system for virtual reality based on 3d game engine. In: 3D Navigation System for Virtual Reality based on 3D Game Engine, 3-11 Jul, 2008, Beijing, China.

Shatar, N. M. and Rahman, M. A. A. and Salim, S. A. Z. S. and Ariff, M. H. M. and Muhtazaruddin, M. N. and Badlisah, A. K. A. (2019) Design of photovoltaic-thermoelectric generator (pv-teg) hybrid system for precision agriculture. In: 7th IEEE International Conference on Power and Energy (PECon), 3-4 Dec 2018, Kuala Lumpur, Malaysia.

Sheng, H. K. and Samy, G. N. and Kamaruddin, N. and Maarop, N. and Hassan, N. H. and Ten, D. W. H. (2019) Factors affecting trust of software as a service usage in public network: a correlation analysis. In: 7th International Conference on Information and Communication Technology, ICoICT 2019, 24-26 July 2019, Kuala Lumpur, Malaysia.

Shilan, S. T. and Mazlan, S. A. and Khairi, M. H. A. and Ubaidillah, Ubaidillah (2016) Properties of plate-like carbonyl iron particle for magnetorheological fluid. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Shubber, Ahmed Hadi and Udin, Amirmudin and Minghat, Asnul Dahar (2015) Designing educational simulation for impact test machine. In: 3Rd International Conference Computational and Social Sciences 2015, 25-27 Aug, 2015, Johor Bahru, Johor.

Shubli, Suwaibah and Mohd. Daud, Salwani and Daruis, Rusni (2011) Internet search engines to filter non-halal content – a review. In: Proceedings of World Congress on Islamic Systems 2011, 28 – 29 Nov 2011.

Siaw, W. C. and Musram Rakunman, M. R. and Kamaruzaman, N. and Tsuji, T. and Abdul Manaf, N. (2020) Metal removal from industrial waste by hydrochloric acid. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Sidek, Faizatul Khadijah and Ahmad, Anuar (2008) Development of mapping procedures using digital imagery derived from unmanned aerial vehicle system. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Siregar, Tirena Bahnur and Saidina Amin, Nor Aishah and Abdul Karim, Siti Kartina (2005) Catalytic conversion of palm oil to gasoline over H-ZSM-5: effect of temperature and hydrotreatment of catalysts. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Siroos Talab, Mahmood Aghajani and Abang Jawawi, Dayang Norhayati (2011) A code generator for component oriented programming framework. In: 2011 IEEE Conference In Open Systems (ICOS 2011), 25-28 Sept, 2011, Langkawi, Malaysia.

Sofian, H. and Ming, J. T. C. and Noor, N. M. (2016) Detection of the lumen boundary in the coronary artery disease. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015, 19-20 Dec 2015, Dhaka, Bangladesh.

Sofian, H. and Muhammad, S. and Ming, J. T. C. and Noor, N. M. (2016) Lumen coronary artery border detection using texture and Chi-square classification. In: 2015 International Conference on Image and Vision Computing New Zealand, IVCNZ 2015, 23 November 2015 through 24 November 2015, New Zealand.

Sofian, H. and Than, J. C. M. and Mohammad, S. and Noor, N. M. (2019) Using deep learning for calculation detection in coronary artery disease intravascular ultrasound image. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 Apr 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Sofian, Hannah and Than, Joel C. M. and Mohd. Noor, Norliza and Mohamad, Suraya (2017) Lumen boundary detection in IVUS medical imaging using structured element. In: 11th International Conference on Ubiquitous Information Management and Communication, IMCOM 2017, 5 - 7 January 2017, Beppu, Japan.

Soom, E. M. and Husain, M. K. A. and Zaki, N. I. M. and Azman, N. U. (2019) Managing risk for damaged offshore structures. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Sophia, S. and Abouzari Lotf, E. and Ahmad, A. and Moozarm Nia, P. and Rasit Ali, R. (2019) Go-modified membranes for vanadium redox flow battery. In: 7th Conference on Emerging Energy and Process Technology, CONCEPT 2018, 27-28 Nov 2018, Thistle Hotel Johor, Malaysia.

Sopian, S. A. and Ambran, S. and Ong, L. P. and Ja'afar, P. N. S. S. and Mohamed, H. and Yusoff, N. M. (2021) Liquid level monitoring with single layered rubber diaphragm fibre Bragg grating sensor. In: 8th International Conference on Electrical Engineering, Computer Science and Informatics, EECSI 2021, 20 - 21 October 2021, Semarang, Virtual.

Su, A. S. B. M. and Ghani, R. B. A. (2016) Simulation of DC to DC converter with embeded snubber circuit maximum power point tracking. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Subbarao, A. and Mahrin, M. N. (2021) Data consolidation in global software development projects: A grounded theory. In: 1st International Recent Trends in Technology, Engineering and Computing Conference, IRTTEC 2020, 30 September 2020, Kuala Lumpur, Virtual.

Subramaniam, M. and Hassan, M. Z. and Sadali, M. F. and Ibrahim, I. and Daud, M. Y. and Aziz, S. A. and Samsudin, N. and Sarip, S. (2019) Evaluation and analysis of noise pollution in the manufacturing industry. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor, Malaysia.

Sudiro, S. and Yusof, S. M. (2016) Measuring production floor performance using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Sudiro, S. and Yusof, S. M. and Revino, Revino (2016) Design simulation and information dashboard for manufacturing control using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kedah, Malaysia.

Sugeng, Dhani Avianto and Mohd. Zahari, Mohamad Fathur Hafeezat and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair (2017) Diesel engine fuel consumption and emission analysis using steam generated non-surfactant water-in-diesel emulsion fuel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang.

Sugiura, Norio and Maseda, Hideaki and Uwata, Maki and Shimizu, Kazuya and Okano, Kunihiro and Utsumi, Motoo and Iwamoto, Koji and Goto, Masafumi and Itayama, Tomoaki (2015) Microcystin degradation in sphingopyxis sp. C-1. In: International Conference on Sustainability Initiatives (ICSI 2015) in conjunction with 8th ASEAN Environmental Engineering Conference (AEEC), 24-25 August, 2015, Kuala Lumpur, Malaysia.

Sukimin, Zuraini and Haron, Habibollah (2008) Geometric entities information for feature extraction of solid model based on DXF file. In: Proceedings - International Symposium on Information Technology 2008, ITSim , 26-28 Aug. 2008 .

Sukimin, Zuraini and Haron, Habibollah (2008) Designing and simulating chopping process using workspace5. In: Second Asia International Conference on Modelling & Simulation, 13-15 May 2008.

Sukri, Mohamad S. N. A. and Shameli, K. and Mohamed Isa, E. D. and Ismail, N. A. (2021) Green synthesis of zinc oxide-based nanomaterials for photocatalytic studies: A mini review. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Sukri, S. N. A. M. and Isa, E. D. M. and Shameli, K. (2020) Photocatalytic degradation of malachite green dye by plant-mediated biosynthesized zinc oxide nanoparticles. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Sulaiman, Yusram and Buang, Nor Aziah and Abd. Majid, Zaiton and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Raman and TEM studies of carbon nanotubes produced by bimetallic catalysts system. In: The XXII Regional Conference on Solid State Science & Technology (RCSST' 05), 18-21 Dec 2005, Kuantan, Pahang.

Sulaiman, Mohd. Suffian and Azmi, Azri (2021) Evaluation of interactive WebSIR using software usability measurement inventory (SUMI). In: 2nd International Conference on Computer Science, Electrical and Electronic Engineering, ICCEE 2020, 17 - 18 August 2020, Virtual, Online.

Sulaiman, Yusran and Tee, Jia Chee and Buang, Nor Aziah and Aziz, Mazlan and Mohd. Sanip, Suhaila and Ismail, Ahmad Fauzi (2004) SEM of as-synthesized nano-carbon using different catalyst (P207). In: The XXI Regional Conference and Workshop on Solid State Science & Technology (2004), 12-13 Oktober 2004, Hyatt Regency Kinabalu, Sabah, Malaysia.

Sumali, B. and Sarkan, H. and Hamada, N. and Mitsukura, Y. (2016) Single image Super Resolution by no-reference image quality index optimization in PCA subspace. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Sundaram, Bhavithra Mohana and Seleman, Nor Sabirrah and Jasmi, Kamarul Azmi (2018) Integrasi Akhlak dalam Pembelajaran Sains. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Supiyah, S. N. and Arsad, Agus (2005) Simulation of glass transition of polystyrene. In: Simposium Polimer Kebangsaan Ke-5, 23-24 August 2005, Hotel Residence, UNITEN.

Surej, K. S. and Samsuri, Ariffin and Z., Zularisam (1997) The effects of mud contamination to wellbore stability. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Syahid, A. and Tareq, M. A. and Zaki, S. A. (2016) Sustainability or bust: Malaysian home buyers' stated preferences for sus-tainable housing. In: 2016 3rd International Conference on Industrial Engineering and Applications, ICIEA 2016, 28 April 2016 through 30 April 2016, Hong Kong.

Syed Othman, Syed Muhammad Nazir and Abdul Rahim, Zulhasni (2022) Construction 4.0 intervention in quality assessment system in construction’s implementation. In: 6th International Conference of Reliable Information and Communication Technology (IRICT 2021), 22 - 23 December 2021, Virtual, Online.

Tabatabaei, Sayed Gholam Hassan and Wan Kadir, Wan Mohd. Nasir and Ibrahim, Suhaimi (2008) A comparative evaluation of state-of-the-art approaches for web service composition. In: Proceedings - The 3rd International Conference on Software Engineering Advances, ICSEA 2008, Includes ENTISY 2008: International Workshop on Enterprise Information Systems, 26-31 Oct. 2008.

Taherdoost, Hamed and Masrom, Maslin and Ismail, Zuraini (2009) Research in progress - evaluation of smart card acceptance : security, technology and usage. In: e-CASE and e-Technology 2009, January 8-10, 2009, Singapore.

Taib, Mohd. Rozainee and Ngo, S. P. (2005) Effect of static bed height on the combustion of rice husk in a fluidized bed combustor. In: 18th International Conference on Fluidized Bed Combustion (FBC2005), May 25-25, 2005, Ontario, Canada.

Takehiro, MORITA and Yoshinori, SAWAE and Fukuda, Kanao (2012) An attempt at analyzing chronological changes of wear particles on pin-on-disk apparatus. In: Proceedings of the Conference of the Japan Society of Mechanical Engineers, 2012.

Talib, D. N. N. and Shafie, S. and Hamidon, M. N. and Ahmad, F. (2016) An improved readout topology of resistive sensor array for reduced measurement error. In: IEEE International Circuits and Systems Symposium, ICSyS 2015, 2 - 4 Sept 2015, Langkawi, Malaysia.

Tamuno-Ibuomi, Lewis Osikibo and Muhammad-Sukki, Firdaus and Ramirez-Iniguez, Roberto and Ardila-Rey, Jorge Alfredo and Abu-Bakar, Siti Hawa and Bani, Nurul Aini and Chan, Hwang See and Faisal, Nadimul Haque and Sellami, Nazmi (2021) Indoor characterisation of a reverse truncated pyramid concentrator. In: 48th IEEE Photovoltaic Specialists Conference, PVSC 2021, 20 - 25 June 2021, Fort Lauderdale, United States.

Tan, Jully and Foo, Dominic Chwan Yee and Kumaresan, Sivakumar and Abdul Aziz, Ramlan (2005) Evaluation of pharmaceutical cream production debottlenecking schemes. In: International Symposium On Design, Operation and Control Of Chemical Processes 2005, 13-15 August 2005, Seoul, Korea.

Tan, Lian See and Tsuji, Tomoya and Krishnan, Alex Daniel (2018) Evaluation of betalain and total phenolic content extracted from beetroot peel via ultrasonic assisted process. In: 5th Malaysia-Japan Joint International Conference (MJJIC 2018).

