Items where Division is "Petroleum and Renewable Energy Engineering" and Year is 2016

A

Abdul Majid, N. F. and Ismail, I. and Hamid, M. F. (2016) Using durian rind as bridging material to overcome fluid loss and lost circulation problems in drilling operations. Jurnal Teknologi, 78 (8). pp. 109-115. ISSN 0127-9696

Abdullah, N. and Yusof, N. and Jaafar, J. and Ismail, A. and Othman, F. E. C. and Hasbullah, H. and Salleh, W. N. W. and Misdan, N. (2016) Preparation of polyacrylnitrile (PAN)/ Manganese oxide based activated carbon nanofibers (ACNFs) for adsorption of Cadmium (II) from aqueous solution. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, The Pacific Sutera HotelKota Kinabalu, Sabah; Malaysia.

Alexander, Jock Asanja and Ahmad Zaini, Muhammad Abbas and Abdulsalam, Surajudeen and El-Nafaty, Usman Aliyu and Aroke, Umar Omeiza (2016) Physicochemical characteristics of surface modified Dijah-Monkin bentonite. Particulate Science and Technology . pp. 1-11. ISSN 0272-6351 (In Press)

D

Dasht Arzhandi, Masood Rezaei and Ismail, Ahmad Fauzi and Goh, Pei Sean and Wan Azelee, Ihsan and Abbasgholipourghadim, Mohammad and Ghani, Ur Rehman and Matsuura, T. (2016) Zeolite zsm5-filled pvdf hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885

Davazdah Emami, S. and Kasmani, R. M. and Hamid, M. D. and Che Hassan, C. R. and Mokhtar, K. M. (2016) Kinetic and dynamic analysis of hydrogen-enrichment mixtures in combustor systems - a review paper. Renewable and Sustainable Energy Reviews, 62 . pp. 1072-1082. ISSN 1364-0321

G

Garba, A. and Nasri, N. S. and Basri, H. and Ismail, R. and Abdul Majid, Z. and D. Hamza, U. and Mohammed, J. (2016) Adsorptive removal of phenol from aqueous solution on a modified palm shell-based carbon: fixed-bed adsorption studies. Desalination and Water Treatment, 57 (60). pp. 29488-29499. ISSN 1944-3994

K

Khulbe, Kailash Chandra and Matsuura, Takeshi and Feng, C. Y. and Ismail, Ahmad Fauzi (2016) Recent development on the effect of water/moisture on the performance of zeolite membrane and MMMs containing zeolite for gas separation; review. RSC Advances, 6 (49). pp. 42943-42961. ISSN 2046-2069

M

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, Takeshi and Rizal, Setria and Zamheri, A. (2016) Stand-alone water treatment : performance of electrospun nanofibers. Jurnal Teknologi, 78 (12). pp. 103-107. ISSN 0127-9696

Mohamed, F. and Hasbullah, H. and Jami'An, W. N. R. and Salleh, W. N. H. W. and Ibrahim, N. and Ali, R. R. (2016) Effect of coagulant bath on the gas permeation properties of cellulose acetate asymmetric membrane. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Mohamed, M. H. and Othman, M. H. D. and Abd. Mutalib, M. and Rahman, M. and Jaafar, J. and Ismail, A. F. and Mohamed Dzahir, M. I. H. (2016) Structural control of NiO–YSZ/LSCF–YSZ dual-layer hollow fiber membrane for potential syngas production. International Journal of Applied Ceramic Technology, 13 (5). pp. 799-809. ISSN 1546-542X

Mohammadian, Erfan and Motamedi, Shervin and Shamshirband, Shahaboddin and Hashim, Roslan and Junin, Radzuan and Roy, Chandrabhushan and Azdarpour, Amin (2016) Application of extreme learning machine for prediction of aqueous solubility of carbon dioxide. Environmental Earth Sciences, 75 (3). pp. 1-11.

O

Okafor, H. E. and Sukirman, Y. and Gholami, R. (2016) Adsorption and wettability study of methyl ester sulphonate on precipitated asphaltene. In: 10th Curtin University Technology Science and Engineering International Conference, CUTSE 2015, 6 -8 Nov 2015, Sarawak, Malaysia.

Ong, Chi Siang and Goh, Pei Sean and Lau, Woei Jye and Misdan, Nurasyikin and Ismail, Ahmad Fauzi (2016) Nanomaterials for biofouling and scaling mitigation of thin film composite membrane: a review. Desalination, 393 . pp. 2-15. ISSN 0011-9164

Onuoha, M. D. U. and Ismail, I. and Ismail, A. S. and Mansor, M. F. (2016) Experimental determination of flow patterns and water holdup of low viscosity oil-water system in horizontal pipes. Sains Malaysiana, 45 (11). 1635 1640. ISSN 0126-6039

R

Ramli, N. and Maskin, M. and Tom, P. P. and Husain, N. and Farid, M. F. A. and Ramli, S. and Adnan, A. S. and Abidin, N. H. Z. (2016) Development of the ageing management database of PUSPATI TRIGA reactor. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Effect of pre-annealing temperature on the growth of aligned a -Fe2O3 nanowires via a two-step thermal oxidation. Surface Review and Letters, 23 (4). ISSN 0218-625X

S

Sani, D. A. and Shahabi, H. and Ahmad, B. A. and Mirmokrigharehveran, S. and Ahmad, B. B. (2016) Application of geographic information system technology in controlling pipeline vandalism of oil and gas industry. Research Journal of Information Technology, 8 (42371). pp. 39-46.

Z

Zoveidavianpoor, M. and Gharibi, A. (2016) Applications of type-2 fuzzy logic system: handling the uncertainty associated with candidate-well selection for hydraulic fracturing. Neural Computing and Applications, 27 (7). pp. 1831-1851.

Zoveidavianpoor, M. and Gharibi, A. (2016) Applications of type-2 fuzzy logic system: handling the uncertainty associated with candidate-well selection for hydraulic fracturing. Neural Computing and Applications, 27 (7). pp. 1831-1851. ISSN 0941-0643

Zoveidavianpoor, M. and Gharibi, A. (2016) Characterization of agro-waste resources for potential use as proppant in hydraulic fracturing. Journal of Natural Gas Science and Engineering, 36 . pp. 679-691. ISSN 1875-5100

Zoveidavianpoor, M. and Samsuri, A. (2016) The use of nano-sized Tapioca starch as a natural water-soluble polymer for filtration control in water-based drilling muds. Journal of Natural Gas Science and Engineering, 34 . pp. 832-840. ISSN 1875-5100