Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Razak School of Engineering and Advanced Technology" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | H | I | J | K | L | M | N | R | S | W | Z
Number of items: 77.

A

Abd. Hamid, Zahidy (2011) The effects of ISO 9000 quality management systems on project management performance in construction industry. PhD thesis, Sekolah Razak UTM Dalam Kejuruteraan dan Teknologi Termaju.

Abdul Fatah, Abdul Yasser and Yusuff, R. M. and Aziz, F. A. and Zulkifli, N. (2011) Simulation of "time-based" versus "sensor-based" traffic light system. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. IEEE, Xi'an, pp. 789-792. ISBN 978-161284485-5

Abdul Manaf, Azizah and Mohd. Daud, Salwani and Masrom, Maslin and Lashkari, Arash Habibi (2011) Security evaluation for graphical password. In: Communications in Computer and Information Science. Springer-Verlag, Dijon, pp. 431-444. ISBN 978-364221983-2

Abedi, M. and Fathi, M. S. and Mohammad, M. F. (2011) Major mitigation measures for delays in construction projects. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia. (Submitted)

Abedi, Mohammad and Fathi, Mohamad Syazli and Mirasa, Abdul Karim (2011) Establishment and development of IBS in Malaysia. In: International Building and Infrastructure Technology Conference (BITECH 2011), Jun 7-8, 2011, Penang, Malaysia. (Submitted)

Ahmad Bashri Sulaiman, (2011) The health of our city universal design : a case of accessibility of public building in Malaysia. In: International Journal Of Arts & Sciences (Ijas) Conference.

Ali Yuzir, (2011) Influence of step increases in hydraulic retention time on (RS)-mcpp degradation using an aerobic membrane bioreactor. Bioresource Technology, 102 (20). pp. 9456-9461. ISSN 0960-8524

Ayat, M. and Masrom, Maslin and Sahibuddin, Shamsul and Sharifi, M. (2011) Issues in implementing IT governance in small and medium enterprises. In: 2011 Second International Conference on Intelligent Systems, Modelling and Simulation (ISMS). IEEE, Los Alamitos, California Washington, pp. 197-201. ISBN 978-076954336-9

Azman Mohamed, (2011) Interaction of underside shaped concrete blocks and beding sand. In: Seminar Penyelidikan Kejuruteraan Awam (Sepka 2011).

B

Bashari Rad B., (2011) Morphed virus family classification based on opcodes statistical feature using decision tree. Communications in Computer and Information Science, 251 (1). pp. 123-131. ISSN 1865-0929

C

Chelliapan, S. and Yuzir, A. and Md. Din, M. F. and Sallis, P. J. (2011) Anaerobic pre-treatment of pharmaceutical wastewater using packed bed reactor. International Journal of Chemical Engineering and Applications, 2 (1). pp. 32-37. ISSN 2010-0221

Chelliapan, Shreeshivadasan and Muhammad Yuzir, Muhamad Ali and Wilby, T. and Sallis, P. J. (2011) Tolerance of the antibiotic tylosin on treatment performance of an up-flow anaerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chelliapan , Shreeshivadasan and Wilby, T. and Sallis, P. J. (2011) Effect Of hydraulic retention time on up-flow anaerobic stage reactor performance at constant loading in the presence of antibiotic tylosin. Brazilian Journal Of Chemical Engineering, 28 (1). pp. 51-61. ISSN 0104-6632

D

Dan'azumi, S. and Shamsudin, Supiah (2011) Modeling the distribution of inter-event dry spell for Peninsular Malaysia. Journal of Applied Sciences Research, 7 (3). pp. 333-339. ISSN 1816-157X

Dolah R., (2011) Etching performance improvement on semiconductor silicon wafers with redesigned etching drum. Jurnal Teknologi, 55 . pp. 53-65. ISSN 0127-9696

F

Fathi, Mohamad Syazli (2011) Context-aware information delivery for construction programme managers: current context. LAP Lambert Academic Publishing, Germany. ISBN 978-3-8465-0214-3

H

H. M. Kaidi, (2011) Hybrid arq type i based on convolutional code. Jurnal Teknologi 54, 54 . pp. 45-54. ISSN 0127–9696

Hairi Zamzuri, (2011) Verification of intelligent fuzzy mechanism control strategy using 9 dof complex tilting railway vehicle model. In: 2011 IEEE International Conference On Intelligent Computing And Intelligent Systems (ICIS 2011).