Tan, Tze Hon and Ooi, Chia Yee and Marsono, M. N. (2022) An FPGA-based IP core subscription-oriented fog computing platform. In: 36th IEEE International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2022, 30 - 3 June 2022, Virtual, Online.

Tan, Lian See and Ahmad, Abdul Latif and Abd. Shukor, Syamsul Rizal (2018) Influence of solutes properties and water matrix on nanofiltration performance for pesticides removal. In: 4th International Conference on Chemical Engineering and Industrial Biotechnology 2018 (ICCEIB 2018).

Tanavarotai, Karn and Anuar, Aznah Nor and Mohd. Aris, Alijah and Lei, Zhongfang and Ab. Halim, Mohd. Hakim (2022) Rapid method of aerobic granular sludge bioreactor start-up for domestic wastewater treatment. In: 9th AUN/SEED-Net Regional Conference on Natural Disaster, RCND 2021, 15 December 2021 - 16 December 2021, Virtual, Online.

Tarmizi, Z. I. and Ali, R. R. and Nasef, M. M. and Akim, A. M. and Eshak, Z. and Noor, S. M. (2020) Fabrication and characterization of PU-g-poly(HEMA) film for clotting time and platelet adhesion. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Tarmizi, Z. I. and Arifin, N. I. and Rasit Ali, R. and Shameli, K. and Zhe, J. C. and Salleh, M. S. N. (2021) Preparation and characterization of polysaccharide mediated copper nanoparticle: The effect of time-varying exposure. In: 5th International Conference on Advanced Technology and Applied Sciences 2020 ICATAS 2020 in conjunction with the 6th Malaysia-Japan Joint International Conference 2020 MJJIC 2020 (ICATAS-MJJIC 2020), 7 - 9 October 2021, Kuala Lumpur, Malaysia.

Te, Shu Harn and Mohamed, Maketab (2003) Measurement of longitudinal dispersion in streams and its application using a water quality model. In: Seminar Kebangsaan Pengurusan Persekitaran 2003, 8-9 Julai 2003, Universiti Kebangsaan Malaysia, Bangi, Selangor. (Submitted)

Tee, J. C. and Aziz, M. and Ismail, Ahmad Fauzi (2007) Effects of catalyst preparation on multi-walled carbon nanotubes growth. In: The 23rd Regional Conference On Solid State Science and Technology 2007, 27-29 November 2007, Hyatt Regency Hotel, Johor Bahru, Malaysia.

Tee, Jia Chee and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2007) Template synthesis of carbon nanotubules. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May- 1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Tengah, Z. and Ali, M. T. and Rahman, N. H. A. and Pasya, I. and Hamid, S. A. and Baba, N. H. and Yamada, Y. (2016) Design of serial feeds for a bifurcated beam of bend-array configuration. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Tengku Paris, Tengku Nazatul Shima and Abdul Manap, Nurma and Abas, Hafiza and Mun Ling, Lo (2021) Exploring learners’ acceptance and attitude towards Mobile Assisted Language Learning (MALL). In: AMER International Conference on Quality of Life, 17 - 18 Mar 2021, Colmar Tropicale, Bukit Tinggi, Malaysia.

Teo, Hui Ming and Wan Kadir, Wan M. N. (2006) A comparative study of interface design approaches for service-oriented software. In: XIII Asia Pacific Sotware Engineering Conference (APSEC'06), 6-8 Dec. 2006.

Thirugnana, Sathiabama T. and Ahmad, Nurul Huda (2018) Stem education initiatives by Universiti Teknologi Malaysia and national stem movement. In: First National Seminar on SETM Mentor Mentee.

Thiyagarajan, Sumita and M. Amin, Muhamad Kamal (2020) Exploring eye-gaze behaviors on emotional states for human-computer interaction (HCI) using eye tracking technique. In: 1st International Conference on SmartInformation and Communication Technologies, Smart ICT 2019, 26 - 28 September 2019, Berkane, Morocco.

Timan, Hazila and Kama, Nazri and Che Mohd. Yusoff, Rasimah and Ali, Mazlan (2021) The application of medical and health informatics among the Malaysian medical tourism hospital: A preliminary study. In: International Conference on Computer, Communication and Computational Sciences, IC4S 2019, 11 - 12 October 2019, Bangkok, Thailand.

Toh, M. Zulfahmi and Sahibuddin, Shamsul and Abu Bakar, Rohani (2021) A review on DevOps adoption in continuous delivery process. In: 7th International Conference on Software Engineering and Computer Systems and 4th International Conference on Computational Science and Information Management, ICSECS-ICOCSIM 2021, 24 - 26 August 2021, Virtual, Pekan.

Toh, M. Zulfahmi and Sahibuddin, Shamsul and Mahrin, Mohd. Naz’ri (2019) Adoption issues in DevOps from the perspective of continuous delivery pipeline. In: 8th International Conference on Software and Computer Applications, ICSCA 2019, 19 - 21 February 2019, Penang, Malaysia.

Tong, Q. W. and Abas, H. B. and Yang, D. and Yusoff, R. C. M. (2021) Research on citizen participation of public information service platform amidst the COVID-19 outbreak in China. In: 3rd International Conference on Applied and Practical Sciences, ICAPS 2021, 18 - 19 February 2021, Kuala Lumpur, Malaysia.

Triwahyono, Sugeng and Abdul Jalil, Aishah and Shamsuddin, Mustaffa and Hamdan, Halimaton (2005) The effect of sulfate ion on the hydrogen adsorption over Pt/sulfate-ZrO2 catalyst. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Triwahyono, Sugeng and Abdul Jalil, Aishah (2007) Effect of Na loading on the properties of catalysts and n-heptane isomerization over Pt/sulfate -ZrO2 catalyst. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Sciences (ICoMS 2007), May 28-29, 2007, Ibnu Sina Institute, UTM.

Triwahyono, Sugeng and Abdul Jalil, Aishah and Shamsuddin, Mustaffa and Hamdan, Halimaton (2005) Isomerization of cyclohexane to methylcyclopentane over Pt/sulfate-ZrO2 catalyst. In: 2nd International Conference on Chemical and Bioprocess Engineering in, 8-10 December 2005, Kota Kinabalu, Sabah.

Tsuji, Tomoya (2018) Phase equlibria containing acidic compounds from. In: The Society Of Chemical Engineers In Japan (SCEJ) 83rd Annual Meeting.

Tsuji, Tomoya (2018) Report on 17th congress of Asia pacific confederation of chemical engineering (APCCHE 2017). In: Newsletter of Division of Physical Properties, the Society of Chemical Engineers, Japan.

Tsuji, Tomoya and Hiaki, Toshihiko and Fijita, Kento and Okada, Maksaki and Hishia, Taka-Aki and Yamada, Hidetaka (2018) Solution properties of aqueous solution of piperazine before / after co2 loading at 313 k. In: The Society Of Separation Process Engineering, Japan.

Tsuji, Tomoya and Hiaki, Toshihiko and Hidetaka, Yamada and Okada, Masaki and Fujita, Kento and Hoshina, Taka-Aki (2018) CO2 absorption effect on physical properties for butylethanolamine aqueous solution at 313 k. In: The Society Of Chemical Engineers In Japan (SCEJ) 83rd Annual Meeting.

Tsuji, Tomoya and Hiaki, Toshihiko and Nakazawa, Misaki and Hishia, Taka-Aki (2018) Measurement and correlation of bubble point pressure for dimethyl ether + acetone + 1-hexanol. In: Annual Meeting 2018, The Society Of Separation Process Engineering, Japan.

Tsuji, Tomoya and Hughes, Tom and Al Ghafri, Saif and Rowland, Darren and Saeed, Amina and Tanaka, Yukio and May, Eric and Seiki, Yoshio and Mylona, Sofia and Akhfash, Masoumeh (2018) Thermal conductivities and viscosities of binary mixtures containing hydrofluorocarbons and hydrofluorolefins: measurement and modelling. In: Twentienth Symposium on Thermophysical Properties. (In Press)

Tsuji, Tomoya and Koshiba, Yusuke and Hiaki, Toshihiko and Hoshia, Taka-Aki and Okada, Maksaki (2018) Dielectric properties of liquefied propane + alcohol mixtures at 303.2 k. In: The 8th International Symposium on Molecular Thermodynamics and Molecular Simulation (MTMS18).

Tsuji, Tomoya and Koshiba, Yusuke and Hiaki, Toshihiko and Hoshia, Taka-Aki and Okada, Maksaki (2018) Reorientational dynamics and liquid structure in liquefied propane-alcohol mixture. In: The 8th International Symposium on Molecular Thermodynamics and Molecular Simulation (MTMS18).

Tsuji, Tomoya and Lim, Ki Min and Otake, Katsuto and Oba, Shigeo and Tan, Lian See and Shinozuka, Ryoichi and Hishia, Taka-Aki (2018) SO2 solubility in low molecular weight polyethylene glycol dimethyl ether and correlation by using cubic equation of state. In: The International Symposium on Solubility Phenomena and Related Equilibrium Processes (ISSP18).

Tsuji, Tomoya and Oba, Shigeo and Abdul Manaf, Norhuda and Matsuda, Keigo (2018) Modeling and optimization of extractive distillation for ethanol dehydration using ethylene glycol. In: International Conference On Empirical Economics & Social Sciences (ICEESS 2018).

Tsuji, Tomoya and Rowland, Darren and Niya, Arash Arami and Tanaka, Yukio and Xiong, Xiao and Khamphasith, Martin and Seiki, Yoshio and Hughes, Thomas J. and May, Eric and Akhfash, Masoumeh and Al Ghafri, Saif (2018) Thermodynamic properties of binary mixtures containing of hydrofluorocarbons and hydrofluorolefins: new data and modelling. In: Twentienth Symposium On Thermophysical.

Tsuji, Tomoya and Shimada, Y. and Otake, Katsuto and Naya, Masakazu and Shono, Atsushi and Shinozuka, Ryoichi (2018) The measurement and correlation of solubility of SO2 in. In: 20th The Society Of Chemical Engineers, Japan (SCEJ) Students Meeting In Tokyo.

Tsuji, Tomoya and Tochigi, Katsumi and Hoshina, Taka-Aki and Kurihara, Kiyofumi and Hiroyuki, Matsuda (2018) Correlation and prediction of dielectric constants for binary and ternary systems using activity coefficient equations. In: The Society Of Chemical Engineers In Japan (SCEJ) 83rd Annual Meeting.

Tsuji, Tomoya and Nakazawa, Misaki and Hiaki, Toshihiko and Hoshina, Taka-Aki (2018) Measurement of bubble point pressure for dimethyl ether + 1-. In: 20th The Society Of Chemical Engineers, Japan (SCEJ) Students Meeting In Tokyo.

Tuan, N. T. and Yamada, Y. and Dinh, N. Q. and Michishita, N. (2016) Self-resonant structures of normal-mode helical antennas embedded in dielectric and magnetic materials. In: 8th International Conference on Advanced Technologies for Communications, ATC 2015, 14 - 16 Okt 2015, Vietnam.

Tung, Hao Kean and Che Sidik, Nor Azwadi and Kaur, Jesbains (2020) Numerical investigation on melting of Phase Change Material (PCM) dispersed with various nanoparticles inside a square enclosure. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 - 31 October 2018, Pekan, Pahang.

Tung, Tan Chen and Khairuddin, Uswah and Shapiai, Mohd. Ibrahim and Md. Nor, Norhariani and Hiew, Mark Wen Han and Mohd. Suhaimie, Nurul Aisyah (2022) Livestock posture recognition using deep learning. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Ubaidillah, Ubaidillah and Harjana, Harjana and Yahya, I. and Kristiani, R. and Muqowi, E. and Mazlan, S. A. (2016) Perfect sound insulation property of reclaimed waste tire rubber. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Ubaidillah, Ubaidillah and Pamungkas, K. and Nizam, M. and Mazlan, S.A. (2016) Simulation and model verification of a vehicle handling dynamics. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Indonesia.

