Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "R Medicine"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 49.

Article

Abdul Hanan Abdullah, (2013) A critical review for an accurate and dynamic prediction for the outcomes of traumatic brain injury based on glasgow outcome scale. Journal of Medical Sciences (Faisalabad), 13 (4). pp. 244-252. ISSN 1682-4474

Abdul Wahab, Abdul Hadi and Abdul Kadir, Mohammed Rafiq and Harun, Muhamad Noor and Tunku Zainol Abidin, Tunku Kamarul Zaman and Syahrom, Ardiyansyah (2017) Number of pegs influence focal stress distributions and micromotion in glenoid implants: a finite element study. Medical & Biological Engineering & Computing, 55 (3). pp. 439-447. ISSN 0140-0118

Ahmad, (2012) The inference of breast cancer metastasis through gene regulatory networks. Journal Of Biomedical Informatics, 45 (2). pp. 350-362. ISSN 1532-0464

Alizadeh, Mina and Abdul Kadir, Mohammed Rafiq and Mohd Fadhli, Miskon and Fallahiarezoodar, Ali and Azmi, Baharudin and Malliga, Raman Murali and Kamarul, Tunku (2013) The use of x-shaped cross-link in posterior spinal constructs improves stability in thoracolumbar burst fracture: a finite element analysis. Journal of Orthopaedic Research, 31 (9). pp. 1447-1454. ISSN 0736-0266

Amin, Muslim and Nasharuddin, Siti Zahora (2013) Hospital service quality and its effects on patient satisfaction and behavioural intention. Clinical Governance, 18 (3). pp. 238-254. ISSN 1477-7274

Ardiyansyah Syahrom, (2013) Permeability studies of artificial and natural cancellous bone structures. Medical Engineering & Physics, 35 (6). pp. 792-799. ISSN 1350-4533

Baqutayan S.M.S., (2012) The effect of anxiety on breast cancer patients. Indian Journal of Psychological Medicine, 34 (2). pp. 119-123. ISSN 0253-7176

Chin, Hong Neoh and Pui, Yi Yung and Zainon Noor, Zainura and Razak, Mohd. Hafizuddin and Aris, Azmi and Md. Din, Mohd. Fadhil and Ibrahim, Zaharah (2017) Correlation between microbial community structure and performances of membrane bioreactor for treatment of palm oil mill effluent. Chemical Engineering Journal, 308 . pp. 656-663. ISSN 1385-8947

Choi Sang Long, (2013) Sustaining customers' loyalty: a survey of a coating resins manufacturer. Journal of Scientific and Industrial Research, 72 (12). pp. 731-734. ISSN 0022-4456

Chua Lee Suan, (2013) Comparison of total phenolic content, scavenging activity and hplc-esi-ms/ms profiles of both young and mature leaves and stems of andrographis paniculata. Natural Product Communications, 8 (12). pp. 1725-1729. ISSN 1934-578X

Chua Lee Suan, (2013) A review on plant-based rutin extraction methods and its pharmacological activities. Journal of Ethnopharmacology, 150 (3). pp. 805-817. ISSN 0378-8741

Daud, Rosdi and Abdul Kadir, Mohammed Rafiq and Izman, Sudin and Md Saad, Amir Putra and Lee, Muhammad Hisyam and Che Ahmad, Aminudin (2013) Three-dimensional morphometric study of the trapezium shape of the trochlea tali. Journal of Foot & Ankle Surgery, 52 (4). pp. 426-431. ISSN 1067-2516

Eko Supriyanto, (2013) Events associated with apoptotic effect of p -coumaric acid in hct-15 colon cancer cells. World Journal of Gastroenterology, 19 (43). pp. 7726-7734. ISSN 1007-9327

El-Enshasy, Hesham Ali and Elsayed, Elsayed Ahmed and Aziz, Ramlan and A. Wadaan, Mohamad (2013) Mushrooms and truffles: historical biofactories for complementary medicine in africa and in the middle east. Evidence-Based Complementary and Alternative Medicine . ISSN 1741-427X

Ganapathy, Birintha and Ying, Choy Yieng and Ibrahim, Norahim (2016) Bioelectricity generation based on acid red 27 decolourization in microbial fuel cell. Journal of Advanced Research in Applied Sciences and Engineering Applications, 5 (1). pp. 42-52. ISSN 2462-1943