Hamidinezhad, H. and Wahab, Yussof and Othaman, Zulkafli and Ismail, Abd Khamim (2011) Influence of growth time on morphology and structural properties of silicon nanowires grown by VHF-PECVD. Journal of Crystal Growth, 332 (1). 007-011. ISSN 0022-0248

Haron, Habibah Norehan and Shaharoun, Awaluddin Mohamed (2011) Self-regulated learning, students' understanding and performance in engineering statics. In: 2011 IEEE Global Engineering Education Conference, EDUCON 2011. IEEE, Amman, pp. 450-459. ISBN 978-1-61284-643-9

I

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding SS 316L for the highest green strength by using Taguchi method. In: Advances in Materials and Processing Technologies II. Advanced Materials Research, 264-26 . Trans Tech Publications, Switzerland, pp. 135-140. ISBN 978-303785053-4

Ibrahim, M. H. I. and Muhamad, N. and Sulong, A. B. and Jamaludin, Khairur Rijal and Nor, N. H. M. and Ahmad, S. (2011) Optimization of micro metal injection molding with multiple performance characteristics using grey relational grade. Chiang Mai Journal Of Science, 38 (2). pp. 231-241. ISSN 0125-2526

J

Jamaludin, Khairur Rijal and Harun, M. R. and Muhamad, N. and Sulong, A. B. and Mohamad Nor, N. H. (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. In: Advanced Materials Research. Scientific.net, pp. 1199-1203. ISBN 978-303785133-3

Jamaludin, Khairur Rijal and Muhamad, N. and Abolhasani, H. and Murtadhahadi, Murtadhahadi and Ab. Rahman, M. N. (2011) An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock. Advanced Materials Research, 264 (26). pp. 554-558. ISSN 1022-6680

K

Khairuddin, Uswah and Yusof, Rubiyah and Khalid, Marzuki and Cordova, F. (2011) Optimized feature selection for improved tropical wood species recognition system. ICIC Express Letters, Part B: Applications, 2 (2). pp. 441-446. ISSN 2185-2766

Khairur R. Jamaludin, (2011) Multiple performance optimization for the best metal injection molding green compact. Journal of Applied Sciences, 11 (9). pp. 1663-1667. ISSN 1812-5654

Khairur Rijal Jamaludin, (2011) An influence of a binder system to the rheological behaviour of the SS316L metal injection molding (MIM) feedstock. Advanced Materials Research, 264-26 . pp. 554-558. ISSN 1022-6680

Khairur Rijal Jamaludin, (2011) Injection molding temperature and power loading influence to the metal injection moulding (MIM) green compact. Scientific Research and Essays, 6 (21). pp. 4532-4538. ISSN 1992-2448

Khairur Rijal Jamaludin, (2011) Minimizing delaminating on medium density fiber board by Taguchi Method. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Khairur Rijal Jamaludin, (2011) Optimizing the sintering parameter of metal injection molding compact using robust engineering technique. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Khairur Rijal Jamaludin, (2011) Orthogol array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

L

Lim Meng Hee, (2011) Operational deflection shape analysis of rotor casing to diagnose transient blade rubbing faults. In: 14th Asia Pacific Vibration Conference (APVC 2011).

M

M., Abedi and M. S., Fathi and M. F. , Mohammad (2011) Major causes of construction delays under client category and contractor category. In: The First Iranian Students Scientific Conference in Malaysia, Apr 9 & 10, 2011, UPM, Malaysia. (Submitted)

M., Abedi and M. S. , Fathi and M. F., Mohammad (2011) Effects of construction delays on construction project objectives. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia. (Submitted)

M. H. I. Ibrahim, (2011) Optimization of micro metal injection molding ss 316l for the highest green strength by using Taguchi Method. Advanced Materials Research, 264-26 . pp. 135-140. ISSN 1022-6680

M. R. Harun, (2011) The development of metal injection moulding for ZK60 magnesium alloy using palm stearin based binder system. Advanced Materials Research, 230-23 . pp. 1199-1203. ISSN 1022-6680

Maslin Masrom, (2011) Enablers and barriers for e-commerce success in Malaysian small and medium enterprises. In: International Conference On Business And Information (BAI 2011).