Ubaidillah, Ubaidillah and Permata, A. N. S. and Wibowo, A. and Budiana, E. P. and Yahya, I. and Mazlan, S. A. (2016) Magnetostatic simulation on a novel design of axially multi-coiled magnetorheological brakes. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Ubaidillah, Ubaidillah and Raharjo, W. W. and Wibowo, A. and Harjana, H. and Mazlan, S. A. (2016) Influence of additional coupling agent on the mechanical properties of polyester-Agave cantala roxb based composites. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Ubaidillah, Ubaidillah and Wibowo, A. and Adiputra, D. and Tjahjana, D. D. D. P. and Rahman, M. A. A. and Mazlan, S. A. (2017) Performance prediction of serpentine type compact magnetorheological brake prototype. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

Ubaidillah, Ubaidillah and Yunus, N. A. and Aziz, S. A. A. and Wahab, N. A. A. and Mazlan, S. A. (2017) Rheological properties of a reclaimed waste tire rubber through high-pressure high-temperature sintering. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

Udin, Wani Sofia and Ahmad, Anuar and Wan Mohd. Akib, Wan Abdul Aziz and Tahar, Khairul Nizam (2011) Close range photogrammetric digital technique for mapping meandering flume using metric digital camera. In: 10th International Symposium And Exhibition On Geoinformation.

Ujang, Muhammad Uznir and Abdul Rahman, Alias (2007) Incorporating 3d game engine for 3d network analysis. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on GPS/GNSS 2007, 5-7 Nov, 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Ujang, Muhammad Uznir and Sharkawi, K. H. and Abdul Rahman, Alias (2008) Spatial network analysis for navigation system based on 3D game engine. In: International Symposium On Geoinformation 2008 (ISG 2008), 3-15 Oct, 2008, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Ujang, Zaini (1997) Separation mechanism of mono- and divalent ions by low pressure reverse osmosis membrane. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Usman, S. and Bani, N. A. and Kaidi, H. M. and Aris, S. A. M. and Jalil, S. Z. A. and Muhtazaruddin, M. N. (2019) Second derivative and contour analysis of PPG for diabetic patients. In: 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2018, 3-6 Dec 2018, Borneo Convention Centre KuchingDemak-Isthmus Bridge, Jalan Keruing, Sejingkat, Kuching, Malaysia.

Usman, Sahnius and Harun, Norhaslinda and Dziyauddin, Rudzidatul Akmam and Bani, Nurul Aini (2018) Estimation of HbA1c level among diabetic patients using second derivative of photoplethysmography. In: 15th IEEE Student Conference on Research and Development, SCOReD 2017, 13 December 2017- 14 December 2017, Putrajaya, Malaysia.

Usman, Sahnius and Rusli, Fatin ‘Aliah and A. Jalil, Siti Zura and Bani, Nurul Aini (2022) Depression anxiety stress scale and handgrip using machine learning analysis. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 - 28 July 2022, Kuala Lumpur, Malaysia.

Usman, Sahnius and Rusli, Fatin ‘Aliah and Mohd. Noor, Norliza and Mohd. Aris, Siti Armiza and Muhtazaruddin, Mohd. Nabil and Syed Abd. Rahman, Sharifah Alwiah and Bani, Nurul Aini (2021) Association of hand grip and pinch strength reading with nutritional health status among Orang Asli in Perak, Malaysia. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 - 10 November 2021, Virtual, Online.

Usop, Mohd. Fais and Ishak, Ruzana and Hamdan, Ahmad Ridhuan (2017) Periodic inventory system in cafeteria using linear programming. In: 13th IMT-GT International Conference on Mathematics, Statistics and their Applications, ICMSA 2017, 4 - 7 December 2017, Kedah, Malaysia.

Valachamy, Mageshwari and Sahibuddin, Shamsul and Ahmad, Nur Azurati and Abu Bakar, Nur Azaliah (2022) Critical success factors for geospatial data sharing in disaster management. In: 11th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2022, 7 March 2022 - 9 March 2022, Virtual, Online.

Vijiyan, Gayatri and Ibrahim, Roslina (2015) Software engineering research: a review of its paradigm. In: The 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Vijiyan, Gayatri and Ibrahim, Roslina (2015) Software engineering research: a review of its paradigms. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Wahab, A. M. and Rasid, Z. A. and Abu, A. (2017) Parametric instability of static shafts-disk system using finite element method. In: 2017 5th Asia Conference on Mechanical and Materials Engineering, ACMME 2017, 9 - 11 June 2017, Tokyo, Japan.

Wahab, Muhammad Faiz and Aung, Lwin Moe and Abd. Aziz, Ahmad Aizuddin and Mohamad@Yusof, Asri (2015) Investigation of mirror-like surface finish in optical glass (BK7) lapping. In: Malaysia-Japan Joint International Conference 2015 (MJJIC2015), 13-15 Nov, 2015, Japan.

Wahab, N. A. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Sharif, A. H. R. and Kamaruddin, S. (2016) Steady compression characteristics of laminated MRE isolator. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Wan Abdul Rahman, Wan Aizan and A. R., Mahmud Iskandar Seth and Y., Muhamad Zaini and R. A., Roshafima (2007) Effect of starch on tissue waste/high density polyethylene/starch biocomposite for thermoforming process. In: VIIth National Symposium On Polymeric Materials 2007, November 27-28, 2007, Universiti Kuala Lumpur.

Wan Abdul Rahman, Wan Aizan and Rasit Ali, Roshafima and Wan Hasan, Wan Hasamuddin and Muhammad Tajudin, Izzati Nazreen (2007) Biocomposites based on oil palm tree as packaging materials. In: 7th National Conference on Oil Palm Tree Utilisation, 13-15 November 2007, Sunway Resort Hotel & Spa, Bandar Sunway, Petaling Jaya.

Wan Abdul Rahman, Wan Aizan and Hashim, Shahrir and Toh, Show Chong and Nadarajah, Nadarajah (2002) Enviromental stress crack resistance (ESCR) analysis of blow moulded high density polyethylene (HDPE) containers exposed to surface active agents (PANOX 19). In: 11th Scientific Conference & 12th Annual General Meeting of The Electron Microscopy Society of Malaysia 2002, 17-18 December 2002, The Eden Garden Hotel, Johor Bahru, Johor. (Unpublished)

Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2007) Water pinch analysis evolution towards a holistic management of water resources. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia.

Wan Aris, Wan Anom and Musa, T. A. and Othman, R. (2011) The performance of Iskandarnet DGPS service. In: 10th International Symposium And Exhibition On Geoinformation.

Wan Kadir, Wan Mohd. Nasir (2011) A qos-aware algorithm for web service selection. In: 3rd Software Engineering Postgraduates Workshop Co-Located Workshop In The 5th Malaysian Software Engineering Conference (SEPOW 2011).

Wan Khairuddin, Wan Norshuhada and Rambat, Shuib and Harun, Aizul Nahar (2022) Community based index of coastal erosion using AHP analysis. In: 9th AUN/SEED-Net Regional Conference on Natural Disaster, RCND 2021, 15 December 2021 - 16 December 2021, Virtual, Online.

Wan Mansor, Wan Nur Aaisyah and Ahmad, Azuan and Zainudin, Wan Shafiuddin and Mohd. Saudi, Madihah and Kama, Mohd. Nazri (2020) Crytojacking classification based on machine learning algorithm. In: 8th International Conference on Communications and Broadband Networking, ICCBN 2020 and its Workshop on 2020 3rd International Conference on Communication Engineering and Technology, ICCET 2020, 15 April 2020 - 18 April 2020, Auckland, New Zealand.

Wan Mohd. Akib, Wan Abdul Aziz and Nordin, Zuhaidah and Mat Amin, Zulkarnaini and Yahya, Mohd. Hafiz and Shu, Kian Kok (2008) The current and future trends on structural health monitoring scheme in Malaysia. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (ENCON 2008), 18-19 December 2008, Crown Plaza Riverside, Kuching, Sarawak, Malaysia.

Wan Zakaria, Wan Normeza and Md. Haled, Muhammad Faiz (2018) Safety awareness and practices among xyzsb workers towards occupational safety and health. In: 2nd Master Project Symposium.

Waqar, Dania Maryam and Gunawan, Teddy Surya and Kartiwi, Mira and Ahmad, Robiah (2021) Real-time voice-controlled game interaction using convolutional neural networks. In: 7th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, 23 - 25 August 2021, Virtual, Bandung.

Weng, D. L. K. and Rahmat, Abdul Razak (2005) Mechanical properties of short pineapple leaf fibre reinforced polypropylene composite. In: Simposium Polimer Kebangsaan Ke-5, 23-24 August 2005, Residence Hotel, UNITEN.

Wirabhuana, Arya and Haron, Habibollah and Imtihan, Muhammad Rofi (2008) Simulation and re-engineering of truck assembly line. In: Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008 , 13-15 May 2008 .

Wong, Lorna and Ismail, Ahmad Fauzi (2000) Penetrant-induced plasticization in glassy polymer membranes for gas separation. In: Malaysian Science & Technology Congress (MSTC) 2000, 7-9 November 2000, Genting Highlands.

Wong, Kin Fatt and Ahmad, Robiah and Kadir, Kushsairy and Ahmad, Norulhusna (2021) Best-fit mathematical operator for power equation of solar photovoltaic module. In: 7th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, 23 August 2021 - 25 August 2021, Virtual, Bandung.

Yaacob, Muhammad Nor Hafiz and Zuhud, Daeng Ahmad Zuhri and Magalingam, Pritheega and Maarop, Norazean and Samy, Ganthan Narayana and Shanmugam, Mohana (2020) Identifying the Klang Valley rail riders' travel pattern for future expansion using social network analysis. In: 2020 8th International Conference On Information Technology And Multimedia (ICIMU), 24 August 2020, Selangor, Malaysia.

Yaacob, Y. and Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. (2016) Optical coupling for multi-layered optical printed wiring board using micro lens array. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Yahya, Mohd. Hafiz and Kamaruddin, Md. Nor (2008) Analysis on the residuals in GPS measurement due to tropospheric effect at the equatorial region. In: International Conference on Civil Engineering (ICCE 2008), 12-14 May 2008, Kuantan, Pahang.

Yahya, Mohd. Hafiz and Kamaruddin, Md. Nor (2008) The influnce of different processing parameters on estimated variation of GPS positioning. In: International Symposium on Geoinformation (ISG 2008), 13-15 Oct 2008, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Yahya, Mohd. Hafiz and Kamaruddin, Md. Nor (2008) The performance of GPS baseline solution during northeast monsoon season in Malaysia. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (ENCON 2008), 18-19 Dec 2008, Crown Plaza Riverside, Kuching, Sarawak, Malaysia.

Yahya, Mohd. Hafiz and Kamarudin, Md. Nor and Lim, Samsung and Rizos, Chris (2008) Atmospheric remote sensing using space-based radio navigation satelities. In: International Conference On Environment (ICENV 2008), 15-17 Dec 2008, G Hotel, Penang, Malaysia.

Yahya, Mohd. Hafiz and Nordin, Zuraidah and Kamaruddin, Md. Nor (2008) The potential of continuous operating network of space-based radio navigation satellites for weather information retrieval. In: International Conference and Expo on Environmental Management and Technologies (ICEEMAT 2008), 10-12 Dec 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Yahya, Y. and Rahim, N. Z. A. and Ibrahim, R. and Azmi, N. F. and Sjarif, N. N. A. and Sarkan, H. M. (2019) Between habit and addiction: an overview of preliminary finding on social networking sites usage among teenagers. In: 5th International Conference on Computer and Technology Applications, ICCTA 2019, 16-17 Apr 2019, Istanbul, Turkey.

Yanagida, Naoto and Horisawa, Hideyuki (2015) Al-water fed chemically augmented DC arcjet characteristics. In: 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and exhibit 2014, 28 - 30 July 2014, Cleveland, Ohio.