Gurpreet Birdi, (2012) Modification of alginate degradation properties using orthosilicic acid. Journal Of The Mechanical Behavior Of Biomedical Materials, 6 . pp. 181-187. ISSN 1751-6161

Hasnah Mohd. Sirat, (2013) Chemical constituents of the leaf of alpinia mutica roxb. Natural Product Research, 27 (16). pp. 1468-1470. ISSN 1478-6419

Hasnah Mohd. Sirat, (2013) Essential oils of alpinia rafflesiana and their antimicrobial activities. Natural Product Communications, 8 (9). pp. 1317-1320. ISSN 1934-578X

Hasnah Mohd. Sirat, (2013) Potent microbial and tyrosinase inhibitors from stem bark of bauhinia rufescens (fabaceae). Natural Product Communications, 8 (10). pp. 1435-1437. ISSN 1934-578X

Irina Safitri Zen, (2013) Use of asbestos building materials in Malaysia: legislative measures, the management, and recommendations for a ban on use. International Journal of Occupational and Environmental Health, 19 (3). pp. 169-178. ISSN 1077-3525

Kam, Kui Lin and Hau, Yuan Wen (2016) Platform independent web-based telecardiology for connected heart care. Jurnal Teknologi (Sciences And Engineering), 78 (7-5). pp. 113-121. ISSN 0127-9696

Lee Ting Hun (RO), (2013) Edible bird's nest extract as a chondro-protective agent for human chondrocytes isolated from osteoarthritic knee: in vitro study. BMC Complementary and Alternative Medicine, 13 . ISSN 1472-6882

Lim Yaik Wah, (2013) Internal shading for efficient tropical daylighting in Malaysian contemporary high-rise open plan office. Indoor and Built Environment, 22 (6). pp. 932-951. ISSN 1420-326X

Malarvili Bala Krishnan, (2013) Frequency analysis of capnogram signals to differentiate asthmatic and non-asthmatic conditions using radial basis function neural networks. Iranian Journal of Allergy Asthma and Immunology, 12 (3). pp. 236-246. ISSN 1735-1502

Md. Rahim Sahar, (2013) Natural fe3o4 nanoparticles embedded zinc-tellurite glasses: polarizability and optical properties. Material Chemistry and Physics, 138 (1). pp. 174-178. ISSN 0254-0584

Mohammed Rafiq Abdul Kadir, (2013) Finite element analysis of zygomatic implants in intrasinus and extramaxillary approaches for prosthetic rehabilitation in severely atrophic maxillae. International Journal of Oral and Maxillofacial Implants, 28 (3). E151-E160. ISSN 0882-2786

Mohd. Fadhil Md. Din, (2013) Effect of light/dark cycle on biomass and lipid productivity by chlorella pyrenoidosa using palm oil mill effluent (POME). Journal of Scientific and Industrial Research, 72 (11). pp. 703-706. ISSN 0022-4456

Mohd. Nazri Bajuri, (2013) Biomechanical analysis of the wrist arthroplasty in rheumatoid arthritis: a finite element analysis. Medical and Biological Engineering and Computing, 51 (1-2). pp. 175-186. ISSN 0140-0118

Mohd. Rofi, Mohd. Ramdan and Sukmana, Irza and Rashidi, Nur Syazana and Mat Noor, Noor Jasmawati and Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah (2017) Three-dimensional advance dynamic culture system promotes microvessel development from cultured endothelial cells in vitro. ARPN Journal of Engineering and Applied Sciences, 12 (2). pp. 371-376. ISSN 1819-6608

Mohd. Zin Kandar, (2013) Investigating daylight quality using self-shading strategy in energy commission building in Malaysia. Indoor and Built Environment, 22 (5). pp. 822-835. ISSN 1420-326X

Nor Aishah Saidina Amin, (2013) Optimizing removal of cod from water by catalytic ozonation of cephalexin using response surface methodology. Journal of The Chemical Society of Pakistan, 35 (5). pp. 1249-1253. ISSN 0253-5106

Parpizpour, Sepideh and Faeze, Sadat Mohajer and Khoshkhooy, Yazdi Mahsa and Razmara, Jafar and Omar, Mohd. Shahir Shamsir (2017) Structural, functional and molecular dynamics analysis of the native and mutated actin to study its effect on congenital myopathy. Journal of Biomolecular Structure and Dynamics, 35 (7). pp. 1608-1614. ISSN 0739-1102