Maslin Masrom, (2011) IT governance and small medium enterprise. In: 2011 International Conference On Computer And Business Management (ICCBM 2011).

Maslin Masrom, (2011) Metamorphic virus detection in portable executables using opcodes statistical feature. In: The 2nd International Scientific Conference (Icaseit).

Maslin Masrom, (2011) Morphing engines classification by code histogram. In: Symposium On Information And Computer Science (Ics) 2011.

Mazlan, Saiful Amri and Ismail, Izwan and Fathi, Mohamad S. and Rambat, Shuib (2011) An experimental investigation of magnetorheological (MR) fluids under quasi-static loadings. Key Engineering Materials, 495 . pp. 285-288. ISSN 1662-9795

Mazlan, Saiful Amri and Izwan, Zamzuri and Zamzuri, Hairi and Abdul Fatah, Abdul Yasser (2011) Compressive and tensile stresses of magnetorheological fluids in squeeze mode. International Journal Of Applied Electromagnetics And Mechanics, 36 (4). pp. 327-337. ISSN 1383-5416

Md. Zain, Md. Zaki (2011) Identification of Royal Malaysian Air Force technology needs as acredible air power. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Mohamad Nor N.H., (2011) Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Mohamad Syazli Fathi, (2011) An experimental investigation of magnetorheological (MR) fluids under quasi-static loadings. In: International Conference For Materials And Applications For Sensors And Tranducers (ICMAST 2011).

Mohd H. I. Ibrahim, (2011) Optimization of micro metal injection molding with multiple performance characteristics using grey relational grade. Chiang Mai Journal of Science, 38 (2). pp. 231-241. ISSN 0125-2526

Mohd. Aris, Siti Armiza and Taib, M. N. and Lias, S. and Sulaiman, N. (2011) Feature extraction of EEG signals and classification using FCM. Proceedings - 2011 UKSim 13th International Conference on Modelling and Simulation, UKSim 2011 . pp. 54-58. ISSN 978-076954376-5 (ISBN)

Mohd. Noor, Norliza and Mohd. Isa, Zakiah and Tawfiq, Omar Farouq and Abdullah, Norli Anida and Mohd. Rijal, Omar (2011) Statistical clustering of maxillary dental arches. Scientific Research and Essays, 6 (13). pp. 2710-2719. ISSN 1992-2248

Mohd. Syazli Fathi, (2011) Developing mitigation measures for delays in building construction projects : a case study in the city of Isfahan, Iran. In: International Construction Business & Management Symposium (Icbms 2011).

Mohd. Yusof Md.Daud, (2011) Finite element modelling in ultrasonic sheet metal forming. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Muazu, M. A., (2011) Parametric evaluation of tree root water-uptake effect on ground movement. International Journal of Physical Sciences, 6 (14). pp. 3468-3474. ISSN 1992-1950

N

Nor, N. H. M. and Muhamad, N. and Ariffm, A. K. and Ruzi, M. and Jamaladin, Khairur Rijal and Sufizar, A. (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Nor, N. H. M. and Muhamad, N. and Ibrahim, M. H. I. and Ruzi, M. and Jamaladin, Khairur Rijal (2011) Optimization of injection molding parameter of ti-6al-4v powder mix with palm stearin and polyethylene for the highest green strength by using taguchi method. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 126-132. ISSN 1823-0334

Nor Asikin Mohamad Nordin, (2011) New silica supported HCLO4 as efficient catalysts for estolide synthesis from oleic acid. Advanced Materials Research, 173 . pp. 140-145. ISSN 1022-6680

Nor H.M. Nor, (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Nor Hafiez Mohamad Nor, (2011) Characterization of titanium alloy feedstock for metal injection moulding using palm stearin binder system. Advanced Materials Research, 264-26 . pp. 586-591. ISSN 1022-6680

Norhisham Bakhary, (2011) Detection of concrete spalling using changes in modal flexibility. In: International Conference On Structures And Building Materials (Icsbm 2011).