Yanagida, Naoto and Ohata, Makoto and Horisawa, Hideyuki and Kobayashi, Akira (2015) An Al - water fed DC arcjet. In: Advances in Applied Plasma Science, 31 Aug-4 Sept, 2015, Japan.

Yap, Wei Ney and Abdul Rahman, Badarulhisam and Abdul Aziz, Azila (2005) Baculovirus infection reduced UDP-galactose level in spodoptera frugiperda insect cells. In: 15th MSMBB Annual Scientific Meeting, 4-5 April 2005, Kuala Lumpur.

Yeou, Lim Jiann and Ismail, Zuhaila and Shafie, Sharidan and Fitt, Alistair D. (2015) Numerical computational of fluid flow through a sclera buckling. In: Simposium Kebangsaan Sains Matematik ke-23, 24-26 Nov,2015, Johor Bahru, johor.

Yong, Wai Yan and Abdul Rahim, Sharul Kamal and Seman, F. C. and Ramli, Muhammad Nazrin and Remli, N. A. (2018) Miniaturisation of ring shape element frequency selective surface for X-band shielding. In: 2017 IEEE Asia Pacific Microwave Conference, APMC 2017, 13 November 2017 through 16 November 2017, Renaissance Kuala Lumpur Hotel Kuala Lumpur, Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Growth of well-oriented VACNTs using thermal chemical vapor deposition method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Selective aspect ratio of CNTs based on annealing temperature by TCVD method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, IC-NET 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Miyake, M. and Ikeda, S. (2016) Simulation of CNT-AFM tip based on finite element analysis for targeted probe of the biological cell. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Controlling of deposition time as an effective parameter on purified growth CNTs based on TCVD method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, IC-NET 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Yunus, N. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Aziz, S. A. A. and Khairi, M. H. A. and Wahab, N. A. A. and Shilan, S. T. (2016) Investigation on magnetic field dependent modulus of epoxidized natural rubber based magnetorheological elastomer. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Yusof, Rubiyah and Awang, Suryanti (2011) Fusion of face and signature at the feature level by using correlation pattern recognition. In: International Conference On Electrical And Computer Engineering (ICECE 2011).

Yusof, S. M. and Aoki, K. (2016) Proposed lean sustained factors. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 - 10 Mac 2016, Kuala Lumpur, Malaysia.

Yusof, Y. M. and Islam, A. K. M. M. and Baharun, S. (2016) An experimental study of WSN transmission power optimisation using MICAz motes. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Yusof, Yuhani and Sarmin, Nor Haniza and Wan, Heng Fong and Goode, T. Elizabeth and Ahmad, Muhammad Azrin (2013) An analysis of four variants of splicing system. In: Simposium Kebangsaan Sains Matematik Ke-20 (SKSM20), 2013, Johor Bahru, Malaysia.

Yusof, Z. and Rasid, Z. A. (2016) Numerical modelling of parametric instability problem for composite plate using finite element method. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Yusoff, H. H. M. and Razak, K. A. and Yuen, F. and Harun, A. and Talib, J. and Mohamad, Z. and Ramli, Z. and Razab, R. A. (2016) Mapping of post-event earthquake induced landslides in Sg. Mesilou using LiDAR. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Yusop, Zulkifli and Katimon, A. and Chan, C. H. (2007) Runoff characteristics and application of HEC-HMS for modelling stormflow hydro graph in an oil palm catchment. In: IWA International Conference on Water Management and Technology Application in Developing Countries, 14-15 May 2007.

Yusri, N. A. and Idrus, S. M. and Mohamed, N. and Ambran, S. and Iqbal, F. and Kanno, A. and Shibagaki, N. and Kashima, K. and Kawanishi, T. (2021) Calibration of 93.1GHz FOD detection radar on airport runway using trihedral corner reflector. In: 8th International Conference on Electrical Engineering, Computer Science and Informatics, EECSI 2021, 20 - 21 October 2021, Semarang, Virtual.

Zaidan, Husain and Ahmad, Robiah and Mohd. Ghazali, Normah (2015) Optimization of multilayer micro channels heat sinks cooling system using genetic algorithm. In: 2015 International Conference on Smart Sensors and Application (ICSSA), 26-28 May, 2015, Kuala Lumpur, Malaysia.

Zailan, Nur Athirah and Mohd. Khairuddin, Anis Salwa and Khairuddin, Uswah and Taguchi, Akira (2021) YOLO-based network fusion for riverine floating debris monitoring system. In: 3rd International Conference on Electrical, Communication and Computer Engineering, ICECCE 2021, 12 - 13 June 2021, Kuala Lumpur, Malaysia.

Zain, N. N. A. A. N. and Jasni, N. A. H. and Nawawi, W. M. F. W. and Ahmad, F. (2021) Copper-based 3D printer filament as passive Q-switcher. In: 4th Photonics Meeting 2021, PM 2021, 15 - 16 September 2021, Terengganu, Virtual.

Zainal Abidin, Mohamad Hafizat and Suchaad, Saravid and Yee, Ooi Chia and Ismail, Nordinah and Abu, Mohd. Azlan (2022) Scalable off-chain blockchain for vehicular network. In: 1st International Conference on Information System and Information Technology, ICISIT 2022, 27 - 28 July 2022, Virtual, Online.

Zaine, Muhammad Zakwan and Mustafa, Mohd. Faris and Ibrahim, Kamarul Asri and Ibrahim, Norazana and Abd. Hamid, Mohd. Kamaruddin (2015) Sustainable energy efficient distillation columns sequence design of aromatic separation unit. In: The 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr, 2015, Kuala Lumpur, Malaysia.

Zainuddin, Khairulazhar and Setan, Halim and Majid, Zulkepli (2008) 3D measurement & modelling using close range laser scanner for reverse engineering application. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Zainun, Noor Yasmin (2003) Evaluation on various forecasting model using Artificial Neural Network (ANN). In: International Conference On Innovation In Architecture, Engineering And Construction, 2003.

Zainun, Noor Yasmin (2003) Forecasting demand on low cost housing in urban area in Malaysia Artificial Neural Network (ANN) approach. In: East Asia-Pacific Conference on Structural Engineering & Construction, 2003, Hong Kong.

Zakaria, Zainal and Mustafa, Azeman (2005) Investigation of temperature profile for liquefied petroleum gas storage operations. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Zakaria, Zainal and Tee, S. Y. (2005) The prediction of vapour liquid equilibrium behaviour of propane butane mixture. In: Malaysian Science and Technology Congress (MSTC 2005), 18-20 April 2005, CitiTel Hotel Mid Valley, Kuala Lumpur.

Zakaria, Afiqah Zahirah and Selamat, Ali and Fujita, Hamido and Krejcar, Ondrej (2021) The most potential decision tree technique to classify the large dataset of students. In: 7th International Conference on Computational Science and Technology, ICCST 2020, 29 - 30 August 2020, Pattaya, Thailand.

Zakaria, M. A. and Zamzuri, H. and Mazlan, S. A. (2016) Dynamic curvature steering control for autonomous vehicle: performance analysis. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Zakaria, Zukarnain (2018) Developing the grading instrument for the super regional shopping centres in Malaysia. In: 14th NAPREC Conference.

Zaki, N. I. M. and Husain, M. K. A. and Shuhaimy, N. A. and Najafian, G. (2016) The effect of different methods of simulating water particle kinematics on the 100-year responses. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19 - 24 June 2016, Busan, South Korea.

Zaki, Nurul Asyikin and Mohamad Darwi, Lizawati and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of drying parameters on moisture content and papain enzyme activity of dried papaya. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Zamli, Kamal Zuhairi and Shamsuddin, Nurul Afiqah and Sulaiman, Shahida and Syed-Mohamad, Sharifah Mashita (2011) Improving learnability and understandability of a Web application using an action-based technique. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Zareei, M. and Islam, A. K. M. M. and Mansoor, N. and Baharun, S. (2016) Dynamic spectrum allocation for cognitive radio ad hoc network. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Zubair, N. A. and Abouzari-Lotf, E. and Nasef, M. N. and Abdullah, E. C. (2019) Aerogel-based materials for adsorbent applications in material domains. In: 7th Conference on Emerging Energy and Process Technology, CONCEPT 2018, 27-28 Nov 2018, Johor, Malaysia.

Zubair, N. A. and Nasef, M. M. and Ting, T. M. and Abdullah, E. C. and Ahmad, A. (2020) Radiation induced graft copolymerization of amine-containing monomer onto polyethylene coated propylene for CO2 adsorption. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Zubairi, Saiful Irwan and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2005) Standardization of the bio-active compounds (rotenoids) from the extract of local plant species (derris elliptica) using the internal standard method of high performance liquid chromatography (HPLC). In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Zubairi, Saiful Irwan and Ramli, M. K. A. and Abdul Majid, Fadzilah Adibah and Sarmidi, Mohd. Roji and Abdul Aziz, Ramlan (2005) Biological screening on the extract of Derris elliptica (TUBA). In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Zularisam, A. W. and Ismail, Ahmad Fauzi and Salim, M. R. (2005) Influence of natural organic matter (NOM) characteristics on membrane rejection mechanisms of submerged ultrafiltration membrane reactor. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Zularisam, A. W. and Ismail, Ahmad Fauzi and Salim, M. R. and A. M., Mimi Sakinah (2007) Natural organic matter (NOM) fouling and associated foulant in surface water treatment. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia.

Zularisam, A. W. and Ismail, Ahmad Fauzi and Salim, M. R. and A. M., Mimi Sakinah (2007) Understanding of fouling in low pressure UF membrane filtration by natural organic matter (NOM): a perspective of Ulu Pontian river and Bekok Dam water. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia.

Zulkifli, M. A. R. and Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Jaafar, A. B. and Mukhlas, N. A. and Syed Ahmad, S. Z. A. and Mat Soom, E. and Azman, N. U. (2022) Environmental impacts of utilization of ageing fixed offshore platform for ocean thermal energy conversion. In: 9th Conference on Emerging Energy and Process Technology 2021, CONCEPT 2021, 24 November 2021 - 25 November 2021, Johor Bahru, Johor, Malaysia.

Zulkifli, Nordaliza and Ahmad, Anuar (2008) Comparison of bundle adjustment software for camera calibration in close range photogrammetry. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Zumo, Isa Muhammad and Hashim, Mazlan (2020) Mapping seasonal variations of grazing land above-ground biomass with sentinel 2A satellite data. In: 10th IGRSM International Conference and Exhibition on Geospatial and Remote, IGRSM 2020, 20 October 2020 - 21 October 2020, Kuala Lumpur, Virtual, Malaysia.

Book

Ab. Rasid, Kamaruzaman and Ahmad, Anuar and Mohd. Ariff, Shahidah (1993) Ilmu ukur untuk jurutera. UTM Skudai, Johor.

Abdullah, Hasnan (Translator) (1994) Pengurusan penyelenggaraan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0024-6

Bidin, Noriah (2002) Teknologi laser. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0251-6

Bunday, Brian D. and Ismail, Zuhaimy (1994) Asas pengaturcaraan linear. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0020–3

Hadiwinoto, D.Dwirianti and Salim, M.R. and Ujang, Z. (2004) Environmental biotechnology: advancement in water and wastewater application in the tropics. IWA Publishing. ISBN 9781843395034

Ibrahim, Norkhair (Penterjemah) and Majid, Zulkepli (Penterjemah) (2002) Prinsip sistem maklumat geografi. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0275-3

Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia (2008) Annual report 2007 FKKKSA. FKKKSA Annual Report . Faculty of Chemical & Natural Resources Engineering.

UTM, Jawatankuasa Fakulti Alam Bina (2009) Ahris Yaakup : A tribute to the pioneer of GIS application in Malaysia. Penerbit UTM, Skudai, Johor Bahru. ISBN 978-983-52-0497-5

Thesis

Mafroos, Mahroof Mohamed (2022) Passively q-switched fiber laser employing graphene and carbon nanotubes saturable absorber. Masters thesis, Universiti Teknologi Malaysia.