Parpizpour, Sepideh and Razmara, Jafar and Shamsir, Mohd Shahir and Md. Illias, Rosli and Abdul Murad, Abdul Munir (2017) The role of alternative salt bridges in cold adaptation of a novel psychrophilic laminarinase. Journal of Biomolecular Structure and Dynamics, 35 (8). pp. 1685-1692. ISSN 0739-1102

Ramlan Abd. Aziz, (2013) Bioprocess for semi-industrial production of immunomodulator polysaccharide pleuran by pleurotus ostreatus in submerged culture. Journal of Scientific and Industrial Research, 72 (11). pp. 655-662. ISSN 0022-4456

Ramlee, Muhammad Hanif and Derus, Azura and Supriyanto, Eko (2017) Three-dimensional reconstruction of cone beam computed tomography images using oscar-analysis on 36 projections. Nuclear Medicine and Biomedical Imaging, 2 (1). pp. 1-4. ISSN 2398-3361

Samdin, Siti Balqis and Ting, Chee Ming and Ombao, Hernando and Shaikh Salleh, Sheikh Hussain (2017) A unified estimation framework for state-related changes in effective brain connectivity. IEEE Transactions on Biomedical Engineering, 64 (4). pp. 844-858. ISSN 0018-9294

Shreeshivadasan Chelliapan, (2013) Removal of organic compound from pharmaceutical wastewater using advanced oxidation processes. Journal of Scientific and Industrial Research, 72 (4). pp. 248-254. ISSN 0022-4456

Siti Zulaiha Hanapi, (2013) Agriculture wastes conversion for biofertilizer production using beneficial microorganisms for sustainable agriculture applications. Malaysian Journal of Microbiology, 9 (1). pp. 60-67. ISSN 2231-7538

Chen, Di and Xia, Xuhui and Wong, Tuck Whye and Bai, Hao and Behl, Marc and Zhao, Qian and Lendlein, Andreas and Xie, Tao (2017) Omnidirectional shape memory effect via lyophilization of PEG hydrogels. Macromolecular Rapid Communications, 38 (7). p. 1600746. ISSN 1022-1336

Book Section

Hermawan, Hendra and Ramdan, Dadan and Djuansjah, Joy Rizki Pangetsu (2011) Metals for biomedical applications. In: Biomedical Engineering: From Theory to Applications. InTech, Rijeka, Croatia, pp. 411-430. ISBN 978-953-307-637-9

Conference or Workshop Item

Abu Kassim, Siti Farah and Jahan, Nusrat and Javed, Muhammad Arshad (2016) Varietal response to ferrous toxicity at germination stage in rice. In: 4th International Science Postgraduate Conference 2016, 22-24 Feb, 2016, Universiti Teknologi Malaysia, Johor.

Khan, Samiullah and Zainul Alam, Siti Atiqah and Abdul Aziz, Nur Syifaaiyah and Jahan, Nusrat and Javed, Muhammad Arshad (2016) Correlation studies for growth and physiological parameters in upland and lowland rice varieties. In: 4th International Science Postgraduate Conference 2016, 22-24 Feb, 2016, Universiti Teknologi Malaysia, Johor.

Mohd. Yusof, Nurul Shafiqa and Supriyanto, Eko and Dewi, Dyah Ekashanti Octorina (2017) Investigation of electrochemical characterization of agarose gel for model of human head correlated to lightning currents. In: 2016 International Conference on Robotics, Automation and Sciences (ICORAS), 2016.

Sardana, Pranshul and Mohamed Ali, Mohamed Sultan and Bala Krishnan, Malarvili (2017) Design and fabrication of helical capacitive stents for monitoring arterial blockages. In: IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 2016, 2016, Kuala Lumpur, Malaysia.

Thesis

Alhaji, Suleiman (2014) A comparative study of electronic health record security requirements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Cheperli, Maral (2014) Information system contextual data quality: a case study (clinic of Universiti Teknologi Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamed Tahir, Zie Zie Azeanty (2007) Pengesanan kecacatan craniofacial berdasarkan reka bentuk templat titik craniofacial. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Omar, Norshafarina (2013) Feature selection for classification of survival analysis in lymphoma cancer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Tan, Shuen Chuan (2007) Three - dimensional craniofacial soft tissue measurements and manipulations using carnio - manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

This list was generated on Wed Oct 18 03:46:54 2017 +08.