R

R. C. Hasan, (2011) Combining angular response classification and backscatter imagery segmentation for benthic biological habitat mapping. Estuarine, Coastal and Shelf Science, 97 . pp. 1-9. ISSN 0272-7714

Radin Salim, Kamilah and Puteh, Marlia and Mohd. Daud, Salwani (2011) Levels of practical skills in basic electronic laboratory: students' perceptions. In: 2011 IEEE Global Engineering Education Conference (EDUCON). IEEE, USA, pp. 231-235. ISBN 978-161284643-9

Rosni Alkarimiah, (2011) Performance of an innovative multi-stage aerobic reactor during start-up period. African Journal of Biotechnology, 10 (54). pp. 11294-11302. ISSN 1684-5315

S

S. Chelliapan, (2011) Application of aerobic biotechnology for pharmaceutical wastewater treatment. IIOAB Journal, 2 (1). pp. 13-21. ISSN 0976-3104

Saiful Amri Mazlan, (2011) Experimental characterization of magnetorheological fluid in squeeze mode. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Salleh, Z. and Mazlan, E. M. and Mazlan, Saiful Amri and Hassan, N. A. and Patakor, F. A. (2011) A case study on the efficacy of technical laboratory safety in polytechnic. Proceedings of World Academy of Science, Engineering and Technology (53). pp. 760-764. ISSN 2010-376X

Sallehuddin Muhamad, (2011) Teaching aircraft design with flyable prototype. In: The 4th International Conference On Product Design & Development.

Shamsudin, Supiah and Ab Rahman, Azmi (2011) Fitting the distributions of wet spell duration with probability models. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, USA, 001-006. ISBN 978-145770005-7

Shamsudin, Supiah and Abdul Rahman, Azmi and Darom, A. R. M. (2011) Determination of detention pond sediment loads using monte carlo simulation, Malaysia. Journal of Environmental Hydrology, 19 . pp. 1-9. ISSN 1058-3912

Shreeshivadasan a/l Chelliapan, (2011) Effect of hydraulic retention time on up-flow aerobic stage reactor performance at constant loading in the presence of antibiotic tylosin. Brazilian Journal of Chemical Engineering, 28 (1). pp. 51-61. ISSN 0104-6632

Shreeshivadasan a/l Chelliapan, (2011) Influence of organic loading on the performance and microbial community structure of an aerobic stage reactor treating pharmaceutical wastewater. Desalination, 271 . pp. 257-264. ISSN 0011-9164

Shreeshivadasan a/l Chelliapan, (2011) Tolerance of the antibiotic tylosin on treatment perfomance of an up-flow aerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Shreeshivadasan Chelliapan , (2011) Historic waterfront and the sense of place: the case of two unesco world heritage sites of Malaysia. International Journal of Arts and Sciences, 1557-7 (4). pp. 50-66.

Sufizar Ahmad, (2011) Taguchi Method for the determition of optimised sintering parameters of titanium alloy foams. Advanced Materials Research, 264-26 . pp. 1731-1736. ISSN 1022-6680

Supiah Shamsudin , (2011) Uncertainty analysis of HEC-HMS model parameters using monte carlo simulation. International Journal of Modeling and Simulation, 0228-6 (4).

Syuhaida Ismail, (2011) Key performance indicators for public infrastructure project in Malaysia. In: The 12Th International Conference On Qir (Quality In Research) 2011.

Syuhaida Ismail, (2011) Procurement of relational contract in Malaysia: problems and challenges. In: 29th Conference Of The Asean Federation Of Engineering Organisations (CAFEO 29).

W

Wahab, Yussof and Othaman, Zulkafli and Hamidinezhad, Habib (2011) Ultra-sharp pointed tip Si nanowires produced by very high frequency plasma enhanced chemical vapor deposition via VLS mechanism. Journal of Materials Science, 46 (15). pp. 5085-5089. ISSN 0022-2461

Wahab, Yussof and Othaman, Zulkafli and Ismail, Abd. Khamim and Hamidinezhad, Habib (2011) Synthesis and analysis of silicon nanowire below Si-Au eutectic temperatures using very high frequency plasma enhanced chemical vapor deposition. Applied Surface Science, 257 (21). pp. 9188-9192. ISSN 0169-4332

Z

Zamzuri, Hairi and Zainal Abidin, Mastura Shafinaz and Ramli, M. S. A. (2011) Tracking human movement in office environment using video processing. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, Kuala Lumpur, pp. 1-6. ISBN 978-145770003-3

This list was generated on Mon Aug 31 01:07:09 2015 MYT.