Nik Zain, Nik Nur Anis Awadah (2022) Metal based passive saturable absorber embedded in chitin host polymer. Masters thesis, Universiti Teknologi Malaysia.

Md. Taib, Noor Syazwanee (2022) Thermal comfort study in malaysian universities airconditioning office rooms with various set-point temperatures. Masters thesis, Universiti Teknologi Malaysia.

Jasni, Nur Afiqah Husna (2021) Graphene based passive q-switcher in erbium doped fiber laser. Masters thesis, Universiti Teknologi Malaysia.

Zaini, Nursyafiqah (2022) Electrical conductivity and rheological properties of magnetorheological plastomer using conductive matrix and graphite for sensor applications. Masters thesis, Universiti Teknologi Malaysia.

A. Razak, Affiz Syam (2012) Preloading and prefabricated vertical drain technique for soft ground improvement in soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aarabi, Majid (2013) An extended framework for implementing of enterprise resource planning for small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Rahman, Rosdi (2002) Mengubahsuai pam omboh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Rasid, Nurul 'Ain (2011) Simulation and analysis of maximum power point tracking (MPPT) algorithms for PV applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abas Azmi, Nur Rashidah (2012) Wireless access network using radio over fiber technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abbas Ahmed, Hana Hassan (2012) Dispersive liquid-liquid microextraction methods for the determination of Triazine herbicides in aqueous samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd Manaf, Siti Norliza (2004) Faktor yang telah mendorong graduan dan Alumni Universiti Teknologi Malaysia Menceburi bidang keusahawanan Teknologi. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Abd Rahman, Mohd Khirulerwan (2010) Performance evaluation measures for adaboost algorithms in face detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Hamid, Nur Amirah (2022) Alzheimer’s disease classification using attention mechanism and global average pooling on a convolutional neural network. Masters thesis, Universiti Teknologi Malaysia.

Abd. Karim, Fatin Fazira (2022) Omega-3 fatty acids and astaxanthin produced by chlorella vulgaris and haematococcus pluvialis cultivated in chicken manure medium. Masters thesis, Universiti Teknologi Malaysia.

Abd. Latif, Anizan (2006) Faktor-faktor pemindahan latihan teknologi maklumat dan hubungannya dengan kemahiran teknologi maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Rahim, Siti Hajar (2015) Formulation of a new filter aids material for fabric filtration system. Masters thesis, Malaysia-Japan International Institute of Technology.

Abd. Rahman, Muhammad Riza (2010) Numerical simulation and wind tunnel measurements of lateral aerodynamic characteristics on simplified automotive model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdalhadi, Ibraik S. (2012) Temporal normalization positioning towards recognition of Arabic character speech using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdllah Sani, Zarifah Sofia (2011) Safety culture on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Air, Irdayati (2005) Kadar ketersediaan tanah untuk pembangunan perumahan di kawasan bandar menurut rancangan tempatan daerah : keberkesanannya dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Aziz, Abdul Hadi (2012) Structure and tribological properties of post-sputtered annealing nickel titanium alloy coatings onto 316l stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Ghapar, Hafizza (2022) Statistical properties of lines distribution for tropical wood recognition system. Masters thesis, Universiti Teknologi Malaysia.

Abdul Halim, Syafrina (2016) Projections of future extreme rainfall events using statistical downscaling in Malaysia. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Abdul Kadir, Khairul Anwar (2022) The effect of dilution oil in the torque performance of magnetorheological grease. Masters thesis, Universiti Teknologi Malaysia.

Abdul Kadir, Mohd. Rashdan (2011) Information technology (IT) in supply chain management : supplier-manufacturer information collaboration system development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Majid @ Zakaria, Zakiah (2007) Perbandingan di antara penghasilan model digital tiga dimensi dan model fizikal bagi craniofacial tisu keras. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Malik, Mirda (2011) Variation in oil and gas construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Malik, Samir Sani (2012) Effect of zinc addition on the properties of magnesium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahm, Nurul Afifah (2008) High performance computing of heat tranfer visualization involving two dimensional boundary value problem for raw rubber material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Rahman, Mohamad Sofiuddin (2012) Pengawalan kos projek pembinaan oleh kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Nur Syafiqah Zahirah and Abang Jawawi, Dayang Norhayati (2018) Test case generation technique for concurrency in activity diagram. Masters thesis, Universiti Teknologi Malaysia.

Abdul Rahman, Shahnurriman (2012) Static voltage stability assessment with continuation power flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdulahad, Bawer Marwan (2013) An exploratory study on Universiti Teknologi Malaysia’s innovation towards commercialization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

AbdulHamid, Mohd. Sufian (2022) Evaluation of stress and resilience quantification among university students using heart rate variability. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Ezzat Chan (2017) Toughness enhancement of zirconia-toughened alumina ceramic composite using multi-phasic additives and microwave heat treatment. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, Nasuha Lee (2014) Operational complexity impact on quality and performance of electrical and electronics industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Abdullah, Nur Faizal (2006) Faktor yang dipertimbangkan sebelum membangunkan harta tanah perumahan dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah Al-Muhandes, Mohammed Ali (2012) Oil fate and slick trajectory prediction for marine oil pollution control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah Sani, Abdul Hadi (2022) Effect of scouring on pile performance of fixed offshore jacket structures in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Abiodun, Folorunso Taliha (2013) Pump scheduling optimization for water supply system using adaptive weighted sum genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abolghasemi, Maryam (2018) Project performance framework for stakeholder of residential construction project. PhD thesis, Universiti Teknologi Malaysia.

Abu Bakar, Aznizam (2006) Mechanical, thermal and processing properties of oil palm empty fruit bunch-filled impact modified unplasticised poly (vinyl chloride) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Bakar, Rabieahtul (2006) High precision global positioning system data processing velocity vector determination for geodynamic application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Adnan, Noorazlina (2009) Flame retardancy and mechanical properties of poegmah compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Aghabababaeyan, Reza (2015) A robust against rotation attack watermarking technique based on wavelet transform. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Ahamad Bahtiar, Rahayu (2004) IT application in commercial education : Developing virtual Tuition Centre. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Aharizad, Nezhla (2011) Multidimensional deformation analysis with linear and non-linear Kalman filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad, Mazatusziha (2006) Mechanical properties of rice husk filled impact modified unplasticised poly(vinyl chloride) composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ahmad, Mohd. Zamani (2006) The application of fuzzy expert system to preliminary development planning of medium size container terminal. PhD thesis, Universiti Teknologi Malaysia, Business Advances Technology Centre.

Ahmad, Nurul Huda (2016) Large eddy simulation of the gust index over a realistic urban area. Masters thesis, Department of International Development Engineering Graduate School of Science and Engineering.

Ahmad Sharif, Noor Fadzliana (2012) Preparation and characterization of epoxidized natural rubber (ENR-50) toughened polyamide 6/ halloysite nanotube composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmadi, Ahmadreza (2012) Optimization of the self-tuning PID type fuzzy logic controller using ICA for the X inverted pendulum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Al-Othman, Ahmed Basel (2011) Segmentation of mri medical image using region growing method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Al Amoodi, Tareq Omar (2012) Rain attenuation time series synthesizer for satellite link in tropical/equatorial region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al-Khafaji, Ali Abdulraheem Alwan (2020) Tamper detection of qur'anic text watermarking scheme based on vowel letters with Kashida using exclusive-or and queueing technique. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Al-Rawi, Mohammed A. Sabri (2022) Conceptual model of consumer acceptance on mobile commerce in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Al-Tabatabaie, Kusay Faisal A. (2013) Local multipoint distribution services architecture based on rain profile extracted from meteorological radar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aladdin, Nur Adilah Liyana (2012) Numerical simulation on three dimensional fluid-structure interaction (FSI) in stenotic artery using adina software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alatas, Idrus Muhamad (2017) Kesan luluhawa terhadap kekuatan ricih syal lempung dalam penentuan parameter kestabilan cerun. PhD thesis, Universiti Teknologi Malaysia.

Ali Ahmed, Bashir Abbas (2012) Time-diversity for sattellite link in tropical/equatorial region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alinaghian, Reza (2008) Information and communications technology (ICT) policy implemention : case study : University of Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Alkhateeb, Aamer Abdulhamid (2021) Intelligent brain tumor detection and classification to assist physician in clinical diagnostic system. Masters thesis, Universiti Teknologi Malaysia.

Allam, Allam Hassan (2012) User experience evaluation: E-Learning @ UTM mobile application case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Amari, Hudabiyah Arshad (2012) Multiphase flow imaging using ultrasonic tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amat, Nor' Ainah (2012) The integration of aerial and close-range photogrammetry for levels of details representation in city modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ameen Alkawaz, Mohammad Hazim (2013) Real-time rendering facial skin colours to enhance realism of virtual human. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Amin, Peshawa Omer (2012) Structural and optical properties of randomly oriented ZnO nanowires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aminu, Mansir (2007) A geographic information system (GIS) and multi-criteria analysis for sustainable tourism planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Andalib, Ramin (2012) Structural performance of palm oil fuel ash-fly ash geopolymer concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anjum Iqbal, Anjum Iqbal (2006) Danger theory metaphor in artificial immune system for system call data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ardani, Mohd. Ibthisham (2012) Heat distribution study on turbocharger turbine volute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arumugam, Sharan Kumar (2022) Adoption of eco-costs per value ratio concept in construction waste management. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Asan, Amran (2008) Safety and health costing by medium and small class contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ashabi, Ardavan (2022) Enhancement of parallel K-means algorithm for clustering big datasets. PhD thesis, Universiti Teknologi Malaysia.

Ashourian Jozdani, Mohammad Hossein (2010) Steady-state and dynamic performance of micro grid on electrical distribution network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Asipita, Salawu Abdulrahman (2012) Performance of Bambusa Arundinacea as green inhibitor for corrosion of steel reinforcement in concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayob, Idarahayu (2017) Factors contributing to drone adoption in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Aziz, Anual (2005) Kajian ke arah merealisasikan jaringan rujukan tegak geodetik baru di negeri Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Azizul, Muhammad Farid (2016) Sense shaping place: interaction of planning actor’s values in social- ecological resilience. PhD thesis, The University of Auckland, Degree of Doctor Of Philosophy (Planning).

Azman, Nurul Uyun (2023) Degradation limit state model for structural reliability screening of ageing fixed offshore platforms. PhD thesis, Universiti Teknologi Malaysia.

Baba, Umar Muktar (2015) Adsorption of carbon dioxide and methane on alkali metal exchanged silicoaluminophosphate zeolite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Babamohammadi, Shervan (2011) Optimization of bioethanol production from oil palm trunk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bade, Abdullah (2003) Pengesanan perlanggaran menggunakan gabungan isipadu penyempadanan berjujukan dalam persekitaran maya interaktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Badrun, Mohd. Zahrullail (2011) Prediction of ultimate bored pile capacity using global strain extensometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bajuri, Muzairiah (2003) Pengurusan fasiliti bagi pelajar kurang upaya di institusi pengajian tinggi awam : kajian kes : Universiti Teknologi Malaysia, Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Bakri, Muhd. Shahril (2001) Accomodating telecenters into cybercafes : a case study in Johor Bahru central municipality. Masters thesis, Universiti Putra Malaysia, Faculty of Education.

Balakrishnan, Santhirakumar (2003) Performance of whisker reinforced ceramic insert during hard turning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bankole, Bello Abdulazeez (2011) Selection of optimum stationary crusher location for a quarry using geographical information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Bejarbaneh, Behnam Yazdani (2012) Shear strength parameters of shale based on triaxial compression test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bejarbaneh, Elham Yazdani (2012) Multi-optimization of PID controller parameters using stochastic search techniques for rotary inverted pendulum system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bhatti, Inamullah (2012) Separation of carbon dioxide from natural gas by emulsion liquid membrane in rotating disc contractor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Boroujeni, Arash Khosravi (2012) Sensorless speed control of permanent magnet synchronous motor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Buchori, Imam (2011) Cost analysis framework for sediment management in reservoir infrastructure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chang, Siaw Hui (2009) Formalisation of partnering as a collaborative procurement method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Ismail, Che Mohd. Arman (2013) Effects of temperature and salinity on adsorption in alkaline-surfactant flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Che Man, Muhammad Afiq (2022) Joint common spatial pattern and short-time fourier transform with attention-based convolutional neural networks for brain computer interface. Masters thesis, Universiti Teknologi Malaysia.

Che Morat, Bashirun (2012) Non-invasive evaluation of hydrogen peroxide concentrations in a drinking bottle by near-infrared spectrometry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Che' Man, Noordini (2006) Penilaian keberkesanan sistem kawalan pembangunan : pengalaman Jabatan Perancang Bandar, Dewan bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Cheraghi, Seyed Ali (2012) Moving object detection using registration for a moving camera platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chermahini, Siavash Hosseinpour (2010) Decolorisation of cashew leaves extract with activated carbon in tea bag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chow, Chee Siang (2012) System verilog RTL modeling with embedded assertions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chung, Hui Hui (2011) Risk assessment on safety in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daswir, Daswir (2020) Hubungan komitmen pengurus dengan budaya dan perilaku keselamatan kerja loji penapisan minyak Riau. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Daud, Nur Anati Bazilah (2022) Application of phosphoric acid and phytic acid doped polybenzimidazole for high temperature proton exchange membrane fuel cell. Masters thesis, Universiti Teknologi Malaysia.

Dehghan Najmabadi, Alireza (2012) Strength properties of fly ash based geopolymer concrete containing bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dunal, Amrul (2012) The cost saving in value engineering exercise in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Edrus, Farah Awanis (2008) E-pembelajaran lesen memandu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Elsherairi, Osama Salem (2007) Real-time barcode reader using personal digital assistance (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Facta, Muchammad (2012) Ozone generation with dielectric barrier discharge chamber using single switch resonant converter. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Fadil, Nor Aisyah (2003) Portal pengurusan dan penyeliaan seminar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Fahami Zainal, Sheikh Muhammad Hafiz (2016) The virtual force feedback for torque estimation and control in a vechicle Steer by Wire (SBW) system. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Faidi, Mohd. Azahari (2009) Pengeluaran primer bersih kawasan hutan hujan tropika menggunakan data Aster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Faisal, Ummu Habibah (2022) Characterization of ligninolytic agrobacterium sp. Strain s2 and identification of the lignin depolymerization enzymes involved. Masters thesis, Universiti Teknologi Malaysia.

Farzad, Reza Hashemi (2011) Properties of alumina trihydrate filled polyproylene/ethylene propylene diene monomer composites for cable applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ghalip, Ammar Yassin (2004) Arab Travellers Images of Malaysia: Comparison of Push and Pull Factors in Technological Mediated Environment. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Ghazalli, Shuwaibatul Aslamiah (2022) Oil palm fresh fruit bunches ripeness classification with color and texture features extraction. Masters thesis, Universiti Teknologi Malaysia.

Goh, Shu Wei (2003) Problems faced by local sub-contractor in public works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Wei Kiat (2012) Transformer inrush signature recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

H'ng, Gaik Hi (2013) Development of general purpose graphics processing unit with shading capability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hadi Yaacob, Mohd. Ikhwan (2008) Programmable capacitor charging power supply for Nd : YAG laser system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hadiwinoto, Dewi Dwirianti (2002) Membrane bioreactor for treatment of high-sulfate wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haghi, Abbas (2012) Gradient image generator hardware/software co-design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hajari, Mohammad Hamed (2012) Modeling and control of industrial servo pneumatic actuator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamdan, Mohamed Yahya (2023) Development of entrepreneurship eco-system for tourism sector in Sultanate of Oman. PhD thesis, Universiti Teknologi Malaysia.

Hammood, Oday Hamzah (2012) Punching shear resistance of flat slab with various types of shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hammuda Aluhwal, Omar Kalifa (2008) Simulation study of improving oil recovery by polymer flooding in a Malaysian reservoir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hamrayev, Hemra (2022) Green synthesis of zinc oxide nanocomposites mediated by biopolymer for anticancer application. Masters thesis, Universiti Teknologi Malaysia.

Hamuda, Esmael Ali Ramadan (2006) Automatic coronary artery detection in cardiogram image. Masters thesis, Universiti Techonologi of Malaysia, Faculty of Electrical Engineering : Electrical-Electronics & Telecommunication.

Hamzah, Amir (2020) Pengurangan kesesakan lalu lintas melalui kawalan lampu isyarat berasaskan integrasi imej dan logik kabur. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Hamzah, Hairul Mardiah (2022) Radiation grafted Bi-functional cation exchange membrane for vanadium redox flow battery. Masters thesis, Universiti Teknologi Malaysia.

Haron, Ahmad Lutfi (2003) Portal komuniti industri kecil dan sederhana. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Haron, Haiza Wahida (2006) Penggunan web gis oleh pihak berkuasa perancangan : tinjauan kandungan dan tahap perkhidmatan yang disediakan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Haron, Norhazlan (2005) Faktor-faktor yang mempengaruhi penjanaan trip ke tempat kerja dan kesan pelaksanaan teleworking dalam mengurangkan pencemaran udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Harun, Muhammad Arif (2022) Thermal performances of hybrid nanofluids as coolant in computers using design of experiment method. Masters thesis, Universiti Teknologi Malaysia.

Harun, Nor Farida (2015) Fuel composition transients in solid oxide fuel cell gas turbine hybrid systems for polygeneration applications. PhD thesis, McMaster University, School of Graduate Studies in Partial Fulfilment of the Requirements.

Harun, Notee (2004) Pengaruh reka bentuk latihan terhadap pemindahan latihan (persepsi peserta program latihan kerajaan elektronik,institut tadbiran awam negara,kampus wilayah selatan). Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Hashim, Mega Suria (2015) Pattern of wayfinding and spatial cognition for effective spatial planning of theme park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hassan, Fuad Mire (2012) Semantics-oriented ontology matching techniques for job seeker's profiles and job's description. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Hasnizom (2012) Numerical simulation of sound absorption coefficient of wood perforated wall panel with uniform small geometric patterns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassim, Muhammad (2022) Modeling flood impact on residential property value. Masters thesis, Universiti Teknologi Malaysia.

Heng, Ai Hoon (2012) Reconfigurable address generation unit for 2D correlation in FPGA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ho, Jin How (2002) Life cycle cost analysis on corrosion remedial measures for concrete bridges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseini, Mostafa (2012) The impact of economic recession on construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Husaini, Muaaz Habib (2012) Throughput enhancement in long term evolution advanced through relaying strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husin, Muhamad Rasyidi (2012) Hydroxyapatite and montmorillonite filled high density polyethylene hybrid composites for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hussein, Husham Idan (2012) Power system security analysis using grid computing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

I Ali, Raja Normala (2004) The implication of e-commerce on indirect tax revenue : a case study. Masters thesis, Universiti Teknologi Malaysia.

Ibrahim, Suhaimi (2006) A document-based software traceability to support change impact analysis of object-oriented software. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim H.a, Nawi A.M.b, Ali A. (2019) The depiction of metaphorical aspects in the selected literary work by the American dramatist Eugene O'Neill. UNSPECIFIED thesis, UNSPECIFIED.

Ihsan, Nurashikin (2012) Potential use of oil palm empty fruit bunch for bioethanol production by locally isolated yeast. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Imaduddin, Fitrian (2015) A novel magnetorheological valve with meandering flow path structure. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Ishak, Iskandar Shah (2012) Unsteady aerodynamic wake of helicopter main-rotor-hub assembly. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohd. Yunus (2012) Shear behaviour of reinforced concrete beams strengthened with carbon fibre reniforced polymer fabrics. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Nurul Arafah (2012) Lead time in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mazlan (2005) The influence of intellectual capital on the performance of Telekom Malaysia. PhD thesis, Universiti Teknologi Malaysia, Business & Advanced Technology Centre.

Ithnin, Ahmad Muhsin (2015) Real-time water-in-diesel emulsion fuel production system for diesel electric generator. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Jaffar, Khairi (2007) Practical Completion for Water Supply Projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jamian, Nor Ruwaida (2017) The influence of moisture and ash content of palm fibre and shell towards particulate emission in palm oil mills. PhD thesis, Universiti Teknologi Malaysia.

Jayaraman, Prebagaran (2009) Shipbuilding transfer of technology model from the recipient prospective. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Jemale, Alia Sofie (2010) Mixed-mode silica monolith as an efficient separation medium for capillary electrochromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jidin, Auzani (2011) Improved dynamic performance of direct torque control of induction machines. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Johar, Farhana (2003) Placement and routing in VLSI design problem using single row routing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Johari, Nasrul Hadi (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ka Yik, Nin (2012) The assessment of reinforced concrete solid floor slabs subjected to combined actions of vertical and lateral load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kabirifar, Kamyar (2012) Time measurement for improvement for construction using deming theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kahalian, Mohammad Saber (2012) The influence of project management methodology utilization (PPMU) on project success in IT-entrepreneur project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kalash, Haydar Sabeeh (2010) Development of universal software radio peripheral amplifier for underwater acoustic platform using software defined radio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamardan, Muhammad Imran Firdaus (2022) Isolation and characterization of lignin monomer- degrading bacteria under acidic condition from tropical peatland in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Kamaruddin, Nur Amalina (2021) Near field radio link propagation model for wireless capsule endoscopy. Masters thesis, Universiti Teknologi Malaysia.

Kamaruddin, Nurul Izzati (2021) Comfort temperature of air-conditioning living room with various set point of temperature under hot-humid climate. Masters thesis, Universiti Teknologi Malaysia.

Kamyar, Mehranzamir (2012) MPP control with z-source inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kaur, Jesbains (2017) The effects of annealing on microstructural changes for aluminium nitride epitaxial grown on sapphire by transmission electron microscopy. PhD thesis, Universiti Teknologi Malaysia.

Kazilan, Kuzaida (2007) Implementation of collateral warranties in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Khan, Faisal (2014) Economic exposure, pricing of risk and various volatility dynamics of stock returns on an emerging stock market. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Khasri, Azduwin (2012) Slow pyrolysis of imperata cylindrica in a fixed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Kong, Wan Looi (2010) Mutation of cyclodextrin glycosyltransferase by domain swapping and site-directed mutagenesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Kuppusamy, Puspadevi (2022) Information security policy compliance behaviour model for Malaysian federal public sector agencies. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Kusmiyati, Kusmiyati (2006) A single-step catalytic process for the conversion of methane to gasoline over tungsten zeolite catalysts. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Lee, Si Long (2012) Parallel image resizing in DCT domain using multi-core processor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Ya Ling (2001) The machine efficiency of (M/M/1) machine interference problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Yee Khai (2012) Mechanical properties of glass fibre reinforced concrete with palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Yen Soo (2002) Development of a prototype for Johore tourism information system in web environment. Masters thesis, Universiti Teknologi Malaysia, Computer Science and Information System.

Leong, Shiang Chin (2003) Procurement method as conflict and dispute reduction mechanism for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Li, Jia Wei (2012) The system identification of HVAC artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Ai Ling (2015) The influence of e-participation as antecedent on behavioural intention to use among Sarawak e-filers. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Lim, See Leng (2012) VLSI design of sorting algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Wen Hong (2008) Interpolation and mapping of the total electron content over the Malaysian region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lit, Asrani (2012) Network partitioning and IP placement in network on chip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Madadi Ardekani, Sara (2012) Mechanical and thermal properties of Montmorillonite filled newspaper fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahardika, Destrian Adi (2012) Risk management of bridge construction project in Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mahdi, Nor Haslinda (2004) The Effectiveness of Lead Time Subsystem in Kenwood Electronic Technology (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Mahmood, Yasir (2022) An ensemble model to improve effort estimation accuracy for software development. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Maindy, Uthayakumar (2011) Performance studies between wimax (802.16m) and lte advanced for 4g. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Majlan, Kamyar Ahmadi (2011) Synthesis and characterization of ni-cnt composite coating produced by direct electro plating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malek, Afagh (2012) Assessment of ketchup companies performance in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malik, Muhammad Noman (2015) Human values identification and assessment tool development for TQM context. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Mandala, Satria (2012) New framework for securing mobile adhoc network using lightweight authentication and signature-based intrusion detection system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mariappan, Gengatharan (2006) Isu-isu pengintegrasian pangkalan data ukur kadaster dan sistem pendaftaran tanah berkomputer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Marwoto, Putut (2004) Pembangunan reaktor DC PECVD dan kajian struktur filem tipis karbon amorfus terhidrogen (a-C:H). PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat, Norizan (2012) Surge arrester condition monitoring using leakage current and thermography techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Amin, Ismail (2006) Pengecaman wajah menggunakan kaedah graf terhubung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Daud, Azra Munirah (2003) Pengolahan airsisa industri menggunakan mangkin TiO2 dengan tenaga elektrik voltan rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Jusoh @ Hussain, Afifuddin Husairi (2017) A Framework for the diffusion of building information modeling (BIM) adoption strategy for the private client organisation. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School of Engineering and Advance Technology.

Mat Noor, Fazimah (2018) Foam replicated porous 316l stainless steel based on Taguchi method for biomedical applications. PhD thesis, Universiti Teknologi Malaysia.

Md. Daud, Ab. Hamid (2010) Response time on traffic signal complaints in the state of Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Shamsudin, Nurshamshida (2018) Training design, development and evaluation for occupational safety and health hazard identification using virtual reality. PhD thesis, Universiti Teknologi Malaysia.

Meynagh, Mahdi Moharrami (2012) The effect of atticventilation on energy optimization in an existing green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misran, Aishah (2012) Performance of free water surface constructed wetland pretreated with magnetic field exposure in sewage treatment. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Moghadam, Ali Mokhtari (2013) Optimization of pipe spool fabrication shop scheduling using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Norhidayah (2006) Amalan dan prestasi dalam perolehan elektronik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamad, Nurhana (2012) Numerical simulation of fluid-structure interaction in stenotic artery disease considering mass transfer using adina CFD package. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad , Nazatul Shima (2004) Faktor-faktor yang mempengaruhi keberkesanan sistem Job Management System (JMS) di pusat Operasi SAJ Holdings. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Lazim, Mazidatul Ashiqeen Balqiah (2012) Treatment of final discharge palm oil mill effluent (POME) using Biofilm-Coated macrocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohamad Rozi, Rusesaliza (2003) Space time block coding using phase shift keying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Sukri, Siti Nur Amalina (2022) Green synthesis of zinc oxide silver nanoparticles using punica granatum for antibacterial and anticancer applications. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Yatim, Norfadzliah (2012) Predictioin of fruit quality using near-infrared VIA NARX model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad, Mazura (2004) Kajian terhadap keberkesanan sistem pengesanan imej cek dan hubungannya dengan kualiti kerja : Satu Kajian kes keatas pekerja SPICK KL, RHB Bank Berhad. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Mohamed, Muna (2003) Pengolahan air larut lesap melalui tanah bencah buatan aliran subpermukaan dengan "Scirpus globulosus" dan "Ericaulon sexangulare" bagi penyingkiran logam berat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Shahnaz Ali Abdalla (2023) Delay analysis framework for residential building construction in Abu Dhabi, United Arab Emirates. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Abdul Ghani, N. Afeefah (2011) The effectiveness of RFID in managing logistics activities : case study : Johor Port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammad, Ahmad Faiz (2015) Numerical simulation of wind pressure distribution in urban buildings of random staggered arrays. Masters thesis, Malaysia-Japan International Institute of Technology.

Mohammad, Ahmad Khir (2014) Measurement and improvement of organisational performance using model of performance analysis. PhD thesis, Universiti Teknologi Malaysia, Razak School in Engineering and Advanced Technology.

Mohammad Ghanbari, Mohammad Ghanbari (2015) Exploring the potential of nanofillers for advanced thin film nanocomposite forward osmosis membranes fabrication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Mohammad Khedzer, Nur Atikah (2022) Implementation of eye tracking technique for human behavior quantification. Masters thesis, Universiti Teknologi Malaysia.

Mohammad Pourtousi, Mohammad Pourtousi (2012) Simulation of particle motion in incompressible fluid by lattice boltzmann MRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Razi, Mohd. Adib (2003) Pengurusan dan penentuan tahap kebocoran di dalam sistem bekalan air : kajian kes : Batu Pahat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Nurfathiah (2013) Mass transfer to blood flowing through arterial stenosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammed Al-Haimi, Basheer Mohammed (2013) E-government service model in improving e-services for Ministry of Higher Education and Scientific Research in Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohammed Humaid Alwaili, Salim (2007) Image-based object detection and identification. Masters thesis, Universiti Teknologi Malaysia, Faculty Geoinformation Science and Engineering.

Mohd. Ariff, Mohd. Farid (2005) Pembangunan sistem perolehan imej fotogrametri digital jarak dekat bagi pengukuran craniofacial. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Ghazalee, Nor Husna (2012) Electronic field data collection system for highway inspection maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hanafi@Hanafiah, Mohd. Mukrish (2012) The photoprotective and collagen stimulatory effects of labisia pumila var pumila extract on UVB irradiated human skin fibroblast (HSF1184) cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Hosnan, Mohd. Husaini (2012) The development of wetland conservation and management plan for Sungai Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Kassim, Nazirul Fariq (2022) Technical risk mitigation framework for railway construction project in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Mohd. Mokhtar, Nadzirah (2015) Membrane distillation for textile wastewater treatment using polyvinylidene fluoride cloisite 15A hollow fiber composite membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd. Nasir, Nur’Alyaa (2021) The effect of graphite content on the rheological performance of magnetorheological grease. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Rofi, Mohd. Ramdan (2020) Development of an integrated tissue engineering bioreactor system for microvessel development in a 3D environment. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Saat, Sa'adiah (2006) Analisis untuk mengenalpasti risiko kejadian lubang benam menggunakan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Saufi, Badariah (2010) Penyediaan dan pengurusan inventori jalan dan aset jalan dari lukisan siap bina menggunakan GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Shaari Azyze, Nur Latif Azyze (2012) Stable walking gaits for humanoid robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Mohd. Yazid, Izyan Iryani (2016) Design and investigation of a new mixed-mode magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology (MJIIT).

Mohd. Yusof, Khairul Nizar (2002) Mineralogi, mikrosstruktur dan komposisi kimia tanah baki granit di Semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Zalhan (2016) Enhanced data clustering and classification using auto-associative neural networks and self organizing maps. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Mondali, Mondali (2005) Single point positioning using low cost single frequency GPS receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Movahed, Zohreh (2015) A new analytical method for characterization of fractured reservoirs. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mubarak, Ahmed J. M. (2020) Customization designs and biomechanical analysis of transtibial prosthetic leg. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Mubarak Habiballah, Thagip Tarig (2012) Thermal effect in pressure fluctuation : internal flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad, Muhammad Abdul Hakim (2022) Seagrass mapping using habitat suitability modeling and multibeam echosounder around Redang archipelago. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Muhamad, Yossie Oktora (2012) Voltage stability evaluation using fast minimum singular value analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhammad Fakhree, Muhammad Akif (2022) Rheological properties of magnetorheological elastomer with fountain-like particle chain alignments. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Nasir, Zulhilmi (2013) The awareness and perception of ship-owner toward green vessel technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mukhlas, Nurul 'Azizah (2020) Derivation of extreme non-Gaussian stochastic offshore structural responses using finite memory nonlinear system. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Muniandy, Kavitha (2010) Optimization of recombinant amylase expression using response surface methodology (RSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Murad, Noor Asniza (2003) Performance of fractal structure in planar array antenna design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Tajul A. (2007) Analysis of residual atmospheric delay in the low latitude regions using network-based GPS positioning. PhD thesis, University of New South Wales, Australia, School of Surveying & Spatial Info System, Faculty of Engineering.

Mustafar, Mohamad Asrul (2005) Kajian jaringan kawalan pugak bagi negeri Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mustapha, Azwan (2012) Stochastic streamflow analysis and simulation using disaggregation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nagappan, Sarojini Devi (2022) Classification of granular features in urban built land using machine learning techniques in Google Earth Engine platform. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Nasir, Noor Rizawati (2021) The implementation of science technology and innovation policy in addressing the well-being of the low-income households in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Nasri, Esiana (2012) Real-time scheduling and controller design for network control system with delay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nasrul ‘Alam, Fakhrul Aniq Hakimi (2022) Spatio-temporal normalized joint coordinates as features for skeleton-based human action recognition. Masters thesis, Universiti Teknologi Malaysia.

Nawabjan, Amirjan (2012) Single mode ridge waveguide using hybrid organic-inorganic sol-gel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nawawi, Zainuddin (2012) Partial discharge characteristics in CIGRE method II electrode system attributed to dielectric surface conditioning and humidity impact. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nex Betin, Timothy (2006) Assessing cumulative watershed effects by zig-zag pebble count method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Zee Leong (2002) Local flange buckling of sections with trapezoidal web profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Wai Seng (2004) Satu Kajian terhadap tahap kepuasan pengguna dalam perkhidmatan terminal layan diri yang di sediakan oleh bank-bank : Satu Kajian di sekitar kawasan Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Ni'am, Moh Faiqun (2012) Suspended solids removal in wastewater using electrocoagulation and magnet. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik, Reza Hashemi (2013) The mathematics of amputation and inscription in rasmi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nor Muhammad, Nor Aziah Amirah (2022) Poultry esophagus detection using retinanet and mask region-based convolutional neural network object detection model. Masters thesis, Universiti Teknologi Malaysia.

Nordin, Soeb (2009) Height modernization using fitted geoid models and myrtknet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Noroozi, Erfaneh (2015) Dynamic hashing technique for bandwidth reduction in image transmission. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Omal Al-Najeh, Anesa Maolod (2012) Reducing packet loss in fast handover for mobile IPv6 (FMIPv6) by using adaptive packet buffering tuning algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Omar, Zamri (2002) Modelling and simulation of an active suspension system using active force control strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ong, Chi Siang (2015) Submerged membrane photocatalytic reactor using polyvinylidene fluoride-polyvinylpyrrolidonetitanium dioxide for oily wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ossen, Dilshan Remaz (2005) Optimum overhang geometry for high rise office building energy saving in tropical climates. PhD thesis, Universiti Teknologi Malaysia.

Othman, Ahmad Faisal (2012) Wireless meter reader. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Mohd. Radzlee (2007) Pelan pengurusan keselamatan dan kesihatan pekerjaan di tempat kerja bagi bangunan tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Pandunata, Priza (2011) Optimization of non-uniform relational B-Spline surface reconstruction using growing grid-differential evolution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Pong, Aenny Tyng Tyng (2004) Kajian Hubungan Antara Komunikasi Ke Bawah Di Peringkat Pengurusan-Subordinat Dengan Prestasi Pekerja Di Majlis Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Pourfakhimi Abarghouei, Seyed Shahabeddin (2012) The role of "online user generated hotel reviews" in accommodation purchase behaviour of Kuala Lumpur international free independent travellers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Purnomo, Purnomo (2012) Principle methods of assessing concurrent delays in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Quek, Hsiao Pei (2009) Mechanisms of chromium (VI) resistance by acinetobacter haemolyticus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rachmawaty, Rachmawaty (2015) Judicial interpretation of consequential loss in construction contract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Rafsanjani, Ahmad Sahban (2023) A malicious URL detection framework using priority coefficient and feature evaluation. PhD thesis, Universiti Teknologi Malaysia.

Rahman, Md. Habibur (2015) Vibrating nanoneedle and lab-on-chip microfluidics system for single cell mechanics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahman, Md. Mujibur (2022) Application of real-time non-surfactant emulsion fuel supply system for common rail diesel engine. Masters thesis, Universiti Teknologi Malaysia.

Rajinder Singh, Harvinder Kaur (2018) Improvement on label production software quality with test class standardization using XP technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Computing.

Rakhmania, Rakhmania (2022) Electrocoagulation of palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia.

Ramlie, Faizir (2017) Characterization of bees algorithm into the Mahalanobis-Taguchi system for classification. PhD thesis, Universiti Teknologi Malaysia.

Ranjbar, Navid (2012) Nonlinear finite element analysis of multi-layers slim IBS beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razali, Muhammad Syafiq (2022) Bioleaching of copper from waste printed circuit board by potential bacteria isolated from a landfill. Masters thesis, Universiti Teknologi Malaysia.

Razzaghian, Mohammad (2012) Simulation of natural convection in open ended enclosures by lattice boltzmann method SRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Redzuan, Norizah (2002) Micro drilling of electronic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Reza Zahedi, Yasser K. (2011) Performance of electromagnetic communication in underwater wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rohim, Muhamad Amirul Sunni (2022) Magnetostriction behavior modeling of magnetorheological foam using data-driven neural network algorithm. Masters thesis, Universiti Teknologi Malaysia.

Sabili, Sufi Nazihah (2022) Fabrication of nanopore with different parameters in depth and diameter on silicon substrate using one-step focused ion beam milling. Masters thesis, Universiti Teknologi Malaysia.

Sadali, Mohd. Faizal (2022) The enhancement of process parameters to improve microstructures and mechanical properties of TI-6AL-4V alloy produced by selective laser melting. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Sadek, Mohammad A. M. (2008) Forward link power control for high altitude platform station w-cdma system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sahar, Noor Syazwana and Che Harun, Fauzan Khairi (2019) Development and analysis of electrocardiography circuit on flexible polymers. Masters thesis, Universiti Teknologi Malaysia.

Saiful Bahry, Farrah Diana (2018) Impact of website credibility factors on user engagement in Malaysian municipal websites. PhD thesis, Universiti Teknologi Malaysia.

Saleh, Najiyah (2012) The effects of cross-country fault to the power system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salih Mahmoud, Sayed Haider (2012) User resistance factors in post ERP implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Salim, Mohd. Rashidi (2012) Sol-gel based optical wavelength filter using multimode interference. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salleh, Abrari (2018) Sustainable service quality of water and sewerage companies. PhD thesis, Universiti Teknologi Malaysia.

Salleh, Nor ’Asnilawati (2022) A hybrid recurrent neural network and long short-term memory for simplified general perturbations-4 model in orbit propagation. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Samsudin, Shahrin Amizul (2020) Seafloor mapping using multibeam sonar. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Sapiaa Md. Nordin, Nik Abdul Hadi (2015) Development of asymmetric polysulfone and zeolitic imidazole framework 8 mixed matrix membrane for carbon dioxide and methane separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Sha'ari, Fatimah Az-Zahra' (2012) Performance of mobile jack-up units in various subsoil conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shaharuddin, Nur Haziqah (2022) Wind noise simulation of the a-pillar and side view mirror using generic vehicle model, DrivAer. Masters thesis, Universiti Teknologi Malaysia.

Sham Ismail, Fatimah (2011) Self organizing genetic algorithm for multi-objective optimization problems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shamsudin, Supiah (2003) Non-point phosphorus loadings and reduction in Layang reservoir systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shanan, Essam Jassim (2012) Partial transient liquid phase diffusion bonding of stainless steel (SS304) and metal matrix composite (AL/MG2SI) by using aluiminium interlayer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sheikh, Shujaatullah (2012) Strengthening of reinforced concrete columns using FRP fabric. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shourangiz, Ehsan (2012) The development of automated system for evaluating design changes fee using BIM support. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siew, Haw Siong (2004) Tahap kecekapan teknologi maklumat : Persepsi guru Sekolah Menengah Daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Sim, Chee Chong (2004) Strategi Teknologi Dan Hubungannya dengan Prestasi Syarikat: SAtu Kajian ke atas Syarikat Berasaskan Teknologi. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Soom, Ezanizam Mat (2018) A reliable procedure for load coefficient determination in structural reliability assessment of ageing offshore platforms. PhD thesis, Universiti Teknologi Malaysia.

Soon, Koon Leng (2004) Information technology adoption among small businesses. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Suchaad, Saravid (2022) Ethereum based blockchain implementation in home automation for decentralized device to device communication. Masters thesis, Universiti Teknologi Malaysia.

Sulaiman, Siti Zubaidah (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Suliman T., Alatawi Salem (2015) A conformance measurement model for quality assurance standard in e-learning: a case study in University Of Tabuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sulong, Mohd. Ayub (2011) Numerical characterisation of hollow sphere composites based on perforated inclusions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Supari, Nurhaziqah (2012) Screening of quantitative trait loci for panicle productivity in Malaysian rice (Oryza Sativa L.). Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Syafruddin, Syafiqah (2012) Scoring assessment of regional materials for green highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syed Azman, Sharifah Radhiah (2020) Issues and challenges in execution stage of post disaster reconstruction. Masters thesis, Universiti Teknologi Malaysia.

Syed Hassan, Syed Ahmad Helmi (2012) Enhancement of engineering students' problem solving skills through cooperative problem-based learning. PhD thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Syed Jaapar, Syaripah Za'imah (2016) Performance of sonic assisted solvent mimicry using water on ginger bioactive compounds extraction. PhD thesis, Universiti Teknologi Malaysia.

Tai, Kah Mon (2012) Performance of concrete with uncrushed palm oil shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Mei Jing (2016) 3D virtual environment as a sport psychological rehabilitation tool to enhance performance of volleyball athletes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Tan, Pui Yee (2022) Effect of n-methyl-2-pyrrolidone and methanol on the carbon steel corrosion in hybrid monoethanolamine solutions. Masters thesis, Universiti Teknologi Malaysia.

Tan, Siang Guan (2011) Optimization of low cost ultrasound machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Sing Lin (2013) Capital structure and performance of Malaysia plantation sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Tavalaei, Jalal (2012) Mitigation of ferroresonance in power transmission network by applying UPFC and STATCOM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tayyeci, Meysam (2012) Study the impact of microturbine in distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Termehyousefi, Amin (2016) Optimisation of carbon nanotubes growth conditions by CVD and its application in amperometric glucose biosensor. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Then, Frederick (2013) Energy efficiency technology in office and commercial buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation & Real Estate.

Thinakaran, Rajermani (2020) Fuzzy-based user modelling for motivation assessment in programming learning adaptive web-based education systems. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Thoo, Hoi Hian (2002) Life cycle assessment of steel construcrtion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ting, Connie (2009) The best practice of vendor performance evaluation for fishing reel manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Toh, Chee Leng (2002) Microwave transceiver design with adaptive transmit power control for rain attenuation problem in tropical region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tsenbeya, Ishaku Hassan (2012) Rainwater harvesting through community participation as an alternative to safe water supply in Nigerian rural communities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tuan Kamaruddin, Tengku Nordayana Akma (2012) Self tuning PID controller for idle speed control internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tufail, Muhammad Asim (2006) Factors leading to decentralization of office firms: the case of multimedia super corridor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ubaidillah, Ubaidillah (2016) Waste tire rubber based magnetorheological elastomers. PhD thesis, Universiti Teknologi Malaysia.

Ujang, Muhamad Uznir (2008) Sistem navigasi berasaskan algoritma Dijkstra di dalam persekitaran tiga dimensi. Masters thesis, Universiti Teknologi Malaysia, Faculty Geoinformation Science and Engineering.

Ullah, Aleem (2013) Development of multi-criteria decision analysis methodology to determine product end-of-life treatment options. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vali Mohamed, Anwar Ali (2014) High fidelity simulation models for equipment performance prediction in semiconductor industry. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

W. Ibrahim, Almabrouk (2012) The apllication of CSCW in Sebha University in student affairs unit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wahdeen, Mohammed Mobark Salem (2022) Task oriented feature extraction for complex human activity recognition. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Wahi Anuar, Muhammad Asyraf (2023) New aspect of code automation for web application framework. PhD thesis, Universiti Teknologi Malaysia.

Wan Abdul Rashid, Wan Azlan (2012) Numerical analysis on static load capacity of prestressed concrete sleepers under hypothetical bearing pressure distribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Aris, Wan Anom (2011) Development of ISKANDARnet differential global positioning system for Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wan Hamzah, Wan Nor Hanisah (2012) Statistical downscaling of precipitation extreme events. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Nik, Wan Mohd. Norsani (2005) Performance investigation of RBD palm oil as hydraulic fluid using bench tests and hydraulic test RIG. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wee, Vivien Mui Eik (2002) Developing a multiple-choice question generator that promotes course links and administrative control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yahaya, Nazli (2002) Development and evaluation of a web-based learning system for re-conceptualization : basic electric circuits. PhD thesis, Universiti Teknologi Malaysia, Science and Mathematics Education, Faculty of Education.

Yahya, Adi Safyan (2010) Development of seismic microzonation maps using geographic information systems (GIS) for Banda Aceh City, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yahya, Yazriwati (2022) Technological and social dimension on acceptance of social networking sites among students in higher learning institutions. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Yaribakht, Amir Hesam (2020) Robust color image watermarking using Discrete Wavelet Transform, Discrete Cosine Transform and Cat Face Transform. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Yee Wah, Cheong (2010) Effectiveness of external technology transfer to CEPP, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resources Development.

Yeoh , Phaik Yong (2004) Integration of projection histograms and linear prediction techniques for real-time tracking of moving object. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yong, Cheryl Yie Wah (2010) Performance of upflow anaerobic sludge blanket (UASB) reactor using anaerobic granular sludge for bioconversion of leachate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yousefi, Moslem (2013) A new optimal design approach for plate-fin heat exchangers by evolutionary computation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yudhana, Anton (2011) Turtle hearing classification for turtle excluder devices design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusoff, Hashim (2013) Adoption of information technology for counterproductive behaviour index profiling through polygraphic method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yusoff, Hashim (2001) Polygraph-assessment test for pre employment of information technology personnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zainal Abidin, Mohamad Hafizat (2022) Off-chain solution for scalable blockchain-based vehicular network. Masters thesis, Universiti Teknologi Malaysia.

Zaini, Zalissa (2006) Sistem maklumat geografi dalam penentuan pemeliharaan kawasan warisan; kajian kes: Bandar Taiping, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainuddin, Nurul Farha (2020) Task difficulty tools to analyze cognitive performance and neural efficiency for cyclist in virtual reality. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.

Zamzuri, Ahmad Khairul (2012) Modification of slope maintenance program along FT59, Jalan Tapah-Cameron Highland, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zarei, Alireza (2012) Optimization of biodiesel production from jatropha oil using immobilized lipase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zeinali, Mohammadjavad (2015) Design and optimization of innovative magnetorheological damper with low temperature. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Zulhaimi, Hanna Ilyani (2014) Performance of integrated treatment system of photofenton and membrane bioreactor for synthetic spent caustic wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zulkifli, Muhammad Aniq Razin (2022) Optimum period of structural health monitoring for ageing fixed offshore platform. Masters thesis, Universiti Teknologi Malaysia.

Zulkifli, Nor Saradatul Akmar (2016) Intrinsic connections between fronto-parietal network during mental arithmetic tasks. PhD thesis, Universiti Teknologi Malaysia.

Other

Ismail, Issham (2008) Fakulti gemilang, graduat terbilang. Faculty of Chemical & Natural Resources Engineering, UTM Skudai.

This list was generated on Tue Mar 19 00:43:22 2024 +08.